SPERBER I ECOTRAK BUSSARD I SEEADLER DISC HARROWS IN X-ARRANGEMENT FOR TRACTORS FROM 90 TO 300 HP SPERBER BUSSARD SEEADLER ECOTRAK DISC HARROWS WITH REAR WHEEL AXLE www.rabe-gb.de
STUBBLE CULTIVATION Todays farmers are facing new tasks : the ever-changing requirements and circumstances in the areas of environment, economy and finance. To ensure the successful pursuit of his farm the farmer has got to have a good technical understanding and knowledge of the various tillage practices. Regardless of the harvested culture the stubble cultivation is the foundation for a healthy and bountiful harvest in the next year. Demands to the machine Comminution of the plant residues Creating the best conditions for emergence weeds and volunteer cereals Incorporation of the comminuted plant remains Uniform distribution of organic matter in the topsoil Controlling weeds Reconsolidation for optimum ground contact of the seed Crumbling the soil Uniform mixing of organic fertilizers and / or lime Loosening, leveling and seedbed preparation Shallow cultivation The solutions of RABE Thanks to years of experience and great expertise in the field of tillage RABE offers a wide range of disc harrows to meet your needs. SPERBER I BUSSARD I SEEADLER I ECOTRAK 2 3
GENERAL DESCRIPTION DISC HARROWS WITH REAR WHEEL AXLE SPERBER I BUSSARD I SEEADLER I ECOTRAK Due to the chassis which is located between the front and rear disc supports, the machine is compact and highly manoeuvrable. Hydraulic folding of the disc support for the transport. The front disc gangs are overlapping, those of the rear discs side by side - allowing it to cultivate the entire working width. The lower link attachment makes the machine ready to use quickly. The depth control via the roller, which reaches a good crumbling and consolidation of the soil at the same time. 4 Easy angle adjustment of the disc elements by mechanical spindles. Rear wheel axle. 5
SPERBER X I The Core of the series FOR TRACTORS FROM 90 TO 200 HP BUSSARD X I The versatile machine FOR TRACTORS FROM 160 TO 220 HP A DESIGN THAT INSPIRES Despite of its weight and size the SPERBER is a compact and highly manoevrable machine. The machine is ideal for small and medium-sized farms. A special feature of the HAWK is the precise depth control, which is managed via the integrated rear roller. After that the discs have worked the soil, the roller makes for a good crumbling and reconsolidation.the crushed plant residues are thus decomposed faster and it will be created very good conditions for emergence weeds and volunteer cereals. AN ENHANCED FRAMEWORK The hydraulic cylinders on the drawbar allow for optimal power transfer and precise adjustment of the working depth. All these features make the SPERBER a reliable partner in the stubble cultivation. The BUSSARD is suitable for medium and large farms. Through its single beam frame (dimensions 300x300x10 mm) the machine is very stable, which contributes to easier handling. The set points are easily accessible, which saves time and hassle. The mono beam chassis provides uniform weight distribution on the machine which is very stable at work. The front disc supports are overlapping, the rear ones arranged side by side. In this way, the soil is worked to the full working width of the machine. Nevertheless, the machine is compact and is very stable. BASIC SPERBER BASIC BUSSARD With the wheel axle before the integrated rear roller, the machine is very maneuverable and is also characterized by a high stability during transport. Single beam frame 300x300x10 mm Hydraulic vertical folding of the disc support ; : 2.50 m Chassis with two wheels, tyres with grooved tread 385/65-22.5 Grid-bar roller square rods (25 mm), Ø 500 mm Two double-acting hydraulic cylinder for the folding of the implement (Four at a heavy following roller) Depth control via the rear roller. The packer roller is connected by a hinge to the frame and provides hydraulic adjustment of the working depth. Single beam frame 300x300x10 mm Hydraulic vertical folding of the disc support ; : 2.76 m Chassis with two wheels, tyres with grooved tread for lorries Grid-bar roller square rods (25 mm), Ø 600 mm One double-acting hydraulic cylinder for the depth control The mecanical angle adjustment of discs. SPERBER Number of discs 28 32 36 40 44 Distance between discs 230 195-230 195-230 195-230 195-230 Working width 3.40 3.40-3.80 3.80-4.30 4.20-4.70 4.55-5.20 2.50 m Weight 4,800 4,900-4,950 5,050-5,100 5,200-5,250 5,350-5,400 Min. tractor power 90 120 150 180 200 BUSSARD Number of discs 40 44 48 52 Distance between discs 195-230 195-230 195-230 195-230 Working width 4.20-4.70 4.55-5.20 5.00-5.60 5.30-6.00 2.76-3.10 m Weight 7,050-7,150 7,200-7,300 7,800 7,800 Min. tractor power 160 180 200 220 6 7
