LinkPlus Interface Guide



Similar documents
LinkPlus Interface Guide

LinkPlus Interface Guide

LinkPlus Interface Guide

SpectraLink 6300 MCU. T1 Remote Module Installation. SpectraLink 6000 System. November 2013 Edition Version M

Avaya 1616/1616-I IP Deskphone User Guide

Avaya 1608/1608-I IP Deskphone User Guide

Avaya 9400 Series Digital Deskphone User Guide for Avaya Aura Communication Manager

USER GUIDE. Cisco Small Business Pro. SPA 500 Series IP Phones Models 504G, 508G, and 509G. Provided by

How To Use Avaya For Free

For customers in AL, FL, GA, KS, SC, TN. wowforbusiness.com MATRIX USER GUIDE. For Cisco SPA504 & SPA509 IP Phones MGCP.U.1304.O

4690 IP Conference Telephone. Release 2.0 User s Guide

Avaya one-x Deskphone Edition for 9620 IP Telephone User Guide

Avaya one-x Deskphone Edition for 9640 IP Telephone User Guide

How To Use A Cisco Phone With A Cell Phone On A Small Business Ip Phone (Pa300) Or A Small Cell Phone (Ppa500) With A Microsoft Ip Phone (Spa500) On A Business Plan (Small Business)

IP Office Phone User Guide Issue 04a - (16 January 2015)

TABLE OF CONTENTS TABLE OF CONTENTS. 1. Introduction:

Avaya one-x Deskphone Edition for 9630/9630G IP Telephone User Guide

Cisco SPA 500 Series IP Phones

USER GUIDE. Cisco Small Business Pro. SPA 504G IP Phone for 8x8 Virtual Office

Cisco SPA300 Series and SPA500 Series IP Phones with Cisco Unified Communications UC320W

Avaya 9650 IP Telephone End User Guide

User Guide for the Polycom SoundStation IP 6000 Phone

How To Use An Ip Phone On A Cell Phone On An Ipphone On A Sim Sim Sim (Cisco) Or Ip Phone (Ip Phone) On A Iphone Or Ipphone (Ipphone) On An Iphon Or Ip

User Guide for Cisco Unified IP Phones 7961G and 7941G

Avaya 9608 IP Phone Quick Reference User Guide

USER GUIDE Cisco Small Business

VCX Business Telephone Guide

Polycom Conference Phone Quick Reference Guide ACC-1144 PUG

How To Use A 9608 Phone On A Cell Phone On Sim Sims 2 (Satellite) On A Sims 3 (Cell Phone) On An Iphone Or Ipad Or Ipa 2 (Cellphone) On Sims 4

VCX Telephone Guide. Telephones 3102 Business Telephone 2102 Business Telephone 3101 Basic Telephone 2101 Basic Telephone

OfficeSuite Mitel IP Phone User Reference Guide Release 4.1

Cisco IP 7961 Telephone & Unity Voic User s Guide

DP 5000 Series Telephone Button Overview.

Polycom SoundPoint IP 550

AVAYA 9608 & 9611G IP DESKPHONE INSTRUCTIONS

IP Office Essential Edition IP Office Essential Edition - Quick Version Phone Based Administration

How To Use A Mitel 5340 Ip Phone

Polycom SoundPoint IP 650

Polycom 2-Line Desk Phone Quick Reference Guide

MITEL IP PHONE USER REFERENCE GUIDE Release 4.0

Toshiba Business Phones Quick Reference Guide

Ipiphony Phone System. User Manual. 1 P a g e

USER GUIDE. Cisco Small Business. SPA 303 IP Phone for 8x8 Virtual Office

Unified Communications

Cisco Unified IP Phone 6945 User Guide for Cisco Unified Communications Manager Express Version 8.8 (SCCP)

User Guide for the Polycom SoundStation IP 6000 Phone

Cisco IP Phones User Guides

Mitel IP Phone User Reference Guide Release 5.0

USER GUIDE Cisco Small Business

IP Office Basic Edition IP Office Basic Edition - Quick Mode Phone Based Administration

Optus VoIP IP Handset Quick Start Guide.

