PRODUCT INFORMATION oticon ALtA PRo oticon ALtA Oticon Alta is built on the Inium platform and is our best performing hearing solution with our most advanced technologies. The audiology in Alta provides its users premium listening performance and allows to factoring in individual listening preferences and needs of each client. The Alta family styles range from compact In-the-Ear styles to a broad palette of Behind-the-Ear styles. The style range include the new wireless Invisible-Inthe-Canal (IIC), Completely-In-the-Canal (CIC) and the new designrite for users looking for ultimate discretion. The RITE instruments use Oticon s minifit receivers and the BTE instruments use the new Corda minifit thin tubes, allowing sharing the minifit soft domes and custom ear pieces. FITTING RANGE HL - 0 125 2 0 1k 2k 4k 8k Hz Oticon Alta can be fitted to users with mild to severe-to-profound hearing losses. Speech Guard E Speech Guard is a signal processing system that preserves speech dynamics and speech patterns as these are important and essential information to the auditory system. Speech Guard E is optimised to better line up with the dynamic range of speech to preserve more of the speech cues. Speech Guard E maintains audibility, prevents discomfort and safeguards speech envelopes by combining the advantages of both fast and slow acting compression. YouMatic Premium YouMatic is a personal automatic system programmed to the client s individual needs and sound preferences. YouMatic controls the sound processing across multiple environments by adjusting the response, directionality, noise management, transient management and compression. Inium feedback shield Inium feedback shield is an effective feedback protection system implemented on the Oticon Inium platform. Inium feedback shield is a hybrid system combining two anti-feedback principles to both prevent and suppress feedback without superimposing artefacts onto the signal quality or sacrificing audibility. Based on the environment, the system deploys the best combination of real time phase inversion and frequency shift to deliver great sound quality at all times. Family Features Speech Guard E Spatial Sound Premium YouMatic Premium Binaural Processing Binaural Synchronisation Binaural PB Coordination Spatial Noise Management Fitting Bandwidth khz Inium feedback shield Free Focus Premium Artificial Intelligence Premium [+] Learning Memory T-coil AutoPhone Program Power Bass (streaming) Music Widening (streaming) TriState Noise Management Transient Management Multi-band Adaptive ectionality Voice Aligned Compression (VAC) NAL-NL1, NAL-NL2 and DSL v5.0a m[i/o] Flexible minifit receiver system ConnectLine and Remote Control DAI input and FM option In-situ audiometry (Genie) INIUM WIRELESS
PRODUCT OVERVIEW CUSTOM STYLES RITE STYLES BTE STYLES 8 HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz HL - 0 125 2 0 1k 2k 4k 8k Hz Mould Bass & Power dome Open dome Custom mould Corda minifit OSPL (peak) Ear simulator 119 126 1 135 2cc coupler 9 117 121 127 (peak) Ear simulator 49 59 64 71 2cc coupler 38 54 62 127 115 127 132 131 126 135 117 5 118 124 121 117 126 62 46 65 66 62 61 68 53 35 55 57 53 51 IIC CIC ITC ITE - Half Shell ITE - Full Shell Battery size 312 13 Fitting levels Battery life (h)* 75-135 1-2 Wireless ** ectional Program control *** Volume control *** Telecoil AutoPhone Connectline compatible FM compatible Programming interface, cable #3 FlexConnect Mini FlexConnect Mini FlexConnect Mini designrite minirite RITE minibte BTE13 312 312 312 13 8 65-75 115-1 85-1 Cable #3 directly FlexConnect Programming shoe Cable #3 directly Programming shoe CUSTOM STYLES Wax protection Receiver in all instruments ProWax Microphone in battery instruments Microphone in 312 and 13 battery instruments Instruments with 312 battery may be produced with horizontal battery drawer depending on ear geometry. Oticon optimises fitting level and venting by default according to hearing loss, requested instrument style, and ear geometry. T-Cap O-Cap Default Option * Real usage battery life is shown as an estimated interval based on measurements with variable amplification settings and variable input levels. ** IIC is only available in Alta Pro *** Option available for CIC only Accessories Type/info Use with Tamper resistant battery drawer Available in 7 colours minirite, RITE, minibte, BTE13 DAI adaptor AP0 BTE13 and RITE Dedicated FM receiver ACCESSORIES Amigo R12 BTE13 and RITE FM adaptor FM 9 Compatible with Amigo R2 and other universal receivers BTE13 FITTING LEVELS Custom RITE BTE 8 2 3