SEEADLER X I The flagship of the series FOR TRACTORS FROM 160 TO 300 HP ECOTRAK X I A technical masterpiece FOR TRACTORS FROM 200 TO 300 HP THE STRONG SERIES The central frame of the SEEADLER is extremely robust to withstand easily to the high tensile loads. The side frames keeos the disc support into position - for a smooth working result on the entire working width. A ROBUST FRAMEWORK The frame of the ECOTRAK dimensioned 200x100x10 forms a solid welded unit and makes the machine robust and resistant. The side frames hold the disk support into position for a smooth working result on the entire working width. From the tractor cab the working discs always remain visible. For less than 3 m transport width the disc supports folds vertically. ROLLER EXCAVATION Depth control via the following roller - adjusted by hydraulic controls in the tractor cabin. Due to the drawbar and the depth control via the rear roller the machine remains stable and calm during work. The machine can also work without roller. BASIC SEEADLER Like all of the machines of this series, disc supports are mounted overlapped in the front and side by side in the rear. This gurantees a uniform prepared soil over the entire working width. BASIC ECOTRAK Centre beam frame 2x200x200x10 mm Hydraulic vertical folding of the disc support ; : 3 m or alternately mounted Chassis with two wheels, tyres with grooved lorries tread 385/65-22.5 Grid-bar roller square rods (25 mm), Ø 600 mm Two double-acting hydraulic cylinder for the depth control Centre beam frame 200x200x10 mm Hydraulic vertical folding of the disc support ; : 3 m or alternately mounted Low pressure tyres 400/60-15.5 A ICULARLY GOOD SOIL PENETRATION The special feature of the ECOTRAK is integrated tyre roller that also ensures the depth control of the machine. The higher weight o the machines makes for a better penetration of the discs into the soil. The packer roller is equipped with low-pressure tyres 400/60-15.5. The raised profile of the fulling tyres prevents soil sticking to the machine which makes it working reliably even under extreme conditions. Rear pneumatic roller with integrated carrying wheels Hydraulic adjustment of the pneumatic roller SEEADLER Number of discs 40 44 48 52 56 60 64 68 72 Distance between discs 195-200 195-200 195-200 195-200 195-200 195-200 195-200 195 195 Working width 4.20-4.70 4.55-5.20 4.90-5.60 5.30-6.00 5.70-6.50 6.00-6.90 6.50-7.40 6.90 7.30 3.03-3.50 m Weight 7,160 7,200 7,500-7,550 7,650-7,750 7,800-7,900 7,950-8,050 8,100-8,200 8,350 8,500 Min. tractor power 160 170 180 190 210 230 250 270 300 ECOTRAK Number of discs 41 49-53 61 61 69 Distance between discs 230 195-230 195 230 195 Working width 4.70 4.90-6.00 6.00 6.90 6.90 3 m Weight 8,000 8,500 9,000 10,000 10,500 Min. tractor power 200 230 260 280 300 8 9
MACHINERY S AND OPTIONS With a wide range of optional equipment RABE can offer machines for stubble cultivation meeting the individual needs of each farmer. OPTIONS SPERBER BUSSARD > ROBUST, JUST IN CASE Frame - Hydr. Vertical folding with four instead of two hydraulic cylinders - Set of two - or three-way electric valves Frame - Hydr. Vertical folding with four instead of two hydraulic cylinders - Set of two - or three-way electric valves The double tapered roller bearings are mounted in solid cast housings. The double lip seal reliably protects the bearings from water and dirt. This sturdy construction guarantees the durability of the disc support. The angle adjustment can be done hydraulically (optional). or Ø 710 mm, - Guiding plate at front or Ø 710 mm, - Guiding plate at front The RABE disc harrows can be equipped with the special Roll Coup discs (flatter profile). RABE provides a cover crap seeder that can be mounted on the respective harrow. Chassis - With tyres 500/45-22.5-550/45-22.5 - DIAMOND-roller Ø 540 or 650 mm - Square rod roller Ø 600 mm - Hydraulic excavation and depth control of the roller - Steel disc packer roller Ø 640 mm Chassis - Tyres 500/45-22.5-550/45-22.5 or 600/50-22.5 - Square rod axle, 100 mm - Steel disc packer roller Ø 640 mm - U-roller, one row - Tube rod roller Ø 900 mm (transportwidth 3.10 m) - DIAMOND-roller Ø 540 or 650 mm The assembly of smooth discs is also possible. > DIFFERENT FOLLOWING ROLLERS OPTIONALLY AVAILABLE In addition to the edge disc a guiding plate can be mounted on the front disc support (option). The choice of the follower roller is an important aspect of purchasing a machine, because re-compacting and crumbling of the soil are done by the roller. RABE offers a large number of different rollers for different soil conditions and desired results. Frame SEEADLER - Hydr. Vertical folding with vier instead of two hydraulic cylinders - Set of two - or three-way electric valves or Ø 710 mm, - Guiding plate at front ECOTRAK or Ø 710 mm, - Guiding plate at front - Following harrow, three rows Chassis - Tyres : 500/45-22.5-550/45-22.5 or 600/50-22.5 - Square rod axle, 100 mm Information about equipment and options can vary due to construction modification and country version. The roller bar leaves a slightly re-consolidated soil. The double row TWIN roller is particularly well suited for crushing plant residues and crumbling clods. The wavy discs are mounted on a square-rod (40 mm) with disc harrow bearings. 130 mm distance between the discs is large enough to prevent clogging. The KOMPRESSOR roller creates optimum conditions for volunteer cereals. Due to the good crumbling by the roller the soil can retain moisture very well. The DIAMOND roller is particularly robust and achieves a very good reconsolidation of the soil by its heavy weight. Clods or lumps reliably be broken up and the rapid emergence of the seed or crop failure is supported by the good soil contact. The U-roller is specially recommended on sandy soils. The rings have a diameter of 500 mm (60x6). - Steel disc packer roller Ø 640 mm - TWIN-roller, two rows - DIAMOND-roller Ø 540 or 650 mm - U-roller, one or two rows - Tube rod roller Ø 900 mm (transportwidth 3.10 m) 10 11
Discover the complete range of rabe! DIscHarroW combinations tines PLoUGHs subsoiler souchu Zi Nord les Gaudères 37 130 langeais France tél. (+33) 2 47 96 72 61 Fax (+33) 2 47 96 71 85 souchu@gregoirebesson.fr www.souchu.eu Dealer rabe am rabewerk 1 49 152 Bad essen Deutschland tel. +49 (0) 5472-771-0 Fax +49 (0) 5472-771-190 info@rabe-gb.de www.rabe-gb.de SPERBER I BUSSaRD I SEEaDLER I EcotRak