AUTOMOTIVE Automotive Service Technology Programs Automotive Technology Programs BUSINESS AND FINANCE Accounting Programs

Transcription

1 Programs of Study Current curricula and course descriptions for all Gwinnett Technical College programs of study can be found on the college website at Program requirements may incur changes due to probes, consolidations, and new program formation. All changes will be kept up to date on the college website at in the respective program area. For the most accurate program requirements, please check the college website. AUTOMOTIVE Automotive Service Technology Programs MOPAR (CAP) College Automotive Program (AAS) Toyota T-TEN Program (AAS) Toyota T-TEN Program (diploma) Automotive Technology Programs Automotive Technology (AAS) Automotive Fundamentals (diploma) Nissan Dealership Technician Training Program (NDTTP) Automotive Chassis Technician Specialist (certificate) Automotive Climate Control Technician (certificate) Auto Electrical/Electronic Systems Technician (certificate) Automotive Engine Performance Technician (certificate) Automotive Engine Repair Technician (certificate) Automotive Transmission/Transaxle Tech Specialist (certificate) Heavy Diesel Service Technician (certificate) Diesel Power Generation (certificate) BUSINESS AND FINANCE Accounting Programs Accounting Technology (AAS) Accounting (diploma) Computerized Accounting Specialist (certificate) Office Accounting Specialist (certificate) Payroll Accounting Specialist (certificate) Tax Preparation Specialist (certificate) Business Administrative Technology Programs Business Administrative Technology (AAS) Business Administrative Technology (diploma) Administrative Support Assistant (certificate) Medical Billing Clerk (certificate) Medical Front Office Assistant (certificate) Microsoft Office Application Professional (certificate) Technical Specialist (certificate) Business Management Programs Business Management: General Mgt., Human Resource Mgt., Logistics Mgt., Operations Mgt., (AAS) Business Management (diploma) Human Resource Management Specialist (certificate)

2 PROGRAMS OF STUDY Logistics Management Specialist (certificate) Management and Leadership Specialist (certificate) Marketing Management Programs Marketing Management, Entrepreneurship, e-business, Retail Management, Professional Selling, Sports Marketing, Social Media (AAS) Marketing Management, Entrepreneurship, e-business, Retail Management, Professional Selling, Sports Marketing, Social Media (diploma) E-Commerce Marketer (certificate) Entrepreneurship (certificate) Marketing Specialist (certificate) Sales Representative (certificate) Small Business Marketing Manager (certificate) Sports Management (certificate) EARLY CHILDHOOD CARE AND EDUCATION Early Childhood Care and Education Programs Early Childhood Care and Education (AAS) Early Childhood Care and Education (diploma) Child Development Specialist (certificate) Early Childhood Care and Education Basics (certificate) Early Childhood Exceptionalities (certificate) Early Childhood Program Administration (certificate) Family Child Care Practitioner (certificate) COMPUTER SCIENCE Computer Information Systems Programs Computer Programming (AAS) Computer Programming (diploma) Game Development (AAS) Game Development (diploma) Information Security Specialist (AAS) Information Security Specialist (diploma) Internet Specialist Web Site Design (AAS) Internet Specialist Web Site Design (diploma) Networking Specialist (AAS) Networking Specialist (diploma) Cisco Network Specialist CCNA (certificate) Cisco CCNP Specialist (certificate) Game Developer (certificate) Cyber Crime Specialist (certificate) Data Center Specialist (certificate) Information Security Specialist (certificate) Internet Specialist Web Site Developer (certificate) Java Programmer (certificate) Linux/UNIX System Administrator (certificate) Network Administrator (certificate) PC Repair and Network Technician (certificate)

3 PROGRAMS OF STUDY CONSTRUCTION Air Conditioning Programs Air Conditioning Technology (AAS) Air Conditioning Technology (diploma) Building Maintenance (diploma) Air Conditioning Electrical Technician (certificate) Air Conditioning System Maintenance Technician (certificate) Photovoltaic Systems Installation & Repair Technician (certificate) Refrigeration System Service Technician (certificate) Carpentry and Construction Management Programs Residential Construction Management (AAS) Carpentry Residential (diploma) Residential Construction Management (diploma) Certified Construction Worker (certificate) Finish Carpenter (certificate) Framing Carpenter (certificate) Residential Construction Manager (certificate) Commercial Construction Management Programs Commercial Construction Management (AAS) Commercial Construction Building Inspector (certificate) Commercial Construction Contract Administrator (certificate) Commercial Construction Estimator (certificate) Sustainable Design and Construction (certificate) Drafting Programs Drafting Technology (AAS) Drafting Technology (diploma) Advanced CAD Technician (certificate) CAD Operator (certificate) Drafter s Assistant (certificate) Engineering Technology Engineering Technology (AAS) COSMETOLOGY Cosmetology Programs Cosmetology (diploma) Barbering (diploma) CULINARY AND HOTEL, RESTAURANT AND TRAVEL Culinary Arts Programs Culinary Arts (AAS) Culinary Arts (diploma) Prep Cook (certificate) Hotel, Restaurant, and Tourism Management Programs Hotel, Restaurant, and Tourism Management (AAS) Hotel, Restaurant, and Tourism Management (diploma) Event Coordinator (certificate) Food and Beverage Director (certificate)

4 PROGRAMS OF STUDY Hotel Management Specialist (certificate) Travel Agency Operations (certificate) HEALTH SCIENCE Associate Degree Nursing Program Registered Nursing Program (ADN) Associate Degree Nursing Bridge Option (ADN) Associate Degree Nursing Paramedic Bridge Option (ADN) Patient Care Assistant (certificate) Bioscience Programs Bioscience Technology (AAS) Bioscience Environmental Laboratory Technologist (certificate) Bioscience Regulatory Assurance Technologist (certificate) Clinical Research Professional (certificate) Dental Assisting Programs Dental Assisting (diploma) Basic Dental Assisting (certificate) Advanced Dental Assisting (certificate) Healthcare Programs Healthcare Science: Pre-Bioscience (certificate) Healthcare Science: Pre-Cardiovascular Technology (certificate) Healthcare Science: Pre-Diagnostic Medical Sonography (certificate) Healthcare Science: Pre-Health Information Technology (certificate) Healthcare Science: Pre-Nursing (certificate) Healthcare Science: Pre-Radiologic Technology (certificate) Healthcare Science: Pre-Respiratory (certificate) Healthcare Science: Pre-Surgical (certificate) Healthcare Science: Pre-Veterinary (certificate) Healthcare Assistant (certificate) Health Imaging and Informatics Programs Health Information Technology (AAS) Health Information Technology (certificate) Cardiovascular Technology (AAS) Diagnostic Medical Sonography (AAS) Radiologic Technology (AAS) Computed Tomography Clinical Specialist (certificate) Magnetic Resonance Imaging Specialist (certificate) Medical Assisting Programs Medical Assisting (diploma) Respiratory Care Program Respiratory Care (AAS) Surgical Technology Program Surgical Technology (AAS) Emergency Services Education Programs Paramedicine (AAS)

5 PROGRAMS OF STUDY Paramedicine (diploma) EMS Professions (diploma) Emergency Medical Responder - EMR (certificate) Emergency Medical Technician (certificate) Advanced Emergency Medical Technician- AEMT (certificate) Veterinary Technology Programs Veterinary Technology (AAS) Veterinary Technician Assistant (certificate) PUBLIC SAFETY AND SERVICE Criminal Justice Technology Programs Criminal Justice Technology (AAS) Criminal Justice Technology (diploma) HORTICULTURE Horticulture Programs Environmental Horticulture (AAS) Environmental Horticulture (diploma) Floral Designer (certificate) GIS Technology (certificate) Landscape Installation Technician (certificate) Landscape Design Technician (certificate) Sustainable Urban Agriculture Technician (certificate) WELDING Welding and Joining Technology Programs Welding and Joining Technology (diploma) Flux Cored Arc Welder (certificate) Gas Metal Arc Welder (certificate) Gas Tungsten Arc Welder (certificate) Advanced Shielded Metal Arc Welder (certificate) VISUAL ARTS AND DESIGN Photography Programs Photography (AAS) Photography (diploma) Digital Imaging Specialist (certificate) Interiors Programs Interiors (AAS) Interiors (diploma) Interior Design Assistant (certificate) Interior Design Sales Consultant (certificate) Interior Design and Color Consultant (certificate) Interior Technology (certificate) Faux and Decorative Painting (certificate) Kitchen and Bath Designer (certificate)

6 AUTOMOTIVE SERVICE TECHNOLOGY PROGRAMS Mopar CAP College Automotive Program Associate of Applied Science Degree CC23 Automotive service technology offers you the opportunity to prepare for a career with the Mopar Brand (Chrysler, Dodge, Jeep). The need for trained service and repair technicians, service writers, parts managers, and service managers continues to grow. Automotive service has become a career which demands comprehensive academic and technical training. You will learn service and repair procedures for some of the most popular and technically advanced automobiles. Graduates of the associate degree program have additional qualifications for promotion and advancement into supervisory positions. Students can only be awarded Mopar training credit by graduating from the Mopar college automotive program, associate of applied science degree. Students must complete their general core classes in the semester that the program director has designated to be successful in this program. Training is oriented toward understanding and servicing Mopar Brand automobiles. Students may become certified by taking the ASE (Automotive Service Excellence) certification tests administered in eight areas by ACT (American College Testing). This program is only offered fulltime, during the day. (Program Length: 5 Semesters Minimum) General automotive technician, basic automotive service technician, brake and front end specialist, transmission specialist, air conditioning and electrical specialist, engine specialist, computer systems specialist, engine performance specialist, service advisor, service writer, and parts attendant (59 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 14 Hours ACAP 1000 Intro to Mopar Dealer Systems ACAP 1060 Mopar Electrical Systems General Education Area III - MATH 1111, MATH 1100 or MATH 1101 ACAP 1040 Mopar Steering and Suspension ACAP 1050 Mopar Brakes ACAP 1070 Mopar HVAC Systems ACAP 2010 Mopar Internship I General Education Area I - ENGL

7 AUTOMOTIVE SERVICE TECHNOLOGY PROGRAMS 3rd Semester 9 Hours 4th Semester 13 Hours ACAP 2020 Mopar Internship II ACAP 2030 Mopar Internship III General Education Area IV* 5th Semester 11 Hours ACAP 1020 Mopar Automatic Transmissions ACAP 1030 Mopar Drivetrains General Education Elective* ACAP 1010 Mopar Engine Systems ACAP 1080 Mopar Engine Performance ACAP 2040 Mopar Internship IV General Education II* 59 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Toyota T-TEN Program Associate of Applied Science Degree AST3 Automotive service technology offers you the opportunity to prepare for a career with a Toyota or Lexus dealer service department. The need for trained service and repair technicians, service writers, parts managers, and service managers continues to grow. Automotive service has become a career which demands comprehensive academic and technical training. You will learn service and repair procedures for some of the most popular and technically advanced automobiles. Graduates of the associate degree program have additional qualifications for promotion and advancement into supervisory positions. Training is oriented toward understanding and servicing Toyota automobiles. Prospective students must be accepted into the program. Upon completion of the program, the student will be awarded an Associate of Applied Science Degree in automotive service technology. Students may become certified by taking the ASE (Automotive Service Excellence) certification tests administered in eight areas by ACT (American College Testing). This program is only offered fulltime, during the day. (Program Length: 4 Semesters) General automotive technician, basic automotive service technician, brake and front end specialist, transmission specialist, air conditioning and electrical specialist, engine specialist, computer systems specialist, engine performance specialist, service advisor, service writer, and parts attendant. 105

8 AUTOMOTIVE SERVICE TECHNOLOGY PROGRAMS (61 CREDIT HOURS) 1st Semester 16 Hours 2nd Semester 16 Hours AUTS 1010 Intro to Toyota Automotive AUTS 1020 Toyota Electrical Systems AUTS 1030 Toyota Brake Systems General Education Area III - MATH 1111, MATH 1100 or MATH 1101 AUTS 1050 Toyo Suspension & Steering System AUTS 2020 Toyota Manual Drive Train & Axles AUTS 2030 Toyota Automatic Trans & Transaxles General Ed Area I ENGL rd Semester 13 Hours 4th Semester 16 Hours AUTS 1060 Automotive Climate Ctrl System AUTS 2100 Toyota Hybrid General Maint. AUTS 2010 Automotive Engine Repair AUTS 1040 Automotive Engine Performance General Education Area IV * General Education Area II * General Ed Class * (any Gen Ed Area) 61 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Toyota T-TEN Program Diploma Program AS12 Automotive service technology offers you the opportunity to prepare for a career with a Toyota, Inc. The need for trained service and repair technicians, service writers, parts managers, and service managers continues to grow. Automotive service has become a career which demands comprehensive academic and technical training. You will learn service and repair procedures for some of the most popular and technically advanced automobiles. Training is oriented toward understanding and servicing Toyota automobiles. Prospective students must be accepted into the program. Upon completion of the program, the student will be awarded a diploma in automotive service technology. Students may become certified by taking the ASE (Automotive Service Excellence) certification tests administered in eight areas by ACT (American College Testing). This program is only offered fulltime, during the day. (Program Length: 4 Semesters) 106

9 AUTOMOTIVE SERVICE TECHNOLOGY PROGRAMS General automotive technician, basic automotive service technician, brake and front end specialist, transmission specialist, air conditioning and electrical specialist, engine specialist, computer systems specialist, engine performance specialist, service advisor, service writer, and parts attendant. (54 CREDIT HOURS) 1st Semester 16 Hours 2nd Semester 16 Hours AUTS 1010 Introduction to Toyota Auto AUTS 1020 Toyota Auto Elect Systems AUTS 1030 Toyota Brake Systems ENGL 1010 Fund of English I AUTS 1050 Toyota Suspension & Steering Systm AUTS 2020 Toyota Manual Drive Train & Axles AUTS 2030 Toyota Auto Transmissions/axles MATH 1012 Foundations of Mathematics 3rd Semester 9 Hours 4th Semester 13 Hours AUTS 1060 Toyota Auto Climate Ctrl Systs AUTS 2100 Toyota Hybrid Gen Maintenance EMPL 1000 Interpersonl Relatns & Prof Develop AUTS 2010 Toyota Auto Engine Repair AUTS 1040 Toyota Auto Engine Performance 54 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. 107

10 AUTOMOTIVE TECHNOLOGY PROGRAMS Automotive Technology Associate of Applied Science Degree AT23 The associate of applied science degree in automotive technology, consist of a sequence of courses designed to prepare students for high paying jobs careers in the automotive service and repair industry. Students will have the opportunity to develop academic, technical, and professional skills required for job acquisition, retention, and advancement. The demand for highly qualified automotive technicians continues to grow. This program emphasizes a combination of automotive electrical and mechanical theory, and the practical application necessary for successful employment. College level general education courses are included to provide the knowledge, and supplement skills, and understanding necessary for job acquisition, retention, or advancement. Students can choose to pursue careers an automotive service technician, service writer, service manager, manufacturer s representatives, or parts managers. Graduates from this program will receive an associate of applied science degree in automotive technology. Students are encouraged to invest in a basic set of automotive professional tools which may be provided and discounted from supporting tool vendors. Gwinnett Technical College General Automotive Training Program meets the Automobile Service Technology training certification program level for the National Automotive Technicians Education Foundation, Inc. /Automotive Service Excellence (ASE-NATEF). Students may become certified by independently taking the ASE (Automotive Service Excellence) certification tests administered in eight areas by ACT (American College Testing). This program is only offered full-time during the day. (Program Length: 4 Semesters) Employment opportunities include but are not limited to a general automotive technician, basic automotive service technician, brake and front end specialist, transmission specialist, air conditioning and electrical specialist, engine specialist, computer systems specialist, engine performance specialist, service advisor, service writer, and parts attendant (61 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 16 Hours AUTT 1010 Automotive Technology Intro AUTT 1030 Automotive Brake Systems AUTT 1020 Automotive Electrical Systems or AUTT 1021 and AUTT 1022 AUTT 1050 Auto Suspension & Steering System AUTT 1040 Automotive Engine Performance or AUTT 1041 and AUTT 1042 AUTT 1060 Automotive Climate Ctrl Systems 108

11 AUTOMOTIVE TECHNOLOGY PROGRAMS 3rd Semester 15 Hours 4th Semester 15 Hours AUTT 2020 Auto Manual Drive Train & Axles AUTT 2010 Automotive Engine Repair or AUTT 2011 and AUTT 2012 AUTT 2030 Automatic Trans. & Transaxles General Education Area II * General Education Area I - ENGL 1101 General Education Area IV * General Ed Class * (any Gen Ed Area) 61 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Auto Electrical Course Option: AUTT 1020 or AUTT 1021 and AUTT 1022 Auto Engine Performance Course Option: AUTT 1040 or AUTT 1041 and AUTT 1042 Auto Engine Repair Course Option: AUTT 2010 or AUTT 2011 and AUTT 2012 For the general educational courses noted with an (*), students can select from classes listed on page 80. All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Automotive Fundamentals Diploma Program AF12 The automotive fundamentals diploma program is a sequence of technical and academic courses designed to prepare students for careers in the automotive service and repair industry. Students are provided the opportunity to develop academic, technical and skilled knowledge required for job acquisition, retention, and advancement. The program emphasizes a combination of automotive electrical and mechanical theory, and practical applications necessary for successful employment. Program graduates receive an automotive fundamentals diploma. The automotive fundamentals diploma program is offered only during the evening schedule. Students are encouraged to invest in a set of basic automotive professional tools, provided at a special discount from supporting tool vendors. Students may become certified by independently taking the ASE (Automotive Service Excellence) certification tests administered in eight areas by ACT (American College Testing). (Program Length: 4 Semesters) Employment opportunities include but are not limited to a basic automotive service technician, brake and front end specialist, air conditioning and electrical specialist, engine specialist, computer systems specialist, engine performance specialist, and parts attendant. (37 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 9 Hours AUTT 1010 Automotive Technology Intro AUTT 1040 Automotive Engine Performance or AUTT 1041 and AUTT 1042 AUTT 1020 Automotive Electrical Systems or AUTT 1021 and AUTT 1022 EMPL 1000 Interpersonal Relations & Prof Dev ENGL 1010 Fundamentals of English I 109

12 AUTOMOTIVE TECHNOLOGY PROGRAMS 3rd Semester 5 Hours 4th Semester 12 Hours AUTT 1050 Auto Suspension & Steering System AUTT 1030 Automotive Brake Systems AUTT 1060 Automotive Climate Ctrl Systems MATH 1012 Foundations of Mathematics 40 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Auto Electrical Course Option: AUTT 1020 or AUTT 1021 and AUTT 1022 Auto Engine Performance Course Option: AUTT 1040 or AUTT 1041 and AUTT 1042 Nissan Dealership Technician Training Program (NDTTP) Students interested in specialized training for Nissan or Infiniti automobiles, may do so by enrolling in the general automotive program and declaring interest in doing so during their program interview. The general automotive program offers an embedded NDTTP program which allows students to declare a general automotive degree, diploma or certificate at the end of the program while benefiting from manufacturer specific training. Students will learn automotive system theory in our general automotive program courses by performing hands-on activities on Nissan and Infiniti vehicles, using manufacturer s specific tools, equipment and technical information. Students in the NDTTP program may benefit from specific manufacturer training from their Nissan or Infiniti dealership during their internship. Typical program length is approximately two years for a degree, or diploma. Students interested in this training option will need to also complete an interview with the NDTTP automotive advisor prior to or during their first or second semester of the program. 110 Automotive Chassis Technician Specialist ASG1 The automotive chassis technician specialist certificate program provides students with the opportunity to develop the skills necessary to enter the automotive industry as an entry level chassis technician. Topics covered include: shop safety, basic electrical/electronic theory and diagnosis, chassis components and types, steering system components and service, alignment theory and procedures, and brake system operation, diagnosis and repair. (Program Length: 2 Semesters) Students are encouraged to invest in a basic set of automotive professional tools that may be provided and discounted from supporting tool vendors. Students applying for this program must be accepted into the automotive technology degree or automotive fundamentals diploma program. Employment opportunities include but are not limited to a suspension and steering technician, brake system technician.

13 AUTOMOTIVE TECHNOLOGY PROGRAMS (17 CREDIT HOURS) 1st Semester 2 Hours 2nd Semester 15 Hours AUTT 1010 Automotive Technology Intro AUTT xxxx Elective(s) (7 hrs) AUTT 1030 Automotive Brake Systems or AUTT 1021 and AUTT 1022 AUTT 1050 Auto Suspension & Steering Systems 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): AUTT 1020 or AUTT 1021 and AUTT 1022 Automotive Climate Control Technician AH21 The automotive climate control technician certificate program provides students with an opportunity to develop the necessary skills for entering the automotive service industry as an entry level climate control technician. Topics covered include: basic shop safety, electrical/electronic theory and diagnosis, and the theory, operation, diagnosis and servicing of automotive climate control systems. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters) Students are encouraged to invest in a basic set of automotive professional tools that may be provided and discounted from supporting tool vendors. Students applying for this program must be accepted into the automotive technology degree or automotive fundamentals diploma program. Employment opportunities include but are not limited to an air conditioning and electrical technician specialist. (14 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 5 Hours AUTT 1010 Automotive Technology Intro AUTT 1020 Automotive Electrical Systems or AUTT 1021 and AUTT 1022 AUTT 1060 Automotive Climate Ctrl Systems 14 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): AUTT 1020 or AUTT 1021 and AUTT

14 AUTOMOTIVE TECHNOLOGY PROGRAMS Automotive Electrical/Electronic Systems Technician AE41 This certificate program provides students with the knowledge and skills necessary to diagnose, service, and repair basic electrical/electronic automotive systems as an entry level technician. Topics covered include automotive shop safety, electrical theory and circuit diagnosis, automotive batteries, starting and charging systems, instrumentation, lighting, and various vehicle accessories. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester) Students are encouraged to invest in a basic set of automotive professional tools that may be provided and discounted from supporting tool vendors. Students applying for this program must be accepted into the automotive technology degree or automotive fundamentals diploma program. Employment opportunities include but are not limited to Basic automotive service technician, electrical systems service technician. 1st Semester 9 Hours AUTT 1010 Automotive Technology Intro (9 CREDIT HOURS) AUTT 1020 Automotive Electrical Systems or AUTT 1021 and AUTT TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): AUTT 1020 or AUTT 1021 and AUTT 1022 Automotive Engine Performance Technician AE51 The automotive engine performance technician introduces students to the knowledge and skills required for entry-level engine performance technicians. Topics covered include theory, diagnosis, service, and repair of fuel systems, ignition systems, emission system, and electronic engine controls. This program is ideal students who enjoy working with the latest in automotive technology. (Program Length: 2 Semesters) Students are encouraged to invest in a basic set of automotive professional tools that may be provided and discounted from supporting tool vendors. 112

15 AUTOMOTIVE TECHNOLOGY PROGRAMS Students applying for this program must be accepted into the automotive technology degree or automotive fundamentals diploma program. Employment opportunities include but are not limited to a drivability technician, engine performance, and technician specialist. (16 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 7 Hours AUTT 1010 Automotive Technology Intro AUTT Auto Engine Performance or AUTT 1041 and AUTT 1042 AUTT 1020 Automotive Electrical or AUTT 1021 and AUTT TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Auto Electrical Course Option: AUTT 1020 or AUTT 1021 and AUTT 1022 Auto Engine Performance Course Option: AUTT 1040 or AUTT 1041 and AUTT 1042 Automotive Engine Repair Technician AE61 The automotive engine repair technician certificate program provides students with the opportunity to develop skills necessary as an entry level automotive engine repair technician. Topics include: basic shop safety, basic electrical/electronic diagnosis, principles of engine operation, basic engine diagnosis, and basic engine repair procedures. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters) Students are encouraged to invest in a basic set of automotive professional tools that may be provided and discounted from supporting tool vendors. Students applying for this program must be accepted into the automotive technology degree or automotive fundamentals diploma program. Employment opportunities include but are not limited to drivability technician, engine performance technician, and engine repair technician. 113

16 AUTOMOTIVE TECHNOLOGY PROGRAMS (15 CREDIT HOURS) 1st Semester 9 Hours 5th Semester 6 Hours AUTT 1010 Automotive Technology Intro AUTT 2010 Automotive Engine Repair AUTT 1020 Automotive Electrical 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION AUTT 2010 and AUTT 2030 are offered during the summer semester. Auto Electrical Course Option: AUTT 1020 or AUTT 1021 and AUTT 1022 Auto Engine Repair Course Option: AUTT 2010 or AUTT 2011 and AUTT 2012 Automotive Transmission/Transaxle Tech Specialist AA71 The automotive transmission/transaxle tech specialist certificate program provides students with the opportunity to develop skills as an entry level transmission, transaxle, and drive line service and repair technician. Topics covered include: shop safety, basic electrical/electronic theory and diagnosis, manual transmission/transaxle operation and diagnosis, automatic transmission/transaxle operation and diagnosis, axles operation and diagnosis, differentials operation and diagnosis, and 4WD/AWD systems operation and diagnosis. (Program Length: 2 Semesters) Students are encouraged to invest in a set of basic automotive professional tools, provided at a special discount from supporting tool vendors. Students applying for this program must be accepted into the automotive technology degree or automotive fundamentals diploma program. Employment opportunities include but are not limited to Transmission/Transaxle/Driveline technician. (18 CREDIT HOURS) 1st Semester 9 Hours 6th Semester 9 Hours AUTT 1010 Automotive Technology Intro AUTT 2020 Auto Manual Drive Train & Axles AUTT 1020 Automotive Electrical or AUTT 1021 and AUTT 1022 AUTT 2030 Automatic Trans &Transaxles 18 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION AUTT 2010 and AUTT 2030 are offered during the summer semester. Auto Electrical Course Option: AUTT 1020 or AUTT 1021 and AUTT

17 AUTOMOTIVE TECHNOLOGY PROGRAMS Heavy Diesel Service Technician HD31 The heavy diesel service technician certificate provides training in both the theory and diagnosis of basic systems found on diesel engines and heavy equipment. The program provides instruction in basic shop safety and equipment, diesel engines and fuel systems, electrical/electronic systems, hydraulics, and power train systems. The program is designed to last one year and will offer students an opportunity to apply their skills in an internship environment at a local diesel equipment repair facility. A mandatory internship is required to complete this program. This program is geared towards students who want to start a career in the heavy diesel equipment repair industry. (Program Length: 2 Semesters) Service technician in diesel equipment service facilities; heavy equipment service technician (33 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 16 Hours DIET 1000 Intro Diesel Tech Tools & Safety DIET 2001 Heavy Equipment Hydraulics DIET 1010 Diesel ELCT & Electronic System DIET 2011 Off Road Drivelines DIET 1030 Diesel Engines DIET 1050 Diesel Equipment Tech Intern 33 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Diesel Power Generation DP31 The diesel power generation certificate offers students who completed the Heavy Diesel Technician TCC two more advanced diesel courses that cover power generation units. Completion of this advanced certificate will prepare students to perform maintenance and overhaul procedures on power generation equipment. (Program Length: 2 Semester) Diesel Generator Repair Technician 115

18 AUTOMOTIVE TECHNOLOGY PROGRAMS (12 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 12 Hours DIET 1000 Intro Diesel Tech Tools & Safety DIET 1010 Diesel Electricl & Electronic Systems DIET 1030 Diesel Engines DIET 2002 GPG-Basic Power Generation Fund DIET 2012 DPG Controls, Swithing & Aux Syst 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The courses listed in the first semester are prerequisites to the courses in this certificate. 116

19 ACCOUNTING PROGRAMS Accounting Technology Associate of Applied Science Degree AC13 The world of accounting provides the opportunity to work with financial information at many different levels. Accountants prepare financial statements, track production costs and profit figures, calculate payroll and taxes, and monitor accounts payable and receivable. Accountants also have the ability to choose the type of industry they work in and the kind of accounting they do. The associate of applied science degree program prepares students to begin successful careers in the accounting profession. The associate degree program includes accounting and related business courses and college-level general education courses. The program features both manual and computerized accounting systems. Students receive comprehensive training in preparation for a variety of employment situations. (Program Length: 5 Semesters) Accounting assistant, accounting clerk, audit clerk, bookkeeper, staff accountant, junior accountant (63 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 18 Hours General Education Area I ENGL 1101 General Education Area III MATH 1111 or MATH 1100 or MATH 1101 BUSN 1440 Document Production General Education Class Area II * ACCT 1100 Financial Accounting I ACCT 1125 Individual Tax Accounting ACCT 1120 Spreadsheet Applications ACCT 1105 Financial II ACCT 2120 Business Tax Accounting 3rd Semester 15 Hours 4th Semester 15 Hours General Education Area IV * General Education Class (Any Gen Ed Area) * ACCT 1115 Computerized Accounting ACCT 1130 Payroll Accounting ACCT 1110 Managerial Accounting Elective ACCT 2110 Accounting Simulation ACCT 2130 Integrated Acct Management System ACCT 2155 Principles of Fraud Examination or Elective Elective 63 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): Any college course for which the student has the prerequisites may be used to satisfy this requirement. Program Director suggested electives include: Any ACCT, MKTG 1130, MGMT 1100, BUSN 1420, CIST 1001, MGMT

20 ACCOUNTING PROGRAMS For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Note: Some courses may have additional prerequisites not listed in the curriculum. Please refer to individual course descriptions for further information. Accounting Diploma Program AC12 The accounting diploma program prepares students to begin successful careers in the accounting profession. The program includes accounting and related business courses and diploma-level general education courses. It features both manual and computerized accounting systems. Students receive comprehensive training in preparation for a variety of employment situations. (Program Length: 4 Semesters) Accounting assistant, accounting clerk, audit clerk, bookkeeper (41 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 15 Hours ACCT 1100 Financial Accounting I ACCT 1125 Individual Tax Accounting ENGL 1010 Fundamentals of English I ACCT 1105 Financial Accounting II BUSN 1440 Document Production ACCT 1120 Spreadsheet Applications ACCT 1115 Computerized Accounting 3rd Semester 12 Hours 4th Semester 3 Hours ACCT 1110 Managerial Accounting MATH 1012 Foundations of Mathematics EMPL 1000 Interpersonal Relations & Prof Dev ACCT 1120 Spreadsheet Applications ACCT 1130 Payroll Accounting 41 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites not listed in the curriculum. Please refer to individual course descriptions for further information. 118

21 ACCOUNTING PROGRAMS Computerized Accounting Specialist CAY1 The computerized accounting specialist certificate provides students with basic skills in computerized accounting. Topics include: principles of accounting, computerized accounting, spreadsheet fundamentals and basic computers. (Program Length: 2 Semesters) Accounting clerk, bookkeeper (20 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 11 Hours ACCT 1100 Financial Accounting I Occupational Elective ACCT 1120 Spreadsheet Applications ACCT 1105 Financial Accounting II ACCT 1115 Computerized Accounting 20 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any ACCT, BUSN 1420, BUSN 1430, CIST 1001, MGMT 1125, MKTG 1130, MGMT 1100 Office Accounting Specialist OA31 The office accounting specialist certificate provides entry-level office accounting skills. Topics include: principles of accounting, computerized accounting and basic computer skills. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters) Accounting clerk, bookkeeper (13 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 7 Hours ACCT 1100 Financial Accounting I ACCT 1115 Computerized Accounting ACCT 1105 Financial Accounting II 13 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 119

22 ACCOUNTING PROGRAMS Payroll Accounting Specialist PA61 The Payroll Accounting Specialist technical certificate provides entry-level skills into payroll accounting. Topics include: principles of accounting, computerized accounting, principles of payroll accounting, mathematics and basic computer use. (Program Length: 2 Semesters) Accounting clerk, bookkeeper (16 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 10 Hours ACCT 1100 Financial Accounting I ACCT 1105 Financial Accounting II ACCT 1115 Computerized Accounting ACCT 1130 Payroll Accounting 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Tax Preparation Specialist TPS1 The Tax Preparation Specialist technical certificate is designed to provide entry-level skills for tax preparers. Topics include principles of accounting, tax accounting, business calculators, mathematics, and basic computer skills. (Program Length: 2 Semesters) Accounting clerk, bookkeeper (19 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 9 Hours ACCT 1100 Financial Accounting I ACCT 2120 Business Tax Accounting ACCT xxxx Elective ACCT 1125 Individual Tax Accounting ACCT 1130 Payroll Accounting Elective(s): any ACCT. 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 120

