www.samsonitefurniture.com (844) 218-7049 Manufacturing specifications are subject to change without notice. Dimensions refer to packing capacity and are approximate. California Proposition 65 Warning: WARNING: This product contains chemicals know to the state of California to cause cancer, birth defects or other reproductive harm. Samsonite is a registered trademark of Samsonite IP Holdings S.àr.l. 2014 Samsonite IP Holdings S.àr.l. 2014 FURNITURE
S FURNITURE HISTORY Jesse Shwayder founded Samsonite on March 10, 1910 with a vision for creating luggage of the finest quality and craftsmanship, able to withstand the perils of travel, marrying durability with functionality. In 1931, Samsonite began making furniture with card tables that sold for $1 each, followed shortly by folding chairs in 1936. The company began to advertise furniture and by 1938 was making more money from furniture than luggage. In 1953, after many years of success, the Samsonite Furniture Co. was formed. As the market leader, Samsonite dominated the folding chair and patio markets achieving market share highs in 1987 of 45% in folding chairs and 16% in the patio furniture category. Today, Samsonite continues its legacy of producing high quality, commercial grade furniture. Built for the stresses of everyday use but styled to compliment any home, office or venue, all backed by our 10 year warranty. CONTENTS: 2000 Series Injection Mold Fanback Folding Chair & Chair Trolley.... 3 2200 Series Injection Mold Folding Chair & Chair Trolley........... 4 2700 Series Commercial Grade Folding Chair............... 5 2800 Series Commercial Grade Vinyl Padded Folding Chair..... 6 2900 Series Commercial Grade Fabric Padded Folding Chair.... 7 3000 Series Commercial Grade Fanback Padded Folding Chairs.. 8 XL Series Commercial Grade Fanback Padded Folding Chairs... 10 Comfort Series Folding Chairs............................... 12 Replacement Parts....................................... 15 Zurich Mesh Office Chair.................................. 17 Leather Office Chairs..................................... 18 Leather Big & Tall Office Chairs............................. 22 7700 Series Blow Mold Folding Tables........................ 27
2000 SERIES INJECTION MOLD FANBACK Deep radius back is contoured and vented for comfort. Can be stacked 60 chairs high to pass through a standard doorway. Frame finish is powder-coated for resistance to scratching and wear. The seat and back are made from for durability and easy maintenance. Reverse double-riveted cross-brace on rear legs helps stabilize chair on most surfaces. 2200 SERIES INJECTION MOLD Deep radius back is contoured for comfort. Can be stacked 60 chairs high to pass through a standard doorway. Frame finish is powder-coated for resistance to scratching and wear. The seat and back are made from for durability and easy maintenance. Reverse double-riveted cross-brace on rear legs helps stabilize chair on most surfaces. 49755-XXXX Injection Mold Fanback Folding Chair 49754-XXXX Injection Mold Folding Chair 20 gauge annealed tempered steel 6.5/Chair 59. 20 gauge annealed tempered steel 6.1/Chair 55/Carton Fanback design provides greater airflow Certified up to 300 lbs Non-marring leg caps BACK REST 8/Carton Certified up to 300 lbs Non-marring leg caps Each chair weighs less than 7 lbs BACK REST 8/Carton Each chair weighs less than 7 lbs N/A N/A COVER N/A COVER N/A CARTON SIZE (INCHES) 18.25 x 13.25 x 42.75 CARTON CUBE (CU FT) 5.98 CARTON SIZE (INCHES) 18.25 x 11.5 x 39.25 CARTON CUBE (CU FT) 4.77 34.5 15.7 15.7 41.5 2.25 31.5 15.7 15.7 38 2.25 18 18 1050 / 2901 White/ White 20.75 17.25 17.25 1050 / 2901 White/ White 2907 Grey/ Grey 19.25 17.5 17.5 2000 SERIES CHAIR TROLLEY Rugged chair trolley provides great mobility and storage for your injection mold fanback chairs. Made of heavy-duty, powder-coated steel, each trolley holds 60 stacked chairs to pass through a standard doorway. All 4 casters lock for added safety. 