3M Telecommunications. Solutions for Networks. Solutions for. Optical Fibre. Telecommunications. Networks. Product Catalogue

Transcription

1 3M Telecommunications Solutions for Networks Solutions for Optical Fibre Telecommunications Networks Product Catalogue

2 Solutions for Fibre Optics Optical fibres are fibres made of glass which transport a signal containing several types of information at very high speeds in the form of pulses of light. This technology allows very high data flows to be achieved, up to several tens of Gigabits/second. The use of optical fibre technology allows networks to be fed over long distances with minimum losses. It also offers the advantage of being insensitive to electromagnetic interference. 3M offer fibre optic solutions for the main types of networks for the longand short-distance markets: FTTH : With its extensive experience in FTTH, 3M offers a complete solution from the fibre optic node (exchange) up to the subscriber point (interior distribution device). LAN : The equivalent of the VDI product for copper with RJ45 Keystone jacks, 3M lists a full fibreoptics range for your LAN networks. Security Video : 3M offers solutions to meet the installation needs of your Security Video systems. The products can be installed quickly and are easy to use. DATACENTER : 3M offers solutions for Meet Me Room (Copper and Fibre).

3 3

4 Fibre optic Solutions FTTX Solutions Content Page Description of the FTTH Network Optical Node Transport network FTTH access and distribution network Distribution solutions for buildings Summary table of splice protection enclosures Exchange Solutions RFO NG Optical Distribution Frame MODF 19 Optical Distribution Frame Transport Access Network Solution BPEO Size BPEO Size BPEO Size Distribution Access Network Solutions Underground distribution network BPEO Size 1, BPEO Size µqodc (Quick Optic Derivation Closure) Under- and above ground distribution network BPEO Size OSSC-OSLC-OSC Wall and Pole distribution network PBO Size 1 NG FTB (Fibre Terminal Box)

5 Page 4 Solutions for Building Distribution Building Entry Solutions PBO Size edb² Building Floor Solutions PBPO 24 NG Symetric PBPO/C NG Symetric Solutions for Living Units Wall Outlet 4 Fibres Wall Outlet 2 Fibres FTTH Wall Outlets M 8686 FTTH Wall Outlet M VOL-0256-C FTTH Wall Outlet FTTH Connectivity NPC Connectors M No Polish Connectors (NPC) M No Polish Connector Termination Kit 8865 and 8865-C M Angle Splicing Kit 2565 for NPC Connectors and Fibrlok Splices Crimplok + Connectors M Crimplok + Connectors M Crimplok + Terminations Kits Fibrlok Mechanical Splices M Fibrlok Mechanical Splices Fibrlok Indoor FRP Splice Connector M 2569 Indoor FRP Splice Connector M One Pass Mini Fibre Pathway LSZH M One Pass Mini Fibre Pathway Duct M One Pass Mini Fibre Pathway Product Accessories

6 Fibre optic Solutions FTTX Solutions Description of the FTTH Network ON (Optical Node) The ON is the location which houses the active components for transmission and switching and which acts as the interface between the collection and access networks. Optical distribution systems are available for open frames or for 19" racks. The choice between these two installation options mainly depends on the size of the location. For a large, shelter-type location the RFO NG solution on open frames is more suitable for more fl exibility during patching. For smaller locations, the MODF solution for 19 racks is the most suitable since it is more compact. RFO NG solution for frames MODF solution for 19 racks Transport network The transport network, also known as the access network, routes the fi bres from the access node to the street cabinet. High capacity fi bre optic cables and splice protection enclosure are used for this part of the network. 3M offers a full range of splice protection enclosures. There are four criteria of selection: - Network configuration: It is essential to know, whether confi guration is of MID SPAN, STRAIGHT JOINT, DERIVATION PONT or DISTRIBUTION TYPE. The type of confi guration involved will determine the front face of the housing. - The environment: This criteria determines the necessary IP (Protection class) for the housings. Locations with direct water exposure may need a higher IP class. - The capacity: This relates to the number and type of splices at the point of connection - The cables: This relates to cable characteristics such as the diameter, the number of fi bres and the structure. The 3M range of splice protection units for the transport network BPEO Size 4 BPEO Size 3 BPEO Size 2 Fibre capacity Range cable diameter* (mm) 4 to 27 4 to 27 4 to 27 Volume (L) IP Protection class IP 68 IP 68 IP 68 * Depending on the configuration (transit or break out). Please refer to the product page for further information. 6

7 Description of the FTTH Network FTTH access and distribution network The access and distribution network includes the section from the street cabinet up to the the fi bre optic distribution point (DP). The street cabinet is a point where the building operator provides other operators with access to the lines. The fi bre optic distribution point (DP) is the node in the access network architecture from which clients are connected. Closures protect the jointing points of cables between these two network locations. BPEO Size 1.5 BPEO Size 1 BPEO Size 0 µqodc PBO NG Fibre capacity Range cable diameter* (mm) 3 to 18 3 to 20 3 to to 11 Volume (L) < n.a* IP Protection index IP 68 IP 68 IP 68 IP 68 IP 44 * Depending on the configuration (input or output). Please refer to the product page for further information. Distribution solution for buildings Connections in buildings are the fi nal stage in an FTTH network. Fibres located at the base of a building are distributed and fi nally connected to subscribers. There are two types of architecture: "Direct Drop" architecture (1) An architecture is said to be "direct drop" when at fl oor landings there are no fi bre boxes provided between the Interior Optical Termination in the communications board for each of the dwellings and the operators services location (or room) at the base of the building. In this case an individual "drop" cable links each dwelling to the operators' services location (or room). Câble de branchement d'abonné Prise terminale client Kit de raccordement Prise terminale client terrain Fibrlok TM Prise terminale client Pied d'immeuble Adduction PBO T2 de l'immeuble "Riser cable" architecture (2) An architecture is said to be a "riser cable" architecture when at fl oor landings, there are fl oor boxes provided between the Interior Optical Termination in the communications board for each of the dwellings and the operators services location (or room) at the base of the building. In this case a riser cable links the operators' services location (or room) to all the boxes on a fl oor landing. Câble de distribution verticale ou câble "riser" Kit de raccordement terrain Fibrlok TM Kit de prise pré-câblée 4FO Boîtier de distribution de palier Tous les 1 à 2 étages Kit de prise PBPO 12/24 pré-câblée 4FO Kit de prise Kit de pré-câblée 4FO raccordement terrain Fibrlok TM Pied d'immeuble / Point de distribution Adduction PBPO 12/24 de l'immeuble PBO T2 V2 edb² PBPO 24 NG Symmetric PBPO/C NG Symmetric Wall Outlet Fibre capacity Application Building basement Building basement Floor Floor Inside Living Unit Type of housing Splice Suitable for connectors Splice Suitable for connectors Suitable for connectors 7

8 Fibre optic Solutions FTTX Solutions Summary table of splice protection enclosures Splice protection enclosure Cable entry kit Description BPEO Size 0 4-slot Reference Number N501741A Description ECAM Body Double D6-18 (from 6 to 18 mm) Cable Entry Kit for D from 6 to 9 mm Cable Entry Kit for D from 9 to 12 mm Cable Entry Kit for D from 12 to 15 mm Cable Entry Kit for D from 15 to 18 mm Max No. of cable entries Reference Number N721162A N721163A N721164A N721165A N721166A ECAM Single S3-7 (from 3 to 7 mm) ECAM Single S (from 3.5 to 9.5 mm) 12 2 N721171A N721172A BPEO Size 1 EOC 12-slot N501487A ECAM Single EVOL S5-18 (from 5 to 18 mm) 4 N530129A BPEO Size 1 EVOL CDP 12-slot BPEO Size 1 EVOL EDP 12-slot BPEO Size 1 EVOL FDP BRANCH 12-slot N501488A N501489A N501719A ECAM Double D5-20 (from 5 to 20 mm) ECAM Single S5-18 (from 5 to 18 mm) ECAM Double D5-20 (from 5 to 20 mm) ECAM Single S4-12 (from 4 to 12 mm) ECAM Body Double D6-18 (from 6 to 18 mm) Cable Entry Kit for D from 6 to 9 mm Cable Entry Kit for D from 9 to 12 mm Cable Entry Kit for D from 12 to 15 mm Cable Entry Kit for D from 15 to 18 mm N721130A N530129A N721130A N530128A N721162A N721163A N721164A N721165A N721166A BPEO Size 1 EVOL FDP DROP 12-slot N501714A ECAM Single S (from 3.5 to 9.5 mm) ECAM Body Double D6-18 (from 6 to 18 mm) Cable Entry Kit for D from 6 to 9 mm Cable Entry Kit for D from 9 to 12 mm Cable Entry Kit for D from 12 to 15 mm Cable Entry Kit for D from 15 to 18 mm N721172A N721162A N721163A N721164A N721165A N721166A ECAM Single S3-7 (from 3 to 7 mm) 16 N721171A BPEO Size 1.5 EVOL FDP BRANCH 12-slot N501747A ECAM Body Double D6-18 (from 6 to 18 mm) Cable Entry Kit for D from 6 to 9 mm Cable Entry Kit for D from 9 to 12 mm Cable Entry Kit for D from 12 to 15 mm Cable Entry Kit for D from 15 to 18 mm N721162A N721163A N721164A N721165A N721166A BPEO Size 1.5 EVOL FDP DROP 12-slot N501751A ECAM Single S (from 3.5 to 9.5 mm) ECAM Single S5-18 (from 5 to 18 mm) ECAM Body Double D6-18 (from 6 to 18 mm) Cable Entry Kit for D from 6 to 9 mm Cable Entry Kit for D from 9 to 12 mm Cable Entry Kit for D from 12 to 15 mm Cable Entry Kit for D from 15 to 18 mm N721172A N530129A N721162A N721163A N721164A N721165A N721166A ECAM Single S3-7 (from 3 to 7 mm) ECAM Single S4-12 (from 4 to 12 mm) 25 2 N721171A N530128A BPEO Size 2 EVOL CDP 28-slot BPEO Size 2 EVOL EDP 28-slot BPEO Size 2 EVOL BDP 28-slot N501491A N501492A N501493A ECAM Double D5-27 (from 5 to 27 mm) ECAM Single S5-18 (from 5 to 18 mm) ECAM Double D5-27 (from 5 to 27 mm) ECAM Single S4-12 (from 4 to 12 mm) ECAM Single S5-18 (from 5 to 18 mm) ECAM Double D5-20 (from 5 to 20 mm) ECAM Single S4-12 (from 4 to 12 mm) N721131A N530129A N721131A N530128A N530129A N721130A N530128A BPEO Size 3 EVOL CDP 48-slot BPEO Size 3 EVOL EDP 48-slot BPEO Size 3 EVOL BDP 48-slot N501494A N501495A N501496A ECAM Double D5-27 (from 5 to 27 mm) ECAM Single S5-18 (from 5 to 18 mm) ECAM Double D5-27 (from 5 to 27 mm) ECAM Single S4-12 (from 4 to 12 mm) ECAM Single S5-18 (from 5 to 18 mm) ECAM Double D5-20 (from 5 to 20 mm) ECAM Single S4-12 (from 4 to 12 mm) N721131A N530129A N721131A N530128A N530129A N721130A N530128A BPEO Size 4 72-slot N501675A ECAM Double D5-27 (from 4 to 27 mm) ECAM Single S4-27 (from 4 to 27 mm) 1 5 N501790A N501791A 8

