HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com PROTEM SAS Z.I. Les Bosses 26800 Etoile-sur-Rhône FR Phone: +33 (0) 4 75 57 41 41 Fax: +33 (0) 4 75 57 41 49 contact@protem.fr www.protem.fr PROTEM GmbH Am Hambiegel 27 76706 Dettenheim DE Phone: +49 (0) 7247 9393 0 Fax: +49 (0) 7247 9393-33 info@protem-gmbh.de www.protem-gmbh.de
The TNO CUTTING AND BEVELLING MACHINES were specially designed to fit your piping or tubing prefab application on site or in workshops for high quality weld reparation. The TNO CUTTING AND BEVELING MACHINES allow saving man hours by avoiding grinding operations, flame cutting, difficult handling and setting of pipes on a lathe. Tubes and pipes with OD diameters ranging from 4 to 36 / 114.3 to 914.4 mm will be cut and beveled! The TNO machines sever and bevel heavy wall pipes faster than any other machine. The TNO are transportable, rigid, fast and accurate. Tube processing Prefabrication workshops Pipeline Chemical Power generation Tube and pipe processing Nuclear and Power industries Oil and Gas The TNO serve virtually any industries where the weld quality is critical and projects must stay on schedule and on budget. The TNO machines allow saving place in your workshops and can be integrated in your production lines for unmatched results. Technical expertise for perfect weld end preps! Machining solutions for demanding industries! The cutting process is a cold cutting one! No heat affected zone!
The TNO machines are electrically driven and equipped with a hydraulic power unit for the automatic clamping system. Clamping screws located on the front and on the rear of the machine allow to adjust the concentricity and facilitate a perfect alignment and a perfect squaring. The tube is clamped from outside and the cutting tools are rotating around the tube. The automatic incremental feed system controls the two tool carriages with two feed speeds according to the application. The rotation speed of the tool holder plate is adjustable according to the tube diameter. Bevel forms: I, V, U or compound bevel. Specific weld end preps on request. ADVANTAGES : Very Powerful motoreductor Automatic feed via clutch system Maximum reliability High accuracy High performance Wide size range High production rate Versatility Modular design Safety chipguard Premium weld end preparation Adapted for extreme conditions Safe use on site or in prefabrication workshops Save a lot of space in your workshop Save tube transportation times Fast return of investment Proven efficiency Easy to handle and set up PROTEM SAS Phone: +33 (0) 4 75 57 41 41 Fax: +33 (0) 4 75 57 41 49 contact@protem.fr www.protem.fr PROTEM GmbH Phone: +49 (0) 7247 9393 0 Fax: +49 (0) 7247 9393-33 info@protem-gmbh.de
THE PROTEM TNO SERIES TNO 4-12 TNO 12-24 TNO 24-36 Clamping range 4 12 114.3-323.9 mm 12 24 323.9-610 mm 24 36 610-914.4 mm Clamping operation Automatic Automatic Automatic Machining time Few minutes Few minutes Few minutes Power supply 400 V 50 Hz 400 V 50 Hz 400 V 50 Hz stroke of the tool holder 100 mm 100 mm 100 mm Usable feed of cutting or bevelling tool bits 60 mm 60 mm 60 mm Feed of the clamping cylinders 100 mm 100 mm 100 mm Weight 1100 kg 1200 kg 1600 kg Larger models on request The minimum length needed to cut or bevel a pipe with these machines is > 1500 mm
OPTIONS TNO 4-12 TNO 12-24 TNO 24-36 Enveloping jaws for thin-wall pipes Lubrication kit Halogen spot-light Up and down-line tube conveyor Chip guard Copying carriage TUBE CONVEYORS Various types of tube conveyors can be used with the TNO machine range. The tube conveyor can be delivered in various configurations to meet the customer s application requirements. The tube conveyor can be supplied with different lengths 6 meters, 8 meters, 10 meters or 12 meters. Their height adjustment enables a very precise positioning of the tube in the mandrel. TOOL BLOCK CARRIAGE The tubes can be manually conveyed or be driven by motorized rollers. The rollers are zinc treated and therefore able to accept stainless steel tubes while avoiding any risk of pollution of the transported tubes. 100 mm stroke carriages or two ovalization tracking carriages are necessary. Depending on the application, A wide range of cutting or beveling tool-bits to are available, allowing to perform the majority of the required machining applications.
COUNTERBORING CARRIAGE The counterboring carriage allows to perform an ID bevel to get a regular land. CHIPGUARD The whole range of TNO units is fitted with a protective housing which covers the tool-plate. The housing represents a safety system for the operators. It has a slot to be able to adjust the position of the clutch pin that moves the tool carriage forward. LUBRICATION DEVICE In order to increase the lifetime of the inserts and to reduce the noise level during the machining works, a lubrication device shall be used : - This lubrication device is made up of a cutting fluid tank, covered by a chip container and a pump for circulating the cutting fluid. A flexible piping kit for aiming the fluid at the cutting point is also supplied together with a tank support plate. This option is activated through a push button.
CONTACT & COMMENTS OUR COMMITMENT! YOUR SATISFACTION! Serving our customers around the world with competence, efficiency and a reliable service is our main target. Whatever your questions, do not hesitate to consult us. Our staff will always advise you in a professional manner the right equipment that will meet your technical requirements. Call or email us for more information! PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com PROTEM SAS Z.I. Les Bosses 26800 Etoile-sur-Rhône FR Phone: +33 (0) 4 75 57 41 41 Fax: +33 (0) 4 75 57 41 49 contact@protem.fr www.protem.fr PROTEM GmbH Am Hambiegel 27 76706 Dettenheim DE Phone: +49 (0) 7247 9393 0 Fax: +49 (0) 7247 9393-33 info@protem-gmbh.de www.protem-gmbh.de YOUR COMMENTS