No. S8351 S8351 External Bluetooth module for mz series transmitter OPERATING INSTRUCTION Prior to use, please read this manual thoroughly. Keep this manual in a convenient place for quick and easy reference.
Contents BEFORE USE SUPPORT AND SERVICE - Customer support - Online Support - A/S Support - Warranty information OPENHOBBY A/S CENTER 1. Product Description 2. External Bluetooth module Installation 3. Android Application 4. Graupner HoTT Meter Viewer 5. Voice Setup 5-1. Warning 5-2. Receiver 5-3. General 5-4. Electric 5-5. Vario 5-6. GPS 5-7. Air ESC 6. Display Setup 6-1. Data unit 6-2. RPM 6-3. Voltage 6-4. Current 6-5. Capacity 7. Monitoring - Receiver - General Air Module - Electric Air Module - Vario Sensor Module - GPS Sensor Module - ESC - Warning Popup - Warning List 8. Safety Approval 9. Environmental protection notesa 3P 3P 3P 3P 3P 3P 3P 4P 4P 5P 5~6P 6P 6P 7P 7P 7~8P 8P 8P 9P 9P 9P 9~10P 10P 10P 11P 11P 11P 12P 12P 13P 13~14P 14P 15P 15P 16~17P 17P 2
BEFORE USE Thank you for your purchasing Graupner S8351 External Bluetooth module. This product could be used for Graupner HoTT 2.4GHz mz series Transmitter. And it is NOT compatible with the other branded 2.4GHz Transmitter. Prior to use this product, please read this manual for correct use and operation. Otherwise, this product would be damaged and influenced in lifespan. Thank you customers, we will do our best for RC products quality and R&D. SUPPORT AND SERVICE Customer support We are happy to assist you with any question by e-mail or phone. Customer service hours are from 9 am to 5 pm PST (Pacific Standard Time) during the workweek, Monday through Friday. E-mailed questions will be answered as soon as possible Online Support Please visit us at www.openhobbby.com, to stay up to date with the latest software, firmware and product information. A/S Support During the warranty period, we can repair this product at no cost in the event that it has become faulty under normal operating conditions. For non-functional products that are past the expiration date of the warranty or have been improperly used, we would be happy to repair this product for an appropriate amount of cost to the consumer. Warranty information Refer to the WARRANTY CARD in the Package OPENHOBBY A/S CENTER 3245 University Ave, Suite 1520, San Diego, CA 92104, United States of America Phone: +1 855-5-RCisHoTT ( +1 855-572-4746) Fax: +1 855-546-0350 E-mail: service@openhobby.com 2014 Graupner USA OPENHOBBY LLC. The HoTT trademark is used with permission of SJ Inc. 4386066 3
1. Product Description This Graupner S8351 External Bluetooth module is used in connecting with Graupner HoTT mz series Transmitter. And the communication could be with Android smart phone by Bluetooth. Therefore, various telemetry data could be transferred to the smart phone from the TX in real-time. These real-time telemetry data could be supplied in voice and graphic and also could be edited by the user for the required data. 2. External Bluetooth module Installation Regarding the Graupner HoTT mz-10, mz-12, mz-18 and mz-24 Transmitters, the S8351 External Bluetooth module could be connected at the data input as the below photo. Regarding the Graupner HoTT mz-10, mz-18 and mz-24 could be used without any additional configuration. mz-10, mz-12 mz-18, mz-24 As for the mz-12, you could configure the related function on the TX program. At the DATA sele item of Basic sett function, please change Telemetry to BLUETOOTH. basic sett. fail safe train er info. disp. Voice volume 3 Beep volume 5 Jack select EAR DATA sele. BLUETOOTH Sensor Units Metric 4
3. Android Application The formal name of Graupner Android Application is Graupner HoTT Meter Viewer. At the play store of smart phone, please search Graupner and download the Graupner HoTT Meter Viewer. https://play.google.com/store/apps/details?id=com.sj.graupnersj_hott_viewer 4. Graupner HoTT Meter Viewer When you download the application, the initial screen will be presented. Please tap the Bluetooth Setup button and the screen will be moved to the setting mode. To make the Bluetooth module activated, please tap the Bluetooth on and there will be Bluetooth connecting message. Please tap connect and it will be activated. Please tap Bluetooth Device Search and there will be Bluetooth device list after 10 15 seconds. And please designate Graupner HoTT BT2 and tap Connect. For the initial connection, there will be required for the PIN number. Then, press 0000 or 1234. After configuration, tap Setup Finish and the screen will be move to the main Manu page. 5
2 5. Voice Setup Voice Setup is for the editing of voice guide function. At the main page, please tap Voice Setup for the configuration. 5-1. Warning The first configuration is for Warning Display Enable. Please check this item for activation. 6
