Software Oeriew ADLINK deliers robust software support for their comprehensie line of cards in a ariety of form factors: USB, PCI Express, PCI, CompactPCI, and PXI. ADLINK offers drier for mainstream Windows and Linux Operating Systems, and proide arious SDK support for thirdparty applications including Visual Studio, LabVIEW and MATLAB. In addition, ADLINK also proides componentware for measurement and HMI, and readytorun Application, like Data Logger software. ADLINK Software Supporting Microsoft Windows Frameworks Visual Studio.NET LabVIEW MATLAB Ready to Run Applications ActieX Control &.NET Assembly VI for LabVIEW Toolbox for MATLAB Bench DASK Low Leel API DKDASK, PCISDASK, WDDASK, UDDASK, DSADASK Windows XP, and Windows 7/ x64, x6 edition ADLINK Cards in Various Form Factor: PCI, PCI Express, CompactPCI, USB, PXI (Generalpurpose s, Digital I/O, Analog Output, Performance, HighSpeed Digital I/O, Digitizers) * National Instruments and LabVIEW are trademarks of National Instrument, Inc. * MATLAB is a trademark of The MathWorks, Inc. 1 www.adlinktech.com
1 PXI/PXIe Multiple OS Support For different operating systems, we design API with the natie programming logic, so users can simply install the drier without modifying the program when migrating between different operating systems. ADLINK proides driers to support Windows 000/XP, Windows 7/ (x6 and x64) and Mainstream Linux distributions: Ubuntu, Fedora. And also proides legacy drier/sdk for legacy ISAbus Cards. Modular Instruments 3 Windows 000/XP Windows 7/ x64/x6 Linux Ubuntu Fedora SDK & Componentware ADLINK proide arious SDK to its comprehensie line of data acquisition products. Pilot is a taskoriented Software Deelopment Kit, include ActieX Controls/.NET Assembly, Express VI and Polymorphic VI for LabVIEW and Toolbox for MATLAB. For Low Leel API, we also proide DASK Natie Libraries for different product lines. Bench is the componentware for deeloping HMI application. 4 GPIB & Bus Expansion 5 Pilot : ADLINK Taskoriented SDK for Windows Bench : 3Bit ActieX Controls for Measurement and SCADA/HMI Vision 6 Thirdparty Software Support For LabVIEW users, ADLINK proide Express VI and Polymorphic VI libraries. For MATLAB users, ADLINK proides MATLAB Data Acquisition Toolbox Adapter for all Cards. In addition, ADLINK is a Math Works Connections Program partner for long term product support. Motion Control 7 Realtime Distributed I/O Express VI and Polymorphic VIs for LabVIEW MATLAB Toolbox for ADLINK Cards PAC Ready to Run Application 9 ADLINK proides arious readytorun applications, like ADLogger, a Data logger Software; Master, a configuration tool for data acquisition deices requiring no programming, and specific readytouse utilities for USB by UTest and for Dynamic Signal Acquisition Modules by DSAUtility. Remote I/O 10 Communications 11 ADLogger : ConfigurationBased Master : ConfigurationBased UTest : Full function testing Fanless Embedded Computers Data Logger for ADLINK Cards Deice Manager for ADLINK Cards of ADLINK USB www.adlinktech.com
Steps to Get ADLINK Products Ready Install the Card / Install System Manager Module Install the Drier for Configure and Test Open the Box Windows ADLINK Cards / Modules Install ADLINK Product Package Insert the ADLINK Allinone CD Insert the ADLINK Allinone CD PXI Platform ADLINK Cards / Modules Click Drier Installation to install ADLINK DASK Driers Click Master for installation Fanless Embedded Computer PCISDASK ADLINK PCI/PCIe/cPCI Series Cards Industrial Computer ADLINK Allinone CD DKDASK ADLINK /e/pxi000 Series Cards WDDASK ADLINK HighSpeed Digitizers UDDASK ADLINK USB Modules DSADASK ADLINK Dynamic Signal Acquisition Modules NOTES: *Please download Windows driers and API Library from the corresponding product page at the ADLINK website. *Linux driers and API Library are also aailable. For more information, please isit http://www.adlinktech.com/maps/linux_daq.html 3 www.adlinktech.com
1 PXI/PXIe Modular Instruments 3 ADLINK proides the key concepts of data acquisition and aims to help you get started quickly. The diagram takes you through the eight steps of drier installing, system manager configuring and testing, SDK & readytorun applications installing of your data acquisition application. Using these eight steps will reduce your hardware setup and software deelopment time for your data acquisition applications! 4 GPIB & Bus Expansion Reboot System Install SDK Install Readytorun Application Ready for Deelopment 5 Vision 6 Motion Control For Visual Studio.NET DASK API & Pilot For DSA Module DSAUtility 7 Realtime Distributed I/O Reboot the System For MATLAB MTLB For USB UTest PAC 9 For LabVIEW Pilot Remote I/O For ADLogger 10 Pilot Taskoriented SDK for ADLINK Cards MTLB MATLAB Data Acquisition Toolbox Adapter for ADLINK Cards DSAUtility Utility for ADLINK Dynamic Signal Acquisition Modules UTest Utility for USB Modules ADLogger Configurationbased Data Logger NOTE: Please download the SDK and readytorun applications from the corresponding product page at the ADLINK website. Communications 11 Fanless Embedded Computers www.adlinktech.com 4
Wide Selection of Modular Instruments Oeriew From entryleel to highend, data acquisition to digital input/output, ADLINK proides a diersity of modular instruments with marketleading price/performance ratio, for bigger and better measurement and automation systems. Now highspeed digitizer, switching, simultaneous data acquisition, highdensity multifunction data acquisition, analog output, digital multimeter, and arbitrary waeform generator categories are all aailable. HighSpeed Digitizers Digitizers offer quick and precise input signal acquisition and are widely used in IC testing, ideo testing, automatic test equipment, radar and sonar testing, among others. Digitizers optimized for automated test take adantage of the highthroughput PXI and PXI Express buses to lower test times, and offer picosecondleel synchronization between modules. ADLINK proides full spectrum modules including the PXIe94 CH 14bit 100 MS/s digitizer, the PCI/PXI9X6 Series with 4CH 16bit and 10/0/40 MS/s, the PCIe95 with 00 MS/s 14bit CH performance, and many other choices. Dynamic Signal Analyzer A dynamic signal analyzer proides highly accurate measurements and analysis widely used in audio testing, acoustic measurements, enironmental noise testing, ibration analysis, NVH measurement, machine condition monitoring, and rotating machinery ealuation. ADLINK s PCI/PXI957 features a high resolution of 4 bits, two analog inputs with sampling rates up to 43 ks/s and two analog outputs with update rates up to 16 ks/s. The PCI/PXI957 offers the flexibility needed to create a wide ariety of automatic test systems with optimal costperformance. Switches Switches are widely used in automatic test equipment (ATE), process control systems, data acquisition systems, etc. ADLINK offers seeral types of switches to meet your application requirements. ADLINK switches include 16CH generalpurpose relays, 4CH scanners or multiplexers, and a 3 crosspoint twowire matrix. Arbitrary Waeform Generators Arbitrary waeforms generate userdefined signals in automation and measurement application. The TE501, a single channel PXIbased AWG, proides a highspeed waeform to stimulate signal distortion, power line cycle dropouts, ideo signals, and power supply transience. 5 www.adlinktech.com
