ALEXA & AMIRA. Price List 05/2015

LEX & MIR Price List 05/2015

LEX & MIR Price List 05/2015 TBLE OF CONTENTS MIR Camera Sets MIR Camera Sets ccessory Bundles & Lens Mount Bundles MIR ccessory Bundles & Lens Mount Bundles Lens Mounts, Battery dapters & Viewfinder MIR Lens Mounts & Lens dapters MIR Battery dapters MIR Viewfinder Mechanical and Electronic ccessories MIR Camera Support MIR Mechanical and other ccessories MIR Cables Licenses MIR Extended Warranty MIR Licenses MIR and LEX Media, Cables and other ccessories MIR and LEX Media and Reader MIR and LEX Cables and other ccessories LEX Camera and Viewfinder Sets LEX Basic Camera Sets LEX Pro Camera Sets LEX Viewfinder Sets Upgrades and License Keys LEX Upgrades LEX License Keys 3 5 6 6 6 7 7 8 9 10 11 11 12 14 15 16 18 ll sales are subject to our General Sale and Delivery Terms and Conditions for Merchants dated 01.01.2006 Prices, specifications and technical data contained herein are subject to change without notice Terms of delivery: Ex factory Munich, packing, shipping and insurance charges not included. VT not included Export of all RRI products to other countries only with RRI s previous consent in writing Effective 01. 05.2015. ll previous price lists are obsolete Technical Data are subject to change without notice

LEX & MIR Price List 05/2015 TBLE OF CONTENTS Media, Media dapters and Docks SXR Media, dapters and Docks XR Media, dapters and Docks CFast 2.0 Media, dapters and Docks SxS Media, dapters and Docks SD Media Filters LEX FSND Filters Viewfinders LEX Electronic Viewfinder and ccessories LEX Optical Viewfinders and ccessories LEX Studio Ground Glasses and Frameglow Masks Electronic ccessories LEX Remote Control RCU-4 LEX Battery dapters LEX Cables LEX Other Electronic ccessories Mechanical ccessories LEX Camera Support LEX Hand Held, Handles and Mounts LEX Other Mechanical ccessories LEX Cases Service and Testing LEX Extended Warranties LEX Service MIR and LEX Notes MIR and LEX Notes 19 20 21 21 22 23 24 25 27 29 29 30 31 32 33 34 35 36 36 37 ll sales are subject to our General Sale and Delivery Terms and Conditions for Merchants dated 01.01.2006 Prices, specifications and technical data contained herein are subject to change without notice Terms of delivery: Ex factory Munich, packing, shipping and insurance charges not included. VT not included Export of all RRI products to other countries only with RRI s previous consent in writing Effective 01. 05.2015. ll previous price lists are obsolete Technical Data are subject to change without notice

Price List MIR Camera Sets 05/2015 MIR Camera Sets 110 MIR Camera Sets MIR is a versatile documentary-style camera, combining the exceptional LEX image quality with a highly ergonomic design optimized for single-operator use and extended shoulder-mounted operation. Ready to pick up and shoot, MIR is hardy enough to take anywhere, and features in-camera grading, as well as up to 200 fps slow motion. Wherever you are headed and whatever you need to shoot, let MIR be your companion. Note: for lenses see the 'RRI Lenses' price list. Specific discounts are available for certain lenses combined with a MIR camera set on the same order. Bridge plates, bridge plate adapters, support rods and lens supports can be found in the "Pro Camera ccessories for LEX & MIR" price list. 110 MIR Camera Sets K0.0001090 MIR Camera Set - Most Economical 25.980 35 format documentary-style digital camera with an electronic viewfinder and a 16:9 active sensor area. Records onto CFast 2.0 cards. HD video output via HD-SDI. Exposure through electronic rolling shutter: 5.0-356.0. Features include HD 1080i & 1080p recording at 0.75-100 fps to QuickTime ProRes 422 LT or 422 files with Rec 709 encoding; 3 Looks with image parameters for knee, gamma, saturation & other adjustable in the camera, focus and exposure control tools. includes: K1.71700.0 1x MIR camera body, camera handle, viewfinder mount, viewfinder cables, USB stick K2.75004.0 1x MIR Viewfinder MVF-1 Note: CFast 2.0 cards, lens mount, battery adapter and camera base mount are not included and need to be ordered seperately or as part of an accessories bundle and/or lens mount bundle. K0.0001091 MIR Camera Set with dvanced License - The llrounder 28.980 35 format documentary-style digital camera with an electronic viewfinder and a 16:9 active sensor area. Records onto CFast 2.0 cards. HD video output via HD-SDI. Exposure through electronic rolling shutter: 5.0-356.0. 10.0001093 - dvanced license key provides HD 1080i & 1080p recording at 0.75-200 fps to QuickTime ProRes 422 LT, 422, or 422 HQ files with Rec 709 or Log C encoding; Complete CDL and video look functions; import looks without 3D LUT; focus and exposure control tools; dynamic auto tracking white balance; remote control; Bluetooth audio monitoring; pre-recording function. Features additional to basic MIR set: 100-200 fps recording; ProRes 422 HQ codec; Log C encoding; more look functions including import/export and SC CDL in-camera grading; dynamic auto tracking white balance; remote control; Bluetooth audio monitoring; pre-recording function. includes: K1.71700.0 1x MIR camera body, camera handle, viewfinder mount, viewfinder cables, USB stick K2.75004.0 1x MIR Viewfinder MVF-1 Note: CFast 2.0 cards, lens mount, battery adapter and camera base mount are not included and need to be ordered seperately or as part of an accessories bundle and/or lens mount bundle. Page 3

Price List MIR Camera Sets 05/2015 K0.0001092 MIR Camera Set with Premium License - ll Included 32.980 35 format documentary-style digital camera with an electronic viewfinder and a 16:9 active sensor area. Records onto CFast 2.0 cards. HD video output via HD-SDI. Exposure through electronic rolling shutter: 5.0-356.0. 10.0001095 - Premium license key provides HD 1080i & 1080p or 2K (2048 x 1152) recording at 0.75-200 fps to QuickTime ProRes 422 LT, 422, 422 HQ, or 4444 files with Rec 709 or Log C encoding; Complete CDL and video look functions; import looks with or without custom 3D LUTs; focus and exposure control tools; dynamic auto tracking white balance; remote control; Bluetooth audio monitoring; Pre-recording function. Features additional to dvanced MIR set: 2K (2048 x 1152) recording; ProRes 4444 codec, Support for Looks including a custom 3D LUT. includes: K2.75004.0 1x MIR Viewfinder MVF-1 K1.71700.0 1x MIR camera body, camera handle, viewfinder mount, viewfinder cables, USB stick Note: CFast 2.0 cards, lens mount, battery adapter and camera base mount are not included and need to be ordered seperately or as part of an accessories bundle and/or lens mount bundle. Page 4

MIR ccessory Bundles & Lens Mount Bundles 120 MIR ccessory Bundles && Lens Lens Mount Mount Bundles Bundles - MIR ccessory Bundles can be combined with any MIR model. - Discounted bundle pricing: Only one ccessory Bundle and one Lens Mount Bundle can be ordered per MIR camera unit order (must be on same order). - Lens mount(s) (K2.0001107, K2.0001237, K2.0001103) or Lens Mount Bundle (K0.0001247) need to be ordered seperately. - Battery dapter Gold mount (K2.75001.0) or V-lock (K2.75002.0) need to be ordered seperately 120 MIR ccessory Bundles & Lens Mount Bundles K0.0001244 ccessories Bundle I new price 2.240 The most affordable accessory bundle for the MIR camera. includes: K2.75000.0 1x Wedge Plate dapter WP-1 K2.0003623 2x CFast 2.0 Card 128 GB K2.0001242 1x CFast 2.0 Card Reader K2.75005.0 1x Microphone Holder Bracket MHB-2 K2.0001223 1x Shoulder Belt dapters, SB-1 K2.0001240 1x MIR Camera Bag K0.0001245 ccessories Bundle II new price 3.301 Typical documentary style accessory bundle for the MIR camera. K2.75000.0 1x Wedge Plate dapter WP-1 K2.0003623 3x CFast 2.0 Card 128 GB K2.0001242 1x CFast 2.0 Card Reader K2.75005.0 1x Microphone Holder Bracket MHB-2 K2.0001223 1x Shoulder Belt dapters, SB-1 K2.0000399 1x Quick Release Plate, QRP-1 K2.0001240 1x MIR Camera Bag K0.0001246 ccessories Bundle III new price 5.888 The most flexible accessory bundle for the MIR camera. K2.75000.0 1x Wedge Plate dapter WP-1 K2.75006.0 1x Bridge Plate dapter BP-3 K2.0003623 5x CFast 2.0 Card 128 GB K2.0001242 1x CFast 2.0 Card Reader K2.75005.0 1x Microphone Holder Bracket MHB-2 K2.0001221 1x Universal dapter Plate UP-2 K2.0001297 1x Viewfinder ttachment Bracket VB-1 K2.72007.0 1x Center Camera Handle (CCH-1) K2.0001222 1x Viewfinder dapter VF-2 K2.0000399 1x Quick Release Plate, QRP-1 K2.0001239 1x MIR Camera Case K0.0001247 Lens Mount Bundle 6.150 Three lens mounts for the MIR camera. K2.0001103 1x EF lens mount K2.0001237 1x B4 Lens Mount K2.0001107 1x PL LDS Lens Mount Page 5

MIR Lens Mounts, Battery dapters & Viewfinder 130 MIR Lens Mounts, & Battery Lens dapters dapters & Viewfinder 130 MIR Lens Mounts & Lens dapters K2.0001107 PL LDS Lens Mount 1.180 MIR PL LDS lens mount for PL mount lenses. Includes 12pin Hirose connector for ENG style lenses. K2.0001237 B4 Lens Mount 3.980 MIR B4 lens mount with optical, mechanical and electronic interfaces for B4 mount lenses. K2.0001103 EF lens mount 1.180 MIR EF lens mount with interface for iris control. K2.0001238 PL to B4 Lens dapter 2.980 mechanical and optical adapter that allows the use of B4 mount lenses on cameras with a PL mount. MIR Battery dapters Battery adapters provide a connection between a third party on-board battery and the MIR. 140 MIR Battery dapters K2.75001.0 Gold Battery dapter 395 ttaches to the back of the MIR camera and accepts Gold mount on-board batteries. Batteries can be hot-swapped. K2.75002.0 V-lock Battery dapter 395 ttaches to the back of the MIR camera and accepts V-lock on-board batteries. Batteries can be hot-swapped. MIR Viewfinder 150 MIR Viewfinder K2.75004.0 MIR Viewfinder MVF-1 5.280 The viewfinder is included in the MIR K0 camera packages and does not need to be ordered separately when ordering a K0 camera package K4.0003785 MVF-1 Eyepiece Upgrade New 980 Largely extended range for positioning the eye in a vertical and horizontal direction. Includes an improved position for the approach sensor with increased compatibility for left eye operators and also for using individual eyecushions. Only for MVF-1 with serail number 2150 and below, MVF-1 with serial number 2151 and higher do include this upgrade already. Page 6

MIR Mechanical and Electronic ccessories 140 MIR Mechanical Camera Support and Electronic ccessories Please note that the RRI "Quick Release Plate QRP-1" for WP-1 (K2.0000399),"Shoulder Belt dapters SB-1" (K2.0001223) and a "Handgrip Set Right" (K0.0001249) can be found in the 'Pro Camera ccessories for LEX & MIR' price list. Follow focus units, matte boxes, tripod heads, mounting arms, dovetail and 3/8-16 adapters can be found in the "Pro Camera ccessories" price list. 160 MIR Camera Support K2.75000.0 Wedge Plate dapter WP-1 545 ENG style camera base mount with new softer shoulder pad and wedge plate adapter. K2.0003675 Shoulderpad for WP-1 New 95 New, softer shoulderpad for WP-1, can be exchanged by customer or by service order. K2.75006.0 Bridge Plate dapter BP-3 645 camera base mount compatible to accessories like BP-8/BP-9 for 19/15mm rods etc. K2.0001221 Universal dapter Plate UP-2 458 Universal dapter Plate UP-2 with 15mm rod mounting receptacles. ttachable to the dove tail on top and bottom of MIR. Can be used for regular or low mode Steadicam use. Note: availability may be pending at initial product launch. K0.0001280 Universal dapter Plate UP-2 Set 933 K2.0001297 1x Viewfinder ttachment Bracket VB-1 K2.72007.0 1x Center Camera Handle (CCH-1) K2.0001221 1x Universal dapter Plate UP-2 MIR Mechanical and other ccessories 170 MIR Mechanical and other ccessories K2.0004024 MIR Onboard Microphone Set 458 New MIR Onboard Microphone set: TinyMike set is a small and light solution from mbient including microphone, suspension, foam windshield, XLR cable and windgag. It suits perfectly as onboard microphone. The MIR microphone holder MHB-2 (K2.75005.0), providing the perfect connection to the camera, needs to be ordered seperately. K2.75005.0 Microphone Holder Bracket MHB-2 98 Bracket to attach a on-camera microphone to the camera handle. Includes 3/8' and 1/4' knurled fasteners. K2.0001297 Viewfinder ttachment Bracket VB-1 229 n attachment that allows the MIR viewfinder to be mounted to two 15 mm lightweight rods above the lens, as can be found on the Universal dapter Plate UP-2 (K2.0001221). This bracket is already included in the Universal dapter Plate UP-2 Set (K0.0001280). K2.0001239 MIR Camera Case 425 MIR camera case (Peli 1510 carry on case, cabin size, foam fitted for MIR & MVF, RRI MIR branded) K2.0001241 ccessories Case 319 RRI branded Peli 1510 Carry On case for accessories, cabin size with flexible dividers K2.0001240 MIR Camera Bag 345 RRI MIR branded soft carry bag. For MIR camera with MVF-1, camera adapter and zoom lens. K2.0004025 MIR Raincover New 259 proven camrade raincover to protect MIR against heavy rain and more K4.0003189 udio Board Upgrade (IOU 2) New 690 In order to allow higher input levels with the line audio input on MIR, a new extended audio board is available for upgrade. This new audio board allows +24dBu input level in addition to the +8dBu with the current board. It also allows the headphone out to be looped through a connected mixer. The new audio board is available at the RRI service stations as a chargeable upgrade. Page 7

