Oracle Change Management Pack Installation This guide contains instructions on how to install the Oracle Change Management Pack. IMPORTANT: Before installing Oracle Change Management Pack, please review the Install section in the Oracle Change Management Pack Readme, included on this CD-ROM. Oracle Change Management Pack Installation 1
This guide contains the following sections: Topic Hardware Requirements Software Requirements Components Installing Oracle Change Management Pack Removing Oracle Change Management Pack See Page 3 5 7 10 31 2 Oracle Change Management Pack Installation
Hardware Requirements Hardware Requirements Oracle Change Management Pack has the following hardware requirements: Disk Space 94 MB is required to install Oracle Change Management Pack and the Oracle Enterprise Manager Client. 136 MB is required to install Oracle Change Management Pack, the Oracle Enterprise Manager Client, and the Oracle Management Server. An additional 50-100 MB is recommended if the repository is running locally. Processor A Pentium 166 is required to run the Oracle Enterprise Manager Console and all management applications, but a 200 is recommended. A Pentium 200 is required if the Oracle Management Server is running locally. Oracle Change Management Pack Installation 3
Hardware Requirements Suggested RAM 128 MB is required for all Oracle Enterprise Manager components, the Oracle Change Management Pack, and the repository running locally. 64 MB is required for running the Oracle Management Server only. 64 MB is recommended for running only the console and management applications. 4 Oracle Change Management Pack Installation
Software Requirements Software Requirements Oracle Change Management Pack has the following software requirements: Operating System Requirements To run Oracle Change Management Pack and Oracle Enterprise Manager: Windows NT 4.0, Windows 95, or Windows 98 To run the Oracle Management Server: Windows NT 4.0 Oracle Database Requirements - Enterprise Edition Only Managed Databases Supported versions: 8.1.5, 8.0.x, and 7.3.x Repositories Supported versions: 8.1.5, 8.0.x, and 7.3.x Intelligent Agents/Data Gatherers Supported versions: 8.1.5, 8.0.x, and 7.3.x Oracle Change Management Pack Installation 5
Software Requirements Oracle Enterprise Manager Requirement Supported version: 2.0.4 (may be installed before or during installation of Oracle Change Management Pack) Web Browser Requirements for Oracle Enterprise Manager Console Microsoft Internet Explorer 4.x or Netscape 4.0.5+ Web Server Requirements for Oracle Enterprise Manager Console Oracle Application Server 4.0.7+, Xitami 2.3+, or IIS 4.0 JRE Requirement The Oracle Enterprise Manager Console and some Oracle Change Management Pack components require Java Runtime Environment (JRE), which is automatically installed with this CD-ROM installation. 6 Oracle Change Management Pack Installation
Components Components The following products can be installed with this CD-ROM installation: Oracle Products Release Oracle Change Management Pack 2.0.4 DB Search 2.0.4 DB Quick Change 2.0.4 DB Propagate 2.0.4 DB Diff 2.0.4 DB Capture 2.0.4 DB Alter 2.0.4 Plan Manager 2.0.4 Oracle Change Management Pack Documentation 2.0.4 Oracle Enterprise Manager 2.0.4 Oracle Enterprise Manager Documentation 2.0.4 Oracle Change Management Pack Installation 7
Components Oracle Products Release DBA Management Pack 2.0.4 SQL*Plus Worksheet 2.0.4 Storage Manager 2.0.4 Security Manager 2.0.4 Schema Manager 2.0.4 Instance Manager 2.0.4 Extended Database Administration 2.0.4 Replication Manager 2.0 Beta Oracle8i(tm) intermedia Text 2.0.4.1.0 Directory-Enabled Oracle Security Manager 1.0 Beta Oracle Parallel Server Manager 2.0.4 Oracle Launch Pad 1.0.1 Net8 Client 8.0.4.0.6A Repository Migration Wizard 2.0.4 8 Oracle Change Management Pack Installation
Components Oracle Products Release Oracle Universal Installer 1.6.0.7 Oracle Management Server 2.0.4 Oracle Applications Manager (English only) Oracle Applications Manager Server Extensions (English only) 1.0 Beta 1.0 Beta Oracle Enterprise Manager Web Site 2.0.4 Oracle Change Management Pack Installation 9
Installing Oracle Change Management Pack To install Oracle Change Management Pack, do the following: 1. Start Windows NT, Windows 95, or Windows 98. 2. Log on to your PC as a member of the Administrators group. 3. Insert the Oracle Change Management Pack CD-ROM into the CD-ROM drive. 4. The Oracle Enterprise Manager Change Management Pack Autorun window appears with the following options: Begin Installation Explore CD Quick Tour Click Begin Installation. 10 Oracle Change Management Pack Installation
5. The Oracle Universal Installer Welcome window appears. Click the Next button to continue. Oracle Change Management Pack Installation 11
