Cleaning Technology Municipal Technology Clean solutions for every application
Hako provides technical solutions for your cleaning and municipal requirements Your faith in our products and services has made Hako one of the leading suppliers of high quality machines and vehicles for use in cleaning and municipal technology. Each day we start afresh, developing pioneering innovations for even more efficiency, more consideration for the environment and more user friendliness!
The Hako 5-star advantage More reliable, economic and satisfied Thinking and acting for the long-term pays dividends for you and it may be quicker than you think. For over 60 years, professionals have put their trust in Hako and profitted from a complete package including performance, quality and reliability. While certain bargains quickly emerge as bad investments, the Hako 5-star advantage puts you on the safe side. Permanent availability of the machines Transparency of costs and high efficiency Intelligent environmental consideration Financing and procurement alternatives Top solutions, service security with guarantee Robust technology and quality Made in Germany Very service-friendly GPS controlled, mobile service management around-the-clock, 24/7 Over 650 service technicians throughout Europe Modern diagnostics systems Overnight spare parts supply Building-related economic efficiency calculations Guaranteed service life costs Systems for increasing productivity and efficiency such as DTC quick charge technology, filling and dosing systems, AquaControl, ABBA or R 2 S Multipurpose machines Low or no chemical cleaning with Chemical on Demand and AquaForce Reduction of water consumption through AquaControl Reduction of emissions of dust and exhaust gas Optimised low-noise design, optional Silent Kit Antibacterial feature for tanks (Antibac ) Based on your requirements, e. g. Leasing Hire, hire purchase Seasonal hire for summer/winter Opti-Hour: invoicing on an hourly basis Top used machines with guarantee Excellent product solutions for all areas of use Hako-Fleet-Management-Solutions, e. g. Hako-Fleet-Report Partnering professionals for more than 60 years Certifications, attestations Hako academy for training and further training technical advisers, service technicians and users Long service life, upgrading used machines, recycling capabilities
Hako a recognised name for cleanliness worldwide At home in over 60 countries around the world What initially started for a market especially aimed at North Germany is now present in over 60 countries around the world: Hako machines benefits the lives of millions, providing superior technology for a cleaner, better environment. We offer a solutionoriented, innovative product philosophy and timely adaptation of the distribution and service organisation to new market developments are the cornerstones of Hako s strategy. They represent the foundation of one excellent positions in numerous markets and product sectors. At the start, we didn t just simply raise the Made in Germany quality flag, but also defined our own commitment to Quality made by Hako. We have monitored it constantly ever since through continual controls and, in the meantime, have been certified in accordance with EN ISO 9001.
Din EN iso 9001:2008 Din EN iso 14001:2009 Hako, quality which pays Din EN iso 9001:2008 Din EN iso 14001:2009 Hako, top quality certified by the TÜV Hako places customer benefit at the focal point even during the construction phase. Increased productivity, robust construction, easy operation and service, high performance and long service life are just a few of the features which influence our business activities and ensure an enduring, troublefree deployment of our machines. Our aim is the highest level of customer satisfaction and this is why Hako became one of the first companies in the sector to introduce a quality management system certified in accordance with EN ISO 9001. Modern production plants and highly qualified employees are integral components in the increasing success of the company.
Hako Top-Service always available, always safe At Hako, it s not the number of customers that s important, it s their satisfaction This is provided by first class product quality and reliability, ideal ergonomics and operability as well as efficiency and long service life and, most importantly, by the Hako Top-Service. It presents you with a tightly-knit distribution and customer service network. For example: We have 650 service technicians distributed throughout Europe, who can be reached around the clock using GPS controlled resource planning. Another positive aspect of the Hako Top-Service option is our efficient spare parts logistics, which has the capability to supply spare parts overnight in urgent cases.
Our offers for even more efficiency and safety After-sales services FullService Service contract Permanent machine availability at guaranteed service life costs Clever savings with the usagedependent flat-rate service costs A monthly flat-rate instead of nasty surprises: Our convenient Hako FullService package ensures maximum machine availability and enables you to calculate your maintenance costs in advance. The Hako FullService includes all regular, operating hour-related maintenance work, wearing parts and additional expenses for travelling time and mileage costs as well as the prescribed safety inspections. In addition, the Hako FullService option includes the immediate clearance of faults including spare parts! By concluding the Hako service contract, you get just the service you need and at extremely attractive conditions. Instead of operating according to rigid maintenance schedules, our inspections are based on machine usage. A service appointment can be omitted in the case of low machine usage. However in the case of high utilisation, inspections occur more frequently to reliably ensure machine availability. Each service costs the same, including all the wear and spare parts! Journey times are also at attractive flat-rates. Extended warranty Up to 36 months more reliability with the Hako insurance cover Even in the case of superior technology, certain residual risks for the buyer cannot be avoided. If you want to eliminate this risk you can draw up an additional guarantee insurance with Hako for 12 or 24 months after the period of warranty has expired and, thus, cover against potential future cost risks. The extended warranty is also available for Hako used machine. Fleet accounts Hako can compile all your machines in a single invoice As a Hako customer, you can choose to receive an overall invoice per invoicing period which contains your entire vehicle fleet compiled rationally and clearly. This is particularly practical, for example, when your machines are used in the separate buildings of a contractor; if this is the case you will receive a single invoice containing all the machines which need to be processed.
Procurement alternatives for tailor-made investments Purchase Hire purchase Hire Seasonal hire Use liquidity absorption and amortisation options Hired and still your property from the beginning Avoid overcapacities, cater for peak demand Vehicles for summer and winter service at calculable rental charges To buy or not to buy? In essence: Whoever plans in the long-term, wants to invest in his own company and use tax amortisation options, buys. This applies even more so when the machine in question is used for longer or more frequently. If you wish to hire but also aquire economy ownership of the hired machine, you can do so the option of hire purchase. On payment of the last hire purchase instalment, the civil ownership rights are also transferred. An interesting option for those who don t just want to use the machine but also want to acquire the economic ownership immediately. If you need to be more flexible in your planning or don t want to keep your capital, but still need to be able to complete contracts received at short notice, such as building completion cleaning, it is well advised to hire - even for just a few days. NB: Rental charges are deductible as operating expenses. There is an interesting financing alternative for municipalities, towns and communities in respect of providing technical equipment for municipal maintenance departments: the Hako seasonal hire service. During the period from 1 November to 31 March, you can hire a winter service vehicle at an attractive monthly fixed rate. In spring it can be converted for summer deployment and simply rented again.
Leasing Municipal leasing Opti-Hour Rental Use without any capital commitments and ownership-dependent taxes Investment from the administrative budget instead of the capital budget You only pay for the effective operating hours with or without FullService A leasing option with even more security through FullService and mobility warranty Leasing promotes liquidity. Investments can be realised immediately, the obsolescence risk is reduced. The leasing rates are deemed operating expenses and immediately deductible. They provide a clear basis for planning and costs and, therefore, a reliable basis for calculations. Since the revenue from deployment is normally higher than the leasing rate, the machine finances itself from the revenues generated. Hako has many years of experience so, consult with us! Operate leasing The advantages of Hako municipal leasing are now exploited by several local authorities. It was specially conceived for municipalities and opens up the opportunity to execute efficient, individually necessary investments. The leasing rate is charged exclusively to the respective administration budget and not the capital budget. As a result, municipalities can also respond flexibly to demands received at short notice and return the machine following completion of work without any problems or additional costs. You can also use the Hako Opti-Hour service to organise your costs according to performance. In this case, you only pay for the machine when you actually use it. Obviously, you must achieve a specific minimum deployment time and the offer only relates to certain machine sizes. Study this offer in detail, it s worth it! Rental combines leasing and FullService. As a tax-reducing operating expenses, rental safeguards your operational readiness. You work exclusively with new machines and need no longer bother about maintenance and repair costs or the risk of a machine breakdown. The optional mobility warranty provides even more reliability in the area of hand-operated Hako machines. Even less procurement risk, right of return after just 12 months Top used machines The Hako Operate Leasing service is optimal for service providers because cleaning contracts are often awarded as yearly contracts with an extension option. In the case of operate leasing, you conclude a 36-month leasing contract containing an opt-out clause after one year. A good way of reducing risks and putting your money on modern equipment to achieve a competitive advantage. Purchase, hire or lease machines, all inspected and with guarantee A new machine is not always necessary. Just consider, for example, contractual extensions or necessary deployment received at short notice, or the immediate strengthening of your vehicle fleet by a machine of the same type. The Hako used and hire machine centre in Hürth always has a large selection of machines available in various performance classes all inspected, overhauled as necessary, classified according to levels of capability and with guarantee! Hako top used machines, a good possibility to save your capital and extend your deployment options.
