Thank you for choosing the wireless alarm system product

Contents Preface----------------------------------------------------------------------1 Function Instruction----------------------------------------------------3 About the host------------------------------------------------------------4 Function Setting ---------------------------------------------------------6 1. Initialization..6 2. System Settings...6 3. Exit set 7 4. Password recovers.7 5. Factory Reset 7 6. Password and system time setting.8 6.1 Engineering password setting..8 6.2 user password settings..8 6.3 system date setting..9 6.4 system time setting..9 7. Voice alarm telephone setting and deleting 10 7.1 1~6 group user telephone number setting...10 7.2 1~6 group user telephone number deleting.11 7.3 1~2 group user SMS number setting..11 7.4 1~2 group user SMS number deleting 12 8. Coding or deleting Remote control and detector..12 8.1 Coding to remote control..12 8.2 Coding of detector..13 8.3 Remote control deleting 13 8.4 Single detector deleting...13 8.5 All detectors deleting...14 9. System function options settings..14 9.1 Phone line broken alarm setting...14 9.2 Tone of arming or disarming setting..15 9.3 Siren ring time..15 9.4 Arm delay time setting 15 9.5 Delay time of Arm...16 9.6 Phone alarm number of cycles...16 9.7 Remote number of rings...17 9.8 Keyboard password protection 17 9.9 Record setting..17 10. Network alarm settings..18 10.1 Set the first and second groups of center number.18 1 10.2 Delete center number..19 10.3 User ID code set 19 10.4 Arm and disarm the Upload Settings..19 11. Alarm type set 20 12. Zone type setting..20 13. The wireless coding and timing arm and disarm settings 21 13.1 First / second group of time arm set..21 13.2 First / second group of time disarm set 22 13.3 Timing arm and disarm switch settings 22 13.4 Wireless siren coding settings 23 13.5 Wireless smart appliance control...23 14. History query.24 15. Host state 24 16. Day-to-day operations.24 17. Out arm 24 18. Home arm...25 19. Host disarm...25 20. Answer the alarm.26 21. Remote control.27 22. SMS remote control.27 23. SOS..28 24. additional function...28 Maintenance----------------------------------------------------------------28 1. System detection.28 2. Note.29 3. Technical Parameters Schedule..39 [Preface] Thank you for choosing the wireless alarm system product Wireless alarm system adopts the most advanced digital sensing and controlling technologies, it is the intelligent alarm control system containing burglar alarm, fire alarm, fire fighting, gas leakage and SOS. Wireless alarm system uses the most advance multiple random selection technology, it avoids the problems of interference and alarm missing which exist usually in the similar systems. This system can be used widely in residence, shops, villa, and small enterprise and so on.

For you safety, before install and use, we suggest you to read this manual carefully. [Function Instruction] 1. An advanced and reliable communication technology, dialing alarm 2. 8 wired, 99 wireless defense zones 3. Remote control intelligent code, up to 5 wireless remote controls. 4. LCD display, built-in calendar clock, operates easily. 5. Full voice prompts, installation setting and daily operation are more easily. 6. Arm and disarm, and siren on/off are could be controlled by SMS instruction 7. SMS prompt of low power 8. SMS prompt of AC power broken and recover 9. Built-in intercom speaker, can achieve duplex intercom function 10. Built-in wireless transmitter module, wireless siren and smart home system can be linked 11. Preset 2 groups timing arm and disarm time 12. Calls out up to 6 phone numbers to notify you of abnormal conditions 13. Call out up to 2 phone numbers to notify the receiving alarm center. 14. Up to 2 SMS numbers to notify you of abnormal conditions 15. 10 seconds artificially recording message 16. Built-in digital voice, voice broadcast alarm situation automatically 17. Built-in English message, when alarm, the alarm information will be sent automatically 18. All arm and disarm function could be realized by one key 19. Multiple defense zones including instant, delay, 24 hours, bypass 20. Wireless coding: adding new accessories convenient, safe and efficient 21. Remote control: host arm, disarm, monitor, intercom, on / off alarm function 22. 40 alarm events can be recorded 23. Multiple arming modes such as timely arm by remote control, out arm delay by keypad etc. 24. Built-in AAA NI-HM rechargeable battery pack, power off alarm 25. Compatible with internationally accepted protocol Alarm Center: stability treasure Contact ID alarm communication protocol [About the host] The console shall be installed in the centre of the prevent site which could realize best receiving effect from all wireless detectors. Please note that keep the console away from large-sized metallic objects and home appliances producing high-frequency interference, and avoid steel-reinforced concrete and fire-proof doors. Alarm Panel Front Schematic Diagram: Alarm Panel Back Schematic Diagram: 2

