2015 VALIDATION CATALOGUE For testing to CFPP NI/CFPP HTM SHTM WHTM EN NEW Validation Engineering Products from Isopharm IPREPORTS & TQSOFT VALIDATION Process Vaildation in FOUR Easy Steps See Page 14 MADGETECH WIRELESS DATA LOGGERS Use With For Our Range of Wireless Data Loggers See Page 2 EN 285 METAL LOAD IPREPORTS NOW INCLUDES CFPP+ NI/CFPP TEMPLATES NEW TQSoft Version 6 Coming Soon - WHTM Templates - SHTM Templates - EN Templates Version 6 See Our Upgrade Offers for Your Licence To the Specification of EN285 and as required by CFPP 01-01 For Our Range of Reference Loads See Page 16 www.isopharm.co.uk Data Loggers... Page 2 - Wireless - Benchtop Temperature Calibration... Page 4 - Temperature Calibrators - Temperature Reference Probes Pressure Calibration... Page 8 - Absolute Pressure Calibrators - Gauge Pressure Calibrators Thermometric Test Accessories... Page 10 - Threaded Entry Fittings - Tri Clover Entry Fittings - Thermocouple Cable - Thermocouple Connectors - Pressure Sensors Software... Page 14 - IPReports and TQSoft Steriliser Reference Loads... Page 16 - Textile Load - Metal Load Steam Penetration Tests... Page 17 - Bowie Dick - Metal Load Steam Quality Tests... Page 18 - Non-Condensable Gas Test - Dryness Test - Superheat Test Automatic Control Test & Record Keeping... Page 19 - Stopwatches - Process Monitoring Washer Reference Loads... Page 20 - Scope - Lumen Test Soils... Page 22 - EN Mixed - Dehydrated - Pre-Applied Protein Residue Tests... Page 24 - Ninhydrin Method - Biuret Method - Pyromol Method Ultrasonic Activity Tests... Page 25 - Foil Kit - Test Meters Water Quality Tests... Page 26 - Hardness - Conductivity - PH - TDS Isopharm Limited The Decontamination Support Centre Taylors Court Rotherham S62 6NU T: +44 (0)1709 52 52 56 F: +44 (0)844 8118 138 E: sales@isopharm.co.uk www.isopharm.co.uk E&OE. All prices are correct at the time of print and may change without notice. Full terms and conditions of sale can be found on the Isopharm website. Document Isopharm 2014 www.isopharm.co.uk Page 1
DATA LOGGERS For testing to CFPP NI/CFPP HTM SHTM WHTM EN Madgetech Wireless Data Loggers HiTemp 140 & HiTemp 140PT - Range: -200 C to +260 C - Operating Environment: -40 C to +140 C - Calibrated Accuracy: ±0.1 C (Over a range of +20 C to +140 C) PR 140 - Range: 0 to +5 bar gauge - Operational Environment: -40 C to +140 C - Calibrated Accuracy: ±0.03 bar gauge (Over a range of +20 C to 140 C) HiTemp 140 Temperature Logger 1 Inch Probe HiTemp 140PT Temperature Logger 24 Inch Probe PR140 Pressure Logger Suitable for use in validation of washer disinfectors and sterilisers. For full specifications visit www.isopharm.co.uk HITEMP140 Temperature Data Logger 1 inch Rigid Probe 332.67 +VAT HITEMP140PT Temperature Data Logger 24 inch Flexible Probe 332.67 +VAT +EYE Mounting Eyelet for HITEMP140 Range 11.00 +VAT PR140 Pressure Data Logger 645.34 +VAT MAGMOUNT Magnetic Mount 20.00 +VAT IFC400 USB Interface & Download Cradle 79.33 +VAT CALTR011 HITEMP140 Traceable Calibration 3 Points 73.00 +VAT CALTR012 PR140 Traceable Calibration 3 Points 73.00 +VAT Existing users of IPReports & TQSoft v6 can take advantage of using the MadgeTech range of wireless data loggers with their existing test specifications in TQSoft and report templates in IPReports. Our MadgeTech range provides rugged, high precision temperature and pressure data loggers that are built for use in validating washer disinfectors, sterilisers and harsh environments. USB Cradle Interface Magnetic Mount MADGETECH PACKAGE DEAL FOR EXISTING TQSOFT USERS 3 x TEMPERATURE & 1 x PRESSURE LOGGERS PLUS AN UPGRADE TO TQSOFT V6! PLUS LATEST VERSION OF IPREPORTS Package Includes: 2x HiTemp 140 1x HiTemp 140PT 1x PR 140 1x Interface Cradle + 1x TQSoft v6 Upgrade FOR ONLY 1,995.00 +VAT Calibration not included Page 2
www.isopharm.co.uk TinyTag Splash II Wireless Data Logger - Range: -30 C to +105 C - Operating Environment: -30 C to +105 C - Calibrated Accuracy: ±0.5 C - Waterproof, with a temperature rating of 105 C - Suitable for use in validation of washer disinfectors TINYTAGSP2 TinyTag Splash II Wireless Data Logger 148.63 +VAT TINYTAGDLP TinyTag USB Interface & Download Pad 35.88 +VAT TINYTAGCAL TinyTag Traceable Calibration 2 Points 35.88 +VAT Compatible with TQSoft v6 TINYTAGSOFT TinyTag Basic Explorer Software Package 49.00 +VAT TMI MiniVACQ Wireless Data Logger - Range: -40 C to +100 C - Operating Environment: -40 C to +100 C - Calibrated Accuracy: ±0.5 C - Waterproof, with a temperature rating of 100 C - Suitable for use in validation of washer disinfectors MINIVAQ TMI MiniVACQ Wireless Data Logger 565.00 +VAT MINIVAQCAB MiniVACQ Interface & Download Cable 340.00 +VAT Compatible with TQSoft v4 Onwards MINIVAQCAL Traceable Calibration 2 Points 85.00 +VAT Fluke NetDAQ 20 Channel Benchtop Data Logger Channels are configured to your specifications through TQSoft. Supplied with a 20 channel PAI, comms cable and mains cable. NETDAQ003 Fluke NetDAQ Data Logger with 20 Channel PAI 2,620.00 +VAT NETDAQ006 Spare NetDAQ PAI Board with 20 Channels 302.38 +VAT Compatible with TQSoft v4 Onwards NETDAQCASE Aluminium Carry Case for Fluke NetDAQ 50.00 +VAT www.isopharm.co.uk Page 3
