Edition 06 / 20 2012 Germany GmbH Manufacturer HEA OFFICE MANUFACTURER Mergenthalerallee 25 #507-8, Center, #507-8, Geoje3-dong, Geoje3-dong, Yeonje-gu 8th F. WorldMeridian Venture CenterⅡ, 426-5, -65760 Gasan-dong, Eschborn Geumcheon-gu, Seoul, Korea Busan, Busan, Korea Korea. Zip: Zip_ 611-804 611-804 Tel: tel_ 82 +49 2 2016 (0) 617000, 96 / fax_ 777 82 552-016 7001 Tel: +82 tel_ 5182 850 51 25 850 00 2500 www.osstem.com homepage_ http://www.osstem.com Fax: +82 fax_ 51 82 861 51 861 46 4693 www.sinuskit.com
Implant Implant for Narrow Ridge Implant for This implant is is suitable for for a narrow a narrow ridge, ridge, such such as the as lower the lower This implant is for immediate provisional prosthetics for Fixture and abutment are are combined to withstand to withstand chewing chewing pressure pressure and Micro and thread Micro design thread was adopted design was to increase adopted chewing to increase power. chewing RBM surface power. was adopted for quick osseointegration. Neck can bent for correct insertion. RBM The shape surface and was the size adopted of abutment for quick part were osseointegration. optimized to enable Titanium provisional cap and ab analog enable easy The prosthetics shape without and the cutting. size of abutment part were optimized to enable prosthetics cap increases without the convenience cutting. of manufacturing cap increases the convenience of manufacturing immediate cap prosthetics. and lab analog enable a sophisticated restorative cap and lab analog enable a sophisticated restorative cap helps manufacturing prosthetics chair side. Ø2,5/ 3mm Abutment design for manufacturing dental Narrow neck design for an Micro thread design for for an an increase of of initial initial and and long-term stability. stability. Ø1,8/ 2,5mm Neck design to corrects the direction Connection of enture river which can be used when the neck when is the fractured neck is fractured Threaded body design for an increase of of Threaded body design to to increases initial stability Inplant Implant IMPANT
Implant Implant for Narrow entureridge Mechanical Implant rilling for Power according to the Neck esign enture-type This implant is implant suitable is for for a edentulous narrow ridge, patients such as with the narrow lower ridge anterior for region. those cases in which a standard implant is not possible. Fixture and abutment are combined to withstand chewing pressure enture RBM surface micro was thread adopted in the for upper quick distributes osseointegration. chewing pressure throughout The shape and bone the structure size of abutment making part it suitable were optimized for an immediate to enable prosthetics without placement. cutting. cap increases the convenience of manufacturing enture immediate retainer prosthetics. and lab analog allows easy and convenient denture manufacturing. cap and lab analog enable a sophisticated restorative Purpose This implant is for immediate provisional prosthetics for Combined partially and fixture completely and abutment-shaped edentulous patients. design enables implantation in a narrow ridge such as lower Research on the effectiveness of narrow neck and safety of soft tissue is on going and new designs including platform switching Neck can have bent been for correct invented. insertion. The effectiveness of narrow neck seems unclear. Therefore, fatigue stress and cycle-durability tests were conducted for each neck design. Titanium provisional cap and ab analog enable easy Materials manufacturing & Method of provisional prosthetics. Three test implants were made according to diameter and materials in neck areas. 5 test implants were manufactured per test. ISO14801 setting was arranged under the condition of 0N 30 5Hz 200,000 cycles. Additionally fatigue tests were conducted. Neck iameter Ø2,5/ 3mm Ball shape is suitable for o-ring attachment Abutment design for manufacturing dental Available in 2 or 4mm to account for gingival height O-Ring Retainer Set Contrast Competitor A cap helps manufacturing prosthetics chair side. Neck iameter 2.3 1.7 2 Materials Cp Gr-5 Cp Gr-5 Cp Gr-4 Neck design to corrects the direction Connection of enture river which can be used Narrow neck design for an Micro threaded design is devised to improve initial bonding Micro thread stability. design for an increase of Test Results All the test results show that implant is superior to others in terms of endurance and resistance against fatigue and torsion resistance. {, Contrast, Competitor A} (N) (N) Threaded body design increases initial stability Threaded body design for an increase of Competitor A Threaded body design to increases initial stability Contrast Results of Fatigue Test () (Contrast) (Competitor A) S-N Curve 04 Inplant Implant IMPANT 05