Note: wired defense zone is from 81~88, Z1=81, Z8=88 in turn. [Function Setting] 1. Initialization Please insert SIM card and plug in Power, and then power on the system. It will show the GSM alarm system is good when built-in buzzer ring again per second with the signal light flashing again per seconds, and about 15 seconds a long ring with the signal is five cases on the screen. The single lights flash for every three seconds if the alarm system is good. Last, please turn on the backup battery switch. 2. System Settings In the setup process, press the [*] key to return to the previous level, pres the [ # ] key to repeat the current menu or to confirm function and operate according to the voice prompts, after entering the settings Enter four digits engineering password [XXXX] under the disarmed or armed state, and then input the [#] key to confirm. The host voice prompts: Please press 1 to set password and time; press 2 to set or delete alarm phone numbers; press 3 to program or delete wireless detectors and remote controllers; press 4 to go to the system options setup; press 5 to setup connection with external alarm center; please enter 6 to set alarm type and enter; 7 to set defense zone type; press 8 to set wireless encoding and scheduled Arm/disarm; Press 9 to check the system history log; press 0 for factory reset; press * to exit. Displaying [----], the host enter the setting state. During the setting status, operation of multiple functions can be repeated. If no operation during the voice prompts, hosts will automatically exit the settings and return to the standby state after two voice prompts. Note: engineering factory password is [6666]. Operating: [XXXX] [#] XXXX represents: a four-digit engineering password 3

3. Exit set After setting, you need to exit the setting state, press the [*] key continuously. Each time you press the [*] key are accompanied by a "beep". Generally pressing [*] twice continuously can return to the standby state. Operating: [*] [*] 4. Password recovers If forget the password or unable to operate the host, please recover password. In the arming or disarming status, enter the [0321456988] on the keyboard, and then enter [#] to confirm. The host has two short beeps. The hosts recover passwords successful and passwords backs to factory value. User password:1234;engineering password:6666 Operating:[0321456988] [#] 5. Factory Reset If the system is unstable, or forgets the previously setting parameters, etc., it is recommended that users restore factory value operation, re-set the host. Two ways of factory reset: First: In disarm status, use keypad to enter [0321456987] and press [#] to confirm, all the Led indications will be on for 2 seconds and you will hear a long beep. The host gets all its settings cleared and restores to its factory settings successfully. Operating method:[0321456987] [#] four-digit user password, all the Led indications will be on for 2 seconds and you will hear a long beep. The host gets all its settings cleared and restores to its factory settings successfully. Setting method:[0] [XXXX] XXXX represents:four digit user password Operating:[0] [1234] 6. Password and system time setting Enter the settings according to the main menu after the voice prompt, press 1 to enter the password and system time setting. Then you will hear that: To set the administrator password, please press 1; for user password, press 2; for date, press 3; for time, press 4; To return to the previous menu press *, To replay please press #. Accord the voice prompt to start different operating. 6.1 Engineering password setting Enter the password and system time setting, press the [1] on keypad, voice prompt: Please input a 4-digit password. After new password were inputting, Voice prompt: Setting completed. Fault engineering is:6666 Operating:[1] [1] [XXXX] XXXX represents:4- Digits new engineering password Example: change engineering password to 3928 Operating: [1] [1] [3928] Second: Enter settings, according the voice prompt of the main menu, press 0 to restore the state of the system settings. Then you will continue to hear the following voice: "Please input password. According voice prompt to enter a 6.2 User password settings After entering the password system time settings, press [2] on keypad, voice prompt: Please input a 4-digit password. A 4- digits new user password is 4

entered, the voice prompts: Setting completed ". User password changed successfully. The default user password is: 1234 Operating:[1] [2] [XXXX] XXXX represents:4- Digits new user password Example:change user password to 3405; Operating:[1] [2] [3405] After entering the password and system time setting, you press [3] on keypad please. Voice prompts: Please input a four-digit system time. A four-digit system time is entered, the voice prompts: Setting completed. System time is changed successful. Operating:[1] [4] [DD] [EE] DD represents: the number of hours of the current time (24-hour). EE represents: the number of minutes of the current time. Example: time is set to 7:51 AM Operating:[1] [4] [07] [51] 6.3 System date setting After entering the password and system time settings, you press [3] on keypad please. Voice prompts: "Please input a six-digit system date. A six-digit system date is entered, the voice prompts: Setting completed. System date is changed successful. Operating: [1] [3] [AA] [BB] [CC] AA represents: the current year after a two-digit BB represents: two digits of the current month CC represents: two digits of the current date Example: the date is set to 2012071001 Operating: [1] [3] [12] [07] [01] 6.4 System time setting 7. Voice alarm telephone setting and deleting After entering the settings, you press 2 to enter the voice alarm call set and delete settings according to the main menu of voice prompts. Then you will continue to hear the following voice: Please press 1 to set the first alarm phone number, press 2 to set the second phone number, press 3 to set the third phone number, press 4 to set the forth phone number, press 5 to set the fifth phone number, press 6 to set the sixth phone number; press 7 to set the first SMS alert phone number; press 8 to set the second SMS alert phone number. To return to the previous menu press [*],To replay please press #. According voice prompt to please press [1~8], Voice prompt: Set phone number, please press 1; delete phone number, please press 2. Accord the voice prompt to start different operating. Note: This version of the host does not have to set the SMS number, so the instruction of operation method is not written. 5