TEMPERATURE CALIBRATION For testing to CFPP NI/CFPP HTM SHTM WHTM EN JOFRA CTC320A Temperature Calibrator SEE OUR TEMPERATURE CALIBRATOR COMPARISON ON PAGE 7 - Range: +33 C to +320 C - 5 Well Insert: 1x 3.0mm, 1x 4.0mm 1x 5.0mm, 1x 6.0mm, 1x 9.0mm TQSoft AUTOMATIC CALIBRATION Complete with Traceable Calibration Certificate and Robust Aluminium Carry Case Automatic Calibration through TQSoft when used with a compatible Reference Probe JOFRACTC320 JOFRA CTC320A Temperature Calibrator 2,940.00 +VAT CALUK001 UKAS Calibration of Temperature Calibrator 261.38 +VAT JOFRA CTC140A Temperature Calibrator SEE OUR TEMPERATURE CALIBRATOR COMPARISON ON PAGE 7 - Range: -17 C to +140 C - 4 Well Insert: 1x 3.0mm, 1x 4.0mm 1x 5.0mm, 1x 6.0mm TQSoft AUTOMATIC CALIBRATION Complete with Traceable Calibration Certificate and Robust Aluminium Carry Case Automatic Calibration through TQSoft when used with a compatible Reference Probe JOFRACTC140 JOFRA CTC140A Temperature Calibrator 3,213.38 +VAT CALUK001 UKAS Calibration of Temperature Calibrator 261.38 +VAT JOFRA ETC400A Temperature Calibrator SEE OUR TEMPERATURE CALIBRATOR COMPARISON ON PAGE 7 - Range: +28 C to +400 C - 5 Well Insert: 1x 2.0mm, 1x 3.0mm 1x 4.0mm, 1x 6.0mm TQSoft AUTOMATIC CALIBRATION Complete with Traceable Calibration Certificate and Robust Aluminium Carry Case Automatic Calibration through TQSoft when used with a compatible Reference Probe JOFRAETC400 JOFRA ETC400A Temperature Calibrator 1,655.00 +VAT CALUK001 UKAS Calibration of Temperature Calibrator 261.38 +VAT Page 4
www.isopharm.co.uk JOFRA ITC155A Temperature Calibrator With an accuracy of ±0.18ºC The Jofra ITC155A has an exclusive price only available from Isopharm -Range: -23 c to +155 c - 9 Well Insert: 8 x 3.0mm, 1 x 1/4 Complete with Traceable Calibration Certificate and Robust Aluminium Carry Case Automatic Calibration through TQSoft using the internal Reference Sensor TQSoft AUTOMATIC CALIBRATION JOFRAITC155A JOFRA ITC155A Temperature Calibrator 2,640.00 +VAT CALUK001 UKAS Calibration of Temperature Calibrator 261.38 +VAT TQSoft AUTOMATIC CALIBRATION WHAT IS TQSoft AUTOMATIC CALIBRATION? Fully Automatic System Calibration for Pre and Post-Test Calibrating input channels is fully automatic. TQSoft controls both the temperature calibrator and reference probe, evaluating the stability of both the test thermocouples and the reference. Calculating the offset values, TQSoft then automatically applies them to each channel independently. TQSoft also simultaneously generates and archives full and traceable calibration data for inclusion within the validation report. Checking the system calibration post-test is also fully automatic, confirming that calibration has not drifted and is still within the required tolerance. TQSoft again simultaneously generates and archives full and traceable calibration check data for inclusion within the validation report. www.isopharm.co.uk Page 5
TEMPERATURE CALIBRATION For testing to CFPP NI/CFPP HTM SHTM WHTM EN Fastcal Temperature Calibrator - Range: -35 C to +140 C - 4 Well Insert: 2x 4.5mm, 1x 6.5mm 1x 8.0mm TQSoft AUTOMATIC CALIBRATION Complete with Independent Reference Probe, Traceable Calibration Certificate and Soft Carry Case Automatic Calibration through TQSoft v4.2.7 when used with the supplied Reference Probe FASTCALLOW Fastcal Low Complete Temperature Calibrator 2,738.57 +VAT Compatible with TQSoft v4.2.8 Onwards CALUK001 UKAS Calibration of Temperature Calibrator 261.38 +VAT JOFRA DTI050 Temperature Reference - Range: -50 C to +400 C (with the STS-050 Sensor) - Accuracy: ±0.04 C (with the STS-050 Sensor) TQSoft AUTOMATIC CALIBRATION Complete with STS-050 Sensor and Traceable Calibration Certicate JOFRADTI050 Jofra DTI050 Temperature Reference 1,455.00 +VAT Compatible with TQSoft v5 Onwards CALUK005 UKAS Calibration of Reference Probe 189.63 +VAT FLUKE 1523 Temperature Reference - Range: -200 C to +350 C (with the 5622 Sensor) - Accuracy: ±0.04 C (with the 5622 Sensor) TQSoft AUTOMATIC CALIBRATION Complete with 5622 Sensor and Traceable Calibration Certicate FLUKE1523KIT Fluke 1523 Reference with 5622-32P Probe 1,230.00 +VAT Compatible with TQSoft v4.2.8 Onwards CALUK005 UKAS Calibration of Reference Probe 189.63 +VAT Page 6
