Displaying a CAODC Service Rig Electronic Tour Sheet V1.4.0 A displayed or printed Service Rig Electronic Tour Sheet is divided into the individual sections as defined below. Each section can have independent access control enforced by the system. One or more sections can be displayed or printed together as required. GENERAL NOMENCLATURE: Filled-in values are indicated using the italic font. The format of field contents is shown where: 0 indicates a digit (0-9), a indicates alpha-numeric (a letter or digit only), x indicates an unrestricted text character A field limited to a dropdown list of values is indicated by the character. A yes/no field is indicated using the checkbox character which would be shown as to indicate a yes value. System generated or calculated values are indicated with shading. Well Service Company Name Street Address City, Province, Postal Code Home Terminal Address Customer/Client/Operator Name Street Address City, Province, Postal Code Phone 000-000-0000 Fax 000-000-0000 Phone 000-000-0000 Fax 000-000-0000 Daily Work Record Revision 00 Year 0000 Month 00 Day 00 Job # aaaaaaaaaaaaaaaa Ticket # aaaaaaaaaaaaaaaa Contractor Code XXXX Rig # aaaaaaaa Licence # 000000000 Rig Manager xxxxxxxxxxxxxxxxxxxxxxxxxxxxx Province XX PO # aaaaaaaaaaaaaaaa Company Rep. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Surface Loc. XXXX xxxxxxxxxxxxxxxxxxxxxxxxx AFE # aaaaaaaaaaaaaaaa Field Name xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Downhole Loc. XXXX xxxxxxxxxxxxxxxxxxxxxxxxx Approver # aaaaaaaaaaaaaaaa GPS 00:00:00.00 N 000:00:00.00 W Days on Well 000 Chrg Code aaaaaaaaaaaaaaaa Well Type Oil Gas Other Vertical Horzontal Slant Job Type Completion Work Over Abandon Re-Entry Production Rigless Other The above section acts as header information for the entire Tour sheet. The Revision field is generated by the system as a sequential number starting from revision 00. The dropdown for the Rig Manager field contains values from a pick list of rig managers setup in a specific implementation. Service Rig Tour Sheet v1.4.0 1 of 10 January 2013
The dropdown for the Province field contains values from the Province pick list. The format of the Surface Loc. and Downhole Loc. fields depends on the survey system selected from the dropdown (DLS, NTS, CLSS, Lat/Long or UTM). Well Information Well Class AAA Well Depth 00000.00 m H 2 S 0.000 % SICP 000000.00 XXXX BHP 000000 kpa Plugback Total Depth 00000.00 mkb LEL 00.00 % SITP 000000.00 XXXX The dropdown for the Well Class field selects a value from the Well Class pick list. The dropdown for the SICP and SITP fields selects from kpa, TSTM, Vac., N/A where kpa is the default and a positive or negative number is required; TSTM means Too Small To Measure; Vac. means Vacuum; N/A means Not Applicable. Casing and Tubing Casing Size xxxxxxxxxx Casing 00 joints Pressure Rating 000000 kpa Tubing Size xxxxxxxxxx Tubing Ran 00 joints Tubing Pulled 00 joints The dropdown for the Casing Size field selects a value from the Casing Size pick list. The dropdown for the Tubing Size field selects a value from the Tubing Size pick list. Rod Report Rod Size xxxxxxxxxx Rods Ran 00 Rods Pulled 00 Polish Rod Size xxxxxxxxxx Ponies Ran 00 Ponies Pulled 00 Pony Sizes xxxxxxxxxx xxxxxxxxxx xxxxxxxxxx xxxxxxxxxx xxxxxxxxxx The dropdown for the Rod Size, Polish Rod Size and Pony Sizes fields select a value from the Rod Size pick list. The Pony Sizes field allows a variable list of pony sizes to be selected/listed. Fluids Tank Fluid Type Total Load Fluid In Tank Hauled In Hauled Out Lost Today Rig xxxxxxxxxxxxxxxxxxxx 000.00 m3 000.00 m3 000.00 m3 000.00 m3 000.00 m3 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx 000.00 m3 000.00 m3 000.00 m3 000.00 m3 000.00 m3 xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx 000.00 m3 000.00 m3 000.00 m3 000.00 m3 000.00 m3 The number of rows listed corresponds to the number of tanks measured. Service Rig Tour Sheet v1.4.0 2 of 10 January 2013
