No. SJVN/P&C/PPR-NJHPS-1389(O&M)/2016- एसज व एन ल मट ड (भ रत सरक र तथ हम चल द श सरक र क स झ उपबम) (A Mini Ratna and Schedule A Company) (6X250MW न थप झ कड़ जल वद य त ट शन) पण एव स वद वभ ग, झ कड़, जल शमल, ह. 172201 फ न. 01782-275236,275459,275106, फ़ क स 01782-234049, 275106, http://www.sjvn.nic.in टन स ख य (TIN No.) 02011000291 सन स ख य (CIN No.) L40101HP1988GOI008409 Dated: NOTICE INVITING QUOTATION The open tender enquiries under one part bid system through e-tendering are herewith invited for supply of Butterfly Valves and Gate Valves for Generating Transformer oil cooler & Generating bearing oil coolers of 06 no s Generating Units for Power House, NJHPS, Jhakri as given below:- DESCRIPTION Qty. Unit Earnest Money In (Rs) Last Date & Time of Submission of filled in bids and Opening Butterfly Valves and Gate Valves for Generating Transformer oil cooler & Generating bearing oil cooler (Detailed description & technical specification and BOQ as per Annexure-A enclosed) Rs 4,900 (Rupees Four Thousand Nine Hundred only) Last date & time of the availability/ downloading of the bid documents 09.02.2016 at 12:00 Hrs. Last date of bid submission 10.02.2016 at 13:00 Hrs. Bid opening date 10.02.2016 at 14:00 Hrs. Note: 1. The detailed NIT along with Terms and Conditions shall be available at www.sjvn.nic.in, www.eprocure.gov.in & www.tenders.gov.in w.e.f. 20.01.2016. 2. The complete NIT along with price schedules shall be made available on https://sjvn.abcprocure.com. w.e.f. 20.01.2016. 3. The bids are to be submitted electronically through e-tendering at https://sjvn.abcprocure.com. एसज व एन ल मट ड क ओर स व रष ठ बन धक पण ए व स वद वभ ग एनज एचप एस, एसज व एन ल मट ड, झ कड़ -172201 Corporate
Sr No. 1. Technical Specifications Annexure-A Description & Specification Requirement Qty. Unit Butterfly Valve DN 150MM 2. Butterfly Valve DN 80MM 3. 4. Butterfly Valve DN 125MM Butterfly Valve DN 200MM 5. Gate Valve DN 125MM 6. Butterfly Valve DN 75MM Valve Type Butterfly Valve (Lugged Type) 15 Pcs. DN 150mm Type Wafer type soft seated butterfly valve Body Material Cast Iron as per IS210 FG260 phosphate & painted Body Design Single piece design with centering/supporting lugs Disc S.S. 316 Floating Disc Design Stem AISI 410 Ends Wafer suitable to get sandwiched between flanges (Lugged Type) Method Of Operation Manual Hand Lever Operated Leakage Rate 100% leak Tight Shut off pressure 10 bar Medium Transformer Oil Dimensions Butterfly valves 150mmNB, PN-1 (Flange dia-285mm, PCD- 241.7mm, No. of holes-8, Flange to flange distance-56.5 mm, M20 bolt) (Lugged Type) Valve Type Butterfly Valve (sandwiched Type) 7 Pcs. DN Type Body Material Disc Method Of Operation Leakage Rate Shut off pressure Medium Dimensions 80mm Wafer type soft seated butterfly valve Cast Iron as per IS210 FG260 phosphate & painted S.S. 316 Floating Disc Design Manual Hand Lever Operated 100% leak Tight 10 bar Transformer Oil Butterfly valves 80 mmnb, PN-1 (Flange dia-185mm, PCD- 145 mm, No. of holes-4, Distance between Flanges-40 mm) (Lugged Type) Valve Type Butterfly Valve, Type: (sandwiched type) 5 Pcs. DN 125mm PN 10 Body Material Cast Iron as per EN-JS 1030 or IS 210 Disc Stainless steel Stem Stainless Steel Corrosion protection Epoxy coating on inside & outside body parts Medium Hydraulic Oil Dimensions Butterfly valve DN125mm, PN-10, PCD-210.0 mm, No. of holes-08, M16 Bolt, Flange to Flange Distance-60mm Valve Type Butterfly Valve, Type: (sandwiched type) 5 Pcs. DN 200mm PN 10 Body Material Cast Iron as per EN-JS 1030 or IS 210 Disc Stainless Steel Stem Stainless Steel Corrosion protection Epoxy coating on inside & outside body parts Medium Hydraulic Oil Dimensions Butterfly valve DN-200mm, PN-10, PCD-295.0mm, No. of holes-08, M20 Bolt, Flange to Flange Distance-65mm Valve Type Gate Valve 5 Pcs. DN 125mm PN 16 Bar Body Material Cast Iron as per EN-JS 1030 or IS 210 Stem Stainless Steel Corrosion protection Epoxy coating on inside & outside body parts Medium Hydraulic Oil Dimensions Gate Valve DN-125mm, PN-16, PCD-210mm, no. of Holes 08, M-16 Bolt, Flange to Flange Distance-195mm, Flange Dia-250.0mm Valve Type Butterfly Valve, Type: Sandwiched type 5 Pcs. DN 75mm PN 10 Body Material Cast Iron as per EN-JS 1030 or IS 210 Disc Stainless Steel Stem Stainless Steel Corrosion protection Epoxy coating on inside & outside body parts Medium Hydraulic Oil Dimensions Butterfly valve DN-75 mm, PN-10, PCD-150.0mm, No. of holes-04, M10 Bolt, Flange to Flange Distance-50mm Note: 1. Testing shall be carried out as per the IS/IEC standard for pressure & leak tests. 2. The bidder(s) not offering item(s) as per above technical specification shall not be considered for the price bid evaluation for such item(s).
