1.GENERAL INTRODUCTION...1 1.1. BRIEF INTRODUCTION...1 1.2.APPLICATIONS...1 1.3 APPEARANCE AND INTERFACE...2 1.3.1 Product appearance...2 1.3.

1.GENERAL INTRODUCTION...1 1.1. BRIEF INTRODUCTION...1 1.2.APPLICATIONS...1 1.3 APPEARANCE AND INTERFACE...2 1.3.1 Product appearance...2 1.3.2 Interface introduction...2 2. FUNCTION INTRODUCTION...3 2.1. BASIC FUNCTION INTRODUCTION...3 2.2. ADVANCED FUNCTION INTRODUCTION...3 2.3. SYSTEM REQUIREMENTS...4 3. INSTALLATION...5 3.1. CONNECTION OF NETWORK CABLE AND POWER ADAPTER...5 3.2. CONNECT IP CAMERA TO ROUTER/SWITCH/HUB WITH NETWORK CABLE...6 4. ACCESS TO IP CAMERA...6 4.1. ACCESS TO IP CAMERA THOUGH WEB PAGE...6 4.2. USE FINDER...7 4.3. SYSTEM LOGIN...8 4.4. FUNCTION OPERATION...10 4.5. IP CAMERA SETTINGS... 11 4.5.1. Camera information... 11 4.5.2. Alias settings...12 4.5.3. Data & Time settings...12 4.5.4. Users settings...13 4.5.5. RTSP settings...13 4.5.6. Multi-Camera settings...13 4.5.7. Basic network settings...14 4.5.8. Wireless LAN settings...15 4.5.9. PPPoE settings...15 4.5.10. UPnP settings...16 4.5.11. DDNS service settings...16 4.5.12. Video setting...16 4.5.13. Mail service settings...17 4.5.14. FTP service settings...17 4.5.15. Alarm service settings...18 4.5.16. SD card record...18 4.5.17. SD card playback...19 4.5.18. Record path...19 4.5.19. PTZ settings...19 4.5.20. Log...20 5. MOBILE ACCESS...20 5.1. SMART PHONE ACCESS...21 6. OTHERS...24 6.1. PORT FORWARDING SETTINGS IN ROUTER...24 7. FREQUENTLY QUESTIONS...26 8. PRODUCT WARRANTY...27

8.1. WARRANTY INSTRUCTIONS...27 8. 2. WARRANTY CARD...28

1.General introduction 1.1. Brief introduction This series products are designed for network video surveillance system, including wired box IP camera, wireless box IP camera, IR dome IP camera, IR waterproof IP camera etc..they adopt high performance chip to ensure high quality media processor which can process audio and video collection, compression and transmission at the same time. Standard H.264 compression format makes video transmission clearer and smoother. It enables users to realize both the real-time monitor and remote control via browsers like IE, Super-Client software and Application Platform. It has good stability and compatibility. It is easy to install and operate. Users only take a few minutes to connect the IP camera to the network. 1.2.Applications The series products usually can be applied to public places, such as big departments, schools, factories, workshops, etc. High-end cameras are more suitable for the environments where powerful image processing ability and high definition are needed, such as banks, crossroads. Before install the IP camera, please check whether the product accessories are all in your package, if not, please contact the distributor as soon as possible. List of articles: IP camera.1 Bracket (to be equipped by the model) 1 WIFI antenna(for wireless model)..1 Power adapter..1 Qualification certificate...1 CD 1-1 -

1.3 Appearance and interface 1.3.1 Product appearance 1.3.2 Interface introduction Tail-board of interface: Electric light: often bright when power supply is turned on Network light: often blaze with data transmission when power supply is turned on RJ-45 Ethernet port: can be used to connect IP camera with your LAN by network cable I/O interface: alarming input, connect T3 and T4(input side grounding triggers a low lever efficiently), TL control output,connect T1 and T2 Power: DV 5V Warning :Please use the attached power adapter to avoid damaging the IP camera. - 2 -