1 PXI/PXIe Digitizer Applications For quantifying and analyzing physical energy Leeraging processing power and highresolution display of PC PCbased oscilloscope Defining custom measurement functions by software, such as spectrum analysis, frequency domain analysis, rise/fall time of signals, and more Modular Instruments 3 Sampling Rate Distributed Temperature Sensing Video Signal PCIe95 00 MS/s 14Bit CH High Speed Digitizers PCIe/ PXIe94 00 MS/s 14Bit 1CH High Speed Digitizers P 11 P 1 4 GPIB & Bus Expansion PXIe94 100 MS/s 14Bit CH High Density Digitizers P 9 5 Radar & LiDAR Power Supply Unit Testing Military & Education PXI9x6 10/0/40 MS/s 16Bit 4CH Digitizers PCI/PXI90 65 MS/s 14Bit CH PCI/PXI Digitizers P 13 P 15 Vision 6 Power & Energy Sound & Vibration PCI91/910 0 MS/s 10/1Bit 4CH PCI Digitizers PXIe959 4Bit 19 ks/s CH HighResolution DSA P 16 P 19 Motion Control 7 Realtime Distributed I/O PCI/PXI957 4Bit 43 ks/s HighResolution DSA P 17 1Bit 14Bit 16Bit 4Bit Resolution PAC Digitizers.s. s 9 How to make the choice between a Data Acquisition () board and a HighSpeed Digitizer? The difference between a digitizer and standard is the sampling rate and the bandwidth. A digitizer can extend its sampling rate from MS/s to GS/s grade, and the bandwidth can also extend from 10 MHz to GHz. Additionally, the input impedance or the module s memory capacity can proide more options for use in different application enironments. Gien the features of what are referred to as high accuracy signals, only a digitizer with high sampling rate and high bandwidth can successfully accomplish the task. Sampling Rate Remote I/O 10 Communications Sampling rate from MS/s to GS/s Bandwidth ranges from 10 MHz to GHz Input impedance : 50 Ω, 75 Ω, high impedance Onboard memory support (51 MB, 1 GB, ) Bit 14Bit 4Bit Resolution 11 Fanless Embedded Computers www.adlinktech.com 6
Selection Guide Digitizer Form Sampling Input Onboard Digital Module Factor Channels Rate Resolution Memory Input Name Page PCI PCIe PXI PXIe 4CH CH CH 1CH 4CH CH CH 1CH 40 MS/s 0 MS/s 10 MS/s 65 MS/s (External) 60 MS/s (Internal) 00 MS/s 40 MS/s 0 MS/s 10 MS/s 65 MS/s (External) 60 MS/s (Internal) 100 MS/s 00 MS/s 16Bit 1Bit 10Bit 16Bit 14Bit 16Bit 14Bit 51 MB 1 k samples 3 k samples 51 MB 1/51 MB GB 51 MB 1/51 MB 51 MB 3CH CH PCI946 PCI96 PCI91A PCI91 PCI910 PCI916 PCI90 PCIe95 PCIe94 PXI946 PXI96 PXI916 PXI90 PXIe94 PXIe94 13 13 16 16 16 13 15 11 1 13 13 13 15 9 1 Dynamic Signal Analyzer Form Factor Analog Input Channels Analog Input Max. Sampling Rates (S/s) AD Resolution (bits) FIFO Size (sample) Voltage Output Channels Analog Output Update Rate (S/s) DA Resolution (bits) Digital IO Digital IO Module Name Page 4+4 (4ch PCI PCI PXI PXIe load cell inputs & 4ch general purpose AD) Up to 30 ks/s 43 ks/s 19 ks/s 4 56 K 4096 k 4096 k 5 K 16 ks/s 16 4 DI, DO (Isolated) PCI954 PCI957 PXI957 PXIe959 0 17 19 7 www.adlinktech.com
1 PXI/PXIe Software Selection Guide Products Page Windows OS Information Software Compatibillity Software Recommendations (Note1) Linux (Note) LabVIEW (Note3) Visual Studio.NET (Note4) MATLAB (Note5) Bench Master AD Logger Others Modular Instruments 3 Digitizers High Resolution PCI910 16 PCISDASK PCISDASK/X PCI91 16 PCI/PXI90 15 PCI/PXI916 13 WDDASK PCI/PXI96 13 Pilot MTLB Pilot PCI/PXI946 13 WDDASK WDDASK/X PCIe/PXIe94 PXIe94 PCIe95 PCI954 1 9 11 0 PCISDASK PCISDASK/X PCI/PXI957 17 WDDASK DSADASK Pilot MTLB Pilot PXIe959 19 Note. (1) Windows Support for Windows 000/XP, and Windows 7/ x64/x6 () Linux Support for Ubuntu 1.04.1 LTS, Fedora Core 17, and OpenSuSe 1.1 (3) Compatible with LabVIEW.0 and aboe 4) Compatible with Visual Studio.NET 005/00, DASK for API, and Pilot for Componentware (5) MATLAB Data Acquisition Toolbox. (and aboe) compliant High Speed Arbitrary Waeform Generator & PXI Switch Modules Model Name TE501 Model Name PXI7901 PXI791 PXI7931 DSA Utility 4 GPIB & Bus Expansion 5 Vision 6 Motion Control 7 Realtime Distributed I/O Analog Output DAC Resolution Update Rate Output Range Output Impedance Standard Waeform Arbitrary Waeform Memory Sample Clock Modulation Page Number 1CH 14Bit 50 S/s to 100 MS/s 0 mvpp to Vpp into 50 Ω load 50 Ω Sine, Triangle, Square, Pulse, Ramp, Sinc, Gaussian Pulse, Exponential Decay/ Rise Pulse,Noise, DC 1 M points FM, FSK, Ramped FSK, Sweep 1 Description No. of Channel Relay Type Max. Switching Current Max. Switching Voltage Max. Switching Power Max. Carrying Current Failure Rate Contact Resistance Page Number 16 SPDT (1 Form C) 3 A @ 0 VDC 0 VDC, 50 VAC 50 VA, 60 W 3 A 10 µa @ 10 mvdc 150 mω max. 3 Twowire Multiplexer 4 (twowire) 4 (onewire) DPDT ( Form C) A @ 30 VDC 0 VDC, 15 VAC 50 VA, 60 W A 10 µa @ 10 mvdc 100 mω max. 4 4groups x4 Twowire Matrix 3 (twowire) DPDT ( Form C) A @ 30 VDC 0 VDC, 15 VAC 50 VA, 60 W 3 A 10 µa @ 10 mvdc 150 mω max. 4 PAC 9 Remote I/O 10 Generalpurpose Communications 11 Fanless Embedded Computers www.adlinktech.com
