LED High Bay with LexaLite S16 and S22 Reflexors Combined with LexaLite S16 and S22 Reflexors, Forest Lighting high bay fixtures and modules offer complete solutions that enable going to market quickly. S16 and S22 Reflexors are adapted to high beam angles and designed for use with round form factor LED high bays. Each has a large flat top that allows for easy adaptation to wide variety of LED modules and LED driver housings eliminating the need for costly ancillary aluminum collars. Both Reflexors are designed to fit with existing clamp band, flat lens, conical lens and drop lens options. Features and Benefits of S16 and S22 Reflexors: Standard clear acrylic version is cost effective and provides a traditional yet low profile appearance daptable to any round form factor LED high bay fixture with an opening of up to 10 inches Interface version yields high down light efficiency and a gentle glow for maximum brightness control Polycarbonate, Frost crylic and Impact Modified crylic custom options S16 accommodates standard 16 diameter bottom lenses including the Model 350-361 Drop Lens, 816 Conical Drop Lens and Flat lenses S22 accommodates standard 22 diameter bottom lenses including the Model 622 Drop Lens, 822 Conical Drop Lens and Flat lenses. Bottom lenses are primarily for low bay applications where brightness control is paramount. Bottom lenses also enhance uplight S16 Reflexor S22 Interface Reflexor Features and Benefits of Forest Lighting High Bay Fixtures and Modules: Works with LexaLite prismatic reflexors S16 and S22 luminum heatsink provides excellent thermal conductivity and fast cooling Light weight 5 Years Warranty IP40
LexaLite S16 and S22 Reflexor Specifications 11.08 R.75-16 nnular Optics Can be cut to max opening of 10.06 0.130 OT 0.08 Base Wall.10 16.00 S16 High Bay Reflexor Specifications Dimensions 8.5 H x 16 diameter pproximate weight 2-2.5lbs.150 Gate 5.43 REF. Section - Date code and material ID pin on this rim Materials Lighting Grade crylic Interface crylic Polycarbonate Frost crylic LED Grade crylic 8.50 Ø16.22.20 ccessories/options 816 Conical Drop Lens 816 Smooth Flat Lens 816 Clamp Band 816 Wire Guard 350-361 Tapered Drop Lens Standard part drawing shown. For drawings of high bay specific part numbers visit www.platformseries.com..250 Section C.125.130 Date code, material ID, and LexaLite ID Pins on this surface S22 High Bay Reflexor C Specifications.15 Gate rea Dimensions 8.2 H x 22 diameter pproximate weight 4lbs B Finished opening dependent upon customer requirements 10.44 Ø10.06 MX 22.16 Materials Lighting Grade crylic Interface crylic Polycarbonate Frost crylic LED Grade crylic 8.400 Ø22.42 REF R.75 REF. 30 nnular Optics.190 O..T..177 REF. Section D.02 REF. D.170 O..T..120 Basewall Section B Section - R.125 REF. 280 Optics 140 Full Length 140 Stop Short ccessories/options Model 622 Drop Lens Model 822 CDL Model 822 Flat Lens 822 Clamp Band 822 Wire Guard Standard part drawing shown. For drawings of high bay specific part numbers visit www.platformseries.com. For sales inquiries contact your local Bill Brown Sales Representative at (800) 621-1348
High Bay Fixture Specifications Ready to connect with Lexalite S16 and S22 Reflexors and go to market Part Number Power CCT CRI Lumious Flux Input Power IP Rating Weight Voltage Factor (lb) FL-HB100N4 100W 5000K >80 10,000lm 120-277VC >0.90 IP40 7.7 FL-HB150N4 150W 5000K >80 15,000lm 120-277VC >0.90 IP40 9.7 FL-HB200N4 200W 5000K >80 20,000lm 120-277VC >0.90 IP40 11.2 (Note: ll specifications are with high bay partner s representative reflector, LED module and LED driver.) High Bay fixture without LED Module Highbay fixture without LED Module Part Number Power Input Voltage Power Factor IP Rating FL-HS100N4-D 100W 120-277VC >0.90 IP40 FL-HS150N4-D 150W 120-277VC >0.90 IP40 FL-HS200N4-D 200W 120-277VC >0.90 IP40 High Bay fixture without LED Driver and without LED Module Highbay fixture without LED Driver and LED Module Part Number Maximum LED IP Rating Module Power FL-HS100N4 100W IP40 FL-HS150N4 150W IP40 FL-HS200N4 200W IP40 Order Information: Forest Lighting US 20823 Park Row Drive Katy, TX 77449 Email: order@forestlighting.com Work Phone: (800) 994-2143 www.forestlighting.com 100N4 150N4 200N4 184 343 368.5 418.5 182 90.2 238.7 105.9 238.7 105.9 291 184
PHOTOMETRY.L.P. LexaLite Brand Test Report 05347 Specification S16i with Forest Lighting Light Engine of 300 LEDs and Clear Domed Lens Input Wattage 187.40 Delivered Lumens (lms) 16910.0 Efficacy (LpW) 104.64 Voltage (V) 277v Lumen Summary Zone Lumens % Fixture 0-30 5891.57 30.00 0-40 9754.95 49.70 0-60 13656.11 69.60 0-90 17708.55 90.30 90-120 1341.06 6.80 90-130 1542.16 7.90 90-150 1793.57 9.10 90-180 1907.40 9.70 0-180 19615.95 100.0.L.P. LexaLite Brand Test Report 05348 Specification S22 with Forest Lighting Light Engine of 100 LEDs and Clear Domed Lens Input Wattage 187.40 Delivered Lumens (lms) 2011.4 Efficacy (LpW) 106.78 Voltage (V) 277v Lumen Summary Zone Lumens % Fixture 0-30 5786.67 28.90 0-40 9426.46 47.10 0-60 133.98 76.10 0-90 17530.51 87.60 90-120 1617.92 8.10 90-130 1929.09 9.60 90-150 2313.62 11.60 90-180 2489.02 12.40 0-180 20019.53 100.0 Visit www. platformseries.com for further photometry files
Cross Reference Forest Lighting High Bay Part Number.L.P. LexaLite Reflector Reflector Material.L.P. P/N CL-HB100N4 S16 Clear LED Grade crylic Contact Factory CL-HB100N4 S16 Interface crylic Contact Factory CL-HB100N4 S16 Frost crylic Contact Factory CL-HB100N4 S16 Clear Polycarbonate Contact Factory CL-HB150N4 S16 Clear LED Grade crylic Contact Factory CL-HB150N4 S16 Interface crylic Contact Factory CL-HB150N4 S16 Frost crylic 705727 CL-HB150N4 S16 Clear Polycarbonate Contact Factory CL-HB150N4 S22 Clear LED Grade crylic 805660 CL-HB150N4 S22 Interface crylic Contact Factory CL-HB150N4 S22 Frost crylic 805659 CL-HB150N4 S22 Clear Polycarbonate Contact Factory CL-HB200N4 S16* Clear LED Grade crylic Contact Factory CL-HB200N4 S16* Interface crylic Contact Factory CL-HB200N4 S16* Frost crylic 705727 CL-HB200N4 S16* Clear Polycarbonate Contact Factory CL-HB200N4 S22 Clear LED Grade crylic 805660 CL-HB200N4 S22 Interface crylic Contact Factory CL-HB200N4 S22 Frost crylic 805659 CL-HB200N4 S22 Clear Polycarbonate Contact Factory Note: * S16 not recommended due to potential glare For sales inquiries contact your local Bill Brown Sales Representative at (800) 621-1348