USER GUIDE Cisco Small Business

Features of Your Cisco Unified IP Phone

How To Use An Ip Phone On A Cell Phone On An Ip Cell Phone

NBX 1102 Business Telephone NBX 2102 Business Telephone NBX 2102-IR Business Telephone NBX 2101 Basic Telephone

Using the Cisco IP Phone 7940/7960

CISCO SMALL BUSINESS PRO IP PHONE

Polycom SoundPoint IP 600 SIP 1.5

Avaya one-x Deskphone Edition for 9630/9630G IP Telephone User Guide

Featuring the Vertical Xcelerator IP Phone System DESK PHONE USER GUIDE V1.5

USER GUIDE Cisco Small Business

AVAYA 9608/9611G SIP DESKPHONE INSTRUCTIONS

Setting up & using your IP Telephone

Optus VoIP IP Handset Quick Start Guide.

OfficeSuite Cloud-Based Phone System Mitel IP Phone User Reference Guide Release 5.0 Final

USER GUIDE Cisco Small Business

ABBREVIATED DIALING (AD)

Aastra 480i Broadsoft SIP VoIP Telephone User s Guide

Napa Valley College Cisco Telephone User Guide

Configuring Avaya Distributed Office For Key System Features including Outside Line Groups, Voice Announce, and Busy Indication and Transfer Issue 1.

silhouette Cloud-Based Phone System Mitel IP Phone User Reference Guide Release 5.0 Final

Cisco 504 IP Phone. Quick User guide. Produced by: The Nomis Support Desk.

TABLE: The 2420 Telephone Components

Avaya one-x Deskphone Edition 9620 IP Telephone User Guide for University of North Dakota users

IP Office Basic Edition IP Office Basic Edition - Quick Mode 1400 Series Phone User Guide

Overview of IP Phone. 1 Handset Pick up to place or answer a call. 2 Message Waiting Indicator

Carrier VoIP Nortel IP Phone 2004 User Guide (CICM) Release: CICM 10.1 Document Revision: NN

Four-Line Small Business System Speakerphone 945

NetLink e340/i640 Wireless Telephone Cisco CallManager and IP Phone 7960 Emulation. Configuration and Administration. Part Number: Issue G

3102 Business Telephone Guide for 3Com Asterisk. Part Number Rev AB Published January

IP Phone 7941/7961 User Manual

IP Phone 1140E User Guide. BCM Business Communications Manager

NITSUKO DS01 TELEPHONE USER S GUIDE

Model No. KX-TGP500. Model No. KX-TGP550

DEFINITY Enterprise Communications 6408D Plus Telephone User s Guide

9608/9611 IP Phone User Guide

How To Program A Talkswitch Phone On A Cell Phone On An Ip Phone On Your Ip Phone (For A Sim Sim) On A Pc Or Ip Phone For A Sim Phone On Iphone Or Ipro (For An Ipro) On

Four-Line Intercom Speakerphone 944

Aastra 673xi / 675xi. Telephony with SIP Phones at the Aastra 800/OpenCom 100 Communications System User Guide

Cisco SPA 525G. Quick Start guide. Business

Cisco Unified IP Phone 6921

Avaya Campus PBX MICHIGAN STATE UNIVERSITY. Telecommunication Systems. Avaya 2410 User Guide

Model No. KX-TGP500. Model No. KX-TGP550

Model SPA 303G Quick Start Guide

VoIP User Guide. Polycom IP331 Handset. Polycom IP331 Handset 1

7971 Basic Phone Overview

IP Office and 5402 User Guide

User s Guide for Polycom SoundStructure Systems and the Polycom Touch Control Device

eircom advantage IP Professional phone user guide

Transcription:

