210-060. Implementing Cisco Collaboration Devices v1.0. Version: Demo. Page <<1/10>>



Similar documents
Introducing Cisco Voice and Unified Communications Administration Volume 1

: Introducing Cisco Voice and Unified Communications Administration (ICOMM) v8.0 Course Introduction

IMPLEMENTING CISCO IOS TELEPHONY AND UNIFIED COMMUNICATIONS EXPRESS (IITUCX)

Implementing Cisco IOS Telephony and Unified Communications Express (IITUCX)

Implementing Cisco Unified Communications Voice over IP and QoS v8.0 (CVOICE v8.0) Version: Demo. Page <<1/8>>

CISCO UNIFIED COMMUNICATIONS MANAGER

Implementing Cisco IOS Telephony and Unified Communications Express (IITUCX)

IIUC Implementing Cisco IOS Unified Communications (IIUC) Version: Demo. Page <<1/9>>

CVOICE Exam Topics Cisco Voice over IP Exam # /14/2005

Implementing Cisco IOS Unified Communications (IIUC)

ADMINISTERING CISCO UNIFIED COMMUNICATION MANAGER

Version dated 25/11/ Course Title. NATO Voice over IP Foundation Course. 2.Identification Number (ID) 3. Purpose of the Course

Configuration Guide for Cisco Unified Communications Environments

Introducing Cisco Voice and Unified Communications. Version: Demo. Page <<1/7>>

Peer-to-Peer SIP Mode with FXS and FXO Gateways

CIPT1_8- Implementing Cisco Unified Communications Manager Part 1

Implementing Cisco Collaboration Devices CICD v1.0; 5 Days; Instructor-led

IP PBX. SD Card Slot. FXO Ports. PBX WAN port. FXO Ports LED, RED means online

shortcut Tap into learning NOW! Visit for a complete list of Short Cuts. Your Short Cut to Knowledge

Implementing Cisco Unified Communications Manager Part 1 Course IPT1 v9.0; 5 Days, Instructor-led

IP Telephony Deployment Models

Implementing Cisco Collaboration Applications **Part of the CCNP Collaboration certification track**

IMPLEMENTING CISCO VOICE COMMUNICATIONS AND QOS Volume 1

IP Telephony v1.0 Scope and Sequence. Cisco Networking Academy Program

Voice over IP Basics for IT Technicians

CCNA. Course Fee: 8500 INR (Lab Access, Software s, Books, Tool Kits & Tax Included) Course Duration: 5 Days

Course Outline: Introducing Cisco Voice and Unified Communications Administration

Cisco EXAM Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Buy Full Product.

Administering Cisco Unified Communications Manager (ACUCM) v10.0

Cisco Unified Communications IP Telephony Part 1 (CIPT1) v8.0. Course Objectives. Associated Certification. Required Exam(s) Price.

Gateways and Their Roles

Voice over IP (VoIP) Basics for IT Technicians

Implementing Cisco IP Telephony & Video, Part 1 CIPTV1 v1.0; 5 Days; Instructor-led

ehealth and VoIP Overview

Implementing Cisco IP Telephony & Video, Part 1

Implementing Cisco Unified Communications Manager Part 1, Volume 1

ZyXEL IP PBX Support Note. ZyXEL IP PBX (X2002) VoIP. Support Notes

Introducing Cisco Unified Communications Express

Cisco Implementing Cisco Unified Communications Manager, Part 1 v8.0 (CIPT1 v8.0)

Implementing Intercluster Lookup Service

IP Implementation in Private Branch Exchanges From 9:30 a.m until 4:30 p.m (7 hrs./day) 5 days / week

Configuration Notes 0217

2- Technical Training (9 weeks) 3- Applied Project (3 weeks) 4- On Job Training (OJT) (4 weeks)

Introducing Cisco Voice and Unified Communications Administration Course ICOMM v8.1; 5 Days, Instructor-led

Achieving Service Quality and Availability Using Cisco Unified Communications Management Suite

Implementing Cisco Voice Communications and QoS

Administering Cisco Unified Communication Manager v8.0 (ACUCM v8.0) Training

Configuring the Sonus SBC 2000 with Cisco Unified Call Manager 10.5 for Verizon Deployment

Release Notes for NeoGate TA410/TA X

SSVP SIP School VoIP Professional Certification

Implementing Cisco TelePresence Video Solution, Part 1

With 360 Cloud VoIP, your company will benefit from more advanced features:

Configuring Voice over IP

Cisco CME Features and Functionality

Communications Transformations 2: Steps to Integrate SIP Trunk into the Enterprise

