Master M5 Quadra Combat M1 Combat M3 Master M5 Master M5 630
Master M5 Digital Flexo for Unlimited Substrates MIS/JDF work fl ow Short web path on 27 chilled drum High PowerIR Dryers on Double Drum Quick-Cut Automatic waste matrix stripping Digital print pressure and register control Multiple PC Control Interfaces New Cold Foil unit The Original Flower (1999) Patents EP1092540, EP1092536 Master M5 Sleeves Master M5 Cylinders Short web path on a 27 driven impression chilled drum Digital automatic pressure and register adjustments Digital die-cutting pressure control The new Master M5 introduces the Digital Flexo technology: print pressure and register are controlled by digital eyes and fi ngers (HD Digital Cameras combined with 7 servo motors per print unit). Master M5 performs the shortest set up times and a digitally controlled quality on labels, aluminum foils, sleeves, carton, laminated tubes and the most diffi cult substrates. Automatic matrix waste stripping Multiple PC Control Interfaces for easy remote press operations Double chilled drums for high-power IR dryers on film Error-free JDF/MIS automated file management New high-speed cold foiling unit for sharp details Available for print sleeves or cylinders 2
Digital Flexo: digitally operated technologies for automated printing and converting Print Register Print Pressure Die-Cutting Pressure Matrix stripping Print Tutor A GIDUE HD Digital Camera reads a dedicated mark printed by each unit. It recognizes register deviation and dot gain and informs the servo motors on the press. Print Tutor Plus 4 mini servo-motors receive data of actual print from the Print Tutor Camera, confronts with the PDF/TIFF file, and corrects the printing pressure and register according to the original file. Vario Gap 2 mini servo-motors adjust the cutting height of the impression roller to the different thicknesses of the self-adhesive substrates. Quick Cut The press performs automatically the waste stripping without any manual support from the operator. Waste stripping is fully automated. Digital Flexo technology propose a new operator for the labels and packaging industry. Most of the basic operations are performed automatically by the press. The press also helps to avoid mistakes in the file management. Operator can concentrate on top quality and on productivity. Servo adjustments with digital feed-back to perform consistent digital quality Less differences in performance between operators Extremely reduced, and consistent digital wastes 3
Master M5 is interactive File Management Visual Quality eyes The press can talk to the operator informing him of the current quality status of each print unit, and eventually informing the MIS system. Master M5 warns the operator of eventual mistakes during plate mounting or print cylinder mounting on the press. M5 interacts with the MIS/JDF company system receiving the original data and distributing them to the press and to the plate mounting equipment. JDF/MIS system can set orders and priorities to the operators via the main PC press interface for eventual paper-less management. Hawk To avoid mistakes in plate mounting, original JDF/MIS Files are confronted with the actual plates mounted on the press. If mistakes are detected. wrong print cylinders are instantly rejected by the press, through an RFID GIDUE exclusive technology. Gilda Each print unit informs of its current status of quality (register and print pressure) to let him check instantly the performances of the press, while eventually taking care of next job preparation etc. Master M5 is connected via Internet to GIDUE operators for instant service diagnostics, SW upgrades and repairs. 4
REAL HS: digital hot-stamping Snow Ball: waste matrix stripping Servo-assisted pressure adjustment Front door opening and slide out unit for easy access Organizer for hot cylinders storage From 30% to 200% More label productivity Available as a retrofit to existing GIDUE presses PC Storage of optimized fine-tuned pressures for next job recall The revolutionary SnowBall waste matrix stripping system performs a sliding rewinding shaft for unprecedented stripping speeds in the label industry. Snow Ball is available on all Combat, Master and Xpannd press lines. Servo-motors for digital automated pressure and job recall of optimized jobs Slide-out and open front door for fast, safe and easy job change-overs (max 15 from job to job) Organizer for no-risk/no-weight handling of hot cylinders Master M5: Technical details Repeat Print Width Speed Number of units (max) GIDUE REAL (since 2006) is a dedicated hot stamping unit for frequent job change-overs typical of (i.e.) wine, cosmetic and spirit industries. Set-up operations are digital and repeatable, handling of dangerous hot cylinders is fully assisted, the unit opens to allow for safe and immediate change overs. Flexo 9-24 /12-24 (sleeve) 360/420/520/620 150-200 14 Screen 12-25 350/405/508 (RSI) 80-120 5 Hot Stamping 12-24 360/420/510 (REAL) 80-100 3 Die-Cutting 10 /12 /14-24 365/425/525 150-200 2+1 5