Implant Analysis Implant of Initial for Narrow Stability Ridge According to Body esign Implant for Components Purpose This implant is suitable for a narrow ridge, such as the lower To analyze the internal stress diversion of mini implant (the diameter anterior of region. fixture is less than 3mm) through FEA. Fixture and abutment are combined to withstand chewing pressure Materials & Method Five categories of implants were developed in different settings RBM of pitch, surface bone was depth adopted and for micro quick osseointegration. thread. An analysis on internal stress diversion was done under the loading condition of The 0N shape in and 30 the size of abutment part were optimized to enable *FEA: Finite-Element Analysis *ASTM: American Society of Testing Materials *ANSYS: Engineering software for FEA *ANOVA: Analysis of Variance Macro Thread Micro Thread [ Indications Pitch ] epth Pitch epth 0.8 0.35 0.8 0.25 Sample(A) 1 0 0.4 None Sample(B) 0.5 0.2 None Unit : mm cap increases the convenience of manufacturing cap and lab analog enable a sophisticated restorative Sample(A) Sample(B) Abutment design for manufacturing dental Test Results Pull-out and Push-out test show that implant has better results compared with Sample A and Sample B. FEA results show Narrow neck design for an that implant has the highest internal stress diversion. Micro thread design for an increase of Results of Pull-Out Test Results of FEA F This implant is for immediate provisional prosthetics for Implant (Narrow ridge) Neck can bent for correct insertion. Titanium provisional cap and ab analog enable 7 easy 3 3.0 3 7 2.5 P253R P251R P253R P253R 3.0 2.5 P3R P304R P301R P30114R P303R P304R P303R P304R A mini implant that is adequate for narrow space such as the mandibular anterior jaw One-body implant with micro thread design enhances the destribution of masticatory force RBM surface treatment enables fast osseointegration Optimized cap helps shape manufacturing and size of abutment prosthetics enables chair cutting-free side. prosthetic work Optimal design of body, thread, and drills to enhance initial bonding and bone penetration Packing unit : Implant (Narrow ridge) Neck design to corrects the direction Connection of enture river which can be used P254R P25114R P254R P254R (N) 600 500 400 300 200 0 0 Sample(A) Sample(B) Type A : Implant Narrow Ridge Type Threaded body design for an increase of Unit:Mpa Sample A Sample B Maximum Torque 26.6 33.2 35.1 (Narrow ridge) PIC Threaded Use body for design precise to impression increases work initial stability In case of non-modification of abutments : After taking an impression using an impression cap, make the prosthesis after creating a model using an analog In case of modification of abutment height only: After taking an impression using an impression cap, create a model using an analog and make the prosthesis by modifying the model shape according to the modification of abutment Packing unit : cap 06 Inplant Implant IMPANT 07
Implant Implant for Narrow Ridge Implant for (Narrow ridge) This implant is suitable for a narrow ridge, such as the lower PTC Use for making Fixture temporary and abutment prosthesis are combined to withstand chewing pressure One-touch locking design Packing unit : (Narrow ridge) RBM surface was adopted for quick osseointegration. The shape and the size of abutment part were optimized to enable cap increases the convenience of manufacturing cap and lab analog enable a sophisticated restorative This implant is for immediate provisional prosthetics for Implant () 1.8 1.8 T184 T184 Neck can bent for correct insertion. T184 Titanium provisional cap and ab analog enable easy ab [ Indications Analog ] (Narrow ridge) PA Make an Implant (narrow ridge) abutment of the oral cavity onto a working model Packing unit : T254 T254 T254 Abutment design for manufacturing dental Narrow neck design for an Micro thread design for an increase of Implant cap helps to be used manufacturing for the immediate prosthetics mounting chair of side. temporary prosthesis for completely or partially edentulous patients Neck designed for path compensation and intensity support Simple system to make temporary prosthesis using titanium provisional caps and lab analogs Neck design to corrects cap facilitating the direction prosthetic work chair side Rectangular structure at the bottom of the neck facilitates easy removal of Connection provisional of enture implant river which can be used when the Optimized neck is fractured design of body, thread, and drilling to enhance initial bonding and bone penetration Packing unit : Implant () () TPC Use for making temporary prosthesis (Titanium) Packing unit : Threaded body design for an increase of () Threaded body design to increases initial stability TA Make an Implant (provisional) abutment of the oral cavity on a working model Packing unit : 08 Inplant Implant IMPANT 09