9 Splice protection housing Description Reference Number BPEO Size 0 4-slot N501741A Max No. of. cassettes Cassettes 4 x cassettes 1-step 2 x cassettes 2-step Compatibility All part numbers Wall support Reference Number Support molded into the housing base BPEO Size 1 EOC 12 x cassettes 1-step N501487A All part numbers 12-slot 6 x cassettes 2-step N711599A BPEO Size 1 EVOL CDP 12 x cassettes 1-step N501488A All part numbers 12-slot 6 x cassettes 2-step N711599A BPEO Size 1 EVOL EDP 12 x cassettes 1-step N501489A All part numbers 12-slot 6 x cassettes 2-step N711599A Description Cassettes FO G652 / G657 Number of slots Reference Number K7-1 support 12 x fusion splices 1 N541106A K7-1 support 2 x 6 fusion splices 1 N541182A K7-1 support 9 x fusion splices and 1 x splitter 1 N541113A K7-1 support 6 x Fibrlok 2540G 1 N541103A K7-1 support and 2 splitters x 6 fusion splices 1 N541155A K7-2 supports 12 x fusion splices or 12 Fibrolk 2540G 2 N541121A K7-2 supports 12 x fusion splices and 1 x splitter 2 N541104A K7-2 supports 24 x fusion splices and 1 x splitter 2 N541151A K7-2 supports 12 x Fibrlok 2540G 2 N541108A K7-2 supports 10 x Fibrlok 2540G and 1 x splitter 2 N541110A BPEO Size 1 EVOL FDP BRANCH 12-slot BPEO Size 1 EVOL FDP DROP 12-slot N501719A N501714A 12 x cassettes 1-step All part numbers N711599A 6 x cassettes 2-step 12 x cassettes 1-step All part numbers N711599A 6 x cassettes 2-step To obtain the number of cassettes for a given type of closure simply read the number of slots that the organiser contains and the number of slots occupied by a cassette. Example: BPEO S1 is a 12-slot organiser 12 x 12 fusion cassettes (541106) can be housed or 6 x 12 Fibrlok 2540G cassettes (541108). BPEO Size 1.5 EVOL FDP BRANCH 12-slot N501747A Support built 12 x cassettes 1-step 6 x cassettes 2-step All part numbers into the body of the housing BPEO Size 1.5 EVOL FDP DROP 12-slot N501751A Support built 12 x cassettes 1-step 6 x cassettes 2-step All part numbers into the body of the housing BPEO Size 2 EVOL CDP 28-slot BPEO Size 2 EVOL EDP 28-slot BPEO Size 2 EVOL BDP 28-step BPEO Size 3 EVOL CDP 48-slot BPEO Size 3 EVOL EDP 48-step BPEO Size 3 EVOL BDP 48-step BPEO Size 4 72-slot N501491A N501492A N501493A N501494A N501495A N501496A N501675A 28 x cassettes 1-step All part numbers N711600A 14 x cassettes 2-step 28 x cassettes 1-step All part numbers N711600A 14 x cassettes 2-step 28 x cassettes 1-step All part numbers N711600A 14 x cassettes 2 Step 48 x cassettes 1-step All part numbers N711600A 24 x cassettes 2 Step 48 x cassettes 1-step All part numbers N711600A 24 x cassettes 2-step 48 x cassettes 1-step All part numbers N711600A 24 x cassettes 2-step 72 x cassettes 1-step All part numbers N711660A 36 x cassettes 2-step 9

10 Fibre optic Solutions FTTX Solutions 1 Exchange Solutions RFO NG Optical Distribution Frame > Description The RFO NG is the new generation end-of-cable, connection modules and tray modules for exchange optical distribution units It is used for fi bre distribution patchcord management on frames. RFO NG exists in 12- or 6-drawers block with respective fi bre capacities of 144 and 72 fi bres. Technical Information Dimensions Cable-head fitted with modules RFO NG installer training Height Width Depth 12-drawer chassis 258 mm 290 mm 260 mm 6-drawer chassis 126 mm 290 mm 260 mm Connection modules Height Width Depth 18 mm 160 mm 185 mm Weight 12-drawer chassis 6-drawer chassis 4.96 kg 2.42 kg 3M Télécommunications offers free training to allow you to take on projects with confi dence. Simply contact your area sales contact. Training objectives: Installing an optical distribution frame (ODF) from the RFO NG range. Content: Installing an ODF in an exchange or a specifi c network Connecting an ODF to the network Creating a client link between equipment and the network Duration: 2 hours Location: 3M location or directly on site Materials Cable-head: Modules: Connectivity: Pigtails: Splices: Steel. Colour Ivory Plastic. Colour Black In standard type SC/APC, LC/APC or SC/UPC RFO NG capacity depending on frames Semi-tight structure 900 µm, single-mode fi bres G652D and G657 A2 and multimode fi bre OM3 Fusion-type splice support. Other types - please contact us 12-drawer chassis 6-drawer chassis Capacity Number of ports Capacity Number of ports 2.00 m Frame m Frame m Frame

11 1 Exchange Solutions Composition of the RFO NG system DEECAM Break-out module Cable inlet through top or bottom For spreading out cable in 12-fi bre tubes for feeding modules (12 fi bres per module) Chassis 6- or 12 drawers, for coiling of tubes and fi xing of Entry/Output tray modules of jumpers on the left using a comb Frames For mounting chassis Jumper management using rings Module Corner pieces for fi xing the frame provides links as splices between the cable fi bres and jumpers. RFO NG - 12-drawer chassis 144 fi bres (without module) N711747A 1 RFO NG - 6-drawer chassis 72 fi bres (without module) N711748A 1 RFO NG - Pre wired module 12 SC/APC G652D N541133A 12 RFO NG - Pre wired module 12 SC/UPC G652D N541181A 12 RFO NG - Pre wired module 12 SC Multi-mode OM3 N541199A 12 RFO NG Symetric - Prewired Module 12 SC/APC G652 N541193A 12 Protective patchcord holder for RFO NG symetric tray N671317A 12 For other variations of RFO NG modules, please contact your local 3M representative. RFO NG - Frame 2.00 m - 6 levels N801585A 1 RFO NG - Frame 2.50 m - 8 levels N801595A 1 RFO NG - Frame 3.25 m - 11 levels N801584A 1 RFO NG m reel of tube D5/3 N581203A 1 RFO NG - 25 m reel of tube D5/3 N581207A 1 RFO NG - Breakout Housing DEECAM D18 for 24 D5/3 N711547A 1 RFO NG - Breakout Housing DEECAM D25 for 60 D5/3 N711597A 1 11

12 Fibre optic Solutions FTTX Solutions 1 Exchange Solutions MODF 19 Optical Distribution Unit > The MODF 2K 19 range The 3M MODF is the benchmark in terms of equipment connection on 19" racks. This distribution unit offers a high capacity of 144 fi bres per 3U chassis. The MODF also allows scalable equipment of the chassis and is equipped with a 1U guide panel for jumpers with bending radius being secured. Optical distributor for 19 rack Capacity: 144 fi bres Height : 3U Characteristics Compact connection module Double sided stowage zone cassette for separation of non-sleeved fi bres and pigtails Complete system Advantages Compact with 144 connexions on only 3U (19 Rack) Easy to install Can be extended at any time Coordination of jumper paths and preservation of minimum bending radius Coil stowage of excess lengths of fi bres 19" chassis: Height 3 U and usable width 84 units (84 HP/TE) Allows mounting of 12 MODF 2K modules (width 7 units) Content: Aluminium, chassis, pre-assembled, incl. 12 sets of guides for MODF modules Standard layout compatible with 2K modules of width 7 Dimensions: 135 x 485 x 190 mm (H x W x D) Weight: 1.3 kg MODF 2K-19" chassis, 3U , 1U Tray, Access Fibre Tray: To be placed beneath the 3U chassis to stow coils of excess lengths of cable tubes. Access from the rear removable compartment. Content: - Pre-assembled with fi tting accessories - Dimensions: 44 x 483 x 280 mm (H x W x D) - Weight: 1.9 kg MODF 2K-Tray 19, 1U, Access Fibre Tray

13 1 Exchange Solutions Patchcord Management Tray, 19, 1U: 1U drawer to be fi xed beneath the chassis to manage the input and outputs of jumpers Left or right inputs, guides to secure bending radius requirements Content: - Pre-assembled with 6 guides and mounting accessories - Dimensions: 73 x 485 x 100 mm - weight: 1.1 kg MODF2K-Patchcord Management Tray, 19", 1U MODF 2K/7 TE - Connection and splicing modules for 19" chassis: Coupling modules 2K-7TE (35 mm width) pre wired with 12 connections and 12 pigtails All ends of pigtails are prepared for splicing and colour identifi ed Storage of excess lengths of pigtails and splices in separate cassettes The ANT splice protections, heat-shrink splice protections and their supports are available as accessories Capability of mounting 12 x 2K/7TE modules per chassis. Other 2K modules on demand Module 2K/7TE-SM-SC/APC G652D Module 2K/7TE-SM-SC G652D For other variations of 2k modules, please contact your local 3M representative. Splice module 2K/8TE - 24 splices: Splice module with 2 splice cassettes. Dimensions: 128 x 40 x 215 mm (H x W x D) Splice module 2K/8TE-24 splices: Cover 3U, 7TE: To close unused locations in the rack Cover 3U, 7TE

14 Fibre optic Solutions FTTX Solutions 2 Transport Access Network Solutions BPEO Size 4 > Description The Dome Closure BPEO Size 4 fi bre-optic splice protection is IP68 watertight. It is used to protect splices in underground or overhead installations with the capability of being fi xed horizontally or vertically in a manhole. The FDC 12S meets high fi bre-capacity requirements; up to 864. A - Valves B - Closures C - Hooks D - Dual port ECAM D4-27 E - 5 single port ECAM S4-27 F - Earthing kit G - Closures The BPEO Size 4 can be equipped with a dual ECAM D4-27 and 5 single ECAM S4-27. These entries allow micro-sleeve cables to be introduced with a maximum diameter of 27 mm. C F B G A D B E B Max capacity: 864 Fibres Volumes: 57.9L Cable diameters: 4 to 27 mm Configurations: - 1 Double port for ECAM D Single ports for ECAM S4-27 Perfect for 720-fibre cables Characteristics Fully mechanical closure 5 Individual entries + 1 double entry Use of 2 cassette organisers High capacity cassette organisers Supplied without cassettes and without cable entries Technical Information Advantages No fl ame, no energy source required Allows 1 cable to be connected in mid span access and/or up to 5 branched cables For high-capacity coiling and stowage of cable micro-structures or loose tubes Can be used to connect 720 / 864 fi bres Capable of using all the cassettes in the BPEO Dimensions in mm (L x H) : 658 x 335 Cable entry ports and dimensions Single entry ports: Double oval entry port: Maximum number of fusion splices: Cassette: Base material: Closure system: Pressure flash test: 5 for cables of diameter 4 to 27 mm 1 double port for cables of diameter 4 to 27 mm 864 fi bres N541106A (cassette for 12 fusion splices) Plastic Steel lock 280 mbar BPEO Size 4 Dome Sleeve BPEO Size 4 - Dome Sleeve for 864 FO max - One double entry D x single entries D4-27 N501675A 1 ECAM ECAM Double D4-27 for BPEO Size 4 - One double entry D4-27 ECAM-27MM-D 1 ECAM Single S4-27 for BPEO Size 4 - One single entry D4-27 ECAM-27MM-S 1 Support Wall support N711660A 1 14