www.isopharm.co.uk A Comparison Guide for Your Temperature Calibrator 1: This unit has an in-built independent reference probe so can take advantage of the TQSoft automatic calibration feature. 2: Accuracy can be greatly improved when using a compatible reference probe and the TQSoft automatic calibration feature. 3: This unit will require an independent reference probe in order to take advantage of the TQSoft automatic calibration feature. 4: Isopharm advise that the ITC-155 s internal control sensor is accurate enough to ensure your system is still within the accuracy budget required by standards without the use of a reference probe. You can therefore still take advantage of the TQSoft automatic calibration feature using the unit s internal probe. FASTCAL COMPLETE JOFRA CTC 320A JOFRA CTC 140A JOFRA ETC 400A JOFRA ITC 155A Range Stability Reference Probe -35ºC to +140ºC +33ºC to +320ºC -17ºC to +140ºC +28ºC to +400ºC -23ºC to +155ºC 0.02ºC ±0.01ºC ±0.05ºC ±0.15ºC ±0.01ºC YES ¹ NO 2 NO 2 NO 2 NO 4 TQSoft Automatic Calibration YES YES YES YES YES Heating Time (approx) Well Sizes Physical Dimensions L x W x H Certificate Provided Carry Case Provided Accuracy with Reference Probe Total RRP - With Reference Probe Accuracy without Reference Probe Ambient to +140ºC 10 minutes 2 x 4.5mm 1 x 6.5mm 1 x 8.0mm 228 x 248 x 143mm Ambient to +140ºC 5 minutes 1 x 3.0mm 1 x 4.0mm 1 x 5.0mm 1 x 6.0mm 1 x 9.0mm 241 x 139 x 325mm Ambient to +140ºC 10 minutes 1 x 3.0mm 1 x 4.0mm 1 x 5.0mm 1 x 6.0mm 241 x 139 x 325mm Ambient to +140ºC 4 minutes 1 x 2.0mm 1 x 3.0mm 2 x 4.0mm 1 x 6.0mm 172 x 72 x 182mm Ambient to +140ºC 10 minutes Standard 8 x 3.0mm 1 x 1/4 Reference (removable inset, see options above) 241 x 139 x 375mm Traceable Traceable Traceable Traceable Traceable Soft Case Aluminium Case Aluminium Case None Aluminium Case ±0.15ºC ±0.04ºC ±0.04ºC ±0.04ºC ±0.04ºC 2,738.37 +VAT with integral Reference probe 4,395.00 +VAT with DTI50 Reference Probe 4,668.38 +VAT with DTI50 Reference Probe 3,110.00 +VAT with DTI50 Reference Probe 4,095.00 +VAT with DTI50 Reference Probe ±0.2ºC ±0.4ºC 3 ±0.5ºC 3 ±0.5ºC 3 ±0.18ºC Total RRP - Without Reference Probe 2,738.57 +VAT 2,940.00 +VAT 3,213.38 +VAT 1,655.00 +VAT 2,640.00 +VAT www.isopharm.co.uk Page 7
PRESSURE CALIBRATION For testing to CFPP NI/CFPP HTM SHTM WHTM EN Bar Absolute JOFRA IPI100A, Bar Gauge JOFRA XP2I Pressure Calibrators Our most popular Pressure Calibrators, complete with Traceable Calibration Certificate and Robust Aluminium Carry Case JOFRA XP2I Gauge - Range: -750mbar to +21 bar Gauge JOFRA IPI100A Absolute - Range: 0 to +7 bar absolute JOFRA XP2I JOFRA XP2I Gauge Pressure Calibrator 1,476.00 +VAT JOFRAIPI100A JOFRA IPI MKII 100A Absolute Pressure Calibrator 1,804.00 +VAT CALUK002 UKAS Calibration of Temperature Calibrator 194.75 +VAT Bar Absolute DRUCK DPI104, Bar Gauge Druck DPI104 Pressure Calibrators Economic gauge Pressure Calibrator, complete with Traceable Calibration Certificate and Robust Plastic Carry Case Druke DPI140 Absolute - Range: 0 to +7 bar absolute Druke DPI140 Gauge - Range: -750mbar to +7 bar Gauge DRUCK104ABKIT DRUCK DPI 104 & PV211 Absolute Pressure Calibrator 796.00 +VAT DRUCK104GAKIT DRUCK DPI 104 & PV211 Gauge Pressure Calibrator 796.00 +VAT CALUK002 UKAS Calibration of Temperature Calibrator 194.75 +VAT Bar Gauge FLUKE 718 100G Pressure Calibrator Top of the range gauge Pressure Calibrator, complete with Traceable Calibration Certificate Fluke 718 100G Gauge - Range: -750mbar to +10 bar Gauge FLUKE718100G Fluke 718-100G Pressure Calibrator 1,802.00 +VAT CALUK002 UKAS Calibration of Reference Probe 194.75 +VAT Page 8
THERMOMETRIC TEST ACCESSORIES For testing to CFPP NI/CFPP HTM SHTM WHTM EN 4 Lead Threaded Entry Gland - Brass - ¼ inch BSP Thread Allows up to 4 thermocouples into a chamber 4 Lead Entry Gland (Pressure) - Brass - ¼ inch BSP Thread Allows up to 4 thermocouples and 1 pressure into a chamber ENTRYG001 4 Lead Threaded Entry Gland 30.75 +VAT ENTRYG001A Replacement Seal 3.08 +VAT ENTRYG002 4 Lead Entry Gland w/pressure 30.75 +VAT ENTRYG001A Replacement Seal 3.08 +VAT 12 Lead Threaded Entry Gland - Brass - 1 inch BSP Thread - ½ inch reducer included Allows up to 12 thermocouples into a chamber BUY TWO 12 LEAD BRASS ENTRY FITTINGS FOR ONLY 76.00 +VAT EACH ENTRYG003 12 Lead Brass Entry Gland 87.13 +VAT ENTRYG003A Replacement Seal 3.08 +VAT TWINLOK Standard Entry Fitting - Brass or Stainless Steel - ¼ inch BSP Thread Allows access for thermocouple or hypodermic into a chamber BUY TEN BRASS TWINLOKS FOR ONLY 3.51 +VAT EACH TWINLOK001 Twinlok Test Plug Brass 4.05 +VAT TWINLOK003 Twinlok Test Plug Stainless 18.78 +VAT 12 Lead Threaded Entry Gland - Stainless Steel - 1 inch BSP Thread - ½ inch reducer included Allows up to 12 thermocouples into a chamber BUY TWO 12 LEAD STEEL ENTRY FITTINGS FOR ONLY 105.00 +VAT EACH ENTRYG004 12 Lead Threaded Entry Gland 117.88 +VAT ENTRYG003A Replacement Seal 3.08 +VAT TWINLOK Extended Entry Fitting - Brass - ¼ inch BSP Thread Allows access for thermocouple or hypodermic into a chamber BUY FIVE EXTENDED TWINLOKS FOR ONLY 21.54 +VAT EACH TWINLOK004 Twinlok Test Plug Extended 25.13 +VAT Page 10
www.isopharm.co.uk Tri Clover Feedthru - Stainless Steel - 50mm Tri Clover Fitting Allows up to 16 thermocouples into a chamber Tri Clover Clamp & Seal - Stainless Steel - 50mm Tri Clover Fitting Connects Tri Clover fittings BUY THREE CLAMPS FOR ONLY 35.00 +VAT EACH TRICL005 Tri Clover Feedthru 435.63 +VAT TRICL006 Feedthru Seal Set (Pack of 3) 52.00 +VAT TRICL001 Tri Clover Clamp 46.13 +VAT TRICL002 Tri Clover Clamp Seal 6.15 +VAT Tri Clover Blank Plate - Stainless Steel - 50mm Tri Clover Fitting Blanks a 50mm Tri Clover connection, used with a clamp Tri Clover Y Piece - Stainless Steel - 50mm Tri Clover Fitting Y Piece for 50mm Tri Clover connections used with a clamp BUY THREE BLANKS FOR ONLY 9.50 +VAT EACH TRICL003 Tri Clover Blank Plate 15.00 +VAT TRICL002 Tri Clover Clamp Seal 6.15 +VAT TRICL008 Tri Clover Y Piece 475.00 +VAT TRICL002 Tri Clover Clamp Seal 6.15 +VAT Tri Clover to ¼ Inch Thread - Stainless Steel - 50mm Tri Clover Fitting Converts a 50mm Tri Clover connection to ¼ inch thread BUY TWO CONVERTORS FOR ONLY 68.00 +VAT EACH TRICL004 Tri Clover to ¼ Inch Thread 71.75 +VAT TRICL002 Tri Clover Clamp Seal 6.15 +VAT Tri Clover Fittings Kit NEW PRODUCT - Stainless Steel - 50mm Tri Clover Fittings An Engineers kit containing: 2x Feed Thru 1x Y Piece 4x Clamps 1x Convertor to ¼ Thread 1x Blank Plate All required seals TRICLKIT001 Tri Clover Fitting Kit 1,625.00 +VAT www.isopharm.co.uk Page 11
THERMOMETRIC TEST ACCESSORIES For testing to CFPP NI/CFPP HTM SHTM WHTM EN Type T Selected Grade Flat Pair - 100 Meter Reels - Single Strand - 1/0.315 or 1/0.508 BUY FIVE REELS FOR ONLY 95.00 +VAT EACH BUY TEN REELS FOR ONLY 75.00 +VAT EACH THERMCAB001 Type T Cable 1/0.315 (100m) 138.38 +VAT THERMCAB003 Type T Cable 1/0.508 (100m) 138.38 +VAT Type T Miniature Plugs & Sockets - Copper/Constantan For use with thermocouple connections, to prevent water tracking through the thermocouple coating BUY TWENTY FOR ONLY 1.90 +VAT EACH THERMPLG001 Miniature Plug Type T 2.10 +VAT THERMPLG002 Miniature Socket Type T 2.10 +VAT Type T Selected Grade Twisted - 100 Meter Reels - Single Strand - 1/0.3 or 1/0.5 BUY FIVE REELS FOR ONLY 95.00 +VAT EACH BUY TEN REELS FOR ONLY 75.00 +VAT EACH THERMCAB002 Type T Cable 1/0.315 (100m) 138.38 +VAT THERMCAB004 Type T Cable 1/0.508 (100m) 138.38 +VAT Copper Miniature Plugs & Sockets - Copper/Copper For use with pressure connections BUY FIVE FOR ONLY 1.90 +VAT EACH PRESPL001 Miniature Plug Cu/Cu 3.03 +VAT PRESPL002 Miniature Socket Cu/Cu 3.03 +VAT Autoclave Tape Reel - Autoclave Indicator Tape - 18mm Width Masking Tape Reel - Standard Masking Tape - 18mm Width BUY FIVE REELS FOR ONLY 2.10 +VAT EACH BUY TEN REELS FOR ONLY 1.95 +VAT EACH TAPE001 Brownes Autoclave Tape 2.72 +VAT BUY FIVE REELS FOR ONLY 1.95 +VAT EACH BUY TEN REELS FOR ONLY 1.65 +VAT EACH MASKINGTAPE Masking Tape 2.57 +VAT Page 12
www.isopharm.co.uk Gauge Pressure Transducer COMES WITH CONNECTOR FOR USE WITH ISOPHARM POWER SUPPLY UNIT - Range: -1 to +3 bar Gauge - Cooling Fin - Sensor Connection ¼ Inch BSP Male Cable Connection for Isopharm PSU PRESGA002 Pressure Transducer -1 to +3 Bar Gauge 235.00 +VAT Absolute Pressure Transducer COMES WITH CONNECTOR FOR USE WITH ISOPHARM POWER SUPPLY UNIT - Range: 0 to +5 bar Gauge - Cooling Fin - Sensor Connection ¼ Inch BSP Male Cable Connection for Isopharm PSU PRESAB002 Pressure Transducer 0 to +5 Bar Absolute 235.00 +VAT Pressure Transducer Hypodermic - Hypodermic Adaptor - ¼ inch Female Connection - Seal Included Used with a TWINLOK to allow pressure transducer access to a chamber Pressure Transducer PSU - Power Supply Unit Complete with: PSU Mains Plug PSU to Logger Cable Miniature female socket to PSU Adaptor Cable also available to connect older pressure transducers PRESHY001 Hypodermic Adaptor 36.95 +VAT PRESPSU003 Pressure Transducer PSU 153.75 +VAT PRESPSUEN- CAB PSU / 2 Pin Copper Socket Adaptor 6.15 +VAT www.isopharm.co.uk Page 13
