Diagnostic Test Equipment

3 Diagnostic Test Equipment Dynatel Subscriber Loop Test Products 900 Series 278-292 www.3m.com/telecom www.3mtelecommunications.com 285

Dynatel Subscriber Loop Test Products 900 Series Rugged and portable for harsh environments, Dynatel test sets 900 Series offer the right mix of functions, from loop diagnostic routines to fault locating, transmission testing and combination test/terminal capabilities. 3M Dynatel Subscriber Loop Analyzer 965DSP 350 The Dynatel Subscriber Loop Analyzer 965DSP is a microprocessorcontrolled integrated test set that provides full-featured POTS, wideband and DSL-specific testing. The functions include fault location and repair verification on twisted-pair and drop cables (utilizing capacitance bridge, resistance bridge and Time Domain Reflectometer (TDR) functions). The Dynatel Subscriber Loop Analyzer 965DSP executes a wide range of individual tests, or performs automatic test routines to categorize and sectionalize problems. The hand-held 965DSP test set is housed in a lightweight, ergonomically designed case for portability and ease of handling. The unit is weather-resistant and weighs only 4.3 pounds (1.95 kg) with battery, test leads and soft case. 3M Dynatel Subscriber Loop Analyzer 965DSP/SA The Dynatel Subscriber Loop Analyzer 965DSP/SA delivers all the multi-function capabilities of the Dynatel 965DSP and provides a 351 Spectrum Analyzer and E, F and G noise-weighted filters. Wideband noise measurements are made with the E (ISDN/ISDL), F (HDSL) and G (ADSL) filters. The Spectrum Analyzer test function enables the operator to view the high-frequency communications spectrum and identify spectral interferers such as crosstalk noise generated by other services. Accessories and Replacement Parts pg. 291 286

3M Dynatel Subscriber Loop Analyzers 965DSP/ADSL and 965DSP/SA/ADSL and G filtered wideband noise measurements complete this comprehensive family of rugged loop testers. The units are weather resistant and weigh only three pounds (4.5 lbs. with test leads and soft case). Preserving the rugged dependability of all Dynatel products, the /ADSL option incorporates an innovative design that adds a durable spacer element to the current 965DSP molded plastic case. This spacer permits easy and robust expansion of the new circuit board in the existing test set. companion to the Dynatel 965DSP family of subscriber loop analyzers. The FED enhances technician productivity by connecting to the far end of a cable pair to enable diagnostic testing from the near end using the DTMF signaling capability of the 965DSP, 965DSP/SA, 965DSP/ADSL and 965DSP/SA/ADSL test sets. 352 The Dynatel Subscriber Loop Analyzers 965DSP/ADSL and 965DSP/SA/ADSL feature an Alcatel MTK-20150 modem chipset in the proven 965DSP platform. The 965DSP/ADSL provides the ability to perform active ADSL testing to address the growing number of residential and business ADSL customers. It delivers all the multi-function capabilities of the 965DSP plus the testing functions of the new ADSL modem. The 965DSP/SA/ADSL adds comprehensive DSL parametric measurements to this integrated solution. Extended loss measurement ranges, spectrum analyzer and E, F 353 3M Far End Device II Designed to provide remote controlled far end testing assistance during subscriber loop testing, the 3M Far End Device (FED) II is the perfect 354 3M Dynatel Subscriber Loop Tester 945DSP The Dynatel Subscriber Loop Tester 945DSP is a microprocessor-controlled test set that provides full-featured POTS testing. The 945DSP subscriber loop tester performs a wide range of voice band tests to analyze problems on twisted-pair cables. Weatherresistant and weighing only 1 pound, the hand-held 945DSP test set is housed in a lightweight case for portability and ease of handling. 287

