Construction Carpentry Advanced Housing Ontario College Diploma Program Code: 6785X01FPT 2 Years Academic Year: 2013/2014 This is a Mobile Learning Program. As a student in this program you will require a mobile computing device, for example a laptop or tablet computer. Our Program This two-year Ontario College Diploma program focuses on the theoretical and practical aspects of energy efficient, environmentally-responsible and healthy housing. The first year of the program develops fundamental carpentry skills from the layout and framing of floor, wall and roof systems, to installing interior and exterior finishes. In the second year, students examine energy efficient design and assemblies, advanced framing techniques, green building principles and materials and construction practices, while completing a major construction project. This program is part of Algonquin's mobile learning initiative. All students entering into the program are expected to have and use a laptop or mobile computing device that meets or exceeds the recommended hardware requirements as designated by the program. Students in the mobile learning programs will use their device to enhance their learning experience, obtain and work course materials, participate in collaborative and mlearning environments and become skilled, confident users of the technologies used within an educational environment and workplace. Hardware and software specifications are outlined at http://mlearning.algonquincollege.com. Computers and supplies can be purchased directly from Algonquin's New Technology Store at educational rates For more information please contact: Brian Duffy, Acting Academic Chair - Perth, at 613-267-2859 ext. 6063 or duffyb@algonquincollege.com. 1
Success Factors This program is well-suited for students who: Are inquisitive, well-organized and have an analytical nature. Work effectively both independently and as a member of a team. Enjoy both theoretical and hands-on learning. Are physically fit and willing to work outdoors. Your Career Graduates enter the workforce with the knowledge and skills required to perform a wide range of carpentry tasks on new construction, as well as the upgrading of existing buildings. Employment opportunities may be available in both private and public sectors, including commercial and residential construction focused on energy efficient, healthy buildings. Courses Programs at Algonquin College are delivered using a variety of instruction modes. Courses may be offered in the classroom or lab, entirely online, or in a hybrid mode which combines classroom sessions with online learning activities. Upon registration, each full-time student is provided an Algonquin email account which is used to communicate important information about program or course events. Level: 01 ARC9004 Modern Canadian Architecture 45.0 DRA9250 Drafting 30.0 ENL9212 Communications I 45.0 MAT9252 Mathematics For The Trades I 30.0 SAF9250 Construction Safety 30.0 WOO9201 Construction Carpentry I 135.0 Level: 02 DRA9260 Architectural Drafting and Blueprint Reading 30.0 MAT9261 Mathematics for the Trades II 30.0 WOO9212 Construction Carpentry II 120.0 WOO9213 Finish Carpentry 90.0 Choose one from equivalencies: GED6785 General Education Elective 45.0 2
Level: 03 BSC9200 Building Science I 75.0 CON9300 Layout And Foundations 30.0 ENL9202 Communications II 45.0 WOO9202 Advanced Building Techniques I 105.0 WOO9203 Construction Carpentry III 60.0 Level: 04 BSC9201 Building Science II 42.0 CON9143 Project Management 28.0 CON9301 Computer-Assisted Design and Estimating 28.0 LFS9202 Integrated Project 22.0 WOO9301 Advanced Building Techniques II 112.0 WOO9302 Construction Carpentry IV 98.0 Fees And Expenses Tuition Fees: $1,304.75 per term. Information Technology Fee: $62 per term. * Mobile Computing Fee: $150 per term. ** Incidental Fee: $50 in Level 02. Student Activity/Sports Fee: $210.50 per term. Student Commons/Auditorium Fee: $22 per term. Student Centre Building Fee: $17.50 per term. Health Service Fee: $20 per term. Health Plan Fee: $117.02 paid once annually. *** A $40 graduation fee is payable in the final term. A $25 transcript fee is payable in the first term a student attends Algonquin College. International Students pay all relevant Canadian fees plus an International Premium of $4,600 per term. 3
* Students paying the Information Technology fee are provided with a network account, an email address, and Internet access. For more information, please visit our website at www.algonquincollege.com/its/services/it_fee.htm. ** The Mobile Computing Fee covers the costs associated with providing various services to students registered in a mandatory laptop programs. *** Students who have coverage with another plan can request a refund by supplying the Students' Association with documentation supporting the request. This request will have to be made annually. Books, supplies and drafting instruments cost approximately $915 in the first year and $200 in the second year and can be purchased at the campus bookstore. In addition, students are required to provide their own personal protective equipment and some tools at a cost of $1,350 in the first year and $300 in the second year. A comprehensive list of the recommended tools will be sent to students in August and is available online at www.algonquincollege.com/perth. Admission Requirements Admission Requirements listed are in effect for the 2014-2015 academic year. College Eligibility Ontario Secondary School Diploma (OSSD) or equivalent. Applicants with an OSSD showing senior English and/or mathematics courses at the Basic Level, or with Workplace or Open courses, will be tested to determine their eligibility for admission; OR Academic and Career Entrance (ACE) certificate; OR General Educational Development (GED) certificate; OR Mature Student status (19 years of age or older and without a high school diploma at the start of the program). Eligibility may be determined by academic achievement testing for which a fee of $40 (subject to change) will be charged. Program Eligibility English, Grade 12 (ENG4C or equivalent). Mathematics, Grade 12 (MAP4C or equivalent). Applicants with International transcripts must provide proof of either: IELTS-International English Language Testing Service-Overall band of 6.0 with a minimum of 5.5 in each band; OR TOEFL-Internet-based (ibt)-overall 80, with the minimum of 20 in each component: Reading: 20; Listening: 20, Speaking: 20, Writing: 20. Should the number of qualified applicants exceed the number of available places, applicants will be selected on the basis of their proficiency in English and Mathematics. Application Information Applications to full-time day programs must be submitted with official transcripts showing completion of the academic admission requirements through: ontariocolleges.ca 60 Corporate Court Guelph, Ontario N1G 5J3 1-888-892-2228 4
