Refrigerated Design Texas

Transcription

1 Refrigerated Design Texas Refrigerated Design Texas 1808 FM 66 / P.O. Box 622 Waxahachie, TX / Toll Free (800) Ph. (972) Fax (972)

2 Table of Contents RDT Welcome CHDSS / ZS Outdoor Air-Cooled Line RDDC Outdoor Air-Cooled Line RDMC Outdoor Dual Compressor Line RDPL Indoor Parallel Line IRW Indoor Water-Cooled Line IRP Indoor Air-Cooled Line Evaporator Coil Information Technical Data: ADT / LET Evaporator Coils Technical Data: SM / SME Evaporator Coils RDT Facilities

3 Refrigerated Design Texas Message from the President: The consideration you are extending to RDT is greatly appreciated. Our place in the industry has been enhanced by the personal relationships we have acquired through the years. We have been in the business for 38 years, with a majority of that time devoted to the design and build of refrigerated products. We have seen compressors, refrigerants, and controls come and go. Many new innovations have advanced our industry and we are honored to be a part of a rapidly expanding technology that becomes more interesting everyday. We are constantly in search of ways to better our product. We tailor our efforts toward what gives you a longer lasting and more economical product. Believe it or not, both can be achieved to a great degree. RDT is committed to protecting your interest. That is how we got here and that is how we intend to stay. We have enjoyed the confidence placed in us by so many and fully intend to continue earning your trust. My family, my associates, and all of us here at RDT thank you for your unwavering support. We will always be here to see to your needs. Sincerely, Randall Dyess President 3

4 Models CHDSS / ZS Designed for Maximum Dependability and Service 1/4 hp ball bearing fan motors provide years upon years of run time. Our unit includes heavy duty blades and OSHA approved fan guards. Note: CHDSS1-2 Shown Entire weather cover 304 brushed stainless steel. This unit is designed with no external fasteners and no unfinished corners to provide years of operation. RDT s modular base design allows individual units to be exchanged as needed. RDT utilizes the reliable Copeland Copelametic semi-hermetic Compressors (on the CHDSS model line). RDT utilizes the latest technology. Copeland Glacier Scroll Compressors (on the ZS model line). All welded sight glass and drier CHDSS / ZS St Outdoor Air Cooled Stainless Steel Housing Dedicated Condenser Up 4

5 Refrigerated Design Texas Oversized individual condenser designed for high ambient summer temperatures. Stainless steel hail guards protect units from any type of abuse. RDT provides its customers with pre-piped suction and liquid lines. Optional Pre-Wired Fused Disconnect RDT provides lifting eyes on all four corners of our unit. UL approved stainless steel electrical enclosure Individual Square D Breaker for each compressor. Solid state defrost clock eliminates mechanical gears and springs. Johnson Micro Set Controls with stainless steel super-hose ar Components Defrost Contactor locks out until compressor pumps down, eliminating erroneous breaker trips. Please Note: Technical Data on Page 6 to 5 Compressors (One Tier) and 10 Compressors (Two Tier) Proven Performance 5

6 Models CHDSS / ZS TECHNICAL DATA Medium Temperature Compressors /60/3*** SEMI-HERMETIC SCROLL EVAPORATOR COILS* MODEL HP RLA** MODEL HP RLA** HAG ADT-040 / SM KAN ADT-070 / SM KAM ADT-104 / SM-102 ZB10KCE KAGA ADT-120 / SM--134 ZB11K4E KAKA ADT-156 / SM-156 ZB13KCE ERF (2) ADT-130 / (2) SM-134 ZF09K4E NRB (2) ADT-180/ (2) SM-208 ZF13K4E (2) ADT-260 / (2) SM-249 ZF15K4E Low Temperature Compressors /60/3 SEMI-HERMETIC SCROLL EVAPORATOR COILS* MODEL HP RLA** MODEL HP RLA** KAJA-011E LET KALA-016E LET EAVA-021E LET-090 ZF06K4E LAHA-032E LET-120 / LET-140 ZF11K4E DF3-030E LET-180 ZF15K4E DL3-040E LET-240 / (2)LET-120 ZF18K4E DA3-060E LET-280 / (2) LET-140 ZF24K4E (2) LET-180 ZF33K4E (2) LET-240 ZF40K4E *The Last Three Digits of the Evaporator Coil Number Designates BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. **The RLA s Listed Here Include Condenser Fan Motors. ***The ZB10KCE, ZB11KCE, and ZB13KCE are /60/1. 6