15 2 Transport Access Network Solutions BPEO Size 3 > Description The BPEO size 3 is an IP 68 watertight splice protection closure which allows the splicing of up to 288 each Fibrlok 2540-G mechanical splices or 576 each fusion splices. The BPEO size 3 organiser is a 48-slot unit. Transit fi bres in uncut loose tubes or micro tubes can be stored behind the cassette support. Max capacity: 576 Fibres Volumes: 23.8L Cable diameters: 4 to 27 mm Configurations: - CDP (primary branch) - EDP (secondary branch) - BDP (distribution) Characteristics Sealed closure opened using latches ECAM type cable entries Organiser with three management zones Storage of tubes, modules or bare fi bres in lower part of the organiser 48 slot organiser for swivel mounted cassettes Side channels for fi bres to pass through Plugs on all inlet ports and test valves as standard Advantages Simplifi ed opening/closure No fl ame, no resin for preparation of entries ECAM preparation outside the housing Storage / protection on a genuine plate Cassettes for storing fi bres in 250 µm structure Ability to mix cassettes on the same organiser Easy access to fi bres Watertighness is confi rmed for each closure after assembly Technical Information Sealing: Impact: Tensile: IP68 Resistance at 20 Joules (IK10) Tested at 100 dan on cable Dimensions (in mm) : Length Width Depth Housing only Wall mounted Post/wall Underground Number of slots in the organiser: 48 Configurations of BPEO Size 3 Primary branch CDP Secondary branch EDP Distribution BDP - 6 single ports for ECAM S double port for ECAM D5-27 or 2 single ports for ECAM S5-18 Key: - 10 single ports for ECAM S single ports for ECAM S double port for ECAM D5-27 or 2 single ports for ECAM S single ports for ECAM S double port for ECAM D5-20 or 2 single ports for ECAM S4-12 Single port for ECAM S5-18 Double port for ECAM D5-27 or 2 single ports for ECAM S5-18 Single port for ECAM S4-12 Double port for ECAM D5-20 or 2 single ports for ECAM S

16 Fibre optic Solutions FTTX Solutions 2 Transport Access Network Solutions Description BPEO Size 3 BPEO-3 EVOL CDP 48 SLOT Splice protection closure CDP BPEO-3 EVOL EDP 48 SLOT Splice protection closure EDP BPEO-3 EVOL BDP 48 SLOT Splice protection closure BDP Reference No. MOQ N501494A 1 N501495A 1 N501496A 1 Description ECAM Double and Single ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm ECAM Single S5-18 Single cable entry kit with diameter from 5 to 18 mm ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm ECAM Double D5-27 Double cable entry kit with diameter from 5 to 27 mm Reference No. MOQ N721126A 10 N721127A 10 N721130A 5 N721131A 5 Description Reference No. MOQ ECAM Extended (Multi-entry) ECAM Extended S12-12 x 1.5 mm for 12 x 1.5 mm cables N721140A 10 ECAM Extended S18-7 x 5.5 mm for 7 x 5.5 mm cables (works for 6 x 6 mm) N721141A 10 ECAM Extended S12-10 x 2 mm for 10 x 2 mm cables N721142A 10 ECAM Extended S12-4 x 4 mm for 4 x 4 mm cables N721146A 10 Extended ECAMs allow several cables to be inserted in entries. Description Reference No. MOQ BPEO Cassettes K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices N541106A 20 K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10 K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10 K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20 K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G mechanical splices K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G mechanical splices K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea Fibrlok 2540-G mechanical splices N541103A 20 N541108A 10 N541110A 10 Description Reference No. MOQ Fixing support and adaptor kit BPEO Wall or Pole mounting kit BPEO sizes 2 and 3 N711440A 5 BPEO Sewer type mounting kit sizes 2 and 3 N711546A 5 BPEO Wall mounting kit V2 for BPEO sizes 2 and 3 N711600A 5 Coupling holder 6 x SC connectors for BPEO S1, S2, S3 (supplied without connectors) N711604A 20 Coupling holder 12 x SC connectors for BPEO S2, S3 (supplied without connectors) N711605A 20 Earthing kit for BPE/O* N151064A 10 * Not compatible with supports /

17 2 Transport Access Network Solutions BPEO Size 2 > Description The BPEO Size 2 is a watertight splice protection closure which allows splicing of up to 168 each Fibrlok 2540-G mechanical splices or 336 each fusion splices. The size 2 organiser is a 28 slot unit. Transit fi bres in uncut loose tubes or micro tubes can be stored behind the cassette support. Max capacity: 336 Fibres Volumes: 17.3L Cable diameters: 4 to 27 mm Configurations: - CDP (primary branch) - EDP (secondary branch) - BDP (distribution) Characteristics Sealed closure opened using latches ECAM type cable entries Organiser with three management zones Storage of tubes, modules or bare fi bres in lower part of the organiser 28 slot organiser for swivel mounted cassettes Side channels for fi bres to pass through Plugs on all inlet ports and test valves as standard Advantages Simplifi ed opening/closure No fl ame, no resin for preparation of inlets ECAM preparation outside the housing Storage / protection on a genuine plate Cassettes for storing fi bres in 250 µm structure Ability to mix cassettes on the same organiser Easy access to fi bres Watertighness is confi rmed for each closure after assembly Technical Information Sealing: Impact: Tensile: IP68 Resistance at 20 Joules (IK10) Tested at 100 dan on cable Dimensions (in mm) : Length Width Depth Housing only Wall mounted Post/wall Channel Number of slots in the organiser: 28 Configurations of BPEO Size 2 Primary branch CDP Secondary branch EDP Distribution BDP - 6 single ports for ECAM S double port for ECAM D5-27 or 2 single ports for ECAM S single ports for ECAM S single ports for ECAM S double port for ECAM D5-27 or 2 single ports for ECAM S single ports for ECAM S double port for ECAM D5-20 or 2 single ports for ECAM S4-12 Key: Single port for ECAM S5-18 Double port for ECAM D5-27 or 2 single ports ECAM S5-18 Single port for ECAM S4-12 Double port for ECAM D5-20 or 2 single ports ECAM S

18 Fibre optic Solutions FTTX Solutions 2 Transport Access Network Solutions Description BPEO Size 2 BPEO-2 EVOL CDP 28 SLOT Splice protection housing CDP BPEO-2 EVOL EDP 28 SLOT Splice protection housing EDP BPEO-2 EVOL BDP 28 SLOT Splice protection housing BDP Reference No. MOQ N501491A 1 N501492A 1 N501493A 1 Colour code for compatibility between front faces BPEO (CDP, EDP and BDP) and ECAM versions Description ECAM Double and Single ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm ECAM Single S5-18 Single cable entry kit with diameter from 5 to 18 mm ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm ECAM Double D5-27 Double cable entry kit with diameter from 5 to 27 mm Reference No. MOQ N721126A 10 N721127A 10 N721130A 5 N721131A 5 Description Reference No. MOQ ECAM Extended (Multi-entry) ECAM Extended S12-12 x 1.5 mm for 12 x 1.5 mm cables N721140A 10 ECAM Extended S18-7 x 5.5 mm for 7 x 5.5 mm cables (works for 6 x 6 mm) N721141A 10 ECAM Extended S12-10 x 2 mm for 10 x 2 mm cables N721142A 10 ECAM Extended S12-4 x 4 mm for 4 x 4 mm cables N721146A 10 Extended ECAMs allow several cables to be inserted in entries. Description Reference No. MOQ BPEO Cassettes K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices N541106A 20 K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10 K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10 K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20 K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G mechanical splices K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G mechanical splices K7-2SLOT-10 Fibrlok 4 x 4 and splitter 2-step Cassette equipped with a support for 10ea Fibrlok 2540-G mechanical splices N541103A 20 N541108A 10 N541110A 10 Description Reference No. MOQ Fixing support and adaptor kit BPEO Wall or Pole mounting kit BPEO sizes 2 and 3 N711440A 5 BPEO Sewer type mounting kit sizes 2 and 3 N711546A 5 BPEO Wall mounting kit V2 for BPEO sizes 2 and 3 N711600A 5 Coupling holder 6 x SC connectors for BPEO S1, S2, S3 (supplied without connectors) N711604A 20 Coupling holder 12 x SC connectors for BPEO S2, S3 (supplied without connectors) N711605A 20 Earthing kit for BPE/O* N151064A 10 * Not compatible with supports /

19 3 Distribution Access Network Solutions 3.1 Underground distribution network BPEO Size 1.5 The BPEO Size 1.5 is an IP68 watertight splice protection closure which allows splicing of 72 each Fibrlok 2540-G mechanical splices or 144 each fusion splices. Despite remaining compact this new BPEO now provides a genuine distribution node between the street cabinet and all distribution points. Max capacity: 144 Fibres Volumes: 5.6L Cable diameters: 3.5 to 18 mm Height which allows easy storage and management of excess lengths Wall support built into the body of the housing Characteristics Watertight closure opened using latches ECAM type cable entries Organiser with three management zones Storage of tubes, modules or bare fi bres in lower part of the organiser 12 slot organiser for swivel mounted cassettes Side channels for fi bres to pass through Plugs on all inlet ports and test valves as standard Advantages Simplifi ed opening/closure No fl ame, no resin for preparation of inlets ECAM preparation outside the housing Storage / protection on a genuine plateau Cassettes for storing fi bres in 250 µm structure Ability to mix cassettes on the same organiser Easy access to fi bres Watertighness is confi rmed for each closure after assembly Technical Information Sealing: Impact tests: Cable pull-out retention force: IP68 Resistant at 20 Joules (IK10) Tested at 100 dan on cable Dimensions (in mm) : Length Width Depth Colour Material Splicing capacity Black Thermoplastic 144 fi bres (12 cassettes à 12 heat shrink fusion splices 45 or 60 mm) Configuration of BPEO Size 1.5 FDP Branch 1 double port for Double ECAM D6-18 or 2 Single ECAM S single ports for Single ECAMs S single ports for Single ECAMs S5-18 FDP Drops 1 double port for Double ECAM D6-18 or 2 Single ports S single ports for Single ECAMs S3-7 2 single ports for Single ECAMs S

20 Fibre optic Solutions FTTX Solutions 3 Distribution Access Network Solutions BPEO Size 1.5 BPEO FDP Branch N501747A 1 BPEO FDP Drops N501751A 1 Colour code for compatibility between front faces BPEO and ECAM versions Double ECAM Double D6-18 ECAM for cable entry kit Body for housing double cable entry kits ECAM Double D6-9 mm Sealing kit with diameter from 6 to 9 mm ECAM Double D9-12 mm Sealing kit with diameter from 9 to 12 mm ECAM Double D12-15 mm Sealing kit with diameter from 12 to 15 mm ECAM Double D15 to 18 mm Sealing kit with diameter from 15 to 18 mm ECAM Double D18-4,5/6 for cable entry kit Body for housing double cable entry kits ECAM Double D4,5/6 mm Sealing kit with diameter from 4,5 to 6 mm N721162A 10 N721163A 10 N721164A 10 N721165A 10 N721166A 10 N721162B 10 N721176A 10 For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on the diameter of cable required (from 6 to 18 mm). Single ECAM Single ECAM S3-7 Single cable entry kit with diameter from 3 to 7 mm Single ECAM S Single cable entry kit with diameter from 3.5 to 9.5 mm Single ECAM S4-12 Single cable entry kit with diameter from 4 to 12 mm Single ECAM S5-18 Single cable entry kit with diameter from 5 to 18 mm N721171A 100 N721172A 60 N721126A 10 N721129A 10 BPEO Cassettes K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support N541106A fusion splices K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10 K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10 K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20 K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G mechanical splices N541103A 20 K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G mechanical splices N541108A 10 K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 10ea Fibrlok 2540-G mechanical splices N541110A 10 K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fi bre G657 (lot of 12 pcs) N541182A 1 20