Kit Contents for 3M Dynatel Subscriber Loop Test Products 900 Series Product 965DSP 965DSP/SA 965DSP/ 965DSP/ 945DSP Description ADSL SA/ADSL Standard Accessories Analyzer Nickel metal hydride battery pack AC adapter Specified test cables Alkaline battery holder Conductor strap Wire gauge Self-test circuit board Instruction manual ADSL modem Optional Optional Spectrum Analyzer Optional Optional Specified batteries 4 alkaline AA 1030 conductor gauge 054007-31253 054007-31253 054007-31253 054007-31253 054007-31253 Alkaline battery holder/adapter 051138-57685 051138-57685 051138-57685 051138-57685 110/220 VAC adapter 051138-58628 051138-58628 051138-58628 051138-58628 Softcase (Model 1151) 051138-87178 051138-87178 051138-87178 051138-87178 051141-04458 Nickel metal hydride battery pack 051138-57686 051138-57686 051138-57686 051138-57686 1144 Black/red test lead, 051138-57648 051138-57648 051138-57648 051138-57648 051138-57648 alligator, bed-of-nails 1142 Blue/yellow test lead, 051138-57649 051138-57649 051138-57649 051138-57649 alligator bed-of-nails 1143 Green test lead, alligator, 051138-57650 051138-57650 051138-57650 051138-57650 051138-57650 bed-of-nails Shorting strap, alligator 051138-58529 051138-58529 051138-58529 051138-58529 Optional Accessories Black/red test lead, 4 mm banana 051138-57608 051138-57608 051138-57608 051138-57608 Blue/yellow test lead, 4mm banana 051138-57610 051138-57610 051138-57610 051138-57610 Green test lead, 4mm banana 051138-57612 051138-57612 051138-57612 051138-57612 Shorting strap, 4 mm banana 051138-58532 051138-58532 051138-58532 051138-58532 Video training tape 054007-71941 Cigarette adapter 051138-57744 051138-57744 051138-57744 051138-57744 IR adapter cable 051138-58764 051138-58764 051138-58764 051138-58764 1342 Far End Device II 051138-87639 051138-87639 051138-87639 051138-87639 with alligator clips 1343 Far End Device II 051138-87640 051138-87640 051138-87640 051138-87640 (bed-of-nails Test clips) 1344 Far End Device II 051138-89794 051138-89794 051138-89794 051138-89794 (single needle) 288

Features of the 3M Dynatel Subscriber Loop Test Products 900 Series Features 965DSP 965 DSP-B 965DSP/SA 965DSP/ 965DSP/ 945DSP ADSL SA/ADSL Resistance fault locate Open fault locate Load coil count Optional Longitudinal balance Caller Identification (CID) Split fault locate Voltage measurement Tone source Current measurement Ohms measurement Soak Test Ohms-to-distance conversion Loss measurement Noise measurement Ringers count Optional Self-test and self-calibration Wideband noise/loss for ISDN and xdsl Line Prequalification tests for basic rate ISDN service TDR IR port (communication port) Stored results internal memory Communications craft set Measurement units Feet, meters, Feet, meters, Feet, meters, Feet, meters, Feet, meters, Feet, meters, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Fahrenheit, Celsius Celsius Celsius Celsius Celsius Celsius Graphic display (backlit) Auto diagnostic DC testing (loop) Auto diagnostic AC testing (transmission) High insulation resistance test Resistance difference and loop resistance Spectrum analyzer Optional Optional (includes E,F, G noise filters) Fast Kick test Onboard operating instructions ADSL active modem testing Optional Optional Optional 289

Ordering Information for the 3M Dynatel Subscriber Loop Test Products 900 Series Ordering 965DSP 965 DSP-B 965DSP/ 965DSP/ 965DSP/ 945DSP Information SA ADSL SA/ADSL Packaging 1/cs. 1/cs. 1/cs. 1/cs. 1/cs. 1/cs. Minimum order 1 each 1 each 1 each 1 each 1 each 1 each Nickel Metal Hydride batteries, 051138-57603 051138-57603 051138-57603 bed-of-nails clips, US Nickel Metal Hydride batteries, 051138-58528 051138-58528 051138-58528 4 mm banana plugs, multi-language Nickel Metal Hydride batteries, 051138-58643 bed-of-nails clips, US w/out TDR Bed-of-nails clips/ 051138-87220 c-message weighting Bed-of-nails clips/psophometric filter 051138-87221 Single needle clips/ 051138-87222 c-message weighting Single needle clips/ 051138-87223 psophometric filter TDR upgrade kit 051138-58770 290