1 PPR-NJHPS-1389 1. General instructions: TERMS AND CONDITIONS OF PPR-NJHPS-1389(O&M) The bids are invited using e-procurement mode, so please read the instructions carefully and upload the filled in bids as per requirement of bid documents. The acknowledgement copy is to be sent as a proof for the bid submission through tendering. The Open Tender Enquiry through e-tendering under one part bid system is herewith invited for supply of Butterfly Valves and Gate Valves for Generating Transformer oil cooler & Generating bearing oil coolers of 06 no s Generating Units for Power House, NJHPS, Jhakri as per Technical specifications Annexure-A enclosed. 1.1 The SJVN Limited, hereinafter called "SJVN" / "Owner" is a Joint Venture of Govt. of India and Govt. of Himachal Pradesh having its registered office at Himfed Building, New Shimla - 171 009, have their Nathpa Jhakri Hydroelectric Power Plant with a capacity of 6x250 MW at Nathpa (Distt. Kinnaur) and Jhakri (Distt. Shimla) in the State of Himachal Pradesh, India. 1.2 SJVN has issued an invitation to bid as enclosed and will receive bids as set forth in the accompanying Bid documents. 1.3 Bids cannot be uploaded after the time & date fixed for receipt of bids as set out in the Invitation of Bid. 1.4 SJVN reserves the right to accept or reject any or all Bids without assigning any reason for such a decision. 1.5 All the cost and expenses incidental to preparation of the proposals, discussions and conferences, if any, including pre-award discussions with the Bidder, technical and other presentation including any demonstrations etc. shall be to the account of the Bidder and Owner shall bear no liability whatsoever on such costs and expenses. 1.6 Please note that bids in physical form shall not be entertained under any circumstances and are only to be submitted through e-tendering at https://sjvn.abcprocure.com. 1.7 DIGITAL SIGNATURES: To participate in e-tender, the bidder needs to have a valid Digital Certificate (Class IIA or higher) from a certifying authority of India as per the IT Act, 2000. Valid Digital Certificate must be installed in a computer system to login on website. Perform the below steps to confirm that valid digital certificate is available on your computer system: _ Open Internet Explorer. _ Select Tools menu from menu bar or (Press Alt + T on keyboard) _ Click on Internet Options >>Content >>Certificate button. Digital certificate should be viewed under Personal heading. 1.8 Requirement of Digital Signature Certificate Please enable ActiveX Controls & Plug-ins. (Tools->Internet Options-> Security- >Custom Level) Corporate
2 PPR-NJHPS-1389 Active-X controls need to be enabled in Internet browser. In order to ensure this, do the Following: I. In Menu Bar ---Click on Tools - Internet Options Security Click on Trusted Sites Icon Click on Sites button II. Add the following two websites in Trusted Sites :- https://sjvn.abcprocure.com & https://www.tpsl-india.in III. After that, click on tools menu of Internet explorer - Internet Options Security Click on Internet Icon. After Click on Custom Level button From below ActiveX controls and plug-ins ---- Select below 5 Items to be enabled (i) Download signed ActiveX controls select Prompt or Enable (ii) Download unsigned ActiveX controls select Prompt or Enable (iii) Initialize and script ActiveX controls not marked as safe for scripting select Prompt or Enable (iv) Run ActiveX controls and plug-ins-select Enable (v) Script ActiveX controls marked safe for scripting select Enable After completed this above selection----below option has available---reset custom settings--- Reset To: Select low or medium ---Click on OK Also, please check your system Date & Time it should be set as current date and time. In case of Digital Certificate based Login, user need to download & install "Signer" file available under Download Section at https://sjvn.abcprocure.com Download and Install "Intermediary Certificate" available under Download Section at https://sjvn.abcprocure.com. Please disable or uninstall Third Party Toolbar / Add-ons from Browser. 