NEW HMIs for Oil & Gas Applications in hazardous areas
R. STAHL HMIs for the Oil & Gas Industry Applications è Mobile Rig Floor PCs è Fixed Mounted Rig Floor PCs è HMIs for Driller's Cabins è HMIs for Wireline Applications è Widescreen Displays for Container Applications è HMIs for Tank Farm Applications Certificates è ATEX Zone 1, 2, 21, 22 è IECEx Zone 1, 2, 21, 22 è UL, CSA, KGS, CKT, GOST-R (TR), INMETRO and DNV / LR certificates for ships (FPSOs, tankers, etc.), depending on product type 2 www.stahl-hmi.de
R. STAHL HMI Innovations SERIES 200 The First 7" Widescreen Display for Zone 1 / 2 Our new SERIES 200 features state-of-the-art technology, and comes with high-performance CPU, capacitive touch screen, and Windows Embedded Compact 7 operating system. A hardened glass layer adds enhanced protection to the 7" widescreen display. With its compact, fully rugged design, seawater resistance and IP66 standard, the SERIES 200 is the ideal solution for applications in harsh and demanding environments worldwide, e.g. tank farms and oil rigs, and is suitable for permanent operation at ambient temperatures between -40 C up to +65 C. NEW Sunlight-Readable (SR) Displays direct sunlight Our innovative sunlight-readable (SR) displays ensure best, glare-free readability even in bright ambient light conditions, and are the ideal solution for outdoor applications, e.g. on oil rigs. Compared to other standard sunlight-viewable displays, this display type with its innovative polarization filter system substantially reduces disturbing reflections and glare, thus ensuring best image quality and readability. User-Friendly, Explosion-Protected Widescreen Displays, Standard Keyboard / Mouse Up until now, standard operator interfaces in container workstations have included multi-monitor configurations, or in case of failure only small HMIs of limited functionality. But this problem now belongs to the past: our explosion-protected widescreen KVM system solution ensures reliable and continuous operation even in case of critical situations. And despite display sizes of up to 24", and 1920 x 1200 resolution, our widescreen displays stand out for their compact design. Ready-to-Run Full Clients (Panel PCs) with Pre-Installed Operating System Our Full Clients (Panel PCs) are ready-to-run pre-configured, ex-factory, with a closed, multilingual operating system (Windows XP / Windows Embedded / Windows 7 Ultimate, etc.). Designed as OPEN HMI, the systems are open for all types of software applications. Thin Clients with REMOTE HMI FIRMWARE R. STAHL Thin Clients are fitted with a special firmware that protects the HMI system against external manipulations, permanently monitors the entire data communications, and switches to another server in the event of failure. Moreover, the REMOTE HMI FIRMWARE simplifies IP address management, and the overall configuration management. WWW.EXICOM.DE 3
Why R. STAHL HMIs? R. STAHL HMI offers the widest range of display sizes (7" up to 24"WU), and technology solutions Full Clients (Panel PCs), Thin Clients, KVM systems, and various operator interfaces that are also available in modern widescreen formats. All our HMIs are extremely rugged, and specifically designed to ensure fail-safe, reliable 24/7 long-term operation. In addition to our professional HMI hardware, we also offer pre-configured operating systems and high performance firmware to ensure secure data communications and usability. R. STAHL HMIs = State-of-the-art hardware + Intelligent firmware VARIOUS DISPLAY SIZES Highlights BACKUP/RECOVERY USB STICK 7" UP TO 24" SUNLIGHT-READABLE DISPLAY INNOVATIVE POLARIZATION FILTER SYSTEM MODULARLY REPAIRABLE è Sunlight-readable (SR) display with innovative polarization filter technology ensures best display readability è Wide range of display sizes, from 7" up to 