23 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS Business Administrative Technology Associate of Applied Science Degree BA23 The business administrative technology program is designed to prepare graduates for employment in a variety of positions in today s technology-driven workplaces. The business administrative technology program provides learning opportunities, which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The program emphasizes the use of word processing, spreadsheet, presentation, and database applications software. Students are also introduced to accounting fundamentals, electronic communications, internet research, and electronic file management. The program includes instruction in effective communication skills and technology innovations for the office. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of administrative technology. Graduates of the program receive a business administrative technology, associate of applied science degree and will have completed the general office assistant certificate and the Microsoft office applications professional certificate. (Program Length: 5 Semesters) Students who do not type at least 25 words per minute will be advised to take BUS 1100 their first semester. Administrative assistant, virtual administrative assistant, office administrator, executive assistant (63 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 12 Hours General Education Area III - MATH 1111, MATH 1100 or MATH 1101 General Education Area I - ENGL 1101 General Education Area II* BUSN 1400 Word Processing BUSN 1430 Desktop Publ &Presentation Appl BUSN 1440 Document Production 3rd Semester 14 Hours 4th Semester 14 Hours BUSN 1410 Spreadsheet Concepts & Applicatns BUSN 1240 Office Procedures BUSN 1190 Digital Technologies in Business BUSN 2160 Electronic Mail Applications BUSN 2210 Applied Office Procedures BUSN 2200 Office Accounting or ACCT 1100 Financial Accounting I BUSN 1420 Database Applications BUSN 2190 Busn Doc Proofreading & Editing BUSN xxxx Elective (3 credit hours) 121

24 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS 5th Semester MGMT 1100 Principles of Management General Education Area IV * BUSN xxxx Elective (3 credit hours) 12 Hours General Education Class (3 credit hour any Gen Ed Area) * 63 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN course not required for program completion. Recommended electives: BUSN 1100, BUSN 1250, BUSN 1300, BUSN 1420, BUSN 2170, BUSN 1180 and/or BUSN For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Business Administrative Technology Diploma Program BA22 The business administrative technology diploma prepares students for employment in a variety of positions in today s technology-driven work places. The program includes courses in office technology and diploma-level general education courses. Students receive comprehensive training in preparation for a variety of employment situations. Graduates of the business administrative assistant concentration will have completed the diploma, general office assistant certificate and the Microsoft office applications professional certificate. Graduates of the medical administrative assistant concentration will have completed the diploma, the medical office assistant certificate and the medical billing clerk certificate. (Program Length: 4 Semesters) Students who do not type at least 25 words per minute will be advised to take BUSN 1100 their first semester. Graduates will find opportunities in business or medical offices as an administrative assistant, virtual administrative assistant, office administrator, executive assistant, medical billing assistant, medical insurance coder, receptionist and/or front office assistant depending on their concentration 122

25 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS BUSINESS ADMINISTRATIVE ASSISTANT CONCENTRATION 8BA2 (50 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 12 Hours MATH 1012 Foundations of Mathematics ENGL 1010 Fundamentals of English I EMPL 1000 or PSYC 1010 BUSN 1400 Word Processing BUSN 1430 Desktop Publ & Presentation Appl BUSN 1440 Document Production 3rd Semester 14 Hours 4th Semester 13 Hours BUSN 1410 Spreadsheet Concepts and Appli BUSN 1240 Office Procedures BUSN 1190 Digital Technologies in BUS BUSN 2210 Applied Office Procedures BUSN 2200 Office Accounting or ACCT 1100 Financial Accounting I BUSN 2160 Electronic Mail Applications BUSN xxxx Electives (6 credit hours) BUSN 2190 Busn Doc Proofreading & Editing 50 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN course not required for program completion. Recommended electives: BUSN 1100, BUSN 1250, BUSN 1300, BUSN 1420, BUSN 2170, BUSN 1180 and/or BUSN MEDICAL ADMINISTRATIVE ASSISTANT CONCENTRATION 8M12 (52 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours ALHS 1090 MedTerm/Allied Health Sciences or BUSN 2300 Medical Terminology ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics EMPL 1000 or PSYC 1010 BUSN 1400 Word Processing BUSN 1440 Document Production ALHS 1011 Structure & Function of the Human Body or ALHS 1010 or BUSN rd Semester 12 Hours 4th Semester 14 Hours MAST 1120 Human Path Condition BUSN 2370 Med Office Billing/Coding/Ins BUSN 2190 BusnDoc Proofreading&Editing BUSN 2340 Medical Administrative Proced BUSN 2200 Office Accounting or ACCT 1100 Financial Accounting I BUSN xxxx Elective (3 credit hours) BUSN xxxx Elective (6 credit hours) 52 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 123

26 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN course not required for program completion. Recommended electives: BUSN 1100, BUSN 1190, BUSN 1250, BUSN 1240, BUSN 1300, BUSN 1410, BUSN 1420, BUSN 1430, BUSN 2160, BUSN 2170, and/or BUSN Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Administrative Support Assistant AS21 This certificate program prepares students for entry-level positions in office administration. Courses will cover word processing, keyboarding, and office procedures. Students wanting to work in medical or health offices are advised to take ALHS 1090 for their elective. All other students are advised to take any BUSN course for their elective. Courses in this certificate apply to the business administrative technology degree and/or diploma programs. (Program Length: 2 Semesters) Students who do not type at least 25 words per minute will be advised to take BUSN 1100 their first semester. Office assistant, receptionist, virtual administrative assistant, typist (19 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 11 Hours BUSN xxxx Electives (6 credit hours) BUSN 1240 Office Procedures BUSN 1440 Document Production BUSN 1400 Word Processing 19 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN course not in this certificate program, ALHS Recommended electives: BUSN 1100, BUSN 2200, BUSN 1190, BUSN 1250, BUSN 1300, BUSN 1410, BUSN 1420, BUSN 1430, BUSN 2160, BUSN 2170, and/or BUSN Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 124

27 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS Medical Billing Clerk MB21 The medical billing clerk certificate provides instruction in medical insurance and medical billing for reimbursement purposes. Courses in this certificate apply to the business administrative technology degree and/or diploma programs. (Program Length: 2 Semesters Minimum) Students who do not type at least 25 words per minute will be advised to take BUSN 1100 their first semester. Medical office assistant, receptionist, virtual administrative assistant, medical billing assistant, medical insurance coder (21 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 12 Hours ALHS 1090 MedTerm/Allied Health Sciences or BUSN 2300 ALHS 1011 Structure & Function of the Human Body or ALHS 1010 or BUSN 2310 BUSN 2370 Med Office Billing/Coding/Ins BUSN 1440 Document Production BUSN xxxx Electives (5 credit hours) 21 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN course not required in this certificate. Recommended electives: BUSN 1100, BUSN 1250, BUSN 1240, BUSN 1300, BUSN 1410, BUSN 1420, BUSN 1430, BUSN 2160, BUSN 2190 and/or BUSN Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 125

28 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS Medical Front Office Assistant MF21 The medical front office assistant certificate is designed to provide the educational opportunities to individuals that will enable them to obtain the knowledge and skills necessary to secure an entry level position as a receptionist in a physician s office, hospital, clinic, or other related areas. Technical courses apply to the degree or diploma program in office technology. Courses in this certificate apply to the business administrative technology degree and/or diploma programs. (Program Length: 3 Semesters Minimum) Students who do not type at least 25 words per minute will be advised to take BUSN1100 their first semester. Medical office assistant, medical front office assistant, medical receptionist, virtual administrative assistant, typist (26 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 10 Hours ALHS 1090 MedTerm/Allied Health Sciences or BUSN 2300 ENGL 1010 Fundamentals of English I ALHS 1011 Structure & Function of the Human Body 3rd Semester 4 Hours BUSN 2340 Medical Administrative Procedures BUSN 1440 Document Production BUSN xxxx Electives (6 credit hours) 26 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN course not required in this certificate program. Recommended electives: BUSN 1100, BUSN 1250, BUSN 1240, BUSN 1300, BUSN 1410, BUSN 1420, BUSN 1430, BUSN 2160, BUSN 2190 and/or BUSN Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 126

29 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS Microsoft Office Application Professional MF41 The Microsoft office application professional certificate provides students with the knowledge and skills in word processing, spreadsheet, database, and presentation applications. The hands-on instruction covers skills that are beneficial in any situation where computers are used. This certificate can extend and update current skills or provide skills to start a variety of careers. Technical courses apply to the degree or diploma program in business administrative technology. (Program Length: 3 Semesters Minimum) Microsoft Office Specialist, software applications, applications help desk assistant, virtual assistant (21 CREDIT HOURS) 1st Semester 5 Hours 2nd Semester 16 Hours BUSN xxxx Elective (3 credit hours) BUSN 1400 Word Processing BUSN 1410 Spreadsheet Concepts and Appli BUSN 1420 Database Applications BUSN 1430 Desktop Publ &Presentation Appli 21 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): any BUSN not required in this certificate program completion. Recommended electives: BUSN 1100, BUSN 2200, BUSN 1190, BUSN 1240, BUSN 1250, BUSN 1300, BUSN 1420, BUSN 1440, BUSN 2160, BUSN 2170, and/or BUSN 2180 Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 127

30 BUSINESS ADMINISTRATIVE TECHNOLOGY PROGRAMS Technical Specialist TC31 This certificate will include an introduction to the kinds of writing and speaking skills people need in any technically oriented job. No matter what sort of professional work is involved, it is likely to have a large amount of communication that is technical in nature. This program of study can be valuable for any projects worked on, for any organizations worked in, and for any career field. This is a degree level certificate. (Program Length: 3 Semesters Minimum) Students in this program are advised by the advisement center, building 100, room 811. (35 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 12 Hours ENGL 1101 Composition and Rhetoric General Education Area IV* General Education Area II * General Education Area II * General Education Area III * 3rd Semester General Education Area IV * 12 Hours General Education Class * (Any Gen Ed Area) Occupational Elective Occupational Elective General Education Class *(Any Gen Ed Area) Occupational Elective 35 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Occupational Electives: Students must complete one of the following 3 course sequences: Accounting Course Option: ACCT 1100, ACCT 1105, and ACCT 1115 Early Childhood Course Option: ECCE 1101, ECCE 1103, and ECCE 1105 Hotel, Restaurant, and Tourism Option: HRTM 1150, HRTM 1201, and HRTM 1210 Marketing Option: MKTG 1100, MKTG 1160, and MKTG The general educational courses noted with an (*) can be selected from 23 courses listed on pages Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 128

31 BUSINESS MANAGEMENT PROGRAMS Business Management: General Management, Human Resource Management, Logistics Management, and Operations Management Associate of Applied Science Degree MD13 The business management degree prepares students currently in management and students anticipating career changes into management for advanced positions in a variety of business and industries. The business management program includes management and accounting courses and college-level general education courses. Graduates of the program receive a degree in business management with a concentration in general management, human resource management, or operations management. (Program Length: 4 Semesters Minimum) Management positions in business and industry GENERAL MANAGEMENT CONCENTRATION 81G3 (63 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours MGMT 1100 Principles of Management MGMT 2125 Performance Management MGMT 2130 Employee Training &Development MGMT 1115 Leadership MGMT 1110 Employment Law MGMT 2115 Human Resource Management MGMT 1105 Organizational Behavior MGMT 1120 Introduction to Business General Education Area I - ENGL rd Semester 18 Hours 4th Semester 16 Hours MGMT 2120 Labor Management Relations MGMT 2200 Production/Operations Manage MGMT 2215 Team Project General Ed Area III - MATH 1111, MATH 1100 or MATH 1101 MGMT 1125 Business Ethics PSYC 1101 Introductory Psychology * MGMT 2155 Quality Management Principles HUMN 1101 Introduction to Humanities * ENGL 1102 Literature and Composition * ECON 2105 Principles of Economics ACCT 1100 Financial Accounting I THE CONCENTRATION ELECTIVE WOULD ALLOW YOU TO GET BOTH IMBEDDED CERTIFICATES IF IT IS FILLED BY MGMT2130. Please note this schedule is with student s first semester in the Fall and no summer semester. 129

32 BUSINESS MANAGEMENT PROGRAMS HUMAN RESOURCE MANAGEMENT CONCENTRATION 82H3 (63 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours MGMT 1100 Principles of Management MGMT 1110 Employment Law MGMT 2125 Performance Management MGMT 2115 Human Resource Management MGMT 2130 Employee Training &Development MGMT 1105 Organizational Behavior MGMT 1115 Leadership MGMT 1120 Introduction to Business General Ed Areal I - ENGL rd Semester 18 Hours 4th Semester 16 Hours MGMT 2120 Labor Management Relations MGMT 2215 Team Project General Ed Area III - MATH 1111, MATH 1100 or MATH 1101 MGMT 2210 Project Management MGMT 1125 Business Ethics PSYC 1101 Introductory Psychology * MGMT 2155 Quality Management Principles HUMN 1101 Introduction to Humanities * ENGL 1102 Literature and Composition * ACCT 1100 Financial Accounting I ECON 2105 Principles of Economics Please note this schedule is with student s first semester in the Fall and no summer semester. LOGISTICS CONCENTRATION 86L3 (63 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours MGMT 1100 Principles of Management LOGI 1000 Business Logistics LOGI 1010 Purchasing MGMT 1115 Leadership MGMT 1110 Employment Law MGMT 2115 Human Resource Management MGMT 1105 Organizational Behavior MGMT 1120 Introduction to Business General Ed Areal I - ENGL rd Semester 18 Hours 4th Semester 16 Hours General Ed Area III MATH 1111 or MATH 1100 or MATH 1101 MGMT 1125 Business Ethics LOGI 1120 Materials Management LOGI 1030 Product Life Cycle Management ENGL 1102 Literature and Composition * ECON 2105 Principles of Economics MGMT 2215 Team Project MGMT 2210 Project Management PSYC 1101 Introductory Psychology HUMN 1101 Introduction to Humanities ACCT 1100 Financial Accounting I Please note this schedule is with student s first semester in the Fall and no summer semester. 130

33 BUSINESS MANAGEMENT PROGRAMS OPERATIONS MANAGEMENT CONCENTRATION 83P3 (63 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours MGMT 1100 Principles of Management MGMT 2125 Performance Management MGMT 2130 Employee Training &Development MGMT 1115 Leadership MGMT 1110 Employment Law MGMT 2115 Human Resource Management MGMT 1105 Organizational Behavior MGMT 1120 Introduction to Business General Ed Areal I - ENGL rd Semester 18 Hours 4th Semester 16 Hours General Ed Area III MATH 1111 or MATH 1100 or MATH 1101 MGMT 2200 Production/Operations Mgmnt MGMT 1125 Business Ethics MGMT 2155 Quality Management Principles ENGL 1102 Literature and Composition * ECON 2105 Principles of Economics MGMT 2215 Team Project MGMT 2210 Project Management PSYC 1101 Introductory Psychology HUMN 1101 Introduction to Humanities ACCT 1100 Financial Accounting I Please note this schedule is with student s first semester in the Fall and no summer semester. 63 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any MGMT, MKTG courses and/or ACCT 1105, ACCT 1115, ACCT 1130, CIST 1001, or BUSN 1240 For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 131

34 BUSINESS MANAGEMENT PROGRAMS Business Management Diploma Program MD12 The business management diploma prepares students currently in management and students anticipating career changes into management for advanced positions in a variety of business and industries. The program includes management and accounting courses and diploma-level general education courses. (Program Length: 3 Semesters Minimum) Management positions in business and industry (46 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 18 Hours MGMT 1100 Principles of Management MGMT 1125 Business Ethics MGMT 2125 Performance Management MGMT 2130 Employee Training &Development MGMT 2155 Quality Management Principles 3rd Semester ACCT 1100 Financial Accounting I ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics 13 Hours EMPL 1000 Interpersonal Relat & Prof Dev or PSYC 1010 Basic Psychology MGMT 1110 Employment Law MGMT 1105 Organizational Behavior MGMT 1115 Leadership MGMT 1120 Introduction to Business MGMT 2115 Human Resource Management MGMT 2215 Team Project 46 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Please note this schedule is with student s first semester in the Fall and no summer semester. Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 132

35 BUSINESS MANAGEMENT PROGRAMS Human Resource Management Specialist HRM1 The human resource management specialist certificate program provides courses which deal with the philosophy, policies, procedures, and practices relating to the management of people within an organization, including personnel planning, work design, staffing, training, performance appraisal, compensation, and employee protection. Technical courses apply to the degree or diploma program in business management and the degree program in management and supervisory development technical specialist. (Program Length: 2 Semesters Minimum) Human resource management specialist in business and industry (18 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 9 Hours MGMT 2125 Performance Management MGMT 2130 Employee Training &Development MGMT 1105 Organizational Behavior MGMT 2115 Human Resource Management MGMT 1100 Principles of Management MGMT 1110 Employment Law or MGMT TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Elective(s): MGMT 1100, MGMT 1110, MGMT 1125, MGMT Logistics Management Specialist LM21 The Logistics TCC program is a sequence of courses that are designed to prepare students for employment in the field of business logistics. The program focuses on specific occupational courses in the area of logistics which are designed to provide an overview of the process from product idea conception to the delivery of the product to the consumer. (Program Length: 2 Semesters Minimum) Employment from this program will be initially entry level logistics positions such as dispatcher, warehouse clerk or logistics technician. Once the graduate gains experience, expected positions could include logistics analyst. 133

36 BUSINESS MANAGEMENT PROGRAMS (17 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 8 Hours LOGI 1000 Business Logistics LOGI 1010 Purchasing MGMT 1100 Principles of Management or MGMT 2200 Production/Operations Mgmt LOGI 1120 Materials Management LOGI 1030 Product Life Cycle Mgmt 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Please note this schedule is with student s first semester in the Fall and no summer semester. Management and Leadership Specialist MAL1 The management specialist certificate provides courses which prepare students for leadership positions. Technical courses apply to the degree or diploma program in business management and the degree program in management and supervisory development technical specialist. (Program Length: 2 Semesters Minimum) Management positions in business and industry (17 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 8 Hours MGMT 2125 Performance Management MGMT 2130 Employee Training &Development MGMT 1100 Principles of Management MGMT 1115 Leadership MGMT 1110 Employment Law or MGMT TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 134

37 MARKETING PROGRAMS Marketing Management, Entrepreneurship, e-business, Retail Management, Professional Selling, Sports Marketing, and Social Media Associate of Applied Science Degree MM13 The marketing management degree prepares students for careers in the business and marketing fields, which would include marketing and sales, retail and wholesale management, entrepreneurship, small business management, and sports marketing. The associate of applied science degree includes marketing, management, accounting, computer, and college-level general education courses. Graduates of the program receive a degree in marketing management with a concentration in one of the following areas: marketing, entrepreneurship, e-business, retail management, professional selling and sports marketing. (Program Length: 4 Semesters Minimum) Business management, marketing management, store manager, buyer, merchandise manager, department manager, sales representative, customer service manager, visual merchandising manager, insurance sales, entrepreneur, sports management and marketing, and real estate sales MARKETING MANAGEMENT CONCENTRATION 8MM3 (64 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 18 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 1210 Services Marketing or MKTG 2070 Buying and Merchandising MKTG 1370 Consumer Behavior MKTG 2180 Principles of Sports Marketing MKTG 2300 Marketing Management MKTG 2060 Marketing Channels MKTG 2090 Marketing Research ACCT 1100 Financial Accounting I General Education Class (Any Gen Ed Area) * MKTG 2030 Digital Publishing and Design General Education Area IV * 135

38 MARKETING PROGRAMS ENTREPRENEURSHIP CONCENTRATION 8EN3 (64 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 18 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 2030 Digital Publishing and Design MKTG 2210 Entrepreneurship MKTG 1210 Services Marketing or MKTG 2070 Buying and Merchandising MKTG 2300 Marketing Management MKTG 2090 Marketing Research MKTG 2010 Small Business Management ACCT 1100 Financial Accounting I General Education Class (Any Gen Ed Area) * General Education Area IV * E-BUSINESS CONCENTRATION 8EB3 (64 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 18 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 2030 Digital Publishing and Design MKTG 2210 Entrepreneurship MKTG 2300 Marketing Management MKTG 2090 Marketing Research MKTG 1210 Services Marketing or MKTG 2070 Buying and Merchandising BUSN 2170 Web Page Design ACCT 1100 Financial Accounting I General Education Class (Any Gen Ed Area) * 136 General Education Area IV *

39 MARKETING PROGRAMS RETAIL MANAGEMENT CONCENTRATION 8RM3 (64 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 18 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 1370 Consumer Behavior MKTG 2070 Buying and Merchandising MKTG 1270 Visual Marketing MKTG 2300 Marketing Management MKTG 2270 Retail Operations Management MKTG 2090 Marketing Research ACCT 1100 Financial Accounting I General Education Class (Any Gen Ed Area) * MKTG 2030 Digital Publishing and Design General Education Area IV * PROFESSIONAL SELLING CONCENTRATION 8P23 (64 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 2180 Principles of Sports Marketing MKTG 1370 Consumer Behavior MKTG 2300 Marketing Management MKTG 2060 Marketing Channels MKTG 2090 Marketing Research MKTG 1210 Services Marketing General Education Class (Any Gen Ed Area) * ACCT 1100 Financial Accounting I General Education Area IV * MKTG 2030 Digital Publishing and Design 137

40 MARKETING PROGRAMS SPORTS MARKETING CONCENTRATION 8SM3 (64 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 18 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 2090 Marketing Research MKTG 1280 Intro to Sport and Rec Management MKTG 2180 Principles of Sports Marketing MKTG 2300 Marketing Management MKTG 2080 Regulation and Compliance in Sports MKTG 2280 Sports Management ACCT 1100 Financial Accounting I General Education Class (Any Gen Ed Area) * MKTG 2030 Digital Publishing and Design General Education Area IV * SOCIAL MEDIA CONCENTRATION 8S23 (64 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 18 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business General Education Area III MATH 1111 or MATH 1100, or MATH 1101 General Education Area I ENGL 1101 General Education Area II * MKTG 2160 Advanced Selling 3rd Semester 16 Hours 4th Semester 15 Hours MKTG 2090 Marketing Research MKTG 2300 Marketing Management MKTG 2500 Exploring Social Media MKTG 2550 Analyzing Social Media MKTG 2180 Principles of Sports Marketing MKTG 1370 Consumer Behavior ACCT 1100 Financial Accounting I General Education Class (Any Gen Ed Area) * MKTG 2030 Digital Publishing and Design General Education Area IV * 64 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 138

41 MARKETING PROGRAMS For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Marketing Management, Entrepreneurship, e-business, Retail Management, Professional Selling, Sports Marketing, and Social Media Diploma Program MM12 The marketing management diploma includes courses in marketing, management, accounting, computers, and diploma-level general education courses. Graduates of the program receive a diploma in marketing management, with a concentration in marketing management, entrepreneurship, e-business, retail management, professional selling or sports marketing. (Program Length: 4 Semesters Minimum) Marketing administration assistant, sports management and marketing, entrepreneur, department manager, or sales associate MARKETING MANAGEMENT CONCENTRATION (54 CREDIT HOURS) 8MM2 1st Semester 13 Hours 2nd Semester 16 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling EMPL 1000 Interpersonal Relations & Prof Dev BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I MKTG 2030 Digital Publishing and Design 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 1210 Services Marketing or MKTG 2070 Buying and Merchandising MKTG 1370 Consumer Behavior MKTG 2180 Principles of Sports Marketing MATH 1012 Foundations of Mathematics MKTG 2300 Marketing Management MKTG 2090 Marketing Research MKTG 2060 Marketing Channels ACCT 1100 Financial Accounting I 139

42 MARKETING PROGRAMS ENTREPRENEURSHIP CONCENTRATION (54 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications 8EN2 MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling EMPL 1000 Interpersonal Relations & Prof Dev BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I MKTG 2030 Digital Publishing & Design 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 2210 Entrepreneurship MKTG 1210 Services Marketing or MKTG 2070 Buying and Merchandising MATH 1012 Foundations of Mathematics MKTG 2300 Marketing Management MKTG 2090 Marketing Research MKTG 2010 Small Business Management ACCT 1100 Financial Accounting I E-BUSINESS CONCENTRATION (54 CREDIT HOURS) 8EB2 1st Semester 13 Hours 2nd Semester 14 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling EMPL 1000 Interpersonal Relations & Prof Dev BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I MKTG 2030 Digital Publishing and Design 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 2210 Entrepreneurship MKTG 1210 Services Marketing or MKTG 2070 Buying and Merchandising MATH 1012 Foundations of Mathematics MKTG 2300 Marketing Management MKTG 2090 Marketing Research BUSN 2170 Web Page Design ACCT 1100 Financial Accounting I RETAIL MANAGMENT CONCENTRATION (54 CREDIT HOURS) 8RM2 1st Semester 13 Hours 2nd Semester 14 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications 140

43 MARKETING PROGRAMS MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I EMPL 1000 Interpersonal Relations & Prof Dev MKTG 2030 Digital Publishing and Design 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 1370 Consumer Behavior MKTG 2300 Marketing Management MKTG 2070 Buying and Merchandising MKTG 2270 Retail Operations Management MKTG 1270 Visual Marketing MKTG 2090 Marketing Research MATH 1012 Foundations of Mathematics ACCT 1100 Financial Accounting I PROFESSIONAL SELLING CONCENTRATION (54 CREDIT HOURS) 8P12 1st Semester 13 Hours 2nd Semester 14 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I EMPL 1000 Interpersonal Relations & Prof Dev MKTG 2030 Digital Publishing and Design 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 2180 Introduction to Sports Marketing MKTG 2300 Marketing Management MKTG 1370 Consumer Behavior MKTG 2090 Marketing Research MKTG 1210 Services Marketing MKTG 2060 Marketing Channels MATH 1012 Foundations of Mathematics ACCT 1100 Financial Accounting I SPORTS MARKETING CONCENTRATION (54 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 14 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications 8SM2 MKTG 1130 Business Regs and Compliance MKTG 1160 Professional Selling EMPL 1000 Interpersonal Relations & Prof Dev MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I MKTG 2030 Digital Publishing and Design 141

44 MARKETING PROGRAMS 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 2090 Marketing Research MKTG 1280 Intro to Sport and Rec Mgmt MKTG 2180 Principles of Sports Marketing MATH 1012 Foundations of Mathematics MKTG 2300 Marketing Management MKTG 2080 Regulation and Compliance in Sports MKTG 2280 Sports Management ACCT 1100 Financial Accounting I SOCIAL MEDIA CONCENTRATION (54 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 14 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communications 8S12 MKTG 1130 Business Regs and Compliance MKTG 2000 Global Marketing or MKTG 2290 Marketing Internship/Practicum MKTG 1160 Professional Selling BUSN 1300 Introduction to Business ENGL 1010 Fundamentals of English I EMPL 1000 Interpersonal Relations & Prof Dev MKTG 2030 Digital Publishing and Design (3) 3rd Semester 12 Hours 4th Semester 13 Hours MKTG 2090 Marketing Research MKTG 2300 Marketing Management MKTG 2500 Exploring Social Media MKTG 2550 Analyzing Social Media MKTG 2180 Principles of Sports Marketing MKTG 1370 Consumer Behavior MATH 1012 Foundations of Mathematics ACCT 1100 Financial Accounting I 53 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION E-Commerce Marketer EA71 The e-commerce marketer certificate prepares individuals to plan, manage and market electronic business operations, products and services provided online via the Internet. Students will learn the fundamental elements of e-commerce business operations in order to create their own website or work with ISP. They will be prepared for retail and wholesale businesses. Technical courses apply to the degree or diploma program in marketing management. (Program Length: 2 Semesters Minimum) E-commerce entrepreneur, e-commerce business assistant manager, customer service assistant (15 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 8 Hours MKTG 2210 Entrepreneurship 142

45 MARKETING PROGRAMS MKTG 1100 Principles of Marketing MKTG 2030 Digital Publishing & Design BUSN 2170 Web Page Design 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Entrepreneurship EN11 The entrepreneurship certificate will provide the opportunity for students to assess their entrepreneurial traits and obtain the skills needed to write a comprehensive business plan. Students will have an opportunity to obtain knowledge in financing, federal and state laws, and the steps in organizing a successful business. Technical courses apply to the degree or diploma program in marketing management. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Small business owner (15 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 9 Hours MKTG 1100 Principles of Marketing MKTG 1130 Business Regs and Compliance MKTG 2010 Small Business Management MKTG 2210 Entrepreneurship 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Marketing Specialist MS21 The marketing specialist certificate provides students with the opportunity to learn or improve selling skills. Students learn selling and promotional techniques in both the consumer and business markets. The certificate prepares graduates to be competitive in the sales field. Technical courses apply to the degree or diploma program in marketing management. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Sales representative, retail sales, marketing assistant (9 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 3 Hours MKTG 1100 Principles of Marketing MKTG 1160 Professional Selling MKTG 1190 Integrated Marktng Communictns 9 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 143

46 MARKETING PROGRAMS Sales Representative SR11 The sales representative certificate is designed to prepare students for employment as a representative NO for manufacturers, LONGER wholesalers, retailers, and service occupations. As such, they will learn how to make customers interested in their merchandise and to arrange the sale of that merchandise. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Small business manager, buyer, merchandise manager, department manager, sales representative, customer service manager, OFFERED and display manager (17 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 9 Hours MKTG 1190 Integrated Marktng Communictns MKTG 1100 Principles of Marketing MKTG 1160 Professional Selling MKTG 2060 Marketing Channels MKTG 2160 Advanced Selling 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Small Business Marketing Manager SB51 The small business marketing manager certificate provides courses in the operation and management of small businesses, including marketing theory and the basics of planning for and operating a small business. Technical courses apply to the degree or diploma program in marketing management. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Small business manager, buyer, merchandise manager, department manager, sales representative, customer service manager, and display manager 144

47 MARKETING PROGRAMS (15 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 6 Hours MKTG 1100 Principles of Marketing MKTG 1190 Integrated Marktng Communictns MKTG 1130 Business Regs and Compliance MKTG 2010 Small Business Management MKTG 1160 Professional Selling 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Sports Management RM21 The sports management certificate prepares students for entry level opportunities in the field sports marketing, management and sales. This certificate also provides additional skill sets in the field of law, marketing, management and sales. The certificate is an opportunity to enrich prior education through providing an additional education in the sports management field. Technical courses apply to the marketing management degree or diploma sports marketing concentration. (Program Length: 2 Semesters Minimum) Employment opportunities include professional selling, game and event Operations management, retail sales, event security, concessions sales and management, as well as corporate management in sports and entertainment. (17 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 6 Hours MKTG 1280 Intro Sports & Recreation Manage MKTG 1160 Professional Selling MKTG 2280 Sports Management MKTG 2180 Principles of Sports Marketing MKTG 2080 Regulation & Compliance in Sport 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 145

48 EARLY CHILDHOOD CARE AND EDUCATION PROGRAMS Early Childhood Care and Education Associate of Applied Science Degree EC13 The early childhood care and education degree is a sequence of courses designed to prepare students for careers in early childhood care and education and related fields. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of early childhood care and education theory and practical application necessary for successful employment. Program graduates receive an early childhood care and education associate of applied science degree with one of the following concentrations: 1) early childhood care and education paraprofessional 2) early childhood program management 3) exceptionalities. (Program Length: 6 Semesters Minimum) Early childhood care and education paraprofessional in an elementary school or special education classroom, early childhood program management director or assistant director, lead teacher in an early childhood program (72 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours ECCE 1101 Introduction to ECCE ECCE 1103 Child Growth and Development ECCE 1105 Health, Safety and Nutrition ECCE 1112 Curriculum and Assessment ECCE 1121 Early Childhood Care &Ed Practicum ECCE 2202 Social Issues & Family Involvement General Ed Area III - MATH 1101 Mathematical Modeling or MATH 1111 or MATH rd Semester 12 Hours 4th Semester 12 Hours ECCE 2201 Exceptionalities General Education Class (Any Gen Ed Area) * ENGL 1101 Composition and Rhetoric PSYC 1101 Introductory Psychology ECCE 1113 Creative Activities for Children ECCE 2115 Language and Literacy ECCE 2116 Math and Science ECCE 2203 Guidance and Classroom Mgmnt 146

49 EARLY CHILDHOOD CARE AND EDUCATION PROGRAMS 5th Semester 12 Hours 6th Semester 12 Hours ECCE Specialization Course ECCE Specialization Course General Education Area I ENGL 1101 and one other class from Area I is required General Education Area IV * ECCE 2240 ECCE Internship PARAPROFESSIONAL CONCENTRATION 8PS3 Fall Semester Only 3 Hours Spring Semester 3 Hours ECCE 2310 Methods and Materials ECCE 2312 Professional Practices PROGRAM MANAGEMENT CONCENTRATION 8P13 Fall Semester Only 3 Hours Spring Semester 3 Hours ECCE 2320 Program Admin & Facility Mgt ECCE 2322 Personnel Management EXCEPTIONALITIES CONCENTRATION Fall Semester Only ECCE 2360 Classrm Strat for Excptn Children ECCE 2362 Expl Role in Excptn Evnrnmt 8EX3 3 Hours 72 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. **ECCE Degrees include a 2-course concentration. Concentration courses are only offered on certain semesters. Check with an ECCE advisor before the deadline to change your major has expired to be sure that your student record currently has the program of study and concentration desired. For the general educational courses noted with an (*), students can select from classes listed on page All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Early Childhood Care and Education Diploma Program ECC2 The early childhood care and education diploma is a sequence of courses designed to prepare students for careers in child care and related fields. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of early childhood care and education theory and practical application necessary for successful employment. Program graduates receive an early childhood care and education diploma. (Program Length: 5 Semesters Minimum) Early childhood care and education assistant teacher 147

