Pumps for fuel oil and gas boiler Condensate water pump with neutralisation system
SK9E/FP8E débit obtenu (l/h) caractéristriques selon la fréquence réglée performances avec une hauteur d aspiration de 3 m 18 16 position 4-5Hz position 3-25Hz position 2-16.5Hz 14 position 1-12.5Hz 12 1 8 6 4 2 2 4 6 8 1 12 14 hauteur de refoulement (m) Pressure pump system with electromagnetic piston pump, four different flow rates adjustable, self regulating pressure control, pressure relief valve, safety oil chamber, bleed and drain valve, built-in suction filter, completely wired with earthing contact-type plug and mounting strip. Pipe connection: ID 8mm. The unit can be used for different applications by changing the position of a jumper on the pump's PCB. Application : 1. Delivered in version SK9E as central oil distribution system with one or more oil ovens to be used as a permanent operating pump during the heating season (not usable for full-year operation) 2. Version FP8E, feeding pump for oil burners in on-line systems or automatic oil evaporation burners (e.g.for tiled stoves) Advantages : - Optimal regulation of the flow rate according to the consumption (from 5 to 1KW) - Reduction of the wear - Very great lifetime in synchronized mode - One-line system, no return to the tank - Reduce noise level - Anti return valve included Dimensions : 18 x 2 x 98 mm Weight : 18 g Power : 25 VA Voltage : 23V/5Hz Jumper for selection of the application Jumper for regulation of the flow rate
KD1 Pressure storage system with electromagnetic piston pump, control and safety device depending on the delivery length, pressure gauge, built-in suction filter. Pipe connections: ID 8mm, completely wired with earthing contact-type and mounting strip. Built-in safety oil pan with separate detection. Application : Central oil distribution system up to 12 users, suitable for full-year operation (e.g.feeding pump for oil burners in one-line systems). Advantages : - Optimum intermittent operation - Lifetime prolonged - Reduce noise level - One-line system, no return to the tank - Anti return valve included - Anti-leak included Dimensions : 28 x19 x17 mm Weight : 415 g Power : 4 VA Voltage : 23V/5Hz
SP32 1 débit de remplissage (l/h) 3 25 2 15 1 5. 1. 2. 3. 4. 5. 6. 7. hauteur d aspiration (m) longueur de conduite 1 m 2 m 3 m 4 m Suction pump system with electromagnetic piston pump, floatcontrol- and safety device, built-in suction filter, check valve, 1,6l oil storage tank, LCD display with permanent function-control feedback, built-in safety oil pan with separate detection, thermical safety detection. Pipe connection : ID 8mm, completely wired with earthing contact type plug. Application : Ecological system used for fan burner up to 8kW at 7m suction height and for oil/tiled ovens. Foreseen for one-line system. Advantages : - Operating cycle with 1% security - Operating cycle and eventually disturbed described on the LCD display. - Safety oil pan with separate detection - Protect again dry run - Pump will stop if oil tank is empty, if the pipes are damaged and if the ambient temperature is too high.. Dimensions : 25x217x168 mm Weight : 2 g Power : 4 VA Volatge : 23V/5Hz
SP32 2-4 et SP32 2-8 Suction pump system with electromagnetic pump, float, control and safety device, built-in suction filter, 7.3l oil storage tank, built-in safety oil pan with separate detection, LCD display with permanent function control feedback with anti-syphoning protection valve, alternatively in mechanical version SP32 M or electrical version SP32 E (is driven through the oil burner). Pipes connection: ID 6 for the 4l version (SP32 2-4) and ID 8 for the 8l version (SP32 2-8). Completely wired with earthing contact-type plug. 9 8 7 6 5 4 3 2 1 longueur de conduite 1 m 2 m 3 m 4 m. 1. 2. 3. 4. 5. 6. 7. Application : Full-automatic suction pump system for feeding oils burners up to max.5l/h nozzle capacity. Foreseen only for one-line systems. Version SP32 2-4R can be used as central oil distribution system with one or more oil ovens. Advantages : - Storage of 7.3l of heating oil - Operating cycle and eventually disturbed described on the LCD display - Anti return valve included and choice of electrical or mechanical anti-syphoning. - Safety oil pan with separate detection - Protect again dry run - Pump will stop if oil tank is empty, if the pipes are damaged and if the ambient temperature is too high.. - The big quantity of oil stocked in the pump (7.3l) allow to this oil to take the ambient temperature. Thanks to this fact, the stability and viscosity is all time the same and facilitate the regulation of the burner flame. Technical datas of the SP32 2-4: Dimensions : 315x38x325 mm Weight : 65 g Power : 4 VA Voltage : 23V/5Hz Technical datas of the SP32 2-8: Dimensions : 315x38x325 mm Weight : 7 g Power : 8 VA Voltage : 23V/5Hz 7 6 5 4 3 2 1 hauteur d aspiration (m). 1. 2. 3. 4. 5. 6. 7. hauteur d aspiration (m) longueur de conduite 1 m 2 m 3 m 4 m