Electrical Specifications for 3M Dynatel Subscriber Loop Analyzer 965DSP (A, B & SA) Main Functions Range Resolution Accuracy Voltage (DC) 0 to 99.9 V 0.1 V 1% ± 0.5 V 100 to 300 V 1 V 3% Voltage (AC) 0 to 99.9 V 0.1 V 1% ± 0.5 V 100 to 250 V 1 V 3% Current 0 to 59.9 ma 0.1 ma 1% ± 0.3 ma 60 to 110 ma 0.1 ma 2% Resistance and Soak Test 0 to 9999 Ω 1 Ω 1% ± 5 Ω With CO voltage 0 to 9999 Ω 1 Ω 1% ± 50 Ω 10 k to 99.9 kω 0.1 kω 1% 100 k to 999 kω 1 kω 3% 1 M to 9.9 MΩ 0.1 MΩ 3% 10 M to 99 MΩ 1 MΩ 5% 100 M to 990 MΩ 10 MΩ 10% Opens (no noise) 0 to 3,000 ft. (0 to 1000 m) 1 ft. (1 m) 1% ± 3 ft. (1 m) 3,000 to 10,000 ft. (1 km to 3 km) 1 ft. (1 m) 3% 10,000 to 50,000 ft. (3 km to 15 km) 10 ft. (10 m) 5% 50,000 to 100,000 ft. (15 km to 30 km) 100 ft. (100 m) 10% RFL Fault range 0 to 20 MΩ Resistance to 0 to 99.99 Ω RTS 0.01 Ω 0.1% of RTS ± 0.01 Ω fault (no noise) 100 to 999.9 Ω RTS 0.1 Ω 0.2% of RTS ± 0.01 Ω 1 kω to 7 kω RTS 1.0 Ω 1.0% of RTS ± 0.01 Ω Loss (& frequency) With 600 Ω Zin -40 to +10 dbm, 200 to 20kHz 0.1 db, 1Hz, 1kHz 0.5 db, 1% With 135 Ω Zin -50 to +2 dbm, 20 k to 1200 khz 0.1 db, khz 2 db, 1% Noise metallic 0 to 50 dbrnc (-90 to -40 dbm0p) 1 db 2 db Noise to ground 40 to 100 dbrnc (-50 to 10 dbm0p) 1 db 2 db Longitudinal balance 0 to 70 db 1 db 2 db 70 to 85 db 1 db Tone output ID 200 to 1000 Hz, fixed level Precision - 600 Ω Zout 200 to 9999 Hz, -20 to +1 dbm 1 Hz, 0.1 db 1% Hz, 0.2 db 10 k to 19.99 khz, -20 to +1 dbm 1 Hz, 0.1 db 2% Hz, 1 db Wideband - 135 Ω Zout 20 k to 1200 khz, 0 dbm 1 khz 1 db Dial mode DTMF, Pulse TDR Under typical conditions a 100, 200, 500, 1,000, 2,000 1 ft. (1 m) 0.6% range 500 ft bridge tap can be seen 5,000, 10,000, 20,000, 30,000 ft, at 18,000 ft on a 20,000 ft (30, 60, 150, 300, 600, 1,500 24 AWG cable. (150 m bridge 3,000, 6,000, 10,000 m) tap at 5500 m on a 6000 m 0.5 mm cable). Pulse width 5 ns, 34 ns, 235 ns, 1600 ns Fixed values Velocity input 0.50 to 0.99 (150 to 299 m/µs) 0.01 (1 m/µs) Modes Single trace, dual trace, differential, memory, crosstalk, peak Auto tests Same specifications as full tests See above See above SA Functions (ISDN/IDSL, HDSL, ADSL) ISDN (2B1Q) Link test Active/inactive Error test (US & Canada only) Near-end & far-end block errors 1 block error 1 block error DSL Loss (& frequency) -75 to +5 dbm, 20 khz to 1200 khz 1 db 1 db With 100 Ω or 135 Ω Zin Noise (with E, F, & G filters) Metallic with100 Ω/135 Ω Zin +10/+20/+30 to +90 dbrn 1 db 2 db Longitudinal with 10 kω Zin +40/+50/+60 to + 120 dbrn 1 db 2 db Wideband Spectrum Analyzer Range 10 khz to 1.8 MHz 5 Spans from 120kHz to 2 MHz Dynamic range -90 to +10 dbm Frequency resolution 1% of span Input impedance 135 Ω 291