50 EARLY CHILDHOOD CARE AND EDUCATION PROGRAMS (51 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours ECCE 1101 Introduction to ECCE ECCE 1103 Child Growth and Development ECCE 1105 Health, Safety and Nutrition ENGL 1010 Fundamentals of English I ECCE 1112 Curriculum and Assessment ECCE 1121 Early Childhood Care & Ed Practicm ECCE 2202 Social Issues & Family Involvement MATH 1012 Foundations of Mathematics 3rd Semester 3 Hours 4th Semester 12 Hours PSYC 1010 Basic Psychology 5th Semester ECCE 2240 ECCE Internship 12 Hours ECCE 1113 Creative Activities for Children ECCE 2115 Language and Literacy ECCE 2116 Math and Science ECCE 2203 Guidance and Classroom Mgmnt 51 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Child Development Specialist CD61 The purpose of this technical certificate is to provide the necessary skills for entry-level employment as a child development specialist. Skill areas include planning a safe and healthy learning environment, steps to advance children s physical and intellectual development, positive ways to support children s social and emotional development; strategies to establish productive relationships with families, strategies to manage an effective program operation, professionalism; observing and recording children s behavior, principles of child growth and development, and planning and implementing developmentally appropriate curriculum. Technical courses apply to the degree or diploma program in early childhood. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semester Minimum) Students applying for this program must be accepted into the Early Childhood degree or diploma program. Early childhood care and education assistant teacher or aide 148

51 EARLY CHILDHOOD CARE AND EDUCATION PROGRAMS (15 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 6 Hours ECCE 1101 Introduction to ECCE ECCE 1103 Child Growth and Development ECCE 1105 Health, Safety and Nutrition ECCE 1112 Curriculum and Assessment ECCE 1121 EarlyChildhoodCare&Ed Practicum 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Early Childhood Care and Education Basics EC31 The early childhood care and education basic certificate includes three basic early childhood and care education courses that are needed for entry level workers. The program provides an introductory course to the ECCE field, a child growth and development course, and health, safety, and nutrition course. Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs. Bright from the Start (BFTS), the regulatory agency in Georgia, requires the basic knowledge included in this TCC for a person employed in a child care center and family day care center. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) Students applying for this program must be accepted into the early childhood degree or diploma program. Early childhood care and education assistant teacher or aide 1st Semester ECCE 1101 Introduction to ECCE ECCE 1103 Child Growth and Development ECCE 1105 Health, Safety and Nutrition (9 CREDIT HOURS) 9 Hours 9 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 149

52 EARLY CHILDHOOD CARE AND EDUCATION PROGRAMS Early Childhood Exceptionalities EC41 The early childhood care and education exceptionalities certificate is a sequence of three courses designed to prepare students to work with children with special needs. The program emphasizes an inclusive classroom including strategies and activities for exceptional children (both low and high achieving students). Graduates have qualifications to be employed in early care and education settings including child care centers, Head Start, and Georgia Pre-K programs. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 3 Semesters Minimum) Teacher assistants, early childhood care professionals, preschool and kindergarten teachers (private sectors), head start teachers, care program administrators, and child care center directors. (12 CREDIT HOURS) 1st Semester 3 Hours 2nd Semester 3 Hours ECCE 1103 Child Growth and Development 3rd Semester 6 Hours ECCE 2360 Classroom Strategies Exptnl Childrn ECCE 2362 Explorng Your Role Excptnl Env ECCE 2201 Exceptionalities 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION * ECCE 2360 and ECCE 2362 must be taken together and are only offered Fall semester. Early Childhood Program Administration ECP1 The purpose of the early childhood program administration technical certificate program is to provide the necessary skills to administer and manage a child-care business anywhere in Georgia, and to provide a career path for people working in the field who wish to move into administration. The courses are embedded in the existing program management concentration of the degree. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) 150

53 EARLY CHILDHOOD CARE AND EDUCATION PROGRAMS Child care center director or assistant director (9 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 3 Hours ECCE 1103 Child Growth and Development ECCE 2320 Program Admin & Facility Manage ECCE 2322 Personnel Management 9 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION * ECCE 2320 and ECCE 2322 may be taken in any order. ECCE 2320 is offered Fall semester and ECCE 2322 is offered Spring semester. Family Child Care Practitioner FC11 The family child care practitioner certificate is a sequence of six courses designed to prepare students for in-home family child care. The program emphasizes a combination of early childhood care and education theory and practical application as well as management and regulations for inhome family child care. Graduates of this certificate will have qualifications to offer quality child care in their homes or to be employed in early child and education settings including child care centers, Head Start, and Georgia Pre-K programs. (Program Length: 2 Semester Minimum) This certificate enables the graduate to meet the requirements to open and operate an In-Home Child Care Program. Graduates of this certificate will have qualifications to offer quality child care in their homes or to be employed in early child and education settings including child care centers. (18 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 9 Hours ECCE 1103 Child Growth and Development ECCE 2340 Family Child Care Program Mgt. ECCE 1101 Intro to Early Childhood Care & Ed ECCE 2342 Family Child Care Business Mgt. ECCE 1112 Curriculum and Assessment ECCE 1105 Health, Safety and Nutrition 18 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 151

54 COMPUTER INFORMATION SYSTEMS PROGRAMS Computer Programming Associate of Applied Science Degree CP23 The computer programming degree is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Program graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, systems analysis and design, database management, computer installation and maintenance, and computer networking. Program graduates receive a computer programming associate of applied science degree. (Program Length: 5 Semesters Minimum) Computer programming specialist, Business computer programmer, Programmer for Java platform, Programmer analyst (50 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 15 Hours CIST 1001 Computer Concepts CIST 1305 Program Design and Development General Education Area III MATH 1111, MATH 1100 or MATH 1101 CIST 1220 Structured Query Language-SQL CIST 1510 Web Development I CIST 2361 C++ Programming I CIST 2371 Java Programming I 3rd Semester 12 Hours 4th Semester 13 Hours CIST 2921 IT Analysis Design & Proj Manage CIST 2362 C++ Programming II ENGL 1101 Composition and Rhetoric ACCT 1100 Financial Accounting I CIST 2372 Java Programming II General Education Area II * 5th Semester General Education Area IV * 13 Hours General Education Class (any Gen Ed Area) * CIST 2931 Advanced Systems Project CIST xxxx Elective CIST 2373 Java Programming III 50 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 152

55 COMPUTER INFORMATION SYSTEMS PROGRAMS Elective(s): any CIST course(s) not already included in the curriculum. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Computer Programming Diploma Program CP24 The computer programming diploma is designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Program graduates receive a computer programming diploma. (Program Length: 5 Semesters Minimum) Computer programming specialist, Business computer programmer, Programmer for Java platform, Programmer analyst (44 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours CIST 1001 Computer Concepts CIST 1305 Program Design and Development MATH 1012 Foundations of Mathematics CIST 1220 Structured Query Language-SQL CIST 2361 C++ Programming I CIST 2371 Java Programming I 3rd Semester 12 Hours 4th Semester 12 Hours CIST 2362 C++ Programming II CIST 2372 Java Programming II CIST 2921 IT Analysis Design & Proj Manager 5th Semester CIST 2931 Advanced Systems Project 4 Hours EMPL 1000 Interpersonal Relations & Prof Dev ENGL 1010 Fundamentals of English I CIST 1510 Web Development I CIST 2373 Java Programming III 44 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 153

56 COMPUTER INFORMATION SYSTEMS PROGRAMS Game Development Associate of Applied Science Degree CSD3 The game development degree is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in the development of computer games. Program graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, game design, gaming artificial intelligence, and gaming physics. Program graduates receive a gaming development associate of applied science degree. (Program Length: 5 Semesters minimum) Game Developer, game designer, game programmers 154 (66 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 15 Hours CIST 1001 Computer Concepts CIST 1305 Program Design and Development ENGL 1101 Composition and Rhetoric General Ed Area III - MATH 1111, MATH 1100 or MATH 1101 CIST 2361 C++ Programming I CIST 2740 Intro to Game Development CIST 2742 Beginning Python Programming 3rd Semester 13 Hours 4th Semester 13 Hours CIST xxxx Elective CIST 2362 C++ Programming II CIST 2741 Advanced Game Development CIST 1130 Operating Systems Concepts CIST 2744 Advanced Game Physics CIST 2745 Intro/Artificial Intelligence CIST 2743 Introduction to Game Physics General Education Area II * 5th Semester General Education Area IV * 13 Hours General Education Class (any Gen Ed Area) * CIST2381 Mobile Application Development CIST 2746 Adv Artificial Intelligence/Game 66 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): CIST 1510, CIST 1520, CIST 1530, CIST 1540, CIST 2371 For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Note: Some courses may have additional prerequisites not listed in the curriculum. Please refer to the individual course descriptions for further information.

57 COMPUTER INFORMATION SYSTEMS PROGRAMS Game Development Diploma Program CSD4 The game development diploma is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in the development of computer games. Program graduates receive a gaming development diploma. (Program Length: 5 Semesters minimum) *Please see advisor regarding MATH requirement. Game Developer (49 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours CIST 1001 Computer Concepts CIST 1305 Program Design and Development MATH 1111 College Algebra CIST 2361 C++ Programming I CIST 2740 Intro to Game Development CIST 2742 Beginning Python Programming 3rd Semester 13 Hours 4th Semester 9 Hours CIST 2362 C++ Programming II CIST 2741 Advanced Game Development CIST 2743 Introduction to Game Physics ENGL 1010 Fundamentals of English I 5th Semester 3 Hours CIST 2746 Adv Artificial Intelligence/Game EMPL 1000 Interpersonal Relations & Prof Dev CIST 2744 Advanced Game Physics CIST 2745 Intro/Artificial Intelligence 49 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Information Security Specialist Associate of Applied Science Degree IS23 The information security specialist degree is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information 155

58 COMPUTER INFORMATION SYSTEMS PROGRAMS processing. Program graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, computer networking and information security. Program graduates receive an information security specialist associate of applied science degree. (Program Length: 5 Semesters Minimum) Information security specialists in business and industrial firms, financial institutions, government agencies, software developers, and Internet Service Providers MICROSOFT CONCENTRATION ISM3 (67 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours CIST 1001 Computer Concepts ENGL 1101 Composition and Rhetoric CIST 1122 Hardware Install & Maintenance CIST 1401 Computer Networking Fundament CIST 1601 Information Security Fund CIST 1602 Security Policies & Procedures CIST 2411 Microsoft Client 3rd Semester 16 Hours 4th Semester 14 Hours CIST 2412 Microsoft Server Directory Serv CIST xxxx Elective CIST 2601 Implement Operat Syst Security CIST 2611 Implem Internet/Intranet Firewal CIST 2612 Computer Forensics General Education Area III MATH 1111, MATH 1101 or MATH 1100 CIST 2602 Network Security General Education Area II * 5th Semester 10 Hours CIST 2413 Microsoft Server Infrastructure General Education Area IV * General Education Class (any Gen Ed area) * UNIX/LINUX CONCENTRATION ISL3 (67 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours CIST 1401 Computer Networking Fundament CIST 1001 Computer Concepts CIST 1601 Information Security Fund ENGL 1101 Composition and Rhetoric CIST 1602 Security Policies&Procedures CIST 1122 Hardware Install&Maintenance CIST 2431 Introduction UNIX/Linux 156

59 COMPUTER INFORMATION SYSTEMS PROGRAMS 3rd Semester 16 Hours 4th Semester 14 Hours CIST 2432 UNIX/Linux Server CIST 2433 UNIX/Linux Advanced Server CIST 2601 Implement Operat Syst Security CIST 2611 ImplemInternet/IntranetFirewal CIST 2612 Computer Forensics General Education Area III MATH 1111, MATH 1101, or MATH 1100 CIST 2602 Network Security General Education Area II * 5th Semester CIST xxxx Elective General Education Area IV * 10 Hours General Education Class (any Gen Ed Area) * CISCO EXPLORATION CONCENTRATION ISC3 (67 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours CIST 1001 Computer Concepts ENGL 1101 Composition and Rhetoric CIST 1401 Computer Networking Fundament CIST 1601 Information Security Fund CIST 1602 Security Policies & Procedures CIST 1122 Hardware Install & Maintenance General Education Area II * 3rd Semester 16 Hours 4th Semester 16 Hours CIST 2451 Cisco Network Fundamentals CIST 2601 Implement Operat Syst Security CIST 2602 Network Security CIST xxxx Elective 5th Semester 9 Hours General Education Area III MATH 1111, MATH 1100 or MATH 1101 General Education Area IV * General Education Class (Any Gen Ed Area) * CIST 2452 Cisco Routng Protocols & Concpts B CIST 2453 Cisco LAN Switching & Wireless C CIST 2611 Implem Internet/Intranet Firewal CIST 2612 Computer Forensics 67 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION B Term B (1 st mini semester) Course, C Term C (2 nd mini semester) Course Elective(s): any CIST, CRJU 1010, CRJU For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 157

60 COMPUTER INFORMATION SYSTEMS PROGRAMS Information Security Specialist Diploma Program IS12 The information security specialist diploma is designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Program graduates receive an information security diploma. (Program Length: 4 Semesters Minimum) Information security specialists in business and industrial firms, financial institutions, government agencies, software developers, and Internet Service Providers MICROSOFT CONCENTRATION ISM2 (56 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours CIST 1001 Computer Concepts ENGL 1010 Fundamentals of English I CIST 1122 Hardware Install & Maintenance CIST 1401 Computer Networking Fundament CIST 1601 Information Security Fund CIST 1602 Security Policies & Procedures CIST 2411 Microsoft Client 3rd Semester 16 Hours 4th Semester 13 Hours CIST 2412 Microsoft Server Directory Serv MATH 1012 Foundations of Mathematics CIST 2601 Implement Operating Syst Security CIST 2602 Network Security CIST 2611 Implem Internet/Intranet Firewall CIST 2612 Computer Forensics CIST 2413 Microsoft Server Infrastructure EMPL 1000 Interpersonal Relations & Prof Dev UNIX/LINUX CONCENTRATION ISL2 (56 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours CIST 1401 Computer Networking Fundament CIST 1001 Computer Concepts CIST 1601 Information Security Fund ENGL 1010 Fundamentals of English I CIST 1602 Security Policies & Procedures CIST 1122 Hardware Install & Maintenance CIST 2431 Introduction UNIX/Linux 158

61 COMPUTER INFORMATION SYSTEMS PROGRAMS 3rd Semester 16 Hours 4th Semester 13 Hours CIST 2432 UNIX/Linux Server CIST 2433 UNIX/Linux Advanced Server CIST 2601 Implement Operating Syst Security CIST 2602 Network Security CIST 2611 Implem Internet/Intranet Firewall CIST 2612 Computer Forensics MATH 1012 Foundations of Mathematics EMPL 1000 Interpersonal Relations & Prof Dev CISCO EXPLORATION CONCENTRATION ISC2 (56 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours CIST 1001 Computer Concepts ENGL 1010 Fundamentals of English I CIST 1122 Hardware Install & Maintenance CIST 1401 Computer Networking Fundament CIST 1601 Information Security Fund CIST 1602 Security Policies & Procedures MATH 1012 Foundations of Mathematics 3rd Semester 14 Hours 4th Semester 16 Hours CIST 2451 Cisco Network Fundamentals CIST 2601 Implement Operat Syst Security CIST 2602 Network Security EMPL 1000 Interpersonal Relat & Prof Dev CIST 2452 Cisco Routng Protocols & Concpts B CIST 2453 Cisco LAN Switching & Wireless C CIST 2611 Implem Internet/Intranet Firewal CIST 2612 Computer Forensics 56 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION B Term B (1 st mini semester) Course, C Term C (2 nd mini semester) Course Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Internet Specialist Web Site Design Associate of Applied Science Degree IS53 The internet specialist - web site design degree is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Program graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates receive an Internet specialist - web site design associate of applied science degree. (Program Length: 5 Semesters Minimum) Web designer or developer 159

62 COMPUTER INFORMATION SYSTEMS PROGRAMS (48 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours CIST 1001 Computer Concepts CIST 1305 Program Design and Development CIST 1510 Web Development I ENGL 1101 Composition and Rhetoric CIST1520 Scripting Technologies CIST 1530 Web Graphics I CIST 1601 Information Security Fund 3rd Semester 14 Hours 4th Semester 13 Hours CIST1220 Structured Query Language- SQL General Education Area II * CIST 2351 PHP Programming I CIST 2531 Web Graphics II General Education Area III MATH 1111, MATH 1101 or MATH th Semester General Education Area IV * 12 Hours General Education Class (any Gen Ed Area) * CIST 2510 Web Technologies CIST 2950 Web Systems Project CIST xxxx Elective CIST 2550 Web Development II CIST 2921 IT Analysis Design & Proj Manager 48 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): CIST1540, CIST2371, CIST2381 For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Internet Specialist Web Site Design Diploma Program IS64 The internet specialist-web site design diploma is designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates receive an Internet specialist-web site design diploma. (Program Length: 4 Semesters Minimum) Web designer or developer with IT businesses that have an e-commerce component 160

63 COMPUTER INFORMATION SYSTEMS PROGRAMS (45 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours MATH 1012 Foundations of Mathematics CIST 1001 Computer Concepts CIST1520 Scripting Technologies CIST 1305 Program Design and Development CIST 1530 Web Graphics I (Photoshop) CIST 1510 Web Development I (HTML5 & CSS) CIST 1601 Information Security Fund 3rd Semester 16 Hours 4th Semester 13 Hours CIST1220 Structured Query Language-SQL ENGL 1010 Fundamentals of English I CIST 2351 PHP Programming I CIST 2510 Web Technologies CIST 2531 Web Graphics II CIST 2550 Web Development II EMPL 1000 Interpersonal Relations & Prof Dev CIST 2921 IT Analysis Design & Project Manage CIST xxxx Elective 45 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): CIST1540, CIST2371, CIST2381 Networking Specialist Associate of Applied Science Degree NS13 The networking specialist program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates are qualified for employment as networking specialists. (Program Length: 5 Semesters Minimum) Networking specialists MICROSOFT CONCENTRATION 8M13 (65 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours CIST 1130 Operating Systems Concepts CIST 1001 Computer Concepts CIST 1401 Computer Networking Fundament ENGL 1101 Composition and Rhetoric CIST 1601 Information Security Fund CIST 1122 Hardware Install & Maintenance CIST 2411 Microsoft Client 161

64 COMPUTER INFORMATION SYSTEMS PROGRAMS 3rd Semester 15 Hours 4th Semester 13 Hours CIST xxxx Technical Elective CIST 2412 Microsoft Server Directory Serv CIST xxxx Technical Elective CIST xxxx Technical Elective CIST 2413 Microsoft Server Infrastructure General Education Area III MATH 1111, MATH 1101, or MATH 1100 CIST 1220 Structured Query Language-SQL General Education Area II * 5th Semester 10 Hours CIST 2414 Microsoft Server Administrator General Education Area IV * General Education Class (Any Gen Ed Area) * UNIX/LINUX CONCENTRATION 8L23 (65 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours CIST 1001 Computer Concepts ENGL 1101 Composition and Rhetoric CIST 1122 Hardware Install & Maintenance CIST 1130 Operating Systems Concepts CIST 1401 Computer Networking Fundament CIST 1601 Information Security Fund CIST Technical Elective 3rd Semester 13 Hours 4th Semester 11 Hours CIST xxxx Technical Elective CIST 1220 Structured Query Language-SQL General Education Area II * General Education Area IV * CIST 2431 Introduction UNIX/Linux CIST xxxx Technical Elective General Education Area III MATH 1111, MATH 1100 or MATH th Semester 11 Hours 6th Semester 4 Hours CIST 2432 UNIX/Linux Server CIST 2433 UNIX/Linux Advanced Server General Education Class (Any Gen Ed Area) * CIST 2434 UNIX/Linux Scripting CISCO EXPLORATION CONCENTRATION 8C23 (65 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours CIST 1130 Operating Systems Concepts CIST 1001 Computer Concepts CIST 1401 Computer Networking Fundament ENGL 1101 Composition and Rhetoric CIST 1601 Information Security Fund CIST 1122 Hardware Install & Maintenance CIST xxxx Technical Elective 162

65 COMPUTER INFORMATION SYSTEMS PROGRAMS 3rd Semester 13 Hours 4th Semester 11 Hours CIST xxxx Technical Elective CIST 1220 Structured Query Language-SQL General Education Area II * General Education Area IV * CIST 2451 Cisco Network Fundamentals CIST xxxx Technical Elective General Education Area III MATH 1111, MATH 1100, or MATH th Semester 11 Hours 6th Semester 4 Hours CIST 2452 Cisco Routng Protocols & Concpts B CIST 2453 Cisco LAN Switching & Wireless C General Education Class (any Gen Ed Area) * CIST 2454 CISCO Accessing the WAN 65 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION B Term B (1 st mini semester) Course, C Term C (2 nd mini semester) Course For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Elective(s): any CIST courses Note: Some courses may have additional prerequisites which are not included in the curriculum. Please refer to the individual course descriptions. Discuss elective options with the program advisor. Networking Specialist Diploma Program NS14 The networking specialist program is a sequence of courses designed to provide students with an understanding of the concepts, principles, and techniques required in computer information processing. Graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics, as well as in the technical areas of computer terminology and concepts, program design and development, and computer networking. Program graduates are qualified for employment as networking specialists. (Program Length: 4 Semesters Minimum) Networking specialists 163

66 COMPUTER INFORMATION SYSTEMS PROGRAMS MICROSOFT CONCENTRATION 8M42 (54 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 14 Hours CIST 1130 Operating Systems Concepts CIST 1001 Computer Concepts CIST 1401 Computer Networking Fundament ENGL 1010 Fundamentals of English I CIST 1601 Information Security Fund CIST 1122 Hardware Install & Maintenance CIST 2411 Microsoft Client 3rd Semester 15 Hours 4th Semester 12 Hours CIST xxxx Technical Elective CIST 2413 Microsoft Server Infrastructure CIST 2412 Microsoft Server Directory Services CIST 2414 Microsoft Server Administrator CIST xxxx Technical Elective EMPL 1000 Interpersonal Relations & Prof Dev CIST 1220 Structured Query Language-SQL MATH 1012 Foundations of Mathematics UNIX/LINUX CONCENTRATION 8LS2 (54 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours CIST 1130 Operating Systems Concepts CIST 1001 Computer Concepts CIST 1401 Computer Networking Fundament ENGL 1010 Fundamentals of English I CIST 1601 Information Security Fund CIST 1122 Hardware Install & Maintenance CIST xxxx Technical Elective 3rd Semester 12 Hours 4th Semester 4 Hours CIST xxxx Technical Elective CIST 2431 Introduction UNIX/Linux CIST 1220 Structured Query Language-SQL EMPL 1000 Interpersonal Relations & Prof Dev MATH 1012 Foundations of Mathematics 5th Semester 8 Hours 6th Semester 4 Hours CIST 2432 UNIX/Linux Server CIST 2433 UNIX/Linux Advanced Server CIST 2434 UNIX/Linux Scripting 164

67 COMPUTER INFORMATION SYSTEMS PROGRAMS CISCO EXPLORATION CONCENTRATION 8C12 (54 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours CIST 1130 Operating Systems Concepts CIST 1001 Computer Concepts CIST 1401 Computer Networking Fundament ENGL 1010 Fundamentals of English I CIST 1601 Information Security Fund CIST 1122 Hardware Install & Maintenance CIST xxxx Technical Elective 3rd Semester 12 Hours 4th Semester 4 Hours CIST xxxx Technical Elective CIST 2451 Cisco Network Fundamentals CIST 1220 Structured Query Language-SQL EMPL 1000 Interpersonal Relat & Prof Dev MATH 1012 Foundations of Mathematics 5th Semester 8 Hours 6th Semester 4 Hours CIST 2452 Cisco Routng Protocols & Concpts B CIST 2454 CISCO Accessing the WAN CIST 2453 Cisco LAN Switching & Wireless C 54 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION B Term B (1 st mini semester) Course, C Term C (2 nd mini semester) Course Elective(s): any CIST courses. Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Discuss elective options with the program advisor. Cisco Network Specialist CCNA CN71 The purpose of Cisco network specialist certificate CCNA is to teach students the principles, practices and skills needed to design, build and maintain small to medium-size local area networks and wide area networks capable of supporting national and global organizations. In addition, this technical certificate will prepare them for the Cisco Certified Network Associate (CCNA) and Cisco Certified Entry Networking Technician (CCENT) certification exams. Cisco Certified Network Associate (CCNA ) validates the ability to install, configure, operate, and troubleshoot mediumsize route and switched networks, including implementation and verification of connections to remote sites in a WAN. CCNA curriculum includes basic mitigation of security threats, introduction to wireless networking concepts and terminology, and performance-based skills. The curriculum also includes (but is not limited to) the use of these protocols: IP, Enhanced Interior Gateway Routing 165

68 COMPUTER INFORMATION SYSTEMS PROGRAMS Protocol (EIGRP), Serial Line Interface Protocol Frame Relay, Routing Information Protocol Version 2 (RIPv2), VLANs, Ethernet, access control lists (ACLs). In order to be able to take the Cisco classes, students must first apply and be admitted into the cisco network specialist CCNA or networking specialist degree or diploma programs. Applicants to this program are accepted every fall Semester. (Program Length: 3 Semesters Minimum) Network support technician, network engineer, network WAN administrator (16 CREDIT HOURS) 1st Semester 4 Hours 2nd Semester 8 Hours CIST 2451 Cisco Network Fundamentals 3rd Semester CIST 2454 CISCO Accessing the WAN 4 Hours CIST 2452 Cisco Routng Protocols & Concpts B CIST 2453 Cisco LAN Switching & Wireless C 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION B Term B (1 st mini semester) Course, C Term C (2 nd mini semester) Course Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Discuss elective options with the program advisor. Cisco CCNP Specialist CD71 The Cisco CCNP Specialist certificate program prepares experienced and career oriented students with enterprise-level networking skills, including advanced routing, switching, and troubleshooting while providing opportunities for hands-on practical experience. The program also helps prepare program students for the Cisco Certified Network Professional exams(s). The Cisco CCNP industry certification validates the ability to plan, implement, verify, and troubleshoot local wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless, and video solutions. In order to take the Cisco CCNP Specialist certificate program classes, students must first apply and be admitted into the program. Students must also have either completed the Cisco CCNA Network Specialist certificate program or have a current CCNA Certification. Applicants to this program are accepted every fall Semester. (Program Length: 3 Semesters Minimum) Network administrator, network analyst, network engineer, network specialist 166

69 COMPUTER INFORMATION SYSTEMS PROGRAMS (12 CREDIT HOURS) 1st Semester 4 Hours 2nd Semester 8 Hours CIST 2471 CCNP ROUTE:Implement IP Routng CIST 2472 CCNP SWITCH:Implemnt IP Switch 3rd Semester CIST 2473 CCNP TSHOOT: Maintaining & Troubleshooting 4 Hours 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Discuss elective options with the program advisor. Game Developer CSZ1 The computer game developer certificate provides learning opportunities which develop academic, technical, and professional knowledge and skills required for job acquisition, retention and advancement. The program emphasizes a combination of programming theory, game design, game artificial intelligence, game physics, and practical application necessary for successful employment in gaming development. Program graduates receive a technical certificate of credit in gaming development. Technical courses apply to degree and diploma programs in game development. (Program Length: 4 Semesters Minimum) Students applying for this program must be accepted into the computer game developer degree or diploma program unless they have completed the required prerequisite courses for this certificate. All prerequisite courses for this program must be met through exemption testing, transfer credit or course completion. (CIST 1305, CIST 1001, FYES 1000, CIST 2361 and MATH 1101 or MATH 1113 or MATH 1111) Please refer to individual course descriptions for further information. Game Developer (32 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 10 Hours CIST 2361 C++ Programming I CIST 2740 Intro to Game Development CIST 2742 Beginning Python Programming CIST 2362 C++ Programming II CIST 2741 Advanced Game Development CIST 2743 Introduction to Game Physics 167

70 COMPUTER INFORMATION SYSTEMS PROGRAMS 3rd Semester 7 Hours 4th Semester 3 Hours CIST 2744 Advanced Game Physics CIST 2745 Intro/Artificial Intelligence CIST 2746 Adv Artificial Intelligence/Game 32 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Cyber Crime Specialist CCR1 The cyber crime specialist certificate was created to better prepare our students to become computer forensics professionals. This program provides basic training in computer forensics and cyber crime; to produce competent entry-level computer forensics technicians. (Program Length: 2 Semesters Minimum) Information security specialists in business and industrial firms, financial institutions, government agencies, software developers, and Internet Service Providers (21 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 10 Hours CIST 1001 Computer Concepts CIST 1122 Hardware Install & Maintenance CRJU 1010 Intro to Criminal Justice CIST 1601 Information Security Fund CIST 2612 Computer Forensics CRJU 2050 Criminal Procedure 21 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 168 Data Center Specialist DC11 The data center specialist certificate provides training in data center concepts, site layout, power distribution, HVAC concepts, cabling, infrastructure, security and installation/maintenance. Upon completion, a student will have the necessary skills to work in the data center environment. Students will also be eligible to apply and receive the pc repair and network technician certificate. (Program Length: 3 Semesters Minimum) Data center operations technician, data center operator, data center technician, data center assistant.