Hako-Fleet-Management-Solutions Hako-Fleet-Recorder Hako-Fleet-Report 1 2 3 service intervals inspection financial status Your machinery under control Gain transparency Increase profitability You need to keep on top of all sorts of data in order to run your machines efficiently. Hako-Fleet- Management-Solutions help you to keep a good overview of your machines. Easy data evaluation enables optimized machine deployment and reduces downtime. As a service supplier, you can provide your customers with a complete documentation of the actual working hours while maintaining a detailed overview of your entire fleet of machines. Hako-Fleet-Recorder Detailed overview at the push of a button The innovative system records the operating hours as well as any other operating status of your machine and transfers the data to the Internet for further graphical processing. The system enables you to analyse via PC or smartphone data such as: which user has operated which machine at what time, whether the machine is showing any error, where the machine is currently located (via GPS) and much more. Keep on top of your machinery at the push of a button at any time and place. varied users electronic key identification Hako-Fleet-Management-Solutions Hako-Fleet-Report Detailed machine data data transfer to web portal data retrieval via Internet browser with PC and smartphone recording of all relevant machine data The Hako-Fleet-Report provides you with detailed information on all Hako machines in your fleet. The web portal spares you the time-consuming work of building-up and maintaining your own data base. Information on maintenance intervals and financial aspects is available at any time on the Internet, automatically updated and stored by Hako. The graphical display and an intuitive user interface save you and your staff lots of time and effort easy and simple, no user training necessary.
Hako a clean future Superior technology for a cleaner, better environment Hako has been committed to the subject of environmental protection for many years, both in terms of saving resources and material sustainability as well as recycling. Since 2004, we have been certified in compliance with EN ISO 14001. But, what we have achieved only acts as the basis for further steps. Therefore, environmental aspects are taken into consideration even during the development phase of new machines and are integrated as environmentally beneficial innovations in our products. The fact that most ideas also increase efficiency is a welcome side effect and their introduction is standard. This means, for example, that Hako AquaControl can be used to save up to 50 % of water and cleaning agent while tailor-made dosing systems prevent faulty dosages. Other examples include the Hako PowerFilters which allow you to clean up dirt and dust without swirling up dust. The special filter systems have a filtration efficiency of up to 99.5 % ensuring clean exhaust air. High-performance battery systems, modern LPG (liquified petroleum gas) drives and economical diesel engines compliant with Euro 5 are further examples. Thus, operating in environmental zones represents no problem. Even ears benefit from the integration of effective noise protection measures. As a result, Hako urban cleaning vehicles with optional sound insulation can be deployed at night outside the time restrictions asserted by Noise Prevention Regulations including in areas sensitive to noise. Din EN iso 9001:2008 Din EN iso 14001:2009
Cleaning Technology Sweepers, vacuum-sweeper machines or scrubber-driers: Hako is a highly competent contact partner for all indoor and outdoor cleaning work. It offers various hand-operated machines, ride-on vehicles and innovative solutions, e. g. Hako DaytimeCleaning for long, economic working or Hako-AntiBac for use in hygienically sensitive areas. Regardless of what you are looking for: Hako has got the right solution! Page 12
Cleaning Technology Municipal Technology Sweepers and vacuum-sweepers Forward and overhead throwing Working tools and main brushes High-performance dust filter systems Products Sweeping machines are differentiated by being either forward or overhead throwing machines. In the case of the forward throwing principle, the dirt is swept up from the floor as when using a dustpan and brush and is, therefore, well-suited to cleaning up heavy dirt and waste. In the case of the overhead throwing principle, the dirt hopper is filled from above and utilised to the full, it must be emptied much less frequently. This principle is excellent for clearing up large volumes of light dirt. The main brush of all vacuum sweeper machines is in a cylindrical form. Regardless of the layout of the rows of bristles, each production series provides an optimum sweeping performance and dirt filling, low dust production and a quiet, low-vibration brush operation. The patented cylindrical brush support and wear compensation systems ensure simple changing of cylindrical brushes and constantly good sweeping results. All the filters used by Hako are compliant with IEC 60335-2-69 and guarantee a filtration efficiency up to 99.5 %. Special filters are available for certain selected machines to provide a higher filtration efficiency. Suction turbines with optimised performance ensure a larger filter operating time and constant high level of dust collection. Effective resonance cleaning systems reliably ensure good filter cleaning to restore the initial filter performance. Walk-behind sweepers Pages 15-18 Ride-on sweepers Pages 19-24 Batterysysteme and accessories Pages 25-26 Page 13 Sweepers and vacuum-sweepers
Sweepers and vacuum-sweepers Reliable cleaning of company premises from 2,300 to 25,000 m 2 cleaned/hour Ideal for cleaning company floors and grounds: sweepers and vacuum-sweeper machines from Hako. Both the walk-behind and ride-on sweepers ensure dust-free cleanliness, e. g. in small and large warehouses, various types of factory halls, outdoors in a car park or indoors in an underground car park! Profi-Flipper Hamster 500 Hamster 650 Hamster 800 Jonas 800 Jonas 900 Jonas 980 Jonas 1200 Jonas 1500 Jonas 1900 to 2,300 m 2 /h to 2,400 m 2 /h to 2,600 m 2 /h to 3,400 m 2 /h to 6,660 m 2 /h to 7,200 m 2 /h to 7,200 m 2 /h to 13,200 m 2 /h to 16,200 m 2 /h to 25,000 m 2 /h Walk-behind sweepers and vacuum-sweepers Ride-on sweeper and vacuum-sweeper vehicles Page 14 Sweepers and vacuum-sweepers
Profi-Flipper This manually operated sweeper has an unequalled high sweeping and collecting capacity for up to 2,300 m 2 /hour. The Profi-Flipper is equipped for use on small areas being fitted with an indestructible plastic dirt hopper on which there is a 5 year warranty, an impact-resistant steel frame and solid aluminium housing. The handle can be adapted optimally to every user through the ergonomic shape and simple turnaround of the handle guide shafts. Area coverage up to 2,300 m 2 cleaned/hour Profi-Flipper Technical Data Profi-Flipper Sweeping width / with side brush cm 48/67 Area coverage m 2 /h 2,300 Dirt hopper volume l 40 Weight, ready to use kg 24 Width mm 790 Length / with handle shaft mm 1,330/1,550 Height / with handle shaft mm 900/1,060 1. The side brush sweeps the dirt thoroughly from corners and borders directly into the path of the wide cylindrical brush 2. The dirt hopper can be removed without any tools 3. Simply hold it by the recessed grip and shake it to empty waste in the bin Page 15 Walk-behind sweepers
Hamster 500 E The smallest motorised sweeper in the Hako product range for use on all hard and carpeted floors and an amazing area coverage of up to 2,400 m² cleaned/hour. The large, fully exploitable dirt hopper with a capacity of 40 litres and the efficient filter system enable the Hamster 500 E to complete demanding sweeping tasks. Its extremely simple operation and convenient features ensure work is easier and more efficient. Area coverage up to 2,400 m 2 cleaned/hour Hamster 500 E Technical Data Hamster 500 E Sweeping width / with side brush cm 40/60 Area coverage m 2 /h 2,400 Dirt hopper volume l 40 Filter surface m 2 1.2 Power output W 210 Sweeping speed km/h 4.0 Weight, ready to use kg 51 Width mm 700 Length mm 880 Height mm 600 1. Onboard charger for uncomplicated recharging at any power socket 2. Clear control indicators with easy to understand symbols Page 16 Walk-behind sweepers
Hamster 650 The Hamster 650 V and Hamster 650 E are extremely manoeuvrable highperformance, compact vacuum-sweeper machines. Their robust construction is apparent when completing everyday work, e. g. the non-corroding, coated steel frame, the shock and impact resistant plastic cover and overhead throwing principle. Its powerful petrol engine (650 V) or battery drive (650 E) means that the Hamster production series can be deployed almost anywhere. Area coverage up to 2,600 m 2 cleaned/hour Hamster 650 V Technical Data Hamster 650 V 650 E Sweeping width / with side brush cm 50/70 50/70 Area coverage m 2 /h 2,525 2,525 Dirt hopper volume l 35 35 Filter surface m 2 1.5 1.5 Power output kw 2.6 2.6 Sweeping speed km/h 5.0 5.0 Weight, ready to use kg 105 122 Width mm 685 685 Length mm 1,110 1,100 Height mm 715 715 1. The Hako-Hamster 650 V with petrol engine is ideal for outdoor use 2. The dirt hopper is extremely easy to remove, empty and replace Page 17 Walk-behind sweepers