7.1 1~6 group user telephone number setting After voice Alarm phone settings and deleting, please according the voice prompt to press [1-6], voice prompts: To set phone number, please press 1; to delete phone number, please press 2 ". Then press [1] to set the phone number. Finished entering the phone number, press [#] to confirm. The voice prompts: "setting completed". The user's phone number is set successfully. Operating:[2] [1~6] [1] [XXXXXXXX] [#] 1~6 represents:the one set belongs the six telephone numbers. XXXXXXXX represents:user s telephone number Special note: If your phone is connected to the switch, and please add digital 0 or 9, otherwise the phone cannot dial out. Example:Set the first telephone number as13988880751 Operating:[2] [1] [1] [13988880751] [#] 7.2 1~6 group user telephone number deleting After voice Alarm phone settings and deleting, please according the voice prompt to press [1-6], voice prompts: " To set phone number, please press 1; to delete phone number, please press 2". Then press [2] to delete the phone number. Finished entering the phone number, press [#] to confirm. The voice prompts: Delete completed". The user's phone number is set successfully. Operating:[2] [1~6] [2] 1~6 represents: The one detected belongs the six telephone numbers. Example:Delete the first telephone number Operating:[2] [1] [2] 7.3 1~2 group user SMS number setting After voice Alarm phone settings and deleting, please according the voice prompt to press [7~8], voice prompts: To set phone number, please press 1; to delete phone number, please press 2 ". Then press [1] to set the phone number. Finished entering the phone number, press [#] to confirm. The voice prompts: "setting completed". The user's phone number is set successfully. Operating:[2] [7~8] [1] [XXXXXXXX] [#] 7~8 represents:the one set belongs the two of SMS numbers. Example:Set the first telephone number as13988880751 Operating:[2] [7] [1] [13988880701] [#] 7.4 1~6 group user telephone number deleting After voice Alarm phone settings and deleting, please according the voice prompt to press [7~8], voice prompts: " To set phone number, please press 1; to delete phone number, please press 2". Then press [2] to delete the phone number. Finished entering the phone number, press [#] to confirm. The voice prompts: Delete completed". The user's phone number is set successfully. Operating:[2] [7~8] [2] 7~8 represents:the one set belongs the two of SMS numbers. Example:Delete the first telephone number Operating:[2] [7] [2] 8. Coding or deleting Remote control and detector After entering the settings, please accord to the main menu of voice prompts to press 3 to enter a remote control / detector setting of the coding and deleting. Then you will continue to hear the following voice: Please press 1 to program remote 6

controllers, press 2 to program wireless detectors, press 3 to delete remote controllers, press 4 to delete one detector, press 5 to delete all detectors. To return to the previous menu press *, To replay please press #. Accord voice prompts to press [1~5]. Accord the voice prompt to start different operating. 8.1 Coding to remote control Remote control should be coded with the host, if want to control the host After enter the coding or deleting remote control and detector setting, accord voice prompt to press [1], you will hear: Please press any key on the remote controller. After pressing, voice prompts: Coding completed. If the remote control has been coded, voice prompts: Encoding repeat, coding failure. Note: If would like to continue to code next remotes, only need to then press any key of next remotes, press the [#] to exit the remote control code Operating:[3] [1] 8.2 Coding of detector Wireless detector should be coded with the host, in order to the host could trigger alarm by it. After enter the coding or deleting remote control and detector setting, accord voice prompt to press [2], voice prompt: Please enter a two-digit defense zone, between 02 to 99. Accord voice prompt to enter number of defense zones [02~99]. Voice prompt: please trigger detector. When detector was triggered, you will hear: coding completed. Operating:[3] [2] [02~99] 02~99 represents :Defense zones number of 02~99 Example: coding defense zones of 05 Operating:[3] [2] [05] 8.3 Remote control deleting The remote control has been deleted; it cannot be any operation of the alarm host After enter the coding or deleting remote control and detector setting, accord voice prompt to press [3], voice prompt: delete completed. all remote controls were deleted. Operating:[3] [3] 8.4 Single detector deleting. The detector has been deleted; it cannot be any operation of the alarm host. After enter the coding or deleting remote control and detector setting, accord voice prompt to press [4] : Please enter a two-digit defense zone, between 02 to 99. Accord voice prompts to press defense zone number [02~99]. Voice prompt : Deleted completed Single detector was deleted successful. Operating:[3] [4] [02~99] 02~99 represents :Defense zones number of 02~99 Example: coding defense zones of 05 Operating:[3] [4] [05] 8.5 All detectors deleting. The detector has been deleted; it cannot be any operation of the alarm host. After enter the coding or deleting remote control and detector setting, accord voice prompt to press [5], Voice prompt: Deleted completed All detectors were deleted successful. Operating:[3] [5] 9. System function options settings 7