6. The File Locations window appears. 12 Oracle Change Management Pack Installation
Do not change the information in the Path field in the Source section. The Path field contains the full path of the products.jar file from which the Oracle Change Management Pack components will be installed. 7. In the Name field in the Destination section, type the name of the Oracle home where you would like Oracle Change Management Pack to be installed, or select it from the dropdown list, for example: If you currently do not have a home created, one will be created for you during installation, giving the home whatever name you enter here. This home will be located in whatever drive you select in the next step. Oracle Change Management Pack Installation 13
Please read the following guidelines regarding Oracle homes: Make sure you install Oracle Change Management Pack in the same home as Oracle Enterprise Manager and the Oracle Enterprise Manager Migration Assistant, but in a different home than the Oracle database. On your machine, the Oracle Enterprise Manager Migration Assistant is only installed once - in the home where Oracle Enterprise Manager is first installed - regardless of how many homes contain installs of Oracle Enterprise Manager (assuming you do not de-select it from a Custom install). If you are installing Oracle Enterprise Manager, do not install it in the same home as another version of Oracle Enterprise Manager. If you are installing the Agent Extensions (which enable the paging functionality and the management of Oracle Applications) install them in the same Oracle home as the Intelligent Agent. 14 Oracle Change Management Pack Installation
IMPORTANT: Make sure that the Oracle home name: is 1 to 16 characters long includes only alphanumeric characters and underscores does not contain any spaces 8. In the Path field in the Destination section, type the proper path to the Oracle home, or select it from the drop-down list, for example: If the path that you type does not currently exist, it will be created for you during installation. Do not leave any fields in the File Locations window empty. Oracle Change Management Pack Installation 15
Click Next to continue. 9. The Available Products window appears. 16 Oracle Change Management Pack Installation
Select one of the following product options to install: Oracle Change Management Pack, Oracle Enterprise Manager Client (if this version is not already on your machine), and dependent sub-components Oracle Change Management Pack, Oracle Management Server, the Oracle Enterprise Manager Client, and dependent sub-components (This option is for Windows NT only.) Agent Extensions (which enable the paging functionality and the management of Oracle Applications) and dependent sub-components (This option is for Windows NT only.) Make your selection and click Next to continue. If you selected Agent Extensions, go to step 11. Also, refer to the section Configuring and Starting the Paging Service for NT in Chapter 6 of the Oracle Enterprise Manager Configuration Guide. Otherwise, continue to step 10. Oracle Change Management Pack Installation 17
10. The Installation Types window appears. 18 Oracle Change Management Pack Installation
Select either a Typical install or a Custom install. A Typical install installs the product(s) you selected and its default components. A Custom install allows you to select the specific components you wish to install as part of the product(s) you selected. Click Next to continue. If you selected atypical install, go to step 12. If you selected a Custom install, continue to step 11. Oracle Change Management Pack Installation 19
11. The Available Product Components window appears. 20 Oracle Change Management Pack Installation
This window lists components that will be installed with the product(s) you are installing. Uncheck only those items you wish to deinstall or do not wish to install. If you uncheck an item that is already installed, it will be deinstalled. For example, if the Oracle Enterprise Manager Client is already installed, de-selecting it here will cause it to deinstall. If you are installing the Agent Extensions, only two components will be listed: Paging Service Agent Extensions and Applications Management Agent Extensions. When you are satisfied with the components that will be installed, click Next to continue. If you are installing the Agent Extensions, go to step 15. Otherwise, continue to step 12. Oracle Change Management Pack Installation 21
12. If certain Oracle Enterprise Manager/Change Management Pack components have not previously been installed on your machine, the Component Locations window appears. If this window does not appear, skip this step and go to step 13. 22 Oracle Change Management Pack Installation
