your comfort. our world. Daikin UK Training 2014/15 Heating and renewables
Contents Introduction to Daikin UK customised product training 1 Courses now available around the UK 2 Regional college contact details 3 Daikin UK working in conjunction with The National Skills Academy 4 How to check availability and book a course 5 Product related courses 6-11 EAL industry accredited heating courses 12-14 Industry related refrigeration courses available at regional technical colleges 15-16 Open weekdays 09.00 17.30 T: 0845 641 9260 E: training@daikin.co.uk F: 0845 641 9075 www.daikintraining.co.uk
Daikin UK s customised product training Designed to raise standards, set industry benchmarks and help you develop both product and service expertise. You ll receive the highest quality training and hands-on instruction at our industry leading technology centres. Latest range of products Courses are available to attend at Bristol, Woking, Birmingham, Manchester and Glasgow. The Daikin UK regional training centres are fully equipped with the latest range of products, installed and fully operational for maximum hands-on experience. All training is given by highly skilled engineers who will be able to provide you with extensive in depth knowledge of our equipment. If you have any specific training requests outside of the scheduled programme, please contact us. A general overview of the style of course content offered: 1. Product selection and application techniques 2. Installation and commissioning requirements 3. Advanced service and fault finding for field engineers Why invest in training on the latest systems: > The rapidly growing market in heat pumps and heat recovery systems offers major new business opportunities > New technologies require wider knowledge of heating, refrigeration and safe handling techniques > Tighter regulations demand certified skills and renewal of existing certifications > Specialist training programmes provide invaluable hands-on experience in the very latest technologies Daikin UK training centres 1 Bristol Daikin Airconditioning UK Limited Maple House, Brotherswood Court, Great Park Road, Almondsbury, Bristol BS32 4QW 2 Woking Daikin Airconditioning UK Limited 1 River Court, Albert Drive, Woking, Surrey GU21 5RP 3 Birmingham Daikin Airconditioning UK Limited Unit 8, Holly Park, Spitfire Road, Birmingham, West Midlands B24 9PB 4 Manchester Daikin Airconditioning UK Limited 17b Cobra Court, Blackmore Road, Manchester M32 0QY 5 Glasgow Daikin Airconditioning UK Limited Unit 2, Glasgow Airport Business Park, Marchburn Drive, Paisley PA3 2SJ Daikin UK Training 2014/15 1
Courses now available around the UK With Daikin UK s support, specialist further education colleges around the UK are offering high-class training with state-of-the-art equipment, helping raise industry standards, for the highly skilled engineers who are in increasing demand. Course categories and available Training Centres Daikin UK Training Centres City of Bath College College of North West London Dudley Energy Training Hub West Suffolk College PGL Training Daikin heating products 4 8 8 8 4 4 Industry accredited heating courses 8 8 4 4 8 4 Industry related refrigeration practical skills 8 4 4 4 8 8 Daikin air conditioning products (see separate brochure) 4 8 8 8 4 8 Daikin controls (see separate brochure) 4 8 8 8 8 8 Daikin chiller products (see separate brochure) 4 8 8 8 8 8 Daikin refrigeration products (see separate brochure) 4 8 8 8 8 8 Growth together Daikin UK is committed to ensuring that the next generation of heating, air conditioning and ventilation engineers have the specialist skills and practical experience required to install and maintain the innovative new technologies that can improve the performance of HVAC-R systems while reducing their environmental impact. In turn, this will help employers who invest in apprenticeships and ongoing training of their engineers to capitalise on the growing business opportunities for companies with proven expertise in delivering highly energy-efficient climate control systems. College collaborations So far, this on going initiative has created the following collaborations with Daikin UK: 1 City of Bath College 2 College of North West London 3 Dudley Energy Training Hub 4 West Suffolk College 5 PGL Training Each college offers carefully prepared training courses. For more information, please contact your nearest college directly (see page 3). 2 Heating and renewables