24" Full HD / 24"WU OPERATING SYSTEMS READY-TO-RUN è Specially protected touch screen that can be operated while wearing gloves è Available as Full Clients (Panel PCs), Thin Clients, KVM systems, and operator interfaces (different display sizes available) è Maintenance-free design, easily accessible connectors è Modular design allows for easy and cost-effective repair è Lightweight 15" HMI (< 22.6 kg) WIDE TEMPERATURE RANGE è Wide temperature range, from -40 C up to +50 C è WLAN / RFID solutions -40 C +50 C è Customized enclosures and front plates è International certificates, and DNV / LR certificates for tankers / FPSOs, etc. INTERNATIONAL CERTIFICATES è Easy-to-use, multi-monitor configuration with explosion-protected widescreen displays, keyboard and mouse for container applications è Customized hardware solutions (CAN bus, joystick, etc.) 4 www.stahl-hmi.de
VARIOUS DISPLAY SIZES BACKUP/RECOVERY USB STICK Highlights Software 7" UP TO 24" SUNLIGHT-READABLE DISPLAY OPERATING SYSTEMS READY-TO-RUN è Full Client (Panel PC) with Windows 7 Ultimate / Embedded Standard 2009, etc. - Pre-configured, ready-to-run operating system INNOVATIVE POLARIZATION FILTER SYSTEM - Open for all types of software applications - Multilingual (26 languages) operating system MODULARLY REPAIRABLE - Touch screen support with mouse / keyboard emulation in real-time and at log-in - Write-protected boot partition in Windows Embedded Standard 2009 - Setup wizard for fast and easy system setup è Thin Client with R. STAHL REMOTE HMI FIRMWARE for maximum security and permanent data WIDE communications TEMPERATURE RANGE control - Closed system design provides maximum security against manipulations - Defined access via OSD menu or system console - TCP / UDP port filtering -40 Cfor all incoming +50 Cconnections - Redundant fallback network connection - Password protection for OSD entries INTERNATIONAL CERTIFICATES - Integrated network diagnostics - Watchdog function for data communications - Configuration management (import / export) - Touch screen support with mouse and keyboard emulation in 26 languages è Backup / Recovery USB Stick è Software Support Center VARIOUS DISPLAY SIZES BACKUP/RECOVERY USB STICK 7" UP TO 24" SUNLIGHT-READABLE DISPLAY OPERATING SYSTEMS WWW.EXICOM.DE 5 READY-TO-RUN
Mobile Rig Floor HMIs ATEX Zone 1 / IECEx Zone 1 The Rig Floor PCs of the EXICOM series allow operators to permanently monitor and control all drilling operations, and to quickly respond to any critical event that might occur. Our Rig Floor PCs are fitted with an innovative sunlight-readable (SR) display with intelligent polarization filter technology that substantially reduces disturbing reflections and glare, thus ensuring best readability even in bright sunlight. Our Rig Floor HMIs with sunlight-readable (SR) display stand out due to their lightweight design (< 22.6 kg) and user-friendliness, and are available either as Full Client (Panel PC), or Thin Client system. è Sunlight-readable (SR) display with innovative polarization filter technology ensures best display readability è Lightweight 15" HMI (< 22.6 kg) è Customized enclosures and front plates è Quickly ready for use thanks to easily accessible connectors è Rig Floor PC ambient temperature range between -20 C up to +55 C è Full Client (Panel PC) with Windows 7 Ultimate / Embedded Standard 2009, etc. è Thin Client with special REMOTE HMI FIRMWARE ensures maximum security and permanent data communications control è Optional WLAN, Backup / Recovery USB stick 6 www.stahl-hmi.de