Hamster 800 As with the smaller Hamster production series, the Hamster 800 series was developed either fitted with a battery drive (800 E) for indoor use or fitted with a combustion engine (800 V) for outdoor use. The distribution of the dirt hopper volume into two separate containers, which can be carried like buckets, ensures that they can be emptied conveniently. Area coverage up to 3,400 m 2 cleaned/hour Hamster 800 E Technical Data Hamster 800 V 800 E Sweeping width with side brush cm 67/87 67/87 Area coverage m 2 /h 3,350 3,350 Dirt hopper volume l 2 x 25 2 x 25 Filter surface m 2 1.5 1.5 Power output kw 2.6 0.55 Sweeping speed km/h 5.0 5.0 Weight, ready to use kg 112 165 Width mm 800 800 Length with shaft folded mm 1,100 1,100 Height with shaft folded mm 715 715 1. Dust-free sweeping both indoors and outdoors 2. The battery in the Hamster 800 E can be recharged at any power socket 3. Take it easy: The 50 litre dirt hopper is divided into two parts for easier emptying Page 18 Walk-behind sweepers
Jonas 800 When considering the dust-free cleaning of small and medium-sized areas, you can t do better than the Jonas 800E. It works according to the overhead throwing principle which ensures the hopper is filled to the full. This promotes uninterrupted work and a constant, first class sweeping performance. To ensure the machine continues to provide consistent cleaning results, the filter in the insert can be shaken clean. To clean it after completing work, it can be accessed from the clean side easily and quickly. The robust, steel frame construction in heavy-duty quality means the Jonas is a machine for professional use which can clean surfaces thoroughly and efficiently for a number of years! Area coverage up to 6,660 m 2 cleaned/hour Page 19 Jonas 800 Ride-on sweepers and vacuum-sweepers Technical data Jonas 800 E 800 E 2 SB Drive Drive motor V/W 24 /600 24 /600 Sweeping drive V/W 24 / 600 24 / 600 Battery capacity Ah 105 105 Sweeping width cm 67 67 Sweeping width with side broom cm 89 111 Sweeping speed km/h 6 6 Sweeping performance mm 5,340 6.660 Filter surface m 2 1,5 1,5 Dirt hopper l 2 x 25 2 x 25 Weight, ready to operate kg 282 286 Length mm 1,282 1,282 Width mm 908 998 Height mm 1,237 1,237 1. Cleaning without leaving tracks Large side broom for perfect sweeping results, robust collision protection 2. Simple maintenance Pivot up the seat and all the areas for maintenance are open for access
Jonas 900 The vacuum-sweeper Jonas 900 is the next-in-size expert machine in the ride-on vacuum sweeper class. Its manoeuvrability, due to the directly coupled front wheel, means driving is easy even in narrow aisles. The modern, convenient cockpit enables fatigue-free operation. The large dimensioned, innovative cylindrical brush and high-performance suction turbine provide perfect sweeping results. High quality and robust construction ensure excellent cleaning results in indoor and outdoor areas. Area coverage up to 7,200 m 2 cleaned/hour Jonas 900 E Technical Data Jonas 900 V 900 E Sweeping width cm 70 70 With 1 side brush / 2 side brushes cm 95/120 95/120 Sweeping performance with 1 side brush m 2 / h 5,700 with 2 side brush m 2 /h 7,200 5,700 Dirt hopper volume l 60 60 Filter surface m 2 3.0 3.0 Power output kw 4.9 1.65 Sweeping speed km/h 6.0 6.0 Weight, ready to use kg 350 440 Width mm 1,000 1,000 Length mm 1,500 1,500 Height mm 1,330 1,330 1. The Take it easy system makes emptying child s play both hoppers can be conveniently removed and easily emptied, conveniently 2. Even the large cylindrical brush can be changed easily without the need for any tools Page 20 Ride-on sweepers and vacuum-sweepers
Jonas 980 Jonas 980 V The Jonas 980 vacuum-sweeper vehicles can be tailored to meet any needs: e. g. comfort seat, warning light, LPG drive, raised dumping, left-hand side brush, vacuum cleaner for the electric vehicles, cab safety roof and much more. We can assemble your machine to fit your individual needs. The large, innovative cylindrical brush together with the powerful suction turbine achieves perfect sweeping results while the Hako resonance shaking system enables long periods between cleaning and a filtration efficiency of over 99 %. Area coverage up to 7,200 m 2 cleaned/hour Page 21 Jonas 980 EH Ride-on sweepers and vacuum-sweepers Technical Data Jonas 980 V/LPG 980 E 980 VH 980 EH Sweeping width cm 70 70 70 70 With 1 / 2 side brushes cm 95/120 95/120 95/120 95/120 Sweeping performance with 1 brush with 2 side brushes m 2 /h 5,700 7,200 5,700 7,200 5,700 7,200 5,700 / 7,200 Dirt hopper volume l 60 60 75 75 Dump height cm 135 135 135 135 Filter surface m 2 3.0 3.0 3.0 3.0 Drive Petrol/LPG Battery Petrol/LPG Battery Power output kw 6.0 2.0 6.0 2.0 Sweeping speed km/h 6.0 6.0 6.0 6.0 Weight, ready to use kg 350 370 440 470 350 370 440 470 Width mm 1,000 1,000 1,000 1,000 Length mm 1,500 1,500 1,500 1,500 Height / with cab safety roof mm 1,330/2,000 1,330/2,000 1,330/2,000 1,330/2,000
Jonas 1200 Jonas 1200 E The Jonas 1200 is the perfect machine for the effective, economic vacuum sweeping of multi-storey car parks, warehouses production buildings and permanent outdoor facilities. The Jonas 1200 is available in either petrol/lpg, diesel or battery drive. The battery-powered models have an operating time of up to 5 hours and the petrol, diesel and liquified petroleum gas models up to 10 hours, meaning that they can be used to complete all types of indoor and outdoor work. Numerous options are available for selection depending on the working conditions, e. g. cab safety roof, second side brush (left) or flashing beacon. Jonas 1200 V Area coverage up to 13,200 m 2 cleaned/hour Page 22 Ride-on sweepers and vacuum-sweepers Technical Data Jonas 1200 V 1200 D 1200 E Sweeping width cm 80 80 80 With 1 / 2 side brushes cm 115/147 115/147 115/147 Sweeping performance, 1 side brush m 2 /h 10,300 10,300 9,200 Dirt hopper volume l 130 130 130 Dump height cm 142 142 142 Filter surface m 2 5.0 5.0 5.0 Max. power output kw/ps 11.9/16 9.8/13.4 4.3 Output at 2,550 rpm kw/ps 8.1/11.1 8/10.8 Sweeping speed km/h 9.0 9.0 8.0 Weight, ready to use kg 763 784 920 1.100 Width (fixed parts) mm 1,142 1,142 1,142 Length (fixed parts) mm 1,998 1,998 1,998 Height / with cab safety roof mm 1,520/1,999 1,520/1,999 1,520/1,999
Jonas 1500 Jonas 1500 V/D The Jonas 1500 fulfils all the necessary requirements for the long-term, economic and commercial use of vacuum sweeper vehicles, even under difficult working conditions. Powerful engines, diverse types of drive, a strong sweeping unit and high-performance filter system mean that the Jonas 1500 is a vehicle designed use anywhere and for practically any sweeping task. This is combined with a particularly simple operation and a comprehensive range of accessories for individual adaptation to your requirements! Area coverage up to 16,200 m 2 cleaned/hour Page 23 Jonas 1500 with optional comfort cab Ride-on sweepers and vacuum-sweepers Technical Data, Hako-Jonas 1500 V/LPG 1500 D 1500 E Sweeping width cm 92 92 92 With 1 / 2 side brushes cm 127/162 127/162 127/162 Sweeping performance, 1 side brush m 2 /h 12,960 12,960 10,400 Dirt hopper volume l 250 250 250 Dump height cm 152 152 152 Filter surface m 2 7.5 7.5 7.5 Power output kw 15.0 14.0 6.0 Sweeping speed km/h 10.0 10.0 8.0 Weight, ready to use kg 1,100 1,100 1,465 Width mm 1,335 1,335 1,335 Length mm 2,230 2,230 2,230 Height with cab safety roof mm 1,980 1,980 1,980 1. The dirt hopper can dump up to a height of 1.52 m 2. Single-button operation with the green Hakomatic button
Jonas 1900 Jonas 1900 with optional comfort cab If you are looking for the solution to large area coverage and use in extreme conditions: The Jonas 1900 vacuum-sweeper vehicles are high-performance vehicles conceived for precisely these tasks. They operate fully hydraulically in recreation and shopping centres, large warehouses, modern production facilities and car parks. They do so with an efficiency and working convenience unequalled in this class. For exaple gradients of up to 16 % can be overcome without any problems and while sweeping. The Jonas 1900 the most powerful Hako vacuum-sweeper vehicle of all time! Jonas 1900 Area coverage up to 25,000 m 2 cleaned/hour Page 24 Ride-on sweepers and vacuum-sweepers Technical Data Jonas 1900 LPG 1900 D Sweeping width cm 122 122 With 1 / 2 side brushes cm 156/193 156/193 Sweeping performance (theoretic) m 2 /h 25,000 25,000 Dirt hopper volume l 780 780 Dump height cm 162 162 Filter surface m 2 11.0 11.0 Power output kw 33.0 26.5 Sweeping speed km/h 13.0 13.0 Weight, ready to use kg 1,710 1,710 Width mm 1,520 1,520 Length mm 2,790 2,790 Height with cab safety roof mm 1,470 1,470 1. Continuous hydraulic height adjustment up to a dump height of 162 cm for emptying directly into a container 2. Easy access to all components simplifies regular maintenance