Implant Implant for Narrow Ridge anterior region. 252R 25112R 2.0 25114R KIT Neck can bent for correct insertion. The shape and the 252R size of abutment part were optimized to enable 254R 25112R 25114R prosthetics without252r cutting. 254R Titanium provisional cap and ab analog enable easy 252R 254R 3.0 of cap increases the convenience manufacturing immediate prosthetics. 2.0 3R 3.0 304R cap and lab analog enable a sophisticated restorative 3.0 3.0 30112R 2.0 30114R 302R 3R 304R 304R 302R 30112R 304R 30114R bone; more advantageous for immediate prosthetic mounting edentulous patients or if regular implant is inappropriate Easy and convenient denture work through the use of retainers Micro thread on top helps distribute masticatory pressure to the and lab analogs bone; more advantageous for immediate prosthetic mounting Ball-type structure for the connection of the O-ring attachment Easy and convenient denture work through the use of retainers Use by selecting 2/4mm depending on the gingival height Abutment design for manufacturing dental and lab analogs Packing unit : anterior Implant (enture) ceramics in lower teeth enabling Ball-type structure for the connection of the O-ring attachment immediate placement. Use byprosthetics selecting 2/4mm depending on the gingival height Packing unit : Implant (enture) alveolar rill Torque river Machine river Spare rill Torque river Machine river Spare O-Ring Retainer Set O-Ring Retainer Set Name Micro thread design for an increase of Retainer cap set initial ando-ring long-term stability. Nameset O-ring O-ring Retainer cap set for making stud-type overdenture O-ring set Packing unit : Retainer + O-ring Use (enture) (enture) rivers for the Narrow Ridge and types (4types) - Machine ong(narrow Ridge) rivers forriver the Narrow Ridge and types -(4types) Torque river ong(narrow Ridge) -- Machine (enture) Machine river river Short ong(narrow Ridge) Torque river river ong(narrow Short (enture) -- Torque Ridge) - Machine river Short (enture) 1 set of 3river Short (enture) - Torque - Parallel Pin - river 1 set of Separator 3 epth Gauge -- Parallel Pin - river Separator Components (optional) - epth Gauge 1 set of 3 types of drivers for denture 1 set of 2 other types - Machine river Short(Narrow - Torque Handle KIT Components (optional) Ridge) -1 Torque -1 Torque set of 3river typesshort(narrow of drivers forridge) denture set of 2Wrench other types cap helps manufacturing prosthetics chair side. Handle -- Torque river ong (enture) Machine river Short(Narrow Ridge) - Torque - Torque river Short(Narrow Ridge) - Torque river ong (enture) - Torque Wrench Narrow Ridge Type : No hole on the head Narrow Ridge Type enture Type enture Type : A hole on the head RCS01 OAON01S RCS01 rill for Implant OAON01S Name 1.5mm ance rill rill for Implant Use for making stud-type overdenture Packing unit : Retainer + O-ring Threaded body design for an increase of self tapping and initial stability Components (basic) -5-drill 1.5mm set ance rill - 1.8mm Twist rill ong -- 1.8mm 1.5mm Twist ancerill rillshort 2.3mm Twist Twist rill rill ong ong -- 1.8mm -- 2.3mm 1.8mm Twist Twist rill rill Short Short Connection enture river which can be used enture Type Narrow of Ridge Type iscemment Torque rivers enture Type : A hole on the head Narrow neck design for an KIT Neck design to corrects the direction iscemment Torque rivers Narrow Ridge Type : No hole on the head (basic) 5-drill set KIT Micro thread on top helps distribute masticatory pressure to the alveolar enture-type implant can be used in case of narrow ridge width for OK implant can be used 302R 304R in case of narrow ridge width for patients or if regular 302R edentulous implant is inappropriate304r Implant KIT - 2.3mm Twist rill ong - 2.3mm Twist rill Short enture-type OK KIT Components Implant KIT RBM surface was adopted for quick osseointegration. 