Specifications for 3M Dynatel Subscriber Loop Analyzer 965DSP (A, B & SA) Physical Specifications Environmental Specifications Size H x W x D in. (cm) 10.3 x 4.7 x 3.2 (26.2 x 12 x 8.1) Operating temperature 0 to 140 F (-18 to 60 C) Net weight lbs. (kg) 4.3 (1.95) with battery Storage temperature -40 to 165 F (-40 to 75 C) and soft case Shipping weight lbs. (kg) 7.8 (3.54) Humidity 0 to 95%, non-condensing Material GE Xenoy Accessories Description Test leads U.S. 5 ft. (1.5 m) test leads with 2 mm gold-plated banana plugs on one end and chrome-plated alligator clips on other end (black/red, blue/yellow, green) European - 5 ft. (1.5 m) test leads with 2 mm gold-plated banana plugs on one end and 4 mm gold-plated banana plugs on other end (black/red, blue/yellow, green) RFL strap U.S. 1.5 ft. (0.5 m) with alligator clips on ends European 1.5 ft. (0.5 m) with banana plugs on ends AC/DC battery charger 100-250 Vac (50/60 Hz) input; 12 Vdc (1 A) output. For charging only. Do not operate when using charger. Soft case Heavy-duty fabric case for unit and test leads Battery holder Plastic holder for 6 AA (LR6) batteries Battery pack Custom 1.5 amp-hour nickel metal hydride Toolbox Functions Range Resolution Accuracy Load coil count 0 to 5 1 ±1 Ohms/distance 0 to 9999 ohms 0.01Ω calculator 0 to 99999 ft (0 to 30 km) 1 ft (0.1 m) Caller ID (U.S. & Canada only) Date, time, number, name Carrier level -4 to -32 dbm 1 dbm 2 dbm Self-calibrate Pass/fail Loop resistance 0 to 99.9 Ω 0.01 Ω 0.1% ± 0.01 Ω 100 to 999.9 Ω 0.1 Ω 0.2% ± 0.01 Ω 1000 to 7000 Ω 1 Ω 1.0% ± 0.01 Ω Resistance difference 0 to 99.99 Ω 0.01 Ω 1% of loop resistance ± 0.01 Ω Ground resistance 5 to 500 Ω 1 Ω 1% ± 1 Ω K-Test Loop resistance 0 to 7K Ω Fault ratio (Fault Res1) > twice (Fault Res2) Resistance to fault 0 to 99 Ω 0.01 Ω 5% (no noise) 100 to 999 Ω 0.1 Ω 5% 1K Ω to 3.5K Ω 1 Ω 5% Stored results 100 results of each, minimum (Autotest and TDR) Ringers 0.0 to 4.0 0.1 ringer equivalent General Specifications General Specifications Ruggedness Survives 5 ft. (1.5 m) drop in soft case Water-resistance Splashproof; may be used in light to moderate rain Standards Meets FCC part 15, class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity) EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe. Built to ISO9001 certification for manufacturing facilities. Built to Bellcore (Telcordia Technologies) TSY000078 manufacturing methods. Meets UL50 Rain Test. Language English and multi-languages Units Feet or meters, Fahrenheit or Celsius, dbrnc or dbm0p, m/us or Vp Battery life Rechargeable battery pack, 12 hours typical usage (no backlight), 4 hours typical (with backlight); typical usage defined as 30 minutes on, 30 minutes off Charging time Minimum 2.5 hours from low to full Keypad 24-key membrane keypad with tactile feedback Display in. (cm) 2.5 x 2.5 (74 x 74), 192 by 192 pixel resolution, backlight Note: Routine calibration is not recommended or required. 292