PXIe94 CH 14Bit 100 MS/s HighSpeed PXI Express Digitizer Introduction The ADLINK PXIe94 is a CH 14bit 100 MS/s digitizer for high frequency and wide dynamic range signals with an input frequency up to 100 MHz. The 100 MHz bandwidth analog input with 50Ω impedance receies ±0. V or ± V high speed signals. With a PCI Express bus interface and ample onboard acquisition memory up to 51 MB, the PXIe94 easily manages simultaneous CH data streaming. Equipped with high speed and high linearity 14bit A/D conerters, the PXIe94 is ideal for applications requiring highspeed data acquisition, such as power module testing, LIDAR testing, and ideo signal analysis. PXI Express specification Re. 1.0 compliant Up to 100 MS/s sampling rate simultaneously analog inputs High resolution 14bit ADC Up to 100 MHz bandwidth for analog input 51 MB onboard storage memory Programmable input oltage range of ±0. V or ± V ScatterGather DMA data transfer for high speed data streaming One external digital trigger input Full autocalibration Windows XP/7/, x64/x6 Linux Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Highlights Flexible Use Options The PXIe94 proides a flexible input range from ±0.V to ±V, software selectable 50Ω or 1MΩ input impedance, a wide ariety of triggering options, and tight synchronization capability, all maximizing conenience of use. High Density Simultaneous CH Data Streaming Benefiting from PXIe architecture, the PXIe94 easily manages simultaneous CH data streaming. Users can synchronize multiple PXIe94 digitizers to mount a test system proiding up to 64 channels in a single 9slot PXI Express chassis. Extra Buffering The PXIe94 proides builtin memory up to 51 MB for massie data storage, enabling users to extend acquisition for preset durations. Analog Input Number of channels: singleended Input impedance: 50Ω or 1MΩ, software selectable Input Coupling: AC or DC, software selectable Input signal range: ±0. V or ± V Oeroltage protection: ±5 V ADC resolution: 14 bits, 1 in 1634 Crosstalk: < 0 db from DC to 1 MHz, for all input ranges 3 db bandwidth: 100MHz Offset error: ±1 mv Gain error: ± 0.5% System noise: Spectral Characteristics Sampling rate: 100MS/s SINAD: 65 db SNR: 66 db THD: 7 db ENOB: 10.5 bit SFDR: 74 db Equipped with ADLINK PXES590 PXIe chassis and PXIe94 modules, high density testing system with up to 64 channels can be implemented. Note: For PXES590 details, please refer to pages 113. Typical alues are measured using 1 MHz sine wae input at 100 MS/s with amplitude at 1dB of full scale on a ± V range. Acquired data lengths are in 64k points, calculated with Hanning window FFT. 9 www.adlinktech.com
Digitizers 1 PXI/PXIe Trigger Trigger Source Software External digital trigger Analog trigger from CH0 ~ CH7 PXI_STAR PXI trigger bus [0..7] PXIe_DSTARB Trigger Modes Posttrigger Pretrigger Middle trigger Delay trigger External Digital Trigger Input Source: Front panel SMB connector Configurable threshold: 0. mv to 3.3 V, default 1.67 V Maximum input oerload: 0.5 V to +5.5 V Trigger polarity: rising or falling edge Pulse width: 0 ns minimum Timebase Sample clock source Internal: onboard clock (oscillator) External: PXI_CLK10 or PXIe_CLK100 Timebase frequency: 100 MHz Sampling rate: 100 MS/s to 105.9 S/s Internal timebase accuracy: < ±5 ppm Data Storage and Transfer 51 MB onboard memory, shared among the eight analog inputs (64 MB/per channel) ScatterGather DMA data transfer Onboard Reference +.5 V onboard reference oltage < 3.0 ppm/ C reference temperature drift 15 minutes recommended warmup General I/O Connector: SMB x for analog inputs SMB x 1 for external digital input Dimensions (not including connectors): 160 (W) x 100 (H) mm (6.4 x 3.9 ) Bus Interface: PCI Express gen 1 x4 Ambient Temperature (Operational): 0 C to 55 C (3 F to 131 F) Ambient Temperature (Storage): 0 C to 0 C (4 F to 176 F) Relatie Humidity: 10% to 90%, noncondensing Power consumption: Certifications Power Rail Standby current (ma) Full load (ma) +3.3 V 5350 5900 +1 V 470 500 EMC/EMI: CE, FCC Class A TRG IN CH0 CH1 CH CH3 CH4 CH5 CH6 CH7 IO connector definition PXIe94 CH 14Bit 100 MS/s HighSpeed PXI Express Digitizer Modular Instruments 3 4 GPIB & Bus Expansion 5 Vision 6 Motion Control 7 Realtime Distributed I/O PAC 9 Remote I/O 10 Communications 11 Fanless Embedded Computers www.adlinktech.com 10
PCIe95 CH 14Bit 00 MS/s HighSpeed PCI Express Digitizer Digitizers Introduction The ADLINK PCIe95 is a CH 14bit 00 MS/s digitizer for high frequency and wide dynamic range signals with an input frequency up to 100 MHz. The 100 MHz bandwidth analog input with 50Ω impedance is designed to receie ±0. V or ± V high speed signals. With a PCI Express bus interface and ample onboard acquisition memory up to GB, the PCIe95 easily manages simultaneous CH data streaming. With high speed and high linearity 14bit A/D conerters and high stable onboard reference, the PCIe95 proides both high accuracy and high dynamic performance, making it ideal for applications requiring highspeed data acquisition, such as optical fiber and LIDAR testing, and ideo signal analysis. PCI Express specification Re..0 compliant Up to 00 MS/s sampling rate simultaneously analog inputs High resolution 14bit ADC Up to 100 MHz bandwidth for analog input GB onboard storage memory Programmable input oltage range of ±0. V or ± V Scattergather DMA data transfer for high speed data streaming One external digital trigger input and one external trigger output One external clock input Full autocalibration Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Analog Input Number of Channels: singleended channel Input Coupling: AC or DC, software selectable Oeroltage Protection: ±5 V Offset Error: ±1 mv AC coupling cutoff frequency: 13 Hz 3 db Bandwidth: 100MHz Input Impedance: 50Ω or 1MΩ, software selectable Input Signal Range: ±0. V or ± V ADC Resolution: 14 bits, 1 in 1634 Gain Error: ±0.5% of input Input Impedance: 50Ω or 1MΩ, software selectable Trigger Trigger Source Software External digital SSI (System Synchronized Interface) Trigger Modes Posttrigger Pretrigger Middle trigger Delay trigger External Digital Trigger Input 5 V, 3.3 V TTL compatibility Rising edge or falling edge trigger condition, software programmable 0 ns minimum pulse width Timebase Sample clock sources Internal: onboard oscillator External: CLK IN (front panel SMA connector), SSI 00 MHz timebase frequency Data Storage and Transfer GB onboard memory, shared among the two analog inputs ScatterGather DMA data transfer Onboard Reference +5V and +.5V onboard reference oltage < 3.0 ppm/ C reference temperature drift 15 minutes recommended warmup General I/O Connector SMA x for analog inputs SMA x 1 for external trigger input SMA x 1 for external trigger output SMA x 1 for external clock input Dimensions (not including connectors): 167.64 (W) x 106.6 (H) mm (6.53 x 4.16 ) Bus Interface: PCI Express Gen x4 Ambient Temperature (Operational): 0 C to 55 C (3 F to 131 F) Ambient Temperature (Storage): 0 C to 0 C (4 F to 176 F) Relatie Humidity: 10% to 90%, noncondensing Certifications EMC/EMI: CE, FCC Class A PCIe95 CH 14Bit 00 MS/s HighSpeed PCI Express Digitizer 11 www.adlinktech.com