252R 254R 252R 254R 254R KIT ( KIT) 2.0 Fixture and abutment are combined to withstand chewing pressure Implant (enture) This implant is for immediate provisional prosthetics for This implant is suitable for a narrow ridge, such as the lower Implant (enture) Implant for A Make an Implant (denture) abutment of the oral cavity on a working model A Packing unit : an Implant (denture) abutment of the oral cavity on a working model Packing unit : 8 ance rill Twist rill ance rill Twist rill 1.5 35 OS 42 OS18 35 32 OS OS18S Name rill ong 1.8mm Twist 1.8 Threaded body design increases stability 1.5mm ance 1.5 1.8mm Twisttorill Short initial 1.8 Make 8 1.8mm 2.3mm Twist rill ong 1.8 2.3 42 OS18 OS23 1.8mm 2.3mm Twist rill Short 1.8 2.3 32 OS18S OS23S 2.3mm mm Twist rill ong 2.3 42 OS23 OS25 2.3mm mm Twist rill Short 2.3 32 OS23S OS25S 42 OS25 abmarking Analog specification as implant length for easy identification ; laser mm Twist rill Short 32 OS25S on 8////mm.For lance drilling, drilling only the cortical bone is mm Twist rill ong Same recommended; enables drillinglength up to the laser identification marking line depending on Same specification as implant for easy ; laser marking the surgeon's work environment on 8////mm For lance drilling, drilling only the cortical bone is recommended; enables drilling up to the laser marking line depending on the surgeon's work environment Inplant Implant IMPANT IMPANT 11 Inplant IMPANT 11
Implant Implant for Narrow Ridge Warnings Implant & for Procedures river for Narrow Ridge & Type river for enture type Torque river Machine river This implant is suitable for a narrow ridge, such as the lower Name Fixture and abutment are combined to withstand chewing pressure Torque river (Short) 3.4 16.5 PTS Torque river (ong) 3.4 21.5 PT Machine RBM river surface (Short) was adopted 3.4for quick osseointegration. 24.4 P Machine The river shape (ong) and the size 3.4 of abutment part 29.4 were optimized PM to enable Special-purpose prosthetics driver without for Implant cutting. (Narrow Ridge and ) The triangle mark is used cap by increases aligning the driver convenience with the implant of manufacturing cross section cap and lab analog enable a sophisticated restorative Name Torque river (Short) 3.8.5 TS Torque river (ong) 3.8 18.5 T Machine river 3.8 21.4 Special-purpose driver for Implant (denture) The triangle mark is used by aligning the driver with the implant cross section This implant is for immediate provisional prosthetics for How to separate driver when pinching occurs during insertion Neck can bent for correct insertion. Titanium provisional cap and ab analog enable easy river Separator Insert river separator into the hole and lift up the driver Implant by ever Principle How to recover Type Path Correct the Path by using epth Gauge. Fracture of Implant Neck can be occurred in excessive bending. Torque river Machine river Abutment design for manufacturing dental cap helps manufacturing prosthetics chair side. Gauge for Implant epth Gauge immediate prosthetics Name placement. epth Gauge G Parallel Pin PP epth gauge Narrow eft neck : For depth design checking for an upon drilling increase Right of : Use gingival for stability implant bending The parallel pin is used for path checking upon drilling. Micro thread design for an increase of Neck design to corrects the direction Connection of enture river which can be used How to remove implant when fracture occurs in Type Parallel Pin Torque Handle TH Use for manual torque after connecting to the connected part of a torque Threaded driver body design for an increase of Threaded body design to increases initial stability enture river Type implant with fractured neck river Separator S In case a driver is stuck during implantation, the river Separator helps remove the driver based on the lever principle (inserting river Separator into the driver groove) When the neck fractures. Connect denture driver to provisional implant. Rotate the driver counter-clockwise to remove 12 Inplant Implant IMPANT
Implant Warnings Implant & Procedures for Narrow Ridge Product Implant Information 1. Push the dotted line at the top of the This implant is suitable for a narrow ridge, such as the lower This implant is for immediate provisional prosthetics for package with hands. The package includes a implant, manuals, and chart stickers. Fixture and abutment are combined to withstand chewing pressure 42mm Neck can bent for correct insertion. The laser markings indicate the length of implant RBM surface was adopted for quick osseointegration. The shape and the size of abutment part were optimized to enable 35mm 32mm Titanium provisional cap and ab analog enable easy cap increases the convenience of manufacturing mm 2. The