MIR Mechanical and Electronic ccessories MIR Cables For more cables see section 'Media, Cables and other ccessories' below 180 MIR Cables K2.75007.0 MIR Power Cable Straight (2m, 6.6 feet) KC-50 135 Connects the BT MIR power input to a battery power output with an XLR 3 pin connector. K2.0001275 MIR Power Cable Coiled 165 Connects the BT MIR power input to a battery power output with an XLR 3 pin connector. K2.0003823 MIR Viewfinder Cable Short (0.5m, 1.6 feet) 45 Connects the MIR Viewfinder MVF-1 to the MVF socket on the camera (spare part). K2.0003822 MIR Viewfinder Cable Medium (1m, 3.3 feet) 49 Connects the MIR Viewfinder MVF-1 to the MVF socket on the camera (spare part). For a longer distance between viewfinder and camera. K2.0001274 MIR Viewfinder Cable Long (3m, 9.8 feet) 58 Connects the MIR Viewfinder MVF-1 to the MVF socket on the camera (spare part). For a long distance between viewfinder and camera. K2.0001268 12/20pin Hirose ENG Lense Cable Short (0.25m, 0.8 feet) 145 For ENG type lenses for power and data connection K2.0001269 udio XLR Cable 5pin Male to 5pin Female Short (0.4m, 1.3 feet) 36 To connect an on-board camera stereo microphone to the stereo XLR input. K2.0001270 udio XLR Cable 5pin Male to 3pin Female Short (0.4m, 1.3 feet) 36 To connect an on-board camera mono microphone to the stereo XLR input (left channel) K2.0001271 udio XLR Cable 3pin Male to 3pin Female Short (0.4m, 1.3 feet) 36 To connect an on-board camera mono microphone to the mono XLR inputs B or C. Page 8

Price List MIR Licenses 05/2015 150 MIR Licenses Extended Warranty 115 MIR Extended Warranty 100.006.375 MIR Extended Warranty (price per year) New 950 The MIR extended warranty is designed to reduce the fixed cost of ownership after the camera's first year of warranty has expired. It covers one MIR camera for contracted period of time* for all parts and labor required due to defects in materials or workmanship that prevent the camera, any installed options and the viewfinder from operating within factory specifications. There is never any time lost waiting for purchase orders or payments that would otherwise be needed for out of warranty repairs. dditionally, cameras covered under warranty (original or extended ) go into a priority repair queue and so downtime is reduced to the absolute minimum. Must be purchased at the time of purchase of camera. Extended warranties purchased afterwards require a certification process of the camera by an official RRI service station at extra cost. * There is no automatic renewal, but a predefined and contracted expiration date, which can be extended on demand within the warranty period. Page 9

Price List MIR Licenses 05/2015 MIR Licenses License keys can be purchased from the RRI License Shop at http://alshop.arri.de. Each license key is coded to a single camera's serial number. 190 MIR Licenses 10.0001093 MIR dvanced License Key 3.300 dds the following features permanently to the MIR camera features: Framerates 100-200 fps; Recording format ProRes 422 (HQ); Log C; Unlimited Look functions; Import Looks; SC CDL in-camera grading; Dynamic uto Tracking Whitebalance; Remote Control; Bluetooth udio Monitoring; Pre-record function 10.0001095 MIR Premium License Key 7.350 dds the following features permanently to the MIR camera features: Framerates 100-200 fps, Recording formats ProRes 422 (HQ), 4444; 2K (2048 x 1152) recording; Log C; unlimited Look functions; Import Looks; Import custom 3D LUTs, SC CDL in-camera grading; Dynamic uto Tracking Whitebalance; Remote Control; Bluetooth udio Monitoring; Prerecord function 10.0001094 MIR dvanced to Premium License Key 4.400 dds the following features permanently to the MIR dvanced License camera features: 2K (2048 x 1152) recording; ProRes 4444, Import custom 3D LUTs 10.0001233 MIR dvanced License Temporary Week 220 dds the following features for the duration of one week to the MIR camera features: Framerates 100-200 fps; Recording format ProRes 422 (HQ); Log C; Unlimited Look functions; Import Looks; SC CDL in-camera grading; Dynamic uto Tracking Whitebalance; Remote Control; Bluetooth udio Monitoring; Pre-record function 10.0001235 MIR Premium License Temporary Week 490 dds the following features for the duration of one week to the MIR camera features: Framerates 100-200 fps, Recording formats ProRes 422 (HQ), 4444; 2K (2048 x 1152) recording; Log C; unlimited Look functions; Import Looks; Import custom 3D LUTs, SC CDL incamera grading; Dynamic uto Tracking Whitebalance; Remote Control; Bluetooth udio Monitoring; Pre-record function 10.0001234 MIR dvanced to Premium License Temporary Week 295 dds the following features for the duration of one week to the MIR dvanced License camera features: 2K (2048 x 1152) recording; ProRes 4444, Import custom 3D LUTs 10.0003723 MIR UHD License New 490 llows 4K UHD recording with all ProRes codecs up to ProRes 4444 in Ultra High Definition 3840 x 2160 resolution, and ProRes 3.2K recording in all ProRes codecs for cross-compatibility with LEX cameras running LEX SUP 11.0. Both modes at up to 60 fps. Includes 6G HD-SDI output (technology demo) and optional in-camera de-noising, sharpening and detailing tools. Requires installed SUP 2.0 Page 10

MIR and LEX Media, Cables and other ccessories MIR 006 Media, and LEX Cables and other ccessories MIR and LEX Media and Reader More LEX specific media, adapters and docks can be found in the section 'Media, Media dapters and Docks' further on. 010 MIR and LEX Media and Reader K2.0003623 CFast 2.0 Card 128 GB 499 new price Professional grade 128 GB high performance CFast 2.0 memory card. Compatible with MIR, LEX XT/XR with the CFast 2.0 dapter and LEX SXT/SXR with the CFast 2.0 dapter 2. llows in-camera recording of QuickTime ProRes (MIR and LEX XT/XR/SXT/SXR) or DNxHD (LEX XT/XR) files, including audio, metadata and timecode. K2.0001242 CFast 2.0 Card Reader 295 professional high quality and high reliability CFast 2.0 card reader that accepts a single CFast 2.0 memory card. Connects to a computer via USB-3. K2.0001243 USB Stick 19 n additional USB stick (each MIR camera includes one) for MIR. For importing MIR Look Files, camera set up files, frame line files, license keys. lso used for installing MIR Software Update Packets (SUPs). Not compatible with LEX. MIR and LEX Cables and other ccessories More accessories can be found in the respective sections of the LEX and MIR price lists and in the 'Pro Camera ccessories' price list. 011 MIR and LEX Cables and other ccessories K2.0001222 Viewfinder dapter VF-2 39 n adapter with an RRI viewfinder dovetail on one side and one 3/8" and one 1/4" mounting point on the other side. This adapter can be used to mount the MIR or LEX viewfinders to RRI Universal Mounting rms (UM) or Noga arms. K2.74000.0 Viewfinder Extension Bracket VEB-3 446 Sturdy telescoping bracket that positions the electronic viewfinder for LEX (EVF-1) or MIR (MVF-1) at the back of the camera (i.e. for use with geared heads). Includes swing-out arm to rest viewfinder on camera during set up changes. Requires medium (recommended) or long viewfinder cable. K2.0003898 Heated Eyecup HE-7 985 heated eyecup compatible with the MIR MVF-1 (starting with serial number 2151) and the LEX EVF-1 eyepiece. Designed to reduce fogging or freezing in very humid and/or cold environments. Not compatible with MIR MVF-1 (serial number 2150 or lower) or film camera eyepieces. K2.47771.0 1x Heated Eyecup Cable KC-42 K2.47840.0 HDTV BNC Cable (0.25m/10 inches, black) phase out 25 K2.47841.0 HDTV BNC Cable (0.25m/10 inches, blue) phase out 25 K2.47844.0 HDTV BNC Cable (10m/33ft, black) phase out 63 K2.47845.0 HDTV BNC Cable (10m/33ft, blue) phase out 63 K2.47838.0 HDTV BNC Cable (20m/66ft, black) phase out 102 K2.47839.0 HDTV BNC Cable (20m/66ft, blue) phase out 102 K2.70012.0 RRI Dynamic Range Test Chart DRTC-1 2.350 special test chart and analysis software for measurement of dynamic range and sensitivity of digital cameras. Through a unique stray light reduction concept this system is able to accurately measure up to 15.5 stops of dynamic range. Includes test chart, analysis software RRI quamat Universal DRTC, digital certificate of transparencies and instructions. Software is capable of analyzing JPG, DPX, CIN, TIFF and BMP image files. Note: Integrating sphere, precision spot photometer, PC and Microsoft Windows operating system required but not included. Page 11

LEX Camera and Viewfinder Sets LEX Camera and Viewfinder Sets 007 LEX Basic Camera Sets RRI LEX cameras offer exceptional image performance, are simple to operate and reliable in even the most extreme environments. Their efficient and versatile workflow options cover a wide range of applications and budget requirements. Their open and future proof architecture ensures a long usable life through hardware and software updates and compatibility with best-off-class third party technologies. For a complete list of features and detailed specifications see 'http://www.arri.com/camera/alexa'. 012 LEX Basic Camera Sets K0.71000.D LEX Classic EV Basic Camera Set 44.900 35 format film-style digital camera with an electronic viewfinder and a 16:9 active sensor area. Records QuickTime ProRes (4444, 422 HQ or 422) files onto in-camera SxS PRO or SxS PRO+ cards. MXF/DNxHD (444, 220x and 145) recording available with optional DNxHD license key. HD video or RRIRW T-link output via HD-SDI. Frame rate: 0.75 to 60 fps (0.75-120 fps available with optional High Speed license key). Exposure through electronic rolling shutter: 5.0-358.0. K1.71000.0 1x LEX Classic EV camera body K2.72018.0 1x SD Card K2.72008.0 1x Electronic Viewfinder EVF-1 K2.74001.0 1x Viewfinder Mounting Bracket VMB-3 K2.72012.0 1x Viewfinder Cable Short (0.35m/1.2ft) KC 150-S K2.72007.0 1x Center Camera Handle (CCH-1) K2.72002.0 1x Wedge dapter (W-1) Note 1: SxS PRO cards, SxS PRO+ cards, on-board battery adapters and software license keys are not included and can be ordered separately. Note 2: SxS PRO+ cards are supported with Software Update Packet 10 or later. K0.0007028 LEX SXT EV Basic Camera Set new 60.266 35 format film-style digital camera with an electronic viewfinder and four sensor modes: Open Gate, 4:3, 6:5 and 16:9. Includes built-in FSND filter holder and Lens Data System. Records RRIRW onto in-camera SXR Capture Drives or XR Capture Drives (from SXT/SXR SUP 1.1 on). Records QuickTime ProRes (4444 XQ, 4444, 422 HQ or 422, also from SUP 1.1 on) files in recording resolutions of HD, 2K Cine, 4K UHD or 4K Cine onto in-camera SXR Capture Drives, XR Capture Drives, SxS PRO cards (SxS dapter 2 required), SxS PRO+ cards (SxS dapter 2 required) or CFast 2.0 cards (CFast 2.0 dapter 2 required). Can process SC CDL and 3D LUTs. Three independent HD-SDI monitoring outputs. Exposure through electronic rolling shutter: 5.0-358.0. K1.0006178 1x LEX SXT EV camera body K2.0006339 1x SXR dapter K2.0006341 1x XR dapter K2.72018.0 1x SD Card K2.72008.0 1x Electronic Viewfinder EVF-1 K2.74001.0 1x Viewfinder Mounting Bracket VMB-3 K2.72012.0 1x Viewfinder Cable Short (0.35m/1.2ft) KC 150-S K2.72007.0 1x Center Camera Handle (CCH-1) K2.72002.0 1x Wedge dapter (W-1) Note: SXR Capture Drives, XR Capture Drives, SxS dapter 2, Cfast 2.0 dapter 2, docks, SxS PRO cards, SxS PRO+ cards, Cfast 2.0 cards and on-board battery adapters are not included and can be ordered separately. Page 12