71 COMPUTER INFORMATION SYSTEMS PROGRAMS (24 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 10 Hours CIST 1001 Computer Concepts CIST 1122 Hardware Install & Maintenance 3rd Semester CIST 2463 Data Center II 4 Hours CIST 1130 Operating Systems Concepts CIST 1401 Computer Networking Fundament CIST 2461 Data Center I 24 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Information Security Specialist IS81 The information security specialist certificate is designed to provide students with an understanding of the concepts, principles and techniques required in the field of computer information systems. Program graduates receive an Information security specialist certificate. Technical courses apply to the degree or diploma program in information security. (Program Length: 3 Semesters Minimum) Students applying for this program must be accepted into the networking or information security degree or diploma program. Information security specialists in business and industrial firms, financial institutions, government agencies, software developers, and Internet Service Providers (22 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 8 Hours CIST 1601 Information Security Fund CIST 1602 Security Policies &Procedures 3rd Semester 8 Hours CIST 2611 Implement Internet/Intranet Firewall CIST 2612 Computer Forensics CIST 2601 Implement Operating Systms Security CIST 2602 Network Security 22 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 169

72 COMPUTER INFORMATION SYSTEMS PROGRAMS Internet Specialist Web Site Developer ISE1 The curriculum in the internet specialist web site design certificate program prepares the student to create and maintain professional, high-quality web sites. Program graduates will be competent in the technical areas of web design, including web graphic design, HTML, scripting, web application server-side languages, database driven content, web project management, internet security, and mobile applications. Various software tools will be used throughout the curriculum including Microsoft Visual Studio, Adobe Web Suite and/or open source products, Program graduates earn a computer information systems technology/internet specialist web site developer certificate and will have the skills necessary for employment in the web design field or to work as a free lance web designer. The purpose of this certificate is to provide training opportunities for persons already either already employed in the computer industry or have already been trained in a related computer area and wish to upgrade their skill with advanced courses and skills (Program Length: 4 Semesters Minimum) Students applying for this program must be accepted into the internet specialist degree or diploma program unless they have completed the required prerequisite courses for this certificate. Basic Web Site Designer (35 CREDIT HOURS) 1st Semester 6 Hours 2nd Semester 9 Hours CIST 1305 Program Design and Development CIST1510 Web Development I CIST 1520 Scripting Technologies CIST 1530 Web Graphics I CIST 1601 Information Security Fund 3rd Semester 11 Hours 4th Semester 9 Hours CIST 1220 Structured Query Language-SQL CIST 2351 PHP Programming I CIST 2531 Web Graphics II CIST xxxx Elective CIST 2510 Web Technologies CIST 2550 Web Development II 35 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): CIST1540, CIST2371, CIST

73 COMPUTER INFORMATION SYSTEMS PROGRAMS Java Programmer JP11 The purpose of this certificate is to provide learning opportunities which develop academic, technical, and professional knowledge and skills required for job acquisition, retention and advancement. The program emphasizes a combination of Java programming theory and practical application necessary for successful employment. Program graduates receive a technical certificate of credit in Java Programming. Students applying to this program must complete CIST 1001 or successful completion of an exemption exam. All prerequisite courses for this program must be met through exemption testing, transfer credit or course completion. Technical courses apply to the degree or diploma program in computer programming. (Program Length: 4 Semesters Minimum) Students applying for this program must be accepted into the computer programming degree or diploma program unless they have completed the required prerequisite courses for this certificate. Programmer for Java platform (26 CREDIT HOURS) 1st Semester 7 Hours 2nd Semester 11 Hours CIST 1001 Computer Concepts CIST 1220 Structured Query Language-SQL CIST 1305 Program Design and Development CIST 1510 Web Development I CIST 2371 Java Programming I 3rd Semester 4 Hours 4th Semester 4 Hours CIST 2372 Java Programming II CIST 2373 Java Programming III 26 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 171

74 COMPUTER INFORMATION SYSTEMS PROGRAMS Linux/UNIX System Administrator LA31 The Linux/Unix system administrator certificate is designed to give students the knowledge they need to understand and maintain networks with the Linux/UNIX operating systems. All prerequisite courses for this program must be met through exemption testing, transfer credit or course completion. Technical courses apply to the degree or diploma program in networking. (Program Length: 3 Semesters Minimum) Students applying for this program must be accepted into the networking specialist degree or diploma program. Linux/UNIX system administrator (16 CREDIT HOURS) 1st Semester 4 Hours 2nd Semester 8 Hours CIST 2431 Introduction UNIX/Linux CIST 2432 UNIX/Linux Server CIST 2433 UNIX/Linux Advanced Server 3rd Semester 4 Hours 4th Semester Hours CIST 2434 UNIX/Linux Scripting 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. Network Administrator NA21 The network administrator certificate provides basic training in computer information systems networking. Students are introduced to the basic concepts of network administration. Upon graduation students will be able to install, configure, and maintain networks using Windows networking software. The student is prepared to take the MCP (Microsoft Certified Professional) exam. Technical courses apply to the degree or diploma program in networking. (Program Length: 3 Semesters Minimum) Students applying for this program must be accepted into the networking specialist degree or diploma program. 172

75 COMPUTER INFORMATION SYSTEMS PROGRAMS Network administrator, LAN administrator, Microcomputer support specialist (29 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 11 Hours CIST 1001 Computer Concepts CIST 1122 Hardware Install & Maintenance 3rd Semester 8 Hours CIST 2413 Microsoft Server Infrastructure CIST 2414 Microsoft Server Administrator CIST 1130 Operating Systems Concepts CIST 1401 Computer Networking Fundament CIST 2411 Microsoft Client 29 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. PC Repair and Network Technician PR21 The PC repair and network technician certificate is designed to enhance skills for students employed in the PC support field. The program builds on the student s computer knowledge and existing skill base. The student s skill base is enhanced with hands-on lab work incorporated in courses on operating systems, hardware maintenance, and networking. (Program Length: 2 Semesters Minimum) Microcomputer technician (17 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 7 Hours CIST 1130 Operating Systems Concepts CIST 1001 Computer Concepts CIST 1401 Computer Networking Fundament CIST 1122 Hardware Install & Maintenance 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 173

76 AIR CONDITIONING PROGRAMS Air Conditioning Technology Associate of Applied Science Degree ACT3 The air conditioning technology degree program is a sequence of courses that prepares students for careers in the air conditioning industry. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of air conditioning theory and practical application necessary for successful employment. Program graduates receive an air conditioning technology degree. (Program Length: 4 Semesters Minimum) Air conditioning service technician 174 (65 CREDIT HOURS) 1st Semester Fall 17 Hours 2nd Semester - Spring 16 Hours AIRC 1005 Refrigeration Fundamentals AIRC 1010 Refrigeration Principle & Practice AIRC 1020 Refrigeration Syst Components General Ed Area III - MATH 1111, MATH 1100, or MATH 1101 AIRC 1030 HVACR Electrical Fundamentals AIRC 1040 HVACR Electrical Motors AIRC 1050 HVACR ELCT Components & Control AIRC 1060 Air Cond System Appl & Install 3rd Semester - Summer 17 Hours 4th Semester - Fall 15 Hours AIRC 1070 Gas Heat Elective - AIRC 2060 Air Distri Syst Resid Air Cond (3 hrs) AIRC 1080 Heat Pumps and Related Systems General Ed Area I - ENGL 1101 AIRC 1090 Troubleshooting Air Cond Syst General Ed Area IV - HUMN 1101* Elective - AIRC 2040 Residential Systems Designs (5 hrs) General Ed Area II Social/behavioral Sci.* General Education Class (any Area)* 65 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): AIRC 2005, AIRC 2010, AIRC 2020, AIRC 2040, AIRC 2050, AIRC 2060, and/or ELTR For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV.

77 AIR CONDITIONING PROGRAMS Air Conditioning Technology Diploma Program ACT2 The air conditioning technology diploma is a sequence of courses that prepares students for careers in the air conditioning industry. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of air conditioning theory and practical application necessary for successful employment. Program graduates receive an air conditioning technology diploma. (Program Length: 3 Semesters Minimum) Air conditioning service technician (50 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 18 Hours AIRC 1005 Refrigeration Fundamentals AIRC 1030 HVACR Electrical Fundamentals AIRC 1010 Refrigeration Principle &Practice AIRC 1040 HVACR Electrical Motors AIRC 1020 Refrigeration Syst Components AIRC 1050 HVACR ELCT Components &Control MATH 1012 Foundations of Mathematics AIRC 1060 Air Cond System Appl & Install EMPL 1000 Interpersonal Relat & Prof Dev 3rd Semester 15 Hours AIRC 1070 Gas Heat AIRC 1080 Heat Pumps and Related Systems AIRC 1090 Troubleshooting Air Cond Syst ENGL 1010 Fundamentals of English I 50 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 175

78 AIR CONDITIONING PROGRAMS Building Maintenance Diploma Program BM22 The building maintenance program prepares students for careers in the building maintenance industry, which requires multiple maintenance competencies. The students will acquire skills in various diverse areas of maintenance and learn workplace procedures and protocol. Skills acquired include knowledge of electrical applications and practices, heating and air conditioning principles, construction methods and maintenance practices and applications. Upon successful completion of the program, graduates are prepared for entry-level employment as maintenance mechanics in apartment complexes, healthcare facilities, industrial establishments, commercial buildings, and other self-sustaining organizations. (Program Length: 4 Semesters) Building engineers, stationary engineers, maintenance supervisors, maintenance worker facility coordinators, maintenance mechanics, HVAC technicians, electricians, operations supervisors, operations techs, property managers and other in the facility operation and maintenance field. (50 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 13 Hours AIRC 1005 Refrigeration Fundamentals AIRC 1010 Refrigeration Principle & Practice AIRC 1020 Refrigeration Syst Components IDSY 1101 DC Circuit Analysis IDSY 1110 Industrial Motor Controls I EMPL 1000 Interpersonal Relat & Prof Dev IDSY 1101 AC Circuit Analysis 3rd Semester 12 Hours 4th Semester 11 Hours BFMT 1030 Fundamentals of Structural Maintenance BMFT 1040 Building Climate Controls BFMT 1050 Fundamentals of Plumbing ELTR 1205 Residential Wiring I ENGL 1010 Fundamentals of English I ELTR 1080 Commercial Wiring I MATH 1012 Foundations of Mathematics 50 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses may have additional prerequisites which are not included in the above curriculum. Please refer to individual course descriptions. 176

79 AIR CONDITIONING PROGRAMS Air Conditioning Electrical Technician ACK1 The air conditioning electrical technician certificate provides the training needed to enter the job market as an entry-level air conditioning technician assistant. Instruction will provide students with the skills and knowledge to install, test and service major electrical components of an air conditioning or refrigeration system. Technical courses apply to the diploma program in air conditioning technology. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semesters Minimum) Students applying for this program must be accepted into the air conditioning technology degree or diploma program. Students can apply to graduate from certificates when classes required are completed. Entry-level air conditioning technician assistant 1st Semester AIRC 1030 HVACR Electrical Fundamentals AIRC 1040 HVACR Electrical Motors AIRC 1050 HVACR ELCT Components&Control (12 CREDIT HOURS) 12 Hours 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 177

80 AIR CONDITIONING PROGRAMS Air Conditioning System Maintenance Technician AZ21 The air conditioning system maintenance certificate program provides the training needed to enter the job market as an entry-level air conditioning technologist. Subject matter includes the basics of both the electrical and mechanical sides of the air conditioning system. Technical courses apply to the diploma program in air conditioning technology. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the air conditioning technology degree or diploma program. Students can apply to graduate from certificates when classes required are completed. Air conditioning technician (12 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 4 Hours AIRC 1005 Refrigeration Fundamentals AIRC 1030 HVACR Electrical Fundamentals AIRC 1010 Refrigeration Principle & Practice 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 178

81 AIR CONDITIONING PROGRAMS Photovoltaic Systems Installation & Repair Technician PS11 Due to the growing demand for clean sources of energy, the sun has become a hot commodity. Solar Photovoltaics, also known as Solar PV, is the field of technology and research related to the application of solar cells for energy by converting sunlight directly into electricity. For those who wish to become professionally trained in the design and installation of PV systems, this technical certificate of credit program provides that training. Graduates will have the opportunity to enter the workforce as technicians specializing in electrical applications of installation, inspection, and repair of solar panels in the electrical construction industry. The demand for qualified technicians to install and maintain solar PV systems and other components of this rapidly evolving green technology is expected to continue to expand to account for 11 percent of global electricity production and the creation of 6.3 million jobs by Use of solar technology and the demand to increase use of the sun for energy is a hot topic, as is the desire to move the US up on that list. The available training is few and far between and even more scarce in Georgia. Gwinnett Tech specializes in meeting the needs of our community through credit and continuing education offerings; green technology is no exception. This certificate will provide the county and surrounding areas with expert training and knowledge in the installation and inspection of photovoltaic systems. As the industry continues to grow, the demand for technicians will continue to increase as well. Certain portions of this training have already been incorporated in to our existing Electrical Construction and HVAC programs, therefore the necessary equipment and trained personnel exists already to begin specialized training in this field. With the addition of only one course (ELTR 1525), GTC can award this certificate to numerous students. (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the air conditioning degree, diploma or electrical systems technology diploma and add this certificate as a second major. Students can apply to graduate from certificates when classes required are completed. Photovoltaic installation and repair Technician (15 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 5 Hours IDFC 1007 Industrial Safety Procedures IDFC 1011 Direct Current I ELTR 1020 Electrical Systems Basics I ELTR 1060 Electric Print, Schematcs, & Symbols ELTR 1525 Photovoltaic Systems 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 179

82 AIR CONDITIONING PROGRAMS Refrigeration System Service Technician RS21 The refrigeration systems servicing certificate provides the training needed to enter the job market as an entry-level refrigeration technologist. Subject matter includes the basics of both the electrical and mechanical sides of the air conditioning system. Technical courses apply to the diploma program in air conditioning technology. (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the air conditioning technology degree or diploma program. Students can apply to graduate from certificates when classes required are completed. Refrigeration technician (20 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 8 Hours AIRC 1005 Refrigeration Fundamentals AIRC 1010 Refrigeration Principle & Practice AIRC 1020 Refrigeration Syst Components AIRC 1030 HVACR Electrical Fundamentals AIRC 1040 HVACR Electrical Motors 20 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 180

83 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS Residential Construction Management Associate of Applied Science Degree CM13 The residential construction management degree helps prepare you for a leadership position in the construction industry. Graduates of this associate degree program are prepared to quickly grow into such leadership positions as contractors and subcontractors, construction superintendents, job supervisors, and estimators and schedulers. The construction management program is designed for the student who wishes to prepare for a career in some aspect of construction supervision. The associate degree program builds upon the basic diploma courses which provide a background of skills in several areas of construction. Supervision courses, drafting, project management, and accounting for construction businesses provide a management and supervisory core of courses. Computerized applications prepare the graduate for rapid advancement in today s increasingly automated construction industry. Graduates of the program will receive an associate of applied science degree in residential construction management. (Program Length: 6 Semesters minimum) Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. It is recommended that students first complete the introductory and technical carpentry courses (course numbers beginning with the letters COFC and CARP ) before attempting any of the management level courses (course numbers beginning with the letters CMTT ). Framing carpenter, form builder, roofer, siding installer, foreman, superintendent, estimator, contractor, sub-contractor DAY Program (68 CREDIT HOURS) 1st Semester Fall 15 Hours 2nd Semester 17 Hours COFC 1000 Safety COFC 1011 Overview of Build Const. Practices COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners COFC 1050 Const. Print Reading Fund COFC 1070 Site Layout, Footings and Foundation CARP 1105 Floor and Wall Framing CARP 1110 Ceiling & Roof Framing Covering CARP 1112 Exterior Finishes and Trim ENGL 1101 Composition and Rhetoric 181

84 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS 3rd Semester 7 Hours 4th Semester 13 Hours CARP 1114 Interior Finishes I General Education Area III MATH 1111 or MATH 1100 or MATH 1101 CMTT 2010 Residential Estimating Review CMTT 2020 Construction Drafting I ACCT 1100 Financial Accounting I General Education Area II * 5th Semester 13 Hours 6th Semester 3 Hours CMTT 2050 Residential Code Review General Education Class (Any Gen Ed Area) * CMTT 2130 Computerized Const. Scheduling CMTT 2170 Construction Contracting General Education Area IV * 68 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Carpentry Residential Diploma Program CA22 The carpentry diploma is a sequence of courses that prepares students for careers in the carpentry industry. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of carpentry theory and practical application necessary for successful employment. Program graduates receive a carpentry diploma and have the qualifications of an entry-level residential carpenter. (Program Length: 6 Semesters minimum) Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. Framing carpenter, finish carpenter, roofer, siding installer, lead carpenter 182

85 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS EVENING Program (47 CREDIT HOURS) 1st Semester Spring 12 Hours 2nd Semester 6 Hours COFC 1000 Safety COFC 1011 Overview of Build Const. Practices COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners COFC 1050 Const. Print Reading Fund CARP 1070 Site Layout Footings &Foundation ENGL 1010 Fundamentals of English I 3rd Semester 13 Hours 4th Semester 5 Hours CARP 1105 Floor and Wall Framing CARP 1110 Ceiling & Roof Framing Covering CARP 1114 Interior Finishes I MATH 1012 Foundations of Mathematics EMPL 1000 Interpersonal Relat & Prof Dev 5th Semester 5 Hours 6th Semester 6 Hours CARP 1112 Exterior Finishes and Trim CARP 1260 Stairs CARP 1190 Interior Finishes II 47 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Residential Construction Management Diploma Program CM12 The construction management diploma program is designed for the student who wishes to prepare for a career in some aspect of construction supervision. The diploma program in carpentry provides background skills in several areas of construction. Supervision courses, computer aided drafting, project management, and accounting for construction businesses provides a core of management and supervisory courses leading to a construction management diploma. (Program Length: 5 Semesters minimum) Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. It is recommended that students first complete the introductory and technical carpentry courses (course numbers beginning with the letters COFC and CARP ) before attempting any of the management level courses (course numbers beginning with the letters CMTT ). 183

86 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS Framing carpenter, form builder, roofer, siding installer, foreman, superintendent, estimator, contractor, sub-contractor DAY Program (63 CREDIT HOURS) 1st Semester Fall 18 Hours 2nd Semester 17 Hours COFC 1000 Safety COFC 1011 Overview of Build Const. Practices COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners CARP 1105 Floor and Wall Framing CARP 1110 Ceiling & Roof Framing Covering CARP 1112 Exterior Finishes and Trim ENGL 1010 Fundamentals of English I COFC 1050 Const. Print Reading Fund COFC 1070 Site Layout, Footings and Foundation (3) (2) 3rd Semester 7 Hours 4th Semester 12 Hours CARP 1114 Interior Finishes I MATH 1012 Foundations of Mathematics CMTT 2010 Residential Estimating Review CMTT 2020 Construction Drafting I ACCT 1100 Financial Accounting I EMPL 1000 Interpersonal Relations & Prof Dev 5th Semester 10 Hours CMTT 2050 Residential Code Review CMTT 2130 Computerized Const. Scheduling CMTT 2170 Construction Contracting 63 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Certified Construction Worker CCW1 The certified construction worker certificate offers training for the construction industry that provides students with the information and skills they need to work effectively on a construction site. Technical courses apply to the diploma program in carpentry. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. 184

87 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS Entry level to any type of construction job DAY Program (12 CREDIT HOURS) EVENING Program 1st Semester Fall 12 Hours 1st Semester Spring 12 Hours COFC 1000 Safety COFC 1011 Overview of Build Const. Practices COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners COFC 1050 Const. Print Reading Fund COFC 1000 Safety COFC 1011 Overview of Build Const. Practices COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners COFC 1050 Const. Print Reading Fund 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Finish Carpenter FC31 The finish carpenter technical certificate specializes in interior and exterior finish of a residential building. Topics covered are doors, trim, cabinets, millwork, cornice, soffit, wall covering, ceilings, cabinets and insulation. Theory along with practical application in the lab is emphasized. Technical courses apply to the diploma program in carpentry. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 4 Semesters Minimum) Students must complete COFC 1020, COFC 1030, and COFC 1050 prior to attempting the courses in the finish carpenter certificate program. Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. Finish carpenter, window & door installer, drywall installer & finisher, apprentice level employment as professional cabinetmaker EVENING Program 1st Semester Spring Prerequisites COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners COFC 1050 Const. Print Reading Fund (16 CREDIT HOURS) 8 Hours 2nd Semester Fall 4 Hours CARP 1114 Interior Finishes 185

88 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS 3rd Semester Fall 5 Hours 4th Semester Spring 2 Hours CARP 1112 Exterior Finishes and Trim CARP 1190 Interior Finishes II 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Framing Carpenter FC71 The framing carpenter technical certificate is intended to prepare individuals for employment as framers. Program completers are trained in the use of hand and power tools, materials, blueprint reading, floor, wall, ceiling and roof framing. Technical courses apply to the diploma program in carpentry. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. Prerequisites: Students must have a basic set of carpentry tools. (Program Length: 2 Semesters Minimum) Students must complete COFC 1020, COFC 1030, and COFC 1050 prior to attempting the courses in the framing carpenter certificate program. Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. Carpentry helper, carpenter, framer, lay-out and lead carpenter (20 CREDIT HOURS) DAY Program 1st Semester 11 Hours 2nd Semester 9 Hours COFC 1020 Professional Tool Use & Safety COFC 1030 Materials and Fasteners CARP 1105 Floor and Wall Framing CARP 1110 Ceiling & Roof Framing Covering COFC 1050 Const. Print Reading Fund CARP 1070 Site Layout Footing &Foundation 20 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION See Program Advisor regarding evening schedule 186

89 CARPENTRY AND CONSTRUCTION MANAGEMENT PROGRAMS Residential Construction Manager CM81 The construction manager certificate prepares experienced construction workers for entry into management positions within the residential construction industry. Management courses, drafting, project management, and accounting for construction businesses provide a management core of courses. Computerized applications prepare the graduate for rapid advancement in today s increasingly automated construction industry. Graduates of the program will receive a construction manager certificate. (Program Length: 5 Semesters minimum) It is recommended that students first complete the introductory and technical carpentry courses (course numbers beginning with the letters COFC and CARP ) before attempting any of the management level courses (course numbers beginning with the letters CMTT ). Program Director approval is required for admission to this certificate program. Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. Foreman, superintendent, estimator, contractor, sub-contractor, expediter, scheduler (49 CREDIT HOURS) DAY Program 1st Semester Fall 13 Hours 2nd Semester 14 Hours COFC 1020 Professional Tool Use & Safety CARP 1105 Floor and Wall Framing COFC 1030 Materials and Fasteners CARP 1110 Ceiling & Roof Framing Covering COFC 1050 Const. Print Reading Fund CARP 1112 Exterior Finishes and Trim CARP 1070 Site Layout Footing & Foundation 3rd Semester 4 Hours 4th Semester 10 Hours CARP 1114 Interior Finishes I CMTT 2010 Residential Estimating Review CMTT 2020 Construction Drafting I ACCT 1100 Financial Accounting I 5th Semester 10 Hours CMTT 2050 Residential Code Review CMTT 2130 Computerized Const. Scheduling CMTT 2170 Construction Contracting 51 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION See Program Advisor regarding evening schedule 187

90 COMMERCIAL CONSTRUCTION MANAGEMENT PROGRAMS Commercial Construction Management Associate of Applied Science Degree CC13 The mission of the commercial construction management program is to prepare its students to assume positions leading to increasing managerial responsibility in a variety of firms which plan and construct commercial construction projects. Graduates will be provided with the knowledge, skills and confidence necessary to effectively coordinate all of the managerial and technical aspects of a construction project. Upon graduation of the degree program, students will possess skills in problem solving, critical thinking, and communication, as well as technical and conceptual application of estimating, contract administration, contracts, scheduling, finance, safety, and means and methods of construction. The associate of applied science degree program includes commercial construction management courses and college-level general education courses. Coursework is accomplished through business simulations that prepare students to immediately and effectively impact the work environment. Student industry employment is encouraged to allow direct application of skills learned through course projects. (Program Length: 5 Semesters Minimum) Project manager, contract administrator, superintendent, estimator, project engineer, safety engineer, assistant cost engineer, quality control engineer, scheduling engineer, building inspector (59 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 14 Hours CCMN 1000 Intro to Construction & Develpmnt CCMN 1020 Building Technologies & Methods CCMN 1030 Construction Graphics CCMN 1040 Construction Safety CCMN 1060 Construction Estimating I SPCH 1101 Public Speaking General Education Area III - MATH 1111 General Education Area I ENGL rd Semester 3 Hours 4th Semester 14 Hours CCMN 2010 Construction Law CCMN 1070 Construction Estimating II CCMN 2020 Construction Scheduling MGMT 1100 Principles of Management or MGMT 1115 Leadership General Ed Area II - ECON 2105 or ECON

91 COMMERCIAL CONSTRUCTION MANAGEMENT PROGRAMS 5th Semester 14 Hours CCMN 2030 Construction Accounting & Fin Mgt CCMN 2040 Construction Project Mgt. General Education Area III * General Education Area IV * 59 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The sample schedule above reflects starting the program in the fall semester and includes summer semester. Please meet with your advisor for information on how you can take additional summer courses to complete certificates. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Commercial Construction Building Inspector CCG1 The commercial construction building inspector certificate provides students and commercial construction managers and designers with the legal requirements provided by the building code. Specific code topics include inspector/contractor communications, code administration, occupancy classifications, building limitations, construction types, fire resistance, means of egress, and structural loading. Technical courses apply to the degree program in commercial construction management. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) This certificate also aids in the preparation for both the Building Inspector and Building Plan Examiner registration exams offered by the International Code Council. Entry level municipal building inspector, code compliance officer, quality control specialist or private codes consultant 189

92 COMMERCIAL CONSTRUCTION MANAGEMENT PROGRAMS (11 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 2 Hours CCMN 1000 Intro to Construction & Developmnt CCMN 1020 Building Technologies & Methods CCMN 1030 Construction Graphics CCMN 1050 Commercial Building Code 11 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The sample schedule above reflects starting the program in the fall semester and includes summer semester. CCMN 1050 is only offered during summer semester. Commercial Construction Contract Administrator CCL1 The commercial construction contract administrator certificate provides students with the essential skills required to work for developers, architects, and construction management firms as contract administrators or owner s representatives. Contract administrators review the work of contractors to verify contract compliance. Course lectures are designed to provide comprehensive insight into the architect s view of the construction process. Technical courses apply to the degree program in commercial construction management. (Program Length: 5 Semesters Minimum) Entry-level construction contract administrator (36 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 8 Hours CCMN 1000 Intro to Construction & Developmnt CCMN 1020 Building Technologies & Methods CCMN 1030 Construction Graphics CCMN 1040 Construction Safety CCMN 1060 Construction Estimating I 3rd Semester 3 Hours 4th Semester 8 Hours CCMN 2010 Construction Law CCMN 1070 Construction Estimating II CCMN 2020 Construction Scheduling 190

93 COMMERCIAL CONSTRUCTION MANAGEMENT PROGRAMS 5th Semester 8 Hours CCMN 2030 Construction Accounting & Fin Mgt CCMN 2040 Construction Project Mgt. 36 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. The sample schedule above reflects starting the program in the fall semester and includes summer semester. Commercial Construction Estimator CCK1 The commercial construction estimator certificate prepares students to estimate commercial construction costs. In addition, bid strategy, bidding documents, systems selection, and contract modifications are discussed. Technical courses apply to the degree program in commercial construction management. (Program Length: 3 Semesters Minimum) Entry-level quantity and cost estimators with costing, design, development, construction and construction management firms (17 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 4 Hours CCMN 1000 Intro to Construction & Developmnt CCMN 1020 Building Technologies & Methods CCMN 1030 Construction Graphics 3rd Semester CCMN 1070 Construction Estimating II 4 Hours CCMN 1060 Construction Estimating I 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The sample schedule above reflects starting the program in the fall semester and does not include summer semester. CCMN 1060 is only offered during spring semester and CCMN 1070 is only offered during fall semester. 191

94 COMMERCIAL CONSTRUCTION MANAGEMENT PROGRAMS Sustainable Design and Construction SDA1 The Commercial Construction Program s Sustainable Design and Construction Certificate prepares students for application of the sustainable design and construction practices in the workplace or professional setting. The coursework will prepare the students for the demands of today s green building industry. Technical courses apply to the degree program in Commercial Construction Management. Students completing the certificate program of study will be prepared to take the LEED Green Associate examination (the exam is not included in the certificate coursework). (Program Length: 2 Semesters Minimum) Project professionals, project managers, construction managers, suppliers and facility engineers. (13 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 4 Hours CCMN 1000 Intro to Construction & Developmnt CCMN 1020 Building Technologies & Methods CCMN 1030 Construction Graphics CCMN 2080 Sustainable Design Construction 13 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The sample schedule above reflects starting the program in the fall semester and includes summer semester. CCMN 2080 is only offered during summer semester. 192

95 DRAFTING PROGRAMS Drafting Technology Associate of Applied Science Degree DT13 The drafting technology degree prepares students for employment in a variety of positions in the drafting field. The program provides learning opportunities which introduce, develop, and reinforce academic and technical knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in drafting. Graduates of the program receive an associate of applied science degree. (Program Length: Approximately 4 Semesters minimum) Students must verify degree level proficiency in math before program admission. CAD operator, drafter, detailer, equipment and supplies salesperson, reproduction technician MECHANICAL DRAFTING CONCENTRATION 8MD3 (60 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 18 Hours DFTG 1101 CAD Fundamentals DFTG 1103 Multiview/Basic Dimensioning DFTG D Mechanical Modeling MATH 1111 College Algebra DFTG 2040 Advanced 3D Modeling Mechanic DFTG 1109 Aux Views/Surface Development DFTG 1111 Fasteners MATH 1113 Precalculus ENGL 1101 Composition and Rhetoric 3rd Semester 13 Hours 4th Semester 12 Hours DFTG 1107 Adv Dimensioning/Sur Development General Education Area IV * DFTG 1113 Assembly Drawings General Education Area II * DFTG xxxx Elective (4 hrs) DFTG xxxx Elective (6hrs) 193

96 DRAFTING PROGRAMS ARCHITECTURAL DRAFTING CONCENTRATION 8AD3 (60 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 18 Hours DFTG 1101 CAD Fundamentals DFTG 1103 Multiview/Basic Dimensioning DFTG 1127 Architectural 3D Modeling MATH 1111 College Algebra DFTG 1125 Architectural Fundamentals DFTG 1129 Residential Drawing I DFTG 2030 Advanced 3D Modeling Architech MATH 1113 Precalculus ENGL 1101 Composition and Rhetoric 3rd Semester 13 Hours 4th Semester 12 Hours DFTG 1133 Commercial Drawing I General Education Area IV * DFTG 1131 Residential Drawing II General Education Area II * DFTG xxxx Elective (4 hrs) DFTG xxxx Elective (6 hrs) 59 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): DFTG 2110, DFTG 2300, DFTG 2400, DFTG 2500, DFTG 2600, DFTG 2020, DFTG 2030, DFTG 2040, DFTG 2120, ACCT 2145, CIST 1001, CHEM 1211 & CHEM 1211L, MATH 1131, PHYS 1110 & PHYS 1110L. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Drafting Technology Diploma Program DT12 The drafting diploma prepares students for employment in a variety of positions in the drafting field. The program provides learning opportunities which introduce, develop, and reinforce academic and technical knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in drafting. Graduates of the program receive a drafting diploma. Technical courses apply to the degree program in drafting technology. (Program Length: 3 Semesters Minimum) Students must verify diploma level proficiency in math before program admission. Drafter, CAD operator, detailer, equipment and supplies salesperson, reproduction technician 194

97 DRAFTING PROGRAMS MECHANICAL DRAFTING CONCENTRATION 8M32 (60 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 14 Hours DFTG 1101 CAD Fundamentals DFTG 1103 Multiview/Basic Dimensioning DFTG D Mechanical Modeling MATH 1013 Algebraic Concepts 3rd Semester DFTG 1107 Adv Dimensioning/Sur Devel DFTG 1113 Assembly Drawings 14 Hours EMPL 1000 Interpersonal Relat & Prof Dev DFTG xxxx Elective DFTG 1109 Aux Views/Surface Devel DFTG 1111 Fasteners MATH 1015 Geometry and Trigonometry ENGL 1010 Fundamentals of English I Elective(s) Mechanical Drafting Concentration: DFTG 2110, DFTG 2300, DFTG 2400, DFTG 2500, DFTG 2600, DFTG 2020, DFTG 2030, DFTG 2040, DFTG 2120, ACCT 2145, CIST ARCHITECTURAL DRAFTING CONCENTRATION 8AD2 (45 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 14 Hours DFTG 1101 CAD Fundamentals DFTG 1103 Multiview/Basic Dimensioning MATH 1012 Foundations of Mathematics 3rd Semester DFTG 1131 Residential Drawing II DFTG 1133 Commercial Drawing I 14 Hours EMPL 1000 Interpersonal Relat & Prof Dev DFTG xxxx Elective DFTG 1125 Architectural Fundamentals DFTG 1129 Residential Drawing I MATH 1015 Geometry and Trigonometry ENGL 1010 Fundamentals of English I 45 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s) Architectural Drafting Concentration: DFTG 2110, DFTG 2300, DFTG 2400, DFTG 2500, DFTG 2600, DFTG 2020, DFTG 2030, DFTG 2040, DFTG 2120, ACCT 2145, CIST

98 DRAFTING PROGRAMS Advanced CAD Technician AC51 The advanced CAD technician certificate trains the students to draw using 3D wire frames as well as solid models. A mechanical concentration is an option for students as well as architectural drawings. The students projects combine working drawings as well as 3D pictorials. Students must complete the drafter s aide certificate and the CAD operator certificate before entering the advanced CAD technician certificate. Technical courses apply to the degree or diploma program in drafting technology. Students must verify diploma level proficiency in math before program admission. (Program Length: 3 Semesters Minimum) Students applying for this program must be accepted into the drafting technology degree or diploma program. Production CAD operator, 3-D CAD operator MECHANICAL DRAFTING CONCENTRATION 8MD1 (35 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 12 Hours DFTG 1101 CAD Fundamentals DFTG 1103 Multiview/Basic Dimensioning MATH 1012 Foundations of Mathematics 3rd Semester DFTG 1111 Fasteners DFTG 1113 Assembly Drawings MATH 1013 Algebraic Concepts or MATH 1111 College Algebra 11 Hours DFTG D Mechanical Modeling DFTG 1107 Adv Dimensioning/Sur Devel DFTG 1109 Aux Views/Surface Devel 35 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 196

99 DRAFTING PROGRAMS ARCHITECTURAL DRAFTING CONCENTRATION 8AD1 (36 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 12 Hours DFTG 1101 CAD Fundamentals DFTG 1125 Architectural Fundamentals DFTG 1103 Multiview/Basic Dimensioning DFTG 1127 Archtechtural 3D Modeling DFTG 1129 Residential Drawing I MATH 1012 Foundations of Mathematics 3rd Semester DFTG 1131 Residential Drawing II DFTG 1133 Commercial Drawing I 11 Hours MATH 1111 College Algebra 36 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION CAD Operator CP41 The CAD operator certificate continues the students training in CAD teaching and then progresses to more advanced commands. Students learn how to create and edit attributes and blocks as well as XREFS. Section drawings and auxiliary views are covered. Paper space drawing is covered in depth. Students must complete the drafter s aide certificate before entering the CAD operator certificate. Technical courses apply to the degree or diploma program in drafting technology. Students must verify diploma level proficiency in math before program admission. (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the drafting technology degree or diploma program. Entry level 2-D CAD operator MECHANICAL DRAFTING CONCENTRATION 8M11 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours DFTG 1101 CAD Fundamentals DFTG D Mechanical Modeling DFTG 1103 Multiview/Basic Dimensioning DFTG 1107 Adv Dimensioning/Sur Devel DFTG 1109 Aux Views/Surface Devel 22 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 197