Avaya DEFINITY Communications System LinkPlus Interface Guide SpectraLink 6000 System SpectraLink 8000 System July 2008 Edition 1725-36130-001 Version E

LinkPlus Interface Guide: Avaya DEFINITY Communications System Trademark Information Polycom and the logo designs SpectraLink LinkPlus Link NetLink SVP Are trademarks and registered trademarks of Polycom, Inc. in the United States of America and various countries. All other trademarks used herein are the property of their respective owners. Patent Information The accompanying product is protected by one or more US and foreign patents and/or pending patent applications held by Polycom, Inc. Copyright Notice Copyright 1998 to 2008 Polycom, Inc. All rights reserved under the International and pan-american copyright Conventions. No part of this manual, or the software described herein, may be reproduced or transmitted in any form or by any means, or translated into another language or format, in whole or in part, without the express written permission of Polycom, Inc. Do not remove (or allow any third party to remove) any product identification, copyright or other notices. Every effort has been made to ensure that the information in this document is accurate. Polycom, Inc. is not responsible for printing or clerical errors. Information in this document is subject to change without notice and does not represent a commitment on the part of Polycom, Inc. Notice Polycom, Inc. has prepared this document for use by Polycom personnel and customers. The drawings and specifications contained herein are the property of Polycom and shall be neither reproduced in whole or in part without the prior written approval of Polycom, nor be implied to grant any license to make, use, or sell equipment manufactured in accordance herewith. Polycom reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Polycom to determine whether any such changes have been made. No representation or other affirmation of fact contained in this document including but not limited to statements regarding capacity, response-time performance, suitability for use, or performance of products described herein shall be deemed to be a warranty by Polycom for any purpose, or give rise to any liability of Polycom whatsoever. Contact Information Please contact your Polycom Authorized Reseller for assistance. Polycom, Inc. 4750 Willow Road, Pleasanton, CA 94588 http://www.polycom.com 2 PN: 1725-36130-001_E.doc

About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our LinkPlus digital integration technology to integrate with various digital switch platforms. Using LinkPlus technology, Wireless Telephones (handsets) emulate digital telephone sets to deliver advanced capabilities such as multiple line appearances and LCD display features. This document explains the programming or administration required to use the host digital switch with the following Polycom products: SpectraLink 6000 System SpectraLink 6300 MCU The SpectraLink 6300 MCU supports up to 3,200 handsets and up to 1,000 Base Stations. Up to 25 shelves can be interconnected for maximum system capacity. SpectraLink 6000 System SpectraLink 6100 MCU Designed for smaller installations supporting up to 64 handsets and up to 16 Base Stations. Up to four MCU controllers can be interconnected for maximum system capacity. SpectraLink 8000 Telephony Gateway The SpectraLink 8000 Telephony Gateway is a wireless LAN-based telephony product that provides high quality packetized voice communications using the Internet Protocol (IP). Different models of SpectraLink Wireless Telephones vary in functional capabilities. This document covers the basic operational features of all handsets. However, certain handset or PBX features may not be supported by your emulation. PN: 1725-36130-001_E.doc 3

LinkPlus Interface Guide: Avaya DEFINITY Communications System Related Documents SpectraLink 6300 MCU : Operator s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (1725-36092-001) Available at http://www.polycom.com/usa/en/support/voice/proprietary_wire less/proprietary_wireless.html SpectraLink 8000 Telephony Gateway: Administration Guide for SRP (1725-36028-001) SpectraLink 8020/8030 Wireless Telephone and Accessories User Guide (1725-36023-001) SpectraLink e340/h340/i640 Wireless Telephone: Configuration and Administration (SRP) (72-1065-09) Available at http://www.polycom.com/usa/en/support/voice/wi-fi/wi-fi.html Telephone Switch Interface Matrix (1725-36128-001) Available at http://www.polycom.com/usa/en/support/voice/wifi/pbx_integration.html Customer Support Polycom wants you to have a successful installation. If you have questions please contact the Customer Support Hotline at (800) 775-5330. The hotline is open Monday through Friday, 6 a.m. to 6 p.m. Mountain time. For Technical Support: technicalsupport@polycom.com For Knowledge Base: http://www.polycom.com/usa/en/support/voice/voice.html 4 PN: 1725-36130-001_E.doc

