UNITOR ULTRASONIC cleaning
ULTRASONIC machines Unitor Ultrasonic cleaning machines are specially designed for use in the ship s engine room to remove even the most stubborn dirt. Compared with traditional cleaning methods use of Ultrasonic cleaning units is resulting in reduced manual work, reduced consumption of hazardous chemicals and improved cleaning performance without damaging the items to be cleaned. Use of Ultrasonic units combined with suitable detergents makes it particularly useful for cleaning complex machine parts like injection nozzles, fuel and pump parts, inlet and exhaust valves etc. Particularly suited are cleaning fine mesh fuel and lube oil filters which can be cleaned without damaging the fine filter elements. All units delivered complete with bottom drain, basket, lid and stainless steel frame for secure fastening to the floor. PRODUCT RANGE Complete Ultrasonic machines Unitor Ultrasonic T-1040/HM 230V AC Unitor Ultrasonic T-1040/HM 110V AC Unitor Ultrasonic T-1060/HM 230V AC Unitor Ultrasonic T-1100/HM 230V AC TECHNICAL DATA Ultrasonic T-1040/HM 230V- AC 110 V-AC Ultrasonic T-1060/HM 230V- AC Ultrasonic T-1100/HM 230V- AC External measurement L x W x D Internal measurement L x W x D Capacity Material Weight Heating Connected power HF-continuous output Operating frequency Drainage Timer 550 x 350 x 760 mm 500 x 300 x 450 mm 65 ltr. Stainless steel CrNi 1.4571 43 kg 1600 W Adjustable 30-85 C 1950 W 400 W 40 khz Ball valve 0-120 min., Continuous operation 720 x 620 x 760 mm 600 x 500 x 500 mm 150 ltr. Stainless steel CrNi 1.4571 65 kg 2000 W Adjustable 30-85 C 2800 W 800 W 40 khz Ball valve 0-120 min., Continuous operation 865 x 545 x 760 mm 820 x 500 x 500 mm 205 ltr. Stainless steel CrNi 1.4571 71 kg 2400 W Adjustable 30-85 C 3400 W 1000 W 35 khz Ball valve 0-120 min., Continuous operation
Features and benefits Robust units, material which comes into contact with cleaning solution is made of stainless steel Thermostatically adjustable heating Timer function Designed for use with water-based as well as solvent based cleaning chemicals Easy drainage Mounted on stainless steel frame for secure fastening to the deck Removes deposits, soil and fouling completely without additional manual work and without damaging the item to be cleaned Ideal partner for cleaning fuel and lube oil filters Low or hardly noticeable audible noise Allows use of chemicals with less environmental exposure Time saving Ordering information Product No. Unitor Ultrasonic T-1040 / HM 230V AC 664 607818 Unitor Ultrasonic T-1040 / HM 110V AC 664 607813 Unitor Ultrasonic T-1060 / HM 230V AC 664 651729 Unitor Ultrasonic T-1100 / HM 230V AC 664 659847 All units delivered complete with stainless steel lid and basket. The T-1060 and T-1100 are available in 400V 50Hz and 440V 60Hz on request. A specially developed cleaning agent for ultrasonic use, Unitor USC is recommended, but the Unitor Ultrasonic unites may also be used together with the following Unitor Products; Metal Brite, Enviroclean, Coldwash HD and Aquabreak PX. MULTI-FREQUENCY generators Ultrasonic generators with multiple frequency technology are specially designed units converting electrical energy into ultrasonic signals. Connected with Immersible Transducers ultrasonic signals from generator will be converted into corresponding mechanical vibrations able to scrub off surfaces immersed in a liquid medium. Two selectable ultrasonic frequencies means adjustable energy transferred into the cleaning solution depending on deposits and items to be cleaned. Multi frequency generators MF 600 MF 1000 MF 2000 MF 3000 MF 4000 External measurement L x W x D (mm) Ultrasonic power Operating voltage Frequency Switching 320 x 440 x 180 600 W 50/60 Hz 320 x 440 x 180 1000 W 50/60 Hz 530 x 620 x 230 2000 W 50/60 Hz 530 x 620 x 230 3000 W 50/60 Hz 530 x 620 x 230 4000 W 50/60 Hz Power consumption Output power regulation. Degassing function Max. cleaning volume 2.7 A 60 ltr. 4.4 A 100 ltr. 8.8 A 200 ltr. 14.0 A 300 ltr. 18.1 A 400 ltr.
Features and benefits Multiple frequency. The lower frequency is used for coarse requirements and the higher frequency is used for finer cleaning needs Timer function Adjustable power selection Equal power output at all frequencies Degassing function to optimize ultrasonic cleaning Sweep function uniform sonic distribution at all frequencies Flexible one system for many uses Ordering information Product No. MF 600 / 600 Watt 664 659714 MF 1000 / 1000 Watt 664 659730 MF 2000 / 2000 Watt 664 659748 MF 3000 / 3000 Watt 664 659755 MF 4000 / 4000 Watt 664 659763
Immersible Transducers are units converting an electrical ultrasonic signal from the Generator into corresponding mechanical vibrations. When transducers vibrate pressure waves will be sent into the cleaning tank to scrub of surfaces immersed in a liquid medium. IMMERSIBLE transducers Our range of Immersible Ultrasonic Transducers are designed for installation in new or existing cleaning tanks. Depending on size of the tanks and the ultrasonic energy level needed, single or multiple units can be used. Use of Immersible Transducers offer the ability to upgrade or custom fit any tank to improve the speed and effectiveness of the washing process. Immersible ultrasonic transducers MF-TS 600 MF-TS 1000 MF-TS 1500 MF-TS 2000 Marine Generator Subby 1, IP68* Size (mm) Ultrasonic power Operating voltage 50/60 Hz Frequency Switching Max. cleaning volume 415 x 265 x 100 600 W 60 ltr. 415 x 325 x 100 1000 W 100 ltr. 415 x 325 x 100 1500 W 150 ltr. 415 x 325 x 100 2000 W 200 ltr. 195 x 575 x 112 1000 W 25 khz 100 ltr. *) Package containing generator and immersible transducer Features and benefits Robust units made of stainless steel Can be used as single or multiple installation For installations in new or existing steel tanks Compatible with water-based as well as solvent based cleaning chemicals Removes deposits, soil and fouling completely without additional manual work and without damaging the item to be cleaned Ideal partner for cleaning fuel lube oil filters, air cooler and heat exchangers Environmental friendly (use of safer chemicals, lower concentrations) Ordering information Product No. MF-TS 600 600 Watt 664 659798 MF-TS 1000 1000 Watt 664 659797 MF-TS 1500 1500 Watt 664 659805 MF-TS 2000 2000 Watt 664 659821 Miscellaneous: Subby 1 Marine Generator IP68 664 659862
Unitor ASA Mail: P.O.Box 300, Skøyen, N-0213 Oslo, Norway, Office: Drammensveien 175, 0277 Oslo, Norway, Tel: +47 22 13 14 15, Fax: +47 22 13 45 00, Email: web@unitor.com, Internet: www.unitor.com ID No. 811169 Designed and produced by voice reklame. Printer: Colorado - Poland. 02.06. 3K. Country of origin Norway. The Unitor name and logo device are registered trademarks of Unitor ASA. Copyright Unitor ASA 2006.