Cleaning Technology Municipal Technology Battery systems and accessories for sweepers and vacuum-sweepers Battery Hamster 500 Hamster 650/800 Jonas 800 Jonas 900 Jonas 980 Jonas 1200 Jonas 1500 Accessories Hamster 500 Hamster 650/800 Jonas 800 Jonas 900 Jonas 980 Jonas 1200 Jonas 1500 Jonas 1900 Wet batteries Cylindrical brush PP 24 V / 210 Ah, PzS low-maintenance Cylindrical brush PA (perlon/polyamide) 24 V / 420 Ah, PzS low-maintenance Cylindrical brush PES (polyester) 36 V / 325 Ah, PzS low-maintenance 36 V / 450 Ah, PzS low-maintenance Gel batteries 12 V / 10 Ah, GIV maintenance-free 12 V / 70 Ah, GIV maintenance-free 12 V / 105 Ah, GIV maintenance-free 6 V / 180 Ah, GIV maintenance-free 6 V / 240 Ah, GIV maintenance-free Page 25 Sweepers and vacuum-sweepers Cylindrical brush K 901 Cylindrical brush (steel/perlon) Left-hand side brush Second right-hand side brush Side brush vacuum Side brush speed regulation Liquified petroleum gas system (LPG) Puncture-proof tyres Comfort seat Cab safety roof Driver s cab Cab heating Flashing/Warning beacon Working lights Lighting system High-performance filter
Cleaning Technology Municipal Technology Scrubber-driers Hako-AquaControl system Fixed panel and flexible panel tanks Types of drive Scrubbing tools and accessories The future-oriented Hako-AquaControl system combines the two advantages cost-saving and environmental protection. A comprehensive series of tests completed by the TÜV have confirmed a saving of cleaning agent up to 50 % with improved cleaning results because the Hako-Aqua- Control system holds the cleaning solution longer between the floor surface and brush increasing the excellent cleaning performance even more. The Hako cleaning and care products comply with all the applicable directives. The use of aggressive cleaning agents can be dispensed with altogether thanks to the high mechanical performance of our floor cleaning machines. Scrubber-driers carry the water required for the cleaning task in a tank. In the case of a fixed panel tank, the recovery water and solution tanks are partitioned by a rigid panel. At the start of cleaning, only the clean water tank is filled. It is emptied during the course of the cleaning process and the recovery tank is filled with the waste water vacuumed up. In the case of a flexible panel tank, the recovery water and solution tank are partitioned by a highly resistant, flexible tank panel. When the machine is filled with solution, the tank panel bulges fully into the recovery water tank. The volume of the dirty water tank is proportionally less so that the flextank can carry up to 80 % more water to increase periods of operation effectively and economically. Hako offers various types of drive for the scrubber-driers. For cleaning indoors, the battery provides the cleanest and environmentally friendly type of drive. In the case of very large areas and multi-shift operation, liquified petroleum gas (LPG) drive is an interesting alternative because the low emissions produced also enable working in indoor areas. Hako can provide the right solution for all cleaning and maintenance work. Whether using powerful, rotating scrubbing brushes in disk or cylindrical brush form, pads or silicone carbide bristles, surfactant-free cleaning agents, basic cleaner or care products: Hako can provide you with an effective, economic cleaning performance! Products Walk-behind scrubber-driers Pages 28-37 Ride-on scrubber-driers Pages 38-43 Battery systems and accessories Pages 44-45 Page 26 Scrubber-driers
Scrubber-driers Economic cleaning of buildings from 1,400 to 12,200 m 2 cleaned/hour Hako offers a wide range of scrubber-driers for the wet cleaning of hard floors. Innovative systems increase the efficiency and scope of your operations: Use Hako-AquaStop to save water and increase operating times. Hako-AquaForce renders cleaning agents superfluous. DaytimeCleaning guarantees long periods of operation. And Hako-AntiBac increases machine hygiene for use in sensitive areas by arresting the development of bacteria and fungi! Hakomatic E10, B10 Hakomatic B12 Hakomatic E430 Hakomatic B30 Hakomatic B45 Hakomatic B70 Hakomatic B90, B120 Hakomatic B100 R Hakomatic B115 R Hakomatic B910 Hakomatic B310 R Hakomatic B310 R CL Hakomatic 1800 to 1,400 m 2 /h to 1,500 m 2 /h to 1,700 m 2 /h to 1,900 m 2 /h to 2,900 m 2 /h to 4,200 m 2 /h to 4,200 m 2 /h to 4,200 m 2 /h to 5,800 m 2 /h to 5,300 m 2 /h to 9,250 m 2 /h to 8,600 m 2 /h to 12,200 m 2 /h Walk-behind scrubber-driers Ride-on scrubber-driers Page 27 Scrubber-driers
Hakomatic E10 / B10 Hakomatic E10 Hakomatic B10 Area coverage up to 1,400 m 2 cleaned/hour Page 28 Walk-behind scrubber-driers The Hakomatic E10 and B10 are compact, robust and easily manageable scrubber-driers for use on smaller areas. The projecting cylindrical brush head enables cleaning close to borders, thus saving any intensive follow-up work. The double rollers ensure the optimum cleaning of structured floors and joints while the folding handlebar and battery system, which can be removed without the need for tools using the user-friendly, quick-change system and is mounted on rollers, guarantee the machine can be transported easily and conveniently for use in several locations. It has a net operating time of 30 minutes per battery system (B10). Optionally also available with a mains power supply (E10). Technical Data Hakomatic E10 B10 Working width cm 35 35 Squeegee width cm 45 45 Theoretical area coverage m 2 /h 1,400 1,400 Drive Mains power Battery Nominal voltage V/Hz 230 AC/50 Hz 24 V/25 Ah No. of brushes pieces 2 2 Working speed km/h 4.0 4.0 Solution tank l 10 10 Recovery tank l 11 11 Weight without battery kg 44 40 Weight, wet with battery kg 54 85 Total output kw 1.45 0.92 1. Battery quick-change system, no need for tools and user friendly 2. Two brush rollers for a high scrubbing performance and two squeegees for forward and reverse operation
Hakomatic B12 The Hakomatic B12 is a convenient, compact and easily transportable scrubber-drier for cleaning smaller areas. The projecting disk brush head enables cleaning close to borders, thus saving any intensive follow-up work. The disk brush ensures smooth, hard floors are cleaned thoroughly. Its light weight and folding operating lever ensure space-saving storage and easy transport. The compact design provides a high level of manoeuvrability and excellent visibility in confined and congested areas. The integrated charger enables the battery to be recharged using any conventional power socket. Area coverage up to 1,500 m 2 cleaned/hour Page 29 Walk-behind scrubber-driers Hakomatic B12 Technical Data Hakomatic B12 Working width cm 38 Squeegee width cm 47 Theoretical area coverage m 2 /h 1,500 Nominal voltage/capacity V/Ah 24/25 No. of brushes pieces 1 Working speed km/h 4.0 Solution tank l 16 Recovery tank l 22 Width cm 47 Weight without battery kg 40 Weight, wet with battery kg 80 Total output kw 0.54 1. The Hakomatic B12 can even be fitted in a boot for transport between different buildings 2. Easily understandable symbols enable intuitive operation
Hakomatic E430 The Hakomatic E430 is a convenient, mains-powered scrubber-drier for the fast, economic routine cleaning of hard floors. With its compact construction, this machine provides good handling, a high degree of manoeuvrability and good visibility. The height adjustable operating lever and adjustable brush drive (PowerFlow) are ideal for fatigue-free operation. Area coverage up to 1,700 m 2 cleaned/hour Page 30 Walk-behind scrubber-driers Hakomatic E430 Technical Data Hakomatic E430 Working width cm 43 Squeegee width cm 75 Theoretical area coverage m 2 /h 1,700 Nominal voltage V/Hz 230 AC/50 No. of brushes 1 Working speed km/h 4.0 Solution tank l 22 Recovery tank l 22 Width, without/with squeegee cm 45/75 Weight without battery kg 76 Weight, wet with battery kg 98 Total output kw 1.8 1. All operating elements are within direct view and easy reach 2. The parabolic, floating squeegee enables working close to borders