7 Refrigerated Design Texas Model RDDC Designed for Heavy Duty Use RDT s Electrical Panel combines all electrical elements in one, easy-toaccess location. Ball Bearing fan motors provide years upon years of run time. Our RDDC unit includes heavy duty blades and OSHA approved fan guards. Each RDDC is finished in a 304 Stainless Steel Housing. Each unit features head cooling fans to keep the low temperature compressors cool and allow them to operate at maximum efficiency. Each RDDC utilizes the latest in Copeland Discus Compressors Each RDDC features a louvered front that provides ventilation, easy compressor access and a clean look. Each RDT unit provides lifting eyes on all four corners for easy unit placement. Compressor Data 60 Hz, 3 Phase Compressor Data 60 Hz, 3 Phase R-22 Med. Temp. +25º BTU Rated Figure Comp. HP V Amperage 460V Amperage R-404a Low Temp. -20º BTU Rated Figure Comp. HP V Amperage 460V Amperage 3DB3A , DF3A , DS3A , DA , DH , DJ , DH , DJ , DS3A100E 49, DA3-101E 51, DL3-150E 68, DT3-220E 81, DL3-270E 102, DT3-300E 114, Please Note: More configurations are available. Amperages do not include condenser fan motors. Please consult RDT directly for the latest information. Outdoor Air Cooled Dual Compressor Reliable Time-Tested Performance 7

8 MODEL RDMC MEDIUM TEMP COMPRESSORS /60/3*** SCROLL SEMI-HERMETIC MODEL HP RLA** MODEL HP RLA** EVAPORATOR COILS* KAN ADT-070 / SM KAM ADT-104 / SM-102 ZB10KCE KAGA ADT-120 / SM--134 ZB13KCE KAKA ADT-156 / SM-156 ZF09K4E ERF (2) ADT-130 / (2) SM-134 ZF13K4E NRB (2) ADT-180 / (2) SM-208 *The Last Three Digits of the Evaporator Coil Number Designate the BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. **RLA s Do Not Include Evaporator Fan Motor. ***The ZB10KCE and ZB13KCE are /60/1. NOTE: For More System Options, Please Contact RDT Directly. The RDMC now supports up allowing more flexibility Standard Features: All Stainless Steel Housing Stainless Steel One Piece Louvers Factory Pre-Piped and Pre-Wired Ball Bearing Fan Motor Low Ambient Control System Rugged Base, Tubular Steel, Polyurethane Painted Fresh Air Over Compressors One Point Electrical Electric Defrost Pre-Wired Time Clocks Compressor Lock Out During Defrost Cycle Stainless Steel Super Hose Connections Micro Set Dual Pressure Control Multi-Circuited Condenser and Oversized Receiver Aluminum Fin Copper Tube Condenser Crankcase Heater Suction Filter Sight Glass, Drier, Liquid Line Valve (All Welded) OSHA Approved Fan Guard Outdoor Air Cooled Vertical 8

9 Refrigerated Design Texas Designed for Maximum Dependability and Service LOW TEMP COMPRESSORS /60/3 SCROLL SEMI-HERMETIC MODEL HP RLA** MODEL HP RLA** EVAPORATOR COILS* KALA-016E LET-065 ZF06K4E EAVA-021E LET-090 ZF11K4E LAHA-032E LET-120 / LET-140 ZF15K4E DF3-030E LET-180 ZF18K4E DL3-040E (2) LET-120 ZF24K4E DA3-060E (2) LET-140 to 15 compressors, on larger jobs. *The Last Three Digits of the Evaporator Coil Number Designate the BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. **RLA s Do Not Include Evaporator Fan Motor. NOTE: For More System Options, Please Contact RDT Directly. Optional Features: Copeland Glacier Scroll Compressor Technology (Please Consult Factory for Latest Information) Fused Disconnect Suction Accumulator Oil Separator Air Flow Multi-Circuited 9

