Product Guide Water and Sewer. Pipes and Fittings

Product Guide Water and Sewer Pipes and Fittings

A World of Choice Saint-Gobain PAM UK is is the the UK s UK s leading leading supplier supplier of of ductile ductile iron iron pipe pipe systems systems for potable for potable water and water sewerage and sewerage applications. applications. Saint-Gobain PAM UK is part of the Saint-Gobain Pipe Division, a global company with a Saint-Gobain presence Europe, PAM UK Asia, is part South of America the Saint-Gobain and the Far Pipe East. Division, The pipe a division global company has over 10600 with a employees presence in and Europe, sells products Asia, South in 120 America different and countries the Far with East. over The,000km pipe division of ductile has over iron 9000 pipes employees, being installed and worldwide sells product per in year. 120 different countries with approximately 100,000km The Saint-Gobain of ductile Pipe iron Division pipes is being part of installed the Saint-Gobain worldwide Group, per year. one of the world s leading multi-nationals, which currently employs over 209,000 people in 59 countries and The over Saint-Gobain 1200 consolidated Pipe Division companies. is part of the Saint-Gobain Group, one of the world s leading Everyone multi-nationals, Saint-Gobain which PAM UK currently is dedicated employs to meeting over 180,000 customer people expectations. in 48 countries We and encourage over 1200 open consolidated communication companies. between staff, customers and related organisations to make a positive impact on the future of the marketplace and help improve the quality of life for people worldwide. Everyone at Saint-Gobain PAM UK is dedicated to meeting customer expectations. We encourage UK customers open benefit communication from the global between network staff, of the customers Pipe Division and related through organisations our long term to commitment to improve and develop innovative products and processes. We achieve this make a positive impact on the future of the marketplace and help improve the quality through continual investment in Research and Development on a global scale. In excess of life 10million for people per worldwide. annum is spent on R&D programmes worldwide, meaning an unrivalled product range of next-generation, ductile iron pipe systems being constantly developed UK and customers delivered to benefit the UK from market. the global network of the Pipe Division through our long term Sustainable commitment development to improve lies at and the develop heart of Saint-Gobain s innovative products corporate and culture. processes. We achieve this through continual investment in Research and Development on a global Its state-of-the art technologies and focus on research and development have enabled us scale. to consistently In excess provide of 10million our customers per annum with is quality, spentsustainable, on R&D programmes reliable and worldwide, ergonomic meaning solutions. an unrivalled product range of next-generation, ductile iron pipe systems being Water constantly and sewerage developed pipelines and are delivered infrastructures to the created UK market. to last for several generations. Sustainable development depends on long lasting rather that disposable installations. Saint-Gobain PAM UK has taken on board these principles and works to provide effective For solutions further for information the environment Saint-Gobain PAM UK visit www.saint-gobain-pam.co.uk For further information on Saint-Gobain PAM UK visit www.saint-gobain-pam.co.uk

Contents Contents Inroduction Introduction Inroduction Section 1 Section 1 Section 2 Section 2 Section 3 Section 3 Section 4 Section 4 Section 5 Section 5 Ordering Information.................. 2 Full Project Life Support Ordering Information.................. 2 Technical Services...................... 8 PipeSpec Design Software.............. 8 PAMCAD Design Software.............. 8 Technical Drawing Take-off Services Service...................... 89 PipeSpec Design Software.............. 8 PAMCAD Design Software.............. 8 Drawing Take-off Service............... 9 Full Project Life Support Product Range Key Dimensions - Push-fit............. 12 Key Dimensions - Flanged............. 13 Product Range..................... 18-57 Key Dimensions - Push-fit............. 12 Key Dimensions - Flanged............. 13 Product Pipes and Range. Fittings...14-65.................... 18-57 Product Range Joints Jointing Systems...................... 60 Rapid Joint........................... 60 Rapid Joint Specification.............. 61 Anchored Jointing Systems... Solutions..................... 68 60 63 Rapid Blutop Anchor Joint.............................. 68 63 60 Rapid Mechanical Joint... Specification..................... 69 61 65 Anchored Solutions solutions...................... 72 63 Rapid Blutop Anchor Vi Joint............................ 72 63 Rapid Vi Mechanical Joint........................ 73 65 Joints Pipe Lining Pipe Linings.......................... 76 Potable Water........................ 76 Standard Offer........................ 77 Special Pipe Linings... Requirements.......................... 86 78 76 Potable Sewerage Water Pipes... Water........................ 86 76 78 Standard Offer........................ 77 Special Requirements................. 78 Sewerage Pipes....................... 78 Pipe Lining Pipe Coating External Coating......................... 94 84 PAM Blutop/Natural/Integral Plus... Plus............. 96 84 Zinc/Aluminium Supplementary Coating Alloy... Systems................. 99 87 External Supplementary Coating Coat.... Systems................... 89 84 PAM Zinc + Natural/Integral a Topcoat..... Plus.................. 84 89 Zinc/Aluminium Alloy................. 87 Supplementary Coat Systems.......... 89 Zinc + a Topcoat...................... 89 Pipe Coating Ductile Iron - The Material of Choice.... 3 Ductile Iron - The Material of Choice.... 3 Technical Support Helpline............. 9 Induct Plus............................ 9 Soil Surveys........................... 10 Technical Quality Assurance Support Helpline.................... 10. 9 Induct Plus............................ 9 Soil Surveys........................... 10 Quality Assurance.................... 10 Valves & Accessories.................. 58 Couplings & Adaptors................. 58 Valves & Accessories.................. 58 66 Couplings & Adaptors................. 58 66 Advanced Solutions................... 68 Universal Rapid Anchor............... 68 Universal Rapid Locked................ 69 Advanced PAMLOCK Universal Rapid Solutions Joints Vi.. Joint....................... 75 70 68 Flange Universal Joints Rapid... Ve Anchor.. Joint....................... 76 68 71 Universal Adjustable PAMLOCK Rapid Joint... Flanges. Locked................... 78 69 74 PAMLOCK Rapid Ve Joint... Joints...................... 79 70 Flange Joints Joint............................ 81 71 Adjustable Flanges...................... 83 74 Resistance to Septic Attack............ 79 Resistance to Chemical Attack......... 79 Resistance to Abrasion................ 81 Resistance Lining Sewerage Thickness Pipes... to Septic & Condition Attack............ 88 79 82 Resistance Lining Thickness to Chemical & Condition... Attack......... 92 79 Resistance to Abrasion................ 81 Lining Thickness & Condition.......... 82 Special Applications.................... 100. 90 Zinc Installation + PE Sleeving. & Handling...................... 107. 90 Zinc + Tape Wrap..................... 90 Special Installation Applications. & Handling.................. 90 92 Zinc Epoxy + Coated PE Sleeving. Fittings.... DN60-2000................ 92 90 Zinc + Tape Wrap..................... 90 Installation & Handling............... 92 Epoxy Coated Fittings DN60-2000..... 92 1 1

Ordering Information Terms & Conditions In all cases the Saint-Gobain PAM PAM UK UK Standard Conditions Of Of Sale Sale (Home) or or Saint-Gobain PAM PAM UK UK Standard Conditions Of Sale (Export) apply. Conditions Of Sale (Export) apply. Technical Information For any technical queries please contact Saint-Gobain PAM UK UK Technical Sales Department Tel: 0115 930 0700. 0650/0700. Contact the brochure hotline: Tel: 0800 028 0282134 2134 Fax: 0115 932 9329513 9513 Email: brochures.uk.pam@saintgobain.com The products illustrated within this this guide are are directly available from from Saint-Gobain PAM PAM UK or from a network of of distributors and and stockists across across the the UK and UK Ireland. Ireland. Quotations and order information within the the UK UK and and Ireland Ireland can can be obtained be obtained from from the the following number: Distributor Sales Enquiries: Sales Enquiries: Tel: 0115 Tel: 930 0115 0630 930 0681 Fax: 0115 Fax: 930 0115 0648 930 0648 Overseas For quotations and order information outside the the UK UK and Ireland please contact: Tel: +44 Tel: 115 +44 930115 0645 930 0766 Fax: +44 Fax: 115 +44 989115 8011 944 04 2 2

Ductile Iron The Material of Choice Saint-Gobain PAM UK offers the most comprehensive range of ductile iron pipe systems for use in both potable water and sewerage application in the UK. Being at the forefront of innovation means that its customers continuously receive state-of-theart products and top class services. At the same time all products and facilities are subject to stringent quality controls and conform to relevant BS, EN and ISO standards. What is Ductile Iron? Ductile Iron is an iron/carbon/silicon alloy. When magnesium is added to the molten iron the graphite forms in spheres rather than in flakes. This transformation virtually eliminates brittleness and produces a strong, ductile material. Strength of Ductile Iron Mechanical Properties Ductile iron displays excellent mechanical properties, such as high resistance to tensile stresses and impact loads, high elongation and high yield strength. These properties make the material the most universally applicable pipeline material today. Deflection of a small DN pipe under external loading. Minimum elongation : Pipes: uti DN1000 10% >DN1000 7% Fittings: 5% Minimum ultimate Tensile Strength: 420 MN/m 2 Modulus of Elasticity: 170 GN/m 2 Factor of Safety (1) Pressure (bars) Pressure (bars) 3.0 2.5 2.0 1.5 1.0 0.5 600 500 0 300 Measured bursting pressure Pipes 200 Working 100 0 pressure 200 0 600 800 1000 1200 10 00 DN 600 500 0 300 200 100 Working pressure Why Choose (1) Combined pressures plus external load 0 Ductile PVC PE Steel GRP Iron Measured bursting pressure Fittings Ductile Iron? Ductile Iron is the most versatile pipe material today offering solutions to specific pipeline demands whether determined by the application or the installation requirements. Ductile iron can be used above or below ground, is safe to specify even if future demands change from specifications today. Structural Design: Ductile Iron Guarantees Safety As a result of the ductility of the material, which gives a high capacity for absorbing work or energy, Saint-Gobain ductile iron pipes and fittings have a high safety margin, allowing the opportunity to operate at up-rated pressures in the future. The inherent structural strength of the pipe guarantees durability and reliability for long term service. The high factor of safety of ductile iron gives continued performance even if future demands change, for example through increased usage from housing developments. The inherent material strength of ductile iron compensates for unforeseen environmental changes, for example change of land use or ground settlement. Easy to design and specify Excellent resistance to second comer damage No long term reduction in pipe stiffness Ductile iron takes the risk out of pipeline design 0 100 150 200 0 300 350 0 DN 3 3

High strength and stiffness Ductile iron is suitable for installation in open fields or high traffic load areas and can be laid at a variety of depths. The high material strength minimises the need for imported bedding and surround, hence minimising the impact on the environment. Can be laid in narrow and/or shallow trenches Can be laid at a wide range of depths with no detrimental effect on the performance of the pipe Minimises risk due to unforeseen site hazards, such as second-comer damage Maximum Depth of Cover 8.1 8.2 8.4 8.5 8.6 8.7 8.8 8.9 DN300 DN0 DN500 DN600 DN700-800 DN900-1000 DN1200-10 DN00-2000 10.6 DN200 14.6 DN150 24.7 m DN100 Pipe: Class for DN80-300, class 30 for DN350-600 and class Pipe: Class for DN80-0, K9 for DN450-2000 for DN700-2000 Embedment: Embedment: coarse coarse grained grained soil with soil less with than less 12% than fines 12% fines Modulus Modulus of soil of reaction: soil reaction: 7MN/m2 7MN/m 2 4 4

) Reducing Failure Rates: Ductile Iron assured long term reliability Reducing Failure Rates: Ductile Iron assured long term Through a continual reliability programme of developments and innovations the failure rates of ductile iron systems consistently reduce compared to alternative materials. Reliable long term solution No. of Failures / (km x year) No. of Failures / (km x year) Through a continual programme of developments and innovations the failure rates of ductile iron systems consistently reduce compared to alternative materials. Reliable long term solution Reducing Can adapt to Failure future changes Rates: Can adapt to future changes in external Ductile in external load Iron assured long term load reliability No. of failures by material type (per km per year) No. of failures by material type (per km per year) Through a continual programme of developments and innovations the failure rates of 0..35 ductile iron systems consistently reduce compared to alternative materials. 0..35 0.3 Reliable long term solution 0. 0.3 Can adapt to future changes in external load 0.2 0. 0.15 No. of failures by material type (per km per year) 0.2 0.1 0..35 0.05 0.15 0.3 0 Grey Iron Ductile Iron Steel PE 0.1 0. KEY 1997 Source: DGVW Study 0.05 0.2 2000 0 0.15 Installation Grey Iron & Testing: Trunk Ductile Mains Install Iron Average Test Failure and Rates Steel Forget PE No. of Failures / (km x year) Saint-Gobain PAM UK offers pipe systems which have well proven and highly 0.1 KEY engineered 1 jointing 1997 solutions. These jointing solutions are able to withstand the rigours of installation, testing and provide long term reliability once in service. Source: DGVW Study 118.3 120 0.05 The Rapid push-fit 2000 joint is simple and robust and provides high flexibility in both 100 application and installation Failure Rates (Nr per 1000Km per annum Simple jointing techniques, for easy installation 0 80 68.5 69 Testing ductile iron pipe systems is simple, once passed there is no need to repeat 60Grey Iron Ductile Iron Steel PE test at a later time. Install, Test and Forget, requires less supervision on-site. 37.2 38.2 Installation Jointing & solutions Testing: which allows Install installation whatever Test the and weather Forget conditions 30.1 KEY 1997 No specialist equipment required Saint-Gobain PAM 20 Source: DGVW Study UK offers pipe systems which have well proven and highly Capable of angular deflection and axial withdrawal, providing opportunity to reduce engineered jointing the 0number solutions. of 2000 fittings These required. jointing solutions are able to withstand the DI CI Steel PE PVC GRP rigours of installation, Caters for unforeseen testing and ground provide movements long term reliability once in service. Pipe Material Group Source: UKWIR Report 09/WM/08/39 The Rapid push-fit joint is simple and robust and provides high flexibility in both application and installation Installation & Testing: Install, Test and Forget Simple jointing techniques, for easy installation Saint-Gobain PAM UK offers pipe systems which have well proven and highly Testing ductile iron pipe systems is simple, once passed there is no need to 5 engineered jointing solutions. These jointing solutions are able to withstand the repeat rigours test at of a installation, later time. Install, testing Test and and provide Forget, long requires term reliability less supervision once in on-site. service. Jointing The Rapid solutions push-fit which joint is allows simple installation and robust whatever and provides the weather high flexibility conditions in both No application specialist and equipment installation required Capable Simple jointing of angular techniques, deflection for and easy axial installation withdrawal, providing opportunity to reduce the Testing number ductile of fittings iron pipe required. systems is simple, once passed there is no need to repeat Caters test for a later unforeseen time. Install, ground Test movements and Forget, requires less supervision on-site. Jointing solutions which allows installation whatever the weather conditions No specialist equipment required Capable of angular deflection and axial withdrawal, providing opportunity to reduce the number of fittings required. Caters for unforeseen ground movements 5 5

Hydraulic Flow: Ductile Iron gives constant performance The nominal bore of ductile iron pipe remains constant regardless of pressure requirements. Ductile iron pipe internal bore is clear: for example DN200 = 200mm internal bore, regardless of pressure required. Hydraulic flow characteristics are not altered by pressure increases or decreases An increase in working pressure does not mean an increase in diameter requirement Pressure Capability: Ductile Iron offers the solution whatever the pressure Saint-Gobain PAM UK water & sewer pipe systems are designed to give long term performance whatever the pressure requirements. Ductile Iron systems cover a wide spectrum of pressure requirements Ability to cope with increases in main pressure requirement Simple to specify Soil Conditions: Ductile Iron offers advance technical solutions Saint-Gobain pipe systems are designed to cope with the most aggressive of soil conditions whilst offering cost effective solutions. Revolutionary zinc/aluminium alloy coating system, available on on PAM Blutop, Natural Natural and and PAM Integral Plus: can can be be used in over 90% of of UK soils. For very aggressive ground conditions Saint-Gobain PAM UK offers solutions which are optimised for Brownfield or contaminated sites. Complete range of Epoxy coated fittings, suitable for use in all conditions Easy to specify, design, lay and test Simple to joint, means high speed of installation Difficult to get wrong, due to high safety factors Corrosion not an issue Versatile: solutions to meet any requirements INSTALL, TEST & FORGET 6 6

Section 1 Full Project Life Support Full Project Life Support 7 7 7

Section 1: Full Project Life Support Technical Technical Services Services To ensure cost effective To ensure solutions cost Saint-Gobain effective solutions PAM UK Saint-Gobain offers full project PAM UK life offers support full project life support support from early design advice, from soil early surveys design and advice, drawing soil surveys take-offs and to drawing on-site support take-offs and to on-site support and installation certification installation for contractors certification and engineers. for contractors and engineers. Savings Savings Design Phase Savings Savings Savings Savings Savings Savings Savings Savings Design Installation Phase Phase Savings Savings Software Support Tools: PipeSpec PAMCAD Onsite-Support: Induct Plus Logistics Installation Phase Software Support Tools: PipeSpec PAMCAD Technical Support: Technical Support: Drawing Take-Off Drawing Take-Off Optimisation of Design Optimisation of Design Soil Surveys Soil Surveys Telephone Help-line Telephone Help-line Savings Savings Onsite-Support: Induct Plus Logistics PipeSpec Design PipeSpec Software Design Software PipeSpec is a design PipeSpec software is too a design developed software by Saint-Gobain tool developed PAM by UK Saint-Gobain as a supportpam tooluk as a support tool to assist engineers in to the assist design engineers and specification in the design of pipeline and specification schemes. of The pipeline software schemes. The software features five analytical features tools that five can analytical be utilised tools throughout that can be the utilised planning throughout and design the planning and design stages of the project: stages of the project: Hydraulics - Full Pipe Hydraulics - Full Pipe Hydraulics - Part-full Hydraulics Pipe - Part-full Pipe Embedment Embedment Anchorage Anchorage Installed Cost Installed Cost To download a copy of To PipeSpec download free a copy of charge, of PipeSpec visit www.saint-gobain-pam.co.uk. free of charge, visit www.saint-gobain-pam.co.uk. Alternatively a copy of Alternatively the PipeSpec a copy software the can PipeSpec be requested software from can the be Brochure requested from the Brochure Hotline, Tel: 0800 028 Hotline, 2134. Tel: 0800 028 2134. PAMCAD Design PAMCAD Software Design Software To assist engineers and To specifiers assist engineers the creation and specifiers and modification in the creation of a and pipework modification design, of a a pipework design, a complete database of complete water pipeline database products of water is available. pipeline The products software is available. enables The accurate software enables accurate drawings to be produced drawings quickly to and be produced easily by calling quickly up and pipeline easily by components calling up pipeline and components and arranging them on screen. arranging them on screen. PAMCAD is compatible PAMCAD with the is compatible latest version with of the AutoCAD. latest version PAMCAD of features AutoCAD. a floating PAMCAD menu features for easy, a floating efficient for pipework easy, design. efficient design. pipework design. menu for easy, efficient menu Benefits: Benefits: Enables pipe runs to l Enables be drawn pipe quickly runs and to be easily drawn quickly and easily Make-up pipe facility l Make-up pipe facility Use of standard products l Use of to standard minimise products cost and to lead minimise time cost and lead time Automatically allows l Automatically joint gaps allows joint gaps Bill of materials function l Bill of gives materials a clear function list of products gives a clear usedlist of of products used Download PAMCAD free Download of charge PAMCAD at www.saint-gobain-pam.co.uk/watersewer free of charge at www.saint-gobain-pam.co.uk/watersewer Download PAMCAD free of charge at www.saint-gobain-pam.co.uk/watersewer /wscad.cfm. Alternatively /wscad.cfm. a CD-ROM Alternatively is available CD-ROM via our request is available brochure via our tab request on the brochure tab on the /wscad.cfm. Alternatively a CD-ROM is available from the Brochure Hotline, website. website. Tel: 0800 028 2134. 8 8

Drawing Drawing Take-off Take-off Service Service A team A of team experienced of experienced engineers engineers is able is to able carry to out carry drawing out drawing take-offs, take-offs, providing providing a a detailed detailed list of list products of products required. required. The service The service includes includes optimisation optimisation of design of design to ensure to ensure that the that most the cost-effective most cost-effective solution solution is achieved. is achieved. Saint-Gobain Saint-Gobain PAM UK PAM has UK the has facility the facility to accept to accept drawings drawings electronic in electronic format. format. Please Please consider consider the following the following instructions instructions for use for of use this of facility: this facility: All drawings All drawings to be compatible to be compatible with AutoCAD2002/2004 with All drawings All drawings sent to sent relate to relate only to only pipework to pipework for off-take for off-take take-off All drawings All drawings to be clean, to be clean, i.e. drawings i.e. drawings to fill the to fill whole the whole screen screen in a reasonable in a reasonable and and printable printable size size To avoid To delays avoid delays in dealing dealing with requests, with requests, please please ensure ensure that the that relevant the relevant sections sections of of the specification the specification are sent are atsent the at same the time same as time the as drawings, the drawings, either either by mail by or e-mail. or e-mail. Technical Support Support Helpline Helpline A technical A technical support support helpline helpline is available is available to all existing to all existing and potential and potential customers, customers, staffed staffed by an experienced by an experienced team of team engineers of engineers offering offering a broad a broad range range of expertise of expertise and advice and advice on: on: Product Product and material and material compatibility compatibility Installation Installation and testing and testing Embedment Embedment and hydraulic and hydraulic flow calculations flow calculations Regulatory Regulatory requirements requirements Please Please call our call Technical our Technical Sales Department, Sales Department, Tel: 0115 Tel: 930 0115 0650/0700 930 0650/0700 or email or email technical.pipes.uk.pam@saint-gobain.com Induct Induct Plus Plus This scheme, This scheme, offered offered by Saint-Gobain by Saint-Gobain PAM UK, PAM aims UK, to aims give to confidence give confidence to water to water utilities utilities and contractors and contractors that pipes that and pipes fittings and fittings will be will installed be installed effectively effectively and inand in optimum optimum condition. condition. The scheme The scheme offers offers contractors contractors hands-on hands-on training training handling, handling, storing, storing, installing installing and commissioning and commissioning Saint-Gobain Saint-Gobain PAM UK PAM ductile UK ductile iron pipes iron and pipes and fittings. fittings. A process A process of on-site of on-site evaluation evaluation and assessment and assessment of actual of actual installation installation is used is toused to support support the certification the certification of contractors of contractors successfully successfully completing completing the scheme. the scheme. For more For information more information on the installation the installation of ductile of ductile iron pipes, iron pipes, fittings fittings and valves, and valves, please please refer to refer the to Installation the Installation Guide Guide at www.saint-gobain-pipelines.co.uk. at www.saint-gobain-pam.co.uk This set This of set of instructions instructions is based is based on best on practices best practices which which are acknowledged are acknowledged within within the industry. the industry. This guide This guide provides provides clear and clear concise and concise guidance guidance for the for installation the installation of ductile of ductile iron iron pipelines pipelines from delivery from delivery through through to on-site to on-site commissioning commissioning and and designed is designed to ensure to ensure that the that performance the performance of ductile of ductile iron pipes iron and pipes fittings and fittings is not adversely is not adversely affected affected during during installation. installation. Please Please call our call Technical our Technical Sales Department, Sales Department, Tel: 0115 Tel: 930 0115 0650/0700 930 0650/0700 or email or email technical.pipes.uk.pam@saint-gobain.com 9 9 9

FM 129 Section Section 1: 1: Full Full Project Project Life Life Support Soil Soil Quality Quality Surveys Surveys Saint-Gobain PAM UK can Saint-Gobain PAM UK can carry out a detailed soil resistivity assessment survey along along the route proposed the route of a of pipeline. a The re proposed pipeline. The results of the assessment provide a detailed analysis conditions, of ground allowing the m Saint-Gobain PAM UK can carry out a detailed soil assessment along the route conditions, allowing the most appropriate external protection system to be Our specified. soil of a assessment proce proposed pipeline. The results of the assessment provide a detailed analysis of ground Our soil assessment procedure has been awarded independent approval by WRc. conditions, allowing the most appropriate external protection system to be Please specified. contact Technical S Our soil assessment procedure has been awarded independent approval by Please contact Technical Sales Department for more information, Tel: 0115 0650/0700. WRc. 930 0650/0700. Please contact Technical Sales Department for more information, Tel: 0115 930 0650/0700. Assurance Assurance Section 1: Full Project Life Support Soil Quality Surveys Assurance Saint-Gobain PAM UK reg Saint-Gobain PAM UK regards quality as essential to the success of its business. detailed From metallurgical an detailed metallurgical analysis of the molten metal to tight control of coating lining and applications, proced Saint-Gobain PAM UK regards quality as essential to the success of its business. lining applications, procedures have been developed to ensure consistentof high each From quality individual pipe an detailed metallurgical analysis of the molten metal to tight control of coating of each individual pipe and fitting. Additionally, every pipe and fitting is pressure tested and in accordance with lining applications, procedures have been developed to ensure consistent high quality tested in accordance with BS EN 545/BS EN 598. of each individual pipe and fitting. Additionally, every pipe and fitting is pressure The quality-is-key princi tested in accordance with BS EN 545/BS EN 598. The quality-is-key principle applies to every stage of the manufacturing includes: process and includes: The quality-is-key principle applies to every stage of the manufacturing process Validation and of suppliers Validation of suppliers and/or their materials includes: Continuous assessmen Continuous assessment of quality systems On-going monitoring o Validation of suppliers and/or their materials On-going monitoring of product quality Technical support prior Continuous assessment of quality systems Technical support prior to and after sales On-time delivery of pro On-going monitoring of product quality On-time delivery of products and supporting information Technical support prior to and after sales On-time delivery of products and supporting information FM 12908 PT/231/04 10 FM 12908 Compliance with Standards Compliance with Standards 10 PT/231/04 Compliance with Saint-Gobain PAM UK pro Saint-Gobain PAM UK products comply with and are tested according to relevant British, European and Inte British, European and International Standards. All pipes and fittings are manufactured under the quality manage Saint-Gobain PAM UK products comply with and are tested according to relevant under the quality management system BS EN ISO 9001, 2000. British, European and International Standards. All pipes and fittings are manufactured All Saint-Gobain PAM UK under the quality management system BS EN ISO 9001, 2000. All Saint-Gobain PAM UK ductile iron pipes and fittings for water application to the conform latest version of BS to the latest version of BS EN 545 and for sewer applications they conform version to the of latest BS EN 598. Dev All Saint-Gobain PAM UK s ductile iron pipes and fittings for water application version of BS EN 598. Development of pipes and fittings can take place across Saint-Gobain conform the PAM UK Pip to the latest version of BS EN 545 and for sewer applications they conform Saint-Gobain PAM UK Pipe Division. As such, third party accreditation is always achieved to the latest with the relevan version of BS EN 598. Development of pipes and fittings can take place across achieved with the relevant auditing body e.g. BSI in the UK, Bureau Veritas France the (BV) in and MPA-NRW in G Saint-Gobain PAM UK Pipe Division. As such, third party accreditation is always France and MPA-NRW in Germany. All of these certification bodies are also independently accredited achieved with the relevant auditing body e.g. BSI in the UK, Bureau Veritas (BV) in independently accredited, for example BSI is accredited by UKAS. France and MPA-NRW in Germany. All of these certification bodies are also In addition, all materials i independently accredited, for example BSI is accredited by UKAS. In addition, all materials in contact with potable water used by Saint-Gobain have PAM been UKapproved by th have been approved by the Secretary of State for the Environment, Food and Affairs Rural in accordance with In addition, all materials in contact with potable water used by Saint-Gobain Affairs in accordance with Regulation 31 of the Water Supply (Water Quality) Regulations PAM UK 2000 (Englan have been approved by the Secretary of State for the Environment, Food and Regulations 2000 (England) (2001 in Wales), and by the Scottish Ministers accordance Rural in with Regulati Affairs in accordance with Regulation 31.4.a of the of the Water Water Supply Supply (Water (Water Quality) accordance with Regulation 27 of the Water Supply (Water Quality) (Scotland) Regulations. Regulations 2000 (England) (2001 in Wales), and by the Scottish Ministers in Regulations. accordance with Regulation 27 of the Water Supply (Water Quality) (Scotland) Regulations.

Section 2 Product Range Product Range 11 11

Section 2: Product Range Key Dimensions - Push-fit Pipe De L Bend Bend Duckfoot Bend Duckfoot Bend L L L L H All Sochet Tee Flange on Double Socket Tee All Socket Tee Flange on Double Socket Tee H H Concentric Taper L Flanged & Socket L Concentric Taper Flanged & Socket L Flanged Spigot 45º Angle Branch L L Flanged Spigot Kameleo Collar L 12

H H H Key Dimensions - Flanged Pipe/Riser Piece Bend Duckfoot Bend L L L L L H 45 Angle Branch DN80-300 45 Angle Branch DN350-1200 Radial Tee H H 45 45 H H L H L L H All Flanged Level Invert Tee All Flanged Tee Concentric Taper L H L L Flat Taper Y Pipe Bellmouth H L L L L Loose Puddle Flange Blank Flange Cross L H DN80-300 DN350-2000 L 90 Long Radius Bend Hatchbox Reducing flange L L 13

Section 2: Product Range 14 PIPES Product Range (Pipe) The small diameter pipe without compromise Blutop Pipe: is an innovative ductile iron pipe system dedicated to small diameter potable water distribution which combines the strength of ductile iron with the lightness of plastic. It is Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in available in DN/OD 75, 90, 110, 1 and 0. Blutop is approved for potable water under regulation diameter range 31.4.a. DN60-2000. It is also WRc approved All Saint-Gobain and conforms PAM UK with pipes functional are manufactured performance inaspects of EN545. accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for sewerage. Benefits Lighter pipe system as there is no cement mortar lining, which facilitates manual handling Table Compatible 1: Standard with offer, plastic water pipes*, DN/OD dimensions Easy to assemble, new push fit joint with low insertion force Better hydraulic DN capacity than Pipe plastics Class thanks Pipe to an Length increased (mm) internal diameter Weight (kg) allowing: - Downsizing of pipe 80 Class - Lower carbon emissions 5500 85 - Reduced 100 pumping requirements Class 5500 102 Lower requirement for imported/exported bedding materials, thanks to the use of excavated 150 material as backfill Class 5500 153 Optimum 200water quality thanks Class to the innovative Ductan 5500 lining 204 Self-anchoring gasket available for restrained pipes application, eliminating the need for concrete 0thrust blocks Class 5500 262 Eco friendly 300 product designed Class to be environmentally 5500 sustainable: - Recycled and infinitely recyclable 331 - Reduction 350 in energy consumption Class linked to transport 5500 441 - Reduction in energy consumption for pumping 0 Class 5500 524 Technical 450 Details K9 5500 6 Diameter 500 Range DN/OD K975, 90, 110, 1 and 5500 0. 713 Joint 600 Manual K9push-fit 5500 930 Gasket 700 Blutop K9 non-restrained, PFA = 5500 bar Blutop restrained Vi (self-anchored), PFA = bar 1185 800 K9 5500 1444 Coating: (Zinalium Zn/Al 85/15 0g/m 2 plus 100 μm epoxy)** Pipes - Coating 900 & Lining Lining: K9 Ultramarine blue DUCTAN 6950 thermoplastic 300 2235 μm, nominal 1000 adhesion K9 8MPa 6950 2641 Fittings - Coating & 1100 Lining Epoxy K9 powder (EN14901 compliant) 8190 3605 Angular 1200 deflection 6 degrees K9 8190 4269 10 K9 8170 5647 1500 K9 80 6327 For further information on how to joint a Blutop pipe, please refer to Section 3: Joints of this brochure 00 (page 67) K9 80 7053 * Blutop socket compatible with PVC & HPPE spigot but PVC or HPPE socket not compatible with Blutop spigot 1800 K9 81 8587 ** For information on special coatings for Blutop please refer to Section 5: Pipe Coatings on page 94 2000 K9 8130 10190 PIPE - 6M LONG DOUBLE SPIGOT PIPE 1.M LONG Weight Product Weight Product DN/OD (Kg/m) Code (Kg) Code Note: Length and weight may vary from the detail provided in these tables. DN60 and 75 5.10 KXL75H60 5.90 229336 DN1 are available on request. BS EN 545 is currently being revised to include C30 pipe 90 6.20 KXL90H60 7.10 2410 in the diameter range DN350-600. This will be published in 2010. C30 pipes will be 110 7.60 KXM11H60 8.70 2412 supplied from Saint-Gobain PAM UK in 2010. 1 8.60 KXM12H60 10.00 227062 0 12.50 KXMH60 14.50 229337 DN/OD Weight (Kg) GASKET Product Code ANCHOR GASKET Weight (Kg) Product Code 75 0.058 JXL75BA 0.066 JXL75CA 90 0.060 JXL90BA 0.095 JXL90CA 110 0.075 JXM11BA 0.115 JXM11CA 1 0.090 JXM12BA 0.130 JXM12CA 0 0.171 JXMBA 0.220 JXMCA Note.- - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables

Section 2: Product Range Product Pipe Range Pipe: Saint-Gobain PAM UK supplies pipes for potable water (Natural and Classic) and sewerage applications (Integral Plus and Integral) in diameter range DN80-2000. All Saint-Gobain PAM UK pipes Saint-Gobain are manufactured PAM UK supply in accordance pipes for with potable the latest water version and sewerage of BS EN 545 applications for potable inwater and diameter BS EN 598 range for DN60-2000. sewerage. All Saint-Gobain PAM UK pipes are manufactured in accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for Table 1: Standard offer, water - System CL sewerage. DN Natural Prod Code Classic Table 1: Standard Pipe offer, water Length Prod Code Class (mm) Spigot OD mm (ØDE) Socket OD mm (ØB) 80 NSA80Q60 DN C Pipe 6000 Class Pipe 98Length (mm) 7.0 Weight (kg) 12.0 100 NSB10Q60 80 C Class 6000 118 5500 188.0 85 15.0 150 NSB15Q60 C 6000 170 242.0 22.0 100 Class 5500 102 200 NSB20Q60 C 6000 222 295.0 30.0 0 NSBQ60 150 C Class 6000 274 5500 352.0 153 42.0 300 NSB30F60 200 C Class 6000 326 5500 9.2 204 55.5 350 NSB35G60 0 C30 Class 6000 378 5500 464.2 262 69.0 0 NSBG60 C30 6000 429 5.2 79.5 300 Class 5500 331 450 NSB45G60 C30 6000 480 574.2 94.0 500 NSB50G60 350 C30 Class 6000 532 5500 629.2 441 111.0 600 NSB60G60 0 C30 Class 6000 635 5500 738.5 524 150.5 700 NSB70H60* SSB70G70 C/C30 450 6000/6960 K9 738 5500 863.0 188.0/217.9 6 800 NSB80H70* SSB80G70 C/C30 6950 842 974.0 213.0/267.0 500 K9 5500 713 900 NSB90H70 SSB90G70* C/C30 6950 945 1082.0 260.0/279.0 1000 NSC10H70 SSC10G70* 600 C/C30 6960 K9 10485500 1191.0 930311.5/334.0 1200 SSC12H80 700 C 8190 K9 155500 1412.5 1185 461.5 10 SSC14H80 800 C 8170 K9 1462 5500 1592.1 1444 634.5 00 SSCH80 C 80 68 1815.9 807.5 900 K9 6950 2235 1800 SSC18H80 C 8150 1875 2032.2 995.0 2000 SSC20H80 1000 C 8130 K9 20826950 29.0 2641 1210.0 1100 K9 8190 3605 * Preferred option - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - DN1100 and DN1500 pipes available on request (limited range of fittings) - For further information on the Rapid joint, please refer to Section 3: Joints of this brochure, page 67 Table 2: Standard offer, water - System XL DN Natural Prod Code Pipe Class 1200 K9 8190 4269 10 K9 8170 5647 1500 K9 80 6327 Weight (Kg/m) 00 Length K9 Spigot OD 80 Socket OD 7053 Weight 1800 (mm) K9 mm (øde) 81mm (øde) 8587(Kg/m) 80 189486 C 2000 5500 K9 98 8130 7.0 1019015.0 100 189509 C 5500 118 188.0 17.5 150 189515 C 5500 170 242.0 26.0 200 197942 C 5500 222 295.0 35.0 0 189518 Note: C Length and weight 5500 may vary from the 274 detail provided 352.0 in these tables. DN60 45.5 and 300 189519 DN1 C are available 5500 on request. BS EN 545 326 is currently being 9.2 revised to include C30 57.0pipe 350 NSB35G55EC in C30 the diameter range 5500 DN350-600. This will 378be published in 2010. 464.2 C30 pipes will be 69.0 0 NSBG55EC supplied C30 from Saint-Gobain 5500 PAM UK in 2010. 429 5.2 79.5 450 NSB45G55EC C30 5500 480 574.2 94.0 500 NSB50G55EC C30 5500 532 629.2 111.0 600 NSB60G55EC C30 5500 635 738.5 150.5 700 SSB70N55EC C30 5500 738 863.0 188.0 - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Saint-Gobain is expecting to manufacture 6m long pipes in the 2nd half of 2012. The above table will be updated accordingly in due course 14 15

Table 3: 2: Standard offer, sewer DN Integral DN Plus Integral Pipe Length Length (mm) Spigot OD Socket Weight OD (kg) Weight Prod code Prod code (mm) mm (øde mm (øde) (Kg/m) 80 205667 80 TSA80S60 5500 6000 98 7.0 85 13.0 100 205669 100 TSB10S60 5500 6000 118 188.0 102.0 150 205670 150 TSB15S60 5500 6000 170 242.0 153 23.5 200 205711 TSB20S60 6000 222 295.0 31.0 200 5500 204 0 205718 TSBS60 6000 274 352.0.5 300 205712 0 TSB30S60 5500 6000 326 9.2 262 51.0 350 205719 300 TSB35S60 5500 6000 378 464.2 331 66.5 0 205720 350 TSBS60 5500 6000 429 5.2 4 78.0 450 205731 TSB45S60 6000 480 574.2 92.5 0 5500 482 500 205732 TSB50S60 6000 532 629.2 106.5 600 205733 450 TSB60S60 5500 6000 635 738.5 565 138.0 700 205735 500 TSB70E69 6000/6950 5500 738 863.0 656 201.0 800 206666 600 TSB80E69 5500 6950 842 974.0 855 243.5 900 TSB90E69 6950 945 1082.0 291.5 700 5500 1104 1000 TSC10E69 6960 1048 1191.0 343.0 1200 800 TSC12N79 5500 8190 15 1412.5 1353 507.5 10 900 TSC14N80 6950 8170 1462 1592.1 2032 679.0 00 1000 TSCN80 6950 80 68 1815.9 2399 851.5 1800 TSC18N80 8150 1875 2032.2 1036.5 1100 8190 3579 2000 TSC20N80 8130 2082 29.0 1242.0 1200 8180 4115 - Lengths and weights 10 are provided for estimation purposes only 8170 and actual values may vary from those 5546 provided in these tables - DN1100 and DN1500 pipes available on request (limited range of fittings) - The differentiation 1500 between Integral Plus and Integral relates 80 to the coating of the pipe. For further information, 62 please refer to Section 5: Pipe Coating of this brochure, page 93 00 80 6946 1800 81 8435 For information on the different types of linings and coatings (including TT) that Saint- Gobain PAM UK 2000 has available please refer to: 8130 10099 - Section 4, Pipe Lining, page 85 - Section 5, Pipe Coating, page 93 Note: Length and weight may vary from the detail provided in these tables. Also, DN1 for are further available information upon request. on the different types of joints available from Saint-Gobain PAM UK please refer to Section 3: Joints of this brochure, page 67 15

Section 2: Product Range Fabricated Pipe Saint-Gobain PAM UK UK offers a range a range of fabricated of pipe pipe tailored tailored to customer customer requirements: flange requirements. spigot, flange Flange socket, spigot, double flange flanged, socketdouble and double spigot flanged and short pipes length are available socket spigot in a pipe variety in diameters of lengths DN80 in diameter to DN2000 range for both DN80-00 water and for sewer both water applications. and sewer Fabricated application. pipes are manufactured in accordance with BS EN 545 for potable water and BS EN 598 for sewerage. Fabricated pipes are manufactured in accordance with BS EN 545 for potable water The and Standard BS EN 598 flange for sewerage. rating is PN, but PN10, PN and PN are also available on request. Please contact the Technical Sales Department for further information, Tel: 0115 930 0700 The standard flange rating is PN. PN10, PN and PN are also available, contact Technical Sales Department, Tel: 0115 930 0650/0700. Puddle Flanges Puddle Flanges Fabricated pipes can be supplied with puddle flanges where required. Note.- Where multiple puddle flanges are required it is recommended that a drawing is sent Flanged, double spigot and spigot socket pipes can be supplied with puddle flanges with the enquiry. where required. Table Note: 4: Where Standard multiple fabricated puddle pipe flanges offer are required it is recommended that a drawing is sent with the enquiry. DN Clean Water (EN545) Sewerage (EN 598) Table 3: Standard fabricated Lining pipe offer Coating Lining Coating DN80-800 DN900-DN2000 DN80-800 Zinalium (Zinc Clean Water (EN 545) Sewerage (EN 598) and aluminium High Lining System CL, Coating alloy) and blue Lining Coating Zinc and red alumina cement lined epoxy epoxy cement Zinc/Aluminium and System CL, High alumina Zinc and red and blue bitumen epoxy cement lined cement epoxy external external Table 5 - Fabricated pipe System minimum CL, and Zinc maximum and lengths High (mm) alumina Zinc and red DN900+ bitumen Double Flange cement Flange lined spigot cement epoxy external external Double spigot Socket spigot Flange socket Min Max Min Max Min Max Min Max Min Max DN Please refer length to PAMRF04 length datasheet length length for fabricated length pipe length minimum lengthlengths. length length 80 135 1 150 600 600 100 147 1 150 600 600 150 147 173 150 600 600 200 1 5500 186 5500 150 6000 600 600 5500 0 171 194 170 600 600 300 223 223 450 600 5500 600 350 300 300 630 750 750 0 300 300 630 750 750 450 300 300 630 750 750 5900 5900 5900 500 300 350 680 750 750 5900 600 500 350 680 750 750 700 550 500 680 750 750 6500 800 750 500 680 900 900 60 60 60 60 900 750 750 680 900 1000 1000 750 750 680 900 1000 1200 1000 1000 680 900 7500 1300 10 1000 70 1000 70 680 70 900 1500 70 00 1500 1500 680 1000 1700 Please contact our technical team: - For any requirements outside the above minimum and maximum dimensions - For information on DN1800 and DN2000 18 17