implant is sterilized before it is placed into the blister package. iameter, length, product code cap and lab analog enable a sophisticated restorative mm number and ot number are written on the back of the package.. Abutment design for manufacturing dental iameter of implant and final drill cap helps manufacturing prosthetics chair side. 3. Remove the cap and the abutment part is exposed. Align the arrow mark on the driver with the cross section of the implant when you connect it. If a secure connection is not made, try again. Narrow neck design for an Micro thread design for an increase of Final rill Implant iameter Interference Recommandation 1.5 1.8 - rilling the length of cortical bone Neck design to corrects the direction 1.5~1.8 0.35~0.5 rilling the length of the implant 1.8~2.5 3.0 0.35~0.6 rilling the length of the implant Connection of enture river which can be used ** The harder structure is, the larger the diameter of final when drill the should neck be. is fractured rill depth Interference Implant diameter 4. Take the implant out of the ampule and move it cautiously as the picture shows. Avoid contact with any objects and dropping the implant. Threaded body design for an increase of river selection guide according to location ocation How to use Recommendation Threaded body design to increases initial stability In case of hight crown Engine ong Type river (Anterior teeth) Hand ong Type river In case of narrow osslusal space (Posterior teeth) Engine Hand * Recommendations : 25 rpm, 30Ncm ( 1.8 : 25Ncm) Short Type river Short Type river 22mm 20mm 17mm mm Anterior teeth Posterior teeth 14 Inplant Implant IMPANT
Implant Recommended Implant for Surgical Narrow Ridge Procedure Implant Prosthetic for Procedure for Narrow Ridge Implant ( / 3.0) _ Recommended insertion torque This : 30Ncm implant is suitable for a narrow ridge, such as the lower Fixture and abutment are combined to withstand chewing pressure RBM surface was adopted for quick osseointegration. The shape and the size of abutment part were optimized to enable cap increases the convenience of manufacturing cap and lab analog enable a sophisticated restorative Step This 1 implant : is for immediate Restoration provisional prosthetics for 1. partially Check vertical and completely height, and edentulous path after patients. implant insertion. (Remove upper part of implant, using irrigation, Neck if adjustment can bent is for necessary.) correct insertion. 2. Titanium Fabricate provisional and place cap provisional and ab analog prosthetics enable by easy using manufacturing temporary cap. of provisional prosthetics. Make adjustment considering length of upper marking line, and accurate prosthetics manufacturing using lab analogue is possible. Shaping individual margin is possible in the 3mm margin area of the implant. Step 2 : & Working Cast [ When abutment is not made ] 1. Place an impression cap on the implant. cap helps manufacturing prosthetics chair side. ance rill 800rpm Check Path Abutment design for manufacturing dental 1.8 rilling / ceramics in Check lower epth anterior teeth enabling Engine Mode : 30Ncm 2.3 rilling / Manual Mode : ess than 70Ncm 2.5 rilling ( Type : ess than 40Ncm) 1200rpm Implant ( 1.8) _ Recommended insertion torque : 25Ncm Narrow neck design for an Micro thread design for an increase of Separate river 2. Take an impression 3. Send impression and lab analog to lab for manufacturing of prosthesis When the abutment is modified. Take a direct impression. Send to lab for manufacturing of prosthesis Neck design to corrects the direction Connection of enture river which can be used When only abutment height was adjusted. Place an impression cap on implant. Threaded body design for an increase of Take an impression, send impression and lab Threaded body design to increases initial stability analog to lab for manufacturing of prosthesis Step 3 : Setting ance rill 800rpm Only cortical bone with irrigation Engine Mode : 25Ncm Manual Mode : ess than 40Ncm Separate river Place prosthesis in mouth check occlusion Caution :In Type, insert the implant by using Torque Handle(TH), otherwise, fracture of neck may be occurred when more than 40Ncm of torque value is reached. 16 Inplant Implant IMPANT 17