10 Model RDPL Liquid Line Solenoids Evaporator Pressure Regulator Diagnostic Centers sound an alarm if any of the following are detected: compressor overload, low liquid refrigerant level in the receiver, low oil pressure, or high system head pressure. They can operate audible or visible in-store alarms, or can automatically phone a service location. Complete Manifold System - Pre-Piped and mounted with temperature control, electric solenoid and service valve as needed Additional Standard Features: R-404a Low Temperature. R-22 Medium Temperature. Heavy-Gauge Welded Steel Frame Primed and Painted with two (2) Coats of Polyurethane. Receiver With Relief Valve and Liquid Level Indicator. UL Listed and Labeled Pre-Wired Control Panels Feature a Single-Point Electrical Connection, Individually Fused Circuits with Toggle Switches, Definite Purpose Contactors, and Breakers. Oil Float and Return System On Dual Uneven And Three or More Compressor Systems. Compressors may be Even or Uneven Horsepowers, with Satellites; Up to Six Compressors on a Single System. Head Fans Provided on All Low-Temperature Compressors. Stainless Steel Super Hose Connection R-404a Low Temp. -20º Sentronic Oil Switch Large Capacity, Oversize Receiver - For remote condenser operation Compressor Data BTU Rated Figure Comp. HP 60 Hz, 3 Phase V Amperage 460V Amperage 2DL3-040E 21, DA3-060E 25, DB3A075E 36, DF3A090E 44, DS3A100E 49, DL3-150E 68, DT3-220E 81, DT3-300E 114, The RDPL is RDT s Su R-22 Med. Temp. +25º Compressor Data BTU Rated Figure Comp HP 2DC , DL , DA3A , DB3A , DS3A , DA , DH , DJ , DH , DJ , Parallel System Allows One Compressor to 10

11 Refrigerated Design Texas Pre-Wired Defrost Panel (Where Electric Defrost Is Required) Designed for Maximum Capacity and Versatility Oil Reservoir Suction Accumulator - Prevents Flood Back Liquid Site Glass Oil Separator - Assures adequate oil supply under varying load conditions Replaceable Core Suction Filter Optional Features: R-22 Low Temp. With Demand Cooling Remote Air Cooled Condensers, Water Cooled, Evaporator Cooled Replaceable Core Liquid Filter Drier perior Parallel System 60 Hz, 3 Phase V Amperage 460V Amperage R-22 Low Temp. with Demand Cooling -20º Percentage Liquid Level Indicator - For quick, accurate reference of refrigerant charge, with an optional alarm (can be in communication package) Compressor Data BTU Rated Figure Comp. HP 60 Hz, 3 Phase V Amperage 460V Amperage 2DF , DA , DB3A , DS3A , DL , DT , DT , Please Note: More configurations are available. Please contact the factory directly for the latest information. NOTE: Dimensions of Racks Conform to the Number of Compressors. Height Is 72 on Most Applications. Front-to-Back Dimensions will be 40, with 30 Length Required per Compressor. (Example: A 3-Compressor Rack would be 40 X 90 X 72 ) Run Multiple Evaporator Coils 11

12 MODEL IRW MEDIUM TEMP COMPRESSORS /60/3** SCROLL SEMI-HERMETIC MODEL HP RLA MODEL HP RLA EVAPORATOR COILS* KAN ADT-070 / SM-076 ZB10KCE KAM ADT-104 / SM-102 ZB11KCE KAGA ADT-120 / SM--134 ZB13KCE KAKA ADT-156 / SM-156 ZF09K4E ERF (2) ADT-130 / (2) SM-134 ZF13K4E NRB (2) ADT-180/ (2) SM-208 *The Last Three Digits of the Evaporator Coil Number Designates BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. **The ZB10KCE, ZB11KCE, and ZB13KCE are /60/1. NOTE: For More System Options, Please Contact RDT Directly. The IRW is RDT s Indoor Water Standard Features: Micro Set Dual Pressure Control Stainless Steel Super Hose Connections Individual Oversized Condenser Circuit and Receiver One Point Electrical Electric Defrost Pre-Wired Time Clocks Compressor Lock Out During Defrost Cycle Pre-Piped To Common Supply and Return Header Adjustable Water Regulators Vibration Eliminator for Quiet Leak-Free Operation Sight Glass Drier Suction Filter Inlet and Outlet Rotolock Valves Strong Structural Steel Rack Indoor Water Cooled 12