100 DRAFTING PROGRAMS ARCHITECTURAL DRAFTING CONCENTRATION 8A11 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours DFTG 1101 CAD Fundamentals DFTG 1125 Architectural Fundamentals DFTG 1103 Multiview/Basic Dimensioning DFTG 1127 Archtechtural 3D Modeling DFTG 1129 Residential Drawing I 22 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Drafter s Assistant DA31 This drafter s assistant certificate prepares students for employment in entry level positions. The training in this certificate prepares the student to draw dimension orthographic drawings. The students learn board drawing techniques and then progress into basic 2D CAD drawing. Students must first complete this drafter s assistant certificate before entering the CAD operator and advanced CAD operator certificates. Technical courses apply to the degree or diploma program in drafting technology. Student must verify diploma level proficiency in math before program admission. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) Students applying for this program must be accepted into the drafting technology degree or diploma program. Tracer, blueline printer, editing CAD drawing (10 CREDIT HOURS) 1st Semester DFTG 1101 CAD Fundamentals DFTG 1103 Multiview/Basic Dimensioning 10 Hours 10 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 198

101 ENGINEERING PROGRAMS Engineering Technology Associate of Applied Science Degree ET33 The engineering technology program is intended to provide the opportunity for students to explore a career in engineering at the professional level. Program graduates will receive an associate of applied science degree in engineering technology, qualifying them as engineering technicians with a specialization in mechanical engineering technology, electrical engineering technology, or industrial engineering technology. (Program Length: Approximately 4 Semesters Minimum) Engineering Technician, Engineering Assistant, Test Technician, Electrical/Electronics Engineer ELECTRICAL ENGINEERING CONCENTRATION 8E13 (66 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 14 Hours FYES 1000 First Year Experience Seminar MATH 1111 College Algebra ENGT 1000 Introduction to Engineering Technology DFTG Engineering Graphics ENGL 1101 Composition and Rhetoric MATH 1113 Precalculus ENGL 1102 Literature and Composition CHEM Chemistry I CHEM 1211L Chemistry Lab I ECET 1101 Circuit Analysis I 3rd Semester 12 Hours 4th Semester 14 Hours MATH 1131 Calculus I ECET 2101 Circuit Analysis II PHYS 1111 Introductory Physics I PHYS 1111L Introductory Physics Lab I 5th Semester ARTS 1101 Art Appreciation or MUSC 1101 Music Appreciation ECET 2120 Electrical Circuits I MATH 1132 Calculus II SPCH 1101 Public Speaking 14 Hours HIST 1111 World History I or HIST 1112 World History II ENGL 1105 Technical Communication PHYS 1112 Introductory Physics II PHYS 1112L Introductory Physics Lab II ECET 1110 Digital Systems I 66 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 199

102 COSMETOLOGY PROGRAMS 200 Cosmetology Diploma Program CO12 The cosmetology diploma is awarded after successfully completing a sequence of courses that prepares students for careers in the field of cosmetology. Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in safety, sanitation, hair treatments and manipulations, skin and nail care, receptionist skills, sales, and management. The curriculum meets state licensing requirements of the Georgia State Board of Cosmetology. Program graduates will receive a cosmetology diploma. Successful completion of the program qualifies the student to participate in the State Cosmetology Board Examination which has the authority to grant a Master Operator s License to a person passing both practical and written examinations. This program is only offered full-time, during the day. (Program Length: 4 Semesters) Prior to admission into the cosmetology diploma program students must take the compass test and score at or above the diploma level in addition to Gwinnett Technical College admission requirements. Graduation requirements All cosmetology students are required to complete all essential general and technical core courses (ENGL 1010 or ENGL 1101, MATH 1012 or MATH 1111, EMPL 1000, FYES 1000). These courses must be completed to obtain the cosmetology diploma. Professional stylist, hair designer, salon manager, receptionist, color technician, chemical texture technician, and product representative. (53 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 15 Hours COSM 1000 Intro to Cosmetology Theory COSM 1030 Haircutting Version 6 COSM 1010 Chemical Texture Services COSM 1020 Hair Care and Treatment MATH 1012 Foundations of Mathematics COSM 1040 Styling COSM 1050 Hair Color COSM 1060 Fundamentals of Skin Care ENGL 1010 Fundamentals of English I 3rd Semester 12 Hours 4th Semester 14 Hours COSM 1070 Nail Care & Advanced Techniques COSM 1080 Cosmetology Practicum I COSM 1120 Salon Management COSM 1090 Cosmetology Practicum II COSM 1100 Cosmetology Practicum III COSM 1110 Cosmetology Practicum IV EMPL 1000 Interpersonal Relat & Prof Dev 53 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit.

103 COSMETOLOGY PROGRAMS Barbering Diploma Program BA12 The barbering program is a sequence of courses that prepares students for careers in the field of barbering. Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in safety, sanitation, hair treatments and manipulations, haircutting techniques, shaving, skin care, reception, sales, and management. Successful completion of the program qualifies the student to receive a barbering diploma and participate in the State Barber Board Examination which has the authority to grant a Barbering license. This program is only offered in the evening/night time. (Program Length: 5 Semesters) Prior to admission into the barbering diploma program students must take the compass test and score at or above the diploma level in addition to Gwinnett Technical College admission requirements. Graduation requirements All barbering students are required to complete all essential general and technical core courses (ENGL 1010 or ENGL 1101, MATH 1012 or MATH 1111, EMPL 1000, FYES 1000). These courses must be completed to obtain the barbering diploma. Barber graduates will be employable as a barber, salon/shop manager, or a salon/shop owner. (51 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 8 Hours BARB 1000 Intro to Barber/Styling Implements BARB 1010 Science: Sterilization, Sanitation, and Bacteriology BARB 1020 Intro to Haircutting and Shampooing EMPL 1000 Interpersonal Relat &Prof Dev BARB 1030 Haircutting/Basic Styling BARB 1040 Shaving MATH 1012 Foundations of Mathematics 3rd Semester 11 Hours 4th Semester 11 Hours BARB 1050 Science; Anatomy and Physiology BARB 1060 Intro to Color Theory/Application BARB 1080 Advanced Haircutting/Styling BARB 1090 Skin, Scalp, Hair & Facial Trtmnts BARB 1070 Chemical Restructuring of Hair ENGL 1010 Fundamentals of English 5th Semester BARB 1100 Barber/Styling Practicum 8 Hours BARB 1110 Shop Management/Ownership 51 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. 201

104 CULINARY ARTS PROGRAMS Culinary Arts Associate of Applied Science Degree CA43 The culinary arts degree program is a sequence of courses that prepares students for the culinary profession. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of culinary theory and practical application necessary for successful employment. Program graduates receive a Culinary Arts Degree. Graduates who are current practitioners will benefit through enhancement of career potential. This program also requires student to sit for the National Restaurant Association SERVSAFE certification. This program is only offered full-time, during the day. (Program Length: 4-5 Semesters Minimum) Note: Technical courses in this program may be subject to a livework/supply reimbursement charge. Students are also required to purchase Chef s uniform, dining room uniform, textbooks and tools to include knives. Students should be able to lift 40 lbs, stand for extended periods of time and withstand temperature changes. Entry-level management positions, kitchen manager, sous chef (62 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 13 Hours CUUL 1000 Fundamentals of Culinary Arts CUUL 1110 Culinary Safety and Sanitation CUUL 1120 Principles of Cooking General Education Area III MATH 1111, MATH 1100 or MATH 1101 CUUL 1220 Baking Principles CUUL 1320 Garde Manger CUUL 1129 Fund/Restaurant Operations 3rd Semester 9 Hours 4th Semester 10 Hours CUUL 1370 Culinary Nutrition & Menu Develop CUUL 2160 Contemporary Cuisine Specific Occupational-Guided Elective General Education Area I ENGL 1101 Specific Occupational-Guided Elective General Education Area II * 5th Semester 15 Hours CUUL 2130 Culinary Practicum & Leadership General Education Area IV * General Education Class (Any Gen Ed Area) * CUUL 2190 Principles of Culinary Leadership or MGMT 1115 Leadership TOTAL CREDIT HOURS REQUIRED FOR GRADUATION

105 CULINARY ARTS PROGRAMS The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Elective(s): Elective choices include any HRTM class. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Culinary Arts Diploma Program CA44 The culinary arts diploma program is a sequence of courses that prepares students for the culinary profession. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of culinary theory and practical application necessary for successful employment. Program graduates receive a Culinary Arts Diploma. Graduates who are current practitioners will benefit through enhancement of career potential. This program also requires student to sit for the National Restaurant Association SERVSAFE certification. This program is only offered full-time, during the day. Technical courses apply to the degree program in culinary. (Program Length: 4-5 Semesters Minimum) Note: Technical courses in this program may be subject to a livework/supply reimbursement charge. Students are also required to purchase Chef s uniform, dining room uniform, textbooks and tools to include knives. Students should be able to lift 40 lbs, stand for extended periods of time and withstand temperature changes. Entry-level culinary positions (49 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 13 Hours CUUL 1000 Fundamentals of Culinary Arts CUUL 1110 Culinary Safety and Sanitation CUUL 1120 Principles of Cooking MATH 1012 Foundations of Mathematics CUUL 1220 Baking Principles CUUL 1320 Garde Manger CUUL 1129 Fund/Restaurant Operations 203

106 CULINARY ARTS PROGRAMS 3rd Semester 3 Hours 4th Semester 6 Hours CUUL 1370 Culinary Nutrition & Menu Develop 5th Semester 12 Hours CUUL 2130 Culinary Practicum & Leadership ENGL 1010 Fundamentals of English I CUUL 2190 Principles of Culinary Leadership or MGMT 1115 Leadership CUUL 2160 Contemporary Cuisine EMPL 1000 Interpersonal Relations & Prof Dev 49 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Prep Cook PC51 The prep cook certificate program provides students with entry-level training in the basics of culinary skills. Technical courses apply to the degree or diploma program in culinary arts. The program also helps prepare students for the National Restaurant Association Servsafe Sanitation Certification. (Program Length: 1-2 Semester Minimum) Note: Technical courses in this program may be subject to a livework/supply reimbursement charge. Students are also required to purchase Chef s uniform, dining room uniform, textbooks and tools to include knives. Students should be able to lift 40 lbs, stand for extended periods of time and with stand temperature changes. MATH 1012, Foundation of Mathematics is a pre/corequisite to CUUL 1000, Fundamentals of Culinary Arts and should be completed before or at the same time as CUUL Food prep positions (12 CREDIT HOURS) 1st Semester CUUL 1000 Fundamentals of Culinary Arts CUUL 1110 Culinary Safety and Sanitation CUUL 1120 Principles of Cooking 12 Hours 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 204

107 HOTEL, RESTAURANT, AND TOURISM MANAGEMENT PROGRAMS Hotel, Restaurant, and Tourism Management Associate of Applied Science Degree HM13 The hotel, restaurant, and tourism management degree prepares students to begin successful careers in the hospitality industry. The hospitality industry is the number one industry in the Atlanta metro area and the number two industry in Georgia. Numerous career opportunities are available in food and beverage management, hotel management, or tourism management. The program also helps students with customer service and management skills, key ingredients in obtaining any business related job. The associate degree program includes courses in hotel/restaurant/tourism management and college-level general education courses. (Program Length: 5 Semesters Minimum) Business Manager, hotel manager, reservations manager, catering manager, wedding and event planner, restaurant manager, country club manager, food and beverage manager, convention sales manager, front office manager, sales manager, purchasing director, travel agency manager, and flight attendant (59 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours HRTM 1100 Intro-Hotel, Rest & Tour Mgmnt HRTM 1220 Super & Lead Hospitality Indus HRTM 1140 Hotel Operations Management HRTM 1160 Food and Beverage Management HRTM 1201 Hospitality Marketing HRTM 1210 Hospitality Law HRTM 1120 Tour & Cruise Management HRTM 1110 Travel Industry &Travel Geography HRTM 1150 Event Planning 3rd Semester 12 Hours 4th Semester 12 Hours HRTM 1230 HRTM Internship General Education Elective SPCH 1101 HRTM 1130 Business Etiquette & Communicatn Elective General Education Area I ENGL th Semester General Education Area II * General Education Area IV * 6 Hours General Education Area III MATH 1111 or MATH 1100 or MATH 1101 Elective Elective 59 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 205

108 HOTEL, RESTAURANT, AND TOURISM MANAGEMENT PROGRAMS Elective(s): any HRTM class not required for program completion; ACCT 1100, ACCT 2145, CUUL 1110, EMSP 1010, HORT 1720, and MGMT A student must complete at least 15 credit hours of electives to graduate from the hotel, restaurant, and tourism management degree program. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Hotel, Restaurant, and Tourism Management Diploma Program HM12 The hotel, restaurant, and tourism management diploma prepares students to begin successful careers in the hospitality industry. The program includes courses in hotel/restaurant/tourism management and diploma-level general education courses. Technical courses apply to the degree program in hotel, restaurant, and tourism management. (Program Length: 3 Semesters Minimum) Hotel manager, reservations manager, catering manager, wedding and event planner, restaurant manager, food and beverage manager, convention sales manager, front office manager, sales manager, purchasing director, travel agency manager, and flight attendant (43 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 15 Hours HRTM 1100 Intro-Hotel, Rest &Tour Manage HRTM 1201 Hospitality Marketing HRTM 1220 Super & Lead Hospitality Indus HRTM 1210 Hospitality Law HRTM 1140 Hotel Operations Management HRTM 1120 Tour & Cruise Management HRTM 1110 Travel Industry &Travel Geography HRTM 1160 Food and Beverage Management HRTM 1150 Event Planning 3rd Semester 14 Hours HRTM 1230 HRTM Internship HRTM 1130 Business Etiquette & Communctn ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics EMPL 1000 Interpersonal Relat & Prof Dev 43 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 206

109 HOTEL, RESTAURANT, AND TOURISM MANAGEMENT PROGRAMS Elective(s): any HRTM class not required for program completion; ACCT 1100, ACCT 2145, CUUL 1110, EMSP 1010, HORT 1720, and MGMT A student must complete at least 6 credit hours of electives to graduate from the hotel, restaurant, and tourism management diploma program. Event Coordinator SES1 The event coordinator certificate prepares students to do meeting and event planning for hotels, convention centers, retirement communities, recreation departments, corporations, professional associations, non-profit organizations, or other entities that do business with the travel and tourism industry. Topics include budgeting, timing, location, catering, contract negotiations, marketing, staffing, protocol and etiquette, security, legal and ethical issues, and accommodating clients with special needs. Technical courses apply to the degree or diploma program in hotel, restaurant, and tourism management. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) Meeting planners, catering managers, conference service coordinators, hotel sales managers, special event planners, etc. 1st Semester HRTM 1201 Hospitality Marketing HRTM 1210 Hospitality Law HRTM 1150 Event Planning (9 CREDIT HOURS) 9 Hours 9 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 207

110 HOTEL, RESTAURANT, AND TOURISM MANAGEMENT PROGRAMS Food and Beverage Director FAB1 The food and beverage director certificate provides training for managers, supervisors, employees, and students who are working for or planning to work for food service operations. Technical courses apply to the degree or diploma program in hotel/restaurant/tourism management. (Program Length: 2 Semesters Minimum) Manager/supervisor in the food and beverage industry (15 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 6 Hours CUUL 1000 Fundamentals of Culinary Arts HRTM 1100 Intro-Hotel, Rest & Tour Manage CUUL 1110 Culinary Safety and Sanitation HRTM 1220 Super & Lead Hospitality Indus HRTM 1160 Food & Beverage Management 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Hotel Management Specialist HM21 The hotel management specialist certificate provides training for managers, supervisors, employees, and students who are working for or planning to work for a limited-service hotel. The hotel management specialist technical certificate of credit prepares students for entry-level employment in the field of Hotel Management. Topics include: employee training, convention and meeting-planning techniques marketing engineering aspects of the hospitality industry, hospitality law, management techniques, and leadership, and decision-making skills. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Front office manager, sales manager, executive housekeeper, accounting manager and general manager 208

111 HOTEL, RESTAURANT, AND TOURISM MANAGEMENT PROGRAMS (15 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 6 Hours HRTM 1140 Hotel Operations Management HRTM 1201 Hospitality Marketing HRTM 1150 Event Planning HRTM 1210 Hospitality Law HRTM 1220 Super & Lead Hospitality Indus 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Travel Agency Operations TAO1 The travel agency operations certificate provides basic training for students who are interested in working in the travel and tourism industry. Technical courses apply to the degree or diploma program in hotel/restaurant/tourism management. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) Travel agent, tour manager, tour escort, flight attendant, gate attendant, and ticket agent (14 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 6 Hours ENGL 1010 Fundamentals of English I HRTM 1120 Tour & Cruise Management HRTM 1201 Hospitality Marketing HRTM 1110 Travel Industry & Travel Geography 14 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 209

112 ASSOCIATE DEGREE NURSING PROGRAM Registered Nursing Program (ADN) Associate Degree in Nursing NU13 The ADN program at Gwinnett Technical College is designed to provide nursing courses over seven Semesters. In addition to the nursing courses there are core course requirements. At successful completion of the program of study the nursing student is awarded an Associate Degree in Nursing (ADN). Graduates are then eligible to apply and take the National Council Licensure Examination for Registered Nurses (NCLEX-RN). Upon successful completion of the NCLEX-RN and licensure by the Georgia Board of Nursing graduates are employed as registered nurses in a variety of settings. (Program Length: 4 Semesters plus required core prerequisites) The Gwinnett Technical College registered nursing associate degree program has initial approval by the Georgia Board of Nursing. Georgia Board of Nursing 237 Coliseum Drive Macon, Georgia The program is accredited by: Accreditation Commission for Education in Nursing (ACEN) 3343 Peachtree Road NE, Suite 850 Atlanta, GA Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not including in the total program lengths listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee acceptance. In order to begin the clinical requirements, students must complete a physical exam, tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Prerequisites must be completed by deadline. *(BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, BIOL 2117 and BIOL 2117L, ENGL 1101, FYES 1000, MATH 1111 or MATH 1101, PSYC 1101) minimum 3.0 GPA. *Note that these courses must be completed prior to the application deadline in order to be considered for program admission. Applicants must notify the admissions office once prerequisites have been completed. Additionally, BIOL 2113, BIOL 2114, and BIOL 2117 cannot be older than 5 years at acceptance. ENGL 1102 must be completed prior to start date in the nursing program. General Education Area IV and PSYC 2103 must be completed before enrolling into RNSG 2101 and RNSG

113 ASSOCIATE DEGREE NURSING PROGRAM Graduates will find opportunities in a wide variety of settings, including, but not limited to acute care in hospitals, long term care facilities, ambulatory clinics (inpatient/outpatient), physicians offices, home health care, private or governmental industries, school and hospice facilities. (39 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 10 Hours RNSG 1101 Foundations of Nursing Practice RNSG 1103 Concepts of Adult Health I RNSG 1102 Pharmacolgcl Concepts & Drug Cal RNSG 1105 Concepts of Adult Health II 3rd Semester 8 Hours 4th Semester 12 Hours RNSG 2101 Concepts in Maternal Nursing RNSG 2103 Concepts of Adult Health III RNSG 2102 Concepts of Pediatric Nursing RNSG 2105 Transition into Profession of Nursing 72 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 211

114 ASSOCIATE DEGREE NURSING BRIDGE OPTION Associate Degree in Nursing (ADN) NBO3 The associate degree nursing bridge option at Gwinnett Technical College is designed to provide nursing courses for students who have completed their education as a Licensed Practical Nurse. At successful completion of the program of study, the nursing student is awarded an Associate Degree in Nursing (ADN). Graduates are then eligible to apply and take the National Council Licensure Examination for Registered Nurses (NCLEX-RN). (Program Length: 3 Semesters plus required core prerequisites) The Gwinnett Technical College registered nursing associate degree program has full approval by the Georgia Board of Nursing. Georgia Board of Nursing 237 Coliseum Drive Macon, GA (478) The program is accredited by: Accreditation Commission for Education in Nursing (ACEU) 3343 Peachtree Road, Suite 850 Atlanta, GA Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length listed. File completion does not guarantee acceptance. In order to begin the program, students must complete a physical exam, tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Prerequisites must be completed by the deadline. These include BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, BIOL 2117 and BIOL 2117L, ENGL 1101, FYES 1000, MATH 1111 or MATH 1101, and PSYC The following core courses must be completed prior to starting the nursing transition courses: ENGL 1102, PSYC 2103, and a humanities/ fine arts elective. Students must have a minimum GPA of 3.0 on all prerequisites. Graduates will find opportunities in a wide variety of settings, including, but not limited to acute care in hospitals, long term care facilities, ambulatory clinics (inpatient/outpatient), physicians offices, home health care, private or governmental industries, school and hospice facilities. 212

115 ASSOCIATE DEGREE NURSING BRIDGE OPTION (61 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours ENGL 1101 Composition and Rhetoric BIOL 2114/L Anatomy and Physiology II /Lab PSYC 1101 Introductory Psychology General Education Area IV * BIOL 2113/L Anatomy and Physiology I /Lab MATH 1111 or MATH 1101 (Choose one) 3rd Semester 10 Hours 4th Semester 7 Hours BIOL 2117/L Introductory Microbiology /Lab ENGL 1102 Literature and Composition PSYC 2103 Human Development RNSG 1500 Bridge Professional Nursing Practice RNSG 1102 Pharmacolgcl Concepts & Drug Cal 5th Semester 10 Hours 6th Semester 12 Hours RNSG 1510 Bridge Profsnl Nursing Practicum II RNSG 2101 Concepts in Maternal Nursing RNSG 2102 Concepts of Pediatric Nursing RNSG 2103 Concepts of Adult Health III RNSG 2105 Transition into Profession of Nursing 61 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Associate Degree Nursing Paramedic Bridge Option (ADN) AD33 Pending ACEN Approval The associate degree nursing paramedic bridge option at Gwinnett Technical College is designed to provide nursing courses for students who have completed their education and obtained licensure as a paramedic. At successful completion of the program of study, the nursing student is awarded an Associate Degree in Nursing (ADN). Graduates are then eligible to apply and take the National Council Licensure Examination for Registered Nurses (NCLEX-RN). Upon successful completion of the NCLEX-RN and licensure by the Georgia Board of Nursing, graduates are employed as registered nurses in a variety of settings. (Program Length: 3 Semesters plus required core prerequisites) The Gwinnett Technical College registered nursing associate degree program has full approval by the Georgia Board of Nursing. Georgia Board of Nursing 237 Coliseum Drive Macon, GA (478)

116 ASSOCIATE DEGREE NURSING BRIDGE OPTION Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length listed. File completion does not guarantee acceptance. In order to begin the program, students must complete a physical exam, tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Prerequisites must be completed by the deadline. These include BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, BIOL 2117 and BIOL 2117L, ENGL 1101, FYES 1000, MATH 1111 or MATH 1101, and PSYC The following core courses must be completed prior to starting the nursing transition courses. ENGL 1102, PSYC 2103, and a humanities/ fine arts elective. Students must have a minimum GPA of 3.0 on all prerequisites. Graduates will find opportunities in a wide variety of settings, including, but not limited to acute care in hospitals, long term care facilities, ambulatory clinics (inpatient/outpatient), physicians offices, home health care, private or governmental industries, school and hospice facilities. (61 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 13 Hours ENGL 1101 Composition and Rhetoric BIOL 2114/L Anatomy and Physiology II /Lab PSYC 1101 Introductory Psychology General Education Area IV * BIOL 2113/L Anatomy and Physiology I /Lab MATH 1111 or MATH 1101 (Choose one) 3rd Semester 7 Hours 4th Semester 7 Hours BIOL 2117/L Introductory Microbiology /Lab ENGL 1102 Literature and Composition PSYC 2103 Human Development RNSG 1500 Bridge Professional Nursing Practice RNSG 1102 Pharmacolgcl Concepts & Drug Cal 5th Semester 10 Hours 6th Semester 12 Hours RNSG 1520 Bridge Profsnl Nursing Paramedics RNSG 2101 Concepts in Maternal Nursing RNSG 2102 Concepts of Pediatric Nursing RNSG 2103 Concepts of Adult Health III RNSG 2105 Transition into Profession of Nursing 62 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 214

117 ASSOCIATE DEGREE NURSING BRIDGE OPTION Patient Care Assistant PC21 The patient care assistant technical certificate of credit prepares students with rigorous classroom training and practice as well as the clinical experiences to perform a full range of patient care duties or services under nursing or medical direction. This includes taking vital signs, obtaining lab specimens, assisting with activities of daily living, observing and charting patient information, and reporting appropriate information to supervisors. In order to begin the clinical requirements, students must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Students who successfully complete the patient care assistant technical certificate of credit may be eligible to sit for the National Nurse Aide Assessment program (NNAAP) which determines competency to become enrolled in the State Nurse Aide Registry. (Program Length: 2 Semester Minimum) Patient care assistants, nurse aides, nurse assistants, geriatric aides, hospital attendants (22 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 10 Hours ALHS 1011 Structure & Function of the Human Body ALHS 1040 Introduction to Health Care ALHS 1090 Med Term/Allied Health Sciences EMPL 1000 Interpersonal Relations & Prof Dev ALHS 1060 Diet & Nutrition for Health Sciences NAST 1100 Nurse Aide Fundamentals 22 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 215

118 BIOSCIENCE PROGRAMS Bioscience Technology Associate of Applied Science Degree BT13 The bioscience technology degree prepares graduates to perform a number of biotechnologyrelated careers, including laboratory research, and skills to work in sophisticated biotechnology manufacturing settings. Bioscience encompasses many critical areas of research on living organisms including development of drugs and medical devices, criminal forensics, environmental science, and agricultural biotechnology. This program focuses principally on advanced biochemistry and biotechnology laboratory skills, such as analytical DNA, RNA, and protein techniques, cell culture, and microbiology. Our educational approach emphasizes critical-thinking and problem-solving skills. Prior to admission into the bioscience technology associate of applied science degree program, students must successfully complete the following courses with a cumulative grade-point-average of at least 2.5 in these courses: ENGL 1101, MATH 1111, BIOL 1111, BIOL 1111L, BSCI 1111, BSCI 1211, BIOL 2117, BIOL 2117L, FYES 1000, CHEM 1211 and CHEM 1211L. Length of time to complete prerequisites varies depending on applicant s transfer credit and/or testing results. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee program acceptance. (Program Length: 4 semesters plus required core prerequisites) The skill set provided by this program is required to work in laboratories at research universities, biotechnology and pharmaceutical companies, many major research hospitals, forensic, environmental and governmental laboratories. Additionally, these same skills are required to work at food production companies and biomanufacturing facilities that produce pharmaceuticals and vaccines for both humans and animals. Designing new medications and medical devices, improving the environment, enhancing food yield and quality are all examples of bioscience technology careers. 216 (68 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 15 Hours CHEM 1212/L Chemistry II/Lab General Education Area II * BSCI xxxx Bioscience Elective** CHEM 2211/L Organic Chemistry I/Lab** BSCI xxxx Bioscience Elective** CHEM 2300/L Quantitative Analysis/Lab** General Education Area IV * 3rd Semester 13 Hours 4th Semester 3 Hours BSCI 2220 Nucleic Acid Chemistry & Analysis** BSCI 2230 Methods of Protein Analysis** BSCI 2290 Integrative Biology** BSCI xxxx Bioscience Elective** BSCI 2230 Methods of Protein Analysis** 68 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION

119 BIOSCIENCE PROGRAMS Elective(s): BSCI 1212, BSCI 1220, BSCI 1230, BSCI 1240, BIOL 2300, BIOL 2250, CHEM 2212/L. The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. **Denotes course(s) that is/are not offered every term. Please check course descriptions in back of catalog for terms offered. Bioscience Environmental Laboratory Technologist BED1 Environmental laboratory testing is a crucial aspect of our society s environmental management. The orchestration of drinking water purification and waste water management along with pollution remediation dominate the careers available to bioscience environmental laboratory technologists. This program prepares students to work in laboratories associated with environmental management. (Program Length: 2 Semesters Minimum) This program trains students to serve as laboratory technicians and regulatory specialists in environmental science settings (e.g., water and wastewater laboratories, state and federal environmental laboratories, pollution and remediation contract companies) and industrial settings (e.g., research, quality assurance, and contracting labs). Environmental laboratory technicians may work in laboratories analyzing water, wastewater, or other environmental samples including air and soil. A wide range of chemical and biological analyses are covered in the course. (17 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 9 Hours MATH 1012 Foundations of Mathematics BSCI 1111 Introduction to Bioscience** BSCI 1211 Regulatory Compliance** BSCI 1230 Environmental Lab Testing Methods** BSCI 1240 Pollution & Remediation** 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION *Important note: some courses have prerequisites which are not included in the program. Please check the course descriptions in the back of the catalog for prerequisite requirements. **Denotes course(s) that is/are not offered every term. Please check course descriptions in back of catalog for terms offered. 217

120 BIOSCIENCE PROGRAMS Bioscience Regulatory Assurance Technologist BR21 This bioscience regulatory assurance technologist certificate will familiarize students with regulatory principles in bioscience and serve as an introduction to laboratory procedures common in quality managed bioscience laboratories. Applicants include individuals interested in changing careers and persons already working in the regulatory assurance industry. The program focuses on not only the regulatory system in the United States, but also the global trend towards international regulatory systems. (Program Length: 2 Semesters Minimum) This certificate will train students to serve as quality management specialists in quality assurance contracting labs, state and federal laboratories and biotechnology manufacturing facilities.. Graduates may work in governmental positions during regulatory monitoring and enforcement while others may work in private industry on the compliance side of the assurance field. (17 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 9 Hours ENGL 1010 Fundamentals of English I BSCI 1111 Introduction to Bioscience** BSCI 1211 Regulatory Compliance** BSCI 1212 Validatn Docmntn &Qualty Assuranc** BSCI 1220 Fundamentals of Biomanufacturing** 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION *Important note: some courses have prerequisites which are not included in the program. Please check the course descriptions in the back of the catalog for prerequisite requirements. **Denotes course(s) that is/are not offered every term. Please check course descriptions in back of catalog for terms offered. 218

121 BIOSCIENCE PROGRAMS Clinical Research Professional CR31 The clinical research professional certificate will prepare graduates to function as well-qualified, entry-level, clinical research professionals (CRPs). Students will receive the necessary preparation in clinical research site procedures, governmental and local regulatory affairs, experimental design and statistics, technical reading and writing skills focusing on clinical research applications, and bioethics education to be successful as entry level CRPs. Training will be practical and concentrate on job skills necessary to become employed and advance as a CRP. Training will also cover areas important in preparing for, BTEC 2260 the certifying examinations of the Association of Clinical Research Professionals (ACRP) or the Society of Clinical Research Associates (SoCRA). (Program Length: 3 Semesters Minimum) In order to be eligible for admission, the applicant must meet one of the following criteria: 1) current certification or licensure in a health care field or 2) a diploma/degree in science or a health care field. Potential entry level positions in research programs at major hospitals, clinics, contract research organizations (CROs), and large medical practices (23 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 8 Hours BTEC 1100 Clinical Research Methods I BTEC 1110 Clinical Research Methods II BTEC 1105 Clinical Regulatory Procedures I BTEC 2255 Clinical Regulatory Procedures II BTEC 2260 Ethics for Clinical Research BTEC 2230 Technl Comm for Clinical Research 3rd Semester 6 Hours 4th Semester Hours BTEC 2241 Clinical Research Methods III BTEC 2225 Clinical Research Design & Statistics 23 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 219

122 DENTAL ASSISTING PROGRAMS Dental Assisting Diploma Program DA12 The dental assisting diploma prepares students for employment in a variety of positions in today s dental offices. The program provides learning opportunities, which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of dental assisting. The dental assisting program is accredited by the Commission on Dental Accreditation of the American Dental Association. Graduates of the program receive a dental assisting diploma. The dental assisting program includes instruction in dental assisting with chair side and laboratory procedures, adjunctive patient care, dental office management, infection control, and patient education. The graduate may become a Certified Dental Assistant (CDA) by taking and passing the Dental Assisting National Board. This program is only offered full-time, during the day. (Program Length: 3 Semesters plus required core prerequisites) Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program lengths listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. Prerequisites must be completed by deadline. (ENGL 1010 or ENGL 1101, PSYC 1010 or PSYC 1101, FYES 1000, ALHS 1011) Private dental offices, dental schools, hospital dental departments, state and local public health departments, private dental clinics, dental clinics of the U.S. Public Health Service, the Veterans Administration, and the Armed Forces (52 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 10 Hours ENGL 1010 Fundamentals of English PSYC 1010 Basic Psychology ALHS 1011 Structure & Function of the Human Body DENA 1080 Dental Anatomy DENA 1050 Microbiology & Infection Control DENA 1070 Oral Pathology and Therapeutics 220