1.9 The contract & procurement process through e-tendering/e-procurement system is in process at NJHPS, SJVN Jhakri and hence this tender is to be processed through e- tendering/e-procurement system. The bids are to be filled and submitted online. To participate in e-tendering/e-procurement, it is requested to register with our website https://sjvn.abcprocure.com. The one year cost of registration on web site is Rs 2977/- (Rs 2600/- plus service tax @ 14.5 %) is payable directly to M/s e-procurement Technologies Ltd. The bidder should also have the Digital Signatures for security purpose. The detailed procedure for the registration is as under:- a. Go to the url:- https://sjvn.abcprocure.com In the home page click on vender Registration. b. Click on New Bidder s Registration link available on home page. c. You need to furnish individual details as well as of company details in registration form. d. After filling all mandatory fields, you need to click on submit button to complete the registration process. e. After submission of the form, the user id and password are generated in the form of Acknowledgement. f. The payment of annual registration fee amounting to Rs.2977/- is to be made through DD. Corporate
3 PPR-NJHPS-1389 g. The User ID will be activated after DD is received. Send the Acknowledgement copy and uploaded document below mentioned e-mail ID. For Registration enquiry and to activate User ID please call abcprocure Help Desk Centre +91-79-40016865 / 37 / 02 / 85 / 79 / 91 / 23 / 52 e-mail ID support@abcprocure.com and info@abcprocure.com 1.10 All the bidders are requested to get themselves registered well in advance to facilitate timely submission of the bid. In case bidders wait till last moment for uploading the bids and if any technical problem is encountered at that time, the bid closing date & time may elapse. 1.11 Down loading Bid Documents: Bidder to access e-tender portal of SJVN (http://sjvn.abcprocure.com) to access NIT document, after completing registration formality and successful login vendor need to process for Tender Fee / Document Fee (if any) and after that bidder can download detailed tender document. Download Document link is available at the end of every tender notice along with access to Corrigendum. 1.12 Bid Submission: (i) Bidder needs to login first on the tendering portal of SJVN (i.e. http://sjvn.abcprocure.com). (ii) Search tender by filling necessary searching criteria after Login. (iii) After finding the tender on the screen, click on the Dashboard. (iv) Click on Declaration and then click on I Agree. (v) Click on the Tender Fees & Pay the Tender Fees Online (if any). (vi) Click on EMD and pay the EMD on line. (vii) Click on Prepare Bid and fill necessary Forms (Schedules). (viii) After filling Price Bid Form click on Final Encrypt. (ix) After filling all Forms & final Encryption of Price Bid click on Final Submission. (x) After Final Submission bidder will get receipt of Final Submission of their Bid. 1.13 The link help manual and vendor help for submission of bids is also available on the website. For any assistance/ clarification for e tendering registration, submission of bid through e-tendering/ procurement, bidder may contact the following persons/ representatives of M/s abcprocure:- (i) Mr. Rakesh Panwar-M- 80913-81583, e-mail: rakesh.panwar@abcprocure.com (ii) Mr. Yash Modi, No. +91-79- 400 16 802, e-mail: yash@procuretiger.com (iii) Mr. Prashant Rajyaguru, No.079-400 16 828, e-mail: prashant@abcprocure.com (iv) Mr. Pankesh Kumar-Ph- 079-4001 6837, e-mail: pankesh@abcprocure.com (v) Mr. Pradip Parmar-Ph-079-4001 6865 e-mail: pradip@abcprocure.com (vi) Link Contact us available on the home page of https://sjvn.abcprocure.com The above persons are to be contacted for help/ assistance related to e tendering registration, submission of bid through e-tendering only. For any other clarifications regarding the tender bidder may contact the following persons/ representatives of M/s SJVN:- (i) Sh. Rajeev Kapoor: Telephone No. 01782-275459 (E-mail ID : rajeev.kapoor@sjvn.nic.in) (ii) Sh. Ajay Kumar: Mobile No. 09418014928 (E-mail ID : aj.kumar@sjvn.nic.in) Corporate
