ÖZGEÇMİŞ. Zehra Deniz Turhan, Marmara Universitesi, Fen Bilimleri Enstitüsü, Supply Chain Reengineering and Application to an Industrial Company 2010

Transcription

1 ÖZGEÇMİŞ 1. Adı Soyadı: Şükran Nilvana KADIPAŞAOĞLU 2. Doğum Tarihi: Unvanı: Profesör 4. Öğrenim Durumu: Doktora Derece Alan Üniversite Yıl Lisans Muhasebe ve Finans Boğaziçi Üniversitesi 1983 Y. Lisans Endüstriyel Yönetim Clemson University 1986 Doktora Endüstriyel Yönetim Clemson University Akademik Unvanlar: Yardımcı Doçentlik Tarihi : 1993 Doçentlik Tarihi : 1999 Profesörlük Tarihi : Yönetilen Yüksek Lisans ve Doktora Tezleri 6.1. Yüksek Lisans Tezleri 6.2 Doktora Tezleri Tez Danışmanlığı Yavuz Acar, University of Houston, Decision and Information Sciences Department Supply Chain Modeling and Forecasting Method Selection, 2007 Tez Eş Danışmanlığı Serdal Bayram, Marmara Universitesi, Fen Bilimleri Enstitüsü, IT enabled Business Process Management and a Case-study in Procurement and Logistic Services Devam Ediyor Sultan Turhan, Marmara Universitesi, Fen Bilimleri Enstitüsü, Service-Oriented Architecture in Supply Chain Management for the Health Care Industry 2011 Sinan Apak, Marmara Universitesi, Fen Bilimleri Enstitüsü, A Decision Making Model for the Evaluation of Supply Chain and Execution Systems 2010 Zehra Deniz Turhan, Marmara Universitesi, Fen Bilimleri Enstitüsü, Supply Chain Reengineering and Application to an Industrial Company 2010 Sylvana Saudale, University of Houston, Industrial Engineering Department, The value of inventory information in dynamic distribution systems 2007 Raed Hussein, University of Houston, Decision and Information Sciences Department Modeling the supply chain swap problem in the petrochemicals industry 2005 Elias T. Kirche, University of Houston, Decision and Information Sciences Department A Comparison of Activity-Based Costing and the Theory of Constraints-Based Approaches for Profitability Analysis in Order Management and Production Planning Decisions 2002 Marvin Arostegui, University of Houston, Decision and Information Sciences Department

2 An empirical comparison of tabu search, simulated annealing and genetic algorithms for facilities locations problems 1997 Conchubhar F. O'Muirgheasa, University of Houston, Decision and Information Sciences Department, An Investigation into the Effect of More Accurate Measures of Distance on the Detailed Facility Layout Problem Yayınlar 7.1. Uluslararası hakemli dergilerde yayınlanan makaleler (SCI & SSCI & Arts and Humanities) Acar, Y.; Kadipasaoglu, S. N., and Schipperijn, P., A Novel Approach to Global Supply Chain Modeling: Assessment of the Impact of Demand, Supply and Lead-time Uncertainties on Performance", International Journal of Production Research, Vol. 48, No. 11, 1 June 2010, Acar, Y., Kadipasaoglu, S.N., Day, J., Incorporating Uncertainty in Optimal Decision Making: Integrating Mixed Integer Programming and Simulation to Solve Combinatorial Problems, Computers and Industrial Engineering, Vol. 56, pp: , Kadipasaoglu, S.N., Captain, J. and James, M. Polymer Supply Chain Management, International Journal of Logistics Systems and Management, Vol. 4, No. 2, , Arostegui, M., Kadipasaoglu, S.N. and Khumawala, B.M., An Empirical Comparison of Tabu Search, Simulated Annealing, and Generic Algorithms for Facilities Location Problems, International Journal of Production Economics, 103, pp: , Revere, L., Kadipasaoglu S. N. and Zalila, F., An Empirical Investigation into Six Sigma Critical Success Factors, International Journal of Quality and Productivity Management, Vol. 1,No. 3, pp: , Kirche, L., Kadipasaoglu, S.N. and Khumawala, B.M., Maximizing