Specifications for 3M Dynatel Subscriber Loop Analyzer 965DSP Series with ADSL Modem Physical Specifications Size H x W x D in. (cm) 10.3 x 4.6 x 3.75 (26.2 x 11.7 x 9.5) Net weight lbs. (kg) with soft case and test leads 4.5 (2) Shipping weight lbs. (kg) 8 (3.6) Environmental Specifications Operating temperature 0 to 140 F (-18 to 60 C) Storage temperature -40 to 165 F (-40 to 75 C) Humidity Vibration Water Resistance Shock Safety Operational Specifications 0 to 95%, non-condensing Random 3-axis vibration for 20 minutes Meets UL50 Rain Test 10 drops on corners and sides from 30 in. (without soft case) and 10 drops on corners and sides from 60 in. (with soft case) IEC950 Product will incorporate all the features of the 965DSP and/or 965DSP/SA Subscriber Loop Analyzers at the accuracy currently specified for these products (see 965DSP family product documentation). ADSL Datalink capability is limited to link synchronization. No PING or data application capability is provided. Modem will initiate a connection with the far-end under operator command. Status messages indicating link progress will be returned. ANSI/ITU Standards Supported ITU G.992.2 (G.Lite), ITU G.992.1 (G.DMT), ANSI T1.413 Issue 2 ADSL Modes Reach Statistics Operating Modes ANSI, G.DMT, G.Lite, MultiMode Designed to synchronize at distances from 0 ft. to 18,000 ft. Actual and maximum upstream and downstream connect rates Upstream and downstream percent used ADSL line capacity Upstream and downstream noise margin Upstream and downstream signal attenuation Upstream and downstream power levels Modem manufacturer identification (ANSI mode only) Upstream and downstream FEC, CRC, and HEC counts Alarm codes including LOS, LOF, LCD and LOM Graphical display of bits-per-bin count for the DMT signal Captured Modem auto-disconnects from the far-end after statistics gathered Continuous Modem gathers statistics for up to ten minutes 293

Specifications for the 3M Dynatel Subscriber Loop Tester 945DSP Measurement Function Range Resolution Accuracy ± Size H X W X D in. (cm) 7.5 x 4 x 1.5 (19 x 10.2 x 3.8) Cord length ft. (m) 5 (1.5) Net weight lbs. (kg) 1 (.5) Shipping weight lbs. (kg) 1.5 (0.7) Operating temperature -30 to 140 F (-34 to 60 C) Storage temperature -40 to 140 F (-40 to 60 C) Relative humidity 0 to 95% Display in. (cm) 2.25 x 1.25 (5.7 x 3.2) AC voltage 0 to 75 V 1.0 V ±1 V 75 to 250 V 1.0 V ±3 V DC voltage 0 to ±100 V 1.0 V ±1 V ±100 to ±350 V 1.0 V ±3 V DC current 0 to ±110 ma 1.0 ma ±2 ma Resistance 0 to 999Ω 1Ω ±5 Ω or 3% 1KΩ to 9.9KΩ 100Ω ±3% 10KΩ to 999KΩ 1 KΩ ±3% 1MΩ to 9.9MΩ 100KΩ ±3% 10MΩ to 30MΩ 1 MΩ ±10% Noise metallic (with C-message weighting**) 0 to 60 dbrnc 1 db ±2 db Noise to ground (with C-message weighting**) 40 to 100 dbrnc 1 db ±2 db Opens 0-9999 ft. 1 ft. ±20 ft., ±5% 10K to 20K ft. 1K ft. ±5% 0 to 6000 m 1 m ±6 m, ±5% Ground Resistance 0 50 Ohm 1Ω ±3 Ω Loop Loss -50 to +10 dbm 1 db ±1 db Frequency during loss, single frequency only 200 to 5,000 Hz 1 Hz ±3 Hz Longitudinal Balance 0 to 65 db 1 db ±2 db Tone Output ID 577.5 Hz Precision - 600 ΩZout 404,1004,2804Hz 0 ±.5 dbm Power Source 4 - Disposable Alkaline (AA or LR6) but will accept user provided Ni-Cad or NiMH batteries with user provided external charger Typical battery life Alkalines: 40 hours of typical use, 15 hours continuous Over voltage protection 450 Vdc, 250 Vac. Between any leads to protect the internal circuit. Vibration Random 3-axis vibration at 12.5Grms for 20 minutes Rain proof/splash proof Meets UL50, rain test Shock 10 drops on corners and sides from 30 in. without the soft case and 10 drops from 60 in. in soft case EMI/EMC Meets FCC part 15, Class A: Digital Devices for the US, and EN55022 (radiated emissions), EN55024-2 (electrostatic discharge), EN55024-3 (radiated immunity), EN55024-4 (transient immunity) and IEC1010 (product safety) for Europe. Keypad ON/OFF switch, numeric key pads, which also function as the function keys. Function keys V (voltage), ma (loop current/ground resistance), Ω (resistance/soak test), OPENS, TONE, DB, AUTO Cal. Two non-testing function keys are * and #. ** Psophometric filter is available as a special order. 294