4 PPR-NJHPS-1389 (iii) Sh. Rajesh Negi: Mobile No. 09418475411/09736337411 (E-mail ID: rajeshkr.negi@sjvn.nic.in) (iv) Sh. Amardeep Daroch: Mobile No. 09418080652 (Email ID: amardeep.daroch@sjvn.nic.in) 2.0 Submission of Bids 2.1 The bids will be submitted electronically at designated places in various schedules. The schedules cannot be downloaded as they are to be filled online. The tender is called under one part system:- A) Price Bid Part which consist of following schedules:- (i) Schedule-1 (Page 1 of 1) - Schedule of Prices and Taxes & duties Remarks: The above dynamic schedule is to be filled ONLINE. The prevailing rate of taxes and duties is to be clearly mentioned in the Schedule of Taxes and Duties. In case nothing is mentioned or mentioned NIL then it shall be presumed that the rates quoted are inclusive of taxes and duties or else the taxes & duties are not applicable. The taxes & duties shall be paid as per applicable rate at the time of supply. Any increase in taxes & duties/ new introduction of taxes & duties/ levy by the Govt. shall be paid by SJVN Ltd. provided that such increase in taxes & duties/ new introduction of taxes & duties/ levy by the Govt. is made with in schedule delivery period as per PO, otherwise same shall be paid by the bidder. The entry tax for the entry of goods in Himachal Pradesh shall be paid by SJVN directly to concerned authorities. During bid evaluation, the bid of the bidders quantity outside from H.P. shall be loaded at applicable rate of entry tax. CST/VAT: C Form will be issued by SJVN Ltd. For this tender, thus Sale Tax has to be quoted accordingly by the bidder. B) Techno-Commercial part which contains the following:- (i) Schedule-2 Schedule of Deviations (ii) Schedule-3 General Information (iii) SJVN reserves the right to ask additional information if necessary after opening of the techno-commercial bid. (iv) EMD as per clause 6.0 below/copy of NSIC/MSE Certificate as per Sr. No. 6.0 below (v) Technical Literature/Leaflet of the offered products. (If any) (vi) Bank details duly authenticated by bank/ copy of cancelled cheque Remarks: All above dynamic schedules are to be filled ONLINE. The bidders have to fill all the required information in the above schedule. 3.0 The schedule for bid submission and opening is as under:- a. Bid Submission Date of availability of Tender at 20.01.2016 https://sjvn.abcprocure.com Last date for downloading tender documents 09.02.2016 at 12:00 HRS (IST) Corporate
5 PPR-NJHPS-1389 Bid Closing Date (Last Date and time for uploading of filled in bids) b. Bid Opening Bid Opening 10.02.2016 at 13:00 HRS (IST) 10.02.2016 at 14:00 HRS (IST). 4.0 The bidder is advised to keep visiting the websites as mentioned below for any notifications/ amendments from SJVN side regarding the tender:- (i) https://sjvn.abcprocure.com. (ii) www.sjvn.nic.in (iii) www.eprocure.gov.in. (iv) www.tender.gov.in. 5.0 Firm prices FOR Jhakri basis by road transport to be quoted and should be valid for 120 days from the date of opening of quotation. The prices should be inclusive of P&F Charges and any other misc. charges but exclusive of taxes and duties. JHAKRI is at a distance of approx.150 KM from Shimla on Hindustan Tibet Road (NH-22). 6.0 Cost of bid document and Bid Security / Earnest Money deposit (EMD) (ONLINE/ FDR/TDR) 6.1 The cost for purchase of bid document is NIL. 6.2 The bidder shall furnish, a bid security/ earnest money as part of the bid amounting to ` 4900/- (Rupees Four Thousand Nine Hundred only). 6.3 EMD of the bidder shall be forfeited, if the bidder withdraws or amends its bids or impairs or derogates from the bid in any respect with in the period of validity of the bid. The EMD of the successful bidder shall be retained as contract security until such period the contractor furnishes the required CPG or until supply the complete material. If the contractor fails to fulfill his obligations, the EMD, retained as contract security shall be forfeited. 