2. Function introduction 2.1. Basic function introduction IP camera is mainly used for remote video transmission on the network. It adopt H.264 hardware compression technique, which can realize high-quality and real-time video transmission at 25fts speed on LAN/WAN. IP camera runs on the entire opening standard TCP/IP protocol, built-in web server makes users easy to realize monitoring via IE, configuring remotely, updating firmware, managing and maintaining the equipments via network. It allows you to monitor, control and zoom the image though the internet at anytime anywhere. 2.2. Advanced function introduction * Adopt the latest and High-density programmable multimedia processor, support H.264 Main Profile video coding * Support up to 25 fps * Adopt H.264 video compression format, which can realize high-quality image transmission through limited network bandwidth * Support up to 10 users viewing simultaneously * Built-in web server allows the use of standard IE browser for real-time monitor and management * Some models support Wi-Fi 802.11b/g wireless network * Support system upgrade remotely * Support dynamic IP address, LAN, and Internet (Router access etc.) * Some models support one or two way audio talk back * Support motion detection function, detection sensitivity and alarming periods can be set * Support email sending when alarming, FTP uploading, calling preset, external outputting * Support local TF card video storage, can video when alarming and set the fixed time to video * Support 15 preset positions * Built-in guard dog, auto recovery if exception occurs and auto-connection if the internet is disconnected. * Support mobile view Specifications System Features System security Self-prepared DDNS(Free) IE multi-screen client(free) Account, password authority management Built in free DDNS system, like http://demo.ipcam.so,'demo' is serial code No need to install software, IE multi-camera monitoring and management, message alarm setting, save alarm picture - 3 -

Mobile view Support iphone Windows Mobile Symbian Android view directly, support mobile phone with Java MIDP 2.0 CPU Video Audio Operation system Embedded Linux system Microcomputer processor High-density and programmable media processor Hi3512 Compression format H.264 Resolution Image adjustment Processor Audio gain CMOS model:vga(640*480), QVGA(320*240) Brightness, contrast, saturation. Two way audio (support external connecting MIC and sound box) AGC P/T control Built in P/T Support 15 preset positions, can adjust (10 class rotation speed) Network System requirement Network interface RJ-45 10/100Mb self-adaptable Ethernet slot Delay time Online visitor IP mold System configuration Certification Certificates ISO FCC CE < 500 MSEL(0.50 second) in LAN Support up to 10 users viewing simultaneously Dynamic IP address, static IP address, PPPOE Microsoft Win98 SE/ME/2000/XP/Vista /Win 7 Mac OS Internet Explorer/Mozilla Firefox/Google Browser 2.3. System requirements Minimum Hardware Configuration CPU : Pentium 1.6Ghz Memory : 256MB Sound Card : Necessary for audio monitoring and two-way talking Hard Drive : To record video, minimum 40G Software environment System: 32 or 64 bit Windows2000/WindowsXP/Windows2003/Windows Vista/Windows 7,Mac OS etc. Browser: Internet Explorer/Mozilla Firefox/Google Browser TCP/IP network protocol Tips:If your IP camera is connected to network, you can visit the IP camera directly by free DDNS Service - 4 -

3. Installation According to most of usage mode, we summary 2 kinds of networking ways to connect IP camera. Before you install the IP camera, please install hardware and set software, the steps are as follow: The following is the overall chart of two connections:: 1. Connect an IP Camera to a router 2. Connect the IP Camera to the computer directly 3.1. Connection of network cable and power adapter Step 1: Connect the crystal head of network cable to RJ45 interface of IP camera Step 2: Connect the power adapter to the electrical outlet of the IP camera and power on - 5 -