Implant Implant ImplantProsthetic for NarrowProcedure Ridge for Step 1 This implant is suitable for a narrow ridge, such as the lower Manufacture a temporary prosthesis on the model. Implant Implant for Prosthetic Procedure for denture implant for immediate provisional prosthetics for A.This For newisdenture Fixture and abutment are combined to withstand chewing pressure Step 1 Step 2 NeckO-ring can bent insertion. Insert in for thecorrect Retainer, place the retainer on the Insert Implant between the implants. RBM surface was adopted for quick osseointegration. The shape and the size of abutment part were optimized to enable Ball Head exposed in the mouth and take an impression. Titanium provisional cap and ab analog enable easy Step 3 manufacturing of provisional prosthetics. Step 2 Check and control the Path of Implant. cap increases the convenience of manufacturing Connect to the retainer in the impression Step 4 cap and lab analog enable a sophisticated restorative Step 3 Confirm the space where can be inserted After manufacturing the working model, remove the on the temporary prosthesis. Retainer from the impression according to the general rules. Step 5 Step 4 Connect in the mouth. Using the completed working model, manufacture enture according to the general rules.. Step 6 cap helps manufacturing prosthetics chair side. After covering with a Rubber am, connect Abutment design for manufacturing dental Step 5 and temporary prosthesis using Resin. Check the insertion points of the denture Neck design to corrects the direction Step 7 Step 6 Remove the surplus resin and adjust occlusion after Resin Connection Push the O-ring through the rubber dam. Insert the o- of enture river which can be used hardens. ring into the retainer. Attach the retainer to the o-ring Narrow neck design for an Set the temporary prosthesis using Cenment. Micro thread design for an increase of abutment. Step 7 Inject Resin into the Hole formed on enture and remove the surplus after Resin has hardened. Step 8 Threaded body design for an increase of Threaded body design to increases initial stability Check the bearing and occlusion status. 18 Inplant Implant IMPANT IMPANT 19
Implant Implant Implant ImplantProsthetic for NarrowProcedure Ridge for denture B. Using existing denture Implant for Clinical Application using Implant This implant is suitable for a narrow ridge, such as the lower This implant is for immediate provisional prosthetics for Fixture and abutment are combined to withstand chewing pressure Step 1 Considering Path, insert Implant according to the set surgery procedure. RBM surface was adopted for quick osseointegration. Neck can bent for correct insertion. The shape and the size of abutment part were optimized to enable Titanium provisional cap and ab analog enable easy Step 2 After checking the location of insertion, form the Hole on cap increases the convenience of manufacturing the existing denture. cap and lab analog enable a sophisticated restorative Step 3 Connect Rubber am and then connect Ball Head by inserting O-Ring with weak bearing into the Retainer. Step 4 Inject Resin after setting the existing denture formed Hole. Remove the surplus part after Resin has hardened. Step 5 Check the bearing and occlusion status. cap helps manufacturing prosthetics chair side. Abutment design for manufacturing dental Neck design to corrects the direction Narrow Ridge PatientCondition: narrow Final Narrow neck design for an Micro thread design for an increase of rill : 1.8 Implant ridge Connection of enture river which can be used : x.0mm Bone Type : 3 Torque Value : 17Ncm Threaded body design to increases initial stability Threaded body design for an increase of 20 Inplant Implant IMPANT IMPANT 21
Implant Implant Implant for Narrow Ridge Clinical Application using Implant Implant for Clinical Application using Implant This implant is suitable for a narrow ridge, such as the lower This implant is for immediate provisional prosthetics for Fixture and abutment are combined to withstand chewing pressure Neck can bent for correct insertion. RBM surface was adopted for quick osseointegration. The shape and the size of abutment part were optimized to enable Titanium provisional cap and ab analog enable easy cap increases the convenience of manufacturing cap and lab analog enable a sophisticated restorative cap helps manufacturing prosthetics chair side. Abutment design for manufacturing dental Narrow Ridge Narrow Ridge PatientCondition: PatientCondition: No more increase in bone volume Final rill : 1.8 Implant : x.0mm x.0mm tooth extraction 2 weeks before surgery Narrow neck design for an Micro thread design for an increase of Final Neck design to corrects the direction Connection of enture river which can be used rill : 1.8 Implant : x.0mm Bone Type : 3 Bone Type : 3 / Ncm Torque Value : 17 Threaded body design to increases initial stability Threaded body design for an increase of 22 Inplant Implant IMPANT IMPANT 23
