Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö

Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances. Abbreviations used in the catalog: EC = external cooling lubricant supply approx. = approximately D = diameter max = maximum min = minimum IC = internal cooling lubricant supply MT = Morse taper R = radius s = wrench size ST = steep taper SQ = square A Word on Copyright This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation. Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2014 Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2014

Table of Contents Table of Contents... 0 Technical Information INDEX C100... 1 Usage Information INDEX C100... 2 Tool holder fix, Shank VDI 25... 3 Tool holder live, Shank VDI 25... 4 Tool holder to spring-loaded tap holder, Shank VDI 20... 5 Tool holder to spring-loaded tap holder, Shank VDI 25... 6 Tool holder to spring-loaded tap holder, Shank VDI 30... 7 Tool holder fix, Vee mounting... 8 Tool holder live, Vee mounting... 9 Tool holder fix, Shank VDI 25, Rear End Machining Unit... 10 Tool holder live, Shank VDI 25, Rear End Machining Unit... 11 Tool holder fix, Shank 1, Rear End Machining Unit... 12 Tool holder live, Shank 1, Rear End Machining Unit... 13 Accessories INDEX ABC... 14 Product notes... 15 For accessories for tool holders visit http://infoshop.index-werke.de/ For more information, visit http://infoshop.index-werke.de/ 3

For more information, visit http://infoshop.index-werke.de/ 4

Table of Contents For more information, visit http://infoshop.index-werke.de/ 0-1

For more information, visit http://infoshop.index-werke.de/ 0-2

Technical Information INDEX ABC Catalog page Warranty 1-2 Information on wear parts Inspection of live tool holders and guide bushings Tool holders with cooling lubricant supply 1-3 lubricant filtering Cleaning live tool holders Speed ratio specifications on tool holders Direction of rotation specification 1-4 Tightening Torque 1-5 Replacement seals for tool shank Sealing air port Tool holders with fixation 1-6 High-pressure unit Load limits of live tools Live tool holders 1-7 Weight distribution on turret head 1-8 Collision Tool change on live tool holders For more information, visit http://infoshop.index-werke.de/ A-1

Technical Information INDEX ABC Catalog page Information on how to use the chart 1-9 when using tool holders For more information, visit http://infoshop.index-werke.de/ A-2

Usage Information INDEX ABC Structure of the INDEX ABC Catalog page 2-2 Work area INDEX ABC 2-3 Work area INDEX ABC 2-4 KL9652.70351 Performance chart 2-5 Driven tools, Tool carrier 1 Speed range 0-4500min -1 KL9652.40021 2-6 Performance chart Driven tools, Tool carrier 2 Speed range 0-6000min -1 For more information, visit http://infoshop.index-werke.de/ B-1

Tool holder fix Shank VDI 25 Catalog page W1200039 Bar stop, live 3-2 none Mounting D25 70 (2.76) / / 30 (1.18) mm ('') W9990159 Bar stop, live 3-3 Mounting D58 / / 30 (1.18) mm ('') W9990160 Bar stop, live 3-4 Mounting D85 / / 30 (1.18) mm ('') W1230000 Compensation holder 3-5 Vee bar Mounting VDI 20 external and internal, p max 20 bar 70 (2.76) / / 2 (0.8) mm ('') W1230035 Compensation holder 3-6 Vee bar Mounting VDI 20 external and internal, p max 40 bar 60 (2.36) / / 2 (0.8) mm ('') W1230027 Compensation holder 3-7 Vee bar Mounting VDI 25 internal, p max 80 bar 70 (2.76) / / 2 (0.8) mm ('') W1230003 Compensation holder 3-8 Vee bar Mounting VDI 30 internal, p max 80 bar 60 (2.36) / / 3 (0.12) mm ('') For more information see http://infoshop.index-werke.de/ C-1

Tool holder fix Shank VDI 25 Catalog page W1230026 Compensation holder 3-9 Vee bar Mounting VDI 30 internal, p max 80 bar 70 (2.76) / / -5 (-0.2) mm ('') W1230025 Compensation holder 3-10 Vee bar Mounting D1'' external, p max 80 bar 60 (2.36) / / 15 (0.59) mm ('') W1200042 Drilling tool holder, Specially for the marking tool WriteStar 3-11 none Mounting D12 68 (2.68) / / mm ('') W1230036 Drilling tool holder 3-12 Vee bar Mounting ER 16 external, p max 20 bar 60 (2.36) / / mm ('') W1230054 Drilling tool holder 3-13 Vee bar Mounting ER 25 external and internal, p max 80 bar 60 (2.36) / / 31 (1.22) mm ('') W1230056 Drilling tool holder 3-14 Vee bar Mounting ER 25 external and internal, p max 80 bar 70 (2.76) / / 31 (1.22) mm ('') W1230055 Drilling tool holder 3-15 Vee bar Mounting ER 32 external and internal, p max 80 bar 60 (2.36) / / 52 (25) mm ('') For more information see http://infoshop.index-werke.de/ C-2

Tool holder fix Shank VDI 25 Catalog page W1230007 Drilling tool holder, vertically adjustable 3-16 Vee bar Mounting DIN 1835 B/E D16 internal, p max 80 bar 70 (2.76) / / 25 (0.98) mm ('') W1230046 Drilling tool holder 3-17 Vee bar Mounting DIN 1835 B/E D32 external and internal, p max 80 bar 60 (2.36) / / 30 (1.18) mm ('') W1230006 Drilling tool holder 3-18 Vee bar Mounting ER 40 external and internal, p max 40 bar 70 (2.76) / / 55 (2.17) mm ('') W1230032 Drilling tool holder 3-19 Vee bar Mounting D12 external and internal, p max 20 bar 70 (2.76) / / 30 (1.18) mm ('') W1210001 Drilling tool holder, vertically adjustable 3-20 Setting gauge Mounting D16 internal, p max 80 bar 60 (2.36) / ±1.5 (±06) / 30 (1.18) mm ('') W1200000 Turning tool holder, Form C1/C4 3-21 none Mounting square 16x16 external, p max 20 bar 55 (2.17) / / 19 (0.75) mm ('') W1200003 Turning tool holder, Form C2/C3 3-22 none Mounting square 16x16 external, p max 20 bar 55 (2.17) / / 19 (0.75) mm ('') For more information see http://infoshop.index-werke.de/ C-3

Tool holder fix Shank VDI 25 Catalog page W1200001 Turning tool holder, Form C1/C4 3-23 none Mounting square 20x20 external, p max 20 bar 55 (2.17) / / 15 (0.59) mm ('') W1200004 Turning tool holder, Form C2/C3 3-24 none Mounting square 20x20 external, p max 20 bar 55 (2.17) / / 19 (0.75) mm ('') W1200025 Turning tool holder, double 3-25 none Mounting square 20x20 external, p max 20 bar 55 (2.17) / / 17 (0.67) mm ('') W1200021 Turning tool holder, Form C2/C3 3-26 none Mounting square 3/4x3/4'' internal, p max 20 bar 55 (2.17) / / 19 (0.75) mm ('') W1200022 Turning tool holder, Form C1/C4 3-27 none Mounting square 3/4x3/4'' internal, p max 20 bar 55 (2.17) / / 15 (0.59) mm ('') W1220007 Turning tool holder 3-28 Clamping and stop bar Mounting square 20x20 external, p max 80 bar 40 (1.57) / / 30 (1.18) mm ('') W1230016 Turning tool holder 3-29 Vee bar Mounting square 20x20 external, p max 40 bar 18.5 (0.73) / / 30 (1.18) mm ('') For more information see http://infoshop.index-werke.de/ C-4

Tool holder fix Shank VDI 25 Catalog page W1230021 Turning tool holder 3-30 Vee bar Mounting square 20x20 external, p max 40 bar 60 (2.36) / / 30 (1.18) mm ('') W1230029 Turning tool holder 3-31 Vee bar Mounting square 20x20 external, p max 80 bar 18.5 (0.73) / / 30 (1.18) mm ('') W1230031 Turning tool holder 3-32 Vee bar Mounting square 20x20 external, p max 80 bar 60 (2.36) / / 30 (1.18) mm ('') W1230020 Basic holder, vertically adjustable 3-33 Vee bar Mounting external and internal, p max 20 bar 35 (1.38) / / 5 (0.2) mm ('') W9990038 Grooving tool holding block, vertically adjustable 3-34 Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') W9990039 Grooving tool holding block, vertically adjustable 3-35 Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') W9990064 Grooving tool holding block, vertically adjustable 3-36 Mounting square 16x16 40 (1.57) / / 40 (1.57) mm ('') For more information see http://infoshop.index-werke.de/ C-5

Tool holder fix Shank VDI 25 Catalog page W9990066 Grooving tool holding block, vertically adjustable 3-37 Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') W9990067 Grooving tool holding block, vertically adjustable 3-38 Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') W9990068 Grooving tool holding block, vertically adjustable 3-39 Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') W9990069 Grooving tool holding block, vertically adjustable 3-40 Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') W9990070 Grooving tool holding block, vertically adjustable 3-41 Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') W9990071 Grooving tool holding block, vertically adjustable 3-42 Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') W9990072 Grooving tool holding block, vertically adjustable 3-43 Mounting square 16x16 20 (0.79) / / 17 (0.67) mm ('') For more information see http://infoshop.index-werke.de/ C-6

Tool holder fix Shank VDI 25 Catalog page W9990073 Grooving tool holding block, vertically adjustable 3-44 Mounting square 16x10 20 (0.79) / / 18 (0.71) mm ('') W9990074 Grooving tool holding block, vertically adjustable 3-45 Mounting Trapezoid 16x3 20 (0.79) / / 25 (0.98) mm ('') W9990075 Grooving tool holding block, vertically adjustable 3-46 Mounting Trapezoid 20x4 20 (0.79) / / 25 (0.98) mm ('') W9990076 Grooving tool holding block, vertically adjustable 3-47 Mounting Trapezoid 26x5 20 (0.79) / / 32 (1.26) mm ('') W9990154 Knurling tool holder 3-48 none Mounting D6 38 (1.5) / / 20 (0.79) mm ('') W1230004 Basic holder 3-49 Vee bar Mounting external and internal, p max 20 bar 70 (2.76) / / -5 (-0.2) mm ('') W9990085 Drill holding block 3-50 Mounting ER 25 internal, p max 20 bar 42.5 (1.67) / / mm ('') For more information see http://infoshop.index-werke.de/ C-7

Tool holder fix Shank VDI 25 Catalog page W9990086 Drill holding block 3-51 Mounting D20 external, p max 20 bar 40 (1.57) / / mm ('') W1200008 Scroll holder 3-52 none Mounting internal, p max 20 bar 65 (2.56) / / 40.5 (1.59) mm ('') W1200036 Calibrating tool 3-53 none Mounting 110 (4.33) / / mm ('') W1200009 Blanking plug 3-54 Mounting 10 (0.39) / / mm ('') W1200026 Coolant nozzle 3-55 none Mounting 16 (0.63) / / mm ('') For more information see http://infoshop.index-werke.de/ C-8

Tool holder live Shank VDI 25 Catalog page W1235047 Drilling unit 4-2 Vee bar Mounting ER 11 external, p max 20 bar Speed ratio 1:3 (0.333) 75 (2.95) / / 15 (0.59) mm ('') W1235049 Drilling unit 4-3 Vee bar Mounting ER 11 external, p max 20 bar Speed ratio 1:1.33 (0.75) 70 (2.76) / / 17.5 (0.69) mm ('') W1205022 Drilling unit 4-4 none Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) 54 (2.13) / / 0 mm ('') W1205025 Milling unit 4-5 none Mounting D16 external, p max 40 bar Speed ratio 4.5:1 (4.5) 82 (3.23) / / 0 mm ('') W1225010 Milling unit 4-6 Clamping and stop bar Mounting Milling tool mounting D22 external, p max 20 bar Speed ratio 2:1 (2) 74 (2.91) / / 45 (1.77) mm ('') W1205018 Tapping unit, extendable 4-7 none Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) 60 (2.36) / / 0 mm ('') W1235053 Circular saw unit 4-8 Vee bar Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2,7:1 (2,7) 68 (2.68) / / 0 mm ('') For more information see http://infoshop.index-werke.de/ D-1

Tool holder live Shank VDI 25 Catalog page W1235045 Drilling unit 4-9 Vee bar Mounting ER 20 external, p max 20 bar Speed ratio 1:1 (1) 70 (2.76) / / 53 (29) mm ('') W1235046 Drilling unit 4-10 Vee bar Mounting ER 20 external, p max 20 bar Speed ratio 1:1 (1) 60 (2.36) / / 53 (29) mm ('') W1235058 Drilling unit 4-11 Vee bar Mounting ER 20 external, internal optional, p max 20 bar Speed ratio 2:1 (2) 70 (2.76) / / 53 (29) mm ('') W1235042 Drilling unit 4-12 Vee bar Mounting DIN 1835 E D16 internal, p max 40 bar Speed ratio 1:2 (0.5) 60 (2.36) / / 79 (3.11) mm ('') W1235044 Milling unit 4-13 Vee bar Mounting D10 external, p max 40 bar Speed ratio 2.09:1 (2.09) 55 (2.17) / / 55 (2.17) mm ('') W1235052 Milling unit 4-14 Vee bar Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2.09:1 (2.09) 55 (2.17) / / 47.5 (1.87) mm ('') W1225008 Tapping unit, extendable 4-15 Clamping and stop bar Mounting ER 20 external, p max 40 bar Speed ratio 2:1 (2) 70 (2.76) / / 78 (37) mm ('') For more information see http://infoshop.index-werke.de/ D-2

Tool holder live Shank VDI 25 Catalog page W1235051 Broaching/ Slotting unit 4-16 Vee bar Mounting D20 external, p max 40 bar Speed ratio 1:1 (1) 60 (2.36) / / 75 (2.95) mm ('') W1235050 Drilling unit 4-17 Vee bar Mounting ER 11 external, p max 40 bar Speed ratio 1:1.7 (0.588) 44 (1.73) / / 37 (1.46) mm ('') W9990040 Milling cutter holding block 4-18 Mounting Milling tool mounting D13 / / mm ('') W9990041 Milling cutter holding block 4-19 Mounting Milling tool mounting D16 / / mm ('') W9990042 Milling cutter holding block 4-20 Mounting Milling tool mounting D22 / / mm ('') W9990043 Milling cutter holding block 4-21 Mounting Milling tool mounting D27 / / mm ('') W9990044 Milling cutter holding block 4-22 Mounting Milling tool mounting D32 / / mm ('') For more information see http://infoshop.index-werke.de/ D-3

Tool holder to spring-loaded tap holder Shank VDI 20 Catalog page W1100017 Bar stop, adjustable, live 5-2 none Mounting 49.5-71.5 (1.95-2.81) / / mm ('') W1100006 Drilling tool holder 5-3 none Mounting ER 16 internal, p max 20 bar 42.5 (1.67) / / mm ('') W1100007 Drilling tool holder, Form E4 5-4 none Mounting ER 25 internal, p max 80 bar 51 (21) / / mm ('') W1100010 Drilling tool holder, Form E4 5-5 none Mounting ER 40 internal, p max 20 bar 66.5 (2.62) / / mm ('') W1100004 Drilling tool holder, Form E1 5-6 none Mounting DIN 1835 B/E D20 internal, p max 20 bar 48 (1.89) / / mm ('') W1100005 Drilling tool holder, Form E1 5-7 none Mounting DIN 1835 B/E D25 internal, p max 80 bar 56.5 (2.22) / / mm ('') W1100018 Drilling tool holder, Form E2 5-8 none Mounting D10 external, p max 20 bar 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ E-1