PCIe/PXIe94 1CH 14Bit 00 MS/s HighSpeed PCI Express /PXI Express Digitizers Introduction Digitizers 1 PXI/PXIe Modular Instruments PCIe94 PXIe94 The ADLINK PCIe/PXIe94 is a 1CH 14bit 00 MS/s digitizer designed for applications such as LIDAR testing, optical fiber testing, and radar signal acquisition. The 100 MHz bandwidth analog input with 50 ohm impedance is designed to receie ±1 V high speed signal. With this simplified frontend design and high stable onboard reference, the PCIe/PXIe94 not only proides high accuracy measurement results but also deliers high dynamic performance. For applications that require data to be acquired and transferred in real time, the PCIe/PXIe94 utilizes the PCI Express x4 bus as its interface. When signals are conerted from analog to digital data, data transfer to host system memory is continuous, enabled by the PCI Express increased bandwidth. 3 4 GPIB & Bus Expansion PXI Express specification Re. 1.0 compliant (PXIe94) Up to 00 MS/s sampling rate High resolution 14bit ADC ±1 V Input range with 50 Ω input impedance and DC couple Up to 100 MHz bandwidth for analog input High speed PCI Express Gen 1 x4 bus interface ScatterGather DMA data transfer for high speed data streaming One external digital trigger input One digital trigger output to stimulate external instruments Full autocalibration Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Analog Input Number of Channels: One singleended channel Input Impedance: 50 Ω ± % Input Coupling: DC Input Signal Range: ±1.0 V Oeroltage Protection: ±5 V ADC Resolution: 14 bits, 1 in 1634 Offset Error: ±1 mv Gain Error: ±0.5% of input 3dB Bandwidth: 100 MHz Timebase Sample Clock Source: onboard oscillator Timebase Frequency: 00 MHz Auto Calibration Reference Voltage: +5.000 V Reference Temperature drift: < 5.0 ppm/ C Recommended warmup time: 15 minutes Trigger Trigger Source Software External digital PXI STAR (PXIe ersion) PXI trigger bus [0..7] (PXIe ersion) Trigger Mode PostTrigger External Digital Trigger Input Compatibility: 3.3 V TTL Trigger condition: Rising edge or falling edge, software programmable Minimum pulse width: 0 ns Digital Trigger Output Compatibility: 3.3 V TTL Trigger Condition: Positie or negatie, software programmable General Ambient temperature (Operational): 0 C to 55 C (3 F to 1 F) Ambient temperature (Storage): 0 C to 0 C (4 F to 176 F) Relatie humidity: 10% to 90% noncondensing Physical Dimensions (not including connectors) PCIe94: 175 mm (W) x 107 mm (H) (6." x 4.17") PXIe94: 160 mm (W) x 100 mm (H) (6.4" x 3.9") IO Connector SMA x 1 for analog input SMA x for external trigger input and trigger output Bus Interface PCI Express Gen 1 x4 Certifications EMC/EMI: CE, FCC Class A PCIe94 1CH 14Bit 00 MS/s HighSpeed PCI Express Digitizer PXIe94 1CH 14Bit 00 MS/s HighSpeed PXI Express Digitizer 5 Vision 6 Motion Control 7 Realtime Distributed I/O PAC 9 Remote I/O 10 Communications 11 Fanless Embedded Computers www.adlinktech.com 1
PCI/PXI916/96/946 4CH 16Bit 10/0/40 MS/s Digitizers with 51 MB Memory Introduction PCI916/96/946 The ADLINK PCI/PXI916/96/946 are 10 MS/s, 0 MS/s, 40 MS/s sampling 16bit 4CH digitizers designed for digitizing high frequency and wide dynamic range signals with an input frequency up to 0 MHz. The analog input range can be programmed ia software to ±1 V / ±0. V or ±5 V / ±1 V, based on the model. With a deep onboard acquisition memory up to 51 MB, the PXI/PCI916/96/946 are not limited by the data transfer rate of the PCI bus to enable the recording of waeforms for extended periods of time. The PXI/PCI916/96/946 are equipped with four high linearity 16bit A/D conerters ideal for demanding applications with a high dynamic range such as radar, ultrasound, and softwaredefined radio. PXI916/96/946 PXI specifications Re.. compliant (PXI9x6) Supports 5 V and 3.3 V PCI signals Supports the 3bit /66 MHz PCI interface 4 channels of simultaneous singleended analog input 16bit high resolution A/D conerter Up to 10 MS/s, 0 MS/s, and 40 MS/s per channel 51 MB onboard memory for data storage Software selectable 50 Ω or 1 MΩ input impedance Programmable input oltage range: ±0. V / ±1 V or ±1 V / ±5 V 5.1 MHz, 9.6 MHz, and 0 MHz analog input bandwidth for the PCI/PXI916, PCI/PXI96 and PCI/PXI946, respectiely Multiple module synchronization ia the PXI trigger bus or SSI (System Synchronization Interface) Supports scattergather DMA transfer 9 dbc SFDR, 79 dbc SINAD and 1.9bit ENOB (PXI916) Fully autocalibration Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Software Recommendations ADLogger, Bench Analog Input Number of channels: 4 singleended channels Input impedance: 50 Ω or 1 MΩ, software selectable Input coupling: DC Input range: (±0. V, ±1 V ) or (±1 V, ±5 V), depends on model type ADC resolution: 16 bits, 1 in 65536 Crosstalk: <0 db from DC to 1 MHz, for all input ranges System noise, unit in LSB RMS : Input Range PXI916D PXI96D PXI946D PXI946W PCI946D ±0. V 5.0 6.0.0 15.0.0 ±1 V 3.0 4.0 5.0 7.0 5.0 Input Range PCI916H PCI96H PCI946H PXI946H ±1 V 5.0 6.0.0.0 ±5 V 3.0 4.0 5.0 5.0 Offset error: Gain error: Model Name Offset error Model Name Offset error PXI916D/96D/946D/946W, PCI946D ±0. mv PXI946H, PCI916H/96H/946H ±0.3 mv Input Range PXI916D/96D/946D/946W, PCI946D ±0. V ±0.1% ±1 V ±0.05% Input Range PXI946H, PCI916H/96H/946H ±1 V ±0.1% ±5 V ±0.06% 3dB Bandwidth, typical: Input Range PXI916D PXI96D PXI946D/PCI946D PXI946DW @ 50 Ω and 1 MΩ input impedance ±0. V, ±1 V 5.1 MHz 9.6 MHz 0 MHz 0 MHz (±1 V) 55 MHz (±0. V) Input Range PCI916H PCI96H PXI946H/PCI946H @ 50 Ω input impedance ±1 V, ±5 V 5.1 MHz 9.6 MHz 0 MHz @ 1 MΩ input impedance ±1 V, ±5 V 90 KHz Spectral Characteristics Model: PXI916D/51 Input Range: ±0. V Sampling Rate: 10 MS/s SINAD: 76.56 dbc SNR: 76.59 dbc THD: 95.91 dbc ENOB: 1.4 bit SFDR: 99.73 dbc 13 www.adlinktech.com