SOFTWARE For testing to CFPP NI/CFPP HTM SHTM WHTM EN IPReports Validation Systems with TQSoft v6 Fully Automatic System Calibration for Pre-Test Calibrating input channels is fully automatic. TQSoft controls both the temperature calibrator and reference probe, evaluating the stability of both the test thermocouples and the reference. with Calculating the offset values, TQSoft then automatically applies them to each channel independently. TQSoft also simultaneously generates and archives full and traceable calibration data for inclusion within the validation report. EVEN MORE DRIVERS IN v6, INCLUDING THE ANVILLE 825 with DISCOUNT FOR EXISTING TQSOFT USERS UPGRADING TO v6 Automatic Calculation of Thermometric Test Data During Process Validation The system is packaged with test specifications for many machine types. TQSoft automatically collects and calculates all the required thermometric data during the test process. This information can be viewed as either a chart display or data list. The encrypted data is then available for import into one of the many IPReport templates available. Page 14
www.isopharm.co.uk Decontamination Process Validation in FOUR Easy Steps. The system provides a complete solution for decontamination process validation. TQSoft is designed to minimise engineer time on site, whilst IPReports allows professional validation reports to be authored quickly. Fully Automatic Calibration Check for Post-Test Checking the system calibration post-test is also fully automatic, confirming that calibration has not drifted and is still within the required tolerance. with TQSoft again simultaneously generates and archives full and traceable calibration check data for inclusion within the validation report. Quickly Create Industry Recognised Validation Reports The library of validation report templates that is provided with IPReports includes EN, CFPP, NI/CFPP, HTM, WHTM and SHTM. with CFPP & NI/CFPP TEMPLATES INCLUDED Automation functionality is crammed in, ensuring that you spend a minimum amount of time preparing what has become known as an industry standard report, instantly recognised by AE(D) s across the UK. Measured test data is easily imported from TQSoft, providing a safeguard against human error. The report templates are not just for temperature and pressure validation. Manual tests, such as washer disinfector cleaning efficacy, are all catered for. This presents a single software package for documenting every test required for your validation reports. Coming Soon - WHTM Templates - SHTM Templates - EN Templates Contact Isopharm on +44 (0)1709 52 52 56 to Discuss Your Validation System www.isopharm.co.uk Page 15
STERILISER REFERENCE LOADS For testing to CFPP NI/CFPP HTM SHTM WHTM EN EN 285 Standard Test Sheets Sheet Size = 900mm x 1200mm Warp Threads/cm = 30 ±6 Weft threads/cm = 27 ±5 Pack of 40 cotton sheets, as well as making a Standard Test Pack, a sheet is also required to wrap a metal load (below). Type B Hollow Load Conforms to the requirements of BS EN 285 for performing the Hollow Load Test on Large Porous Load Sterilisers Helix device with 250 test strips, 134 C Sterilisation Cycles for up to 3.5 minutes TESTPACK001 Standard Test Pack Sheets 128.13 +VAT HELTB002 Type B Hollow Load & Strips 100.00 +VAT EN 285 Metal Load for Load Dryness Test For use in performing the Metal Load dryness test as required by CFPP 01-01 Part C and specified in EN 285. Created to the exact specifications of EN 285 and consists of: - Metal Screws Austenitic stainless steel, hexagon head screws, enough to make the required weight of 8.6kg - Wire Mesh Basket Austenitic stainless steel, with the specification as EN 285 - The Test Box Austenitic stainless steel, with the required ten holes on both sides, and a sealed lid as EN 285 Weighing scales and a sheet from a standard test pack are also required to perform the test. NEW PRODUCT Created to the exact specifications of EN 285 METLOA001 Isopharm EN 285 Metal Load 1075.00 +VAT TESTPACK001 Standard Test Pack 40 Cotton Sheets 900x1200mm 128.13 +VAT WEIGH002 Weighing Scales 32kg Readability 1g 325.00 +VAT WEIGH002CASE Carry Case for Weighing Scales 100.00 +VAT CALTR009 Traceable Calibration of Weighing Scales 125.00 +VAT Page 16