21 3 Distribution Access Network Solutions BPEO Size 1 The BPEO Size 1 is a watertight splice protection closure which allows splicing of up to 72 each Fibrlok 2540-G mechanical splices or 144 each fusion splices. The organiser is a 12 slots unit as micro-structures mid span access and 8 slots as loose tubes mid span access. Max capacity: 144 Fibres Volumes: 4.8L Cable diameters: 3 to 20 mm Configurations: - EOC (Straight joint) - CDP (Primary branch) - EDP (Branch) - FDP (Branch) - FDP (Drops) Characteristics Watertight closure opened using latches ECAM type cable entries Organiser with three management zones Storage of tubes, modules or bare fi bres in lower part of the organiser 12 slot organiser for swivel mounted cassettes Side channels for fi bres to pass through Plugs on all inlet ports and test valves as standard Technical Information Advantages Simplifi ed opening/closure No fl ame, no resin for preparation of inlets ECAM preparation outside the housing Storage / protection on a genuine plateau Cassettes for storing fi bres in 250 µm structure Ability to mix cassettes on the same organiser Easy access to fi bres Watertighness is confi rmed for each closure after assembly Sealing: Impact: Tensile: IP68 Resistance at 20 Joules (IK10) Tested at 100 dan on cable Dimensions (in mm) : Length Width Depth Housing only Wall mounted Pole mounted Channel Number of slots: 12 Configurations of BPEO Size 1 EOC Straight Joint Primary branch CDP EDP Branch 4 single ports for ECAM S5-18 Key: - 2 single ports for ECAM S double port D5-20 or 2 single ports for ECAM S single ports for ECAM S double port for ECAM D5-20 or 2 single ports for ECAM S4-12 Single port for ECAM S5-18 Double port for ECAM D5-27 or 2 single ports for ECAM S5-18 Single port for ECAM S4-12 Double port for ECAM D5-20 or 2 single ports for ECAM S4-12 New configurations FDP Branch FDP Drops 21

22 Fibre optic Solutions FTTX Solutions 3 Distribution Access Network Solutions Description BPEO Size 1 Reference No. MOQ BPEO - 1 Evol EOC N501487A 1 BPEO - 1 Evol CDP N501488A 1 BPEO - 1 EDP N501489A 1 BPEO - 1 FDP Branch N501719B 1 BPEO - 1 FDP Drops N501714A 1 Colour code for compatibility between front faces BPEO and ECAM versions Description Double ECAM Reference No. MOQ Double D6-18 ECAM for cable entry kit Body for housing double cable entry kits N721162A 10 ECAM Double D6-9 mm Sealing kit with diameter from 6 to 9 mm N721163A 10 ECAM Double D9-12 mm Sealing kit with diameter from 9 to 12 mm N721164A 10 ECAM Double D12-15 mm Sealing kit with diameter from 12 to 15 mm N721165A 10 ECAM Double D15 to 18 mm Sealing kit with diameter from 15 to 18 mm N721166A 10 ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm N721130A 5 For the ECAM Double D6-18, order the body (721162) and order each sealing kit depending on the diameter of cable required (from 6 to 18 mm). Description Single ECAM Evolution Reference No. MOQ Single ECAM S3-7 Single cable entry kit with diameter from 3 to 7 mm N721171A 100 Single ECAM S Single cable entry kit with diameter from 3.5 to 9.5 mm N721172A 60 ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm N721126A 10 ECAM Single S Single cable entry kit with diameter from 5 to 18 mm N721127A 10 Description ECAM Extended (Multi-entry) Reference No. MOQ ECAM Extended S12-12 x 1.5 mm for 12 x 1.5 mm cables N721140A 10 ECAM Extended S18-7 x 5.5 mm for 7 x 5.5 mm cables (works for 6 x 6 mm) N721141A 10 ECAM Extended S12-10 x 2 mm for 10 x 2 mm cables N721142A 10 ECAM Extended S12-4 x 4 mm for 4 x 4 mm cables N721146A 10 Extended ECAMs allow several cables to be inserted in entries Description BPEO Cassettes Reference No. MOQ K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices N541106A 20 K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541104A 10 K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10 K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20 K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G mechanical splices N541103A 20 K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G mechanical splices N541108A 10 K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 10ea Fibrlok 2540-G mechanical splices N541110A 10 K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fi bre G657 (lot of 12 pcs) N541182A 1 Description Fixing support and adaptor kit Reference No. MOQ BPE/O Pole 1 Wall or Pole mounting kit BPEO size 1 N711438A 5 BPE/O Wall and post mounting kit V2 for BPEO size 1 N711599A 5 Coupling holder 6 x SC connectors for BPEO S1, S2, S3 (supplied without connectors) N711604A 20 Coupling holder 12 x SC connectors for BPEO S2, S3 (supplied without connectors) N711605A 20 22

23 3 Distribution Access Network Solutions µqodc (Quick Optic Derivation Closure ) The µqodc micro-sleeve is an in line watertight splice protection closure designed for networks connecting subscribers using fi bre optics. The housing, whose volume is less than 2 dm 3 is designed to be installed in small L1T type chambers. Ideal derivations on tubes or splicing on micro cables from window cut or mid span access feeder for FTTH networks. Max capacity: 24 Fibres Volumes: 1L Cable diameters: 4.2 to 11 mm Configuration: 1 main cable diam. 11 mm or micro-cable diam. 4.2 mm Branch of 2 tubes of diam. 3.3/5 mm or 2 cables of 4/6 mm or 8 cables of 2.5/3.5 mm Compatible only with single-mode fi bres with small radii of curvature G657A2 Characteristics Compact Sealed and mechanical closure Extraction with or without splices, derivations, looping of cables Micro module-cable compatible Up to 24 splices and 1 PLC type splitter IP68 / IK09 Up to 8 micro module-cable outputs of 2.5 mm Advantages Less than 2 dm 3 for installation in L1T chamber No fl ame, no resin No special tools A single product for the various distribution confi gurations Space saving in chambers and sewers Utilisation in PON and Point to Point networks Highly robust multi-purpose product used in underground chambers, directly buried and replacement of networks on walls Benefi ts for residential connections Technical Information Overall Dimensions: 295 x 83 x 55 mm Overall Volume: 1L Colour: Black Degree of Protection: IP68 / IK09 Material: Fastenings: Fixing: Thermoplastic body stainless steel 2 screws -diameter 6 mm (not supplied) µqodc configurations Cable entries: Derivation: Feeder 11 mm window cut cable or 4.2 mm micro module-cable 2 Tubes of 3.3/5 mm, 2 x 4/6 mm cables or 8 2.5/3.5 mm cables Connection point management Micro-modules: Splices: Splitter: 7 x 2.20 metres in storage beneath the cassette if used as spur on standard cables As standard, support for 24 x 45 mm fusion splices 1 location for PLC type splitter 4 x 4 mm Empty micro-sleeve for transit cable diameter 4.2 mm or 11 mm. Plugs on outlets N501600A 13 Micro-sleeve 24 for transit cable diameter 4.2 mm or 11 mm. 2 off 4 x 2.5 mm outlets N501604A 10 For other confi gurations please contact your local 3M representative 23

24 Fibre optic Solutions FTTX Solutions 3 Distribution Access Network Solutions 3.2 Under and above ground distribution network BPEO Size 0 Max capacity: 48 Fibres Volumes: < 2L Cable diameters: 3 to 18 mm The new BPEO Size 0 watertight splice protection closure has been specifi cally designed to easily connect subscribers in the distribution network using ITU G652.D or ITU. G657.A2 single-mode fibres. Its compactness (volume less then 2 litres) means it can be used in any type of chamber, even the smallest. Its butt configuration facilitates the use in narrow chambers. Its double port and its 14 single ports cover all applications, depending on the topography of the zone (residential, mixed or building). The BPEO Size 0 has also been designed to be used in other FTTH branch applications (aerial, on pole, or on walls) or in any type of location. Characteristics Small size and volume Mounting bracket molded in the base body ECAM mechanical cable entries - Clip closure / simplifi ed opening Advantages Versatile usage in the civil work Quick to install No tools required. New connections prepared outside the housing with no risk to fi bres already active No special tooling, so faster and more effi cient Technical Information Dimensions (Outside ECAM in mm) : Length Width Depth Splicing capacity Material Colour Sealing: 4 x 1-slot cassettes or 2 x 2-slot cassettes, that is maximum 48 fusion splices of 45 or 60 mm Thermoplastic Black IP68 Configurations of the BPEO Size 0 1 Double port* for 1 x ECAM D6-18 or 2 x ECAM S single ports* for ECAM S3-7 2 single ports* for ECAM S * The housing is supplied completely sealed, with blind plugs in all cable entry ports, which can easily be removed. 24

25 3 Distribution Access Network Solutions BPEO-0 EVOL Splice Protection Housing N501741A 10 Double ECAM Double ECAM Body D6-18 for cable entry kit Body for housing the double cable entry kits Double ECAM D6-9 mm Sealing kit with diameter from 6 to 9 mm Double ECAM D9-12 mm Sealing kit with diameter from 9 to 12 mm Double ECAM D12-15 mm Sealing kit with diameter from 12 to 15 mm Double ECAM D15-18 mm Sealing kit with diameter from 15 to 18 mm Double ECAM D18 - D4,5/6 for cable entry kit Body for housing double cable entry kits Double ECAM D4,5-6 mm Sealing kit with diameter from 4,5 to 6 mm N721162A 10 N721163A 10 N721164A 10 N721165A 10 N721166A 10 N721162B 10 N721176A 10 Single ECAM Single ECAM S3-7 mm Single cable entry kit with diameter from 3 to 7 mm Single ECAM S mm Single cable entry kit with diameter from 3.5 to 9.5 mm Single ECAM S4-12 mm Single cable entry kit with diameter from 4 to 12 mm N721171A 100 N721172A 60 N721126A 10 BPEO Cassette K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices and PLC splitter N541106A 20 N541104A 10 K7-2SLOT-Universal for 12 heat shrink fusion splices N541121A 10 K7-1SLOT- For 9 heat shrink fusion splices and a 4 x 4 type PLC splitter N541113A 20 K7-1SLOT-6 Fibrlok 4 x 4 1-step Cassette equipped with a support for 6ea Fibrlok 2540-G mechanical splices K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 12ea Fibrlok 2540-G mechanical splices K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a support for 10ea Fibrlok 2540-G mechanical splices K7-1SLOT-2 x 6 heat shrink fusion splices (twin-zone) designed for fi bre G657 (lot of 12 pcs) N541103A 20 N541108A 10 N541110A 10 N541182A 1 25

26 Fibre optic Solutions FTTX Solutions 3 Distribution Access Network Solutions OSSC & OSLC & OSC30 Derivation closure for FTTx applications ONE STEP CLOSURES (OSC) are sealed splice protections for inline derivations. These three housings can be used for micro-module derivations inline cables. Designed for outdoor use on walls, on façade. Their compact dimensions also mean that they can be installed in indoor risers. Content Allowable cables: 1 or 2 branches per tube Max cable diameters 6.5 mm for OSSC (One Step Small Closure) 13 mm for OSLC (One Step Large Closure) 18 mm for OSC30 No special tools Perfect for overhead applications A single piece housing Sealing gel A central part to receive the spur Characteristics Compact Sealed and mechanical closure Derivation without splices IP67 / IK09 Ties to immobilised the main cable and the branch tubes No tools needed for closure. Can be re-opened Advantages No fl ame, no resin No special tools Space saving on façades or in risers For outdoor above ground usage Technical Information Sealing: IP 67 Materials: Thermoplastic Colour: Black Cable strain relief: Using ties Fixing: 2 screws (not supplied) Range of cables: Inline cables, 1 or 2 derivation with tube Allowable Diameters/ Dimensions OSSC 121T: 140 x 36 x 30 m: OSSC 122T: 140 x 36 x 30 mm: OSLC 222: 150 x 50 x 40 mm: OSC30: 290 x 95 x 50 mm: Distribution cable: max diameter 6.5 mm Branching: 1 x max diameter 6.5 mm Distribution cable: max diameter 6.5 mm Branch tubes: 2 x max diameter 6.5 mm Distribution cable: max diameter 13 mm Branch tubes: 2 x max diameter 6.5 mm Distribution cable: max diameter 18 mm Branch tubes: 2 x max diameter 13 mm Derivation closure OSSC 121T N501425A 25 Derivation closure OSSC 122T N501454A 25 Derivation closure OSLC 222 N501426A 10 Derivation closure OSC30 N501652A 10 26