Tool holder to spring-loaded tap holder Shank VDI 20 Catalog page W1100019 Drilling tool holder, Form E2 5-9 none Mounting D12 external, p max 20 bar 50 (1.97) / / mm ('') W1100001 Drilling tool holder 5-10 none Mounting D15 external, p max 20 bar 26 (12) / / mm ('') W1100020 Drilling tool holder, Form E2 5-11 none Mounting D16 external, p max 20 bar 50 (1.97) / / mm ('') W1100009 Drilling tool holder 5-12 none Mounting D25 external, p max 20 bar 43 (1.69) / / mm ('') W1100002 Basic holder, vertically adjustable 5-13 none Mounting internal, p max 20 bar 14 (0.55) / / mm ('') W9990085 Drill holding block 5-14 Mounting ER 25 internal, p max 20 bar 42.5 (1.67) / / mm ('') W9990086 Drill holding block 5-15 Mounting D20 external, p max 20 bar 40 (1.57) / / mm ('') For more information see http://infoshop.index-werke.de/ E-2

Tool holder to spring-loaded tap holder Shank VDI 20 Catalog page W1100014 Center holder, elastic, live, Center replaceble 5-16 none Mounting MK0 66 (2.6) / / mm ('') W1100013 Center holder, elastic, live 5-17 none Mounting 65 (2.56) / / mm ('') W1100011 Tapping tool holder, over-running 5-18 none Mounting D12 external, p max 20 bar 56 (2.2) / / mm ('') W1100003 Tapping tool holder 5-19 none Mounting D18 external, p max 20 bar 50.5 (1.99) / / mm ('') W1100012 Reaming tool holder, adjustable 5-20 none Mounting D12 external, p max 20 bar 52 (25) / / mm ('') W1100016 Broaching/ Slotting tool holder, rotating, live 5-21 none Mounting D12 external, p max 20 bar 66 (2.6) / / mm ('') W1100015 Broaching/ Slotting tool holder, rotating, live 5-22 none Mounting D14 external, p max 20 bar 69 (2.72) / / mm ('') For more information see http://infoshop.index-werke.de/ E-3

Tool holder to spring-loaded tap holder Shank VDI 25 Catalog page W1200006 Drilling tool holder, Form E4 6-2 none Mounting ER 25 internal, p max 40 bar 57 (2.24) / / mm ('') W1200017 Drilling tool holder, Form E4 6-3 none Mounting ER 32 internal, p max 80 bar 62 (2.44) / / mm ('') W1200011 Drilling tool holder, Form E1 6-4 none Mounting DIN 1835 B/E D16 internal, p max 80 bar 67 (2.64) / / mm ('') W1200012 Drilling tool holder, Form E1 6-5 none Mounting DIN 1835 B/E D20 internal, p max 80 bar 67 (2.64) / / mm ('') W1200013 Drilling tool holder, Form E1 6-6 none Mounting DIN 1835 B/E D25 internal, p max 80 bar 71 (2.8) / / mm ('') W1200014 Drilling tool holder, Form E1 6-7 none Mounting DIN 1835 B/E D32 internal, p max 80 bar 74 (2.91) / / mm ('') W1200020 Drilling tool holder, Form E2 6-8 none Mounting D8 external and internal, p max 80 bar 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ F-1

Tool holder to spring-loaded tap holder Shank VDI 25 Catalog page W1200015 Drilling tool holder, Form E2 6-9 none Mounting D10 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200016 Drilling tool holder, Form E2 6-10 none Mounting D12 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200042 Drilling tool holder, Specially for the marking tool WriteStar 6-11 none Mounting D12 68 (2.68) / / mm ('') W1200019 Drilling tool holder, Form E2 6-12 none Mounting D16 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200033 Drilling tool holder, Form E2 6-13 none Mounting D20 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200018 Drilling tool holder, Form E2 6-14 none Mounting D25 external and internal, p max 80 bar 60 (2.36) / / mm ('') W9990095 Compensation bushing 6-15 none Mounting D3/4'' 6 (0.24) / / mm ('') For more information see http://infoshop.index-werke.de/ F-2

Tool holder to spring-loaded tap holder Shank VDI 25 Catalog page W1200007 Tapping tool holder, extendable 6-16 none Mounting DIN 1835 B/E D18 external, p max 20 bar 50 (1.97) / / mm ('') W1200028 Reaming tool holder 6-17 none Mounting ER 16 external, p max 20 bar 63 (2.48) / / mm ('') W1200030 Broaching/ Slotting tool holder, rotating, live 6-18 none Mounting D12 external, p max 20 bar 60 (2.36) / / mm ('') W1200027 Calibrating tool 6-19 none Mounting 190 (7.48) / / mm ('') For more information see http://infoshop.index-werke.de/ F-3

Tool holder to spring-loaded tap holder Shank VDI 30 Catalog page W1300037 Bar stop, adjustable, live 7-2 none Mounting 60-97 (2.36-3.82) / / mm ('') W1300038 Bar stop, adjustable, live 7-3 none Mounting 60-97 (2.36-3.82) / / mm ('') W9990096 Compensation bushing 7-4 none Mounting D3/4'' 6 (0.24) / / mm ('') W9990094 Compensation bushing 7-5 none Mounting D1'' 6 (0.24) / / mm ('') W1300023 Compensation holder 7-6 none Mounting D1'' internal, p max 20 bar 60 (2.36) / / mm ('') W1300025 Drilling tool holder, Form E4 7-7 none Mounting ER 25 internal, p max 80 bar 68 (2.68) / / mm ('') W1300066 Drilling tool holder, Form E4 7-8 none Mounting ER 32 internal, p max 20 bar 76 (2.99) / / mm ('') For more information see http://infoshop.index-werke.de/ G-1

Tool holder to spring-loaded tap holder Shank VDI 30 Catalog page W1300026 Drilling tool holder, Form E4 7-9 none Mounting ER 40 internal, p max 80 bar 80 (3.15) / / mm ('') W1300057 Drilling tool holder, Form E1 7-10 none Mounting DIN 1835 E D20 internal, p max 80 bar 67 (2.64) / / mm ('') W1300058 Drilling tool holder, Form E1 7-11 none Mounting DIN 1835 E D25 internal, p max 80 bar 71 (2.8) / / mm ('') W1300014 Drilling tool holder, Form E2 7-12 none Mounting D8 external and internal, p max 20 bar 60 (2.36) / / mm ('') W1300015 Drilling tool holder, Form E2 7-13 none Mounting D10 external and internal, p max 20 bar 60 (2.36) / / mm ('') W1300016 Drilling tool holder, Form E2 7-14 none Mounting D12 external and internal, p max 20 bar 60 (2.36) / / mm ('') W1300067 Drilling tool holder, Specially for the marking tool WriteStar 7-15 none Mounting D12 68 (2.68) / / mm ('') For more information see http://infoshop.index-werke.de/ G-2

Tool holder to spring-loaded tap holder Shank VDI 30 Catalog page W1300017 Drilling tool holder, Form E2 7-16 none Mounting D16 external and internal, p max 20 bar 60 (2.36) / / mm ('') W1300018 Drilling tool holder, Form E2 7-17 none Mounting D20 external and internal, p max 20 bar 60 (2.36) / / mm ('') W1300019 Drilling tool holder, Form E2 7-18 none Mounting D25 external and internal, p max 20 bar 60 (2.36) / / mm ('') W1300053 Drilling tool holder 7-19 none Mounting D25 external and internal, p max 40 bar 45 (1.77) / / mm ('') W1300013 Drilling tool holder, Form E2 7-20 none Mounting D32 external, p max 20 bar 70 (2.76) / / mm ('') W1300022 Drilling tool holder 7-21 none Mounting D32 internal, p max 80 bar 73 (2.87) / / mm ('') W1300027 Drilling tool holder 7-22 none Mounting MK1 external, p max 20 bar 30 (1.18) / / mm ('') For more information see http://infoshop.index-werke.de/ G-3

Tool holder to spring-loaded tap holder Shank VDI 30 Catalog page W1300028 Drilling tool holder 7-23 none Mounting MK2 external, p max 20 bar 27 (16) / / mm ('') W1300029 Drilling tool holder 7-24 none Mounting MK3 external, p max 20 bar 45 (1.77) / / mm ('') W1300012 Basic holder, vertically adjustable 7-25 none Mounting external, p max 20 bar 14 (0.55) / / mm ('') W9990092 Drill holding block 7-26 Mounting ER 25, p max 40 bar 30 (1.18) / / mm ('') W9990093 Drill holding block 7-27 Mounting D32, p max 40 bar 57 (2.24) / / mm ('') W1300004 Center holder, live 7-28 none Mounting D15.4/Cone 1:7.5 69.5 (2.74) / / mm ('') W1300005 Center holder, elastic, live 7-29 none Mounting D15.4/Cone 1:7.5 68.5 (2.7) / / mm ('') For more information see http://infoshop.index-werke.de/ G-4

Tool holder to spring-loaded tap holder Shank VDI 30 Catalog page W1300030 Tapping tool holder, extendable 7-30 none Mounting D25 external, p max 20 bar 73 (2.87) / / mm ('') W1300031 Reaming tool holder, adjustable 7-31 none Mounting ER 25 external, p max 20 bar 73.5 (2.89) / / mm ('') W1300032 Reaming tool holder, adjustable 7-32 none Mounting D18 external, p max 20 bar 59 (2.32) / / mm ('') W1300065 Reaming tool holder, self-centering 7-33 none Mounting D20 internal, p max 40 bar 93 (3.66) / / mm ('') W1300034 Broaching/ Slotting tool holder, rotating, live 7-34 none Mounting D12 external, p max 20 bar 60 (2.36) / / mm ('') For more information see http://infoshop.index-werke.de/ G-5

Tool holder fix Vee mounting Catalog page W8900003 Bar stop, adjustable 8-2 none Mounting 85 (3.35) / / -17 (-0.67) mm ('') W8900014 Bar stop, adjustable, live 8-3 none Mounting 85 (3.35) / / -65 (-2.56) mm ('') W8900001 Turning tool holder, double 8-4 none Mounting square 20x20 external, p max 20 bar 65 (2.56) / / 0 mm ('') W8900002 Turning tool holder 8-5 none Mounting square 20x20 external, p max 20 bar 85 (3.35) / / 0 mm ('') W8900006 Basic holder, Contour plunging tool holder 8-6 none Mounting external, p max 40 bar 45.5 (1.79) / / 9 (0.35) mm ('') W9990244 Grooving tool holding block, adjustable 8-7 Mounting 40 (1.57) / / mm ('') W8900007 Basic holder, angle-adjustable 8-8 none Mounting external, p max 40 bar 42 (1.65) / / 0 mm ('') For more information see http://infoshop.index-werke.de/ H-1

Tool holder fix Vee mounting Catalog page W9990055 Grooving tool holding block, vertically adjustable 8-9 Mounting external, p max 20 bar 30 (1.18) / / mm ('') W9990065 Grooving tool holding block, vertically adjustable 8-10 Mounting external, p max 20 bar 38 (1.5) / / mm ('') W8900013 Basic holder, adjustable 8-11 none Mounting external, p max 40 bar 52 (25) / / 10 (0.39) mm ('') W9990245 Grooving tool holding block, adjustable 8-12 Mounting square 20x20 37 (1.46) / / 28 (1.10) mm ('') W9990246 Grooving tool holding block, adjustable 8-13 Mounting square 20x20 45 (1.77) / / 28 (1.10) mm ('') W9990064 Grooving tool holding block, vertically adjustable 8-14 Mounting square 16x16 40 (1.57) / / 40 (1.57) mm ('') W9990066 Grooving tool holding block, vertically adjustable 8-15 Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') For more information see http://infoshop.index-werke.de/ H-2

Tool holder fix Vee mounting Catalog page W9990067 Grooving tool holding block, vertically adjustable 8-16 Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') W9990068 Grooving tool holding block, vertically adjustable 8-17 Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') W9990069 Grooving tool holding block, vertically adjustable 8-18 Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') W9990072 Grooving tool holding block, vertically adjustable 8-19 Mounting square 16x16 20 (0.79) / / 17 (0.67) mm ('') W9990073 Grooving tool holding block, vertically adjustable 8-20 Mounting square 16x10 20 (0.79) / / 18 (0.71) mm ('') W9990074 Grooving tool holding block, vertically adjustable 8-21 Mounting Trapezoid 16x3 20 (0.79) / / 25 (0.98) mm ('') W9990075 Grooving tool holding block, vertically adjustable 8-22 Mounting Trapezoid 20x4 20 (0.79) / / 25 (0.98) mm ('') For more information see http://infoshop.index-werke.de/ H-3

Tool holder fix Vee mounting Catalog page W9990076 Grooving tool holding block, vertically adjustable 8-23 Mounting Trapezoid 26x5 20 (0.79) / / 32 (1.26) mm ('') W9990154 Knurling tool holder 8-24 none Mounting D6 38 (1.5) / / 20 (0.79) mm ('') W8900005 Basic holder, vertically adjustable 8-25 none Mounting external and internal, p max 20 bar 62 (2.44) / / -30 (-1.18) mm ('') W9990242 Drill holding block, horizontally adjustable 8-26 Mounting D1'', p max 20 bar 23.55 (0.93) / / 50 (1.97) mm ('') W9990045 Drill holding block 8-27 Mounting D25 23.55 (0.93) / / mm ('') W9990243 Drill holding block 8-28 none Mounting D25 external, p max 20 bar 33.55 (1.32) / / 50 (1.97) mm ('') W8900009 Center holder, elastic 8-29 Mounting MK1 85 (3.35) / / -71 (-2.8) mm ('') For more information see http://infoshop.index-werke.de/ H-4

Tool holder fix Vee mounting Catalog page W8900010 Scroll holder 8-30 Mounting, p max 40 bar 90 mm (3.54 '') / / mm ('') W8900012 Calibrating tool 8-31 none Mounting D40 110 (4.33) / / 0 mm ('') W8900000 Cover plate, Steel 8-32 none Mounting 12 (0.47) / / mm ('') For more information see http://infoshop.index-werke.de/ H-5

Tool holder live Vee mounting Catalog page W8905002 Drilling unit 9-2 none Mounting ER 11 external, p max 20 bar Speed ratio 1:1.33 (0.75) 87 (3.43) / / 1.5 (06) mm ('') W8905004 Drilling unit, vertically adjustable 9-3 none Mounting ER 16 external, p max 20 bar Speed ratio 1:1.93 (0.518) 105 (4.13) / / 37.5 (1.48) mm ('') W8905000 Drilling unit 9-4 none Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) 64 (2.52) / / -16.5 (-0.65) mm ('') W8905001 Milling unit 9-5 none Mounting DIN 1835 B/E D16 external, p max 40 bar Speed ratio 4.5:1 (4.5) 96 (3.78) / / -16.5 (-0.65) mm ('') W8905005 Drilling unit 9-6 none Mounting ER 20 external, p max 20 bar Speed ratio 1:1.13 (0.8857) 85 (3.35) / / 36.5 (1.44) mm ('') W8905003 Drilling unit, angle-adjustable 9-7 none Mounting ER 11 external, p max 40 bar Speed ratio 1:1.7 (0.588) 62 (2.44) / / 53.5 (2.11) mm ('') For more information see http://infoshop.index-werke.de/ I-1