Master M5: innovation to profit Process Heads: a range of opportunities The new Master M5, fully ARC-Simotion servo controlled, delivers advanced automation technologies to print on a wide range of substrates. The Master M5 is an effi cient solution to produce labels and unlimited packaging with low set-up costs, fast change-over times and controlled digital quality in production. The open front technology allows for multiple creative labels, booklets, coupons etc. (upper deck). The short web path on large 27-300 wrap chilled drums allows for excellent register stability on all substrates even without register control (middle deck). Hot-Stamping REAL (fixed) Automatic pressure, open front door access, lateral extraction, Organizer. Silk Screen RSI (Platform) Movable on each platform, servo driven, Organizer. Hot-Stamping READY (Flower) Movable on each Flower Head, independet storage on trolley. Silk Screen READY (Flower) Movable on each Flower Head, independet storage on trolley. The Double-Drum (27 +27 ) confi guration allows for both UV and IR drying, perfect transport and temperature control on all substrates (lower deck). Digital Flexo technology performs the shortest set up times, with full digital control on printing and converting operations. Stability during the years The special geometry of the Flower head prevents the mechanical wear from infl uencing the printing quality, the print cylinder and the print sleeve are held without guides and all the tolerances are recuperated. The press durable steel double frames contributes to keep the performances of the Master M5 press identical during the years. Embossing Rotary In die-cutting unit, with dedicated cart for male-female cylinders presetting. Gravure Fixed Easy change of print cylinder and ink tray. Highspeed dryer. Embossing FlatBed Possibility of combined embossing hotstamping. Heavy duty pressure, high speed. Ink Jet Fixed Numbering for security projects, with in-line 100% security inspection. 6
GIDUE: robust innovation for Labels and Packaging Nuova GIDUE S.r.l. collects the printing and converting competences of high-technology manufacturing companies: Offset presses for paper and packaging (Nuova Castagnoli - Form Consulta S.r.l.). Flexographic presses for labels and packaging (GIDUE S.p.A.). 1981 1984 1986 1993 1995 1999 2000 2002 2003 2004 2004 2005 2005 2006 2006 2007 2008 2009 2010 2010 2011 2011 MiniPrint: Offset printing press for business forms, with variable format cassettes. CS 50 / FC 50: Offset unit produced for Harris Graphics USA VS 1050: Offset unit produced for Harris Graphics USA with plough folders, sheeters, fan folders, high pile deliveries. VS 650: Offset printing press for business forms and commercial printing VS 760: the fi rst Offset mid-web press (760 mm. print width) for the fl exible packaging market (BOPP 38 micron). Flower : the most successful fl exographic print unit in the history of the narrow web industry. An inspiring technology for press manufacturers. The secret of success for hundreds of label printers worldwide. E-Combat : the fi rst true full-servo press in the label industry (servo print and impression cylinders) READY Drop-in silk screen and hot stamping heads movable on each Flower heads. A GIDUE idea, today a standard. Unipro : the fi rst mid-web press with print sleeves followed in 2005 by the *Athena press line. Leonardo, the fi rst Offset print unit for the label industry using printing sleeves with metal side bearers. Intelligent Combat : the fi rst GIDUE fl exo press with fully automatic print pressure adjustment Nemo : the fi rst HD Camera operated register system with PC integrated navigation system. Galileo : the compact rotary offset press for the label industry. Intelligent Camera : the fi rst truly universal register control operated by HD Cameras for each print unit HD Carton: heavy duty converting for cardboard, with interchangeable die-cutting sections on platform. Xpannd : the only Lean Offset press in the label market, with press-integrated cassette storage and handling. HD Hot Stamping: hot stamping tools to a fraction of the costs (150 Euro per plate) and set-up time to less than 15 min. Universal Platform : interchangeable Process Heads movable on a platform, in a Lean working environment Master : the universal fl exographic press, designed for any substrate in the labels and packaging industry. Snow Ball : the revolution in waste matrix stripping. After 60 years, a movable rewinding shaft increase waste rewinding speeds from 30% up to 200% more than traditional waste fi xed shaft rewinding systems. Digital Flexo : print set-up and production are digitally operated by the press, with digital wastes and quality. Offset Cube : Compact Offset Cube featuring the Mini-Cassette Super-Lean technology. Nuova GIDUE S.r.l. manufactures printing and converting machines for the labels and packaging industry in Florence (Italy). Flower Mini Cassette Snow Ball Mission We provide technologies which are easy to handle and stay robust during the years. We look for the profi tability of Labels and Packaging converters. Quality wins. VS 760 Intelligent Combat Athena Master 630 7
[ Tauruslab.net ] Nuova GIDUE S.r.l. Headquarters Via Cassia 67, 50029 Tavarnuzze (FI) - Italy Tel. +39 055 2374745 Fax +39 055 2020019 Turate Branch (Sales & Services) Via Matteotti 10, 22078 Turate (CO) - Italy Tel. +39 02 9668181 Fax +39 02 96681842 www.gidue.com - e-mail: sales@gidue.com