Digitizers 1 PXI/PXIe Model: PXI916D/51 Input Range: ±1 V Sampling Rate: 10 MS/s SINAD: 79.0 dbc SNR: 0.19 dbc THD:.61 dbc ENOB: 1.96 bit SFDR: 9.0 dbc Typical alues are measured using 1 MHz sine wae input at 10 MS/s with amplitude at 1dB at full scale on a ±1 V and ±0. V range using the PXI916. Acquired data lengths are in 64 K point, calculated with Hanning window FFT. Note that these dynamic parameters may ary from one module to another, with different input signal frequencies and signal amplitudes selected. For detailed dynamic test results of other modules, please refer to the user manual or isit the ADLINK website. Timebase Sample clock sources Internal: onboard oscillator External: CLK IN (front panel SMB connector), PXI Trigger Bus[0..7], PXI 10 MHz, PXI Star, SSI Bus Timebase frequency range PCI/PXI916: 1 MHz 10 MHz PCI/PXI96: 1 MHz 0 MHz PCI/PXI946: 1 MHz 40 MHz Dedicated External Clock Input From Panel Connector type: SMB Clock type: sine wae or square wae Input impedance: 50 Ω Input coupling: AC Input range: 1 Vpp to Vpp Oeroltage protection:.5 Vpp Triggering Trigger sources: software TRG IO (front panel SMB connector) Analog trigger from CH0 CH3 PXI Star (PXI ersion) PXI Trigger Bus[0..7] (PXI ersion) SSI (PCI ersion) Trigger modes: Pretrigger, posttrigger, middletrigger, delaytrigger Data Storage and Transfer Onboard memory: 51 MB, shared among the four AI channels Data transfer: scattergather DMA Onboard Reference Onboard reference oltage: +5 V Temperature drift: < 3 ppm/ C Recommended warmup time: 15 minutes Magnitude (db) 100 10 0 1 3 4 5 Frequency (Hz) x 10 6 General I/O Connector BNC X4 for analog inputs SMB X for external digital trigger and external timebase input Dimensions (not including connectors) PCI9x6: 167.6 mm (W) x 107 mm (H) (6.53" x 4.17") PXI9x6: 160 mm (W) x 100 mm (H) (6.4" x 3.9") 0 0 40 60 0 CLK IN TRG IO CH0 CH1 CH CH3 PXI916/96/946 PCI916/96/946 PCI Bus Interface PCI signaling: support 3.3 V and 5 V signaling PCI interface: 3bit, 66 MHz Ambient temperature (Operational): 0 C to 55 C (3 F to 131 F) (PXI ersion) 0 C to 50 C (3 F to 1 F) (PCI ersion) Ambient temperature (Storage): 0 C to 0 C (4 F to 176 F) Relatie humidity: 10% to 90% noncondensing Power Requirement, typical: Power Rails PXI/PCI916 PXI/PCI96 PXI/PCI946 3.3 V 0. A 0. A 0. A 5 V 1.4 A 1.5 A.0 A 1 V 0.3 A 0.3 A 0.3 A Certifications EMC/EMI: CE, FCC Class A MultiModule Synchronization For PXI ersion of digitizer modules, they can be synchronized through PXI trigger bus, PXI Star and PXI 10 MHz. For PCI ersion of digitizer modules, they can be synchronized through a dedicate interface, SSI (System Synchronized Interface). Cable Accessories SMBSMB1M 1 meter SMB to SMB cable SMBBNC1M 1 meter SMB to BNC cable ACLSSI SSI Bus cable for deices SSI bus cable for multiple module synchronization ACLSSI3 SSI Bus cable for 3 deices ACLSSI4 SSI Bus cable for 4 deices Model Name Sampling Rate Input Range Max. 3dB Bandwidth PCI916H/51 10 MS/s ±5 V, ±1 V 5.1 MHz PCI96H/51 0 MS/s ±5 V, ±1 V 9.6 MHz PCI946H/51 40 MS/s ±5 V, ±1 V 0 MHz PCI946D/51 40 MS/s ±1 V, ±0. V 0 MHz PXI916D/51 10 MS/s ±1 V, ±0. V 5.1 MHz PXI916H/51 10 MS/s ±5 V, ±1 V 5.1 MHz PXI96D/51 0 MS/s ±1 V, ±0. V 9.6 MHz PXI946D/51 40 MS/s ±1 V, ±0. V 0 MHz PXI946DW/51 40 MS/s ±1 V, ±0. V 0 MHz PXI946H/51 40 MS/s ±5 V, ±1 V 0 MHz Note: For special features or specifications, such as higher input range or higher bandwidth options, please contact ADLINK for more details. Modular Instruments 3 4 GPIB & Bus Expansion 5 Vision 6 Motion Control 7 Realtime Distributed I/O PAC 9 Remote I/O 10 Communications 11 Fanless Embedded Computers www.adlinktech.com 14
PCI/PXI90 CH 14Bit 65 MS/s PCI/PXI Digitizers with SDRAM Digitizers PCI90 Introduction ADLINK s PCI/PXI90 is a 65 MS/s, highresolution PXI digitizer with deep SODIMM SDRAM memory. The deice features flexible input configurations, including programmable input ranges and userconfigurable input impedance. With the deep onboard acquisition memory, the PCI90/PXI90 is not limited by the 13 MB/s bandwidth of PCI bus and can record the waeform for a long period of time. The PCI90/PXI90 is ideal for highspeed waeform capturing, such as radar and ultrasound applications, as well as software radio applications, or those signal digitizing applications which need deep memory for data storage. PXI90 Supports a 3bit 3.3 V or 5 V PCI bus PXI specifications Re.. compliant (PXI90) 14bit A/D resolution Up to 60 MS/s (with internal timebase) & 65 MS/s (with external timebase) sampling rate per channel Up to 130 MS/s sampling rate in "ping pong" mode CH singleended bipolar inputs >30 MHz 3 db bandwidth Up to 51 MB onboard SODIMM SDRAM Programmable ranges of ±1 V and ±5 V Userconfigurable input impedance of 50 Ω or high input impedance Scattergather DMA Analog and digital triggering CH synchronous digital inputs (PXI90) Fully auto calibration Multiple modules synchronization capability Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Software Recommendations ADLogger, Bench CLK IN CLK IN TRG IO TRG IO SDI0 SDI1 CH0 CH0 CH1 CH1 Analog Input Number of channels: simultaneoussampled singleended Resolution: 14 bits Maximum sampling rate 65 MS/s for inputs 130 MS/s for PingPong mode using external timebase Onboard sample memory 51 MB Bandwidth (3 db): 30 MHz minimum Input signal ranges: (software programmable) ±5 V, ±1 V Input Coupling: DC Oeroltage protection Range Oeroltage Protection ± 5 V ± 14 V ± 1 V ± 5 V Input Impedance (soldering selectable): 50 Ω, 1.5 MΩ Crosstalk: < 0 db, DC to 1 MHz Total harmonic distortion (THD): 75 db SignaltoNoise ratio (SNR) Range SNR ± 5 V 66 db ± 1 V 6 db Spuriousfree dynamic range (SFDR): 75 db Data transfer: busmastering DMA with scattergather Auto Calibration Onboard reference: +5 V Onboard reference temperature drift: ppm/ C Stability: 6 ppm/1000 Hrs External Timebase Input PCI90: direct external timebase input PXI90: 10 MHz input for PLL or direct external timebase input Connector: SMB Impedance: 50 Ω Coupling: AC Input amplitude: 1 Vpp to Vpp Oeroltage protection:.5 Vpp Frequency range: 500 khz 65 MHz Triggering Analog Triggering Modes: pretrigger, posttrigger, middletrigger, delaytrigger Sources: CH0 and CH1 Coupling: DC Digital triggering Modes: pretrigger, posttrigger, middletrigger, delaytrigger Source: external digital trigger from SMB Compatibility: 5 V/TTL Synchronous Digital Input (For PXI90 Only) Number of channels: Compatibility: 5 V/TTL Data transer: busmastering DMA with scatter/gather General I/O connector BNC x for analog inputs SMB x 4 for external digital trigger, external time base, and synchronous digital inputs Operating temperature: 0 C to 50 C (3 F to 1 F) Storage temperature: 0 C to 0 C (4 F to 176 F) Relatie humidity: 10% to 90%, noncondensing Power requirements Power Rail Current 5 V 1 V 3.3 V PXI90 900 ma typical 305 ma typical 360 ma typical (with 1 MB SDRAM) PCI90 95 ma 95 ma 310 ma (with 1 MB SDRAM) 500 ma typical (with 51 MB SDRAM) 430 ma (with 51 MB SDRAM) Dimensions (not including connectors) PCI90: 175 mm x 107 mm (6. x 4.17 ) PXI90: 160 mm x 100 mm (6.4 x 3.9 ) Certifications EMC/EMI: CE, FCC Class A Cable Accessories Cable Description PXI90 PCI90 SMBSMB1M 1meter SMB to SMB cable SMBBNC1M 1meter SMB to BNC cable ACLSSI SSI Bus cable for deices ACLSSI3 SSI Bus cable for 3 deices ACLSSI4 SSI Bus cable for 4 deices PCI90D/10 CH 14Bit 65 MS/s Digitizer with 1 MB Memory PCI90D/510 CH 14Bit 65 MS/s Digitizer with 51 MB Memory PXI90D/1 CH 14Bit 65 MS/s Digitizer with 1 MB Memory PXI90D/51 CH 14Bit 65 MS/s Digitizer with 51 MB Memory 15 www.adlinktech.com