Tool holder fix Shank VDI 25, Rear End Machining Unit Catalog page W1200006 Drilling tool holder, Form E4 10-2 none Mounting ER 25 internal, p max 40 bar 57 (2.24) / / mm ('') W1200017 Drilling tool holder, Form E4 10-3 none Mounting ER 32 internal, p max 80 bar 62 (2.44) / / mm ('') W1200011 Drilling tool holder, Form E1 10-4 none Mounting DIN 1835 B/E D16 internal, p max 80 bar 67 (2.64) / / mm ('') W1200012 Drilling tool holder, Form E1 10-5 none Mounting DIN 1835 B/E D20 internal, p max 80 bar 67 (2.64) / / mm ('') W1200013 Drilling tool holder, Form E1 10-6 none Mounting DIN 1835 B/E D25 internal, p max 80 bar 71 (2.8) / / mm ('') W1200014 Drilling tool holder, Form E1 10-7 none Mounting DIN 1835 B/E D32 internal, p max 80 bar 74 (2.91) / / mm ('') W1200020 Drilling tool holder, Form E2 10-8 none Mounting D8 external and internal, p max 80 bar 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ J-1

Tool holder fix Shank VDI 25, Rear End Machining Unit Catalog page W1200015 Drilling tool holder, Form E2 10-9 none Mounting D10 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200016 Drilling tool holder, Form E2 10-10 none Mounting D12 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200042 Drilling tool holder, Specially for the marking tool WriteStar 10-11 none Mounting D12 68 (2.68) / / mm ('') W1200019 Drilling tool holder, Form E2 10-12 none Mounting D16 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200033 Drilling tool holder, Form E2 10-13 none Mounting D20 external and internal, p max 80 bar 50 (1.97) / / mm ('') W1200018 Drilling tool holder, Form E2 10-14 none Mounting D25 external and internal, p max 80 bar 60 (2.36) / / mm ('') W9990095 Compensation bushing 10-15 none Mounting D3/4'' 6 (0.24) / / mm ('') For more information see http://infoshop.index-werke.de/ J-2

Tool holder fix Shank VDI 25, Rear End Machining Unit Catalog page W1200007 Tapping tool holder, extendable 10-16 none Mounting DIN 1835 B/E D18 external, p max 20 bar 50 (1.97) / / mm ('') W1200028 Reaming tool holder 10-17 none Mounting ER 16 external, p max 20 bar 63 (2.48) / / mm ('') W1200030 Broaching/ Slotting tool holder, rotating, live 10-18 none Mounting D12 external, p max 20 bar 60 (2.36) / / mm ('') W1200027 Calibrating tool 10-19 none Mounting 190 (7.48) / / mm ('') For more information see http://infoshop.index-werke.de/ J-3

Tool holder live Shank VDI 25, Rear End Machining Unit Catalog page W1205023 Drilling unit 11-2 none Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) 54 (2.13) / / 0 mm ('') W1205021 Tapping unit, extendable 11-3 none Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) 60 (2.36) / / 0 mm ('') W1235054 Circular saw unit 11-4 Vee bar Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2,7:1 (2,7) 68 (2.68) / / 0 mm ('') For more information see http://infoshop.index-werke.de/ K-1

Tool holder fix Shank 1", Rear End Machining Unit Catalog page W6290001 Drilling tool holder 12-2 none Mounting ER 25 22 (0.87) / / mm ('') W6290020 Drilling tool holder 12-3 none Mounting ER 25 internal, p max 40 bar 50 (1.97) / / 0 mm ('') W6290019 Drilling tool holder 12-4 none Mounting DIN 1835 B/E D25 internal, p max 40 bar 56 (2.2) / / 0 mm ('') W6290018 Drilling tool holder, adjustable 12-5 none Mounting D18 internal, p max 20 bar 56 (2.2) / ±2 (±08) / ±2 (08) mm ('') W6290000 Drilling tool holder 12-6 none Mounting D25 40 (1.57) / / mm ('') W6290015 Drilling tool holder 12-7 none Mounting MK1 16 (0.63) / / mm ('') W6290016 Drilling tool holder 12-8 none Mounting MK2 29 (1.14) / / mm ('') For more information see http://infoshop.index-werke.de/ L-1

Tool holder fix Shank 1", Rear End Machining Unit Catalog page W6290008 Center holder, elastic, live 12-9 none Mounting D18 72.5 (2.85) / / mm ('') W6290007 Center holder, elastic, live 12-10 none Mounting MK1 72.5 (2.85) / / mm ('') W6290002 Tapping tool holder, extendable 12-11 none Mounting D25 52 (25) / / mm ('') W6290003 Tapping tool holder, over-running 12-12 none Mounting D25 56 (2.2) / / mm ('') W6290005 Reaming tool holder, adjustable 12-13 none Mounting ER 25 55 (2.17) / / mm ('') W6290006 Reaming tool holder, adjustable 12-14 none Mounting D18 41 (1.61) / / mm ('') W6290011 Broaching/ Slotting tool holder, rotating, live 12-15 none Mounting D12 58 (2.28) / / mm ('') For more information see http://infoshop.index-werke.de/ L-2

Tool holder fix Shank 1", Rear End Machining Unit Catalog page W6290012 Broaching/ Slotting tool holder, rotating, live 12-16 none Mounting D20 76 (2.99) / / mm ('') W6290010 Broaching/ Slotting tool holder, rotating, live 12-17 none Mounting D30 78-88 (37-3.46) / / mm ('') W6290009 Broaching/ Slotting tool holder 12-18 none Mounting D50 80-90 (3.2-3.54) / / mm ('') W6290017 Guide holder 12-19 none Mounting 57 (2.24) / / mm ('') W9990176 Roller holding block, adjustable 12-20 Mounting / / mm ('') W9990177 Roller holding block, adjustable 12-21 Mounting / / mm ('') W6290004 Knurling tool holder, adjustable 12-22 none Mounting D6-36 / / mm ('') For more information see http://infoshop.index-werke.de/ L-3

Tool holder live Shank 1", Rear End Machining Unit Catalog page W6295001 Drilling unit 13-2 none Mounting ER 25 external, p max 40 bar Speed ratio 1:1 (1) 68 (2.68) / / 0 mm ('') W6295000 Tapping unit, extendable 13-3 none Mounting ER 16 external, p max 40 bar Speed ratio 1:1 (1) 61 (2.4) / / 0 mm ('') W6295002 Circular saw unit 13-4 none Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2,7:1 (2,7) 75 (2.95) / ±12.5 (±0.49) / 0 mm ('') For more information see http://infoshop.index-werke.de/ M-1

Accessories INDEX ABC Catalog page W67501.2050 IC Attachment 14-2 for internal cooling lubricant supply, 20 bar W67500.5044 IC Attachment 14-3 for internal cooling lubricant supply, 20 bar W31400.46 Steel Block 14-4 for form cutting tool W67101.0050 Setting gauge 14-5 W9990241 Turning tool holder 14-6 W9990997 Locking plate 14-7 AZ4005.03 Replacement Seals for Tool Shank 14-8 For more information, visit http://infoshop.index-werke.de/ Z-1

Accessories INDEX ABC Catalog page AZ4019.00 Sealing Washer and Mounting Pin 14-9 For more information, visit http://infoshop.index-werke.de/ Z-2

Product notes Catalog page W9800001EN Product note 15-2 External/internal cooling lubricant supply Drill holder with cylindrical shank tool mounting Offset set screws W9800004EN Product note 15-3 Writestar W9800005EN Product note 15-4 External/internal cooling lubricant supply Drill holder with collet chuck Offset set srew For more information, visit http://infoshop.index-werke.de/ Z-3

Technical Information INDEX ABC For more information, visit http://infoshop.index-werke.de/ 1-1

Technical Information INDEX ABC Warranty When using tool holders that have not been set, checked and labeled accordingly by INDEX TRAUB, warranty is not applicable to the tool drive. Information on wear parts Tool holders and guide bushings are wear parts requiring correct handling. In order to ensure a long service life, compressed air or coolant must not enter the gap seals of the holders or of the guide bushings. Inspection of live tool holders and guide bushings Tool holders and guide bushings must be inspected at regular intervals (at least twice a year) for smooth running and play. The drive pinion and drive clutch of the live tool holders must be subjected to a visual inspection for damage or wear. If one of the above-mentioned defects is detected during the inspection of the tool holders or guide bushings, they must be returned immediately for preventive maintenance or repair to the following address: TRAUB Drehmaschinen GmbH & Co. KG Hauffstrasse 4 D-73262 Reichenbach, Germany Phone +49 (0) 7153 502-554 werkzeughalter@traub.de For more information, visit http://infoshop.index-werke.de/ 1-2

Technical Information INDEX ABC Tool holders with cooling lubricant supply Tool holders marked with this symbol must be operated with cooling lubricant (no dry run permitted). Tool holders marked with this symbol must be operated with cooling lubricant when converting from external cooling lubricant supply to internal cooling lubricant supply. Observe dry run capability of IC attachment! lubricant filtering When using live tool holders with internal cooling lubricant supply, it is necessary to use a cooling lubricant filter system with a retained particle size 50 μ. Cleaning live tool holders Live tool holders must never be immersed in cleaning fluid since mixing the cleaning fluid with the bearing grease will reduce the service life of the tool holders. Speed ratio specifications on tool holders The value to be programmed is specified in the documentation and on the live tool holders ( = the input in the NC program). n prog = n tool x i n tool = speed at cutting tool edge n PROG = speed to be programmed i = speed ratio in the tool holder This means: the speed increase or speed reduction is not specified as a fraction but as a number. This gives speed increase ratios as numbers smaller than 1. Example: i = 0.333 (corresponds to i = 1:3) i = 0.676 (corresponds to i = 1:1.48) Step-down ratios result in numbers >1 For example: i = 2 (corresponds to i = 2:1) i = 1.333 (corresponds to i = 4:3) For more information, visit http://infoshop.index-werke.de/ 1-3

Technical Information INDEX ABC Direction of rotation specification Definition of the viewing direction. Viewing direction for determining the direction of rotation is always from behind (that is, from the drive direction) toward the shaft. On the machine side, the direction of rotation has been set by parameters such that M03 always denotes clockwise rotation and M04 counterclockwise run at the interface of the drive pinion of the tool holder. The direction of rotation given on the holder thus always refers to a "change in direction within a holder". M03 and M04 are machine functions to be programmed. The and arrows indicate the direction of rotation of the cutting edges. M03 M04 M04 M03 This means: No reversal of direction of rotation When the holder drive shaft has the same direction of rotation as the tool cutting edge, the clockwise direction of run must be specified by M03 (clockwise rotation). Accordingly, counter-clockwise run must be specified by M04. Reversal of direction of rotation When the holder drive shaft has the opposite direction of rotation as the tool cutting edge, the clockwise direction of rotation must be specified by M04. Accordingly, counter-clockwise run must be specified by M03. Example No reversal of direction of rotation M03 M04 For more information, visit http://infoshop.index-werke.de/ 1-4

Technical Information INDEX ABC Tightening torque The gaskets on the tool shank and the coolant bushing must be regularly checked for damages. The tightening torques of the clamping pieces to the tool holder mounting depends on the shank diameter of the tool holder. Shank size Ø 20mm Ø 25mm Ø 30mm Ø 40mm Tightening torque 8 Nm 20 Nm 25 Nm 40 Nm Replacement seals for tool shank See the accessories. The gaskets on the tool shank and the coolant bushing must be regularly checked for damages. Sealing air port It must be ensured on all machines with sealing air ports that the sealing air ports in the tool carrier and in the tool holders are sealed/ closed with M5x6 mm set screws. For more information, visit http://infoshop.index-werke.de/ 1-5

Technical Information INDEX ABC Tool holders with fixation Except for very few cases, all tool holders have been preadjusted with high precision and sealed with the INDEX V bar / TRAUB adjusting bar / W-serration. This setting must not be changed. The INDEX V bar / TRAUB adjusting bar / W-serration ensures positional accuracy of the tool when re-inserted. The tool holders are fixed around the shank axis by pins (DIN 69880). DIN holders can be used. Double serration of the tool holders allows several uses. High-pressure unit The cooling lubricant up to 80 bar (e.g., for deep-hole drilling) is supplied through the standard cooling lubricant line. Load limits of live tools The drive power and torques are indicated in the performance charts. These values represent the upper limit of the calculated theoretical performance values (average values). In case of interrupted cuts, e.g., for milling, the load peaks occurring when the cutting edge enters the material may be much higher than the theoretical torque according to the performance chart. The cutter should be selected so that a cutting edge is constantly being used for cutting during the machining process. For more information, visit http://infoshop.index-werke.de/ 1-6

Technical Information INDEX ABC Live tool holders Only the tool located in the working position is live. The live tool holders are inserted into the mounting bores in the tool carriers just like non-live tool holders. Each turret station can accept one live tool. The motor drives the tool that is exclusively in working position. In addition, the index drive is actuated by switching using the same motor. The sealing washer (1) must be removed first. For a list of sealing washers, see drawing AZ4019.00 in Chapter Accessories. 1 Sealing washer 2 Blanking plug Before using the machine, make sure that all mounting bores without a tool have been closed with a sealing washer and that the gasket on all tool holders is not damaged. Any mounting bores not used must be closed with blanking plugs during machining processes. For more information, visit http://infoshop.index-werke.de/ 1-7

Technical Information INDEX ABC Weight distribution on turret head Tool holders may have considerably different weights depending on their function and equipment. Therefore, be sure to balance the tool holders evenly around the turret head when tooling. Collision After a collision has occurred, check whether the tool carrier has been displaced. If this is the case, the tool carrier must be realigned to ensure that the drive and tool holder gears accurately engage with each other. Tool change on live tool holders To avoid damaging or changing the adjustment of the drive train in the turret, tools must not be changed on the live tool holders inserted in the turret. Tools in live tool holders must be changed outside the machine. For more information, visit http://infoshop.index-werke.de/ 1-8

Technical Information INDEX ABC Information on how to use the chart when using tool holders The chart relates to the output speed n of the tool unit. The tool speed can be read directly from the chart only if the internal speed ratio i in the tool holder is 1:1. For tool holders (VDI holders) with an internal speed ratio i 1, the output speed n of the tool unit to be programmed must be calculated from the required tool speed and the speed ratio i. Afterwards, the actual powers or torques can be read off or determined. Example (at 100% duty cycle): live tool unit, tool speed n Tool = 1000 rpm Internal speed ratio i of the tool holder Programmed speed n prog for the drive of the unit Torque M Tool at the output of the tool holder Power P at the output of the tool holder Power P at the output of the setup i = 4 n prog = n Tool x i = 1000 rpm x 4 = 4000 rpm Read-out M d at speed n prog = 4000 rpm = 1.6 Nm M d = M Tool : i Formula changed: M Tool = M d x i = 1.6 Nm x 4 = 6.4 Nm Read-out at 4000 rpm > P = 0.67 kw calculated: P = 2 x π x n prog x M d P = 2 x π x 4000 x 1.6 Nm = 0.67 kw 60 x 1000 2.5 1.0 Torque Md at output of unit (Nm) 2.0 1.6 1.5 1.0 0.5 0.0 Md P 0.8 0.674 0.6 0.0 0 1000 2000 3000 4000 5000 6000 0.4 0.2 Power P (kw) Speed n 1 at output of unit (rpm) The speed ratio and the technical data of each tool holder are indicated on the next pages. For more information, visit http://infoshop.index-werke.de/ 1-9

For more information, visit http://infoshop.index-werke.de/ 1-10

Usage Information INDEX ABC For more information, visit http://infoshop.index-werke.de/ 2-1

Structure of the INDEX ABC Tool mounting VDI 25 4 3 1 5 2 1 Tool carrier 1 XZ 2 Tool carrier 2 XZ 3 Synchronous spindle 4 Rear End Machining Unit 5 Main spindle For more information, visit http://infoshop.index-werke.de/ 2-2