Table 2: Standard Double Flange offer, sewer Flange spigot Double spigot Socket spigot Flange socket c/w puddle c/w puddle c/w puddle c/w puddle c/w puddle DN flange flange Pipe Length (mm) flange flange Weight (kg) flange DN Min Max Min Max Min Max Min Max Min Max 80 5500 85 length length length length length length length length length length 80 300 100 170 5500 150 600 102 600 100 300 170 150 600 600 150 5500 153 150 300 173 150 600 600 200 300 200 5500 190 5500 5500 150 5500 600 5500 204 650 5500 0 300 0 194 5500 170 600 262 700 300 500 2 450 600 750 350 500 300 420 5500 630 750 331 900 0 500 350 430 5500 630 750 4 900 450 500 450 630 750 950 0 5900 5900 5500 5900 6000 482 500 550 500 680 750 950 5900 600 550 450 550 5500 680 750 565 950 700 700 600 680 750 1000 500 5500 7000 656 800 750 650 680 900 1050 60 60 60 60 900 1100 600 1000 5500 750 900 855 1150 1000 1100 700 1000 5500 750 900 1104 1150 1200 1500 1200 1000 1000 8190 1300 10 1700 800 70 00 70 5500 1000 70 1000 1353 1500 70 00 2000 900 1800 6950 1500 1500 2032 1700 Please contact our technical team: - For any requirements outside the above minimum and maximum dimensions - For information on DN1800 and DN2000 1000 6950 2399 1100 8190 3579 1200 8180 4115 10 8170 5546 1500 80 62 00 80 6946 1800 81 8435 2000 8130 10099 Note: Length and weight may vary from the detail provided in these tables. DN1 are available upon request. 18 15

Section 2: Product Range Product PAM Range Direxional Pipe: A simple and effective ductile iron solution to situations where open cut trenches are not suitable or possible. Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in The diameter PAM Direxional range DN60-2000. range is Saint-Gobain All Saint-Gobain PAM UK s PAM Directional UK pipes drilling are manufactured pipe which can in be used for accordance both water with and the sewer latest applications. versions of BS EN 545 for potable water and BS EN 598 for Range sewerage. overview and technical details Table Diameter 1: Standard Rangeoffer, water DN100 to 700: ZMU coating DN800 to 1000: PUX based coating Self-anchored pushfit, Universal TIS-K (Tyton) or Universal Ve Joint DN Pipe Class Pipe Length (mm) Weight (kg) (Standard/Rapid) according to diameter 80 Class ZMU : 200mg Zinc 5500 plus 5mm cement Coating 85 PUX: thick sprayed polyurethane based coating 100 Class Water (EN545) - Blast 5500 furnace cement 102 Lining 150 Class Sewer (EN598) - Alumina 5500 cement 153 200 Class 5500 204 - Robustness of ZMU coating and PUX coating 0 Class 5500 262 ZM-U is a highly robust protective coating. In NO circumstances is further protection required. This coating 300 is suitable for drilling Class pipelines through rocky 5500 conditions without detrimental 331 effect on the performance of the coating or pipe. SGG have devised a shock test for this coating to prove its robustness. 350 Class 5500 441 0 Class 5500 524 PUX is a polyurethane coating intended for use with high aggressive soils. Each pipe is tested individually 450 after coating by a Holiday K9 detector test in order 5500 to check the protective 6 quality of the coating. 500 K9 5500 713 - Joint 600 K9 5500 930 PAM Direxional is assembled using a simple anchored push fit jointing system. The double chambered 700 socket allows for the use K9 of a locking ring which 5500 acts as both a restraint 1185 to enable the pipe to 800 be pulled through the K9 required drilling channel 5500and a thrust restraint 1444 for the pipeline. This joint is protected from abrasive conditions with the use of a rubber protective collar and 900 a metal sheet cone. K9 6950 2235 1000 K9 6950 2641 For further information on how to joint a PAM Direxional pipe, please refer to Section 3: Joints of this 1100 brochure (page 67). K9 8190 3605 1200 K9 Installation calculations and technical support 8190 4269 Saint-Gobain 10has developed a tool K9that will calculate the 8170 pulling forces required 5647 and will also make weight and lift calculations to ensure that the pipe is correctly balanced in the drilling channel. For 1500 further information on K9 this tool please contact 80 the technical department, 6327 Tel: 0115 930 000700 K9 80 7053 Benefits of 1800 Ductile Iron vs. Plastics K9 81 8587 2000 Ductile Iron Plastics K9 Comments 8130 10190 SAFETY FACTORS HIGH (2.5) LOW (1.2) LOW SAFETY FACTORS IN PLASTICS MEAN FAILURES ARE A VERY REAL RISK TESTING EASY HARD Note: JOINTS Length and ANCHORED weight may COIL FOR vary SMALL from DUCTILE the IRON detail CAN BE provided JOINTED DURING in these THE tables. DN60 and PUSH FIT DN & WELDED PULLING OF THE PIPE REDUCING STOP/START DN1 are available on request. FOR LARGER BS DNEN STRAINS 545 is ON currently PIPE/MACHINERY being revised to include C30 pipe in FLOATATION the diameter SMALL range DN350-600. SIGNIFICANT?? This SIMPLE will CALCULATION be published TOOL in AVAILABLE 2010. FOR C30 SGP pipes will be CONDSIDERATION DUCTILE IRON supplied from Saint-Gobain PAM UK in 2010. PLANNING COMPLEXITY 1 PROCESS 1 PRODUCT 1 PROCESS MANY PRODUCT DUCTILE IRON ALLOWS A CONTRACTOR TO INSTALL TEST AND FORGET HIGH VARIETY OF PRODUCTS AVAILBLE WITH VARYING QUALITY ADDS COMPLEXITY TO DESIGN UNPREDICTABLE GROUND CONDITIONS NO/LITTLE PROBLEM WILL CAUSE PROBLEMS WITH PERFORMANCE OF PIPE DUCTILE IRON OFFERS ONE SOLUTION TO COVER A WIDE VARIETY OF CONDTIONS EASY TO SPECIFY, HARD TO GET WRONG PULLING FORCES CAN WITHSTAND HIGH FORCES VARIABLE ACROSS DIFFERENT PRODUCTS MANY NEW MACHINES IN MARKET HAVE ABILITY TO PULL AT WITH VERY HIGH FORCES, IN CERTAIN CASES THIS COULD BE MORE THAN MATERIAL CAN TAKE MACHINERY NO ADDITIONAL EQUIPMENT REQUIRED FOR PULLING DUCTILE IRON PIPES. 14 19

Section 2: Product Range Product PAM Range Direxional Pipe: Product Information Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in Water Pipes diameter range DN60-2000. All Saint-Gobain PAM UK pipes are manufactured in accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for sewerage. Allowable Product Allowable Length Operating Spigot O/D Socket* Weight Pipe DN Joint code Table deflection 1: Standard (mm) offer, water Pressure (mm) O/D (mm) (Kg/m) Class (PFA) 100 224302 UNV TIS-K 3º DN 5970 Pipe Class 64 Pipe Length (mm) 128 220 Weight (kg) 22.50 C100 80 Class 5500 85 150 224305 UNV TIS-K 3º 5970 60 180 260 32.50 C64 100 Class 5500 102 200 224307 UNV TIS-K 3º 150 5970 52 Class 232 320 5500 45.00 153 C64 0 224308 UNV TIS-K 3º 200 5970 Class 46 284 5500 380 59.00 204 C50 300 224309 UNV TIS-K 3º 0 5970 Class 41 336 5500 4 74.00 262 C50 350 224310 UNV STD Ve 3º 300 5970 Class 38 378 5500 495 92.50 331 C 0 224311 UNV STD Ve 3º 350 5970 Class 35 439 5500 5 108.00 441 C 450 On request UNV STD Ve 3º 0 5970 Class 32 490 5500 600 524 On request C 500 224312 UNV STD Ve 2º 450 5970 K9 30 542 5500 655 6 149.00 C 500 K9 5500 713 600 224313 UNV STD Ve 2º 5970 30 645 770 195.00 C For pipes with 600 a deflection of 3 the minimum K9 radius achievable will be 115m 5500 and for pipes with a deflection 930 of 2 the minimum 700 224314 UNV STD Ve radius achievable 2º will be 172m. 5970 700 27 K9 748 885 5500 246.00 1185 C30 Sewer Pipes 800 K9 5500 1444 900 K9 6950 2235 1000 K9 6950 2641 1100 K9 Allowable 8190 3605 Product Allowable 1200 Operating K9 Spigot O/D 8190 Socket* Weight 4269 DN Joint Length code deflection Pressure (mm) O/D (mm) (Kg/m) 10 K9 8170 5647 (PFA) 1500 K9 80 6327 100 226988 UNV STD Ve 3º 00 5970 64 K9 128 220 80 22.50 7053 150 227008 UNV STD Ve 3º 1800 5970 55 K9 180 81 260 32.50 8587 200 226990 UNV STD Ve 3º 2000 5970 44 K9 232 8130 320 45.00 10190 0 226992 UNV STD Ve 3º 5970 39 284 380 59.00 300 350 0 226993 226994 226995 UNV STD Ve UNV STD Ve UNV STD Ve 3º 5970 37 336 4 74.00 Note: Length and weight may vary from the detail provided in these tables. DN60 and DN1 3º are available 5970on request. 32 BS EN 545 is 388 currently being 495revised to include 92.50 C30 pipe in the diameter range DN350-600. This will be published in 2010. C30 pipes will be 3º 5970 30 439 5 108.00 supplied from Saint-Gobain PAM UK in 2010. 450 On request UNV STD Ve 3º 5970 30 490 600 On request 500 On request UNV STD Ve 2º 5970 30 542 655 149.00 600 226881 UNV STD Ve 2º 5970 27 645 770 195.00 700 226996 UNV STD Ve 2º 5970 748 885 246.00 For pipes with a deflection of 3º the minimum radius achievable will be 115m and for pipes with a deflection of 2º the minimum radius achievable will be 172m. - Lenghts and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on DN800-DN1000 range, please contact our Technical Department on 0115 930 0700 20 14

Section 2: Product Range Product PAM Range Direxional Pipe: Other Components Saint-Gobain PAM UK supply pipes for potable water and sewerage applications in diameter range DN60-2000. All Saint-Gobain PAM UK pipes are manufactured in DN Pulling Heads Product code Gaskets Locking ring Socket sleeve Metallic cone accordance with the latest versions of BS EN 545 for potable water and BS EN 598 for sewerage. WATER Product Code SEWER Product Code Product code Product code Product code Table 1: Standard offer, water 100 173371 JCB10BA JSB10BB 1109 110823 110326 150 177686 JCB15BA DN JSB15BB Pipe Class Pipe Length (mm) AKB15E 110821 Weight (kg) 1103 200 177685 JCB20BA 80 JSB20BB Class AKB20E 5500 110822 85 110324 100 Class 5500 102 0 177684 JCBBA JSBBB AKBE 110828 110323 150 Class 5500 153 300 177683 JCB30BA 200 JSB30BB Class AKB30E 5500 110834 204 110322 350 177689 185411 0 JSB35BB Class JKB35E 5500 158313 262 208176 0 215720 185412 300 JSBBB Class JKBE 5500 110750 331 110321 450 184694 185413 350 JSB45BB Class JKB45E 5500 110301 441 211369 500 215792 185414 0 JSB50BB Class JKB50E 5500 110773 524 110320 600 215897 185415 450 JSB60BB K9 JKB60E 5500 110776 6 110327 700 215988 JSB70BA 500 JSB70BB K9 110671 5500 110026 713 110328 600 K9 5500 930 For pipes with a deflection of 3 the minimum radius achievable will be 115m and for pipes with a deflection of 2 the minimum radius achievable will be 172m. Jointing 700 K9 5500 1185 800 K9 5500 1444 900 K9 6950 Products required 2235 for Products required to make a joint: dismantling a joint: DN 1000 K9 6950 2641 Product Product Product Description Qty 1100 Description K9 Qty code code 8190code Description 3605 Qty 100 110355 Lever Fork Tool 1 1200 K9 8190 Disassembling 4269 NOT REQD 3 110281 set 10 K9 8170 5647 1 150 110355 Lever Fork Tool 1 1500 NOT REQD K9 3 80 110282 Disassembling set6327 1 200 110355 Lever Fork Tool 1 00 K9 80 Disassembling 7053 NOT REQD 3 110283 set 1800 K9 81 8587 1 0 110279 Assembly Assembly Disassembling 1 Lever 20001112 K9 1 Wedges 8130 110284 set 10190 1 300 110279 350 110279 0 110279 450 110279 500 110279 Assembly Lever Assembly Lever Assembly Lever Assembly Lever Assembly Lever 1 1113 Assembly Wedges 1 110285 Disassembling set Note: Length and weight may Assembly vary from the detail provided in these Disassembling 1 1113 1 1113 tables. DN60 and 1 Wedges set DN1 are available on request. BS EN 545 is currently being revised to include C30 pipe in the diameter range DN350-600. Assembly This will be published in 2010. C30 Assembly 1 1114 1 1114 pipes will be 1 Wedges Wedges supplied from Saint-Gobain PAM UK in 2010. Assembly Assembly 1 1115 1 1115 1 Wedges Wedges 1 1115 600 1 1115 700 1 1116 Assembly Wedges Assembly Wedges Assembly Wedges 1 1115 1 1115 1 1116 Assembly Wedges Assembly Wedges Assembly Wedges 1 1 1 1 14 21

Fittings Range Fittings: Saint-Gobain PAM UK supplies a comprehensive range of ductile iron fittings in diameter range DN80-2000. Please note that a selection of flanged fittings are supplied with adjustable flanges. Saint-Gobain Further PAM information UK supplies on adjustable a comprehensive flanges is range available of ductile on page iron 83 fittings of this guide. in diameter range DN60-2000. The standard range is detailed in pages 18-57. Please note that a Flanged selection fittings of flanged are supplied fittings as are standard supplied with with PN adjustable flanges. flanges. For availability Further of information PN10, PN or on PN adjustable items flanges please contact is available the Technical on page Sales 74 89 of Department, this guide. Tel: 0115 930 0700 Saint-Gobain Flanged fittings PAM are UK supplied supplies as two standard ranges of with fittings: PN flanges. For availability of PN10, PN or PN - Blutop items fittings, please which contact are available the Technical on DN/OD Sales 75, Department, 90, 110, 1 and 0. Tel: 0115-930 Traditional 0650/0700. range of push-fit and flanged fittings, available on DN80-2000. Gasket Identification It is important that the appropriate gasket is used, EPDM for potable water application and Nitrile for sewerage applications. Rapid joint gaskets are easily identifiable being marked EPDM for use with potable water or marked NBR, indicating Nitrile, for sewer applications. In addition, to help with identification and eliminating potential confusion on site, Rapid joint gaskets are colour-coded. Nitrile gaskets for sewer applications can retain be identified the current by a double yellow ring throughout the size range DN80-2000. EPDM gaskets for water applications can be identified by a light blue double ring in the size range DN80-600. Note: Anchor gaskets do not have colour markings. - Anchor gaskets do not have colour markings - For further information on the rapid joint, please refer to Section 3: Joints of this brochure, page 67 Blutop Gasket The Blutop range of products utilizes a unique gasket available in non-anchored and anchored versions: Standard (non-anchored) Blutop gasket Anchored Blutop gasket 22 17

Range (Fittings) The Table small 2: Standard diameter offer, pipe without sewer compromise. Blutop is an innovative ductile iron pipe system dedicated to small diameter potable water distribution and is available in DN/OD 75, 90, 110, 1 and 0. DN Pipe Length (mm) Weight (kg) FITTINGS 80 5500 85 90 BEND 100 45 BEND 5500 22½ BEND 10211¼ BEND DN/OD Weight Product 150 Weight Product 5500 Weight Product Weight 153 Product (Kg) Code (Kg) Code (Kg) Code (Kg) Code 75 4. 200 KXL75CA 4.20 5500 KXL75CB 3. KXL75CD 204 3.50 KXL75CE 90 5.50 KXL90CA 0 5.10 KXL90CB 5500 4. KXL90CD 262 3.80 KXL90CE 110 7.10 KXM11CA 300 6.20 KXM11CB 5500 5.50 KXM11CD 331 5.80 KXM11CE 1 8.80 KXM12CA 7.00 KXM12CB 6.60 KXM12CD 6.70 KXM12CE 350 5500 4 0 12.30 KXMCA 10.30 KXMCB 9.20 KXMCD 9.10 KXMCE 0 5500 482 DN 80 FLANGED DUCKFOOT BEND 450 FLANGED SOCKET 5500 FLANGED 565 SPIGOT DN/OD Weight Product Weight Product Weight Product (Kg) Code 500 (Kg) Code 5500 (Kg) 656 Code 75 600 5.00 KXL75BE1C 5500 3.85855 KXL75BU1C 90 8.00 KXL90DF0E 700 5.50 KXL90BE1E 5500 4.70 1104 KXL90BU1E 110 11. KXM11DF0E 6.70 KXM11BE1F 6.00 KXM11BU1F 800 5500 1353 1 13.60 KXM12DF0E 8.20 KXM12BE1G 7.90 KXM12BU1G 0 900 11.00 KXMBE1J 6950 12.10 2032 KXMBU1J 1000 DOUBLE SOCKET TEE WITH FLG BRANCH 6950 2399 DN/OD Weight 1100 Product 8190 3579 (Kg) 1200 Code 8180 4115 75x 5.80 KXL75TD1A 10 8170 5546 75x60 7.80 KXL75TD1C 1500 80 ALL SOCKET TEE 62 90x 6.80 KXL90TD1A 90x60 8.60 KXL90TD1C 00 DN/OD80 Weight Product 6946 (Kg) Code 90x80 9. KXL90TD1E 1800 90x9081 6.808435KXL90TE0D 110x 7.60 KXM11TD1A 2000 110x908130 7.80 10099KXM11TE0D 110x60 9. KXM11TD1C 110x110 8.70 KXM11TE0E 110x80 11.00 KXM11TD1E 1x90 9.20 KXM12TE0D Note: Length and weight may vary from the detail provided in these tables. 110x100 12.20 KXM11TD1F 1x110 10.00 KXM12TE0E DN1 are available upon request. 1x 9.20 KXM12TD1A 1x1 11.00 KXM12TE0G 1x60 10.80 KXM12TD1C 0X100 13.00 KXMTE0E 1x80 11.50 KXM12TD1E 0X1 13.6 KXMTE0G 1x100 12.20 KXM12TD1F 1x1 15.00 KXM12TD1G 0X 11.30 KXMTD1A 0X60 12.90 KXMTD1C 0X80 14.30 KXMTD1E 0X100. KXMTD1F 0X1 18.00 KXMTD1G 0X150 20.30 KXMTD1J Note.- - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables 24 15 23

Section 2: Product Range Fabricated Pipe Saint-Gobain PAM UK offers a range of fabricated pipe tailored to customer FITTINGS requirements. Flange spigot, flange socket and double flanged pipes are available in a variety of lengths in diameter range DN80-00 for both water and sewer application. SEMI SLIDING COLLAR Fabricated pipes are manufactured collar in accordance with BS EN 545 for PLUG potable water WITH BOSS FOR DRILLING and BS EN 598 for sewerage. DN/OD Weight Product Weight Product Weight Product (Kg) Code (Kg) Code (Kg) Code The standard flange rating is PN. PN10, PN and PN are also available, contact 75 5.30 KXL75MM Technical Sales Department, Tel: 0115 930 0650/0700. 90 6.30 KXL90MM 4.00 KXL90MN 2.00 KXL90BH 110 7.30 KXM11MM Puddle Flanges 4.90 KXM11MN 2.20 KXM11BH 1 8.80 KXM12MM 5.50 KXM12MN 2.95 KXM12BH Flanged, double spigot and spigot socket pipes can be supplied with puddle flanges 0 10.70 KXMMM where required. TAPER QUICK FLANGE (ANCHORED) DN/OD Weight Note: Product Where multiple puddle flanges are required Weight it is recommended Product that a drawing is DN/OD (Kg) sentcode with the enquiry. (Kg) Code 110x90 5.00 KXM11VE0D 75x60/65 2. 226300 1x90 5.20 Table KXM12VE0D 3: Standard 90x80 fabricated pipe offer 2.80 2901 1x110 5.50 KXM12VE0E 0x75 6.50 KXMVE0C DN 0x90 7.00 KXMVE0D 0x110 7. KXMVE0E 0X1 7.80 KXMVE0G DN80-800 VALVES 110x100 3. 2902 Clean Water (EN 545) Sewerage (EN 598) 1x1 4.30 2906 Lining Coating Lining Coating 0x150 5.70 226301 System CL, cement lined Zinc/Aluminium and blue epoxy external High alumina cement Zinc and red epoxy external PUSH FIT VALVE FOR BLUTOP OR PLASTIC PIPES Zinc and System CL, High alumina Zinc and red Anticlockwise Close DN900+ Clockwise Close bitumen cement lined cement epoxy external with cap top no cap top external DN/OD Weight Product Weight Product (Kg) Please Coderefer to PAMRF04 (Kg) datasheet Code for fabricated pipe minimum lengths. 75 12.30 RDL75KDXH 12.10 RDL75KBXH 90 12.80 RDL90KDXH 12.60 RDL90KBXH 110.20 RDM11KDXH.00 RDM11KBXH 1 22.80 RDM12KDXH 22.60 RDM12KBXH 0 30.00 RDMKDXH 29.80 RDMKBXH ACCESSORIES Contents (Kg) LUBRICANT Product Code REPAIR COATING Weight (Kg) Product Code 0.85 158128 1 213686 DN/OD Weight (Kg) DRILLING & TAPPING SADDLE Product Code 75 Please enquire Please enquire 90 12.60 223387 110.00 223389 1 22.60 223390 0 Please enquire Please enquire Note.- - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables 24

Variable Angle BenD Table Kameleo 2: Standard is a variable offer, angle sewer fitting designed for use with water supply pipelines. It consists of a main component or body and a range of accessories (kits) that combine together to produce different types DNof joints: double socket, Pipe double Length flange, (mm) socket/flange, mechanical, Weight (kg) etc 80 5500 85 It has a continuous variable angle from 0 to 45 which allows to make any connection with a single bend, 100 without the need of using several 5500bends. 102 150 5500 153 It has an allowable operating pressure (PFA) of bar, a 0 μm epoxy coating and hot dipped galvanised steel 200nuts and bolts. 5500 204 Compliance 0 with standards and regulations: 5500 262 Type tests 300 carried out on Kameleo comply 5500 with EN 545 331 The epoxy coating complies with EN 14901 The components 350 in contact with drinking 5500 water are in accordance with 4 European regulations on potable 0 water 5500 482 For maintenance 450 and repairs 5500 565 In its flanged socket and collar versions, Kameleo slides along the pipe completely (at 0 ) and 500 5500 656 can be used in insertion. Its variable 600 angle allows Kameleo to slip 5500 into small gaps, between two pipe 855 spigots, for easy maintenance and durable repairs to small damaged pipe sections. The different 700 versions of Kameleo can be 5500 easily pre-assembled outside 1104 the trench for ease of installation. 800 5500 1353 900 6950 2032 1000 6950 2399 1100 8190 3579 DN/OD Product Code 1200 8180 Product Code Push-Fit Gasket 4115 10 Rapid 8170 Rapid 5546 anchored 80 SZA80CV00TT 1500 1855 80 JSA80CA 62 100 SZB10CV00TT 00 1856 80 JSB10CA 6946 150 SZB15CV00TT 1800 1857 81 JSB15DA 8435 Flanged Joint (Flange, gasket, bolts, nuts and washers) DN/OD Product Code 80 JZA80KB 100 JZB10KB 150 JZB15KB 2000 8130 10099 Mechanical Joint (Flange, gland, rapid gasket, bolts, nuts & washers) Note: Length and weight may vary from the detail provided in these tables. DN1 are available upon request. Product DN/OD Code 80 JZA80KE 100 JZB10KE 150 JZB15KE Mechanical Anchored Joint (Flange, gland, rapid anchored gasket, bolts, nuts and washers) DN/OD Product Code 80 JZA80KL 100 JZB10KL 150 JZB15KL Mechanical Anchored Joint (Special insertion) (Flange, 2 x glands, rapid gasket, rapid anchored gasket, rods, nuts and washers) DN/OD Product Code 80 JZA80KM 100 JZB10KM 150 JZB15KM 15

Section 2: Product Range DN80 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 65 (PFA) 92 bar 7.0 RAPID 45-65 57 6.5 Kameleo Variable Angle Bend 22.5 SZA80CV00TT - 65 32 0 6.0 11.0 Bend 90 SSA80CA00TT TSA80CA 64 92 8.0 11. 65 5.5 45 SSA80CB00TT TSA80CB 64 57 7.5 Duckfoot 22.5 SSA80CD00TT 65 TSA80CD 100 64 110 32 11.5 6.5 Hydrant Duckfoot 11. SSA80CE00TT TSA80CE 110 64 92 12.5 7.0 Duckfoot All Socket Tee DN80 SSA80CF00TT SSA80CF00FF 65 64 183 95 92 110 11.0 12.0 Hydrant Flange Duckfoot on Double Socket Tee All socket tee DN80 DN80 SSA80CG1ETT SSA80TE0ETT - TSA80TE0E 183 64 150 5 183 95 92 12.5 12.5 11.5 Flange 45 on Angle Double Branch Socket Tee* DN80 SSA80UD1ETT TSA80UD1E 65 300 1830 5 Please enquire13.0 45 Angle Flange Branch & Socket Piece** SSA80TU0ETT SSA80TU0EFF 64 110 300 0 7.5 15.0 Flange Flange & Socket & Piece* Spigot Piece SSA80BE10TT TSA80BE1 350 110 8.0 7.5 Flange & spigot Piece Cap BBA80BU10TT BBA80BU10FF 65 82 350 8.0 Please enquire UNIVERSAL Flange joint sets are available to order, please contact your customer service representative. Bend* Weights are to be used as a guide. 90 SFA80CA00TT - 64 102 11.5 45 SFA80CB00TT - 64 56 10.5 22.5 SFA80CD00TT - 64 38 10.0 11. SFA80CE00TT - 64 30 10.0 Flange & Socket Piece* SFA80BE10TT - 130 9.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 Kameleo length at 0 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 26 18 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN80 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Riser Pieces 100mm long (PFA) bar 7.0 Riser piece 150mm 100mm long long BBA80MT1UTT BBA80MT1UFF 7.8 7.0 150mm long 200mm long BBA80MT1ZTT BBA80MT1ZFF 8.5 8.0 200mm long 0mm long BBA80MT1VTT BBA80MT1VFF 9.1 9.0 0mm long BBA80MT1ATT BBA80MT1AFF 9.5 300mm long 9.7 300mm long BBA80MT1WTT BBA80MT1WFF 10.5 350mm long 10.4 350mm long 186712-10.5 0mm long 0mm long BBA80MT1XTT BBA80MT1XFF 9.0 12.0 Bends Bend 90 90 BBA80CA10TT BBA80CA10FF 5 5 9.5 10.0 45 45 BBA80CB10TT BBA80CB10FF 130 130 11.0 10.5 22.5 22.5 BBA80CD10TT BBA80CD10FF 100 100 11.0 11.0 11. 11. BBA80CE10TT BBA80CE10FF 110 113 8.5 9.0 90 Long Duckfoot radius bend BBA80CH10TT BBA80CH10FF 5 110 380 14.0 14.0 Duckfoot All Flange Tee DN80 BBA80CF10TT BBA80CF10FF 330 5 11015.6 14.0 All Flange Tee All Flange Radial DN80 BBA80TE1ETT BBA80TE1EFF 545 330 380 5 23.0 15.5 All Flange Radial Cross BBA80TW1ETT BBA80TW1EFF 330 545 5 380 20.5 23.0 Cross 45 Angle Branch BBA80XN1ETT BBA80XN1EFF 411 330 315 5 21.0 22.0 45 Angle Branch BBA80TU1ETT BBA80TU1EFF 0 309 21.0 Tapers Concentric DN50 200 9.5 Concentric Taper DN50 BBA80VE1BTT BBA80VE1BFF 200 8.5 Flat DN50 200 Please enquire Flat Taper DN50 BBA80VT1BTT BBA80VT1BFF 200 7.5 Y Pipe Y Pipe BBA80YN10TT BBA80YN10FF 5 5 Please enquire.0 Bellmouth Bellmouth BBA80BP10TT BBA80BP10FF 135 0 135 Please enquire 0 5.0 Hatchbox Loose Puddle Flange - 193377 110 260 11.5 65.0 Loose Blank Puddle Flange Standard BBA80PF00TT BBA80PF00FF 110 2603.5 11.5 Blank Flange D/T Standard 1" 186646 BBA80QN10FF 3.5 3.5 D/T 2" D/T 1" 186649 186652 3.5 4.0 Flange joint sets are available D/T to 1.5" order, please contact 186650 your customer 186654 service representative. 4.0 * Weights are to be used as a D/T guide. 2" 186651 186653 4.0 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 19 27

Section 2: Product Range DN100 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 65 (PFA) 105 bar 9.2 RAPID 45-65 65 7.9 Kameleo Variable Angle Bend 22.5 SZB10CV00TT - 65 35 180 7.3 14.0 Bend 90 SSB10CA00TT TSB10CA 64 105 10.5 11. 65 6.9 45 SSB10CB00TT TSB10CB 64 65 9.0 Duckfoot 22.5 SSB10CD00TT 65 TSB10CD 120 64 1 35 14.8 8.0 Hydrant Duckfoot 11. SSB10CE00TT TSB10CE 1 64 105 15.9 8.5 Duckfoot All Socket Tee DN80 SSB10CF00TT SSB10CF00FF 65 64 185 110104 1 12.6 15.5 Hydrant Duckfoot DN100 SSB10CG1ETT 65-210 105 105 1 13.7.5 All socket Flange tee on Double DN80** DN80 SSB10TE0ETT TSB10TE0E 64 185 185177 104 14.2 14.0 Socket Tee DN100 DN100** SSB10TE0FTT TSB10TE0F 64 210 210 180 105 15.9 15.5 Flange on Double Socket Tee* DN80 SSB10UD1ETT TSB10UD1E 185 177 15.0 45 Angle Branch 65 300 0 Please enquire DN100 SSB10UD1FTT TSB10UD1F 210 180 17.0 Tapers Concentric 45 Angle Branch DN80 SSB10TU0FTT 65 SSB10TU0FFF 105 64 300 0 6.6 18.0 Flange & Socket Piece** Concentric Taper DN80 SSB10VE0ETT TSB10VE0E 110* 64 105 8.7 7.5 Double Flange Socket & Collar Spigot Piece SSB10MM00TT SSB10MM00FF 64 360 0 10.0 12.0 Flange Cap & Socket Piece* SSB10BE10TT TSB10BE1 65 82 110 Please enquire 9.0 Flange Flange & spigot joint Piece sets are available to order, please BBB10BU10TT contact your customer BBB10BU10FF service representative. 360 10.0 UNIVERSAL * Weights are to be used as a guide. Bend 90 SFB10CA00TT - 64 123 17.0 45 SFB10CB00TT - 64 64.0 22.5 SFB10CD00TT - 64 49 15.0 11. SFB10CE00TT - 64 33 14.5 All socket tee DN80 SFB10TE0ETT - 64 170 95 21.5 DN100 SFB10TE0FTT - 64 190 95 26.5 Flange on Double Socket Tee* DN80 SFB10UD1ETT - 170 175 21.0 DN100 SFB10UD1FTT - 190 180 22.5 Concentric Taper DN80 SFB10VE0ETT - 64 90 12.5 Flange & Socket Piece* SFB10BE10TT - 130 12.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 Kameleo length at 0 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 28 20 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN100 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Riser Pieces 150mm long (PFA) bar 9.2 Riser piece 200mm 100mm long long BBB10MT1UTT BBB10MT1UFF 10.1 8.5 150mm long 0mm long BBB10MT1ZTT BBB10MT1ZFF 10.9 9.0 200mm long 300mm long BBB10MT1VTT BBB10MT1VFF 11.8 10.0 0mm long BBB10MT1ATT BBB10MT1AFF 11.0 350mm long 12.7 300mm long BBB10MT1WTT BBB10MT1WFF 12.5 0mm long 13.6 350mm long 186728-12.5 Bends 90 0mm long BBB10MT1XTT BBB10MT1XFF 180 12.0 15.0 Bend 45 90 BBB10CA10TT BBB10CA10FF 1 180 11.5 12.0 22.5 45 BBB10CB10TT BBB10CB10FF 110 1 11.5 11.5 11. 22.5 BBB10CD10TT BBB10CD10FF 115 110 10.0 11.5 Duckfoot DN80 11. BBB10CE10TT BBB10CE10FF 180 115 1.0.0 90 Long radius bend DN100 BBB10CH10TT BBB10CH10FF 180 0 1 17.0 18.0 Duckfoot All Flange Tee DN80 DN80 BBB10CF1ETT BBB10CF1EFF 360 180 175 1 18.5 20.0 DN100 DN100 BBB10CF10TT BBB10CF10FF 360 180 180 1 19.0 17.5 All Flange Tee All Flange Radial DN80 BBB10TE1ETT BBB10TE1EFF 580 360 0 175 29.6 18.5 Cross DN100 BBB10TE1FTT BBB10TE1FFF 360 180 19.5 360 180 Please enquire All Flange Radial BBB10TW1FTT BBB10TW1FFF 580 0 29.5 45 Angle Branch 431 296 27.0 Level invert tee DN80 BBB10TT1ETT BBB10TT1EFF 360 195 19.5 Tapers Concentric DN50 200 8.5 Cross BBB10XN1FTT BBB10XN1FFF 360 180 26.5 45 Angle Branch DN80 BBB10TU1FTT BBB10TU1FFF 200 430 328 9.0 27.0 Flat Concentric Taper DN50 DN50 BBB10VE1BTT BBB10VE1BFF 300 200 Please enquire 8.5 DN80 DN80 BBB10VE1ETT BBB10VE1EFF 200 200 9.3 9.5 Flat Taper Y Pipe DN50 BBB10VT1BTT BBB10VT1BFF 180 300 Please enquire 9.5 Bellmouth DN80 BBB10VT1ETT BBB10VT1EFF 1 200 185 Please enquire 9.5 Y PipeLoose Puddle Flange BBB10YN10TT BBB10YN10FF 110 180 305 14.5 19.5 Bellmouth Blank Flange Standard BBB10BP10TT BBB10BP10FF 1 185 4.8 6.5 Hatchbox D/T 1" - 193369 4.8 70.0 Loose Puddle Flange D/T 2" BBB10PF00TT BBB10PF00FF 110 305 4.8 14.5 Blank Flange Standard 186661 TBB10QN10FF Flange joint sets are available to order, please contact your customer service representative. 5.0 * Weights are to be used as a D/T guide. 1" 186663 186666 5.0 D/T 1.5" 186664-5.0 D/T 2" 186665 186667 5.0 Reducing flange** DN80 BBB10RM1ETT - 7.0 **Delivered with studs, washers and nuts - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 21 29

Section 2: Product Range DN150 Push-fit (Rapid) Allowable Product Allowable code Key Allowable Dimensions Key dimensions Weight Description Operating Pressure Test Pressure Operating Description Per (PFA) bar Water (PEA) bar Sewer Pressure L mm H mm L mm Unit H mm (kg)* (PFA) bar RAPIDBends 90 65-153.8 Weight Per Unit (Kg) Kameleo Variable Angle Bend 45 SZB15CV00TT 65-93 200 13.5 24.0 Bend 22.5 90 SSB15CA00TT 65TSB15CA 42 64 153 12.0 18.5 45 SSB15CB00TT TSB15CB 64 93.0 11. 65 46 11.2 22.5 SSB15CD00TT TSB15CD 64 42 13.0 Duckfoot 65 0 153 Please enquire 11. SSB15CE00TT TSB15CE 64 46 13.0 Hydrant Duckfoot 0 153 21.5 Duckfoot SSB15CF00TT SSB15CF00FF 64 155 0 27.0 All Socket Tee DN80 65 5 137 18.1 Hydrant Duckfoot SSB15CG1ETT - 1 135 29.0 All socket tee DN100 DN80 SSB15TE0ETT 65 SSB15TE0EFF 190 64 15 137 19.5 18.0 DN150 DN100 SSB15TE0FTT 65 SSB15TE0FFF 305 64 153190 1 23.0 20.0 Flange on Double DN80** DN150 SSB15TE0JTT TSB15TE0J 5 64 210305 153 19.6 28.0 Flange Socket on Double Tee Socket Tee* DN100** DN80 SSB15UD1ETT TSB15UD1E 190 5 215 210 21.5 20.0 DN150** DN100 SSB15UD1FTT TSB15UD1F 305 190 220 215 26.5 22.0 DN150 SSB15UD1JTT TSB15UD1J 305 220 30.0 Flange on Socket Flange on Socket Level invert tee* Level Invert DN80 DN80 SSB15UT1ETT SSB15UT1EFF 188 188 220 220 Please enquire 19.0 45 Angle Branch 45 Angle Branch SSB15TU0JTT SSB15TU0JFF 65 64 0 0 350 350 34.0 34.0 Concentric Taper DN80 SSB15VE0ETT TSB15VE0E 64 170 11.0 Tapers Concentric DN80 65 170 10.9 DN100 SSB15VE0FTT TSB15VE0F 64 130 11.0 Double Socket Collar DN100 SSB15MM00TT 65 SSB15MM00FF 130 64 5 10.8 17.0 Flange Flange & Socket & Piece* Socket Piece** SSB15BE10TT TSB15BE1 118* 115 13.6 14.0 Flange Flange & Spigot & Piece Spigot Piece BBB15BU10TT BBB15BU10FF 380 380 15.6 15.5 UNIVERSAL Cap 65 82 Please enquire BendFlange joint sets are available to order, 90 please contact SFB15CA00TT your customer service - representative. 64 172 27.5 * Weights are to be used as a guide. 45 SFB15CB00TT - 64 87 24.5 22.5 SFB15CD00TT - 64 54 23.0 11. SFB15CE00TT - 64 39 22.0 All socket tee DN80 SFB15TE0ETT - 64 170 120 30.0 DN100 SFB15TE0FTT - 64 195 120 33.0 DN150 SFB15TE0JTT - 64 5 1 38.0 Flange on Double Socket Tee* DN80 SFB15UD1ETT - 170 205 30.0 DN100 SFB15UD1FTT - 195 210 31.5 DN150 SFB15UD1JTT - 5 220 36.5 Concentric Taper DN80 SFB15VE0ETT - 64 190 18.5 DN100 SFB15VE0FTT - 64 150 20.0 Flange & Socket Piece* SFB15BE10TT - 135 14.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 Kameleo length at 0 30 22 - For information ** Adjustable on gaskets flanges, and joint sets for (Rapid, bolt Universal lengths and refer flange) to please adjustable refer to Section flange 3: Joints datasheet on page 67. ref: Please PAMRF03. note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive

DN150 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Riser Pieces 150mm long (PFA) bar 13.9 Riser piece 200mm 150mm long long BBB15MT1ZTT BBB15MT1ZFF 15.3 14.0 200mm long 0mm long BBB15MT1VTT BBB15MT1VFF.7.5 0mm long 300mm long BBB15MT1ATT BBB15MT1AFF 18.1 17.0 300mm long BBB15MT1WTT BBB15MT1WFF 19.5 350mm long 19.5 350mm long 186739 1867 19.5 0mm long 20.8 0mm long BBB15MT1XTT BBB15MT1XFF 23.5 Bends Bend 90 90 BBB15CA10TT BBB15CA10FF 220 220 22.5 22.5 45 45 BBB15CB10TT BBB15CB10FF 0 0 18.5 18.5 22.5 22.5 BBB15CD10TT BBB15CD10FF 109 109 28.0 18.0 11. 11. BBB15CE10TT BBB15CE10FF 113 113 19.0 19.0 90 Long Duckfoot radius bend DN80 BBB15CH10TT BBB15CH10FF 220 450 0 30.5 30.0 Duckfoot DN150 DN80 BBB15CF1ETT BBB15CF1EFF 220 220 0 0 31.5.5 All Flange Tee DN80 DN150 BBB15CF10TT BBB15CF10FF 4 220 205 0 28.5 31.5 All Flange Tee DN80 DN100 BBB15TE1ETT BBB15TE1EFF 4 4 210 205 29.5 28.5 DN100 DN150 BBB15TE1FTT BBB15TE1FFF 4 4 220 210 32.5 29.5 All Flange Radial DN150 BBB15TE1JTT BBB15TE1JFF 670 4 450 220 48.5 32.5 All Flange Radial BBB15TW1JTT BBB15TW1JFF 670 450 48.5 All Flange Level Level invert Invert tee DN80 DN80 BBB15TT1ETT BBB15TT1EFF 4 4 220 220 Please enquire 30.0 Cross Cross BBB15XN1JTT BBB15XN1JFF 4 4 220 220 45.0 Please enquire 45 Angle Branch 45 Angle Branch BBB15TU1JTT BBB15TU1JFF 530 530 379 442 47.0 47.0 Concentric Taper Tapers Concentric DN80 DN80 BBB15VE1ETT BBB15VE1EFF 200 200.0.0 DN100 DN100 BBB15VE1FTT BBB15VE1FFF 200 200 15.0 15.0 Flat Taper DN80 BBB15VT1ETT BBB15VT1EFF 0.0 Flat DN80 0.1 DN100 BBB15VT1FTT BBB15VT1FFF 300 15.0 Y Pipe DN100 BBB15YN10TT BBB15YN10FF 300 220 15.0 32.5 Y Pipe Bellmouth BBB15BP10TT BBB15BP10FF 220 155 Please enquire 245 10.0 Hatchbox Bellmouth - 19 155 0 Please enquire 85.0 Loose Loose Puddle Puddle Flange Flange BBB15PF00TT BBB15PF00FF 130 130 390 23.0 23.0 Blank Blank Flange Flange Standard BBB15QN10TT TBB15QN10FF 8.0 8.0 D/T D/T 1" 1" 186674 186678 8.0 8.0 D/T D/T 2" 2" 186675 186679 8.0 8.0 Reducing Flange flange** joint sets are available DN80 to order, please BBB15RM1ETT contact your customer - service representative. 11.0 * Weights are to be used as DN100 a guide. BBB15RM1FTT - 11.0 **Delivered with studs, washers and nuts - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 23 31