56496-2000 Series Chair Trolley 77 x 19 x 41 2200 SERIES CHAIR TROLLEY Rugged chair trolley provides great mobility and storage for your injection mold chairs. Made of heavy-duty, powder-coated steel, each trolley holds 60 stacked chairs to pass through a standard doorway. All 4 casters lock for added safety. 49759-2200 Series Chair Trolley 77 x 19 x 41 Large 6 locking casters 40/Trolley 4 Large 6 locking casters 40/Trolley 4 Easy-open top Fits through a standard door CARTON SIZE (INCHES) 39.5 x 21.5 x 5 CARTON CUBE (CU FT) 2.46 Easy-open top Fits through a standard door CARTON SIZE (INCHES) 39.5 x 21.5 x 5 CARTON CUBE (CU FT) 2.46 3 4
2700 SERIES COMMERCIAL GRADE STEEL Made with 18 gauge, powder-coated tubular steel and three riveted leg braces. Double hinged to provide both lateral and vertical support. Fully-contoured back to maximize comfort and allow for easy maintenance. 2800 SERIES COMMERCIAL GRADE VINYL PADDED STEEL Made with 18 gauge, powder-coated tubular steel and three riveted leg braces. Double hinged to provide both lateral and vertical support. Fully-contoured back with vinyl padding to maximize comfort and allow for easy maintenance. 1050 / 49751-XXXX Commercial Grade Folding Chair 49752-XXXX Commercial Grade & Vinyl Folding Chair Three riveted leg braces 9.2/Chair 48. Three riveted leg braces 10.9/Chair 48. Double hinged Certified up to 300 lbs BACK REST Double hinged Certified up to 300 lbs BACK REST N/A COVER N/A COVER Vinyl CARTON SIZE (INCHES) 19.75 x 9.75 x 39.75 CARTON CUBE (CU FT) 4.43 CARTON SIZE (INCHES) 19.75 x 9.75 x 39.75 CARTON CUBE (CU FT) 4.43 15.98 15.98 15.98 15.98 29.75 19 38.125 3.75 29.75 1408 Grey 2898 2899 / 19 38.125 4.5 5 6
2900 SERIES COMMERCIAL GRADE FABRIC PADDED STEEL Made with 18 gauge, powder-coated tubular steel and three riveted leg braces. Double hinged to provide both lateral and vertical support. Fully-contoured back with fabric padding to maximize comfort and allow for easy maintenance. 3000 SERIES COMMERCIAL GRADE FANBACK PADDED STEEL Made with 18 gauge, powder-coated tubular steel and three riveted leg braces. Double hinged to provide both lateral and vertical support. Fully-contoured and vented back and padded seat to maximize both comfort and maintenance. 1062 / Grey 49753-XXXX Commercial Grade & Fabric Folding Chair Three riveted leg braces Double hinged Certified up to 300 lbs 10.9/Chair 48. BACK REST COVER Fabric CARTON SIZE (INCHES) 19.75 x 9.75 x 39.75 CARTON CUBE (CU FT) 4.43 Three riveted leg braces Double hinged Fanback design provides greater airflow Certified up to 300 lbs Hand hold for easy transport 15.98 15.98 29.75 19 38.125 4.5 2900 / Beige Memory Foam Available On Select Models 7 8
49756-XXXX Commercial Grade Fanback & Vinyl Folding Chair Commercial grade vinyl padded seat Three riveted leg braces Double hinged Fanback design provides greater airflow XL SERIES COMMERCIAL GRADE FANBACK PADDED STEEL Made with 18 gauge, powder-coated elongated steel tubes and three riveted leg braces. Double hinged to provide both lateral and vertical support. Fully-contoured and vented back and padded seat to maximize both comfort and maintenance. Certified up to 300 lbs Hand hold for easy transport 10.9/Chair 48. BACK REST COVER Vinyl CARTON SIZE (INCHES) 20 x 13.5 x 45 CARTON CUBE (CU FT) 7.03 34.75 44 5.5 2899 / 1050 / 57310-XXXX Commercial Grade Fanback & Bonded Leather Folding Chair w/ Memory Foam Bonded leather and memory foam padded seat Three riveted leg braces Double hinged Fanback design provides greater airflow Certified up to 300 lbs Memory Foam Hand hold for easy transport 10.9/Chair 48. BACK REST Memory Foam Pad COVER Bonded Leather CARTON SIZE (INCHES) 20 x 13.5 x 45 CARTON CUBE (CU FT) 7.03 Three riveted leg braces Double hinged Fanback design provides greater airflow 12% larger seat Certified up to 400 lbs Hand hold for easy transport 34.75 44 5.5 2902 / Chocolate 1050 / 9 10
