Customer-oriented high-tech solutions for heating and air-conditioning. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS
Where heat is generated, confidence is created too Special materials are needed to meet special challenges. Particularly in heating and air-conditioning engineering, where gasket and insulation materials as well as expansion joints from Frenzelit make sure that modern industrial furnaces, heating boilers and stoves are able to demonstrate their impressive efficiency both reliably and safely. As the technology leader for gaskets, technical textiles, expansion joints and insulation, we have had years of experience in the development, production and processing of highly temperature-resistant fibres and materials. Our customers in the heating and air-conditioning field benefit from this experience too. And from application know-how that goes far beyond the heating boiler alone: Frenzelit products and materials are used wherever maximum reliability and safety are essential in process industry, machine manufacturing, plant engineering, power generation, shipbuilding or automotive applications. The satisfying feeling of having taken the right decision in choosing a solution made by Frenzelit is generally experienced before installation has even started: because Frenzelit has obtained certification that the company complies with the requirements of both ISO/TS 16949 and ISO 14001. This means complete transparency in all areas and therefore gives our customers a high degree of security. Quality management ISO 9001 ISO/TS 16949 Environmental management ISO 14001 In view of all these good characteristics, it is no surprise that well-known manufacturers have been placing their confidence in us and our products for many years now.
The temperature we feel comfortable at is between - 200 and + 1100 C. Photo: Voller Ernst/Karawahn, Kain High temperature resistance, low heat conductivity, good insulation: insulating and sealing materials and expansion joints from Frenzelit stay cool at extreme temperatures too. Afflerbach Buderus De Dietrich Drever Ebner Feutron Hark Kermi Loos Lurgi Schmid Feuerungstechnik Spartherm Stiebel Eltron Weishaupt Viessmann VKK Standardkessel Köthen Voest Alpine Industrieanlagen Zehnder
Sealing and insulating applications in industrial furnace manufacturing Carburising, case-hardening and carbonitriding as well as inert gas hardening, annealing and galvanising the heat treatment and finishing processes in industrial furnace manufacturing are the acid test for our gasket and insulation materials and our expansion joints. Whether aluminium, non-ferrous metals, ceramics, glass or steel are involved: during heat treatment in tunnel, shaft, batch, pusher, pit or circulation furnaces, in ore processing or in cracking furnaces, materials are required that keep cool even when the temperatures reach 1100 C or higher. Take isotherm as an example: our highly temperature-resistant special glass fibres perform convincingly thanks to their strength and very high heat insulation capacity. Energy and heat losses are reduced to an absolute minimum - over a wide temperature range. Our expansion joints make sure at the same time that this remains true even when sizable movements occur in the equipment e.g. in the sealing of interfaces between different sections of a line, where pipes carrying media enter and where the furnace housing is penetrated for drives, transport rollers and moving measurement sensors. INSULATION isoplan isoglas isotherm isokeram isocomposite Photo: Nabertherm SEALING novaphit novatec novapress isoplan isoglas isotherm isokeram novaseal Fabric/elastomer expansion joints Rubber expansion joints PTFE expansion joints Steel expansion joints and your latest high-temperature application soon.