Enter the settings according to the main menu after the voice prompt, and then press [4] to enter system function options setting. You will hear: Please press 1 to set the alarm for phone line error, press 2 to set siren on or off when arm or disarm, press 3 to set siren duration, press 4 to set arm delay, press 5 to set alarm delay, press 6 to set the number of cycles to call alarm phone, press 7 to set the number of ring times when calling from remote, press 8 to set password for access when arm/disarm by keypad, press 9 to enter voice recording; To return to the previous menu press *, To replay please press #. Please press [1~9] and start different operating according the voice prompt. 9.1 Phone line broken alarm setting Set phone line broken alarm could protect telephone line. In system function options setting states, according voice prompt to press [1], you will hear: Press 1 on, press 0 off. Press 1 or 0 according your request, finally you will hear that: setting completed. Phone line broken alarm was set successful. Factory fault: turn on Operating:[4] [1] [X] X=1 represents :Turn on X=0 represents :Turn off Example:Turn off phone line broken alarm function Operating:[4] [1] [0] 9.2 Tone of arming or disarming setting When arming or disarming, the operation will be prompted through external siren In system function options setting states, according voice prompt to press [2], you will hear: Press 1 on, press 0 off. Press [1] or [0] according your request, finally you will hear that: setting completed. Phone line broken alarm was set successful. Factory fault: turn on Setting method:[4] [2] [X] X=1:Arm/disarm prompt tone is on X=0:Arm/disarm prompt tone is off For example:arm and disarm the tone turned off operation Operating method:[4] [2] [0] 9.3 Siren ring time Enter into the system settings, according to voice prompts, press [3] on the keyboard, voice prompt: Please input two digits, between 00 to 15. Input the delay time [00 to 15] minutes. The last voice prompt: Setting completed ". Siren ring time setting successfully. Factory default: 3 minutes. Setting method:[4] [3] [XX] XX: [00~15] minutes For example: Siren rings 2 minutes operation Operating method:[4] [3] [02] 9.4 arm delay time setting Arm delay the host will delay a specific time before entering into armed state when the remote armed Enter into the system settings, voice prompts, press [4] on the keyboard, voice prompts: Please input two digits, between 00 to 99. Input the delay time [00 to 99] seconds. The last voice prompt: Setting completed ". Arm delay set successfully. The factory default: do not delay. Setting method: [4] [4] [XX] XX:[00~99]seconds For example:delay time of arm is 10 seconds Operating method:[4] [4] [10] 9.5 Delay time of Arm Arm delay: host will alarm in specific time when it receives the signal Enter into the system settings, voice prompts, press [5] on the keyboard, voice prompts: Please input two digits, between 00 to 99. Input the delay time [00 to 99] seconds. The last voice prompt: Setting completed ". Alarm delay set successfully. The factory default: do not delay. 8

Setting method:[4] [5] [XX] XX:[00~99] seconds For example: delay time of alarm is 10s Operating method:[4] [5] [10] 9.6 Phone alarm number of cycle s times Telephone dial - up cycle s times: Time of the host will dial the first group telephone number start from scratch again when all the numbers to dial out but did not put through. Enter into the system settings, voice prompts, press [6] on the keyboard, voice prompts: Please input two digits, between 00 to 15. Input the cycle s time [00 to 15] seconds. The last voice prompt: Setting completed. The phone alarm cycle s times successfully set. Factory default: 9 Setting method:[4] [6] [XX] XX:[00~15] times For example: The specific operation of the alarm 2 cycles. Operating method:[4] [6] [02] 9.7 Remote number of rings The ringing signal is issued by the switch send a regular pulse signal to the handset by detecting it to identify whether there is an incoming call, the handset here is the alarm host Into the system options settings, voice prompts, press on the keyboard [7] key, voice prompts: " Please input one digit, between 0 to 9.Enter the remote number of rings [0 ~ 9]. The last voice prompt: Setting completed ". Remote successfully set the number of rings. The factory default: 6. Note: If the remote number of rings is set to 0, it will turn off the remote control function Setting method: [4] [7] [X] X:[0 to 9] times Example: 2 times the number of rings to set up a remote operation. Operating method: [4] [7] [2] 9.8 Keyboard password protection The host keypad lock can guarantee that the host password is not malicious changed Into the system settings, voice prompts, press [8] key on the keyboard, voice prompts: Press 1 on, press 0 off ". If need turn on the keyboard password protection function, just press [1] key to turn it on, Press [0] to turn it off. The last voice prompt: Setting completed Keyboard password protection feature set successfully. Factory default: open. Setting method: [4] [8] [X] X=1represents: keyboard password protection feature is turned on X=0represents: keyboard password protectionisturnitoff. Example: turn the keyboard password protection. Operating method: [4] [8] [0] 9.9 Record setting Into the system settings, voice prompt, press the [9] key on the keyboard, hear the voice prompts: Please leave a message Recording icon [ ] long bright, 10-second clock countdown begin, recording begin: from the host 30cm, moderate voice recording in standard Mandarin user information; 10 seconds at the end of the end of the beep sound recording; same time, the host automatically start recording playback. Setting method: [4] [9] 10. Network alarm settings Enter into the settings according to the main menu after the voice prompts. Press [5] to enter the network alarm settings. Then you will continue to hear the following voice: Please press 1 to set the first alarm phone number, press 2 to set the second phone number, press 3 to set user ID, press 4 to set the arm/disarm uploading report. To return to the previous menu press *, To replay please press #. According to the voice prompts, press the button [1-4] key. Follow the voice 9