LEX Camera and Viewfinder Sets K0.0007029 LEX SXT Plus Basic Camera Set new 66.076 35 format film-style digital camera with an electronic viewfinder and four sensor modes: Open Gate, 4:3, 6:5 and 16:9. Includes built-in FSND filter holder and Lens Data System. Records RRIRW onto in-camera SXR Capture Drives or XR Capture Drives (from SUP 1.1 on). Records QuickTime ProRes (4444 XQ, 4444, 422 HQ or 422, also from SUP 1.1 on) files in recording resolutions of HD, 2K Cine, 4K UHD or 4K Cine onto in-camera SXR Capture Drives, XR Capture Drives, SxS PRO cards (SxS dapter 2 required), SxS PRO+ cards (SxS dapter 2 required) or CFast 2.0 cards (CFast 2.0 dapter 2 required). Can process SC CDL and 3D LUTs. Three independent HD-SDI monitoring outputs. Exposure through electronic rolling shutter: 5.0-358.0. Built-in real-time wireless lens and camera control with the RRI Electronic Control System. One extra MON OUT and one extra RS socket, built-in 3D lens synchronization and motion sensors. K1.0006383 1x LEX SXT Plus camera body K2.0006339 1x SXR dapter K2.0006341 1x XR dapter K2.72018.0 1x SD Card K2.72008.0 1x Electronic Viewfinder EVF-1 K2.74001.0 1x Viewfinder Mounting Bracket VMB-3 K2.72012.0 1x Viewfinder Cable Short (0.35m/1.2ft) KC 150-S K2.72007.0 1x Center Camera Handle (CCH-1) K2.72002.0 1x Wedge dapter (W-1) Note: SXR Capture Drives, XR Capture Drives, SxS dapter 2, Cfast 2.0 dapter 2, docks, SxS PRO cards, SxS PRO+ cards, Cfast 2.0 cards and on-board battery adapters are not included and can be ordered separately. K0.0007027 LEX SXT Studio Basic Camera Set new 91.297 35 format film-style digital camera with an optical viewfinder and four sensor modes: Open Gate, 4:3, 6:5 and 16:9. Includes a rotating mirror shutter, internal motorized ND1.3/optical clear filter slider and built-in Lens Data System. Records RRIRW onto in-camera SXR Capture Drives or XR Capture Drives (from SUP 1.1 on). Records QuickTime ProRes (4444 XQ, 4444, 422 HQ or 422, also from SUP 1.1 on) files in recording resolutions of HD, 2K Cine, 4K UHD or 4K Cine onto in-camera SXR Capture Drives, XR Capture Drives, SxS PRO cards (SxS dapter 2 required), SxS PRO+ cards (SxS dapter 2 required) or CFast 2.0 cards (CFast 2.0 dapter 2 required). Can process SC CDL and 3D LUTs. Three independent HD-SDI monitoring outputs. Exposure through physical mirror shutter (11.2-180.0 ) or electronic rolling shutter (5.0-358.0 ). Built-in real-time wireless lens and camera control with the RRI Electronic Control System. One extra MON OUT and one extra RS socket, built-in 3D lens synchronization and motion sensors. K1.0006987 1x LEX SXT Studio camera body K2.0006339 1x SXR dapter K2.0006341 1x XR dapter K2.72018.0 1x SD Card K2.72048.0 1x Optical Universal Viewfinder OVF-1 K2.47081.0 1x 4358x Eyepiece K2.72007.0 1x Center Camera Handle (CCH-1) Note: SXR Capture Drives, XR Capture Drives, SxS dapter 2, Cfast 2.0 dapter 2, docks, SxS PRO cards, SxS PRO+ cards, CFast 2.0 cards and on-board battery adapters are not included and can be ordered separately. Page 13

LEX Camera and Viewfinder Sets LEX Pro Camera Sets LEX Pro Camera Sets contain an LEX camera, sufficient media and a number of must-have accessories to get you up and shooting quickly. 013 LEX Pro Camera Sets KB.71512.D LEX Classic EV Pro Camera Set 51.067 K0.71000.D 1x LEX Classic EV Basic Camera Set K0.0003277 1x SxS PRO+ Card Set 5x 128 GB K0.71030.0 1x LEX Bundle ccessory Set (EV/Plus) Note 1: an on-board battery adapter is not included and should be ordered separately. Note 2: SxS PRO+ cards are supported with Software Update Packet 10 Open Beta 2 or later. KB.72001.D LEX SXT EV Pro Camera Set new 77.356 K0.0007028 1x LEX SXT EV Basic Camera Set K0.0006946 1x SXR Capture Drive Set 4x 1 TB K2.72139.0 1x FSND Filter Set (Full) K0.71030.0 1x LEX Bundle ccessory Set (EV/Plus) Note 1: Docks or on-board battery adapters are not included and can be ordered separately. Note 2: For use with the FSND filters, the included FSND shim has to be installed to assure proper flange focal depth. KB.72002.D LEX SXT Plus Pro Camera Set new 82.991 K0.0007029 1x LEX SXT Plus Basic Camera Set K0.0006946 1x SXR Capture Drive Set 4x 1 TB K2.72139.0 1x FSND Filter Set (Full) K0.71030.0 1x LEX Bundle ccessory Set (EV/Plus) Note 1: Docks or on-board battery adapters are not included and can be ordered separately. Note 2: For use with the FSND filters, the included FSND shim has to be installed to assure proper flange focal depth. KB.72003.D LEX SXT Studio Pro Camera Set new 104.324 K0.0007027 1x LEX SXT Studio Basic Camera Set K0.0006946 1x SXR Capture Drive Set 4x 1 TB K0.71034.0 1x LEX Bundle ccessory Set (Studio) Note: Docks or on-board battery adapters are not included and can be ordered separately. K0.71030.0 LEX Bundle ccessory Set (EV/Plus) 1.417 K2.72021.0 1x LEX Ethernet/RJ-45 Cable (3.00m/9.8ft) KC 153-S K2.72013.0 1x Viewfinder Cable Medium (0.65m/2.1ft) KC 151-S K2.72083.0 1x Shoulder Pad (SP-4) K2.72031.0 1x LEX 12V ccessory Cable KC 154-SP-S K2.72015.0 1x Handle Extension Block (HEB-2) K2.72017.0 1x Leveling Block (LB-1) K2.74000.0 1x Viewfinder Extension Bracket VEB-3 K2.66172.0 1x Bridge Plate dapter BP-2 K0.71034.0 LEX Bundle ccessory Set (Studio) 613 K2.72017.0 1x Leveling Block (LB-1) K2.72083.0 1x Shoulder Pad (SP-4) K2.72015.0 1x Handle Extension Block (HEB-2) K2.72031.0 1x LEX 12V ccessory Cable KC 154-SP-S K2.72021.0 1x LEX Ethernet/RJ-45 Cable (3.00m/9.8ft) KC 153-S Page 14

LEX Camera and Viewfinder Sets LEX Viewfinder Sets 014 LEX Viewfinder Sets K0.71220.0 EVF Set for LEX Studio 7.606 ll you need to use the LEX Electronic Viewfinder EVF-1 on the LEX Classic Studio, LEX Classic Studio with XR Module upgrade, LEX XT Studio, LEX SXR Studio or LEX SXT Studio. K2.72008.0 1x Electronic Viewfinder EVF-1 K2.74001.0 1x Viewfinder Mounting Bracket VMB-3 K2.72063.0 1x Electronic Viewfinder dapter EV-1 K2.72012.0 1x Viewfinder Cable Short (0.35m/1.2ft) KC 150-S K0.71320.0 Electronic Viewfinder Set for LEX M/LEX XT M 7.079 ll you need to use the LEX Electronic Viewfinder EVF-1 on the LEX M or LEX XT M. K2.72008.0 1x Electronic Viewfinder EVF-1 K2.74001.0 1x Viewfinder Mounting Bracket VMB-3 K2.72013.0 1x Viewfinder Cable Medium (0.65m/2.1ft) KC 151-S Page 15

LEX Upgrades and License Keys 008 LEX Upgrades and License Keys To protect our customer's investment, LEX cameras offer a number of attractive upgrades that keep them up-to-date in regards to current production methods. side from the free-of-charge Software Update Packets (SUPs) and paid licenses, there are a number of hardware upgrades in this section. 015 LEX Upgrades K4.0006507 SXR Module Upgrade Set EV new tba. n upgrade for LEX XT (EV) cameras that replaces internal electronics boards and the XR module on the camera left side. The new electronics allow in-camera recording of ProRes 4K (from SXT/SXR SUP 1.1 on), improved image quality, SC CDL, 3D LUTs and three independent HD-SDI outputs. The new SXR Module allows recording of RRIRW or ProRes (from SXT/SXR SUP 1.1 on) onto SXR Capture Drives or XR Capture Drives (from SXT/SXR SUP 1.1 on). It also allows recording of ProRes onto Cfast 2.0 cards, SxS PRO+ cards or SxS PRO cards (from SXT/SXR SUP 1.1 on). Please note that each medium needs ist own adapter. - COM3, PIC2 and LOG2 boards - SXR Module (new left side cover with media slot and 'LEX SXR' label) - SXR Cover (new right side cover with 'LEX SXR EV 'label) - Upgrade labor Note 1: SXR Capture Drives, XR Capture Drives, SxS dapter 2, SxS PRO cards, SxS PRO+ cards, CFast 2.0 dapter 2, CFast 2.0 cards, docks or the XR Module Top Cover Set are not included and can be ordered separately. Note 2: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. K4.0006950 SXR Module Upgrade Set Plus new tba. n upgrade for LEX XT Plus cameras that replaces internal electronics boards and the XR module on the camera left side. The new electronics allow in-camera recording of ProRes 4K (from SXT/SXR SUP 1.1 on), improved image quality, SC CDL, 3D LUTs and three independent HD-SDI outputs. The new SXR Module allows recording of RRIRW or ProRes (from SXT/SXR SUP 1.1 on) onto SXR Capture Drives or XR Capture Drives (from SXT/SXR SUP 1.1 on). It also allows recording of ProRes onto Cfast 2.0 cards, SxS PRO+ cards or SxS PRO cards (from SXT/SXR SUP 1.1 on). Please note that each medium needs ist own adapter. - COM3, PIC2 and LOG2 boards - SXR Module (new left side cover with media slot and 'LEX SXR' label) - SXR Cover (new right side cover with 'LEX SXR Plus' label) - Upgrade labor Note 1: SXR Capture Drives, XR Capture Drives, SxS dapter 2, SxS PRO cards, SxS PRO+ cards, CFast 2.0 dapter 2, Cfast 2.0 cards, docks or the XR Module Top Cover Set are not included and can be ordered separately. Note 2: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. K4.0006965 SXR Module Upgrade Set Studio new tba. n upgrade for LEX XT Studio cameras that replaces internal electronics boards and the XR module on the camera left side. The new electronics allow in-camera recording of ProRes 4K (from SXT/SXR SUP 1.1 on), improved image quality, SC CDL, 3D LUTs and three independent HD-SDI outputs. The new SXR Module allows recording of RRIRW or ProRes (from SXT/SXR SUP 1.1 on) onto SXR Capture Drives or XR Capture Drives (from SXT/SXR SUP 1.1 on). It also allows recording of ProRes onto Cfast 2.0 cards, SxS PRO+ cards or SxS PRO cards (from SXT/SXR SUP 1.1 on). Please note that each medium needs ist own adapter. - COM3, PIC2 and LOG2 boards - SXR Module (new left side cover with media slot and 'LEX SXR' label) - SXR Cover (new right side cover with 'LEX SXR Studio' label) - Upgrade labor Note 1: SXR Capture Drives, XR Capture Drives, SxS dapter 2, SxS PRO cards, SxS PRO+ cards, CFast 2.0 dapter 2, Cfast 2.0 cards, docks or the XR Module Top Cover Set are not included and can be ordered separately. Note 2: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. Page 16

LEX Upgrades and License Keys K4.72574.0 XR Module Upgrade Set 9.850 n upgrade for LEX Classic cameras (LEX, LEX Plus, LEX Plus 4:3, LEX M and LEX Studio) that replaces the SxS module on the camera left side. The XR Module allows incamera RRIRW (up to 16:9120 fps or 4:3 Cropped 96 fps), ProRes (up to ProRes 4444 16:9/HD 120 fps or 4:3/2K 48 fps) or DNxHD (up to DNxHD 44416:9/HD 96 fps) recording onto XR Capture Drives. With the SxS dapter it is possible to record ProRes or DNxHD onto SxS PRO or SxS PRO+ cards. With the Cfast 2.0 dapter it is possible to record ProRes or DNxHD onto Cfast 2.0 cards. - COM2 board (new compression electronics board) - XR Module (new side cover with media slot) - Upgrade labor Note 1: XR Capture Drives, SxS dapter, SxS PRO cards, SxS PRO+ cards, CFast 2.0 dapter, CFast 2.0 cards, docks or the XR Module Top Cover Set are not included and can be ordered separately. Note 2: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. K2.72128.0 XR/SXR Module Top Cover Set 67 set of 6 covers for the XR or SXR Module body and door in red, green, blue, yellow, black and white with spare attachment screws. These covers prevent scratches to the XR or SXR Module from the Viewfinder Extension Bracket. The different colors allow for easy identification of camera, B camera, C camera and so on. K2.72140.0 Internal Filter Module (IFM-1) Set 1.485 n upgrade for LEX, LEX Plus, LEX Plus 4:3 and LEX M that replaces the reflex prevention cone inside the lens cavity with a filter holder that allows the manual insertion of an FSND (Full Spectrum Neutral Density) filter. Placing a filter between lens and sensor reduces weight, reflections and complexity. K2.72144.0 1x IFM/Extenders Depth Gauge DG-1 K2.72137.0 1x FSND Filter Set (Basic) Note: This upgrade can be performed by any LEX customer. The basic filter set includes FSND 0.6, 1.2 and 1.8 filters and an optical clear. The remaining five FSND filters can be purchased in the completion filter set. Not compatible with all generations of LEX Studio. K2.47893.0 LEX XT Fan Set 507 n upgrade for LEX Classic cameras (LEX, LEX Plus, LEX Plus 4:3, LEX M and LEX Studio) that replaces the fan in the ventilation shaft with an even more silent fan. K4.74112.0 - LEX XT fan K4.74004.0 - LEX XT ventilation grille - Upgrade instructions Note: This upgrade can be performed by any LEX customer. K2.72027.0 LEX Plus Upgrade 9.700 n upgrade from LEX to LEX Plus or LEX HD to LEX HD Plus. Includes the Plus right side electronics cover and an LDS PL mount. Note: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. K2.72142.0 LEX XT Plus Upgrade 9.700 n upgrade from LEX XT to LEX XT Plus Includes the Plus right side electronics cover and an LDS PL mount. Note: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. K4.0007037 LEX SXT Plus Upgrade new 9.700 n upgrade from LEX SXT to LEX SXT Plus. Includes the Plus right side electronics cover. Note: Upgrade can be performed by any RRI Digital Camera Service Center. Please call RRI service to schedule an update appointment. Page 17