Heating boilers for industry, single- and multi-family homes A compact oil or gas heating boiler for a single-family home in the country? Or a large boiler with 12000 kw for the office building on the commercial estate? Frenzelit supplies you the right insulation, sealing and expansion joint solution for just about any application and every product configuration. You have a choice where man-, head- and handhole gaskets are concerned: novaseal boiler rings or novaphit, the gasket material made from high-quality expanded graphite. Both product lines are approved for use as boiler gaskets by the German technical control authorities (TÜV). The Frenzelit product portfolio for heating boilers leaves nothing to be desired. As far as product variety is concerned too: from packings for sealing hatches and doors to mats for flue flange sealing. From flexible flue gas expansion joints for eliminating vibration between the boiler and the heat exchanger to steel expansion joints that absorb movements in steam supply lines: we supply you the right product no matter what the application. On request, we can make the heat insulation material isotherm S-Board made from silicate fibre available to you completely ready for installation. Photo: Loos INSULATION isoplan isoglas isotherm isotherm S-Board isocomposite SEALING novaphit novatec novapress isoplan isoglas isotherm novaseal Fabric/elastomer expansion joints Rubber expansion joints PTFE expansion joints Steel expansion joints and your latest application for heating boilers soon. Photo: Viessmann Photos: Buderus Deutschland
Stoves and radiators for residential applications Living room heating systems vary widely, as everyone knows. Frenzelit has the right solution for all of them: oil or chimney stoves, pellet or slow combustion stoves or simple heating elements. And for radiators too. From the fuel supply system to the gas flue, from the ash container to the heat exchanger, from the stove door to the flue gas ventilator: Frenzelit supplies mature solutions to you for the entire process chain. The application temperature limits range from 550 C (isoglas ) to 1050 C (isotherm ST). Flat gaskets for floor and wall radiators round off the extensive programme. Our high-performance fibres for radiant heaters that we have given the name HICOTEC TP are a minor revolution talk to our development consultant about the application you are interested in! Photo: Hark INSULATION isoplan isoglas isotherm isocomposite SEALING novaphit novatec novapress isoplan isoglas isotherm novaseal RADIATORS novapress HICOTEC and your latest application for stoves and radiators soon. Photo: Buderus Deutschland Photo: vario-press / Christoph Papsch
novaphit novatec novapress novaform isoplan isoglas isotherm isokeram novaseal isocomposite Expansion joints
Exactly the right atmosphere thanks to perfect engineering down to the smallest detail We spend about 90 % of our lives in closed rooms: in offices, factories and salesrooms, in cinemas, malls and sports halls, in schools, universities and at home inside our own four walls. Consistent air conditioning of all these rooms helps us to feel comfortable while our ability to concentrate can be increased at the same time. For heating, cooling, humidifying or dehumidifying. For complete or partial air conditioning: Frenzelit products and system solutions guarantee an excellent work atmosphere whatever the context. Our flexible expansion joints, for example, eliminate vibrations caused in air-conditioning systems by the ventilators installed in them. Such important equipment as the heat exchanger for cooling or the compressor that increases the cooling medium gas to a higher temperature and pressure level benefits from this. Flexible expansion joints made by Frenzelit make sure housing gaskets in wind tunnels work safely and reliably. Even a well-known Formula 1 team benefits from this: it is able to optimise the body of its F1 racing car in a wind tunnel as a result. Perfect exact operation has top priority where our flat gaskets are concerned too: novapress FLEXIBLE/815 or metal gaskets seal chilling equipment dependably in this field. As a system supplier, we do not focus exclusively on the details of high-quality individual solutions, however. We are a single, integrated source that provides you a complete package, from engineering and concept planning to the design, production, installation and startup of our expansion joints. Our elastomer expansion joints carry out this function in cold chambers when the pressure levels vary widely too.
SEALING novapress novaform Fabric/elastomer expansion joints Rubber expansion joints PTFE expansion joints Steel expansion joints and your latest air-conditioning application soon. Photo: zefa/digitalvision
At a glance: the Frenzelit product lines for heating and air conditioning novaphit Gasket material made from highquality expanded graphite. Depending on the product configuration, with either one or more expanded metal inserts made from acid-resistant stainless steel (1.4404/316L). Without any bonding and filling agents. Suitable in general for all applications in extreme conditions, including varying loads.the standard solution for the entire plant that guarantees maximum safety. novatec The modern material combinations consisting of engineered graphite with Kevlar are tailor-made for your specific application areas. Their main strengths are excellent temperature and media resistance. Kevlar is a trademark registered by DuPont. novapress Elastomer-bonded flat gasket materials made from aramide fibres and functional fillers from the novapress line are the standard solution in the flat gasket field. They have been developed for individual application areas and are in successful practical use all over the world. novaform The proven product family stands for individual gasket solutions. All-purpose products: as flexible gaskets for certain special applications, as metal gaskets with or without an elastomer coating and/or a coating for high-temperature ranges and as a dispenser and/or screen printing gasket made from flexible material or metal.