The right HMI technology solutions for your applications: SERIES 400 Full Client (Panel PC) Systems 10.4" 15" SR 19" ATOM 1.6 GHz, 1 / 2 GB RAM, 4 / SSD 16 GB (Solid State Disk), 100 GB SHD Operation -20 C up to +55 C Operating Systems Multilingual Windows Embedded Standard 2009, Windows 7 Ultimate, optional QNX & Linux SERIES 500 Thin Client Systems 15" SR 19" GEODE / ATOM processor Operation -20 C up to +55 C (permanent operation +50 C) Security & Firmware REMOTE HMI FIRMWARE based on Windows Embedded Standard 2009 / Backup / Recovery USB stick R. STAHL HMI Innovations New Sunlight-Readable Display Technology Our innovative sunlight-readable (SR) displays ensure best, glare-free readability even in bright ambient light conditions, and are the ideal solution for outdoor applications, e.g. on oil rigs. Compared to other standard sunlight-viewable displays, this display type with its innovative polarization filter system substantially reduces disturbing reflections and glare, thus ensuring best image quality and readability. polarization filter package direct sunlight display light display glass panel WWW.EXICOM.DE 7
Fixed Mounted Rig Floor HMIs ATEX Zone 1 / IECEx Zone 1 For all fixed mounted Rig Floor PCs, we have developed an enclosure type that allows the operator to flexibly adjust the monitor position, both vertically and horizontally. The enclosure is fitted with the latest sunlight-readable (SR) display with intelligent polarization filter technology that reduces disturbing reflections and effects of bright ambient light. The operator is able to permanently monitor and control all drilling operations, and to quickly respond to any critical event that might occur. è Compact, lightweight enclosure, easy installation è Optimum readability, vertically and horizontally adjustable è Innovative sunlight-readable (SR) display for glare-free readability è 19" available as high brightness display with sun shade / customized enclosure è Full Client (Panel PC) with Windows 7 Ultimate, Embedded Standard, etc. è Thin Client with R. STAHL REMOTE HMI FIRMWARE for maximum security and permanent data communications control è Backup / Recovery USB stick for high failure safety 8 www.stahl-hmi.de
The right HMI technology solutions for your applications: SERIES 200 7" Widescreen Display Display 7" widescreen, TFT colour display, 16.2 m colours, 15:9, 800 x 480 WVGA, sunlight-readable display, 500 cd/m 2 (contrast 600:1), capacitive touch screen as standard Cortex A8 processor, 800 MHz, 512 MB RAM, 1GB Flash, + 512 MB SSD (expandable up to 64 GB) Operation -40 C up to 65 C 1 x RS-422 / -485 Ex e, 10/10BaseTX Ex e, or 100BaseFX Ex op is, USB: 1 x Ex ia, 1 x Ex e to host (different for Zone 2). Optional: WLAN 802.11b/g 11/54 Mbps, barcode, RFID reader: RS-422 via reader box Operating Systems Windows Embedded Compact 7, or optional SPSPlus Runtime: open operating system for integration of third-party software, SPSPlusWIN engineering software (compatible with FALCON / EAGLE series) (More operating systems upon request) SERIES 400 Full Client (Panel PC) Systems 10.4" 15" SR 19" 22" 24" 24"WU ATOM 1.6 GHz, 1 / 2 GB RAM, 4 / 16 GB (Solid State Disk), 100 GB SHD Operation -20 C up to +55 C Operating Systems Multilingual Windows Embedded Standard 2009, Windows 7 Ultimate, optional QNX & Linux SERIES 500 Thin Client Systems 15" SR 19" 22" 24" 24"WU GEODE / ATOM processor Operation -20 C up to +55 C (permanent operation +50 C) Security & Firmware REMOTE HMI FIRMWARE based on Windows Embedded Standard 2009 / Backup / Recovery USB stick WWW.EXICOM.DE 9
HMIs for Driller s Cabins ATEX Zone 1 / IECEx Zone 1 Our new sunlight-readable (SR) displays are ideally suited to monitor and control all operations in the driller s cabin. Its intelligent polarization filter system substantially reduces disturbing reflections and glare, thus providing optimized screen readability. The operator in the driller s cabin has everything under control, and is able to quickly respond to any critical event that might occur during drilling operations. è Innovative 15" sunlight-readable (SR) display for optimum readability / monitoring è Wide display range from 15" up to 24" è All displays available as panel-mount module è Innovative joystick design for optimum cursor control è Customized communications solutions (CAN bus, etc.) R. STAHL HMI Innovations Customized Joystick Solutions Our team of highly skilled engineers and technicians also develops customized joystick solutions suitable for use in hazardous areas thus providing the operator in the driller s cabin with customized, precise cursor control. 10 www.stahl-hmi.de