Hakomatic B30 The Hakomatic B30 scrubber-drier is ideally equipped for the fast, thorough cleaning of small and medium-sized areas. Manoeuvrable and compact, they provide an excellent view of the area to be cleaned. Two models are available for selection: either with PowerFlow (B30, the brush supports the forward drive) or for convenience with a continuously variable drive (B30 CL, forwards/ reverse). A maintenance-free battery packet guarantees long operating times of up to 110 minutes and the series production on-board charger enables the battery to be charged at any standard power socket. Area coverage up to 1,900 m 2 cleaned/hour Page 31 Walk-behind scrubber-driers Hakomatic B30 Technical Data Hakomatic B30 B30 CL Working width cm 43 43 Squeegee width cm 76 76 Theoretical area coverage m 2 /h 1,700 1,900 Nominal voltage V 24 24 No. of brushes 1 1 Working speed km/h 4.0 4.5 Solution tank l 30 30 Recovery tank l 30 30 Width, without/with squeegee cm 50/76 50/76 Weight without battery kg 85 96 Weight, wet with battery kg 179 190 Total output kw 1.13 1.31 1. Ideal ergonomics, fatigue-free working thanks to the optimum handle position and excellent view as well as intuitive operation meaning short training 2. Colour-coded service points and direct, tool-free access for daily inspection and easy to service construction reduce servicing time and costs
Hakomatic B45 Hakomatic B45 CL TB 65 Hakomatic B45 CL WB The Hakomatic B45 scrubber-driers are highly convincing new developments for basic and routine cleaning of all non-textile floors. Whether equipped with economic PowerFlow (the brush supports the forward drive) or convenient, continuously variable drive (forward/reverse): The models in the Hakomatic B45 series are provided with tailor-made solutions, quickly and economically, according to the customers demands. Depending on your individual needs, you can select from a circular brush unit with working widths of 43, 51 and 65 cm or a cylindrical brush unit with a working width of 50 cm and dirt collection. Area coverage up to 2,900 m 2 cleaned/hour Page 32 Walk-behind scrubber-driers Hakomatic B45 Technical Data Hakomatic B45 B45 CL TB B45 CL WB Working width cm 43/51 43/51/65 50 Squeegee width cm 76/86 76/86/95 86 Theoretical area coverage m 2 /h 1,700/2,000 1,900/2,300/2,900 2,200 Drive PowerFlow Drive Drive Nominal voltage V 24 24 24 No. of brushes 1 disk 1/1/2 disk(s) 2 cylindrical Working speed km/h 4.0 4.5 4.5 Solution tank l 42 42 42 Recovery tank l 42 42 42 Width, without/with squeegee cm 50/76 / 56/86 50/76 / 56/86 / 67/95 60/86 Weight without battery kg 99/101 106/108/118 108 Weight, wet with battery kg 221/223 228/230/237 230 Total output kw 1.13 1.31 1.31
Hakomatic B45 CLH Areas in which hygiene is a sensitive factor, such as clinics and retirement homes but also supermarkets and the food industry, set the highest demands on thorough cleaning. The Hako-AntiBac option, which restricts fungal and bacterial growth in the recovery tank of the Hakomatic B45 CLH, enables you to fulfil these demands with ease for more hygienic tanks, optimum user protection and reduced operating costs! Technical Data Hakomatic B45 CLH Working width cm 51 Squeegee width cm 86 Theoretical area coverage m2/h Nominal voltage V No. of brushes Hakomatic B45 CLH Working speed Solution tank Recovery tank Hako-AntiBac for perfectly hygienic cleanliness in clinics Width, without/with squeegee option Wa l k- b e h i n d s c r u b b e r- d r i e r s 24 1 km/h l 4.5 42 l cm 42 56/86 Weight without battery kg 108 Weight, wet with battery kg 230 Total output Page 33 2,300 kw 1.31 Innovations for the highest levels of cleanliness: Hako-AntiBac : considerable reduction of bacterial and fungal growth in the recovery tank
Hako-DaytimeCleaning Hakomatic B70 CL DTC Hakomatic B45 CL DTC Quick charging for long operating times: Hako-DaytimeCleaning Page 34 Walk-behind scrubber-driers The Hakomatic B45 CL and Hakomatic B70 CL with Hako-DaytimeCleaning (DTC) are ideal for the economic and flexible cleaning of small and large areas on which, in addition to routine cleaning, intermediate cleaning by a cleaning machine is required several times a day. The quick charge technology implemented by Hako-DaytimeCleaning consists of a special quick-charge battery and a matching charger. Despite a lower capacity, it enables a longer operating time and intermediate charging at any standard 230 V power socket. The machine is recharged after just 30 minutes for longer operating times and optimum machine utilisation with almost permanent availability! Technical Data Hakomatic B45 CL DTC B70 CL DTC Working width cm 51 65 Squeegee width cm 86 95 Theoretical area coverage m 2 /h 2,300 3,200 Nominal voltage V 24 24 No. of brushes 1 disk 2 disk Working speed km/h 4.5 5.0 Solution tank l 42 72 Recovery tank l 42 74 Width, without/with squeegee cm 56/86 59/95 Weight without battery kg 107 190 Weight, wet with battery kg 204 338 Total output kw 1.31 2.28 Innovations for the highest levels of cleanliness Hako DaytimeCleaning: Quick charge technology for flexible deployment through constant availability Quick charging at any 230 V power socket Ready for use again after just 30 minutes
Hako-AntiBac Hakomatic B70 CL Hakomatic B90 CL Page 35 Walk-behind scrubber-driers Hakomatic B45 CLH The antibacterial tank coating, Hako-AntiBac, improves the hygienic condition of the tanks considerably and reduces the development of odours as well as reducing the amount and cost of disinfectants used for cleaning the tanks. Tested in accordance with JIS Z 2801 (ISO 22196), laboratory tests showed a reduction of 99.9 % in respect of bacterial strains and fungi. Standard measure for: Hakomatic B45 CLH Hakomatic B70 CL Hakomatic B90 und B90 CL Technical Data Hakomatic B45 CLH B70 CL B90/B90 CL Working width cm 51 60 85 60 85 Squeegee width cm 86 95 110 95 110 Theoretical area coverage m 2 /h 2,300 3,000 4,200 3,000 4,200 Nominal voltage V 24 24 24 No. of brushes 1 2 2 Working speed km/h 4.5 5.0 5,0 Solution tank l 42 72 85 Recovery tank l 42 74 85 Width without/with squeegee opt. cm 56/86 58/95 110 58/95 110 Weight without battery kg 108 182 195 213 Weight, wet with battery kg 230 380 393 415 480 Total output kw 1.31 2.28 2.3 2.6
Hakomatic B70 Hakomatic B70 CL WB Hakomatic B70 CL TB The optimal machines for the economic wet cleaning of medium and largesized hard floor indoor areas. Excellent view, incredible manoeuvrability, simple operation. Optimum vacuuming up of the cleaning solution even on difficult floors thanks to the innovative squeegee geometry. Available with either disk brushes for smooth floors or cylindrical brushes with integrated course dirt collection for use on structured floors. In addition, the solution and recovery tanks of the Hakomatic B70 are provided with the Hako-AntiBac feature which considerably reduces bacterial and fungal growth in the tanks. Technical Data Hakomatic B70 60 cm 95 95 95/110/110 3,000 3,200 4,200 24 24 24 2 disk 2 cylindrical 2 disk m2/h 3,200 V No. of brushes Working speed Solution tank Recovery tank Page 36 Wa l k- b e h i n d s c r u b b e r- d r i e r s 65/75/85 cm 65 Squeegee width Nominal voltage Area coverage up to 4,200 m 2 cleaned/hour B70 CL TB Working width Theoretical area coverage Hakomatic B70 B70 CL WB km/h 5.0 l l 5.0 5.0 72 72 72 74 74 74 Width, without/with squeegee cm 58/95 58/95 58/95 110 Weight without battery kg 175 182 190 195 Weight, wet with battery kg 325 380 388/391/393 Total output kw 2.26 2.28 2.28
Hakomatic B90 / B120 Hakomatic B90 CL WB Hakomatic B120 The Hakomatic B90 and B120 are precisely the right machines for fast, thorough routine cleaning. Equipped with either a cylindrical brush or disk brush unit, a working width of 60 to 85 cm, an operating time of up to 4 hours and numerous options leave no customer demands to be desired. Excellent view, high degree of manoeuvrability, easy operation (green Hakomatic button with the CL model) and optimum vacuuming up of the cleaning solution distinguish its simple but reliable advantages. In addition, the solution and recovery tanks of the Hakomatic B90 are provided with the Hako-AntiBac feature which considerably reduces bacterial and fungal growth in the tanks. Area coverage up to 4,200 m 2 cleaned/hour Page 37 Walk-behind scrubber-driers Hakomatic B120 Technical Data Hakomatic B90 CL TB B90 CL WB B120 Working width cm 65/75/85 60/70 85 Squeegee width cm 95/110/110 95/110 110 Theoretical area coverage m 2 /h 3,200/3,700/4,200 3,000/3,500 4,200 Nominal voltage V 24 24 24 No. of brushes 2 disk 2 cylindrical 2 disk Working speed km/h 5.0 5.0 5.0 Solution tank l 85 85 110 Recovery tank l 85 85 115 Width, without/with squeegee cm 58/95, 58/95, 58/110 58/95, 58/110 70/110 Weight without battery kg 213 213 246 Weight, wet with battery kg 415 480 415 480 510 Total output kw 2.3/2.3/2.6 2.3/2.6 2.8