prompts different operation. 10.1 Set the first and second groups of center number The host networking alarm, it is necessary to set up your computer Alarm Center phone number to upload data communications After entering the network alarm settings, voice prompts, press [1 ~ 2] on the keyboard, voice prompts: " To set phone number, please press 1; to delete phone number, please press 2. Then, press [1] key to set. Finished entering the phone number, press [#] to confirm. The voice prompts: Setting completed Setting method:[5] [1~2] [1] [XXXXXXXX] [#] [1~2]:First set of numbers and second set of numbers XXXXXXXX:Center number Example: set the first set number of 13800002245 Setting method:[5] [1] [1] [13800002245] [#] LCD Display: 10.2 Delete center number After entering the network alarm settings, voice prompts, and press on [1 ~ 2] the keyboard, voice prompts: " To set phone number, please press 1; to delete phone number, please press 2. Then press [2] to delete the central telephone. The voice prompts: Setting completed Setting method: [5] [1~2] [2] [1~2]: to delete the first or second group center number Example: delete the first group of center number Operating method: [5] [1] [2] 10.3 User ID code set After entering the network alarm settings, voice prompts, press on the keyboard [3] key, voice prompted: Please enter a four-digit user ID. Then do it. Press the [#] key to confirm. The voice prompts: Setting completed " Setting method: [5] [3] [XXXX] [XXXX]: four-digit user coding Example: user encoding settings for 2245 Operating method: [5] [3] [2245} 10.4 Arm and disarm the Upload Settings After entering the network alarm settings, voice prompts, press [4] on the keyboard, voice prompts: Press 1 on, press 0 off The voice prompts: " Setting completed after you turn it on to upload or turn it off. Setting method: [5] [4] [X] X=1:Turn on arm and disarm the Upload Center X=0:Close to arm and disarm the Upload Center For example: turn it on of arm and disarm the upload center Operating method: [5] [4] [1] 11. Alarm type set Enter the settings according to the main menu of voice prompts, press [6] to enter the alarm set. Then you will continue to hear the following voice: Please input a two-digit defense zone between 02 to 99, followed by a one-digit alarm type: 0 is a bypass defense zone, 1 is real-time defense zone, 2 is stay at home defense zone, 3 is 24 hour defense zone. Please press # to confirm, press * to return ". Follow the voice prompts different operation. Enter the two-digit defense zone number [02 to 99] and an alarm type [0 ~ 3], press [#] key to confirm. The default alarm: Real-time defense zone Setting method: [6] [02 to 99] [X] [#] 10

02~99:02~99 defense number X=0:Bypass defense zones X=1:Real-time defense zone X=2:Stay at home defense zone X=3:24-hour defense zone Example: 46 defense zone is instant zone Operating method:[6] [46] [1] [#] 12. Defense zone type setting Enter into the settings according to the main menu of voice prompts to enter the zone typesetting, press [7]. Then you will continue to hear the following voice: Please enter the two digit number of defense zone, than input one digit number of defense zone type, 1. SOS 2.fire alarm 3.gas leak 4. Window alarm 5. Balcony alarm 6.Hall alarm 7.Magnetic contact alarm 8.perimeter alarm. Follow the voice prompts different operation Setting method:[7] [02~99] [X] 02~99:Defense zone number of 02~99 X=1: SOS alarm X=2: fire alarm X=3: gas leaks alarm X=4: window alarm X=5: balcony alarm X=6: hallalarm X=7: dooralarm X=8: boundary alarm Example: Set 41 zone as SOS alarm Operating method:[7] [41] [1] LCD display 13. The wireless coding and timing arm and disarm settings According to the main menu of voice prompts enter the settings, press [8] to enter the wireless coding and timing arm and disarm settings. Then you will continue to hear the following voice: Please press 1 to set first scheduled arm, press 2 to set second scheduled arm, press 3 to set first scheduled disarm, press 4 to set second scheduled disarm, press 5 to enable/disable arm/disarm schedule, press 6 to enter code for the wireless siren, press 7 for wireless home appliance control. To return to the previous menu press *, To replay please press #. Follow the voice prompts different operation. 13.1 First / second group of time arm set Time arm and time disarm are Convenient in the required time segment is armed of disarmed To enter the wireless coding and timing arm and disarm settings, voice prompts, and press [1~2] on the keyboard, voice prompts: Please enter a four-digit fixed time The input time arming time the voice prompts: Setting completed. Setting method: [8] [1~2] [AA] [BB] [1~2]: First / second group of time arm AA: Hour (24hours) BB: Minute Example: set first group arm time is 22:50 Operating method: [8] [1] [22] [50] 13.2 First / second group of time disarm set Time arm and time disarm are Convenient in the required time segment is armed or disarmed. 11