The right HMI technology solutions for your applications: SERIES 400 Full Client (Panel PC) Systems 10.4" 15" SR 19" 22" 24" 24"WU ATOM 1.6 GHz, 1 / 2 GB RAM, 4 / 16 GB (Solid State Disk), 100 GB SHD Operation -20 C up to +55 C Operating Systems Multilingual Windows Embedded Standard 2009, Windows 7 Ultimate, optional QNX & Linux SERIES 500 Thin Client Systems 15" SR 19" 22" 24" 24"WU GEODE / ATOM processor Operation -20 C up to +55 C (permanent operation +50 C) Security & Firmware REMOTE HMI FIRMWARE based on Windows Embedded Standard 2009 / Backup / Recovery USB stick SERIES 600 KVM Systems 19" 22" 24" 24"WU KVM box data transmission: Copper up to 150 m (standard) / 500 m optional Fiber optic multimode up to 500 m / single mode up to 10 km Operation -20 C up to +60 C (permanent operation +50 C) Operation with heater -30 C up to +50 C Data: Ex e, or fiber optic Ex op is, USB Ex ia, USB Ex ia, RS-232 / RS-422 / RS-485 Ex e, reader box for card reader / barcode scanner, FBAS Ex audio line in / out Ex e, WLAN via USB Ex e, KVM box WWW.EXICOM.DE 11
HMIs for Wireline Applications ATEX Zone 1 / IECEx Zone 1 In wireline applications, permanent monitoring and control of the cable routing in the drilling hole is of particular importance any disturbing reflections and glare could affect the monitoring process. The innovative sunlight-readable (SR) display with its intelligent polarization filter technology substantially reduces reflections and glare. The operator has everything under control and is able to quickly respond to any critical event that might occur. è Innovative 15" sunlight-readable (SR) display for optimum readability / monitoring è Wide display range from 15" up to 24" è All displays available as panel-mount module è Customized enclosures è Customized communications solutions (CAN bus, etc.) è Full Client (Panel PC) with Windows Embedded 7 Ultimate, or Embedded Standard 2009, etc. è Thin Client with R. STAHL REMOTE HMI FIRMWARE for maximum security, and permanent data communications control 12 www.stahl-hmi.de
The right HMI technology solutions for your applications: SERIES 400 Full Client (Panel PC) Systems 10.4" 15" SR 19" 22" 24" 24"WU ATOM 1.6 GHz, 1 / 2 GB RAM, 4 / 16 GB (Solid State Disk), 100 GB SHD Operation -20 C up to +55 C Operating Systems Multilingual Windows Embedded Standard 2009, Windows 7 Ultimate, optional QNX & Linux SERIES 500 Thin Client Systems 15" SR 19" 22" 24" 24"WU GEODE / ATOM processor Operation -20 C up to +55 C (permanent operation +50 C) Security & Firmware REMOTE HMI FIRMWARE based on Windows Embedded Standard 2009 / Backup / Recovery USB stick R. STAHL HMI InnovationS HMIs with Pre-Installed Operating System All Panel PCs are ready-to-run worldwide, with pre-installed, ex-factory, multilingual Windows Embedded Standard 2009, or Windows Ultimate operating system (QNY, Linux optional) a time-consuming installation of drivers or operating systems is no longer necessary. All pre-installed operating systems provide enhanced protection against external manipulations. In the rare case of a system failure, the backup / recovery USB stick allows to immediately restore the system to the original state. WWW.EXICOM.DE 13