6.4 Micro or Small Enterprises (MSE)/NSIC registered firms are exempted from the submission of the Tender document cost and EMD and must enclose (Upload scanned copy of the MSE/ NSIC certificate) for the same products as in NIQ above. If the MSE/ NSIC certificate does not contain the item/work as listed in our NIQ and no EMD is found enclosed, then SJVN may ask the bidder to submit the EMD. The bidder must also send the copy of the NSIC/MSE certificate by Fax/e-mail/post with reference to the present tender and should reach before the bid closing date. 6.5 The Cost of bid document and Earnest Money (EMD) shall be submitted using below mentioned facilities:- a) Credit Card b) Debit Card c) Net Banking d) NEFT/RTGS Credit Card/Debit Card/Net Banking: Bidder is required to add https://www.tpsl-india.in website in Trusted Zone as suggested above. Bidder needs to feed correct details while making the payment through online payment gateway. NEFT/RTGS: Corporate
6 PPR-NJHPS-1389 To make payment through NEFT/RTGS, bidders will get an auto generated e-mail which contains details of their Unique Bidder Code and when and how to do RTGS/NEFT and details pertaining to it. This information will also be available on screen under heading of NEFT/RTGS Instruction once bidder gets login. Once bidder deposit amount in Beneficiary account number provided to them, while making payment for document fees and EMD by RTGS/NEFT payment option at the document fees and EMD payment screen, bidder shall be able to view the funds already remitted by him/her through NEFT /RTGS as available. Please proceed to make the payment. Upon doing so, the required amount to be paid through the document fees and EMD, shall get appropriately deducted from the available balance and payment shall be confirmed in real time. This facility allows you to transfer lump sum amount to your Bidder ID account number as mentioned above via RTGS / NEFT. Bidder would be able to use the funds as and when require till the time balance is available in Bidder ID. Also, Bidder can transfer more amount as and when he/she require. Kindly note that the payment via RTGS / NEFT is required to be made one working day in advance in order to make it available in your Bidder ID. Hence please ensure that Bidder remit funds at least one day in advance before he/she would like to make the document fees and EMD payment through RTGS / NEFT option on payment gateway. Caution: Please ensure that you need to mention the correct beneficiary account number and IFSC code as mentioned above while making payment via RTGS / NEFT. In the event of funds remitted to wrong beneficiary account number, SJVN Limited or its Bank or its service provider would not responsible for the same. Remarks:- The EMD submitted in the form of BG, DDs, local Cheque/ outstations Cheque will not be considered 6.6 FDR/TDR:- Please note that EMD (Earnest Money Deposit)/ Bid Security in the form of FDR/TDR (Pledged in favour of NJHPS, SJVN Ltd., Jhakri) is also acceptable and the same in physical form should reach before the last date & time of submission of bid. If EMD in the form of FDR/TDR does not reach in physical form before the last date & time of submission of bid, then bid of the firm shall be rejected. 7.0 (a) In case bidder is a Micro or Small Enterprises under the Micro Small and Medium Enterprises Development Act 2006, the bidder shall submit the following : (i) Documentory evidence that the bidder is a Micro or Small Enterprises registered with District Industries Centres or Khadi and Village Industries Commission or Khadi and Village Board or Coir Board or National Small Industries Corporation or Directorate of Handicrafts and Handloom or any other body specified by Ministry of Micro, Small and Medium Enterprises for the same products as in NIQ above. (ii) If the MSE is owned by SC/ST Enterprises, the bidder shall furnish appropriate documentory evidence in this regard. (iii) The above documents submitted by the bidder shall be duly certified by the statutory Auditor of the bidder or a practicing Chartered Accountant (not Corporate