Hakomatic B100 R Slim, manoeuvrable and compact - the main features of the Hakomatic B100 R which offers the right solution for every problem. It provides a successful combination of compact design and rational working width. The ergonomic cockpit, with comfortable seat ensures operators remain concentrated and fatigue-free. These slimline vehicles can also cope with narrow passages. Hakomatic B100 R TB Area coverage up to 4,200 m 2 cleaned/hour Page 38 Ride-on scrubber-driers Technical Data Hakomatic B100 R TB Working width cm 65 Squeegee width cm 86 Theoretical area coverage m 2 /h 4,200 Nominal voltage V 36 No. of brushes 2 disk Working speed km/h 6.5 Solution tank l 102 Recovery tank l 102 Width, without/with squeegee cm 73/85 Weight without battery kg 280 Weight, wet with battery kg 580 Total output kw 2.23 1. Thorough working close to borders 2. Minimum turning circle
Hakomatic B115 R Hakomatic B115 R WB 700 Area coverage up to 5,800 m 2 cleaned/hour Page 39 Ride-on scrubber-driers Hakomatic B115 R TB 750 (with special equipment) Scrubbing and drying while comfortably seated: The Hakomatic B115 R ride-on scrubber-drier models with disk or cylindrical brushes for the economic cleaning of hard floors are the clever alternative to hand-operated scrubber-driers. These vehicles are distinguished by their large area coverage in the hard, industrial environment. The ergonomically designed cockpit provides an optimum view of the area being cleaned and working equipment. They are even more manoeuvrable than hand-operated machines: The intelligent construction with rear turning and special squeegee kinematics enables a turning circle of just 170 cm (65 to 75 cm) and 175 cm (85 to 90 cm)! Technical Data Hakomatic B115 R TB 650 WB 700 TB 750 WB 850 TB 900 Working width cm 65 70 75 85 90 Squeegee width cm 86 95 95 110 110 Theoretical area coverage m 2 /h 4,200 4,500 4,800 5,500 5,800 Nominal voltage V 24 24 24 24 24 Power consumption, hydraulic motor W 800 800 800 800 800 Power consumption, suction motor W 550 550 550 550 550 No. / Type of brushes 2 x disk 2 x cyl. 2 x disk 2 x cyl. 2 x disk Brush speed rpm 210 850 210 850 210 Solution/recovery tank l 116/116 116/116 116/116 116/116 116/116 Width, without/with squeegee cm 80/86 80/95 80/95 95/110 95/110 Total weight, ready to operate kg 706 716 716 727 727
Hakomatic B910 Hakomatic B910 with optional pree-sweeper Area coverage up to 5,300 m 2 cleaned/hour Page 40 Ride-on scrubber-drier Hakomatic B910 The Hakomatic B 910 performs powerful basic and routine cleaning. The brush pressure can be adjusted to up to 60 kg using a foot pedal. You can use the brush attachment option to sweep up loose dirt in the dry area in front of the scrubbing brushes. The fact that you can dispense with an additional sweeping machine means cost-savings of up to 40 %. The Hako Control System enables us to programme the machine according to your individual needs. A connection socket for hand-held scrubbing and vacuuming tools enables corners and awkward areas to be cleaned thoroughly while the central arrangement of the driver s seat provides a perfect view of the working area. Technical Data Hakomatic B910 Working width cm 88 Squeegee width cm 110/95 * Theoretical area coverage m 2 /h 5,300 Nominal voltage V 24 No. of brushes 2 Working speed km/h 6.0 Solution tank flextank l 140 Recovery tank flextank l 140 Width, without/with squeegee cm 93/110 (95 * ) Weight without battery kg 365 Weight, wet with battery kg 760 Total output kw 3.0 1. Easily accessible battery system with quick-change device (option) 2. Works well close to borders thanks to the brushes projecting on both sides and freefloating squeegee. * Option
Hakomatic B310 R Hakomatic B310 R WB 960 Area coverage up to 9,250 m 2 cleaned/hour Page 41 Ride-on scrubber-drier Hakomatic B310 R TB 1230 Intensive scrubbing and thorough vacuuming in one operation while comfortably seated. Fitted with disk brushes or cylindrical brushes (with dirt collection) depending on the use. Whether in shopping centres, multi-storey car parks, logistics or industrial areas: The zero-emission battery drive enables clean, environmentally friendly operation. Optimum cleanliness even in border areas thanks to the side scrubbing unit (option with disk brushes), simultaneously increase of the working width. Two side brushes enable sweeping up of coarse and fine dirt over the entire width of the squeegee (option with cylindrical brush). Extremely long operating time with just one battery charge. Superior technology and driving comfort of high standard: Hakomatic B310 R. B310 R Technical Data Hakomatic TB 1020 TB 1230 No. of brushes pieces 2 3 2 Working width (with optional 102 (118) 123 96 side scrubbing unit) cm B310 R WB 960 Squeegee width cm 126 126 126 Theoretical area coverage m 2 /h 7,600 9,250 7,200 Nominal voltage V 36 36 36 Working speed km/h 7.50 7.50 7.50 Solution flextank l 310 310 310 Recovery flextank l 310 310 310 Width, without/with squeegee cm 113/126 133/126 113/126 Weight without battery kg 710 770 713 Weight, wet with battery kg 1,445 1,624 1,567 Total output kw 4.09 4.80 4.37 1. Ergonomic cockpit with good all-round visibility 2. Simple, tool-free change of disk brushes
Hakomatic B310 R CL Hakomatic B310 R CL TB 1230 with optional cab safety roof More equipment and efficiency. The tailor-made machine concept represented by the Hakomatic B310 R CL provides two systems in one vehicle: 1. A compact high-performance scrubber drier for wet scrubbing and vacuuming dry in one working process 2. Combination vehicle with addition sweeping system with dust vacuuming. In addition, you can select further options, such as a side scrubbing unit, cab safety roof with flashing beacon, working lights, dirty water treatment, cleaning agent dosing system and lots more. Area coverage up to 8,600 m 2 cleaned/hour Page 42 Ride-on scrubber-drier Hakomatic B310 R CL TB 1020 with optional cab safety roof Technical Data Hakomatic B310 R CL TB 1020 B310 R CL TB 1230 Working width cm 102 123 Squeegee width cm 126 126 Theoretical area coverage m 2 /h 7,100 8,600 Nominal voltage V 36 36 No. of brushes 2 3 Working speed km/h 7,0 7,0 Solution tank flextank l 310 310 Recovery tank flextank l 310 310 Width, without/with squeegee cm 120/126 133/126 Weight without battery kg 707 935 Weight, wet with battery kg 1,787 1,944 Total output kw 5,9 7,6 1. The dirt hopper can be emptied in just one simple operation 2. Reduced service and maintenance costs through direct access to all important parts and systems
Hakomatic 1800 The powerful, fully hydraulic combined vehicle for the economic dry and wet cleaning of large areas. High cleaning performance and long periods of operation, even in multi-shift operation, thanks to the powerful drives, large tanks and big dirt hoppers with hydraulic high dump facility. The entire drive unit can be pivoted out to the side for service work without the need for tools. Area coverage up to 12,200 m 2 cleaned/hour Hakomatic 1800 D/LPG with optional cab safety roof Technical Data Hakomatic 1800 D/LPG Wet cleaning unit Working width cm 122 Squeegee width cm 135 Theoretical area coverage m 2 /h 12,200 Solution tank l 380 Recovery tank l 400 No. of brushes 3 Brush speed rpm 200 Sweeping unit Sweeping width cm 195 Main brush Ø cm 35 x 105 Theoretical area coverage m 2 /h 19,500 Dirt hopper l 240 Dump height/hopper l Continuously variable Raised emptying cm To 155 Dimensions Length cm 270 Width cm 160 Height cm 150 Drive types: Diesel (1800 D): Kubota 4-cylinder, producing 25 kw LPG (1800 LPG): GM 4-cylinder, producing 32 kw Page 43 Ride-on scrubber-drier
Cleaning Technology Municipal Technology Battery systems and accessories for scrubber-driers As a specialist for the thorough, economic cleaning of buildings, in addition to first class machines, Hako also offers a wide range of accessories with which to adapt your machines individually according to your requirements from high-performance battery systems to special brushes and other practical accessories which make work even lighter! Battery systems 1 for CL 2 for CLH 3 for DTC Hakomatic B10 B12 B30 B45 B45 DTC B70 CL B70 DTC B90 B120 B100 R B115 R B 910 B310 R B310 R CL Low-maintenance wet batteries 24 V / 240 Ah, PzS 24 V / 320 Ah, PzS 36 V / 480 Ah, PzS 36 V / 640 Ah, PzS Maintenance-free batteries 12 V / 25 Ah, gel 12 V / 55 Ah, AGM (DaytimeCleaning) 3 12 V/ 80 Ah, AGM 12 V / 75 Ah, AGM (DaytimeCleaning) 3 12 V / 105 Ah, gel 6 V / 160 Ah, gel 6 V / 180 Ah, gel 1 12 V / 198 Ah, AGM 6 V / 240 Ah, gel 24 V / 280 Ah, PzV 36 V / 560 Ah, PzV Page 44 Scrubber-driers = Standard = Option
Accessories Hakomatic E/B10 B12 B30 B30 CL B45 / CL/CLH B70 / B70 CL B90 / B90 CL 1 for CL 2 for CLH B120 B100 R B115 R B910 B310 R B310 R CL 1800 Cylindrical brushes PA Cylindrical brushes PP Cylindrical brushes SIC K 120 Cylindrical brushes SIC K 500 Cylindrical brushes SIC K 180 Disk brush PPN 0.5 Disk brush PPN 0.8 Disk brush, 5-component Disk brush K 901 Disk brush SIC K 600 Disk brush SIC K 240 Disk brush SIC K 180 Disk brush SIC K 120 Disk brush SIC K 80 Disk brush SIC K 46 Super-Pad, red Super-Pad, green Super-Pad, brown Super-Pad, black Microfibre pad Puncture-proof tyres 1, 2 On-board dosing system Automatic filling system Cleaning solution, can be dosed Hand-held suction hose Hand tool, incl. spray and scrubbing tool 1 1, 2 1, 2 Working lights Sound insulation kit/silent kit 1 1, 2 1, 2 1, 2 Clinic model 2 2 2 Mop holder/tool storage / / / / / / -/ -/ -/ Flashing beacon/flashing light -/ /- /- /- Cab safety roof Sweeping unit Page 45 Scrubber-driers = Standard = Option