Supply Chain Profits with Effective Order Management: Integration of ABC And TOC with Mixed Integer Modeling, International Journal of Production Research, Vol. 7, No. 1, pp: , April, Cem Canel and Sukran N. Kadipasaoglu, Quality Control Circles in the Veterans Administration Hospital, International Journal of Health Care Quality Assurance, Vol. 15, 6/7, pp; , April, Cem Canel and Sukran N. Kadipasaoglu, An Efficiency Study for a Student Health Center, International Journal of Health Care Quality Assurance, Vol. 15, 4/5, pp; , April, Conor O Muirgheasa, Sukran N. Kadipasaoglu, and Basheer M. Khumawala, An Investigation into the Effect of a More Accurate Measure of Distance on the Detailed Facility Layout Problem, Journal of Statistics and Management Systems.,Vol. 4, No. 3, pp , Kadipasaoglu, S.N., Xiang, W. and Khumawala, B.M., A Study on the Effect of the Extent and Location of Protective Capacity in Flow Systems, International Journal of Production Economics, Vol. 63, pp , Kadipasaoglu, S.N. and Sridharan, V, Manufacturing Resource Planning, Encyclopedia of Electrical and Electronics Engineering, pp: , 1999.

3 Kadipasaoglu, S.N., Peixoto, J.L., and Khumawala, B.M., Global Manufacturing Practices: An Empirical Investigation, Industrial Management and Data Systems., Vol. 99, No. 3, pp: , Kadipasaoglu, S.N., Xiang, W. and Khumawala, B.M., "Batch Scheduling in Multistage, Multiproduct Manufacturing Systems - An Application, International Journal of Operations and Production Management, Vol. 19, No. 4, , Hurley, S.F. and Kadipasaoglu, S.N., Wandering Bottlenecks: Speculating on the True Causes, Production and Inventory Management Journal, Vol. 39, No. 4, 1-4, Kadipasaoglu, S.N., Hurley, S.F., Foote, J.L. and Khumawala, B.M., An Investigation of the Relationship Between Global Manufacturing Practices and Outcomes in Machine Tools and Textile Industries, Journal of Operations Management, Vol. 16, , Kadipasaoglu, S.N., Xiang, W. and Khumawala, B.M., A Comparison of Sequencing Rules in Static and Dynamic Hybrid Flow Systems International Journal of Production Research, Vol. 35, No. 5, , Kadipasaoglu, S.N., Xiang, W. and Khumawala, B.M., A Note on Scheduling in Hybrid Flow Systems, International Journal of Production Research, Vol. 35, No. 5, , Kadipasaoglu, S.N. and Sridharan V, "Measurement of Instability in Multi-Level MRP Systems", International Journal of Production Research, Vol. 35, No. 3, , Kadipasaoglu, S.N., "The Effect of Freezing the MPS on Cost in Multi-Level MRP Systems", Production and Inventory Management Journal, 36:3, pp , Kadipasaoglu, S.N. and Sridharan V, "Alternative Approaches for Reducing Schedule Instability in Multistage Manufacturing under Demand Uncertainty", Journal of Operations Management, 13:3, pp , Duening, T. and Kadipasaoglu, S.N., Team-Driven Change in Higher Education: Three Principles of Employee Empowerment, Quality in Higher Education, Vol. 2:1, pp , Barrett R. and S.N. Kadipasaoglu, "Evaluation of Dispatching Rules in a Dynamic Flow Shop", Production and Inventory Management Journal, 31:1, pp.: 54-58, Uluslararası diğer hakemli dergilerde yayınlanan makaleler 7.3. Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında (Proceedings) basılan bildiriler Acar, Y., Kadipasaoglu, S.N., Albey, E. An Empirical Studyof Supply Chain Flexibility in a Global Supply Chain: Central vs Distributed Decision Making, Proceedings of the Annual Meeting of the Decision Science Institute, Acar, Y., Kadipasaoglu, S.N., Comparison of Bootstrap Simulation and Traditional Approach to Safety Stock Calculation, Proceedings of the Annual Meeting of the Decision Science Institute, 2010.

