NATIONAL CERTIFICATES (VOCATIONAL) SUBJECT GUIDELINES PLUMBING NQF Level 2 April 2008
PLUMBING - LEVEL 2 CONTENTS INTRODUCTION 1. DURATION AND TUITION TIME 2. SUBJECT LEVEL FOCUS 3. ASSESSMENT REQUIREMENTS 3.1 Internal assessment 3.2 External assessment 4. WEIGHTED VALUES OF TOPICS 5. CALCULATION OF FINAL MARK 6. PASS REQUIREMENTS 7. SUBJECT AND LEARNING OUTCOMES 7.1 Introduction to plumbing 7.2 Plumbing principles and Code of Practice 7.3 Materials, tools and equipment used in the plumbing industry 7.4 Pipe assembly for water reticulation 7.5 Cutting and joining of metal 7.6 Set out below-ground drainage systems 8. RESOURCE NEEDS FOR THE TEACHING OF PLUMBING - LEVEL 2 8.1 Physical resources 8.2 Human resources 8.3 Other resources
INTRODUCTION A. What is Plumbing about? Plumbing is the skilled trade of working with pipes, tubing and plumbing fixtures for water systems and the drainage of waste. Plumbing also refers to a system of pipes and fixtures installed in a building for the distribution of drinking water and the removal of waterborne wastes. In Plumbing, students acquire the skills to install sanitary fittings, water piping to buildings and sewerage systems. B. Why is Plumbing important in the Construction learning programme? The plumbing industry is a basic and substantial part of every developed economy due to the need for clean water, and proper collection and transport of wastes. Most building structures require plumbing. Students interested in careers in the construction industry must be well informed of plumbing principles and requirements. C. The link between Plumbing and the Critical and Developmental Outcomes In Plumbing, students develop the skill to work in teams and to identify and solve problems. Students also learn to understand and contribute to the environment by meaningfully interpreting information which they come across. Students have the opportunity to develop an understanding of the world as a set of related systems by recognising the impact that the different environments can have on the construction industry. Students explore educational and career opportunities in the industry and in important building services D. Factors that contribute to achieving Plumbing Thorough preparation for teaching and learning activities An environment conducive to teaching and learning through effective learner support, motivation, commitment and a positive attitude An interest in plumbing Exposure to construction environments. 2 Department of Education
1 DURATION AND TUITION TIME This is a one-year instructional programme comprising 200 teaching and learning hours. The subject may be offered on a part-time basis provided the student meets all the assessment requirements. Students with special education needs (LSEN) must be catered for in a way that eliminates barriers to learning. 2 SUBJECT LEVEL FOCUS Explain equipment, tools and machinery used in Plumbing. Identify and use machines, tools, methods and processes to produce different Plumbing products. Explain and apply relevant health and safety procedures and practices. 3 ASSESSMENT REQUIREMENTS 3.1 Internal assessment (50 percent) 3.1.1 Theoretical component The theoretical component forms 40 percent of the internal assessment mark. Internal assessment of the theoretical component in Plumbing Level 2 takes the form of observation, class questions, group work, informal group competitions with rewards, individual discussions with students, class, topic and semester tests and internal examinations. Lecturers can observe students when marking exercises from the previous day and asking class questions. Assignments, case studies and tests can be completed at the end of a topic. Tests and internal examinations must form part of the internal assessment. 3.1.2 Practical component The practical component forms 60 percent of the internal assessment mark. Practical components include applications and exercises. All practical components must be indicated in a Portfolio of Evidence (PoE). Internal assessment of the practical component in Plumbing Level 2 takes the form of assignments, practical exercises, case studies and practical examinations in a simulated business environment. Students may complete practical exercises daily. Assignments and case studies can be completed at the end of a topic. Practical examinations can form part of internal practical assessment. Some examples of practical assessments include, but are not limited to: A. Presentations (lectures, demonstrations, group discussions and activities, practical work, observation, role-play, independent activity, synthesis and evaluation) B. Exhibitions by students C. Visits undertaken by students based on a structured assignment task D. Research E. Task performance in a Structured Environment Department of Education 3
Definition of the term Structured Environment For the purposes of assessment, Structured Environment refers to a simulated workplace or workshop environment. Activities in the simulated workplace or environment must be documented in a logbook with a clear listing of the competencies to be assessed. The following information must be contained in the logbook: Nature of department or environment in which practical component was achieved Activities in the environment with which to achieve the Time spent on activities Signature of facilitator or supervisor and student For the logbook to be regarded as valid evidence, it must be signed by an officially assigned supervisor. Evidence in practical assessments All evidence pertaining to evaluation of practical work must be reflected in the student s PoE. Assessment instruments used for the purpose of conducting these assessments must be part of the evidence contained in the PoE. 3.1.3 Processing of internal assessment mark for the year A year mark out of 100 is calculated by adding the marks of the theoretical component and the practical component of the internal continuous assessment (ICASS). 