Students currently enrolled in an Ontario secondary school should contact their Guidance Office to apply. Applications are available online at www.ontariocolleges.ca. A $95 fee applies. Applications for Fall Term, Winter Term and Spring Term admission received by February 1 will be given equal consideration. Applications received after February 1 will be processed on a first-come, first-served basis as long as places are available. International applicants applying from out-of-country can obtain the International Student Application Form at https://xweb.algonquincollege.com/formie/index.aspx or by contacting the Registrar's Office. For further information on the admissions process, contact: Registrar's Office Algonquin College Heritage Institute 7 Craig Street Perth, ON K7H 1X7 Telephone: 613-267-2859 Toll-free: 1-800-565-4723 Additional Information Part-time students may be considered if space is available. The Perth Campus is an elearning environment; to ensure your success as a student, we recommend that you bring a current laptop computer to support your studies. For more information about the program, please contact Patrick Murphy, Program Coordinator, at 613-267-2859 ext. 5616 or murphyp2@algonquincollege.com. Course Descriptions ARC9004 Modern Canadian Architecture The building styles of today, and the origins of current designs and materials are examined. The issues (i.e., environmental concerns, resource depletion and suburban sprawl) surrounding the principles behind modern architectural practices in Canada are explored. DRA9250 Drafting Drafting is an essential communication tool in the building industry. Students acquire competency in the basics of drafting for the trades. Topics of study include: freehand sketching; drafting instruments; materials and their use; lettering; isometric, oblique and orthographic drawings and shop drawings. An introduction to computerassisted drafting reinforces students' skills in pictorial and orthographic drawings. 5
ENL9212 Communications I Communication remains an essential skill sought by employers, regardless of discipline or field of study. Using a practical, vocation-oriented approach, students focus on meeting the requirements of effective communication. Through a combination of lectures, exercises, and independent learning, students practise writing, speaking, reading, listening, locating and documenting information, and using technology to communicate professionally. Students develop and strengthen communication skills that contribute to success in both educational and workplace environments. MAT9252 Mathematics for the Trades I Focus is placed on the fundamentals of trade calculations. The applications of course content to carpentry concepts include: imperial measurement, fundamentals of perimeter, area and volume measurement, a review of basic algebra, principles of ratio and proportion and elements of basic trigonometry. Students are encouraged to develop the problem-solving skills necessary for success in the trades during lecture presentations, individualized instruction, assignments and scheduled unit reviews. SAF9250 Construction Safety This course prepares students to work safely in carpentry workshops and on construction sites. Students learn safe practices when operating equipment and identify appropriate personal protective equipment. Students locate and apply regulations from the Occupational Health and Safety Act involving ladders, scaffolds and all significant aspects of safety in the workplace. Successful students receive certification in Fall Protection and WHMIS in accordance with the Construction Safety Association of Ontario. WOO9201 Construction Carpentry I An introduction to the theoretical and practical elements of construction carpentry is provided. Students become familiar with the tools, materials and construction techniques used in Canadian wood-frame construction. The selection, use and maintenance of hand tools and power tools, building construction terminology, Ontario Building Code requirements and the design and framing of floor, wall and roof systems are covered. Students organize, schedule and complete various carpentry projects, such as sawhorses, floor, wall and roof assemblies, including a small shed. DRA9260 Architectural Drafting and Blueprint Reading Students learn to read and draft architectural plans and reference residential building codes to develop the necessary skills required in the industry. Activities include retrieving information from plans and specifications and verifying material sizes and grades from tables in the building code. Students draft a variety of architectural drawings using computer software and/or standard hand drafting techniques. The process of drawing, reading and interpreting plans is the first step in understanding estimating and scheduling of construction projects. Prerequisite(s): DRA9250 MAT9261 Mathematics for the Trades II With emphasis on practical application, students expand on the fundamentals of trade calculations. Students are introduced to the basics of estimating, more applied trigonometry, construction geometry and layout using geometric principles. Students are encouraged in their learning through lectures, group research, presentations and assignments. 6