About this Guide Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or button on SpectraLink hardware. PN: 1725-36130-001_E.doc 5

1 Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programming can be done after the handsets are registered. Recommended programming includes assigning extension numbers to the handsets and programming features on the telephone system so they are easily accessible from the handsets. For analog interfaces, macro codes are in the document relating to configuring the system. See SpectraLink 6300 MCU: Operator s Console, SpectraLink 6100 MCU: Installation and Operation, or SpectraLink 8000 Telephony Gateway: Administration Guide for SRP. The following information will help the system administrator set up the SpectraLink 8000 Wireless Telephones to operate in a way that feels familiar and comfortable to users. Plan Programming Digital Interface programming for the Wireless Telephone System will be faster if it is planned in advance by verifying the parameters and features on the current telephone system and wired phones. The system administrator must assign extension numbers to the handsets and plan the functions (trunk access, toll restrictions, system features, ringing options etc.) to be programmed for the handsets. One of these scenarios concerning how the handsets are programmed should apply to this site: All handsets are programmed alike: All handsets will be programmed exactly the same. Depending on the capabilities of the switch, the system administrator can often program one handset and use it as a model for all other handsets. Groups of handsets are programmed alike: Handsets are grouped into classes that are programmed alike. Depending on the capabilities of the switch, the system administrator can program PN: 1725-36130-001_E.doc 7

LinkPlus Interface Guide: Avaya DEFINITY Communications System model handsets then use the model as a template to program the other handsets. All handsets are different: All handsets are programmed differently, so each handset will be programmed individually. Before installation, the parameters of the wired phones should be verified to plan the parameters required for the handsets. Line assignment The handset supports up to nine line resources. Which lines should ring at this handset (Bridged Call Alerting) and which lines will be selected when the user goes off-hook (Idle or Alerting Appearance Preference)? Call appearances Should this extension number appear on any other telephone (bridged appearance)? On which sets should it ring (bridged call alerting)? Class of Service To which Class of Service should handsets be assigned? Coverage Where is this extension forwarded on busy/no answer? Call pickup group To which group does this extension or group of extensions belong? Toll restrictions To which Class of Restriction group should the handsets be assigned? Programmable buttons Ten programmable buttons are available for lines or features. Determine which features, if any, should be programmed on the handsets. These assignments may emulate assignments on the user's wired set. 8 PN: 1725-36130-001_E.doc

Plan the Interface It will help to identify a wired set that is programmed exactly or close to the way the handsets should be programmed. This set can be duplicated to copy station parameters to the handsets. Assign Extension Numbers The wire contractor should inform the system administrator which port numbers have been designated for the handsets. The system administrator may use the Extension Assignments Worksheet at the end of this document to track the port numbers, extensions, users, and features assigned to handsets. The Wireless Telephone Display The SpectraLink Wireless Telephone will display the telephone number as it is dialed. Certain characters may be used by the system that are not implemented in the handset. Flashing characters are not implemented on the handset, nor is rolling or scrolling of text. Although some desksets do not have a display, any display information sent by the system will be displayed on the handset. Handset indicators Line indicators are associated with line access keys. Status indicators or icons are associated with voicemail, low battery function, other functions, and service interruption. A left or right arrow is displayed when the screen can be toggled either left or right to display more characters. PN: 1725-36130-001_E.doc 9