27 3 Distribution Access Network Solutions 3.3 Wall and Pole distribution network PBO Size 1 NG Max capacity: 48 fi bres (4 cassettes) Configuration: - 1 to 2 service cables - 12 subscriber drops Small size Pole bracket molded into the body of the housing 4 break thru ports to fix on wall Its design is based on the BMX type outdoor box range. Its size has been reduced to meet the needs of a discrete or small-sized installation. The housing can be installed either on pole or wall. The hinge-mounted housing cover closure is latch operated. The cables are anchored inside the housing on a strain relief bar. The organiser and cassettes are the same standard as that found in our various sealed closures and boxes. This ensures that the internal organisation of our housings are multi-purpose. For locking mechanism, contact 3M. Characteristics Advantages Small overall dimensions Housing with latch-operated hinged cover Directly mounted onto wall or pole BPEO evolution organiser and cassettes Discrete Accessibility No fi xing bracket required Standard organiser and cassettes to facilitate delivery management of all 3M housings Technical Information Dimensions (mm) Height: 213 Width: 240 Depth: 73 Materials: Thermoplastics Colour: Light Grey RAL 7035 Degree of Protection: IP 44 / IK 06 Dielectric strength for Greater than 4 kv fixing on common supports Cable entries / Anchorage in bottom box entrance. Capable of mid span access cables. Anchorage and sealing for 1 to 2 feeder cables and 12 subscriber drops Fibre Distribution Terminal PBO NG T1 Supplied without cassette N501733A 5 Plastic mounting bracket (need 1) N711608A 2 27

28 Fibre optic Solutions FTTX Solutions 3 Distribution Access Network Solutions FTB (Fiber Terminal Box) The FTB is an optical fi bre distribution housing It is designed for FTTH applications on walls or on posts. This housing has 4 entries. It may also be equipped with a cassette for the management of splices or supports for SC or LC connections. The FTB offers the possibility of a confi guration as 6 SC connectors or 6 Duplex LC. It is compatible with NPC connectors. For locking mechanism, contact 3M. Housing supplied without connectors, NPC connectors or jumpers Max capacity: 12 fi bres Cable diameter: up to 12.5 mm Configuration: - 2 x 12.5 mm ports - 2 x 1.2 mm ports Sealing: No ECAM, no grommets Characteristics 2 large diameter 12.7 mm ports 2 small diameter 3.2 mm ports Elastomeric material port Support for SC and LC connections 1 tray holder Technical Information Dimensions: 130 x 190 x 45 mm Advantages Compatible with standard diameters of cable and jumpers Compact Sealed without grommets or mastic Compatible with NPC fi eld connectors LC and SC 3M Splitter or Incoming fi bre splicing Materials: Polycarbonate housing EPDM port Colour: RAL 7035 Sealing: IP 54 Impact: Fire: IK08 UL 94 5V Empty FTB distribution housing FTB-M 1 Fibrlok mechanical splices and NPC connectors see pages 38 to

29 4 Solutions for Building Distribution 4.1 Building Entry Solutions PBO Size 2 The PBO size 2 is a box for service riser connection. It is used for connection to the riser cable as a direct or mid span to feed one or more other boxes in a cascade arrangement. Its capacity is 144 fusion splices. Its organiser is of the BPEO Evolution 12 SLOT type as standard with management for fi bre units and couplings. Max capacity: 144 fi bres Cable diameter: 4 to 12 mm Configuration: - 1 service cable including passage - 16 branch cables (drops) 4 break thru ports for direct mounting on wall or for 2 mounting brackets Characteristics Internal/external multi-purpose product Body cover with hinge opening 120 BPEO Evolution 12 SLOT Organiser Anchorage of drops using ties Possibility of cable passage Splitter management Fusion and mechanical splices Installation on walls, on pole, indoor, outdoor Components for diameter from 4 to 12 mm Advantages One product for several applications Compact base of building unit Up to 144 fusion splices Robust product Allows distribution on cable or directly using drops Technical Information Dimensions (mm) Height: 400 Width: 255 Depth: 86 Anchorage of cables Anchorage strap for service cables and branch cables. Tie fi xings. Materials: Thermoplastics Degree of protection (EN ): IP55 / IK 06 Colour: Cover light grey Ral 7035 Body dark grey Ral 7037 Capacity: Fusion splice 144 with 12 per 1-step cassette Fibrlok splice 4 x 4 72 with 12 per 2-step cassette Splitter 6 x 1/8 or 3 x 1/16 or 2 x 1/32 Configuration: 1 service cable including as passage 16 branch cables (drops) Fixing: Wall mounting using 4 screws diameter 6 mm (not supplied) Using a strap (20 x 0.7 mm) Base of building housing PBO S2 12 SLOT N501659A 1 Plastic fi xing supports (need 2) N711608A 2 Fibrlok mechanical splices and NPC connectors see pages 38 to 42 29

30 Fibre optic Solutions FTTX Solutions 4 Solutions for Building Distribution edb² Max capacity: 24 SC simplex connections Configuration: Empty housing to receive equipment for a high degree of modularity Fitting: As cascade or in line Option to use as shared distribution point The edb² is a fi bre optic distribution box designed for installations at the base of buildings and on fl oor landings. This housing is modular and has a wide range of accessories in order to meet the needs of various fi breoptics applications The edb² is an ideal FTTH distribution point with its 48-fi bre capacity. It is also suitable to create a multi-operator mutualisation point. Equipped with the BPEO organiser, this product provides a management system for mechanical splices and splitters. This housing is made up of 2 separate compartments to ensure the best possible protection for splices and splitters. It may also be equipped with SC/APC connection systems and with drops. The edb² offers the option of installation in the form of a cascade. The in-line confi guration meets high-capacity fi bre requirements. edb² Base Assembly 2 x Patch fi eld 12 x SC 2 x Cable Entry 10x5mm 1 x Splitter holder 2 x PAS II empty 2 x Splice Holder Heat shrink 2 x Splice Holder Crimp 4 x Strain Relief black 2 x Label 1-12 und x Flex Bridge 1 x Inner Cover incl. holder etc. Accessory Pack 1 1 x 6 x 13 Cable Entry 1 x Cable Slack Drum 1 x Rear Entry Accessory (Drop fix) 50 x Dropfi x Characteristics High degree of modularity for use internally or externally Organiser with swivel cassette Organiser with area for storage of ready fi bre Device for immobilisation of the cable/tubes and drops Wall mounting Advantages Product suitable for various applications Ease of access to every fi bre Distinction of active and passive fi bres Excellent cable support Technical Information Characteristics FO Capacity Cassettes Fusion splices 48 4 Mechanical splices 24 4 Cable 20 drops with a maximum diameter of 5 mm 2 main cables with a maximum diameter of 13 mm Dimensions (mm) Height: 320 Width: 248 Depth: 50 Materials: Thermoplastics Colour: Body and cover Ral 7035 Degree of protection (EN 6529): IP 55 / IK 06 edb² Base Assembly ea Accessory Pack ea Accessory (Dropfi x) ea 30 For individual project adaptations of the edb 2 please contact your local 3M representative.

31 4 Solutions for Building Distribution 4.2 Building Floor Solutions PBPO 24 NG Symetric Max capacity: 48 fi bres Cable diameter: 4.5 to 13.5 mm Configuration: 12 ports for 12 to 24 branched cables Immobilisation: Using ties Floor Box The PBPO 24 is a genuine interface between vertical distribution and subscriber connection cables. Installation on standard cables and window cut riser cables. Composition: A zone in which the vertical cable passes, with two anchorages A zone for coiled stowage of fi bres and microtubes, passing or awaiting use A BPEO Evolution generation 4-step organiser A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters Capacity from 12 to 48 splices The PBPO 24 The PBPO 24 is equipped with 12 ports for 12 to 24 drop cables. The cables are anchored on external pin brackets in front of the sealing partition, using ties. Characteristics Advantages Compact housing, sliding cover Double anchorage of the main cable Large stowage area for microtubes and fi bres BPEO evolution type organiser 4-slot capacity Riser pathway left and right Exposed or service riser mounting Mounting on stretched cable, standard cable as spur, or junction of two cables Management of non-sleeved fi bres, no re-tubing Large number of possible cassette combinations For any riser confi gurations Technical Information Dimensions (mm) Height: 204 Width: 158 Depth: 52 Materials: Thermoplastics Colour: White Degree of Protection: IP 40 / IK 08 Allowable cables: Mounting on stretched cable, standard cable as spur, or junction of two cables Allowable cable diameters - Main: 13.5 mm - Branch: 4.5 mm Cable immobilisation: Main: on 2 cradles (2 ties + 2 force restraints) Branches: 12 entry ports with exterior immobilisation using ties for 1 or 2 branch cables Connections: 4-step organiser to accept the entire range of BPEO cassettes Management of non-sleeved fi bres Large storage zone for fi bres and micro-tubes Maximum capacity 48 fusion type splices PBPO 24 NG Symetric - External drops immobilisation N501758A 10 Kit backmount plate N711833A 10 Protection Cover N681288T 10 31

32 Fibre optic Solutions FTTX Solutions 4 Solutions for Building Distribution PBPO/C NG Symetric Interior connection housing The PBPO/C is a genuine interface for connection between a vertical distribution unit and equipment Installation on standard cables and window cut riser cables. Composition: A zone in which the vertical cable passes with two anchorage points A zone for coiled stowage of fi bres and microtubes passing or ready for use A BPEO Evolution generation 4-step organiser A choice of cassettes for fusion- or mechanical splices or for splice-in PLC splitters Supplied without connectors Capacity from 12 to 48 splices Support plate for 16 connectors of connection type SC/PC or SC/APC Max capacity: 48 fi bres Cable diameter: 13.5 mm for main cable 4.5 mm for branched cable Configuration: For 16 SC simplex couplings Immobilisation: Using ties Characteristics Compact housing, sliding cover Double anchorage of the main cable Large storage area for microtubes and fi bres BPEO evolution type organiser 4-slot capacity Riser pathway left and right Advantages Exposed or service riser mounting Mounting on stretched cable, standard cable as spur, or junction of two cables Management of non-sleeved fi bres, no retubing Large number of possible cassette combinations For any riser confi guration Technical Information Dimensions (mm) Height: 204 Width: 158 Depth: 52 Materials: Thermoplastics Colour: White Degree of Protection: IP 40 / IK 08 Allowable cables: Mounting in stretched cable, standard cable as spur, or junction of two cables Allowable cable diameters - Main: 13.5 mm - Branch: 4.5 mm Cable immobilisation: - Main: on 2 cradles (2 ties + 2 force restraints) - Branched: 16 entry ports with exterior immobilisation using ties for 1 or 2 branch cables Connections: 4-step organiser to accept the entire range of BPEO cassettes Management of non-sleeved fi bres Large storage zone for fi bres and micro-tubes Maximum capacity 48 fusion type splices PBPO/C NG Symetric N501760A 10 Kit backmount plate N711833A 10 Protection Cover N681288T 10 32

33 4 Solutions for Building Distribution 4.3 Solution for Living Units Wall Outlet 4 Fibres The wall outlet 4 fi bres is the latest development of our terminal points for subscribers, specifi cally designed for connection of subscribers in very dense zones. Reduced format for installation of 1 to 4 optic ports of type SC. Installation inside the communications panel or wall mounting inside the accommodation. Base unit provided with four side access points for connection cable, plus rear access for the entry through fl ush mounted housing. Oultlet for communications panel or wall mounting Max capacity: 4 fi bres Connection system: SC/APC Coupling type: SC/APC shuttered couplings Configurations: - Outlet with 2 pre-terminated SC/APC connectors/couplings to a 2 fi bre cable - Outlet with 2 pre-terminated SC/APC connectors/couplings to a 4 fi bre cable - Outlet with 4 pre-terminated SC/APC connectors/couplings to a 4 fi bre cable - Outlet with 4 SC/APC couplings and 2 SC/APC pigtails - Outlet with 4 SC/APC couplings Design: compact Characteristics Dimensions : 100 x 82.5 x 30.8 mm Vertical or horizontal attachment on DIN rail Fibre central protection cover (network side) Management of fi bre optics in a cassette Removable cassette with built-in cable immobilisation and connector supports of the 4 connectors and of the connector for the client lead using peripheral cover Identifi cation of the subscriber connection by protected label beneath transparent fl ap Fixing strip Advantages Compact housing with protected connections Ease of integration into all types of communications panel Differentiated access for installation and operation Multiple use capabilities: cables ready-fi tted with connectors, fi eld connectors, mechanical or fusion splices Improved reliability through protection of the connection and total protection of the connectors. Technical Information Dimensions (mm) Height: 82.5 Width: 100 Overall thickness: 30,8 Thickness / Rail : 25 Materials: Thermoplastics Colour: White- RAL9010 Connection system: SC/APC Splice support: For 4 mechanical splices, fusion splices or both 33