LEX Upgrades and License Keys LEX License Keys License keys can be purchased from the LEX License Shop at http://alshop.arri.de. Each license key is coded to a single camera's serial number. Once purchased, licenses can be installed and removed from that camera at will. 016 LEX License Keys K2.72076.0 LEX High Speed License Key 1.350 High Speed mode allows recording 60 to 120 fps in 16:9 and 60 to 90 fps in 4:3 (if 4:3 is supported by the camera model). High Speed mode uses the same Super 35 sensor area as Regular Speed mode (same depth of field, same angle of view). Requirements: LEX camera with Software Update Packet 5.0 or higher. lways included in LEX M, LEX Plus 4:3, LEX Studio and all LEX XT, SXT and SXR cameras. K2.72067.0 LEX namorphic De-squeeze License Key 590 namorphic de-squeeze shows a properly de-squeezed image (with or without surround view) on the EVF-1 and/or MON OUT when working with 2x or 1.3x anamorphic lenses. Requirements: any LEX with SUP 4.0 or higher or LEX HD or LEX HD Plus with SUP 7.1. lways included in LEX M, LEX Plus 4:3, LEX Studio and all LEX XT, SXT and SXR cameras. K2.72094.0 LEX DNxHD License Key 3.890 The DNxHD license allows in-camera recording onto XR Capture Drives, SxS PRO, SxS PRO+ or CFast 2.0 cards of 16:9 vid DNxHD 145 (8 bit 4:2:2), DNxHD 220x (10 bit 4:2:2) or DNxHD 444 (10 bit 444) codecs, all with an MXF wrapper and embedded audio, timecode and metadata. LEX MXF DNxHD files are stored using operational pattern OP1a, frame wrapped, per SMPTE 2019-4-2008. RRI provides a free LEX M plug-in for Windows or Mac OS X for use in vid Media Composer 5.5 and later. Requirements: Software Update Packet 6.0 or higher for LEX and LEX Plus. SUP 6.1 or higher for LEX Plus 4:3, LEX Studio and LEX M. SUP 8.0 or higher for LEX XT or LEX XT M. lways included in LEX Plus 4:3, LEX Studio, LEX XT Plus and LEX XT Studio. Not compatible with LEX SXT and SXR cameras. Page 18

LEX Media, Media dapters and Docks 009 SXR Media, Media, dapters Media and dapters Docks and Docks C Fast 2.0 cards and readers can be found in the section 'MIR and LEX'. 017 SXR Media, dapters and Docks K2.0006942 SXR Capture Drive 1 TB 4.250 new Small size, high performance, high reliability industrial grade solid state drive technology in a rugged aluminum enclosure. Compatible with LEX SXT/SXR cameras. Requires SXR dapter. llows in-camera recording of RRIRW or ProRes (from SXT/SXR SUP 1.1 on) as well as audio, metadata and timecode. K0.0006946 SXR Capture Drive Set 4x 1 TB new 15.640 set of four SXR Capture Drives 1 TB K2.0006157 SXR Capture Drive 2 TB new 5.500 Small size, high performance, high reliability industrial grade solid state drive technology in a rugged aluminum enclosure. Compatible with LEX SXT/SXR cameras. Requires SXR dapter. llows in-camera recording of RRIRW or ProRes (from SXT/SXR SUP 1.1 on) as well as audio, metadata and timecode. K0.0006254 SXR Capture Drive Set 3x 2 TB new 15.180 set of three SXR Capture Drives 2 TB K2.0006159 SXR Capture Drive Dock (Thunderbolt 2) new tba. dock for a single SXR Capture Drive (1 or 2 TB). Provides drive access and management over a Thunderbolt 2 connection. K2.0006339 SXR dapter new 395 n adapter that fits into LEX SXT and SXR cameras for holding one SXR Capture Drive for incamera recording of RRIRW or ProRes. Note 1: The SXR dapter is not compatible with LEX XT/XR cameras. Note 2: The SXR dapter is not compatible with XR Capture Drives Page 19

LEX Media, Media dapters and Docks XR Media, dapters and Docks 018 XR Media, dapters and Docks K2.48837.0 XR Capture Drive 512 GB 2.950 Small size, high performance, high reliability industrial grade solid state drive technology in a rugged aluminum enclosure. Compatible with LEX Classic cameras with the XR Module upgrade, LEX XT cameras, LEX SXT/SXR cameras (from SUP 1.1 on, requires XR dapter), Codex Onboard S Recorder, Capture Drive Docks and Codex Vault S. llows in-camera recording of RRIRW, ProRes or DNxHD as well as audio, metadata and timecode. K0.71040.0 XR Capture Drive Set 4x 512 GB 10.900 set of four XR Capture Drives K2.48840.0 Capture Drive Dock (USB-3 no VFS license) 1.500 dock for a single XR Capture Drive, Codex Capture Drive for Onboard S or Codex Transfer Drive. Provides drive access over a USB-3 connection. Codex Virtual File System Encoder not included. RRIRW footage is only provided as.ari files with no transcoding option (Footage recorded as ProRes or DNxHD clips can be accessed without VFS); Codex VFS Encoder, Codex Metadata Tools and Codex Disk and Tape Offloader options are available as optional license through Codex support. Requires pple Mac hardware with Mac OS X 10.6.2 or later (see codexdigital.com for details). USB-3 cable and power supply included. K2.0003429 Capture Drive Dock (USB-3) 3.500 dock for a single XR Capture Drive, Codex Capture Drive for Onboard S or Codex Transfer Drive. Provides drive access and management over a USB-3 connection. Includes the Codex VFS Encoder, the Codex Metadata Tools and the Codex Disk and Tape Offloader option. Requires pple Mac hardware with Mac OS X 10.6.2 or later (see codexdigital.com for details). USB-3 cable and power supply included. K2.0003426 Capture Drive Dock (Thunderbolt) 3.500 dock for a single XR Capture Drive, Codex Capture Drive for Onboard S or Codex Transfer Drive. Provides drive access and management over a Thunderbolt connection. Includes the Codex VFS Encoder, the Codex Metadata Tools and the Codex Disk and Tape Offloader option. Requires pple Mac hardware with a Thunderbolt interface and Mac OS X 10.6.2 or later (see codexdigital.com for details). Thunderbolt cable and power supply included. K2.48841.0 Capture Drive Dock (SS) 7.500 dock that accepts two XR Capture Drives, Codex Capture Drives for Onboard S or Codex Transfer Drives. Provides drive access and management over a SS connection and can be osed to clone the drive contents to another drive in the Codex format. Includes the Codex VFS Encoder, the Codex Metadata Tools, the Codex Disk and Tape Offloader and the Codex Storage option. Requires pple Mac hardware with a SS interface card or a Thunderbolt/SS adapter, USB-2 for control, and Mac OS X 10.6.2 or later (see codexdigital.com for details). Power supply included. K2.0006341 XR dapter new 395 n adapter that fits into LEX SXT and SXR cameras for holding one XR Capture Drive for incamera recording of RRIRW or ProRes (from SUP 1.1 on). Note 1: The XR dapter is not compatible with LEX XT/XR cameras. Note 2: The XR dapter is not compatible with SXR Capture Drives Page 20

LEX Media, Media dapters and Docks CFast 2.0 Media, dapters and Docks 019 CFast 2.0 Media, dapters and Docks K0.0000960 CFast 2.0 dapter and Card Set 3.264 n adapter that fits into LEX Classic cameras with the XR Module upgrade and LEX XT cameras for holding one CFast 2.0 card for in-camera recording of ProRes or DNxHD. K2.0003623 5x CFast 2.0 Card 128 GB K2.48839.0 1x CFast 2.0 dapter Note 1: The Cfast 2.0 dapter is not compatible with LEX SXT/SXR cameras. Note 2: LEX cameras are not compatible with Compact Flash or Cfast 1.0 cards. K2.48839.0 CFast 2.0 dapter 769 n adapter that fits into LEX Classic cameras with the XR Module upgrade and LEX XT cameras for holding one CFast 2.0 card for in-camera recording of ProRes or DNxHD. Note 1: The CFast 2.0 dapter is not compatible with LEX SXT/SXR cameras. Note 2: LEX cameras are not compatible with Compact Flash or Cfast 1.0 cards. K0.0007009 CFast 2.0 dapter 2 and Card Set new 3.264 n adapter that fits into LEX SXT and SXR cameras for holding one CFast 2.0 card for incamera recording of ProRes (from SUP 1.1 on). K2.0006337 1x CFast 2.0 dapter 2 K2.0003623 5x CFast 2.0 Card 128 GB Note 1: The CFast 2.0 dapter 2 is not compatible with LEX XT/XR cameras. Note 2: LEX cameras are not compatible with Compact Flash or Cfast 1.0 cards. K2.0006337 CFast 2.0 dapter 2 new 769 n adapter that fits into LEX SXT and SXR cameras for holding one CFast 2.0 card for incamera recording of ProRes (from SXT/SXR SUP 1.1 on). Note 1: The CFast 2.0 dapter 2 is not compatible with LEX XT/XR cameras. Note 2: LEX cameras are not compatible with Compact Flash or Cfast 1.0 cards. SxS Media, dapters and Docks 020 SxS Media, dapters and Docks K2.0003106 SxS PRO+ Card 1x 128 GB 1.145 Small size, high performance, high reliability professional grade memory card. Compatible with LEX Classic cameras, LEX Classic cameras with the XR Module upgrade (with SxS dapter), LEX XT cameras (with SxS dapter) and LEX SXT/SXR cameras (with SxS dapter 2, from SUP 1.1 on). LEX Classic cameras with the XR Module upgrade and LEX XT cameras require Software Update Packet 10 Open Beta 2 or later. For in-camera recording of ProRes or DNxHD as well as audio, metadata and timecode. Please note that LEX cameras are not compatible with SxS-1 cards. K0.0003277 SxS PRO+ Card Set 5x 128 GB 4.750 K2.0003106 5x SxS PRO+ Card 1x 128 GB K2.48838.0 SxS dapter 769 n adapter that fits into LEX Classic cameras with the XR Module upgrade and LEX XT cameras for holding one SxS PRO or SxS PRO+ card for in-camera recording of ProRes or DNxHD. Note 1: The SxS dapter is not compatible with LEX SXT/SXR cameras. Note 2: LEX cameras are not compatible with SxS-1 cards. K2.0006338 SxS dapter 2 new 769 n adapter that fits into LEX SXT and SXR cameras for holding one SxS PRO or SxS PRO+ card for in-camera recording of ProRes (from SXT/SXR SUP 1.1 on). Note 1: The SxS dapter 2 is not compatible with LEX XT/XR cameras. Note 2: LEX cameras are not compatible with SxS-1 cards. Page 21

LEX Media, Media dapters and Docks SD Media 021 SD Media K2.72018.0 SD Card 11 For importing RRI Look Files, camera set up files, frame line files, feature license keys and custom lens tables for the Lens Data rchive (LD). Stores captured stills from the REC OUT image path in RRIRW (.ari, 12 bit, only on LEX Classic cameras), TIFF (.tif, 16 bit), DPX (.dpx, 10 bit) and JPEG (.jpg, 8 bit) format as well as logging files. lso used for installing Software Update Packets (SUPs). Page 22