3.1.4 Moderation of internal assessment mark Internal assessment is subjected to internal and external moderation procedures as set out in the National Examinations Policy for FET College Programmes. 3.2 External assessment (50 percent) A national examination is conducted annually in October or November by means of a paper(s) set and moderated externally. A practical component will also be assessed. External assessment details and procedures are set out in the Assessment Guidelines: Plumbing Level 2 4 WEIGHTED VALUES OF TOPICS TOPICS WEIGHTED VALUE 1. Introduction to Plumbing 15% 2. Plumbing principles and Code of Practice 15% 3. Materials, tools and equipment used in the plumbing industry 10% 4. Pipe assembly for water reticulation 25% 5. Cutting and joining of metals 10% 6. Set out below-ground drainage systems 25% TOTAL 100 5 CALCULATION OF FINAL MARK Internal assessment mark: Student s mark/100 x 50 = a mark out of 50 (a) Examination mark: Student s mark/100 x 50 = a mark out of 50 (b) Final mark: (a) + (b) = a mark out of 100 All marks are systematically processed and accurately recorded to be available as hard copy evidence for, amongst others, reporting, moderation and verification purposes. 6 PASS REQUIREMENTS A student must obtain at least 50 percent in ICASS and 50 percent in the examination to achieve a pass in this subject. 4 Department of Education
7 SUBJECT AND LEARNING OUTCOMES On completion of Plumbing Level 2, the student should have covered the following topics: Topic 1: Topic 2: Topic 3: Topic 4: Topic 5: Topic 6: Introduction to Plumbing Plumbing principles and Code of Practice Materials, tools and equipment used in the plumbing industry Pipe assembly for water reticulation Cutting and joining of metals Set out below-ground drainage systems 7.1 Topic 1: Introduction to Plumbing 7.1.1 Subject Outcome 1: Describe the history of plumbing Briefly describe the history of plumbing. 7.1.2 Subject Outcome 2: Describe water treatment Describe the procedure of water treatment Describe the procedure of sewerage treatment. 7.1.3 Subject Outcome 3: Conduct orientation into the plumbing industry Describe the role of a plumber in the construction industry Communicate with relevant trades in the construction industry. 7.2 Topic 2: Plumbing principles and code of practice 7.2.1 Subject Outcome 1: Describe and apply related water calculations Describe water sources, flow principles and pressure Calculate flow, pressure and loss. 7.2.2 Subject Outcome 2: Understand Code of Practice for plumbing Explain the correct installation of water supply to buildings as prescribed in the Code of Practice SABS 10252 Part 1 (Installation of water supply to buildings) Explain the correct installation of drainage to buildings as prescribed in the Code of Practice SABS 10252 Part 2 (Installation of drainage to buildings) and the National Building Regulations SABS 10400 Part P Drainage to Buildings. Department of Education 5
7.3 Topic 3: Materials, tools and equipment used in the plumbing industry 7.3.1 Subject Outcome 3: Identify and describe uses of plumbing tool and materials Identify plumbing tools and equipment and describe their uses. Identify and describe plumbing pipe work and related fittings, and indicate their uses. Identify and describe plumbing sanitary ware fixtures and fittings and indicate their uses. Identify and describe ancillary plumbing materials and consumables and explain their uses. Identify, categorise and calculate basic plumbing materials 7.3.2 Subject Outcome 2: Erect, use and dismantle access equipment Erect, use and dismantle scaffolding Use ladders safely and effectively Work safely on roofs 7.4 Topic 4: Pipe assembly for water reticulation 7.4.1 Subject Outcome 1: Assemble metal pipe work Explain and demonstrate how to cut, thread and assemble GMS pipe work Explain and demonstrate how to cut, bend and assemble copper pipe work 7.4.2 Subject Outcome 2: Assemble non-metal pipe work Explain and demonstrate how to cut, bend and assemble multilayer pipe work Explain and demonstrate how to cut, bend and assemble mono layer pipe work 7.5 Topic 5: Cutting and joining metals 7.5.1 Subject Outcome 1: Mark out, cut and join sheet metal Mark out and cut sheet metal Join sheet metal 7.5.2 Subject Outcome 2: Weld basic components Arc weld basic components Braze basic components 7.6 Topic 6: Set out below-ground drainage systems 7.6.1 Subject Outcome 1: Describe drainage systems Describe below-ground drainage systems Read drainage layouts Design basic drainage layouts 6 Department of Education
7.6.2 Subject Outcome 2: Set out and determine levels Set out levels using basic levelling devices 8 RESOURCE NEEDS FOR THE TEACHING OF PLUMBING - LEVEL 2 8.1 Physical resources Classroom and suitable venue for practical assessments Teaching aids and pre-designed models and structures Work tables, work area, chairs and chalkboard Overhead projector 8.2 Human resources The lecturer should have an acceptable NQF level qualification in Building and Civil Construction and should preferably be a registered assessor. The lecturer should be committed to continually improving and expanding his or her knowledge and skills. 8.3 Other resources Toolbox and tools for each student Equipment and tools: 1. Plumbing materials 17. Drain testing machine 2. Nibblers - lock former 18. Trestles 3. Scaffolding 19. Ladders 4. Arc Welder 20. Dumpy level and boning rods 5. Drain rods 21. Jetting machine (drain cleaning) 6. Pipe threading machine (electrical) 22. Gas bottles 7. Soldering irons 23. Gloves 8. Goggles 24. Overalls 9. Safety boots 25. Masks and ear plugs 10. Helmets 26. Torches 11. Breathing aids 27. Gumboots 12. Signage 28. Pipes 13. Fittings 29. Consumables 14. Pre-cast concrete rings 30. Prefabricated manholes 15. Hand tools 31. Power tools 16. Generator Department of Education 7