SP32 2-4-D/R 7 6 5 4 3 2 débit pompe aspirante longueur de conduite 1 m 2 m 3 m 4 m Same system like the SP32-4, but built with 2 piston pumps : 1 for the suction and 1 for the pressure. Foreseen as an intermediate station for suction and pressure operation in case of long conduits between the tank and the boiler. This system can be built everywhere on the conduits 1 1 2 3 4 5 6 7 8 Same safety devices as the SP32 range. 45 4 35 3 25 2 15 1 5 hauteur d aspiration (m) débit pompe refoulante 2 4 6 8 1 12 14 16 18 hauteur de refoulement (m) Dimensions : 315x38x325 mm Weight : 7 g Power : 8 VA Voltage : 23V/5Hz
SP32 3-2 High performance-internal gear pump (gap compensated), motor, float-, control- and safety. Device, built-in suction filter, 7.3l storage tank, built-in safety oil pan with separate electrical detection, LCD display with permanent function-control feedback, vacuum gauge, two separate feeding lines whether with electrical or mechanical or without antisyphoning-protection-valves, all pipe connectors are located above the security pan, pipe connections for ID1mm pipe, separate vent connection, completely wired with earthing contact-type plug. 22 21 2 19 18 17 16 2 4 6 8 9.5 Application: Full automatic suction pump system for supplying one or several oil burners up to 18l/h nozzle capacity (see performance diagram), only for one-line systems. Dimensions : 635x46x245 mm Weight : 2 Kg Power : 15 VA Voltage : 23V/5Hz hauteur d aspiration (m)
DSA4 7 6 5 4 3 2 1 aspiration 1 m aspiration 2.5 m aspiration 4 m.5 1. 1.5 2. 2.5 3. The system consists of a fuel oil delivery pump system and a gas pressure accumulator, completely installed on a mounting panel to be fixed on the wall. The equipment is completely installed, wired with earthing contacttype plug and is provided with ID6mm pipe connections for suction-, feed- and return line. In case of line break the unit be automatically stopped by a security pressure switch (<.6bar). If the pressure fall under 1.5bar a safety device will stop the pump. pression (bar) Tubes: calculer.9 bar perdu par 1 m horizontalement ou 1 m verticalement Applications : Central oil distribution system for housing estates with several oil ovens (> 12 users) suitable for full-year operation. Automatic distribution of oil burners in one-line systems up to 35kW. Technicalk datas : Dimensions : 48x34x21 mm Weight : 9 g Power : 6 VA Voltage : 23V/5Hz
EE4 Condensat water pump with neutralisation system The centrifugal condensate pump EE4 is designed to automatically remove the liquid from an oil or gas burner. Not equipped with granulate for the neutralisation of the condensate water. This pump is made from a tough ABS plastic body so it will resist corrosion and impact. Advantages: - Silent running centrifugal pump with 1,5m power cord - Ball bearing drive shaft - Max. medium temperature : 75ºC - Check valve to prevent back-flow of liquid into the unit - Overflow safety alarm switch - The most compact system and silent pumps on the market Dimensions : 185x85x1 mm Weight : 16 g Voltage : 23V/5-6Hz Power : 65 VA Tank capacity :.5l Alarm switch : 24V, 6A (NO) ohmic load 35 28 22 1 1 2 3 4 hauteur de refoulement (m)
EKF15 T Condensat water pump with neutralisation system 16 12 Removal condensate system without neutralisation granulate. This pump is foreseen for little application until 25kW and have the advantage to remove the condensate until 14m vertical delivery height, thank to the built-in electromagnetic pump. 8 4 2 4 6 8 1 hauteur de refoulement (m) Advantages : - High quality electromagnetic piston pump - Temporized safety device in order to reduce the time running of the pump - Low tension in order to reduce the wear of the contacts - Overflow safety device - Filter and non-return valve included - Wired (1m) with electrical plug Dimensions : 244x174x144 mm Weight : 16 g Voltage : 23V/5Hz Power : 4 VA Tank capacity : 2 l Alarm switch : 24V, 1A ohmic load
EKF15-25NB Condensat water pump with neutralisation system Removal condensate system with neutralisation process. Completely adapted for applications until 5kW and with a supplementary tank NB5 with granulate can be used for installation until 1kW. Thank to his low noise level the pump can be installed in the house (domestically use) or in the heating room near the boiler. Like the EKF15-T the system have a built-in electromagnetic piston pump which can remove the condensate until 14m vertical delivery height 16 12 8 4 Adavantages : - Same as the EKF15-T - With the tank NB5 in serial, the system can remove condensate and neutralize installation until 1kW Dimensions : 244x174x261 mm Weight : 32 g (with granulates) Voltage : 23V/5Hz Power : 4 VA Tank capacity : 6 l Alarm switch : 24V, 1A ohmic load 2 4 6 8 1 hauteur de refoulement (m)
EKF17-6NB Condensat water pump with neutralisation system Same system as the EKF15-25NB, but for installation until 6 KW. Thank to the built-in electromagnetic piston pump, the system can remove the condensate until 16m vertical delivery height. 12 Adavantages : - Efficient and high performances - Complet and economical system - The tank can be delivered without the pump, to be used as a neutralisation system. - Easy maintenance - Overflow safety device - Wired (1m) with electrical plug Dimensions : 655x4x245 mm Weight : 31 Kg (with granulates) Voltage : 23V/5Hz Power : 45 VA Alarm switch : 24V, 8A ohmic load As spare parts for all the neutralisation system you can order bags of neutralisation granulates from 1Kg and 25 Kg. 11 1 9 8 2 4 6 8 1 hauteur de refoulement (m)