Price List LEX Filters 05/2015 010 LEX Filters FSND Filters LEX FSND (Full-spectrum Neutral Density) filters are high quality filters that maintain a neutral color balance at all densities. Filtering behind the lens rather than in front saves time and reduces weight, reflections and complexity while also decreasing narcissism. FSND filters can be used in the Internal Filter Module (IFM-1) of the LEX XT cameras, LEX SXT cameras, LEX SXR cameras or any classic LEX camera with an IFM upgrade. FSND filters are not compatible with all generations of LEX Studio cameras. Please note that when the filters are used, the supplied shim has to be also used to change the camera's flange focal depth accordingly. Note: The upgrade set for LEX Classic cameras (Internal Filter Module (IFM-1) Set, K2.72140.0) can be found in the 'LEX Upgrades' section. 022 LEX FSND Filters K2.72137.0 FSND Filter Set (Basic) 1.150 The basic filter set includes the IFM Optical Clear, FSND filters 0.6, 1.2 and 1.8, the IFM Shim, the filter insertion tool (the Ground Glass/Frameglow tool K4.52722.0), the IFM/Extenders Depth Gauge DG-1 and a case with space for 8 FSND filters. K2.72138.0 FSND Filter Set (Completion) 1.350 The completion filter set includes FSND 0.3, 0.9, 1.5, 2.1 and 2.4 filters. K2.72139.0 FSND Filter Set (Full) 2.425 The full filter set includes the IFM Optical Clear, FSND filters 0.3, 0.6, 0.9, 1.2, 1.5, 1.8, 2.1 and 2.4, the IFM Shim, the filter insertion tool (the Ground Glass/Frameglow tool K4.52722.0), the IFM/Extenders Depth Gauge DG-1 and a case with space for all that stuff. K4.73069.0 FSND 0.3 285 K4.73070.0 FSND 0.6 285 K4.73071.0 FSND 0.9 285 K4.73072.0 FSND 1.2 285 K4.73073.0 FSND 1.5 285 K4.73074.0 FSND 1.8 285 K4.73075.0 FSND 2.1 285 K4.73076.0 FSND 2.4 285 K4.73062.0 IFM Optical Clear 215 n IFM filter frame with an optical clear, to be used when no ND attenuation is desired (shim must be present). K2.72141.0 IFM Empty Filter Frame 115 n empty IFM filter frame for the creation of one custom IFM-1 filter for specialty applications. Includes protective plastic case and instructions. K2.72143.0 IFM Shim 12 This shim must be used in addition to any existing shims between lens mount and camera when using any of the FSND filters or the IFM Optical Clear. lready included in the Basic and Full Filters Sets. K2.72144.0 IFM/Extenders Depth Gauge DG-1 30 depth gauge for making sure that a lens will not touch the IFM-1/FSND filters when inserted into the camera. The same gauge can also be used to check if lenses are compatible with the lura Extenders 1.4x and 2x. Page 23

Price List LEX Viewfinders 05/2015 011 LEX Viewfinders Electronic Viewfinder and ccessories The LEX Electronic Viewfinder EVF-1 is a high resolution, film-style low latency full color electronic viewfinder for the LEX Classic, LEX Classic with XR Module upgrade, LEX XT, LEX SXT and LEX SXR family of cameras. The high end coated glass optics of the EVF-1 offer high contrast, low distortion and an evenly illuminated viewing area. Surround view shows an area larger than that being recorded. Note 1: Viewfinder and heated eyecup cables can be found in the 'LEX Cables' section of this price list. Note 2: The Viewfinder Extension Bracket VEB-3 (K2.74000.0) and the Viewfinder dapter VF-1 (K2.72125.0) can be found in the 'MIR and LEX' section of this price list. 023 LEX Electronic Viewfinder and ccessories K2.72008.0 Electronic Viewfinder EVF-1 6.048 Low latency ( 1 frame delay) electronic color viewfinder with 1280 x 784 F-LCOS micro display (image: 1280 x 720, status bars: 1280 x 32 above and 1280 x 32 below image) and RRI LED illumination, both temperature controlled. Image can be flipped for use of viewfinder on camera left or right. Displays camera or EVF menus, customizable frame lines, surround view, camera status, Lens Data System info and clip/reel numbers. Control of the basic viewfinder and camera settings through on-screen menu. Compatible with LEX Classic cameras, LEX Classic cameras with the XR Module upgrade, LEX XT cameras and LEX SXT/SXR cameras. LEX Studio, XT Studio and SXT/SXR Studio require the Electronic Viewfinder dapter EV-1 (K2.72063.0). Note: Not compatible with LEX Mini K2.74001.0 Viewfinder Mounting Bracket VMB-3 753 Sturdy telescoping bracket that attaches an electronic viewfinder to LEX cameras. Compatible with LEX Classic cameras, LEX Classic cameras with the XR Module upgrade, LEX XT cameras, LEX SXT/SXR cameras and LEX Mini. Electronic Viewfinder dapter EV-1 additionally required for LEX Studio, XT Studio and SXT/SXR Studio. Uses standard 15 mm lightweight rods (at the proper distance from each other and from the optical center) for forward/backwards movement. llows additional movement of viewfinder left/right, up/down, 360 degree rotation and placement on camera left or right side. Built-in bubble level. Provides one 3/8-16 UNC mounting point. K2.72063.0 Electronic Viewfinder dapter EV-1 538 mechanical cover for the LEX Studio, XT Studio or SXT/SXR Studio viewfinder interface that includes mounting points for the LEX Viewfinder Mounting Bracket VMB-1, VMB-2 or VMB-3 and an EVF connector for an LEX viewfinder cable. Page 24

Price List LEX Viewfinders 05/2015 LEX Optical Viewfinders and ccessories Optical viewfinders have zero delay and show a bright and sharp full color image through the taking lens. They show natural motion portrayal, provide accurate color fidelity and proper white balance. Optical viewfinders are easier to watch for extended periods of time, allow easier judging of focus and lighting through the viewfinder. They function even when the camera is powered off, allowing faster choosing of lenses, staging, setting up shots, pre-lighting or rehearsing. Note: eyepiece levelers for optical viewfinders can be found in the 'Pro Camera ccessories' price list. 024 LEX Optical Viewfinders and ccessories K2.72048.0 Optical Universal Viewfinder OVF-1 13.305 Bright, high contrast optical viewfinder OVF-1 for LEX Studio, XT Studio and SXT/SXR Studio for through-the-lens viewing with low distortion, accurate color fidelity and no delay. Rotates to left and right of camera body and telescopes closer/farther from camera body. utomatically keeps an upright image with an optional manual image rotation. Includes a flip in ND 0.6 contrast filter and de-squeeze optics for 2x anamorphic lenses (1.3x de-squeeze module also available). Includes Basic Insert Module BIM-1 (K4.72319.0) for RGB frameglow. Includes camera port cover. Compatible with 8x and 10x 435 eyepieces, 435 eyepiece extensions and all RRIFLEX and RRICM heated eyecups. With the optional RRICM Eyepiece dapter E-1 (K2.72049.0), the OVF-1 can accept the 8x RRICM Studio eyepiece or RRICM Studio Viewfinder Extension Medium. Not compatible with RRICM Studio namorphic Extension, RRICM Studio Viewfinder Zoom Extension and Lite Universal Eyepiece (K4.52734.0). Eyepiece not included. LEX Studio ground glass and frameglow holder are compatible to the RRICM system, but only LEX Studio ground glasses and glow masks provide exact alignment of framelines and captured frame. Custom formats (except for Open Gate sensor mode) are available for order through the online ground glass composer. The OVF-1 can be replaced with the LEX Electronic Viewfinder EVF-1 by using the Electronic Viewfinder Set for LEX Studio/LEX XT Studio (K0.71220.0). K2.47081.0 435 8x Eyepiece 2.911 8x magnification wide angle eyepiece compatible with LEX Studio, XT Studio, SXT/SXR Studio, all RRIFLEX 435 models and the RRIFLEX 535B. K2.41822.0 435 10x Eyepiece 2.747 10x magnification super wide angle eyepiece compatible with LEX Studio, XT Studio, SXT/SXR Studio, all RRIFLEX 435 models and the RRIFLEX 535B. K4.72319.0 Basic Insert Module BIM-1 2.711 module that attaches to the Optical Universal Viewfinder OVF-1 and accepts RRICM style frameglow masks. Frameglow can be set to any color. K4.72364.0 LEX Studio Viewfinder Port Cover 108 cover to protect the LEX Studio, LEX XT Studio or LEX SXT/SXR Studio viewfinder port when neither the Optical Universal Viewfinder OVF-1 (K2.72048.0) nor the Electronic Viewfinder dapter EV-1 (K2.72063.0) are attached. K2.72080.0 1.3x De-squeeze Module 2.962 Replaces the 2x De-squeeze Module in the OVF-1 with a 1.3x squeeze ratio. K2.47304.0 435 Viewfinder Extension Medium FE-5 3.639 200 mm viewfinder extension compatible with LEX Studio, LEX XT Studio, LEX SXT/SXR Studio, all RRIFLEX 435 models and the RRIFLEX 535B. K2.47082.0 435 Viewfinder Extension Long FE-3 4.479 295 mm viewfinder extension compatible with LEX Studio, LEX XT Studio, LEX SXT/SXR Studio, all RRIFLEX 435 models and the RRIFLEX 535B. K2.72049.0 RRICM Eyepiece dapter E-1 510 With this adapter the Optical Viewfinder OVF-1 can accept the RRICM Studio Eyepiece (K2.54003.0) or RRICM Studio Viewfinder Extension Medium (K2.54005.0). Page 25

Price List LEX Viewfinders 05/2015 K2.54003.0 RRICM Studio Eyepiece 2.829 8x Eyepiece compatible with OVF-1 (with RRICM Eyepiece dapter E-1), RRICM Studio Viewfinder and RRICM Studio Universal Viewfinder. Includes eyecup. Includes eyecup. K2.54005.0 RRICM Studio Viewfinder Extension Medium 3.598 150 mm viewfinder extension compatible with OVF-1 (with RRICM Eyepiece dapter E- 1), RRICM Studio Viewfinder, RRICM Studio Universal Viewfinder, RRICM Lite Viewfinder 2 and RRICM Lite Universal Viewfinder. K2.47794.0 Heated Eyecup HE-4 902 robust heated eyecup with 2 power settings that fits all RRICM, RRIFLEX and LEX Studio eyepieces. Not compatible with LEX Electronic Viewfinder EVF-1 or MIR Viewfinder MVF-1 eyepieces. Cable has to be ordered separately. For LEX Studio, LEX XT Studio, LEX SXT/SXR Studio, RRIFLEX 235 and all RRIFLEX 435 models use cable KC-42 (K2.47771.0). For RRIFLEX 16SR 3 and RRIFLEX 535 use cable KC-27-SP-S (K2.47770.0). For RRICM Lite, RRICM Studio and all RRIFLEX 416 models use cable KC-63 (K4.54460.0). K2.47769.0 Heated Eyecup HE-5 1.343 robust heated eyecup with 2 power settings and an automatically closing element that fits all RRICM, RRIFLEX and LEX Studio eyepieces. Not compatible with LEX Electronic Viewfinder EVF-1 or MIR Viewfinder MVF-1 eyepieces. Cable has to be ordered separately. For LEX Studio, LEX XT Studio, LEX SXT/SXR Studio, RRIFLEX 235 and all RRIFLEX 435 models use cable KC-42 (K2.47771.0). For RRIFLEX 16SR 3 and RRIFLEX 535 use cable KC-27-SP-S (K2.47770.0). For RRICM Lite, RRICM Studio and all RRIFLEX 416 models use cable KC-63 (K4.54460.0). Page 26

Price List LEX Viewfinders 05/2015 LEX Studio Ground Glasses and Frameglow Masks The physical frames of LEX Classic Studio, LEX Classic Studio with XR Module upgrade, LEX XT Studio, LEX SXT Studio or LEX SXR Studio ground glasses and frameglow masks are the same as those used in RRICM film cameras. However, the actual frameline dimensions are different, so for a precise alignment of framelines and captured pixels only the ground glasses and frameglow masks listed here should be used. Since the 1.85:1 markings are very close to the 1.78:1 markings, we have omitted the 1.85:1 marking from all ground glasses and frameglow masks. For frameline markings beyond the options here, please use the online ground glass composer at http://www.arri.com/camera/ground_glass_composer.html. Note: The ground glass grit defines how bright a ground glass is and how easy it is to focus. 800 grit is the standard used in LEX Classic Studio, LEX Classic Studio with XR Module upgrade, LEX XT Studio, LEX SXT Studio, LEX SXR Studio and film cameras. This is what we recommend. 1200 grit ground glasses (marked with "1200" on the ground glass) are brighter, but the finer a ground glass grit is, the more difficult it is to judge focus. 025 LEX Studio Ground Glasses and Frameglow Masks K2.72069.0 Ground Glass 4:3, Spherical, 800 538 Ground glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 800 grit surface. K2.72090.0 Ground Glass 4:3, Spherical, 1200 538 Ground glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface. K2.72088.0 Ground Glass 16:9, Spherical, 800 538 Ground glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 800 grit surface. K2.72089.0 Ground Glass 16:9, Spherical, 1200 538 Ground glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. 1200 grit surface. K2.72073.0 Frameglow Mask 4:3 and 16:9, Spherical 231 Frameglow mask for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 or 16:9 mode with spherical lenses. Includes rectangles for 1.78:1 and 2.39:1 (flat) and stubs for 1.33:1 inside of 1.78:1. K2.72070.0 Ground Glass 4:3, Scope 2x, 800 538 Ground Glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with 2x anamorphic lenses. Includes one rectangle for 2.39:1 (Scope 2x) and stubs for 1.78:1. 800 grit surface. K2.72091.0 Ground Glass 4:3, Scope 2x, 1200 538 Ground Glass forlex Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with 2x anamorphic lenses. Includes one rectangle for 2.39:1 (Scope 2x) and stubs for 1.78:1. 1200 grit surface. K2.72074.0 Frameglow Mask 4:3, Scope 2x 231 Frameglow mask for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with 2x anamorphic lenses. Includes one rectangle for 2.39:1 (Scope 2x) and stubs for 1.78:1. K2.72079.0 Ground Glass 4:3, Blank, 800 538 Ground glass forlex Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with no markings. 800 grit surface. K2.72092.0 Ground Glass 4:3, Blank, 1200 538 Ground glass forlex Studio, LEX XT Studio or LEX SXT/SXR Studio in 4:3 mode with no markings. 1200 grit surface. K2.72096.0 Ground Glass 16:9, Blank, 800 538 Ground glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 16:9 mode with no markings. 800 grit surface. Page 27

