All Weather Hall Efficient, multipurpose & quick to build
ALL WEATHER HALL www.deboer.com
www.deboer.com ALL WEATHER HALL A flexible solution for a multitude of needs All Weather halls from De Boer provide you with a suitable solution for a multitude of business space needs. They have a proven track record in a wide variety of industries aircraft hangers, bulk and port storage, car showrooms, recycling facilities, sports halls, equestrian centres and even as temporary prisons. Developed to last All Weather halls have been developed, designed and produced by De Boer Scandinavia. Their framework is made out of hot dipped galvanized steel and made to last a lifetime. The standard covering is made of high-quality PVC-coated polyester that can easily last for 25 years, making the All Weather halls a valuable long-term asset. Superior flexibility All Weather halls are available on short lead times and they can be quickly installed. With a large range in widths, heights and lengths they offer a tailor-made space solution for every need. Depending on the surface, All Weather halls can be anchored by ground frame or base plates, in combination with a concrete ring beam. Extensive options Numerous options are available options for doors, windows, side walls, anchoring, climate control and PVC covering. Apart from the standard PVC-coated covering, the side walls can also be fitted with insulating sandwich panels or cladding. Different types of doors, ranging from simple personnel entrance doors to overhead doors and even dock shelters enable you to adapt the halls completely to your needs. Contact us for further advice Because of the adaptable nature of these structures, a simple brochure is unable to convey all possibilities and information. We would like to invite you to contact our sales office to discuss your project, so we may be of further assistance in providing bespoke solution tailored to your specific requirements. t: +31-(0)72 5400 444, f: +31-(0)72 5400 214, info@deboer.com, www.deboer.com
ALL-WEATHER HALL www.deboer.com
ALL-WEATHER HALL www.deboer.com
www.deboer.com R and K models Depending on your specific needs and wants, the roof has a round or angular shape. Hot-dipped galvanized steel structure Withstands substantial wind and snow loads (1-3 kn/m 2 ) Insulating inner skin A double-layer inner skin significantly improves the insulation values and adds to a healthy environment. Wire and wind tensioning system With the tensioned fabric system of De Boer, additional strength is provided for the steel structure. Reliable anchoring The All-Weather hall can be anchored to the ground or concrete ring beams, if required. Standard sail colours (more colours available) Blue, red, grey, green. The roof sails are standard white with a transparency of 75%.
www.deboer.com Ventilation Ventilation holes aid proper air circulation, without allowing water entry. Personnel and access doors The All-Weather hall can be fitted with different types of doors roller shutter doors, overhead doors, personnel access doors. Lighting Different types of lighting are available, depending on specific requirements Steel cladding and insulated panels If required, the All-Weather hall can be fitted with steel cladding or insulating sandwich panels. Dehumidification Heating and cooling A wide range of possible systems ensure the right interior climate. A dehumidified All-Weather hall provides a very cost-efficient storage environment.
ALL WEATHER HALL R SIDE HEIGHT RIDEGE HEIGHT WIDTH TECHNICAL SPECIFICATIONS Widths Side heights 3-6m Ridge heights Bay distance 10m, 20m, 25m, 30m and 40m Approx. 6.3m @ 4m side height (10m hall) / Approx. 10.4m @ 5m side height (40m hall) (external measurements) 4m (standard) Doors To your requirement (i.e. personnel doors, overhead doors, roller shutter doors). The hall is built with a door frame of 4x4m in the gable as standard. Frame Hot-dipped galvanised steel (SS-EN ISO 1461) Anchoring Fabric quality (outer layer) Fabric quality (inner layer) Snow loading capacity Wind loading capacity 26 m/s, terrain type 1 Regulations Ground frame or base plates (concrete ring beam, if required) with earth spikes/anchors PVC-coated polyester weave 1100 dtex panama 2/2 binding. Thickness: 0.65-0.75mm, weight per unit area: 870-930g/m 2. Type approval certificate 2382/80 IPVC-coated polyester weave. Thickness: 0.38-0.48 mm, weight per unit area: 390-560 g/m 2. Type approval certificate 0495 100 kg/m 2 300 kg/m 2 (depending on dimensions, bay width) Certified according to requirements Swedish National Board of Housing, Building and Planning Copyright De Boer www.deboer.com
ALL WEATHER HALL K SIDE HEIGHT RIDEGE HEIGHT WIDTH TECHNICAL SPECIFICATIONS Widths Side heights Ridge heights Bay distance 8m, 10m, 12m, 15m, 20m and 25m 3-6m (8m-12m), 3-8m (15m-25m) Approx. 6m @ 4m side height (10m hall) / Approx. 10.4m @ 5m side height (40m hall) (external measurements) 4m (standard) Doors To your requirement (i.e. personnel doors, overhead doors, roller shutter doors). The hall is built with a door frame of 4x4m in the gable as standard. Frame Hot-dipped galvanised steel (SS-EN ISO 1461) Anchoring Fabric quality (outer layer) Fabric quality (inner layer) Snow loading capacity Wind loading capacity 26 m/s, terrain type 1 Regulations Ground frame or base plates (concrete ring beam, if required) with earth spikes/anchors PVC-coated polyester weave 1100 dtex panama 2/2 binding. Thickness: 0.65-0.75mm, weight per unit area: 870-930g/m 2. Type approval certificate 2382/80 IPVC-coated polyester weave. Thickness: 0.38-0.48 mm, weight per unit area: 390-560 g/m 2. Type approval certificate 0495 100 kg/m 2 300 kg/m 2 (depending on dimensions, bay width) Certified according to requirements Swedish National Board of Housing, Building and Planning Copyright De Boer 2008 www.deboer.com