LinkPlus Interface Guide: Avaya DEFINITY Communications System When lines are programmed as shown on the key-map diagrams, the numeral icons on the handset display will be mapped to any deskset LEDs associated with the corresponding feature keys. The line icons will be displayed as follows: Line State On-hook Off-hook Ringing On hold Handset Line Status Icon State Off On Fast flash Slow flash Feature Programming Requirements When planning the interface, the following information must be taken into account: Line sequences The handset uses two types of key sequences to access PBX features and multiple lines. Line sequences are those where the user presses the LINE key and then a number key. The key-map design designates line keys that should be programmed for line appearance so that they correspond to line sequences on the handset. The line icon on the handset will reflect activity on the corresponding deskset key. For this reason, it is recommended that line appearance keys be used only for line access. If only one line is assigned to a particular handset, leave the other designated line keys identified on the key maps unassigned. The corresponding handset LINE + key sequences will then have no function. Function sequences Function sequences are those where the handset user presses the FCN key and then a number key. Designated function deskset keys programmed to system features such as Transfer and Conference may have their corresponding menu items display on the handset function menu. See the key-map diagram for the function keys that are available for feature programming. 10 PN: 1725-36130-001_E.doc

Plan the Interface Function Menu Programming SpectraLink 6300 MCU Note that the function menu defaults set for the handsets associated with the SpectraLink 6300 MCU can be changed via the SpectraLink Operator s Console. If the system uses softkeys, to minimize unwanted interaction between system display and the handset function menu display, configure the handset menu to include a delay of one function key. The user will then have to press FCN twice before the handset menu displays, allowing the first press of the FCN key to access softkey functions. See SpectraLink 6300 MCU: Operator s Console for further procedural information. Another option may be to disable the softkey menu at the system and exclusively use the SpectraLink menu. This would remove any unwanted interaction, but may restrict the number of available features to the number of programmable keys on the handset. SpectraLink 6100 MCU For the SpectraLink 6100 MCU, the handset function menu can only be changed via remote configuration through the services of Polycom Customer Support. SpectraLink 8000 Telephony Gateways Menu options can be changed in the Administration Console of the SpectraLink 8000 Telephony Gateways. The Delay function is used when the PBX uses softkeys. With Delay, when the FCN key is pressed, the handset displays the features that are associated with the softkeys so that one of these features can be selected first. If Delay is programmed, pressing the FCN key twice will bring up the menus immediately. Under the menu programming section of the Administration console there is an option to use Delay (same as the SpectraLink 6300 MCU). See your handset s Configuration and Administration document for further details. Also refer to the SpectraLink 8000 Telephony Gateway: Administration Guide for SRP document for details on configuring the telephone switch type. PN: 1725-36130-001_E.doc 11

LinkPlus Interface Guide: Avaya DEFINITY Communications System Hold The Hold feature should be programmed to the HOLD key as shown on the Key-map Diagrams so that when the HOLD key or softkey is pressed on the handset, the call is placed on hold. Mute The handset Mute function is hard-coded on the PTB 4xx handset to FCN+1. This function sequence is recommended, but the system administrator can assign the Mute function to any available function key sequence or leave the function unassigned. The SpectraLink 6000 and SpectraLink 8020/8030 Wireless Telephones use a Mute softkey. Voicemail The message-waiting icon on the handset is activated with the message indication of the deskset. The voice mail feature on the deskset must be assigned to the feature key as shown in the Key-map Diagrams. Do not assign any other feature to this key, since the associated LED is directly mapped to the message-waiting icon on the handset. This LED assignment must be used in order to support the message-waiting icon. Using this key for any other feature or for line access could cause unacceptable system performance. Speakerphone If a handset such s the PTB 4xx has no speaker, speakerphone function and functions that require the use of the volume keys will not be made available on the handset. Ring types Handset ring types (soft, normal, vibrate, etc.) are programmed by the handset user and are not accessible or changeable by the system switch. Whenever possible the audible ringer on the handset will follow the cadence provided by the system switch. Call progress tones provided by the host system will be passed through to the handset. 12 PN: 1725-36130-001_E.doc