Hako-AquaForce Complete routine cleaning without the need for chemicals Hako-AquaForce means cleaning using demineralised water. This technology has been used successfully in numerous areas, e. g. for cleaning glass and facades and in car washes. Hako-AquaForce achieves excellent results through the mechanical aspect of cleaning floors without the need of expensive cleaning agents because demineralised water is particularly soft and loosens particles of dirt very well. In addition, it dries without leaving any residues, streaks or limescale marks. This also reduces any resoiling because particles of dirt no longer find any adhesion opportunities. Simple and uncomplicated Hako-AquaForce pays dividends NaCI The Hako-AquaForce unit consists of an ion exchange unit with cartridges which is connected to the filling unit on the water tap. The tap water flows through the cartridges filled with special resins, whereby all the minerals (organic salts, lime etc.) are removed. The filling time itself is not lengthened by this process. When the resins have become saturated after a certain time, they can be recycled by means of a non-polluting procedure a practically unrestricted number of times. The service life of the resins depends on the respective level of hardness of the water, whereby the size of the cartridge can be individually adapted to your needs. This means that, for example, a mixed bed resin unit of 45 kg suffices for a flow rate of up to 6,200 litres with a water hardness of 10 ºd GSG! Hako-AquaForce ensures excellent results of cleaning. Time-consuming follow-up work is unnecessary and, as a result of the reduced resoiling, occasional cleaning routines can be dispensed with completely. Furthermore, Hako-AquaForce not only saves costs in respect of cleaning agents: Dispensing with purchase, warehouse logistics and transport costs represents extra savings! H + H + H + H + H + Na + Cation exchange resin H + H + H + H + H + Na + Anion exchange resin H 2 O Page 46 Scrubber-driers
Cleaning Technology Municipaltechnology Automatic dosing and filling systems for scrubber-driers Automatic dosage Automatic filling Onboard dosing system FastFill The automatic, wall-mounted dosing system works according to the Venturi principle: On opening the water tap, the water is added to the cleaning agent at low pressure via a separate hose. The quantity is defined by means of a measuring pin. The system is equipped with non-return valve, complying with DVGW (German Technical and Scientific Association for Gas and Water) so that contaminated water cannot flow back into the water supply. To enable automatic filling, the hose is fixed to the scrubbing-vacuuming vendor by means of a plug-in coupling. When the clean water tank is completely filled, a float switch stops the water supply. The operator can complete other work during this time and need not remain by the machine this supports a more efficient, economic deployment of personnel. The system consists of a regulated pump. The addition of the cleaning agent occurs subject to the water supply. The concentration can be adjusted continuously and always remains constant. Over and underdosing are effectively prevented as a result, even when the operator the increases or reduces the water supply. The system can also be used in machines without a water pump. The FastFill filling system is particularly suited for use involving high water consumption or little time for the filling process. It consists of a 150 or 300 litre tank and is easy to handle. The fast filling occurs at 120 litres/minute. A dosing unit ensures an accurate mixture ratio of cleaning agent suitable for the dispenser. Page 47 Scrubber-driers
Hako-Chemical on Demand Innovations for the highest levels of cleanliness We are constantly striving to improve our products even more. To ease your workloads. To reduce your operating costs. To protect the environment. An example of this is Chemical on Demand. Optimum efficiency and cleanliness at the touch of a button Cleaning agents are only deployed when necessary by pressing the button. This means that areas which are not particularly dirty can be cleaned without the use of any chemicals. Less cleaning agents more efficiency, thanks to Hako-Chemical on Demand: Demand-actuated use of cleaning agents Areas with less dirt can be cleaned without chemicals and thus more economically In areas with stubborn dirt, cleaning agents are added at the press of a button Precise, economic dosing Page 48 Scrubber-driers
Cleaning Technology Municipal Technology Cleaning agents, polymer dispersions and care products for cleaning building interiors Ideal for scrubbing/vacuuming Hako cleaning agents are non-foaming and, as a result, particularly suited for use in Hako floor cleaning machines. Hako offers a comprehensive selection for the fast, thorough cleaning of different types of dirt. The concentrated solutions of our cleaners are also very economical. The HACCP certificate of free sale is available for many Hako cleaning products. Polymer dispersions and care products for Hako polishing machines Cleaning agents for Hako floor cleaning machines Polyfit 1 Metal cross-linked polymer wax on an acrylic polymer basis for all hard floors insensitive to water forms a hard-wearing, elastic, polished protective finish. Cleanol 1,2 Floor cleaner for all daily cleaning, ph-value 7.5 8.5 undiluted concentrate Cleanol-HD 1,2 Industrial cleaner, removes all dirt including wax and emulsion coats ph-value 13-14 undiluted Durablack 1 Black, metal cross-linked polymer wax for the permanent sealing of porous and worn floors Duracryl 1 Metal cross-linked polymer wax to fill pores in porous floors Gelwax 1 Care and routine cleaning agent for the daily cleaning of floors treated with polymer wax Finish 1 Care and routine cleaning agent for the daily cleaning of floors treated with polymer wax Available in: 1 10-litre canister or 2 200-litre drum Cleanol-SE ECO Highly concentrated for daily cleaning, 2-litre canister, specially suited for use with the on-board dosing system Defoam 1 Foam suppressants on a silicone basis, suitable for all cleaning agents which otherwise foam too much, ph-value 6.5 7.5 Binol 1,2 Floor cleaner for all daily cleaning, very reasonably priced, ph-value 7.5 8.5 undiluted concentrate Polyclean 1,2 Combined cleaning and care product for daily cleaning, ph-value 6.5 7.5 undiluted Cleanol-S 1,2 Basic cleaner, removes encrusted dirt, oil and grease residues, ph-value 13 14, undiluted Cleanol-I 1,2 Removes oil and grease, ph-value 7.5 8.5 undiluted Cleanol-R 1,2 (manual application) Removes rubber abrasion from industrial floors, ph-value 11.5 12.5 Cleanol-K 1,2 Surfactant-free cleaner for microporous surfaces, particularly well suited for stoneware tiles ph-value 10-11, undiluted Cleanol-Sport 1,2 Routine cleaner for sports hall flooring, ph-value 7.5 8.5 undiluted, complies with DIN 18032 Cleanol-Food 1,2 Floor cleaner for the foodstuffs industry, ph-value 13.5 14, undiluted Cleanol Smell-X: Microbiological odour eliminator For all scrubber-driers Every tank, unless equipped with Hako- AntiBac, provides ideal conditions for bacteria growth, leading to unpleasant, foul-smelling odours. No matter how often you clean the tank, the smell remains. Cleanol Smell-X is based on organic, renewable raw materials. It contains beneficial microorganisms, which destroy bacteria hotbeds and prevent further bacteria growth. The result: Fast odour neutralization with sustainable effect. Page 49 Scrubber-driers
Single-disc and polishing machines Hako quality is reflected in the results To achieve perfect results, Hako provides a range of single-disc and polishing machines, in carefully staged sizes and performance levels, which are optimally adapted to each other to clean and care for hard floors quickly and economically as well as a comprehensive range of care products and accessories. Super 43/180, 43/450 43/2-speed Super 53/1100 Speedpolisher B51 Page 50 Single-disc and polishing machines