13 Refrigerated Design Texas Designed for Maximum Dependability and Service LOW TEMP COMPRESSORS /60/3 SCROLL SEMI- EVAPORATOR COILS* HERMETIC MODEL HP RLA MODEL HP RLA KALA-016E LET-065 ZF06K4E EAVA-021E LET-090 ZF11K4E LAHA-032E LET-120 / LET-140 ZF15K4E DF3-030E LET-180 ZF18K4E DL3-040E (2)LET-120 ZF24K4E DA3-060E (2) LET-140 Cooled Refrigeration System * The Last Three Digits of the Evaporator Coil Number Designates BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. NOTE: For More System Options, Please Contact RDT Directly. Optional Features: Fused Disconnect Suction Accumulator Oil Separator Pre-Piped Crankcase Pressure Regulator Rack Can Be Expanded To Accommodate Up To Ten Units Rack can be Two-Tier to allow for space conservation. Quiet Design 13

14 MODEL IRP MEDIUM TEMP COMPRESSORS /60/3*** SCROLL SEMI-HERMETIC MODEL HP RLA** MODEL HP RLA** EVAPORATOR COILS* KAN ADT-070 / SM-076 ZB10KCE KAM ADT-104 / SM-102 ZB11KCE KAGA ADT-120 / SM--134 ZB13KCE KAKA ADT-156 / SM-156 ZF09K4E ERF (2) ADT-130 / (2) SM-134 ZF13K4E NRB (2) ADT-180/ (2) SM-208 *The Last Three Digits of the Evaporator Coil Number Designates BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. **The RLA s Listed Here Include Condenser Fan Motors. ***The ZB10KCE, ZB11KCE, and ZB13KCE are /60/1. NOTE: For More System Options, Please Contact RDT Directly. The IRP is RDT s Indoor air - dedicated condens e Standard Features: Factory Pre-Piped and Pre-Wired Ball Bearing Fan Motor Low Ambient Control System Rugged Base, Tubular Steel, Polyurethane Painted One Point Electrical Electric Defrost Pre-Wired Time Clocks Compressor Lock Out During Defrost Cycle Stainless Steel Super Hose Connections Micro Set Dual Pressure Control Multi-Circuited Condenser and Oversized Receiver Aluminum Fin Copper Tube Condenser Suction Filter Sight Glass, Drier, Liquid Line Valve (All Welded) OSHA Approved Fan Guard RDT s Indoor 14

15 Refrigerated Design Texas Designed for Maximum Dependability and Service LOW TEMP COMPRESSORS /60/3 SCROLL SEMI-HERMETIC MODEL HP RLA** MODEL HP RLA** EVAPORATOR COILS* KALA-016E LET-065 ZF06K4E EAVA-021E LET-090 ZF11K4E LAHA-032E LET-120 / LET-140 ZF15K4E DF3-030E LET-180 ZF18K4E DL3-040E (2)LET-120 ZF24K4E DA3-060E (2) LET-140 cooled, horizontal air flow, er, individual fan. *The Last Three Digits of the Evaporator Coil Number Designates BTU s in Hundreds. For More Information About Evaporator Coils, see page 16. **The RLA s Listed Here Include Condenser Fan Motors. NOTE: For More System Options, Please Contact RDT Directly. Optional Features: Fused Disconnect Suction Accumulator Oil Separator Pre-Piped Crankcase Pressure Regulator Rack Can Be Expanded To Accommodate Up To Ten Units Rack can be Two-Tier to allow for space conservation. Air-Cooled System 15

16 RDT s Pre-Pipe Pipe and Pre-Wire Feature Standard Features: Correct Refrigerant Nozzle Properly Installed Liquid Line Solenoid Mounted Inside Cover Pre-Wired to Switch and Thermostat All Welded Expansion Valve Pre-Piped Suction and Liquid Line with Copper Caps Pressure Tested Shipped Under Pressure to Assure Leak Proof System Pre-Wired Thermostat Pre-Wired NEMA Disconnect Switch with Waterproof Cover RDT s Value Added Package Is Unmatched In The Industry Correct Nozzle Installed All Welded Expansion Valve Installed Pump Down Solenoid Pre-Piped And Pre-Wired Thermostat Mounted And Pre-Wired Copper Caps Typical Evaporator Model ADT or LET Pre-Wired NEMA Disconnect With Weatherproof Cover Typical Evaporator Model SM or SME 16