Section 2: Product Range DN200 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 65 (PFA) 200bar 28.0 RAPID - 45 65 100 22.0 Bend 90 SSB20CA00TT TSB20CA 64 200 30.0 22.5 65 51 18.8 45 SSB20CB00TT TSB20CB 64 100 24.5 11. 22.5 SSB20CD00TT TSB20CD 65 52 64 51 17.1 20.0 Duckfoot 11. SSB20CE00TT TSB20CE 65 200 64 52 190 Please enquire20.0 Duckfoot SSB20CF00TT SSB20CF00FF 64 200 190 45.5 All Socket Tee DN80 48 170 6.5 All socket tee DN80 SSB20TE0ETT SSB20TE0EFF 64 170 170 26.0 DN100 DN100 SSB20TE0FTT TSB20TE0F 48 195 64 195 170 17027.0 28.5 DN150 DN150 SSB20TE0JTT TSB20TE0J 48 0 64 0 178 178 31.5 33.5 DN200 SSB20TE0KTT TSB20TE0K 64 360 180 42.0 Flange on Double Socket Tee* DN200 DN80 SSB20UD1ETT 48 TSB20UD1E 360 180 170 37.5 2 28.0 Flange on Double DN80** DN100 SSB20UD1FTT TSB20UD1F 170 195 2 24527.0 30.0 Socket Tee DN150 DN100** SSB20UD1JTT TSB20UD1J 195 0 245 245 29.0 35.5 DN200 SSB20UD2KTT TSB20UD2K 360 260 45.5 DN150** Flange on Socket Level invert tee* DN80 SSB20UT1ETT SSB20UT1EFF 0 245 191 35.0 0.0 45 Angle Branch DN200** SSB20TU0KTT SSB20TU0KFF 360 64 500 260 45041.5 58.0 Concentric Flange Taper on Socket Level Invert DN80 DN100 DN150 SSB20VE0FTT SSB20VE0JTT TSB20VE0F TSB20VE0J 64 191 64 230 1 0 18.0 Please enquire17.0 Double Socket Collar SSB20MM00TT SSB20MM00FF 64 170 24.0 45 Angle Branch 48 500 450 58.0 Flange & Socket Piece* SSB20BE20TT TSB20BE2 120 20.5 Flange Tapers & Spigot Concentric Piece DN100 BBB20BU20TT BBB20BU20FF 65 230 0 17.0 23.0 UNIVERSAL DN150 65 1.3 Bend 90 SFB20CA00TT - 64 226 45.0 Flange & Socket Piece** 1* 19.6 45 SFB20CB00TT - 64 109 39.0 Flange & Spigot Piece 22.5 SFB20CD00TT - 0 64 66 22.5 35.5 11. SFB20CE00TT - 64 46 34.0 Cap 65 89 Please enquire All socket tee DN80 SFB20TE0ETT - 64 175 145 42.5 Flange joint sets are available to order, please contact your customer service representative. DN100 SFB20TE0FTT - 64 200 145 46.0 * Weights are to be used as a guide. DN150 SFB20TE0JTT - 64 5 150 52.0 DN200 SFB20TE0KTT - 64 315 155 60.5 Flange on Double Socket Tee* DN80 SFB20UD1ETT - 175 235 43.0 DN100 SFB20UD1FTT - 200 2 45.0 DN150 SFB20UD1JTT - 5 0 50.5 DN200 SFB20UD2KTT - 315 260 57.0 Concentric Taper DN100 SFB20VE0FTT - 64 0 29.0 DN150 SFB20VE0JTT - 64 150 30.0 Flange & Socket Piece* SFB20BE20TT - 1 27.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 32 24 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN200 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Riser Pieces 150mm long (PFA) bar 19.0 Riser piece 150mm long 200mm long BBB20MT2ZTT BBB20MT2ZFF 21.0 21.0 200mm long BBB20MT2VTT BBB20MT2VFF 21.0 0mm long 0mm long BBB20MT2ATT BBB20MT2AFF 23.0 23.0 300mm 300mm long long BBB20MT2WTT BBB20MT2WFF 24.9.0 350mm 0mm long long BBB20MT2XTT BBB20MT2XFF 26.9 31.5 Bend Bends 90 90 BBB20CA20TT BBB20CA20FF 260 260 30.5 31.0 45 BBB20CB20TT BBB20CB20FF 180 27.5 45 22.5 BBB20CD20TT BBB20CD20FF 180 138 27.0 41.0 22.5 11. BBB20CE20TT BBB20CE20FF 138 132.0 36.0 90 Long radius bend 11. BBB20CH20TT BBB20CH20FF 132 500 24.0 45.5 Duckfoot Duckfoot BBB20CF20TT BBB20CF20FF 262 260 198 190 47.0 47.0 All Flange Tee DN80 BBB20TE2ETT BBB20TE2EFF 520 235 33.5 All Flange Tee DN80 DN100 BBB20TE2FTT BBB20TE2FFF 520 235 520 2 32.7 42.5 DN100 DN150 BBB20TE2JTT BBB20TE2JFF 520 520 2 0 34.5 48.0 DN150 DN200 BBB20TE2KTT BBB20TE2KFF 520 520 0 260 39.6 49.0 All Flange Radial DN200 BBB20TW2KTT BBB20TW2KFF 520 760 260 500 49.0 72.5 Level invert tee All Flange Radial DN80 BBB20TT2ETT BBB20TT2EFF 760 520 500 0 72.5 43.0 DN100 BBB20TT2FTT BBB20TT2FFF 520 0 44.0 All Flange Level DN80 520 0 42.5 Cross BBB20XN2KTT BBB20XN2KFF 520 260 67.0 Invert 45 Angle Branch DN100 BBB20TU2KTT BBB20TU2KFF 520 600 0 509 43.5 71.0 Concentric CrossTaper DN80 BBB20VE2ETT BBB20VE2EFF 520 300 260 Please enquire 19.5 45 Angle Branch DN100 BBB20VE2FTT BBB20VE2FFF 604 300 526 71.0 36.0 DN150 BBB20VE2JTT BBB20VE2JFF 300 22.0 Tapers Concentric Flat Taper DN80 DN80 BBB20VT2ETT BBB20VT2EFF 300 600 18.0.5 DN100 DN100 BBB20VT2FTT BBB20VT2FFF 300 600 36.0 27.0 DN150 DN150 BBB20VT2JTT BBB20VT2JFF 300 300 22.0 22.0 Y PipeFlat DN80 BBB20YN20TT BBB20YN20FF 600 260 Please enquire 49.0 Bellmouth DN100 BBB20BP20TT BBB20BP20FF 600 170 310 15.0 Please enquire Hatchbox - 1945 98.5 DN150 300 Please enquire Loose Puddle Flange BBB20PF00TT BBB20PF00FF 130 430 28.0 Y Pipe Blank Flange Standard BBB20QN20TT BBB20QN20FF 260 Please enquire 14.0 Bellmouth D/T 1" 186685 186687 170 310 Please enquire 11.5 Loose Puddle Flange D/T 2" 186686 199894 130 430 28.0 11.5 Reducing Blank flange** Flange Standard DN80 BBB20RM2ETT - 11.3 14.5 D/T DN100 1" BBB20RM2FTT - 11.3 15.0 DN150 D/T 2" BBB20RM2JTT - 11.3.5 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. **Delivered with studs, washers and nuts - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 33

Section 2: Product Range DN0 Push-fit (Rapid) Description Description Allowable Product code Allowable Allowable Key Dimensions Key dimensions Weight Weight Operating Pressure Test Pressure Operating Per Per Unit (PFA) bar Water (PEA) Sewer Pressure bar L mm L H mm mm H mm Unit (kg)* (Kg) (PFA) bar RAPIDBends 90 54 65-3 42.6 Bend 45 90 SSBCA00TT 54 TSBCA 65 136 50 2 32.5 50.5 22.5 45 SSBCB00TT 54 TSBCB 65 50 69 136 27.0 41.5 22.5 SSBCD00TT TSBCD 50 70 33.0 11. 11. SSBCE00TT 54 TSBCE 65 54 50 55 24.5 31.5 Duckfoot Duckfoot SSBCF00TT 54 SSBTE0EFF 65 350 2 262 268.5 68.0 All socket tee DN80 SSBTE0ETT SSBTE0EFF 50 234 183 42.0 All Socket Tee DN80 32 37 234 183 35.5 DN100 SSBTE0FTT TSBTE0F 50 234 183 41.5 DN100 DN150 SSBTE0JTT 32 TSBTE0J 37 234 50 1 183 536.0 46.0 DN150 DN200 SSBTE0KTT 32 TSBTE0K 37 1 50 344 4 845.0 54.5 DN0 SSBTE0LTT TSBTE0L 50 4 202 65.0 DN200 32 37 344 8 48.0 Flange on Double Socket Tee* DN80 SSBUD1ETT TSBUD1E 234 0 44.5 DN0 DN100 SSBUV1FTT 32 TSBUD1F 37 4 234 202 27055.0 44.5 Flange on Double DN150 DN80** SSBUD1JTT TSBUD1J 234 1 0 280 37.0 50.5 Socket Tee DN200 SSBUD2KTT TSBUD2K 344 290 61.0 DN100** 234 270 38.0 DN0 SSBUD2LTT TSBUD2L 4 300 70.0 Flange on Socket Level invert tee* DN150** DN80 SSBUT1ETT SSBUT1EFF 1 217 280 27548.5 37.5 45 Angle Branch DN200** SSBTU0LTT SSBTU0LFF 50 344 550 290 500 52.0 83.0 Concentric Taper DN150 SSBVE0JTT SSBVE0JFF 50 2 26.0 DN0** DN200 SSBVE0KTT TSBVE0K 4 50 300 1 61.0.5 Double Flange Socket on Collar Socket SSBMM00TT SSBMM00FF 50 175 30.0 Flange Level & Socket Invert Piece* SSBBE20TT TSBBE2 135 31.0 DN80 217 275 Please enquire Flange & Spigot Piece BBBBU20TT BBBBU20FF 420 31.5 UNIVERSAL 45 Angle Branch 32 37 550 500 Please enquire Bend Tapers Concentric DN150 90 SFBCA00TT 54 58-2 50 278 24.5 65.0 DN200 45 SFBCB00TT - 50 131 54.5 54 58 1 23.5 22.5 SFBCD00TT - 50 77 49.0 Flange & Socket Piece** 11. SFBCE00TT - 1 50 52 27.5 46.5 All socket Flange tee & Spigot Piece DN80 SFBTE0ETT - 420 50 180 17031.5 56.0 Cap DN100 SFBTE0FTT - 50 200 170 60.0 53 58 96 Please enquire DN150 SFBTE0JTT - 50 260 175 66.5 Flange joint sets are available to DN200 order, please SFBTE0KTT contact your customer - service representative. 50 315 180 75.0 * Weights are to be used as a guide. DN0 SFBTE0LTT - 50 375 190 85.0 Flange on Double Socket Tee* DN80 SFBUD1ETT - 180 265 57.0 DN100 SFBUD1FTT - 200 270 59.0 DN150 SFBUD1JTT - 260 280 65.0 DN200 SFBUD2KTT - 315 290 72.5 DN0 SFBUD2LTT - 375 300 80.0 Concentric Taper DN100 SFBVE0FTT - 50 350 39.5 DN150 SFBVE0JTT - 50 0.5 DN200 SFBVE0KTT - 50 150 42.5 Flange & Socket Piece* SFBBE20TT - 145 37.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 34 26 - For information ** Adjustable on gaskets flanges, and joint sets for (Rapid, bolt Universal lengths and refer flange) to please adjustable refer to Section flange 3: Joints datasheet on page 67. ref: Please PAMRF03. note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive

DN0 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Riser Pieces 0mm long (PFA) bar 23.0 Riser piece Bends 150mm long 90 BBBMT2ZTT BBBMT2ZFF 350 49.0 26.0 0mm long BBBMT2ATT BBBMT2AFF 31.5 45 300mm long BBBMT2WTT BBBMT2WFF 350.3 34.0 Bend 22.5 90 BBBCA20TT BBBCA20FF 190 350 41.0 50.0 11. 45 BBBCB20TT BBBCB20FF 5 350 38.0 52.0 Duckfoot 22.5 BBBCD20TT BBBCD20FF 190 56.0 352 226 76.0 11. BBBCE20TT BBBCE20FF 5 49.0 90 Long All Flange radius bend Tee DN80 BBBCH20TT BBBCH20FF 700 550 265 45.0 65.0 Duckfoot DN100 BBBCF20TT BBBCF20FF 700 350 275 2 48.3 76.0 All Flange Tee DN80 DN150 BBBTE2ETT BBBTE2EFF 700 700 300 265 53.3 66.5 DN100 BBBTE2FTT BBBTE2FFF 700 275 67.0 DN200 DN150 BBBTE2JTT BBBTE2JFF 700 3 700 300 60.0 72.0 DN0 DN200 BBBTE2KTT BBBTE2KFF 700 700 350 3 72.0 73.0 All Flange Radial DN0 BBBTE2LTT BBBTE2LFF 900 700 550 350 106 80.0 All Flange Radial BBBTW2LTT BBBTW2LFF 900 550 106.0 All Flange Level DN80 700 275 66.0 Level invert tee DN80 BBBTT2ETT BBBTT2EFF 700 275 66.0 Invert DN100 DN100 BBBTT2FTT BBBTT2FFF 700 700 275 275 68.5 69.0 Cross DN150 BBBTT2JTT BBBTT2JFF 700 700 350 275 Please enquire 70.0 Cross BBBXN2LTT BBBXN2LFF 700 350 110.5 45 Angle Branch 697 567 Please enquire 45 Angle Branch BBBTU2LTT BBBTU2LFF 700 583 105.0 Concentric Tapers Taper Concentric DN100 DN80 BBBVE2ETT BBBVE2EFF 300 600 30.0 32.0 DN150 DN100 BBBVE2FTT BBBVE2FFF 300 300 28.7.0 DN150 DN200 BBBVE2JTT BBBVE2JFF 300 300 29.0 52.0 DN200 BBBVE2KTT BBBVE2KFF 300 47.0 Flat Flat Taper DN100 DN100 BBBVT2FTT BBBVT2FFF 600 600 34.0 34.0 DN150 DN150 BBBVT2JTT BBBVT2JFF 600 600 38.0 38.0 DN200 DN200 BBBVT2KTT BBBVT2KFF 300 300 29.5 29.5 Y Pipe BBBYN20TT BBBYN20FF 350 81.0 Bellmouth 190 370 21.0 Bellmouth BBBBP20TT BBBBP20FF 190 370 21.0 Hatchbox Loose Puddle Flange - 193399 130 37.0 1.0 Loose Blank Puddle Flange Standard BBBPF00TT BBBPF00FF 130.6 37.0 Blank Flange Standard D/T 1" BBBQN20TT BBBQN20FF.6 17.0 D/T 1" 194129 194131 17.0 D/T 2" D/T 2" 194130 -.6 17.0 Reducing Flange flange** joint sets are available DN80 to order, please BBBRM2ETT contact your customer - service representative. 22.5 * Weights are to be used as a guide. DN100 BBBRM2FTT - 22.0 DN150 BBBRM2JTT - 20.5 DN200 BBBRM2KTT - 21.5 **Delivered with studs, washers and nuts - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 27 35

Section 2: Product Range 36 28 DN300 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 49 64 (PFA) 304bar 63.6 RAPID 45 49-64 7 49.0 Bend 90 SSB30CA00TT TSB30CA 50 304 74.0 22.5 49 64 69 63.0 45 SSB30CB00TT TSB30CB 50 7 60.5 11. 22.5 SSB30CD00TT 49 TSB30CD 64 50 70 37.0 43.5 11. SSB30CE00TT TSB30CE 50 50 41.0 Duckfoot 49 644 0 314 100.0 Duckfoot SSB30CF00TT SSB30CF00FF 50 304 4 100.0 All socket All Socket tee Tee DN80 DN100 SSB30TE0FTT TSB30TE0F 45 189 50 237 196 21348.0 58.0 DN150 SSB30TE0JTT TSB30TE0J 50 347 195 68.5 DN100 45 237 213 49.0 DN200 SSB30TE0KTT TSB30TE0K 50 347 198 70.5 DN150 DN0 SSB30TE0LTT TSB30TE0L 45 347 50 467 195 20760.0 85.5 DN300 DN200 SSB30TE0MTT TSB30TE0M 45 50 347 467 198 234 62.0 92.0 Flange on Double Socket Tee* DN80 SSB30UD1ETT TSB30UD1E 237 298 59.0 DN0 DN100 SSB30UV1FTT TSB30UD1F 45 467 237 207 30076.5 59.5 DN300 DN150 SSB30UD1JTT TSB30UD1J 45 467 347 233 31081.5 72.5 DN200 SSB30UD2KTT TSB30UD2K 347 320 77.0 Flange on Double DN80** DN0 SSB30UD2LTT TSB30UD2L 237 467 298 305 49.5 89.0 Socket Tee DN100** DN300 SSB30UD2MTT TSB30UD2M 237 467 300 351.0 98.5 Flange on Socket Level invert tee* DN80 SSB30UT1ETT SSB30UT1EFF 220 305 50.0 DN150** 347 310 63.0 45 Angle Branch SSB30TU0MTT SSB30TU0MFF 50 570 500 110.0 Concentric Taper DN200** DN150 SSB30VE0JTT SSB30VE0JFF 347 50 322 320 66.5 36.5 DN200 SSB30VE0KTT TSB30VE0K 50 222 36.0 DN0** 467 305 82.5 DN0 SSB30VE0LTT TSB30VE0L 50 123 36.0 Double Socket Collar DN300** SSB30MM00TT SSB30MM00FF 467 50 180 3 89.5 39.0 Flange & Socket Piece* SSB30BE20TT TSB30BE2 130 42.0 Flange on Socket DN80 220 305 50.0 Flange & Spigot Piece BBB30BU20TT BBB30BU20FF 4 42.5 Level Invert UNIVERSAL DN100 52.5 Bend 90 SFB30CA00TT - 50 329 94.0 45 Angle Branch 30 570 500 151 45 SFB30CB00TT - 50 153 78.0 Tapers Concentric DN150 22.5 SFB30CD00TT 49 64-322 50 89 34.5 70.5 11. SFB30CE00TT - 50 59 66.5 DN200 49 64 222 33.0 All socket tee DN80 SFB30TE0ETT - 50 180 195 75.0 DN0 DN100 SFB30TE0FTT 49 64-123 50 205 19529.0 78.5 DN150 SFB30TE0JTT - 50 260 200 85.5 Flange & Socket Piece** DN200 SFB30TE0KTT - 130 50 320 38.0 205 95.0 Flange & Spigot Piece DN0 SFB30TE0LTT - 4 50 435 21542.0 108.0 DN300 SFB30TE0MTT - 50 435 220 150.5 Cap Flange on Double Socket Tee* DN80 47 SFB30UD1ETT 52-104 180 Please enquire 295 77.0 Flange joint sets are available to DN100 order, please SFB30UD1FTT contact your customer - service representative. 205 300 80.0 * Weights are to be used as a guide. DN150 SFB30UD1JTT - 260 310 87.5 DN200 SFB30UD2KTT - 320 320 95.5 DN0 SFB30UD2LTT - 435 330 108.5 DN300 SFB30UD2MTT - 435 3 136.5 Concentric Taper DN150 SFB30VE0JTT - 50 350 55.5 DN200 SFB30VE0KTT - 50 0 58.0 DN0 SFB30VE0LTT - 50 150 58.0 Flange & Socket Piece* SFB30BE20TT - 150 51.5 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive

DN300 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Riser Pieces 0mm long (PFA) bar 41.3 Riser piece 0mm long 300mm long BBB30MT2ATT BBB30MT2AFF 44.7 41.5 300mm long BBB30MT2WTT BBB30MT2WFF 45.0 500mm long 500mm long BBB30MT2BTT BBB30MT2BFF 58.0 58.0 Bend Bends 90 90 BBB30CA20TT BBB30CA20FF 0 0 69.0 69.5 45 45 BBB30CB20TT BBB30CB20FF 0 0 76.0 74.0 22.5 BBB30CD20TT BBB30CD20FF 210 73.0 22.5 210 56.0 11. BBB30CE20TT BBB30CE20FF 175 62.0 90 Long radius bend 11. BBB30CH20TT BBB30CH20FF 175 600 49.0 89.5 Duckfoot Duckfoot BBB30CF20TT BBB30CF20FF 0 0 7 5 Please enquire 108.0 All Flange Tee All Flange Tee DN80 DN80 BBB30TE2ETT BBB30TE2EFF 800 800 290 290 59.5 94.5 DN100 BBB30TE2FTT BBB30TE2FFF 800 300 93.0 DN100 DN150 BBB30TE2JTT BBB30TE2JFF 800 305 800 3 62.0 100.0 DN150 DN200 BBB30TE2KTT BBB30TE2KFF 800 800 3 350 68.7 93.0 DN0 DN200 BBB30TE2LTT BBB30TE2LFF 800 800 350 380 101 108.0 DN300 BBB30TE2MTT BBB30TE2MFF 800 0 109.5 All Flange Radial DN0 BBB30TW2MTT BBB30TW2MFF 800 380 1000 600 85.0 146.0 Level invert tee DN300 DN80 BBB30TT2ETT BBB30TT2EFF 800 800 0 305 85.0 92.0 All Flange Radial DN100 BBB30TT2FTT BBB30TT2FFF 1000 800 600 305 146.0 96.0 DN150 BBB30TT2JTT BBB30TT2JFF 800 305 99.0 All Flange Level DN100 800 305 95.6 Cross BBB30XN2MTT BBB30XN2MFF 800 0 148.0 Invert 45 Angle Branch DN150 BBB30TU2MTT BBB30TU2MFF 800 800 305 665 99.0 149.0 Concentric 45 Angle Taper Branch DN80 BBB30VE2ETT BBB30VE2EFF 797 700 642 147 48.0 Tapers Concentric DN100 DN80 BBB30VE2FTT BBB30VE2FFF 700 300 43.0 41.0 DN150 BBB30VE2JTT BBB30VE2JFF 300 61.0 DN100 DN200 BBB30VE2KTT BBB30VE2KFF 300 300 41.0 58.0 DN150 DN0 BBB30VE2LTT BBB30VE2LFF 300 300 42.0 72.0 Flat Taper DN200 DN150 BBB30VT2JTT BBB30VT2JFF 300 600 39.8 46.0 DN200 BBB30VT2KTT BBB30VT2KFF 600 51.0 DN0 300 38.8 DN0 BBB30VT2LTT BBB30VT2LFF 300 39.5 Y PipeFlat DN150 BBB30YN20TT BBB30YN20FF 600 0 46.0 115.0 Bellmouth DN200 BBB30BP20TT BBB30BP20FF 600 210 435 51.0 29.0 Hatchbox DN0-1932 300 39.0 188.0 Loose Puddle Flange BBB30PF00TT BBB30PF00FF 130 555 46.0 Bellmouth Blank Flange Standard BBB30QN20TT BBB30QN20FF 210 435 29.0 26.5 Loose Puddle Flange D/T 1" 193047 193050 130 555 46.0 23.5 Blank Flange Standard D/T 2" 193048 193051 23.5 23.5 Reducing flange** D/T DN80 1" BBB30RM2ETT - 23.5 32.0 D/T DN100 2" BBB30RM2FTT - 23.5 30.0 Flange joint sets are available DN150 to order, please BBB30RM2JTT contact your customer - service representative. 36.0 * Weights are to be used as DN200 a guide. BBB30RM2KTT -.0 DN0 BBB30RM2LTT - 43.0 **Delivered with studs, washers and nuts ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables 29 37

Section 2: Product Range DN350 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 45 59 (PFA) 390bar 83.0 RAPID 45 45-59 8 61.0 Bend 90 SSB35CA00TT TSB35CA 50 390 115.0 22.5 45 59 78 50.0 45 SSB35CB00TT TSB35CB 50 8 75.0 11. 22.5 SSB35CD00TT 45 TSB35CD 59 53 50 78 44.0 53.0 All Socket Tee DN100 11. SSB35CE00TT TSB35CE 30 2 50 53 2 70.5 49.0 Duckfoot SSB35CF00TT SSB35CF00FF 50 390 4 135.0 DN200 365 245 Please enquire All Socket Tee DN350 SSB35TE0YTT SSB35TE0YFF 50 495 0 110.0 Flange on Double Socket Tee* DN0 DN80 SSB35UD1ETT TSB35UD1E 365 194 5 Please 310 enquire73.5 DN100 DN350 SSB35UV1FTT TSB35UD1F 30 495 194 380 330 102 90.5 DN150 SSB35UD1JTT TSB35UD1J 314 3 88.5 Flange on Double DN80** 194 310 58.5 DN200 SSB35UD2KTT TSB35UD2K 314 350 92.5 Socket Tee DN100** DN0 SSB35UD2LTT TSB35UD2L 194 369 330 36059.5 104.0 DN150** DN300 SSB35UD2MTT TSB35UD2M 314 485 3 37074.0 119.5 DN350 DN350** SSB35UD2YTT TSB35UD2Y 485 485 380 380 117 132.0 Flange on Socket Level invert tee* DN150 SSB35UT1JTT SSB35UT1JFF 339 3 60.5 Flange on Socket Concentric Taper DN200 SSB35VE0KTT TSB35VE0K 50 335 54.5 Level Invert DN150 DN0 SSB35VE0LTT TSB35VE0L 334 50 260 3 85.5 52.0 Tapers Concentric DN200 DN300 SSB35VE0MTT 45 TSB35VE0M 59 335 50 187 45.6 55.0 Flange & Socket Piece* DN0 SSB35BE20TT 45 TSB35BE2 59 260 135 44.0 59.5 Flange & Spigot Piece DN300 BBB35BU20TT 45 BBB35BU20FF 59 187 460 43.0 57.5 End Cap Flange & Socket Piece** Socket Use spigot cap - - 135* 48.6 - Spigot 158079 - - 0.2 Flange & Spigot Piece 460 55.6 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. - For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 38 30 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN350 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 350 bar 126 Bend 90 45 BBB35CA20TT BBB35CA20FF 298 450 106 96.0 45 BBB35CB20TT BBB35CB20FF 298 82.0 22.5 22.5 BBB35CD20TT BBB35CD20FF 210 210 107 83.0 11. 11. BBB35CE20TT BBB35CE20FF 191 190 108 83.5 90º Long Duckfoot Radius Bend BBB35CH20TT BBB35CH20FF 450 650 290 196 121.0 Duckfoot All Flange Tee DN80 BBB35CF20TT BBB35CF20FF 850 450 3 294 152 5.0 All Flange Tee DN100 DN80 BBB35TE2ETT BBB35TE2EFF 850 850 3 3 154 120.0 DN100 DN150 BBB35TE2FTT BBB35TE2FFF 850 850 3 3 155 122.0 DN150 DN200 BBB35TE2JTT BBB35TE2JFF 850 850 3 3 159 123.0 DN200 BBB35TE2KTT BBB35TE2KFF 850 3 141.5 DN0 DN0 BBB35TE2LTT BBB35TE2LFF 850 3 850 3 1 132.0 DN300 DN300 BBB35TE2MTT BBB35TE2MFF 850 850 4 4 177 144.0 DN350 DN350 BBB35TE2YTT BBB35TE2YFF 850 850 4 4 194 153.0 All Flange Radial All Flange Radial BBB35TW2YTT BBB35TW2YFF 1100 1100 650 650 304 204.0 Level invert tee All Flange Level DN150 DN100 BBB35TT2JTT BBB35TT2JFF 850 850 3 3 170 128.0 Concentric Taper DN150 BBB35VE2JTT BBB35VE2JFF 600 47.0 Invert DN150 850 3 176 DN200 BBB35VE2KTT BBB35VE2KFF 600 60.5 Tapers Concentric DN200 DN0 BBB35VE2LTT BBB35VE2LFF 600 300 71.0 58.0 DN0 DN300 BBB35VE2MTT BBB35VE2MFF 300 300 77.0 52.5 Flat Taper DN300 DN200 BBB35VT2KTT BBB35VT2KFF 300 600 84.0 60.5 Flat DN200 DN0 BBB35VT2LTT BBB35VT2LFF 600 600 71.0 67.0 DN0 DN300 BBB35VT2MTT BBB35VT2MFF 600 300 77.0 52.0 Bellmouth DN300 BBB35BP20TT BBB35BP20FF 300 2 495 84.0 39.0 Loose Bellmouth Puddle Flange BBB35PF00TT BBB35PF00FF 2 150 495 660 51.0 50.0 Blank Flange Loose Puddle Flange BBB35QN20TT BBB35QN20FF 150 660 62.0 37.5 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Blank Flange 46.0 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 31 39

Section 2: Product Range DN0 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 42 56 (PFA) 436bar 113 RAPID 45 42-56 189 82.5 Bend 90 SSBCA00TT TSBCA 436 141.0 22.5 42 56 92 66.0 45 SSBCB00TT TSBCB 189 88.5 11. 22.5 SSBCD00TT 42 TSBCD 56 58 92 58.0 68.5 All Socket Tee DN80 11. SSBCE00TT TSBCE 30 210 58 7 88.5 61.5 Duckfoot SSBCF00TT SSBCF00FF 436 324 182.0 DN100 210 7 Please enquire All Socket Tee DN0 SSBTE0NTT SSBTE0NFF 560 280 128.0 Flange on Double Socket Tee* DN200 DN80 SSBUD1ETT TSBUD1E 3 195 260 Please 3 enquire86.5 DN300 DN100 SSBUV1FTT TSBUD1F 30 4 195 270 360 130 86.0 DN150 SSBUD1JTT TSBUD1J 315 370 102.5 DN0 DN200 SSBUD2KTT 30 TSBUD2K 560 280 315 137 380 107.0 Flange on Double DN80** DN0 SSBUD2LTT TSBUD2L 195 429 3 39074.0 124.5 Socket Tee DN300 DN100** SSBUD2MTT TSBUD2M 195 429 360 0 75.0 136.0 DN0 SSBUD2NTT TSBUD2N 545 420 8.5 DN200** Flange on Socket Level invert tee* DN100 SSBUT1FTT SSBUT1FFF 315 380 226 91.5 365 76.0 Concentric Taper DN300** DN0 SSBVE0LTT TSBVE0L 429 335 0 138 65.0 DN300 DN0** SSBVE0MTT TSBVE0M 545 260 420 156 60.0 DN350 SSBVE0YTT TSBVE0Y 176 62.0 Double Flange Socket on Collar Socket Level Invert Flange & Socket Piece* DN100 SSBMM00TT SSBBE20TT SSBMM00FF TSBBE2 226 190 1 365 76.0 52.0 69.0 Flange & Spigot Piece Tapers Concentric DN0 BBBBU20TT 42 BBBBU20FF 56 335 480 59.5 70.0 End Cap Socket 110064 - - 0.2 DN300 Spigot 42110065 56-480 - 58.0 0.2 UNIVERSAL DN350 42 56 176 53.0 Bend 90 SFBCA00TT - 430 141.0 Flange & Socket Piece** 1 62.5 45 SFBCB00TT - 195 109.0 Flange & Spigot Piece 22.5 SFBCD00TT - 480 110 70.0 93.5 Flange joint sets are available to 11. order, please SFBCE00TT contact your customer - service representative. 65 84.5 Flange * Weights on Double are Socket to be Tee* used as a guide. DN80 SFBUD1ETT - 185 355 85.5 DN100 SFBUD1FTT - 210 360 98.0 DN150 SFBUD1JTT - 270 370 106.5 DN200 SFBUD2KTT - 3 380 115.5 DN300 SFBUD2MTT - 4 0 138.0 DN0 SFBUD2NTT - 560 420 170.0 Concentric Taper DN300 SFBVE0MTT - 260 86.5 Flange & Socket Piece* SFBBE20TT - 0 62.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 32 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN0 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 500 bar 126 Bend 90 45 BBBCA20TT BBBCA20FF 324 500 106 126.0 45 BBBCB20TT BBBCB20FF 326 106.0 22.5 22.5 BBBCD20TT BBBCD20FF 239 239 107 107.0 11. 11. BBBCE20TT BBBCE20FF 205 205 108 1.0 90º Long Duckfoot Radius Bend BBBCH20TT BBBCH20FF 500 700 320 196 157.0 Duckfoot BBBCF20TT BBBCF20FF 500 324 218.0 All Flange Tee DN80 900 350 152 All Flange Tee DN80 BBBTE2ETT BBBTE2EFF 900 350 7.0 DN100 DN100 BBBTE2FTT BBBTE2FFF 900 900 350 350 154 154.0 DN150 DN150 BBBTE2JTT BBBTE2JFF 900 900 350 350 155 155.0 DN200 DN200 BBBTE2KTT BBBTE2KFF 900 900 350 350 159 159.0 DN0 BBBTE2LTT BBBTE2LFF 900 350 1.0 DN0 DN300 BBBTE2MTT BBBTE2MFF 900 350 900 450 1 177.0 DN300 DN350 BBBTE2YTT BBBTE2YFF 900 900 450 450 177 201.5 DN0 DN0 BBBTE2NTT BBBTE2NFF 900 900 450 450 194 194.0 All Flange Radial BBBTW2NTT BBBTW2NFF 1200 700 278.0 All Flange Radial 1200 700 304 Level invert tee DN80 BBBTT2ETT BBBTT2EFF 900 365 153.0 All Flange Level DN100 DN100 BBBTT2FTT BBBTT2FFF 900 900 365 365 170 156.0 Invert DN150 DN150 BBBTT2JTT BBBTT2JFF 900 900 365 365 176 2.0 Cross Tapers Concentric DN200 BBBXN2NTT BBBXN2NFF 300 900 450 71.0 234.0 45º Angle branch BBBTU2NTT BBBTU2NFF 960 145 215.0 Concentric Taper DN0 DN200 BBBVE2KTT BBBVE2KFF 300 300 77.0 60.0 DN300 DN0 BBBVE2LTT BBBVE2LFF 300 300 84.0 69.5 DN300 DN350 BBBVE2MTT BBBVE2MFF 300 300 67.0 113.5 DN350 BBBVE2YTT BBBVE2YFF 300 70.0 Flat DN200 600 71.0 Flat Taper DN200 BBBVT2KTT BBBVT2KFF 600 71.0 DN0 DN0 BBBVT2LTT BBBVT2LFF 600 600 77.0 77.0 DN300 DN300 BBBVT2MTT BBBVT2MFF 600 600 84.0 84.0 DN350 BBBVT2YTT BBBVT2YFF 300 67.0 DN350 300 67.0 Y Pipe BBBYN20TT BBBYN20FF 500 220.0 Bellmouth Bellmouth BBBBP20TT BBBBP20FF 2 0 560 560 51.0 51.0 Loose Loose Puddle Puddle Flange Flange BBBPF00TT BBBPF00FF 150 150 660 660 62.0 62.0 Blank Flange Blank Flange BBBQN20TT BBBQN20FF 46.0 46.0 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 33 41

Section 2: Product Range DN450 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 53 (PFA) 480bar 143 RAPID 45-53 2 103 Bend 90 SSB45CA00TT TSB45CA 482 144.0 22.5 53 100 81.5 45 SSB45CB00TT TSB45CB 2 118.0 11. 22.5 SSB45CD00TT TSB45CD 53 67 100 71.5 88.0 All Socket Tee DN450 11. SSB45CE00TT TSB45CE 30 635 67 318 171 79.5 Duckfoot SSB45CF00TT SSB45CF00FF 482 355 234.0 Flange on Double DN80** 315 375 88.0 All Socket Tee DN450 SSB45TE0PTT SSB45TE0PFF 635 318 171.0 Socket Tee Flange on Double Socket Tee* DN100** DN80 SSB45UD1ETT TSB45UD1E 315 315 395 37589.0 111.0 DN150** DN100 SSB45UV1FTT SSB45UV1FFF 315 315 0 395 108 89.0 DN150 SSB45UD1JTT SSB45UD1JFF 315 0 102.0 DN300** DN200 SSB45UD2KTT SSB45UD2KFF 600 430 315 147 410 115.0 DN450** DN0 SSB45UD2LTT SSB45UD2LFF 600 600 460 420 196 129.5 Flange on Socket DN300 DN100 SSB45UD2MTT TSB45UD2M 229 600 380 430 90.0 155.5 Level Invert DN0 SSB45UD2NTT SSB45UD2NFF 600 450 188.5 DN150 345 380 Please enquire DN450 SSB45UD2PTT SSB45UD2PFF 600 460 178.5 Flange Tapers on Socket Concentric Level invert tee* DN300 DN100 SSB45UT1FTT SSB45UT1FFF 53 335 229 38075.0 90.0 DN350 DN150 SSB45UT1JTT SSB45UT1JFF 53 234 345 38069.3 115.0 Concentric Taper DN300 SSB45VE0MTT TSB45VE0M 335 85.0 DN0 53 6 66.0 DN350 SSB45VE0YTT TSB45VE0Y 234 84.0 Flange & Socket Piece** DN0 SSB45VE0NTT TSB45VE0N 145 6 75.5 84.0 Double Flange Socket & Collar Spigot Piece SSB45MM00TT SSB45MM00FF 500 195 86.0 69.0 Flange & Socket Piece* SSB45BE20TT TSB45BE2 145 88.5 Flange joint sets are available to order, please contact your customer service representative. Flange & Spigot Piece BBB45BU20TT BBB45BU20FF 500 86.0 * Weights are to be used as a guide. * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 42 34 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN450 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 550 bar 126 Bend 90 45 BBB45CA20TT BBB45CA20FF 349 550 212 221.0 45 BBB45CB20TT BBB45CB20FF 350 134.0 22.5 22.5 BBB45CD20TT BBB45CD20FF 349 349 214 135.0 11. 11. BBB45CE20TT BBB45CE20FF 349 349 2 135.0 90º Long Duckfoot Radius Bend BBB45CH20TT BBB45CH20FF 550 750 355 196 197.0 Duckfoot BBB45CF20TT BBB45CF20FF 550 355 289.0 All Flange Tee DN80 950 375 152 All Flange Tee DN80 BBB45TE2ETT BBB45TE2EFF 950 375 187.0 DN100 DN100 BBB45TE2FTT BBB45TE2FFF 950 950 375 375 154 188.0 DN150 DN100* BAB45UE2FTT BAB45UE2FFF 950 375 155 153.5 DN150 DN200 BBB45TE2JTT BBB45TE2JFF 950 950 375 375 159 190.0 DN200 BBB45TE2KTT BBB45TE2KFF 950 375 193.0 DN0 DN0 BBB45TE2LTT BBB45TE2LFF 950 375 950 375 1 197.0 DN300 DN300 BBB45TE2MTT BBB45TE2MFF 950 950 375 475 177 213.0 DN350 DN350 BBB45TE2YTT BBB45TE2YFF 950 950 475 475 Please enquire 221.0 DN0 DN450 BBB45TE2NTT BBB45TE2NFF 950 950 475 475 194 229.0 DN450 BBB45TE2PTT BBB45TE2PFF 950 475 237.0 All Flange Radial All Flange Radial BBB45TW2PTT BBB45TW2PFF 1300 750 1300 750 304 368.0 Level All invert Flange tee Level DN100 BBB45TT2FTT BBB45TT2FFF 950 950 380 380 170 189.0 Invert DN150 DN150 BBB45TT2JTT BBB45TT2JFF 950 950 380 380 176 197.0 Concentric Taper DN0 BBB45VE2LTT BBB45VE2LFF 600 87.5 Tapers Concentric DN0 600 94.6 DN300 BBB45VE2MTT BBB45VE2MFF 600 95.0 DN300 DN350 BBB45VE2YTT BBB45VE2YFF 600 600 103 104.0 DN350 DN0 BBB45VE2NTT BBB45VE2NFF 600 300 112 81.0 Y Pipe BBB45YN20TT BBB45YN20FF 550 280.0 DN0 300 89.3 Bellmouth BBB45BP20TT BBB45BP20FF 260 620 63.0 Loose Bellmouth Puddle Flange BBB45PF00TT BBB45PF00FF 260 150 620 Please enquire 7 73.0 Blank Loose FlangePuddle Flange BBB45QN20TT BBB45QN20FF 150 7 73.0 64.0 Blank Flange 60.0 * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83. - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 35 43