Regional college contact details For advice, bookings and costs, please contact your nearest participating college... City of Bath College Avon Street, Bath, Avon BA1 1UP Contact: Darran Marks Tel: 01225 328 635 Email: renewables@citybathcoll.ac.uk Web: www.citybathcoll.ac.uk Dudley Energy Training Hub Dudley College Training Ltd Dudley Energy Training Hub 3-4 Railway Street, Great Bridge Tipton DY4 7AD Contact: Ranjit Uppal Tel: 0121 522 0251 Email: ranjituppal@energytraininghub.co.uk Web: www.energytraininghub.co.uk College of North West London Dudden Hill Lane, London NW10 2XD Contact: Feraline Whyte Tel: 0208 208 5276 Fax: 0208 208 5279 Email: feraline.whyte@cnwl.ac.uk Web: www.cnwl.ac.uk PGL Training Clyst Works, Clyst Road, Topsham Exeter EX3 0DB Contact: Andy White Tel: 01392 437 373 Fax: 01392 877 277 Email: enquiries@pgltraining.com Web: www.pgltraining.com West Suffolk College The Milburn Centre Anglian Lane, Bury St Edmund s Suffolk IP32 6RA Contact: Mary Featherstone Tel: 01284 716 246 Fax: 01284 750 561 Email: mary.featherstone@wsc.ac.uk Web: www.westsuffolkcollege.ac.uk For more information or to apply for one of the listed City & Guilds or CITB/BRA college industry skills related courses, please contact your nearest college directly. Course details can be found on pages 15 & 16. Daikin UK Training 2014/15 3
Daikin UK working in conjunction with The National Skills Academy Daikin Airconditioning UK has joined forces with The National Skills Academy for Environmental Technologies to create its first national Manufacturer Hub. The pioneering Daikin UK Manufacturer Hub is the first to be developed by the Skills Academy to provide bespoke training for an individual manufacturer s products. It will complement and interact with the Skills Academy s network to enable trainees to gain qualifications in air-to-water heat pump technology, allowing them to work towards a Microgeneration Certification Scheme (MCS) accreditation and be fully qualified to install Daikin renewable technology systems. The aim is to increase the number of MCS accredited installers throughout the UK. Designed to offer assurances that products and services meet rigorous and consistent Government standards, easing any end-user concerns about adopting an innovative product or technology. The Daikin UK Manufacturer Hub will initially be based at three of the vocational training venues, with whom Daikin UK has already formed working relationships. These venues include College of North West London, Dudley Energy Training Hub and PGL Training in Exeter. The Skills Academy provides training in the design, installation and maintenance of technologies such as solar thermal, photovoltaics, heat pumps, water harvesting and recycling. Comprising 23 hub colleges, the Academy works to offer accredited environmental technologies training, all of which meets the requirements for MCS certification. 4 Heating and renewables
How to check availability and book a course To find out when DUK-SE courses are scheduled at regional Daikin UK training centres and at regional technical colleges, check availability and book a place, please go to the new Daikin UK booking web site system at www.daikintraining.co.uk For all technical college courses, references starting DUK-CO... and/or DUK-IR..., please contact your nearest regional technical college direct. Further contact information details can be found on page 3. Daikin UK Training 2014/15 5
Product related courses Daikin UK product courses are hosted at our regional training centres, and will introduce you to the application, installation, commissioning and service of the latest products in the Daikin range. For 2014 Daikin UK has introduced a number of courses covering our very latest product ranges. These include: Daikin Altherma Flex Type systems DUK-SE20 Installation and commissioning 2 day course duration No DUK-SE5 & DUK-SE18 course attendance prerequisite requirements Daikin Altherma hybrid heat pump systems DUK-SE32 Installation and commissioning 1 day course duration DUK-SE11 course attendance prerequisite requirement Daikin Altherma hybrid heat pump systems DUK-SE37 Installation and commissioning 2 day course duration No DUK-SE11 attendance prerequisite requirement Full details of these courses can be found in the following pages. 6 Heating and renewables