STEAM PENETRATION TESTS www.isopharm.co.uk Browne Dick Packs Available for: 121 C Sterilisation Cycles for 8 to 8.3 minutes 134 C Sterilisation Cycles for up to 3.5 minutes Box of 20 packs A4 Bowie Dick Sheets For use within a Standard Test Pack for performing the Bowie Dick test for steam penetration Pack of 50 sheets BOWIE003 121 C Bowie Dick Packs (20) 71.70 +VAT BOWIE001 134 C Bowie Dick Packs (20) 76.83 +VAT BOWIE006 Bowie Dick A4 Test Sheets (50) 37.67 +VAT Test Pack Carrier Carrier for a standard Test Pack. EN 285 Standard Test Pack CAN ALSO BE USED TO MAKE A 4KG TEST PACK FOR EN13060 Sheet Size = 900mm x 1200mm Warp threads/cm = 30 ±6 Weft threads/cm = 27 ±5) Pack of 40 cotton sheets, more than enough to make a Standard Test Pack weighing 7kg Wrap allows ease of assembly with no bunching at the corners. CARRIER001 Standard Test Pack Carrier 41.00 +VAT TESTPACK001 Standard Test Pack 128.13 +VAT WRAP001 Standard Test Pack Wrap 36.90 +VAT Test Pack Airing Rack Economic airing rack for preparation of test pack cotton sheets. Standard Test Pack Wrap For use with EN 285 Standard Test Pack. Allows easy wrapping of the pack with no bunching of material at the corners. Eyes at the top of the wrap provide a secure position for a free space thermocouple. AIRRACK001 Test Pack Towel Airing Rack 35.88 +VAT WRAP001 Standard Test Pack Wrap 36.90 +VAT www.isopharm.co.uk Page 17
STEAM QUALITY TESTS For testing to CFPP NI/CFPP HTM SHTM WHTM EN Steam Quality Test Kit Steam quality test equipment to qualify plant/utility/clean/pure steam generators, steam distribution systems and steam supplies to autoclaves. Test kit for use in performing Non-condensable gas test, Dryness test and Superheat test. Kit contains: - Non-condensable gas test condenser - Built in temperature gauge - Submersible cooling water pump & pipes - Burette & rubber filler - 250 ml measuring cylinder - Insulated connection pipe - Three pitot tubes - Stainless steel vacuum flask - Connection tube and clips - Rubber bung with stainless steel dip tube - Superheat measurement tube with lagging - Detailed instruction manual and training materials - Calculations on CD - Robust lightweight carrying case - 40x50x23cm 10 kg Weighing scales and thermometer not included. Supplied with ¼ BSP threaded connections. Typically used for either plant steam systems or steam systems having threaded steam pipework and fittings. STEAMQ001 Steam Quality Test Kit with Threaded Fittings 1,600.00 +VAT STEAMQ002 Steam Quality Test Kit with ½ TriCloverFittings 1,950.00 +VAT Weighing Scales - 3000g Weighing Scales - Readability 0.1g For use with the Steam Quality Test kit, specifically for the dryness test. Dual Input Thermometer Supplied with two probes for measuring steam temperature and superheat/ dryness test. WEIGH001 Weighing Scales 295.00 +VAT CALTR009 Traceable Calibration 125.00 +VAT SQREFPRO Dual Input Thermometer & Probes 495.00 +VAT CALUK005 Calibration of Reference Probe 189.63 +VAT Page 18
AUTOMATIC CONTROL TEST www.isopharm.co.uk Standard Digital Stopwatch Single line digital display Memory Stopwatch Triple line digital display Memory function STOPW001 Standard Digital Stopwatch 11.28 +VAT STOPW002 Memory Digital Stopwatch 23.58 +VAT Decontamination Process Monitoring Designed to sit alongside or replace a paper printer, SecuriLOG provides cycle monitoring for ultrasonic cleaners, washer disinfectors and sterilisers. - Logs decontamination process data electronically. - All data is encrypted and cannot be modified. - Instant indication to the operator of pass or failed cycles. Information is written to an SD card, and can then be imported into either the FREE SecuriLOG software (for the user) or directly into IPReports in place of paper printout (Validation Engineer). SecuriLOG Data Also Now Imports Into Available as either a benchtop Plug & Play or panelmounted data logger Securilog now allows you to import cycle data directly from the memory card into IPReports, displaying multiple cycle tickets per page. These form part of your final report pdf, removing the need to stick paper print outs into your validation report. www.isopharm.co.uk Page 19
WASHER REFERENCE LOADS For testing to CFPP NI/CFPP HTM SHTM WHTM EN STF HexaLumen - EWD Cleaning Performance Kit NEW PRODUCT A revolutionary approach to verify the cleaning effi cacy and blockage detection capability of your automatic endoscope washer disinfector. Cleaning Test Using STF HexaLumen Indicator Strips Blockage Test Using Red Caps with 0.5mm restricted holes EN ISO 15883-4 specifies the use of a surrogate device consisting predominantly of 2mm diameter PTFE tubes of length 1.5 meters. The Browne STF HexaLumen has been validated to be equivalent to the surrogate device specified in EN ISO 15883-4 and the test soils specified in ISO/TS 15883-5 for endoscopes; these standards dictate