Liebherr Simulations LiSIM

Modes of application

LiSIM modularity Set-up Classroom Screens Simulation software HD 3/5/9 Motion Controls Construction machines

Cabin Container Small HD 3/5/9 Ultra Narrow HD 3/5/9 3 degrees of freedom 6 degrees of freedom Maritime cranes Container cranes Foundation machines

Set-up The LiSIM simulator is available in a choice of three set-up types. You can choose the best way to train your operators, depending on your requirements. Classroom set-up Designed to be easily integrated into existing training centres. Display, seat and controls are mounted on a base and a sturdy display frame. Integrates into existing classrooms Spacious High-standard

Crane cabin set-up Installed in an original Liebherr crane cabin, this spacesaving solution ensures that the operator becomes familiar with controlling the machine in a real-life environment. Authentic Multifunctional Space-saving 40ft Container set-up The container offers three compartments: the utility room, the simulator area and a classroom. This compact and fully isolated solution includes a heating and airconditioning unit as well as appropriate lighting. Compact Mobile Fully equipped

Screens

The display system is optimized to provide the field view necessary for machine operation. Three types of screens are available: Small HD 46 inch For restricted space Recommended for small cabin solutions High Definition 55 inch 3 cm monitor-bezel 5 screens recommended Ultra Narrow HD 55 inch 5.5 mm monitor-bezel 5 screens recommended

Motion The motion base simulates a realistic feedback, according to current machine movements. The motion base is equipped with either three or six degrees of freedom. In terms of a mechanical body, the number of degrees of freedom is the number of independent movement possibilities.

6 degrees of freedom for cabin or seat 100% realistic feedback Operation training just as in a real- life environment Ideal for fast slewing motion 3 translational and 3 rotational degrees Translation: 1. Moving up and down (heaving) 2. Moving left and right (swaying) 3. Moving forward and backward (surging) Rotation: 1. Tilting forward and backward (pitching) 2. Turning left and right (yawing) 3. Tilting side to side (rolling) 3 degrees of freedom for cabin or seat 50% realistic feedback 1 translational degrees and 2 rotational degrees Translation: 1. Moving up and down (heaving) Rotation: 1. Tilting forward and backward (pitching) 2. Tilting side to side (rolling)

Controls The simulation is based on Liebherr's unique control system with communications protocol. Liebherr supplies the entire set-up of the operator's seat including control levers and control panels as well as keyboard and touchscreen to control the simulations. Construction machinery The Liebherr master control panel allows to operate all simulation scenarios. For an authentic operation of Liebherr crawler cranes (type LR and HS) and rotary drilling rigs (type LB) the construction machinery simulator is equipped with OEM control elements, such as control panel with PLC ("Master") control levers for brake and lifting operation foot pedals for driving and free-fall (dropping) operation of the bucket monitor (touchscreen)

Mobile harbour cranes and offshore cranes The Liebherr master control panel allows to operate all simulation scenarios. For an authentic operation of Liebherr mobile harbour cranes (type LHM) and offshore cranes (type BOS) the simulator is equipped with OEM control elements, such as control panel with PLC ("Master") control levers for brake and lifting operation foot pedals for driving operation monitor (touchscreen) Container cranes The Liebherr master control panel allows to operate all simulation scenarios. For an authentic operation of Liebherr ship to shore cranes (type STG) and rubber tyre gantry cranes (type RTG) the container crane simulator is equipped with OEM control elements, such as control panel with PLC* ("Master") control levers for lifting operation MOPS control monitor (touchscreen) *) Liebherr can integrate the customer's control panel into the Liebherr simulator upon request.

Instructor s station

An instructor's station is included as a standard for simulator start-up and loading scenarios. It comprises the computer in the rack with two 24" displays, keyboard, mouse and gamepad. The instructor's station allows the instructor to monitor the action performed by the operator, modify simulation parameters and inject faults. The instructor can load any scenario. The instructor's station also allows the instructor to "fly through" the entire simulation environment to view the operation from any position.

Simulating all aspects of your job

A wide-ranging functionality... is essential for the simulation of daily routines and extraordinary situations that machine operators face in the real world of cargo handling. Due to the flexibility of the virtual environment, users can run through any load handling situation and simulate harsh environmental conditions when required.

Original software and hardware

The installation of original Liebherr control elements and software guarantees a realistic training experience. The motion base and surround sound system generate a realistic impression just as experienced during real operation. Trainees benefit from the real set-up of the operator's seat, including control levers and control panels as well as a keyboard and touchscreen for the control of the simulations. Full HD flat screens and surround loudspeakers provide sounds and views typically experienced in the cabin. Each simulator is equipped with a multifunctional instructor's station which has complete control over the simulation.

Your benefits For increased productivity heavy equipment operators are continuously looking for effective ways to improve the skills of their employees. Successful customers ensure that the training is completed in an efficient manner at the highest safety level while costs and time are kept at a minimum. LiSIM training simulators from Liebherr are a sophisticated solution that ticks all the boxes. This results in confident operators that are also capable of handling critical situations in an experienced way. During the evaluation process of operator recruitment the LiSIM training solution is a perfect tool to choose the appropriate person for handling heavy equipment. 20 LiSIM - Liebherr Simulations

LiSIM - Liebherr Simulations 21

Higher productivity The operator has the opportunity to experience the operational limits of the equipment without any consequences. Trainees gain useful experience for highly efficient operation. The resulting improvement in the operator's skills allows for safe and productive operation in real life. No damage caused to machine, vessel, containers etc. Learn to work fast without risk. Learn step by step. 22 LiSIM - Liebherr Simulations

Increased safety Thanks to the virtual environment, no damage can be incurred to equipment or surroundings. Likewise, using a Liebherr simulator eliminates the potential for injuries to personnel during training. Trainees can learn instinctively how to react in unexpected situations. All weather conditions All vessel movements Practice emergency procedures Demonstrate fatigue effects 24 LiSIM - Liebherr Simulations

Less costs The LiSIM training solution is in line with environmentallyfriendly operation as it is free of fuel and emission. Moreover, expensive delays in training caused by poor weather conditions are eliminated. Thanks to well-trained operators, simulators have the potential to significantly reduce the likelihood of accidents. Energy-saving Maintenance-free No crane wear caused 26 LiSIM - Liebherr Simulations

The Liebherr Group of Companies Wide Product Range The Liebherr Group is one of the largest construction equipment manufacturers in the world. Liebherr s high-value products and services enjoy a high reputation in many other fields. The wide range includes domestic appliances, aerospace and transportation systems, machine tools and maritime cranes. Exceptional Customer Benefit Every product line provides a complete range of models in many different versions. With both their technical excellence and acknowledged quality, Liebherr products offer a maximum of customer benefits in practical application. State-of-the-art Technology To provide consistent, top quality products, Liebherr attaches great importance to each product area, its components and core technologies. Important modules and components are developed and manufactured in-house, for instance the entire drive and control technology for construction equipment. Worldwide and Independent Hans Liebherr founded the Liebherr family company in 1949. Since that time, the enterprise has steadily grown to a group of more than 130 companies with over 41,000 employees located on all continents. The corporate headquarters of the Group is Liebherr-International AG in Bulle, Switzerland. The Liebherr family is the sole owner of the company. www.liebherr.com LiSIM 11890364 06/2015 Subject to change without notice. www.lisim.liebherr.com lisim@liebherr.com