Daikin Altherma: low temperature split systems Installation and commissioning including monobloc Reference: DUK-SE11 Refrigerant: R410A Objectives > Installation requirements > Commissioning procedures Installation and commissioning engineers Duration 2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow. Also available at West Suffolk College and PGL Training Trainer Daikin UK technical engineer, or regional college lecturer Programme Day 1 > R22 legislation > Options and technical specifications > Daikin Altherma selection software > Air-water heat pump > Mechanical installation > Electrical installation Day 2 > System water and refrigerant flows > Pre-start up checks and field settings > Use of the remote control interface > Advanced functional overview > Recommended service and maintenance > Fault finding > Questions and answers Price 300 (ex vat) Including course syllabus and technical data manuals Daikin Altherma: low and high temperature split systems Selection and application including monobloc and hybrid systems Reference: DUK-SE15 Refrigerant: R410A & R134a Objectives > Selection and application of the Daikin Altherma range > Basic installation requirements Internal, external sales, design, selection and application engineers Duration 1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow. Also available at West Suffolk College and PGL Training Trainer Daikin UK technical engineer Programme and system benefits > Renewable energy and market drivers > Air-water heat pump > Overview of MCS design standard > Introduction to heat loss calculations > Selection procedure > Daikin Altherma selection software > System operational parameters > Selection of hot water cylinder > System control options > Field pipework application, refrigerant > Field pipework application, water > Field wiring requirements > Optional accessories including solar connection > Questions and answers Price 75 (ex vat) Including course syllabus and technical data manuals Please bring a portable PC to enable hands on tuition of the Altherma selection software. Daikin UK Training 2014/15 7
Daikin Altherma: low and high temperature systems Advanced service and fault finding including monobloc (DUK-SE11, DUK-SE18 or DUK-SE23 must have been completed prior to attendance) Reference: DUK-SE17 Refrigerant: R410A & R134a Objectives > To cover Daikin Altherma system operational functions, with advanced service and fault finding techniques Service and maintenance engineers Duration 1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow. Also available at West Suffolk College and PGL Training Trainer Daikin UK technical engineer, or regional college lecturer Programme > Covering various product ranges > Inside out of the Hydrobox > Inside out of the condensing unit > Inside out the hot water cylinder > Solar connections and control > Internal pipework. Ref and water > Internal wiring detail > Voltages to be expected > Pressures to be expected > Temperatures to be expected > Advanced operational functions > Operational components > Correct and adverse effects of incorrect field settings > Questions and answers Price 150 (ex vat) Including course syllabus Daikin Altherma: high temperature split systems Installation and commissioning Reference: DUK-SE18 Refrigerant: R410A & R134a Objectives > Installation requirements > Commissioning procedures Installation and commissioning engineers Duration 2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow. Also available at West Suffolk College and PGL Training Trainer Daikin UK technical engineer, or regional college lecturer Programme Day 1 > R22 legislation > Options and technical specifications > Daikin Altherma selection software > Air-water heat pump > Mechanical installation > Electrical installation Day 2 > System water and refrigerant flows > Pre-start up checks and field settings > Use of the remote control interface > Advanced functional overview > Recommended service and maintenance > Fault finding > Questions and answers Price 300 (ex vat) Including course syllabus and technical data manuals 8 Heating and renewables
NEW Daikin Altherma: Flex Type Installation and commissioning Reference: DUK-SE20 Refrigerant: R410A Objectives > Installation requirements > Commissioning procedures Installation and commissioning engineers Duration 2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow Trainer Daikin UK technical engineer Programme Day 1 > R22 legislation > Product specifications > Billing systems field supplied > Capacity index, indoor and outdoor > Installation examples > Main system components > Indoor unit and hot water cylinder > Positioning of the outdoor unit > Refrigerant pipework installation > Pressure test, evacuation and charging Day 2 > Electrical installation > Install, commission and test run > System operational functions > Service