that an artificial soil is placed into a surrogate endoscope device, processed in the washing phase of an automated endoscope washer disinfector, then presence of residual soil determined. The Browne STF HexaLumen consists of four 2mm internal diameter PTFE tubes and two 1 mm internal diameter PTFE tubes, all of 1.5 meter length. One end of each tube is connected at its distal end to the automated endoscope washer disinfector using luer lock connectors. At the opposite end, the capsule head consists of 6 individual capsules which mirror the PTFE lumen diameters. The tubes and capsules are numbered and colour-coded red for 1 mm diameter and blue for 2 mm diameter. HEXAL001 Browne STF HexaLumen Device 349.00 +VAT HEXAL002 Browne STF HexaLumen Indicators (60) 59.99 +VAT PTFE Flexible Tubing with Luer Lock Connectors 1.5 meter length flexible tubing with a luer lock connector available in the following sizes: - 1.0mm Internal Diameter - 2.0mm Internal Diameter - 3.0mm Internal Diameter - 4.0mm Internal Diameter An economic solution for creating your own EWD surrogate device. SCOPE001 Teflon Test Tube 1.0mm Bore x 1.5 Meters 25.00 +VAT SCOPE002 Teflon Test Tube 2.0mm Bore x 1.5 Meters 25.00 +VAT SCOPE005 Teflon Test Tube 3.0mm Bore x 1.5 Meters 25.00 +VAT SCOPE003 Teflon Test Tube 4.0mm Bore x 1.5 Meters 25.00 +VAT Page 20
www.isopharm.co.uk TOSI Flexicheck - Flexible Endoscope Cleaning Efficacy Test - Test object simulates a flexible endoscope channel. - Use for monitoring the cleaning efficacy of endoscope washers with channel irrigation systems. - Simulates blood and mucus with two separate standardised test soils TOSIFLX001 TOSI FlexiCheck Test Strips (25) 93.50 +VAT TOSIFLX002 TOSI FlexiCheck Holder 90.00 +VAT TOSI LumCheck - Cannulated Instrument Cleaning Efficacy Test - Test object simulating cannulated instruments. - Use for monitoring the cleaning efficacy for reprocessing cannulated instruments in washer-disinfectors or ultrasonic cleaners Luer Lock Adaptors & Converters TOSILUM001 TOSI LumCheck Test Strips (25) 72.50 +VAT TOSILUM002 TOSI LumCheck Holder 51.50 +VAT Wassenburg Lancer Olympus Converts a Luer Lock Fitting to the correct adaptors for Wassenburg, Lancer or Olympus machines. LUERAD001 Luer Lock to Wassenburg Adaptor 27.50 +VAT LUERAD002 Luer Lock to Lancer Adaptor 27.50 +VAT LUERAD003 Luer Lock to Olympus Adaptor 13.50 +VAT www.isopharm.co.uk Page 21
TEST SOILS For testing to CFPP NI/CFPP HTM SHTM WHTM EN EN Instrument Washer Test Soil - 220ml pot - Edinburgh Soil - Mixed to ISO/TS 15883:5 Annex N BUY THREE POTS FOR ONLY 21.00 +VAT EACH SOIL1WD220 Instrument WD Test Soil 200ml 25.63 +VAT DEL004 Refrigerated Courier 25.63 +VAT EN Flexible Endoscope Test Soil - 60ml pot - Mixed to ISO/TS 15883:5 Annex R Please Note: CFPP 01-06 states Annex N test soil to be used when testing flexible endoscope washer disinfectors. BUY TWENTY FOR ONLY 7.50 +VAT EACH SOIL2EBD60 Endoscope WD Test Soil 60ml 8.72 +VAT DEL004 Refrigerated Courier 25.63 +VAT EN Bedpan Washer Test Soil - 220ml pot - Mixed to ISO/TS 15883:5 Annex P EN Urine Bottle Soil - 220ml pot - Mixed to ISO/TS 15883:5 Annex Q BUY THREE POTS FOR ONLY 28.00 +VAT EACH SOIL3BED220 Bedpan Test Soil 220ml 30.75 +VAT DEL004 Refrigerated Courier 25.63 +VAT BUY THREE POTS FOR ONLY 28.00 +VAT EACH SOIL4URI220 Urine Test Soil 220ml 30.75 +VAT DEL004 Refrigerated Courier 25.63 +VAT Dehydrated Instrument Washer Disinfector Test Soil Popular alternative to EN test soil for instrument washer disinfectors BUY THREE BOXES OF 10 FOR ONLY 109.50 +VAT EACH BUY TEN BOXES OF 10 FOR ONLY 88.00 +VAT EACH SOILB004 Brownes Test Soil - Pack of 10 Pots 114.00 +VAT SOILB002 Brownes Test Soil - Single Pot 22.00 +VAT Page 22
www.isopharm.co.uk STF Load Check Pre-Applied Test Soil Popular pre-applied soil test for regular cleaning efficacy tests BUY FIVE PACKS OF 100 FOR ONLY 30.00 +VAT EACH BUY TEN PACKS OF 100 FOR ONLY 25.00 +VAT EACH LOADC100 STF Load Check - Pack of 100 Strips 34.85 +VAT LOADH001 STF Load Check Holder 41.00 +VAT HexaLumen Indicators - Pack of 60 Indicators - For use with the STF HexaLumen Surrogate Device TOSI Test Soil Strips - Pack of 12 Strips - Test soil correlates to coagulated blood - Simulates joints of surgical instruments BUY FIVE BOXES FOR ONLY 63.00 +VAT EACH HEXAL002 STF HexaLumen Indicators (60) 59.99 +VAT TOSI001 TOSI Test Strips (12) 67.50 +VAT TOSI FlexiCheck Test Strips - Pack of 25 Strips - Test soil correlates to blood and mucus - For use with the TOSI FlexiCheck Device BUY THREE BOXES FOR ONLY 87.50 +VAT EACH TOSI LumCheck Test Strips - Pack of 25 Strips - Test soil correlates to blood - For use with the TOSI LumCheck Device BUY THREE BOXES FOR ONLY 67.50 +VAT EACH TOSIFLX001 TOSI FlexiCheck Test Strips (25) 93.50 +VAT TOSILUM001 TOSI LumCheck Test Strips (25) 72.50 +VAT www.isopharm.co.uk Page 23