51659-XXXX Commercial grade vinyl padded seat XL Commercial Grade Fanback & Vinyl Folding Chair Three riveted leg braces Double hinged Fanback design provides greater airflow 12 % larger seat Certified up to 400 lbs Hand hold for easy transport 12.2/Chair 61.7/Carton BACK REST COVER Vinyl CARTON SIZE (INCHES) 20.75 x 13.75 x 46.75 CARTON CUBE (CU FT) 7.72 COMFORT SERIES Made with 18 gauge, powder-coated tubular steel and three riveted leg braces. Double hinged to provide both lateral and vertical support. Fully-contoured and expanded back with padding to maximize comfort. 36.25 16.93 16.93 45.75 6 23.25 19.25 19.5 2899 / 1050 / 51660-XXXX XL Commercial Grade Fanback & Fabric Folding Chair Commercial grade fabric padded seat Three riveted leg braces Double hinged Fanback design provides greater airflow 12 % larger seat Certified up to 400 lbs Hand hold for easy transport 12.2/Chair 61.7/Carton BACK REST COVER Fabric CARTON SIZE (INCHES) 20.75 x 13.75 x 46.75 CARTON CUBE (CU FT) 7.72 Three riveted leg braces Double hinged Certified up to 300 lbs Hand hold for easy transport 36.25 16.93 16.93 45.75 6 2900 / Beige 1062 / Grey Memory Foam Available On Select Models 11 23.25 19.25 19.5 12
57314-XXXX Comfort Series & Vinyl Folding Chair 57311-XXXX Comfort Series & Bonded Leather Folding Chair w/ Memory Foam Commercial grade vinyl padded seat and back Three riveted leg braces Double hinged Certified up to 300 lbs Hand hold for easy transport 10.9/Chair 61.7/Carton BACK REST COVER Vinyl CARTON SIZE (INCHES) 20 x 13.5 x 45 CARTON CUBE (CU FT) 7.03 Bonded leather and memory foam padded seat Three riveted leg braces Double hinged Certified up to 300 lbs Hand hold for easy transport 10.9/Chair 61.7/Carton BACK REST Memory Foam Pad COVER Bonded Leather CARTON SIZE (INCHES) 20 x 13.5 x 45 CARTON CUBE (CU FT) 7.03 Memory Foam 34.75 44 4 34.75 44 4 18.625 18.625 2899 / 1050 / 18.625 18.625 2902 / Chocolate 1050 / 57316-XXXX Comfort Series & Fabric Folding Chair Commercial grade fabric padded seat and back Three riveted leg braces Double hinged Certified up to 300 lbs Hand hold for easy transport 10.9/Chair 61.7/Carton BACK REST COVER Fabric CARTON SIZE (INCHES) 20 x 13.5 x 45 CARTON CUBE (CU FT) 7.03 34.75 18.625 44 18.625 4 2900 / Beige 1062 / Grey 13 14
REPLACEMENT PARTS Samsonite offers selected replacement parts for its folding chairs and office chairs. These replacement parts are made with the same quality care that customers have come to expect from Samsonite. 63226-XXXX Feet Caps (XL Series) 63229-XXXX Saddle Tips (XL Series) FITS THE FOLLOWING MODELS: 51659 XL Fanback & Vinyl Folding Chair 51660 XL Fanback & Fabric Folding Chair FITS THE FOLLOWING MODELS: 51659 Fanback & Vinyl Folding Chair 51660 Fanback & Fabric Folding Chair MATERIAL MATERIAL 40 per Color/Carton 40 per Color/Carton Front Front 2898 Rear Rear 2898 63227-XXXX Feet Caps (Comfort/Commercial Series) 63230-XXXX Saddle Tips (Comfort/Commercial Series) FITS THE FOLLOWING MODELS: 49751 Commercial Grade Folding Chair 49752 Commercial Grade & Vinyl Folding Chair 49753 Commercial Grade & Fabric Folding Chair 49756 Commercial Grade Fanback & Vinyl Folding Chair 57310 Commercial Grade Fanback & Bonded Leather Folding Chair 57311 Comfort Series Fanback & Bonded Leather Folding Chair w/ Memory Foam 57314 Comfort Series Fanback & Vinyl Folding Chair 57316 Comfort Series Fanback & Fabric Folding Chair FITS THE FOLLOWING MODELS: 49751 Commercial Grade Folding Chair 49752 Commercial Grade & Vinyl Folding Chair 49753 Commercial Grade & Fabric Folding Chair 49756 