To enter the wireless coding and timing arm and disarm settings, voice prompts, and press [3~4] on the keyboard, voice prompts: Please enter a four-digit fixed time The input time disarming time. The voice prompts: "Setting completed Setting method:[8] [3~4] [AA] [BB] [3~4]:First / second group of time disarm AA: Hour (24hours) BB: Minute Example: set first group arm time is 7:51 Setting method:[8] [3] [07] [51] 13.3 Timing arm and disarm switch settings Only open timing arm and disarm switch, timing arm and disarm the timing to be effective Enter the wireless coding and timing cloth disarm setting, voice prompts, keyboard [ 5 ] key, voice prompts : " Press 1 on, press 0 off. After operation it successfully, voice prompts: "Setting completed Setting method:[8] [5] [X] X=1:Timing arm and disarm turned on X=0:Timing arm and disarm turned off Example:Turn on timing arm and disarm Operating method:[8] [5] [1] 13.4 Wireless siren coding settings Enter the wireless coding and timing arm/disarm setting, voice prompts, press [ 6 ] on the keyboard, voice prompts : " Please enter a eight-digit wireless address code. The wireless encoding of eight digits is only from 0-2.The last voice prompt: Setting completed. Setting method:[8] [6] [XXXXXXXX] XXXXXXXX: eight-digit wireless code Example:Set wireless encoding as 01020102. Operating method:[8] [6] [01020102] 13.5 Wireless smart appliance control To enter the wireless coding and timing arm and disarm settings, voice prompts, press [7] on the keyboard, voice prompts: Please enter an eight-digit wireless address code. The wireless encoding of eight digits is only from 0-2.The last voice prompt: Setting completed. Setting method:[8] [7] [XXXXXXXX] XXXXXXXX:Eight-digit wireless code Example:Set wireless equipment encoding as 11110102 Operating method:[8] [7] [11110102] 14. History query Enter the settings according to the main menu after the voice prompt, press [9] to enter the history query. Then you will continue to hear the following voice: Press 2 to inquiry next message; Press 8 to inquiry former message; Press * to return previous menu; Press # for replay. Host enters history inquiries, press [2] to downturn, press the [8] to upturn. Setting method:[9] 15. Host state 12

Under normal circumstances, usually only the following four states: 1) Arm state: armed,the02to99zonealarm. 2) Home arm state: armed, the settings for [home arm] are effective zone alarm. 3) Disarm state: disarmed, the 02 to 99 zone alarm (24 hours zone excluded). 4) Set state: when set it, all zones are not the police. 16. Day-to-day operations The remote control is carried out a variety of functional operation of a device by radio, alarm host. The role is to facilitate the users outside the door (households) or distant alarm, operate for out arm, home arm, SOS alarm, and disarm immediately. 1) Out arm: Press [ ] key, the host is armed immediately alert. 2) Disarm operation: Press the [ ] key, the host is in disarming standby state immediately. 3) Home Arm: Press [ ] key, is at home (staying) alarm alert. 4) SOS alarm: Press [ ] key, the host immediately trigger an emergency alarm 17. Out arm Out arm: the alarm host all alert arming: no one at home, you need to prevent on-site comprehensive alarm detection alert, all detectors are in working condition; triggered when the probe source (thief intrusion, fire, gas leak, etc.)the detectors, alarm system alarm immediately. If host keyboard lock is off, press the host keyboard [OUT ] key, it will in AWAY state; if the host keypad lock is on, press the host keyboard [OUT ] key, and then need to enter the user password to enter the system external arming state. Remote control operation: Press the remote control [OUT ] key once. Host operation: [OUT ] (keypad lock off) or [OUT ] + user password + # (keyboard lock on) SMS instructions: [user password] + ARM 18. Home arm Home arm (staying): the alarm host is part of the alert arm: someone at home, for safety reasons, you need to be part of the detector in the home (such as doors, windows, balconies, boundary alarm etc.) in a state of alert; another part of the detector (e.g.: hall and other masters of their own trigger to cause false alarm) in non-state of alert, then select home arm. Note: home arm only realize by a remote control to operate. Remote control operation: Press the remote control [ ] key once. Host operation: press home arm [ ] on the keyboard 19. Host disarm Hosts disarm: it is in a non-alert state. One: after arming operation, the normal disarm; another: after host alarm need stop this alarm, is also disarmed, normal zone will not work after disarm operation, except for 24-hour zones. The host keyboard lock is off, you want to disarm, Press disarm buttons directly on the host[ ]can be realized disarm; if the host keyboard lock is turned on, you will need to press[ ], then enter user password according to voice prompts, plus [#] key. [Away] or [Home arm] indicator light goes out. Disarm operation is successful. Remote control operation: Press the[ ]button. Host operating: [disarm] (keyboard lock off) or [disarm ] + [user password] + [# (keyboard lock on) ] SMS instructions: [user password] + DISARM 13