PCI91/91A/910 4CH 10/1Bit 0 MS/s SimultaneousSampling Analog Input Cards Digitizers 1 PXI/PXIe Supports a 3bit 3.3 V or 5 V PCI bus 1bit A/D resolution (PCI91 and PCI91A) 10bit A/D resolution (PCI910) Up to 0 MS/s simultaneoussampling rate >17 MHz 3 db bandwidth 4CH singleended inputs Bipolar analog input ranges Userselectable input impedance of 50 Ω or highinput impedance Onboard 3 ksample A/D FIFO (PCI910 and PCI91) Onboard 1 ksample A/D FIFO (PCI91A) Analog and digital triggering External clock input for customized conersion rate Busmastering DMA for analog inputs 3CH TTL digital inputs Compact, halfsize PCB Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Software Recommendations ADLogger, Bench Introduction ADLINK s PCI91, PCI910 and PCI91A are 4CH, 10 or 1bit, 0 MS/s simultaneoussampling analog input cards. The highspeed analog input channels are singleended, with hardware programmable input ranges of ±1 V, ±5 V and input impedances of 50 Ω, 1.5 kω and 15 MΩ. The onboard 3 ksample A/D FIFO can buffer so data throughput is less than 100 Mbytes/s, the FIFO performs as the temporary A/D sample buffer, and as a rule of thumb, no data loss will occur. When four channels operate at 0 MS/s simultaneously, each sample generates two bytes, resulting in 160 Mbyes/s (4 channels * 0 M * bytes) throughput, which exceeds the peak 13 Mbyte/s bandwidth of PCI bus. To aoid data loss, the 3 ksample FIFO is the limitation of sample count. For applications requiring a larger number of samples at full sampling rate, the PCI91A features 1 k sample A/D FIFO for storage. In addition to the onboard 40 MHz time base, users are able to supply the external time base in either sine wae or digital forms. The PCI910 and PCI91 also feature external digital trigger and programmable analog trigger, thus the conersion start point of multiple cards can be synchronized to external eents. The trigger modes include softwaretrigger, pretrigger, posttrigger, middletrigger and delay trigger, further expands the capabilities of these highspeed deices. ADLINK s PCI91, PCI910 and 91A delier costeffectie and reliable data acquisition capabilities and are ideal for ibration testing, image digitizing, ultrasonic measurement, biomedical research, ATE and other highend industrial, scientific, and military applications. Analog Input Number of channels: 4 singleended Resolution 1bit (PCI91 and PCI91A) 10bit (PCI910) Maximum sampling rate: 0 MS/s Input signal ranges, impedance and oeroltage protection Input RangeModel Input Impedance Oeroltage protection 50 Ω ±1 V ± V 15 MΩ 50 Ω ±5 V ±10 V 1.5 kω Accuracy: ±1.5% typical DNL: ±0.4 LSB typical, ±1.0 LSB maximum INL: ±1.9 LSB typical Input coupling: DC Trigger sources: software, analog and digital trigger (5 V/TTL compatible) Trigger modes: softwaretrigger, pretrigger, posttrigger, middletrigger & delay trigger FIFO buffer size 3 k samples (PCI910 & PCI91) 1 k samples (PCI91A) Data transfers: busmastering DMA Triggering Analog Trigger Modes: pretrigger, posttrigger, middletrigger, delaytrigger Source: CH0, CH1, CH and CH3 Slope: rising/falling Coupling: DC Trigger sensitiity: 56 steps in fullscale oltage range Digital Triggering Modes: pretrigger, posttrigger, middletrigger, delaytrigger Source: external digital trigger Slope: rising edge Compatibility: 5 V/TTL Minimum pulse width: 5 ns External Sine Wae Clock Input coupling: AC Input impedance: 50 Ω Input frequency: 300 khz to 40 MHz Input range: 1.0 to.0 Vpp Oeroltage protection:.5 Vpp External Digital Clock Input coupling: DC Input impedance: 50 Ω Compatibility: 5 V/TTL Input frequency: 0 khz to 40 MHz Oeroltage protection: diode clamping, 0.3 V to +5.3 V Digital Input Number of channels: 3 Compatibility: 5 V/TTL with 10 KΩ pull down resistors Oeroltage protection: Diode clamping, 0.3 V to +5.3 V Data transfers: busmastering DMA with A/D samples General I/O connector BNC x 5 Modular Instruments 3 4 GPIB & Bus Expansion 5 Vision 6 Motion Control 10pin ribbon male Realtime Distributed Operating temperature: 0 C to 40 C (3 F to 104 F) I/O Storage temperature: 0 C to 70 C (4 F to 15 F) Relatie humidity: 10% to 90%, noncondensing Power requirements Deice PCI91 PCI91A +5 V 1.4 A typical PCI910 1 A typical Dimensions (not including connectors) 173 mm x 10 mm (6.74 x 4.1 ) PCI910 4CH 10Bit 0 MS/s SimultaneousSampling Analog Input Card with 3 ksample A/D FIFO PCI91 4CH 1Bit 0 MS/s SimultaneousSampling Analog Input Card with 3 ksample A/D FIFO PCI91A 4CH 1Bit 0 MS/s SimultaneousSampling Analog Input Card with 1 ksample A/D FIFO 7 PAC 9 Remote I/O 10 Communications 11 Fanless Embedded Computers www.adlinktech.com 16