Details of Operation From To Hours Activity Details 00:00 00:00 00.00 xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 00:00 00:00 00.00 xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx The number of rows listed corresponds to the number of activities selected. The minute component of the From and To fields is restricted to the values of 00, 15, 30 or 45. The Hours field is calculated by the system as the elapsed time between the From and To values. The dropdown for the Activity field selects a value and its description from the Activity Code pick list. The hours associated with Break activities are accumulated into the Break field of affected employees in the Crew Details section. Crew Details Wage Zone 1 (South) Wage Zone 2 (North) Under 4500kg Over 4500kg Employee No Name Position SRCP Start End Hrs of Work Rig Hrs Extra Labor Down Over Travel Break Subsistence Camp Non PPE aaaaaaaaaa xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx XX 00:00 00:00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 aaaaaaaaaa xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx XX 00:00 00:00 00.00 00.00 00.00 00.00 00.00 00.00 00.00 The number of rows listed corresponds to the number of names selected. The Under 4500kg field is the false value and the Over 4500kg field is the true value of the DayPayroll/IsOver4500kg element in the XML specification. The dropdown for the Name field contains values from a pick list of employees set up in a specific implementation. The Employee No field is populated by the system when a Name is selected. The dropdown for the Position field selects a value from the Position pick list. The minute component of the Start and End fields is restricted to the values of 00, 15, 30 or 45. The Hrs of Work field is calculated as the elapsed time between the Start and End values. The Rig Hrs, Extra Labor, Down, Over, Travel and Break fields are restricted to a quarter hour resolution. The initial value of the Break field is the total hours from the Break activities entered in the Details of Operation section. Each employee added to the Crew Details section is made available in the End of Employment section. Each employee added to the Crew Details section is added to the Hours of Service section with: Driving hours set to 0.00; Non Driving hours set to Hrs of Work minus Break ; Off Duty hours set to 24.00 minus Hrs of Work plus Break. Service Rig Tour Sheet v1.4.0 3 of 10 January 2013
End of Employment Employee No Name ROE Quit Fired Notes aaaaaaaaaa xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx aaaaaaaaaa xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx The End of Employment section is an optional section and visible only to payroll people. The number of rows listed corresponds to the number of names selected. The dropdown for the Name field contains only the names selected in the Crew Details section. The Employee No field is populated by the system when a Name is selected. Hours of Service Driver Name Vehicle Id From Location To Location On Duty Driving Non Driving Off Duty Total xxxxxxxxxxxxxxxxxxxxxx aaaaaaaaaa xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx 00.00 00.00 00:00 00.00 xxxxxxxxxxxxxxxxxxxxxx aaaaaaaaaa xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx 00.00 00.00 00:00 00.00 The Hours of Service section is intended to help satisfy Commercial Vehicle Drivers Hours of Service Regulations requirements. The Driver Name, Driving, Non Driving and Off Duty fields are populated by the system from the Crew Details section. The Total field is calculated by the system to be the sum of the Driving, Non Driving and Off Duty fields and should normally be equal to 24.00. Service Rig Tour Sheet v1.4.0 4 of 10 January 2013
