Welcome to this introduction into a true business class network solution for you and your clients This solution has been designed, by integrators, for integrators. We look forward to producing an ever evolving device that will grow and adapt to the quickly evolving automation industry. Thank you The Team at CIS
The CIS-80 has a fully featured routing operating system capable of dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by this powerful OS. Atheros 600MHz 74K MIPS network processor 1000mW dual chain 2.4Ghz 802.11bgn wireless AP 128MB RAM Five Gigabit LAN ports Five Fast Ethernet LAN ports SFP cage (SFP module not included!) RJ45 serial port Micro-USB port SFP Active LAN ETH1 is the Wan Port Power supply.
Congratulations on receiving your new CIS VPN Router This router has been designed to offer you a seamless secure solution for integration all of your client s integration requirements. Default IP:192.168.10.1 User Name:cis Password:integration Trivia: Because this router has an IP address of 192.168.10.1, you can plug this into an existing network and run them both at one time.
ETH-1 has been built as the WAN port. Shortly after connecting the routers WAN port you will see the IP address assigned from your modem appear. 1) Select Addresses 2)External IP address Eg. 192.168.6.110 Trivia: This router is set up as a Class C Network 192.168.10.0/24 /24 is the same as 255.255.255.0 This router is equipped with a 1000mw Wi-Fi System
We have preconfigured this CIS router so that the only configuration required is to adjust the SSID and to set the password 1) Select Wireless 2) Double click the status line to adjust the wireless SSID Trivia: This router is scalable. Guest networks or office networks can be added to ensure security to critical systems The default wireless SSID is set to Wireless Preconfig
Change this to your clients SSID. The channel frequency has been preset. 2) Select Apply to enable the new SSID 1) Create the new SSID here Access the Security Profiles to give your client a custom password.
1) Select Wireless 2) Select Security Profiles 3) Double click to adjust Wi-Fi password
We have set the default password to password as a reminder to create a secure network for your client Create and record your new password here and apply 2) Select Apply to finish 1) Enter new passwords in both key locations
Under the Interfaces you will see the 10 interfaces on the CIS Router Please note the traffic on the attached port. Port 1-5 are 10/100/1000. Ports 6-10 are 10/100 1) Select Interface 2) WAN port 1 3) Double click for status
Here you will notice a higher level of information relating to traffic on the CIS Router ports. View WAN status here. Select Apply to exit
Select the Addresses to reveal the leases tab on the CIS Router 1) Select Addresses 2) Select Leases
The default IP Pool for dynamic address has been set from 192.168.10.100-192.168.10.150. 1) Select DHCP Server 2) Double click to set set static IP s
Create static IP address for devices that are connected to your control system, camera systems, or power management systems that you wish to maintain contact with. 1) Select Make Static then Close
We encourage you to create static IP address in the range of 192.168.10.200-192.168.10.254 We encourage you to create a standardized location for devices on your network 2) Select Apply to finish 1) Set new IP
Our On-line store provides a secure mechanism for the additional great services like those listed below. http://www.custom-integration-solutions.com/shop/ This service will give you secure Wi-Fi Access using our generic Hotspot. Setup time is typically under 30 minutes. This can require password authentication upon request. Need a second network for that office or cottage. This will provide you with an entirely separate network that is completely segregated from your primary network. This is a great solution for home offices, guest suites and more. Need additional VPN credentials for your office application? Give every staff member their own set of credential so you can control access.