Section 2: Product Range 44 36 DN500 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensions Per Weight (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Per Unit Water Sewer Pressure L mm H mm Unit (Kg) (Kg) Bends 90 38 51 (PFA) 5bar 183 RAPID - 45 38 51 220 130 Bend 90 SSB50CA00TT TSB50CA 5 2.0 Bends 90 SSB50CA00TT TSB50CA 5 2.0 22.5 45 SSB50CB00TT 38 TSB50CB 51 110 220 103 146.0 45 SSB50CB00TT TSB50CB 220 146.0 11. 22.5 22.5 SSB50CD00TT SSB50CD00TT 38 TSB50CD TSB50CD 51 71 110 110 90.0 108.0 108.0 11. SSB50CE00TT TSB50CE 71 96.0 All Socket Tee DN80 11. SSB50CE00TT TSB50CE 230 71 3 Please enquire96.0 Duckfoot SSB50CF00TT SSB50CF00FF 5 389 280.0 Duckfoot SSB50CF00TT SSB50CF00FF 280.0 All Socket Tee DN100DN500 SSB50TE0QTT SSB50TE0QFF 230 680 3 3 Please enquire 204.0 All Socket Tee DN500 SSB50TE0QTT SSB50TE0QFF 680 3 204.0 Flange on Double Socket Tee* Flange on Double Socket Tee* DN80 DN200 DN80 SSB50UD1ETT SSB50UD1ETT TSB50UD1E TSB50UD1E 330 210 230 3 415 111.0 Please 3 enquire111.0 DN100 SSB50UV1FTT TSB50UD1F 210 420 121.5 DN300 DN100 SSB50UV1FTT TSB50UD1F 450 230 320 Please 3 enquire 121.5 DN150 SSB50UD1JTT TSB50UD1J 3 430 143.0 DN150 SSB50UD1JTT TSB50UD1J 3 430 143.0 DN500DN200 SSB50UD2KTT TSB50UD2K 30 680 3 3 4 90.0 150.5 DN200 SSB50UD2KTT TSB50UD2K 3 4 150.5 DN0 SSB50UD2LTT TSB50UD2L 443 450 173.0 Flange on Double DN80** DN0 SSB50UD2LTT TSB50UD2L 210 443 0 450 107 173.0 DN300 SSB50UD2MTT TSB50UD2M 443 460 180.5 Socket Tee DN100** DN300 SSB50UD2MTT TSB50UD2M 210 443 420 460 108 180.5 DN0 SSB50UD2NTT TSB50UD2N 555 480 221.0 DN0 DN150** DN500 SSB50UD2NTT SSB50UD2QTT TSB50UD2N TSB50UD2Q 3 555 675 430 480 500 130 221.0 280.5 Flange on Socket Level invert tee* DN150 DN500 SSB50UT1JTT SSB50UD2QTT SSB50UT1JFF TSB50UD2Q 348 675 0 500 280.5 133.0 DN300** 443 460 182 Flange Concentric on Socket Taper Level invert tee* DN350 DN150 SSB50VE0YTT SSB50UT1JTT SSB50UT1JFF TSB50VE0Y 378 348 0 133.0 88.5 Concentric Taper DN0** DN0 DN350 SSB50VE0NTT SSB50VE0YTT TSB50VE0N TSB50VE0Y 555 290 378 480 236 88.5 86.5 DN0 DN500** DN450 SSB50VE0PTT SSB50VE0NTT SSB50VE0PFF TSB50VE0N 675 0 290 500 2 86.5 80.0 Flange & Socket Piece* DN450 SSB50BE20TT SSB50VE0PTT TSB50BE2 TSB50VE0P 170 0 80.0 98.0 Flange on Socket Flange Flange & Socket Spigot Piece* BBB50BU20TT SSB50BE20TT BBB50BU20FF TSB50BE2 520 170 98.0 109.0 Level Invert Flange End Cap& Spigot Piece DN150Socket BBB50BU20TT 110107 BBB50BU20FF - 348-520 0 108 109.0 3.0 End Cap Tapers Concentric Socket DN350Spigot 110107 38110108-51- - 378-90.5 3.0 3.0 UNIVERSAL Spigot 110108 - - 3.0 DN0 38 51 290 86.5 UNIVERSAL Bend 90 SFB50CA00TT - 550 235.0 Bends DN450 45 90 SFB50CB00TT SFB50CA00TT 38 51- - 0 2 550 80.5 235.0 176.0 Flange & Socket Piece** 22.5 45 SFB50CD00TT SFB50CB00TT - - 170 130 2 97.0 176.0 148.0 11. 22.5 SFB50CE00TT SFB50CD00TT - - 75 130 148.0 133.0 Flange & Spigot Piece 11. SFB50CE00TT - 520 75 109 Flange on Double Socket Tee* DN80 SFB50UD1ETT - 215 415 133.0 146.5 Flange Flange on Double joint Socket sets are Tee* available to DN100 DN80 order, please SFB50UD1FTT SFB50UD1ETT contact your customer - - service representative. 215 215 420 415 146.5 147.5 * Weights are to be used as a guide. DN150 DN100 SFB50UD1JTT SFB50UD1FTT - - 330 215 430 420 147.5 6.0 DN200 DN150 SFB50UD2KTT SFB50UD1JTT - - 330 330 4 430 6.0 9.5 DN0 DN200 SFB50UD2LTT SFB50UD2KTT - - 450 330 450 4 9.5 190.0 DN300 DN0 SFB50UD2MTT SFB50UD2LTT - - 450 450 470 450 190.0 197.5 DN0 DN300 SFB50UD2NTT SFB50UD2MTT - - 565 450 480 470 197.5 231.5 DN500 DN0 SFB50UD2QTT SFB50UD2NTT - - 680 565 500 480 231.5 267.5 Concentric Taper DN0 DN500 SFB50VE0NTT SFB50UD2QTT - - 260 680 500 267.5 1.0 Taper Flange & Socket Piece* DN0 SFB50BE20TT SFB50VE0NTT - - 170 260 1.0 88.0 Flange Socket SFB50BE20TT - 170 88.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant *- Product Weights offered are provided with adjustable for estimation flange. purposes For information only and on actual bolt values lengths, may please vary refer from to those datasheet provided PAMRF03 in these tables - Codes starting with T are gasket inclusive For information on Joint Sets please see page xx. All our Joint sets are CESWI 7th edition compliant Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN500 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 (PFA) 600 bar 210 RAPID 45-375 174 Bends 22.5 90 BBB50CA20TT SSB50CA00TT BBB50CA20FF TSB50CA 375 5 600 176 2.0 287.0 11. 45 BBB50CB20TT SSB50CB00TT BBB50CB20FF TSB50CB 220 375 146.0 174.0 375 177 22.5 BBB50CD20TT SSB50CD00TT BBB50CD20FF TSB50CD 110 375 108.0 210.0 Duckfoot 11. BBB50CE20TT SSB50CE00TT BBB50CE20FF TSB50CE 600 375 71 385 322 179.0 96.0 90º Duckfoot Long All Radius Flange Bend Tee DN100** BBB50CH20TT SSB50CF00TT BBB50CH20FF SSB50CF00FF 1000 800 0 241 280.0 2.0 Duckfoot All Socket Tee DN150 DN500 SSB50TE0QTT BBB50CF20TT SSB50TE0QFF BBB50CF20FF 1000 680 600 0 389 3 241 204.0 373.0 All Flange Flange on Tee Double Socket Tee* DN80 SSB50UD1ETT BBB50TE2ETT BBB50TE2EFF TSB50UD1E 1000 230 0 3 111.0 260.0 DN300 DN100 SSB50UV1FTT BBB50TE2FTT BBB50TE2FFF TSB50UD1F 1000 1000 500 230 0 8 3 121.5 261.0 DN500 DN150 SSB50UD1JTT BBB50TE2JTT BBB50TE2JFF TSB50UD1J 1000 1000 3 500 0 430 304 143.0 241.0 All Flange Radial DN200 SSB50UD2KTT BBB50TE2KTT BBB50TE2KFF TSB50UD2K 10 1000 3 800 0 4 564 150.5 246.0 DN0 SSB50UD2LTT BBB50TE2LTT BBB50TE2LFF TSB50UD2L 1000 443 0 450 173.0 274.0 All Flange Level Invert DN300 DN300 SSB50UD2MTT BBB50TE2MTT BBB50TE2MFF TSB50UD2M 1000 443 500 460 290.0 180.5 DN150 1000 0 267 DN0 DN350 SSB50UD2NTT BBB50TE2YTT BBB50TE2YFF TSB50UD2N 1000 555 500 480 345.0 221.0 Tapers Concentric DN0 DN500 DN0 SSB50UD2QTT BBB50TE2NTT BBB50TE2NFF TSB50UD2Q 700 1000 675 500 500 114 3.0 280.5 Flange on Socket Level invert tee* DN300 DN150 DN450 BBB50TE2PTT SSB50UT1JTT BBB50TE2PFF SSB50UT1JFF 600 1000 348 500 0 111 290.0 133.0 Concentric Taper DN350 DN500 BBB50TE2QTT SSB50VE0YTT BBB50TE2QFF TSB50VE0Y 1000 378 500 304.0 88.5 DN350 600 121 All Flange Radial DN0 BBB50TW2QTT SSB50VE0NTT BBB50TW2QFF TSB50VE0N 10 290 800 564.0 86.5 Level invert tee DN0 DN450 DN100 BBB50TT2FTT SSB50VE0PTT BBB50TT2FFF TSB50VE0P 600 1000 0 0 130 241.0 80.0 Flange & Socket Piece* DN450 DN150 SSB50BE20TT BBB50TT2JTT BBB50TT2JFF TSB50BE2 600 1000 170 0 102 248.0 98.0 Cross Flange Bellmouth & Spigot Piece BBB50XN2QTT BBB50BU20TT BBB50XN2QFF BBB50BU20FF 280 1000 520 685 500 83 109.0 361.0 45º Angle branch BBB50TU2QTT BBB50TU2QFF 1200 850 429.0 End Cap Socket 110107 - - 3.0 Concentric Loose Taper Puddle Flange DN0 BBB50VE2LTT BBB50VE2LFF 150 700 790 85 114.0 Spigot 110108 - - 3.0 UNIVERSAL Blank Flange DN300 BBB50VE2MTT BBB50VE2MFF 600 80 147.5 DN350 BBB50VE2YTT BBB50VE2YFF Bends Flange joint sets are available to order, 90 please SFB50CA00TT contact your customer - service representative. 600 550 133.0 235.0 * Weights are to be used as a guide. DN0 45 BBB50VE2NTT SFB50CB00TT BBB50VE2NFF - 600 2 152.0 176.0 DN450 22.5 BBB50VE2PTT SFB50CD00TT BBB50VE2PFF - 600 130 189.0 148.0 Flat Taper DN0 11. BBB50VT2LTT SFB50CE00TT BBB50VT2LFF - 500 75 1.0 133.0 Flange on Double Socket Tee* DN300 DN80 BBB50VT2MTT SFB50UD1ETT BBB50VT2MFF - 500 215 415 144.0 146.5 DN350 DN100 BBB50VT2YTT SFB50UD1FTT BBB50VT2YFF - 500 215 420 151.0 147.5 DN0 DN150 BBB50VT2NTT SFB50UD1JTT BBB50VT2NFF - 500 330 430 172.0 6.0 Bellmouth DN200 BBB50BP20TT SFB50UD2KTT BBB50BP20FF - 300 330 685 4 83.0 9.5 Loose Puddle Flange DN0 BBB50PF00TT SFB50UD2LTT BBB50PF00FF - 150 450 790 450 85.0 190.0 Blank Flange DN300 BBB50QN20TT SFB50UD2MTT BBB50QN20FF - 450 470 84.0 197.5 DN0 SFB50UD2NTT - 565 480 231.5 DN500 SFB50UD2QTT - 680 500 267.5 Taper DN0 SFB50VE0NTT - 260 1.0 Flange Socket SFB50BE20TT - 170 88.0 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 37 45

Section 2: Product Range DN600 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensions Per Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 36 48 (PFA) 624 bar 273 RAPID 45 36 48-283 191 Bends 22.5 90 SSB50CA00TT SSB60CA00TT 36 TSB50CA TSB60CA 48 1 5 624 147 2.0 311.0 45 SSB50CB00TT SSB60CB00TT TSB50CB TSB60CB 220 283 146.0 208.5 11. 22.5 36 SSB50CD00TT SSB60CD00TT 48 TSB50CD TSB60CD 85 110 1 126 108.0 150.0 All Socket Tee DN100 11. SSB50CE00TT SSB60CE00TT TSB50CE TSB60CE 220 345 71 94 Please enquire 136.0 96.0 Duckfoot All Socket Tee DN600 SSB50CF00TT SSB60TE0RTT SSB50CF00FF SSB60TE0RFF 800 0 280.0 292.0 DN200 3 355 Please enquire All Flange Socket on Tee Double Socket Tee* DN500 DN80 SSB60UD1ETT SSB50TE0QTT SSB60UD1EFF SSB50TE0QFF 680 3 3 455 204.0 3.0 Flange on Double Socket Tee* DN300 DN100 DN80 SSB50UD1ETT SSB60UV1FTT TSB50UD1E TSB60UV1F 455 370 3 230 Please 475 3 enquire 190.0 111.0 DN0 DN150 DN100 SSB50UV1FTT SSB60UD1JTT TSB50UD1F TSB60UD1J 570 380 230 3 Please 3 490 enquire 121.5 172.0 DN600 DN150 DN200 SSB60UV2KTT SSB50UD1JTT TSB60UD2K TSB50UD1J 3 3 500 430 196.5 143.0 30 800 0 322 DN300 DN200 SSB60UD2MTT SSB50UD2KTT TSB60UD2M TSB50UD2K 3 452 4 520 150.5 235.0 Flange on Double DN80** DN0 DN0 SSB60UD2NTT SSB50UD2LTT TSB60UD2N TSB50UD2L 3 455 443 570 450 58 173.0 279.0 Socket Tee DN100** DN300 DN600 SSB50UD2MTT SSB60UD2RTT TSB50UD2M TSB60UD2R 3 800 475 443 580 4609 2.5 180.5 Flange on Socket Level invert tee* DN150 DN0 DN150** SSB50UD2NTT SSB60UT1JTT SSB60UT1JFF TSB50UD2N 3 354 555 475 450 480 172 176.0 221.0 Concentric Taper DN0 DN500 SSB50UD2QTT SSB60VE0NTT TSB50UD2Q TSB60VE0N 460 675 500 155.0 280.5 DN300** Flange on Socket Level invert tee* DN450 DN150 SSB60VE0PTT SSB50UT1JTT SSB50UT1JFF TSB60VE0P 452 520 360 348 235 0 1.0 133.0 Concentric Taper DN0** DN500 DN350 SSB60VE0QTT SSB50VE0YTT TSB60VE0Q TSB50VE0Y 570 5 8 378 3 120.0 88.5 Flange & Socket Piece* DN0 SSB50VE0NTT SSB60BE20TT TSB50VE0N TSB60BE2 170 290 149.0 86.5 DN600** 800 580 378 Flange & Spigot Piece DN450 BBB60BU20TT SSB50VE0PTT BBB60BU20FF TSB50VE0P 560 0 159.0 80.0 End Flange on Socket Flange Cap& Socket Piece* Socket SSB50BE20TT 110085 TSB50BE2 - - 170 98.0 3.5 Level Invert Flange & Spigot Piece DN150 Spigot BBB50BU20TT 110086 BBB50BU20FF - 354-450 520 171 109.0 3.5 UNIVERSAL End Cap Socket 110107 - - 3.0 Tapers Concentric DN0 36 48 460 127 Bend Spigot 90 SFB60CA00TT 110108 - - 645 350.5 3.0 UNIVERSAL DN450 45 36 SFB60CB00TT 48-360 285 121 262.0 Bends DN500 22.5 90 36 SFB60CD00TT SFB50CA00TT 48-8 150 550 118 217.0 235.0 11. 45 SFB50CB00TT SFB60CE00TT - 2 85 194.0 176.0 Flange & Socket Piece** 190 1 Flange on Double Socket Tee* DN80 22.5 SFB60UD1ETT SFB50CD00TT - 3 130 475 229.5 148.0 Flange & Spigot Piece DN100 11. SFB60UD1FTT SFB50CE00TT - 560 3 75 480159 229.0 133.0 Flange Flange on Double joint sets Socket are Tee* available to order, DN150 DN80please SFB50UD1ETT SFB60UD1JTT contact your customer - service representative. 3 215 490 415 232.0 146.5 * Weights are to be used as a guide. DN200 DN100 SFB60UD2KTT SFB50UD1FTT - 3 215 500 420 236.5 147.5 DN0 DN150 SFB60UD2LTT SFB50UD1JTT - 570 330 510 430 246.0 6.0 DN300 DN200 SFB60UD2MTT SFB50UD2KTT - 570 330 520 4 288.0 9.5 DN0 DN0 SFB60UD2NTT SFB50UD2LTT - 570 450 5 450 307.0 190.0 DN600 DN300 SFB50UD2MTT SFB60UD2RTT - 800 450 580 470 4.5 197.5 Flange & Socket Piece* DN0 SFB50UD2NTT SFB60BE20TT - 180 565 480 1.0 231.5 DN500 SFB50UD2QTT - 680 500 267.5 Taper DN0 SFB50VE0NTT - 260 1.0 Flange Socket SFB50BE20TT - 170 88.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 46 38 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN600 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg) Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 700 bar 324 Bend 90 45 BBB60CA20TT BBB60CA20FF 426 700 264 431.0 45 BBB60CB20TT BBB60CB20FF 426 264.0 22.5 22.5 BBB60CD20TT BBB60CD20FF 426 426 267 267.0 11. 11. BBB60CE20TT BBB60CE20FF 426 426 268 268.0 90º Long Duckfoot Radius Bend BBB60CH20TT BBB60CH20FF 700 900 455 493 379.0 Duckfoot BBB60CF20TT BBB60CF20FF 700 455 569.0 All Flange Tee DN80 1100 450 349 All Flange Tee DN80 BBB60TE2ETT BBB60TE2EFF 1100 450 349.0 DN100 DN100 BBB60TE2FTT BBB60TE2FFF 1100 1100 450 450 350 350.0 DN150 DN150 BBB60TE2JTT BBB60TE2JFF 1100 1100 450 450 352 398.0 DN200 DN300 BBB60TE2KTT BBB60TE2KFF 1100 1100 550 450 369 8.0 DN0 BBB60TE2LTT BBB60TE2LFF 1100 450 358.0 DN450 DN300 BBB60TE2MTT BBB60TE2MFF 1100 550 1100 550 4 369.0 DN600 DN350 BBB60TE2YTT BBB60TE2YFF 1100 1100 550 550 447 385.0 All Flange Radial DN0 BBB60TE2NTT BBB60TE2NFF 00 1100 900 550 942 436.0 All Flange Level DN450 DN150 BBB60TE2PTT BBB60TE2PFF 1100 1100 450 550 386 4.0 DN500 BBB60TE2QTT BBB60TE2QFF 1100 550 9.0 Invert DN200 1100 450 396 DN600 193678 193679 1100 550 447.0 All Flange Tapers Radial Concentric DN300 BBB60TW2RTT BBB60TW2RFF 800 00 900 171 732.0 Level invert tee DN100 DN350 BBB60TT2FTT BBB60TT2FFF 700 1100 435 7 298.0 DN150 BBB60TT2JTT BBB60TT2JFF 1100 450 360.0 DN0 600 4 DN200 BBB60TT2KTT BBB60TT2KFF 1100 450 396.0 Cross DN450 BBB60XN2RTT BBB60XN2RFF 600 1100 550 175 523.0 45º Angle branch DN500 BBB60TU2RTT BBB60TU2RFF 600 1300 1100 190 550.0 Concentric Taper DN300 BBB60VE2MTT BBB60VE2MFF 800 171.0 Bellmouth 300 810 122 DN350 BBB60VE2YTT BBB60VE2YFF 700 7.0 Loose Puddle Flange DN0 BBB60VE2NTT BBB60VE2NFF 5 600 900 120 4.0 Blank Flange DN450 BBB60VE2PTT BBB60VE2PFF 600 1 230.0 DN500 BBB60VE2QTT BBB60VE2QFF Flange joint sets are available to order, please contact your customer service representative. 600 232.0 Flat Taper * Weights are to be used as DN300 a guide. BBB60VT2MTT BBB60VT2MFF 500 203.0 DN350 BBB60VT2YTT BBB60VT2YFF 500 245.0 DN0 BBB60VT2NTT BBB60VT2NFF 500 5.0 DN500 BBB60VT2QTT BBB60VT2QFF 500 268.0 Bellmouth BBB60BP20TT BBB60BP20FF 300 810 122.0 Loose Puddle Flange BBB60PF00TT BBB60PF00FF 5 900 120.0 Blank Flange BBB60QN20TT BBB60QN20FF 133.0 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 39 47

Section 2: Product Range DN700 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Pallet (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 34 46 (PFA) 670bar 455 RAPID 45 34-46 330 336 Bend 22.5 90 SSB70CA00TT 34 TSB70CA 46 30 175 670 271 584.0 45 SSB70CB00TT TSB70CB 30 336 319.0 11. 22.5 SSB70CD00TT 34 TSB70CD 46 95 30 158 235 239.0 Flange on Double DN150 11. SSB70CE00TT TSB70CE 30 87 204.0 Flange Socket on Double Tee Socket Tee (facing)** DN150* SSB70UD1JTT TSB70UD1J 365 365 520 Please 520 enquire269.0 DN0 DN200* SSB70UD2KTT TSB70UD2K 365 365 535 5 334 265.0 DN0* SSB70UV2LTT SSB70UV2LFF 365 535 271.0 DN0** DN0* SSB70UD2NTT TSB70UD2N 585 555 585 Please enquire 555 351.0 DN700DN600* SSB70UD2RTT TSB70UD2R 915 915 600 585 546 499.0 Flange on Socket DN700 SSB70TD2STT TSB70TD2S 915 600 546.0 Flange Level on Socket Invert Level invert tee* DN200 SSB70UT2KTT SSB70UT2KFF 585 500 346.0 DN200 585 500 300 Concentric Taper DN500 SSB70VE0QTT SSB70VE0QFF 30 480 198.0 Tapers Concentric DN500 DN600 SSB70VE0RTT 34 SSB70VE0RFF 46 480 30 268 215 176.0 Flange & Socket Piece DN600 SSB70BE20TT 34 TSB70BE2 46 268 190 196 6.0 Flange & Spigot Piece SEB70BU20TT SEB70BU20FF 600 187.0 Flange & Socket Piece** 190 202 End Cap Socket 110296 - - 3.5 Flange & Spigot Piece Spigot 110295-600 - 206 3.5 UNIVERSAL Flange joint sets are available to order, please contact your customer service representative. Bend* Weights are to be used as a guide. 45 SFB70CB00TT - 30 336 490.0 22.5 SFB70CD00TT - 30 158 0.0 11. SFB70CE00TT - 30 87 350.0 Flange on Double Socket Tee* DN150 SFB70UD1JTT - 365 520 3.0 DN200 SFB70UD2KTT - 365 5 428.0 DN0 SFB70UD2LTT - 365 535 455.5 DN300 SFB70UD2MTT - 585 530 510.0 DN0 SFB70UD2NTT - 585 555 570.0 Flange & Socket Piece SFB70BE20TT - 190 9.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 48 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN700 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 800 bar 423 Bend 90 45 BBB70CA20TT BBB70CA20FF 478 800 335 561.0 45 BBB70CB20TT BBB70CB20FF 478 338.0 22.5 22.5 BBB70CD20TT BBB70CD20FF 300 300 342 8.0 11. 11. BBB70CE20TT BBB70CE20FF 230 230 343 223.0 Duckfoot Duckfoot BBB70CF20TT BBB70CF20FF 800 800 520 520 586 746.0 All Flange Tee All Flange Tee DN150* DN150 BBB70UE2JTT BBB70UE2JFF 650 520 299.0 (facing)** DN200* BBB70UE2KTT BBB70UE2KFF 650 650 520 5 Please enquire 302.0 DN0* DN300 BBB70UV2LTT BBB70UV2LFF 780 650 530 535 342 309.0 DN300* BBB70UE2MTT BBB70UE2MFF 870 530 335.0 DN450 DN0* BBB70UE2NTT BBB70UE2NFF 920 870 560 555 1 388.0 DN700 DN600* BBB70UE2RTT BBB70UE2RFF 1200 1200 600 585 548 536.0 All Flange Level DN700 BBB70TE2STT BBB70TE2SFF 1200 600 510.0 Level Invert invert tee DN200 BBB70TT2KTT BBB70TT2KFF 870 500 239.0 DN200 650 500 268 45º Angle branch BBB70TU2STT BBB70TU2SFF 1500 1150 770.0 Tapers Concentric Concentric Taper DN0 DN0 194589 194590 800 600 220 220.0 DN450 DN450 BBB70VE2PTT BBB70VE2PFF 700 700 213 285.0 DN500 DN500 BBB70VE2QTT BBB70VE2QFF 600 600 208 266.0 DN600 DN600 BBB70VE2RTT BBB70VE2RFF 600 600 243 243.0 Flat Taper Loose Puddle Flange DN0 BBB70VT2NTT BBB70VT2NFF 5 600 1000 Please enquire 291.0 Blank Flange DN500 BBB70VT2QTT BBB70VT2QFF 600 3 330.0 Flange joint sets are available DN600 to order, please BBB70VT2RTT contact your customer BBB70VT2RFF service representative. 600 3.0 Bellmouth * Weights are to be used as a guide. BBB70BP20TT BBB70BP20FF 500 945 9.0 Blank Flange BBB70QN20TT BBB70QN20FF 6.0 * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83. - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 41 49

Section 2: Product Range DN800 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensions Per Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 32 43 (PFA) 735 bar 605 RAPID 45 32-43 370 434 Bend 22.5 90 SSB80CA00TT 32 TSB80CA 43 30 195 735 343 696.0 45 SSB80CB00TT TSB80CB 30 365 414.0 11. 22.5 32 SSB80CD00TT TSB80CD 43 110 30 171 295 303.0 Flange on Double DN150 11. SSB80CE00TT TSB80CE 30 91 3.5 Flange Socket on Double Tee Socket Tee (facing)** DN150* SSB80UD1JTT TSB80UD1J 355 580 355 Please 580 enquire 332.0 DN200 DN200* SSB80UD2KTT TSB80UD2K 355 585 355 585 336.0 Please enquire DN0* SSB80UD2LTT TSB80UD2L 355 585 349.0 DN0 DN0* SSB80UD2NTT TSB80UD2N 355 585 575 Please enquire 615 435.0 DN0 DN600* SSB80UD2RTT TSB80UD2R 575 1015 615 Please 645 enquire 642.0 DN800 DN600** SSB80TD2TTT TSB80TD2T 1045 1015 645 675 674.0 Please enquire Flange on Socket Level invert tee* DN200 SSB80UT2KTT SSB80UT2KFF 575 5 426.0 Concentric Taper DN800 DN600 SSB80VE0RTT TSB80VE0R 1015 30 675 468 724 5.0 Flange on Socket DN700 SSB80VE0STT TSB80VE0S 30 280 243.0 Flange Level & Socket Invert Piece DN200 SSB80BE20TT TSB80BE2 575 5 200 364 220.0 Flange & Spigot Piece SEB80BU20TT SEB80BU20FF 600 0.0 Tapers Concentric DN600 32 43 468 270 End Cap Socket 111067 - - 3.5 DN700 Spigot 32 111068 43-280- Please enquire 3.5 UNIVERSAL Flange & Socket Piece** 200 3 Bend 45 SFB80CB00TT - 30 364 700.0 Flange & Spigot Piece 600 4 22.5 SFB80CD00TT - 30 170 550.0 Flange joint sets are available to order, 11. please SFB80CE00TT contact your customer -service representative. 30 90 470.0 Flange * Weights on double are socket to be tee* used as a guide. DN200 SFB80UD2KTT - 355 585 530.0 DN600 SFB80UD2RTT - 1015 645 845.0 Flange & Socket Piece SFB80BE20TT - 200 385.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 50 42 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN800 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 900 bar 571 Bend 90 45 BBB80CA20TT BBB80CA20FF 529 900 444 778.0 45 BBB80CB20TT BBB80CB20FF 529 458.0 22.5 22.5 BBB80CD20TT BBB80CD20FF 335 335 448 336.0 11. 11. BBB80CE20TT BBB80CE20FF 5 5 451 286.0 Duckfoot Duckfoot BBB80CF20TT BBB80CF20FF 900 900 590 590 798 1003.0 All Flange Tee DN150* BBB80UE2JTT BBB80UE2JFF 690 580 392.0 All Flange Tee DN300 820 585 435 DN200* BBB80UE2KTT BBB80UE2KFF 690 585 396.0 DN450 DN0* BBB80UV2LTT BBB80UV2LFF 980 690 615 585 508 1.0 DN800 DN300* BBB80UE2MTT BBB80UE2MFF 1350 910 675 585 741 435.0 DN0* BBB80UE2NTT BBB80UE2NFF 910 615 495.0 All Flange Level DN450* BBB80UE2PTT BBB80UE2PFF 1350 615 508.0 Invert DN200 DN600* BBB80UE2RTT BBB80UE2RFF 690 1350 5 645 388 701.0 Tapers Concentric DN500 DN800 BBB80TE2TTT BBB80TE2TFF 800 1350 675 285 734.0 Level invert tee* DN200 DN600 BBB80UT2KTT BBB80UT2KFF 600 910 5 275 489.0 45º Angle branch BBB80TU2TTT BBB80TU2TFF 00 1300 1005.0 Concentric Taper DN700 DN500 BBB80VE2QTT BBB80VE2QFF 600 800 295 480.5 Loose Puddle Flange DN600 BBB80VE2RTT BBB80VE2RFF 185 600 1100 Please enquire 354.0 Blank Flange DN700 BBB80VE2STT BBB80VE2SFF 600 228 269.0 Flat Taper DN500 BBB80VT2QTT BBB80VT2QFF 600 285.0 Flange joint sets are available to order, please contact your customer service representative. DN600 BBB80VT2RTT BBB80VT2RFF 600 275.0 * Weights are to be used as a guide. DN700 BBB80VT2STT BBB80VT2SFF 600 295.0 Bellmouth BBB80BP20TT BBB80BP20FF 380 1055 203.0 Blank Flange BBB80QN20TT BBB80QN20FF 230.0 * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 43 51

Section 2: Product Range DN900 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 31 42 (PFA) 880bar 813 RAPID 45 31-42 415 583 Bend 22.5 90 SSB90CA00TT 31 TSB90CA 42 30 220 880 461 800.0 45 SSB90CB00TT TSB90CB 30 4 545.0 11. 22.5 SSB90CD00TT 31 TSB90CD 42 120 30 198 393 5.5 Flange on Double DN150 11. SSB90CE00TT TSB90CE 30 103 3.5 Flange Socket on Double Tee Socket Tee (facing)** DN200* SSB90UD2KTT SSB90UD2KFF 375 375 600 645 439 419.0 DN200 DN0* SSB90UD2NTT SSB90UD2NFF 375 595 645 675 536.0 Please enquire DN600* SSB90UD2RTT SSB90UD2RFF 1145 705 823.0 DN0 DN900 SSB90TD2UTT SSB90TD2UFF 375 6 1145 Please enquire 750 878.0 Flange on Socket Level invert tee* DN0 DN200 SSB90UT2KTT SSB90UT2KFF 595 595 675 Please 580 enquire542.0 Concentric Taper DN600** DN700 SSB90VE0STT SSB90VE0SFF 1145 30 480 705 883 338.0 DN800 DN900 SSB90VE0TTT SSB90VE0TFF 30 1145 280 750 975 307.0 Flange & Socket Piece SSB90BE20TT SSB90BE20FF 210 268.0 Flange on Socket Flange Level & Spigot Invert Piece SEB90BU20TT SEB90BU20FF 600 298.0 DN200 599 580 471 UNIVERSAL Bend Tapers Concentric DN700 45 SFB90CB00TT 31 42-480 30 415 384 9.0 DN800 22.5 SFB90CD00TT - 30 280 220 355 770.0 11. SFB90CE00TT - 30 120 696.0 Flange & Socket Piece** Flange on double socket tee* DN600 SFB90UD2RTT - 210 1145 327 705 1205.0 Flange Flange & Socket & Piece Spigot Piece SFB90BE20TT - 600 210 320 450.0 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 52 44 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN900 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 1000 bar 750 Bend 90 45 BBB90CA20TT BBB90CA20FF 581 1000 576 10.0 45 BBB90CB20TT BBB90CB20FF 581 587.0 22.5 22.5 BBB90CD20TT BBB90CD20FF 375 375 588 437.0 11. 11. BBB90CE20TT BBB90CE20FF 280 280 592 363.0 Duckfoot Duckfoot BBB90CF20TT BBB90CF20FF 1000 1000 645 645 1050 1751.0 All Flange Tee DN150* BBB90UE2JTT BBB90UE2JFF 730 600 480.0 All Flange Tee DN300 880 650 550 DN200* BBB90UE2KTT BBB90UE2KFF 730 645 483.0 DN450 DN0* BBB90UV2LTT BBB90UV2LFF 1030 730 680 6 630 482.0 DN900 DN300* BBB90UE2MTT BBB90UE2MFF 1500 950 750 660 974 550.0 DN0* BBB90UE2NTT BBB90UE2NFF 950 675 598.0 All Flange Level DN450* BBB90UE2PTT BBB90UE2PFF 1500 680 630.0 Invert DN200 DN600* BBB90UE2RTT BBB90UE2RFF 730 1500 580 705 483 885.0 Tapers Concentric DN700 DN900 BBB90TE2UTT BBB90TE2UFF 600 1500 750 333 9.0 Level invert tee* DN800 DN200 BBB90UT2KTT BBB90UT2KFF 600 950 580 364 483.0 Concentric Taper DN700 BBB90VE2STT BBB90VE2SFF 600 414.0 Loose Puddle Flange 185 1200 221 DN800 BBB90VE2TTT BBB90VE2TFF 600 359.0 Bellmouth Blank Flange BBB90BP20TT BBB90BP20FF 390 15 299 239.0 Blank Flangejoint sets are available to order, please BBB90QN20TT contact your customer BBB90QN20FF service representative. 300.0 * Weights are to be used as a guide. * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 45 53

Section 2: Product Range DN1000 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 30 41 (PFA) 1005bar 1045 RAPID 45 30-41 460 741 Bend 22.5 90 SSC10CA00TT 30 TSC10CA 41 30 2 1000 764 1461.0 45 SSC10CB00TT TSC10CB 30 4 703.5 11. 22.5 SSC10CD00TT 30 TSC10CD 41 130 218 489 507.5 Flange on Double DN150 11. SSC10CE00TT TSC10CE 30 118 414.5 Flange Socket on Double Tee Socket Tee (facing)** DN150* SSC10UD1JTT SSC10UD1JFF 379 379 705 705 534 447.0 DN300 DN200* SSC10UD2KTT SSC10UD2KFF 599 379 720 705 626 510.0 DN0* SSC10UV2LTT SSC10UV2LFF 379 705 519.0 DN0 DN300* SSC10UD2MTT SSC10UD2MFF 599 735 599 724 720 569.0 DN600** DN0* SSC10UD2NTT SSC10UD2NFF 1290 599 765 7351056 644.0 DN600* DN1000 SSC10UD2RTT SSC10UD2RFF 19 18 830 765 17 1032.0 DN800 SSC10TD2TTT SSC10TD2TFF 18 795 1082.0 Flange on Socket DN1000 SSC10TD2VTT SSC10TD2VFF 18 830 1137.0 Level Invert Flange on Socket Level invert tee* DN200 DN200 SSC10UT2KTT SSC10UT2KFF 599 599 630 630 569 520.0 Concentric Tapers Taper Concentric DN800 DN800 SSC10VE0TTT 30 SSC10VE0TFF 41 480 30 480 468 417.0 DN900 DN900 SSC10VE0UTT 30 SSC10VE0UFF 41 280 30 280 446 378.0 Flange & Socket Piece Flange & Socket Piece** SSC10BE20TT SSC10BE20FF 220 220 415 359.0 Flange & Spigot Piece Flange & Spigot Piece SEC10BU20TT SEC10BU20FF 600 600 395 376.0 UNIVERSAL Bend Flange joint sets are available to order, 45 please SFC10CB00TT contact your customer - service representative. 30 460 1085.0 * Weights are to be used as a guide. 22.5 SFC10CD00TT - 30 2 899.0 11. SFC10CE00TT - 30 130 800.0 Flange on double socket tee* DN600 SFC10UD2RTT - 1265 765 14.0 Flange & Socket Piece SFC10BE20TT - 220 550.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables - Codes starting with T are gasket inclusive 54 46 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN1000 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 (PFA) 1100 bar 999 Bend 90 45 BBC10CA20TT BBC10CA20FF 632 1100 757 1348.0 45 BBC10CB20TT BBC10CB20FF 632 771.0 22.5 22.5 BBC10CD20TT BBC10CD20FF 410 410 773 581.0 11. 11. BBC10CE20TT BBC10CE20FF 310 310 778 482.0 Duckfoot Duckfoot BBC10CF20TT BBC10CF20FF 1100 1100 710 710 1380 2303.0 All Flange Tee DN150* BBC10UE2JTT BBC10UE2JFF 770 705 631.0 All Flange Tee DN200 770 705 690 DN200* BBC10UE2KTT BBC10UE2KFF 770 705 633.0 DN300** DN0* BBC10UV2LTT BBC10UV2LFF 990 770 720 705 703 695.0 DN0 DN300* BBC10UE2MTT BBC10UE2MFF 990 990 720 720 760 754.0 DN0* DN450 BBC10UE2NTT BBC10UE2NFF 1080 990 745 735 798 767.0 DN600* BBC10UE2RTT BBC10UE2RFF 50 765 1155.0 DN1000 DN1000 BBC10TE2VTT BBC10TE2VFF 50 50 8 830 1289 1260.0 Level All invert Flange tee* Level DN200 BBC10UT2KTT BBC10UT2KFF 990 630 627.0 Concentric Invert Taper DN200 DN800 BBC10VE2TTT BBC10VE2TFF 770 600 630 627 520.0 DN900 BBC10VE2UTT BBC10VE2UFF 600 447.0 Tapers Concentric DN800 600 418 Bellmouth BBC10BP20TT BBC10BP20FF 390 1200 360.0 Blank Flange DN900 BBC10QN20TT BBC10QN20FF 600 454 0.0 Loose Puddle Flange 200 342 * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83 Blank Flange 5 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 47 55

Section 2: Product Range DN1200 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 90 29 39 (PFA) 1220bar 63 RAPID 45 29-39 550 1171 Bend 22.5 45 SSC12CB00TT 29 SSC12CB00FF 39 30 285 538 904 1015.0 22.5 SSC12CD00TT SSC12CD00FF 30 9 644.0 11. 11. SSC12CE00TT 29 SSC12CE00FF 39 150 30 138 757 478.0 Flange Flange on Double on Double Socket Tee DN200DN200* SSC12UD2KTT 29 SSC12UD2KFF 823 855 880 880 795 949.0 Socket Tee DN300* SSC12UD2MTT SSC12UD2MFF 855 838 927.0 DN300 29 823 838 9 DN0* SSC12UD2NTT SSC12UD2NFF 855 835 943.0 DN0DN600* SSC12UD2RTT 29 SSC12UD2RFF 823 855 835 8851018 977.0 DN600** DN800 SSC12TD2TTT 29 SSC12TD2TFF 823 1245 885 9151190 1353.0 DN900 SSC12TD2UTT SSC12TD2UFF 1245 930 1397.0 DN900 29 1245 930 1573 DN1000 SSC12TD2VTT SSC12TD2VFF 1245 920 1380.0 DN1200 DN1200 SSC12TD2BTT 29 SSC12TD2BFF 1480 1480 950 9501958 1732.0 Flange on Socket Level invert tee* Flange on Socket DN200 SSC12UT2KTT SSC12UT2KFF 855 700 1084.0 Concentric Level Taper Invert DN1000 DN200 SSC12VE0VTT 29 SSC12VE0VFF 30 480 8 543.0 Flange & Socket Piece SSC12BE20TT SSC12BE20FF 2 484.0 Tapers Concentric DN1000 29 39 480 708 Flange & Spigot Piece SEC12BU20TT SEC12BU20FF 600 526.0 Flange & Socket Piece** UNIVERSAL 29 2 635 Bend Flange & Spigot Piece 45 SFC12CB00TT 29 600 30 550 567 1487.0 22.5 SFC12CD00TT 30 285 11.0 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. 11. SFC12CE00TT 30 150 950.0 Flange on double socket tee* DN200 SFC12UD2KTT 823 880 1421.0 DN0 SFC12UV2LTT 823 873 1423.0 DN300 SFC12UD2MTT 823 838 1428.0 DN0 SFC12UD2NTT 823 835 1457.0 DN600 SFC12UD2RTT 8 885 1510.0 Flange & Socket Piece SFC12BE20TT 2 720.0 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid, Universal and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables 56 48 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN1200 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 90 29 (PFA) 1355 bar 1573 Bend 90 45 BBC12CA20TT 29 BBC12CA20FF 750 1355 1187 26.0 45 BBC12CB20TT BBC12CB20FF 746 1205.0 22.5 22.5 29 BBC12CD20TT BBC12CD20FF 467 468 1213 1018.0 11. 11. BBC12CE20TT 29 BBC12CE20FF 346 346 1220 858.0 Duckfoot All Flange Tee DN300** BBB12CF20TT 29 BBB12CF20FF 12 1355 838 8 1009 4150.0 All Flange Tee DN200* BBC12UE2KTT BBC12UE2KFF 1245 880 19.0 DN200 DN300* 29 BBC12UE2MTT BBC12UE2MFF 12 880 1245 838 9 1269.0 DN0 DN0* BBC12UE2NTT 29 BBC12UE2NFF 12 1245 835 835 1101 1263.0 DN600* DN600** BBC12UE2RTT 29 BBC12UE2RFF 10 1245 885 885 19 1304.0 DN1000 BBC12TE2VTT BBC12TE2VFF 65 920 86.0 DN1200 DN1200 29 BBC12TE2BTT BBC12TE2BFF 1900 950 1900 950 2055 1979.0 Level All invert Flange tee Level DN200 BBC12TT2KTT BBC12TT2KFF 1245 700 1277.0 Concentric Invert Taper DN200 DN600 BBC12VE2RTT 29 BBC12VE2RFF 850 1490 700 945 980.0 Tapers Concentric DN1000 DN600 BBC12VE2VTT 29 BBC12VE2VFF 1490 860 745 717.0 Bellmouth BBC12BP20TT BBC12BP20FF 470 1523 520.0 Blank Flange DN1000 BBC12QN20TT 29 BBC12QN20FF 860 720 662.0 Loose Puddle Flange 29 2 1570 487 * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83 Blank Flange 29 653 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 49 57

Section 2: Product Range DN10 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 45 28 38 (PFA) 522bar 1500 RAPID 22.5 28-38 264 1215 Bend 11. 45 SSC14CB00TT 28 SSC14CB00FF 38 30 143 522 1029 1555.0 22.5 SSC14CD00TT SSC14CD00FF 30 264 1107.0 Flange on Double DN300 11. SSC14CE00TT SSC14CE00FF 30 143 1338 884.0 Socket Tee Flange on Double Socket Tee DN0DN600* SSC14UD2RTT SSC14UD2RFF 1010 1010 960 98010 1567.0 DN10 DN600** SSC14TD2CTT SSC14TD2CFF 1010 1950 980 1100 1787 2612.0 Concentric Taper DN1200 SSC14VE0BTT SSC14VE0BFF 30 360 714.0 Flange & Socket Piece DN1200 SSC14BE20TT SSC14BE20FF 1700 1000 310 2350 768.0 Flange & Spigot Piece DN10 SSC14BU20TT SSC14BU20FF 1950 1100 710 2880 726.0 Tapers Concentric DN1000 28 38 665 910 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 DN1200 28 38 360 938 - For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Flange & Socket Piece** 310 898 Flange & Spigot Piece 710 818 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. 58 50 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN10 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 45 (PFA) 782 bar 1599 Bend 45 22.5 BBC14CB20TT BBC14CB20FF 524 782 35 1772.0 22.5 BBC14CD20TT BBC14CD20FF 524 1324.0 11. 11. BBC14CE20TT BBC14CE20FF 3 3 43 1100.0 All Flange All Flange Tee Tee DN0 DN1000 BBC14TE2VTT BBC14TE2VFF 1530 2470 960 10 1519 2612.0 DN600** DN10 BBC14TE2CTT BBC14TE2CFF 1530 2470 980 1100 92 2833.0 Concentric Taper DN1200 DN900 BBC14VE2BTT BBC14VE2BFF 2470 760 1010 1992 955.0 Bellmouth DN10 BBC14BP20TT BBC14BP20FF 2470 585 1100 1735 2730 700.0 Blank Flange BBC14QN20TT BBC14QN20FF 993.0 Tapers Concentric DN1200 760 1070 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Loose Puddle Flange 2 1780 634 Blank Flange 993 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 51 59

Section 2: Product Range DN00 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 45 27 37 (PFA) 563bar 20 RAPID 22.5 27-37 284 29 Bend 11. 45 SSCCB00TT 27 SSCCB00FF 37 153 563 1377 2089.0 22.5 SSCCD00TT SSCCD00FF 284 1479.0 Flange on Double DN300** 11. SSCCE00TT SSCCE00FF 1050 1050 153 1744 1173.0 Socket Tee Flange on Double Socket Tee DN0DN300* SSCUD2MTT SSCUD2MFF 1050 1050 1100 10501800 1967.0 DN1000 SSCTD2VTT SSCTD2VFF 1505 1150 2458.0 DN600** 1050 1090 2304 DN00 SSCTD2ETT SSCTD2EFF 2170 12 3859.0 Concentric Taper DN00DN1200 SSCVE0BTT SSCVE0BFF 2170 12 645 2604 1065.0 Tapers Concentric DN10 DN10 SSCVE0CTT 27 SSCVE0CFF 37 350 350 1228 1009.0 DN1500 DN1500 SSCVE0DTT 27 SSCVE0DFF 37 0 0 12 1190.0 Flange & Socket Piece Flange & Socket Piece** SSCBE20TT SSCBE20FF 330 330 1218 1046.0 Flange & Spigot Piece SSCBU20TT SSCBU20FF 780 1019.0 Flange & Spigot Piece 780 1143 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. - For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables 60 52 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN00 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 45 (PFA) 845 bar 2273 Bend 45 22.5 BBCCB20TT BBCCB20FF 564 843 23 2446.0 22.5 BBCCD20TT BBCCD20FF 564 1836.0 11. 11. BBCCE20TT BBCCE20FF 433 433 2338 1530.0 All Flange All Flange Tee Tee DN300** BBCUE2MTT BBCUE2MFF 10 1050 1050 1861 2317.0 DN1000 DN0 BBCTE2VTT BBCTE2VFF 10 2065 1100 1150 3230.0 Please enquire DN00 BBCTE2ETT BBCTE2EFF 2730 12 3921.0 Concentric Taper DN600** DN1200 BBCVE2BTT BBCVE2BFF 10 1090 1085 22 1245.0 DN800 DN10 BBCVE2CTT BBCVE2CFF 2065 890 1120 Please enquire13.0 DN1500 DN900 BBCVE2DTT BBCVE2DFF 1750 890 10 2603 1344.0 Blank Flange BBCQN20TT BBCQN20FF 1462.0 DN1000 2730 12 Please enquire * Product offered with PN adjustable flanges. For information on joint sets please refer to page 83 DN00 2730 12 3578 - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Tapers Concentric DN1200 1085 15 DN10 890 1338 Loose Puddle Flange 2 1996 702 Blank Flange 1462 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 53 61

Section 2: Product Range DN1800 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 45 27 37 (PFA) 642bar RAPID 22.5 27-37 337 Bend 11. 45 SSC18CB00TT 27 SSC18CB00FF 37 200 642 3126.0 22.5 SSC18CD00TT SSC18CD00FF 337 2070.0 Flange on Double DN0** 11. SSC18CE00TT SSC18CE00FF 1300 1300 200 1542.0 Flange Socket on Double Tee Socket Tee DN600** DN0* SSC18UV2NTT SSC18UV2NFF 1300 11 1200 1300 2345.0 DN600* SSC18UV2RTT SSC18UV2RFF 11 1200 Please 2385.0 DN800 1535 1230 DN800 SSC18TD2TTT SSC18TD2TFF 1360 1230 enquire 2800.0 DN900DN1800 SSC18TD2FTT SSC18TD2FFF 1535 2485 1245 1380 5850.0 Concentric Taper DN1800DN00 SSC18VE0ETT SSC18VE0EFF 2660 1430 427 1267.0 Flange & Socket Piece SSC18BE20TT SSC18BE20FF 387 1330.0 Tapers Concentric DN00 27 37 427 Flange & Spigot Piece SSC18BU20TT SSC18BU20FF 845 1359.0 Flange & Socket Piece** 387 * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 Flange & Spigot Piece 850 - For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. 62 54 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN1800 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 45 (PFA) 910 bar Bend 45 22.5 BBC18CB20TT BBC18CB20FF 600 905 37.0 22.5 BBC18CD20TT BBC18CD20FF 600 2675.0 11. 11. BBC18CE20TT BBC18CE20FF 463 463 21.0 All Flange All Flange Tee Tee DN300** DN900 BBC18TE2UTT BBC18TE2UFF 50 1885 1155 1245 3350.0 DN1800 DN0** BBC18TE2FTT BBC18TE2FFF 50 3006 1300 1380 6300.0 Concentric Taper DN1200 BBC18VE2BTT BBC18VE2BFF 1445 1960.0 Blank Flange DN600** BBC18QN20TT BBC18QN20FF 50 1200 Please 20.0 DN10 3050 1320 enquire - For information on fixed flange joint sets please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables DN1800 3050 1380 Tapers Concentric DN1200 1445 DN10 10 DN1500 10 DN00 970 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 55 63

Section 2: Product Range DN2000 Push-fit (Rapid) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product Test code Pressure Allowable Key dimensionsper Weight (PFA) bar (PEA) bar Operating Description L mm H mm Unit (kg)* Per Unit Water Sewer Pressure L mm H mm (Kg) Bends 45 27 37 (PFA) 685bar RAPID 22.5 27-37 355 Bend 11. 45 SSC20CB00TT 27 SSC20CB00FF 37 200 685 3702.0 22.5 SSC20CD00TT SSC20CD00FF 355 2668.0 Flange on Double DN600** 11. SSC20CE00TT SSC20CE00FF 1115 1310 200 2151.0 Flange Socket on Double Tee Socket Tee Please DN1000DN600* SSC20UV2RTT SSC20UV2RFF 1580 1110 1370 1315 3320.0 enquire DN1000 SSC20TD2VTT SSC20TD2VFF 1580 1370 4480.0 DN10 2045 1430 DN10 SSC20TD2CTT SSC20TD2CFF 2045 1430 5750.0 Concentric Tapers Taper Concentric DN1800 DN1800 SSC20VE0FTT 27 SSC20VE0FFF 37 472 472 1780.0 Flange Flange & Socket & Piece Socket Piece** SSC20BE20TT SSC20BE20FF 395 395 1789.0 Flange Flange & Spigot & Piece Spigot Piece SSC20BU20TT SSC20BU20FF 885 885 1749.0 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. * Product offered with PN adjustable flange. For information on joint sets please refer to page 83 - For information on gaskets and joint sets (Rapid and flange) please refer to Section 3: Joints on page 67. Please note that our fixed flange joint sets are CESWI 7th edition compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables 64 56 ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03.