123 DENTAL ASSISTING PROGRAMS 3rd Semester 13 Hours 4th Semester 16 Hours DENA 1030 Preventive Dentistry DENA 1340 Dent Assist I: Gen Chairside DENA 1390 Dental Radiology DENA 1460 Dental Practicum I DENA 1350 Dent Assist II: Dental Spec & EFDA DENA 1090 Dental Assisting NBE Prep DENA 1400 Dental Practice Management DENA 1470 Dental Practicum II DENA 1480 Dental Practicum III 52 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Basic Dental Assisting BDA1 The basic dental assisting certificate provides students with entry-level training for employment in today s dental offices. The program provides learning opportunities which introduce, develop and reinforce a variety of general dental assisting duties including infection control, sterilization techniques, oral anatomy, professionalism and work ethics, CPR training and basic chair side assisting skills. Graduates of the program receive a basic dental assisting certificate. This certificate is an exit-point for students who have been accepted into the dental assisting diploma program. Technical courses apply to the diploma program in dental assisting. This program is only offered fulltime, during the day. (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the dental assisting diploma program. Private dental offices, state and local public health departments, private dental clinics and the Armed Forces (14 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 6 Hours DENA 1080 Dental Anatomy DENA 1340 Dent Assist I: General Chairside DENA 1050 Microbiology & Infection Control 14 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 221

124 DENTAL ASSISTING PROGRAMS Advanced Dental Assisting AD21 The advanced dental assisting certificate provides students with advanced level training for employment in today s dental offices. The program provides learning opportunities which introduce, develop and reinforce advanced dental assisting skills including expanded duties as required by the Georgia Board of Dentistry, oral pathology, dental practice and office management skills and a review and preparation for the Dental Assisting National Board Certification Exam. Graduates of the program receive an advanced dental assisting certificate, an expanded duties certificate and are eligible to take the Dental Assisting National Board Certification Exam. This program is only offered full-time, during the day. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Students applying to this program must be accepted into the dental assisting diploma program. Private dental offices, dental schools, hospital dental departments, state and local public health departments, private dental clinics, dental clinics of the U.S. Public Health Service, the Veterans Administration and the Armed Forces (14 CREDIT HOURS) 1st Semester 5 Hours 2nd Semester 9 Hours DENA 1390 Dental Radiology DENA 1460 Dental Practicum I DENA 1350 Dent Assist II: Dental Spec & EFDA DENA 1400 Dental Practice Management 14 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 222

125 HEALTHCARE PROGRAMS Healthcare Science: Pre-Bioscience HS21/PBS1 The healthcare science pre-bioscience certificate provides students with general core courses that serve as a foundation for further study in the degree level bioscience program or to enter the workforce as entry level professional. This is a degree level certificate. (Program Length: 3 Semester Minimum) A variety of entry level positions are available in a wide range of life science careers. Graduates are prepared for opportunities in environmental monitoring, quality control, pharmaceutical development and biological technology. (36 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 13 Hours MATH 1111 College Algebra ENGL 1101 Composition and Rhetoric BIOL 1111/L Biology I/Lab BSCI 1111 Introduction to Bioscience** 3rd Semester Chemistry Elective*** General Education Area II * General Education Area IV * 10 Hours CHEM 1211/L Chemistry I/Lab BSCI 1211 Regulatory Compliance** BIOL 2117/L Introductory Microbiology/Lab 36 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. **Denotes course(s) that is/are not offered every term. Please check course descriptions in back of catalog for terms offered. ***Chemistry Elective(s): CHEM 1212/L, CHEM 2211/L, CHEM 2300/L. 223

126 HEALTHCARE PROGRAMS Healthcare Science: Pre-Cardiovascular Technology HS21/PCR1 The healthcare science pre-cardiovascular certificate provides students with general core courses that serve as a foundation for further study in the degree level cardiovascular program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (34 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 14 Hours ENGL 1101 Composition and Rhetoric BIOL 2113/L Anatomy and Physiology I/ Lab MATH 1111 College Algebra General Education Area IV * PSYC 1101 Introductory Psychology 3rd Semester 9 Hours BIOL 2114/L Anatomy and Physiology II/ Lab ALHS 1090 MedTerm/Allied Health Sciences MATH 1127 Introduction to Statistics PHYS 1110/L Conceptual Physics/ Lab SPCH 1101 Public Speaking 35 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses in the concentrations may have additional prerequisites not listed in the curriculum. Please refer to individual course descriptions for further information. BIOL 0093 may be recommended before enrolling in BIOL For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 224

127 HEALTHCARE PROGRAMS Healthcare Science: Pre-Diagnostic Medical Sonography HS21/PDM1 The healthcare science pre-diagnostic medical sonography certificate provides students with general core courses that serve as a foundation for further study in the degree level diagnostic medical sonography program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (34 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 14 Hours ENGL 1101 Composition and Rhetoric BIOL 2113/L Anatomy and Physiology I/ Lab MATH 1111 College Algebra General Education Area IV * PSYC 1101 Introductory Psychology PHYS 1110/L Conceptual Physics/ Lab SPCH 1101 Public Speaking 3rd Semester 9 Hours 4th Semester Hours BIOL 2114/L Anatomy and Physiology II /Lab ALHS 1090 MedTerm/Allied Health Sciences MATH 1127 Introduction to Statistics 34 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Note: Some courses in the concentrations may have additional prerequisites not listed in the curriculum. Please refer to individual course descriptions for further information. BIOL 0093 may be recommended before enrolling in BIOL For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 225

128 HEALTHCARE PROGRAMS Healthcare Science: Pre-Health Information Technology HS21/PHE1 The healthcare science pre-heath information technology certificate provides students with general core courses that serve as a foundation for further study in the degree level health information technology program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (36 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours BIOL 2113/L Anatomy and Physiology I/ Lab ENGL 1101 Composition and Rhetoric General Ed Area III MATH 1111 or MATH rd Semester General Elective Class General Elective Class MAST 1120 Human Path Condition General Education Area IV * 12 Hours BIOL 2114/L Anatomy and Physiology II/ Lab SPCH 1101 Public Speaking ALHS 1090 MedTerm/Allied Health Sciences PSYC 1101 Introductory Psychology 36 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any ALHS course, BIOL 2311, EMSP 1010, SOCI 1120, or additional General Education Core class from Areas I, II, III, or IV above. Please consult pages for a list of General Education Core elective options. Note: Some courses in the concentrations may have additional prerequisites not listed in the curriculum. Please refer to individual course descriptions for further information. BIOL 0093 may be recommended before enrolling in BIOL For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 226

129 HEALTHCARE PROGRAMS Healthcare Science: Pre-Nursing HS21/AHS1 The healthcare science pre-nursing certificate provides students with general core courses that serve as a foundation for further study in a degree level nursing program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (35 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours ENGL 1101 Composition and Rhetoric BIOL 2114/L Anatomy and Physiology II /Lab PSYC 1101 Introductory Psychology General Education Area IV * BIOL 2113/L Anatomy and Physiology I /Lab 3rd Semester 10 Hours BIOL 2117/L Introductory Microbiology /Lab ENGL 1102 Literature and Composition PSYC 2103 Human Development MATH 1111 or MATH 1101 (Choose one) 35 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any ALHS course, BIOL 2311, EMSP 1010, SOCI 1120, or additional General Education Core class from Areas I, II, III, or IV above. Please consult pages for a list of General Education Core elective options. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 227

130 HEALTHCARE PROGRAMS Healthcare Science: Pre-Radiologic Technology HS21/PRA1 Currently Under Probe Review The healthcare science pre-radiologic technology certificate provides students with general core courses that serve as a foundation for further study in the degree level radiologic technology program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (36 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 12 Hours ENGL 1101 Composition and Rhetoric BIOL 2113/L Anatomy and Physiology I/ Lab General Ed Area III - MATH 1111 or MATH 1101 General Elective SPCH 1101 Public Speaking BIOL 2114/Lab Anatomy and Physiology II/ Lab ALHS 1090 MedTerm/Allied Health Sciences 3rd Semester 12 Hours 4th Semester Hours PSYC 1101 Introductory Psychology General Education Area IV * General Elective General Elective 36 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any ALHS Course, BIOL 2311, EMSP 1010, SOCI 1120, or additional General Education Core classes, PHYS 1110 & PHYS 1110L, *RADT 1010, *RADT 1030, *RADT *Require program admission Note: Some courses in the concentrations may have additional prerequisites not listed in the curriculum. Please refer to individual course descriptions for further information. BIOL 0093 may be recommended before enrolling in BIOL For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 228

131 HEALTHCARE PROGRAMS Healthcare Science: Pre-Respiratory HS21/PRE1 Currently Under Probe Review The healthcare science pre-respiratory certificate provides students with general core courses that serve as a foundation for further study in the degree level respiratory program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (35 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 10 Hours MATH 1111 College Algebra or MATH 1101 Mathematical Modeling PSYC 1101 Introductory Psychology ENGL 1101 Composition and Rhetoric General Education Area IV * BIOL 2113/L Anatomy and Physiology I/ Lab 3rd Semester 4 Hours BIOL 2117/L Introductory Microbiology/ Lab CHEM 1211/L Chemistry I/ Lab BIOL 2114/L Anatomy and Physiology II/ Lab PHYS 1110/L Conceptual Physics/ Lab 35 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 229

132 HEALTHCARE PROGRAMS Healthcare Science: Pre-Surgical HS21/PST1 The healthcare science pre-surgical technology certificate provides students with general core courses that serve as a foundation for further study in a degree level surgical technology program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) Hospitals and other institutions that have operating room, delivery room, and/or emergency room facilities; government agencies such as Veterans Administration Medical Centers and the Armed Forces; Instrument and Equipment Sales. (34 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours ENGL 1101 Composition and Rhetoric MATH 1101 Mathematical Modeling BIOL 2113/L Anatomy and Physiology I/ Lab 3rd Semester General Education Area IV * 12 Hours BIOL 2117/L Introductory Microbiology/ Lab PSYC 2103 Human Development ALHS 1090 MedTerm/Allied Health Sciences ENGL 1102 Literature and Composition PSYC 1101 Introductory Psychology BIOL 2114/L Anatomy and Physiology II/ Lab 34 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 230

133 HEALTHCARE PROGRAMS Healthcare Science: Pre-Veterinary HS21/PVE1 The healthcare science pre-veterinary technology certificate provides students with general core courses that serve as a foundation for further study in the degree level veterinary technology program. This is a degree level certificate. (Program Length: 3 Semesters Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation and assisted living facilities, and home health care agencies. (34 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 13 Hours ENGL 1101 Composition and Rhetoric General Education Class (Any Gen Ed Area) BIOL 1111/L Biology I/ Lab General Education Area IV * MATH 1111 College Algebra or MATH 1101 Mathematical Modeling CHEM 1211/L Chemistry I/ Lab General Ed Area II - PSYC 1101 * 3rd Semester Elective Elective Elective 9 Hours 34 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any ALHS courses, BIOL 2311, EMSP 1010, PSYC 2250, SOCI 1120, ACCT 1100, MKTG 1100, or additional General Education courses. Please consult pages for additional General Education course options. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 231

134 HEALTHCARE PROGRAMS Healthcare Assistant HA21 The healthcare assistant certificate provides students with general core courses that serve as a foundation for further study in a diploma level allied health program or to enter the workforce as entry level health care providers. (Program Length: 3 Semester Minimum) A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation assisted living facilities, and home care agencies. ALLIED HEALTH CONCENTRATION AHA1 (32 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 10 Hours ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics or MATH 1013 Algebraic Concepts PSYC 1010 Basic Psychology 3rd Semester 10 Hours ALHS 1180 Cultural Diversity in Healthcare ALHS 1140 Healthcare Communication ALHS 1060 Diet and Nutrition Therapy General Elective ALHS 1090 Med Term/Allied Health Sciences ALHS 1040 Introduction to Health Care ALHS 1011 Structure & Function of the Human Body MEDICAL UNIT SECRETARY CONCENTRATION MDU1 (34 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 14 Hours ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics PSYC 1010 Basic Psychology ALHS 1011 Structure & Function of the Human Body ALHS 1040 Introduction to Health Care ALHS 1090 MedTerm/Allied Health Sciences BUSN 1440 Document Production 232

135 HEALTHCARE PROGRAMS 3rd Semester BUSN 1240 Office Procedures BUSN 1400 Word Processing Elective 9 Hours 34 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION PATIENT CARE ASSISTING CONCENTRATION PCA1 (31 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 10 Hours ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics PSYC 1010 Basic Psychology 3rd Semester 10 Hours ALHS 1060 Diet & Nutrition for Health Sciences NAST 1100 Nurse Aide Fundamentals EMPL 1000 Interpersonal Relations & Prof Dev ALHS 1090 Med Term/Allied Health Sciences ALHS 1040 Introduction to Health Care ALHS 1011 Structure & Function of the Human Body 31 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION OCCUPATIONAL CONCENTRATION 12 Students may apply 12 hours of coursework from another Health Science curriculum. Some courses may require admission into the respective program Elective(s): EMPL 1000, any ALHS class, BIOL 1000, BUSN 1100, MAST 1120, EMSP

136 HEALTH IMAGING AND INFORMATICS Health Information Technology Associate of Applied Science Degree HI13 The health information technology program is a sequence of courses designed to provide students with the technical knowledge and skills necessary to process, maintain, analyze, and report health information data according to legal, accreditation, licensure and certification standards for reimbursement, facility planning, marketing, risk management, utilization management, quality assessment and research; program graduates will develop leadership skills necessary to serve in a functional supervisory role in various components of the health information system (Program Length: 6 Semesters plus required core pre-requisites) Professional positions in hospitals, physicians offices, state and federal health care agencies, clinics, managed care organizations, behavioral health facilities, consulting and law firms, ambulatory care facilities, information system vendors, insurance companies, and long-term care facilities. Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee acceptance. Prior to admission into the Health Information Technology program, students must successfully complete the following courses with a cumulative grade-point-average of at least 2.5: ENGL 1101, MATH 1111 or MATH 1100 or MATH 1101, BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, and ALHS 1090 and MAST (39 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 12 Hours HIMT 1100 Intro to Health Information Tech HIMT 1150 Computer Applications in Healthcare HIMT 1400 Coding & Classification I-ICD Coding HIMT 1410 Coding & Classification II HIMT 2150 Healthcare Statistics HIMT 1250 Health Record Content &Structure HIMT 1350 Pharmacotherapy HIMT 2300 Healthcare Management MAST 1120 Human Path Conditions HIMT 1200 Legal Aspects of Healthcare 234

137 HEALTH IMAGING AND INFORMATICS 3rd Semester 10 Hours 4th Semester 3 Hours HIMT 2400 Coding & Classification III HIMT 2200 Performance Improvement HIMT 2410 Revenue Cycle Management General Education Class (Any Gen Ed Area)* HIMT 2460 Health Information Tech Practicum 64 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Additional courses required to graduate from health information technology degree are one course from Area II, one course from Area IV, and FYES Students are advised to take these courses before they are accepted and begin the health information technology program. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Health Information Technology Certificate FNT1 This certificate is designed to prepare students with a background in healthcare or information technology to serve in one of six primary roles as a health information technology professional. The program addresses a projected shortage in the supply of trained health information technology professionals in health computer networking, software development, healthcare sales, customer service and support, and health information technology training. Instruction focuses on job specific training in six workforce roles to support electronic health record implementation in ambulatory offices, inpatient facilities, government, or other healthcare vendors, The curriculum is made possible through a grant sponsored partnership with Georgia Tech and the Midwest Community College Health Information Technology Consortium. (Program Length: 3 Semesters) Clinical Workflow Analyst/Redesign Specialist; Clinician/Practitioner Consultant; HIT Implementation Support Specialist; HIT Implementation Manager; Software Support Specialist; HIT Trainer, and related sales and customer support. The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. 235

138 HEALTH IMAGING AND INFORMATICS PRACTICE WORKFLOW & INFORMATION REDESIGN CONCENTRATION 8PW1 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours HITC 1000 Intro Hlthcare & Publ Hlth in the US HITC 1005 Health Mgmt Information Systems HITC 1010 History of Health Info Techn in US HITC 1015 Planning Mgmt & Leadership HI HITC 1020 or HITC 1025 and HITC 1030 Choose 6 Credits from the following: HITC 1055, HITC 1060, HITC 1065, HITC 1070, and HITC 1075 HITC 1040 Fund Health Wkflow Process Analysis HITC 1045 Quality Improvement HITC 1050 Usability & Human Factors Choose 6 Credits from classes below CLINICIAN/PRACTITIONER CONSULTANT CONCENTRATION 8CC1 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours HITC 1000 Intro Hlthcare & Publ Hlth in the US HITC 1005 Health Mgmt Information Systems HITC 1010 History of Hlth Info Technology in US HITC 1015 Planning Mgmt & Leadership HI HITC 1020 or HITC 1025 and HITC 1030 Choose 4 Credits from the following: HITC 1050, HITC 1065, or HITC 1080 HITC 1040 Fund Hlth Wkflow Process Analysis HITC 1045 Quality Improvement HITC 1055 Networking & Health Info Exchange HITC 1075 Working in Health IT Systems Choose 4 Credits from below IMPLEMENTATION SUPPORT CONCENTRATION 8IS1 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours HITC 1000 Intro Hlthcare & Publ Hlth in the US HITC 1005 Health Mgmt Information Systems HITC 1010 History of Hlth Info Technology in US HITC 1015 Planning Mgmt & Leadership HI HITC 1020 or HITC 1025 and HITC 1030 HITC 1040 Fund Health Wkflow Process Analysis HITC 1085 Instltn & Maintnc of Health IT Sys HITC 1055 Networking & Health Info Exchange HITC 1090 Configuring EHRs HITC 1095 Special Topics Vendor-Spec Sys HITC 1075 Working in Health IT Systems 236

139 HEALTH IMAGING AND INFORMATICS IMPLEMENTATION MANAGER CONCENTRATION 8IM1 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours HITC 1000 Intro Hlthcare & Publ Hlth in the US HITC 1005 Health Mgmt Information Systems HITC 1010 History of Hlth Info Technology in US HITC 1015 Planning Mgmt & Leadership HI HITC 1020 or HITC 1025 and HITC 1030 Choose 4 Credits from the following: HITC 1055, HITC 1050, HITC 1045, HITC 1085, or HITC 1099 HITC 1040 Fund Health Wkflow Process Analysis HITC 1065 Working in Teams HITC 1070 Intro to Project Management Choose 6 Credits from classes below SOFTWARE SUPPORT CONCENTRATION 8SS1 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours HITC 1000 Intro Hlthcare & Publ Hlth in the US HITC 1005 Health Mgmt Information Systems HITC 1010 History of Health Info Techn in US HITC 1015 Planning Mgmt & Leadership HI HITC 1020 or HITC 1025 and HITC 1030 HITC 1085 Instltn & Maintnc of Health IT Sys HITC 1055 Networking & Health Info Exchange HITC 1090 Configuring EHRs HITC 1060 Prof & Cust Service Hlth Environment HITC 1095 Special Topics Vendor-Spec Sys HITC 1075 Working in Health IT Systems TRAINER CONCENTRATION 8TS1 (22 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 12 Hours HITC 1000 Intro Hlthcare & Publ Hlth in the US HITC 1005 Health Mgmt Information System HITC 1010 History of Health Info Techn in US HITC 1015 Planning Mgmt & Leadership HI HITC 1020 or HITC 1025 and HITC 1030 HITC 1050 Usability & Human Factors HITC 1060 Prof & Cust Service Hlth Environment HITC 1099 Training& Instructional Design Choose 6 Credits from classes below 22 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Choose 4 Credits from the following: HITC 1045, HITC 1070, HITC 1065, or HITC

140 HEALTH IMAGING AND INFORMATICS Cardiovascular Technology Associate of Applied Science Degree CT13 The cardiovascular technology program is a sequence of courses that provide educational opportunities to individuals in didactic and clinical environments that will enable them to obtain skills, knowledge and attitudes necessary to graduate and become successful entry-level cardiovascular technologist specializing in Invasive cardiac catheterization or non-invasive echocardiography. Cardiovascular technology is a health technology profession centered on the evaluation, diagnosis and treatment of patients with cardiac diseases. A cardiovascular technologist performs examinations at the request or under direct supervision of a physician, is proficient in the use of analytical equipment, and provides a foundation of data from which a correct anatomic and physiologic diagnosis may be made. Graduates of the program will be eligible to sit for the Cardiovascular Credentialing International (CCI) registry exam, in their chosen specialty. This program is only offered full-time, during the day. (Program Length: 5 Semesters plus required core prerequisites) The Gwinnett Technical College Cardiovascular Technology program is accredited by the Commission on Accreditation of Allied Health Education Programs ( upon the recommendation of the Accreditation Review Committee on Education in Cardiovascular Technology. Commission on Accreditation of Allied Health Education Programs 1361 Park Street Clearwater, FL Phone: Fax: JRC-CVT 1449 Hill Street Whitinsville, MA (978) [email protected] A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation assisted living facilities, and home care agencies. Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. In order to begin the clinical requirements, students accepted into the program must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Prerequisites must be completed by published deadline. (BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, MATH 1111, ENGL 1101, PSYC 1101, SPCH 1101, HUMN 1101 or ARTS 1101 or ENGL 2130 or MUSC 1101, PHYS 1110, PHYS 1110L, MATH 1127, FYES 1000) 238

141 HEALTH IMAGING AND INFORMATICS Applicant Information Students applying to the cardiovascular technology program can earn additional points toward their application by completing ALHS 1090 and/or FYES 1000 by the application deadline. ALHS 1090 is required to graduate from the cardiovascular technology degree program. CAVT CONCENTRATION 8CT3 (62 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 13 Hours CAVT 1100 Cardiac Catheterization Fund CAVT 1002 Medical Physics CAVT 1030 Electrophysiology&Card Anatomy ECHO 1100 Echocardiography Fundamentals CAVT 1020 Cardiac Catheterization CAVT 1021 Cardiac Catheterizatn Clinc I CAVT 1090 Drug Calculations & Administrn CAVT 1080 Adv Hemodynamics&Cariac Phys 3rd Semester 10 Hours 4th Semester 13 Hours CAVT 2020 Cardiac Catheterization II CAVT 2030 Cardiac Catheterizatn Clincl II CAVT 2040 Cardiac Catheterization III CAVT 2050 Cardiac Catheterizatn Clincl III CAVT 2070 Cardiac Cathtrztn Rgstry Rev I ECHO 1550 Professional Development 5th Semester CAVT 2060 Cardiac Cathtrztn IV - EXTERNSHIP 12 Hours CAVT 2080 Cardiac Cathtrztn Rgstry Rev II ECHO CONCENTRATION 8ET3 (61 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 12 Hours CAVT 1100 Cardiac Catheterization Fund DMSO 1040 Sonographic Physics & Instrumntn CAVT 1030 Electrophysiology & Card Anatomy ECHO 1100 Echocardiography Fundamentals ECHO 1310 Echocardiography I ECHO 1360 Intro to Clinical Environment CAVT 1090 Drug Calculations & Administration CAVT 1080 Adv Hemodynamics & Cariac Phys DMSO 1080 Sonography Physics & Instrumntn Rev 3rd Semester 10 Hours 4th Semester 13 Hours ECHO 1320 Echocardiography II ECHO 1370 Echocardiography Clinical II ECHO 2310 Pediatric Echocardiography ECHO 2360 Echocardiography Clinical III ECHO 1550 Professional Development 239

142 HEALTH IMAGING AND INFORMATICS 5th Semester ECHO 2370 ECHO IV - Externship 12 Hours ECHO 2400 ECHO Compren Registry Review II 97 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Diagnostic Medical Sonography Associate of Applied Science Degree DMS3 The diagnostic medical sonography associate degree program is a sequence of courses that provides educational opportunities to individuals in didactic and clinical environments that will enable them to gain skills, knowledge and attitudes necessary to graduate and become successful entrylevel employees in the field of Diagnostic Medical Sonography. The profession requires critical thinking skills, judgment, and the ability to provide appropriate health care services. Sonographers use high frequency sound waves to produce dynamic visual pictures of internal body structures. The images are evaluated by physicians to make a medical diagnosis. Course work includes sonographic physics, sonographic identification of normal and abnormal anatomy, physiology, pathology, and pathophysiology of the abdomen, pelvis, and small parts of the adult, pediatric, and fetal patient, clinical application courses, interventional sonography, journal and case study review, and comprehensive registry reviews. In order to begin the clinical requirements, students must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test.. Program graduates receive an Associate of Applied Science Degree with a major in Diagnostic Medical Sonography and have the qualifications of a sonographer. (Program Length: 5 Semesters Minimum plus required core prerequisites) The Gwinnett Technical College Diagnostic Medical Sonography Program is accredited by the Commission on Accreditation of Allied Health Education Programs (CAAHEP). CAAHEP 1361 Park Street Clearwater, Florida (727) Program students are eligible to sit for the American Registry of Diagnostic Medical Sonography credentialing examinations (SPI, AB, OB/GYN) once specific program criteria are met. This program is only offered full-time, during the day. A variety of entry level positions are available in a wide range of health care settings such as hospitals, rehabilitation assisted living facilities, and home care agencies. 240

143 HEALTH IMAGING AND INFORMATICS Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. Prerequisites must be completed by deadline. (BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, MATH 1111, ENGL 1101, PSYC 1101, SPCH 1101, HUMN1101 or ENGL 2130 or ARTS 1101 or MUSC 1101, PHYS 1110, PHYS 1110L, MATH 1127, FYES 1000) Applicant Information Students applying to the DMS program can earn additional points toward their application by: Volunteering in the sonography lab as a patient. These volunteer hours must be completed by the application deadline. Completing ALHS 1090 by the application deadline. ALHS 1090 must be completed to graduate from the diagnostic medical sonography degree program. Graduation Requirements Students in the Diagnostic Medical Sonography Program are required to maintain a 2.5 program GPA. Students are required to pass imaging Level 1 competencies with a 75 or better during their second semester; Level II and Level III imaging competencies with an 80 or better in multiple DMSO courses. Students must pass the ARDMS Sonographic Principles and Instrumentation credentialing examination before the start of semester 4. A specific number of clinical hours are needed to meet graduation requirements. These clinical assignments may be during dayshift, second shift, or weekend shift hours. Students must attempt the ARDMS AB and OB/GYN credentialing examinations during their last semester. Additional graduation requirements apply. (63 CREDIT HOURS) 1st Semester - Fall 14 Hours 2nd Semester - Spring 13 Hours DMSO 1010 Foundations of Sonography DMSO 1020 Section Antmy & Nrml Sonography DMSO 1030 Intro to DMSO Clinical DMSO 1040 Sonographic Physics & Instrument DMSO 1070 Pelvic Sonography & First Tri OB DMSO 1050 Abdominal Sonography I DMSO 1060 Clinical Sonography I 3rd Semester - Summer 10 Hours 4th Semester - Fall 13 Hours DMSO 1100 Clinical Sonography II DMSO 1080 Sonography Physics & Instrum Rev DMSO 2020 Specialized Sonographic Procedures 5th Semester -Spring 13 Hours DMSO 2040 Comprehensive ABD and OB/GYN DMSO 2050 Clinical Sonography IV DMSO 1090 Intro to Vascular Sonography DMSO 2010 Second & Third Trimesters DMSO 2030 Clinical Sonography III 98 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 241

144 HEALTH IMAGING AND INFORMATICS Radiologic Technology Associate of Applied Science Degree RT23 Currently Under Probe Review The radiologic technology associate degree program is a sequence of courses that prepares students for positions in radiologic departments and related businesses and industries. Learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of didactic and clinical instruction necessary for successful employment. In order to begin the clinical requirements, students must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. While most clinical assignments are done between 7am and 4pm, up to six weeks of clinical will be 2pm to 10pm. All clinical assignments are within a 30 mile radius of the college. Program graduates receive a radiologic technology associate degree, have the qualifications of a radiographer, and are eligible to sit for a National Certification Examination for Radiographers. The Gwinnett Technical College radiologic technology program is accredited by the Joint Review Committee on Education in Radiologic Technology. Joint Review Committee on Education in Radiologic Technology 20 North Wacker Drive, Suite 2850 Chicago, IL (312) [email protected] Students may become certified as radiographers by taking a certification exam administered by the American Registry of Radiologic Technologists or an equivalent certifying agency. This program is only offered full-time, during the day. (Program Length: 5 Semesters plus required core prerequisites) Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not including in the total program lengths listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. Prerequisites must be completed by deadline. (BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, MATH 1111 or MATH 1101, ENGL 1101, PSYC 1101, SPCH 1101, HUMN 1101 or ENGL 2130 or ARTS 1101 or MUSC 1101) Graduation Requirements All radiologic technology students are required to pass comprehensive written exams in specific courses in order to continue in the program. These exams cover all aspects of radiography previously studied and utilized in clinic. Students must score at least 70 percent on comprehensive exams given in RADT 2340 and RADT 2350 in order to remain in the program. In addition, the student must pass three comprehensive exams in RADT 2260 (Radiologic Technology Review) with a minimum score of 70 percent on two exams and 75 percent on one exam in order to graduate from the program. General hospitals, Veterans Administration hospitals, medical laboratories, physicians and clinics, federal and state health agencies 242

145 HEALTH IMAGING AND INFORMATICS (67 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 16 Hours RADT 1010 Introduction to Radiology RADT 1030 Radiographic Procedures I RADT 1320 Clinical Radiography I ALHS 1090 MedTerm/Allied Health Sciences RADT 1060 Radiographic Procedures II RADT 1070 Principles of Imaging I RADT 1330 Clinical Radiography II 3rd Semester 8 Hours 4th Semester 16 Hours RADT 2090 Radiographic Procedures III RADT 2340 Clinical Radiography III 5th Semester 14 Hours RADT 2260 Radiologic Technology Review BIOL 2311 Human Pathophysiology RADT 2360 Clinical Radiography V RADT 1160 Principles of Imaging II RADT 1200 Principles/Rad Bio & Protection RADT 2350 Clinical Radiography IV 93 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Additional courses required to graduate from radiologic technology degree are one course from Area II, one course from Area IV, and FYES Students are advised to take these courses before they are accepted and begin the radiologic technology program. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Computed Tomography Clinical Specialist CT91 The Computed Tomography (CT) technical certificate program provides educational opportunities to the post-graduate registered Radiologic Technologist, registered Radiation Therapist and registered Nuclear Medicine Technologist in good standing. It provides students with the knowledge needed to perform CT exams, and to sit for the Post-Primary Computed Tomography Certification Examination. The academic component is designed to meet competency requirements of the American Registry of Radiologic Technologists (ARRT) exam in Computed Tomography, as well as providing for continuing educational requirements. Occupational Trends: Employment is projected to grow faster than average. Those with knowledge of more than one diagnostic imaging procedure, such as CT, MR, and mammography, will have the best employment opportunities. (Program Length: 2 Semesters) 243

146 HEALTH IMAGING AND INFORMATICS Students applying for this program must be A.R.R.T. Radiography, Nuclear Medicine, or Radiation Therapy certified in good standing. Students must maintain this certification for the duration of the program. Students are selected on a first come, first serve basis based on application completion date. Enrollment will be limited due to availability of clinical slots. In order to begin the clinical requirements, students must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Graduation Requirements Completion of all required courses. General hospitals, outpatient centers, orthopedic offices and independent imaging facilities (21 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 12 Hours RADT 2201 Intro to Computed Tomography RADT 2220 Computed Tomography Procedurs I RADT 2250 Computed Tomography Clinical I RADT 2210 CT Physics & Instrumentation RADT 2230 Computed Tomography Procedurs II RADT 2265 Computed Tomography Clinical II 21 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Magnetic Resonance Imaging Specialist MRI1 The Magnetic Resonance Imaging technical certificate program provides educational opportunities to the post-graduate registered Radiologic Technologist, registered Radiation Therapist, registered Sonographer, and registered Nuclear Medicine Technologist in good standing. It provides students with the knowledge needed to perform MRI exams, and to sit for the Post-Primary Magnetic Resonance Imaging certification Examination. The academic component is designed to meet competency requirements of the American Registry of Radiologic Technologists (ARRT) exam in Magnetic Resonance Imaging, as well as providing for continuing educational requirements. Occupational Trends: Employment is projected to grow faster than average. Those with knowledge of more than one diagnostic imaging procedure, such as CT, MR, and mammography, will have the best employment opportunities. This program is only offered full-time, during the day. (Program Length: 2 Semesters) 244