4 Acar, Y., Gardner, E., and Kadipasaoglu, Sukran, 2009, Evaluatıng Operatıonal Performance Of Forecast Methods In A Specıalty Chemıcal Supply Chaın Usıng Trade-Off Curves, Proceedings of the 2009 Annual Meeting of the Decision Science Institute, New Orleans. Acar Y. Kadipasaoglu S.N. and Day J.M. A General Approach for Incorporating Uncertainty in Optimal Decision Making, Proceedings of the Annual Meeting of the Decision Science Institute,Boston Kadipasaoglu, S.N., Murray, M. and Barbu, L, "Adaptive Manufacturing: Job Function Information Assessment" SAP Congress Proceedings, Dallas March 4 7, Kadipasaoglu, S.N., Murray, M. and Barbu, L, "Adaptive Manufacturing: Job Function Information Assessment Whitepaper", White Paper published by SAP America, Inc., April, Acar, Y., Kadipasaoglu, S.N. and P. Schipperijn, "The Integration of Supply Chain Optimization and Simulation to Understand the Relationship of Inventory and Service Level of a Specialty Chemicals Company", Annual Meeting of the Decision Science Institute, San Francisco, California Kadipasaoglu, S.N., Murray, M.J., and Barbu, L. "Adaptive Manufacturing: Job Function Information Assessment Whitepaper", published by SAP America, Inc., April 2005, also presented at the SAP Congress, Dallas, March Kadipasaoglu, S.N., Acar, Y. and Schipperijn, P., "The Integration of Supply Chain Optimization and Simulation to Understand the Relationship of Inventory and Service Level of a Specialty Chemicals Company" Proceedings of the Decision Science Institute, San Francisco, 11/2005. Reveree, L. Kadipasaoglu, S.N., and Zalila, F., "An Empirical Investigation into Critical Six Sigma Success Factors" Proceedings of the Decision Science Institute, San Francisco, 11/2005. Kadipasaoglu, S.N., Acar, Y., and Schipperijn, P. "Global Supply Chain Optimization for a Specialy Chemicals Company", Global Manufacturing Research Group Meeting, Istanbul, Turkey, July 3-9, Kirche, L., Kadipasaoglu, S.N., and Khumawala, B.M., Assessing the Profitability of Various Order Acceptance Policies in a Capacity-Constrained Production Environment, the 2002 Annual Meeting of the Decision Sciences Institute, San Diego, California. Kadipasaoglu, S.N., Ramchand, L. and Khumawala, B.M., An Assessment Of Financial Outcomes For Supply Chain Council Member Firms, the 2002 Annual Meeting of the Decision Sciences Institute, San Diego, CA. Kadipasaoglu, S.N. O Muirgheasa, C., Integrating Statistical Process Control into the Supply Chain Management in Process Industries Proceedings of Aspenworld 2000 Conference, February Kirche, L., Kadipasaoglu, S.N. and Khumawala, B.M., Empirical Investigation of Student s Learning on the Operations Management (OM) Core Course, Proceeding of the Annual Meeting of Production and Operations Management Society, April Kadipasaoglu, S.N., Supply Chain Management, Proceedings of the 3 rd Annual Technology Conference in Monterrey Technical University, Chihuahua, Mexico, April Sukran Kadipasaoglu, Basheer Khumawala, Supply Chain Relationships: The New Competitive Challenge, Proceedings of the Pan Pacific Conference, Gold Coast Australia, June 2000.