Widescreen Displays for Container Applications R. STAHL HMI is the only provider of widescreen displays suitable for container applications in hazardous areas, Zone 1. Even in the event of an explosive atmosphere, they ensure enhanced operator comfort, reliable operation, and optimum process visualization. The high brightness widescreen displays also allow for a dual- or multi-monitor configuration, and are ideally suited for the comprehensive monitoring of operations, analyses, and applications, such as the Workover Control System. The explosion-protected keyboard and mouse modules meet ergonomics standards (EN ISO 9241-400), and help to minimize fatigue while working in the container. è Widescreen displays, or multi-monitor walls for large-scale visualization è 19" up to 24" Full HD / 24"WU (1920 x 1200) è Explosion-protected, ergonomic keyboard / mouse for enhanced operator comfort è Full Client, Thin Client, and KVM system technologies available è Full Client (Panel PC) with Windows 7 Ultimate, or Embedded Standard 2009, etc. è Thin Clients with R. STAHL REMOTE HMI FIRMWARE for maximum system security, and permanent data communications control R. STAHL HMI InnovationS Explosion-Protected Widescreen Displays, Ergonomic Keyboard / Mouse in "Office Style To ensure fast and reliable process monitoring and control in container environments, we provide explosion-protected monitor solutions, mouse and keyboard modules that meet ergonomics standards, thus ensuring optimum operator comfort. Both keyboard and mouse are ready-to-use, an operator training for industrial input devices is not required. 14 www.stahl-hmi.de
The right HMI technology solutions for your applications: SERIES 400 Full Client (Panel PC) Systems 22" 24" 24"WU ATOM 1.6 GHz, 1 / 2 GB RAM, 4 / 16 GB (Solid State Disk), 100 GB SHD Operation -20 C up to +55 C Operating Systems Multilingual Windows Embedded Standard 2009, Windows 7 Ultimate, optional QNX & Linux SERIES 500 Thin Client Systems 22" 24" 24"WU GEODE / ATOM processor Operation -20 C up to +55 C (permanent operation +50 C) Security & Firmware REMOTE HMI FIRMWARE based on Windows Embedded Standard 2009 / Backup / Recovery USB stick SERIES 600 KVM Systems 22" 24" 24"WU KVM box data transmission: Copper up to 150 m (standard) / 500 m optional Fiber optic multimode up to 500 m / single mode up to 10 km Operation -20 C up to +60 C (permanent operation +50 C) Operation with heater -30 C up to +50 C Data: Ex e, or fiber optic Ex op is, USB Ex ia, USB Ex ia, RS-232 / RS-422 / RS-485 Ex e, reader box for card reader / barcode scanner, FBAS Ex audio line in / out Ex e, WLAN via USB Ex e, KVM box WWW.EXICOM.DE 15
HMIs for Tank Farm & Refinery Applications R. STAHL HMI offers the full range of operator stations suitable for applications in tank farm environments, loading and unloading sites. We provide our customers with hazardous area HMI solutions that best suit their particular needs. Our SERIES 400 (Full Clients / Panel PCs) with pre-installed operating system is ready to run all types of software applications. Our EAGLE operator interfaces are designed as closed systems with proprietary visualization software and real-time operating system. And our new SERIES 200 sets new standards it is as easy to use as a smartphone, and equipped with modern communication interfaces. Highly rugged, and compatible with the EAGLE series, the new SERIES 200 is suitable for applications at temperatures ranging between -40 C up to +65 C. All systems can optionally be equipped with RFID card readers or barcode scanners. è Full Clients (Panel PCs), EAGLEs, or the new SERIES 200 the ideal operator station for all types of applications è All HMIs can be equipped with RFID card readers è Modern data transmission technologies (LAN, WLAN, serial) è Suitable for worldwide applications in temperatures between -40 C up to 65 C R. STAHL HMI InnovationS Various RFID Solutions SECURITY and ACCESS CONTROL are essential in loading and unloading facilities. For user/operator authentication, direct coupling of the RFID reader to our operator terminals is possible. Due to the fact that also transponders have to be certified for use in hazardous areas, we also provide the corresponding accessories, such as badges and key rings. 16 www.stahl-hmi.de