Work area INDEX ABC Tool mounting VDI 25 Tool carrier 1 Rear End Machining Units Main spindle Tool carrier 2 For more information, visit http://infoshop.index-werke.de/ 2-3

Work area INDEX ABC Tool mounting VDI 25 Rear End Machining Units Tool carrier 1 Main spindle Tool carrier 2 For more information, visit http://infoshop.index-werke.de/ 2-4

KL9652.70351 Performance chart Driven tools, Tool carrier 1 Speed range 0-4500min -1 Torque Md at output of unit (Nm) Power P (kw) Speed n 1 at output of unit (rpm) For more information, visit http://infoshop.index-werke.de/ 2-5

KL9652.40021 Performance chart Driven tools, Tool carrier 2 Speed range 0-6000min -1 Torque Md at output of unit (Nm) Power P (kw) Speed n 1 at output of unit (rpm) For more information, visit http://infoshop.index-werke.de/ 2-6

Tool holder fix Shank VDI 25 For more information, visit http://infoshop.index-werke.de/ 3-1

W1200039 Bar stop, live Shank VDI 25 none Mounting D25 reversable 180 yes 70 (2.76) / / 30 (1.18) mm ('') Matching modules Bar stop Bar stop W9990159 W9990160 For more information see http://infoshop.index-werke.de/ 3-2

W9990159 Bar stop, live Shank Mounting D58 / / 30 (1.18) mm ('') Matching base holder Bar stop Bar stop Bar stop Bar stop Bar stop Bar stop W1100008 W1200039 W1400035 W1300052 W1300054 W1200040 For more information see http://infoshop.index-werke.de/ 3-3

W9990160 Bar stop, live Shank Mounting D85 / / 30 (1.18) mm ('') Matching base holder Bar stop Bar stop Bar stop Bar stop Bar stop Bar stop W1100008 W1200039 W1400035 W1300052 W1300054 W1200040 For more information see http://infoshop.index-werke.de/ 3-4

W1230000 Compensation holder Shank VDI 25 Vee bar Mounting VDI 20 external and internal, p max 20 bar reversable 180 yes 70 (2.76) / / 2 (0.8) mm ('') Matching accessories Nozzle* 474550.0101 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-5

W1230035 Compensation holder Shank VDI 25 Vee bar Mounting VDI 20 external and internal, p max 40 bar reversable 180 no 60 (2.36) / / 2 (0.8) mm ('') Matching accessories Nozzle* 474550.0101 * This article is included For more information see http://infoshop.index-werke.de/ 3-6

W1230027 Compensation holder Shank VDI 25 Vee bar Mounting VDI 25 internal, p max 80 bar reversable 180 yes 70 (2.76) / / 2 (0.8) mm ('') For more information see http://infoshop.index-werke.de/ 3-7

W1230003 Compensation holder Shank VDI 25 Vee bar Mounting VDI 30 internal, p max 80 bar reversable 180 no 60 (2.36) / / 3 (0.12) mm ('') For more information see http://infoshop.index-werke.de/ 3-8

W1230026 Compensation holder Shank VDI 25 Vee bar Mounting VDI 30 internal, p max 80 bar reversable 180 yes 70 (2.76) / / -5 (-0.2) mm ('') For more information see http://infoshop.index-werke.de/ 3-9

W1230025 Compensation holder Shank VDI 25 Vee bar Mounting D1'' external, p max 80 bar reversable 180 yes 60 (2.36) / / 15 (0.59) mm ('') Matching accessories Screw cap* 471672.08 Tube* W63451.1004 * This article is included For more information see http://infoshop.index-werke.de/ 3-10

W1200042 Drilling tool holder, Specially for the marking tool WriteStar Shank VDI 25 none Mounting D12 reversable 180 no 68 (2.68) / / mm ('') Matching cutting tools Marking tool Other documents Product note W9990300 W9800004en For more information see http://infoshop.index-werke.de/ 3-11

W1230036 Drilling tool holder Shank VDI 25 Vee bar Mounting ER 16 external, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Clamping collet 901930.1--- Clamping collet W99903-- tapping tool collet 3230-- tapping tool collet WZ9990.9506F Collet chuck W999066- Clamping nut* 901939.01 Clamping bar W61100.0004 Setting gauge W67101.0050 Stop bar W67221.4106 Cheese-head screw 410260.0616 Spanner 490219.0161 * This article is included For more information see http://infoshop.index-werke.de/ 3-12

W1230054 Drilling tool holder Shank VDI 25 Vee bar Mounting ER 25 external and internal, p max 80 bar reversable 180 yes 60 (2.36) / / 31 (1.22) mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 Other documents Product note W9800005en * This article is included For more information see http://infoshop.index-werke.de/ 3-13

W1230056 Drilling tool holder Shank VDI 25 Vee bar Mounting ER 25 external and internal, p max 80 bar reversable 180 yes 70 (2.76) / / 31 (1.22) mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Coolant nozzle* W00019.0153 Tube* W67500.3206 Spanner 490219.0251 Other documents Product note W9800005en * This article is included For more information see http://infoshop.index-werke.de/ 3-14

W1230055 Drilling tool holder Shank VDI 25 Vee bar Mounting ER 32 external and internal, p max 80 bar reversable 180 yes 60 (2.36) / / 52 (25) mm ('') Matching accessories Clamping collet 901930.6--- tapping tool collet 3242-- tapping tool collet WZ9990.9509F Collet chuck W999068- Clamping nut* 901939.0321 Spanner 490219.0321 Other documents Product note W9800005en * This article is included For more information see http://infoshop.index-werke.de/ 3-15

W1230007 Drilling tool holder, vertically adjustable Shank VDI 25 Vee bar Mounting DIN 1835 B/E D16 internal, p max 80 bar reversable 180 no 70 (2.76) / / 25 (0.98) mm ('') Matching accessories Bush W67511.04-- For more information see http://infoshop.index-werke.de/ 3-16

W1230046 Drilling tool holder Shank VDI 25 Vee bar Mounting DIN 1835 B/E D32 external and internal, p max 80 bar reversable 180 yes 60 (2.36) / / 30 (1.18) mm ('') Matching accessories Bush W63220.02-- Bush W63221.40-- Nozzle* W67500.3208 Bush* W67530.0824 Hollow screw* W67530.0818 Nozzle W00019.0216 Other documents Product note W9800001en * This article is included For more information see http://infoshop.index-werke.de/ 3-17

W1230006 Drilling tool holder Shank VDI 25 Vee bar Mounting ER 40 external and internal, p max 40 bar reversable 180 yes 70 (2.76) / / 55 (2.17) mm ('') Matching accessories Clamping collet 901930.4--- Clamping nut* 901939.0401 Nozzle* 474550.0121 Cheese-head screw* 410243.0406 Spanner 490219.0401 * This article is included For more information see http://infoshop.index-werke.de/ 3-18

W1230032 Drilling tool holder Shank VDI 25 Vee bar Mounting D12 external and internal, p max 20 bar reversable 180 no 70 (2.76) / / 30 (1.18) mm ('') Matching accessories Nozzle* 474550.0101 Metal sheet* W67222.4108 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-19

W1210001 Drilling tool holder, vertically adjustable Shank VDI 25 Setting gauge Mounting D16 internal, p max 80 bar reversable 180 no 60 (2.36) / ±1.5 (±06) / 30 (1.18) mm ('') For more information see http://infoshop.index-werke.de/ 3-20

W1200000 Turning tool holder, Form C1/C4 Shank VDI 25 none Mounting square 16x16 external, p max 20 bar reversable 180 yes 55 (2.17) / / 19 (0.75) mm ('') Matching accessories Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-21

W1200003 Turning tool holder, Form C2/C3 Shank VDI 25 none Mounting square 16x16 external, p max 20 bar reversable 180 yes 55 (2.17) / / 19 (0.75) mm ('') Matching accessories Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-22

W1200001 Turning tool holder, Form C1/C4 Shank VDI 25 none Mounting square 20x20 external, p max 20 bar reversable 180 yes 55 (2.17) / / 15 (0.59) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-23

W1200004 Turning tool holder, Form C2/C3 Shank VDI 25 none Mounting square 20x20 external, p max 20 bar reversable 180 yes 55 (2.17) / / 19 (0.75) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-24

W1200025 Turning tool holder, double Shank VDI 25 none Mounting square 20x20 external, p max 20 bar reversable 180 no 55 (2.17) / / 17 (0.67) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* W67500.3208 Countersunk screw* 410360.0410 Nozzle W00019.0216 * This article is included For more information see http://infoshop.index-werke.de/ 3-25

W1200021 Turning tool holder, Form C2/C3 Shank VDI 25 none Mounting square 3/4x3/4'' internal, p max 20 bar reversable 180 yes 55 (2.17) / / 19 (0.75) mm ('') Matching accessories Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-26

W1200022 Turning tool holder, Form C1/C4 Shank VDI 25 none Mounting square 3/4x3/4'' internal, p max 20 bar reversable 180 yes 55 (2.17) / / 15 (0.59) mm ('') Matching accessories Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-27

W1220007 Turning tool holder Shank VDI 25 Clamping and stop bar Mounting square 20x20 external, p max 80 bar reversable 180 yes 40 (1.57) / / 30 (1.18) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* W67500.3208 Bush* W67530.0824 Hollow screw* W67530.0818 Nozzle W00019.0216 * This article is included For more information see http://infoshop.index-werke.de/ 3-28

W1230016 Turning tool holder Shank VDI 25 Vee bar Mounting square 20x20 external, p max 40 bar reversable 180 no 18.5 (0.73) / / 30 (1.18) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* W67500.3208 Countersunk screw* 410360.0410 * This article is included For more information see http://infoshop.index-werke.de/ 3-29

W1230021 Turning tool holder Shank VDI 25 Vee bar Mounting square 20x20 external, p max 40 bar reversable 180 no 60 (2.36) / / 30 (1.18) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* W67500.3208 Countersunk screw* 410360.0410 Gib W67221.4104 Stop bar W67221.4106 * This article is included For more information see http://infoshop.index-werke.de/ 3-30

W1230029 Turning tool holder Shank VDI 25 Vee bar Mounting square 20x20 external, p max 80 bar reversable 180 yes 18.5 (0.73) / / 30 (1.18) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* W67500.3208 Countersunk screw* 410360.0510 Nozzle W00019.0216 * This article is included For more information see http://infoshop.index-werke.de/ 3-31

W1230031 Turning tool holder Shank VDI 25 Vee bar Mounting square 20x20 external, p max 80 bar reversable 180 yes 60 (2.36) / / 30 (1.18) mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* W67500.3208 Bush* W67530.0824 Hollow screw* W67530.0818 Nozzle W00019.0216 * This article is included For more information see http://infoshop.index-werke.de/ 3-32

W1230020 Basic holder, vertically adjustable Shank VDI 25 Vee bar Mounting external and internal, p max 20 bar reversable 180 yes 35 (1.38) / / 5 (0.2) mm ('') Matching modules Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Knurling tool holder W9990038 W9990039 W9990064 W9990066 W9990067 W9990068 W9990069 W9990070 W9990071 W9990072 W9990073 W9990074 W9990075 W9990076 W9990154 Matching accessories Tube* W67311.0810 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 3-33

W9990038 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-34

W9990039 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-35

W9990064 Grooving tool holding block, vertically adjustable Shank Mounting square 16x16 40 (1.57) / / 40 (1.57) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1230020 W1250022 W8900013 W1350009 W1330004 For more information see http://infoshop.index-werke.de/ 3-36

W9990066 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-37

W9990067 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-38

W9990068 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-39

W9990069 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-40

W9990070 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-41

W9990071 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 32x5, p max 20 bar 60 (2.36) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-42

W9990072 Grooving tool holding block, vertically adjustable Shank Mounting square 16x16 20 (0.79) / / 17 (0.67) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-43

W9990073 Grooving tool holding block, vertically adjustable Shank Mounting square 16x10 20 (0.79) / / 18 (0.71) mm ('') Matching base holder Basic holder Basic holder Basic holder W8900013 W1230020 W1250022 For more information see http://infoshop.index-werke.de/ 3-44

W9990074 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 16x3 20 (0.79) / / 25 (0.98) mm ('') Matching base holder Basic holder Basic holder Basic holder W8900013 W1230020 W1250022 For more information see http://infoshop.index-werke.de/ 3-45

W9990075 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 20x4 20 (0.79) / / 25 (0.98) mm ('') Matching base holder Basic holder Basic holder Basic holder W8900013 W1230020 W1250022 For more information see http://infoshop.index-werke.de/ 3-46

W9990076 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 20 (0.79) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 3-47

W9990154 Knurling tool holder Shank none Mounting D6 38 (1.5) / / 20 (0.79) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Matching cutting tools W1330004 W8900013 W1230020 W1250022 Knurl 22191-.21-- For more information see http://infoshop.index-werke.de/ 3-48

W1230004 Basic holder Shank VDI 25 Vee bar Mounting external and internal, p max 20 bar reversable 180 yes 70 (2.76) / / -5 (-0.2) mm ('') Matching modules Drill holding block Drill holding block Matching accessories W9990085 W9990086 Nozzle* 474550.0101 Washer* 419010.04 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 3-49

W9990085 Drill holding block Shank Mounting ER 25 internal, p max 20 bar 42.5 (1.67) / / mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder Matching accessories W1210000 W1330002 W1230004 W1100002 W1220011 Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 3-50

W9990086 Drill holding block Shank Mounting D20 external, p max 20 bar 40 (1.57) / / mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder Matching accessories W1210000 W1330002 W1230004 W1100002 W1220011 Bush W62220.01-- Nozzle* 474550.0101 * This article is included For more information see http://infoshop.index-werke.de/ 3-51

W1200008 Scroll holder Shank VDI 25 none Mounting internal, p max 20 bar reversable 180 yes 65 (2.56) / / 40.5 (1.59) mm ('') Matching accessories Embossing roller* W63380.0030 Embossing roller W63380.0060 Coolant required for function * This article is included For more information see http://infoshop.index-werke.de/ 3-52

W1200036 Calibrating tool Shank VDI 25 none Mounting reversable 180 no 110 (4.33) / / mm ('') For more information see http://infoshop.index-werke.de/ 3-53

W1200009 Blanking plug Shank VDI 25 Mounting reversable 180 no 10 (0.39) / / mm ('') For more information see http://infoshop.index-werke.de/ 3-54

W1200026 Coolant nozzle Shank VDI 25 none Mounting reversable 180 no 16 (0.63) / / mm ('') Matching accessories Nozzle* W67500.3208 Countersunk screw* 410360.0408 Nozzle W00019.0216 * This article is included For more information see http://infoshop.index-werke.de/ 3-55

For more information, visit http://infoshop.index-werke.de/ 3-2

Tool holder live Shank VDI 25 For more information, visit http://infoshop.index-werke.de/ 4-1

W1235047 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting ER 11 external, p max 20 bar Speed ratio 1:3 (0.333) Direction same as drive direction reversable 180 yes 75 (2.95) / / 15 (0.59) mm ('') Matching accessories Clamping collet 901930.0--- tapping tool collet 3239-- tapping tool collet 900288 Collet chuck W999064- Clamping nut* 901939.5111 Nozzle* 474550.0121 Setting gauge W67101.0050 Clamping bar W61100.0004 Stop bar W67221.4106 Cheese-head screw 410260.0616 Spanner 490219.3111 * This article is included For more information see http://infoshop.index-werke.de/ 4-2