WOO9212 Construction Carpentry II Building upon acquired skills, students gain knowledge and experience in the installation of a variety of exterior finishes. Building construction terminology and Building Code requirements are covered. In addition, the following topics are covered: door and window installation; flashing techniques; design and finishing of roof and wall systems; fasteners and hardware. Prerequisite(s): SAF9250 and WOO9201 Corequisite(s): DRA9260, MAT9261 and WOO9213 WOO9213 Finish Carpentry Students study the theory and practice behind the basic use of hand tools and stationary power tools in a shop setting. Projects and exercises focus on shop safety, properties of wood and wood technology, basic joinery and interior/exterior finishing techniques. Corequisite(s): WOO9212 BSC9200 Building Science I This course presents building science principles related to heat, air, and moisture and helps students to understand the house as an integrated system. Students learn R2000-consistent building principles and explore the materials and detailing that support energy efficient, healthy house construction. Building envelope performance, including computer modelling and air tightness testing, together with the interpretation and application of the building code, are an integral part of this course. Prerequisite(s): DRA9260, MAT9261, WOO9212 and WOO9213 CON9300 Layout and Foundations Students are provided with the skills and knowledge needed to lay out a building lot using plot plans. Students learn to conduct differential levelling, establish and verify grades and locate building hubs using a variety of instruments. Students construct batter boards and formwork for footings. Walls, columns, piers and floors are also investigated. Prerequisite(s): DRA9260 and MAT9261 ENL9202 Communications II Course content includes writing instructions and writing for publication, creating relevant job-search correspondence and career portfolios, writing various informal reports to suit a specified purpose and writing and presenting a formal research report on a program related topic. Prerequisite(s): ENL9212 WOO9202 Advanced Building Techniques I Students develop the knowledge and skills required to construct high performance residential building envelopes. Skills developed include framing for resource and energy efficient homes; the construction of engineered floor and roof systems; installation of roof finishes, weather barriers, windows and exterior doors, air barriers, insulation and VDRs. Emphasis is placed on a systems approach to design and construction, teamwork, code compliance, plan reading, estimation and problem solving. Prerequisite(s): DRA9260, MAT9261, WOO9212 and WOO9213 WOO9203 Construction Carpentry III This course builds on carpentry skills and knowledge acquired in the program s first year. Students learn basic engineering principles to get the most from building construction materials and methods (Optimal Value Engineering OVE). Knowledge and skills developed include sizing and installing engineered wood products, advanced roof framing techniques such as irregular hips, dormers and unequal pitch roofs, and framing for and installing skylights. Projects are designed to emphasize: reading plans and span tables (proprietary and Building Code); problem solving and critical thinking. Prerequisite(s): DRA9260, MAT9261, WOO9212 and WOO9213 7
BSC9201 Building Science II Students explore green building principles and practices. Students learn about building design, materials, construction methods and technologies that promote energy efficient, environmentally responsible heal thy housing. Emphasis is placed on environmentally-responsible design, fit and finishes, environmental impact and life cycle assessment, renewable energy sources and indoor air quality. As a culminating project, students are required to design and specify an environmentally-responsible home. Prerequisite(s): BSC9200, WOO9202 and WOO9203 Corequisite(s): WOO9253 or CON9301 CON9143 Project Management Students learn the roles and responsibilities of personnel on a construction site. Students also learn about planning, scheduling, sub-contractors, inspections/permits, site documents and contracts. CON9301 Computer-Assisted Design and Estimating Students are provided with the skills and knowledge to use software to develop a better understanding of building design, construction and materials estimation. Students use software to accurately draw, model and estimate materials from framing to finishes for a variety of residential projects. Emphasis is placed on Building Code compliant, energy efficient designs that incorporate environmentally responsible, healthy house products and materials. Prerequisite(s): DRA9260 LFS9202 Integrated Project Students apply the principles and skills learned throughout the program on College approved and supervised projects. Prerequisite(s): CON9143 WOO9301 Advanced Building Techniques II Students gain the skills and knowledge required to select and install environmentally responsible exterior, and interior products and finishes. Skills developed include the installation of siding, interior and exterior trim, drywall and flooring. An emphasis is placed on teamwork, problem solving and critical thinking. Prerequisite(s): BSC9200 and WOO9202 WOO9302 Construction Carpentry IV Refining their carpentry skills, students gain an understanding of stair layout and construction, and advanced carpentry techniques, such as mortising, coping and scribing. In addition, students explore various innovative building construction techniques, such as insulated concrete forms, structural insulated panels, domes, modular construction, and modern post and beam assembly. An emphasis is placed on research, plan reading, precision layout, and joinery and problem solving. Prerequisite(s): BSC9200 and WOO9203 GED6785 General Education Elective Students choose one course, from a group of general education electives, which meets one of the following five theme requirements: Arts in Society, Civic Life, Social and Cultural Understanding, Personal Understanding, and Science and Technology. Equivalents: DSN2001, ENV0002, FAM1218, FIN2300, GED5200, GED5300, GEN1001, GEN1957, GEN2000, GEN2003, GEN2007, GEN2009, HIS0001, HIS2000, HOS2228, LIB1982, MGT7330, MVM8800, PSI1702, RAD2001, SOC2003, GED6022, GED5005, GED5002, GED5006, GED5004, GED1896, GED5009 or PSI0003 8