3M Dynatel Cable Length Meter/ Time Domain Reflectometer 940CLM/TDR With the 3M Dynatel Cable Length Meter/Time Domain Reflectometer 940CLM/TDR, technicians of all skill levels can perform a variety of timesaving tasks when installing or maintaining metallic cable. This lightweight, hand-held tester: identifies most clear-opens or dead-shorts and displays the distance to the event in seconds instantly measures and displays cable length in feet or meters continually measures voltage to identify live circuits transmits four different tone frequencies and patterns to trace hidden cables or identify cable pairs includes selectable automatic powerdown options (5, 15, 30 minutes or continuous) The versatile, compact Dynatel 940CLM/TDR provides installation and repair technicians one simple device that meets several key needs. They can use it to detect faults up to a distance of 2500 feet (750 meters); determine the length of cable, whether in a box, on a spool or behind a wall; measure and display voltages of up to 250 volts rms; and transmit any of four tone frequencies to trace hidden cable in walls and ceilings. The 940CLM/TDR includes a convenient, built-in library of over 60 cable types. The technician selects the type of cable to test, attaches the test leads and receives a reading of cable length or distance to an open or short. Compatible with all common cables, it features standard banana jack connectors that accommodate a variety of leads or connectors. The 940CLM/TDR can save valuable installation time by enabling technicians to determine how much cable they have to work with and to detect shorts or opens in it before work begins, instead of taking the risk that they may have to start over after wiring is well underway. When used with the 3M Dynatel Subscriber Loop Tester 945DSP, repair 355 technicians can use the 940CLM/TDR to pinpoint a fault location. Both the Dynatel Subscriber Loop Tester 945DSP and the Dynatel Cable Length Meter/Time Domain Reflectometer 940CLM/TDR are part of 3M s complete family of industry-leading testing solutions for telco, CATV and electrical installations. 295