34 Fibre optic Solutions FTTX Solutions 4 Solutions for Building Distribution Technical information (cont) Content of the delivery: Base, cassette, central cover, peripheral cover, strip, cable anchoring fi xtures, labelling Stowage: 1metre of 250 µm or 900 µm fi bre Wall fixing 3 fi xing options Directly using 2 screws (not supplied) Clip fi xing onto the small strip, fi xed to the wall using 2 screws Screwed fastening onto a fl ush-mounted housing Protection index: IP40 Connection protection: The connectors and terminals are protected by the cover Standard connection with pigtails and splices or use of FMC type fi eld connection system (Field Mountable Connector) or use of pre-terminated cables with connectors ready-fi tted. Use as 1, 2, or 4 SC/APC connection For fusion- or mechanical splices Wall outlet equipped with 4 shuttered SC/APC couplings N501689A 10 Wall outlet equipped with 4 shuttered SC/APC couplings and 2 SC/APC pigtails Wall outlet equipped with 4 shuttered SC/APC couplings with 4 pre-terminated SC/APC connectors to a 4 fi bre cable, 25 m Wall outlet equipped with 4 shuttered SC/APC couplings with 4 pre-terminated SC/APC connectors to a 4 fi bre cable, 40 m Wall outlet equipped with 4 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 4 fi bre cable, 25 m Wall outlet equipped with 4 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 4 fi bre cable, 40 m Wall outlet equipped with 2 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 2 fi bre cable, 25 m Wall outlet equipped with 2 shuttered SC/APC couplings with 2 pre-terminated SC/APC connectors to a 2 fi bre cable, 40 m N501677A 10 N501762A 1 N501763A 1 N501680A 1 N501681A 1 N501682A 1 N501683A 1 34

35 4 Solutions for Building Distribution Wall Outlet 2 Fibres The 83 x 106 is used as an interior derivation and terminaison box. Installation inside the communications panel or wall mounting inside the accommodation. Base unit provided with three side access points (5 in the branch/transition version) for connection cables, plus rear access for the entry through fl ush mounted housing. Wall fi xing. Outlet for wall fi xing. Capacity: 2 fi bres Design Connection system: SC APC Configurations: Equipped with a shuttered coupling Equipped with 2 shuttered couplings Equipped with 2 shuttered couplings and 1 pigtail Characteristics Format 106 x 83 x 24 mm Management of fi bre optics using cassettes Designed for 3 types of use: Terminal point, branch housing or transition 2 labelling zones Technical Information Advantages Compact housing Swivel cassette for fusion and mechanical splices Multi-purpose Differentiated zones for the operator logo and the subscriber's number Description: Wall Outlet 2 FO Dimensions (in mm) Height: 83 Width: 106 Overall thickness: 24 Materials: Thermoplastics Colour: White- RAL9010 For subscriber cable max diameter 6 mm Connection: 2 optical connections to SC/APC standard Splice support: For 2 mechanical splices or 4 fusion splices Make-up of equipment supplied: Base, cassette, cover, cable immobilisation Stowage: 1 metre of 900 µm fi bre Fixing: Wall mounted or on fl ush-mounted housing using 2 screws Protection index: IP40 Port protection: SC/APC shuttered couplings Wall Outlet 2 FO equipped with a shuttered coupling N501752A 24 Wall Outlet Point equipped with 2 shuttered couplings N501753A 24 Wall Outlet 2FO equipped with 2 shuttered couplings and 1 pigtail N501754A 24 35

36 Fibre optic Solutions FTTX Solutions 4 Solutions for Building Distribution 4.4 FTTH Wall Outlets 3M 8686 FTTH Wall Outlet The 8686 FTTH Wall Outlet is a universal access point for FTTH end user installation. This outlet is designed to match with new generation of fi eld mountable connectors like 3M No Polish Connectors (NPC). Field mountable connector termination in the 8686 outlet avoid installing a fi ber storage tray and splicing. Alternatively, the splicing of pigtails and the storage of splices, either fusion or 3M Fibrlok mechanical splices is designed into the concept. On the wall cable entry is possible from either the sides or from the top of the outlet. The 8686 outlet can be mounted on the wall or on underwall 60 mm boxes. Up to 4 SC simplex couplings can be mounted if used with G.657.A bend insensitive fi bre. Specifications Dimensions: Capacity: 86 x 86 x 35 mm (WxLxD) 4 x SC simplex (G.657.A fi bre) 2 x SC simplex (G.652.D fi bre) 2 x LC duplex (G.657.A fi bre) Connectivity: Cable: Cable entry: Fixation: Additional features: 3M NPC connectors or 900 µm pigtails FRP drop cable or round cable 4-6 mm Backside or all vertical and horizontal sides Holes for screw fi xing (60 mm distance) Splice holder for mechanical or heatshrink fi bre splices Keystone port for Kat 5 jack Fibre Optic Wall Outlet 4 x SC simplex with Keystone Port for RJ45 Jack

37 4 Solutions for Building Distribution 3M VOL-0256-C FTTH Wall Outlet The VOL-0256-C FTTH Wall Outlet is a universal access point for FTTH end user installation which has integrated dust shutters. This outlet is designed to match with new generation of fi eld mountable connectors like 3M No Polish Connectors (NPC). Field mountable connector termination in the VOL-0256-C outlet avoid installing a fi ber storage tray and splicing. Alternatively, the splicing of pigtails and the storage of splices, either fusion or 3M Fibrlok mechanical splices is designed into the concept. On the wall cable entry is possible from either the sides or from the top of the outlet. The outlet can be mounted on the wall or on underwall 60 mm boxes. Up to 2 SC simplex or 2 LC duplex couplings can be mounted inside the keystone adapters if used with G.657.A bend insensitive fi bre. Specifications: Dimensions: 86 x 86 x 27 mm (W x L x D) Capacity: 2 x SC simplex (G.657.A fi bre) 2 x LC duplex (G.657.A fi bre) Connectivity: Cable: Cable entry: 3M NPC connectors or 900 µm pigtails FRP drop cable or round cable 4-6 mm Backside or all vertical and horizontal sides Fibre Optic Wall Outlet 2 x SC simplex with Keystone Adpater and Dust Shutters VOL-0256-C 20 37

38 Fibre optic Solutions FTTX Solutions 5 FTTH Connectivity 5.1 NPC Connectors Quick and Easy connectivity for the Last Mile Pre-assembled mechanical splice-on connectors 3M No Polish Connectors (NPC) 3M No Polish Connectors (NPC) help enable fast, on-site installation of 250 µm, 900 µm and jacketed single-mode and multimode fi ber and cable One piece, pre-assembled design Factory polished, no fi eld polish Integrated mechanical splice element No loose parts Ideal for FTTP drop termination Quick installation no electrical power Activation tool included Integrated strain relief for 900 µm buffer SC/APC and LC/APC also available with fl at or keyed angle splicing Re-opening tool incl. for reusability Training videos online Compatible with common SM fi bres (ITU.G652.D, G657A) NPC UPC - Specifications Multimode /LOMMF Insertion loss Typical at 1300 nm 0.2 db 0.2 db 0.2 db 0.3 db Single-mode 8800 Reflection typical at room temp 23 C (73 F) (db) < -30 db < -30 db < -25 db < -40 db Connector durability < 0.1 db change after 500 matings < 0.1 db change after 500 matings < 0.1 db change after 500 matings < 0.2 db change after 100 matings Operating temperature -40 C to 75 C -40 C to 75 C -40 C to 75 C -40 C to 75 C Cable tension (in service) Straight pull Side pull < 0.1 db increase at 2.2 N for 900 µm < 0.1 db increase at 2.2 N for 900 µm < 0.1 db increase at 2.2 N for 900 µm < 0.1 db increase at 2.2 N for 900 µm < 0.1 db increase at 2.2 N for 900 µm < 0.1 db increase at 2.2 N for 900 µm < 0.5dB increase at 6.9 N for 900 µm* < 0.1 db increase at 2.2 N for 900 µm* Material Connector ferrule Connector housing and body Boot Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Zirconia ceramic Engineered resin Thermoplastic elastomer Flame retardancy UL-94 V-O UL-94 V-O UL-94 V-O UL-94 V-O Connector identification Backbone Housing Boot Black Black White Black Aqua White Black Beige White Black Blue White Field termination kit (no power needed) 8865-C 8865-C 8865-C 8865-C The SC MM NPC meets EIA/TIA and IEC requirements. * Connectors tested under load 38

39 5 FTTH Connectivity NPC APC - Specifications Fiber diameter: 125 µm Insertion loss: 0.3 db typical Reflection (Flat splice): -55 db typical at room temperature < -35 db for -40 C to 75 C (Angle splice): -65 db typical at room temperature < -60 db for for -40 C to 75 C Connection durability, after 100 matings: < 0.2 db change Operating Temperature: -40 C to 75 C (8832-APC -10 C to 60 C) Cable tension (In service): < 0.5 db increase at 4.9N for 250 µm < 0.5 db increase at 6.9N for 900 µm Side Pull (In service): < 0.5 db increase at 6.9N for 900 µm Water immersion, 43 C (109 F), 3 days: < 0.2 db increase after 24 hour dry time Dimensions: 12.7 x 12.7 x 49 mm SC/APC SM 9/125 µm NPC Connector 250/900 µ, Angle Splice, incl. tool 8800-APC/AS 60 SC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8800-APC/FS 60 SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Flat Splice SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Angle Splice 8802-T/APC/ FS/ T/APC/ AS/ LC/APC SM 9/125 µm NPC Connector 250/900 µ, Angle Splice, incl. tool 8830-APC/AS 60 LC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8830-APC/FS 60 LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket, Flat Splice 8832-APC/AS 60 LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket, Angle Splice 8832-APC/FS 60 MOQ of all types is 60 each including one activation tool M No Polish Connector Termination Kit 8865 and 8865-C Enables fast, on-site installation of NPC Connectors on 250 µm, 900 µm and jacketed singlemode and multimode fi ber cable Low cost kit with or without cleaver 3M Angle Splicing Kit 2565 for NPC Connectors and Fibrlok Splices Enables fast, on-site installation of NPC/APC Connectors on 250 µm and 900 µm singlemode and multimode fi bre with angle splicing Kit contains angle cleaver and splicing tools for keyed angle splicing No Polish Connector Preparation Kit with Cleaver 8865-C 1 No Polish Connector Preparation Kit without Cleaver Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave Tool MOQ for all Kits is 1 each. 39