The right HMI technology solutions for your applications: SERIE 200 7" Widescreen Display Display 7" widescreen, TFT colour display, 16.2 m colours, 15:9, 800 x 480 WVGA, sunlight-readable display, 500 cd/m 2 (contrast 600:1), capacitive touch screen as standard Cortex A8 processor, 800 MHz, 512 MB RAM, 1GB Flash, + 512 MB SSD (expandable up to 64 GB) Operation -40 C up to 65 C 1 x RS-422 / -485 Ex e, 10/10BaseTX Ex e, or 100BaseFX Ex op is, USB: 1 x Ex ia, 1 x Ex e to host (different for Zone 2). Optional: WLAN 802.11b/g 11/54 Mbps, barcode, RFID reader: RS-422 via reader box Operating Systems Windows Embedded Compact 7, or optional SPSPlus Runtime: open operating system for integration of third-party software, SPSPlusWIN engineering software (compatible with FALCON / EAGLE series) (More operating systems upon request) SERIES 300 EAGLE Operator Interface 10" 15" SR Operation -20 C up to +55 C Operation with heater -30 C up to + 55 C Operation with heater, enclosure insulation and protection screen -40 C up to +55 C Display with touch screen and function keys, external keyboard Ex i 105 keys, processor LX800 266MHz, RAM 256 MB, closed operating system, multilingual and global support Data: Ex e or fiber optic Ex op is, USB Ex ia, USB Ex e, RS-232 / RS-422 / RS-485 Ex e, RSi interface for card reader, barcorde scanner, SERIES 400 Full Client (Panel PC) Systems 10.4" 15" SR 19" 22" 24" 24"WU ATOM 1.6 GHz, 1 / 2 GB RAM, 4 / 16 GB (Solid State Disk), 100 GB SHD Operation -20 C up to +55 C Operating Systems Multilingual Windows Embedded Standard 2009, Windows 7 Ultimate, optional QNX & Linux WWW.EXICOM.DE 17
R. STAHL HMI Portfolio for the Oil & Gas Industry Software / Firmware è Pre-installed, multilingual operating systems è Proprietary, real-time operating systems è REMOTE HMI FIRMWARE for network structures è SPSPlusWIN project engineering software è 10" to 24"WU displays available as panel-mount module è Standard keyboards è Customized keyboards è Backup/recovery USB stick è RFID solutions è Barcode scanners Standard Enclosures / Panel-Mount Modules Customized Enclosures 18 www.stahl-hmi.de
Production Our highly specialized production facilities, and a team of highly skilled engineers and manufacturing experts enable us to provide our customers with both standard and customized HMI solutions. Highest quality standards, professional production methods, and short communication paths are the basis for manufacturing human-machine interfaces suitable for reliable and permanent operation in harsh and demanding environments. / Software Support Centre Should you have any questions or problems, do not hesitate to contact our highly skilled Support Center team. Customer Service & Consulting Rig floor, refinery, or tank farm applications require special expertise. Our team of highly skilled experts is focused on the design and development of HMI solutions that best suit your site-specific requirements, including software and accessories. Oil & Gas Sales Experts Please contact our experts directly at: sales@stahl-hmi.de +49 (0) 221 59 808-53 WWW.EXICOM.DE 19
R. STAHL HMI Systems GmbH Im Gewerbegebiet Pesch 14 D-50767 Cologne, Germany Phone: +49 (0) 221 59 808-200 Fax: +49 (0) 221 59 808-260 E-mail: office@stahl-hmi.de www.stahl-hmi.de www.exicom.de All rights reserved subject to technical changes. All trademarks are acknowledged as the property of their respective owners even if not specified. ID 213419 / 2014-02 / EN Printed in Germany