isoplan isoglas /isotherm Insulation material based on biologically soluble, mineral or ceramic fibres with excellent heat insulation properties in the high-temperature range up to 1200 C. isokeram Technical textiles based on ceramic staple fibres with a core made from chromium steel wire, which are suitable for applications up to 1100 C. The main features of isokeram are high chemical resistance and very good sealing and insulating properties. The materials for heating engineering. Cords, packings, woven tapes, woven fabrics or needlemats for heat insulation and sealing. isotherm S-Board This strong fibreboard is manufactured from silicate glass fibres with organic and inorganic bonding agent systems. The application temperature limit is 1100 C. E-glass or silicate glass fibres with a defined diameter are the basic material. The isotherm S/ST products in this line can be used up to temperatures of 1050 C. The main features of isotherm S- Board are physiological harmlessness, easy processability and simple handling. novaseal isocomposite Hand-, head- and manhole gaskets for boilers and tanks in an oval shape.thanks to the special contraction properties, the gasket is particularly good at adapting to uneven surfaces. novaseal gaskets comply with TRD 401 requirements. Expansion joints Customised solutions for absorbing vibration and movement in industrial plant engineering. Expansion joints are needed to absorb movements and vibrations. Aggressive media and HICOTEC Ultra-light. Ultra-flat. Tiny carbon fibres as conductor paths that convert electricity into heat. Thousands of them in a minute space. The result: HICOTEC TP Thermal Power with revolutionary properties for radiant A defined composite material made from isotherm 1000 and isoglas needlemats. isocomposite needlemats are an extremely efficient and economic insulation material that has been extreme temperatures need to be controlled too. From flexible and elastomer expansion joints for absorbing movements with minimum adjustment forces to rubber, steel and heating. For a wide range of very different applications and industries. HICOTEC TP combines electrical/heat functions with the fibre-reinforcement properties of carbon fibres. Specifically adjustable surface resistance levels of specially developed for heating engineering.thicknesses between 10 mm and 75 mm are available. PTFE expansion joints, which cope with high pressure levels and liquid media too. The right product for every application. 1 to 300 Ω/sqr, for electrical voltages of 4 to 400 V and electrical capacities of up to 0.8 W/cm 2 make the material suitable for many different industrial and private radiant heating applications.
Warming to a good idea: partnership with Frenzelit Be honest: when was the last time you really warmed to a good idea? A partnership with Frenzelit gives you the chance to optimise proven solutions and to get new ideas to the series production stage faster. We liaise very closely with our customers in our role as a system supplier. We supply completely pre-assembled insulation matting directly to well-known furnace manufacturers' assembly lines ready for immediate installation, for example. The mats are punched or cut by water jets and are fitted by us with metal plugs too in some cases. We also produce and package completely pre-assembled spare part kits for fitters, however, consisting of Frenzelit materials as well as attachment materials and installation accessories. The advantage you have: you do not just benefit from our know-how, our own research laboratories and our decades of experience as a comprehensive system supplier for many different industries and applications. We also give you an opportunity to access the unique skills of our pool of roughly 450 employees around the world. Ideas go into series production in this network, across industry and national borders and reach our worldwide customers just in time thanks to a perfectly organised, efficient logistic system. From Norway to Malta. From Portugal to Saudi Arabia. From Brazil to South Korea. Make sure you enjoy the synergy effects of a system partnership with Frenzelit as well: from prefabricated components to completely pre-punched gasket samples. For a limited period of time and as long as you want. You decide the framework in every individual case. We help excellent products to be made from excellent materials in this way. We are there whenever you need us. All over the world.
Background photo: zefa/c. Tremblay Do you have any questions about your application? The heating and air conditioning information service will help you: heating-technology@frenzelit.de
FL/1/05.05/015/FL Cover photo: Viessmann All previous versions of this prospectus cease to apply. Subject to technical amendment. GASKETS TECHNICAL TEXTILES EXPANSION JOINTS INSULATION NEW MATERIALS Frenzelit-Werke GmbH & Co. KG P.O.Box 11 40 95456 Bad Berneck Germany Phone: +49 9273 72-0 Fax: +49 9273 72-222 info@frenzelit.de www.frenzelit.com