D. No calling search space has been configured on the line. E. An incorrect device pool has been configured on the phone

Session Title: Exploring Packet Tracer v5.3 IP Telephony & CME. Scenario

How To Use Cisco Cucm For A Test Drive

Curso de Telefonía IP para el MTC. Sesión 1 Introducción. Mg. Antonio Ocampo Zúñiga

IP Telephony. User Guide. System SPA9000. Model No. Voice

"Charting the Course... Implementing Cisco IP Telephony & Video, Part 1 v1.0 ( CIPTV1 ) Course Summary

Network Connection Considerations for Microsoft Response Point 1.0 Service Pack 2

Cisco Unified Survivable Remote Site Telephony Version 8.0

SIP Internet Telephony Gateway

Operation Manual Voice Overview (Voice Volume) Table of Contents

Deploying Cisco Unified Contact Center Express Volume 1

Note: This case study utilizes Packet Tracer. Please see the Chapter 5 Packet Tracer file located in Supplemental Materials.

Configuring a Mediatrix 500 / 600 Enterprise SIP Trunk SBC June 28, 2011

VoIP Application Note:

Cisco Unified Survivable Remote Site Telephony Version 4.2

Cisco Small Business Unified Communications 300 Series

How To Set Up A Cisco Expressway Trunk On A Cnet Cnet Trunk On An Unidenm (Cisco Vcnet) Vcntl On A Uniden Mt.Net (Cnet Trunk) On A Multi

ADTRAN SBC and Cisco Unified Call Manager SIP Trunk Interoperability

IP Telephony Management

Hotline. Configure Hotline

Linksys Voice over IP Products Guide: SIP CPE for Massive Scale Deployment

SIP Trunking Quick Reference Document

Cisco Survivable Remote Site Telephony Version 7.0

AP200 VoIP Gateway Series Design Features & Concept AddPac R&D Center

CVOICE - Cisco Voice Over IP

User Manual. SIP Analog Telephone Adaptor SIP-GW2. Sedna Advanced Electronics Ltd.

NetVanta 7100 Exercise Service Provider SIP Trunk

Cisco Unified Survivable Remote Site Telephony Version 7.1

User Manual. ANALOG TERMINAL ADAPTOR Model: HT-842R. Release 1.2

Mediatrix 3000 with Asterisk June 22, 2011

Communications Manager Administration **Developed by Skyline ATS** Communications Manager Administration**Developed by Skyline ATS**

Grandstream Networks, Inc. UCM6510 Basic Configuration Guide

Deploying, Configuring, and Administering Microsoft Lync Server 2010

CISCO SPA3102 PHONE ADAPTER WITH ROUTER

Cisco CallManager configuration for BLU-103

Cisco Unified Survivable Remote Site Telephony Version 4.1

6.40A AudioCodes Mediant 800 MSBG

Implementing Cisco Voice Communications and QoS

13 Courses Quick Guide

Transcription:

210-060 Implementing Cisco Collaboration Devices v1.0 Version: Demo Page <<1/10>>

1. Which two technologies comprise a Cisco Presence deployment? (Choose two.) A. Cisco Unified Presence Server B. Cisco Unity Connection C. Cisco Unified Communications Manager D. Active Directory E. Cisco Unified Border Element F. Cisco Expressway,C 2. An engineer is configuring the Cisco Unified Communications Manager disaster recovery system. Which three statements about the disaster recovery system are true? (Choose three.) A. It requires the use of schedules for backups. B. Backup files are encrypted using the cluster security password. C. If the backup device is listed in a backup schedule, it cannot be manually deleted. D. If the backup does not complete within 40 hours, the backup times out. E. Archiving backups to tape drives is supported. F. SSL is used between the master and local agents. Answer: B,C,F 3. Which configuration causes PSTN users to experience a fail tone for every other call when trying to reach a particular number on Cisco Unified CME? A. ephone-dn is not assigned to the ephone. B. Duplicate ephone-dn is not assigned to the ephone. C. ephone is not registered. Page <<2/10>>

D. ephone does not exist for the ephone-dn. Answer: B 4. Which protocol is used to monitor active voice call quality? A. RTCP B. RTP C. QoS D. STP E. SDP 5. Which four fields must an administrator complete to create a new user in Cisco Unity Connection? (Choose four.) A. Alias B. User type C. Extension D. Corporate email address E. First name F. Last name G. Employee ID H. Template,B,C,H 6. The IP phone of user A is registered with Cisco Unified Communications Manager subscriber1 while the IP phone of user B is registered with subscriber2. User A is speaking to user B on an active call. A junior network engineer mistakenly reboots subscriber1. Page <<3/10>>