PRoDUCt overview GENERAL FITTING Oticon Alta instruments are programmed using the Genie 14.2 fitting software or higher compatible with NOAH 3 or higher. Wireless fitting - FittingLINK FittingLINK provides a wireless link (Bluetooth) between the PC and one or two wireless enabled hearing instruments. In addition FittingLINK can be used via a USB cable connected to the PC. Wireless fitting - nearcom nearcom provides a wireless link between NOAHlink and one or two wireless enabled hearing instruments. In addition nearcom provides a pass-through connection to accommodate programming cables and replaces the existing NOAHlink neck loop. nearcom uses TM#1. Cabled fitting Use programming cable #3. minirite & RITE Receiver unit Must use minifit receivers. Select between three receiver types with different output performance, labeled according to fitting capabilities:, 85 and., 85 lengths 0 5 lengths 1 5 Receiver wire Receiver connector to instrument Separate wires connect Power Flex moulds () to RITE instruments, available in lengths 1 5. Type C1 (marked on packaging). ProWax minifit minifit receivers, 85 and ProWax Power Flex mould Micro mould LiteTip designrite BTE STYLES Receiver unit Receiver connector to instruments Must use minifit receiwer available in lengths 1-5. Type C3 (marked on packaging). ProWax minifit minifit receiver ProWax Micro mould LiteTip Sound hook Interchangeable standard and child hook. Damper Damping plug available for BTE13 85. Thin tubes ProWax Corda minifit (0.9 mm tube) for minibte 85 and BTE13 85. Corda minifit Power (1.3 mm tube) for BTE13. Thin tubes are available in lengths -1 4. Style specific adapters must be used when connecting thin tubes. Micro mould LiteTip RITE & BTE STYLES Ear pieces All minifit receivers and Corda minifit tubes must use minifit ear pieces. LiteTip and Micro mould (requires taking an impression). Type Open dome Power dome Bass dome, single vent Bass dome, double vent Sizes 6, 8, mm 6, 8,, 12 mm 6, 8,, 12 mm 6, 8,, 12 mm 4
Features Oticon Alta Pro Oticon Alta Fitting formulas VAC, NAL, DSL VAC, NAL, DSL Speech Guard E Yes Yes Spatial Sound Premium No YouMatic Premium Premium Binaural Processing (compression) Yes No Binaural Synchronisation (automatics) Yes Yes Binaural Coordination (PB operations) Yes Yes Spatial Noise Management Yes No Transient Management Yes Yes Fitting Bandwidth* khz khz Free Focus Premium Premium Inium feedback shield Yes Yes Artificial Intelligence Premium [+] Premium [+] Power Bass Yes Yes Music Widening Yes Yes Learning Yes Yes Fitting Bands Frequency channels 16 16 *) Bandwidth accessible for gain adjustments during fitting COLOUR SELECTION RITE & BTE STYLES Chroma Beige 94 Terracotta 93 Chestnut Brown 44 Silver 91 Silver Grey 92 Steel Grey 63 Diamond Black ADDITIONAL designrite COLOURS 99 Pale Lime 95 Vivid Lilac 66 Mother of Pearl 73 Carbernet Red 68 Midnight Blue 69 Sunset Orange CUSTOM STYLES 01 Beige 02 Light Brown 03 Medium Brown 04 Dark Brown 05 Black IIC & CIC only POWER FLEX MOULDS 01 Beige 02 Light Brown 03 Medium Brown 04 Dark Brown 05 Black 06 Transparent 5