codes and programming > General use of the remote controller > Setting the schedule timer > Recommended maintenance Price 300 (ex vat) Including course syllabus and technical data manuals Daikin: Solar Thermal Pressurised and Drainback Product familiarisation Reference: DUK-SE22 Objectives > Introduction to solar thermal energy > Installation requirements Installation and commissioning engineers Duration 1 day. Lunch included. Morning 09.30-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow Trainer Daikin UK technical engineer Programme > Introduction to solar thermal energy > Overview of the product range > Selection and sizing procedures > Solar panel fixing systems > Solar accessories > Integration of Daikin Altherma and Solar Thermal > Integration of Daikin Solar Thermal and Rotex Gas Compact Unit > Basic installation overview > Questions and answers Price 75 (ex vat) Including course syllabus and technical data manuals Please be aware although no pre confirmed course dates are advertised, these courses will run dependant upon regional request. Daikin UK Training 2014/15 9
Daikin Altherma: low temperature monobloc systems Installation and commissioning Reference: DUK-SE23 Refrigerant: R410A Objectives > Installation requirements > Commissioning procedures Installation and commissioning engineers Duration 1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow. Also available at West Suffolk College and PGL Training Trainer Daikin UK technical engineer, or regional college lecturer Programme > Options and technical specifications > Daikin Altherma selection software > Air-water heat pump > Mechanical installation > Electrical installation > System flow rates and volumes > Use of remote controller interface > Advanced functional overview > Recommended maintenance > Basic fault finding > Questions and answers Price 150 (ex vat) Including course syllabus and technical data manuals Daikin Altherma hybrid heat pump New opportunities in residential heating! There is a growing demand from home owners to replace heating systems, especially replacing of gas boilers, with more efficient, more cost effective and more environmentally friendly systems that reduce CO 2 emissions, reduce energy consumption and protect their budget. The answer is the Daikin Altherma hybrid heat pump. For space heating, the Daikin Altherma hybrid heat pump will combine air-to-water heat pump technology by searching for the optimum economical condition for its operation, combining parameters of energy cost (electricity, gas) heat pump efficiency and heat load requirements to deliver up to 35% more heating efficiency, plus major cost savings. For domestic hot water, the Daikin Altherma hybrid heat pump optimises the operation of the most efficient gas condensing boiler. Your benefits > Low running costs for heating and domestic hot water compared to traditional boilers > Low investment cost > Provides sufficient heat in renovation applications > Easy and fast installation Installation and commissioning training options available for this new product range: 1 Day DUK-SE32: Specifically designed for those engineers who have previously attended and fully completed the DUK-SE11. 2 Day DUK-SE37: Specifically designed for those engineers with no previous DUK-SE11 attendance. 10 Heating and renewables
NEW Daikin Altherma hybrid heat pump systems (DUK-SE11 must have been completed prior to attendance) Reference: DUK-SE32 Refrigerant: R410A Objectives > Installation requirements > Commissioning procedures Installation and commissioning engineers Duration 1 day. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow Trainer Daikin UK technical engineer Programme > Daikin Website, extranet and product assistance > Daikin Altherma hybrid heat pump product introduction > Microgeneration Certification Scheme > Options and technical specifications > Overview of installation requirements > Electrical installation > Pre start up checks > Boiler commissioning > Controller settings and quick wizard > Boiler controller > Maintenance > Fault codes > Questions and answers Price 150 (ex vat) Including course syllabus and technical data manuals NEW Daikin Altherma hybrid heat pump systems Reference: DUK-SE37 Refrigerant: R410A Objectives > Installation requirements > Commissioning procedures Installation and commissioning engineers Duration 2 days. Lunch included. Morning 09.00-12.30 Afternoon 13.15-16.30 Available locations Bristol, Woking, Birmingham, Manchester, Glasgow Trainer Daikin UK technical engineer Programme Day 1 > Daikin website, extranet and product assistance > Refrigeration, gas, water and electrical legislation > Daikin Altherma hybrid heat pump product introduction > Microgeneration Certification Scheme > Daikin Altherma heat loss calculation tools and selection software > Options and technical specifications > Installation of refrigerant pipework > Installation of the heat pump section > Installation of the gas boiler section > Water pipework and mechanical connections > System flow rates and water volumes Day 2 > Electrical installation > Pre start up checks > Boiler commissioning > Pre start up field settings and quick wizard > Boiler controller > Maintenance > Boiler fault codes > Questions and answers Price 300 (ex vat) Including course syllabus and technical data manuals Daikin UK Training 2014/15 11
EAL industry accredited heating courses Daikin UK are pleased to be able to offer courses in association with our partner colleges that will provide the learner with industry qualifications that count towards MCS (Microgeneration Certification Scheme), whilst at the same time providing the necessary knowledge to install Daikin Altherma products. This provides the advantage of combining courses into one that will enable the learner to: > Achieve Industry qualifications that count towards MCS accreditation > Receive the training required to purchase, install and maintain Daikin Altherma products > Save time required for training > Provide a lower overall cost of training. Courses are accredited by EAL (Excellence, Achievement and Learning Ltd) EAL is the specialist, employer recognised awarding organisation for the engineering, manufacturing, building services and related sectors. Daikin have worked with EAL to obtain official accreditation of bespoke courses that use the core content of QCF qualifications and are based around Daikin Altherma heat pump products. These courses qualify the learner to achieve qualifications that are listed on the Ofqual register database forming part of the Environmental Technologies pathway towards MCS registration. Courses are available at selected regional technical colleges College of North West London, Dudley Energy Training Hub, and PGL Training in Exeter. Daikin accredited courses provide the choice of obtaining qualification based around a combined course covering the Altherma split and monobloc products, or based on the monobloc product alone. Regardless of the product base chosen there are two Ofqual qualifications that can be achieved. > QCF600/5249/1 -EAL Level 3 Installation of Heat Pump Systems > QCF600/5253/3 -EAL Level 3 Installation and Maintenance of Heat Pump Systems. The most economic and recommended solution is to take the full Installation and Maintenance path, but if required it is possible to take the separate Daikin Service and Inspection course (DUK CO5) at a later date following the installation courses to gain the full qualification. The EAL QCF qualifications are aligned with the National Occupational Standards (NOS) recognised by MCS for the purposes of proving specific competencies. For more information or to apply for one of the listed EAL Industry accredited heating courses, please contact your nearest college directly. 12 Heating and renewables
Prerequisites All DUK-CO reference courses: N/SVQ Level 2 or 3 plumbing or heating and ventilation, or oil fired system, or gas installation, plus G3 unvented systems, water regulations/water byelaws (WRAS), energy efficiency C&G 6084. Please note* This list is not exhaustive, please contact your nearest college for further details. DUK-CO5: Previous completion of DUK-CO1/600/5249/1, or the DUK-CO3/600/5249/1. Daikin primary course ref Daikin supplementary course ref Ofqual register accreditation achieved DUK-CO1/600/5249/1 3 Days QCF 600/5249/1 EAL Level 3 Heat pump installation, commission and handover. Altherma monobloc only DUK-CO5 2 Days Installation of heat pump systems (non-refrigerant circuits) DUK-CO2/600/5253/3 4 Days Heat pump service & inspection. Altherma monobloc and split QCF 600/5253/3 EAL Level 3 Heat pump installation, commission, handover, service & inspection. Altherma monobloc only Installation and maintenance of heat pump systems (non-refrigerant circuits) DUK-CO3/600/5249/1 4 Days QCF 600/5249/1 EAL Level 3 Heat pump installation, commission and handover. Altherma monobloc and split DUK-CO5 2 Days Installation of heat pump systems (non-refrigerant circuits) DUK-CO4/600/5253/3 5 Days Heat pump service & inspection. Altherma monobloc and split QCF 600/5253/3 