DN2000 Flanged (PN Flanges) Allowable Allowable Key Dimensions Weight Description Operating Pressure Product code Test Pressure Allowable Key dimensions Per (PFA) bar (PEA) bar Operating L mm H mm Unit (kg)* Weight Per Description Water Sewer Pressure L mm H mm Unit (Kg) Bends 45 (PFA) 980 bar Bend 45 22.5 BBC20CB20TT BBC20CB20FF 650 980 3490.0 22.5 BBC20CD20TT BBC20CD20FF 650 2978.0 11. 11. BBC20CE20TT BBC20CE20FF 496 495 2461.0 All Flange All Flange Tee Tee DN300** DN1000 BBC20TE2VTT BBC20TE2VFF 1700 2170 1265 1370 5000.0 DN10 DN500** BBC20TE2CTT BBC20TE2CFF 1700 2635 1295 1430 6200.0 Concentric Taper DN1200 BBC20VE2BTT BBC20VE2BFF 18 2735.0 DN600** DN10 BBC20VE2CTT BBC20VE2CFF 1700 1315 30 2770.0 DN1000 DN00 BBC20VE2ETT BBC20VE2EFF 2170 1350 1370 Please enquire 2660.0 DN1800 DN10 BBC20VE2FTT BBC20VE2FFF 2635 1030 1430 2285.0 Blank Flange BBC20QN20TT BBC20QN20FF 2660.0 Tapers Concentric DN1200 18 - For information on fixed flange joint sets DN10 please see page 81. Please note that our fixed flange joint sets are CESWI 7th edition 30compliant - Weights are provided for estimation purposes only and actual values may vary from those provided in these tables DN1500 30 DN00 1350 DN1800 1030 Flange joint sets are available to order, please contact your customer service representative. * Weights are to be used as a guide. ** Adjustable flanges, for bolt lengths refer to adjustable flange datasheet ref: PAMRF03. 57 65

Section 2: Product Range Valves and Accessories Saint-Gobain PAM UK offers a comprehensive range of valves and accessories for the water and sewerage industry. Our valves range includes: l Gate valves, resilient and and metal faced DN50-300 l Non DN50-300 return valves DN80-300 l Flap Non valves return DN80-600 valves DN80-300 l Air Tidal valves flap valves DN80-600 l Fire Air Hydrants valves l Buttefly valves Hydrants Buttefly valves Couplings and Adaptors Our range of adaptors and couplings offer sustainable solutions to pipeline connections. They are available as standard products or as part of specifically engineered packages to suit customer requirements. Our range includes: l Wide tolerance couplings and and flange adaptors (50-300mm) l Dedicated couplings and flange adaptors (350-1200mm) (350-10mm) l Dismantling Repair clamps joints (48-750mm) (50-1200mm) l Flexlock Dismantling couplings joints and (350-1200mm) flange adaptors l Repair clamps 66 58

Section 3 Joints Joints 59 59 67

Section 3: Joints 68 60 Jointing Systems Saint-Gobain PAM UK s pipes and fittings are available with a range of jointing jointng systems to suit a range of applications or installation needs. Cost effective alternatives to the use of thrust blocks are available using either Rapid anchor gaskets, Rapid mechanical or the Universal joint. Table 6: Pressure capabilities overview Table 4: Overview Joint offer Non-anchored Anchored Joint offer Blutop Rapid Diameter Band Blutop Universal Universal Rapid Vi Unanchored Anchored Gaskets Vi Rapid Vi Rapid Ve Rapid Mechanical Ve Anchored PAMLOCK OD Water Water Sewer Water UTI Water DN600 Sewer WaterRapid Sewer Water Rapid Sewer Anchor Water Rapid Sewer Mechanical Water Sewer 75 - - - - DN700-1200 - - Rapid - - N/A - - - Rapid Mechanical - 90 - - - - - - - - - - - - 110 - - DN10-2000 - - - Rapid - - N/A - - PAMLOCK - - - 1 - - - - - - - - - - - - 0 - - Table 5: -Pressure-capabilities - - - - - - - - DN Water Water Sewer Water Water Sewer Water Sewer Water Sewer Water Sewer Water Sewer Joint offer 80 - - 22 60 60 - - - - - - Diameter Band 100 - - Unanchored 56 56 Anchored 64 64 Gaskets** - Mechanical - Anchored** - - 150 - - 48 48 60 60-50 - - UTI DN150 64-62* - 64-55 200 - - 43 43 52 52-44 - - 0-38 - DN200-0 12 3950 - * 39 46 23-46 20-3944 - 30 - - 300-35 - 12 DN450-600 34 34-36 41 41 27-18 - 37 30-27 - - 350-30 32-12 38 38 27 27 - - 0-30 30 - DN700-800 12 20 34-3220 35 N/A 35 - - - 450-30 29-13 11 DN900-1200 31-28 32 32 N/A 23 23 - - 500 - * 30 Class 28 Pipe - 11 9 30 30 22 22 - - 600-30 DN10-2000 28-26 N/A - ** K9 26 Pipe - 10 8 30 30 20 20 - - 700-30/ 29 - - - - - 27 27 - - 800-1000 - 30/ 28-26 - - - - - - - - Rapid Joint 1200-29 - - - - - - - - 10-2000 - 28-26 - The Rapid - joint is - the standard - joint - for both - potable -water and - sewerage - application -* for all sizes from DN80-2000. The introduction of internally and externally harmonised sockets for all Saint-Gobain PAM UK pipes and fittings offers substantial -* benefits to customers in the UK and world-wide. Harmonisation of sockets means that Blutop Joint just one (non-anchored) joint can be used for both potable water and sewer products, with easy identification of gaskets to ensure correct installation. The Rapid joint is a proven system and has been used successfully and extensively throughout Europe and the rest The Blutop of the World Joint is for a push-fit 50 years. joint to be used with Saint-Gobain PAM UK s Blutop range of products. Suitable for drinking water networks for sizes DN/OD75-0. It has been designed to last more than 100 years. * Except DN2000. Please enquire How it works: The Blutop seal Joints is achieved are compatible by the compression with PVC pipe of the conforming main body to EN of the 1452 elastomeric or with HDPE gasket. pipe As conforming the pressure to EN in 12201, the main i.e PVC increases, and HDPE the fish-tail spigots conforming design of the to gasket the mentioned ensures that standards the can seal be inserted tightens into proportionally Blutop pipe. to Please the pressure. note that Blutop pipe spigots must not be fitted into sockets designed for other joints (plastic, or other cast iron parts). Benefits: How Quick does to install it and work? dismantle Capable of angular deflection and longitudinal withdrawal with no loss of The seal is achieved by the compression of the main body of the elastomeric gasket. As performance the pressure in the main increases, the concave design of the gasket ensures that the seal Provides opportunity to reduce the number of fittings tightens proportionally to the pressure. Flexible joint to cope with ground movement Easy identification of gaskets for water or sewerage One joint whatever the application

Section 3: Joints Jointing Rapid Joint * Class Pipe ** K9 Pipe Rapid Systems Specification Saint-Gobain PAM UK pipes and fittings are available with a range of jointing systems Tables 6 & 7 give additional information regarding the joint specification and to Benefits: suit a range of applications or installation needs. Cost effective alternatives to the dimensions. l use Ease of thrust of laying blocks are available using either Rapid anchor gaskets, Rapid mechanical l Quick push fit joint with low insertion forces or the Universal joint. Table l 6: Fittings Water pipe: designed (EPDM with gasket) handles for easy of insertion l Angular deflection of up to 6 degrees Table l 4: Capable Overviewof angular deflection and longitudinal withdrawal with no loss of Pressure Rating (bar) performance Joint offer l Pipe Length DN Enables long Pipe bends Class without Allowable the use of Allowable fittings Diameter Band Allowable l Additional safety Unanchored against Operating the hazards Anchored Test of earth Pressure and Gaskets trench Deflection Mechanical movementsanchored (mm) Pressure (PFA) (PEA) (Degree) UTI DN600 Rapid Rapid Anchor Rapid Mechanical 60 Class 64 82 5 6000 Table DN700-1200 7: Blutop pipe, non-anchored Rapid gasket N/A Rapid Mechanical 80 Class 64 82 5 5500 DN10-2000 Rapid N/A Allowable PAMLOCK Allowable 100 DN/OD Class Pipe Class 64 82Operating 5 5500 Deflection (Degree) Pressure (PFA) Table 1 5: Pressure capabilities Class 64 82 5 6000 75 C 6 150 Class 62 Joint 79 offer 5 5500 Diameter 90 Band C 6 200 110 Class Unanchored C 50 Anchored 65Gaskets** Mechanical 5 Anchored** 5500 6 UTI 0DN150 1 Class 64-62* C 43 56-5 64-55500 6 Joint DN200-0 300 0 Class 50 - * C 23 53-20 5 44-30 5500 6 DN450-600 350 Class - 36 27 53-18 4 30-27 5500 Note.- Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculate for the above pipes by using the following formulas: DN700-800 0 Class 34-32 53 N/A 4-5500 PMA = PFA x 1.2 PEA = PMA + 5 bar DN900-1200 450 K9 31-28 53 N/A 4 5500 DN10-2000 500 K9 28-26 38 51 N/A 4-5500 600 K9 36 48 4 5500 700 K9 34 46 4 5500 800 K9 32 43 4 5500 The Rapid 900 joint is the standard K9 joint for 31for both potable water 42 and and sewerage application 4 7000 for all sizes from DN80-2000. The The introduction of of internally internally and and externally externally harmonised 1000 sockets for K9 all Saint-Gobain 30 PAM UK s pipes 41 and fittings 4 offers substantial 7000 benefits to 1100 customers in K9 the UK and world-wide. 29 Harmonisation of 4 of sockets means that 8190 that just one joint can be used for both potable water and sewer products, with easy identification 1200 of gaskets K9 to ensure correct 28 installation. 39 The The Rapid joint 4 is is a a proven 8180 system and has been used successfully and extensively throughout Europe and the 10 K9 28 38 3 8170 rest of the World for over 50 years. 50 years. 1500 K9 27 37 3 80 How it works: 00 K9 27 37 3 80 The seal is achieved by the compression of the main body of the elastomeric gasket. 1800 K9 26 36 2.5 81 As the internal pressure pressure in the main increases, increases, the fish-tail the fish-tail design design of the of gasket the gasket ensures ensures that the that the seal seal tightens 2000 tightens proportionally K9 to the to pressure. the 26 pressure. 36 2 8130 60 Benefits: Note: Quick Pipe to length install and weight dismantle may vary from the detail provided in these tables. Allowable Capable negative of angular internal deflection pressure and longitudinal DN60-2000 is withdrawal -1 bar, allowable with no external loss of pressure is +3 performance bar. Provides opportunity to reduce the number of fittings Flexible joint to cope with ground movement Easy identification of gaskets for water or sewerage One joint whatever the application 61 69

Rapid Joint Specification Tables 8 & 9 give additional information regarding the joint specification and dimensions. Tables 8: 6 & Water 7 give pipe additional (EPDM gasket) information regarding the joint specification and dimensions. Allowable Allowable Rapid Gasket DN Pipe Class Operating Deflection Water (EPDM) Table 6: Water pipe: (EPDM gasket) Pressure (PFA) (Degree) Prod Code 80 C 5 1855 Pressure Rating (bar) 100 C 5 1856 Pipe Length DN Pipe Class Allowable Allowable Allowable 150 C 5 Operating Test Pressure Deflection (mm) 1857 200 CPressure (PFA) (PEA) (Degree) 5 1858 600 Class C 64 82 5 6000 1859 300 80 C Class 64 82 5 185410 5500 350 100 C30 Class 64 30 82 4 5 185411 5500 0 C30 30 4 185412 1 Class 64 82 5 6000 450 C30 30 4 185413 150 500 Class C30 62 30 79 5 4 5500 185414 200600 Class C30 50 30 65 54 5500 185415 0700 Class C*/C30 43 /3056 54 5500 JSB70BA 300800 Class C*/C30 /3053 54 5500 JSB80BA 900 350 C/C30* Class /30 53 4 JSB90BA 5500 1000 0 C/C30* Class /30 53 4 4 JSC10BA 5500 1200 C 4 JSC12BA 450 K9 53 4 5500 10 C 3 JSC14BA 500 00 K9 C 38 51 4 3 5500 JSCBA 600 1800 K9 C 36 48 2.5 4 5500 JSC18BA 700 2000 K9 C 34 46 42 5500 JSC20BA *Preferred option 800 K9 32 43 4 5500 - For information on product codes, weights and lengths for water pipe please refer to table 1 & 2 on page 15 - Allowable 900negative internal K9 pressure DN80-DN2000 31 is -0.9 bar, allowable 42external pressure is 4+5 bar 7000 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas: PMA 1000 = PFA x 1.2 K9 30 41 4 7000 PEA = PMA + 5 bar 1100 K9 29 4 8190 1200 K9 28 39 4 8180 10 K9 28 38 3 8170 1500 K9 27 37 3 80 00 K9 27 37 3 80 1800 K9 26 36 2.5 81 2000 K9 26 36 2 8130 Note: Pipe length and weight may vary from the detail provided in these tables. Allowable negative internal pressure DN60-2000 is -1 bar, allowable external pressure is +3 bar. 70 61

Section 3: Joints Table Table 7: 9: Sewer Sewer Pipe: Pipe (Nitrile (Nitrile gasket) gasket) Rapid Gasket Allowable Operating Allowable Deflection DN Pressure Rating (bar) Sewer (Nitrile) Prod Pressure (PFA) (Degree) Pipe Length Code DN Allowable Allowable Allowable 80 5 Operating Test Pressure Deflection (mm) JSA80BB 100 Pressure (PFA) (PEA) (Degree) 5 JSB10BB 80 150 64 82 5 5 5500 JSB15BB 200 100 64 82 5 5 JSB20BB 5500 0 38 5 JSBBB 1 300 64 35 82 5 5 6000 JSB30BB 150350 59 32 76 4 5 5500 JSB35BB 2000 45 30 59 4 5 5500 JSBBB 450 0 38 29 51 4 5 JSB45BB 5500 500 28 4 JSB50BB 300 600 35 26 47 4 5 5500 JSB60BB 350700 32 29 43 4 4 5500 JSB70BB 0800 30 28 41 4 4 5500 JSB80BB 900 450 29 27 4 4 JSB90BB 5500 1000 26 4 JSC10BB 500 1200 28 29 38 4 4 5500 JSC12BB 60010 26 28 36 3 4 5500 JSC14BB 700 00 29 27 3 4 5500 JSCBB 1800 27 2.5 JSC18BB 800 28 38 4 5500 2000 26 2 JSC20BB 900 27 37 4 7000 - For information on product codes, weights and lengths for sewer pipe please refer to table 3 on page 1000 26 36 4 - Allowable negative internal pressure DN80-DN2000 is -0.9 bar, allowable external pressure is +5 bar 7000 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the 1100 following formulas: PMA = PFA x 1.2 29 4 8190 PEA = PMA + 5 bar 1200 28 39 4 8180 10 28 38 3 8170 1500 27 37 3 80 00 27 37 3 80 1800 26 36 2.5 81 2000 26 36 2 8130 Note: Pipe length and weight may vary from the detail provided in these tables. Allowable negative internal pressure DN80-2000 is -1 bar, allowable external pressure is +3 bar. 62 71

DN10-2000 Rapid N/A PAMLOCK Table 5: Pressure capabilities Diameter Band Anchored Solutions Joint offer Why Why do pipelines do pipelines need need anchoring? Unanchored Anchored Gaskets** Mechanical Anchored** UTI DN150 64-62* - 64-55 DN200-0 50 - * 23-20 44-30 Pressure Pressure pipelines DN450-600 pipelines are subject are subject to forces to - 36 forces at changes at changes of direction, 27 of - 18 direction, blank ends, blank valves, ends, 30 - valves, 27 tapers tapers etc. Atetc. these At points these points restraint restraint is required is required to avoid to joint avoid separation. joint separation. DN700-800 34-32 N/A - Saint-Gobain Saint-Gobain DN900-1200 PAM UK PAM offers UK offers a wide 31 a range wide - 28 range of costof effective cost effective N/A self anchoring self anchoring solutions solutions for for * Class Pipe such situations. such situations. These These solutions solutions eliminate eliminate the need the for need thrust for thrust blocks blocks so pipelines so pipelines can can be installed be installed DN10-2000 areas in where areas where space space is 28 limited - 26is limited or in unstable or in unstable N/A ground ground conditions conditions where - ** K9 Pipe where thrust thrust blocks blocks are not are an not option. an option. 60 Rapid Joint Rapid Blutop Rapid Anchor Anchor Vi Joint The Rapid joint is the standard joint for both potable water and sewerage application The Rapid for The all Blutop Rapid Anchor sizes Anchor Joint joint from is uses DN80-2000. joint a push-fit the uses same the joint The socket same to introduction be socket as used the with as push the of Saint-Gobain internally fit push version. fit version. and The PAM externally gasket UK s The Blutop gasket range of features features harmonised products. stainless stainless Suitable steel sockets teeth steel for for drinking moulded teeth all Saint-Gobain moulded water into networks the into PAM rubber. the UK for rubber. pipes sizes and OD75-0. fittings It offers has been substantial designed to benefits last more to than customers 100 years. in the UK and world-wide. Harmonisation of sockets means that How How just itone works: it joint works: can be used for both potable water and sewer products, with easy identification The Blutop Vi Joint of gaskets is the to anchored ensure correct version installation. of the Blutop The Joint Rapid and joint can be is a fitted proven in all pipes When When system and the joint fittings the and is joint under within has is been under pressure the used Blutop pressure successfully the range. teeth the The grip teeth and gasket the grip extensively pipe features the spigot pipe throughout stainless spigot and prevent and steel Europe prevent separation teeth and moulded separation the into of the of rest the joint. the rubber. of Rapid joint. the World Rapid Anchor for Anchor gaskets 50 years. gaskets can only can be only used be once, used although once, although the joint the can joint becan be remade remade using a using new a gasket. new gasket. How it works: Benefits: Benefits: Low The When cost, Low seal high the cost, is joint achieved performance high is under performance by the pressure pipeline compression pipeline the anchorage teeth anchorage of grip the the main pipe body spigot of the and elastomeric prevent separation gasket. of Quick As the Quick and the joint, pressure easy and making to easy install this to the install a main self-restrained increases, joint. the fish-tail The Blutop design Vi gasket of the can gasket only ensures be used that once, Eliminates the although Eliminates seal the tightens the need joint the for proportionally need can thrust be for re-made thrust blocks to blocks at using the changes pressure. at a new changes in gasket. direction in direction DN80-600 DN80-600 Proven Benefits: Proven solution solution over many over many years years Benefits: Ideal for Ideal Quick unstable for to unstable install ground and ground or dismantle where or where space space is limited is limited l Ease of laying Capable of angular deflection and longitudinal withdrawal with no loss of l Quick push fit joint with low insertion forces To determine To performance determine l the Fittings number the designed number of anchored with of anchored handles joints required joints for easy required of please insertion please contact contact Technical Technical Sales Sales Department, Department, l Provides Angular Tel: deflection 0115 opportunity Tel: 930 0115 0650/0700 of 930 to up reduce to 0650/0700 6 degrees or the use number or PipeSpec. use PipeSpec. of fittings For guidance For guidance on how on to how install to install Rapid Rapid Anchor Flexible l Anchor gaskets, Enables joint gaskets, to long please cope bends please request with without ground request our Installation the movement our use Installation of fittings Guide. Guide. This is This available is available to to l Additional safety against the hazards of earth and trench movements download download Easy from identification our from website, our website, of www.saint-gobain-pam.co.uk gaskets for water or sewerage or call or our call Brochure our Brochure Hotline, Hotline, l Low cost, high performance pipeline anchorage Tel: 0800 Tel: One 028 0800 joint 2134. 028 whatever 2134. the application l Eliminates the need for thrust blocks at changes in direction Rapid Rapid Anchor Anchor Joint utilises Joint utilises EPDM EPDM gaskets. gaskets. EPDM EPDM may not may be not suitable be suitable for all for sewerage all sewerage applications, applications, please please consult consult Technical Technical Sales Department Sales Department for information, information, Tel: 0115 Tel: 930 0115 930 0650/0700. Table 0650/0700. 10: Blutop pipe, Vi gasket Note: Rapid Note: The Blutop Rapid Anchor Joint Anchor Joint is a Gaskets Joint push-fit Gaskets are joint not to are colour be not used colour coded. with coded. Saint-Gobain Allowable PAM UK s Blutop Allowable range of DN/OD Pipe Class Operating products. Suitable for drinking water networks for sizes OD75-0. It has Deflection been designed (Degree) to Pressure (PFA) last more than 100 years. 75 C 6 Blutop Joints are compatible with PVC pipe conforming to EN 1452 or with HDPE pipe 90 C 6 conforming to EN 12201, i.e PVC and HDPE spigots conforming to the mentioned standards can be inserted 110 into Blutop pipe. C Please note that Blutop pipe spigots must not be 6 fitted into sockets 1designed for other joints C (plastic, or other cast iron parts) 6 How does 0 it work? C 6 The seal is achieved by the compression of the main body of the elastomeric gasket. As Note.- the Allowable pressure test pressure in the (PEA) main and allowable increases, maximum the operating concave pressure design (PMA) of can the easily gasket be calculated ensures for the that above the pipes seal by using the following formulas: tightens proportionally to the pressure PMA = PFA x 1.2 PEA = PMA + 5 bar 72 63 63

such situations. These solutions eliminate the need for thrust blocks so pipelines can be installed in areas where space is limited or in unstable ground conditions where thrust blocks are not an option. Universal Rapid Locked Rapid Anchor Vi Joint The Rapid Universal Vi Anchor joint Rapid uses joint Locked the uses same joint the socket same is available socket as the in as non-anchored diameters the push fit from version. DN80-1200. The gasket The joint features is capable stainless of operating steel teeth pressure moulded of up into 64 the the bar rubber. (depending on diameter) and is the joint used on PAM Directional pipes. How it works: How it work: When the joint is is under pressure the teeth grip the the pipe spigot and prevent separation of Anchorage the joint. is Rapid provided Vi Anchor gaskets by a gaskets locking can only can ring be only which used be once, used abuts although once, a weld although bead the joint on the the can joint pipe becan spigot be to remade prevent using joint separation. a new gasket. Section 3: Joints Benefits: Boltless Low cost, anchoring high performance system pipeline anchorage Up Quick to 64 and bar easy working to install pressure Used Eliminates on PAM the Directional need for thrust pipe blocks at changes in direction Up DN80-600 to 3 angular deflection Can Proven be solution used in trenchless over many applications years Ideal for unstable ground or where space is limited Universal Rapid Locked Joint Specification: To determine the number of anchored joints required please contact Technical Sales Department, Table 14 provides Tel: 0115 additional 930 0700 0650/0700 information or use PipeSpec. or regarding use PipeSpec. For joint guidance For performance. guidance on how on to how install to Rapid install Vi Rapid gaskets, Anchor please gaskets, request please our request Installation our Guide. Installation This is Guide. available This to is download available from to our website, Table download 14: www.saint-gobain-pam.co.uk Universal from our Rapid website, Locked: www.saint-gobain-pam.co.uk Water or and call Sewer our Brochure Hotline, or call our Tel: Brochure 0800 028 Hotline, 2134. Tel: 0800 028 2134. Rapid Vi Joint utilises EPDM gaskets. EPDM Pressure may not Rating be suitable (bar) for all sewerage applications, Rapid Anchor please Joint utilises consult EPDM Technical gaskets. Sales EPDM Department may not for be information, suitable for Tel: all 0115 sewerage Pipe 930 0700. Pipe Allowable applications, DN please consult Technical Sales Department Allowable for information, Allowable Tel: Length 0115 930 Class Operating Note: 0650/0700. Rapid Vi Gaskets are not colour coded. Test Pressure Deflection Pressure (mm) (PEA) (Degree) (PFA) Note: Rapid Anchor Joint Gaskets are not colour coded. 80 K9 64 82 3 5960 Rapid Vi Joint Specification Rapid Anchor Joint Specification Tables 100 11 to 13 give additional K9 information 64 regarding 82 the joint specification. 3 5960 Tables 8, 9 & 10 give additional information regarding the joint specification. Table 150 11: Water pipe K9 (Natural, System 55 CL or System 71 XL) - Rapid Vi 3 joint, 5990 Table EPDM 8: anchor Rapid gasket (EPDM Gasket) Water Pipe, C 200 K9 44 58 3 5960 Allowable Allowable 0 K9 39 52Pressure Rating 3 (bar) DN Pipe Class Operating Deflection 5960 300 DN K9 Pipe Class Allowable Pressure (PFA) Allowable (Degree) Allowable 37 49 3 5960 80 C Operating 22 Test Pressure 5 Deflection 350 100 K9 C 32Pressure (PFA) 43 (PEA) 3 5 (Degree) 5970 0 60 K9 C 30 41 35 150 C 35 5970 5 80 450200 C K9 C 30 23 41 32 34 5 5970 100 5000 C K9 C 30 23 41 32 24 5 5970 1 300 600 C C K9 27 22 37 31 3 2 5 5970 150 350 700 CC30 K9 18 35 26 3 2 5 6950 200 0 C C30 24 2 4 800 K9 35 1.5 6890 450 C30 13 2 0 C 24 4 900 K9 35 1.5 6870 500 C30 11 2 300 C 24 3 1000600 K9 C30 1035 12 6880 350 Note.- 1100 C K9 20 35 29 1 3 8150 0 1200 C K9 20 35 29 1 2 8150 - For information on product codes, weights and lengths for both system CL or system XL, please refer to tables 1 & 2 on page 15 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: PMA = PFA x 1.2 Table PEA = 9: PMA Rapid + 5 baranchor (EPDM Gasket) Water Pipe, K9 Pressure Rating (bar) 63 69 73

Section 3: Joints Rapid Anchor Joint Specification Table 12: Push-fit Anchor Gaskets (Rapid Vi) - EPDM Tables 8, 9 & 10 give additional information regarding the joint specification. DN Product Code Table 8: Rapid 80 (EPDM Gasket) Water Pipe, JSA80CA C 100 JSB10CA Pressure Rating (bar) DN 150 JSB15DA* Pipe Class Allowable Allowable Allowable 200 JSB20DA* Operating Test Pressure Deflection 0 Pressure JSBDA* (PFA) (PEA) (Degree) 60 300 C JSB30CA 35 5 80 350 C JSB35CA 23 32 5 100 0 C JSBCA 23 32 5 1 450 C JSB45CA 22 31 5 150 500 C JSB50CA 18 26 5 600 JSB60CA 200 C 24 4 *New anchor gasket developed by Saint-Gobain 0 C 24 4 Table 13: 300Sewer pipe-rapid CVi joint, EPDM anchor gasket 24 3 350 C Allowable 20 Allowable 29 3 DN Operating Deflection 0 Pressure C (PFA) 20 (Degree) 29 2 80 5 Table 9: Rapid Anchor (EPDM Gasket) Water Pipe, K9 100 5 150 5 Pressure Rating (bar) DN200 Pipe Class Allowable 4 Allowable Allowable Operating Test Pressure Deflection 0 12 4 Pressure (PFA) (PEA) (Degree) 60300 K9 12 3 53 5 350 80 K9 12 32 3 43 5 0 12 2 100 K9 32 43 5 450 11 2 1 500 K9 9 28 2 39 5 150 600 K9 8 2 35 5 200 K9 20 29 4 - Rapid anchor gaskets are manufactured from EPDM rubber for further information on gaskets please refer to table 12 - For information 0 on product codes, K9 weights and lengths please 20refer to table 3 on page 29 4 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: 300 K9 PMA = PFA x 1.2 20 29 3 PEA = PMA + 5 bar 350 K9 35 3 Nitrile anchor gaskets are currently being developed by Saint-Gobain PAM UK and are expected 0to be available in K92012. The above 23table will be updated 32 accordingly in 2 due course. 450 K9 22 31 2 500 K9 19 28 2 600 K9 18 26 2 74 64 Following the introduction of the new BS EN 545, Saint-Gobain PAM UK are introducing C30 pipe in 2010. The Rapid Anchor Joint will be available for C30 pipes.

ction : Section Joints 3: Joints 3: Joints 68 76 68 68 Advanced Solutions Universal Joint Advanced Solutions For very demanding applications such as trenchless installation or for restraint requirements under high pressures Saint-Gobain PAM UK recommends the Universal Universal Joint Joint Joint. The Universal joint offers boltless restraint solutions featuring a double For very For chambered demanding very demanding socket applications design. applications The such Universal as such trenchless as trenchless jointinstallation uses the installation same or for sealing restraint or for socket restrained restraint and gasket Universal Joint requirements Joint requirements as the Rapid under joint, under high with pressures high a second pressures Saint-Gobain chamber Saint-Gobain providing PAM UK PAM recommends for UK anchorage recommends the using Universal the either Universal an Joint. Joint. anchored The Universal The gasket Universal joint or offers a joint weld offers boltless bead boltless and restraint locking restraint solutions ring. solutions featuring featuring a double a double For chambered very For chambered demanding very socket demanding socket design. applications design. applications The Universal The such Universal as such trenchless joint as uses trenchless jointthe installation uses same the installation sealing same or for sealing socket restraint or for socket and restraint gasket and gasket requirements requirements Note: A selected under range under high of pressures high Universal pressures Saint-Gobain Rapid Fittings Saint-Gobain are as the as Rapid the Rapid joint, with joint, a with second a second chamber chamber providing providing PAM for UK PAM anchorage recommends anchorage available. for UK anchorage recommends using using Please the either using Universal either contact either anuniversal an the Joint. Joint. Technical Sales The Universal The Department Universal joint offers joint offers boltless for further boltless restraint details, restraint solutions Tel: 0115 930 0650/0700. anchored anchored gasket gasket or a weld or a bead weld and bead locking and locking ring. ring. solutions featuring featuring a double a double chambered chambered socket socket design. design. The Universal The Universal joint uses jointthe uses same the sealing same sealing socket socket and gasket and gasket as Note: the A as Note: selected the A Rapid joint, selected range with joint, range of a with second Universal of a second Universal chamber Rapid chamber Rapid Fittings providing Fittings providing are for available. anchorage are for available. anchorage Please using Please contact either using contact the either an the Universal Rapid an Anchor anchored Technical anchored Technical Sales gasket Department Sales gasket or a weld Department or a bead weld for further and bead for locking further and details, locking ring. details, Tel: ring. 0115 Tel: 930 01150650/0700. 930 0650/0700. The Universal Rapid Anchor joint is available in DN80-600. Universal Rapid Anchor Note: A Note: selected A selected range range of Universal of Universal Rapid Rapid Fittings Fittings are available. are available. Please Please contact contact the the operates up to a pressure of bar (depending on diameter). There is no need for a Universal Rapid Technical Rapid Technical Anchor Sales Vi Department Sales (Anchor) Joint weld bead on the Department pipe for spigot. further for further details, details, Tel: 0115 Tel: 930 01150650/0700. 930 0650/0700. The Universal The Universal Rapid Rapid Anchor Vi Anchor joint is joint available is available in DN80-600. in DN80-600. Universal Universal Rapid Vi Rapid Anchor operates Anchor up to a Universal Rapid operates Rapid operates How pressure Anchor up to it Vi a of up pressure works: 60 to bar (Anchor) a pressure (water) depending of bar depending of (depending on bar diameter. (depending on diameter. on There diameter). on is There diameter). no need There is no for need There is a no weld for need is no a bead weld for need on abead for the aon the weld bead weld pipe on spigot. Anchorage bead the on is pipe provided the spigot. pipe by spigot. the use of a separate Universal anchoring gasket with The Universal The moulded-in Universal Rapid stainless Rapid Anchor Vi Anchor steel joint teeth is joint available to is grip available in the DN80-600. pipe in DN80-600. spigot Universal to avoid Universal Rapid joint Vi Rapid Anchor separation. operates Anchor up to a operates How pressure operates How itup works: to it of a up pressure works: 60 to bar a pressure (water) of bar depending of (depending bar (depending on diameter. on diameter). on There diameter). There is no need There is no for need is no a weld for need abead for aon the weld bead pipe weld on spigot. bead the on pipe the spigot. pipe spigot. Anchorage Anchorage Benefits: is provided is provided by the by use the of use a separate of a separate Universal Universal anchoring anchoring gasket gasket with with moulded-in moulded-in Boltless stainless anchoring stainless steel teeth steel solution to teeth grip to the grip pipe the spigot pipe spigot to avoid to joint avoid separation. joint separation. How How it Simple works: itpush-fit works: joint with separate anchoring gasket Anchorage Anchorage Benefits: Benefits: Up is to provided is bar provided working by the by use pressure the of use a separate of a separate Universal Universal anchoring anchoring gasket gasket with with moulded-in Boltless moulded-in Boltless anchoring stainless anchoring stainless steel solution teeth steel solution to teeth grip to the grip pipe the spigot pipe spigot to avoid to joint avoid separation. joint separation. Simple push-fit joint with separate anchoring Universal Simple Rapid push-fit Anchor joint with Joint separate Specification: anchoring gasket gasket Benefits: Up to Benefits: Up bar to 60 working bar working (water) pressure working pressure pressure Boltless Boltless anchoring anchoring solution solution Table 13 provides additional information regarding the joint performance. Simple Simple push-fit push-fit joint with joint separate with separate anchoring anchoring gasket gasket Universal Rapid Rapid Anchor Anchor Vi Joint Joint Specification: Universal Up to Rapid Up bar to Vi working bar Joint working pressure Specification: pressure Tables 18 13: & Universal 19 provide Rapid additonal Anchor, information Water and regarding Sewer Pipe, the K9 joint performance. Table 18: Universal Rapid Vi, water Table Tables 13 provides 14 13 & provides 15 additional provide additional information information regarding regarding the joint the the performance. joint joint performance. Universal Rapid Rapid Anchor Anchor Joint Joint Specification: Pressure Rating (bar) Table 14: Universal Rapid Vi, water Prod Table Allowable 13: Table Universal 13: Universal Rapid Allowable Rapid Anchor, Pipe Allowable Pipe Anchor, Water and Sewer Pipe, Pipe Code DN Water and Pipe Sewer Allowable Pipe, K9 K9 AllowablePipe Spigot OD Socket OD Universal DN Code Pipe ClassTable Operating 13 Table provides 13 provides additional Deflection additional Class Operating Length information information Length regarding regarding Test the joint the performance. joint performance. Pressure mm (ØDE) Pressure Pressure Rating mm Deflection Weight Rating (bar) (ØDE) Anchoring Prod Code Prod Pipe Pressure Allowable (PFA) Allowable (Degree) Pressure (mm) Pipe (bar) (Kg/m) Pipe (mm) Spigot (PEA) OD Socket (Degree) OD Universal DN Code Pipe Class Operating Deflection Table 13: Table Universal 13: Universal Rapid Rapid Anchor, Length Weight Gasket Pipe Pipe Pipe Allowable Anchor, Water Allowable (PFA) mm (ØDE) mm (ØDE) Pipe Anchoring 80 NGA80N60 Pipe C100 Pressure 60 (PFA) (Degree) 3 Water and (mm) 5970Sewer and Sewer Pipe, K9 Pipe, K9 DN DN Allowable Allowable 98 Allowable 159 (Kg/m) Allowable.0 ANA80CA6 80 K9 Length Class Class Operating Operating 35 3 Length 5960 Gasket 100 80 NGA80N60 NGB10N60 C100 60 56 3 Test Pressure Test Pressure Deflection Deflection Pressure Rating Rating (bar) (bar) Pressure Pressure 5970 118 98 159 188.0 19.5 (mm) (mm) ANA80CA6 ANB10CA6 100 K9 Pipe Pipe Pipe Allowable Allowable (PEA) (PEA) 35 (Degree) (Degree) 3 5960 (PFA) (PFA) Pipe 100 150 NGB10N60 NGB15N60 C100 C64 56 48 3 5970 118 170 188 230 19.5 29.0 ANB10CA6 ANB15CA5 DN 150 DN K9 Allowable Allowable Allowable Allowable 80 80 Length Class K9 Class K9 Operating Operating 35 35 35 3 3 Length 5960 5990 5960 150 200 NGB15N60 NGB20N60 C64 48 43 3 5970 Test Pressure Test170 222 Pressure Deflection 230 290 Deflection29.0.0 ANB15CA5 ANB20CA4 200 K9 Pressure Pressure (mm) (mm) 100 100 K9 K9 (PEA) 35 (PEA) 35 35 (Degree) 3 (Degree) 3 5960 5960 5960 200 0 NGB20N60 NGBN60 C64 C50 43 39 3 (PFA) (PFA) 5970 222 274 290 350.0 52.5 ANB20CA4 ANBCA4 150 0 K9 35 3 5960 80 150 80 K9 K9 35 35 3 5960 5990 5960 5990 0 300 NGBN60 NGB30N60 C50 39 34 3 5970 274 326 350 8 52.5 67.5 ANBCA4 ANB30CA4 300 K9 35 3 5960 100 200 100 200 K9 K9 35 35 3 5960 5960 300 350 NGB30N60 NGB35N60 C50 C 34 3 5970 326 378 8 463 67.5 83.5 ANB30CA4 JNB35CA 350 K9 35 3 5970 150 0 150 0 K9 K9 35 35 3 5990 5960 5990 5960 350 0 NGB35N60 NGBN60 C 20 3 5970 378 429 463 510 83.5 98.0 JNB35CA JNBCA 0 K9 20 29 3 5970 200 300 200 300 K9 K9 35 35 3 5960 5960 0 450 NGBN60 NGB45N60 C 20 3 5970 429 480 510 570 117.5 98.0 JNBCA JNB45CA 450 K9 24 3 5970 0 350 0 350 K9 K9 35 35 3 5960 5970 5960 5970 450 500 NGB45N60 NGB50N60 C 32 5970 480 532 570 6 117.5 139.0 JNB45CA JNB50CA 500 K9 24 2 5970 300 0 300 0 K9 K9 20 20 35 29 35 29 3 3 5960 5970 5960 5970 500 600 NGB50N60 NGB60N60 C 2 5970 532 635 6 7 139.0 188.0 JNB50CA JNB60CA 600 K9 24 2 5970 350 450 350 450 K9 K9 K9 35 24 35 24 3 3 5970 5970 600 NGB60N60 C 2 5970 635 7 188.0 JNB60CA - Lengths and weights are provided for estimation purposes 0 500only 0 500 and actual values K9 may K9 K9 vary from 20 those provided 20 in these 29 24 tables 29 24 32 32 5970 5970 - For information on Rapid gaskets water please refer to page 70 - Lengths Allowable and test weights pressure are (PEA) provided and allowable for estimation maximum purposes operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: 450 600only 450 600 and actual values K9 may K9 K9 vary from those provided in these 24 tables 24 24 32 32 5970 5970 - For information on Rapid gaskets water please refer to page 70 - PMA Allowable = PFA x test 1.2 pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: PEA PMA = PMA = PFA + x 5 1.2 bar 500 500 K9 K9 24 24 2 2 5970 5970 PEA = PMA + 5 bar - Limited range of Universal fittings available for DN350 600 and DN450. 600Please contact K9 our K9 Technical Sales Department for 24 further details, 24 Tel. 0115 2 930 0700 2 5970 5970 75

