LETRON 500 integrates all interfaces in one unit, providing the connections with telecom and VoIP. Analog PSTN port and SIP trunk for trunk used, Analog Line and SIP Line port for extensions used. With easy dialing plan and setting, you can maintain the original dialing behavior, either intercom call or E.164 dialing by connecting to the existing telecom environment. In conjunction with the multiple barring system, the communication cost can be significantly lower. With 2, 4, 8,16 analog ports /module configurations, the LETRON 500 is highly scalable. When extension numbers are set, the LETRON 500 is a complete IP-PBX system. Moreover the SIP Trunks can be flexibly and easily upgraded through the Internet upon user s demand. Provides great flexibility for system planners to decide what scale of models he/she needs. LETRON 500 built in Registrar and Proxy Server. Any SIP device that complies with SIP Protocols RFC-3261, RFC-2833 such as SIP Gateway, SIP IP Phone, SIP Soft phone and SIP Wi-Fi Phone can register to the LETRON 500 as an extension, with the full functions of an extension on that network. Without a Public IP address, the user may construct a network with a Private IP behind the NAT. The LETRON 500 Media Relay function allows SIP devices to penetrate the NAT. The SIP user is then able to make calls without configuring any NAT setting. LETRON 500 provides Multiple Device on One Number Applications. It shares one extension number for multiple telephone devices. System will ring the device by specific order when the incoming call is received. With Notebook and GSM mobile phone, the mobile user won t miss any important calls. 1
LETRON 500 integrates with MOSA ASD products (Conference Bridge,Broadcast Server,ACD Server), and provides the end user various functions and applications. The SIP Trunk of LETRON 500 can register to IP Telecom with value-added service. Not only reducing the cost of communication, but also makes the best fit for communications. For businesses only one LETRON 500 is required to provide all IP-PBX functions. Integrating Analog Trunk and Analog Line of traditional PBX and interface of VoIP, LETRON 500 maintains the original dialing behavior. Supporting standard SIP 2
devices, (such as SIP phone, SIP gateway, SIP soft-phone, Wi-Fi phone) can be configured as extensions of LETRON 500 and are no longer restricted to the region. All outbound calls can make SIP calls using IP Operator service and reduce the cost of communication, raising enterprise efficiency. The Mobile Office configuration is for mobile users who cannot miss important calls and communications. The user can set up the incoming call ringing priority, such as Wi-Fi phone Notebook (soft-phone) Desktop extension GSM mobile phone. After set-up, there's no need to make changes while in use. Any incoming calls will ring first to Wi-Fi phone, then notebook s soft-phone. If the Wi-Fi phone and notebook are not on-line, the calls will be transferred to desktop extensions. If no one answers the desktop extension call, it will be transferred to GSM/PHS mobile phone automatically. Wherever the user is, he won t miss any calls. 3
Integrating with traditional PBX The traditional PBX user can add the LETRON 500 and significantly enhance the VoIP functions of his system. With LETRON 500 installed SIP outbound calls can be made, and SIP connections expanded. Traditional PSTN incoming calls can be transferred to remote mobile extensions, such as Wi-Fi phone and soft-phone. While keeping the original PBX system, a range or IP-PBX functions can be added. 4
Multiple sites For multiple site business users LETRON 500 connects multiple sites as a single virtual PBX. All extensions can be used as company extensions, and can use other sites'lines to make calls via internet. Incoming calls, can be directed or transferred to any remote site of extensions. Though offices are established in different places, it's as if they are operating at one location. YODANET connects the world s LETRON 500 devices becoming a huge IP network, and the communication cost is free! 5
LETRON 500 built-in DISA provides aut omatic at tendant which plays recorded messages and transf ers incoming calls. The message can be recorded through telephone or down-loaded from FTP. Any extension of the LETRON 500 can be assigned as an operator. All incoming PSTN call from each site can reach the operator by dialing operator code 0. LETRON 500 suppor ts Inbound Call, Outbound Call, and Transit Call. You can even dial from PSTN into LETRON 500 and transit calls through a SIP trunk to a SIP number. Both Analog Lines and SIP Lines of LETRON 500 support call transfer, call par k, and consult transfer. The extension can be transfer to any extensions of local or remote site. The incoming call to a trunk or an extension can be forwarded to any following destinations: 1. Any Analog Line or SIP Line of local LETRON 500 2. Any Analog Line or SIP Line of remote LETRON 500 3. PSTN number ( local, long distance or mobile phone number) Any outbound call from LETRON 500 can be selected through the cheapest routing. This feature isolates incoming calls to the proper area and enables an extension to pick-up a call from the same pick-up group. 6