Warning: Make sure use the attached power adapter, unauthorized ones may damage the IP camera. Check whether the mains voltage (110V or 220v) and frequency (50x or 60x) of your location is matched with the description of the label on the power adapter, if not, don t use it! 3.2. Connect IP camera to router/switch/hub with network cable Connect the other side of the network cable to Ethernet switch, router or IP sharing device. Check the Ethernet connection of RJ45 interface and if the orange LED light is on or not, if connecting the LAN successfully, the LED light will be on. If there're any data transmission or network activities, the green LED light will flash. After about one minute, under normal conditions, the yellow is normally on, and green light flashes, here physical connection of the IP camera is complete.(for smooth connection, it is recommended to set up the IP camera to a fixed IP in the same network segment as PC within the LAN. Please refer to Article 8 Frequently Questions for setting). At this time, IP camera communicates with your network which accesses to visit. Now you can login the main web page and visit the IP camera. 4. Access to IP camera 4.1. Access to IP camera though web page After IP camera is connected to PC LAN through router, you could operate IP camera via PC, first please put right CD to CD-ROM and install and run on the related software. - 6 -

4.2. Use Finder Open the disk, CD will run automatically, and then appear the following interface: If network cable and power supply are correctly connected, device type, name and IP address will be shown in the device list (Otherwise, please confirm whether power supply and network cable work normally or not). In the interface above, the configuration information of the current computer is listed on the left side; the network configuration information of the selected camera is listed on the right side. Default IP address of the IP camera is 192.168.1.126, and HTTP port is 81. Inner Access refers to the LAN access address; Outer Access refers to the WAN access address. Tips: Port forwarding setting is necessary for outer access, please refer to router port forwarding in 7.1 section. - 7 -

Note: 1. Device information indicates the IP camera information. 2. When the current computer has a fixed IP, (namely non-dhcp IP), and the IP camera is used for the first time, please click automatic setup, so that IP address of the IP camera, gateway and DNS can be synchronous with the PC. 3. If it is necessary to manually modify the contents including camera name, HTTP port, IP address, sub mask, gateway, primary DNS server, secondary DNS server and so on, please click apply after modification, and then click OK after entering username and password of the IP camera in the pop-up dialog box for access validation. 4.3. System login Open the Web page. You can open it directly by clicking the Inner Access or Outer Access on Finder and then clicking Open. You can also directly input the corresponding address of the inner and outer access into the address bar of the web page, as the address shown in the picture above http://192.168.1.126:81 (LAN); and http://aodn.ipcam.so (WAN). If the IP camera has been connected with the outer network when you are browsing it, the log-in interface as below will appear when you open the web page through LAN or outer work.: - 8 -

Input the authorized user name and password, the default user name of the camera is admin, password is empty. The following page will be shown after correct password authentication When you visit IP camera in the first time, it will make you choose the corresponding language automatically according to the language version of the current web browser, other languages can also be selected. Active X mode: this module has the most functions and the best effects. It can be visited via Internet Explorer, it has high performance with local video and two way audio talk back, it can run normally only by installing plug-in Active X. VLC player mode: this mode applies VLC media player of the third party video player VideoLAN. ipod touch / iphone 2G,3G,3GS,4 and ipad for special use: this mode is designed especially for the mobile terminal, such as ipod, iphone. It's only used for watch and it doesn't have the function of setting IP camera. No Plug-In mode: this mode is mainly used for some smart phones and can easily realize its function. This page no longer displays next time: after click to this option, this chosen page will not display anymore when you visit IP camera next time, but directly access to the corresponding video to watch page. Note: 1. the default User Name of the camera is admin, Password is empty. 2. The chosen information such as language, this page no longer displays next time is saved in the - 9 -

local temporary files of web page browser. When you delete the history files in the browser, the chosen information will lose relatively. 4.4. Function operation The following Internet Explorer (IE) mode will present the function of IP camera. The picture below is the main interface of video watching. If it's the first time to visit this page, you are required to install plug-in. Click to download, then click to refresh after downloading and installing plug-in. After logging on the device, monitor picture is displayed on the left side of the screen, and the right side is the panel where you can implement the basic operations for the device. :After P/T rotates all around, it returns centre place : P/T cruises left and right :P/T cruises up and down : Pictures reverse up and down : Pictures' image in the left and right side : Alarming output switch--- turn on : Alarming output switch--- turn off - 10 -