PCI/PXI957 4Bit HighResolution Dynamic Signal Acquisition and Generation Modules Introduction The PCI/PXI957 is a highperformance, CH analog input and CH analog output dynamic signal acquisition module. This module is specifically designed for audio testing, acoustic measurement, and ibration analysis applications. PCI957 The ADLINK PCI/PXI957 features two 4bit simultaneous sampling analog input channels. The 4bit sigmadelta ADC proides a sampling rate up to 43 ks/s at high resolutions, making it ideal for higher bandwidth dynamic signal measurements. The sampling rate can be adjusted by setting the module DDS clock source to an appropriate frequency. All channels are sampled simultaneously and accept an input range from ±40 V to ±0.316 V. The PCI/PXI957 analog input supports software selectable AC or DC coupling and 4 ma bias current for integrated electronic piezoelectric (IEPE) sensors. PXI957 The ADLINK PCI/PXI957 also has two channels of 4bit resolution, high fidelity analog output. The outputs occur simultaneously at software programmable rates up to 16 ks/s. A software programmable output range of ±0.1 V, ±1 V, and ±10 V is aailable on the output channels. PXI specifications Re.. compliant (PXI957) 4bit SigmaDelta ADC and DAC CH simultaneous sampling analog input CH simultaneous updated analog output 43 KS/s maximum sampling rate with software programmable rate Programmable input range: ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V Programmable output range: ±10 V, ±1 V, ±0.1 V AC or DC input coupling, software selectable Trigger I/O connector for external digital trigger signal Supports IEPE output on each analog input, softwareconfigurable Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Software Recommendations ADLogger, Bench, DSA Utility Dynamic Signal Assistant ADLINK s Dynamic Signal Assistant is a readytorun software utility designed for dynamic signal acquisition modules, such as the PCI/PXI957. This software proides a windowsbased configuration interface for setting parameters, in addition to a realtime isualized data display on the screen. An instrumentlike user interface is also proided for basic waeform generation. The Dynamic Signal Assistant can also log data acquired from hardware modules. With the Dynamic Signal Assistant, signal acquisition and generation can be performed in just a few minutes without any programming effort. Analog Input Number of simultaneously sampled channels: Input configuration: Differential or pseudodifferential, each channel independently softwareselectable Input impedance: Input Impedance Between positie input and system ground Between negatie input and system ground Input coupling: AC or DC, softwareselectable on each channel ADC resolution: 4bit ADC type: Deltasigma Sampling rate: Up to 43 ks/s maximum, ks/s to 43 ks/s in 454.7 µs/s increments Input signal range: ±0.316 V, ±1.00 V, ±3.16 V, ±10.0 V, ±40.0 V Integrated Electronic Piezoelectric (IEPE) Current: 4 ma each channel independently softwareselectable IEPE compliance: 4 V Data transfer: DMA FIFO buffer size: 4096 samples shared for AI channels Input Common Mode Range: ±10 V for both differential and pseudodifferential configuration Oeroltage protection Differential input: ± 40 Vpk Pseudodifferential: Differential Configuration Positie terminal: ± 40 Vpk Negatie terminal: ± 10 Vpk Pseudodifferential Configuration 1 MΩ 1 MΩ 1 MΩ 50 Ω 17 www.adlinktech.com
HighResolution Modules 1 PXI/PXIe AC couple bandwidth 3dB cutoff frequency: 3.5 Hz 0.1dB cutoff frequency: 6 Hz AI Offset Error AI Gain Error Crosstalk Analog Output Number of output channels: Output configuration: Differential or pseudodifferential, each channel independently softwareselectable DAC resolution: 4bit DAC type: Deltasigma Update rate: 1 ks/s to 16 ks/s in 7.3 μs/s increments FIFO buffer size: 04 samples for each analog output channel Output signal range: ±0.1 V, ±1 V, ±10 V Voltage output coupling: DC Minimum working load: 600 Ω AO Offset error and gain error: AO Offset Output Range AO Gain Error Error ±0.1 V ±0.05 mv 0.4% ±1 V ±0.5 mv 0.4% ±10 V ±1 mv 0.4% Output impedance: Between positie output and chassis ground Between negatie output and chassis ground Between positie and negatie outputs Input Range Differential Configuration Pseudodifferential Configuration 50 KΩ 10 KΩ 50 KΩ 50 Ω Offset (±mv) ±40 V 0.5 ±10 V 0. ±3.16 V 0.1 ±1 V 0.05 ±0.316 V 0.05 Crosstalk Adjacent channel < 100 db Measured with ±10 V input Input signal is 1 Vpp @ 1KHz sine wae Analog Input Channel Bandwidth Input Range ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V Input Range ±40V ±0.5% ±30V~±0.316V ±0.% Bandwidth (3dB) 130 KHz 10 KΩ 10 KΩ Analog output, 3dB bandwidth: 110 KHz AO THD+N Output Range 100 Hz to 0 KHz, 00 ks/s ± 0.1 V 9 db ± 1 V 101 db ± 10 V 101 db Triggers Trigger sources: Software trigger Analog trigger External digital trigger PXI Star trigger (PXI957) PXI Trigger bus [0..7] (PXI957) Trigger mode: Posttrigger Delaytrigger Analog trigger Source: AI0, AI1 Trigger leel: full scale input range Trigger conditions: positie or negatie trigger, software selectable Trigger resolution: 4bit External digital trigger Source: front panel SMB connector Compatibility: 5 V TTL Trigger polarity: rising or falling edge Pulse width: 300 ns minimum System Timebase Characteristics Clock frequency: 0 MHz Accuracy: ±0 ppm, oer operating temperature range Timebase source Internal (on board): 15 MHz External: PXI backplane 10 MHz (PXI ersion) General I/O connector BNC x 4 for analog inputs/outputs SMB x 1 for external trigger PCI Bus Signaling: Uniersal PCI, support 3.3 V and 5 V PCI signals Dimensions (not including connectors) PCI957: 175 mm (W) x 107 mm (H) (6. x 4.17 ) PXI957: 160 mm (W) x 100 mm (H) (6.4 x 3.9 ) Ambient temperature (Operational): 0 C to 55 C (3 F to 131 F) (PXI ersion) 0 C to 50 C (3 F to 1 F) (PCI ersion) Ambient temperature (Storage): 0 C to 0 C (4 F to 176 F) Relatie humidity: 10% to 90% noncondensing Calibration Onboard reference: +5 V Temperature coefficient: ±5 ppm/ C Recommend Warmup time: 15 minute Power Requirement Cable Accessories Cable SMBSMB1M SMBBNC1M Description 1 meter SMB to SMB cable 1 meter SMB to BNC cable PCI957 CH 4Bit 43 ks/s HighResolution Dynamic Signal Acquisition and Generation module for PCI bus PXI957 CH 4Bit 43 ks/s HighResolution Dynamic Signal Acquisition and Generation module for PXI bus AI0 AI1 AO0 AO1 Ext. Trig Ext. Trig AI0 AI1 AO0 AO1 Power Rail Standby Current (ma) Full Load (ma) +5 V 930 330 +1 V 310 350 Certifications EMC/EMI: CE, FCC Class A IO connector definition PCI957 IO connector definition PXI957 Modular Instruments 3 4 GPIB & Bus Expansion 5 Vision 6 Motion Control 7 Realtime Distributed I/O PAC 9 Remote I/O 10 Communications 11 Fanless Embedded Computers www.adlinktech.com 1