EAL Level 3 Heat pump installation, commission, handover, service & inspection. Altherma monobloc and split Installation and maintenance of heat pump systems (non-refrigerant circuits) RHI voucher scheme (Renewable Heat Incentive training support scheme) DECC have recently launched 500,000 of funding to support training on heat based renewable technologies, to help installer companies in England access the training they need to engage with renewable heating technologies prior the launch of the domestic RHI in Spring 2014. The short course vouchers are aimed at existing plumbing and heating engineers in order to encourage them to undertake training in renewable heating technologies. This part of the scheme will deliver vouchers worth 75% of the cost of the training and assessment, up to a maximum of 500 per voucher (including VAT). A maximum of five vouchers per company will be available. To be eligible the company must be a small to medium-sized enterprise (SME). Daikin Airconditioning UK has a range of EAL accredited courses (DUK-CO1 to DUK-CO5) that are eligible for the RHI Training Support scheme. Daikin UK Training 2014/15 13
Daikin UK & EAL industry accredited QCF Level 3 (National Occupational Standard aligned) course contents covered: Course reference Industry accredited course contents DUK-CO1 DUK-CO2 DUK-CO3 DUK-CO4 DUK-CO5 Generic: Air and ground source heat pump contents covered Knowledge unit for installation of air source heat pump environmental technologies 4 4 4 4 8 Practical unit for installation of air source heat pump environmental technologies 4 4 4 4 8 Knowledge unit for repair and maintenance of air source heat pump technologies 8 4 8 4 4 Practical unit for repair and maintenance of air source heat pump technologies 8 4 8 4 4 Knowledge unit for installation of ground source heat pump 4 4 4 4 8 Practical unit for installation of ground source heat pump environmental technologies 4 4 4 4 8 Knowledge unit for repair and maintenance of ground source heat pump technologies 8 4 8 4 4 Practical unit for repair and maintenance of ground source heat pump technologies 8 4 8 4 4 Daikin Altherma product specific units include Knowledge unit for installation of Daikin air-water heat pump environmental technologies 4 4 4 4 8 Practical unit for installation of Daikin air-water heat pump environmental technologies 4 4 4 4 8 Knowledge unit for repair and maintenance of Daikin air-water heat pump technologies 8 4 8 4 4 Practical unit for repair and maintenance of Daikin air-water heat pump technologies 8 4 8 4 4 Daikin Altherma product specific contents include Product introduction 4 4 4 4 8 Options and technical specifications 4 4 4 4 8 Daikin Altherma selection software 4 4 4 4 8 Mechanical installation 4 4 4 4 8 Electrical installation 4 4 4 4 8 System water and refrigerant flows 4 4 4 4 8 Pre-start up checks and field settings 4 4 4 4 8 Use of the remote control interface 4 4 4 4 8 Advanced functional overview 8 4 8 4 4 Recommended service and maintenance 4 4 4 4 4 Fault finding 8 4 8 4 4 Solar connections and control 4 4 4 4 8 Inside out of the Hydrobox 8 4 8 4 4 Inside out of the condensing unit 8 4 8 4 4 Inside out of the hot water cylinder 8 4 8 4 4 Internal pipework, refrigerant and water 4 4 4 4 4 Internal wiring detail 4 4 4 4 4 Operational component explanation 4 4 4 4 4 Correct and adverse effects of incorrect field settings 8 4 8 4 4 Includes online examination & EAL industry accredited certification for successful candidates 4 4 4 4 4 Regional technical college locations available to attend College of North West London 4 4 4 4 4 Dudley Energy Training Hub 4 4 4 4 4 PGL Training 4 4 4 4 4 Course duration 3 Days 4 Days 4 Days 5 Days 2 Days Cost per attendee per course (ex vat) including registration and certification fees From 540.00 From 720.00 From 720.00 From 900.00 From 360.00 14 Heating and renewables
Industry related refrigeration courses Daikin UK offers product training through established in-house training centres, via short courses and on-site training. However, as the heating market in the UK continues to grow, the next generation of engineers need to be trained on refrigerant handling skills. To achieve this, there needs to be active support between training providers and the industry. Regional college providers offer structured courses to train engineers from the beginning. They also offer specialised short courses, for more experienced engineers. However, they also recognise the need for assistance from the manufacturers, to enhance their facilities with modern technology, hence our developed regional working relationship. The following courses are available for new heat pump engineers to learn the principles of refrigerant handling and pipe work installations. Daikin UK Training 2014/15 15