40 Fibre optic Solutions FTTX Solutions 5 FTTH Connectivity 5.2 Crimplok + Connectors Quick and Easy connectivity for the Last Mile No Splice - No Gel mechanical grip-on connectors 3M Crimplok + Connectors 3M Crimplok + Connectors help enable fast, on-site installation of 250 µm and 900 µm singlemode and multimode fi ber and cable One piece, pre-assembled design No splice - No gel Integrated mechanical grip element No loose parts Ideal for FTTP drop termination Quick installation no electrical power Quick fi eld polish with Nano Finisher Polishing fi lm comes with each connector Activation tool included SC/PC and SC/APC Training videos online Compatible with all SM fi bres 3M Crimplok + Connector Specifications MM MM /LOMMF MM SM 8700-UPC / 8700-APC Reflection (db) < -30 < -30 < -30 < -40 (UPC) / <-60 (APC) Connector durability, after 500 matings < 0.1 db change < 0.1 db change < 0.1 db change < 0.2 db change Operating temperature -10 C to 60 C -10 C to 60 C -10 C to 60 C -40 C to 75 C Cable tension (in service) Straigh pull Side pull < 0.1 db increase at 5 N for 900 µm < 0.1 db increase at 2 N for 900 µm < 0.1 db increase at 5 N for 900 µm < 0.1 db increase at 2 N for 900 µm < 0.1 db increase at 5 N for 900 µm < 0.1 db increase at 2 N for 900 µm < 0.5 db increase at 6.9 N for 900 µm < 0.5 db increase at 6.9 N for 900 µm Connector identification Housing/Boot Black/White Aqua/White Beige/White Blue/White (UPC) Green/White (APC) Field termination kit (no power needed) 8765-UPC 8765-UPC 8765-UPC 8765-UPC (UPC) 8765-APC (APC) Crimplok + Connector SC/UPC, SM, 900 µm, (60ea) with PS Tool 8700-PS/UPC 60 Crimplok + Connector SC/APC, SM, 900 µm, (60ea) with PS Tool 8700-PS/APC 60 MOQ of Crimplok + Connectors is 10 each (excl. PS tool) or 60 each (incl. PS tool). 40

41 5 FTTH Connectivity 3M Crimplok + Termination Kits Enable fast, on-site installation of 250 µm and 900 µm singlemode and multimode fi bre Special kits for SC/PC and SC/APC Standard fl at cleaver Nano Finisher included Protrusion setting tool (PS tool) included Crimplok + SC/UPC Connector Kit 8765-UPC 1 Crimplok + SC/APC Connector Kit 8765-APC 1 MOQ of all Crimplok + Termination Kits is 1 each 41

42 Fibre optic Solutions FTTX Solutions 5 FTTH Connectivity 5.3 Fibrlok Mechanical Splices Quick and Easy splicing for the Last Mile 3M Fibrlok Mechanical Splices 3M Fibrlok Mechanical Splices help enable fast, on-site splicing of 250 µm and 900 µm single-mode and multimode fi ber One piece, pre-assembled design Splice element compensates fi bre OD tolerances Flat - and angle splice version for high return loss Quick and easy installation Two different sizes 4 x 4mm and 4 x 6mm Simple and low cost tooling for fl at and keyed angle splicing Online training videos 20 years fi eld experience with 15 million installed splices Losses equivalent to fusion splicing Specifications Fiber diameter: 125 µm Coating diameter: 250 or 900 µm Mean insertion loss: < 0.1 db Reflectance: < -35 db from -40 to 80 C < -60 db typical at room temperature Tensile strength: 4.4N minimum; 13.2N typical Material: Engineering thermoplastic with aluminium alloy element; UL 94, V-O rating Operating temperature: -40 to 80 C Thermal cycling: Change in insertion loss < 0.5 db, -40 to 80 C Fungus resistance: ASTM G-21-70; rating 0 Vibration: IEC (EIA standard FOTP-11; test condition 1) Water immersion: Seven days at 43 C; change in insertion loss 0.05 db; 21,000 hours with < 0.2 db change Extended high humidity: 8,812 hours at 85 C, 85% humidity with < 0.2 db change Fibrlok II Universal Flat Fiber Splice, 250 µm and 900 µm (4 x 6 mm) Fibrlok II Angle Fiber Splice, 250 µm and 900 µm (4 x 6 mm) 2529-AS 60 Fibrlok 250 µm Flat Fiber Splice (4 x 4 mm) 2540-G 60 Fibrlok 250 µm Angle Fiber Splice (4 x 4 mm) 2540-AS 60 MOQ for all Fibrlok splices is 60 each 3M Fibrlok Preparation Kits 3M Fibrlok Preparation Kits help enable fast, on-site splicing of 250 µm and 900 µm singlemode and multimode fi ber with Fibrlok splices. Low cost tool kits with or without fl at cleaver Actuation tools for both Fibrlok types included 42 Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501, 2504-G and Fibrlok samples Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501, 2504-G and Fibrlok samples MOQ of all Fiberlok + Termination Kits is 1 each C

43 5 FTTH Connectivity 5.4 Fibrlok Indoor FRP Splice Connector Quick and Easy splicing of FRP drop cable 3M 2569 Indoor FRP Splice Connector 3M 2569 Indoor FRP Splice Connector help enable fast, on-site splicing of 2 x 3mm FRP 1 fi bre indoor drop cable One piece, pre-assembled design Splice element compensates fi bre OD tolerances Flat- and angle splice version for high return loss Quick and easy inline splicing of 2 x 3mm FRP drop cable Perfect strain relief due to aramide clamping Two colours, grey and ivory Specifications Appplication: Indoor application Dimensions: 9 x 82 mm (Ø x L) Cable type: Suitable for 2 x 3 FRP cable Insertion loss: 0.1 db typical Reflection: -40 db typical at room temperature Cable retention force: > 40N Operating temperature: -20 to 60 C Temperature cycling: -40 C ~ +85 C, 21 cycles, 168h, online test, IL change 0.1 db Salt Spray: 5% NaCl, +35 C, 48 h, IL change 0.1 db Vibration: Amplitude 1.5 mm, 10 Hz - 55 Hz, 3 axis, 2 hours per axis, 45 Hz sweep, IL change 0.1 db Impact: Height: 1.5 m, 8 times drop test, IL change 0.1 db Compression: Load: 5 N, Load time: 1 min, IL change 0.1 db Torsion: Load: 15 N; 10 times per minute, 100 times, IL change 0.1 db Tension: 20 N, online test, 40 N, offl ine test, last for 2 mins, IL change 0.1 db Re-open: 5 times, IL change 0.1 db FRP Splice Connector (Ivory) FRP Splice Connector (Grey) MOQ for all FRP Splice Connectors is 100 each. 43

44 Fibre optic Solutions FTTX Solutions 5 FTTH Connectivity 5.5 3M One Pass Mini Fibre Pathway LSZH 3M One Pass Mini Fiber Pathway is designed for use in brownfi eld Multi Dwelling Units (MDUs) or Single Family Units (SFUs) serviced by FTTH networks Also suitable for hotels, schools, hospitals, and small businesses The One Pass Mini pathway is a single fi ber fl exible, surface-mount cable pathway and drop cable solution installed in just one pass Used to connect to hallway distribution cables from a point-of-entry location near an apartment door to a wall outlet in the living unit positioned near an ONT Utilizes 3M adhesive technology to adhere duct to wall Compatible with a variety of wall surfaces 3M One Pass Mini Fibre Pathway Duct Suitable for indoor use only as LSZH material Low smoke zero halogen construction Feature Benefit 3M One Pass Small Surface-Mount Point-of-Entry Box SM-SMALL-POE-10-IV and 3M No Polish Connector 8800-APC/AS One Pass Mini pathway is low profi le and less obtrusive than existing drop cable solutions One Pass Mini pathway facilitates use of small desktop ONTs 3M One Pass Mini Fiber Pathway Duct was designed to work on concrete walls where stapling ruggedized drop cables isn t an option Use of adhesive technology to mount One Pass Mini Duct enables quiet installation, maintains signal integrity, and eliminates marks left on ceilings from staple guns One Pass Mini has few pieces to install One Pass Mini pathway is compatible with the 3M One Pass Fiber Pathway for horizontal cable applications Duct can be cut to needed length and quickly and easily fi eld terminated with 3M No Polish Connector Respects apartment aesthetics; a unique cable pathway solution for high-end apartments where exposed cables are not acceptable to tenants, increasing service provider revenue opportunities Virtually eliminates time and expense of running new wiring (electrical, RJ-11, coax) to closets where large wall mount ONTs are typically placed Apartments with concrete walls can now be wired for FTTH services quickly and cost effectively, increasing potential revenue for the FTTH service provider Provides minimally disruptive customer installation experience and preserves apartment aesthetics while reducing potential for macrobends and high attenuation that may be caused by stapling Installation is easy, training crews takes less time and is less costly than some traditional methods; eliminates time spent loading/unloading staple guns needed for stapling ruggedized drop cables Final drop cable installation time is signifi cantly reduced, and customer installation time diminished Limits fi ber waste and large boxes designed to store excess cable slack. Expensive and time consuming fusion splicing machines are no longer needed for terminations 44

45 5 FTTH Connectivity 3M One Pass Mini Fibre Pathway Apartment Layout and Product Placement Illustration Bedroom Living Room Coax RJ-11 Electrical LC 3M One Pass Fibre Pathway or Alternative Horizontal Cable Pathway Solution 3M One Pass Mini Fibre Pathway 3M One Pass Mini Fibre Pathway Duct LSZH One Pass Mini LSZH One Pass 2 Fiber Mini LSZH One Pass 4 Fiber Mini Number of Fibers Fiber coating 900 µm 250 µm 250 µm Fiber coating color white blue, orange Fiber type Jacket material Jacket colour Jacket paint ability Ultra bend insensitive fi ber (ITU G.657.B3) Low smoke zero halogen polyolefi n Ivory Paintable with either latex or oil based paint blue, orange, green, brown Flammability Fiber pathways has been tested to the requirements of IEC and IEC , with modifi ed test procedures. Note 1 LSZH Fiber pathways have been tested to the requirements of IEC Installation Temperature 16 C to 38 C and 30-50% relative humidity. Notes 2,3 Storage Temperature The product should be stored at 4 C to 38 C and 0-95% relative humidity. The optical product storage conditions are 22 C and 50% relative humidity. Failure to properly store the product may void the product warranty. Operating Temperature 4 C to 38 C and 0-95% relative humidity UV Resistance Installed duct tested to indoor UV requirements of ASTM G 154 Notes 1 Since this product is designed to be affi xed to a wall in application, the fi ber pathway was tested pursuant to IEC and IEC after being adhered to a sheet rock wall or a metal strip. 2 Allow fi ber pathways and accessories to acclimate for 24 hours at recommended product installation temperature prior to install. 3 For optimum curing of the adhesive, hold recommended installation temperature conditions for 72 hours after. 900 µm Ultra Bend Insensitive Fibre (G.657.B3) 0.32" (8.1 mm) 1 Fibre Duct 0.13" (3.4 mm) 3M Adhesive 45

46 Fibre optic Solutions FTTX Solutions 5 FTTH Connectivity 3M One Pass Mini Fibre Pathway Duct Wall Surface Compatibility Test Results Wall Surface Type Pass Painted Smooth Surfaces Flat Latex Semi-gloss Latex Glossy Latex Semi-gloss Alkyd Yes Yes Yes Yes 3M One Pass Mini Surface-Mount Point-of-Entry Wall Cover Painted Textured Surfaces: Light Stucco & Cement Block Flat Latex Semi-gloss Latex Glossy Latex Semi-gloss Alkyd Wallpapered Surfaces Plain Paper Vinyl Coated Vinyl Polyolefi n Woven Unfinished and/or Unpainted Brick, Concrete, or Block Yes Yes Yes Yes Yes Yes Yes No No 3M One Pass Mini Surface-Mount Wall Outlet 3M One Pass Mini Fibre Pathway Duct ONE PASS MINI DUCT LSZH 100 m NO TERM ILU LS 1 Spool ONE PASS MINI DUCT LSZH 100 m 2 fi bres NO TERM ILU LS 1 Spool ONE PASS MINI DUCT LSZH 100 m 4 fbres NO TERM ILU LS 1 Spool 3M One Pass Mini Surface-Mount Wall Outlet and 3M No Polish Connector 8800-APC/AS 46