There are barring function in the system, any analog or SIP Line can be assigned different barr ing class for call restriction. 100 abbreviated numbers can be configured in each LETRON 500 for speed dialing. Through t he RS-232 port or TCP/IP protocol, the call detail record (CDR) can be collected locally or centr alized for bett er call accounting management The Analog Line port of LETRON 500 can connect to a FAX machine to provide cross-network fax service. LETRON 500 doesn t need to use a public IP address. It can work with private IP. The Analog Line port can hardware bypass to analog trunk ports when the power is off. With ASD (Application Service Device), we can provide add-value applicat ions such as VoI P Conference, VoIP Broadcasting, etc. 1. Complete Managem ent Function: Telephone set, Console and Web management. Users can use telephone or console to manage LETRON 500. They can also use telnet or web to manage LETRON 500 from remote sites. 2. Easy soft ware update LETRON 500 built-in FTP server and provide FTP function to update the firmware. New firmware can also be up-dated via the web. 7
Analog Voice Port Interface LETRO N 503: 1FXO+ 2FXS LETRO N 503-FS: 1FXO + 2FXS LETRO N 504A: 2FXO+ 2FXS LETRO N 504B: 4FXS LETRO N 504C: 4FXO LETRO N 504D: 1FXO+ 3FXS LETRON 508A: 4FXO + 4 FXS LETRON 508B: 8 FXS LETRO N 508C: 8FXO LETRON 516A: 8FXO + 8FXS LETRO N 516B: 16FXS LETRO N 516C: 16FXO LETRO N 516D: 4FXO + 12FXS LETRO N 516E: 12FXO + 4FXS SIP Trunk Interface LETRON 503: Default Value 0 (Maximum 24) LETRO N 503-FS: Deault Value 24 LETRON 504: Default Value 0 (Maximum 24) LETRON 508: Default Value 0 (Maximum 24) LETRON 516: Default Value 0 (Maximum 24) SIP Line Interface LETRON 503: Default Value 4 (Maximum 72) LETRO N 503-FS: Deault Value 72 LETRON 504: Default Value 8 (Maximum 72) LETRON 508A/B/C: Default Value 12 (Maximum 72) LETRON 516A/B/C/D/E: Default Value 24(Maximum 72) Concurrent Call LETRO N 503: 90 LETRO N 503-FS: 90 LETRO N 504A/B/C/D: 36 LETRO N 508A/B/C: 48 LETRO N 516A/B/C/D/E: 48 FXS Interface Loop Start FXO Interface Loop Start, 2 Wires Connectors LETRO N 503/FS :RJ-11 LETRO N 504A/B/C/D : RJ11 8
Silence Suppression Echo Cancellation Jitt er Buffer Gain Control Packet Time Transport Protocol Call Control Protocol St andard SIP Pr ot ocol LETRO N 508A/B/C :I DC connector LETRO N 516A/B/C/D/E :I DC connector VAD, CNG G. 165/G. 168 16ms Adaptive Jit ter Buffer Managem ent In/ Out +/- 6db G.711 20 ms/g.729 40 ms/g.723 60 ms RTP Propr ietary, SIP RFC-3261, RFC-2833 Number of Ports Interfaces Connectors IP Address Support 2 X Ethernet Ports 10BASE-T/ 100BASE-TX Auto-negotiation RJ-45 Connectors Static IP / DHCP Private IP Management Tools Soft ware Up-grade Web Br owser Phone set Syst em Console Telnet SNMP* FTP, Web Maximum Networking 100 Maximum Extension Analog 1600 SIP 7200 Maximum Trunk Analog 1600 SIP 2400 Power External Power Adaptor Voltage: 100VAC ~ 240VAC. Frequency: 50/60Hz. Power Consumption LETRO N 503/FS: 10W LETRO N 504A/B/C/D: 12W LETRO N 508A/B/C: 70W LETRO N 516A/B/C/D/E: 70W Dimension LETRON 503/FS: 190mm x 25mm x 110 mm 9
LETRON 504A/B/C/D: 172mm x 35mm x 176 mm LETRON 508A/B/C: 440mm x 66mm x 254 mm LETRON 516A/B/C/D/E: 440mm x 66mm x 254 mm Working Environment Operating Temperature: 0 to 50C. Storage Temperature: -10 to 70C EMI Certification FCC part 15 Class B. CE Mark PTT Regulation FCC part 68, JATE*, CTR21* (*in pr ogress) Safety cul, CCC*, CB* stands for SIP Line stands for SIP Trunk LETRON 503 SIP IP-PBX with 1 FXO + 2 FXS + 4 SL LETRON 503 FS SIP IP-PBX with 1 FXO + 2 FXS + 72 SL + 24 ST LETRON 504A SIP IP-PBX with 2 FXO + 2 FXS + 8 SL LETRON 504B SIP IP-PBX with 4 FXS + 8 SL LETRON 504C SIP IP-PBX with 4 FXO + 8 SL LETRON 504D SIP IP-PBX with 1 FXO + 3 FXS + 8 SL LETRON 508A LETRON 508B LETRON 508C LETRON 516A LETRON 516B LETRON 516C LETRON 516D LETRON 516E SIP IP-PBX with 4 FXO + 4 FXS + 12 SL SIP IP-PBX with 8 FXS + 12 SL SIP IP-PBX with 8 FXO + 12 SL SIP IP-PBX with 8 FXO + 8 FXS + 24 SL SIP IP-PBX with 16 FXS + 24 SL SIP IP-PBX with 16 FXO + 24 SL SIP IP-PBX with 4 FXO + 12 FXS + 24 SL SIP IP-PBX with 12 FXO + 4 FXS + 24 SL MSW100 SmartPad Option 2F,No.3-1 Industry East Road IX, Science Based Industrial Park, Hsinchu, Taiwan Tel. +886-3-5632323, +886-2-25812155 Fax.+886-3-5636420, +886-2-25812156 10
Email. sales@yoda.com.tw Http:// www.yoda.com.tw All of the specifications are subject to change without further notices. 11