20. Answer the alarm Once the alarm host alarm, alarm beep sound immediately; First dial the default phone (mobile phone) voice alarm automatically. If the phone unanswered, the host will be automatically transferred to the next set of calls, all preset phone numbers of each cycle dial 9 times. If the dial telephone answers, the handset first heard the alarm zone information and alarm location, and then plays 10 seconds of recoding information. Recording will continue to play after playing remote operation tone: Press 1 to arm, press 2 to disarm, press 3 to monitor, press 4 to talk, press 5 to close monitor, press 6 sirens on, press 7 siren off, press 8 to turn on the wireless electrical appliances control, press 9 to turn off electrical appliances control. At the same time, press the keys of the keyboard of the phone (mobile phone), you can achieve different functions: Direct hook: and no one answered the host cycle to dial all phone 9. Hang up directly: and no one answered, the host cycle to dial all phone 9 times. Press [1]: the host into the arm state, the earpiece voice prompts: armed. Press [2]: the host into disarm state, earpiece voice prompt: disarmed. " Press [3]: the host into the monitor for 30 seconds, if continue monitoring, press [3] key repeatedly delay of 30 seconds. Press [4]: start the scene 30 seconds intercom function. Press [5]: close monitoring function. Press [6]: turn on the siren. Press [7]: turn off the siren. Press [8]: turn on the wireless appliance control. Press [9]: turn off the wireless appliance control. 21. Remote control Via phone (mobile phone) call the phone number connected with alarm host, set the number of rings after the handset to hear "Please input password" tone. In this case, enter the password; password is correct, the earpiece sent prompt Press 1 to arm, press 2 to disarm, press 3 to monitor, press 4 to talk, press 5 to close monitor, press 6 sirens on, press 7 siren off, press 8 to turn on the wireless electrical appliances control, press 9 to turn off electrical appliances control ; Password error,the earpiece sent prompt Password is incorrect, please re-enter After entering the remote control operation via the telephone keypad remote control: Press [1]: the host into the arm state, the earpiece voice prompts: armed. Press [2]: the host into disarm state, earpiece voice prompt: disarmed. " Press [3]: the host into the monitor for 30 seconds, if continue monitoring, press [3] key repeatedly delay of 30 seconds. Press [4]: start the scene 30 seconds intercom function. Press [5]: close monitoring function. Press [6]: turn on the siren. Press [7]: turnoffthesiren Press [8]: turn on the wireless appliance control. Press [9]: turn off the wireless appliance control 22. SMS remote control Control the control panel by SMS instruction to arm, disarm and make the siren turn on or off. The detailed SMS instruction: For Arm: [User password] + ARM. Example: 1234ARM. If you got the message of arm after sent the message, said that the home alarm system is in the arm status. For Disarm: [user password] + DISARM. Example: 1234DISARM. If you got the message of disarm after sent the message, said that the home alarm system is in the disarm status. For turning on the siren: [user password] + ONSIREN. Example: 1234ONSIREN. If you got the message of siren is on, said that the siren is ringing. For turning off the siren: [user password] +OFFSIREN. Example: 14

