Enable better decision making by managing your assets in one simple system

Enable better decision making by managing your assets in one simple system

PDS has developed the most effective way of collecting and analysing the condition of your assets. Maintenance is often overlooked during the design and construction of business assets, driven by the need to minimise capital outlay and tight project timelines, we inherent poor design or the incorrect specification of components in the delivered project. This results in higher maintenance costs, higher whole of life operational costs and a reduction in the availability and or reliability of the asset. To combat these issues PDS conducts RCM Facilitation and Maintenance Strategy Reviews. To get the most effective results, all maintenance strategies, whether for a multi-million dollar mining asset or for a multi-room ski apartment building, must be supported by a dynamic Asset Management reporting tool. A tool that allows the capture of condition management information that delivers a whole of business approach and supports collaborative communication. Plan, don t react With PDS, you can complete your routine inspections electronically in a timely and efficient manner and report on any necessary maintenance in real time. This lets you schedule effective and targeted maintenance for when it is required and not when it is perceived to be necessary. Planned maintenance leads to better utilisation of resources and equipment, saving money and time. offers intelligent technology based solutions, allowing customers to increase productivity and efficiency, maximising their return on investment. PDS Software Solution offers intelligent technology based solutions, allowing customers to increase productivity and efficiency, maximising their return on investment. To ensure the best life-cycle outcome of assets Productivity Development Solutions comprehensive maintenance approach incorporates Maintenance Strategy Analysis, RCM Facilitation and innovative software including: Asset Management Work and Inspections Idler Management Wear Management Complex Mapping PO Box 2186 GATESHEAD NSW 2290 AUSTRALIA t: +61 419 490 828 e. admin@pdsonline.com.au www.pdsonline.com.au

Audits and Inspections Are your business operations running as efficiently as possible? Are you safety compliant? PDS has facilitated and participated in a number of plant audits designed to assess safety compliance as well as throughput capability. Through a process of design review, delay analysis, condition assessment and process review we can develop a detailed understanding of operational hazards to personnel and functional bottlenecks that contribute to unplanned downtime. Through these assessments we have helped our customers to develop short and long term action plans and scope detailed upgrade feasibility reports. Infrastructure has the expertise to facilitate audits enabling customers to meet and exceed national compliance and corporate regulations. Our compliance audits, based on Australian Standards, are suitable for the following industries; transport, power generation and distribution, water management, communications, waste management, emergency services and civil defence. By conducting proactive audits you will ensure compliance and aid in the safety of your workplace for both your workers and the general public. Mining Industry PDS has years of experience in developing equipment strategies for conveyors, plant and mining across mine sites in NSW, Queensland and WA. We understand the functionally of mining equipment, what components fail, how they fail and when they can be expected to fail. With this level of knowledge, we can produce accurate reports on the root cause of failure and not just report on what is wrong. has conducted compliance audits to AS1755, AS1657 and MDG41. Thermography The use of thermography for early failure identifications is becoming a mainstream condition monitoring technique. There are numerous possibilities to use this technology to aid in the early detection of failures PDS has seen excellent results using thermography for conveyor idlers in conjunction with our Idler Management module as well as in many other facets in mining including electrical and hydraulic faults. PDS has engineers and a qualified Thermal Imaging Technician who can discuss the possible solutions thermal imaging may provide. PO Box 2186 GATESHEAD NSW 2290 AUSTRALIA t: +61 419 490 828 e. admin@pdsonline.com.au www.pdsonline.com.au

Asset Management Traditional asset management is paper-based, typically without consistent structure or process. Data collection often involves multiple sources, making it difficult to get real-time data, plus users have to utilise a variety of systems increasing the risk of miscommunication. The PDS Asset Management software provides a system for keeping accurate records of your assets including warranties, manuals and installation and removal dates. Using the add-on module PDS Work Management and Inspections you can then define, digitally capture and complete your routine maintenance tasks. The PDS software generates configurable reports which can be accessed in real-time from anywhere in the world allowing you to schedule effective and targeted maintenance. The PDS software s flexibility allows asset inspections from any industry to be conducted effectively and efficiently. The use of the 3G data network means that remote field checks are available in real time allowing expedient reporting and rectification of hazards or failures. The use of Hazardous Zone 1 approved PDAs allows for checks to be conducted in hazardous areas in the chemical and petrochemical environments. Work Management and Inspections Software Define, digitally capture and complete your routine maintenance tasks. Many sites are now striving towards a paperless system. The PDS Work Management and Inspections Module is not only paperless, it allows inspection records to be visible in real time with a full history of inspection records for each asset. With dash board views in the software, managers can quickly see the condition of their assets as well as the current inspection status. It also allows a quick snapshot of critical problems. For inspections that require a measurement with limits you will be able to trend the condition, allowing proactive planning of scheduled repair or replacement. PDS Asset Management Software The PDS Asset Management module is the backbone of all of the PDS software and is designed to capture technical specification data on installed components. Linking condition based information; the module can be used to rationalise components across a site, generate equipment bill of materials and catalogue installed component details. PO Box 2186 GATESHEAD NSW 2290 AUSTRALIA t: +61 419 490 828 e. admin@pdsonline.com.au www.pdsonline.com.au