Universal Rapid Locked Section 3: Joints 76 Table The Universal 12: Universal Rapid Rapid Locked Vi, joint sewer is available in diameters from DN80-1200. The joint Table 15: Universal Rapid Vi, Sewer is capable of operating pressure of up to 64 bar (depending on diameter) and is the joint used on PAM Directional pipes. Prod Code Prod Allowable Allowable Pipe Pipe Length Spigot OD Socket OD Universal DN Code Operating Deflection Weight How it work: (mm) mm (ØDE) mm (ØDE) Anchoring Pipe Pressure (PFA) (Degree) (Kg/m) Gasket Anchorage is provided by a locking ring which abuts a weld bead on the pipe spigot to 80 TGA80N60 60 prevent 3 joint separation. 5970 98 159 15.5 ANA80CA6 100 TGB10N60 56 3 5970 118 188 19.0 ANB10CA6 Benefits: 150 TGB15N60 48 3 5970 170 230 28.0 ANB15CA5 Boltless anchoring system 200 TGB20N60 43 Up to 364 bar working 5970 pressure 222 290 38.5 ANB20CA4 0Advanced TGBN60 39 Solutions Used 3on PAM Directional 5970 pipe 274 350 51.5 ANBCA4 Up to 3 angular deflection 300 TGB30N60 34 3 5970 326 8 64.5 ANB30CA4 Can be used in trenchless applications 350 TGB35N60 3 5970 378 463 83.5 JNB35CA 0 TGBN60 Universal 20 Joint 3 5970 429 510 98.0 JNBCA Universal Rapid Locked Joint Specification: 450 TGB45N60 3 5970 480 570 114.0 JNB45CA For very demanding applications such as trenchless installation or for restraint Table 14 provides additional information regarding joint performance. 500 TGB50N60 requirements 2 under high 5970pressures Saint-Gobain 532 PAM 6 UK recommends 135.5 the Universal JNB50CA 600 TGB60N60 Joint. The Universal joint offers boltless restraint solutions featuring a double Notes: Table 14: 2 Universal Rapid 5970Locked: Water 635and Sewer 7 174.0 JNB60CA - chambered Length and weight socket are provided design. for estimation The Universal purposes only joint and uses actual values the same may vary sealing from those socket provided and in these gasket tables. - Lengths and weights are provided for estimation purposes as the only and Rapid actual joint, values with may vary a from second those chamber provided in these providing tables for anchorage using either an - For information on Rapid gaskets sewer please refer to page 71 Pressure Rating (bar) - Allowable test pressure (PEA) and allowable maximum anchored operating pressure gasket (PMA) or for a the weld above bead pipes can and easily locking be calculated ring. by using the following formulas: Pipe PMA = PFA x 1.2 Pipe Allowable PEA = PMA + 5 bar DN Allowable Allowable Note: A selected range Length Class of Universal Operating Rapid Fittings are available. Please contact the - Limited range of Universal fittings available for DN350 and DN450. Please contact our Technical Sales Department for further Test Pressure details, Tel. 0115 Deflection 930 0700 Technical Sales Department for further Pressure details, Tel: 0115 930 0650/0700. (mm) (PEA) (Degree) (PFA) Universal Universal Rapid Anchor 80 K9 64 82 3 5960 100 K9 64 82 3 5960 The Universal Rapid Anchor joint is available in DN80-600. Universal Rapid Anchor operates 150up to Joint a pressure K9 of bar 55 (depending on 71diameter). There 3 is no need 5990 for a weld bead on the pipe spigot. 200 K9 44 58 3 5960 The Universal Rapid Ve Locked joint joint is available is available in DN100 in diameters - 1200. The from joint DN80-1200. is capable of The operating joint How 0it works: pressure K9 39 52 3 5960 is capable of of up operating to 64 bar pressure (depending of up on to diameter) 64 bar (depending and is the joint on diameter) used on PAM and Direxional is the pipes. Anchorage joint used is provided by the use of a separate Universal anchoring gasket with 300 on PAM Directional K9 pipes. 37 49 3 5960 moulded-in stainless steel teeth to grip the pipe spigot to avoid joint separation. How 350 it work: works: K9 32 43 3 5970 Benefits: Anchorage 0 is provided K9by a locking 30 ring which abuts 41 a weld bead 3on the pipe 5970 spigot to Boltless anchoring solution prevent joint separation. Simple 450 push-fit joint K9 with separate 30 anchoring 41 gasket 3 5970 Up to bar working pressure Benefits: 500 K9 30 41 2 5970 Boltless anchoring system 600 K9 Up to 64 bar working pressure 27 37 2 5970 Used 700 on PAM Direxional Directional K9 pipe 35 2 6950 Table Up 13 to 3 provides angular additional deflectioninformation regarding the joint performance. 800 K9 35 1.5 Can be used in trenchless applications 6890 Table 900 13: Universal Rapid K9 Anchor, Water and Sewer 35 Pipe, K9 1.5 6870 Universal Rapid Ve Locked (Locked) Rapid Anchor Joint Specification: Universal Rapid Locked Joint Specification: 1000 K9 Pressure 35 Rating (bar) 1 6880 1100 Pipe Allowable Pipe Table DN 14 provides additional K9 information 35 1 Length 8150 Class Operating regarding Allowable joint performance. Allowable Test Pressure Deflection 1200 K9 Pressure 35 1 (mm) 8150 Table 14: Universal Rapid Locked: Water (PEA) (Degree) (PFA) and Sewer 80 K9 35 3 5960 Pressure Rating (bar) 100 K9 35 3 5960 Pipe Pipe Allowable 69

Section 3: Joints 64 Universal Universal Table : Universal Rapid Ve, water Rapid Ve Joint Specification: Table & 17 provides additional information regarding joint performance. Rapid Locked Rapid Anchor Joint Specification The Universal Rapid Locked joint is available in diameters from DN80-1200. The joint Allowable Prod code Prod is capable of Allowable operating pressure of up to 64 bar (depending on diameter) Pipe Operating Pipe Length Spigot OD Socket OD and is the Universal DN Code Pipe Class Tables joint used 8, 9 on & Deflection Pressure 10 PAM give Directional additional pipes. information regarding the joint specification. Weight (mm) mm (ØDE) mm (ØDE) Locking Pipe (Degree) (Kg/m) (PFA) Ring 100 NFB10N60 C100 Table 64 8: Rapid (EPDM 3 Gasket) 5970 Water Pipe, C 118 188 19.5 1109 How it work: 150 NFB15N60 C64 Anchorage 60 is provided 3 by a locking 5970 ring which 170 abuts Pressure a weld 230Rating bead on (bar) the 29.0pipe spigot AKB15E to 200 NFB20N60 C64 prevent 52 joint separation. 3 5970 DN Pipe Class Allowable 222 Allowable 290.0Allowable AKB20E 0 NFBN60 C50 46 3 5970 Operating 274 Test 350Pressure 52.5Deflection AKBE Benefits: Pressure (PFA) (PEA) (Degree) 300 NFB30N60 C50 41 Boltless anchoring 3 system5970 326 8 67.5 AKB30E 60 C 35 5 350 NFB35N60 C 38 Up to 64 bar working 3 pressure 5970 378 463 83.5 JKB35E Used 80 on PAM Directional Cpipe 23 32 5 0 NFBN60 C 35 3 5970 429 510 98.0 JKBE Up to 3 angular deflection 450 NFB45N60 C 100 C 23 32 5 32 Can be used in 3trenchless applications 5970 480 570 117.5 JKB45E 500 NFB50N60 C 30 1 2 C 5970 22 532 631 139.0 5 JKB50E Universal Rapid Locked Joint Specification: 600 NFB60N60 C 30 150 2 C 5970 18 635 726 188.0 5 JKB60E 700 NFB70N60 C30 27 200 2 C 5970 738 863 24 229.0 4 110671 Table 14 provides additional information regarding joint performance. 800 SFB80N70 C30 1.5 6890 842 974 278.0 JFB80S 0 C 24 4 900 SFB90N70 C30 Table 14: Universal 1.5 Rapid Locked: 6870 Water and 945 Sewer 1082 349.0 JFB90S 300 C 24 3 1000 SFC10N70 C30 1 6880 1048 1191 3.0 JFC10S 350 C Pressure 20 Rating (bar) 29 3 1200 SFC12N80 C30 1 8150 15 1412.5 521.5 Pipe JFC12S DN 0 Pipe Allowable C 20Allowable 29 Allowable Length 2 Class Operating Test Pressure Deflection Pressure (mm) Table 9: Rapid Anchor (EPDM Gasket) Water Pipe, (PEA) K9 (Degree) (PFA) Notes. - - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables. - For information on Rapid gaskets water please refer to page 70. Table 17: Universal Rapid Ve, sewer 80 K9 64 82Pressure Rating 3 (bar) 5960 DN 100 DN K9 Pipe Class 64 Allowable 82 Allowable 3 Allowable 5960 Allowable Operating Test Pressure Prod code Allowable Pipe Deflection Prod Operating 150 K9 Spigot OD 55 Socket OD Pressure (PFA) 71 Weight Universal Deflection Length (PEA) 3 (Degree) 5990 code Pressure mm (ØDE) mm (ØB) (Kg/m) Locking (Degree) (mm) (PFA) 200 60 K9 K9 44 58 53 Ring 3 5960 5 100 209956 64 3 0 80 5970 K9 K9 118 39 188 32 52 19.0 43 1109 3 5960 5 150 209958 60 3 5970 170 230 28.0 AKB15E 300 100 K9 K9 37 32 49 43 3 200 209959 52 3 5970 222 290 38.5 AKB20E 5960 5 350 1 K9 K9 32 28 43 39 3 0 209960 46 3 5970 274 350 51.5 AKBE 5970 5 300 209981 41 0 150 3 5970K9 K9 326 30 8 41 64.5 35 3AKB30E 5970 5 350 209983 38 3450 200 5970K9 K9 378 30 20 463 41 83.5 29 3JKB35E 5970 4 0 209984 35 3500 0 5970K9 K9 429 30 20 510 41 98.0 29 2JKBE 5970 4 450 214457 32 3 600 300 5970 K9 K9 480 27 20 570 37 114.0 29 JKB45E 2 5970 3 500 209985 30 2 350 700 5970 K9 K9 532 6 35 135.0 35 JKB50E 2 3 6950 600 209986 30 2 5970 635 7 174.0 JKB60E 0 K9 23 32 2 800 K9 35 1.5 6890 700 209385 27 2 5970 738 863 228.5 110671 450 K9 22 31 2 900 K9 35 1.5 6870 500 1000 K9 K9 19 35 28 1 2 6880 600 1100 K9 K9 18 35 26 1 2 8150 Notes. - - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on Rapid gaskets please refer to page 71 - For information on DN800-1200 please contact our Technical Department - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar 1200 K9 35 1 8150 Following the introduction of the new BS EN 545, Saint-Gobain PAM UK are introducing C30 pipe in 2010. The Rapid Anchor Joint will be available for C30 pipes. 69 77

Section 3: Joints PAMLOCK Joints The PAMLOCK joint is used on pipes and fittings, DN10-2000 where self restrained joints are required. How it works: Anchorage is provided by the addition of a welded bead bead onto onto the the pipe pipe spigot, spigot, and and a a segmented locking ring which abuts the welded bead bead and and a conformator a which which restricts the diameter of the socket mouth and is held in place by two locking clamps. The conformator is filled with steel shot to complete the joint. Benefits: Boltless anchoring system Up to Bar working pressure PAMLOCK Joint Specification Table 18 15 provides additional information regarding joint performance. Table 18: PAMLOCK Table 15: PAMLOCK, Water and Sewer Application Prod code Allowable Pressure Rating (bar) Allowable Operating Pipe Length Spigot OD Socket OD Weight DN Pipe Class Deflection Pipe Pipe Allowable Water Sewer Pressure (mm) mm (ØDE) mm (ØDE) (Kg/m) DN (Degree) Allowable Allowable (PFA) Length Class Operating Test Pressure Deflection Pressure (mm) 10 SPC14N80 120351 C 1 8170 (PEA) 1462 (Degree) 20.1 695 (PFA) 00 SPCN80 120623 C 10 K9 1 80 35 68 1 1868.0 873 8120 1800 SPC18N80 TPC18N80 C 1500 K9 0.5 8150 35 1875 1 2075.3 1065 8110 2000 Enquire Enquire C 00 Enquire K9 Enquire 8130 35 2082 Enquire 1 Enquire 8100 - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables. - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar 1800 K9 24 0.5 8080 2000 K9 Enquire Enquire Enquire 8030 78 70

Section 3: Joints Rapid Rapid Rapid 200 DN Benefits: Allowable 13Operating Allowable 21 Allowable 4Deflection 600 8 15 2 Provision for anchorage Pressure whilst maintaining (PFA) Test flexibility Pressure (PEA) (Degree) 0 12 19 4 Note: Eliminates Rapid anchor need for gaskets thrusts are blocks manufactured from EPDM rubber. Ideal for 300 80 unstable ground or where 12 23 space is limited 19 32 3 5 Suitable for higher pressure mains 350 100 14 23 22 32 3 5 Weld bead can be applied on site* Requires 0 1 a minimal number of 14 22fittings compared to 22 31other ductile iron anchor 2 5 Table The 10: Rapid Anchor (EPDM Gasket) Sewerage Pipe solutions Rapid Ve Mechanical joint utilises joint the utilises same socket the same and socket gasket and as the gasket Rapid as push-fit the push-fit version. version. 450 150 12 19 24 2 5 How it works: Pressure Ratings (bar) * Please refer 500 200 to the Installation 10 13 Guide for required equipment. 17 21 2 4 Anchorage DNis provided by the addition of the Rapid mechanical anchor kit which Allowable Operating Allowable Allowable Deflection comprises: 600 0 12 Pressure 8 (PFA) Test Pressure 15 19 (PEA) (Degree) 2 4 1. Factory-applied weld bead on the pipe spigot. Where pipes have been cut, the bead Note: Rapid 300anchor gaskets are 12 manufactured from EPDM 19 rubber. 3 can also be welded on site, please refer to the Installation Guide. 80 23 32 5 2. A locking 350 ring (single piece DN80-700, 14 segmented 22 DN800-1200) which abuts 3 the welded bead. 100 bead. 23 32 5 3. A bolted 0 gland which tightens 14against the pipe socket 22 using hook bolts and 2 retains the locking 1 ring. 22 31 5 The Rapid 450 Mechanical joint utilises 12 the same socket and 19 gasket as the push-fit 2 version. 150 24 5 Benefits: 500 10 17 2 How Provision it200 works: for anchorage whilst 13maintaining flexibility 21 4 Anchorage Eliminates 600 is provided need for thrusts by the addition blocks 8 of the Rapid mechanical 15 anchor kit which 2 0 12 19 4 comprises: Ideal for unstable ground or where space is limited Note: Rapid anchor gaskets are manufactured from EPDM rubber. 1. Factory-applied Suitable for higher 300 weld pressure bead on mains 12 the pipe spigot. Where 19 pipes have been cut, 3 the bead can Weld also bead be can welded be applied on site, on please site* refer to the Installation Guide. 2. A Requires locking 350 a ring minimal (single number piece DN80-700, of 14fittings segmented compared to 22 DN800-1200) other ductile which iron anchor abuts 3 the welded solutions bead. 3. A bolted 0 gland which tightens 14 against the pipe socket 22 using hook bolts and 2 retains Note.- The Rapid Mechanical joint utilises the same socket and gasket as the push-fit version. the locking 450 ring. * Please Please refer refer to to the the Installation Installation Guide 12 Guide for for required required equipment. equipment. 19 2 Ve (Mechanical) Joint Mechanical Mechanical How it works: Benefits: 500 10 17 2 Rapid Mechanical Joint Specification Rapid Anchorage Provision Ve is for provided Joint anchorage by Specification the whilst addition maintaining of the Rapid flexibility mechanical anchor kit which comprises: Eliminates 600 need for thrusts blocks 8 15 2 Tables 11 & 12 provide additional information Tables19 1. Factory-applied regarding & 20 provide the Note: Ideal Rapid for unstable weld joint additional anchor gaskets ground bead specification are or on information where the pipe and manufactured space spigot. dimensions. regarding is limited Where the pipes joint have specification been cut, and the bead dimensions. from EPDM rubber. can Suitable also be for welded higher pressure on site, please mainsrefer to the Installation Guide. Table 11: 19: Rapid Mechanical, Ve (Mechanical) Water water Pipe, pipe 2. K9 A Weld locking bead ring can (single be applied piece on DN80-700, site* segmented DN800-1200) which abuts the welded Requires bead. Rapid Pressure Rating Mechanical (bar) a minimal External External number Diameter of fittings (OD) (OD) compared to other ductile iron Bolts anchor Bolts Allowable 3. A solutions bolted Allowable gland which tightens against the pipe socket using hook bolts and retains Prod Pipe Operating Nom. Max. Max. Pipe the locking ring. Pipe Weight DN Pipe Allowable Allowable Deflection Nom. Max. Max. DN code Class Pressure The Allowable Rapid Mechanical Pipejoint utilises Pipe the Anchor Length same socket Length and gasket (Kg/m) as the push-fit version. Length Class Operating Test (Degree) Pipe Pipe Anchor (mm) No. Dia (PFA) Barrel Socket Gland Length (mm) * Please Deflection Benefits: refer to the Installation Guide for required (mm) equipment. No. Dia Pressure Pressure Barrel OD Socket OD Gland OD (mm) How (Degree) it works: 350 NQB35G60 (PFA) C30 (PEA) 27 Provision 3 for anchorage OD378 whilst OD465maintaining OD570 flexibility 6000 68.0 8 M27 102 0 80 NQBG60 K9 C30 64 82 Anchorage Eliminates is provided need for thrusts by the addition blocks of the Rapid mechanical anchor kit which 5 3 98429 8517 234618 5500 6000 79.5 4 10 M22 M27 70 comprises: Ideal for unstable ground or where space is limited 102 450 100 NQB45G60 K9 C30 64 82 23 1. Factory-applied Suitable 5 3 for higher 118 weld 480 pressure bead 189on 575 mains the pipe 5671 spigot. 5500 Where 6000 pipes 93.5 4 have been 14 M22cut, M27 the 70 bead 102 500 NQB50G60 C30 22 can Weld also bead 3 can welded be 532 applied on site, on 630 please site* refer 734 to the Installation 6000 110.0 Guide. M27 102 1 K9 64 82 5 144 2 285 6000 6 M22 70 2. A Requires locking a ring minimal (single number piece DN80-700, of fittings segmented compared to DN800-1200) other ductile which iron anchor abuts the 600 NQB60G60 C30 20 3 635 739 8 6000 149.0 20 M27 102 150 K9 55 71 welded solutions 5 bead. 170 243 311 5500 6 M22 70 700 SQB70H70 C 3. A bolted 2 gland which 738 tightens 863against958 the pipe 6960 socket using 186.0hook 24 bolts and M27retains 123 200 K9 44 58 4 222 296 364 5500 8 M22 70 800 SQB80H70 C the locking 2 ring. 842 974 1100 6950 229.0 30 M27 123 * Please refer to the Installation Guide for required equipment. 0 K9 39 52 4 274 353 457 5500 6 M27 102 900 SQB90H70 C 1.5 945 1082 1218 6950 276.0 28 M27 123 Benefits: 1000 300 SQC10H70 K9 C 37 49 Provision 41.5 for anchorage 3261048 410 whilst 1191maintaining 5 1306 flexibility 5500 6960 330.5 8 30 M27 M27 102 123 1200 350 SQC12H80 K9 C 32 43 Eliminates 31.5 need 37815 for thrusts 4651412 blocks 570 1547 5500 8190 461.5 8 M27 M27 102 123 Ideal for unstable ground or where space is limited 0 K9 30 41 Suitable 3 for higher 429 pressure 517 mains 618 5500 - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables. 10 M27 102 - For anchoring solutions DN80-DN300 please refer to Universal 450 K9 30 41 Weld joint or 3 bead enquire. can 480 be applied 575 on site* - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily 671 be calculated by 5500 using the following 14 formulas: M27 102 PMA = PFA x 1.2 Requires a minimal number of fittings compared to other ductile iron anchor PEA 500 = PMA + 5 bar K9 30 41 solutions 3 532 630 734 5500 M27 102 65 65 65 65 600 K9 27 37 3 635 739 8 5500 20 M27 102 700 K9 35 * Please 2 refer to the 738 Installation 863 Guide 958 for required 5500 equipment. 24 M27 123 800 K9 24 2 842 974 1100 5500 30 M27 123 65 79

Table 12: 20: Rapid Mechanical, Ve (Mechanical) Sewerage sewer Pipe pipe Pressure Ratings (bar) External Diameter (OD) (OD) Bolts Allowable Allowable Prod Operating Nom. Max. Max. Pipe Allowable Allowable Nominal PipeWeight DN Deflection Maximum DN codes Pressure Allowable Pipe Maximum Pipe Anchor Length Operating Test Pipe Anchor Length (Kg/m) Length (Degree) (mm) No. Dia (PFA) Barrel Socket Gland (mm) Length Deflection Socket Pressure Pressure Barrel Gland (mm) No. Dia OD OD OD (mm) (Degree) OD 150 TQB15S60 (PFA) (PEA) 50 5 OD 170 243 311 OD 6000 23.5 6 M22 70 20080 TQB20S60 44 4 222 296 364 6000 30.5 8 M22 70 0 100 TQBS60 39 4 274 353 457 6000.0 6 M27 102 300 1 TQB30S60 37 4 326 410 5 6000 50.5 8 M27 102 350 TQB35S60 27 3 378 465 570 6000 66.5 8 M27 102 150 See Table 11 for values 0 TQBS60 3 429 517 618 6000 78.0 10 M27 102 200 450 TQB45S60 23 3 480 575 671 6000 92.5 14 M27 102 0 500 TQB50S60 22 3 532 630 734 6000 106.5 M27 102 600 300 TQB60S60 20 3 635 739 8 6000 138.0 20 M27 102 700 350 TQB70E69 19 28 32 378 738 863 465 958 570 69505500199.0 8 24 M27 123 102 800 0 TQB80E69 18 26 32 429 842 974 517 1100 618 69505500243.5 1030 M27 M27 123 102 900 TQB90E69 1.5 945 1082 1218 6950 291.5 28 M27 123 450 18 26 3 480 575 671 5500 14 M27 102 1000 TQC10E69 1.5 1048 1191 1306 6955 343.0 30 M27 123 500 18 26 3 532 630 734 5500 M27 102 1200 TQC12N79 1.5 15 1412 1547 8185 507.5 M27 123 600 24 3 635 739 8 5500 20 M27 102 - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables. - For anchoring solutions DN80-DN100 please refer to Universal joint or enquire. - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) for the above pipes can easily be calculated by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar 700 20 29 2 738 863 958 5500 24 M27 123 800 13 21 2 842 974 1100 5500 30 M27 123 900 13 21 1.5 945 1082 1218 6950 28 M27 123 1000 13 21 1.5 1048 1191 1306 6950 30 M27 123 1100 24 1.5 1151 1300 1417 8190 M27 123 1200 24 1.5 15 1412 1547 8180 M27 123 Note: DN80-300 are supplied in K9 thickness only. 80 67

D D PCD PCD g g D PCD g b b b b a aa a b b a a Flange Joint UTI UTI DN300 PN10 PN PN/ DN350-600 DN350-600 PN10 PN PN/ DN700-1200 DN700-1200 PN10 PN PN/ DN10-2000 DN10-2000 PN10 PN PN/ Flanged joints are rigid an Flanged Table : joints Pressure are are rigid rigid capabilities and and are are typically used used in in above ground applications. risk Due of Due excessive to to the the bending m risk risk of of excessive bending moments being imposed it it is is recommended that that pipework flanged is NOT buried. In pipework is is NOT NOT buried. In In certain situations it it may Pressure may be be necessary Capability to to bury bury flange pipework, please contact T Diameter Band pipework, please contact Technical Low Sales Department Medium for for advice, Tel: Tel: 0115 930 0650/0700. High 930 0650/0700. UTI DN300 PN10 PN PN/ Benefits: Benefits: Strength of DI supports DN350-600 PN10 PN b b PN/ Strength of of DI DI supports external bending moment making it it ideally suited ground for for above applications a a ground DN700-1200 applications PN10 PN PN/ High beam strength acc High High DN10-2000 beam strength accommodates PN10 spans up up to to m m PN PN/ No risk of performance No No risk risk of of performance loss loss through UV UV degradation Wide range of flanges a D PCD g Wide range of of flanges available in in PN10-PN. g Flanged joints are rigid and are typically used in above ground applications. Due to the Fixed risk of excessive Flanged bending Joint moments Sets: being imposed it is recommended that flanged Joint sets are available to o pipework is NOT buried. In certain situations it may be necessary to bury flange Joint Joint sets sets are are available to to order for for use use with with fixed flanges, these sets sets contain components all all required for f pipework, please contact Technical Sales Department for advice, Tel: 0115 930 components required for for fixed flanged joints. 0650/0700. Inside Bolt Circle (IBC) g Inside Full face Bolt Bolt gasket Circle (IBC) 80 (IBC) IRHD gasket hardness 80 80 IRHD hardness Mild steel (grade 4.6) bo Benefits: Mild Mild steel steel (grade 4.6) 4.6) bolts, nuts nuts and and washers coated rilsan coated to to water to industry water industry specification (WIS) specification 4-52-03 (WIS) Strength 4-52-03 of DI supports external bending moment making it ideally suited for above ground applications EPDM gaskets are supplied EPDM High gaskets beam are strength are supplied accommodates for for use use in in potable spans water up to applications m and and Nitrile sewerage gaskets for applications. for sewerage No risk applications. of performance loss through UV degradation Wide range of flanges available in PN10-PN. Fixed Flanged Joi Fixed Flanged Joint Sets: All PN fixed flange joint sets supplied by Saint-Gobain as standard comply with the Civil Joint Engineering sets are available Specification to order for for use the with Water fixed Industry flanges, (CESWI) these sets 7th contain edition. all components required for fixed flanged joints. Inside Bolt Circle (IBC) gasket 80 IRHD hardness Mild steel (grade 4.6) bolts, nuts and washers coated to water industry specification (WIS) 4-52-03 EPDM gaskets are supplied for use in potable water applications and Nitrile gaskets for sewerage applications. 71 71 71 81

D Section 3: Joints D PCD PCD g g D PCD PCD g g b b a a & 20 provide additional Tables 17, 18, information 19 & 20 provide regarding additional fixed flange information joint dimensions. regarding fixed flange joint dimensions. b a b a Table 21: Fixed flanges PN langes PN Flanges Table 17: (standard Fixed Flanges range) PN Flanges (standard range) a b Bolt Hole Bolt Bolt Prod Code DN DBolt Hole gdetails Bolt Hole Details Size Details Bolt size Size D g DN a Water D b Sewer g PCD a No. b Dia PCD Dia No. PCD Length (mm) No. Dia Dia Dia Dia Length Length (mm) (mm) 200 132 80 80 19.0 228458 200.0228480 132 0 200 19.0 8132.0 19.0 0.0M 80 65 819 19 M M 65 70 220 156100 100 19.0 228460 220.0228481 156 180 220 19.0 8156.0 19.0 180.0M 8180 65 819 19 M M 65 70 285 211150 150 19.0 228471 285.0228482 211 2 285 19.0 8211.0 19.0 23 2.0M20 82 70 823 23 M20 M20 70 80 3 266200 200 20.0 228472 3 17.0228483 266 295 3 20.0 1226617.0 20.0 23 29517.0M20 12 295 70 1223 23 M20 M20 70 80 0 3190 0 22.0 228473 0 19.0228484 319 355 0 22.0 1231919.0 22.0 28 35519.0M24 12 355 85 1228 28 M24 M24 85 90 455 370300 300 24.5 228474 455 20.5228485 370 410 455 24.5 1237020.5 24.5 28 41020.5M24 12 410 85 1228 28 M24 M24 85100 520 429350 350 26.5 228475 520 22.5228486 429 470 520 26.5 42922.5 26.5 28 47022.5M24 470 85 28 28 M24 M24 85100 580 4800 0 28.0 228476 580 24.0228487 480 5 580 28.0 48024.0 28.0 31 524.0M27 5 100 31 31 M27 M27 100 100 6 548450 450 30.0 228477 6 26.0228488 548 585 6 30.0 2054826.0 30.0 31 58526.0M27 20 585 100 2031 31 M27 M27 100110 715 609500 500 31.5 228478 715 27.5228489 609 650 715 31.5 2060927.5 31.5 34 65027.5M30 20 650 110 2034 34 M30 M30 110115 8 720 600 600 36.0 228479 8 31.0 228490 720 770 8 36.0 20 720 31.0 36.0 37 770 31.0 M33 20 770 120 20 37 37 M33 M33 120 130 910 794 700 700 39.5 229045 910 34.5 229054 794 8 910 39.5 24 794 34.5 39.5 37 8 34.5 M33 24 8 130 24 37 37 M33 M33 130 135 10 901 800 800 43.0 229047 10 38.0 229056 901 950 10 43.0 24 901 38.0 43.0 950 38.0 M36 24 950 1 24 M36 M36 1 155 11 1001 900 900 46.5 229050 11 41.5 229058 1001 1050 11 46.5 28 1001 41.5 46.5 1050 41.5 M36 28 1050 1 28 M36 M36 1 155 15 1112 1000 1000 50.0 229051 15 45.0 229060 1112 1170 15 50.0 28 1112 45.0 50.0 43 45.0 1170 M39 1170 28 0 28 43 43 M39 M39 5 0 1355 1200 12181100 229052 53.5 1355 229061 48.5 1218 1485 1270 53.5 1328 32 48.5 57.0 43 52.0 1270 M39 1390 32 32 0 43 49 M45 M39 190 0 1485 10 13281200 Enquire 57.0 1485 Enquire 52.0 1328 85 1390 57.0 1530 32 52.0 60.0 49 55.0 1390 M45 1590 32 36 180 49 49 M45 M45 Enquire* 180 85 00 153010 Enquire 60.0 85 Enquire 55.0 1530 1930 1590 60.0 170 36 55.0 65.0 49 60.0 1590 M45 1820 36 180 49 56 M52 M45 Enquire* 180 1930 1800 175000 Enquire 65.0 1930 Enquire 60.0 1750 2130 1820 65.0 1950 60.0 70.0 56 65.0 1820 M52 2020 44 200 56 57 M52 M52 Enquire* 200 2130 2000 19501800 Enquire 70.0 2130 Enquire 65.0 1950 2345 2020 70.0 2150 44 65.0 75.0 57 70.0 2020 M52 2230 44 48 220 57 62 M56 M52 Enquire* 220 *Bolt length will be calculated on a project by project basis. Note.- PN10 & available on request 2345 21502000 75.0 2345 70.0 2150 75.0 70.0 langes PN10 Flanges Table 18: 22: Fixed Flanges flanges PN10 PN Flanges Bolt Hole Details Bolt Hole Bolt Size Details Bolt Size Bolt Hole Details Bolt size D g DN DN a D D bg g PCD a a bno. b Dia PCD Dia No. Length (mm) Dia Dia Length (mm) 200 132 80 19.0 200.0 132 0 19.0 8.0 PCD 19 0 No. M Dia 8 Dia 65 Length 19 (mm) M 65 220 156 80 100 19.0 200 220.0 132 156 180 19.0 19.0.08.00 19 1808 M 19 8 M65 19 70 M 65 285 211100 150 19.0 235 285.0 156 211 2 19.0 19.0.08.0190 23 2 8 M20 23 8 M2070 23 75 M20 70 3 266150 200 20.0 300 3 17.0 211 266 295 20.0 20.0 17.08 17.00 23 295 8 M20 28 8 M2470 23 90 M20 70 0 319200 0 22.0 360 0 19.0 274 319 350 22.0 22.0 19.0 12 19.0310 23 350 12 M20 28 12 M2480 23 90 M20 80 455 3700 300 24.5 4 455 20.5 330 370 0 24.5 24.5 21.5 12 20.5370 23 0 12 M20 31 12 M2780 23 100 M20 80 505 429300 350 24.5 485 505 20.5 389 429 460 27.5 24.5 23.5 20.5430 23 460 M20 31 M2780 23 105 M20 80 565 480350 0 24.5 555 565 20.5 448 480 515 30.0 24.5 26.0 20.5490 28 515 M24 34 M3085 28 110 M24 85 615 5300 450.5 620 615 21.5 503 530 565 32.0.5 28.0 20 21.5550 28 565 M24 37 20 M3385 28 120 M24 85 670 582450 500 26.5 670 670 22.5 548 582 620 34.5 26.5 30.5 20 22.5600 28 620 M24 37 20 M3390 28 1 M24 90 780 6800 600 30.0 730 780.0 609 682 7 36.5 30.0 32.5 20.0660 31 7 20 M27 37 20 M33 100 31 130 M27 100 895 794600 700 32.5 845 895 27.5 720 794 8 42.0 32.5 37.0 24 27.5770 31 8 20 M27 24 M36 110 31 145 M27 110 1015 901700 800 35.0 960 1015 30.0 820 901 950 46.5 35.0 41.5 24 30.0 875 34 950 24 M30 43 24 M39 110 34 0 M30 110 1115 1001 800 900 37.5 1085 1115 32.5 928 1001 1050 51.0 37.5 46.0 28 32.5 990 34 1050 24 M30 49 28 M45 120 34 170 M30 120 1230 1112 900 1000.0 1185 1230 35.0 1028 1112 10 55.5.0 50.5 28 35.0 1090 37 10 28 M33 49 28 M45 130 37 180 M33 130 13 1218 1000 1100 42.5 1320 13 37.5 11 1218 1270 60.0 42.5 55.0 32 37.5 1210 37 1270 28 M33 56 32 M52 130 37 205 M33 130 1455 1328 1200 1200 45.0 1530 1455.0 1350 1328 1380 69.0 45.0 64.0 32.0 1420 1380 32 M36 56 32 M52 1 220 M36 1 75 10 1530 10 1755 46.0 75 1560 41.0 1530 74.0 1590 46.0 69.0 36 41.0 43 36 1590 62 M39 36 M56 150 Enquire* 43 M39 150 1915 00 1750 00 1975 49.0 1915 1780 44.0 1750 81.0 1820 49.0 76.0 1860 44.0 49 1820 62 M45 M56 0 Enquire* 49 M45 0 2115 1800 1950 1800 2195 52.0 2115 1985 47.0 1950 88.0 52.0 83.0 2070 47.0 44 70 M64 Enquire* 23 2000 2150 2000 24 55.0 23 2210 50.0 2150 95.0 55.0 90.0 2300 50.0 48 70 M64 Enquire* * Bolt length will be calculated on a project by project basis. Tables 21 & 22 provide additional information regarding fixed flange joint dimensions. 82 72 Saint-Gobain PAM UK supplies fixed flange joint sets with full face EPDM/Nitrile gasket and bolts (as per above lengths), nuts and two washers per bolt as standard. These joint sets are CESWI 7th edition compliant

Section 3: Joints DN80-600 DN80-600 a a c Adjustable Flanges Flanges Saint-Gobain Saint-Gobain PAM UK PAM are UK able are is able to offer to to offer adjustable adjustable flanges flanges on a on range on a range a range of fittings of fittings of in in in DN80-600. DN80-600. On a selected On a selected number number of flanged of flanged fittings fittings Saint-Gobain Saint-Gobain PAM UK PAM will UK provide will provide c adjustable adjustable flanges flanges as the as standard the standard product product range. range. Please Please refer to refer the to product the product range range section section for details. for details. g D g D Adjustable Adjustable flanges flanges have been have used been for used over for over years in years Europe. in Europe. Adjustable Adjustable flanges flanges facilitate facilitate flange flange assembly assembly by allowing by allowing the loose the flange loose flange to be rotated to be rotated and positioned and positioned to to align bolt align holes. bolt holes. Saint-Gobain Saint-Gobain PAM UK PAM can UK also can offer also an offer additional an additional range range of flange of flanged fittings fittings with adjustable with adjustable flanges, flanges, please please contact contact Technical Technical Sales department Sales department for further for further information, information, Tel: 0115 Tel: 930 01150650/0700. 930 0650/0700. The key The benefits key benefits offered offered by adjustable by adjustable flanges flanges are time are & time effort & effort saved saved on site, on site, particularly particularly above above ground ground or in pumping or pumping stations/treatment works. works. Adjustable Adjustable for easy for alignment easy alignment if flanges if flanges are off-set are off-set Able to Able quickly to quickly change change flange flange to higher/lower to higher/lower rating rating Joint sets Joint are sets available are available to order to for order use for with use adjustable with adjustable flanges, flanges, these sets these contain sets contain all all components components required required for adjustable for adjustable flanged flanged joints. joints. Metal Metal insert insert gasket gasket Mild steel Mild bolts, steel nuts bolts, and nuts washers and washers Note: Adjustable Note: Adjustable flanges flanges utilise utilise different different bolt lengths bolt lengths to fixed to flanges. fixed flanges. Please Please refer torefer to adjustable adjustable data sheet data for sheet bolt for lengths; bolt lengths; ref: PAMRF03. ref: PAMRF03. This is This available is available from from www.saint-gobain-pam.co.uk. ASSEMBLING JOINT WITH ADJUSTABLE FLANGES PN Adjustable Flange Bolt Washer Table 23: Adjustable Flanges dimensions DN Adjustable Flange Bolt size Bolt No. D g a b c Dia Length (mm) 80 200 132 23.0 20.0 3 4 85 100 220 156 23.0 20.0 3 8 90 150 285 211 26.0 23.0 3 8 20 100 200 3 266 29.0 26.0 3 12 20 100 0 0 319 32.0 29.0 3 12 24 110 300 455 370 36.0 32.0 4 12 24 130 350 520 429 39.0 35.0 4 24 130 0 580 480 42.0 38.0 4 27 150 450 6 527 45.0 41.0 4 20 27 130 500 715 582 48.0 44.0 4 20 30 0 600 8 682 55.0 50.0 5 20 33 180 74 83

Section 3: Joints Table 24: Adjustable flanges joint sets DN Adjustable Flanges WATER Product Code SEWER Kit reference (incl. gasket, bolts, nuts and washers Gasket Bolt and nut Washer 80 Saint-Gobain JBA80KV1 PAM UK are able to offer adjustable JBA80GW1 flanges on JXMBM85 a range of fittings JXMRQE in DN80-600 DN80-600. On a selected number of flanged fittings Saint-Gobain PAM UK will provide a c 100 JBB10KV1 JBB10GW1 JXMBM90 JXMRQE adjustable flanges as the standard product range. Please refer to the product range 150 section JBB15KV1 for details. JBB15GW1 JXM20BM100 JXM20RQE 200 JBB20KV2 JBB20GW1 JXM20BM100 JXM20RQE Adjustable flanges have been used for over years in Europe. Adjustable flanges 0 JBBKV2 JBBGW1 JXM24BM110 JXM24RQE facilitate flange assembly by allowing the loose flange to be rotated and positioned to 300 align bolt JBB30KV2 holes. Saint-Gobain PAM UK can JBB30GW1 also offer an additional JXM24BM130 range of flange JXM24RQE Gasket fittings Bolt with and adjustable nut flanges, Washer please contact Gasket Technical Sales Bolt and department nut for Washer further information, Tel: 0115 930 0650/0700. 350 JBB35GV1 JXM24BM130 JXM24RQE JXM24BM130 JXM24RQE g D 0 JBBGV1 The key JXM27BM150 benefits offered JXM27RQE by adjustable flanges are time & JXM27BM150 effort saved on site, JXM27RQE particularly above ground or in pumping Nitrile stations/treatment gasket works. 450 JBB45GV1 JXM27BM130 JXM27RQE JXM27BM130 JXM27RQE not available 500 JBB50GV1 Adjustable JXM30BM0 for easy alignment JXM30RQE if flanges are off-set JXM30BM0 JXM30RQE Able to quickly change flange to higher/lower rating 600 JBB60GV1 JXM33BM180 JXM33RQE JXM33BM180 JXM33RQE Joint sets are available to order for use with adjustable flanges, these sets contain all components required for adjustable flanged joints. Metal insert gasket Mild steel bolts, nuts and washers Note: Adjustable flanges utilise different bolt lengths to fixed flanges. Please refer to adjustable data sheet for bolt lengths; ref: PAMRF03. This is available from www.saint-gobain-pam.co.uk. 84 74