3M Dynatel Cable Length Meter/Time Domain Reflectometer 940CLM/TDR Specifications Physical Specifications Size H x W x D in. (cm) 7.0 x 3.2 x 1.4 (17.8 x 8.1 x 3.6) Net weight (including batteries) 8.7 oz. (247 g) Environmental Specifications Operating temperature 32 to 122 F (0 to 50 C) Storage temperature 14 to 131 F (-10 to 55 C) General Specifications Power 4 AA alkaline batteries Battery Life Up to 12 hours continuous depending on temperature Display Graphical 122 x 32 pixels Length Accuracy +/- 2% plus +/- 2 ft. (with correct NVP) Resolution 1 ft. (0.2 m) Maximum 2500 ft. (750 m) Minimum 0 ft. (0 m) Voltage (True rms Responding) Range 0 250V (AC or DC) Accuracy +/- 3% plus 1 volt Tracing Tones Frequencies 575Hz, 977Hz, 1.0KHz, 7.82KHz Number of patterns 4 Fault Location Opens Accuracy +/- 2% plus +/- 2 ft. Resolution 1 ft. (0.2 m) Maximum 2500 ft. (750 m) Minimum 0 ft. (0 m) Shorts (R < 85Ω) Accuracy +/- 2% plus +/- 2 ft. Resolution 1 ft. (0.2 m) Maximum 2500 ft. (750 m) Minimum 0 ft. (0 m) 3M Dynatel Cable Length Meter/Time Domain Reflectometer 940CLM/TDR Ordering Information Product Name 940CLM/TDR 051115-15085 UPC 296

1. 356 2. 357 3. 358 4. 359 Subscriber Loop Tester/Analyzer Accessories for 965DSP Product Description Pkg. Min. UPC Order 051138- Cigarette lighter adapter accessory 1/cs. 1 each 57744 for Dynatel 965DSP (not pictured) 1. Alkaline battery holder for 965DSP 1/cs. 1 each 57685 2. 110/220 Vac adapter for 965DSP 1/cs. 1 each 58628 Soft case for 965DSP (not pictured) 1/cs. 1 each 57605 3. Nickel metal hydride battery pack 1/cs. 1 each 57686 for 965DSP Black/red test lead, alligator, bed of 1/cs. 1 each 57648 nails for 965DSP (not pictured) Black/red test lead, banana plugs for 1/cs. 1 each 57608 965DSP (not pictured) Blue/yellow test lead, alligator, bed 1/cs. 1 each 57649 of nails for 965DSP (not pictured) Blue/yellow test lead, banana plugs 1/cs. 1 each 57610 for 965DSP (not pictured) 4. Shorting Strap, alligator 1/cs. 1 each 58529 Shorting Strap, banana (not pictured) 1/cs. 1 each 58532 Green test lead, alligator, bed- 1/cs. 1 each 57650 of-nails for 965DSP Green test lead, banana plugs 1/cs. 1 each 57612 for 965DSP (not pictured) 5. Far end device for 965DSP 1/cs. 1 each 87639 6. IR Adapter Cable 1/cs. 1 each 58764 k 5. 360 297

3M Dynatel Product Customer Training Information Product Description Customer Training Seminars- Outside Plant Testing and Locating 3M Dynatel 965DSP Operation and Field Applications Workshop Workshop Summary: A hands-on workshop that covers all of the features and applications of the latest hardware and software version of the 965DSP. Each feature is covered button-by-button including all menus and sub-menus. Advanced features include wide-band testing with the FED II (far end device), the TDR (time domain reflectometer), the spectrum analyzer and the ADSL modem. Practical applications of each feature are covered by individual hands-on experience and by team exercises outdoors troubleshooting real OSP faults. Target Attendee: Technicians and supervisors that are knowledgeable about testing and troubleshooting telephone outside plant cable, splicing, cross-connects, pedestals and NIDS. Length: 4-1/2 days Price: $750 Location: Austin Plant, 11705 Research Blvd., Austin, TX 78759 Scheduling: Call 1-800-426-8688 then 984-4112 3M Dynatel 22XXM Underground Utility Locating, Cable Fault Locating and Electronic Markers Workshop Summary: A hands-on workshop that covers all of the features and applications of the latest hardware and software version of the 22XXM Series underground utility locators, cable fault locators and electronic marker systems. Each feature is covered button-bybutton. Practical experience is gained by outdoor exercises that are designed to reinforce the classroom theory. Target Attendee: Suitable for technicians and supervisors working in the areas of telephone, CATV, electrical power, water, wastewater and gas. No previous locating experience is required. Length: 1-1/2 days Price: $150 Location: Austin Factory, 11705 Research Blvd., Austin, TX 78759 Scheduling: Call 1-800-426-8688 then 984-4112 298

Notes 299

300 Notes