W1235049 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting ER 11 external, p max 20 bar Speed ratio 1:1.33 (0.75) Direction opposite to drive direction reversable 180 yes 70 (2.76) / / 17.5 (0.69) mm ('') Matching accessories Clamping collet 901930.0--- tapping tool collet 3239-- tapping tool collet 900288 Collet chuck W999064- Clamping nut* 322438 Nozzle* W67500.3208 Bush* W67530.0824 Hollow screw* W67530.0818 Nozzle W00019.0216 Spanner 490219.0111 * This article is included For more information see http://infoshop.index-werke.de/ 4-3

W1205022 Drilling unit Shank VDI 25 none Drive Beveled wheel (ABC) Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 54 (2.13) / / 0 mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping nut* 901939.5201 Tube* W67501.0020 Countersunk screw* 410360.0412 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 4-4

W1205025 Milling unit Shank VDI 25 none Drive Beveled wheel (ABC) Mounting D16 external, p max 40 bar Speed ratio 4.5:1 (4.5) Direction same as drive direction reversable 180 no 82 (3.23) / / 0 mm ('') Matching accessories Bush W67511.04-- Tube* W67501.0020 Countersunk screw* 410360.0410 * This article is included For more information see http://infoshop.index-werke.de/ 4-5

W1225010 Milling unit Shank VDI 25 Clamping and stop bar Drive Beveled wheel (ABC) Mounting Milling tool mounting D22 external, p max 20 bar Speed ratio 2:1 (2) Direction opposite to drive direction reversable 180 no 74 (2.91) / / 45 (1.77) mm ('') Matching accessories Ring 251390.---- Ring 251391.---- Screw* 250122.1028 Nozzle* 474550.0121 Cheese-head screw* 410243.0408 mill arbor wrench 203020.1220 Hook wrench 490340.0500 * This article is included For more information see http://infoshop.index-werke.de/ 4-6

W1205018 Tapping unit, extendable Shank VDI 25 none Drive Beveled wheel (ABC) Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 60 (2.36) / / 0 mm ('') Matching accessories Clamping collet 901930.2--- Collet chuck W999066- Clamping nut* 901939.5201 Driver W67451.0075 Tube* W67501.0020 Countersunk screw* 410360.0410 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 4-7

W1235053 Circular saw unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2,7:1 (2,7) Direction same as drive direction reversable 180 no 68 (2.68) / / 0 mm ('') Matching cutting tools Saw blade 223010.63-- Matching accessories Ring 251390.---- Ring 251391.---- Tube* W67501.0020 Countersunk screw* 410360.0410 Bush W92853.2050 Bush W92853.2060 Bush W61851.0050 Bush* WK7850.22 Gib W61851.0004 * This article is included For more information see http://infoshop.index-werke.de/ 4-8

W1235045 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting ER 20 external, p max 20 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 yes 70 (2.76) / / 53 (29) mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping nut* 901939.5201 Nozzle* 474550.0101 Cheese-head screw* 410243.0406 Setting gauge W67101.0050 Clamping bar W61100.0004 Stop bar W67221.4106 Gib W67212.2504 Cheese-head screw 410260.0616 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 4-9

W1235046 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting ER 20 external, p max 20 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 60 (2.36) / / 53 (29) mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping nut* 901939.5201 Nozzle* 474550.0101 Cheese-head screw* 410243.0406 Setting gauge W67101.0050 Clamping bar W61100.0004 Stop bar W67221.4106 Gib W67212.2504 Cheese-head screw 410260.0616 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 4-10

W1235058 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting ER 20 external, internal optional, p max 20 bar Speed ratio 2:1 (2) Direction same as drive direction reversable 180 yes 70 (2.76) / / 53 (29) mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping collet, sealed W999084- Clamping nut* 901939.5201 Adapter for Internal cooling W67501.2050 Nozzle* 474550.0101 Cheese-head screw* 410243.0406 Setting gauge W67101.0050 Clamping bar W61100.0004 Stop bar W67221.4106 Gib W67212.2504 Cheese-head screw 410260.0616 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 4-11

W1235042 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting DIN 1835 E D16 internal, p max 40 bar Speed ratio 1:2 (0.5) Direction same as drive direction reversable 180 yes 60 (2.36) / / 79 (3.11) mm ('') Matching accessories Bush W67511.04-- Gib W67503.2004 No dry run. For more information see http://infoshop.index-werke.de/ 4-12

W1235044 Milling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting D10 external, p max 40 bar Speed ratio 2.09:1 (2.09) Direction opposite to drive direction reversable 180 yes 55 (2.17) / / 55 (2.17) mm ('') Matching modules Milling cutter holding block Milling cutter holding block Milling cutter holding block Milling cutter holding block Milling cutter holding block Matching accessories W9990040 W9990041 W9990042 W9990043 W9990044 Tube* W95060.4012 Countersunk screw* 410360.0512 Setting gauge W67101.0050 Clamping bar W61100.0004 Stop bar W67221.4106 Cheese-head screw 410260.0616 * This article is included For more information see http://infoshop.index-werke.de/ 4-13

W1235052 Milling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2.09:1 (2.09) Direction opposite to drive direction reversable 180 yes 55 (2.17) / / 47.5 (1.87) mm ('') Matching accessories Ring 251390.---- Ring 251391.---- Tube* W95060.4012 Countersunk screw* 410360.0512 Spindle W68831.9030 Setting gauge W67101.0050 Clamping bar W61100.0004 Stop bar W67221.4106 Cheese-head screw 410260.0616 Hook wrench 490340.0300 * This article is included For more information see http://infoshop.index-werke.de/ 4-14

W1225008 Tapping unit, extendable Shank VDI 25 Clamping and stop bar Drive Beveled wheel (ABC) Mounting ER 20 external, p max 40 bar Speed ratio 2:1 (2) Direction opposite to drive direction reversable 180 no 70 (2.76) / / 78 (37) mm ('') Matching accessories Clamping collet 901930.2--- Collet chuck W999066- Clamping nut* 901939.5201 Driver W67451.00-- Nozzle W00019.0216 Nozzle* W67500.3208 Tube* W67500.3206 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 4-15

W1235051 Broaching/ Slotting unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting D20 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 60 (2.36) / / 75 (2.95) mm ('') Matching cutting tools Mandrel Matching accessories W37606.---- Bush W37610.2012 Tube* WK5102.10 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 4-16

W1235050 Drilling unit Shank VDI 25 Vee bar Drive Beveled wheel (ABC) Mounting ER 11 external, p max 40 bar Speed ratio 1:1.7 (0.588) Direction opposite to drive direction reversable 180 no 44 (1.73) / / 37 (1.46) mm ('') Matching accessories Clamping collet 901930.0--- tapping tool collet 3239-- tapping tool collet 900288 Collet chuck W999064- Clamping nut* 901939.5111 Tube* W67500.3206 Spanner 490219.3111 Spanner W61511.5072 * This article is included For more information see http://infoshop.index-werke.de/ 4-17

W9990040 Milling cutter holding block Shank Mounting Milling tool mounting D13 / / mm ('') Matching base holder Milling attachment G728419-02 Milling cutter holder W2400027 Milling unit W1205010 Milling unit W1205042 Milling unit W1235039 Milling unit W1235044 Milling unit W1255015 Milling unit W1255134 Milling unit W1305002 Milling unit W1305007 Milling unit W1305010 Milling unit W1305025 Milling unit W1305034 Milling unit W1325000 Milling unit W1335004 Holder W1335012 Milling unit W1345005 Milling unit W1345012 Milling unit W1345013 Milling unit W1345082 Circular saw unit W1345109 Milling unit W1355001 Milling unit W1405003 Milling unit W1405013 Milling unit W1435005 Circular saw unit W1445005 Milling unit W1445006 Milling unit W1455011 Milling unit W1155007 Matching accessories Ring 251390.---- Ring 251391.---- Screw 250122.0617 mill arbor wrench 203020.1130 For more information see http://infoshop.index-werke.de/ 4-18

W9990041 Milling cutter holding block Shank Mounting Milling tool mounting D16 / / mm ('') Matching base holder Milling unit W1345048 Milling cutter holder W2400027 Milling unit W1205010 Milling unit W1205042 Milling unit W1235039 Milling unit W1235044 Milling unit W1255015 Milling unit W1255134 Milling unit W1305002 Milling unit W1305007 Milling unit W1305010 Milling unit W1305025 Milling unit W1305034 Milling unit W1325000 Milling unit W1335004 Holder W1335012 Milling unit W1345005 Milling unit W1345012 Milling unit W1345013 Milling unit W1345082 Circular saw unit W1345109 Milling unit W1355001 Milling unit W1405003 Milling unit W1405013 Milling unit W1435005 Circular saw unit W1445005 Milling unit W1445006 Milling unit W1455011 Milling attachment G728419-02 Milling unit W1155007 Matching accessories Ring 251390.---- Ring 251391.---- Screw 250122.0820 mill arbor wrench 203020.1160 For more information see http://infoshop.index-werke.de/ 4-19

W9990042 Milling cutter holding block Shank Mounting Milling tool mounting D22 / / mm ('') Matching base holder Milling unit W1345048 Milling cutter holder W2400027 Milling unit W1205010 Milling unit W1205042 Milling unit W1235039 Milling unit W1235044 Milling unit W1255015 Milling unit W1255134 Milling unit W1305002 Milling unit W1305007 Milling unit W1305010 Milling unit W1305025 Milling unit W1305034 Milling unit W1325000 Milling unit W1335004 Holder W1335012 Milling unit W1345005 Milling unit W1345012 Milling unit W1345013 Milling unit W1345082 Circular saw unit W1345109 Milling unit W1355001 Milling unit W1405003 Milling unit W1405013 Milling unit W1435005 Circular saw unit W1445005 Milling unit W1445006 Milling unit W1455011 Milling attachment G728419-02 Milling unit W1155007 Matching accessories Ring 251390.---- Ring 251391.---- Screw 250122.1028 mill arbor wrench 203020.1220 For more information see http://infoshop.index-werke.de/ 4-20

W9990043 Milling cutter holding block Shank Mounting Milling tool mounting D27 / / mm ('') Matching base holder Milling unit W1345048 Milling cutter holder W2400027 Milling unit W1205010 Milling unit W1205042 Milling unit W1235039 Milling unit W1235044 Milling unit W1255015 Milling unit W1255134 Milling unit W1305002 Milling unit W1305007 Milling unit W1305010 Milling unit W1305025 Milling unit W1305034 Milling unit W1325000 Milling unit W1335004 Holder W1335012 Milling unit W1345005 Milling unit W1345012 Milling unit W1345013 Milling unit W1345082 Circular saw unit W1345109 Milling unit W1355001 Milling unit W1405003 Milling unit W1405013 Milling unit W1435005 Circular saw unit W1445005 Milling unit W1445006 Milling unit W1455011 Milling attachment G728419-02 Milling unit W1155007 Matching accessories Ring 251390.---- Ring 251391.---- Screw 250122.1235 mill arbor wrench 203020.1270 For more information see http://infoshop.index-werke.de/ 4-21

W9990044 Milling cutter holding block Shank Mounting Milling tool mounting D32 / / mm ('') Matching base holder Milling attachment G728419-02 Milling cutter holder W2400027 Milling unit W1205010 Milling unit W1205042 Milling unit W1235039 Milling unit W1235044 Milling unit W1255015 Milling unit W1255134 Milling unit W1305002 Milling unit W1305007 Milling unit W1305010 Milling unit W1305025 Milling unit W1305034 Milling unit W1325000 Milling unit W1335004 Holder W1335012 Milling unit W1345005 Milling unit W1345012 Milling unit W1345013 Milling unit W1345082 Circular saw unit W1345109 Milling unit W1355001 Milling unit W1405003 Milling unit W1405013 Milling unit W1435005 Circular saw unit W1445005 Milling unit W1445006 Milling unit W1455011 Milling unit W1155007 Matching accessories Ring 251390.---- Ring 251391.---- Screw 250122.1642 mill arbor wrench 203020.1320 For more information see http://infoshop.index-werke.de/ 4-22

Tool holder to spring-loaded tap holder Shank VDI 20 For more information, visit http://infoshop.index-werke.de/ 5-1

W1100017 Bar stop, adjustable, live Shank VDI 20 none Mounting reversable 180 no 49.5-71.5 (1.95-2.81) / / mm ('') For more information see http://infoshop.index-werke.de/ 5-2

W1100006 Drilling tool holder Shank VDI 20 none Mounting ER 16 internal, p max 20 bar reversable 180 no 42.5 (1.67) / / mm ('') Matching accessories Clamping collet 901930.1--- Clamping collet W99903-- tapping tool collet 3230-- tapping tool collet WZ9990.9506F Collet chuck W999065- Clamping collet, sealed W999083- Clamping nut* 901939.01 Spanner 490219.0161 * This article is included For more information see http://infoshop.index-werke.de/ 5-3

W1100007 Drilling tool holder, Form E4 Shank VDI 20 none Mounting ER 25 internal, p max 80 bar reversable 180 no 51 (21) / / mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 5-4

W1100010 Drilling tool holder, Form E4 Shank VDI 20 none Mounting ER 40 internal, p max 20 bar reversable 180 no 66.5 (2.62) / / mm ('') Matching accessories Clamping collet 901930.4--- Clamping nut* 901939.0401 Spanner 490219.0401 * This article is included For more information see http://infoshop.index-werke.de/ 5-5

W1100004 Drilling tool holder, Form E1 Shank VDI 20 none Mounting DIN 1835 B/E D20 internal, p max 20 bar reversable 180 no 48 (1.89) / / mm ('') Matching accessories Bush W68510.04-- For more information see http://infoshop.index-werke.de/ 5-6

W1100005 Drilling tool holder, Form E1 Shank VDI 20 none Mounting DIN 1835 B/E D25 internal, p max 80 bar reversable 180 no 56.5 (2.22) / / mm ('') Matching accessories Bush W62221.41-- For more information see http://infoshop.index-werke.de/ 5-7

W1100018 Drilling tool holder, Form E2 Shank VDI 20 none Mounting D10 external, p max 20 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 5-8

W1100019 Drilling tool holder, Form E2 Shank VDI 20 none Mounting D12 external, p max 20 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush W94280.21-- For more information see http://infoshop.index-werke.de/ 5-9

W1100001 Drilling tool holder Shank VDI 20 none Mounting D15 external, p max 20 bar reversable 180 no 26 (12) / / mm ('') Matching accessories Bush 993115.---- Nozzle* 474550.0121 * This article is included For more information see http://infoshop.index-werke.de/ 5-10

W1100020 Drilling tool holder, Form E2 Shank VDI 20 none Mounting D16 external, p max 20 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush W67511.04-- For more information see http://infoshop.index-werke.de/ 5-11

W1100009 Drilling tool holder Shank VDI 20 none Mounting D25 external, p max 20 bar reversable 180 no 43 (1.69) / / mm ('') Matching accessories Bush 993125.---- Nozzle* 474550.0121 * This article is included For more information see http://infoshop.index-werke.de/ 5-12

W1100002 Basic holder, vertically adjustable Shank VDI 20 none Mounting internal, p max 20 bar reversable 180 no 14 (0.55) / / mm ('') Matching modules Drill holding block Drill holding block W9990085 W9990086 For more information see http://infoshop.index-werke.de/ 5-13

W9990085 Drill holding block Shank Mounting ER 25 internal, p max 20 bar 42.5 (1.67) / / mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder Matching accessories W1210000 W1330002 W1230004 W1100002 W1220011 Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 5-14

W9990086 Drill holding block Shank Mounting D20 external, p max 20 bar 40 (1.57) / / mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder Matching accessories Bush W1210000 W1330002 W1230004 W1100002 W1220011 W62220.01-- For more information see http://infoshop.index-werke.de/ 5-15