Implant Implant Implant for Narrow Ridge Clinical Application using Implant Implant forsterilization Washing and This implant is suitable for a narrow ridge, such as the lower Thisto implant is for&immediate provisional prosthetics for How maintain Store surgical instruments partially and completelysurgical edentulous patients. should be soaked in sterilizing solution to prevent hardening of the blood. Wash 1.Right after procedure, instruments Fixture and abutment are combined to withstand chewing pressure with running or distilled water to completely remove blood and other remaining objects. Neck can bent for correct insertion. RBM surface was adopted for quick osseointegration. 2. ry with paper towel or heater. Put the instruments in sterilizing kit, and sterilize them for minutes at 5 in Autoclave. The shape and the size of abutment part were optimized to enable Titanium cap and ab dry analog Keep theprovisional sterilized instruments andenable store. easy cap increases the convenience of manufacturing cap and lab analog enable a sophisticated restorative cap helps manufacturing prosthetics chair side. Soak surgical instruments in sterilization solution and wash in distilled or running water, Abutment design for manufacturing dental Neck design to corrects the direction Narrow Ridge Connection of enture river which can be used PatientCondition: No more increase in bone volume Final rill : 1.8 / 2.3 Implant : x.0mm 3.0 x.0mm Remove water and disinfect for minutes at 5 in Autoclave. Narrow neck design for an Micro thread design for an increase of Bone Type : 3 Threaded body design to increases initial stability Threaded body design for an increase of 24 Inplant Implant IMPANT IMPANT 25
Cautions Cautions Implant Surgical Implant Procedure for Narrow Ridge How Implant to Maintain for Surgical KIT This implant is suitable for a narrow ridge, such as the lower The operator must check the following items before starting the surgery. Fixture and abutment are combined to withstand chewing pressure Patient's condition RBM surface was adopted for quick osseointegration. Sufficient bone volume and quality prior to treatment etailed health status The shape and the size of abutment part were optimized to enable Smoking and/or drinking habits prosthetics Masticatory without cutting. pattern and habit Status of oral hygiene cap Psychological increases the convenience state of manufacturing Patient's understanding of implant surgery cap and lab analog enable a sophisticated restorative Treatment Plan iscuss treatment options with your patient. Include the pros and cons of each treatment as well as the procedure involved. This implant is for immediate provisional prosthetics for 1 uring surgery, be sure to keep used tools in saline or distilled water. Neck can bent for correct insertion. Titanium provisional cap and ab analog enable easy 2 Rinse tools with distilled or running water to remove all blood and debris. 3 Alcohol wash all tools used in surgery Caution: o NOT use hydrogen peroxide *Exposure to hydrogen peroxide may cause discoloration to laser markings and/or TiN coating 4 Remove all moisture with a dry cloth or warming fan Abutment design for manufacturing dental Medical iagnosis Check the patient s health history before implant surgery. iscuss the treatment plan and health history with the patient s primary care physician before performing surgery. Narrow neck design for an Micro thread design for an increase of Improper upper/lower posterior height Improper lower anterior width Extremely poor bone quality Congenital or acquired heart conditions Ischemic heart patient (angina, myocardial infarction) High blood pressure Patient s distrust of implant treatment Pay Particular Attention to the Following during an Implant Procedure Threaded body design for an increase of Precautions 5 Replace cap helps dried manufacturing tools into the prosthetics Kit case chair side. (Refer to the color-coding for easy placement.) Neck design to corrects the direction 6 Autoclave Kit for minutes at 2, then store at room Connection temperature. of enture river which can be used Immediately after surgery separate, wash and store all tools. Re-sterilize Kits prior to surgery (2 for minutes) Hanaro All drills Kits and have drivers a 1 year are recommended product Threaded warranty body for (after up design to opening); 50 to uses. increases all drills initial and drivers stability are recommended for up to 50 uses. 26 Inplant Implant IMPANT 27