System tables 30 mm thick, coated with laminate, selection of 3 different front edges: Postformed edge, 70 mm high Edge band, 3 mm thick FlexiLine edge, replaceable. Permitted surface load on the tabletop: 200 kg Cable flap and cable tray The rear part of the tabletop is hinged, with a longitudinal brush strip for cable routing and for installing cable registers. Below this there is a large-volume steel plate tray for cables, multiple socket outlets, plug adaptors etc. Table frame Sturdy, circumferential rectangular pipe frame as the base frame, with a central stringer and all holes for table leg and base cabinet installation. Table legs Table legs made of aluminium extruded profile with 8 continuous grooves; two separate cable chambers on the inside for installation purposes. Integrated height adjuster to allow for floor unevenness. The front table legs can be recessed to give you more legroom without requiring any additional fittings (corner combinations, longitudinal rows of tables). The rear table legs are covered with removable functional plastic caps. Various types of swivel adaptors for all supplied lamps, swivel arms etc. can be mounted in the base profile prepared for this purpose. The rear table legs can also be extended to any height later on, thanks to a patented fastening technique which is invisible from the outside. (Patent number 4214520). Accessories Table base holders or also socket sets for the cable trays in the chapter Table Accessories. Advantages: Permanently versatile also for future activities thanks to InForm Open Space Technology The rear table legs are prepared for incorporation of swivel adaptors and system profile extensions Double cable chambers in the InForm system profile for installation purposes Front table legs can be recessed without additional fittings Several tabletop front edges to choose from Large-volume steel plate cable duct, open at the side, optionally available with caps on the side Elabo LaboratorySystems L 22
System tables Would you like a different table height than our standard of 750 mm? Then please select the table variant which you would like to have and include on your order "ZH height in mm". Example: 70-1G ZUZH80 for standard tables with a table height of 800 mm. Please note that other heights may only be available at additional charges. System table With lowerable flap and cable tray with 70-mm postformed edge at front, coated with HPL laminate, 30 mm thick. Effective depth of cable tray 195 mm. Robust FE pipe frame running under tabletop perimeter. Table legs made of multigroove extruded aluminium profile, with two separate cable chambers inside. The front table legs can be recessed to provide more legroom. Height: 750 mm For the ESD design, please also order module 01-4Z (connection possibility for grounding wrist strap) 2000 x 800 1800 x 800 1600 x 800 1500 x 800 1200 x 800 2000 x 900 1800 x 900 1600 x 900 1500 x 900 1200 x 900 2000 x 1000 1800 x 1000 1600 x 1000 1500 x 1000 1200 x 1000 70-1G ZU 70-1A ZU 70-1D ZU 70-1B ZU 70-1C ZU 70-3G ZU 70-3A ZU 70-3D ZU 70-3B ZU 70-3C ZU 70-2G ZU 70-2A ZU 70-2D ZU 70-2B ZU 70-2C ZU 70-4G ZU 70-4A ZU 70-4D ZU 70-4B ZU 70-4C ZU 70-9G ZU 70-9A ZU 70-9D ZU 70-9B ZU 70-9C ZU 70-5G ZU 70-5A ZU 70-5D ZU 70-5B ZU 70-5C ZU System table With lowerable flap and cable tray with 3-mm edge strip all round, coated with HPL laminate, 30 mm thick. Effective depth of cable tray 195 mm. Robust FE pipe frame running under tabletop perimeter. Table