If the Component Locations window does appear, you can use it to see where each component is to be installed, select alternate locations for some of the components, and check for available disk drive space. To show a list of all the components to be installed, check the Show all Components to be Installed box. To see if a component s location can be changed, and to see where a component is to be installed, click on a component in the list. If the component s location can be changed, a white box appears below where you can type the new location. You can also browse for new locations using the Change Location button. To check for available space on your different disk drives, select the arrow in the Available Disk Space field. If you are satisfied with the location of all the components, click Next to continue. 13. If this is a Typical install, go to step 15. If this is a Custom install and you are not installing the Oracle Management Server, go to step 15. Oracle Change Management Pack Installation 23
If this is a Custom install and you are installing the Oracle Management Server, continue to step 14. 14. The Server Repository window appears. 24 Oracle Change Management Pack Installation
Select one of the following options: Installing Oracle Change Management Pack The Management Server will use an existing repository. The Management Server will require a new repository. A repository is a set of tables in an Oracle database and can be located in any Oracle database with a connection to the Oracle Management Server. Make your selection and click Next to continue. If you are installing Oracle Applications Manager, the Important Configuration Information window appears. Before continuing, follow the directions in this window regarding manually registering Oracle Applications Manager with the Oracle Management Server. Oracle Change Management Pack Installation 25
15. The Summary window appears showing an outline of the installation. Click Install. 26 Oracle Change Management Pack Installation
16. The Install window appears showing the status of the installation. Oracle Change Management Pack Installation 27
17. If you are running the Oracle Management Server from this machine, the Configuration Tools window appears at the end of the installation. 28 Oracle Change Management Pack Installation
The Oracle Configuration Assistant automatically runs at this time. For instructions on how to use the Oracle Configuration Assistant and how to create and load your repository, see the Oracle Enterprise Manager Configuration Guide. When the Oracle Configuration Assistant has been successfully run, click Next to continue. 18. The End of Installation window appears. If you would like to read the Oracle Change Management Pack Readme at this time, click Release Info. To exit the Oracle Universal Installer, click Exit. If you are running Windows 95 or Windows 98, restart your machine before running the products you installed. Rebooting resets the path for the JRE. In order for Oracle Change Management Pack, Oracle Enterprise Manager, and all components to run successfully, they must be correctly configured. Please see the Oracle Enterprise Manager Configuration Guide for instructions on Oracle Change Management Pack Installation 29
starting and configuring Oracle Change Management Pack and Oracle Enterprise Manager. IMPORTANT: If you are migrating a previous version of the Oracle Change Management Pack repository to this version, please see the Oracle Enterprise Manager Configuration Guide for instructions on how to use the Migration Assistant for this task. The Change Management repository migration must be performed BEFORE you create any change plans or baselines in the Oracle Management Server. 30 Oracle Change Management Pack Installation
Removing Oracle Change Management Pack Removing Oracle Change Management Pack To remove this and other Oracle products, do the following: 1. Stop all Oracle services. 2. Start the Oracle Universal Installer from: the Start menu or the CD-ROM by selecting Explore CD from the Autorun window and then selecting the Setup icon. 3. Click the Deinstall Products button in the Welcome window. 4. The Inventory window appears. Select the product(s) you want to remove and click the Remove button. 5. Another window appears, asking if you want to remove the products and their dependent component(s). Click the Yes button. 6. The Oracle Universal Installer warns you of any product dependencies that might cause problems if particular Oracle Change Management Pack Installation 31
Removing Oracle Change Management Pack products are removed, and prompts you to confirm the deinstallation. 32 Oracle Change Management Pack Installation