W1100014 Center holder, elastic, live, Center replaceble Shank VDI 20 none Mounting MK0 reversable 180 no 66 (2.6) / / mm ('') Matching accessories Center* W13622.16 Center replaceble! * This article is included For more information see http://infoshop.index-werke.de/ 5-16

W1100013 Center holder, elastic, live Shank VDI 20 none Mounting reversable 180 no 65 (2.56) / / mm ('') For more information see http://infoshop.index-werke.de/ 5-17

W1100011 Tapping tool holder, over-running Shank VDI 20 none Mounting D12 external, p max 20 bar reversable 180 no 56 (2.2) / / mm ('') Matching accessories Bush 993112.---- Only for right-handed threads For more information see http://infoshop.index-werke.de/ 5-18

W1100003 Tapping tool holder Shank VDI 20 none Mounting D18 external, p max 20 bar reversable 180 no 50.5 (1.99) / / mm ('') Matching accessories Bush 993118.---- For more information see http://infoshop.index-werke.de/ 5-19

W1100012 Reaming tool holder, adjustable Shank VDI 20 none Mounting D12 external, p max 20 bar reversable 180 no 52 (25) / / mm ('') Matching accessories Bush 993112.---- For more information see http://infoshop.index-werke.de/ 5-20

W1100016 Broaching/ Slotting tool holder, rotating, live Shank VDI 20 none Mounting D12 external, p max 20 bar reversable 180 no 66 (2.6) / / mm ('') Matching cutting tools Mandrel Matching accessories W37606.---- Tube* W62211.2110 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 5-21

W1100015 Broaching/ Slotting tool holder, rotating, live Shank VDI 20 none Mounting D14 external, p max 20 bar reversable 180 no 69 (2.72) / / mm ('') Matching accessories Tube* W62211.2110 * This article is included For more information see http://infoshop.index-werke.de/ 5-22

Tool holder to spring-loaded tap holder Shank VDI 25 For more information, visit http://infoshop.index-werke.de/ 6-1

W1200006 Drilling tool holder, Form E4 Shank VDI 25 none Mounting ER 25 internal, p max 40 bar reversable 180 no 57 (2.24) / / mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 6-2

W1200017 Drilling tool holder, Form E4 Shank VDI 25 none Mounting ER 32 internal, p max 80 bar reversable 180 no 62 (2.44) / / mm ('') Matching accessories Clamping collet 901930.6--- tapping tool collet 3242-- tapping tool collet WZ9990.9509F Collet chuck W999068- Clamping nut* 901939.0321 Spanner 490219.0321 * This article is included For more information see http://infoshop.index-werke.de/ 6-3

W1200011 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D16 internal, p max 80 bar reversable 180 no 67 (2.64) / / mm ('') For more information see http://infoshop.index-werke.de/ 6-4

W1200012 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D20 internal, p max 80 bar reversable 180 no 67 (2.64) / / mm ('') For more information see http://infoshop.index-werke.de/ 6-5

W1200013 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D25 internal, p max 80 bar reversable 180 no 71 (2.8) / / mm ('') Matching accessories Grub screw W00013.0039 For more information see http://infoshop.index-werke.de/ 6-6

W1200014 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D32 internal, p max 80 bar reversable 180 no 74 (2.91) / / mm ('') Matching accessories Bush W63221.40-- For more information see http://infoshop.index-werke.de/ 6-7

W1200020 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D8 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 6-8

W1200015 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D10 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 6-9

W1200016 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D12 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 6-10

W1200042 Drilling tool holder, Specially for the marking tool WriteStar Shank VDI 25 none Mounting D12 reversable 180 no 68 (2.68) / / mm ('') Matching cutting tools Marking tool Other documents Product note W9990300 W9800004en For more information see http://infoshop.index-werke.de/ 6-11

W1200019 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D16 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush W67511.04-- For more information see http://infoshop.index-werke.de/ 6-12

W1200033 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D20 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush W62220.01-- For more information see http://infoshop.index-werke.de/ 6-13

W1200018 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D25 external and internal, p max 80 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Bush W62221.41-- For more information see http://infoshop.index-werke.de/ 6-14

W9990095 Compensation bushing Shank VDI 25 none Mounting D3/4'' Direction same as drive direction reversable 180 no 6 (0.24) / / mm ('') For more information see http://infoshop.index-werke.de/ 6-15

W1200007 Tapping tool holder, extendable Shank VDI 25 none Mounting DIN 1835 B/E D18 external, p max 20 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush 993118.---- Tube* W62211.2110 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 6-16

W1200028 Reaming tool holder Shank VDI 25 none Mounting ER 16 external, p max 20 bar reversable 180 no 63 (2.48) / / mm ('') Matching accessories Clamping collet 901930.1--- Clamping collet W99903-- Collet chuck W999065- Clamping nut* 901939.01 Tube* W63211.5112 Countersunk screw* 410360.0512 Spanner 490219.0161 * This article is included For more information see http://infoshop.index-werke.de/ 6-17

W1200030 Broaching/ Slotting tool holder, rotating, live Shank VDI 25 none Mounting D12 external, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching cutting tools Mandrel Matching accessories W37606.---- Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 6-18

W1200027 Calibrating tool Shank VDI 25 none Mounting reversable 180 no 190 (7.48) / / mm ('') Drawing scale changed, template inapplicable! For more information see http://infoshop.index-werke.de/ 6-19

For more information, visit http://infoshop.index-werke.de/ 6-2

Tool holder to spring-loaded tap holder Shank VDI 30 For more information, visit http://infoshop.index-werke.de/ 7-1

W1300037 Bar stop, adjustable, live Shank VDI 30 none Mounting reversable 180 no 60-97 (2.36-3.82) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-2

W1300038 Bar stop, adjustable, live Shank VDI 30 none Mounting reversable 180 no 60-97 (2.36-3.82) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-3

W9990096 Compensation bushing Shank VDI 30 none Mounting D3/4'' reversable 180 no 6 (0.24) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-4

W9990094 Compensation bushing Shank VDI 30 none Mounting D1'' reversable 180 no 6 (0.24) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-5

W1300023 Compensation holder Shank VDI 30 none Mounting D1'' internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Bush W35200.1905 For more information see http://infoshop.index-werke.de/ 7-6

W1300025 Drilling tool holder, Form E4 Shank VDI 30 none Mounting ER 25 internal, p max 80 bar reversable 180 no 68 (2.68) / / mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 7-7

W1300066 Drilling tool holder, Form E4 Shank VDI 30 none Mounting ER 32 internal, p max 20 bar reversable 180 no 76 (2.99) / / mm ('') Matching accessories Clamping collet 901930.6--- tapping tool collet 3242-- tapping tool collet WZ9990.9509F Collet chuck W999068- Clamping nut* 901939.0321 Spanner 490219.0321 * This article is included For more information see http://infoshop.index-werke.de/ 7-8

W1300026 Drilling tool holder, Form E4 Shank VDI 30 none Mounting ER 40 internal, p max 80 bar reversable 180 no 80 (3.15) / / mm ('') Matching accessories Clamping collet 901930.4--- Clamping nut* 901939.0401 Spanner 490219.0401 * This article is included For more information see http://infoshop.index-werke.de/ 7-9

W1300057 Drilling tool holder, Form E1 Shank VDI 30 none Mounting DIN 1835 E D20 internal, p max 80 bar reversable 180 no 67 (2.64) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-10

W1300058 Drilling tool holder, Form E1 Shank VDI 30 none Mounting DIN 1835 E D25 internal, p max 80 bar reversable 180 no 71 (2.8) / / mm ('') Matching accessories Grub screw W00013.0039 For more information see http://infoshop.index-werke.de/ 7-11

W1300014 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D8 external and internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-12

W1300015 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D10 external and internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-13

W1300016 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D12 external and internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-14

W1300067 Drilling tool holder, Specially for the marking tool WriteStar Shank VDI 30 none Mounting D12 reversable 180 no 68 (2.68) / / mm ('') Matching cutting tools Marking tool Other documents Product note W9990300 W9800004en For more information see http://infoshop.index-werke.de/ 7-15

W1300017 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D16 external and internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Bush W67511.04-- For more information see http://infoshop.index-werke.de/ 7-16

W1300018 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D20 external and internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Bush W62220.01-- For more information see http://infoshop.index-werke.de/ 7-17

W1300019 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D25 external and internal, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Bush W62221.41-- For more information see http://infoshop.index-werke.de/ 7-18

W1300053 Drilling tool holder Shank VDI 30 none Mounting D25 external and internal, p max 40 bar reversable 180 no 45 (1.77) / / mm ('') Matching accessories Bush 993125.---- Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 7-19

W1300013 Drilling tool holder, Form E2 Shank VDI 30 none Mounting D32 external, p max 20 bar reversable 180 no 70 (2.76) / / mm ('') Matching accessories Bush W63220.02-- Nozzle* 474550.0121 * This article is included For more information see http://infoshop.index-werke.de/ 7-20

W1300022 Drilling tool holder Shank VDI 30 none Mounting D32 internal, p max 80 bar reversable 180 no 73 (2.87) / / mm ('') Matching accessories Bush W63221.4020 Bush W63221.4025 For more information see http://infoshop.index-werke.de/ 7-21

W1300027 Drilling tool holder Shank VDI 30 none Mounting MK1 external, p max 20 bar reversable 180 no 30 (1.18) / / mm ('') Matching accessories Nozzle* 474550.0121 * This article is included For more information see http://infoshop.index-werke.de/ 7-22

W1300028 Drilling tool holder Shank VDI 30 none Mounting MK2 external, p max 20 bar reversable 180 no 27 (16) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-23

W1300029 Drilling tool holder Shank VDI 30 none Mounting MK3 external, p max 20 bar reversable 180 no 45 (1.77) / / mm ('') For more information see http://infoshop.index-werke.de/ 7-24

W1300012 Basic holder, vertically adjustable Shank VDI 30 none Mounting external, p max 20 bar reversable 180 no 14 (0.55) / / mm ('') Matching modules Drill holding block W9990092 Drill holding block W9990093 Matching accessories Tube W63210.2006 For more information see http://infoshop.index-werke.de/ 7-25

W9990092 Drill holding block Shank Mounting ER 25, p max 40 bar 30 (1.18) / / mm ('') Matching base holder Basic holder Basic holder Matching accessories W1330019 W1300012 Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 7-26

W9990093 Drill holding block Shank Mounting D32, p max 40 bar 57 (2.24) / / mm ('') Matching base holder Basic holder Basic holder Matching accessories Bush W1330019 W1300012 W63220.02-- For more information see http://infoshop.index-werke.de/ 7-27

W1300004 Center holder, live Shank VDI 30 none Mounting D15.4/Cone 1:7.5 reversable 180 no 69.5 (2.74) / / mm ('') Matching accessories Center W9636-.21-- Center replaceble! For more information see http://infoshop.index-werke.de/ 7-28

W1300005 Center holder, elastic, live Shank VDI 30 none Mounting D15.4/Cone 1:7.5 reversable 180 no 68.5 (2.7) / / mm ('') Matching accessories Center W9636-.21-- Range of spring 2.7 mm Yellow ring 0-2500 N Green ring 2500-5000 N Red ring 5000-8500 N For more information see http://infoshop.index-werke.de/ 7-29

W1300030 Tapping tool holder, extendable Shank VDI 30 none Mounting D25 external, p max 20 bar reversable 180 no 73 (2.87) / / mm ('') Matching accessories Bush 993125.---- Tube* W63211.5112 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 7-30

W1300031 Reaming tool holder, adjustable Shank VDI 30 none Mounting ER 25 external, p max 20 bar reversable 180 no 73.5 (2.89) / / mm ('') Matching accessories Clamping collet 901930.3--- Collet chuck W999067- Clamping nut* 901939.0251 Tube* W63211.5112 Countersunk screw* 410360.0512 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 7-31

W1300032 Reaming tool holder, adjustable Shank VDI 30 none Mounting D18 external, p max 20 bar reversable 180 no 59 (2.32) / / mm ('') Matching accessories Bush 993118.---- Tube* W63211.5112 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 7-32

W1300065 Reaming tool holder, self-centering Shank VDI 30 none Mounting D20 internal, p max 40 bar reversable 180 no 93 (3.66) / / mm ('') Matching accessories Bush W68510.04-- For more information see http://infoshop.index-werke.de/ 7-33

W1300034 Broaching/ Slotting tool holder, rotating, live Shank VDI 30 none Mounting D12 external, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching cutting tools Mandrel Matching accessories W37606.---- Nozzle* 474550.0121 Tube* W63501.2622 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 7-34

Tool holder fix Vee mounting For more information, visit http://infoshop.index-werke.de/ 8-1

W8900003 Bar stop, adjustable Shank Dovetail (ABC) none Mounting reversable 180 no 85 (3.35) / / -17 (-0.67) mm ('') For more information see http://infoshop.index-werke.de/ 8-2

W8900014 Bar stop, adjustable, live Shank Dovetail (ABC) none Mounting reversable 180 yes 85 (3.35) / / -65 (-2.56) mm ('') For more information see http://infoshop.index-werke.de/ 8-3

W8900001 Turning tool holder, double Shank Mounting reversable 180 Dovetail (ABC) none square 20x20 external, p max 20 bar no 65 (2.56) / / 0 mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* 474550.0101 Cheese-head screw* 410232.0406 * This article is included For more information see http://infoshop.index-werke.de/ 8-4

W8900002 Turning tool holder Shank Mounting reversable 180 Dovetail (ABC) none square 20x20 external, p max 20 bar no 85 (3.35) / / 0 mm ('') Matching accessories Angle W63300.0010 Angle W63300.0020 Nozzle* 474550.0101 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 8-5

W8900006 Basic holder, Contour plunging tool holder Shank Dovetail (ABC) none Mounting external, p max 40 bar reversable 180 no 45.5 (1.79) / / 9 (0.35) mm ('') Matching modules Grooving tool holding block W9990244 For more information see http://infoshop.index-werke.de/ 8-6

W9990244 Grooving tool holding block, adjustable Shank Mounting reversable 180 yes 40 (1.57) / / mm ('') Matching base holder Basic holder Basic holder W8900006 W5190129 For more information see http://infoshop.index-werke.de/ 8-7

W8900007 Basic holder, angle-adjustable Shank Dovetail (ABC) none Mounting external, p max 40 bar reversable 180 no 42 (1.65) / / 0 mm ('') Matching modules Grooving tool holding block Grooving tool holding block Matching accessories W9990055 W9990065 Ball* 420800.1000 Tube* W61012.0110 * This article is included For more information see http://infoshop.index-werke.de/ 8-8

W9990055 Grooving tool holding block, vertically adjustable Shank Mounting external, p max 20 bar 30 (1.18) / / mm ('') Matching base holder Basic holder Basic holder Grooving tool holding block Basic holder Basic holder Matching accessories W1150032 W1200023 W9990357 W8900007 W1250003 Shim W31400.46 For more information see http://infoshop.index-werke.de/ 8-9

W9990065 Grooving tool holding block, vertically adjustable Shank Mounting external, p max 20 bar 38 (1.5) / / mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Grooving tool holding block Matching accessories W1150032 W1200023 W1250003 W8900007 W9990357 Shim W31400.46 For more information see http://infoshop.index-werke.de/ 8-10