Safety Details Daily Weekly Auxiliary Motor Shut-off Air Pack Inspected CAODC Level I All Signs In Place CAODC Level II Derrick Egress System Cathodic Protection Off Emergency Airhorn Tested Crew Truck Motor Shut-off Emergency Response Safety Meeting Crown Saver Function Test Escape Buggy Inspected Drawworks / Linkage Inspected Fall Arrest Systems Inspected (per use) Emergency Transportation Plan Posted Fire Extinguishers Checked No. 00 Equipment Grounded / Bonded Guy Lines Installed Secured Gas Detection Bump Test H2S Present Lockout System Compliance Kill Line Connected Secured Power to Pump Jack Off / Locked Out Secured Rescue Equipment Pump Motor Shut-off Rig Inspection Pump Relief Valve Proper Setting Safe Area Designated Rig Motor Shut-off Transporter Motor Shut-off Walk Around Inspection Safety Meeting Details xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Displayed daily checks are obtained from the Daily Safety Check pick list; additional items can be defined by a specific implementation. Displayed weekly checks are obtained from the Weekly Safety Check pick list; additional items can be defined by a specific implementation. The Safety Meeting Details field vertically expands as needed to display its contents. Service Rig Tour Sheet v1.4.0 5 of 10 January 2013
BOP Testing to Pressure Tests Accumulator Function BOP Operate Low High Initial Pressure 000000 kpa Pipe Ram 000 sec 00000000 kpa 00 min 00000000 kpa 00 min Final Pressure 000000 kpa Annular 000 sec 00000000 kpa 00 min 00000000 kpa 00 min Recharge 00 min 00 sec Blind Ram 000 sec 00000000 kpa 00 min 00000000 kpa 00 min Precharge Pressure 000000 kpa Safety Valve 00000000 kpa 00 min 00000000 kpa 00 min BOP Drill Pump Manifold 00000000 kpa 00 min 00000000 kpa 00 min Start 00:00 Pump Lines 00000000 kpa 00 min 00000000 kpa 00 min Stop 00:00 Well 00000000 kpa 00 min 00000000 kpa 00 min Duration 00 min 00 sec N 2 Bottle Pre-charge Pressures Bottle 1 000000 kpa Bottle 2 000000 kpa Bottle 3 000000 kpa Bottle 4 000000 kpa Bottle 5 000000 kpa Bottle 6 000000 kpa Bottle 7 000000 kpa Bottle 8 000000 kpa Bottle 9 000000 kpa Bottle 10 000000 kpa N 2 Backup Bottle Pre-charge Pressures Bottle 1 000000 kpa Bottle 2 000000 kpa Bottle 3 000000 kpa Bottle 4 000000 kpa Bottle 5 000000 kpa The Duration field is calculated by the system as the elapsed time between the Start and End values. The number of Bottle fields displayed varies depending on how many bottle pre-charge pressures are recorded. Service Rig Tour Sheet v1.4.0 6 of 10 January 2013
Well Servicing Code Description Quantity Per Rate Total 00000 Full Rate 000.0 hour $000.00 $00,000.00 00000 Rig Hours @ Flow Rate 000.0 hour $000.00 $00,000.00 00000 Rig Hours @ 1/2 Rate 000.0 hour $000.00 $00,000.00 00000 Overtime 000.0 hour $000.00 $00,000.00 00000 Stat Holiday Rate 000.0 hour $000.00 $00,000.00 00000 Extra Labour Rate 000.0 hour $000.00 $00,000.00 00000 Standby / Crew Retention 000.0 hour $000.00 $00,000.00 00000 Travel 000.0 hour $000.00 $00,000.00 00000 Crew Vehicle 000.0 km $000.00 $00,000.00 00000 Subsistence 000.0 man/day $000.00 $00,000.00 00000 PPE Fire Retardant Clothing 000.0 each $000.00 $00,000.00 00000 Equipment Repair 000.0 each $000.00 $00,000.00 00000 Permit 000.0 each $000.00 $00,000.00 Well Servicing Total $000,000.00 Displayed line items are obtained from the Well Servicing pick list; additional items can be defined by a specific implementation. The Description and Per fields are populated from the Value and UOM values from the Well Servicing pick list. The Total field is calculated by the system as the Quantity value multiplied by the Rate value on each line. The Well Servicing Total value is calculated by the system as the sum of the Total values. Service Rig Tour Sheet v1.4.0 7 of 10 January 2013
Boiler Charges Code Description Quantity Per Rate Total 00000 Boilerman Work 000.0 hour $000.00 $000,000.00 00000 Boilerman Travel 000.0 hour $000.00 $000,000.00 00000 Boilerman Travel Distance 000.0 km $000.00 $000,000.00 00000 Boilerman Vehicle 000.0 day $000.00 $000,000.00 00000 Boiler Rental Operating 000.0 day $000.00 $000,000.00 00000 Boiler Standby 000.0 day $000.00 $000,000.00 00000 Boiler Fuel 000.0 litre $000.00 $000,000.00 Boiler Charges Total $0,000,000.00 Displayed line items are obtained from the Boiler Charge pick list; additional items can be defined by a specific implementation. The Description and Per fields are populated from the Code, Value and UOM values from the Boiler Charge pick list. The Total field is calculated by the system as the Quantity