Super 43 Super 43/2-speed Super 43/180: The standard machine for basic and routine cleaning of all hard floor surfaces or shampooing carpeted areas. Super 43/450: High-speed machine for cleaning soft floor surfaces and providing a shiny, polished finish. Super 43/2-speed: Universal single-disc machine for economic scrubbing and polishing with two speeds. Super 43/180 Technical Data Super 43/180 43/450 43/2-speed Nominal voltage V/Hz 230/50 230/50 230/50 Max. total output W 1,200 1,500 1,200 1,500 Speed rpm 180 450 190/380 Working width cm 43 43 43 Weight kg 35 39 35.5 Cable lengths m 12 12 12 Ground clearance housing/engine mm 125/330 125/330 125/330 1. The continuously variable handlebar or shaft adjustment ensures an optimal working height 2. Large selection of brushes, pads and drive plates for all deployment possibilities Page 51 Single-disc and polishing machines
Super 53 High-speed machine for polishing, cleaning and spraying. Higher productivity through PowerFlow. A typical use is the polishing of soft floor surfaces. Useful accessories for the Super 53 include various polishing brushes and pads, drive plates, suction unit and vacuuming ring. Super 53/1100 Technical Data Super 53/1100 Nominal voltage V/Hz 230/50 Max. total output without/with suction unit W 1,320/1,000 Speed rpm 1,100 Working width cm 53 Weight kg 46 Cable lengths m 20 Ground clearance housing/engine mm 130/320 1. Pad holder with centerlock for changing the polishing pads fast, without any tools 2. The flat, projecting brush head even enables access under radiators Page 52 Single-disc and polishing machines
Speedpolisher B51 High polishing performance, extreme manoeuvrability, dust vacuuming and simple operation are just a few of the advantages of the Speedpolisher B51. It provides gleaming results on coated floor surfaces and has an area coverage of up to 1,600 m 2 /hour, e. g. in schools, warehouses, offices and clinics. Area coverage up to 1,600 m 2 cleaned/hour Speedpolisher B51 Technical Data Speedpolisher B51 Working width cm 51 Max. working speed km/h 3.2 Nominal voltage V 36 Speed rpm 2,000 Work tools Pad Pad pressure kg 8 15 Power consumption, pad motor W 1,850 Length, serviceable cm 154 Width (with work tool) cm 56 Height, serviceable cm 109 Weight, with/without batteries kg 110/230 1. All operating elements can be accessed directly, incl. the pressing force adjuster; the adjustable handlebar ensures fatigue-free working 2. The polish dust is colleted in the replaceable filter bag; the exhaust air is filtered 3. No tools required for easy pad change, various pads available for different applications Page 53 Single-disc and polishing machines
Wet and dry vacuum systems Brush vacuums, dry and wet vacuums, industrial vacuums In many cases, a vacuuming cleaning method remains the best solution. We can supply various wet and dry vacuum systems perfectly suited to your individual needs ranging from brush vacuums for the thorough cleaning of carpets, dry and wet vacuums on to powerful industrial vacuums! Carpovac Supervac D5 Supervac L1-15, L1-30 Supervac L2-70, L3-70 l Carpomatic 34 Brush vacuums Vacuum cleaners Dry and wet vacuums Industrial vacuums Carpet cleaning machine Page 54 Wet and dry vacuum systems
Carpovac Brushing and vacuuming in one working procedure for a deep, thorough and gentle cleaning of carpets. The Hako-Carpovac brushes the pile thoroughly, whereby it also removes dirt which clings to the fibres and ensures an optimum cleaning result even in areas subject to heavy wear. The telescopic suction pipe and flexible suction hose can be used to vacuum curtains, furnishings etc. without any problems. The series production models are fitted with germreducing fibro filters or optionally with Hepa filters to enable use in hygienically sensitive areas. To clean carpets thoroughly Carpovac Technical Data Carpovac Deployment possibilities Dry Nominal voltage V/Hz 230/50 Nominal power W 900 Vacuum mbar 196 Air flow rate (l/sec) 49 Sound pressure level db(a) 68 Gross dust container volume l 4 Weight without accessories kg 7.8 Cable lengths m 10.0 Suction hose length m 1.5 Nominal size, accessories mm 36 1. Change brushes on the electric brush without any tools 2. Also, access to the suction channel for maintenance work without any tools Page 55 Wet and dry vacuum systems
Supervac D5 Compact vacuum cleaner for commercial use in offices, hotels etc. As a result of the low noise development and Hepa filter (option), it is also perfectly suited for use in hospitals and noise-sensitive areas. Extremely manoeuvrable, stable and lightweight. For commercial use in offices and hotels Page 56 Wet and dry vacuum systems Supervac D5 Technical Data Supervac D5 Deployment possibilities Dry Nominal voltage V/Hz 230/50 Nominal power W 1,300 Vacuum mbar 281 Air flow rate l/sec 58 Sound pressure level db(a) 62 Dust bag volume l 5 Gross dust container volume l 12.5 Weight without accessories kg 8 Cable lengths m 12 Suction hose length m 2 Nominal size, accessories mm 36 1. Space-saving storage thanks to the vertical parking position and holder for the suction pipe.
Supervac L1-15 / L1-30 / L2-70 / L3-70 I Supervac L1-15 / L1-30 Very handy and operator-friendly wet and dry vacuum cleaners. Particularly stable against tipping over due to the low, compact design. Four wheel chassis with swivel castors (L1-15, L1-30) or robust chassis with tipping function (L2-70 and L3-70 l) provide a high degree of manoeuvrability. Equipped with a hopper made of impact-resistant plastic and a bypass cooled suction motor. Hako- Supervac L3-70 I with high-grade stainless steel hopper and 3 x 1,200 Watt for dry vacuuming of dust and shavings or vacuuming up oily residues and liquids. For commercial use in offices and hotels Supervac L2-70 Supervac L3-70 l Technical Data Supervac L1-15 L1-30 L2-70 L3-70 I Deployment possibilities Wet/Dry Wet/Dry Wet/Dry Wet/Dry Nominal voltage V/Hz 230/50 230/50 230/50 230/50 Nominal power W 1,300 1,300 2,600 3,600 Vacuum mbar 233 233 233 233 Air flow rate l/sec 56 56 112 168 Bypass motor Yes Yes Yes Yes Sound pressure level dba 71 71 75 79 Gross dust container volume l 17 26 62 78 Weight without accessories kg 13 15 27 34 Cable lengths m 12 12 12 12 Suction hose length m 2 2.5 2.5 2.5 Nominal size, accessories mm 36 38 38 38 Page 57 Wet and dry vacuum systems
Carpomatic 34 For powerful cleaning Page 58 Wet and dry vacuum systems Carpomatic 34 A compact carpet cleaning machine for quick, thorough cleaning of small and medium-sized areas. The cylindrical brush system enables the machine to be used on practically all textile flooring. The two powerful suction squeegees en-sure only a minimal amount of residual moisture remains on the floor. After just a short drying time, the area cleaned is ready to walked be on again. The folding handlebar can be adjusted for transport. All the operating elements are within direct visible range and immediately accessible. The dosing of the water supply can be adjusted manually. The Carpomatic is equipped with a diaphragm tank made of sturdy plastic; the tank volume can be exploited to the full, enabling maximum area coverage with each tank filling. A comprehensive range of manual accessories simplifies cleaning upholstery, confined spaces or stairs. Technical Data Carpomatic 34 Working width cm 33 Effective vacuuming width cm 37 Theoretical area coverage m 2 / h 150 Power supply, mains V /Hz 230 / 50 Nominal consumption Watt 1,300 Watt Cable length m 20 Method of propulsion Manual Brush speed rpm 510 Solution/Recovery tank litre 32 / 33 Length / Height (with handlebar) cm 93 107 / 86 96 Width / Weight cm/ kg 44 / 39 Method of operation 1. Sprays on the cleaning solution. 2. Mechanical cleaning of the carpet pile by means of a cylindrical brush. 3. Vacuums the area dry all in one working operation.
Cleaning Technology Municipal Technology Uncompromised multifunctionality! The demands made of municipal technology is as diverse as life in the city itself from urban cleaning to lawn and garden maintenance and winter services. Hako provides support in the form of individual solutions for reliable and economic completion of these tasks even when they are more extensive than initially conceived: The compact attachment supports and transporters are interesting alternatives here! Ask for our Municipal Technology Catalogue: info@hako.com. Page 59
Hako: environmentallyfriendly from the start We want to leave the earth clean. Therefore, treating resources, the environment and climate with consideration influences all our business activities. Close to you wherever you are Our unsurpassed, close knit sales and service network means we are always close by to provide help fast throughout the world.aa Cleanliness with safety Our machines fulfil the highest demands. Reliability through quality Made by Hako An interactive advisor to help select the best machine Your Sales and service partner: Individual tasks require individual solutions depending on the area to be cleaned or area of use. Use the virtual advisor by Hako to find the most appropriate machine to fulfil your demands, simply visit www.hako.com/va 81-10-2441/1 valid from December 2013 Hako GmbH Hamburger Straße 209-239 23843 Bad Oldesloe Germany Phone +49 (0) 4531-806 0 www.hako.com info@hako.com