SMS PASSCODE 2014
This is a Tech Guide for engineering staff installing SMS PASSCODE with a Moxa Nport Ethernet to Serial connectivity converter enabling network-connected modems. Setting up Static IP adress First, connect the Moxa Nport to your network. Once connected, you can locate the Moxa Nport with the Nport Search utility which can be found here: http://www.moxa.com/support/download.aspx?d_id=1358 Click Search. Side 2 af 16
Once you find the device, you need to assign a static IP address to the Moxa Nport by using the Assign IP function. Moxa Nport settings in the Moxa Nport Web Administration interface. You can now access the Moxa Web administration web site. The website s url is the IP address of the Moxa device. Login using admin as username and nothing (blank) as password or refer to the manual for username/password. Once logged in you can change the username and/or the password. Side 3 af 16
We recommend upgrading to the newest released firmware. You can find this at Moxa s web site. In the Basic settings, you have the possibility to set the correct time zone. This is optional. Side 4 af 16
Please make sure that the IP address is set as static. Use Secure for encrypting communication between the Moxa Nport unit and the Nport windows driver. This option is optional, but highly recommended if communication leaves the LAN. P1 to P8 are Ports. This may vary depending on the model you have bought. It is possible to apply the settings to all ports at the same time. Side 5 af 16
You can leave the baud rate at 115200. SMS PASSCODE and the MOXA Nport device will auto negotiate a Baud rate at 9600. Please disable data buffering. Side 6 af 16
Please verify the settings if you are using encryption. Side 7 af 16
Now please save the configuration Nport windows driver Please download the latest Nport Windows driver from Moxa. When you start the Nport then please right click and choose run as administrator. Select Add. Side 8 af 16
Configure the port as follows: The Nport IP address: The IP address of the Moxa Nport, Data port: 950 and Command port: 966. Total Ports: The number of ports on your MoxaNport Click ok Click Yes. Side 9 af 16
If you have enabled data encryption in the Moxa Nport Web administration Interface, then you should also enable data encryption in the Nport windows driver. Mark all the com ports in your Nport Windows Driver. Click on Setting. Navigate to the security pane and enable Data encryption, and click OK. Side 10 af 16
Now please click Apply Once processed, your new com ports are ready to use. Side 11 af 16
You can verify this in the device manager as shown below: Side 12 af 16
FAQ Q: How can I measure the signal strength? A: If you have a program like hyperterminal or PuTTY, you can talk with the modem. Connnect to the modem and use this command: at+csq This command will tell you the modem signal strength. Please remember that the modem only can handle one connection per COM-port. You can see this in the SMS PASSCODE web Administration Interface in the monitoring section. Q: I have measured my signal strength. What does the value indicate? A: The signal strength is measured in a scale from 0 31, where 31 is the best result. If your modem returns the value 99, it is an indication of an error with the connection to the modem. Signal Strength above 20 is excellent. Signal strength between 15 and 20 might cause problems such as disconnects or low throughput. With a signal strength below 20% we recommend that, you move the antenna to a location with better signal strength (or reconsider GSM network supplier). Q: I don t have PuTTY or HyperTerminal A: Microsoft used to have HyperTerminal built into their operation system, but in newer releases, HyperTerminal has been left out. Instead, you can use Putty which is a freeware tool. 32 bit version of PuTTY The PuTTY homepage is here: http://www.putty.org/ The PuTTY download page is here: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html 64 Bit version of PuTTY https://splunk.net:444/page/putty_64bit Q: My modem is black listed. How do I get it white listed Side 13 af 16
again? A: Your modem has been black listed, because it has not responded in a timely fashion 3 times. To white list your modem, please restart the transmitter service. Please check the event-log to search for the reason why the modem has not responded 3 times. Q: How do I connect to the modem, or test the connection to the modem? A: In order to test the connection to the modem, you must have a program like HyperTerminal or PuTTY. In this example, your modem connects to COM4. Your must make sure that no other programs is connected to COM4. Remember to stop the transmitter service, if SMS PASSCODE is using COM4. Open PuTTY (se picture below). 1) Select Serial as connection type 2) Write COM4 (or the com port your are using) 3) Click on open Side 14 af 16
A window should open (blank), and you can type now. Try to write ATI, and the modem should respond with what kind of modem it is. Example: If the modem does not respond, you do not have connection with the modem, or the modem is blocked by another connection. Side 15 af 16
Q: how can I set another pin code on my SIM card. A: There are two ways of changing the pin code on your SIM card (or removing the pin code). 1) You can take the SIM card out of the modem and plug it into a mobile phone. Just follow your regular PIN setting like you are used to. 2) You can open a terminal connection to the modem, and use AT commands to change the pin code. AT commands is mostly alike from one product to another product, but in rare cases they can be slightly different. Please refer to your manual for specific AT commands for changing the pin code. If you are not comfortable with AT commands we recommend that you use are mobile phone to change the pin code. Please note that if you have made three faulty attempts to change the pin code, you will need to enter the PUK code. Q: which AT commands should use for test purpose A: There are no specific commands for test, but here are a couple of suggestions that do not make any modifications: ATI AT+CSQ AT&V Status (Manufacturer, Model, Revision, IMEI, capabilities) Returns signal strength Status About SMS PASSCODE SMS PASSCODE is the leading technology in two- and multi-factor authentication using your mobile phone. To protect against the rise in internet based identity theft hitting both consumers and corporate employees, SMS PASSCODE offers a stronger authentication via the mobile phone SMS service compared to traditional alternatives. SMS PASSCODE installs in minutes and is much easier to implement and administer with the added benefit that users find it an intuitively smart way to gain better protection. The solution offers out-of-the-box protection of standard login systems such as Citrix, Cisco, Microsoft, VMware View, Juniper and other IPsec and SSL VPN systems as well as web sites. Installed at thousands of sites, this is a proven patent pending technology. In the last years, SMS PASSCODE has been named to the Gartner Group Magic Quadrant on User Authentication, awarded twice to the prestigious Red Herring 100 most interesting tech companies list, a Secure Computing Magazine Top 5 Security Innovator, InfoSecurity Guide Best twofactor authentication, a Citrix Solution of the Year Finalist, White Bull top 30 EMEA companies, a Gazelle 2010, 2011, 2012 and 2013 Fast Growth firm and a ComOn most promising IT company Award. For more information visit: www.smspasscode.com or our blog at blog.smspasscode.com. Side 16 af 16