value multiplied by the Rate value on each line. The Boiler Charges Total value is calculated by the system as the sum of the Total values. Consumables Code Description Quantity Per Price Total 00000 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 0,000.0 xxxxxxxxxxx $0,000.00 $000,000.00 00000 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 0,000.0 xxxxxxxxxxx $0,000.00 $000,000.00 00000 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 0,000.0 xxxxxxxxxxx $0,000.00 $000,000.00 Consumables Total $0,000,000.00 The number of rows listed corresponds to the number of consumables selected. Consumable items are added by selecting from the Description dropdown having values from the Consumable pick list. The Per field is populated by the system from the UOM value from the Consumable pick list. A specific implementation can show pre-selected consumables if it is desired to show commonly used items on every Tour sheet. The Description text should include the Quantity s unit of measure for the item as appropriate (like Well Servicing items). The Total field is calculated by the system as the Quantity value multiplied by the Price value on each line. The Consumables Total value is calculated by the system as the sum of the Total values. Service Rig Tour Sheet v1.4.0 8 of 10 January 2013
Third Party Equipment Description Supplier PO/Invoice # Cost xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx aaaaaaaaaaaa $000,000.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx aaaaaaaaaaaa $000,000.00 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxx aaaaaaaaaaaa $000,000.00 Third Party Total $0,000,000.00 The number of rows listed corresponds to the number of third party equipment selected. Third Party items are added by selecting from the Description dropdown having values from the Third Party Equipment pick list. The dropdown for the Supplier field contains values from a pick list of suppliers setup in a specific implementation. The Third Party Total value is calculated by the system as the sum of the Cost values. Billing Summary Type Amount Well Servicing $0,000,000.00 Boiler Charges $0,000,000.00 Consumables $0,000,000.00 Third Party Equipment $0,000,000.00 Total $0,000,000.00 The Amount values are populated by the system from the corresponding section. The Total value is calculated as the sum of the Amount values. Site Environment Weather Conditions xxxxxxxxxxxxxxxxxx Lease Conditions xxxxxxxxxxxxxxx Road Condition xxxxxxxxxxxxxxx Temperature 00.0 C Wind 000 km/h Weather Conditions dropdown contains values from the Weather Condition pick list: Clear, Overcast, Rain/Snow, Fog Lease Condition dropdown contains values from the Lease Condition pick list: Good, Fair, Poor, Muddy Road Condition dropdown contains values from the Road Condition pick list: Good, Fair, Poor, Muddy Service Rig Tour Sheet v1.4.0 9 of 10 January 2013
Operator Billing Information GL Account Code aaaaaaaaaaaaaaaa Business Unit aaaaaaaaaaaaaaaa Plant Code aaaaaaaaaaaaaaaa Sub Code aaaaaaaaaaaaaaaa Company Code aaaaaaaaaaaaaaaa Network & Activity # aaaaaaaaaaaaaaaa PO # aaaaaaaaaaaaaaaa Cost Centre # aaaaaaaaaaaaaaaa Work Order # aaaaaaaaaaaaaaaa Authorization Field Approver (Consultant) Operator Approver (Head Office) Name xxxxxxxxxxxxxxxxxxxxxxxxxxxxx Name xxxxxxxxxxxxxxxxxxxxxxxxxxxxx ID aaaaaaaaaaaaaaaa ID aaaaaaaaaaaaaaaa Phone 000-000-0000 Phone 000-000-0000 Signature Signature Disclaimer, Terms & Conditions Comments xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx The text on the Disclaimer, Terms & Conditions line is defined by system implementations and not stored within the xml data file. The Comments field vertically expands as needed to display its contents. DWR 0000-00-00-0000-00 Page 0 of 0 Each page includes the above footer line populated by the system with a reference, the page number and total number of pages. The reference format is yyyy-mm-dd-hhmm-nn where yyyy-mm-dd is the year, month and day, hhmm is the 24hr time and nn is a sequential version starting from 00. Service Rig Tour Sheet v1.4.0 10 of 10 January 2013