legs made of multigroove extruded aluminium profile, with two separate cable chambers inside. The front table legs can be recessed to provide more legroom. Height: 750 mm For the ESD design, please also order module 01-4Z (connection possibility for grounding wrist strap) 70-1G ZSU 70-1A ZSU 70-1D ZSU 70-1B ZSU 70-1C ZSU 70-3G ZSU 70-3A ZSU 70-3D ZSU 70-3B ZSU 70-3C ZSU 70-2G ZSU 70-2A ZSU 70-2D ZSU 70-2B ZSU 70-2C ZSU 70-4G ZSU 70-4A ZSU 70-4D ZSU 70-4B ZSU 70-4C ZSU 70-9G ZSU 70-9A ZSU 70-9D ZSU 70-9B ZSU 70-9C ZSU 70-5G ZSU 70-5A ZSU 70-5D ZSU 70-5B ZSU 70-5C ZSU System table With lowerable flap and cable tray with FlexiLine edge at front, coated with HPL laminate, 30 mm thick. Effective depth of cable tray 195 mm. Robust FE pipe frame running under tabletop perimeter. Table legs made of multigroove extruded aluminium profile, with two separate cable chambers inside. The front table legs can be recessed to provide more legroom. Height: 750 mm Replacement table edge FlexiLine in Chapter Table Accessories. 70-1G ZFU 70-1A ZFU 70-1D ZFU 70-1B ZFU 70-1C ZFU 70-3G ZFU 70-3A ZFU 70-3D ZFU 70-3B ZFU 70-3C ZFU 70-2G ZFU 70-2A ZFU 70-2D ZFU 70-2B ZFU 70-2C ZFU 70-4G ZFU 70-4A ZFU 70-4D ZFU 70-4B ZFU 70-4C ZFU 70-9G ZFU 70-9A ZFU 70-9D ZFU 70-9B ZFU 70-9C ZFU 70-5G ZFU 70-5A ZFU 70-5D ZFU 70-5B ZFU 70-5C ZFU For ESD design, please also order 01-4Z. Dimensions in mm Elabo LaboratorySystems L 23
C-Foot system tables Carrier profiles The aluminium table legs are attached in pairs to a sturdy aluminium carrier profile. The front and rear are covered with an attractively shaped plastic part and equipped with adjustable metal levelling plates. Open-Space technology All InForm table rack components can also be used with the Open-Space technology typical in aluminium system columns. Roller container In order to realise the full benefits of the C-foot bench, we recommend that you use roller containers. Cable duct Large cable duct used to hold cables, socket strips and power supply units. Cable flap Hinged cable tray cover with double sealing lip for cable no more loops over the rear table edge. Max. load capacity 200 kg. Elabo LaboratorySystems L 24
C-Foot system tables Would you like a different table height than our standard of 750 mm? Then please select the table variant which you would like to have and include on your order ZH height in mm. Example: 70-1G ZUZH80 for standard tables with a table height of 800 mm. Please note that other heights may only be available at additional charges. Height 750 mm 70 mm postformed edge at front consists of 4 aluminium table legs with hinged cable-tray cover 2000 x 800 1800 x 800 1600 x 800 1500 x 800 1200 x 800 2000 x 900 1800 x 900 1600 x 900 1500 x 900 1200 x 900 70-1G ZC1 70-1A ZC1 70-1D ZC1 70-1B ZC1 70-1C ZC1 70-3G ZC1 70-3A ZC1 70-3D ZC1 70-3B ZC1 70-3C ZC1 70-4G ZC1 70-4A ZC1 70-4D ZC1 70-4B ZC1 70-4C ZC1 70-9G ZC1 70-9A ZC1 70-9D ZC1 70-9B ZC1 70-9C ZC1 2000 x 1000 1800 x 1000 1600 x 1000 1500 x 1000 1200 x 1000 70-2G ZC1 70-2A ZC1 70-2D ZC1 70-2B ZC1 70-2C ZC1 70-5G ZC1 70-5A ZC1 70-5D ZC1 70-5B ZC1 70-5C ZC1 Height 750 mm With 3-mm edge strip all round consists of 4 aluminium table legs with hinged cable-tray cover 70-1G ZC1S 70-1A ZC1S 70-1D ZC1S 70-1B ZC1S 70-1C ZC1S 70-3G ZC1S 70-3A ZC1S 70-3D ZC1S 70-3B ZC1S 70-3C ZC1S 70-4G ZC1S 70-4A ZC1S 70-4D ZC1S 70-4B ZC1S 70-4C ZC1S 70-9G ZC1S 70-9A ZC1S 70-9D ZC1S 70-9B ZC1S 70-9C ZC1S 70-2G ZC1S 70-2A ZC1S 70-2D ZC1S 70-2B ZC1S 70-2C ZC1S 70-5G ZC1S 70-5A ZC1S 70-5D ZC1S 70-5B ZC1S 70-5C ZC1S Height 750 mm With replaceable FlexiLine edge at front consists of 4 aluminium table legs with hinged cable-tray cover, with ergonomically-shaped, replaceable black table edge at front. Replacement table edge FlexiLine in Chapter Table Accessories. 