1234OFFSIREN. If you got the message of siren is off, said that the ring of siren is closed. 23. SOS Sometimes, at home occur in some special cases: the elderly or children sudden illness, requiring emergency; suddenly caught fire in the home, they need for help; criminals burglary, mugging, must call 110. At this time, simply press the host [ ] emergency key, remote control of the [ ] key, wireless emergency button. Alarm system immediately alarm and automatically call for alarm. Remote control operation: Press the [ ] button. Host operating: host keyboard [ ] emergency button 24. additional function the home alarm system will send the SMS message of abnormal conditions include low power, AC power broken and AC power recover automatically. So customers could know the working condition of the home alarm system timely. [Maintenance] 1. System detection Alarm system are in use every day, but must also conduct regular maintenance, periodic testing, in order to ensure the alarm system is stable, reliable, safe operation. Usually, alarm host must be comprehensive detection every three months, detectors test monthly. Even no conditions you should test them every three months. Host detection: 1. host arm /disarm normally or not. 2. The host alarm whether normal outgoing calls 3.Normal receiver detector signal or battery backup is normal. Probe detection: 1. Trigger detectors by hand, check whether alarm normally. 2.Check the batteries in all detectors, see if under voltage. 3. Test launch of wireless detectors, to see whether it can communicate with the host. 2. Note Do not dismantle, repair and renovation products, otherwise there will be likely to cause accidents and malfunctions. Do not use this product has been dropped on the ground or a hard object, avoid strong impact, resulting in failure and damage. Without the relevant permit and consent, do not directly set to the "110", "119" or the police station alarm phone alarm calls of the host. 3. Technical Parameters Schedule Table one: Technical Parameter Input power: DC12V 500mA Standby power consumption : 66mA Alarm current: Max 650mA Output current: DC12V 300mA GSM mode Quad-band850/900/1800/1900MHz Radio frequency: 315MHz/433MHz Encoding: 2262 IC / 4.7MΩ Alarm sound: 110dB Back-up battery: AAA 7.2V Clock battery: Zn/Ago battery3.0v Suitable temperature: -20 ~+55 15

Suitable humidity: 40% ~ 80% two: instruction setting Number First-level menu Second-level menu Instruction Remark Factory fault Engineer password setting 1+1+XXXX XXXX=a 4-digit engineer password setting 6666 Password and User password setting 1+2+YYYY YYYY= a 4-digit user password setting 1234 system time system time setting 1+3+AA+BB+CC AA=year,BB=month, CC=date 1 setting system time setting 1+4+DD+EE DD=hour,EE=minute Table 2 Voice alarm telephone setting and deleting 3 4 Remote control code /Detector code matched and deleted System function options settings 1~6 alarm phone setting 2+X+1+YYYY+# X=1~6 group telephone number YYYY=alarm telephone number 1~6 delete alarm code 2+X+2 X=1~6 group telephone number 1~2 SMS number setting 2+X+YYYY+# X=7~8(1~2 group SMS number) YYYY=SMS number 1~2 delete SMS code 2+X+2 X=7~8(1~2 group SMS number) Remote control code 3+1 Detector code 3+2+XX XX=defense zone number Delete remote control code 3+3 Delete single detector code 3+4+XX XX= defense zone number Delete all detector code 3+5 Phone line broken alarm setting 4+1+X X=1 turn on X=0 turn off 0 Tone of arming or disarming 4+2+X X=1 turn on X=0 turn off setting Siren ring time setting 4+3+XX XX=delay time 00~15 minutes 3 minutes arm delay time setting 4+4+XX XX=delay time 00~99 seconds Alarm delay time setting 4+5+XX XX=delay time 00~99 seconds Phone alarm number of cycles 4+6+XX XX=00~15 times 9 times Times of rings 4+7+X X=0~9 times 6 times Keyboard password protection 4+8+X X=1 turn on X=0 turn off 1 Record setting 4+9 Play recoding automatically after recoding 16

17

5 6 7 8 Network alarm settings Alarm type set Zone type setting The wireless coding and timing arm and disarm settings Set the first and second groups of center number Delete the first and second groups of center number 5+X+1+YYYYY+# X=1~2 group YYYYY=telephone number 5+X+2 18 X=1~2 group User ID setting 5+3+XXXX XXXX= 4-digit user password Arm and disarm the Upload Settings 5+4+X X=1 turn on X=0 turn off Alarm type set 6+XX+Y+# 02~99:02~99 defense number, X=0: Bypass defense zones X=1:Real-time defense zone, X=2:Stay at home defense zone, X=3:24-hour defense zone Zone type setting 7+XX+Y 02~99:02~99 zones number X=1: SOS alarm X=2: fire alarm X=3: gas leaks alarm X=4:window alarm X=5:balcony alarm X=6:hall alarm X=7:door alarm X=8:boundary alarm First / second group of time arm 8+X(1~2)+AA+BB X: First / second group of time arm set AA: Hour (24hours) BB: Minute First / second group of time 8+X(3~4)+AA+BB X:First / second group of time disarm disarm set AA: Hour (24hours) BB: Minute Timing arm and disarm switch 8+5+X X=1 turn on settings X=0 turn off Wireless siren coding settings 8+6+XXXXXXXXX XXXXXXXX=8 is wireless coding Wireless smart appliance 8+7+XXXXXXXXX XXXXXXXX=8 is wireless coding control 9 History query History query 9 press [2] to downturn, press the [8] to upturn Instant defense zones

19