7 PPR-NJHPS-1389 being an employee or a Director or not having any interest in the bidder s company/ firm) where audited accounts are not mandatory as per law. (b) If the bidder does not provide the above confirmation or appropriate document or any evidence, then it will be presumed that they do not qualify for any preference adimmisble as above. (c) No EMD (bid security) is required to be paid by an MSE participating in the bidding process. However, MSE s shall not be exempted from submission of Performance Guarantee. (d) Tender document shall be issued free of cost to all MSEs participating in the bidding process. (e) Purchase preference will be applicable as per extant GOI Policy. 8.0 Delivery Period: The delivery of the material is to be completed within 90 days from the date of issue of Supply order. 9.0 Payment Term: a) 100% percent Payment of the Ordered Value including taxes (100%) shall be made within 30 days after delivery of the full material at O&M store, NJHPS, SJVN, Jhakri and on submission of following documents to the consignee for release of payment:- (i) Bills in Triplicate. (ii) Copy of TIN no. (iii) Inspection Report (iv) Guarantee Certificate (v) MDCC Certificate b) The payment shall be released through electronic fund transfer and hence you are requested to give your bank account detail along with RTGS/IFSC code of your bank branch. Bank charges if any, shall be borne by you. The details to be submitted in the schedule as enclosed. c) As per SJVN policy, no advance payment can be given. d) All the payments for the supplies and/or services (as applicable) rendered by MSEs (Micro & Small Enterprises) supplier/contractor under the contract shall be released within forty five (45) days from the day of acceptance. Day of acceptance means day of actual delivery of goods or the rendering of services; or where any objection is made in writing by SJVN regarding acceptance of goods or services within fifteen days from the date of delivery of goods or the rendering of services, the day on which such objection is removed by the contractor/supplier. In case payments are not released as mentioned above, SJVN shall pay the principal amount plus compound interest with monthly rests from the date immediately following the date agreed upon @ three times of bank rates as notified by Reserve Bank of India time to time. Corporate
8 PPR-NJHPS-1389 e) All the payments for the supplier and/or services (as applicable) rendered by non-mses (Non- Micro & Small Enterprises) supplier/ contractor under the contract shall be released within forty five (45) days from the receipt of invoices/bills from the contractor/ supplier complete in all respects. In case payments are not released as mentioned above, SJVN shall pay the principal amount plus simple interest from the date immediately following the date agreed upon @ 8% p.a. 10.0 Guarantee: The material under the scope of supply shall be under guarantee for a period of 12 months from the date of supply against any manufacturing defect under normal working condition. 11.0 Pre-Dispatch Inspection: The pre-dispatch inspection of the material shall be carried out by authorized representative of SJVN at Ex- works of bidder before the dispatch of the material as per technical specification Annexure-A and MDCC shall be issued accordingly after PDI. The bidder shall submit the inspection call 15 days in advance to the consignee 12.0 Final Inspection: Final Inspection of the material shall be carried out by authorized representative of SJVN at Store, NJHPS, SJVN Ltd. Jhakri. 13.0 The purchaser reserves the right to increase /decrease the quantity at the time of placing the supply order. 14.0 The purchaser reserves the right to reject any or all the quotations without assigning any reason. 15.0 L. D. Charges: If the material is not supplied within stipulated period of delivery, then liquidated damages charges @ ½% per week or part thereof subject maximum to 5% shall be levied on ordered value. 16.0 Deviations: Any deviation from the NIQ should be recorded in deviation schedule only i.e. Online Schedule of Deviations. Deviation mentioned at other places than the Deviation Schedule will not be considered. 