W8900013 Basic holder, adjustable Shank Dovetail (ABC) none Mounting external, p max 40 bar reversable 180 yes 52 (25) / / 10 (0.39) mm ('') Matching modules Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Grooving tool holding block Knurling tool holder W9990245 W9990246 W9990064 W9990066 W9990067 W9990068 W9990069 W9990072 W9990073 W9990074 W9990075 W9990076 W9990154 Matching accessories Nozzle* 474550.0121 Cheese-head screw* 410232.0406 Tube* W61003.0032 * This article is included For more information see http://infoshop.index-werke.de/ 8-11

W9990245 Grooving tool holding block, adjustable Shank Mounting square 20x20 reversable 180 yes 37 (1.46) / / 28 (1.10) mm ('') Matching base holder Basic holder W8900013 For more information see http://infoshop.index-werke.de/ 8-12

W9990246 Grooving tool holding block, adjustable Shank Mounting square 20x20 reversable 180 yes 45 (1.77) / / 28 (1.10) mm ('') Matching base holder Basic holder W8900013 For more information see http://infoshop.index-werke.de/ 8-13

W9990064 Grooving tool holding block, vertically adjustable Shank Mounting square 16x16 40 (1.57) / / 40 (1.57) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1230020 W1250022 W8900013 W1350009 W1330004 For more information see http://infoshop.index-werke.de/ 8-14

W9990066 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 8-15

W9990067 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 8-16

W9990068 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 8-17

W9990069 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 47.5 (1.87) / / 28.5 (1.12) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 8-18

W9990072 Grooving tool holding block, vertically adjustable Shank Mounting square 16x16 20 (0.79) / / 17 (0.67) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 8-19

W9990073 Grooving tool holding block, vertically adjustable Shank Mounting square 16x10 20 (0.79) / / 18 (0.71) mm ('') Matching base holder Basic holder Basic holder Basic holder W8900013 W1230020 W1250022 For more information see http://infoshop.index-werke.de/ 8-20

W9990074 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 16x3 20 (0.79) / / 25 (0.98) mm ('') Matching base holder Basic holder Basic holder Basic holder W8900013 W1230020 W1250022 For more information see http://infoshop.index-werke.de/ 8-21

W9990075 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 20x4 20 (0.79) / / 25 (0.98) mm ('') Matching base holder Basic holder Basic holder Basic holder W8900013 W1230020 W1250022 For more information see http://infoshop.index-werke.de/ 8-22

W9990076 Grooving tool holding block, vertically adjustable Shank Mounting Trapezoid 26x5 20 (0.79) / / 32 (1.26) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Basic holder W1330004 W1350009 W8900013 W1250022 W1230020 For more information see http://infoshop.index-werke.de/ 8-23

W9990154 Knurling tool holder Shank none Mounting D6 38 (1.5) / / 20 (0.79) mm ('') Matching base holder Basic holder Basic holder Basic holder Basic holder Matching cutting tools W1330004 W8900013 W1230020 W1250022 Knurl 22191-.21-- For more information see http://infoshop.index-werke.de/ 8-24

W8900005 Basic holder, vertically adjustable Shank Dovetail (ABC) none Mounting external and internal, p max 20 bar reversable 180 no 62 (2.44) / / -30 (-1.18) mm ('') Matching modules Drill holding block Drill holding block Drill holding block Matching accessories W9990242 W9990045 W9990243 Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 8-25

W9990242 Drill holding block, horizontally adjustable Shank Mounting D1'', p max 20 bar reversable 180 no 23.55 (0.93) / / 50 (1.97) mm ('') Matching base holder Basic holder Matching modules Drilling tool holder W8900005 W6290001 For more information see http://infoshop.index-werke.de/ 8-26

W9990045 Drill holding block Shank Mounting D25 23.55 (0.93) / / mm ('') Matching base holder Basic holder W8900005 Matching accessories Bush 993125.---- For more information see http://infoshop.index-werke.de/ 8-27

W9990243 Drill holding block Shank none Mounting D25 external, p max 20 bar reversable 180 no 33.55 (1.32) / / 50 (1.97) mm ('') Matching base holder Basic holder W8900005 Matching accessories Bush 993125.---- For more information see http://infoshop.index-werke.de/ 8-28

W8900009 Center holder, elastic Shank Dovetail (ABC) Mounting MK1 reversable 180 no 85 (3.35) / / -71 (-2.8) mm ('') Matching accessories Center W33621.16 For more information see http://infoshop.index-werke.de/ 8-29

W8900010 Scroll holder Shank Dovetail (ABC) Mounting, p max 40 bar reversable 180 no 90 mm (3.54 '') / / mm ('') Matching accessories Embossing roller W63380.0030 Embossing roller W63380.0060 Coolant required for function For more information see http://infoshop.index-werke.de/ 8-30

W8900012 Calibrating tool Shank Dovetail (ABC) none Mounting D40 reversable 180 yes 110 (4.33) / / 0 mm ('') For more information see http://infoshop.index-werke.de/ 8-31

W8900000 Cover plate, Steel Shank Dovetail (ABC) none Mounting 12 (0.47) / / mm ('') For more information see http://infoshop.index-werke.de/ 8-32

Tool holder live Vee mounting For more information, visit http://infoshop.index-werke.de/ 9-1

W8905002 Drilling unit Shank Dovetail (ABC) none Drive Beveled wheel (ABC) Mounting ER 11 external, p max 20 bar Speed ratio 1:1.33 (0.75) Direction opposite to drive direction reversable 180 no 87 (3.43) / / 1.5 (06) mm ('') Matching accessories Clamping collet 901930.0--- tapping tool collet 3239-- tapping tool collet 900288 Collet chuck W999064- Clamping nut* 322438 Nozzle* 474550.0101 Tube* W63501.2622 Cheese-head screw* 410232.0406 Spanner 490219.0111 * This article is included For more information see http://infoshop.index-werke.de/ 9-2

W8905004 Drilling unit, vertically adjustable Shank Dovetail (ABC) none Drive Beveled wheel (ABC) Mounting ER 16 external, p max 20 bar Speed ratio 1:1.93 (0.518) Direction opposite to drive direction reversable 180 no 105 (4.13) / / 37.5 (1.48) mm ('') Matching accessories Clamping collet 901930.1--- Clamping collet W99903-- tapping tool collet 3230-- tapping tool collet WZ9990.9506F Collet chuck W999065- Clamping nut* 901939.5161 Nozzle* 474550.0101 Tube* W67500.3206 Spanner 490219.3161 * This article is included For more information see http://infoshop.index-werke.de/ 9-3

W8905000 Drilling unit Shank Dovetail (ABC) none Drive Beveled wheel (ABC) Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 64 (2.52) / / -16.5 (-0.65) mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping nut* 901939.5201 Nozzle* 474550.0101 Tube* W63501.2622 Cheese-head screw* 410232.0406 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 9-4

W8905001 Milling unit Shank Dovetail (ABC) none Drive Beveled wheel (ABC) Mounting DIN 1835 B/E D16 external, p max 40 bar Speed ratio 4.5:1 (4.5) Direction same as drive direction reversable 180 no 96 (3.78) / / -16.5 (-0.65) mm ('') Matching accessories Bush W67511.04-- Tube* W67501.0020 Cheese-head screw* 410232.0406 * This article is included For more information see http://infoshop.index-werke.de/ 9-5

W8905005 Drilling unit Shank Dovetail (ABC) none Drive Beveled wheel (ABC) Mounting ER 20 external, p max 20 bar Speed ratio 1:1.13 (0.8857) Direction opposite to drive direction reversable 180 no 85 (3.35) / / 36.5 (1.44) mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping nut* 901939.5201 Nozzle* 474550.0101 Cheese-head screw* 410232.0506 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 9-6

W8905003 Drilling unit, angle-adjustable Shank Dovetail (ABC) none Drive Beveled wheel (ABC) Mounting ER 11 external, p max 40 bar Speed ratio 1:1.7 (0.588) Direction same as drive direction reversable 180 no 62 (2.44) / / 53.5 (2.11) mm ('') Matching accessories Clamping collet 901930.0--- tapping tool collet 3239-- tapping tool collet 900288 Collet chuck W999064- Clamping nut* 901939.5111 Gasket ring* 479103.0211 Tube* W67500.3206 Spanner 490219.3111 Spanner W61511.5072 * This article is included For more information see http://infoshop.index-werke.de/ 9-7

For more information, visit http://infoshop.index-werke.de/ 9-2

Tool holder fix Shank VDI 25, Rear End Machining Unit For more information, visit http://infoshop.index-werke.de/ 10-1

W1200006 Drilling tool holder, Form E4 Shank VDI 25 none Mounting ER 25 internal, p max 40 bar reversable 180 no 57 (2.24) / / mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 10-2

W1200017 Drilling tool holder, Form E4 Shank VDI 25 none Mounting ER 32 internal, p max 80 bar reversable 180 no 62 (2.44) / / mm ('') Matching accessories Clamping collet 901930.6--- tapping tool collet 3242-- tapping tool collet WZ9990.9509F Collet chuck W999068- Clamping nut* 901939.0321 Spanner 490219.0321 * This article is included For more information see http://infoshop.index-werke.de/ 10-3

W1200011 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D16 internal, p max 80 bar reversable 180 no 67 (2.64) / / mm ('') For more information see http://infoshop.index-werke.de/ 10-4

W1200012 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D20 internal, p max 80 bar reversable 180 no 67 (2.64) / / mm ('') For more information see http://infoshop.index-werke.de/ 10-5

W1200013 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D25 internal, p max 80 bar reversable 180 no 71 (2.8) / / mm ('') Matching accessories Grub screw W00013.0039 For more information see http://infoshop.index-werke.de/ 10-6

W1200014 Drilling tool holder, Form E1 Shank VDI 25 none Mounting DIN 1835 B/E D32 internal, p max 80 bar reversable 180 no 74 (2.91) / / mm ('') Matching accessories Bush W63221.40-- For more information see http://infoshop.index-werke.de/ 10-7

W1200020 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D8 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 10-8

W1200015 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D10 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 10-9

W1200016 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D12 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') For more information see http://infoshop.index-werke.de/ 10-10

W1200042 Drilling tool holder, Specially for the marking tool WriteStar Shank VDI 25 none Mounting D12 reversable 180 no 68 (2.68) / / mm ('') Matching cutting tools Marking tool Other documents Product note W9990300 W9800004en For more information see http://infoshop.index-werke.de/ 10-11

W1200019 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D16 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush W67511.04-- For more information see http://infoshop.index-werke.de/ 10-12

W1200033 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D20 external and internal, p max 80 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush W62220.01-- For more information see http://infoshop.index-werke.de/ 10-13

W1200018 Drilling tool holder, Form E2 Shank VDI 25 none Mounting D25 external and internal, p max 80 bar reversable 180 no 60 (2.36) / / mm ('') Matching accessories Bush W62221.41-- For more information see http://infoshop.index-werke.de/ 10-14

W9990095 Compensation bushing Shank VDI 25 none Mounting D3/4'' Direction same as drive direction reversable 180 no 6 (0.24) / / mm ('') For more information see http://infoshop.index-werke.de/ 10-15

W1200007 Tapping tool holder, extendable Shank VDI 25 none Mounting DIN 1835 B/E D18 external, p max 20 bar reversable 180 no 50 (1.97) / / mm ('') Matching accessories Bush 993118.---- Tube* W62211.2110 Countersunk screw* 410360.0512 * This article is included For more information see http://infoshop.index-werke.de/ 10-16

W1200028 Reaming tool holder Shank VDI 25 none Mounting ER 16 external, p max 20 bar reversable 180 no 63 (2.48) / / mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Sealing washer W99904-- Clamping nut 901939.3251 Spanner 490219.0251 For more information see http://infoshop.index-werke.de/ 10-17

W1200030 Broaching/ Slotting tool holder, rotating, live Shank VDI 25 none Mounting D12 external, p max 20 bar reversable 180 no 60 (2.36) / / mm ('') Matching cutting tools Mandrel Matching accessories W37606.---- Nozzle* 474550.0121 Cheese-head screw* 410243.0406 * This article is included For more information see http://infoshop.index-werke.de/ 10-18

W1200027 Calibrating tool Shank VDI 25 none Mounting reversable 180 no 190 (7.48) / / mm ('') Drawing scale changed, template inapplicable! For more information see http://infoshop.index-werke.de/ 10-19

For more information, visit http://infoshop.index-werke.de/ 10-2

Tool holder live Shank VDI 25, Rear End Machining Unit For more information, visit http://infoshop.index-werke.de/ 11-1

W1205023 Drilling unit Shank VDI 25 none Drive Spline shaft (ABC) Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 54 (2.13) / / 0 mm ('') Matching accessories Clamping collet 901930.2--- tapping tool collet 3234-- Collet chuck W999066- Clamping nut* 901939.5201 Tube* W67501.0020 Countersunk screw* 410360.0412 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 11-2

W1205021 Tapping unit, extendable Shank VDI 25 none Drive Spline shaft (ABC) Mounting ER 20 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 no 60 (2.36) / / 0 mm ('') Matching accessories Clamping collet 901930.2--- Collet chuck W999066- Clamping nut* 901939.5201 Driver W67451.00-- Tube* W67501.0020 Countersunk screw* 410360.0410 Spanner 490219.3201 * This article is included For more information see http://infoshop.index-werke.de/ 11-3

W1235054 Circular saw unit Shank VDI 25 Vee bar Drive Spline shaft (ABC) Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2,7:1 (2,7) Direction same as drive direction reversable 180 no 68 (2.68) / / 0 mm ('') Matching cutting tools Saw blade 223010.63-- Saw blade 223011.80-- Matching accessories Tube* W67501.0020 Countersunk screw* 410360.0410 Bush* WK7850.22 Bush W92853.2050 Bush W92853.2060 Bush W61851.0050 Gib W61851.0004 * This article is included For more information see http://infoshop.index-werke.de/ 11-4

Tool holder fix Shank 1, Rear End Machining Unit For more information, visit http://infoshop.index-werke.de/ 12-1

W6290001 Drilling tool holder Shank 1'' none Mounting ER 25 22 (0.87) / / mm ('') Matching base holder Drill holding block Matching accessories W9990242 Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping nut* 901939.0251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 12-2

W6290020 Drilling tool holder Shank 1'' none Mounting ER 25 internal, p max 40 bar reversable 180 yes 50 (1.97) / / 0 mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.3251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 12-3

W6290019 Drilling tool holder Shank Mounting reversable 180 1'' none DIN 1835 B/E D25 internal, p max 40 bar yes 56 (2.2) / / 0 mm ('') Matching accessories Bush W62221.41-- For more information see http://infoshop.index-werke.de/ 12-4

W6290018 Drilling tool holder, adjustable Shank Mounting reversable 180 1'' none D18 internal, p max 20 bar yes 56 (2.2) / ±2 (±08) / ±2 (08) mm ('') Matching accessories Bush 993118.---- Turning tool holder W9990241 Locking plate W9990997 For more information see http://infoshop.index-werke.de/ 12-5

W6290000 Drilling tool holder Shank 1'' none Mounting D25 40 (1.57) / / mm ('') Matching accessories Bush 993125.---- For more information see http://infoshop.index-werke.de/ 12-6

W6290015 Drilling tool holder Shank 1'' none Mounting MK1 Direction same as drive direction reversable 180 yes 16 (0.63) / / mm ('') For more information see http://infoshop.index-werke.de/ 12-7

W6290016 Drilling tool holder Shank 1'' none Mounting MK2 Direction same as drive direction reversable 180 yes 29 (1.14) / / mm ('') For more information see http://infoshop.index-werke.de/ 12-8

W6290008 Center holder, elastic, live Shank 1'' none Mounting D18 72.5 (2.85) / / mm ('') For more information see http://infoshop.index-werke.de/ 12-9

