Coated Aluminium Sheets and Coils for Roller Shutters and other Building Applications

Coated Aluminium Sheets and Coils for Roller Shutters and other Building Applications

Products Quality Certification According to EN / ECCA and AA standards. Coated Aluminium Sheets and Coils for Roller Shutters and other Building Applications Painted Aluminium Sheets and Coils for various Building Applications facilities, ELVAL manufactures premium quality painted Aluminium Sheets and Coils for architectural applications in Plain, Corrugated ELVAL material is used for: Composite and Partitioning Panels Facades Outdoor Venetian Blinds Rain Gutters ELVAL s ENF external building façade system based on aluminium sheets of special alloy and coating is suitable for cladding new as well as existing buildings as part of their refurbishment. Aluminium Strips for Roller Shutters and Roller Cases Committed to continuous development and full customer satisfaction, ELVAL provides painted strips for roller shutters in four alternative lacquering systems. ELVAL material combines perfect formability during roll forming and high resistance to scratch-abrasion for its use in all roller shutter systems. Coating Line

Production Range (mm) Gauge Width Sheets Coils Roller Shutters 0.0 to.00 0.8 to.00 0. to 0.0 max.,00 max.,00 min 80.0 Coils can be supplied with inside diameter core of 00 or 00mm Roller Shutter Strips Mechanical Properties 00-H 00-H8 Min. Typical Min. Typical Tensile Strength (N/mm ) 90 00-0 0 0-0 Yield Strength (N/mm ) 0 80 90 00-0 Elongation (%) Lacquers Colours Top side Polyurethane-Polyamide or Polyester-Polyamide. Colours as per RAL or NCS range of colours, or as per customers request. Bottom side Protective transparent lacquer suitable for polyurethane foam adhesion. provided. SYSTEM Lacquering Systems SYSTEM SYSTEM Polyester/Polyamide SYSTEM st coat Primer ( +/- µm) - Primer ( +/- µm) Base coat nd coat (0 +/- µm) ( +/- µm) Polyester/Polyamide (0 +/- µm) Clear coat Gloss 0-0% 0-0% 0-0% - % Exhibition center (roofing sheets)

colours according to the various commercials customer-requested colour through a colour-matching technique, based on modern spectrophotometers and dedicated computer software. This facility enables the correct reproduction as measured by the ΔE parameter, the individual colourimetric components ΔL, The above technique guarantees the reproduction of any colour in order to match the characteristics of a particular batch previously produced.

Painted Sheets and Coils Range of Alloys and Tempers Available for Painted Sheets and Coils Alloys 00 00 00 00/0 00 0 00 0 7 -H -H -H -H8 7 Lacquering types and Characteristics Painting Processes currenty used for one or both sides Lacquer type Polyester (also metalics) P.V.D.F. (also metalics) P.V.D.F. (also metalics) Coats Gloss 90% max % % 8 a. POLYESTER COATING b. P.V.D.F. COATING 7. PE protection film (optional). Top coat. Primer. Chromium phosphate layer. Al. Protection layer. PE protection film (optional). P.V.D.F. Clear paint (optional). P.V.D.F. Paint. Primer. Chromium phosphate layer. Al 7. Protection layer Finishes Sheets can be produced either with protection PE film or paper interleaved. Film Protection: -70 mic transparent, 0-80 mic Blue and UV resistant, 0-00 mic Black and White UV resistance 9 Sheets and Coils can also be delivered Stucco embossed 7 8 9 Gauge mm, Alloy 7 H, Coating: or layer PVDF. Coil weight depends on the alloy and customer specifications. Wider material can be produced upon request. Other systems might be agreed upon customer s request. Other tempers can be considered upon request. Also produced for façade applications. According to RAL colour range or as per customer samples. The thickness of the paint may generally be from to mm on one or both sides- other thickness can be considered upon request. Other gloss range can be agreed with the customer. Depending on the alloy, max. gauge can be.mm and minimum 0.mm. Max. width.00mm

p.0.08 7th km Athens - Lamia National Road, GR-0 Oinofyta, Viotia, GREECE www.elval.gr, e-mail: info@elval.vionet.gr Tel.: +0 0, Fax: +0 0 8 METAL AGENCIES Ltd Tel.: + 9, Fax: + 9 90, www.metalagencies.com, e-mail: sales@metalagencies.com GENECOS S.A. 9, Rue de Passy, 70 Paris, FRANCE Tel.: + 707, Fax: + 70708, e-mail: genecos@genecos.vionet.gr TEPRO METALL Vertriebs GmbH Ursualastrasse -, 0 Hϋrth, GERMANY Tel: +9 9, Fax: +9 9 9, e-mail: dmuller@teprometal.vionet.gr ELVAL AUTOMOTIVE GmbH Ursualastr. -, D-0 Hϋrth, GERMANY Tel: +9 988-0, Fax: +9 988-0, e-mail: info@elval-automotive.de ALURAME S.r.l Viale Colleoni, Palazzo Taurus, 00 Agrate Brianza (MI), ITALY Tel.: +9 09 0, Fax: +9 09 00, e-mail: alurame@alurame.vionet.gr STEELMET ROMANIA S.A. Drumul intre Tarlale street, rd sector, 7 Bucuresti, ROMANIA STEELMET S.A. Tel.: +9 99, Fax: +9 99, www.steelmet.bg, e-mail: steelmet@mail.orbitel.bg METAL GLOBE D.o.o. Blvd. Mihajla Pupina, nr. 0a, objekat G, ulaz IV, YBC Kompleks-blok, 070 Novi Beograd, SERBIA