5 Sukran Kadipasaoglu and Basheer Khumawala, An Investigation into the Determinants of Customer Service: An Empirical Evaluation,, Proceedings of the Annual GMRG International Meeting, London, Ontario, August O Muirgheasa, C., Kadipasaoglu, S.N., Khumawala, B.M., Statistical Process Control into the Supply Chain Management in Process Industries Proceedings of the Annual Decision Science Institute, November, Kirche, E.T., Zalila, F. and Kadipasaoglu, S.N., "Determining Best Practices in Supply Chain Management: A Structural Equation Modeling Framework", Proceedings of the Annual Meeting of the Decision Sciences Institute, New Orleans, LA, November Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., "An Empirical Investigation into Tardiness and Its Causes in Machine Tools and Textile Industries", Proceedings of the Annual Meeting of the Decision Sciences Institute, New Orleans, LA, November Zalila, F., Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., " Tabu Search, Rollout Algorithms, and Beam Search Heuristic: Application for the Airline Gate Assignment Problem", 5 th International Conference of the Decision Sciences Institute, Athens, Greece, July 4-7, Wicks, A., Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., "A Comparison of Three General Purpose Algorithms to Tabu Search in the Facility Location Class of Combinatorial Optimization Problem", 5 th International Conference of the Decision Sciences Institute, Athens, Greece, July 4-7, Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., "An Investigation into the Determinants of Customer Service: An Empirical Evaluation", Proceedings of the 15 th Pan Pacific Conference, Nadi, Fiji, May 31-June 2, Zalila, F., Kadipasaoglu, S.N. and Khumawala, B.M., "Evaluating the Performance of the Tabu Search Heuristic in Solving the Airline Gate Assignment Problem", Proceedings of the 15 th Pan Pacific Conference, Nadi, Fiji, May 31-June 2, Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., "An Investigation into the Determinants fo Customer Service: An Empirical Evaluation", Proceedings of the 15 th Pan Pacific Conference, Nadi, Fiji, May 31-June 2, Kadipasaoglu, S.N. and Sridharan V, "Heuristic Applications to the N-job M-machine Scheduling Problem", Proceedings of the Annual Meeting of the Decision Sciences Institute, Las Vegas, November, Kadipasaoglu, S.N. and Sridharan V, "An Empirical Evaluation of the Benefits of Freezing the Schedule". ", to be presented at the Annual Meeting of the Decision Sciences Institute, Las Vegas, November, Kadipasaoglu, S.N., Arostegui, M.A., Zalila, F., Peixoto, J.L. and Khumawala, B.M., "Job-Shop Scheduling: Applications of Tabu Search, Simulated Annealing, Genetic Algorithms And Beam Search", Proceeding of the Euro Working Group on Project Management and Scheduling, Istanbul, Turkey, July 1998.

6 Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., "Global Manufacturing Practices: An Empirical Investigation", Production Operations Management Society South Africa Meeting, Cape Town, South Africa, June O Muirgheasa, C., Kadipasaoglu, S.N. and Khumawala, B., "An Investigation into the Effect of More Accurate Measures of Distance on the Detailed Facility Layout Problem", Proceedings of the Annual Meeting of the Decision Sciences Institute, San Diego, CA, November Arostegui Jr., M., Kadipasaoglu, S.N. and Khumawala, B.M., "An Empirical Evaluation of Tabu Search, Simulated Annealing, and Genetic Algorithms on Facilities Location Problem", Proceedings of the Annual Meeting of the Decision Sciences Institute, San Diego, CA, November Anderson, E. A. and Kadipasaoglu, S.N., "Strategic Quality Management: Manufacturing and Service", Proceedings of the Annual Meeting of the Decision Sciences Institute, San Diego, CA, November Kadipasaoglu, S.N. and Duening, T., "Three Key Principals in Achieving Organizational Change", Houston Business Journal, Awards for Quality Program Guide, October Presentation of studies on "Global Manufacturing Practices", Hong Kong Polytechnic University, Hong