ABC-CMEF Craft Training Program CORE Audit Checklist Training Unit: Teacher: Auditor: Date: This audit should not be construed as a "safety" audit. The audit team reviewing the facility is charged with conducting a compliance review to ensure the training unit can effectively instruct and appropriately utilize the curriculum. The team will ask questions and note issues with regard to safety as it relates to the instructors emphasis on the curriculum. Auditors should not and will not present themselves as auditing the safety of the program. They will audit the ability of the training unit to teach the curriculum as deemed necessary by the ABC-Greater Houston Chapter. NOTE: An "X" indicates the school DOES NOT HAVE the line item. A "Blank Space" indicates the school DOES HAVE the line item. MODULE 00101-09 BASIC SAFETY Multimedia projector and screen Core Curriculum PowerPoint Presentation Slides (ISBN 0-13-6090809-X) Desktop or laptop computer Whiteboard/chalkboard Markers/chalk Pencils and scratch paper Variety of personal protective equipment, including: Hard hats Safety glasses, goggles, and face shields Safety harness Gloves Hearing protection Respiratory protection Variety of fire extinguishers Variety of communication tags and signs Variety of safety tags, including: Lockout/tagout tag Fire extinguisher tag Variety of ladders, including: Extension ladder Stepladder MODULE 00101-09 BASIC SAFETY - PERFORMANCE PPE should include safety goggles, hard hat, gloves, and safety harness. Personal fall protection gear Extension ladder 1
MODULE 00102-09 INTRODUCTION TO CONSTRUCTION MATH Calculator Standard ruler (with 1 16-inch markings) Metric ruler (with centimeters [cm] and millimeters [mm]) Tape measure Architect s scale Metric scale Engineer s scale Set of construction drawings Protractors MODULE 00103-09 INTRODUCTION TO HANDTOOLS Claw hammer Wood board with nails to practice removing with claw hammer Screwdrivers, including: Slotted Phillips Wood board with screws to practice using screwdrivers Nail pullers, including: Cat s paw Pliers, including: CHANNELLOCK pliers Boards with wire and soft metals to practice using pliers Measuring tools, including: Measuring tape Spirit level Squares, including: Carpenter s square Crosscut saw Sections of wood suitable for sawing Wrenches, including: Adjustable wrench MODULE 00103-09 INTRODUCTION TO HANDTOOLS - PERFORMANCE Claw Hammer Crosscut saw Cat s paw Screwdriver (slotted or Phillips) Adjustable wrench CHANNELLOCK pliers Spirit level Carpenter s square Measuring tape 2
MODULE 00104-09 INTRODUCTION TO POWERTOOLS Power drills, including: Electric drill Variety of drill bits Saws, including: Circular saw (Skillsaw ) Reciprocating saw (SawZall ) Miscellaneous power tools, including: Pneumatically powered nailer MODULE 00104-09 INTRODUCTION TO POWERTOOLS - PERFORMANCE Electric drill Circular saw Receprocating saw (SawZall ) Pneumatically powered nailer MODULE 00105-09 INTRODUCTION TO CONSTRUCTION DRAWINGS Door, window, and hardware schedules A complete set of plans, including: Civil Architectural Fire Protection Structural Mechanical Plumbing Electrical Specifications Construction drawings with title block Construction drawings with a legend Construction drawings with a gridline system Construction drawings with interior and exterior measurements MODULE 00105-09 INTRODUCTION TO CONSTRUCTION DRAWINGS - PERFORMANCE Floor plan supplied with this module MODULE 00106-09 BASIC RIGGING - Elective Identification tags for slings Copies of Figure 16 with labels covered Damaged slings or photos of damaged slings Anchor shackles and chain shackles Various types of pins, including: Screw pin shackle Round pin or straight pin shackle Safety shackle Damaged shackles and pins 3
Damaged and undamaged eyebolts Undamaged lifting clamps Rusty or corroded lifting clamps Damaged and undamaged rigging hooks MODULE 00106-09 BASIC RIGGING - PERFORMANCE Appropriate slings for a lift Appropriate hardware and/or lifting equipment MODULE 00107-09 BASIC COMMUNICATION SKILLS Fall protection harness Instructions for donning a safety harness Work-related forms, including: Accident reports Time and materials reports Training reports Time sheets RFIs (Request for Information) MODULE 00107-09 BASIC COMMUNICATION SKILLS - PERFORMANCE Work-related form (Handouts 4 and 5 are sample forms and are provided in the AIG) Safety harness MODULE 00108-09 BASIC EMPLOYABILITY SKILLS Various mission statements Variety of job listings Excerpts from federal laws prohibiting job discrimination News articles highlighting workplace incidents, including: Harassment Stress Drug and alcohol abuse MODULE 00108-09 BASIC EMPLOYABILITY SKILLS - PERFORMANCE Access to retrieve and print from the following basic software programs: Email Databases Internet MODULE 00109-09 INTRODUCTION TO MATERIALS HANDLING Materials to be moved, including: Pipes Pallets Stacks of boxes Sheets of plywood 4
Various objects to be lifted Material cart Hand truck MODULE 00109-09 INTRODUCTION TO MATERIALS HANDLING - PERFORMANCE Various objects for proper materials-handling techniques NOTE: Also check for items listed in the ABC-CMEF Craft Training Program Audit guide; checking for items such as fire extinguishers, posted evacuation notices, ventilation, etc. 5