17.0 In case if it happens to be a holiday/network problem, bid will be opened on the next working day at the same place and time. 18.0 Any general documents like scanned copies of EMD (if any), price list/ any Central Govt./Govt./PSU sector copy(s) of supply order of same items for price justification etc. (if required) are to be uploaded along with the bid. 19.0 Bid Opening and Evaluation The Owner will open all bids electronically in the presence of bidder's representatives who choose to attend the opening at the time, on the date and at the place specified in the NIT / NIQ. Bidder's representatives shall sign a register as proof of their attendance. In the event of the specified date for the opening of bids being declared a holiday for the Owner/network problem, the bids will be opened at the appointed time on the next working day. No Mobile Phone will be permitted inside the bid opening room. Therefore, bidders should deposit Mobile Phones with Security gate at Reception. Corporate
9 PPR-NJHPS-1389 Bids will be evaluated on item rate basis FOR Jhakri including all taxes & duties. During the bid evaluation entry tax at an applicable shall be loaded on prices of bidders quoting outside state of H.P. Award will be placed on L1 bidder on FOR Jhakri basis on item rate basis. No price preference shall be give to any bidders during the bid evaluations. Cost loading will be carried out for the deviations taken by the bidder to determine the lowest evaluated Bid which will be considered for acceptance. 20.0 Clarification of Bids During bid evaluation, the Owner may, at its discretion, ask the Bidder for a clarification of its bid. The request for clarification and the response shall be in writing, and no change in the price or substance of the bid shall be sought, offered or permitted. 21.0 Correction of Errors (Applicable to extent possible) A. The errors /discrepancies in respect of the specified amount in Bid Proposal Sheets for an individual item and/or sub-item and/or in the sub-total of a schedule and/or in the Grand total of a schedule and/or in the lump sum price of the package either due to discrepancy between figures and words and/or simple arithmetical error while adding and/or multiplying and /or due to wrong extension of unit rates etc. the error will be rectified and computed by SJVN Ltd. as per the following method: (i) (ii) (iii) (iv) In case of discrepancy between figure and words the value specified in the words will be considered for computation. Firstly the unit rates in words will be considered for computation. In case unit rates are not indicated in words then unit rates indicated in figure will be considered and will be used for deriving the amount from the quantities specified in the bid documents. In case error is due to wrong extension of quantities, the quantities as specified in the bid documents will be considered and multiplied by the quoted unit rates to obtain the amount. The amounts will be computed as per the extension of amount on the basis of unit rates of individual item, sub-item, sub-total of a schedule, grand total of a schedule and lump sum price of the package based on the above consideration. B. After computation of the amounts as above, the values as computed shall be considered for evaluation as well as for award. If the bidder does not accept the above consideration, his bid will be rejected and the Bid Security / EMD may be forfeited. C. The Owner's determination of a bid's responsiveness is to be based on the contents of the bid itself without recourse to extrinsic evidence. If a bid is not substantially responsive, it will be rejected by the Owner, and may not subsequently be made responsive by the Bidder by correction of the non-conformity. 22.0 Consignee: Sr. Manager (Store), NJHPS, SJVN Ltd., Jhakri Corporate
10 PPR-NJHPS-1389 23.0 The material is to transport through Registered Common Carrier only (Registered Common Carrier mean the carrier registered with a State Transport Authority or a Regional Transport Authority) एसज व एन ल मट ड क ओर स व र ब धक पण एव स वद वभ ग, एन.ज.एच.प.एस, एस.ज. व.एन. ल मट ड., झ कड़ ( ह..)-172201 Corporate