CUstoM 75 (IIC only) IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL All measurements are made on instruments with ProWax receiver and T-Cap microphone protection. Alta_Pro_IIC_FOG_711_S 14 13 kbn_tjn 16:33:32 P084_Intiga i 711_OSPL 17 11 11 str_lo 09:34:08 P084_Intiga i 2cc_FOG 02 01 12 str_lo 11:02:23 P084_Intiga i 2cc_OSPL 21 11 11 str_lo 13:25:28 Alta_Pro_IIC_Freqdb_711_S 14 13 kbn_tjn 16:32:51 P084_Intiga i 2cc_FRESP 02 01 12 str_lo 11:04:58 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 121 9 111 3 9 3 45 35 41 33 34-90 Hz -80 Hz <2 % 2 % 21 18 0.7 ma 0.7 ma 0.7 ma 0.7 ma Size: (IEC PR) IRIL (IEC 118-13-11) 135 0//00 MHz: 16/16/<9 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: For custom instruments, the maximum gain is customised for optimal size and performance. 6
CUstoM 75 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL All measurements are made on instruments with ProWax and T-Cap or O-Cap protection. directional mode is used unless FOG_711_ITC75 05 12 str_lo 13:44:12 MPO_711_ITC75 05 12 str_lo 11:43:08 FOG_2CC_ITC75t 05 12 str_lo 11:39: MPO_2cc_ITC75 05 12 str_lo 11:42:45 Acoustic input: MT_711_ITC 75 05 12 str_lo 11:48:42 Acoustic input: MT_2cc_ITC 75 05 12 str_lo 11:49:57 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 119 9 112 4 5 49 38 43 35 41 35 36 27-90 Hz -80 Hz 73-93 - - 82/82 2.0 % <2 % 2.0 % <2 % 3.0 % 2.0 % 22 31 29 Size: (IEC PR) / 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC 118-13-11) IRIL (IEC 118-13-11) for IIC and CIC 135/1/2 0//00 MHz: 28/44/37 0//00 MHz: 17/33/26 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: For custom instruments, the maximum gain is customised for optimal size and performance. 7
CUstoM 85 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL All measurements are made on instruments with ProWax and T-Cap or O-Cap protection. directional mode is used unless FOG_711_ITC 85 05 12 str_lo 11:57:25 MPO_711_ITC 85 05 12 str_lo 11:56:06 FOG_2cc_ITC 85 05 12 str_lo 11:57:54 MPO_2cc_ITC 85 05 12 str_lo 11:56:35 Acoustic input: MT_711_ITC 85 05 12 str_lo 11:54:52 Acoustic input: MT_2cc_ITC 85 05 12 str_lo 11:55:28 OSPL Telecoil output () 1 ma/m field ma/m field SPLITS L / R 0 Hz (Input ) 0 Hz 126 117 119 111 117 113 59 51 43 45 44 37-90 Hz -00 Hz 81-1 - - / 2.0 % <2 % 2.0 % <2 % 3.0 % 2.0 % 22 19 32 29 8 Size: (IEC PR) / 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC 118-13-11) IRIL (IEC 118-13-11) for IIC and CIC 125/1/2 0//00 MHz: 21/39/<14 0//00 MHz: </26/29 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: For custom instruments, the maximum gain is customised for optimal size and performance.
CUstoM IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL All measurements are made on instruments with ProWax and O-Cap protection. directional mode is used unless 1 FOG_711_ITC 05 12 str_lo 13:28:37 MPO_711_ITC 05 12 str_lo 13:24:33 1 FOG_2cc_ITC 05 12 str_lo 13:29:14 MPO_2cc_ITC 05 12 str_lo 13:27:43 Acoustic input: MT_711_ITC 05 12 str_lo 13::09 Acoustic input: MT_2cc_ITC 05 12 str_lo 13:31:01 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 1 121 123 115 121 116 64 54 56 47 54 49 48-80 Hz -80 Hz 85-5 - - 93/93 3.0 % 2.0 % 23 19 34 29 Size: 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC 118-13-11) 1/2 0//00 MHz: 26/55/41 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: For custom instruments, the maximum gain is customised for optimal size and performance. 9
CUstoM IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL All measurements are made on instruments with ProWax and O-Cap protection. directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 Acoustic input: Alta_MPO ITE _711 08 13 str_lo 14:24:18 ALTA ITE _ FOG_711 08 13 str_lo 14::32 Alta ITE _ MT _711 08 13 str_lo 14:27:48 1 Acoustic input: Alta ITE _MPO_2cc 08 13 str_lo 14:26:44 Alta ITE _FOG_2cc 08 13 str_lo 14::57 Alta ITE MT_2cc 08 13 str_lo 14:28:23 OSPL Telecoil output () 1 ma/m field ma/m field SPLITS L / R 0 Hz (Input ) 0 Hz 135 127 135 127 1 123 71 62 67 59 65 58 48-8175 Hz -00 Hz 95-115 - - 5/5 2.0 % <2 % 17 15 27 26 0.9 ma 0.9 ma 0.9 ma 0.9 ma Size: 312 (IEC PR41) / 13 (IEC PR48) IRIL (IEC 118-13-11) 155/2 0//00 MHz: 15/45/28 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment Note: For custom instruments, the maximum gain is customised for optimal size and performance.