Idler Management Think about this, a typical conveyor has between 700 to 7,000 idlers. Of these, 2-3% can be in a failed state at any one time. Mining companies know only too well the substantial costs associated with unscheduled down time on conveyor operations. The conveyor idler is one of the highest consistent downtime causes on conveyors. While it is impossible to prevent idler failures, it is possible to control their financial impact with the PDS Idler Management Module. PDS Idler Management offers a complete solution to the real-time prediction and management of idler failure. Information is captured on ruggedized, handheld devices and relayed via Wi-Fi or 3G for synchronisation with the desktop application. This eliminates the need for time-consuming and inconvenient paperwork and minimises inspection and administration costs. In order to have a comprehensive condition-management-solution, multiple failure detection methods are required. PDS Idler Management ties all this information together into a single point of reference with the capacity to identify trends that need to be targeted with engineering solutions. PDS Idler Management offers dynamic forecasting that may be lacking from the individual reports usually provided. Idler Management Dashboard View PDS Idler Management Software Many sites report that failed conveyor dlers to be one of the leading causes of downtime leading to production loss. With this in mind PDS have design a class leading Idler Management tool. The PDS Idler Management software is designed to replace and enhance many of the current manual systems employed by site. There will be no more lost tags or incorrectly entered information causing inconsistencies or delays All faults that are logged are visible by key personnel immediately and rectification can be carried out in a more timely fashion. PDS Idler Management allows for statistical analysis of historical failures looking at usage, location, MTBF, and maintenance effectiveness. Recent advances have added innovative KPI measures such as percentage of remaining cover and tonnes-based life prediction. PDS have calculated that for the average site the labour and damage savings alone equate to approximately $30k per year per kilometre of belt. PO Box 2186 GATESHEAD NSW 2290 AUSTRALIA t: +61 419 490 828 admin@pdsonline.com.au www.pdsonline.com.au

Wear Management Remove the guesswork around predicting life for components that wear Being able to predict the life of a wearing component has long been the challenge of businesses. A lot of technology has been developed for measuring the thickness of a wear surface, but not a lot of technology has been developed to analyse this valuable information. The PDS Wear Management module allows users to not only collate all this data into a single tool, but also can predict when critical components need to be replaced. The PDS Wear Management module is currently being used across multiple sites and companies within the coal and iron ore industry in Australia, our software tracks over $250 million of belt stock with one miner alone. With the extension of Wear Managements capabilities we have developed wear tracking on other assets such as Shuttle Wheels, HPGR rollers and Chute liners. PDS can see applications for Wear Management in many industries outside mining for wear components such as processing plants, mobile machinery, rail wheel interface to name a few. Complex Management Software PDS Complex Mapping Software PDS recently developed and released the Complex Mapping tool to assist customers in tracking assets with multiple wear surfaces. The Complex Mapping tool allows simple point and click data entry of multiple wear surfaces. This is vital for assets such as transfer chutes in hard rock operations where tracking of wear in wear plates allows forecasting of stocks as well as highlighting transfer issues that can be redesigned out. There are many assets that have multiple wear surfaces such as mobile machinery, crushers, feeders, truck bodies, wheel sets and many more Regardless of the asset of industry if there are multiple wear surfaces the complex mapping tool will enable far better wear reporting. PO Box 2186 GATESHEAD NSW 2290 AUSTRALIA t: +61 419 490 828 admin@pdsonline.com.au www.pdsonline.com.au

Support We are committed to client support. We know that by supporting our clients, they can get the best from our software it s that simple. We deliver 24-hour access to our technology through a securely hosted cloud environment, which includes regular product updates. The PDS software is licensed on a per module, per site basis and is provided on a non-transferable subscription. The modular structure of PDS Software provides clients with the freedom to select only the modules that relate to their particular requirements. This condition management solution is web-based supporting multiple browser types and device types. An optional ruggedised version is available to best suit the user environment. PDS Products can supply a range of hardware and software products to enable effective recording, reporting and management of components and maintenance tasks. PDS can supply ruggedised Zone 1 approved and EX 1 rated PDAs, ruggedised ipad Minis, RFID tags and numbered idler frame labels. The PDS Software is designed to operate in the harshest of environments on ruggedised handheld devices or tablets and current computer systems. PDS customers have full access to an extensive online library of FAQs and technical support articles on our dedicated support site www.support. pdsonline.com.au PO Box 2186 GATESHEAD NSW 2290 AUSTRALIA t: +61 419 490 828 admin@pdsonline.com.au www.pdsonline.com.au