W6290007 Center holder, elastic, live Shank 1'' none Mounting MK1 72.5 (2.85) / / mm ('') Matching accessories Center W33621.16 Center replaceble! For more information see http://infoshop.index-werke.de/ 12-10

W6290002 Tapping tool holder, extendable Shank 1'' none Mounting D25 52 (25) / / mm ('') Matching accessories Bush 993125.---- For more information see http://infoshop.index-werke.de/ 12-11

W6290003 Tapping tool holder, over-running Shank 1'' none Mounting D25 56 (2.2) / / mm ('') Matching accessories Bush 993125.---- For more information see http://infoshop.index-werke.de/ 12-12

W6290005 Reaming tool holder, adjustable Shank 1'' none Mounting ER 25 55 (2.17) / / mm ('') Matching accessories Clamping collet 901930.3--- Collet chuck W999067- Clamping collet, sealed W999085- Clamping nut* 901939.3251 Spanner 490219.0251 * This article is included For more information see http://infoshop.index-werke.de/ 12-13

W6290006 Reaming tool holder, adjustable Shank 1'' none Mounting D18 41 (1.61) / / mm ('') Matching accessories Bush 993118.---- For more information see http://infoshop.index-werke.de/ 12-14

W6290011 Broaching/ Slotting tool holder, rotating, live Shank 1'' none Mounting D12 58 (2.28) / / mm ('') Matching cutting tools Mandrel W37606.---- For more information see http://infoshop.index-werke.de/ 12-15

W6290012 Broaching/ Slotting tool holder, rotating, live Shank 1'' none Mounting D20 76 (2.99) / / mm ('') Matching cutting tools Mandrel W37606.---- Matching accessories Bush W37610.2012 For more information see http://infoshop.index-werke.de/ 12-16

W6290010 Broaching/ Slotting tool holder, rotating, live Shank 1'' none Mounting D30 78-88 (37-3.46) / / mm ('') Matching cutting tools Drawing AZ4091.00 For more information see http://infoshop.index-werke.de/ 12-17

W6290009 Broaching/ Slotting tool holder Shank 1'' none Mounting D50 80-90 (3.2-3.54) / / mm ('') For more information see http://infoshop.index-werke.de/ 12-18

W6290017 Guide holder Shank 1'' none Mounting 57 (2.24) / / mm ('') Matching modules Roller holding block W9990176 Roller holding block W9990177 Matching accessories Bush 993115.---- For more information see http://infoshop.index-werke.de/ 12-19

W9990176 Roller holding block, adjustable Shank Mounting / / mm ('') Matching base holder Guide holder W6290017 Matching cutting tools Sliding roller W33400.06 For more information see http://infoshop.index-werke.de/ 12-20

W9990177 Roller holding block, adjustable Shank Mounting / / mm ('') Matching base holder Guide holder W6290017 Matching cutting tools Sliding roller W33400.06 For more information see http://infoshop.index-werke.de/ 12-21

W6290004 Knurling tool holder, adjustable Shank 1'' none Mounting D6-36 / / mm ('') Matching accessories Bush 993125.---- Spacer W33960.1812 For more information see http://infoshop.index-werke.de/ 12-22

Tool holder live Shank 1, Rear End Machining Unit For more information, visit http://infoshop.index-werke.de/ 13-1

W6295001 Drilling unit Shank 1'' none Drive Spline shaft (ABC) Mounting ER 25 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 yes 68 (2.68) / / 0 mm ('') Matching accessories Clamping collet 901930.3--- tapping tool collet 3224-- tapping tool collet WZ9990.9507F Collet chuck W999067- Clamping nut* 901939.5251 Tube* W63490.0022 Countersunk screw* 410360.0512 Spanner 490219.3251 * This article is included For more information see http://infoshop.index-werke.de/ 13-2

W6295000 Tapping unit, extendable Shank 1'' none Drive Spline shaft (ABC) Mounting ER 16 external, p max 40 bar Speed ratio 1:1 (1) Direction same as drive direction reversable 180 yes 61 (2.4) / / 0 mm ('') Matching accessories Clamping collet 901930.1--- Clamping collet W99903-- tapping tool collet WZ9990.9506F Collet chuck W999065- Clamping nut* 901939.5161 Tube* WK5102.10 Spanner 490219.3161 For right-and left-handed threads * This article is included For more information see http://infoshop.index-werke.de/ 13-3

W6295002 Circular saw unit Shank 1'' none Drive Spline shaft (ABC) Mounting Milling tool mounting D16 external, p max 40 bar Speed ratio 2,7:1 (2,7) Direction same as drive direction reversable 180 no 75 (2.95) / ±12.5 (±0.49) / 0 mm ('') Matching cutting tools Saw blade 223010.63-- Saw blade 223011.80-- Matching accessories Ring 251390.---- Ring 251391.---- Clamping piece K84091.50 Tube* WK7851.50 Bush W61851.0050 Bush* WK7850.22 Bush W92853.2050 Bush W92853.2060 * This article is included For more information see http://infoshop.index-werke.de/ 13-4

Accessories INDEX ABC For more information, visit http://infoshop.index-werke.de/ 14-1

W67501.2050 IC Attachment for internal cooling lubricant supply, 20 bar no dry run ø40 15,5 2 7,5 ø17 ø8 For more information, visit http://infoshop.index-werke.de/ 14-2

W67500.5044 IC Attachment for internal cooling lubricant supply, 20 bar no dry run ø50 13,5 8 ø8 For more information, visit http://infoshop.index-werke.de/ 14-3

W31400.46 Steel Block for form cutting tool 8 20 26 10 For more information, visit http://infoshop.index-werke.de/ 14-4

W67101.0050 Setting gauge 21 55 12 For more information, visit http://infoshop.index-werke.de/ 14-5

W9990241 Turning tool holder 12 22 14 18 74 94 ø18h6 For more information, visit http://infoshop.index-werke.de/ 14-6

W9990997 Locking plate 25 ø20 46 23 64 For more information, visit http://infoshop.index-werke.de/ 14-7

AZ4005.03 Replacement Seals for Tool Shank O-ring O-ring color Part Number Installation location ø18.77 x 1.78 green 479103.0181 Shank-ø 20 ø23.52 x 1.78 green 479103.0231 Shank-ø 25 ø9.75 x 1.78 green 479103.0101 lubricant adapter ø28.3 x 1.78 green 479103.0281 Shank-ø 30 ø37.77 x 2.62 green 319673 Shank-ø 40 ø38.60 x 2.90 red 326174 Shank-ø 40 ø12.42 x 1.78 green 479103.0121 lubricant adapter The color of the reordered O-ring must always be the same as the one already used on the tool shank. For more information, visit http://infoshop.index-werke.de/ 14-8

AZ4019.00 Sealing Washer and Mounting Pin X Z X Z Machine Shank size Sealing washer Mounting pin INDEX ABC VDI25 L33261.10 L33262. INDEX C65 VDI25 L73721.80 L33262. INDEX C100 VDI20 VDI25 P63111.30 L73721.80 P63151.70 L33262. INDEX C200 VDI25 VDI30 L73721.80 L43251.80 L33262. L43251.70 INDEX G160 VDI25 VDI30 L73721.80 L43251.80 L33262. L43251.70 INDEX G200 VDI25 L33261.10 L33262. INDEX G250 VDI30 VDI40 L43251.80 L83291.50 L43251.70 L83121.30 INDEX G300 VDI30 VDI40 L43251.80 L43271.80 L43251.70 L43281.10 INDEX G400 VDI40 L93132.50 L43281.10 INDEX V160 VDI25 VDI30 L73721.80 U24111.20 L33262. L43251.70 INDEX V200 VDI25 VDI30 L33261.10 L43251.80 L33262. L43251.70 INDEX V300 VDI30 VDI40 L43251.80 L43271.80 L43251.70 L43281.10 TRAUB TNX 65/42 VDI30 L43251.80 L43251.70 For more information, visit http://infoshop.index-werke.de/ 14-9

For more information, visit http://infoshop.index-werke.de/ 14-10

Product notes INDEX ABC For more information, visit http://infoshop.index-werke.de/ 15-1

9-26

PRODUKTBESCHREIBUNG Product note External/internal cooling lubricant supply Drill holder with cylindrical shank tool mounting Offset set screws W9800001EN-26.01.2011 0111/Rö

Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances. A Word on Copyright This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation. Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011 Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011

EXTERNAL/INTERNAL COOLING LUBRICANT SUPPLY External/internal cooling lubricant supply Drill holder with cylindrical shank tool mounting Offset set screws External cooling lubricant supply Internal cooling lubricant supply Delivery condition Product note External/internal cooling lubricant supply W9800001EN-26.01.2011 3

INDEX-Werke GmbH & Co. KG Hahn & Tessky Plochinger Strasse 92 D-73730 Esslingen, Germany www.index-werke.de TRAUB-Drehmaschinen GmbH & Co. KG Hauffstrasse 4 D-73262 Reichenbach, Germany www.traub.de TECHNICAL ADVICE Phone +49 (0) 711 3191-9854 Fax +49 (0) 711 90129-343 werkzeughalter@index-werke.de TECHNICAL ADVICE Phone +49 (0) 7153 502-9854 Fax +49 (0) 711 90129-343 werkzeughalter@traub.de SPARE PARTS SALES Phone +49 (0) 711 3191-260 Fax +49 (0) 711 3191-790 ersatzteile@index-werke.de SPARE PARTS SALES Phone +49 (0) 7153 502-600 Fax +49 (0) 7153 502-685 ersatzteile@traub.de

PRODUKTBESCHREIBUNG Product note Writestar RM12/RM20 W9800004EN-20.06.2011 0611 /Rö

Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances. A Word on Copyright This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation. Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011 Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011

TABLE OF CONTENTS Working principle... 4 Applications... 4 Setting the marking depth... 5 Programming notes... 5 Stylus wear... 5 Product note Writestar RM12/RM20 W9800004EN-20.06.2011 3

Working principle WriteStar is a marking tool that can be used on all CNC machines with an engraving software package. Marking labels are permanently created by a combination of material compaction and displacement using a special stylus. The tool requires no spindle rotation, cooling lubricant or pressurized air. The surface may be wetted with oil or cooling lubricant, but it is not necessary. Spindle speeds up to 300rpm are allowed, but they are also not necessary. Applications WriteStar is suitable for marking surfaces - with up to 60HRC hardness. - with up to 3mm (RM12) or 5mm (RM20) unevenness. - that are non-machined or machined. Max. 15-degree slants can be labeled evenly. The materials that can be marked include - steel - cast - plastic - aluminum - titan Suitable mountings are turning tool holders with 12/16/20mm or parallel shank mountings with 12 or 20mm diameter. The tool mounting clamp screws may contact the WriteStar only through a flat clamping plate, as its housing may be destroyed. The maximum allowed surface load is 500 N/cm². For optimal use of WriteStar if space is limited, INDEX TRAUB offers a range of slim drill holders http://infoshop.index-werke.de 4 Product note Writestar RM12/RM20 W9800004EN-20.06.2011

Setting the marking depth The marking depth depends on the surface hardness; it can be determined by the tool infeed and by the adjusting screw on the back of the tool. The more the adjusting screw is turned in, the larger is the force acting on the stylus, resulting in a wider marking line. The standard screw-in depth is 6mm (factory setting), while the maximum depth is 15mm. Changing the screw-in depth has no effect on the tool length. Burrs can be avoided by reducing the infeed/screw-in depth. Programming notes Many machine tool manufacturers offer subprograms for labeling with numbers, letters, and logos. If engraving software has already been used, it can also be applied for marking with WriteStar. This requires the following changes - Reduce the spindle speed to 0rpm or to the lowest speed. - Increase the feed rate to the maximum. - Program the tool length such that the special stylus retreats 1-2mm (the insertion depth is not equal to the scoring depth). - If a burr forms along the marking line or if the marking is too weak, this can be corrected using tool offset. Stylus wear Experience shows that the stylus, when used under typical conditions and for common material hardnesses, has a life cycle of several years or more than 40km of marking length. The stylus is replaced by us. Only original styluses ensure the desired marking quality. Disassembly of the tool will void the warranty. Infoshop YouTube Product note Writestar RM12/RM20 W9800004EN-20.06.2011 5

INDEX-Werke GmbH & Co. KG Hahn & Tessky Plochinger Strasse 92 D-73730 Esslingen, Germany www.index-werke.de TRAUB-Drehmaschinen GmbH & Co. KG Hauffstrasse 4 D-73262 Reichenbach, Germany www.traub.de TECHNICAL ADVICE Phone +49 (0) 711 3191-9854 Fax +49 (0) 711 90129-343 werkzeughalter@index-werke.de TECHNICAL ADVICE Phone +49 (0) 7153 502-9854 Fax +49 (0) 711 90129-343 werkzeughalter@traub.de SPARE PARTS SALES Phone +49 (0) 711 3191-260 Fax +49 (0) 711 3191-790 ersatzteile@index-werke.de SPARE PARTS SALES Phone +49 (0) 7153 502-600 Fax +49 (0) 7153 502-685 ersatzteile@traub.de

PRODUKTBESCHREIBUNG Product note External/internal cooling lubricant supply Drill holder with collet chuck Offset set srew W9800005EN-26.01.2011 0111/Rö

Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors or based on technical advances. A Word on Copyright This document is proprietary and was originally written in German. Its reproduction and distribution in whole or in individual parts without permission of the copyright owner is prohibited and will be prosecuted under criminal or civil law. All rights reserved, including for translation. Copyright by INDEX-Werke GmbH & Co. KG Esslingen 2011 Copyright by TRAUB Drehmaschinen GmbH & Co. KG Reichenbach 2011

EXTERNAL/INTERNAL COOLING LUBRICANT SUPPLY External/internal cooling lubricant supply Drill holder with collet chuck Offset set srew External cooling lubricant supply Internal cooling lubricant supply Delivery condition Product note External/internal cooling lubricant supply W9800005EN-26.01.2011 3

INDEX-Werke GmbH & Co. KG Hahn & Tessky Plochinger Strasse 92 D-73730 Esslingen, Germany www.index-werke.de TRAUB-Drehmaschinen GmbH & Co. KG Hauffstrasse 4 D-73262 Reichenbach, Germany www.traub.de TECHNICAL ADVICE Phone +49 (0) 711 3191-9854 Fax +49 (0) 711 90129-343 werkzeughalter@index-werke.de TECHNICAL ADVICE Phone +49 (0) 7153 502-9854 Fax +49 (0) 711 90129-343 werkzeughalter@traub.de SPARE PARTS SALES Phone +49 (0) 711 3191-260 Fax +49 (0) 711 3191-790 ersatzteile@index-werke.de SPARE PARTS SALES Phone +49 (0) 7153 502-600 Fax +49 (0) 7153 502-685 ersatzteile@traub.de

9-26

INDEX-Werke GmbH & Co. KG Hahn & Tessky Plochinger Straße 92 D-73730 Esslingen, Germany www.index-werke.de TRAUB-Drehmaschinen GmbH & Co. KG Hauffstraße 4 D-73262 Reichenbach, Germany www.traub.de TECHNICAL ADVICE Phone +49 (0) 711 3191-9854 Fax +49 (0) 711 90129-343 werkzeughalter@traub.de TECHNICAL ADVICE Phone +49 (0) 7153 502-9854 Fax +49 (0) 711 90129-343 werkzeughalter@traub.de SPARE PARTS SALE Phone +49 (0) 711 3191-600 Fax +49 (0) 711 3191-790 ersatzteile@index-werke.de SPARE PARTS SALE Phone +49 (0) 7153 502-600 Fax +49 (0) 7153 502-685 ersatzteile@traub.de