147 HEALTH IMAGING AND INFORMATICS Students applying for this program must be A.R.R.T. Radiography, Nuclear Medicine, or Radiation Therapy certified in good standing. Students must maintain this certification for the duration of the program. Students are selected on a first come, first serve basis based on application completion date. Enrollment will be limited due to availability of clinical slots. In order to begin the clinical requirements, students must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Graduation Requirements Completion of all required courses. General hospitals, outpatient centers, orthopedic offices and independent imaging facilities (24 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours MRIM 2300 Orientation & Intro to MRI MRIM 2330 MRI Physics & Instrumentation MRIM 2320 MRI Proc&Cross Sect Anatomy MRIM 2370 MRI Review MRIM 2350 MRI Clinical Education I MRIM 2360 MRI Clinical Education II 24 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 245

148 MEDICAL ASSISTING PROGRAMS Medical Assisting Diploma Program MA22 The medical assisting diploma prepares students for employment in a variety of positions in today s medical offices. The program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of medical assisting. Graduates of the program receive a Medical Assisting diploma. The goal of the medical assisting program is to prepare competent entry-level medical assistants in the cognitive (knowledge), psychomotor (skills), and affective (behaviors) domain. This program is only offered full-time, during the day. Once a student starts courses with a MAST prefix, the student must complete them in the order outlined in the sample schedule. Due to guidelines set forth for work product by the accrediting body, students must complete all MAST courses at GTC in order to complete the program. (Program length: 5 Semesters Minimum) The Gwinnett Technical College Diploma level Medical Assisting Program is accredited by the Commission on Accreditation of Allied Health Education Programs ( upon the recommendation of the Medical Assisting Education Review Board (MAERB). Commission on Accreditation of Allied Health Education Programs 1361 Park Street Clearwater, FL (727) Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. Prerequisites must be completed by the deadline for fall admission with a 2.5 GPA. (ALHS 1040, ALHS 1090, ALHS 1011, ENGL 1010 or ENGL 1101, MATH 1012 or MATH 1111, PSYC 1010 or PSYC 1101, BUSN 1440 and FYES 1000.) Once a file is complete, applicants are required to take the Health Occupations Basic Entrance test administered in the Assessment Center and a competitive admission process begins. Graduation Requirements Completion of all courses. All Medical Assisting students are required to pass a comprehensive exit exam with a score of 70% or better or pass the CMA (AAMA) Certification Exam. The comprehensive exam is administered in MAST 1180, Medical Assisting Seminar. Medical assistants are multi-skilled allied health professionals specifically trained to work in ambulatory settings, such as physicians offices, clinics, and group practices, performing administrative and clinical procedures 246

149 MEDICAL ASSISTING PROGRAMS (60 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 14 Hours ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics PSYC 1010 Basic Psychology ALHS 1011 Structure & Function of the Human Body ALHS 1040 Introduction to Health Care ALHS 1090 MedTerm/Allied Health Sciences BUSN 1440 Document Production 3rd Semester 13 Hours 4th Semester 13 Hours MAST 1010 Legal&EthicConcerns/Med Office MAST 1060 Medical Office Procedures MAST 1080 Medical Assisting Skills I MAST 1120 Human Path Condition 5th Semester 9 Hours MAST 1170 Medical Assisting Externship MAST 1180 Medical Assisting Seminar MAST 1030 Pharmacology in the Med Office MAST 1090 Medical Assisting Skills II MAST 1100 Medical Insurance Management MAST 1110 Administrative Practice Manage 60 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 247

150 RESPIRATORY CARE PROGRAM Respiratory Care Associate of Applied Science Degree RCT3 Currently Under Probe Review The goal of the respiratory care program is to prepare graduates with demonstrated competence in the cognitive (knowledge), psychomotor (skills), and affective (behavior) learning domains of respiratory care practice as performed by registered respiratory therapists (RRTs). Learning opportunities develop academic and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes specialized training in areas such as pulmonary and cardiac pharmacology, medical gases, humidity/aerosol therapy, positive pressure ventilation, incentive spirometry, patient assessment, postural drainage, percussion/vibration, assessment of diseases and conditions, critical respiratory care, advanced critical care monitoring, pulmonary function testing, and pediatric and neonatal respiratory care. In order to begin the clinical requirements, students must complete tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. Program graduates receive a respiratory care associate degree which qualifies them to take the examinations to become a Registered Respiratory Therapist. The Gwinnett Technical College Respiratory Care program is accredited by the Commission on Accreditation for Respiratory Care ( Commission on Accreditation for Respiratory Care 1248 Harwood Road Bedford, Texas (817) Commission on Accreditation for Respiratory Care Programmatic Outcomes Data: com/47.html Students may become certified by taking the Entry Level Certification Examination administered by the National Board for Respiratory Care. Upon successful completion of the Certification (CRT) Exam, the graduate is eligible to take both parts of the Registry (RRT) Exams. To work in the state of Georgia, all respiratory care practitioners must apply and be granted a license. The only way to obtain a license is to pass at least the Entry Level Certification Exam. This program is only offered full-time, during the day. (Program Length: 4 Semesters plus required core prerequisites) Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not including in the total program lengths listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. Students must complete all prerequisite courses prior to the admission deadline of September 1 st with a minimum 2.5 GPA on the seven prerequisite courses. (ENGL 1101; CHEM 1211 and CHEM 1211L, or ALHS 1127; PHYS 1110 and PHYS 1110L, or PHYS 1111 and PHYS 1111L, or ALHS 1126; MATH 1111 or 1101 or 1113; BIOL 2113 and BIOL 2113L; BIOL 2114 and BIOL 2114L; BIOL 2117 and BIOL 2117L). 248

151 RESPIRATORY CARE PROGRAM Graduation Requirements All respiratory care students are required to pass three comprehensive examinations in order to graduate from the program. The three comprehensive exams are administered in RESP 2170, Advanced Respiratory Care Seminar. General hospitals, clinics, sales and service of equipment, Veterans Administration hospitals, home healthcare, nursing homes and physician offices. (54 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 12 Hours RESP 1110 Pharmacology RESP 1193 Cardiopulmonary A & P RESP 2090 Clinical Practices I RESP 2110 Pulmonary Disease RESP 1120 Intro to Respiratory Therapy RESP 1130 Respiratory Therapy Lab I RESP 2100 Clinical Practice II RESP 2180 Clinical Practice III RESP 2140 Adv Critical Care Monitoring 3rd Semester 15 Hours 4th Semester 12 Hours RESP 2120 Critical Respiratory Care RESP 2130 Mech Vent & Airway Management RESP 2160 Neonatal Pediatric Resp Care RESP 2190 Clinical Practice IV RESP 2200 Clinical Practice V RESP 2150 Pulmonary Function Testing RESP 2170 Adv Respiratory Care Seminar RESP 2270 Rehabilitation and Home Care RESP 2220 Clinical Practice VI 89 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Additional courses required to graduate from respiratory care degree are one course from Area II, one course from Area IV, and FYES Students are advised to take these courses before they are accepted and begin the respiratory program. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 249

152 SURGICAL TECHNOLOGY PROGRAMS Surgical Technology Associate of Applied Science Degree ST13 The surgical technology degree program prepares students for employment in a variety of positions in the surgical field. The surgical technology degree program provides learning opportunities which introduce, develop, and reinforce academic and technical knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in surgical technology. Graduates of the program receive a surgical technology degree and are qualified for employment as surgical technologists. The Gwinnett Technical College Surgical Technology program is accredited by the Commission on Accreditation of Allied Health Education Programs ( upon the recommendation of the Accreditation Review Committee on Education in Surgical Technology and Surgical Assisting. Commission on Accreditation of Allied Health Education Programs 1361 Park Street Clearwater, FL Phone: Fax: ARCSTSA 6 W. Dry Creek Circle, Suite #110 Littleton, CO Phone: Students will become certified as a surgical technologist by taking the National Surgical Technologists Certification Exam. (NBSTSA) National Board of Surgical Technology and Surgical Assisting. This program is only offered full-time, during the day. (Program Length: 6 Semesters plus prerequisite core completion.) Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not included in the total program length. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. In order to begin the clinical requirements, students must complete a tuberculosis skin test, supply proof of immunization, undergo a background check, and submit to a drug screen test. File completion does not guarantee an interview or acceptance into the program. Prerequisites must be completed by the program deadline. (BIOL 2113 and BIOL 2113L, BIOL 2114 and BIOL 2114L, BIOL 2117 and BIOL 2117L, ALHS 1090, ENGL 1101, ENGL 1102, General Education Area IV course, MATH 1111 or MATH 1101, PSYC 1101, PSYC 2103, FYES 1000) Minimum 2.5 GPA Special Admission for Current Surgical Technologists Applicants who have previously completed a Surgical Technology diploma program may apply for admission to the associate degree program in order to complete the degree-level General Education Core Courses and Essential Technical Courses. Applicants must submit transcripts 250

153 SURGICAL TECHNOLOGY PROGRAMS showing successful completion of a TCSG accredited Surgical Technology diploma program. In addition, applicants must submit proof of current Certified Surgical Technologist (CST) certification. Prerequisites: ENGL 1101, MATH 1111 or MATH 1101, and BIOL 2113 and BIOL 2113L. A minimum of 40% of program requirements bust be completed at Gwinnett Tech in order to earn the Surgical Technology Degree. Graduation Requirements All surgical technology students are required to pass a comprehensive exit exam with a score of 70 percent or better in order to complete the program. The comprehensive exam is administered in SURG 2240, Seminar in Surgical Technology. Students must complete a minimum of 120 total scrub cases: 80 first scrub; 40 second scrub. Hospitals and other institutions that have operating room, delivery room, and/or emergency room facilities; government agencies such as Veterans Administration Medical Centers and the Armed Forces; Instrument and Equipment Sales (41 CREDIT HOURS) 1st Semester 17 Hours 2nd Semester 12 Hours SURG 1010 Intro to Surgical Technology SURG 1020 Principles of Surgical Tech SURG 1080 Surgical Microbiology 3rd Semester SURG 2040 Surgical Procedures II 12 Hours SURG 2130 Surgical Technology Pract IV SURG 2140 Surgical Technology Pract V SURG 2240 Seminar in Surgical Technology SURG 1100 Surgical Pharmacology SURG 2110 Surgical Technical Clinical I SURG 2030 Surgical Procedures I SURG 2120 Surgical Technology Pract III 76 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION ALHS 1090, FYES 1000, BIOL 2114 and BIOL 2114L, BIOL 2117 and BIOL 2117L, ENGL 1102, General Education Area IV course, PSYC 1101 and PSYC 2103 must be completed to graduate from the surgical technology degree program. * Students must complete all prerequisite courses prior to the admission deadline (June 1 for Fall and September 1 for Spring term) with a 2.5 GPA * BIOL 2113, BIOL 2114, and BIOL 2117 must be taken within 5 years of program acceptance. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 251

154 EMERGENCY SERVICES EDUCATION PROGRAMS Paramedicine Associate of Applied Science Degree PT13 The paramedicine associate in applied science degree program prepares students to provide advanced emergency medical care for critical and emergent patients who access the emergency medical system. This individual possesses the complex knowledge and skills necessary to provide patient care and transportation. Paramedics function as part of a comprehensive EMS response, under medical oversight. Paramedics perform interventions with the basic and advanced equipment typically found on an ambulance. The paramedic is a link from the scene into the health care system. The paramedicine degree program prepares students for employment in paramedic positions in today s health services field. The paramedic degree program provides learning opportunities that introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The program provides opportunities to upgrade present knowledge and skills from the EMT/EMT-I 1985/AEMT levels to a paramedic level. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians (NREMT) Paramedic certification examination and apply for licensure with the Georgia State Office of Emergency Medical Services and Trauma (SOEMST) as a paramedic. The program is approved by the Georgia Department of Community Health, Office of EMS and Trauma. The EMS program is accredited by the Commission on Accreditation of Allied Health Education Programs ( upon the recommendation of the Committee on Accreditation for Educational Programs for the Emergency Medical Services Profession ( Commission on Accreditation of Allied Health Education Programs 1361 Park Street Clearwater, FL (727) Graduates of the program receive a paramedicine degree and are eligible to sit for the Paramedic National Registry Examination for national certification and state licensure. (Program Length: 5 Semesters Minimum) Entrance Requirements: In addition to the standard college entrance requirements, those applying to the paramedicine degree program must hold current certification and/or licensure as an: EMT (with successful completion of AEMT coursework); EMT-Intermediate/1985; EMT Intermediate/99; or AEMT. Criminal background checks and drug screens will be required based on the requirements for participation in clinical experiences. Emergency Medical Services, hospital emergency departments, aeromedical transport, armed forces, industry, urgent care clinics, physicians offices, local fire and police service. 252

155 EMERGENCY SERVICES EDUCATION PROGRAMS (69 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 13 Hours ENGL 1101 Composition and Rhetoric BIOL 2114/L Anatomy and Physiology II/Lab* BIOL 2113/L Anatomy and Physiology I/Lab* General Education Area II * MATH 1111 College Algebra or MATH 1101 Math Modeling General Education Area IV * General Education Class (any Gen Ed Area) 3rd Semester 13 Hours 4th Semester 9 Hours EMSP 2110 Foundations of Paramedicine EMSP 2120 Appl of Pathophyslgy for Para EMSP 2130 Adv Resuscitative Skills Para EMSP 2140 Adv Cardiovascular Concepts EMSP 2310 Therapeutic Modalities of Card EMSP 2330 Therapeutic Modalites Trauma EMSP 2540 Clinical App for Paramedic IV EMSP 2550 Clinical App for Paramedic V 5th Semester 14 Hours 6th Semester 8 Hours EMSP 2320 Therapeutic Modalities of Med EMSP 2340 Theraputc Modalts/Spcl Patient EMSP 2510 Clinical App for Paramedic I EMSP 2520 Clinical App for Paramedic II EMSP 2560 Clinical App for Paramedic IV EMSP 2530 Clinical App for Paramedic III EMSP 2570 Clinicl Appl for Paramedic VII EMSP 2710 Field Internship for Paramedic EMSP 2720 Practical Applic for Paramedic 69 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Paramedicine Diploma Program PT12 The paramedicine diploma program prepares students to provide advanced emergency medical care for critical and emergent patients who access the emergency medical system. This individual possesses the complex knowledge and skills necessary to provide patient care and transportation. Paramedics function as part of a comprehensive EMS response, under medical oversight. Paramedics perform interventions with the basic and advanced equipment typically found on an ambulance. The paramedic is a link from the scene into the health care system. The paramedicine diploma program prepares students for employment in paramedic positions in today s health services field. The paramedic diploma program provides learning opportunities that introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, 253

156 EMERGENCY SERVICES EDUCATION PROGRAMS retention, and advancement. The program provides opportunities to upgrade present knowledge and skills from the EMT/EMT-I 1985/AEMT levels to a paramedic level. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians (NREMT) Paramedic certification examination and apply for licensure with the Georgia State Office of Emergency Medical Services and Trauma (SOEMST) as a paramedic. The program is approved by the Georgia Department of Community Health, Office of EMS and Trauma. The EMS program is accredited by the Commission on Accreditation of Allied Health Education Programs ( upon the recommendation of the Committee on Accreditation for Educational Programs for the Emergency Medical Services Profession ( Commission on Accreditation of Allied Health Education Programs 1361 Park Street Clearwater, FL (727) Paramedic students have additional opportunities to complete an associate degree built on the paramedic technology diploma program. (Program Length: 5 Semesters Minimum) Entrance Requirements In addition to the standard college entrance requirements, those applying to the paramedicine diploma program must hold current certification and/or licensure as an: EMT (with successful completion of AEMT coursework); EMT-Intermediate/1985; EMT Intermediate/99; or AEMT. Criminal background checks and drug screens will be required based on the requirements for participation in clinical experiences. Emergency Medical Services, hospital emergency departments, aeromedical transport, armed forces, industry, urgent care clinics, physicians offices, local fire and police service. (59 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 13 Hours ENGL 1010 Fundamentals of English I* EMSP 2110 Foundations of Paramedicine MATH 1012 Foundations of Mathematics* EMSP 2120 Appl of Pathophyslgy for Para ALHS 1011 Structure & Function of the Human Body * EMSP 2130 Adv Resuscitative Skills Para EMSP 2140 Adv Cardiovascular Concepts 3rd Semester 9 Hours 4th Semester 14 Hours EMSP 2310 Therapeutic Modalities of Card EMSP 2320 Therapeutic Modalities of Med EMSP 2330 Therapeutic Modalites Trauma EMSP 2340 Theraputc Modalts/Spcl Patient EMSP 2540 Clinical App for Paramedic IV EMSP 2510 Clinical App for Paramedic I EMSP 2550 Clinical App for Paramedic V EMSP 2520 Clinical App for Paramedic II EMSP 2560 Clinical App for Paramedic IV 254

157 EMERGENCY SERVICES EDUCATION PROGRAMS 5th Semester 8 Hours EMSP 2530 Clinical App for Paramedic III EMSP 2570 Clinicl Appl for Paramedic VII EMSP 2710 Field Internship for Paramedic EMSP 2720 Practical Applic for Paramedic 59 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION EMS Professions Diploma Program EP12 Students who complete the EMS professions diploma will be able to fluidly move into the paramedicine program at the diploma level. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians AEMT certification examination and to apply for Georgia licensure as an AEMT. The primary focus of the advanced emergency medical technician is to provide basic and limited advanced emergency medical care and transportation for critical and emergent patients who access the emergency medical system. This individual possesses the basic knowledge and skills necessary to provide patient care and transportation. Advanced emergency medical technicians function as part of a comprehensive EMS response, under medical oversight. Advanced emergency medical technicians perform interventions with the basic and advanced equipment typically found on an ambulance. The advanced emergency medical technician is a link from the scene to the emergency health care system. The program is approved by the Georgia Department of Community Health, Office of EMS and Trauma. (Program Length: 3 Semesters Minimum) Entrance Requirements Criminal background checks and drug screens are required based on the requirements for participation in clinical experiences. Prerequisites must be completed by the program deadline. (ALHS 1011, ALHS 1090, ENGL 1010, MATH 1012) Emergency Medical Services, hospital emergency departments, Armed Forces, industry, urgent care clinics, physicians offices, local fire and police services. 255

158 EMERGENCY SERVICES EDUCATION PROGRAMS (41 CREDIT HOURS) 1st Semester 15 Hours 2nd Semester 13 Hours ALHS 1011 Structure & Function of the Human Body * ALHS 1090 MedTerm/Allied Health Sciences* ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics 3rd Semester 13 Hours EMSP 1510 Advanced Concepts for the AEMT** EMSP 1520 Adv Patient Care for the AEMT** EMSP 1530 Clinical Applications for AEMT** EMSP 1540 Clincl & Practicl Appl for AEMT** EMSP 1110 Intro to the EMT Profession EMSP 1120 EMT Assessment/Airwy Mgt & Pharm EMSP 1130 Medical Emergencies for EMT EMSP 1140 Special Patient Populations EMSP 1150 Shock and Trauma for the EMT EMSP 1160 Clinical & Practical Appl for EMT 41 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Students must complete all prerequisite courses prior to the admission. Emergency Medical Responder - EMR EB71 The emergency medical responder certificate program prepares students to initiate immediate lifesaving care to critical patients who access the emergency medical system. This individual possesses the basic knowledge and skills necessary to provide lifesaving interventions while awaiting additional EMS response and to assist higher level personnel at the scene and during transport. Emergency medical responders function as part of a comprehensive EMS response, under medical oversight. The emergency medical responder (EMR) technical certificate of credit provides students with the opportunity to prepare for entry-level into the emergency medical services professions for possible employment in a variety of pre-hospital, industrial and first responder settings. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) First Responder agencies (police or fire services), Armed Forces, or industry. 256

159 EMERGENCY SERVICES EDUCATION PROGRAMS (11 CREDIT HOURS) 1st Semester 7 Hours 2nd Semester 4 Hours ALHS 1011 Structure & Function of the Human Body ALHS 1090 MedTerm/Allied Health Sciences EMSP 1010 Emergency Medical Responder 11 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Emergency Medical Technician EMJ1 The emergency medical technician certificate program prepares students to provide basic emergency medical care and transportation for critical and emergent patients who access the emergency medical system. This individual possesses the basic knowledge and skills necessary to provide patient care and transportation. Emergency medical technicians function as part of a comprehensive EMS response, under medical oversight. Emergency medical technicians perform interventions with the basic equipment typically found on an ambulance. The emergency medical technician is a link from the scene to the emergency healthcare system. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians EMT certification examination and apply for Georgia licensure as an EMT. The program is approved by the Georgia Department of Community Health, Office of EMS and Trauma (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the EMS profession diploma. The emergency medical technician certificate is imbedded into the EMS profession diploma. Entrance Requirements Criminal background checks and drug screens are required based on the requirements for participation in clinical experiences. Emergency Medical Services, hospital emergency departments, Armed Forces, industry, urgent care clinics, physicians offices, local fire and police services. 257

160 EMERGENCY SERVICES EDUCATION PROGRAMS (23 CREDIT HOURS) 1st Semester- Prerequisites 7 Hours 2nd Semester 16 Hours ALHS 1011 Structure & Function of the Human Body * ALHS 1090 MedTerm/Allied Health Sciences* EMSP 1110 Intro to the EMT Profession EMSP 1120 EMT Assessment/Airwy Mgt&Pharm EMSP 1130 Medical Emergencies for EMT EMSP 1140 Special Patient Populations EMSP 1150 Shock and Trauma for the EMT EMSP 1160 Clinical&Practicl Appl for EMT 23 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION * Students must complete prerequisite courses prior to the admission. Advanced Emergency Medical Technician (AEMT) EMH1 The advanced emergency medical technician certificate program prepares students to provide basic and limited advanced emergency medical care and transportation for critical and emergent patients who access the emergency medical system. This individual possesses the basic knowledge and skills necessary to provide patient care and transportation. Advanced emergency medical technicians function as part of a comprehensive EMS response, under medical oversight. Advanced emergency medical technicians perform interventions with the basic and advanced equipment typically found on an ambulance. The advanced emergency medical technician is a link from the scene to the emergency health care system. Successful completion of the program allows the graduate to take the National Registry of Emergency Medical Technicians AEMT certification examination and apply for Georgia licensure as an AEMT. The program is approved by the Georgia Department of Community Health, Office of EMS and Trauma. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Students applying for this program must be accepted into the EMS professions diploma. The advanced emergency medical technician certificate is imbedded into the EMS professions diploma. Entrance Requirements Submit documentation of current certification and/or licensure as an: EMT or EMT-Basic (with successful completion of Georgia State Office of Emergency Medical Services and Trauma (SOEMST) EMT-B to EMT update course); or proof of successful completion of EMSP 1110, EMSP 1120, EMSP 1130, EMSP 1140, EMSP 1150, AND EMSP Criminal background checks and drug screens are required based on the requirements for participation in clinical experiences. 258

161 EMERGENCY SERVICES EDUCATION PROGRAMS Emergency Medical Services, hospital emergency departments, Armed Forces, industry, urgent care clinics, physicians offices, local fire and police services. (17 CREDIT HOURS) 1st Semester 7 Hours 2nd Semester 10 Hours ALHS 1011 Structure & Function of the Human Body ALHS 1090 Med Term/Allied Health Sciences EMSP 1510 Advanced Concepts for the AEMT EMSP 1520 Adv Patient Care for the AEMT EMSP 1530 Clinical Applications for the AEMT EMSP 1540 Clinical & Practical App for AEMT 17 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Students must complete prerequisite courses prior to the admission. Applicants for this program must submit documentation of current Georgia EMT License, OR National Registry of EMT s certification as an EMT or EMT-Basic before open registration begins. 259

162 VETERINARY TECHNOLOGY PROGRAMS Veterinary Technology Associate of Applied Science Degree VT23 The veterinary technology degree is a sequence of courses designed to prepare students for careers in the field of veterinary technology. Learning opportunities develop academic and professional knowledge and skills for job acquisition, retention, and advancement. Program graduates are to be competent in the general areas of humanities or fine arts, social or behavioral sciences, and natural sciences or mathematics. In addition, the program emphasizes specialized training in animal health care. Program graduates receive a veterinary technology associate of applied science degree and are eligible to sit for the Veterinary Technician National Examination to become qualified as registered veterinary technicians in the state of Georgia. The Gwinnett Technical College veterinary technology program is fully accredited by the American Veterinary Medical Association (AVMA) as a program for educating veterinary technicians. This program is only offered full-time, during the day. (Program Length: 5 Semesters Minimum plus required core prerequisites) Prerequisites Length of time to complete prerequisites varies depending on applicants transfer credit and/or testing results. The time to complete prerequisites is not including in the total program lengths listed. It is the student s responsibility to notify the admissions office once pre-requisites have been completed. File completion does not guarantee an interview or acceptance. Prerequisites must be completed by deadline. (ENGL 1101; FYES 1000; BIOL 1111 and BIOL 1111L; CHEM 1211 and CHEM 1211 L; MATH 1111 or MATH 1101 and one course from Area II and one course from Area IV. Veterinary technician, positions in small and large animal practice, zoos, research, veterinary product sales and development and academia (57 CREDIT HOURS) 1st Semester 7 Hours 2nd Semester 17 Hours VETT 1000 Veterinary Medical Terminology VETT 1010 Intro to Veterinary Tech VETT 1060 Animal Anatomy and Physiology VETT 1020 Veterinary Clinic Pathology I VETT 1030 Veterinary Clinical Procedures I VETT 1110 Veterinary Pathology and Disease VETT 2220 Veterinary Practice Management VETT 1070 Veterinary Diagnostic Imaging 3rd Semester 9 Hours 4th Semester 12 Hours VETT 2120 Veterinary Clinical Pathology VETT 2130 Veterinary Clinical Procedures II 5th Semester VETT 2300 Veterinary Clinical Internship 12 Hours VETT 2160 Pharmacology for Vet Technicians VETT 2230 Veterinary Anesthslgy & Surg Procdrs VETT 2210 Lab & Exotic Anmls for Vet Techncns TOTAL CREDIT HOURS REQUIRED FOR GRADUATION

163 VETERINARY TECHNOLOGY PROGRAMS For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Veterinary Technician Assistant VA11 The veterinary technician assistant technical certificate provides educational opportunities to individuals that will enable them to obtain knowledge, skills, and attitudes necessary to succeed in an entry-level position in the field of veterinary assisting. Graduates are able to assist veterinarians and veterinary technicians in providing quality animal healthcare including obtaining and recording patient information, preparing patients, instruments and equipment for surgery; collecting samples and performing certain laboratory procedures; dressing wounds; assisting in diagnostic, medical, and surgical procedures; exposing and developing diagnostic radiographs; communicating with animal owners; and feeding and caring for animals. This program is not offered as a standalone program. This program is only offered full-time, during the day. Technical courses apply to the degree program in veterinary technology. (Program Length: 4 Semesters Minimum plus required core prerequisites) Students applying for this program must be accepted into the Veterinary Technology degree program. Veterinary assistant, animal healthcare assistant 1st Semester-Prerequisites MATH 1111 College Algebra BIOL 1111/L Biology I/Lab 7 Hours (28 CREDIT HOURS) 2nd Semester-Fall Admission to Program CHEM 1211/L Chemistry I/Lab 4 Hours 3rd Semester-Prerequisites 7 Hours 4th Semester-Spring 10 Hours VETT 1000 Veterinary Medical Terminology VETT 1010 Intro to Veterinary Tech VETT 1060 Animal Anatomy and Physiology VETT 1020 Veterinary Clinic Pathology I VETT 1030 Veterinary Clinical Procedure I VETT 1070 Veterinary Diagnostic Imaging 28 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. 261

164 CRIMINAL JUSTICE TECHNOLOGY PROGRAMS Criminal Justice Technology Associate of Applied Science Degree CJT3 The criminal justice technology associate degree is a sequence of courses that prepares students for criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Program graduates receive a criminal justice technology associate degree. Graduates who are current practitioners will benefit through enhancement of career potential. (Program Length: 5 Semesters Minimum) A criminal background check will be completed prior to the first day of the practicum or externship (CRJU 2090/ CRJU 2100) by most Criminal Justice agencies. Failure to complete and pass this criminal background check to the satisfaction of the internship site will prohibit the externship experience, thus, terminating the student from the program before graduation. Program director approval is required before registration of the practicum or externship (CRJU 2090/ CRJU 2100). Entry-level positions in corrections, security, investigative, and police administration fields (59 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 12 Hours ENGL 1101 Composition and Rhetoric General Education Area III - MATH 1111, MATH 1100, or MATH 1101 General Education Area II * CRJU 1010 Intro to Criminal Justice CRJU 1400 Ethic&Cultural Persp-Crim Just CRJU 1030 Corrections CRJU 2020 Constit Law/Criminal Justice 3rd Semester 12 Hours 4th Semester 12 Hours General Education Area IV * CRJU 1040 Principles of Law Enforcement CRJU 2050 Criminal Procedure CRJU 2070 Juvenile Justice SPCH 1101 Public Speaking CRJU 1068 Criminal Law for Criminal Just CRJU xxxx Elective CRJU xxxx Elective 262

165 CRIMINAL JUSTICE TECHNOLOGY PROGRAMS 5th Semester 12 Hours CRJU 2090 Criminal Justice Practicum or CRJU 2100 Criminal Justice Externship CRJU xxxx Elective CRJU xxxx Elective CRJU xxxx Elective 59 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any CRJU courses not required in program, ACCT 2155, BUSN 1100, CIST 1001, ENGL 1105, SOCI 1101, POLS 1101, MGMT 1100, MGMT 1110, MGMT 1115, PSYC 2103, PSYC 2250, EMSP For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Criminal Justice Technology Diploma Program CJT2 The criminal justice technology diploma is a sequence of courses that prepares students for criminal justice professions. Learning opportunities develop academic, occupational, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes a combination of criminal justice theory and practical application necessary for successful employment. Program graduates receive a criminal justice technology diploma. Graduates who are current practitioners will benefit through enhancement of career potential. Technical courses apply to the degree program in criminal justice technology. (Program Length: 4 Semesters Minimum) A criminal background check will be completed prior to the first day of the practicum or externship (CRJU 2090/CRJU 2100) by most Criminal Justice agencies. Failure to complete and pass this criminal background check to the satisfaction of the internship site will prohibit the externship experience, thus, terminating the student from the program before graduation. Program director approval is required before registration of the practicum or externship (CRJU 2090/CRJU 2100). Entry-level positions in corrections, security, investigative, and police administration fields 263

166 CRIMINAL JUSTICE TECHNOLOGY PROGRAMS (47 CREDIT HOURS) 1st Semester 11 Hours 2nd Semester 12 Hours ENGL 1010 Fundamentals of English I CRJU 1010 Intro to Criminal Justice CRJU 1400 Ethic&Cultural Persp-Crim Just MATH 1012 Foundations of Mathematics PSYC 1010 Basic Psychology CRJU 1030 Corrections CRJU 2020 Constit Law/Criminal Justice 3rd Semester 12 Hours 4th Semester 12 Hours CRJU 1040 Principles of Law Enforcement CRJU 1068 Criminal Law for Criminal Just CRJU 2050 Criminal Procedure CRJU 2070 Juvenile Justice CRJU 2090 Criminal Justice Practicum or CRJU 2100 Criminal Justice Externship CRJU xxxx Elective CRJU xxxx Elective CRJU xxxx Elective 47 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any CRJU courses not required in program. ACCT 2155, BUSN 1100, CIST 1001, ENGL 1105, SOCI 1101, POLS 1101, MGMT 1100, MGMT 1110, MGMT 1115, PSYC 2103, PSYC 2250, EMSP