What effect does this have on the call? A. User A can hear B, but B cannot hear A. B. User A cannot hear B, but B can hear A. C. This action drops the call. D. This action does not affect the call. E. The call remains active, but quality may suffer. Answer: D 7. Which scenario allows user A in partition X to call user B in Cisco Unified Communications Manager? A. User B in partition X is not assigned to any CSS. B. User B in partition Y assigns both partitions to CSS-X. C. User B is not assigned to any partition or CSS. D. User B is assigned to partition Y and assigns to CSS-X. Answer: B 8. Two departments have their own call-park slot to park calls. Which feature on Cisco Unified CME allows one department to answer a call for another department? A. Call park B. Call forward C. Call transfer D. Pickup-group E. Barge-in Answer: D 9. Which option can an administrator use to add users to Cisco Unity Connection in different Page <<4/10>>

time zones? A. User Templates B. Call Handler Template C. Contact Template D. Directory Handler E. Interview Handler 10. For capacity planning purposes, a network administrator must provide a report to management that displays the number of phones registered per server. Where can the administrator obtain this information? A. Navigate to Cisco Unified Serviceability > Tools > Serviceability Reports Archive. B. Navigate to Cisco Unified Operating System Administration > Tools > System Reports. C. Navigate to Cisco Unified CM Administration > Tools > System Reports. D. Navigate to Cisco Unified Reporting > Tools > System Reports. 11. Which type of template should be used when a network engineer adds a new call center agent in the Cisco Unity Connection? A. Contact B. Call handler C. User D. Notification Answer: C 12. Which component is needed for a voice call to be processed between the enterprise Cisco Page <<5/10>>

Unified Communications system and a cell phone via the PSTN? B. Cisco Unified Communications Manager call processing node C. Cisco Unified Communications Manager Music On Hold node D. Cisco Integrated Service Router with digital signal processor resources Answer: D 13. An administrator wants to gauge the load and performance capacity of Cisco Unified Communication Manager devices, including conference bridges, gateways, and trunks. Which report would the administrator run? A. CAR B. CDR C. SIP D. RTMT E. CUBE 14. Which three choices are required for the boot process for a Cisco IP phone? (Choose three.) A. TFTP services B. DHCP services C. Voice VLAN D. Routing protocol E. TCP/IP F. PortFast,B,C Page <<6/10>>

15. Which Cisco Unified Communications Manager plug in allows administrators to proactively monitor the overall health of their Cisco cluster? A. RTMT B. Cisco AXL Toolkit C. Cisco CTL Client D. Cisco JTAPI E. Cisco TAPS 16. What is the interface type that you should use to connect a PSTN analog line to the VoIP network? A. FXS B. FXO C. E and M D. Serial Answer: B 17. A network engineer receives a report about poor quality on an active call between the IP phone of user A over the WAN to the IP phone of user B. Using web access to the phone, the network engineer remotely checks call statistics such as jitter, network delay, and packet loss. Calculated packet loss is 3%, average jitter is 20 ms, network delay is 1 ms, and conceal seconds is 7. What is the most likely problem with this call? A. Calculated packet loss is too high. B. Average jitter is too high. C. Network delay is too high. Page <<7/10>>

D. Conceal seconds are too high. 18. An end user reports that conference calls are failing. Which fault domain should be investigated first? A. IP phone B. Cisco Unified Communications Manager Media Resources C. voice gateways D. network routers and switches Answer: B 19. A company has a 5-digit dial plan. A junior engineer inquires about the directory number external masks. Why are external masks used? A. to block calling number identification B. to enable called number identification C. to convert the calling directory number to the PSTN routable calling directory number D. to associate a directory number with a SIP endpoint Answer: C 20. After getting reports that users cannot make calls out to the PSTN, a network administrator opens the Cisco Unified Communications Manager Administration web page and begins to review route patterns. Why would the administrator look here when troubleshooting PSTN connectivity troubles? A. A route pattern contains a list of gateways that can reach the PSTN. B. A route pattern contains dial plan information for calling the PSTN. C. A route pattern contains the necessary privileges for calling the PSTN. Page <<8/10>>

D. A route pattern contains a list of SIP trunks that can reach the PSTN. Answer: B Page <<9/10>>

Powered by TCPDF (www.tcpdf.org) Over 3500+ Practice Tests Available 1. Our study material meets with the exact 2. Immediate access to Questions and Answers after buying 3. 100% Exam Passing Assurance 4. Money Back Guarantee 5. Free Updates for 120 Days 6. 100% Passing Rate Page <<10/10>>