5-2. Receiver This is for editing function of Receiver Telemetry Voice guide. There is an entire clear function and each item could be picked - the each RF Strength, Temperature, Voltage, Low Volte, etc. Please tap Receiver from the top side and it could be moved to the configuration page. Please check the items for the activation. 5-3. General This is for editing function of General Air module Voice guide. There is an entire clear function and each item could be picked - Cell 01~Cell 06, Sensor1 Volt, Sensor2 Volt, Sensor1 Temp, Sensor2 Temp, Altitude, Current, Input Volt, Capacity, RPM, etc. Please tap General from the top side and it could be moved to the configuration page. Please check the items for the activation. 5-4. Electric This is for editing function of Electric Air module Voice guide. There is an entire clear function and each item could be picked - Cell 01~Cell 14, Sensor1 Volt, Sensor2 Volt, Sensor1 Temp, Sensor2 Temp, Altitude, Current, Input Volt, Capacity, etc. Please tap Electric from the top side and it could be moved to the configuration page. Please check the items for the activation. 7
5-5. Vario This is for editing function of Vario module Voice guide. There is an entire clear function and each item could be picked - Altitude, Max Altitude, Min Altitude, etc. Please tap Vario from the top side and it could be moved to the configuration page. Please check the items for the activation. 5-6. GPS This is for editing function of GPS module Voice guide. There is an entire clear function and each item could be picked - Speed, Altitude, Distance, Direction, etc. Please tap GPS from the top side and it could be moved to the configuration page. Please check the items for the activation. 8
5-7. Air ESC This is for editing function of Brushless Control +T ESC Voice guide. There is an entire clear function and each item could be picked - RPM, Current, Voltage, Capacity, etc. Please tap Air ESC from the top side and it could be moved to the configuration page. Please check the items for the activation. 6. Display Setup This is for editing function of standard units of Graupner HoTT Meter Viewer Data. 6-1. Data unit At the main page, tap Display Setup and the screen will be moved to the configuration page for the first function of Data unit. This is for unit configuration of Graupner HoTT Meter Viewer - Metric(, m, km) or English(, ft, mile). 6-2. RPM This is for RPM unit configuration for the related module - 0~10,000, 0~20,000, 0~50,000 and 0~100,000. Please tap RPM from the top side and it could be moved to the configuration page. 9
6-3. Voltage This is for Voltage unit configuration for the related module - 0~20V, 0~40V and 0~80V. Please tap Voltage from the top side and it could be moved to the configuration page. 6-4. Current This is for Current unit configuration for the related module - 0~10A, 0~25A, 0~50A, 0~100A, 0~200A and 0~300A. Please tap Current from the top side and it could be moved to the configuration page. 10
6-5. Capacity This is for Current unit configuration for the related module - 0~2500mAh, 0~5000mAh, 0~7500mAh, 0~10000mAh, 0~20000mAh and 0~30000mAh. Please tap Capacity from the top side and it could be moved to the configuration page. 7. Monitoring This is for review the data of Graupner HoTT Meter Viewer by graph, gauge and map. At the related screen, the voice guide function shall be activated. Moving the smart phone screen, all data of sensors and modules could be monitored. The screens for each device are following. Receiver 11
General Air Module Electric Air Module 12
Vario Sensor Module GPS Sensor Module If you move this screen up and down, it will be moved to the screen of Google Map. 13
+ -- ESC 14
Warning Popup Warning List When you double click the Warning Popup screen, there will be warning list during flying on the screen as below. 15
8. Safety Approval DECLARATION OF CONFORMITY We hereby declare that the flowing product Product: External Bluetooth module Confirms with the essential protective requirements as laid down in the directive for harmonizing the statutory directives of the member states concerning electro-magnetic interference The applicant may issue a DECLARATION of CONFIRMITY and apply the CE marking in accordance with European Union Rules - EN300328 V1.7.1:2006 - EN301489-17 V.1.2.1: 2002 FCC Information Product: External Bluetooth module - FCC ID : QOQWT12 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/tv technician for help. 16
FCC radiation exposure statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. KC Information Product: External Bluetooth module (This product is certified and registered from Korean National Radio Research Agency.) - KCC-CRM-BGT-WT12-A Caution - This equipment s aerial must be at least 20 cm from any person when the system is in use. We therefore do not recommend using the equipment at a closer range than 20cm. - Ensure that no other transmitter is closer than 20cm from your equipment, in order to avoid adverse effects on the system s electrical characteristics and radiation pattern. - The radio control system should not be operated until the Country setting has been set correctly at the transmitter. This is essential in order to fulfill the requirements of various directives - FCC, ETSI, CE, KC and etc. Please refer to the instructions for your particular transmitter and receiver for details of this procedure. - Check all working systems and carry out at least one full range check on the ground before every flight, in order to show up any errors in the system and the models programming. - Never make any changes to the programming of the transmitter or receiver whilst operating a model. 9. Environmental protection notesa This product must not be disposed of with other waste. Instead, it is the user s responsibility to their waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or where you purchased the produce 17