Commercial Pipe Work and Brazing up to 7/8 Pipe Work Those with proven practical experience, requiring theoretical and practical tuition on the industry related procedures required for the fabrication of refrigerant copper pipe work. Certification CITB/BRA Commercial Brazing Standards Example of contents > Health and safety issues > Introduction to brazing > Brazing equipment preparation > Correct ignition procedures > Practical brazing of pipe work Reference: DUK-IRS01 Duration: 1 day Attendees: 6-10 engineers F-Gas (category 1) City & Guilds 2079 Reference: DUK-IRS02 Duration: 2.5 days Attendees: 6-10 engineers Experienced refrigeration and air conditioning engineers. Theoretical and practical tuition will be received on the industry s latest requirements relating to the F-Gas regulations. Certification City & Guilds 2079 Example of contents > Understanding of environmental impact of F-Gas > Identifying condition and state of refrigerant > Attaching gauge manifold to a split system running, pump down and removal > Leak testing > Monitoring system performance for indication of refrigerant charge & possible shortage > Equipment record keeping requirements Refrigerant Safe Handling, CITB Commercial Pipe Work Brazing and Split Air Conditioner Installation Practices Reference: DUK-IRS03 Duration: 3 days Attendees: 6-10 engineers Heating engineers as a first stage introduction to the refrigeration and air conditioning installation and operational related aspects, including brazing and refrigerant safe handling. Certification CITB/BRA Commercial Brazing Standards Example of contents > Introduction to refrigeration and air conditioning > Understanding of environmental impact of F-Gas > Basic refrigeration cycle > Various tools and pipe connecting techniques > RAC installation practice > Pressure testing > Evacuation > Refrigerant charging > Leak testing > Equipment record keeping requirements F-Gas (category 1) City & Guilds 2079, Including an Introduction to Refrigerant Pipe Work Installation Practices Reference: DUK-IRS04 Duration: 5.5 days Attendees: 6-10 engineers Heating engineers who have previously successfully completed the DUK-IRS03 refrigeration and air conditioning introductory course, now wishing to further expand their knowledge with the opportunity to obtain C&G 2079 certification. Certification City & Guilds 2079 & CITB/BRA Commercial Brazing Standards Example of contents > Basic thermodynamics > Identifying condition and state of refrigerant > Pressure enthalpy chart > RAC installation practice > Complete brazed test piece to be fitted to refrigeration plant > Pressure testing > RAC maintenance and fault finding > Refrigerant recycle and recovery 16 Heating and renewables
Open weekdays 09.00 17.30 T: 0845 641 9260 E: training@daikin.co.uk F: 0845 641 9075 www.daikintraining.co.uk
your comfort. our world. FSC Carbon Balanced Paper Visit www.eca.gov.uk/etl and type Daikin in the quick search box for details of the latest ECA qualifying Daikin units 011-7S1016F Daikin units comply with the European regulations that guarantee the safety of the product. Daikin Europe N.V. participates in the Eurovent Certification programme for Air conditioners (AC), Liquid Chilling Packages (LCP), Air handling units (AHU) and Fan coil units (FCU), Check ongoing validity of certificate online: www.eurovent-certification.com or using: www.certiflash.com Daikin products are distributed by: The present leaflet is drawn up by way of information only and does not constitute an offer binding upon Daikin UK. Daikin UK has compiled the content of this leaflet to the best of its knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin UK explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this leaflet. All content is copyrighted by Daikin UK. UKEPLEN14-912 / 03.14 / DesignHQ. Copyright 2014 Daikin Printed in the UK on FSC certified paper from sustainable sources. Training Department Daikin Airconditioning UK Limited Maple House Brotherswood Court Great Park Road Almondsbury Bristol BS32 4QW Tel 0845 64 19 260 Fax 0845 64 19 075 daikin.co.uk Dedicated Heating Line: 0845 641 9070 Scotland Region 0845 641 9330 Northern Region 0845 641 9340 Midlands Region 0845 641 9370 Western Region 0845 641 9320 North London 0845 641 9360 South London 0845 641 9355