167 HORTICULTURE PROGRAMS Environmental Horticulture Associate of Applied Science Degree EH13 The horticulture degree prepares students for careers in landscape design, installation, and management as well as tree care, small scale urban farming, greenhouse and nursery production, golf course management, floriculture, and interiorscaping. The program emphasizes a combination of horticulture theory and hands-on practical application necessary for successful employment. The program also prepares students to become certified by various green industry professional associations. Students may become a Georgia Certified Plant Professional (by the UGA Center for Urban Agriculture); a Georgia Certified Landscape Professional (by the UGA Center for Urban Agriculture); a Commercial Pesticide Applicator (by the Georgia Department of Agriculture); a Certified Arborist (by the International Society of Arboriculture); a Certified Professional Landscape Designer (by the Association of Professional Landscape Designers); or choose from many others. The associate of applied science degree program includes courses in horticulture and college-level general education courses. (Program Length: 5 Semesters Minimum) Note: Some courses in this program may be subject to a livework/supply reimbursement charge; specifically in the floral design curriculum. HORT 1720 and 1730 have a $150 supply fee. HORT 2249 has a $75 supply fee. Landscape contractor, landscape designer, floral designer, landscape manager, urban farmer, arborist, greenskeeper, groundskeeper, lawn service technician, nursery worker, greenhouse manager, garden center manager, interior landscaper, arborist, golf course superintendent GENERAL HORTICULTURE 8GH3 (59 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours HORT 1000 Horticulture Science HORT 1020 Herbaceous Plant Identif HORT xxxx Elective HORT 1010 Woody Ornamental Plant Identif HORT 1080 Pest Management HORT xxxx Elective General Education Area I ENGL 1101 General Education Area II * 3rd Semester 12 Hours 4th Semester 9 Hours HORT xxxx Elective HORT xxxx Elective HORT 1150 Environmental Hort Internship HORT xxxx Elective HORT xxxx Elective General Education Area IV * General Education Area III MATH 1111, MATH 1100, or MATH

168 HORTICULTURE PROGRAMS 5th Semester HORT xxxx Elective HORT xxxx Elective HORT xxxx Elective 12 Hours General Education Class (any Gen Ed Area) Elective(s): any HORT course not required for program completion; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended Elective(s): HORT 1040, HORT 1060, HORT 1120, HORT 1310, HORT 1410, HORT 1440, HORT 1690, HORT 1720 LANDSCAPE (59 CREDIT HOURS) 8L13 1st Semester 12 Hours 2nd Semester 12 Hours HORT 1000 Horticulture Science HORT 1020 Herbaceous Plant Identif HORT xxxx Elective HORT 1010 Woody Ornamental Plant Identif HORT 1080 Pest Management HORT 1120 Landscape Management General Education Area I ENGL 1101 General Education Area II * 3rd Semester 12 Hours 4th Semester 9 Hours HORT 1040 Landscape Installation HORT 1060 Landscape Design HORT 1150 Environmental Hort Internship HORT xxxx Elective HORT xxxx Elective General Education Area IV * General Education Area III MATH 1111, MATH 1100, or MATH th Semester HORT 1330 Turfgrass Management HORT 1310 Irrigation HORT xxxx Elective 12 Hours General Education Class (any Gen Ed Area) Elective(s): Any HORT course not required for program completion; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended Elective(s): HORT 1050, HORT 1160, HORT 1200, HORT 1410, HORT 1440, HORT 1500, HORT 1690, HORT

169 HORTICULTURE PROGRAMS FLORAL MANAGEMENT (59 CREDIT HOURS) 8FM3 1st Semester 12 Hours 2nd Semester 12 Hours HORT 1000 Horticulture Science HORT 1020 Herbaceous Plant Identif HORT 1720 Introductory Floral Design HORT 1010 Woody Ornamental Plant Identif HORT 1080 Pest Management HORT 1730 Advanced Floral Design General Education Area I ENGL 1101 General Education Area II * 3rd Semester 12 Hours 4th Semester 9 Hours HORT xxxx Elective HORT xxxx Elective HORT 1150 Environmental Hort Internship HORT xxxx Elective HORT xxxx Elective General Education Area IV * General Education Area III MATH 1111, MATH 1100, or MATH th Semester HORT 2249 Flower Shop Management HORT 1750 Interiorscaping HORT xxxx Elective 12 Hours General Education Class (any Gen Ed Area) 60 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Elective(s): any HORT course not required for program completion; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended Elective(s): HORT 1030, HORT 1060, HORT 1140, HORT 1430, HORT 1560, HORT 1680, HORT 1690 For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Environmental Horticulture Diploma Program EH12 The horticulture diploma prepares students to begin successful careers in horticulture. The program also prepares students to become certified by various green industry professional associations. Students may become a Georgia Certified Plant Professional (by the UGA Center for Urban Agriculture); a Georgia Certified Landscape Professional (by the UGA Center for Urban Agriculture); a Commercial Pesticide Applicator (by the Georgia Department of Agriculture); a Certified Arborist (by the International Society of Arboriculture); a Certified Professional Landscape Designer (by the 267

170 HORTICULTURE PROGRAMS Association of Professional Landscape Designers); or choose from many others. Technical courses apply to the degree program in environmental horticulture. (Program Length: 4 Semesters Minimum) Note: Some courses in this program may be subject to a livework/supply reimbursement charge; specifically in the floral design curriculum. HORT 1720 and 1730 have a $150 supply fee. HORT 2249 has a $75 supply fee. Landscape contractor, landscape designer, floral designer, landscape manager, urban farmer, arborist, greenskeeper, groundskeeper, lawn service technician, nursery worker, greenhouse manager, garden center manager, interior landscaper, arborist, golf course worker GENERAL HORTICULTURE 8GH2 (43 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours HORT 1000 Horticulture Science HORT 1020 Herbaceous Plant Identif HORT xxxx Elective ENGL 1010 Fundamentals of English I HORT 1010 Woody Ornamental Plant Identif HORT 1080 Pest Management HORT xxxx Elective MATH 1012 Foundations of Mathematics 3rd Semester 12 Hours 4th Semester 5 Hours HORT xxxx Elective HORT xxxx Elective HORT xxxx Elective HORT xxxx Elective HORT 1150 Environmental Hort Internship EMPL 1000 Interpersonal Relat & Prof Dev Elective(s): any HORT course not required for program completion; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended Elective(s): HORT 1040, HORT 1060, HORT 1120, HORT 1310, HORT 1410, HORT 1440, HORT 1690, HORT 1720 LANDSCAPE 8LM2 (43 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 12 Hours HORT 1000 Horticulture Science HORT 1010 Woody Ornamental Plant Identif HORT 1020 Herbaceous Plant Identif HORT 1080 Pest Management HORT 1060 Landscape Design HORT 1120 Landscape Management ENGL 1010 Fundamentals of English I MATH 1012 Foundations of Mathematics 3rd Semester 12 Hours 4th Semester 5 Hours HORT 1330 Turfgrass Management HORT 1150 Environmental Hort Internship HORT 1310 Irrigation EMPL 1000 Interpersonal Relat & Prof Dev HORT **** Elective HORT 1040 Landscape Installation 268

171 HORTICULTURE PROGRAMS Elective(s): Any HORT course not required for program completion; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended Elective(s): HORT 1050, HORT 1140, HORT 1060, HORT 1200, HORT 1410, HORT 1440, HORT 1500, HORT 1690, HORT 1720 FLORAL MANAGEMENT (43 CREDIT HOURS) 8FM2 1st Semester 12 Hours 2nd Semester 12 Hours HORT 1000 Horticulture Science HORT 1020 Herbaceous Plant Identif HORT 1720 Introductory Floral Design ENGL 1010 Fundamentals of English I HORT 1010 Woody Ornamental Plant Identif HORT 1080 Pest Management HORT 1730 Advanced Floral Design MATH 1012 Foundations of Mathematics 3rd Semester 12 Hours 4th Semester 5 Hours HORT 2249 Flower Shop Management HORT 1750 Interiorscaping HORT **** Elective HORT **** Elective HORT 1150 Environmental Hort Internship EMPL 1000 Interpersonal Relations & Prof Dev 43 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Elective(s): Any HORT course not required for program completion; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended Elective(s): HORT 1030, HORT 1060, HORT 1140, HORT 1430, HORT 1560, HORT 1680, HORT Floral Designer FD11 The floral designer certificate is designed for students who want to move quickly towards a floral career. Students learn basic design skills and the correct use of floral supplies and equipment. Students also become familiar with wedding and event planning as well as how to profitably run a floral business. Technical courses apply to the degree or diploma program in environmental horticulture. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 3 Semesters Minimum) Note: Most courses in this program are subject to a livework/supply reimbursement charge. HORT 1720 and 1730 have a $150 supply fee. HORT 2249 has a $75 supply fee. This certificate does not have enough credit hours to qualify for financial aid. 269

172 HORTICULTURE PROGRAMS Floral designer, event planner, interior plant specialist, floral shop manager (12 CREDIT HOURS) 1st Semester 3 Hours 2nd Semester 6 Hours HORT 1720 Introductory Floral Design 3rd Semester HORT 2249 Flower Shop Management 3 Hours HORT 1730 Advanced Floral Design HORT XXXX Elective or HORT 1150 Envrnmntl Horticulture Internship 12 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any HORT course not required for program completion; HRTM 1150, INDS Recommended Elective(s): HORT 1150 GIS Technology GT41 This program provides students with a basic knowledge of the Geographic Information Systems (GIS) and Global Positioning Systems (GPS). Students will learn project management and will be able to effectively use microcomputer hardware and software applications to enhance existing job skills in the GIS and GPS profession. (Program Length: 2 Semesters Minimum) Surveyors, cartographers, photogrammetrists, surveying and mapping technicians (16 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 8 Hours GIFS 1101 Intro Geographic Informatn Systm (4) GIFS 1109 Special Topics in GIS (4) GIFS 1103 Intermediate GIS (4) GIFS 1122 GIS in Sci, Bus,Gov (4) 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Suggested sequence of classes. Student may have to make modifications due to developmental courses and/or course availability. Refer to college catalog for course descriptions and course prerequisites. 270

173 Landscape Installation Technician HI11 HORTICULTURE PROGRAMS The landscape installation technician certificate prepares students for career opportunities in the landscape industry, one of the fastest-growing areas of horticulture with tremendous growth potential. Students will receive hands-on instruction in the identification of commonly used plant material as well as instruction in how to grow, establish and maintain plants in the landscape environment. Courses will help students become aware of the business side of landscaping as well as the scientific theory behind standard industry practices. This program provides courses that will produce a well-rounded landscape professional with a solid background in plant and hardscape installation and management. Technical courses apply to the degree or diploma program in environmental horticulture. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) Landscape manager, landscape contractor, landscape technician, hardscape installer (16 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 9 Hours HORT 1020 Herbaceous Plant Identif HORT 1160 Landscape Contracting HORT 1440 Landscape Grading and Drainage HORT 1010 Woody Ornamental Plant Identif HORT 1040 Landscape Installation 16 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Suggested sequence of classes. Student may have to make modifications due to developmental courses and/or course availability. Refer to college catalog for course descriptions and course prerequisites. Landscape Design Technician LDT1 The landscape design technician certificate provides a concentrated curriculum in landscape design. Students receive instruction in the theory of landscape design as well as in practical application of design principles. Graphics using hand and computer resources will also be emphasized. Technical courses apply to the degree or diploma program in environmental horticulture. (Program Length: 2 Semesters Minimum) Self-employed landscape designer, sales, marketing, landscape architect assistant, designer for 271

174 HORTICULTURE PROGRAMS garden centers or landscaping firms (18 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 9 Hours HORT 1020 Herbaceous Plant Identif HORT 1060 Landscape Design HORT 1040 Landscape Installation HORT 1010 Woody Ornamental Plant Identif HORT 1430 Advanced Landscape Design HORT 1560 Computer-Aided Landscape Design 18 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Suggested sequence of classes. Student may have to make modifications due to developmental courses and/or course availability. Refer to college catalog for course descriptions and course prerequisites. Sustainable Urban Agriculture Technician SUA1 The program prepares the student for a career in sustainable, small scale food production that integrates economic profitability and environmental stewardship. Courses provide hands-on experience in the fundamentals of plant production and marketing, giving the student a complete knowledge of the sustainable farmer s market system. (Program Length: 2 Semesters Minimum) Market Farmer, Agri-tourism Farmer, Farmer s Market Director, Community Garden Manager/ Organizer, kitchen garden designer/specialist, CSA operator/farmer, Eco-landscaper (sustainable/ organic landscape specialist) (18 CREDIT HOURS) 1st Semester 9 Hours 2nd Semester 9 Hours HORT 1100 Introduction to Sustainable Ag HORT 1140 Horticulture Business Management HORT 1410 Soils HORT 1080 Pest Management HORT 1110 Small Scale Food Production HORT xxxx Elective 18 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): any HORT course not already in the program; EMSP 1010, HRTM 1150, INDS 1100, MGMT 1100, MKTG 1100, MKTG Recommended electives: HORT 1030, HORT 1310, HORT 1440, HORT 1500, HORT 1690, HORT 1700, HORT

175 WELDING AND JOINING TECHNOLOGY PROGRAMS Welding and Joining Technology Diploma Program WAJ2 The welding and joining technology diploma is designed to prepare students for careers in the welding industry. Program learning opportunities develop academic, technical, and professional knowledge and skills required for job acquisition, retention, and advancement. The program emphasizes welding theory and practical application necessary for successful employment. Program graduates receive a welding and joining technology diploma, have the qualifications of a welding and joining technician, and are prepared to take qualification tests. (Program Length: 3 Semesters Minimum) Welder s helper, shielded metal arc welder, TIG welder, MIG welder, combination welder Some courses in this program of study may be subject to a livework and/or supply reimbursement charge. DAY GROUP (49 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 17 Hours WELD 1000 Intro to Welding Technology WELD 1030 Blueprint Reading WELD 1010 Oxy-fuel Cutting WELD 1060 Vertical Shield Metal Arc Weld WELD 1040 Flat Shielded Metal Arc Weld WELD 1070 Overhead Shield Metal Arc Weld WELD 1050 Horizon Shielded Metal Arc Weld WELD 1090 Gas Metal Arc Welding MATH 1012 Foundations of Mathematics ENGL 1010 Fundamentals of English I 3rd Semester 12 Hours WELD 1110 Gas Tungsten Arc Welding WELD 1120 Preparation/Industrial Qualifi WELD xxxx Elective EMPL 1000 Interpersonal Relations & Prof Dev NIGHT GROUP (49 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 11 Hours WELD 1000 Intro to Welding Technology WELD 1050 Horizon Shielded Metal ArcWeld WELD 1010 Oxfuel Cutting WELD 1060 Vert Shielded Metal Arc Weld WELD 1040 Flat Shielded Metal Arc Weld MATH 1012 Foundations of Mathematics 273

176 WELDING AND JOINING TECHNOLOGY PROGRAMS 3rd Semester 9 Hours 4th Semester 11 Hours WELD 1070 Overhead Shield Metal Arc Weld WELD 1030 Blueprint Read/Welding Tech EMPL 1000 Interpersonal Relat & Prof Dev 5th Semester 6 Hours WELD xxxx Elective WELD 1120 Preparation/Industrial Qualifi WELD 1090 Gas Metal Arc Welding WELD 1110 Gas Tungsten Arc Welding ENGL 1010 Fundamentals of English I 49 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Elective(s): WELD 1150, WELD 1151, WELD 1152, WELD 1153, WELD 1154, WELD 1156, WELD 1330, and/or WELD Flux Cored Arc Welder FC61 The flux cored arc welder certificate provides basic training required for the flux cored arc welder. This certificate includes courses in flux cored arc welding. Students receive instruction that emphasizes basic skills, safety, and quality workmanship. The program is ideal for the person who needs training in a basic welding operation in a brief time span. All courses apply to the diploma program in welding and joining technology. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) The program emphasizes basic skills, safety, and quality workmanship. Welder s helper, flux cored arc welder DAY GROUP 1st Semester WELD 1000 Intro to Welding Technology WELD 1010 Oxyfuel Cutting WELD 1153 Flux Cored Arc Welding WELD xxxx Elective (13 CREDIT HOURS) 13 Hours 274

177 WELDING AND JOINING TECHNOLOGY PROGRAMS NIGHT GROUP (13 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 3 Hours WELD 1000 Intro to Welding Technology WELD xxxx Elective WELD 1010 Oxyfuel Cutting WELD 1153 Flux Cored Arc Welding 13 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Gas Metal Arc Welder GM31 The gas metal arc welder certificate provides basic training required for the gas metal arc welder (MIG). This certificate includes courses in gas metal arc welding (MIG). Students receive instruction that emphasizes basic skills, safety, and quality workmanship. The program is ideal for the person who needs training in a basic welding operation in a brief time span. All courses apply to the diploma program in welding and joining technology. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) The program emphasizes basic skills, safety, and quality workmanship. Welder s helper, MIG welder DAY GROUP (13 CREDIT HOURS) 1st Semester WELD 1000 Intro to Welding Technology WELD 1010 Oxyfuel Cutting WELD 1090 Gas Metal Arc Welding WELD xxxx Elective 13 Hours NIGHT GROUP (13 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 3 Hours WELD 1000 Intro to Welding Technology WELD xxxx Elective WELD 1010 Oxyfuel Cutting WELD 1090 Gas Metal Arc Welding 64 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): WELD 1030, WELD 1153, WELD

178 WELDING AND JOINING TECHNOLOGY PROGRAMS Gas Tungsten Arc Welder GTA1 The gas tungsten arc welder certificate provides basic training required for the gas tungsten arc welder (TIG). Students receive instruction that emphasizes basic skills, safety, and quality workmanship. The program is ideal for the person who needs training in a basic welding operation in a brief time span. Technical courses apply to the diploma program in welding and joining technology. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 1 Semester Minimum) The program emphasizes basic skills, safety, and quality workmanship. Welder s helper, TIG welder DAY GROUP 1st Semester WELD 1000 Intro to Welding Technology WELD 1010 Oxyfuel Cutting WELD 1110 Gas Tungsten Arc Welding WELD xxxx Elective (13 CREDIT HOURS) 13 Hours Elective(s): WELD 1030, WELD 1153, WELD 1154, WELD 1150 NIGHT GROUP (13 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 3 Hours WELD 1000 Intro to Welding Technology WELD xxxx Elective WELD 1010 Oxyfuel Cutting WELD 1110 Gas Tungsten Arc Welding 13 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 276

179 WELDING AND JOINING TECHNOLOGY PROGRAMS Advanced Shielded Metal Arc Welder OSM1 The overhead shielded metal arc welder certificate provides basic training required for the electric arc welder. Students receive instruction that emphasizes basic skills, safety, and quality workmanship. The program is ideal for the person who needs training in a basic welding operation in a brief time span. Technical courses apply to the diploma program in welding and joining technology. This certificate does not qualify for financial aid as it does not meet minimum hour requirements. (Program Length: 2 Semesters Minimum) The program emphasizes basic skills, safety, and quality workmanship. Students must complete prerequisites for this program: WELD 1000, WELD 1010 and WELD Welder s helper, shielded metal arc welder (stick or electric arc welder) DAY GROUP (21 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 8 Hours WELD 1000 Intro to Welding Technology WELD 1060 Vert Shielded Metal Arc Weld WELD 1010 Oxyfuel Cutting WELD 1070 Overhead Shield Metal Arc Weld WELD 1040 Flat Shielded Metal Arc Weld WELD 1050 Horizon Shielded Metal Arc Weld NIGHT GROUP (21 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 7 Hours WELD 1000 Intro to Welding Technology WELD 1050 Horizon Shielded Metal Arc Weld WELD 1010 Oxyfuel Cutting WELD 1060 Vert Shielded Metal Arc Weld WELD 1040 Flat Shielded Metal Arc Weld 3rd Semester 4 Hours WELD 1070 Overhead Shield Metal Arc Weld 21 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 277

180 PHOTOGRAPHY PROGRAMS Photography Associate of Applied Science Degree CP13 The photography associate degree program prepares students for employment in the diverse and growing field of photography. The photography associate degree program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of photography. Graduates of the program receive a Photography associate degree. The associate of applied science degree program includes photography courses and college-level general education courses. This program is only offered full-time, during the day. (Program Length: 6 Semesters Minimum) Note: Some courses in this program may be subject to a livework/supply reimbursement charge. Photographer s assistant, freelance photographer, photojournalist, commercial photographer, portrait photographer, digital print finisher, photo technician, digital imaging artist (69 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 11 Hours PHOT 1102 Visual Theory I PHOT 1103 Camera Techniques I PHOT 1104 Photographic Workshop I PHOT 1105 Digital Imaging I PHOT 1122 Visual Theory II PHOT 1123 Camera Techniques II PHOT 1125 Multimedia I 3rd Semester 12 Hours 4th Semester 11 Hours PHOT 2105 Digital Imaging II PHOT 2103 Commercial I PHOT 1126 Portraiture I General Education Area III MATH 1111, MATH 1100, or MATH 1101 PHOT 2106 Photojournalism PHOT 2126 Portraiture II PHOT 2125 Multimedia II General Education Area I ENGL

181 PHOTOGRAPHY PROGRAMS 5th Semester 14 Hours 6th Semester 9 Hours PHOT 2101 Portfolio I PHOT 2123 Commercial II PHOT 2122 Practicum/Internship General Education Area IV * General Education Area II * PHOT 2131 Photographic Business Mgmnt PHOT 2121 Portfolio II PHOT 1124 Photographic Workshop II General Education Class (any Gen Ed Area) 69 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Photography Diploma Program CP14 The photography program prepares students for employment in the diverse and growing field of photography. The photography program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of commercial photography. Graduates of the program receive a photography diploma which qualifies them as photographers with a specialization in portraiture photography, or advertising photography. The diploma program includes photography courses and diploma-level general education courses. This program is only offered full-time, during the day. (Program Length: 6 Semesters Minimum) Note: Some courses in this program may be subject to a livework/supply reimbursement charge. Photographer s assistant, freelance photographer, photojournalist, commercial photographer, portrait photographer, digital print finisher, photo technician, digital imaging artist (57 CREDIT HOURS) 1st Semester 12 Hours 2nd Semester 11 Hours PHOT 1102 Visual Theory I PHOT 1122 Visual Theory II PHOT 1103 Camera Techniques I PHOT 1123 Camera Techniques II PHOT 1104 Photographic Workshop I PHOT 1125 Multimedia I PHOT 1105 Digital Imaging I 279

182 PHOTOGRAPHY PROGRAMS 3rd Semester 9 Hours 4th Semester 9 Hours PHOT 2103 Commercial I PHOT 1126 Portraiture I MATH 1012 Foundations of Mathematics PHOT 2106 Photojournalism PHOT 2126 Portraiture II ENGL 1010 Fundamentals of English I 5th Semester 8 Hours 6th Semester 8 Hours PHOT 2101 Portfolio I PHOT 2123 Commercial II PHOT 2122 Practicum/Internship PHOT 2131 Photographic Business Mgmnt PHOT 2121 Portfolio II EMPL 1000 Interpersonal Relat & Prof Dev PHOT 1124 Photographic Workshop II 58 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION The First Year Experience course (FYES 1000) is required for students entering in this program with less than 30 semester hours of college credit. Digital Imaging Specialist DIA1 The digital imaging specialist certificate will provide a rich multidisciplinary environment for interactive digital media instruction, research and practice. The program focuses on the creative potential of each participant and fosters exceptional opportunities for innovative, interdisciplinary exploration of digital imaging. The broad curriculum features concentrations in foundations in design and technology, structured multimedia, photography, CDROM/DVD production, and web development. (Program Length: 4 Semesters Minimum) Photographic technician, digital imaging artist, presentation specialist, multimedia production artist, interactive multimedia designer (16 CREDIT HOURS) 1st Semester 8 Hours 2nd Semester 3 Hours PHOT 1103 Camera Techniques I PHOT 1125 Multimedia I PHOT 1105 Digital Imaging I 3rd Semester 3 Hours 4th Semester 2 Hours PHOT 2105 Digital Imaging II PHOT 2125 Multimedia II TOTAL CREDIT HOURS REQUIRED FOR GRADUATION

183 INTERIORS PROGRAMS Interiors Associate of Applied Science Degree IN13 The interiors program is designed to prepare students for employment in a variety of positions in today s interiors field. The interiors program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The knowledge and skills emphasized in this program include nontextile and textile use, materials usage; basic blueprint reading; codes, building systems; use of computers in drafting; communication with architects, contractors and clients; historical perspective of architecture; interior design fundamentals; selection and use of furniture and interior finishes; client presentations and business principles. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of interiors. Required core classes give students a well-balanced foundation of English and math which allows students to expand their knowledge of humanities, literature, and art. Electives allow the student to specialize according to career goals. Graduates of the program receive an interiors degree. (Program Length: 4 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Residential, commercial decorator/designer, independent or retail decorator/designer, project coordinator, showroom manager, visual merchandiser, sales representative (68 CREDIT HOURS) 1st Semester 16 Hours 2nd Semester 19 Hours General Education Area I ENGL 1101 General Education Area III MATH 1111, MATH 1100 or MATH 1101 INDS 1100 Interior Design Fundamentals INDS 1115 Technical Drawing INDS 1130 Materials and Resources INDS 1145 CAD Fund for Interior Design INDS 1150 History Interiors & Architech I INDS 1135 Textiles for Interiors INDS 1125 Lighting Tech for Interiors General Ed Area II PSYC 1101 or SOCI 1101 * 3rd Semester 16 Hours 4th Semester 17 Hours INDS 1120 Codes & Build Systems/Interiors INDS 1155 History Interiors & Architect II INDS 2210 Design Studio I INDS 2215 Design Studio II General Education Area IV HUMN 1101 or ARTS 1101 * INDS 1170 Interiors Internship INDS 1160 Interiors Seminar INDS 2230 Design Studio III INDS 2240 Business Practices Design Prof General Education Class (any Gen Ed Area) 69 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 281

184 INTERIORS PROGRAMS For the general educational courses noted with an (*), students can select from classes listed on pages All associate s degree students are required to take a minimum of 15 general educational course credits. A minimum of one course must be selected from course Area I, Area II, Area III and Area IV. Interiors Diploma Program IN12 The interiors program is designed to prepare students for employment in a variety of positions in today s interiors field. The interiors program provides learning opportunities which introduce, develop, and reinforce academic and occupational knowledge, skills, and attitudes required for job acquisition, retention, and advancement. The knowledge and skills emphasized in this program include nontextile and textile use, materials usage; basic blueprint reading; codes, building systems; use of computers in drafting; communication with architects, contractors and clients; historical perspective of architecture; interior design fundamentals; selection and use of furniture and interior finishes; client presentations and business principles. Additionally, the program provides opportunities to upgrade present knowledge and skills or to retrain in the area of interiors. Required core classes give students a well-balanced foundation of English and math and allow students to expand their knowledge of humanities, literature, and art. Electives allow the student to specialize according to career goals. Graduates of the program receive an interiors diploma. (Program Length: 4 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Residential, commercial decorator/designer, independent or retail decorator/designer, project coordinator, showroom manager, visual merchandiser, sales representative 282 (59 CREDIT HOURS) 1st Semester 16 Hours 2nd Semester 16 Hours MATH 1012 Foundations of Mathematics INDS 1100 Interior Design Fundamentals INDS 1115 Tech Drawing/Interior Designer INDS 1120 Codes & Build Systems/Interiors INDS 1145 CAD Fund for Interior Design INDS 1130 Materials and Resources INDS 1150 History Interiors & Architect I INDS 1125 Lighting Tech for Interiors INDS 1135 Textiles for Interiors 3rd Semester 13 Hours 4th Semester 14 Hours INDS 1155 History Interiors & Architect II INDS 2210 Design Studio I INDS 2215 Design Studio II ENGL 1010 Fundamentals of English I INDS 2230 Design Studio III INDS 2240 Business Practices Design Prof INDS 1160 Interiors Seminar EMPL 1000 Interpersonal Relations & Prof Dev or PSYC 1010 Basic Psychology 60 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION

185 INTERIORS PROGRAMS Interior Design Assistant ID11 The interior design assistant is a program in the applied visual arts that prepares individuals to apply artistic principles and techniques to the professional planning, designing, equipping, and furnishing of residential and commercial interior spaces. Technical courses apply to the degree or diploma program in interiors. (Program Length: 2 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Assistant designer in retail and residential employment, visual merchandising, retail home furnishing sales, showroom sales (25 CREDIT HOURS) 1st Semester 14 Hours 2nd Semester 11 Hours INDS 1125 Lighting Tech for Interiors INDS 1100 Interior Design Fundamentals INDS 1130 Materials and Resources INDS 1115 Tech Drawing/Interior Designer INDS 1135 Textiles for Interiors INDS 1120 Codes & Build Systems/Interiors INDS XXXX Elective (3 credits) 25 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Elective(s): Elective choices include any INDS course not required for program completion. Interior Design Sales Consultant ID31 The interiors design sales consultant is a certificate program highlighting the unique skill set required to identify the needs of a customer and provide an opportunity for those needs to be met through the purchase of a product or service. Students learn how to maintain customer relations, to achieve sales goals, and to market products and services as required for the professional planning and designing of residential and commercial interior spaces. (Program Length: 2 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Assistant designer in retail and residential employment, visual merchandising, retail home furnishing sales, showroom sales 283

186 INTERIORS PROGRAMS (24 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 14 Hours INDS 1100 Interior Design Fundamentals INDS 1150 History of Interiors and Architecture I INDS 1135 Textiles for Interiors INDS 1155 History of Interiors and Architecture II INDS 1130 Materials and Resources Elective 24 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION Interior Design and Color Consultant ID21 The interiors design and color consultant is a certificate program in the applied visual arts that prepares individuals to identify the design and color needs of a client. (Program Length: 2 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Assistant designer in retail and residential employment, visual merchandising, retail home furnishing sales, showroom sales (19 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 9 Hours INDS 1100 Interior Design Fundamentals INDS 1115 Technical Drawing for Interior Designers INDS 1125 Lighting Technologies for Interiors INDS 1130 INDS Materials and Resources INDS 1135 Textiles for Interiors 20 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 284

187 INTERIORS PROGRAMS Interior Technology IT31 The interiors technology certificate is a program in the applied visual arts that prepares individuals to apply technical skills and techniques to the professional planning and designing, of residential and commercial interior spaces. (Program Length: 2 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Assistant designer in retail and residential employment, visual merchandising, retail home furnishing sales, showroom sales (15 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 6 Hours INDS 1100 Interior Design Fundamentals MATH 1012 or 1100 or 1101 or 1111 INDS 1115 Technical Drawing for Interiors INDS 1145 CAD Fundamentals for Interior Design INDS 2210 Design Studio I 15 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 285

188 INTERIORS PROGRAMS Faux and Decorative Painting FAP1 The faux & decorative painting certificate prepares students to produce a wide variety of finishes such as marble, wood grain, semi-precious stones, and antiquing and pickling through paint application. Students will also be trained in interior design principles and have exposure to the basics of business operation. (Program Length: 2 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Application of painted and faux finishes (14 CREDIT HOURS) 1st Semester 10 Hours 2nd Semester 4 Hours INDS 1110 Faux & Decorative Painting II INDS 1100 Interior Design Fundamentals INDS 1105 Faux & Decorative Painting I 14 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 286

189 INTERIORS PROGRAMS Kitchen and Bath Designer KAB1 The kitchen & bath designer certificate is a program in the applied visual arts that prepares graduates for employment in the kitchen and bath industry. The kitchen & bath designer certificate provides learning opportunities in knowledge, skills and attitudes necessary for working in this specialized design area. Students will learn presentation standards, construction and mechanical systems, basics of kitchen and bath design, materials, lighting, universal and theme design applications, software technology, and business practices. Industry internships are required in the kitchen and bath field. The kitchen & bath designer certificate emphasizes a combination of kitchen and bath design theory and practical application necessary for successful employment and those seeking their certification in kitchen and bath design. Certified Kitchen Designers (CKD) and/or Certified Bath Designers (CBD) will qualify to take exam(s) following completion of this program and the required years of industry experience. (Program Length: 4 Semesters Minimum) Note: Technical courses in this program are subject to a livework/supply reimbursement charge. Students must complete FYES 1000 and all developmental requirements prior to entry. Individuals may enroll with or without prior experience in the kitchen or bath field. Similar courses can be transferred in from other institutions upon agreement with the program director. INDS 1145 requires completion of MATH 1012, MATH 1100, MATH 1111 or equivalent as a prerequisite. Independent kitchen and bath designer, retail kitchen and bath designer, retail kitchen and bath dealer/owner, supplier/manufacturer display designer, custom build/installer, coordinator or project manager, showroom representative, marketing, sales or sales representative (38 CREDIT HOURS) 1st Semester 13 Hours 2nd Semester 8 Hours INDS 2510 Kitchen & Bath Solutions Technlg INDS 1115 Tech Drawing/Interior Designer INDS 1130 Materials and Resources INDS 2500 Basic Resident Kitchen & Bath Des INDS 1120 Codes & Build Systems/Interiors 3rd Semester 4 Hours 4th Semester 13 Hours INDS 2505 Advanced Kitchen & Bath Design INDS 2515 Kitchen & Bath Studio INDS 2240 Business Practices Design Prof INDS 1175 Kitchen & Bath Internship 38 TOTAL CREDIT HOURS REQUIRED FOR GRADUATION 287