PROTEIN RESIDUE TESTS For testing to CFPP NI/CFPP HTM SHTM WHTM EN Ninhydrin Protein Detection Method Popular product for residual soil detection. Incubation required. - Standard Pack provides 4 weekly tests with 12 ninhydrin and 4 arginine vials, plus 12 sterile swabs. - Bulk Pack provides 25 ninhydrin and 5 arginine control test vials, plus 25 sterile swabs BUY THREE BOXES OF 4 TESTS FOR ONLY 30.00 +VAT EACH BUY THREE BOXES OF BULK FOR ONLY 46.00 +VAT EACH NINHY001 Browne Ninhydrin Standard Pack - Four Tests 31.00 +VAT NINHY002 Browne Ninhydrin Bulk Pack 48.00 +VAT NINHY003 Ninhydrin Test Incubator 195.00 +VAT Clean-Trace Biuret Protein Detection Method ISOPHARM ARE THE EXCLUSIVE UK HEALTHCARE DISTRIBUTOR FOR HIGH SENSITIVITY CLEAN-TRACE TEST PENS Biuret Method as stated within - HTM, SHTM and EN 15883. Incubation required. CLEAN025 Clean-Trace Protein Test Pens - Pack of 25 54.84 +VAT CLEAN050 Clean-Trace Protein Test Pens - Pack of 50 106.09 +VAT CLEAN100 Clean-Trace Protein Test Pens - Pack of 100 205.00 +VAT INCUB002 Isopharm Biuret Test Incubator 133.25 +VAT CALTR007 Traceable Calibration of Incubator 97.38 +VAT Pyromol-E Protein Detection Methods Incubation not required. - Pyromol-E test kit for detection of protein residues in endoscope channels. Available in four diameters. BUY ANY THREE BOXES FOR ONLY 45.50 +VAT EACH NEW PRODUCT Pyromol Method as stated within CFPP 01-06. PYROE001 Pyromol E - 1.7mm Flexi Swab (6) 48.50 +VAT PYROE002 Pyromol E - 2.8mm Flexi Swab (6) 48.50 +VAT PYROE003 Pyromol E - 3.8mm Flexi Swab (6) 48.50 +VAT PYROE005 Pyromol E - 5.0mm Flexi Swab (6) 48.50 +VAT Page 24
ULTRASONIC ACTIVITY TESTS www.isopharm.co.uk Aluminium Foil Ultrasonic Activity Test Kit Kit contains: - Reel of Foil (20mm x 50m) - Masking Tape - Tape Measure - Scissors - Stopwatch - Carry Case FOILTK001 Aluminium Foil Ultrasonic Activity Test Kit 49.20 +VAT FOILR001 Aluminium Foil Reel 20.45 +VAT Ultrasonic Test Meter An alternative test method for performing an Ultrasonic Activity Test. Test meter provides indication of frequency and percentage power. Calibration required annually. ULTRA001 Ultrasonic Performance Meter 357.73 +VAT ULTRA003 Traceable Calibration of Ultrasonic Performance Meter 153.75 +VAT Sonocheck Ultrasonic Activity Test Vials Pack of 30 Test vials turn from green to yellow, indicating the correct level of ultrasonic activity has taken place SONOC001 SonoCheck Ultrasonic Activity Test Vials 90.00 +VAT www.isopharm.co.uk Page 25
WATER QUALITY TEST For testing to CFPP NI/CFPP HTM SHTM WHTM EN Total Hardness Drop Test Kit <50mg/L (CaC0 ³ ) HARDKIT001 Total Hardness Test Kit <50mg/L (CaC0 ³ ) 100.45 +VAT TH2065 TH2 18.45 +VAT TH3065 TH3 18.45 +VAT TH4065 TH4/CH3 18.45 +VAT TH5065 TH5 18.45 +VAT CH1P040 CH1P 18.45 +VAT CH2065 CH2 18.45 +VAT Drop test kit and refills for testing the Hardness of final rinse water TH4065 CH3/TH4 18.45 +VAT Conductivity Solutions 60ml bottles of Conductivity Solution refills CONDUS84 84uS 60ml 18.45 +VAT CONDUS1413 1413uS 60ml 18.45 +VAT CONDUS2765 2765uS 60ml 18.45 +VAT Multi-Parameter Pocket Tester Economic, multi-parameter water tester for: - ph - Conductivity - Total Dissolved Solids - Salinity - Temperature POCKTEST001 Multi-Parameter Pocket Tester 117.88 +VAT Page 26
www.isopharm.co.uk Eutech Ecoscan TDS6 - Total Dissolved Solids Meter & Kit Up to +/- 1% Full Scale Accuracy Kit contains: - TDS6 Meter & Batteries - Conductivity Electrode - 60ml Conductivity Solution 3,000ppm - 60ml Deionized Water - Robust Carry Case 3 YEAR TEST METER WARRANTY! TDSTK001 Eutech Ecoscan TDS6 Meter & Kit 287.00 +VAT Eutech Ecoscan ph6 - ph Meter & Kit High ph accuracy of +/- 0.01 Kit contains: - ph6 Meter & Batteries - Temperature Probe - ph Electrode - 60ml ph4 Buffer Solution - 60ml ph7 Buffer Solution - Robust Carry Case 3 YEAR TEST METER WARRANTY! PHTK001 Eutech Ecoscan ph6 Meter & Kit 287.00 +VAT Eutech Ecoscan CON6 - Conductivity Meter & Kit Up to +/- 1% Full Scale Accuracy Kit contains: - Con6 Meter with Batteries - Conductivity Probe - 60ml 12.88mS @ 25 C Conductivity Solution - 60ml 84uS @ 25 C Conductivity Solution - 60ml 1413uS @ 25 C Conductivity Solution - 60ml Deionized Water - Robust Carry Case 3 YEAR TEST METER WARRANTY! CONDTK001 Eutech Ecoscan CON6 Meter & Kit 287.00 +VAT www.isopharm.co.uk Page 27
For testing to CFPP NI/CFPP HTM SHTM WHTM EN Page 28