Section 4 Pipe Lining Pipe Lining 75 75 85

Section 4: Pipe Linings Pipe Linings Saint-Gobain PAM UK is highly experienced in providing high performance and fit-for-purpose linings for use with both potable water and sewage. All linings used by Saint-Gobain PAM UK conform to the requirements of the latest versions of BS EN 545 for use with potable water. Sewage linings conform to BS EN 598. The standard linings offered by Saint-Gobain PAM UK are suitable for virtually all water and sewer applications within the UK. However, Saint-Gobain PAM UK has access to a wide range of specific solutions to suit even the most demanding requirements. Table : Matrix of pipe linings offered by Saint Gobain PAM UK Product Dia Range Ductan System CL System XL HAC ph1 Table Range 21: Matrix of pipe linings offered by Saint-Gobain PAM UK OD75- Standard Blast Product Dia OD0 System (Blutop) System Furnace Range Range XL CL DN80- Standard Water Pipe Cement DN800 (Natural) UTI DN800 Standard Special DN900- Standard Request Water DN2000 (Classic) Pipe Special DN900 Uti DN800 Standard Request Sewerage Pipe UTI Sewerage Pipe DN900- DN800 DN2000 DN900 Directional Drill pipes DN100- PAM - Water & DN1000 Directional Sewer Standard for Standard potable for water Potable (PAM Direxional) Water Soft Water Standard (Natural) Special Request HAC Standard (Integral Plus or Integral) ph1 Special Request (Integral) Special Standard Special Standard Request Request (Integral) (Integral) Special Standard Request Standard for Standard sewerage for(pam Direxional) Sewerage Potable Water Water Pipes All Since ductile potable iron water pipes may for use prove with aggressive potable water for pipelines are approved due to its by mineral the Secretary composition of Stateor to for treatment use in public products, water ductile supplies iron under pipelines Regulation are lined 31 with of the an internal Water Supply coating. (Water Quality) Regulations 2000 and are listed in the List of Approved Products and All ductile iron pipes for use with potable water are approved by the Secretary of State Processes published by the DWI. for use in public water supplies under Regulation 31.4.a of the Water Supply (Water Quality) Regulations 2000, Regulation 27 of the Water Supply (Water Quality) (Scotland) The Regulations internal 2001 surfaces and of are all listed sizes in of the ductile List of iron Approved pipes used Products for the and conveyance Processes of published raw and by the potable DWI. water, are protected against corrosion by the use of cement mortar linings. Cement mortar linings create an alkaline environment at the metal surface of the pipe thereby producing conditions under which corrosion cannot take place. Cement mortar linings are applied in accordance with BS EN 545. 86 76

Standard Offer: Ductan: System XL: Potable water Water OD75-0 DN80-800 - Blutop range Traditionally, Saint-Gobain the PAM internal UK System lining XL for is ductile the standard iron pipes pipe has system been for cement diameters mortar. up For to the and Blutop including range, DN800. the cement The system mortar comprises replaced an epoxy by an innovative seal coat applied thermoplastic to cement coating called Ductan. mortar lining under factory conditions with tight control over process parameters. Main characteristics: Saint-Gobain 300μm thick PAM UK System XL controls both inorganic and organic leachates to exceptionally Perfectly adherent, low levels. with When an adhesion used in value accordance greater with than Saint-Gobain 8MPa (80kg/cm2) PAM UK the same as fusion bonded epoxy. DUCTAN withstands without damage: recommendations, System XL controls the ph within regulatory limits, for all waters, perforation under load hard and soft. The current Saint-Gobain PAM UK System XL Instructions for Use cuts on site document may be found on the website: www.saint-gobain-pam.co.uk Approved by the Secretary of State under Regulation 31.4.a of the Water Supply (Water Quality) Regulations 2000 Features and benefits of Saint-Gobain PAM UK System XL: Advantages: Perfectly Available smooth in diameters internal uti surface, DN800DUCTAN minimizes head losses Extra-light, Suitable for DUCTAN all water reduces types the pipe weight by % Thinner than the cement coating, DUCTAN increases the pipe s hydraulic cross-section. Exceptional ph controlled abrasion within resistance regulatory limits Anti-corrosion Residence times protection compatible for 100 with years normal commissioning and operating conditions In addition, Approved the by DUCTAN the Secretary lining of is State impact under resistant Regulation and therefore 31 of the does Water not Supply flake in (Water case of point Quality) impact. Regulations 2000 The Excellent Ductan lining Hydraulic covers Performance the inside of the pipe completely from the socket to the end of the spigot Socket Coating Cement mortar linings Socket areas which come into contact with potable water are coated with an approved Cement blue epoxy mortar paint. linings create an alkaline environment at the metal surface of the pipe thereby producing conditions under which corrosion cannot take place. Cement mortar linings System are applied CL: Potable in accordance Water with BS EN DN900-2000 545. Saint-Gobain PAM UK applies two types of cement mortar linings: System CL and System XL Saint-Gobain PAM UK System CL is the standard pipe system for diameters DN900-2000. Saint-Gobain PAM UK System CL comprises a cement mortar which fully 1) System CL : Potable Water DN80-2000, Natural range complies with BS EN 545 and is applied as a pipe lining under strict factory conditions. When used in accordance with Saint-Gobain PAM UK System CL Instructions for Use Saint-Gobain document, System PAM UK CL System gives excellent CL is the ph standard leachate pipe system performance diameters for hard DN80-2000. and soft System CL comprises blast furnace cement which fully complies with BS EN 545 and is waters, even with extended residence times. applied as a pipe lining under strict factory conditions. When Features used and in benefits accordance of Saint-Gobain with Saint-Gobain PAM UK PAM System UK System CL: CL Instructions for Use document, System CL gives excellent ph and leachate performance for hard and soft waters, even Available with extended in diameters residence DN900-2000 times. Features Suitable and for benefits all water of types Saint-Gobain PAM UK System CL: Available ph controlled in diameters within regulatory DN80-2000 limits ph controlled within regulatory limits Residence Residence times times compatible compatible with with normal normal commissioning commissioning and and operating operating conditions conditions Approved by the Secretary of State under Regulation 31.4.a of of the the Water Supply (Water Quality) Regulations 2000 2000 Excellent hydraulic performance Excellent hydraulic performance Socket areas which come into contact with potable water are coated with an approved blue epoxy paint. Socket Coating Socket areas which come into contact with water have a coating of approved bitumen paint. 77 87

Section Section 4: 4: Pipe 4: Pipe Pipe Linings Linings Special Special Special Sewerage Sewerage Sewerage Requirements Requirements Requirements DN900+ 2) System Linings XL: Potable Soft Water Water Solutions DN80-700, Natural range DN900+ Linings Soft Water Solutions Upon Saint-Gobain request PAM Saint-Gobain UK System PAM XL is UK the is also standard able pipe to supply system a seal for diameters coated cement up to mortar and lining Upon which is particularly suitable for use in soft water areas and/or where long DN900+ including request DN700. Saint-Gobain Linings The system PAM Soft comprises UK also Water an epoxy able to Solutions seal supply coat a applied seal coated to the cement mortar residence lining under which times factory is particularly in excess conditions of suitable those with defined for tight use control in the softover System water process areas CL Instructions parameters. and/or where for Saint-Gobain long Use document Upon residence PAM UK request System times are Saint-Gobain envisaged. XL excess controls of This both PAM those solution inorganic UK defined is also is approved and in able the organic to System supply for leachates use CL a in seal Instructions public coated to exceptionally water cement for supplies Use mortar low as Saint-Gobain lining levels. document which are is PAM envisaged. particularly UK Snowcrete. This suitable solution Please for use is contact approved in softthe water for Technical use areas in public and/or Service water where Department, supplies long as Tel: residence Saint-Gobain When 0115 used 930 times PAM 0650/0700 accordance in UK excess Snowcrete. for of with those more Saint-Gobain Please defined information. contact PAM the UK s System the Technical Instructions CL Instructions Service for Use, Department, for System Use XL document Tel: controls 0115 the 930 are ph 0650/0700 envisaged. within regulatory for This more solution limits. information. is approved for use in public water supplies as DN80-800 Saint-Gobain Features and PAM benefits Blast UK Snowcrete. of Furnace Saint-Gobain Please Cement PAM contact UK System the Technical XL: Service Department, Tel: 0115 930 0650/0700 for more information. Saint-Gobain DN80-800 Available in PAM diameters Blast UK can uti Furnace also DN700 offer blast Cement furnace cement in the diameter range DN80-800, Recommended this lining is the for soft same water as that areas Saint-Gobain PAM UK can also offer used blast for furnace PAM Directional. cement in the Blast diameter Furnace range Cement DN80- is DN80-800 Blast Furnace Cement approved ph controlled for use within in potable regulatory water limits 800, this lining is the same as thatapplications used for PAM by Directional. the Secretary Blast of Furnace State in accordance Cement is with Saint-Gobain Residence times Regulation PAM 31 UK compatible of the can Water also with offer normal Supply blast (Water furnace commissioning Quality) cement Regulations in and the operating diameter conditions approved for use in potable water applications by the Secretary of State 2000. in range accordance DN80-800, Approved this lining by is the the Secretary same as of that State used under for Regulation PAM Directional. 31.4.a Blast of the Furnace Water Supply Cement (Water with Regulation 31 of the Water Supply (Water Quality) Regulations 2000. is Quality) Regulations 2000 Instructions approved for use in for potable Use: water applications by the Secretary of State in accordance Excellent Hydraulic Performance with Regulation 31 of the Water Supply (Water Quality) Regulations 2000. The Instructions Socket Saint-Gobain areas which PAM for come UK Use: into instructions contact with for use potable documents water are for coated System with XL, an System approved CL blue and The Snowcrete are available to download from our website: www.saint-gobainpam.co.uk/alldownload.cfm and Snowcrete are available to download from our website: www.saint-gobain- Instructions epoxy Saint-Gobain paint. PAM UK instructions for use documents for System XL, System CL for Use: Note.- The pam.co.uk/alldownload.cfm Saint-Gobain PAM UK instructions for use documents for System XL, System CL The Saint-Gobain PAM UK instructions for use documents for System XL and System CL are and available Snowcrete on request. are available Please contact to download our Technical from our Sales website: Department www.saint-gobainpam.co.uk/alldownload.cfm on 0115 930 0700. Pipes Pipes High Alumina Cement Mortar Lining: Sewerage Pipes DN80-2000 High Alumina Cement Mortar Lining: Sewerage DN80-2000 High Alumina Cement Mortar Lining: Sewerage DN80-2000, Integral Range Saint-Gobain PAM UK supplies its standard sewer pipes with a high alumina cement mortar Saint-Gobain lining PAM to allow UK supplies for extreme its standard operating sewer conditions pipes with ranging a high from alumina ph 4 (highly cement acidic) mortar to lining ph 12 to (highly allow for alkaline). extreme High operating alumina conditions cement mortar ranging linings from ph conform 4 (highly to the requirements Saint-Gobain acidic) to ph 12 PAM of (highly BS UK EN supplies 598 alkaline). and its offer High standard high alumina abrasion sewer cement pipes resistance. with mortar a high linings alumina conform cement to the mortar requirements lining to of allow BS EN for 598 operating extreme and offer operating conditions high abrasion conditions ranging resistance. from ranging ph 4 from (highly ph acidic) 4 (highly Socket acidic) to ph 12 to (highly ph Coating 12 (highly alkaline). alkaline). High alumina High alumina cement mortar cementlinings mortar conform linings conform to the to the Socket requirements areas Coating of BS EN 598 and offer high abrasion resistance. which could come into contact with effluent receive a coating of red epoxy Socketpaint. areas which could come into contact with effluent receive a coating of red Coating epoxy paint. Benefits Socket areas of high which alumina could cement: come into contact with effluent receive a coating of red Benefits of high alumina cement: epoxy paint. Benefits Socket Resistance of high areas which to septic alumina could attack cement: Resistance to septic attack come into contact with effluent are coated with a epoxy paint. Benefits Resistance of high to septic attack Resistance to chemical alumina attack cement: Resistance to Resistance abrasion to chemical attack septic attack Resistance to abrasion Resistance to chemical attack Resistance to abrasion 88 78 78

Resistance Benefits to High Septic Alumina AttackCement Mortar Lining (Integral range) Resistance Benefits to High Septic Alumina AttackCement Mortar Lining (Integral range) Sewers are occasionally at risk from attack due to the septicity of effluents, particularly during Resistance periods of low to flow Septic or high temperature. Attack A two year test (see fig 1) to compare the resistance of High Alumina and other cements found that High Alumina cement Sewers are occasionally at risk from attack due to the septicity of effluents, particularly offers excellent resistance to septic attack. during periods of low flow or high temperature. A two year test (see fig 1) to compare the Fig: resistance 1 of High Alumina and other cements found that High Alumina cement offers excellent resistance to septic attack. Cold Water Cold Water Inlet Overflow Fig: 1 Cold Water Cold Air Water Cement Inlet + Overflow Iron H Cement 2 S Effluent Iron Air + H 2 S Water at 37 C Cement Water at 37 C Iron Cement Iron Effluent Resistance Resistance Type of Cement Water at 37 C Attack depth at water line Water at 37 C Blast Furnace 1.7mm to 2mm Portland A 1.9mm to 2.3mm Type of Cement Attack depth at water line Portland B 1.7mm Blast Furnace 1.7mm to 2mm Sulphate Resisting 4.4mm Portland A 1.9mm to 2.3mm High Alumina 0.6mm (surface layer only) Portland B 1.7mm Sulphate Resisting 4.4mm High Alumina 0.6mm (surface layer only) to Resistance Chemical to Attack Chemical Attack to Resistance Chemical to Attack Chemical Attack Sewers are at risk from attack by chemicals found in industrial discharges. Table 22 30 shows Resistance the resistance to of high Chemical alumina cement, Attack compared to ordinary Portland cement, against some common aggressive substances. Sewers are at risk from attack by chemicals found in industrial discharges. Table 22 30 26 shows the resistance of high alumina cement, compared to ordinary Portland cement, Table 30 22Resistance of High Alumina Cement Vs. Portland Cement against some common aggressive substances. Limitation of Resistance (mg/2) Table 30 22 26: Resistance of of High Alumina Cement Vs. vs. Portland Cement Effluent Aggressive Example Substance Portland High Alumina Limitation of Resistance (mg/2) Cement Cement Effluent Aggressive Chemical Example Condensate Substance Portland High Alumina Ammonia < 30 < 2000 Cement Cement Effluents Magnesium < 300 No limit Chemical Condensate Mine Waters Ammonia Sulphates < 30 < 0 < 2000 No limit Effluents Raw Waters Magnesium CO 2 < 300 < 20 No limit No limit Mine Waters Sulphates ph Range < 0 > 5.5 No limit 4 to 12 Raw Waters CO 2 < 20 No limit The chemical resistance of ph Saint-Gobain Range PAM UK Integral > 5.5 range under maximum 4 to 12 allowable concentrations at 20 C is given in table 31 23. The chemical resistance of Saint-Gobain PAM UK Integral range under maximum allowable concentrations at 20 C is given in table 31 27 23. 79 89

Section 4: Pipe Linings Table 23: 27: Chemical Resistance Alcohols Chemical Pipe Linings Fittings Gasket Nitrile Ethanol 50% No limit No limit Methanol 50% No limit No limit Glycol No limit No limit No limit Aliphatic Hydrocarbons White Spirit No limit No limit No limit Petrol, Diesel, Gas, Oil No limit No limit No limit Kerosene No limit No limit No limit Aromatic Hydrocarbons Xylene Toluene No limit No limit No limit Benzene, Styrene, Naphtha No limit No limit Not suitable Oils Lubricants, Petrol, Derivatives No limit No limit No limit Organic No limit No limit No limit Detergents Teepol No limit No limit No limit Water Soft Water No limit No limit No limit Saline Solution No limit 10% No limit Distilled Water No limit No limit No limit Chlorinated Water No limit No limit No limit Chlorinated Solution Trichloroethylene No limit 10% Not suitable Chloroform No limit 10% Not suitable Genklene No limit 10% Not suitable Acids Actic ppm ppm No limit Chromic 10 ppm 10 ppm No limit Citric 20 ppm 20 ppm No limit Hydrochloric 3 ppm 3 ppm No limit Lactic 15 ppm 15 ppm No limit Nitric 6 ppm 6 ppm No limit Oxalic 12 ppm 12 ppm No limit Phosphoric 10 ppm 10 ppm No limit Sulphuric 10 ppm 10 ppm No limit Tannic 200 ppm 10% No limit Tartaric 50 ppm 50 ppm No limit Bases Ammonia 18% % No limit Aniline No limit No limit No limit Dimethylamine 0.6% No limit No limit Phenol/Cresol No limit No limit No limit Potassium Hydroxide 560 ppm 500 ppm No limit Pyridine No limit No limit No limit Quinoline No limit No limit No limit Sodium Hydroxide 0 ppm 0 ppm No limit Trimethylamine No limit No limit No limit Salts Sodium Chloride % 10% No limit Potassium Chloride % 10% No limit Ammonium Sulphate 5% 10% No limit 90 80 Please consult us regarding the suitability of Integral for conveyance of other industrial effluents.

Resistance to Resistance Abrasion to Abrasion Abrasion is the degradation of the internal lining of the pipe due to the impact of solid particles contained in the effluent. It is likely to be a problem in the following instances: a) Combined sewers conveying surface waters, where there is likely to be a high concentration of solids. b)steep slopes, leading to high effluent velocity. c) Industrial effluent, where a high concentration of solid particles is envisaged. High alumina cement lining used by Saint-Gobain PAM UK offers excellent resistance to abrasion. The lining allows regular maximum flow rates of 7m/s with minimal abrasive attack in each of the applications. Resistance The effect of abrasion can be calculated from the formula: U=K x V 3 N 1 /2 10-4 U= Wear in mm per annum K= The coefficient characteristic of the material (the lower the value, the greater the resistance to abrasion) V= Flow rate m/s N= Characteristic of particle abrasiveness (according to the Miller Index ) Sewers are occasionally at risk from attack due to the septicity of effluents, particularly Table during 24 28periods demonstrates of low flow the superior high temperature. abrasion resistance A two year of High test Alumina (see fig 1) cement to compare in comparison the resistance with of High mostalumina other common and other sewer cements pipeline found materials. that High As greater Alumina effluent cement velocities offers excellent can be resistance permitted, to savings septic attack. the design stage can be achieved by avoiding manhole backdrops or flow control chambers on steep inclines. Fig: 1 Cold Water Cold 24Water Table 28 Abrasion resistance of High Alumina Cement vs. Other materials Inlet Overflow to Septic Attack Abrasive K value Air Basalt/Polyurethane + 5 to 15 H Cement 2 S Iron High alumina cement/natural rubber 15 to 30 Water at 37 C Water at 37 C Unlined iron 30 to 50 Cement Iron Effluent Blast furnace cement/concrete/pic 50 to 100 Type of Cement Attack depth at water line GR Blast Furnace 1.7mm to 2mm 300 Portland A 1.9mm to 2.3mm Asbestos Portland cement B 1.7mm > 1000 Sulphate Resisting 4.4mm The lower High the Alumina K value, the greater the 0.6mm resistance (surface to abrasion. layer only) Resistance Special to requirements Special Chemical requirements: Attack For Sewers effluents are at<ph4 risk from or >ph12 attack Saint-Gobain by chemicals PAM found UK in plc industrial offers a ph1 discharges. pipe-system. Table 22 For information shows Intergral the resistance please ph1contact of high Technical alumina Sales cement, Department, compared Tel: to ordinary 0115 930 Portland 0650/0700. cement, against For effluents some <ph4 common or >ph12 aggressive Saint-Gobain substances. PAM UK plc offers a ph1 pipe-system. For information please contact Technical Sales Department, Tel: 0115 930 0700. Table 22 Effluent Example Aggressive Substance Limitation of Resistance (mg/2) Portland Cement High Alumina Cement Chemical Condensate Ammonia < 30 < 2000 Effluents Magnesium < 300 No limit Mine Waters Sulphates < 0 No limit 81 91

Section 4: Pipe Linings Lining Thickness & Condition: Water & Sewerage pipe linings Thickness Lining thicknesses for pipes are in accordance with the latest version of BS EN 545/BS EN 598. The standard allows for the lining thickness to taper down at the end of pipes and fittings. Please refer to BS EN 545/BS EN 598 for lining thicknesses. Lining Condition The surface of the lining will be substantially smooth but may occasionally contain longitudinal and circumferential shrinkage cracks which do not affect the stability of the lining. The widths of the cracks and any radial displacement at the cracks will not exceed the values given in BS EN 545/BS EN 598. These shrinkage cracks are permissible under the relevant product standards and close on continuous exposure to water - a process known as autogenous healing. Jointing surfaces i.e the inside of sockets and flange faces are free from cement mortar. Installation Instructions For guidance on testing and commissioning of pipelines, lining repair, installation guidance and storage instructions please download the Installation Guide from our website, www.saint-gobain-pam.co.uk. 92 82

Section 5 Pipe Coating Pipe Coating 83 83 93

Section 5: Pipe Coatings External Coatings Saint-Gobain PAM UK offers a range of of proven external coatings to to suit suit all all types of of ground conditions. The standard coating is is Zinalium, Saint-Gobain Saint-Gobain PAM UK PAM zinc UK s and zinc aluminium and aluminium alloy system. alloy First system. launched First with launched PAM Natural with PAM Water Natural pipe. Water This pipe. coating This is coating now available is now available on PAM Integral Plus sewer pipe and on Blutop water pipe as standard. on PAM Integral Plus DN80-800 sewer pipe as standard. For extreme soil conditions a wide variety of special coating systems can be offered. To ensure the most cost effective and appropriate solution is supplied, Saint-Gobain PAM UK offers soil resistivity surveys, please see Table page 10. Table 29: Matrix of coating available from Table Saint-Gobain : Matrix of PAM coatings UK. available from Saint-Gobain PAM UK. Product Range Zinalium Dia (Zinc/ & Dia Range RangeAluminium) Aluminium + Epoxy Zinc Zinc & & Bitumen Bitumen Zinc Zinc & & Epoxy Epoxy Tape Wrap PE Tape Wrap Tape Wrap mm or ZM-U Sleeving % 55% 55mm PE (Polyethylene) ZM-U PUX (Polyurethane) TT Water Pipe OD75 - UTI DN800 OD0 DN900- DN80 2000 - DN600 Standard Standard (Blutop) Standard (Natural) Standard Special Special Special Request request Request Special Special RequestSpecial Request request Special Request Special Special request Request (TT range) Sewerage Pipe UTI DN800 DN700 DN900-2000 Standard Standard (Natural) Optional Special Request Special Special Special Standard request* request Request Special Request Special Request Special Request Special request (TT range) Special Request Directional Drill Water Pipes Pipe DN800 Standard (Natural) Optional Special request* Special request Standard Special request (TT range) DN900- DN1000 Optional Standard (Classic) - Black Special request* Special request Special request (TT range) DN900- DN2000 Standard (Classic) - Black Special request Special request Special request (TT range) Uti DN800 Standard (Integral Plus) Standard (Integral) Special request * Special request Special request uti DN700 only (TT range) Sewerage Pipe DN900- DN2000 Standard (Integral) Special request Special request Special request DN800-2000 (TT range) Directional Drill pipes - Water & Sewer DN100- DN700 Standard (PAM Direxional) 94 84 * Potentially required if Zinalium is not used

Table 26: 30: Shows the Recommended Protection System Ground Conditions Soil Environment Blutop (OD 75-0) Natural (DN 80 800) Zinc and Bitumen (DN 900 2000) Integral Plus (DN 80 800) Integral (DN 80-2000) Tape Soil Tape Moisture PE Sleeving TT Wrap Wrap PE + Imp. Bed Coating Not mm subject to 55% Sleeving Subject to & Surround waterlogging Overlap Overlap waterlogging Natural soils with resistivity above Soils with resistivity above 00 R ohm.cm R R A R a a a1 or 4 a a 00 ohm/cm Natural soils with resistivity between 1500-00 Natural Soils ohm cm with without resistivity water between R 1500 and R 00 ohm.cm R A R a 1 a or 4 a a2 or 4 a table Natural soils with resistivity between 1500-00 Natural Soils ohm cm with with resistivity seasonal between 750 and 1500 ohm.cm 2 or 4 3, 4 or 5 R R R a a a A a water table or permanent waterloggging Natural Soils with resistivity below 750 ohm.cm 3 or 5 Natural soils with resistivity between 500-1500 ohm cm without water R R R a a a A a table Natural Soils containing coal, shale, ironstone or peat 3 or 5 Natural soils containing coal, ironstone or peat R A a A Natural soils Soils with with resistivity ph below 5 3 or 5 5 R A a A 500 ohm-cm Natural soils with resistivity between 500 Made and Ground 1500 ohm with cm with light chemical contamination (e.g. farmyards, refuse sites) 3 or 5 5 R R R R A a A seasonal water table or permanent waterloggging Ground subject to levels of stray currents likely to cause long term damage to pipes* Made up ground with light chemical 5 contamination. e.g. Refuse sites. R A a A Farmyard Made ground waste without containing water table clinker, flints, bricks or other materials likely to cause Made mechanical up ground damage with light chemical 6 contamination. e.g. Refuse sites. R A a Farmyard Made Ground waste with with water heavy tablechemical contamination (e.g. disused gas plants, industrial Stray sites, electrical mines, currents. chemical e.g. plants), Crossing and tidal waters (e.g. estuaries, shorelines) 6 cathodically protected pipelines and R A a DC traction systems * The magnitude of any effects due to stray currents may be determined by a soil resistivity and soil potential survey. In cases of Stray doubt, electrical the recommendation currents. e.g. Parallel is as shown. to cathodically protected pipelines A A a R and DC traction systems Natural Ref soils Protection with a ph< 5 without Systems R A a Availability A water table Natural soils with a ph< 5 with water R A a table 1 or permanent Classic water-logging (zinc plus bitumen) or Integral (zinc plus epoxy) DN 80-2000 Made up ground with flints, clinker etc material likely to cause mechanical 2 damage Classic/Integral with or without plus polyethylene sleeving R A DN 80-2000 A water table Made up ground with solid chemical contamination. 3 Classic/Integral Ex-industrial or plus polyethylene sleeving with bed and surround R A DN 80-2000 A chemical sites Made up ground with liquid chemical contamination. 4 Natural Ex-industrial or Integral-Plus or (zinc/aluminium plus epoxy) R A DN 80-800 chemical sites Tidal waters. E.g. estuarine conditions R A 5 TT (Heavy Duty Polyethylene; Polyurethane or mm overlap Tape Wrap Coating) DN 80-2000 A = Alternative recommended R = Recommended coating a = technically acceptable (but not recommended) coating option coating option 6 TT (Heavy Duty Polyethylene; Polyurethane or 55% overlap Tape Wrap Coating) DN 80-2000 85 95

Section 5: Pipe Coatings Epoxy Coating PAM Natural/Integral Blutop, and Plus Integral Plus Ductile Iron Zinc/ aluminium Coating Cement Mortar Lining Exceptional The exceptional Protection protection of Zinalium Saint-Gobain PAM UK supplies zinc/aluminum coating for all pipes DN60-800 as Saint-Gobain PAM UK supplies a zinc/aluminum coating (Zinalium) for all water and sewer standard. pipes uti DN800 The development as standard. of The this development coating is an of example this coating of Saint-Gobain is an example PAM of Saint-Gobain UK s continual PAM UK s research continual and research development and development programme. programme. Branded as Pam Natural (Water) and PAM Integral Plus (Sewer), this coating is a revolutionary and evolutionary pipeline product. Branded The as Pam coating Natural utilises (Water) an 85% and zinc PAM / Integral 15% aluminium Plus (Sewer) alloy and which later increases extended the to the new Blutop range, this coating is a revolutionary and evolutionary pipeline product. longevity of both the active and barrier protection for the pipe. This alloy, coupled with an The epoxy coating topcoat utilises (Blue an 85% for Pam zinc Natural / 15% aluminium and Red for alloy PAM which Integral increases Plus), the gives longevity PAM of Natural/Integral both the active Plus and significant barrier protection benefits for compared the pipe. to This previously alloy, coupled available with coating an epoxy systems. topcoat (Blue for Pam Blutop & Natural and Red for PAM Integral Plus), gives significant benefits compared to previously available coating systems. Ease and speed of pipe laying Risk elimination Extended Advantages: service life Reduced stock levels Ease Robustness and Speed of Pipe Laying The PAM Blutop, Natural and Integral Plus system provides a complete protection Reduced on site work system in nearly all natural soil conditions and eliminates the need for PE-sleeving and the associated time consuming installation. Consequently, the time to install pipes Ease will and reduce Speed significantly. of Pipe Laying The Risk PAM Elimination Natural and PAM Integral Plus system provides a complete protection system in The nearly risk of all specifying natural soil an conditions inappropriate and protective eliminates system the need is virtually for PE-sleeving eliminated and as the tests have associated shown that time PAM consuming Blutop/Natural/Integral installation. Consequently, Plus is suitable the for use time in to more install than pipes 90% will of UK soil reduce conditions significantly and is insensitive whenever to PAM soil variations Natural or over PAM short Integral distances. Plus systems are employed. Extended Service Life Risk The use Elimination of an external coating consisting of a zinc/aluminium alloy extends the longevity The of ductile risk of iron specifying pipes. Increasing an inappropriate the weight protective of Zinc system does not is virtually give the same eliminated degree as of tests improvement, nor does it extend the range of soils for which the pipe is suitable. A have shown that PAM Natural/Integral Plus is suitable for use in 90% of UK soil performance study of the PAM Natural system in comparison to enhanced zinc systems, conditions Technical Reference and is insensitive Document, to soil SGP-Ref: variations TP1H/TRD/0303/March over short distances. 2003 is available on request. Extended Service Life Reduced Stock Levels The With use one of coating an external type coating covering consisting the vast majority of a zinc/aluminium of UK soil conditions, alloy extends stock may the be longevity reduced both of ductile at the iron end pipes. customer, Increasing and throughout the weight the of supply Zinc does chain. not give the same degree of improvement, nor does it extend the range of soils for which the pipe is Robustness suitable. The PAM A Blutop/Natural/Integral performance study of the Plus PAM system Natural has been system tested in comparison under real life to enhanced conditions and zinc has systems, been shown Technical to withstand Reference the Document, extremes of SGP-Ref: handling, TP1H/TRD/0303/March transportation and laying 2003 without is available compromising to view the on protective the website: coating. www.saint-gobain-pam.co.uk. Reduced Work On-site With the elimination Stock of Levels the need to apply polyethylene sleeving to PAM Blutop/Natural/ With Integral one Plus coating pipes type and covering the reduction the vast in pre-jointing majority of UK preparation, soil conditions, installation stock times may be with reduced PAM pipes both are at reduced, the end thus customer, increasing and throughout productivity the and supply reducing chain. consequential delay. Robustness The PAM Natural/Integral Plus system has been tested under real life conditions and has been shown to withstand the extremes of handling, transportation and laying without compromising the protective coating. Reduced Work On-site With the elimination of the need to apply polyethylene sleeving to PAM Natural/Integral Plus pipes and the reduction in pre-jointing preparation, installation times with PAM Natural/Integral Plus pipes are reduced, thus increasing productivity and reducing consequential delay. 96 86

Section 4: Pipe Linings High performance epoxy coating > 100μm Metallic zinc/aluminium coating ( 0g/m 2 ) Epoxy socket coating (>μm) Cement mortar lining (System XL water/hac Sewer) Ductile Iron Zinc/ Lining Thickness Potable Water Pipe Sewerage Pipe Zinc/ Zinc/Aluminium Alloy Alloy & Condition: Water & Sewerage pipe linings How years it works: of Research Thickness and Development The coating utilises an 85% zinc/15% aluminium alloy which gives increased longevity of Lining the active thicknesses corrosion for pipes protection are in layer. accordance with the latest version of BS Launch EN 545/BS of the BLUTOP range EN 598. The standard allows for the lining thickness to taper down at the end of pipes Zinc ions within the alloy provide sacrificial Complete and fittings. Please refer to BS EN 545/BS galvanic protection to areas which may characterization EN 598 for lining thicknesses. Launch have been damaged during the transportation, of the zinc-aluminium handling of the or NATURAL installation range of the pipe. alloys in the DN 60 to 300 Discovery Once Lining the pipe Condition has been installed and is in contact with the surrounding soil the zincaluminum - aluminium) alloy provides a long in-the-field term tests barrier through of the alloy DUNOY Initial results from Extension of the (zinc Decision the to launch formation NATURAL of a range stable to the a new product using insoluble The surface protective of the lining layer. will be substantially smooth but may occasionally DN 350 to 600 Lab testing the zinc-aluminium contain coating longitudinal and Initial circumferential in-the-field tests shrinkage cracks which do not affect the stability of Although the lining. a The coating widths of pure of the zinc cracks provides and any galvanic radial protection displacement for the at the ductile cracks pipe, will it not 1969-1970/72-1971/72-1978 - 1982/1998-1998 - 2000-2005 - 2009 is 100% exceed active, the values and its given effect in BS can EN be 545/BS rapidly EN depleted. 598. These Similarly, shrinkage although cracks zinc are provides a protective permissible layer under when the it relevant transforms product into standards a dense, impermeable and close on layer continuous of zinc exposure salts, these to salts water Using can - a only process zinic form known aluminium under as specific autogenous conditions. alloys healing. instead Jointing surfaces of zinc i.e the means: inside of sockets and flange faces are free from cement mortar. If zinc A Galvanic transforms protection too quickly offered the by resulting zinc passive layer is of poor quality. The presence Installation An Imporoved of aluminum chemical Instructions slows and this mechanical conversion, stability by considerably decreasing the rate at which For of guidance the the coating zinc on is testing thanks transformed; and to the commissioning use and of creating aluminium a of more pipelines, stable lining protective repair, layer installation compared to zinc guidance alone, and whilst storage allowing instructions the sacrificial please galvanic download healing the Installation process to Guide take place. from our website, www.saint-gobain-pam.co.uk. The dual structure (islands of zinc within the aluminium skeleton) of the alloy used on The protective layers stick to the PAM Natural/Integral Plus means the duration of active ductile protection iron pipe perfectly, increases covering the entire barrel and socket. significantly. The scientific explanation Zinalium offers an active protection to ductile iron pipes, thanks to the power of galvanic protection offered by the alloy ZnAL 85-15. Zinc ions within the alloy provide sacrificial galvanic protection to areas which may have been damaged during the transportation, handling or installation of the pipe. Aluminium Alloy Blue epoxy (pore-sealer) ZnAI alloy Once the pipe has been installed and is in contact with the surrounding soil the zinc/ aluminum How italloy works: provides a long term barrier through the formation of a stable insoluble protective layer. The coating utilises an 85% zinc/15% aluminium alloy which gives increased longevity Although of the active a coating corrosion of pure protection zinc provides layer. galvanic protection for the ductile pipe, it is 100% active, and its effect can be rapidly depleted. Similarly, although zinc provides a protective layer Zinc when ions within transforms the alloy into provide a dense, sacrificial impermeable galvanic layer protection of zinc salts, to areas these which salts may can only form have under been damaged specific conditions. during the transportation, handling or installation of the pipe. If Once zinc transforms the pipe has too been quickly installed the resulting and is in passive contactlayer with is the of poor surrounding quality. The soil presence the zinc- of aluminum alloy slows provides this conversion, a long term by considerably barrier through decreasing the formation the rate of at a stable which the zinc is insoluble transformed protective and creates layer. a more stable protective layer compared to zinc alone, whilst allowing the sacrificial galvanic healing process to take place. The Although dual structure a coating (islands of pure zinc of zinc provides within galvanic the aluminium protection skeleton) for the ductile of the alloy pipe, used it is on PAM 100% Blutop/Natural/Integral active, and its effect can Plus be rapidly means depleted. the duration Similarly, of active although protection zinc provides increases a significantly. protective layer when it transforms into a dense, impermeable layer of zinc salts, these salts can only form under specific conditions. Ductile Iron High performance epoxy coating > 100μm Metallic zinc/aluminium coating ( 0g/m 2 ) Epoxy socket coating (>μm) Cement mortar lining (System XL water/hac Sewer) Ductile Iron If zinc transforms too quickly the resulting passive layer is of poor quality. The The presence quantity of aluminum of slows alloy this applied conversion, by considerably decreasing the rate at which the zinc is transformed; and creating a more stable protective layer compared to Increasing the thickness of the alloy over the minimum specified standard (EN 545 or zinc alone, whilst allowing the sacrificial galvanic healing process to take place. EN 598) results in exponential increase in the longevity of the coating, offering greater protection in a wider range of soils. The dual structure (islands of zinc within the aluminium skeleton) of the alloy used on PAM Natural/Integral Plus means the duration of active protection increases significantly. 82 87 97

Section 5: Pipe Coatings Why The quantity not apply of greater alloy applied thickness of zinc? Increasing Saint-Gobain the PAM weight has of increased zinc does the not quantity significantly of metallic extend coating the lifetime from 200g/m when 2 exposed (minimum to specified an aggressive by standard environment. EN 545 and The EN extra 598) zinc to 0g/m is rapidly 2 of consumed zinc aluminium by auto-corrosion alloy which results and in exponential does not produce increase the in stable the longevity conversion of the layer coating, that is offering needed greater for long protection term in a wider durability. range of soils. Fig 2 shows how the protection given to ductile iron by zinc rapidly ceases in aggressive environments. The very significant increase in the thickness of the coating means: Fig 2 Improved formation Protection of long-term of samples protective exposed in aggressive layers seawater environment Improved 0.00 performance of galvanic protection provided by the zinic aluminium alloy 200.00 as Zinalium? 0.00 Mixed potential mv: SCE 800.00 KEY Greater mechanical resistance of the protective layer Zinc A Zinc B Will increasing the thickness of zinc have the same effect ZnAI A ZnAI B Zn + SC A Zn + SC B Increasing the weight of zinc does not significantly extend the lifetime when exposed to an aggressive 600.00 environment. The extra zinc is rapidly consumed by auto-corrosion and does not produce the stable conversion layer that is needed for long term durability. Fig 2 shows how the protection given to ductile iron by zinc rapidly ceases in aggressive environments. 1000.00 1200.00 0 100 200 300 0 500 600 700 800 900 KEY A negative potential of more than 750 mv (with respect to a saturated calomel electrode) is required to prevent corrosion of the ductile iron. This graph shows how that potential changes after about 450 days for the zinc coatings but remains constant for the zinc/aluminium coating. A negative potential of more than 750 mv (with respect to a saturated calomel electrode) is required to prevent corrosion of the ductile iron. This graph shows how that potential changes after about 450 days for the zinc coatings but remains constant for the zinc/aluminium coating. Epoxy Topcoat The role of the epoxy layer Test duration in days Pam Natural/Integral Plus is finished with a tough, porous epoxy coating. This epoxy coating is applied at an optimum thickness to provide durability and robustness to the coating With ZINALIUM, but also allow the conventional the galvanic black action pore-sealer of the zinc is to replaced continue: by blue epoxy coating (signal blue for the Natural range and ultramarine for the Blutop range) or by red epoxy coating Able to (for cope the with Integral real-life Plus range). situations i.e. transportation and handling This Severe tough impact porous and epoxy drop coating tests fails is applied to crack at the an optimum epoxy seal thickness (WRc Ref, to UC provide 3841) durability and robustness to the coating but also allow the galvanic action of the zinc to continue. Scrape tests fail to expose bare metal The main Improvements provided by the epoxy includes: Greater Controlled chemical porosity stability allows the zinc s galvanic action to take place Better long-term performance in soil as it ages Better control of the zinc-aluminium alloy conversion process (controlled porosity allows the zinc s galvanic action to take place) Better mechanical resistance of the coating (during transport and use), scrape tests fail to expose bare metal Improved resistance to solvents present in the soil (contaminated soil) Possibility of colouring the pipe to enable easier identification Better organoleptic (taste/odour) performance Severe impact and drop tests fails to crack the epoxy seal (WRc Ref, UC 3841) 98 88

Section 5: Pipe Coatings Supplementary Zinc Coated: Deposit of zinc transformation product healing the damaged area. Zn2+ Permeable Seal Coat Deposit of Zinc corrosion product Zinc + Current i Metallic Zinc Coating Ductile Iron Coating Systems: Why Introduction not apply greater thickness of zinc? Saint-Gobain Increasing the PAM weight UK offers zinc does range not of significantly external coating extend systems the lifetime to suitwhen different exposed Saint-Gobain PAM UK offers a range of external coating systems to suit different ground ground to conditions. an aggressive conditions. PAM environment. Blutop PAM (OD Natural/Integral 75-0), The extra Natural Plus zinc (DN80-800) is pipe rapidly is the consumed and standard Integral by pipeline Plus auto-corrosion (DN80-800) product pipe from and is the does Saint-Gobain standard not produce pipeline PAM the UK product stable in the from conversion diameter Saint-Gobain range layer that DN60-800 PAM is and needed can and for be can used long be used in term the inmajority of the durability. soil majority conditions Fig of 2 found soil shows conditions in how the U.K. the found protection in the given U.K. For to diameters ductile iron greater by zinc than rapidly DN800 ceases Saint-Gobain aggressive environments. PAM UK offers a coating system of zinc plus a top coat. For water (PAM Large DN Water Pipes) the top coat is bitumen, and for waste water and sewage (PAM Integral), red epoxy is applied. Zinc Fig 2 + a Topcoat Protection of samples exposed in aggressive seawater environment 0.00 For diameters greater than DN800 Saint-Gobain PAM UK offers a coating system of zinc plus a top coat. For water KEY (PAM Classic) the Zinc top A coat is bitumen and for waste water and sewage (PAM Zinc B 200.00 Integral), red epoxy is applied. ZnAI A Zinc coating is an active protection, ZnAI due B to the galvanic action of the zinc/iron. 0.00 Zn + SC A Zinc The and Zinc a and top top coat coat works works in two in two ways: Zn ways: + SC B Formation If the 600.00 zinc of coating a stable is damaged protective during layer transport and laying, the zinc metal adjacent Under to the the damage top coating, site cathodically the zinc is transformed protects the into exposed a passive iron barrier until a protection healing layer layer, of which adheres tightly to the iron surface. zinc 800.00 transformation products forms over the damage site Damage Under the self-healing top coating, the zinc is transformed into a passive barrier protection layer, If the zinc coating is damaged during transport and laying, the zinc metal adjacent which 1000.00 adheres tightly to the iron surface to the damage site cathodically protects the exposed iron until a healing layer of zinc transformation products forms over the damage site. 1200.00 0 100 200 300 0 500 600 700 800 900 a Topcoat Mixed potential mv: SCE 200g/m 2 Zinc + Bitumen: Large Diameter Water Pipes DN900-2000 Test duration in days Zinc corrosion KEY products In the Pore-sealer diameter range Metallic DN900-2000 zinc Pipe Saint-Gobain wall PAM UK offers a ductile iron pipe A negative potential of more than externally coated with 200g/m 2 750 mv (with respect to a saturated calomel zinc plus bitumen topcoat Zn++. This ions allows a Current high degree i electrode) is required to prevent corrosion of the ductile iron. This graph shows how of protection against the majority of soil conditions. This protection system conforms that potential changes after about 450 days for the zinc coatings but remains constant to the latest version of BS EN 545. for the zinc/aluminium coating. 200g/m 2 Damage Zinc + Red Epoxy: PAM Integral DN80-2000 Stable protective layer Damage self-healing Epoxy Topcoat PAM Integral pipes are supplied with a 200g/m 2 zinc coating and finished with a tough red epoxy layer applied in accordance with BS EN 598. The PAM Integral coating Pam Natural/Integral Plus is finished with a tough, porous epoxy coating. This epoxy provides a high degree of protection in most soil conditions. coating is applied at an optimum thickness to provide durability and robustness to the coating 200g/m but also 2 Zinc allow + the Bitumen: galvanic action Large of the zinc Diameter to continue: Water Pipes DN900-2000 In specific Able to cope conditions with real-life where Saint-Gobain s situations i.e. standard transportation offer is and nothandling suitable, the use of PE sleeving may be appropriate. In Severe the diameter impactrange and drop DN900-2000 tests fails Saint-Gobain to crack the PAM epoxy UK seal offers (WRc a ductile Ref, UC iron 3841) pipe externally coated with 200g/m 2 zinc plus bitumen topcoat. This allows a high degree of protection against Scrape the tests majority fail to of expose soil conditions. bare metal This protection system conforms to the latest version of Controlled BS EN 545. porosity allows the zinc s galvanic action to take place 200g/m 2 Zinc + Red Epoxy: PAM Integral DN80-2000 PAM Integral pipes are supplied with a 200g/m 2 zinc coating and finished with a tough red epoxy layer applied in accordance with BS EN 598. The PAM Integral coating provides a high degree of protection in most soil conditions. In specific conditions where Saint-Gobain s standard offer is not suitable, the use of PE sleeving may be appropriate. Iron 88 89 99