Price List LEX Viewfinders 05/2015 K2.72097.0 Ground Glass 16:9, Blank, 1200 538 Ground glass for LEX Studio, LEX XT Studio or LEX SXT/SXR Studio in 16:9 mode with no markings. 1200 grit surface. K2.72095.0 Frameglow Mask for Blank Ground Glasses 231 Provides REC, BT and FULL warning indicators in the bottom of the optical viewfinder frame when a blank ground glass is used on LEX Studio, LEX XT Studio or LEX SXT/SXR Studio. K4.52722.0 Ground Glass/Frameglow tool 87 tool with an M3 thread on one end for removing LEX Studio, LEX XT Studio, LEX SXT/SXR Studio, RRICM Studio and RRICM Lite ground glasses as well as LEX Studio and LEX XT Studio field lenses. lso used for inserting and removing Internal Filter Module (IFM) FSND filters. 1.5mm llen key on the other end is for adjusting LEX Studio, LEX XT Studio, RRICM Studio and RRICM Lite frameglows. Note: RRICM field lenses cannot be removed with this tool; use RRICM Ground glass/fieldlens tool (K4.52685.0) instead. Page 28

LEX Electronic ccessories 012 LEX Electronic Remote Control ccessories RCU-4 For RCU-4 cables look for 'LEX Ethernet Remote Cables' and 'LEX Ethernet Extension Cable' in the 'LEX Cables' section of this price list. 026 LEX Remote Control RCU-4 K2.72036.0 Remote Control Unit RCU-4 2.340 The Remote Control Unit RCU-4 is a compact accessory that allows complete remote control of LEX Classic, LEX Classic with XR Module upgrade, LEX XT, LEX SXT and LEX SXR family of cameras. The RCU-4 is simple to operate and will function with extreme reliability in even the most hostile environments. K2.72040.0 1x LEX Ethernet Remote Cable (2.00m/6.6ft) KC 157-S This cable connects the Ethernet socket of the RCU (Lemo 10 pin) to the camera's Ethernet socket (Lemo 10 pin). lso includes an optional flexible RCU-4 protective cover. Not included: RRI Shoulder Strap (K2.72045.0). LEX Battery dapters Battery adapters provide a connection between third party on-board batteries and LEX Classic, LEX Classic with XR Module upgrade, LEX XT, LEX SXT and LEX SXR family of cameras. They are available for Gold mount or V-lock, and also for top or back mounting. 027 LEX Battery dapters K2.72003.0 Battery dapter Back for Gold Mount (BB-G) 302 ttaches to the back of the LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX Studio, LEX HD, LEX HD Plus, LEX XT, LEX XT M body, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus or LEX SXT Studio and accepts Gold mount on-board batteries. Batteries can be hot-swapped. K2.72010.0 Battery dapter Back for V-lock (BB-V) 301 ttaches to the back of the LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX Studio, LEX HD, LEX HD Plus, LEX XT, LEX XT M body, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus or LEX SXT Studio and accepts V-lock on-board batteries. Batteries can be hot-swapped. K2.72006.0 Battery dapter Top for Gold Mount (BT-G) 302 ttaches to the top of the LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX Studio, LEX HD, LEX HD Plus, LEX XT, LEX XT M body, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus or LEX SXT Studio and accepts Gold mount on-board batteries. Batteries can be hot-swapped. K2.72011.0 Battery dapter Top for V-lock (BT-V) 302 ttaches to the top of the LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX HD, LEX HD Plus, LEX XT, LEX XT M body, LEX XT Plus, LEX SXT EV or LEX SXT Plus and accepts V-lock on-board batteries. Batteries can be hot-swapped. Page 29

LEX Electronic ccessories LEX Cables Note 1: BNC cables can be found in the section 'MIR and LEX'. Note 2: The 'UMC Connection Cable' for LEX and the LDD-FP cables can be found in the 'Pro Camera ccessories' price list. 028 LEX Cables K2.72087.0 SMPTE 311 Cable (20 m/65 ft) 1.050 Hybrid fiber/copper (signal and power) cable that carries image data, control data and power. Connects LEX M or LEX XT M head and body for remote applications. K2.72081.0 SMPTE Steadicam Cable (5 m/16 ft) 1.015 Extremely thin and flexible hybrid fiber/copper cable that carries image data, control data and power. Connects LEX M or LEX XT M head and body for Steadicam use. K2.72082.0 SMPTE Cleaning Pen 99 Tool for cleaning the optical fiber ends of the SMPTE cable connectors. K2.72012.0 Viewfinder Cable Short (0.35m/1.2ft) KC 150-S 267 Connects the Electronic Viewfinder EVF-1 to the EVF socket on LEX, LEX XT and LEX SXT/SXR cameras. Ideal length for use of EVF-1 on camera left side in handheld mode. K2.72013.0 Viewfinder Cable Medium (0.65m/2.1ft) KC 151-S 278 Connects the Electronic Viewfinder EVF-1 to the EVF socket on LEX, LEX XT and LEX SXT/SXR cameras. Ideal length for use of EVF-1 on camera right side or when using Viewfinder Extension Bracket VEB-1 or VEB-3. K2.72014.0 Viewfinder Cable Long (2.00m/6.6ft) KC 152-S 293 Connects the Electronic Viewfinder EVF-1 to the EVF socket on LEX, LEX XT and LEX SXT/SXR cameras. Longest possible length for use with specialty rigs. K2.47771.0 Heated Eyecup Cable KC-42 282 coiled cable that connects the Heated Eyecups HE-3, HE-4, HE-5, HE-6 and HE-7 to the RS connector on RRI cameras. K2.72021.0 LEX Ethernet/RJ-45 Cable (3.00m/9.8ft) KC 153-S 118 Connects the ETHERNET socket (Lemo 10 pin) on the LEX, LEX XT and LEX SXT/SXR family of cameras to any standard RJ-45 Ethernet socket for updates, other service purposes or to remotely control the camera from a computer via the built-in web server. K2.72031.0 LEX 12V ccessory Cable KC 154-SP-S 131 spiral cable that connects the 12V socket on the LEX, LEX XT and LEX SXT/SXR family of cameras (Lemo 2 pin) to any accessory with an XLR 4 pin socket. K0.71032.0 LEX 3D Cable Set 334 One LEX EXT to EXT Cable (K2.72032.0) for sensor and HD output sync and one LEX Ethernet to Ethernet Cable (K2.72033.0) for camera settings sync. K2.72032.0 1x LEX EXT to EXT Cable (2.00m/6.6ft) KC 155-S K2.72033.0 1x LEX Ethernet to Ethernet Cable (2.00m/6.6ft) KC 156-S K2.72032.0 LEX EXT to EXT Cable (2.00m/6.6ft) KC 155-S 187 Connects the EXT socket (Fischer 16 pin) on the LEX, LEX XT and LEX SXT/SXR family of cameras to the EXT socket on another LEX, LEX XT and LEX SXT/SXR camera in order to synchronize sensor readout and HD output clocks for 3D and other applications where precise synchronization of two cameras is needed. Can be used concurrently with the Ethernet to Ethernet Cable (K2.72033.0), which allows synchronizing the settings of one camera to the other. K2.72033.0 LEX Ethernet to Ethernet Cable (2.00m/6.6ft) KC 156-S 147 Connects the Ethernet socket (Lemo 10 pin) on the LEX, LEX XT and LEX SXT/SXR family of cameras to the Ethernet socket (Lemo 10 pin) on anotherlex, LEX XT and LEX SXT/SXR camera in order to synchronize the settings of one camera to another for 3D and other applications. Can be used concurrently with the EXT to EXT Cable (K2.72032.0), which will provide precise sensor and HD output synchronization. Page 30

LEX Electronic ccessories K2.72041.0 LEX Ethernet Remote Cable (1.00m/3.3ft) KC 158-S 226 Connects the Ethernet socket of the LEX, LEX XT and LEX SXT/SXR family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin). This is a good length cable when the RCU-4 is mounted on the camera. Can be extended with LEX Ethernet Extension Cable (K2.72043.0). K2.72040.0 LEX Ethernet Remote Cable (2.00m/6.6ft) KC 157-S 226 Connects the Ethernet socket of the LEX, LEX XT and LEX SXT/SXR family of cameras (Lemo 10 pin) to the Ethernet socket on the RCU-4 (Lemo 10 pin). This is a good length cable when the RCU-4 is used close to the camera. Can be extended with LEX Ethernet Extension Cable (K2.72043.0). K2.72043.0 LEX Ethernet Extension Cable (15.00m/50ft) KC 159-S 395 Extends the Ethernet Remote Cable KC 157 (K2.72040.0) or Ethernet Remote Cable KC 158 (K2.72041.0). Three KC 159-S (15m) plus one Remote Cable can be combined for a maximum total length of 47 m (154 feet) or 46 m (151 feet). K2.72038.0 LEX EXT Distribution Box (EDB-1) 847 box that provides three more EXT sockets for the simultaneous use of 3D Sync and UMC-3. Comes with a built-in short cable to connect to the LEX EXT connector. K2.41966.0 Power Cable Straight (2m/6.6 feet) KC-20 138 Connects the 24 V BT (2 pin Fischer) power input of the RRICM, RRIFLEX, LEX, LEX XT and LEX SXT/SXR cameras to a battery power output with an XLR 3 pin connector. K2.44693.0 Power Cable Coiled KC-29 169 Connects the 24 V BT (2 pin Fischer) power input of the RRICM, RRIFLEX, LEX, LEX XT and LEX SXT/SXR cameras to a battery power output with an XLR 3 pin connector. LEX Other Electronic ccessories The Power Supply NG 12/26 R (K2.47351.0) can be found in the 'MIR and LEX' section. The RRI Electronic Control System, Lens Data System components and the Lens Data Display for Focus Pullers (LDD-FP) with its accessories can be found in the 'Pro Camera ccessories' price list. 029 LEX Other Electronic ccessories T0.0006.0 Page 31

LEX Mechanical ccessories 013 LEX Mechanical Camera Support ccessories Please note that bridge plates, bridge plate adapters, support rods and lens supports can be found in the 'Pro Camera ccessories' price list. 030 LEX Camera Support K2.72102.0 Universal dapter Plate (UP-1) 194 With the UP-1 the camera can be quickly moved from a traditional RRI cine-style bridge plate (including BP-3, 5, 8 or 9) to a Steadicam dove tail plate. It attaches to the front and back foot of LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX XT, LEX XT M body, LEX XT Plus, LEX SXT EV or LEX SXT Plus with a tight and secure fit. dditionally, it is also used to attach the LEX M or LEX XT M body to the LEX M D-Bracket. The UP-1 fulfills all the tasks of the BP-2, however it does obscure the shoulder cut out of the camera and is slightly heavier than the BP-2. The UP-1 is not compatible with LEX Studio or LEX XT Studio. K2.72002.0 Wedge dapter (W-1) 80 ttaches to the bottom of the front foot of LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX XT, LEX XT M body, LEX XT Plus. LEX SXT EV or LEX SXT Plus. With the W-1 attached, the camera can be attached to RRI, SONY or Panasonic video-style quick release plates. Not compatible with LEX Studio or LEX XT Studio. K2.72017.0 Leveling Block (LB-1) 59 ttaches to the bottom of the back foot of LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX XT, LEX XT M, LEX XT Plus, LEX SXT EV or LEX SXT Plus. Prevents the camera from resting on a back mounted battery when placed on a flat surface. Not needed on LEX Studio, XT Studio or SXT Studio. Page 32

LEX Mechanical ccessories LEX Hand Held, Handles and Mounts Please note that the handgrip set for LEX, individual handgrips, handgrip accessories and the Center Camera Handle (CCH-2, K2.73002.0, the handle for the LEX M head) can be found in the 'Pro Camera ccessories' price list. 031 LEX Hand Held, Handles and Mounts K2.72083.0 Shoulder Pad (SP-4) 123 ttaches with velcro to the shoulder arch at the bottom of the LEX, LEX Plus, LEX Plus 4:3, LEX Studio, LEX XT, LEX XT M Body, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus or LEX SXT Studio. K2.72007.0 Center Camera Handle (CCH-1) 275 ttaches to the top of the LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX Studio, LEX XT, LEX XT M body, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus or LEX SXT Studio camera and provides numerous 3/8"-16 UNC threaded mounting points for accessories. Can be used when the BT-G adapter is attached to the top of the camera, but not with the BT-V adapter or when any on-board battery is mounted in the top position. K2.72016.0 Side Camera Handle (SCH-1) 1.023 ttaches to the top of the LEX, LEX Plus, LEX Plus 4:3, LEX M body, LEX Studio, LEX XT, LEX XT M body, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus or LEX SXT Studio camera and provides numerous 3/8"-16 UNC threaded mounting points for accessory mounting. Front extension must be taken off when used with LEX Studio or LEX XT Studio and OVF-1. Includes djustable Center Grip Medium (CG-1) for use with top mounted batteries of different heights. K2.72022.0 djustable Center Grip Tall (CG-2) 302 ttaches to the Side Camera Handle (SCH-1) instead of the djustable Center Grip Medium (CG-1). Provides enough space for third party on-board recorders of different heights. K2.72015.0 Handle Extension Block (HEB-2) 182 ttaches to the Center Camera Handle (CCH-1) or any 3/8"-16 UNC threaded mounting point. When attached to the front of the Center Camera Handle (CCH-1), the tape hook is excatly in the sensor plane. Includes three 3/8"-16 UNC threaded mounting points. K2.72023.0 Low Mode Support (LMS-3) 787 low mode plate with numerous 3/8-16 mounting points, two tape hooks and optional feet. Compatible with LEX, LEX Plus, LEX Plus 4:3, LEX Studio (EVF-1 only), LEX XT, LEX XT Plus, LEX XT Studio (EVF-1 only), LEX SXT EV, LEX SXT Plus and LEX SXT Studio (EVF-1 only). For use with LEX Studio, LEX XT Studio or LEX SXT Studio with the optical viewfinder OVF-1, the LEX Studio LMS Feet (K2.72093.0) are required. The LMS top plate has mounting points for the Viewfinder Mounting Bracket VMB-1, VMB-2 or VMB-3, the LEX Camera Center Handle CCH-1 (which must be mounted in reverse to ensure that the tape hook of the HEB-2 is still in the proper sensor plane position) and the 235 and D-21 low mode handles. The plate itself can be attached directly to the camera s top for the lowest possible profile. The feet allow the plate to be raised when the Viewfinder Mounting Bracket VMB-1, VMB-2 or VMB-3, Battery dapter Top for Gold Mount (BT-G), Battery dapter Top for V-lock (BT-V) and/or other accessories should remain mounted to the camera's top. K2.72093.0 LEX Studio LMS Feet 99 Three 46 mm tall feet that allow the use of the LMS-3 with LEX Studio, LEX XT Studio or LEX SXT Studio with the Optical Universal Viewfinder OVF-1 attached. K0.71015.0 LEX M Cage (MC-1) 763 Cage for the LEX M or LEX XT M front-end (head). Offers numerous 3/8"-16 UNC threaded mounting points for accessory mounting, 15 mm rod receptacles, and rosettes for attaching hand grips. K2.72086.0 1x Pair of Side Brackets (SB-1) K2.73003.0 1x LEX M Cage Plate 2 (CP-2) K2.73005.0 1x LEX M Bridge Plate dapter 2 (MB-2) Page 33