:Single screen, four screen, nine screen display Mode: be set according to the frequency of fluorescent light, if it's not the same as frequency of fluorescent light, the picture will bring cross striations. Frame rate: maximum video frame rate, if the network broadband is low, you can choose lower frame rate. Lightness, contrast ratio: adjust the lightness and contrast ratio of screen. Preset position call: click it, it will show preset position list. It will call one number's preset position when clicking one number. Preset position setting: first revolve the IP camera to the fixed position, then click to call, next click one number and save up the current position. :Monitor, can listen to the live sound of the IP camera :Talk back, speak to the computer you watch, IP camera can make live play :Video, video to the local hard disk, please refer to the path device of video storage at 5.5.18 :Take photo, click it, and open one new browser window with picture capture :Enter into the device interface 4.5. IP Camera settings Click the device button of the right hand corner of control panel, then enter into the device interface. 4.5.1. Camera information Show the information of IP camera's fixed version, condition and SD card. - 11 -

4.5.2. Alias settings The name of IP camera, it's used for displaying in finder, web page title and multi-camera watching. 4.5.3. Data & Time settings It's used to device the inner time of IP camera. When SD card videos, it names the video file according to this time. If you synchronize time with NTP server, please make sure IP camera's gateway and DNS server parameter are effective. - 12 -

4.5.4. Users settings Set the IP camera's access account and password. Add up to eight users' information all together. 4.5.5. RTSP settings Set RTSP authority. If you visit IP camera by means of RTSP when setting authority verification, you are required to input the user name and password. 4.5.6. Multi-Camera settings When you visit the current IP camera, you can also watch other cameras in the same interface. The following is the interface set other cameras. - 13 -

If you device IP cameras in the same LAN, you can add more by using finder. First click any lines you want to add, e.g. The 2 nd, then click the 2 nd camera, next put down camera's IP address and other info in the info form shown as below When you finish filling out info, click add button. After adding all lines, finally click the Add button below to save info in the camera. Consequently, clicking the button of our screen or nine screens in the video watching interface, you can watch simultaneously. Pay attention, multi- camera view only supports IE mode at present. 4.5.7. Basic network settings Set the IP camera's IP Address, sub mask address, gateway, DNS server, HTTP port. - 14 -

4.5.8. Wireless LAN settings The following is the wireless connection device picture. Now there are five kinds security modes: WEP WPA-PSK and WPA2-PSK. When wirelessly accessing to Internet, camera's SSID number must be the same as the one of wireless AP devices like wireless router. If the wireless router has run, first connect the network cable to the IP camera and open the camera's page by computer, then enter into the device interface of wireless LAN, click button search, camera will search radio signal. After finishing, choose the wireless router which is needed to connect. If the authority verification has been set, input the login password, next click button submit to save settings. At this time, the camera will restart, taking out the network cable, after finishing restart, you can visit camera again with correct device. 4.5.9. PPPoE settings If in practice use, IP camera which is necessary to set PPPoE parameters firstly is directly connected to modem, or is connected to the device which needs PPPoE dialing-up. - 15 -

4.5.10. UPnP settings After starting UPnP, IP camera makes port forwarding in router automatically to visit the camera at the back of router in Internet. 4.5.11. DDNS service settings If you want to access remotely to IP camera, which doesn't have stable outer IP address, e.g. by means of dialing-up Internet. To access remotely to IP camera more conveniently, you can use camera's own DDNS. IP camera has its two DDNS, one is provided by factory, the other is the third party's DDNS system like DynDns. When leaving factory, every camera, which is allotted one DDNS is directly used by users without application and configuration. Meanwhile, users can also use the third party's DDNS, choose the relative service and fill in the corresponding account information. 4.5.12. Video setting Set the IP camera's picture size, rate mode, key frame distance, picture quality and bit rate. - 16 -