Kong, June 1 st, Kadipasaoglu, S.N., Peixoto, J.L., Hurley, S.F. and Khumawala, B.M., " Best MPC Practices: A Comparative Analysis", Proceedings of the 14 th Pan Pacific Conference, Kuala Lumpur, Malaysia, June Kadipasaoglu, S.N., Peixoto, J.L. and Khumawala, B.M., "An Empirical Investigation of the Relationship between MPC Improvement Programs and Performance Outcomes", Proceedings of the 14 th Pan Pacific Conference, Kuala Lumpur, Malaysia, June Kadipasaoglu, S.N., Hurley, S.F., Foote, J.L. and Khumawala, B.M., "An Investigation of the Relationship between Global Manufacturing Practices and Outcomes", Proceedings of the Annual Meeting of the Decision Sciences Institute, Orlando, FL, Kadipasaoglu, S.N., Xiang, W., Hurley, S.F. and Khumawala, B.M., "A Study on the Effect of the Extent and Location of Protective Capacity in Flow Systems", Proceedings of the Annual Meeting of the Decision Sciences Institute, Orlando, FL, Kadipasaoglu, S.N., Peixoto, J.L., Hurley, S.F. and Khumawala, B.M., "Global Manufacturing Practices: An Empirical Investigation", Latin-Iberian-American Congress on Operations Research and Systems Engineering, Rio de Janeiro, R.J., Brazil, Khumawala, B.M., Kadipasaoglu, S.N. and Canel, C., "International POM Course: Design Implementation", Latin-Iberian-American Congress on Operations Research and Systems Engineering, Rio de Janeiro, R.J., Brazil, Kadipasaoglu, S.N., Hurley, S.F., Foote, J.L. and Khumawala, B.M., "An Investigation of the Relationship between Manufacturing Practices and Outcomes in Machine Tools and Textile Industries", Proceedings of the Global Manufacturing Research Group (GMRG) Workshop, Cranfield, England, 1996.

7 Xiang, W., Kadipasaoglu, S.N. and Khumawala, B.M., "Batch Scheduling in a Multi-stage, Multiproduct Manufacturing System---An Application in China", Proceedings of the Annual Meeting of the Decision Sciences Institute, Boston, MA, Kadipasaoglu, S.N., Xiang, W. and Khumawala, B.M., "Hybrid Flow Shop Systems: Extensions and Comparative Analysis", Proceedings of the Third International Conference, Decision Sciences Institute, Puebla, Mexico, Kadipasaoglu, S.N., Xiang, W. and Khumawala, B.M., "Scheduling Hybrid Flow Systems: An Experimental Investigation" Proceedings of the Pan-Pacific Conference XII, Queenstown, New Zealand, Kadipasaoglu, S.N., Rios, A. and Canel, C., "Manufacturing Planning and Control in the Maquiladora: A Limited Survey", Proceedings of the Annual Meeting of the Southeast Decision Sciences Institute, Wilmington, NC, Kadipasaoglu, S.N. and Sridharan V. and La Forge, L.R., "Freezing the MPS in Multi-Level MRP Systems with End-Item Safety Stock", Proceedings of the Annual Meeting of the Decision Sciences Institute, Honolulu, HAW, Kadipasaoglu, S.N. and Sridharan V., "Freezing the MPS in Multi-Level MRP Systems under Demand Uncertainty", Proceedings of the Annual Meeting of the Decision Sciences Institute, Washington D.C., MD, Kadipasaoglu, S.N., "A Study on Nervousness in Multi-Level MRP Systems under Demand Uncertainty", Proceedings of the Annual Meeting of the Decision Sciences Institute, San Francisco, CA, Kadipasaoglu, S.N., "Measurement of Instability in Multi-Level MRP Systems", Proceedings of the Annual Meeting Southeastern Chapter of the Institute of Management Sciences, Myrtle Beach, SC, Yazılan uluslararası kitaplar veya kitaplarda bölümler La Forge, R.L., Kadipasaoglu, S.N. and Sridharan, V, "Managing Schedule Stability", Encyclopedia of Production and Operations Management, June Khumawala, B.M. and Kadipasaoglu, S.N. Facilities Location Decisions, Encyclopedia of Production and Operations Management, June Ulusal hakemli dergilerde yayınlanan makaleler 7.6. Ulusal bilimsel toplantılarda sunulan ve bildiri kitabında basılan bildiriler 7.7. Diğer yayınlar Kadipasaoglu, S.N., Taylor, G. and Green H., Enterprise Agility, European Chemical News, May Kadipasaoglu, S.N., "The Static and Dynamic Nature of Organizational Quality", Houston Business Journal, Awards for Quality Program Guide, October 1997.