Section 5: Pipe Coatings Special Zinc + Zinc + Extruded PE polyethylene coating - PEC coating Sprayed PU polyurethane coating - PUX coating Applications: In certain soils and under specific conditions, PAM Blutop/Natural/Integral Plus and Plus PAM and Large PAM DN Classic/Integral, Water Pipe/Integral, may not may offer not sufficient offer sufficient protection. protection. For these For instances, these instances, Saint-Gobain Saint- PAM Gobain UK can offer PAM various UK can alternative offer various protection alternative systems. protection See table systems. 30 detailing See table types 26 detailing of soil types conditions of soil and conditions the appropriate and the recommended appropriate recommended protection system. protection system. PE ZM-U Sleeving How Sleeving Works: For trenchless installations Saint-Gobain PAM UK can offer PAM Directional, a ductile iron pipe specifically designed for trenchless installation. PAM Directional has a coating The principal function of the polyethylene sleeving is to separate the pipe from contact which is able to cope with the rigors of trenchless installations. 200mg/m with the soil environment thus preventing non-uniform contact with the soil 2 of Zinc + solids. ZM-U is applied to Pam Directional pipes to ensure protection from potentially The system is therefore relatively insensitive to minor handling damage and the damaging conditions. ZM-U provides protection against damage to pipes being pulled presence of ground water inside the sleeving. Where major damage to the sleeving is through rocky conditions and performs in the most extreme conditions. caused however, repairs must be carried out before laying. PAM Directional is available in diameter range DN100-700. Application of PE sleeving How ZM-U works: Polyethylene sleeving may be obtained from Saint-Gobain PAM UK for application on site. Polyethylene sleeving can be fitted on site and no special equipment is needed ZM-U is a fibre cement coating applied on top of 200mg/m other than that necessary to lift the pipes and fittings. 2 of zinc. The tough nature of the ZM-U coating means that there are no special handling requirements. ZM-U provides a total barrier between the pipe and the surrounding ground conditions Details on the size of sleeving required for each pipe diameter with the weight and eliminating any risk of corrosion. The coating provides an extremely robust protection approximate length of sleeving per standard roll can be found in the Installation system and no further protection is required. Guide, www.saint-gobain-pam.co.uk Tape TT (PEC Wrap and PUX Coating) In Saint-Gobain highly aggressive PAM UK soil is also conditions able to Saint-Gobain supply an external PAM UK protective would normally systems called recommend TT Tape Wrapping the (Total use Terrain). of Tape The Wrap TT (either external % coating or 55mm system overlap). comprises However, thick organic Saint-Gobain coatings. PAM (Extruded UK is In also polyethylene highly able aggressive to supply PEC DN80-700 an soils alternative a more & sprayed robust external polyurethane type protective of protection PUX systems DN800-2000). may called be necessary. TT. The TT Saint- external Gobain coating PAM system UK comprises able to supply thick organic pipes wrapped coatings. with (Extruded heavy polyethylene duty self-adhesive PE DN60-700 tape throughout & sprayed polyethylene the diameter PUX range. DN800-2000). The tape consists of a combined anti-corrosion mastic and How pressure TT works: sensitive adhesive, laminated to a flexible PVC backing. How The TT external TT works: coating system uses thick organic coatings. These coatings provide a How complete Tape barrier Wrap between Works: the pipe and the surrounding soil. The TT coating system is The TT external coating system uses thick organic coatings. These coatings provide a The complete suitable tape for exhibits barrier use in between highly resistance aggressive the pipe to and soils. bacterial the surrounding attack, low soil. water The vapour TT coating transmission system is and suitable low for water use absorption in highly aggressive as well as soils. providing high electrical resistance. Application Application of of Tape TT TT Wrap DN80-700 pipes are supplied with a nominally 2mm thick polyethylene coating, which is Tape DN60-700 is factory applied around the body of the pipe. The tape is applied around and applied using pipes a heat are supplied bonding with adhesive, a nominally co-extrusion 2mm technique. thick polyethylene DN800-2000 coating, pipes which are along is applied the pipe using until a heat it covers bonding the adhesive, pipe from co-extrusion the back of technique. the socket to DN800-2000 a point pipes supplied with a sprayed polyurethane coating, 900 microns thick. The TT coating system sufficiently are supplied removed with a sprayed from the polyurethane spigot such coating, that it will 900 not microns interfere thick. with The jointing. TT coating Each minimises risk of damage during transportation and installation. wrap system overlaps minimises the preceding risk of damage one by during approximately transportation mm and or installation. 55%, depending upon the degree of protection required. The tension in the tape results in a protective wrap which For more adheres information strongly on to TT the external pipe body, coating completely please contact isolating Pipes it from Technical the soil. Sales Department, Tel: 0115 930 0650/0700. 100 90

Section 5: Pipe Coatings Special Table 31: TT Water Pipe, Rapid Joint Applications: Allowable Socket Allowable Pipe Spigot OD Product In Operating certain soils and under specific conditions, PAM Natural/Integral OD Weight DN Pipe Class Deflection Length mm Plus and PAM Large Code DN Pressure Water Pipe/Integral, may not offer sufficient protection. mm (Kg/m) (Degree) (mm) (ØDE) For these instances, Saint- (PFA) (ØB) Gobain PAM UK can offer various alternative protection systems. See table 26 detailing 80 SSA80F60AG C types of soil conditions 5 and the 6000 appropriate recommended 98 7.0 protection 13.5 system. 100 SSB10F60AG C 5 6000 118 188.0.5 150 SSB15F60AG C 5 6000 170 242.0.0 Zinc + PE Sleeving 200 SSB20F60AG C 5 6000 222 295.0 35.0 0 SSBF60AG C 5 6000 274 352.0 46.0 How Sleeving Works: 300 350 0 SSB30F60AG SSB35G60AG SSBG60AG C C30 C30 5 6000 326 9.2 58.5 The principal function of the polyethylene sleeving is to separate the pipe from contact with the 30 soil environment 4 thus 6000 preventing non-uniform 378 464.2 contact with 71.5 the soil solids. The system is therefore relatively insensitive to minor handling damage and the presence of ground water inside the sleeving. Where major damage to the sleeving is 30 4 6000 429 5.2 83.5 caused however, repairs must be carried out before laying. Application of PE sleeving 450 SSB45G60AG C30 30 4 6000 480 574.2 98.5 500 SSB50G60AG C30 Polyethylene 30 sleeving 4 may be obtained 6000 from 532 Saint-Gobain 629.2 PAM UK for 115.0 application on site. Polyethylene sleeving can be fitted on site and no special equipment is needed 600 SSB60G60AG C30 other than that necessary to lift the pipes and fittings. 30 4 6000 635 738.5 115.5 700 SSB70G60AG C Details on the size of sleeving required for each pipe diameter with the weight and 4 6000 738 863.0 223.0 approximate length of sleeving per standard roll can be found in the Installation Guide, www.saint-gobain-pam.co.uk 800 SSB80H70AH C 4 6950 842 974.0 233.0 Zinc + Tape Wrap 900 SSB90H70AH C 4 6950 945 1082.0 283.5 Tape Wrapping 1000 SSC10H70AH C 4 6960 1048 1191.0 339.0 How Tape Wrap Works: 00 SSCH80AH C 3 80 68 1815.9 815.5 The tape exhibits high resistance to bacterial attack, low water vapour transmission 1800 SSC18H80AH C 2.5 8150 1875 2032.2 1004.0 and low water absorption as well as providing high electrical resistance. Application of Tape Wrap 2000 SSC20H80AH C 2 8130 2082 29.0 1220.0 Tape is factory applied around the body of the pipe. The tape is applied around and along the pipe until it covers the pipe from the back of the socket to a point sufficiently removed from the spigot such that it will not interfere with jointing. Each wrap overlaps the preceding one by approximately mm or 55%, depending upon the degree of protection required. The tension in the tape results in a protective wrap which adheres strongly to the pipe body, completely isolating it from the soil. 1200 SSC12H79AH C In highly aggressive soils a more robust type of protection may be necessary. Saint- 4 8190 15 1412.5 467.0 Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive tape throughout the diameter range. The tape consists of a combined anti-corrosion mastic 10 SSC14H80AH C 3 8170 1462 1592.1 641.0 and pressure sensitive adhesive, laminated to a flexible PVC backing. - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on Rapid gaskets water please refer to page 70 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar 90 101

Section 5: Pipe Coatings Special Table 32: TT Water Pipe, Universal Vi Joint Applications: Allowable Socket Allowable Pipe Spigot OD Product In Operating certain soils and under specific conditions, PAM Natural/Integral OD Weight DN Pipe Class Deflection Length mm Plus and PAM Large Code DN Pressure Water Pipe/Integral, may not offer sufficient protection. mm (Kg/m) (Degree) (mm) (ØDE) For these instances, Saint- (PFA) (ØB) Gobain PAM UK can offer various alternative protection systems. See table 26 detailing 80 SGA80N60AG C100 types of 60soil conditions 3 and the 5970 appropriate recommended 98 159 protection.0 system. 100 SGB10N60AG C100 56 3 5970 118 188 20.0 150 SGB15N60AG C64 48 3 5970 170 230 29.5 Zinc + PE Sleeving 200 SGB20N60AG C64 43 3 5970 222 290.5 How Sleeving Works: 0 SGBN60AG C50 39 3 5970 274 350 54.0 300 350 SGB30N60AG SGB35N60AG C50 C The principal 34 function 3 of the polyethylene 5970 sleeving 326 is to separate 8 the 68.0 pipe from contact with the soil environment thus preventing non-uniform contact with the soil solids. The system is therefore 3 relatively 5970 insensitive to 378minor handling 463 damage 85.0and the presence of ground water inside the sleeving. Where major damage to the sleeving is 0 SGBN60AG C caused 20 however, repairs 3 must be 5970 carried out before 429 laying. 510 100.5 Application of PE sleeving 450 SGB45N60AG C 3 5970 480 570 119.0 500 SGB50N60AG C Polyethylene sleeving may be obtained from Saint-Gobain PAM UK for application on site. Polyethylene sleeving 2 can be 5970 fitted on site 532and no special 6 equipment 143.0 is needed other than that necessary to lift the pipes and fittings. 600 SGB60N60AG C 2 5970 635 7 192.5 Details on the size of sleeving required for each pipe diameter with the weight and approximate length of sleeving per standard roll can be found in the Installation Guide, www.saint-gobain-pam.co.uk - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on Rapid gaskets water please refer to page 70 - For information on Universal Vi Anchoring gasket please refer to page 75 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar Zinc + Tape Wrap Tape Wrapping In highly aggressive soils a more robust type of protection may be necessary. Saint- Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive tape throughout the diameter range. The tape consists of a combined anti-corrosion mastic and pressure sensitive adhesive, laminated to a flexible PVC backing. How Tape Wrap Works: The tape exhibits high resistance to bacterial attack, low water vapour transmission and low water absorption as well as providing high electrical resistance. Application of Tape Wrap Tape is factory applied around the body of the pipe. The tape is applied around and along the pipe until it covers the pipe from the back of the socket to a point sufficiently removed from the spigot such that it will not interfere with jointing. Each wrap overlaps the preceding one by approximately mm or 55%, depending upon the degree of protection required. The tension in the tape results in a protective wrap which adheres strongly to the pipe body, completely isolating it from the soil. 102 90

Section 5: Pipe Coatings Special Table 33: TT Water Pipe, Universal Ve Joint Applications: Allowable Socket Allowable Pipe Spigot OD Product In Operating certain soils and under specific conditions, PAM Natural/Integral OD Weight DN Pipe Class Deflection Length mm Plus and PAM Large Code DN Pressure Water Pipe/Integral, may not offer sufficient protection. mm (Kg/m) (Degree) (mm) (ØDE) For these instances, Saint- (PFA) (ØB) Gobain PAM UK can offer various alternative protection systems. See table 26 detailing 100 SFB10N60AG C100 types 64 of soil conditions 3 and the 5970 appropriate 117.8 recommended 188protection 20.0system. 150 SFB15N60AG C64 60 3 5970 9.7 230 29.0 200 SFB20N60AG C64 52 3 5970 221.6 290.5 Zinc + PE Sleeving 0 SFBN60AG C50 46 3 5970 273 350 54.0 300 SFB30N60AG C50 41 3 5970 324.9 8 68.0 How Sleeving Works: 350 0 450 SFB35N60AG SFBN60AG SFB45N60AG C C C 38 3 5970 376.8 463 85.0 The principal function of the polyethylene sleeving is to separate the pipe from contact with the 35 soil environment 3 thus 5970 preventing non-uniform 427.7 510 contact with 99.5 the soil solids. The system is therefore relatively insensitive to minor handling damage and the presence of ground water inside the sleeving. Where major damage to the sleeving is 32 3 5970 478.6 570 119.0 caused however, repairs must be carried out before laying. Application of PE sleeving 500 SFB50N60AG C 30 2 5970 530.5 6 143.0 600 SFB60N60AG C Polyethylene 30 sleeving 2 may be obtained 5970 from 633.3 Saint-Gobain 7PAM UK 192.5 for application on site. Polyethylene sleeving can be fitted on site and no special equipment is needed 700 SFB70N60AG C30 other than that necessary to lift the pipes and fittings. 27 2 5970 736.6 855 234.0 800 SFB80N70AH C30 Details on the size of sleeving required for each pipe diameter with the weight and 1.5 6890 8.4 980 282.0 approximate length of sleeving per standard roll can be found in the Installation Guide, www.saint-gobain-pam.co.uk 900 SFB90N70AH C30 1.5 6870 943.2 1087 349.0 Zinc + Tape Wrap 1000 SFC10N70AH C30 1 6880 1046 1191 3.0 Tape Wrapping 1200 SFC12G80AH C30 1 8150 12.3 1415 561.0 In highly aggressive soils a more robust type of protection may be necessary. Saint- Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive tape throughout the diameter range. The tape consists of a combined anti-corrosion mastic and pressure sensitive adhesive, laminated to a flexible PVC backing. - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on Rapid gaskets water please refer to page 70 - For information on Universal Ve Locking ring please refer to page 77 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar How Tape Wrap Works: The tape exhibits high resistance to bacterial attack, low water vapour transmission and low water absorption as well as providing high electrical resistance. Application of Tape Wrap Tape is factory applied around the body of the pipe. The tape is applied around and along the pipe until it covers the pipe from the back of the socket to a point sufficiently removed from the spigot such that it will not interfere with jointing. Each wrap overlaps the preceding one by approximately mm or 55%, depending upon the degree of protection required. The tension in the tape results in a protective wrap which adheres strongly to the pipe body, completely isolating it from the soil. 90 103

Section 5: Pipe Coatings Special Table 34: TT Sewer Pipe, Rapid Joint Applications: Allowable Allowable Pipe Spigot OD Socket OD Product Operating In certain soils and under specific conditions, PAM Natural/Integral Weight DN Deflection Length mm mm Plus and PAM Large Code Pressure DN Water Pipe/Integral, may not offer sufficient protection. (Kg/m) (Degree) (mm) (ØDE) (ØB) For these instances, Saint- (PFA) Gobain PAM UK can offer various alternative protection systems. See table 26 detailing 80 TSA80S60BG types of 5soil conditions 6000and the appropriate 98 recommended 7.0 13.5 protection system. 100 TSB10S60BG 5 6000 118 188.0 19.0 150 TSB15S60BG 5 6000 170 242.0 23.5 Zinc + PE Sleeving 200 TSB20S60BG 5 6000 222 295.0 32.5 0 TSBS60BG 38 5 6000 274 352.0 42.0 How Sleeving Works: 300 350 0 TSB30S60BG TSB35S60BG TSBS60BG 35 32 30 5 6000 326 9.2 53.0 The principal function of the polyethylene sleeving is to separate the pipe from contact with the 4 soil environment 6000 thus preventing 378 non-uniform 464.2 contact 69.0 with the soil solids. The system is therefore relatively insensitive to minor handling damage and the presence of ground water inside the sleeving. Where major damage to the sleeving is 4 6000 429 5.2 81.5 caused however, repairs must be carried out before laying. Application of PE sleeving 450 TSB45S60BG 29 4 6000 480 574.2 95.0 500 TSB50S60BG 28 Polyethylene 4 sleeving 6000 may be obtained 532 from 629.2 Saint-Gobain 111.0 PAM UK for application on site. Polyethylene sleeving can be fitted on site and no special equipment is needed 600 TSB60S60BG 26 other than that necessary to lift the pipes and fittings. 4 6000 635 738.5 141.0 700 TSB70E60BG 29 Details on the size of sleeving required for each pipe diameter with the weight and 4 6000 738 863.0 206.0 approximate length of sleeving per standard roll can be found in the Installation Guide, www.saint-gobain-pam.co.uk 800 TSB80E69BH 28 4 6950 842 974.0 243.5 Zinc + Tape Wrap 900 TSB90E69BH 27 4 6950 945 1082.0 296.0 Tape Wrapping 1000 TSC10E69BH 26 4 6960 1048 1191.0 348.0 How Tape Wrap Works: 00 TSCN80BH 27 3 80 68 1815.9 859.0 The tape exhibits high resistance to bacterial attack, low water vapour transmission 1800 TSC18N80BH 27 2.5 8150 1875 2032.2 1045.0 and low water absorption as well as providing high electrical resistance. Application of Tape Wrap 2000 TSC20N80BH 26 2 8130 2082 29.0 12.0 Tape is factory applied around the body of the pipe. The tape is applied around and along the pipe until it covers the pipe from the back of the socket to a point sufficiently removed from the spigot such that it will not interfere with jointing. Each wrap overlaps the preceding one by approximately mm or 55%, depending upon the degree of protection required. The tension in the tape results in a protective wrap which adheres strongly to the pipe body, completely isolating it from the soil. 1200 TSC12N79BH 29 In highly aggressive soils a more robust type of protection may be necessary. Saint- 4 8190 15 1412.5 513.0 Gobain PAM UK is able to supply pipes wrapped with heavy duty self-adhesive tape throughout the diameter range. The tape consists of a combined anti-corrosion mastic 10 TSC14N80BH 28 3 8170 1462 1592.1 686.0 and pressure sensitive adhesive, laminated to a flexible PVC backing. - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on Rapid gaskets sewer please refer to page 71 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar 104 90

Section 5: Pipe Coatings Special Table 35: TT Sewer Pipe, Universal Ve Joint Applications: Allowable Allowable Pipe Prod Operating In certain soils and under specific Spigot conditions, OD Socket PAM OD Natural/Integral Weight Plus and PAM Large DN Deflection Length code Pressure DN Water Pipe/Integral, may mm not(øde) offer sufficient mm (ØB) protection. (Kg/m) (Degree) (mm) For these instances, Saint- (PFA) Gobain PAM UK can offer various alternative protection systems. See table 26 detailing 100 Enquire 64 types of 3 soil conditions 5970 and the 118 appropriate recommended 188 20.0protection system. 150 Enquire 60 3 5970 170 230 29.0 200 TFB20N60BG 52 3 5970 222 290.5 Zinc + PE Sleeving 0 TFBN60BG 46 3 5970 274 350 54.0 300 TFB30N60BG 41 3 5970 326 8 68.0 How Sleeving Works: 350 TFB35N60BG 38 3 5970 378 463 85.0 0 450 500 600 TFBN60BG TFB45N60BG TFB50N60BG TFB60N60BG 35 32 30 30 3 5970 429 510 100.0 The principal function of the polyethylene sleeving is to separate the pipe from contact with the 3 soil environment 5970 thus 480 preventing non-uniform 570 118.5 contact with the soil solids. The system 2 is therefore 5970 relatively 532 insensitive 6 to minor handling 137.5 damage and the presence of ground water inside the sleeving. Where major damage to the sleeving is 2 5970 635 7 179.0 caused however, repairs must be carried out before laying. 700 TFB70N60BG 27 2 5970 738 855 229.0 Application of PE sleeving 150 200 0 JSB15YAT JSB20YAT JSBYAT EPDM EPDM EPDM Rubber sleeve In highly aggressive soils a more robust type of protection may be necessary. Saint- Gobain PAM UK is able to Rubber supply sleeve pipes wrapped with heavy duty self-adhesive tape throughout the diameter range. The tape consists of a combined anti-corrosion mastic Rubber sleeve and pressure sensitive adhesive, laminated to a flexible PVC backing. - Lengths and weights are provided for estimation purposes only and actual values may vary from those provided in these tables - For information on Rapid gaskets water please refer to page 70 - For information on Universal Ve Locking ring please refer to page 77 - Allowable test pressure (PEA) and allowable maximum operating pressure (PMA) can easily be calculated for the above pipes by using the following formulas: PMA = PFA x 1.2 PEA = PMA + 5 bar Polyethylene sleeving may be obtained from Saint-Gobain PAM UK for application on site. Polyethylene sleeving can be fitted on site and no special equipment is needed other than that necessary to lift the pipes and fittings. Table 36: Socket sleeve for TT Pipes DN Product Code Material Zinc + Details on the size of sleeving required for each pipe diameter with the weight and approximate length of sleeving per standard roll can be found in the Installation Guide, www.saint-gobain-pam.co.uk Description Tape Wrap 80 JSA80YAT EPDM Rubber sleeve 100 JSB10YAT EPDM Rubber sleeve Tape Wrapping 300 JSB30YAT EPDM Rubber sleeve How Tape Wrap Works: 350 205584 MPSM Heat shrink sleeve The tape exhibits high resistance to bacterial attack, low water vapour transmission and low water absorption as well as providing high electrical resistance. 0 111234 MPSM Heat shrink sleeve Application of Tape Wrap 450 500 600 110301 110078 123649 MEPS MPSM MPSM Heat shrink sleeve Tape is factory applied around the body of the pipe. The tape is applied around and along the pipe until it covers the pipe from the back of the socket to a point Heat shrink sleeve sufficiently removed from the spigot such that it will not interfere with jointing. Each wrap overlaps the preceding one by approximately mm or 55%, depending upon the degree of protection required. Heat shrink The sleeve tension in the tape results in a protective wrap which adheres strongly to the pipe body, completely isolating it from the soil. Above 700mm sleeve generally not required. For further information please contact our Technical Sales Department, Tel 0115 930 0700 800-2000 800-2000 158030 HEPS Heat shrink Roll (30m) 158098 HEPS Raychem fastners - Pk 90 105

Coatings Zinc + Gobain PAM UK can offer various alternative protection systems. See table 26 detailing types of soil conditions and the appropriate recommended protection system. ZM-U PE Sleeving How Sleeving Works: For trenchless installations Saint-Gobain PAM UK UK can can offer offer PAM PAM Direxional, Directional, a ductile a ductile iron iron pipe specifically designed for trenchless installation. PAM Directional has a coating The pipe principal specifically function designed of the for polyethylene trenchless installation. sleeving is PAM to separate Direxional the (DN100-700) pipe from contact has a which is able to cope with the rigors of trenchless installations. 200mg/m 2 of Zinc + with coating the which soil environment is able to cope thus with preventing the rigors non-uniform of trenchless contact installations. with the 200mg/m soil solids. 2 of Zinc ZM-U is applied to Pam Directional pipes to ensure protection from potentially The + ZM-U system is applied is therefore to Pam relatively Direxional insensitive pipes to ensure to minor protection handling from damage potentially and the damaging damaging conditions. ZM-U provides protection against damage to pipes being pulled presence conditions. of ZM-U ground provides water inside protection the sleeving. against damage Where major to pipes damage being to pulled the sleeving through is rocky through rocky conditions and performs in the most extreme conditions. caused conditions however, and performs repairs must in the be most carried extreme out before conditions. laying. Application of PE sleeving How ZM-U works: How ZM-U works: PAM Directional is available in diameter range DN100-700. Polyethylene sleeving may be obtained from Saint-Gobain PAM UK for application on site. ZM-U Polyethylene is a fibre cement sleeving coating can applied be fitted on on top site of and 200mg/m no special 2 of zinc. equipment The tough is needed nature of ZM-U is a fibre cement coating applied on top of 200mg/m 2 of zinc. The tough nature other the ZM-U than coating that necessary means that to lift there the are pipes no special and fittings. handling requirements. ZM-U provides a of total the barrier ZM-U between coating means the pipe that and there surrounding are no special ground handling conditions requirements. eliminating any risk ZM-U of corrosion. provides The a coating total barrier provides between an extremely the pipe robust and the protection surrounding system ground and conditions Details on the size of sleeving required for each pipe diameter with the weight no and further eliminating protection is any required. risk of corrosion. The coating provides an extremely robust protection approximate length of sleeving per standard roll can be found in the Installation system and no further protection is required. Guide, www.saint-gobain-pam.co.uk Extruded PE coating Spray PU coating Zinc + TT Tape Wrap Tape Wrapping In highly aggressive soil conditions Saint-Gobain PAM UK would normally recommend the use of Tape Wrap (either % or 55mm overlap). However, Saint-Gobain PAM UK is also In highly able aggressive to supply an soils alternative a more robust external type protective of protection systems may called be necessary. TT. The TT Saint- external coating Gobain PAM system UK comprises able to supply thick organic pipes wrapped coatings. with (Extruded heavy polyethylene duty self-adhesive PE DN60-700 tape & throughout sprayed polyethylene the diameter PU range. DN800-2000). The tape consists of a combined anti-corrosion mastic and pressure sensitive adhesive, laminated to a flexible PVC backing. How TT works: How Tape Wrap Works: The TT external coating system uses thick organic coatings. These coatings provide a complete The tape exhibits barrier between high resistance the pipe to and bacterial the surrounding attack, low soil. water The vapour TT coating transmission system is suitable and low for water use absorption in highly aggressive as well as soils. providing high electrical resistance. Application of TT Tape Wrap DN60-700 Tape is factory pipes applied are supplied around with the body a nominally of the pipe. 2mm The thick tape polyethylene is applied around coating, and which is along applied the pipe using until a heat it covers bonding the adhesive, pipe from co-extrusion the back of technique. the socket to DN800-2000 a point pipes are sufficiently supplied removed with a sprayed from the polyurethane spigot such coating, that it will 900 not microns interfere thick. with The jointing. TT coating Each system wrap overlaps minimises the preceding risk of damage one by during approximately transportation mm and or installation. 55%, depending upon the degree of protection required. The tension in the tape results in a protective wrap For which more adheres information strongly on to TT the external pipe body, coating completely please contact isolating Pipes it from Technical the soil. Sales Department, Tel: 0115 930 0650/0700. 90 106 91

Section 5: Pipe Coatings Installation and Handling For guidance on how to install and handle pipes and fittings with any of the protection systems in this product guide please refer to the Installation Guidelines on our website: www.saint-gobain-pipelines.co.uk. pam.co.uk Cathodic Protection Ductile iron mains which contain sections that may be buried adjacent to pipelines with cathodic protection systems or other sources of electrical currents such as train or tram lines may be subject to eddy currents. In these circumstances further advice should be sought from Technical Sales Department, Tel: 0115 930 0700. 0650/0700. The use of Cathodic protection systems for new ductile iron mains is not recommended by Saint-Gobain PAM UK for the following reasons: Other effective and maintenance free protection systems provide suitable protection for iron pipelines, e.g. PAM Blutop/Natural/Integral Plus, polyethylene Plus, polyethylene sleeving and sleeving tape and wrapping. tape wrapping. Most types of joint used in ductile iron pipelines provide a degree of insulation between both pipes and fittings. This insulation prevents the establishment of the long-line corrosion currents which are a feature of welded steel pipelines. If a cathodic protection system is applied to a ductile iron pipeline, it will be necessary to bond across the joints to guarantee electrical continuity. This will add significantly to the cost of installation, and takes away the advantages related to the insulating joints. Epoxy Coated Fittings DN60-2000 80 All ductile iron fittings in the sizes DN60-2000 80 are supplied with an epoxy coating conforming to BS EN 14901. Potable water fittings are coated internally and externally with blue epoxy. The blue epoxy is approved to BS 6920. Coated products uti are DN600 also approved are also by approved the Secretary by the of Secretary State under of State Regulation under31.4.a Regulation of the Water 31 Supply of the (Water Quality) Supply (Water Regulations Quality) 2000. Regulations These are 2000. listed as These PAM are Natural listed as Pipeline PAM Components Natural Pipeline in the Components DWI list of approved in the DWI products. list of approved products. Sewerage fittings are internally and externally coated with a red epoxy. Compatibility with Pipe Systems Epoxy coated fittings are designed to form a complete system with Saint-Gobain PAM UK pipes. The tough epoxy is able to cope with aggressive soil conditions without the need the for additional protection and PAM Epoxy epoxy coated fittings are therefore suitable for use in conjunction with any pipe coating systems offered by Saint-Gobain PAM UK. 92 107

Your local stockist is: Other products and services available from Saint-Gobain PAM: Ensign Cast iron above and below ground drainage system BSI Kitemark approved to BS EN 877. Used for soil and waste, rainwater, suspended, buried and bridge drainage applications, providing lifetime service for commercial and public buildings. Ensign EEZI-FIT A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Technical Enquiries for Access Covers and Grating Tel: +44 (0)64 8114 Fax +44 (0) 64 812060 Email:technical.covers.uk.pam@ saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 Brochure Hotline Tel:+44(0)800 028 2134 Fax:+44(0)115 932 9513 brochures.uk.pam@saint-gobain.com Technical Enquiries Tel:+44(0)115 930 0700 Sales Enquiries Tel:+44(0)115 930 0630 sales.uk.pam@saint-gobain.com Head Office Lows Lane,Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel:+44(0)115 930 5000 Fax:+44(0)115 932 9513 Your local stockist is: available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Your local stockist is: in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Sales Enquiries Tel +44 (0) 115 9300681 al stockist is: products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT ge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity nstallations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and oil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable nditions due to its superior strength performance. cal Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular s systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. al and Integral Plus te range of sewerage pipeline products available 0 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. ation given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the ined in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. t-gobain PAM UK Assurance anagement Systems BS EN ISO 9001:2000 d firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 Your local stockist is: EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT nge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity installations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and soil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable onditions due to its superior strength performance. ical Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular es systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. ral and Integral Plus te range of sewerage pipeline products available 80 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. al stockist is: products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT nge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity installations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and soil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable onditions due to its superior strength performance. ical Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular es systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. ral and Integral Plus te range of sewerage pipeline products available 80 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. ation given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the ined in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. t-gobain PAM UK Assurance Environmental Standard 2012 Saint-Gobain PAM UK Your local stockist is: Other products and services available from Saint-Gobain PAM: Ensign Cast iron above and below ground drainage system BSI Kitemark approved to BS EN 877. Used for soil and waste, rainwater, suspended, buried and bridge drainage applications, providing lifetime service for commercial and public buildings. Ensign EEZI-FIT A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system c with plastic pipe made from ductile iron. It has advantages of a corrosion resistant exterior co innovative Ductan lining to prevent the risk of Couplings and flange adapt Accommodating a wide range of external diam pipe materials in accordance with British, Euro Standards and ISO 9001 requirements. A divers from wide tolerance fittings to dedicated prod Valves A comprehensive range of valves and accessor for water and sewerage applications. All valves in compliance with WRAS requirements where and manufactured in accordance with ISO 900 Gate valves, resilient and metal faced DN50 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed peace of mind and confidence to water utilitie contractors in the knowledge that the ductile that they have purchased will be installed effe its optimum condition. Access covers and gratings A comprehensive range of ductile iron access c gratings. For high performance products which increasing demands from traffic to a purpose d range for low density applications, Saint-Goba access cover products provide targeted solutio civil engineering, utility and infrastructure sec PAM Estate Designed to meet the requirements and expect housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Goba constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN IS www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Technical Enquiries for Access Covers and Grating Tel: +44 (0)64 8114 Fax +44 (0) 64 812060 Email:technical.covers.uk.pam@ saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 (Register firm: EMS83973) Products and services available from Saint-Gobain PAM UK: Your local stockist is: Other products and services available from Saint- Ensign Cast iron above and below ground drainage system BSI Kitemark approved to BS EN 877. Used for soil and waste, rainwater, suspended, buried and bridge drainage applications, providing lifetime service for commercial and public buildings. Ensign EEZI-FIT A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Blu A sm with adva innov Cou Accom pipe Stand from Val A com for w in co and m Ga No Tid Ai Fir Bu Co Ind An in peac contr that its op Acc A com grati incre range acces civil e PAM Desig hous The information given in this literature is, to the best of our knowledge, correct at constantly looking at ways of improving their products and services and therefore data contained in this publication. Any orders placed will be subject to our Standa 2011 Saint-Gobain PAM UK www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Technical Enquiries for Access Covers and Grating Tel: +44 (0)64 8114 Fax +44 (0) 64 812060 Email:technical.covers.uk.pam@ saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 al stockist is: products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT nge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity nstallations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and soil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable onditions due to its superior strength performance. ical Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular es systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. ral and Integral Plus te range of sewerage pipeline products available 0 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. Your local stockist is: Other products and services available from Saint-Gobain PAM: Ensign Cast iron above and below ground drainage system BSI Kitemark approved to BS EN 877. Used for soil and waste, rainwater, suspended, buried and bridge drainage applications, providing lifetime service for commercial and public buildings. Ensign EEZI-FIT A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Technical Enquiries for Access Covers and Grating Tel: +44 (0)64 8114 Fax +44 (0) 64 812060 Email:technical.covers.uk.pam@ saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 Brochure Hotline Tel:+44(0)800 028 2134 Fax:+44(0)115 932 9513 brochures.uk.pam@saint-gobain.com Technical Enquiries Tel:+44(0)115 930 0700 Sales Enquiries Tel:+44(0)115 930 0630 sales.uk.pam@saint-gobain.com Head Office Lows Lane,Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel:+44(0)115 930 5000 Fax:+44(0)115 932 9513 Your local stockist is: downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Your local stockist is: A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 al stockist is: products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT ge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity nstallations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and oil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable nditions due to its superior strength performance. cal Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular s systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. al and Integral Plus te range of sewerage pipeline products available 0 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. ation given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the ined in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. t-gobain PAM UK Assurance anagement Systems BS EN ISO 9001:2000 d firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 Your local stockist is: EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN ISO 101:2004 www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT nge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity installations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and soil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable onditions due to its superior strength performance. ical Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular es systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. ral and Integral Plus te range of sewerage pipeline products available 80 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the al stockist is: products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT nge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity installations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and soil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable onditions due to its superior strength performance. ical Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular es systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. ral and Integral Plus te range of sewerage pipeline products available 80 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. ation given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Gobain PAM UK is looking at ways of improving their products and services and therefore reserve the right to change, without prior notice, any of the ined in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. t-gobain PAM UK 2012 Saint-Gobain PAM UK Your local stockist is: Other products and services available from Saint-Gobain PAM: Ensign Cast iron above and below ground drainage system BSI Kitemark approved to BS EN 877. Used for soil and waste, rainwater, suspended, buried and bridge drainage applications, providing lifetime service for commercial and public buildings. Ensign EEZI-FIT A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system c with plastic pipe made from ductile iron. It has advantages of a corrosion resistant exterior co innovative Ductan lining to prevent the risk of Couplings and flange adapt Accommodating a wide range of external diam pipe materials in accordance with British, Euro Standards and ISO 9001 requirements. A divers from wide tolerance fittings to dedicated prod Valves A comprehensive range of valves and accessor for water and sewerage applications. All valves in compliance with WRAS requirements where and manufactured in accordance with ISO 900 Gate valves, resilient and metal faced DN50 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed peace of mind and confidence to water utilitie contractors in the knowledge that the ductile that they have purchased will be installed effe its optimum condition. Access covers and gratings A comprehensive range of ductile iron access c gratings. For high performance products which increasing demands from traffic to a purpose d range for low density applications, Saint-Goba access cover products provide targeted solutio civil engineering, utility and infrastructure sec PAM Estate Designed to meet the requirements and expect housing and commercial sectors. The information given in this literature is, to the best of our knowledge, correct at the time of going to print. However, Saint-Goba constantly looking at ways of improving their products and services and therefore reserve the right to change, without prior notice data contained in this publication. Any orders placed will be subject to our Standard Conditions of Sale, available on request. 2011 Saint-Gobain PAM UK Quality Assurance Quality Management Systems BS EN ISO 9001:2000 (Registered firm: 12908) Environmental Standard Environmental Management Systems BS EN IS www.saint-gobain-pam.co.uk Saint-Gobain PAM UK Head Office: Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU Tel: +44 (0)115 930 5000 Fax: +44 (0)115 932 9513 Technical Enquiries for Access Covers and Grating Tel: +44 (0)64 8114 Fax +44 (0) 64 812060 Email:technical.covers.uk.pam@ saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 (Register firm: EMS83973) Products and services available from Saint-Gobain PAM UK: Your local stockist is: Other products and services available from Saint- Ensign Cast iron above and below ground drainage system BSI Kitemark approved to BS EN 877. Used for soil and waste, rainwater, suspended, buried and bridge drainage applications, providing lifetime service for commercial and public buildings. Ensign EEZI-FIT A new range of cast iron push-fit fittings and couplings in 100 diameter, Kitemarked to BS EN 877 for gravity sanitary installations. Timesaver Cast iron above ground system BSI Kitemark approved to BS 4 part 2, used for soil and waste refurbishment, and external soil stacks for traditional appearance. Cast iron below ground system BSI Kitemark approved to BS 437, favoured for under building drainage, and unstable ground conditions due to its superior strength performance. Classical Classical Plus Cast iron rainwater and gutter systems to BS 460 BBA certified. Seven gutter profiles and circular and rectangular downpipes systems supplied in a black primer coat. Classical Plus is a standard range of gutters and downpipes available in a factory applied semi-gloss black finished coat for immediate installation. EPAMS A complete syphonic rainwater system, consisting of steel syphonic roof outlets and cast iron pipework to BS EN 877 BBA certified. Integral and Integral Plus A complete range of sewerage pipeline products available from DN80 to DN2000, fully compliant with the requirements of BS EN 598. Natural A new generation of potable water pipeline products available DN80 to DN800 with a new revolutionary system of external protection, fully compliant with the requirements of BS EN 545. Large diameter water pipes Large diameter water pipeline products available DN900 to DN2000, fully compliant with the requirements of BS EN 545. Blu A sm with adva innov Cou Accom pipe Stand from Val A com for w in co and m Ga No Tid Ai Fir Bu Co Ind An in peac contr that its op Acc A com grati incre range acces civil e PAM Desig hous The information given in this literature is, to the best of our knowledge, correct at constantly looking at ways of improving their products and services and therefore www.saint-gobain-pam.co.uk Technical Enquiries for Access Covers and Grating Tel: +44 (0)64 8114 Fax +44 (0) 64 812060 Email:technical.covers.uk.pam@ saint-gobain.com Sales Enquiries Tel +44 (0) 115 9300681 al stockist is: products and services available from Saint-Gobain PAM: n above and below ground drainage system ark approved to BS EN 877. soil and waste, rainwater, suspended, buried and ainage applications, providing lifetime service for ial and public buildings. n EEZI-FIT nge of cast iron push-fit fittings and couplings meter, Kitemarked to BS EN 877 for gravity nstallations. aver above ground system BSI Kitemark approved to rt 2, used for soil and waste refurbishment, and soil stacks for traditional appearance. below ground system BSI Kitemark approved to voured for under building drainage, and unstable onditions due to its superior strength performance. ical Classical Plus rainwater and gutter systems to BS 460 BBA Seven gutter profiles and circular and rectangular es systems supplied in a black primer coat. Plus is a standard range of gutters and downpipes in a factory applied semi-gloss black finished coat diate installation. S te syphonic rainwater system, consisting of steel roof outlets and cast iron pipework to BS EN 877 fied. ral and Integral Plus te range of sewerage pipeline products available 0 to DN2000, fully compliant with the ents of BS EN 598. al neration of potable water pipeline products DN80 to DN800 with a new revolutionary system al protection, fully compliant with the ents of BS EN 545. diameter water pipes meter water pipeline products available DN900 to fully compliant with the requirements of BS EN 545. Blutop A small diameter, push fit water pipe system compatible with plastic pipe made from ductile iron. It has the added advantages of a corrosion resistant exterior coating and the innovative Ductan lining to prevent the risk of corrosion. Couplings and flange adaptors Accommodating a wide range of external diameters and pipe materials in accordance with British, European Standards and ISO 9001 requirements. A diversified range from wide tolerance fittings to dedicated products. Valves A comprehensive range of valves and accessories suitable for water and sewerage applications. All valves are supplied in compliance with WRAS requirements where applicable, and manufactured in accordance with ISO 9001. Gate valves, resilient and metal faced DN50 to DN300 Non return valves DN80 to DN300 Tidal flap valves DN80 to DN600 Air valves Fire hydrants Butterfly valves DN50 to DN2000 Control valves Induct Plus An installation accreditation scheme, designed to give peace of mind and confidence to water utilities and contractors in the knowledge that the ductile iron pipeline that they have purchased will be installed effectively and in its optimum condition. Access covers and gratings A comprehensive range of ductile iron access covers and gratings. For high performance products which meet the increasing demands from traffic to a purpose designed range for low density applications, Saint-Gobain PAM UK access cover products provide targeted solutions for the key civil engineering, utility and infrastructure sectors. PAM Estate Designed to meet the requirements and expectations of the housing and commercial sectors. Visit: www.saint-gobain-pam.co.uk