designrite IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless Alta MPO 711 31 03 14 kbn_tjn 14:42:29 Alta designrite FOG_711 02 04 14 kbn_tjn 13:53:13 Alta FOG 2cc 31 03 14 kbn_tjn 14:41:14 Alta MPO 2cc 31 03 14 kbn_tjn 14:42:57 Frequency responce designrite_711 02 04 14 kbn_tjn 15:27:47 Alta Frequency response 2CC 02 04 14 kbn_tjn 15:28:09 8 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 127 117 112 117 111 62 53 53 44 47 45 34-90 Hz - Hz 21 17 33 1.3 ma 1.3 ma Size: (IEC PR) IRIL (IEC 118-13-11) 0//00 MHz: <17 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 11
minirite IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless mrites_fog_711 29 08 12 str_lo 16:23:55 mrites_mpo_711 29 08 12 str_lo 15:45:26 mrites_fog_2cc 29 08 12 str_lo 16:24:26 mrites_mpo_2cc 29 08 12 str_lo 15:46:01 mrites_rtg_711 12 09 12 str_lo 08:31:12 mrites_rtg_2cc 12 09 12 str_lo 08:31:38 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 115 5 1 8 3 46 35 37 29 34 26-90 Hz -80 Hz 21 16 29 24 1.1 ma 1.3 ma Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: 43/26/18 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 12
minirite 85 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless mritem_fog_711 29 08 12 str_lo 16:25:51 mritem_mpo_711 29 08 12 str_lo 15:41:44 mritem_fog_2cc 29 08 12 str_lo 16:26:43 mritem_mpo_2cc 29 08 12 str_lo 15::54 mritem_rtg_711 29 08 12 str_lo 16:19:35 mritem_rtg_2cc 29 08 12 str_lo 16::12 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 127 118 123 114 119 114 65 55 51 43 52 47 44 38-90 Hz -80 Hz 2.4 % <2 % 25 18 33 25 1.1 ma 1.2 ma Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: 45//25 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 13
minirite IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 mritep_rtg_711 29 08 12 str_lo 16:21:14 mritep_fog_711 29 08 12 str_lo 16:27:33 mritep_mpo_711 29 08 12 str_lo 15:49:32 1 mritep_rtg_2cc 29 08 12 str_lo 16:21:53 mritep_fog_2cc 29 08 12 str_lo 16:28:08 mritep_mpo_2cc 29 08 12 str_lo 15::28 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 132 124 131 124 126 121 66 57 56 49 58 52 44-80 Hz -8 Hz 2.5 % <2 % 22 16 25 1.1 ma 1.3 ma Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: 46/28/23 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 14
RIte IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless mrites_fog_711 29 08 12 str_lo 16:23:55 mrites_mpo_711 29 08 12 str_lo 15:45:26 mrites_fog_2cc 29 08 12 str_lo 16:24:26 mrites_mpo_2cc 29 08 12 str_lo 15:46:01 Acoustic input: RiteS_MT_711 12 09 12 str_lo 08:35:07 Acoustic input: RiteS_MT_2cc 12 09 12 str_lo 08:35:47 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 115 5 1 8 3 46 35 37 29 34 26-90 Hz -80 Hz 65-85 - - 82/82 21 16 29 24 1.1 ma 1.3 ma Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: 27/46/51 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 15
RIte 85 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless mritem_fog_711 29 08 12 str_lo 16:25:51 mritem_mpo_711 29 08 12 str_lo 15:41:44 mritem_fog_2cc 29 08 12 str_lo 16:26:43 mritem_mpo_2cc 29 08 12 str_lo 15::54 Acoustic input: RiteM_MT_711 12 09 12 str_lo 08:16:53 Acoustic input: RiteM_MT_2cc 12 09 12 str_lo 08:17:42 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 127 118 123 114 119 114 65 55 51 43 52 47 44 38-90 Hz -80 Hz 79-99 - - 95/95 2.4 % <2 % 25 18 33 25 1.1 ma 1.2 ma Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: 19/41/36 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 16