8 7.8. Uluslararası atıflar : Toplam 132 atıf Sukran Kadipasaoglu from 1990 to 2010: Papers: 16 Cites/paper: 8.25 h-index: 6 AWCR: Citations:132 Cites/author: g-index: 11 AW-index: 3.20 Years: 19 Papers/author: 7.50 hc-index: 3 AWCRpA: 4.42 Cites/year:6.95 Authors/paper:2.50 hi-index: 2.25 e-index: 8.94 hi,norm: 4 hm-index: 3.17 Query date: Hirsch a=3.67, m=0.32 Contemporary ac=4.56 Cites/paper 8.25/3.0/0 (mean/median/mode) Authors/paper 2.50/2.5/multi (mean/median/mode) 2 paper(s) with 1 author(s) 6 paper(s) with 2 author(s) 6 paper(s) with 3 author(s) 2 paper(s) with 4 author(s) 8. Projeler Ulusal & Uluslararası Projeler (DPT, TÜBİTAK, AB, vb) 9. İdari Görevler Bolum Baskani, Endustri Muhendisligi Bolumu (Ekim 2009 Subat 2011 ) Muhendislik Fakultesi, Bahcesehir Universitesi, Istanbul Koordinatör, Tedarik Zinciri ve Lojistik Yönetimi Yüksek Lisans Programı (Ekim 2009 Subat 2011 Fen Bilimleri Enstitüsü, Bahçeşehir Universitesi, Istanbul Direktor, Supply Chain Research Center (April 2004 June 2008) C.T. Bauer College of Business, University of Houston, Houston, TX, USA. Başkan Yardımcısı, Council of Supply Chain Management Professional Türkiye Yuvarlakmasası ( ), İstanbul. 10. Bilimsel ve Mesleki Kuruluşlara Üyelikler Decision Sciences Institute, USA. Council of Supply Chain Management Professional Türkiye Yuvarlak Masası, İstanbul (Merkez USA) 11. Ödüller R. Wayne & Kathryn E. Payne Faculty Excellence Award for Excellence in Teaching, University of Houston,2003. Melcher Faculty Honor Award, University of Houston, CBA Partner Faculty Honor Award. University of Houston, Halliburton Faculty Research Award. University of Houston, Goldratt Educational Grant, Goldratt Institute, 1994.

9 This grant is given in the form of rights to use the Goldratt s BUILD program and the waiver of annual maintenance, usage and support fees. The purpose is to encourage teaching and research in the application of Theory of Constraints. Research Initiation Grant, University of Houston, This grant supported the project titled "A Study on Scheduling in Hybrid Flow Systems", received from the University of Houston RIG program, February Alliance with Aspen Technology, Inc. University Program for which the department received state-of-the-art Supply Chain Software and Ph.D. student training. Alliance with SAP America, Inc. to use SAP R/3 software in class in the DISC department. 12. Son iki yılda verdiğiniz lisans ve lisansüstü düzeydeki dersler için aşağıdaki tabloyu doldurunuz. Akademik Haftalık Saati Öğrenci Dönem Dersin Adı Yıl Teorik Uygulama Sayısı Güz İlkbahar BUS 3464 OperationsResearch 3 28 COOP 4409 Supply Chain and Güz Logistics Management IE 5201 Principles of Engineering Management IE 5212 Quality Management İlkbahar IE 3006 Production Planning and Control Güz IE 5201 Principles of Engineering Management IE 4997 Capstone Project I IE 4209 Enterprise Resource Planning with SAP İlkbahar IE 5300 Enterprise Resource Planning with SAP Not: Açılmışsa, yaz döneminde verilen dersler de tabloya ilave edilecektir.