17 Refrigerated Design Texas Walk-In Freezer: Model LET MODEL: FAN 208/1 HTR 208/1 HTR 208/3 INLET SUCTION DRAIN LBS LENGTH MODEL: FAN 208/1 HTR 208/1 HTR 208/3 INLET SUCTION DRAIN LBS LENGTH LET /2 OD 5/8 OD 3/4 MPT " LET /2 OD 7/8 OD 3/4 MPT " LET /2 OD 5/8 OD 3/4 MPT " LET /2 OD 1-1/8 OD 3/4 MPT " LET /2 OD 5/8 OD 3/4 MPT " LET /2 OD 1-1/8 OD 3/4 MPT " LET /2 OD 5/8 OD 3/4 MPT " LET /2 OD 1-1/8 OD 3/4 MPT " LET /2 OD 7/8 OD 3/4 MPT " LET /2 OD 1-1/8 OD 3/4 MPT " LET /2 OD 7/8 OD 3/4 MPT " LET /2 OD 1-1/8 OD 3/4 MPT " LET /2 OD 7/8 OD 3/4 MPT " NOTE: LAST THREE DIGITS OF COIL NUMBER DESIGNATE BTU IN HUNDREDS (I.E. LET-120 FOR 12,000 BTU) Walk-In Cooler: Model ADT MODEL: 115 V 208 V INLET SUCTION DRAIN LBS LENGTH MODEL: 115 V 208 V INLET SUCTION DRAIN LBS LENGTH ADT /2 OD 5/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 5/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 1 1/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 1 1/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 1 1/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " ADT /2 OD 1 1/8 OD 3/4 MPT " ADT /2 OD 7/8 OD 3/4 MPT " NOTE: LAST THREE DIGITS OF COIL NUMBER DESIGNATE BTU IN HUNDREDS (I.E. ADT-120 FOR 12,000 BTU) NOTE: WHEN MEDIUM - LARGER VELOCITY COILS ARE NEEDED FOR LARGER APPLICATIONS, PLEASE CONSULT THE FACTORY 17

18 Walk-In Freezer: Model SME MODEL FAN 208/1 HTR 208/1 INLET SUCTION DRAIN LBS LENGTH SME /2 OD 7/8 OD 3/4 FPT " SME /2 OD 7/8 OD 3/4 FPT " SME /2 OD 7/8 OD 3/4 FPT " SME /2 OD 7/8 OD 3/4 FPT " SME /2 OD 7/8 OD 3/4 FPT " SME /2 OD 1 1/8 OD 3/4 FPT " NOTE: LAST THREE DIGITS OF COIL NUMBER DESIGNATE BTU IN HUNDREDS (I.E. SME-130 FOR 13,000 BTU) Walk-In Cooler: Model SM MODEL 115V 208V INLET SUCTION DRAIN LBS LENGTH MODEL 115V 208V INLET SUCTION DRAIN LBS LENGTH SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 1 1/8 OD 3/4 FPT " SM /2 OD 7/8 OD 3/4 FPT " SM /2 OD 1 1/8 OD 3/4 FPT " NOTE: LAST THREE DIGITS OF COIL NUMBER DESIGNATE BTU IN HUNDREDS (I.E. SM-108 FOR 10,800 BTU) NOTE: WHEN MEDIUM - LARGER VELOCITY COILS ARE NEEDED FOR LARGER APPLICATIONS, PLEASE CONSULT THE FACTORY 18

19 Refrigerated Design Texas Our Facilities: Providing the best equipment to our customers requires RDT to ensure a safe and productive work environment. So, in 2001, RDT moved to its current 7 acre location in Waxahachie, Texas. Our large manufacturing area and ample office space ensures that RDT has the resources to continue to grow and at the same time provide the same service and customer satisfaction our customers have come to know. 19

20 Refrigerated Design Texas, Inc FM 66 / P.O. Box 622 Waxahachie, TX / Toll Free (800) Fax (972) Please note that RDT reserves the right to make changes in specification, at any time. Product information reflected in this catalog current as of August 2003.