RIte IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 Acoustic input: mritep_mpo_711 29 08 12 str_lo 15:49:32 mritep_fog_711 29 08 12 str_lo 16:27:33 RiteP_MT_711 12 09 12 str_lo 08:18:27 1 Acoustic input: mritep_mpo_2cc 29 08 12 str_lo 15::28 mritep_fog_2cc 29 08 12 str_lo 16:28:08 RiteP_MT_2cc 12 09 12 str_lo 08:18:55 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 132 124 131 124 126 121 66 57 56 49 58 52 44-80 Hz -8 Hz 85-5 - - 1/1 2.5 % <2 % 22 16 25 1.1 ma 1.3 ma Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: <17/49/39 * Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 17
minibte 85 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless 1 Std. tube Standard tube Thin tube (size 1/0.9) G38_Agil_miniBTE_711_OSPL 01 12 11 str_lo 15:13:31 G38_Agil_miniBTE_711_FOG 01 12 11 str_lo 15:16:44 G38_Agil_miniBTE_711_FRESP 21 11 11 str_lo 14:31:25 1 Std. tube Standard tube Thin tube (size 1/0.9) G38_Agil_miniBTE_2cc_OSPL 01 12 11 str_lo 15:13:05 G38_Agil_miniBTE_2cc_FOG 01 12 11 str_lo 15:16:11 G38_Agil_miniBTE_2cc_FRESP_update 14 11 11 str_lo 09:55:02 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 131 (122*) 121 (117*) 126 (114*) (5*) 119 (116*) 118 (9*) 62 (61*) 53 (57*) (39*) 44 (*) (52*) 46 (*) 43 41-80 Hz - Hz 22 17 29 25 1.1 ma 1.2 ma 18 * Size 312 (IEC PR41) IRIL (IEC 118-13-11) 1 0//00 MHz: <18/24/36 * For instruments fitted with Corda minifit ** Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
Bte13 85 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless Std. tube Standard tube Thin tube (size 1/0.9) Acoustic input: BTE13_MPO_711 12 09 12 str_lo 08:49:11 BTE13_gain_711 12 09 12 str_lo 09:00:25 BTE13_MT_711 12 09 12 str_lo 08:58:12 Std. tube Standard tube Thin tube (size 1/0.9) Acoustic input: BTE13_MPO_2cc 12 09 12 str_lo 08::01 BTE13_gain_2cc 12 09 12 str_lo 09:01:00 BTE13_MT_2cc 12 09 12 str_lo 08:58:41 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 126 (126*) 117 (123*) 121 (8*) 114 (*) 116 (116*) 113 (6*) 61 (63*) 51 (59*) (36*) 43 (28*) 49 (52*) 44 (41*) 43 36-90 Hz -70 Hz 79-99 - - 94/94 23 18 32 27 1.1 ma 1.1 ma 1.1 ma 1.1 ma * Size 13 (IEC PR48) IRIL (IEC 118-13-11) 2 0//00 MHz: 24/48/45 * For instruments fitted with Corda minifit ** Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment 19
Bte13 IEC 118-0 (1983) and 711 (1981) and DIN 455. ANSI S3.22 (03) and S3.7 (1995), IEC 118-7 (05) and IEC 318-5 (06). OSPL OSPL directional mode is used unless Warning to the instrument dispenser The maximum output capability of the hearing instrument may exceed 132 (IEC 711). Special care should be exercised in selecting and fitting the instrument as there may be risk of impairing the remaining hearing of the hearing instrument user. 1 Std. tube Standard tube Thin tube (size 1/1.3) Acoustic input: BTE13P_MPO_711 12 09 12 str_lo 08:51:22 BTEP_gain_updateCorda_711 04 12 str_lo 16:57:32 BTE13P_MT_711 12 09 12 str_lo 08:55:03 1 Std. tube Standard tube Thin tube (size 1/1.3) Acoustic input: BTE13P_MPO_2cc 12 09 12 str_lo 08:52:06 BTEP_gain_updateCorda_2cc 04 12 str_lo 16:58:23 BTE13P_MT_2cc 12 09 12 str_lo 08:56:04 OSPL Telecoil output () 1 ma/m field ma/m field 0 Hz (Input ) 0 Hz 135 (132*) 126 (128*) 128 (116*) (8*) 122 (121*) (115*) 68 (66*) (62*) (44*) 52 (36*) 57 (56*) 53 (49*) 53 43-90 Hz - Hz 89-9 - - / 19 16 29 26 1.1 ma 1.1 ma 1.1 ma 1.1 ma * Size 13 (IEC PR48) IRIL (IEC 118-13-11) 2 0//00 MHz: 24/48/45 * For instruments fitted with Corda minifit Power ** Based on the standardised battery consumption measurement (IIC 118-0.) The actual battery life depends on battery quality, use pattern, active feature set, hearing loss and sound environment
notes
notes
notes
People First is our promise to empower people to communicate freely, interact naturally and participate actively 1466UK / 06.14 Printed on % recycled paper www.oticon.com