Commercial Grade Fanback & Vinyl Folding Chair 57310 Commercial Grade Fanback & Bonded Leather Folding Chair 57311 Comfort Series Fanback & Bonded Leather Folding Chair w/ Memory Foam 57314 Comfort Series Fanback & Vinyl Folding Chair 57316 Comfort Series Fanback & Fabric Folding Chair MATERIAL MATERIAL 40 per Color/Carton 40 per Color/Carton 2898 1408 Grey 2898 1408 Grey 63225-XXXX Feet Caps (Injection Mold) FITS THE FOLLOWING MODELS: 49754 Injection Mold Folding Chair 49755 Injection Mold Fanback Folding Chair REPLACEMENT PARTS MATERIAL 40 per Color/Carton 1908 White 1408 Grey 15
ZURICH MESH OFFICE Built to handle everyday use at the office while styled to fit the contemporary needs of a home. The Zurich mesh chair offers full adjustablity allowing for personal customization for your body type. LEATHER OFFICE Made with premium bonded leather, commercial grade gas lift and durable casters, providing all day comfort with great styling. No Tools Required Assembly No Tools Required Assembly 1090 Blue OFFICE CHAIRS 51172-XXXX No tools required assembly Zurich Mesh Office Chair Premium Nylon mesh allows for greater airflow while working Multifunction, 4 position locking recline with customized tilt tension control Convenient paddle handle for height and recline positions under armrest Pneumatic gas seat height adjustment and 360 swivel Adjustable lumbar support for your lower back Waterfall seat reduces pressure on legs and overall fatigue 45.8/Chair 50/Carton BASE UPHOLSTERY Nylon Mesh CASTERS ARM WHEELS GAS LIFT RANGE (INCHES) 3 CARTON SIZE (INCHES) 35.5 x 27.5 x 19 CARTON CUBE (CU FT) 10.73 51 19.25 20 27.5 25 18 No tools required assembly 4 position recline Bonded leather seating surfaces Adjustable height Adjustable torsion control 17 OFFICE CHAIRS 18
Memory Foam No Tools Required Assembly No Tools Required Assembly 51173- Lisbon Premium Bonded Leather Chair w/ Memory Foam 51177- Singapore Premium Bonded Leather Chair Constructed of supple premium bonded leather seating surfaces Constructed of supple premium bonded leather seating surfaces Coil spring seating wrapped in memory foam Multifunction, 4 position locking recline with customized tilt tension control Multifunction, 4 position locking recline with customized tilt tension control Pneumatic gas seat height adjustment and 360 swivel Pneumatic gas seat height adjustment and 360 swivel Contoured seat back provides built-in lumbar support for all day comfort 27 steel base with 5 fiberglass-reinforced Nylon casters provides both stability and durability 27 steel base with 5 fiberglass-reinforced Nylon casters provides both stability and durability Certified up to 300 lbs 60 mm coated Nylon casters Certified up to 300 lbs 46/Chair 53/Carton 27 28 42.3/Chair 5 BASE 49.25 49 BASE UPHOLSTERY CASTERS Bonded Leather 22.5 UPHOLSTERY CASTERS Bonded Leather ARM ARM OFFICE CHAIRS Memory Foam Pad WHEELS GAS LIFT RANGE (INCHES) 3 CARTON SIZE (INCHES) 32.5 x 27.5 x 20.5 CARTON CUBE (CU FT) 10.60 28.5 22 25.75 18 WHEELS GAS LIFT RANGE (INCHES) 3 CARTON SIZE (INCHES) 34.75 x 26.75 x 20.5 CARTON CUBE (CU FT) 10.56 OFFICE CHAIRS 19 20
LEATHER BIG & TALL OFFICE Made with supple bonded leather seating surfaces to provide the ultimate in comfort. Class IV gas lift and heavy-duty casters give this chair a 400 lb weight rating. No Tools Required Assembly No Tools Required Assembly 51178- Santa Barbara Premium Bonded Leather Chair Constructed of supple premium bonded leather seating surfaces Multifunction, 4 position locking recline with customized tilt tension control Pneumatic gas seat height adjustment and 360 swivel Exceptional lumbar support for all day comfort 27 steel base with 5 fiberglass-reinforced Nylon casters provides both stability and durability 60 mm coated Nylon casters 22.5 Built-in lumbar support No tools required assembly Certified up to 300 lbs Bonded leather seating surfaces BASE 45.8/Chair 5 50 26.5 Adjustable height Adjustable torsion control Big & Tall certified up to 400 lbs UPHOLSTERY CASTERS Bonded Leather ARM OFFICE CHAIRS WHEELS GAS LIFT RANGE (INCHES) 3 CARTON SIZE (INCHES) 34.25 x 26 x 20.5 CARTON CUBE (CU FT) 10.56 30 18 OFFICE CHAIRS 21 22