2 Interface Implementation This section describes the recommended programming to use the SpectraLink 6000 System with a DEFINITY Communications System. The procedures assume: The DEFINITY system is installed and operational in an approved configuration. See the Telephone Switch Interface Matrix document for tested configurations. A trained DEFINITY technician will be on site with the Installer to program the system. The SpectraLink 6000 System or SpectraLink 8000 Telephony Gateway is installed and the handsets are available for programming. PN: 1725-36130-001_E.doc 13

LinkPlus Interface Guide: Avaya DEFINITY Communications System DEFINITY Four-Wire Interface The DEFINITY TN754B (any vintage) or TN754 (vintage 11 or higher) circuit pack provides eight, four-wire digital station circuits. Two of these wires are used for transmit, two are used for receive. Typically the stations are wired to a block or to a patch panel. From the block or patch panel the stations are wired to a modular jack. The jack can connect to a short patch cord that connects to the MCU. The following table shows the Avaya side of the block or patch panel wiring. Pair Function 1 2 Receive Station 1 3 Transmit Station 1 4 5 Receive Station 2 6 Transmit Station 2 7 8 Receive Station 3 9 Transmit Station 3 10 11 Receive Station 4 12 Transmit Station 4 13 14 Receive Station 5 15 Transmit Station 5 16 17 Receive Station 6 18 Transmit Station 6 19 20 Receive Station 7 21 Transmit Station 7 22 23 Receive Station 8 24 Transmit Station 8 25 14 PN: 1725-36130-001_E.doc

Interface Implementation See the documentation for your SpectraLink components for more information about wiring the demarc block or patch panel. The following table shows the patch cord pinout for the Avaya side of the modular 8-pin (RJ45) connector. Pin Function 1 Receive 2 Receive 3 Transmit 6 Transmit Each digital pair is polarity insensitive. If you reverse polarity the system will still work. Set the Switch Interface Type SpectraLink 6100 MCU The SpectraLink 6100 Master Control Unit (MCU) requires the switch interface type to be configured using the front panel buttons. The configuration procedures are detailed in the SpectraLink 6100 MCU: Installation and Operation document. SpectraLink 6300 MCU When configuring the SpectraLink 6300 MCU, the PBX interfaces are available as sub-menu selections when defining the Interface Module type using the SpectraLink 6300 MCU Operator s Console. Refer to the SpectraLink 6300 MCU: Operator s Console document for details on configuring the Interface Modules. SpectraLink 8000 Telephony Gateways Connect to the SpectraLink 8000 Telephony Gateway using the serial or modem interface. From the Main Menu, choose Gateway Configuration. Scroll to Telephone Switch Type and press enter to change this field, from the Submenu of PBX types, select DEFINITY. Refer to the SpectraLink 8000 Telephony Gateway: Administration Guide for SRP document for details on configuring the Telephone Switch Type. PN: 1725-36130-001_E.doc 15

LinkPlus Interface Guide: Avaya DEFINITY Communications System Key-mapping the Handset to Emulate 8410D Functionality Programmable buttons on Page 2 of the station form can be assigned as determined in the pre-installation procedures. The following diagram shows how the 8410D buttons map to the handset. FCN*1 FCN*2 FCN*3 FCN*4 FCN*5 FCN*6 FCN*7 FCN*8 Menu EXIT PREV NEXT LINE 1 LINE 2 LINE 3 LINE 4 LINE 5 LINE 6 FCN 5 LND FCN 6 ABDIAL FCN 7 VMAIL FCN 8 CALLBK FCN 2 XFER FCN 3 CONF FCN 1 MUTE FCN 4 DROP HOLD DEFINITY 8410D Key-mapping The FCN [number] and LINE [number] labels represent the key sequence on the handset mapped to the corresponding key on the desk set. The FCN * sequence is used to map to softkeys. Pressing the FCN key on the handset followed by the * key and the [number] key 16 PN: 1725-36130-001_E.doc