PXIe959 CH 4Bit HighResolution Dynamic Signal Acquisition Module HighResolution Modules Coming Soon Introduction The ADLINK PXIe959 is a highperformance, high density, CH analog input dynamic signal acquisition module. The PXIe959 features eight 4bit simultaneously sampling analog input channels. The 4bit sigmadelta ADC proides a sampling rate of 19 ks/s at high resolution, making it ideal for higher dynamic range signal measurement. All channels are sampled simultaneously and accept input range up to ±10V, and the analog inputs support softwareselectable AC or DC coupling and 4 ma bias current for integrated electronic piezoelectric (IEPE) sensors. The module is especially designed to meet the requirements of ibration analysis and audio testing. PXI Express specification Re. 1.0 compliant 4Bit SigmaDelta ADC CH simultaneous sampling analog input 19 ks/s maximum sampling rate AC or DC input coupling, software selectable One external digital trigger input Support IEPE output on each analog input, software configurable Full autocalibration Windows XP/7/, x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Software Recommendations ADLogger, Bench, DSA Utility Analog Input Number of simultaneously sampled channels: Input configuration: Differential or pseudodifferential Input impedance: 1MΩ Input coupling: AC or DC, software selectable ADC resolution: 4bit ADC type: Deltasigma Sampling rate: 19 ks/s maximum Input signal range: ± 10V Integrated Electronic Piezoelectric (IEPE): Current: 4 ma for each channel IEPE compliance: 4 V AC coupling cutoff frequency: 0.5 Hz Trigger Trigger Sources Software trigger Analog trigger External digital trigger PXI STAR trigger PXI trigger bus [0..7] Trigger Modes Posttrigger Delay trigger External Digital Trigger Input: 5 V TTL compatibility Trigger polarity: rising or falling edge Pulse width: 0 ns minimum Timebase Onboard oscillator sample clock source 0 MHz timebase frequency Data Storage and Transfer 51 MB onboard memory, shared among the eight analog inputs ScatterGather DMA data transfer Onboard Reference +5.000 V onboard reference oltage < 5.0 ppm/ C reference temperature drift 15 minutes recommended warmup General I/O Connector: SMB x for analog inputs SMB x 1 for external digital input Dimensions (not including connectors) 160 (W) x 100 (H) mm (6.4 x 3.9 ) Bus Interface: PCI Express Gen 1 x4 Ambient Temperature (Operational): 0 C to 55 C (3 F to 131 F) Ambient Temperature (Storage): 0 C to 0 C (4 F to 176 F) Relatie Humidity: 10% to 90%, noncondensing Certifications EMC/EMI: CE, FCC Class A PXIe959 (call for aailability) CH 4Bit HighResolution Dynamic Signal Acquisition Module 19 www.adlinktech.com
PCI954 4Bit Precision Load Cell Input Card HighResolution Modules 1 PXI/PXIe Transducer Inputs for precise measurement 4CH fullbridge load cell transducer inputs Accuracy up to 1/00,000 counts at fullscale Sensitiity from 1.0 mv/v to 4.0 mv/v.5/10 VDC excitation oltage, software selectable Internal 4bit A/D resolution Motion control interface for stepper and hydraulic system control 3axis PWM output with OUT/DIR and CW/CCW mode CH 16bit analog outputs AB phase encoder input with 4bit counter GeneralPurpose Analog Inputs for accurate measure ments of LVDT 1 and linear wire potentiometer signals 4CH analog input with 4bit resolution Programmable gains of ±1.5 V, ±.5 V, ±5 V, ±10 V Up to 30 ks/s sampling rate (single channel) Note 1: LVDT: Linear Variable Differential Transducer Windows 000/XP, Windows 7 x64/x6 Software Compatibility LabVIEW, MATLAB, Visual Studio, Visual Studio.NET Software Recommendations Bench, Master Introduction The PCI954 is a robust, multipurpose module designed for turnkey material test systems (MTS). Equipped with four strain gaugebased fullbridge transducer input channels, four general purpose analog input channels, and a 3axis motion controller, the PCI954 deliers a complete hardware solution for MTS manufacturers. The PCI954 easily integrates physical quantity measurement and implements strategy of softwarebased closeloop control in a single module package. For transducer measurement, the PCI954 supports sensitiity from 1.0 mv/v to 4.0 mv/v and proides a 1/00000 accuracy of measurement of full scale. These features make the PCI954 suitable for precise measurement in largescale transducers. The PCI954 is also equipped with four, 4bit general purpose analog input channels that allow accurate measurements of the LVDT (Linear Variable Differential Transducer) and Linear wire potentiometer signals to achiee highresolution of displacement. With motion control capability and 16bit DA channels, the PCI954 comes with three stepper/sero motor axes and two channels of hydraulic system control function. The builtin incremental encoder feedback channels enable the PCI954 to implement the stratagem of MTS softwarebased closedloop control. The impressie PCI954 features permit easy implementation of required control or measurement functionalities with just a single module, saing precious deelopment and integration time for MTS manufacturers, CNC machines, and ciil testing equipment. 4channel Load Cell Transducer Input Excitation oltage:.5 V/10 VDC Internal A/D resolution: 4bit Update speed when Autozero Disabled Up to 30 KSPS (single channel) Up to 1,63 SPS (multichannel) Update speed when Autozero Enabled Up to 19 SPS (single channel or multichannel) Transducer sensitiity: 1.0 mv/v to 4.0 mv/v Number of channels: 1.6 Accuracy: 1/00000 of full scale (with remote sense & auto zero enabled) Onboard 56 samples A/D FIFO PWM Output & Encoder Input Number of axis: 3 Pulse output options: OUT/DIR and CW/CCW (6LS31, differential line drier, driing current: up to 0 ma) Maximum output frequency: 500 khz Encoder Input: 4bit up/down counter for incremental encoder feedback General Purpose Analog Input Resolution: 4bit Programmable range: ±1.5 V, ±.5 V, ±5 V, ±10 V Number of channels: 4 Sampling rate: 30 ks/s (nonmultiplexing) Onboard 56 samples A/D FIFO Isolated Digital Input Number of channels: Maximum input range (nonpolarity): 0 V to 4 V Input resistance:.7 KΩ Isolated Digital Output Number of channels: Output type: Power MOSFET Sink current: Up to 300 ma/channel Analog Output Resolution: 16bit Output range: ±10 V Number of channels: Update rate: Up to 5 ks/s Onboard 1 K samples D/A FIFO Driing capability: 5 ma Hardware Timer Interrupt Base clock: 40 MHz Resolution: 3bit Interrupt Frequency: 40MHz / N ; N=1~ 3 General 5V power output current: ISO5VDD: max. 160 ma ISOPWR: max. 16 ma I/O connector: Two 6pin SCSIVHDCI female Operation Temperature: 0 to 45 C Power requirements: 5 V @ A Dimensions (not including connectors): 156 mm x 116 mm (6.14" x 4.57") PCI954 4Bit Precision Load Cell Input Card Modular Instruments 3 4 GPIB & Bus Expansion 5 Vision 6 Motion Control 7 Realtime Distributed I/O PAC 9 Remote I/O 10 Communications 11 Fanless Embedded Computers www.adlinktech.com 0