No Tools Required Assembly No Tools Required Assembly 51836- Hamburg Big & Tall Premium Bonded Leather Chair 51837- San Mateo Big & Tall Premium Bonded Leather Chair Constructed of supple premium bonded leather seating surfaces Constructed of supple premium bonded leather seating surfaces Adjustable torsion control for recline comfort Adjustable torsion control for recline comfort Built-in lumbar support for all day comfort Built-in lumbar support for all day comfort Pneumatic gas seat height adjustment and 360 swivel Pneumatic gas seat height adjustment and 360 swivel 27 steel base with 5 fiberglass-reinforced Nylon casters provides both stability and durability 23 19.25 27 steel base with 5 fiberglass-reinforced Nylon casters provides both stability and durability Color matching armrest and base Color matching armrest and base Big & Tall certified up to 400 lbs Big & Tall certified up to 400 lbs 32 27.75 49/Chair 58/Carton 47.5/Chair 56.5/Carton BASE 47 47.5 BASE UPHOLSTERY Bonded Leather 23 19.5 UPHOLSTERY Bonded Leather CASTERS CASTERS ARM ARM OFFICE CHAIRS WHEELS GAS LIFT RANGE (INCHES) 4 CARTON SIZE (INCHES) 34.5 x 28.5 x 21.75 CARTON CUBE (CU FT) 12.38 28 19.25 30.5 19 WHEELS GAS LIFT RANGE (INCHES) 4 CARTON SIZE (INCHES) 34.75 x 28.25 x 21.75 CARTON CUBE (CU FT) 12.36 OFFICE CHAIRS 23 24
7700 SERIES BLOW MOLD FOLDING TABLES Samsonite folding tables are lightweight and built to last. Each table is made of a rectangular tube frame for added rigidity and a high-density top for durability and easy maintenance. High-density (HDPE) is a linear polymer that is prepared from ethylene by a catalytic process. The absence of branching results in a more closely packed structure with a higher density and somewhat higher chemical resistance than low-density (LDPE). HDPE is also somewhat harder and more opaque and it can withstand rather higher temperatures (120 Celsius for short periods, 110 Celsius continuously). 16 gauge steel frame High-density top Tubular steel side rails Fully-welded connections 49763-2906 6 Ft Fold-In-Half Blow Mold Folding Table 16 gauge steel frame High-density top Tubular steel side rails Fully-welded connections Folds in half and features carry handle for easy transport and storage 29.3/Table 32.3/Carton TABLE TOP High-Density CARTON SIZE (INCHES) 30.37 x 4.12 x 37.62 CARTON CUBE (CU FT) 2.72 72 30 2906 Grey/ White 29.75 49760-2906 60 Round Blow Mold Folding Table 16 gauge steel frame High-density top Tubular steel side rails Fully-welded connections 49866-2906 6 Ft Blow Mold Folding Table 16 gauge steel frame High-density top Tubular steel side rails Fully-welded connections 30 72 41/Table 52. TABLE TOP High-Density CARTON SIZE (INCHES) 61 x 2.75 x 61 CARTON CUBE (CU FT) 5.62 29.75 60 60 2906 Grey/ White 29.3/Table 34. TABLE TOP High-Density CARTON SIZE (INCHES) 30.62 x 2.5 x 73.12 CARTON CUBE (CU FT) 3.24 29.75 2906 Grey/ White 49761-2906 72 Round Blow Mold Folding Table 16 gauge steel frame High-density top Tubular steel side rails Fully-welded connections 49764-2906 8 Ft Blow Mold Folding Table 16 gauge steel frame High-density top Tubular steel side rails Fully-welded connections FOLDING TABLES 57.1/Table 77.6/Carton TABLE TOP High-Density CARTON SIZE (INCHES) 72 x 2.85 x 72 CARTON CUBE (CU FT) 8.56 29.75 72 72 2906 Grey/ White 40.75/Table 47.8/Carton TABLE TOP High-Density CARTON SIZE (INCHES) 97 x 2.75 x 30.6 CARTON CUBE (CU FT) 4.72 96 29.75 30 2906 Grey/ White FOLDING TABLES 27 28