LEX Mechanical ccessories K2.73005.0 LEX M Bridge Plate dapter 2 (MB-2) 443 dapts the LEX M or LEX XT M head to cine-style bridge plates, including the BP-3, 5, 8 or 9. Provides a standard rosette mount on left and right side for hand grip attachment, and mounting points for the LEX M Side Brackets (SB-1) and the LEX M D-Bracket (MD-1). Includes 15 mm rod adapter (K4.73025.0). K2.73003.0 LEX M Cage Plate 2 (CP-2) 99 Counterpart to LEX M Bridge Plate dapter 2 (MB-2). Provides mounting points for the LEX M Side Brackets (SB-1). Has additional mounting points for the LEX M D-Bracket (DM-1). K2.72086.0 Pair of Side Brackets (SB-1) 221 Sidebrackets with numerous 3/8"-16 UNC threaded mounting points for accessory mounting. Connects to LEX M Bridge Plate dapter (MB-1) and LEX M Cage Plate (CP-1). K2.73004.0 LEX M D-Bracket (MD-1) 220 Provides additional mounting options for the LEX M or LEX XT M camera head. llows attachment of LEX M or LEX XT M body onto the LEX M or LEX XT M head when used in combination with LEX M Dovetail Bracket MDB-1 (K2.73007.0), LEX M Dovetail Plate MDP-1 (K2.73008.0) and Universal dapter Plate UP-1 (K2.72102.0). K2.73007.0 LEX M Dovetail Bracket (MDB-1) 210 ttaches to LEX M D-Bracket MD-1 (K2.73004.0). Holds LEX M Dovetail Plate MDP-1 (K2.73008.0). K2.73008.0 LEX M Dovetail Plate (MDP-1) 172 Counterpart to LEX M Dovetail Bracket MDB-1 (K2.73007.0). ttaches underneath Universal dapter Plate UP-1(K2.72102.0) for mounting the LEX M or LEX XT M body onto the LEX M or LEX XT M head. K4.73025.0 Rod dapter 15mm 272 ttaches to LEX M Bridge Plate dapters (MB-1/2) LEX Other Mechanical ccessories Please note that follow focus units, matte boxes, tripod heads, mounting arms, dovetail and 3/8-16 adapters can be found in the "Pro Camera ccessories" price list. 032 LEX Other Mechanical ccessories K2.72026.0 LEX Rain Protector (RP-1) 480 raincover custom designed for LEX, LEX Plus, LEX Plus 4:3, LEX Studio, LEX XT, LEX XT Plus, LEX XT Studio, LEX SXT EV, LEX SXT Plus and LEX SXT Studio. Works with prime lenses, zoom lenses, rain deflectors and matte boxes up to MB-14. Includes special ventilation openings for the LEX cooling system and transparent windows for all relevant camera user interfaces. Provides access to hand grip, follow focus, back side battery and SxS card slots and has an opening for a monitor arm. dditional covers for on-board monitor, viewfinder extension, and french flag included. Comes with ist own carrying bag. Page 34

LEX Mechanical ccessories LEX Cases The ccessory Case (K2.0001241) can be found in the section 'MIR and LEX' 033 LEX Cases K2.72030.0 LEX Case 564 carrying and shipping case that holds one LEX, LEX Plus, LEX Plus 4:3, LEX XT, LEX XT Plus, LEX SXR EV, LEX SXR Plus, LEX SXT EV or LEX SXT Plus camera body with Electronic Viewfinder EVF-1, viewfinder mounting bracket, Center Camera Handle CCH-1 or Side Camera Handle SCH-1 and various accessories and cables. K2.73011.0 LEX M/LEX XT M Case 564 carrying and shipping case that holds one LEX M or LEX XT M camera body and camera head with various accessories and cables. K2.72075.0 LEX Studio Case 564 carrying and shipping case that holds one LEX Studio, LEX XT Studio, LEX SXR Studio or LEX SXT Studio camera body with Optical Universal Viewfinder OVF-1, Battery dapter Back, BP-8, Center Camera Handle CCH-1 or Side Camera Handle SCH-1 attached. Contains additional slots for viewfinder port cover, camera port cover, base plate, long optical viewfinder extension, 5x SxS PRO or SxS PRO+ card cases, front extension of Side Camera Handle SCH-1 and Eyepiece Leveler EL-3. Contains clips for 2x 19 mm rods and one general slot for cables and other accessories. Page 35

LEX Service and Testing 014 LEX Service Extended and Warranties Testing LEX extended warranties are designed to reduce the fixed cost of ownership after the camera's first year of warranty has expired. Each extended warranty covers one LEX camera for one year for all parts and labor required due to defects in materials or workmanship that prevent the camera, any installed options and the viewfinder from operating within factory specifications. Once the extended warranty is active, there is never any time lost waiting for purchase orders or payments that would otherwise be needed for out of warranty repairs. dditionally, cameras covered under warranty (original or extended ) go into a priority repair queue and so downtime is reduced to the absolute minimum. 034 LEX Extended Warranties K9.72010.0 Extended Warranty for LEX EV 1.950 Extended Warranty Plan for LEX, LEX XT, LEX SXR EV or LEX SXT EV. Includes coverage of SxS module (LEX), XR module (LEX XT) or SXR Module (SXR and SXT) and Electronic Viewfinder EVF-1. K9.72020.0 Extended Warranty for LEX 16:9 Plus 2.350 n extended warranty for LEX 16:9 Plus. Includes coverage of SxS module and Electronic Viewfinder EVF-1. K9.72030.0 Extended Warranty for LEX 4:3 Plus 2.750 n extended warranty for LEX Plus 4:3, LEX XT Plus, LEX SXR Plus or LEX SXT Plus. Includes coverage of SxS module (LEX Plus 4:3), XR module (LEX XT Plus) or SXR Module (SXR and SXT) and Electronic Viewfinder EVF-1. K9.72050.0 Extended Warranty for LEX M 2.350 n extended warranty for LEX M or LEX XT M. Includes coverage of SxS module (LEX M) or XR module (LEX XT M) and Electronic Viewfinder EVF-1. K9.72040.0 Extended Warranty for LEX Studio 3.750 n extended warranty for LEX Studio, LEX XT Studio, LEX SXR Studio or LEX SXT Studio. Includes coverage of SxS module (LEX Studio), XR module (LEX XT Studio) or SXR Module (LEX SXR Studio and LEX SXT Studio) and Optical Universal Viewfinder OVF-1. LEX Service 035 LEX Service K9.72070.0 LEX Service Certificate 750 thorough check up of your LEX camera including its image quality, recording functions, connectors, flange focal distance, audio system and lens control system. Includes an update to the latest Software Update Packet (SUP) and a printed certificate. K9.72060.0 LLEX dvanced Level Service Workshop 1.920 For current or aspiring camera technicians. Covers service and maintenance of all LEX camera models, tailored to your individual needs. Includes error analysis, regular maintenance procedures, operation of test equipment and special tools. Participation qualifies for access to special tools, test equipment and spare part sets designed for LEX dvanced Level Service only. Each participant and company will receive an RRI dvanced Level Service Training certificate. Page 36

LEX MIR and LEX Notes 015 MIR MIR and LEX and Notes LEX Notes 036 MIR and LEX Notes T0.0001.0 This price list replaces all previously published LEX and MIR price lists. T0.0002.0 T0.0004.0 T0.0005.0 For lenses, please refer to the "RRI Lenses" price list. For the RRI Electronic Control System, follow focus units, matte boxes, tripod heads, more dovetail and 3/8-16 adapters as well as more bridge plate parts and support rods, please refer to the "Pro Camera ccessories" price list. "phase out" indicates items that will be discontinued and are available until stock runs out. "new" indicates items that have been added since the last publication of this price list. Page 37

Price List 05/2015 General Sale and Delivery Terms and Conditions for Merchants(1) 1. General; Scope The terms and conditions delineated herein shall be the sole terms and conditions which apply to all of RRI s current and future business transactions. Unless RRI has approved of such in writing, any terms or conditions which conflict with, deviate from or modify the terms and conditions delineated herein shall not be binding on RRI irrespective of whether RRI had prior notice of such terms or conditions. RRI hereby expressly objects to any such conflicting, deviating or modified terms or conditions. 2. Contract Formation 2.1 ny offers made by RRI shall be without obligation and subject to change without notice provided that the parties have not agreed to a lock-up period. 2.2 The customer is bound to its order for a period of four weeks after its receipt by RRI. contract is deemed to exist upon the customer s receipt of RRI s written confirmation regarding the order or the effective delivery of the applicable goods to the customer pursuant to the terms hereof. 2.3 The scope and type of delivery for an order shall be established solely through RRI s written confirmation relating to such order. ny errors or omissions in RRI s sales prospectus, pricelists, offer documents or other related documentation may be amended without RRI incurring any liability for damages or compensation in relation to such errors or omissions. 3. Payment, Set-Off, Withholding 3.1 The purchase price for the contract shall be that price which is specified by RRI for such contract and shall apply ex works, exclusive of any value-added tax; if the price is not indicated, the pricelist then in effect shall apply. If the sale has occurred through delivery to a place other than the place of performance (at the customer s request), any costs incurred for packaging, shipping, freight, customs or other related costs will be charged separately. If the customer fails to accept delivery when tendered by RRI, it must nevertheless make payment. 3.2 In the event that the manufacturing costs for the contracted goods (including, but not limited to, wages, salaries, materials or production costs) rise subsequent to formation of the contract, RRI shall have the right to increase the purchase price in accordance therewith. 3.3 Invoices from RRI are due upon RRI making the goods available to the customer and are payable without deductions within 10 days of the issuance thereof. Upon a default in payment, any overdue amounts will accrue interest at a rate of 8% above the basic interest rate. RRI reserves its right to assert any further claims regarding damages resulting from a default. 3.4 The customer can offset its payments only if its counterclaim thereto have been judicially sustained or recognized by a declaratory judgment. right to withholding shall only apply to counterclaims arising specifically from the contract which is the subject of such withholding. 4. Delivery 4.1 The dates for delivery and/or the making available of the goods are not binding unless a date for such has been agreed to in writing by RRI. 4.2 RRI is entitled to carry out advance and/or partial deliveries of the goods. 4.3 In the event that RRI is unable to deliver or make the goods available to the customer due to events of force majeure lasting for a period of three months or more, RRI s obligation to deliver or make the goods available shall be deemed extinguished in its entirety. 4.4 RRI shall be entitled to postpone delivery or availability of the goods for the entire duration of the force majeure events. 4.5 Events of force majeure shall be deemed to be any events which are beyond RRI s control and which make delivery impossible or unreason-ably difficult, including, for example, strikes, lawful lockouts, war, import or export prohibitions, scarcity of energy supplies or raw materials, or the delayed delivery to RRI of goods required for the performance of its obligations hereunder for reasons beyond RRI s control. If RRI is released from its obligations as described in Section 4.3 above, the customer shall be entitled to rescind the applicable contract. Compensation for damages for non-performance can be claimed by the customer only if the default in delivery is due to RRI s gross negligence or is intentionally caused by RRI. 5. Transfer of Risk 5.1 The risk of loss or damage to the goods passes to the buyer as soon as RRI has dispatched the goods from its premises (i.e., plant, factory or warehouse) or upon the surrendering of the goods to the applicable carrier or to the customer itself, as the case may be. The above shall also apply in the event that RRI serves as the carrier for the goods.5.2 If the forwarding or collection of the goods is delayed due to reasons attributable to the customer, the risk of loss shall be transferred to the customer upon the readiness of the