4.5.13. Mail service settings Mail server is mainly used to make email notification in case of alarming When alarming, you can set the function of sending email.. Sender: send the email address Receiver 1, 2, 3, 4: receive the email address SMTP server: send the mail server address, you can scan corresponding helps like sending emails to check the specific parameter value. SMTP port: send the mail server port, normally is 25. Need Authentication: whether it needs authority verification or not to send email. Common mails are required to authenticate. You need to fill in the mail's login account and password generally. Test: after clicking test, IP camera will test the mail sent. Note: You need to configure the gateway and DNS server of basic network settings correctly. 4.5.14. FTP service settings FTP server is mainly used for uploading the live pictures to FTP sever in case of alarming. FTP server: the address of FTP severs. FTP port: the pot of FTP sever, normally is 21. FTP user, password: the account and password of FTP. FTP upload folder: pictures are saved in the subdirectory of FTP sever. FTP mold: select according to the mold which FTP server supports. If the IP camera is at the back of router, it adopts the passive mold generally. - 17 -

4.5.15. Alarm service settings Set the alarming function. IP camera supports motion detection and outer alarming input. The motion detection means IP camera detects the live picture. It will call alarm in case circumstances change. You can set 10 class sensitivity. The less class, the high sensitivity. Alarming action includes preset, alarming output, mail notification and FTP uploading pictures. You can set the time period of alarm call allowed, that means it only calls alarm at the given time period. You can set according to the date within one week and 24 hours a day. Clicking the time check means allowing alarm. 4.5.16. SD card record Set some parameters of SD card record Record cover: when SD card has been completed, make sure if it deletes the old record automatically or not so that writing new data recorded. Record for alarm GPIO: begins recording when alarm calls from external input. Record for alarm motion: record when alarming. Record for timer: record at a given time period. - 18 -

4.5.17. SD card playback When recording video on SD card, you can download and playback in long distance directly. Clicking download and save it to the local hard disk, then play it by VLC player. VLC player downloading address: http://www.ipcam.so/download/vlc.exe. 4.5.18. Record path When browsing video by Internet Explorer, you can record it into the local hard disk by using plug-ins. You can set the video record file here. 4.5.19. PTZ settings Set PTZ, signal lamp, etc. After signal lamp lighting up, the green LED of camera's head will flash. - 19 -

When stating, it moves to centre place automatically. Every time when IP camera restarts, it will turn to the centre horizontal position and upright position automatically. Going centre motion is mainly used for positioning. If you don't start this device, the pre-bit function will not be precise. PTZ speed: the rotation speed of camera's horizontaland upright cruising. Upward speed, downward speed, leftward speed and rightward speed: the rotation speed of controlling camera manually. 4.5.20. Log Record the operation log of IP camera 5. Mobile Access First of all, the mobile phone must open the internet access function. - 20 -

5.1. Smart phone access The smart phones are the mobile phones with operating system, such as Windows Mobile and Symbian. Due to their powerful function, the web page browser of such phones usually supports JavaScript. That s why they can visit the dynamic screen of IP camera through web page browser. First of all, the mobile phone must open internet access function. Use the browser on the phone to visit the address of the IP camera, e.g. http://demo.ipcam.so ( demo is the Serial No. Each device has only one Serial No) Next, taking the Opera mini 4 Version on Windows Mobile as an example, we are going to present the whole procedure. 1. Enter access address http://demo.ipcam.so in the browser address bar, the following interface will appear: 2. Input the Username and Password of the device, and the following interface will appear. There are four log-in options. Click to the third Sign in and use Mobile Phone mode. Language is used to select the display language. Do not show next time: When this option is selected, this interface will not appear when you log in - 21 -

next time. Instead, it will directly skip to the monitor image. Description for the monitor image: - 22 -