70-1G ZC1F 70-1A ZC1F 70-1D ZC1F 70-1B ZC1F 70-1C ZC1F 70-3G ZC1F 70-3A ZC1F 70-3D ZC1F 70-3B ZC1F 70-3C ZC1F 70-2G ZC1F 70-2A ZC1F 70-2D ZC1F 70-2B ZC1F 70-2C ZC1F 70-4G ZC1F 70-4A ZC1F 70-4D ZC1F 70-4B ZC1F 70-4C ZC1F 70-9G ZC1F 70-9A ZC1F 70-9D ZC1F 70-9B ZC1F 70-9C ZC1F 70-5G ZC1F 70-5A ZC1F 70-5D ZC1F 70-5B ZC1F 70-5C ZC1F Dimensions in mm Elabo LaboratorySystems L 25
Height-adjustable s Up/down button The height of Elabo-InForm system work surfaces can be adjusted via an electric motor using the integrated up/down button. Lifting elements The electric motor lifting elements ensure rapid height adjustment. Racks The height of mounted table rack elements are adjusted along with the table. The InForm profile allows direct cable routing from the rack into the cable tray. Advantages Table height adjustment from 740 to 1135 mm. Max. load capacity 150 kg. Permanently versatile for future activities using the InForm Open Space technology Choice of 3 different, visually appealing tabletop front edges: 70 mm postformed 3 mm edge strip 30 mm-flexiline edge, replaceable Fully welded steel pipe frame Large-volume steel plate cable duct Prepared to hold swivel adaptors and vertical profiles with adaptors at the left and right-hand sides Elabo LaboratorySystems L 26
Height-adjustable Height-adjustable with 70 mm postformed edge at front Technical data Width Depth Standard Continuously height-adjustable (740 mm to 1135 mm) via electric motor, consisting of 2 electromotive aluminium lifting columns 1 Up-Down button with lowerable cable-tray cover at rear 2000 x 800 1800 x 800 1600 x 800 1500 x 800 1200 x 800 2000 x 900 1800 x 900 1600 x 900 1500 x 900 1200 x 900 2000 x 1000 1800 x 1000 1600 x 1000 1500 x 1000 1200 x 1000 70-1G ZC3-1Q 70-1A ZC3-1Q 70-1D ZC3-1Q 70-1B ZC3-1Q 70-1C ZC3-1Q 70-3G ZC3-1Q 70-3A ZC3-1Q 70-3D ZC3-1Q 70-3B ZC3-1Q 70-3C ZC3-1Q 70-2G ZC3-1Q 70-2A ZC3-1Q 70-2D ZC3-1Q 70-2B ZC3-1Q 70-2C ZC3-1Q Height-adjustable with 3 mm edge strip all round Technical data Width Depth Standard Continuously height-adjustable (740 mm to 1135 mm) via electric motor, consisting of 2 electromotive aluminium lifting columns 1 Up-Down button with lowerable cable-tray cover at rear 70-1G ZC3-1SQ 70-1A ZC3-1SQ 70-1D ZC3-1SQ 70-1B ZC3-1SQ 70-1C ZC3-1SQ 70-3G ZC3-1SQ 70-3A ZC3-1SQ 70-3D ZC3-1SQ 70-3B ZC3-1SQ 70-3C ZC3-1SQ 70-2G ZC3-1SQ 70-2A ZC3-1SQ 70-2D ZC3-1SQ 70-2B ZC3-1SQ 70-2C ZC3-1SQ Height-adjustable with FlexiLine edge at front Replacement table edge FlexiLine in Chapter Table Accessories. Note: The height-adjustable (electrically powered) C-foot system tables are also available in a conductive ESD variant according to IEC 61340-5-1 for Electrostatic Protected Areas (EPA). Technical data Width Depth Standard Continuously height-adjustable (740 mm to 1135 mm) via electric motor, consisting of 2 electromotive aluminium lifting columns 1 Up-Down button with lowerable cable-tray cover at rear Dimensions in mm 70-1GZC3-1FQ 70-1AZC3-1FQ 70-1DZC3-1FQ 70-1BZC3-1FQ 70-1CZC3-1FQ 70-3GZC3-1FQ 70-3AZC3-1FQ 70-3DZC3-1FQ 70-3BZC3-1FQ 70-3CZC3-1FQ 70-2GZC3-1FQ 70-2AZC3-1FQ 70-2DZC3-1FQ 70-2BZC3-1FQ 70-2CZC3-1FQ Elabo LaboratorySystems L 27