Interface Implementation is the sequence equivalent to pressing the corresponding softkey on the desk set. The handset function menu default settings are shown on each corresponding button in the above diagram; these may be changed as described above in Function Menu Programming. Some of these functions (Mute, Redial, Forward, etc.) are activated by softkeys or FCN menu options on the SpectraLink 6000 and SpectraLink 8020/8030 Wireless Telephones. FCN + 1 MUTE FCN + 2 XFER FCN + 3 CONF FCN + 4 DROP FCN + 5 LND FCN + 6 ABDIAL FCN + 7 VMAIL FCN + 8 CALLBK FCN + 9 EXIT MENUS Program DEFINITY Each handset must be administered on the DEFINITY so the switch will recognize the handset and allow access to system facilities and features. The DEFINITY technician or local system programmer should perform the necessary programming. Save translations Before beginning to program the system, the technician may want to back up the current programming with the save translations command. This will take time, but will ensure that translations can be restored if necessary. Program Handsets Copy settings from a wired set The easiest way to program the SpectraLink Wireless Telephone on DEFINITY is to find a wired 8410D station that has settings and restrictions similar to what is required for the handset, and use the duplicate station command to copy those settings to a template handset. If there is no 8410D available, find a station that has similar settings, and use the display or print station command to check the PN: 1725-36130-001_E.doc 17

LinkPlus Interface Guide: Avaya DEFINITY Communications System settings so they can be manually duplicated using an add station command for the template handset. Station features for handset Station features on Page 1 of the station form can be assigned or copied as determined in the pre-installation procedures. The following settings must be set for the handset: Type: 8410D Name: the handset user's name, if there is a permanent user assigned. Auto Answer: None (this is the default, and forces calls to ring the handset) Notes for users The following features are not supported on the PTB 4xx handset: Personalized Ring feature The 8410's SHIFT, TEST, and SPEAKR keys The 8410's red programmable button lamps The handset display has only 16 characters per line; longer messages will wrap onto the second line of the display. DEFINITY s fivecharacter menu names (for example, CpkUp for Call Pickup) will be truncated to three characters on the handset. If the customer wants to change these three-character messages, they can be customized using DEFINITY s Language Translations feature. Assign buttons The technician can assign Call Appearances, Line (trunk) Appearances, and features to buttons to fit user needs. If the handset will be used in conjunction with a wired station, administer the handset as a Bridged Appearance of the wired station. Assign buttons 1-3 as bridged appearances (brdg-appr) of the wired station. This will allow the first three appearances on the handset to correspond to the first three appearances on the wired station. Assign buttons 4-5 as call appearances (call-appr). This must be done because DEFINITY requires at least two call appearances of the extension on each station. 18 PN: 1725-36130-001_E.doc

Interface Implementation To make the handset ring when the wired station rings, change Bridged Call Alerting to Yes on the wired station. If the handset is not a bridged appearance of a wired station, assign buttons 1-3 as call appearances (call-appr). Duplicate programming After the model handset or phones have been completely programmed, use the duplicate station command to copy the programming to all like handsets. Change the extension of the bridged appearance on each set as it is copied. The installer can now test the handsets. PN: 1725-36130-001_E.doc 19

3 Extension Assignments Worksheet Shelf: Interface Module: Handset # Ext. # Name Interface Module Circuit # Handset 1 1 Handset 2 2 Handset 3 3 Handset 4 4 Handset 5 5 Handset 6 6 Handset 7 7 Handset 8 8 Handset 9 9 Handset 10 10 Handset 11 11 Handset 12 12 Handset 13 13 Handset 14 14 Handset 15 15 Handset 16 16 Comment Handset Serial # PN: 1725-36130-001_E.doc 21