Instruction for the key function: Update: it is used to refresh the page. If the monitor picture is kept still, you may press this key to update the page. Up, down, left, and right: They are used to rotate the camera P/T. The camera without P/T does not have these keys. Stop: Stop to rotate the camera P/T The download address for the mobile browser Opera mini: http://mini.opera.com. Download the Opera mini browser according to the mobile model. - 23 -

6. Others 6.1. Port forwarding settings in router When a IP camera accesses to outer net remotely via internet which is connected to router, port forwarding in router is a must, port forwarding is also called port mapping,or virtual server. Different brands' routes have different names, but the operation is much the same. Take the TP-LINK TL-R410 router port mapping setting as an example to illustrate. To set up IP Camera as an example: router inner web IP is 192.168.1.1, IP camera inner web address is 192.168.1.50, and port is 85. 1.First log in router web administration interface. 2.Click Advanced Setup in the left side and + in front. 3.Click virtual server in the unfolded menu. 4.Fill 85 under the right port start, fill 50 in Server IP address, protocol select TCP, finally don t forget to tick under apply and click save. Please refer to the following picture. When completing port forwarding, you can visit camera - 24 -

through device code in outer net remotely. Common router default visit address 1. DLINK ex-factory definition router address is 192.168.0.1 2. Linksys ex-factory definition router address is 192.168.1.1 3. 3com ex-factory definition router address is 192.168.2.1 4. Microsoft ex-factory definition router address is 192.168.2.1 5. Net gear ex-factory definition router address is 192.168.1.1 6. Asus ex-factory definition router address is 192.168.1.1-25 -

7. Frequently Questions Question: Why the camera can t be found with a search bar? Answer: 1. Please check whether IP camera and the computer in which the Finder is located place in the same LAN network or not. 2. Web cable or power connection also leads problems (under normal condition, power light (yellow) always lights up, network light (green) always flashes.) 3. Whether a firewall is installed in the computer in which the Finder is located. Question: Does the H series allow the users to browse dynamic video through mobile phone? Answer: Yes, H series can be viewed the dynamic video through smart mobile phones Question: How can you set the IP camera and PC into the same segment within the LAN? Answer: After finding the camera with the search bar, click the Automatic Setting button. Question: Why the mobile access software can t visit the IP camera? Answer: 1. Make sure whether the mobile phone has opened the internet access function or not, be sure to set correct internet access options. 2. Make sure that the IP camera can be visited through Internet. - 26 -

8. Product Warranty According to the Warranty Card, any breakdowns resulted from the product itself under normal using condition are covered by free maintenance within the warranty period. 8.1. Warranty Instructions a) The Free maintenance period of the product is one year. Users can enjoy free maintenance service (Non-artificial damages) by this card within the warranty period. Maintenance fee will be charged for the maintenance beyond the warranty period. b) Breakdown caused by misuse or other reasons or that beyond the warranty can be repaired by this card, free of maintenance fee, and only the cost for component replacement will be charged. c) When the product needs maintenance, it shall be submitted to the manufacturer or local distributor together with this card. d) Products with their shells taken apart or sealing labels torn up without authorization are beyond the warranty range. e) Breakdown of machines caused by modification or addition of other functions is refused to be repaired. Free Maintenance will not be available in the following circumstances: a) Normal wear and tear caused by periodic inspection, maintenance, repair or replace of components. b) Damages caused by falling, extrusion, artificial immergence, moisture or other artificial reasons. c) Damages caused by flood, fire, lightning and other natural disasters or force majeure factors. d) Machines has been repaired by unauthorized maintenance center. All above terms, if there are any changes, are subject to relevant regulations. - 27 -

8. 2. Warranty Card Please fill out the following form, then cut it off and return it to us together with the product. Product Model Release Date User Company User name User Address Tel. No. Maintenance Date Breakdown Conditions Maintenance Result Remark: - 28 -