Price List 05/2015 General Sale and Delivery Terms and Conditions for Merchants(1) goods for dispatch. 6. Defective Goods 6.1 The customer must inspect the delivered goods immediately upon its receipt of such. The customer must notify RRI in writing of any apparent defects within one week of the goods receipt. RRI must be notified of hidden defects in writing within two weeks of their emergence but in no event later than one year after delivery of such goods. In the event that the customer fails to meet the aforementioned notification obligations, the goods shall be deemed to have been accepted and the rights set forth in Sections 6.2 and 6.3 below shall not be in effect. 6.2 In the event that the customer has notified RRI of defects in a timely manner and is thus eligible to make a claim for reperformance, RRI shall have the right, at its own cost, either to remedy the defect or to redeliver conforming goods. 6.3 If RRI twice fails to remedy a defect or if RRI is otherwise unable to accomplish ist re-performance obligation or fails to do so within a time period reasonably set forth by the customer, the customer shall be entitled to reduce the purchase price under the contract or to cancel the contract. Instead of seeking performance, the customer can make a claim for damages or for compensation for expenses. However, if the customer elects to rescind the contract it shall have no right to make any claim for damages with respect to the defective goods. 6.4 Provided that RRI has not acted fraudulently, any claims of the customer regarding the goods shall become void and unenforceable one year after delivery of the applicable goods. 6.5 The prescription period of one year in Section 6.4 above shall be replaced by a prescription period of two years for goods from the product range Light of RRI that are distributed under the brand RRI. 7. Liability 7.1 RRI shall be liable for any damage hereunder caused by it intentionally or caused by ist gross negligence. 7.2 In the event of simple negligence by RRI, RRI shall be liable only for ordinary and foreseeable damage arising from the contract, and only to the extent that RRI has breached material contractual obligations. Further, in the event of simple negligence by RRI, RRI shall be liable for personal injury and/or healthrelated damage attributable to RRI. 7.3 RRI shall not be liable for consequential damages and unforeseen damages (including consequential damages resulting from defective goods) as well as loss of profits in the event it has acted with simple negligence. 7.4 RRI shall be subject to no liability beyond that which is delineated in this Section 7. 7.5 To the extent that RRI s liability is excluded or limited, such exclusion or limitation shall apply to any persons or entities employed by RRI in the performance of ist contractual obligations. 7.6 The limitations of liability delineated herein shall not apply to any legally prescribed strict liability, in particular any such strict liability arising from laws regarding guarantees or product warranties. 8. Retention of Title 8.1 Ownership of the delivered goods shall remain with RRI until it has received full payment for such goods. Title to the goods shall first pass to the customer upon RRI s receipt of all payments which are due under the current applicable contract. 8.2 Prior to obtaining title to the goods, the customer is not entitled to pledge, to assign by way of security, to process or to alter the goods. The customer is, however, authorized to sell the goods to third parties in the ordinary course of business unless a nonassignability agreement regarding the consideration exists between the customer and the third party. If a third party acquires an interest in the goods through a resale to such party, the customer agrees to assign to RRI all of ist correlating rights and claims against such third party. RRI hereby accepts such assignment. 8.3 ny combination, amalgamation and/or processing of the goods (sections 947, 948 and 950 BGB [German Civil Code]) shall be deemed to have been made on behalf of RRI. RRI shall acquire title to the resulting product in the ratio of the invoiced value of the goods and services provided by RRI to the total invoiced value of the resulting product. If the goods have been re-sold to a third party, the assignment of rights and claims performed in accordance with Section 8.2 above shall be valid solely up to the amount of the invoiced value of goods and services provided by RRI. 8.4 Upon a default in payment by the customer, RRI has the right to disclose to any applicable third party that it holds an interest in the goods pursuant to the assignment delineated above and to assert any of ist claims directly. The customer is obligated to provide and deliver to RRI all documentation required for the assertion of such claims. The customer must also make available to RRI, completely and in a timely fashion, all information about any events that might affect the obligations described above.

Price List 05/2015 General Sale and Delivery Terms and Conditions for Merchants(1) 9. Jurisdiction; Governing Law 9.1 The parties hereto agree that the exclusive jurisdiction for any transaction and/or contract between the parties is Munich, Germany. 9.2 The relationship of the parties hereto shall be exclusively governed by and in all respects construed in accordance with the laws of the Federal Republic of Germany with no application whatsoever of the United Nations sales law. Last modified: 1st January 2006 (1)Kaufleute as defined in the HGB [German Commercial Code]

llgemeine Verkaufs- und Lieferbedingungen der rnold & Richter Cine Technik GmbH & Co Betriebs KG für Kaufleute 1. llgemeines - Geltungsbereich Diese Geschäftsbedingungen gelten für die gesamte gegenwärtige und künftige Geschäftsbeziehung ausschließlich. Entgegenstehende oder abweichende Geschäftsbedingungen oder vertragsändernde Bestimmungen sind selbst bei Kenntnis unverbindlich, wenn RRI ihrer Geltung nicht schriftlich zustimmt. Ihnen wird hiermit ausdrücklich widersprochen. 2. Vertragsschluss 2.1 Die ngebote von RRI sind freibleibend und unverbindlich, sofern keine Bindungsdauer vereinbart wurde. 2.2 Der Kunde ist an seinen uftrag vier Wochen nach Zugang bei RRI gebunden. Ein Vertrag kommt mit Zugang der schriftlichen Bestätigung von RRI oder nlieferung beim Kunden zustande. 2.3 rt und Umfang der Lieferung bestimmt sich ausschließlich nach der uftragsbestätigung durch RRI. Etwaige irrtumsbedingte Fehler in Verkaufsprospekten, Preislisten, ngebotsunterlagen oder sonstigen Dokumentationen von RRI dürfen berichtigt werden, ohne dass eine Schadensersatzpflicht entsteht. 3. Zahlung, ufrechnung, Zurückbehaltungsrecht 3.1 Der Kaufpreis ist der von RRI genannte Preis, und gilt ab Werk, exklusive MwSt., soweit nicht genannt gilt die gültige Preisliste. Beim Versendungskauf werden Verpackungs-, Verladungs-, Frachtkosten, Zollkosten oder sonstige Kosten gesondert berechnet. Befindet sich der Kunde am Fälligkeitstag im nnahmeverzug, muss er dennoch den Kaufpreis zahlen. 3.2 Steigen nach Vertragsschluss die Kostenfaktoren für die Herstellung des Vertragsgegenstandes, insbesondere aber nicht abschließend Löhne, Gehälter, Material- oder Produktionskosten ist RRI berechtigt, die Preise entsprechend zu erhöhen. 3.3 Rechnungen von RRI sind nach Bereitstellung der Ware ohne bzug fällig und innerhalb von 10 Tagen nach usstellung zahlbar. Bei Verzug ist die Geldschuld mit 8% über dem Basiszinssatz zu verzinsen. Die Geltendmachung weitergehender Verzugsschäden ist vorbehalten. 3.4 Der Kunde kann nur mit rechtskräftig festgestellten oder anerkannten Gegenansprüchen aufrechnen. Ein Zurückbehaltungsrecht des Kunden besteht nur bei Gegenansprüchen aus demselben Vertragsverhältnis. 4. Lieferung 4.1 Die Liefer- bzw. Bereitstellungszeiten sind unverbindlich, sofern nicht schriftlich ein Fixtermin vereinbart wurde. 4.2 RRI ist zu Vorab- und Teillieferungen berechtigt. 4.3 Wird RRI die Lieferung bzw. Bereitstellung infolge höherer Gewalt, mindestens für einen Zeitraum von 3 Monaten unmöglich, entfällt die Lieferpflicht. 4.4 RRI ist berechtigt, die Lieferung bzw. Bereitstellung um die Dauer der Behinderung hinauszuschieben. 4.5 Unter den Begriff der höheren Gewalt fallen alle Umstände, welche RRI nicht zu vertreten hat und durch die die Lieferung unmöglich oder unzumutbar erschwert wird, wie z.b. Streik, rechtmäßige ussperrung, Krieg, Ein- und usfuhrverbote, Energie- und Rohstoffmangel und von RRI nicht zu vertretende, nicht rechtzeitige Selbstlieferung. Wird RRI von seiner Lieferpflicht frei, kann der Kunde vom Vertrag zurücktreten. Schadensersatz wegen Nichterfüllung darf der Kunde nur geltend machen, wenn der Lieferverzug auf grobem Verschulden oder auf Vorsatz von RRI beruht. 5. Gefahrübergang 5.1 Die Gefahr geht auf den Kunden über, sobald der Vertragsgegenstand ab Werk abgesendet bzw. an die den Transport ausführende Person oder den Kunden übergeben wird. Dies gilt auch beim Transport durch RRI. 5.2 Verzögert sich der Versand bzw. die bholung infolge von Umständen, die der Kunde zu vertreten hat, so geht die Gefahr mit der Versandbereitschaft auf ihn über. 6. Rechte des Kunden bei Mängeln 6.1 Der Kunde hat die Sache unverzüglich zu untersuchen. Offensichtliche Mängel sind binnen einer Woche nach Zugang der Ware schriftlich anzuzeigen, verdeckte Mängel binnen 2 Wochen nach deren uftreten, spätestens innerhalb eines Jahres. Versäumt der Kunde diese usschlussfristen gilt die Ware als genehmigt. Rechte aus Ziffer 6.2 und 6.3 bestehen nicht.

Price List 05/2015 llgemeine Verkaufs- und Lieferbedingungen der rnold & Richter Cine Technik GmbH & Co Betriebs KG für Kaufleute 6.2 Steht dem Kunden aufgrund eines rechtzeitig angezeigten Mangels ein Nacherfüllungsanspruch zu, kann RRI den Mangel unentgeltlich beseitigen oder eine mangelfreie Sache liefern. 6.3 Schlägt eine Nachbesserung durch RRI zweimal fehl, erbringt RRI die Nacherfüllung nicht oder nicht innerhalb der vom Kunden gesetzten angemessenen Nachfrist, kann der Kunde mindern oder vom Vertrag zurücktreten. Der Kunde kann statt der Leistung ufwendungs- oder Schadensersatz verlangen. Wählt der Kunde den Rücktritt vom Vertrag, steht ihm daneben kein Schadensersatz wegen des Mangels zu. 6.4 Die nsprüche des Kunden verjähren 1 Jahr nach Übergabe der Ware sofern RRI nicht arglistig handelt. 6.5 n die Stelle der Verjährungsfrist von 1 Jahr in Ziffer 6.4 tritt eine Verjährungsfrist von 2 Jahren, sofern es sich um Waren aus dem Produktbereich Licht von RRI handelt, die unter der Bezeichnung RRI vertrieben werden. 7. Haftung 7.1 RRI haftet für Vorsatz und grobe Fahrlässigkeit. 7.2 Für einfache Fahrlässigkeit haftet RRI nur bei vertragstypischen und vorhersehbaren Schäden, sofern wesentliche Vertragspflichten (Kardinalpflichten) verletzt werden, sowie bei zurechenbaren Körper- und Gesundheitsschäden. 7.3 Eine Haftung für mittelbare und unvorhersehbare Schäden sowie Mangelfolgeschäden und entgangenem Gewinn ist bei einfacher Fahrlässigkeit ausgeschlossen. 7.4 Eine weitergehende Haftung von RRI als in diesen Geschäftsbedingungen vorgesehen ist ausgeschlossen. 7.5 Soweit die Haftung von RRI ausgeschlossen oder beschränkt ist, gilt dies auch für die persönliche Haftung von Erfüllungsgehilfen. 7.6 Diese Haftungsbeschränkungen gelten nicht für eine gesetzlich vorgeschriebene verschuldensunabhängige Haftung, insbesondere aus Garantie oder Produkthaftungsgesetz. 8. Eigentumsvorbehalt 8.1 Die gelieferten Waren bleiben bis zur vollständigen Bezahlung Eigentum von RRI. Das Eigentum geht erst mit usgleich sämtlicher Verbindlichkeiten aus der laufenden Geschäftsbeziehung auf den Kunden über. 8.2 Der Kunde ist nicht berechtigt, die Vorbehaltsware zu verpfänden, zur Sicherung zu übereignen, zu verarbeiten oder umzugestalten. Er ist berechtigt, die Ware im ordentlichen Geschäftsgang an Dritte zu veräußern, es sei denn, es besteht für die Gegenleistung ein btretungsverbot zwischen dem Kunden und dem Dritten. Erwirbt ein Dritter Rechte an dem Sicherungsgut, so tritt der Kunde schon jetzt sämtliche hierdurch entstehenden Rechte an RRI ab, die durch die Weiterveräußerung gegen den Dritten erwachsen. RRI nimmt die btretung an. 8.3 Eine Verbindung, Vermischung oder Verarbeitung des Vertragsgegenstandes ( 947, 948 und 950 BGB) gilt als im uftrag von RRI erfolgt. RRI erwirbt das Eigentum an der hergestellten Sache im Verhältnis des Rechnungswertes der eigenen Leistung zum Gesamtrechnungswert der hergestellten Sache. Im Falle der Weiterveräußerung gilt die btretung der Forderung aus dem Weiterverkauf entsprechend Ziffer 8.2 nur bis zur Höhe des Rechnungswertes der von RRI erbrachten Leistung. 8.4 Bei Verzug des Kunden kann RRI Sicherungsrechte offen legen und alle Rechte selbst geltend machen. Der Kunde muss RRI alle Unterlagen zur Geltendmachung aushändigen sowie umfassend und rechtzeitig von jedem obige Verpflichtungen betreffenden Vorgang uskunft erteilen. 9. Gerichtsstand, nwendbares Recht 9.1 Beide Parteien erklären sich mit der ausschließlichen Zuständigkeit des Gerichtsstands München einverstanden. 9.2 Es gilt ausschließlich das Recht der Bundesrepublik Deutschland unter usschluss des UN-Kaufrechtes. Stand: 1. Januar 2006