47 5 FTTH Connectivity 3M One Pass Mini Fibre Pathway Product Accessories One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02-SCA-IV 60 One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02-SCU-IV 60 One Pass Mini Surface-Mount POE Wall Cover ILU-SM-POE-WC-IV 60 One Pass Mini Planar Corners, 12 Corners Per Bag ILU-PLN-12-IV 60 One Pass Mini Mechanical Anchor, 12 Per Bag ILU-ANCHOR-12-IV 60 One Pass Mini Exterior Corner Supports, Formed (Metal), 12 Per Bag ILU-EXT One Pass Mini Bridge Strip 31 cm Long 60 Per Kit ILU-BRIDGE One Pass Mini Duct Installation Tool ILU-DUCT-INSTALL-TOOL 4 One Pass Mini Duct Flange Removal Tool ILU-DUCT-CHOMPER-TOOL 4 One Pass Mini Installation Tool Kit, ILU ILU-TOOL-KIT 1 Kit ILU Fiber Repair Kit ILU-REPAIR-KIT 1 ILU Wall Surface Compatibility Test Kit ILU-TEST-KIT 1 One Pass Surface-Mount Point-of-Entry Box SM-POE-10-IV 60 One Pass Small Surface-Mount Point-of-Entry Box SM-SMALL-POE-10-IV 60 3M No Polish Connector SC/APC SM Angle Splice 250/ APC/AS 60/Package 3M No Polish SC Connector SM Plug 250/900 (blue housing) /Package Fiber Optic Angle Cleave Kit with Angle Cleaver /Package Fiber Optic Angle Cleaver /Package Fiber Optic Flat Cleaver /Package Optical Terminal Box with 2 SC adapters N501688A 10 Optical Terminal Box with 4 SC adapters N501689A 10 47

48 Fibre optic Solutions FTTX Solutions Index Description Reference No. Page RFO NG - Pre wired module 12 SC/APC G652D N541133A 11 RFO NG - Pre wired module 12 SC/UPC G652D N541181A 11 RFO NG Symetric - Prewired Module 12 SC/APC G652 N541193A 11 RFO NG - Pre wired module 12 SC Multi-mode OM3 N541199A 11 RFO NG m reel of tube D5/3 N581203A 11 RFO NG - 25 m reel of tube D5/3 N581207A 11 Protective patchcord holder for RFO NG symetric tray N671317A 11 RFO NG - Breakout Housing DEECAM D18 for 24 D5/3 N711547A 11 RFO NG - Breakout Housing DEECAM D25 for 60 D5/3 N711597A 11 RFO NG - 12-drawer chassis 144 fi bres (without module) N711747A 11 RFO NG - 6-drawer chassis 72 fi bres (without module) N711748A 11 RFO NG - Frame 3.25 m - 11 levels N801584A 11 RFO NG - Frame 2.00 m - 6 levels N801585A 11 RFO NG - Frame 2.50 m - 8 levels N801595A 11 MODF 2K-19 chassis, 3U MODF 2K-Tray 19, 1U, tube management MODF 2K Cover 3U, 7TE MODF 2K-Horizontal guide drawer, 19, 1U MODF Module 2K/7TE-SM-SC/APC G652D MODF Splice module 2K/8TE-24 splices MODF Module 2K/7TE-SM-SC G652D ECAM Single S4-27 for BPEO S4 - One single entry D ECAM Double D4-27 for BPEO S4 - One double entry D BPEO S4 - Dome Sleeve for 864 FO max - One double entry D x single entries D4-27 N501675A 14 BPEO S4 Wall support N711660A 14 BPEO-3 EVOL CDP 48 SLOT Splice protection closure CDP N501494A 16 BPEO-3 EVOL EDP 48 SLOT Splice protection closure EDP N501495A 16 BPEO-3 EVOL BDP 48 SLOT Splice protection closure BDP N501496A 16 Earthing kit for BPE/O N151064A 16,18 BPEO Wall or Pole mounting kit BPEO sizes 2 and 3 N711440A 16,18 BPE/O Sewer type mounting kit sizes 2 and 3 N711546A 16,18 BPEO Wall mounting kit V2 for BPEO size 2 and 3 N711600A 16,18 ECAM Double D5-27 Double cable entry kit with diameter from 5 to 27 mm N721131A 16,18 Coupling holder 6 x SC connectors for BPEO S1, S2, S3 N711604A 16,18,22 ECAM Single S5-18 Single cable entry kit with diameter from 5 to 18 mm N721127A 16,18,20,22 K7-1SLOT-6 Fibrlok 4 x 4-1-step Cassette equipped with a 6 Fibrlok 4 x 4 support N541103A 16,18,20,22,25 K7-2SLOT-12 2-step Cassette for heat shrink fusion splices equipped with a support for 12 fusion splices N541104A 16,18,20,22,25 and PLC splitter K7-1SLOT-12 1-step Cassette for heat shrink fusion splices equipped with support 12 fusion splices N541106A 16,18,20,22,25 K7-2SLOT-12 Fibrlok 2-step 4 x 4 Cassette equipped with a 12 Fibrlok 4 x 4 support N541108A 16,18,20,22,25 K7-2SLOT-10 Fibrlok4 x 4 and splitter 2-step Cassette equipped with a 10 Fibrlok 4 x 4 support N541110A 16,18,20,22,25 K7-1SLOT - For 9 fusion splices and a 4 x 4 type PLC splitter N541113A 16,18,20,22,25 Description Reference No. Page K7-2SLOT-Universal for 12 splices N541121A 16,18,20,22,25 ECAM Single S4-12 Single cable entry kit with diameter from 4 to 12 mm N721126A 16,18,20,22,25 Coupling holder 12 x SC connectors for BPEO S2, S3 N711605A 16,18,22 ECAM Double D5-20 Double cable entry kit with diameter from 5 to 20 mm N721130A 16,18,22 ECAM Extended S12-12 x 1.5 for 12 x 1.5 mm cables N721140A 16,18,22 ECAM Extended S18-7 x 5.5 mm for 7 x 5.5 mm cables N721141A 16,18,22 ECAM Extended S12-10 x 2 mm for 10 x 2 mm cables N721142A 16,18,22 ECAM Extended S12-4 x 4 mm for 4 x 4 mm cables N721146A 16,18,22 BPEO-2 EVOL CDP 28 SLOT Splice protection housing CDP N501491A 18 BPEO-2 EVOL EDP 28 SLOT Splice protection housing EDP N501492A 18 BPEO-2 EVOL BDP 28 SLOT Splice protection housing BDP N501493A 18 K7-1SLOT-2 x 6 fusion splices (twin-zone) designed for fi bre G657 (lot of 12 pcs) N541182A 20,22,25 BPEO FDP Branch N501747A 20 BPEO FDP Drops N501751A 20 Double D6-18 ECAM for cable entry kit Body for housing double cable entry kits N721162A 20,22,25 ECAM Double ECAM D6-9 mm Sealing kit with diameter from 6 to 9 mm N721163A 20,22,25 ECAM Double D9-12 mm Sealing kit with diameter from 9 to 12 mm N721164A 20,22,25 ECAM Double D12-15 mm Sealing kit with diameter from 12 to 15 mm N721165A 20,22,25 ECAM Double D15 to 18 mm Sealing kit with diameter from 15 to 18 mm N721166A 20,22,25 Single ECAM S3-7 Single cable entry kit with diameter from 3 to 7 mm N721171A 20,22,25 Single ECAM S Single cable entry kit with diameter from 3.5 to 9.5 mm N721172A 20,22,25 ECAM Double D18 - D4,5/6 for cable entry kit Body for housing double cable entry kits N721162B 20,25 ECAM Double D4,5-6 mm Sealing kit with diameter from 4,5 to 6 mm N721176A 20,25 BPEO - 1 Evol EOC N501487A 22 BPEO - 1 Evol CDP N501488A 22 BPEO - 1 EDP N501489A 22 BPEO - 1 FDP Drops N501714A 22 BPEO - 1 FDP Branch N501719B 22 BPE/O Pole 1 Wall or Pole mounting kit BPEO size 1 N711438A 22 BPE/O Wall and pole mounting kit V2 for BPEO size 1 N711599A 22 Empty micro-sleeve for passage cable diameter 4.2 mm or 11 mm. Plugs on outlets N501600A 23 Micro-sleeve 24 for passage cable diameter 4.2 mm or 11 mm. 2 off 4 x 2.5 mm outlets N501604A 23 BPEO-0 EVOL Splice Protection Housing N501741A 25 Derivation closure OSSC 121T N501425A 26 Derivation closure OSLC 222 N501426A 26 Derivation closure OSSC 122T N501454A 26 Derivation closure OSC30 N501652A 26 48

49 Description Reference No. Page Fibre Distribution Terminal PBO NG T1 Supplied without cassette N501733A 27 PBO Plastic mounting bracket (need 1) N711608A 27 Empty FTB distribution housing FTB-M 28 Base of building housing PBO S2 12 SLOT N501659A 29 PBO Plastic fi xing supports (need 2) N711608A 29 edb² Base Assembly edb² Accessory (Dropfi x) Contact 3M 30 edb² Accessory Pack 1 Contact 3M 30 PBPO 24 NG Symetric - External drops immobilisation N501758A 31 PBPO Protection Cover N681288T 31,32 PBPO Kit backmount plate N711833A 31,32 PBPO/C NG Symetric N501760A 32 Wall outlet equipped with 4 connectors with fl aps and 2 pigtails N501677A 34 Wall outlet equipped with 4 fl ap connectors on 4fo cable 25 m of which 2fo connect. SC/APC N501680A 34 Wall outlet equipped with 4 fl ap connectors on 4fo cable 40 m of which 2fo connect. SC/APC N501681A 34 Wall outlet equipped with 2 fl ap connectors on 2fo cable 25 m of which 2fo connect. SC/APC N501682A 34 Wall outlet equipped with 2 fl ap connectors on 2fo cable 40 m of which 2fo connect. SC/APC N501683A 34 Wall outlet equipped with 4 connectors with fl aps N501689A 34 Wall outlet equipped with 4 fl ap connectors on 4fo cable 25 m of which 4fo connect. SC/APC N501762A 34 Wall outlet equipped with 4 fl ap connectors on 4fo cable 40 m of which 4fo connect. SC/APC N501763A 34 Wall Outlet 2 FO equipped with a fl ap connector N501752A 35 Wall Outlet Point equipped with 2 connectors with fl aps N501753A 35 Wall Outlet 2FO equipped with 2 connectors with fl aps and 1 pigtail N501754A 35 Fibre Optic Wall Outlet 4 x SC simplex with Keystone Port for RJ45 Jack Fibre Optic Wall Outlet 2 x SC simplex with Keystone Adpater and Dust Shutters VOL-0256-C 37 Fibrlok and NPC Angle Splice Kit with 2535 Angle Cleave Tool No Polish Connector Preparation Kit without Cleaver SC/APC SM 9/125 µm NPC Connector 250/900 µm, Angle Splice, incl. tool 8800-APC/AS 39 SC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool 8800-APC/FS 39 SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Angle Splice SC/APC SM 9/125 µm NPC Connector for 1,6-3,0 mm jacket and FRP, Flat Splice LC/APC SM 9/125 µm NPC Connector 250/900 µm, Angle Splice, incl. tool LC/APC SM 9/125 µm NPC Connector 250/900 µm, Flat Splice, incl. tool LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket and FRP, Flat Splice LC/APC SM 9/125 µm NPC Connector for 1,6-2,0 mm jacket and FRP, Angle Splice 8802-T/APC/ AS/ T/APC/ FS/ APC/AS APC/FS APC/AS APC/FS 39 No Polish Connector Preparation Kit with Cleaver 8865-C 39 Description Reference No. Page Crimplok + Connector SC/APC, SM, 900 µm, (60ea) with PS Tool 8700-PS/APC 40 Crimplok + Connector SC/UPC, SM, 900 µm, (60ea) with PS Tool 8700-PS/UPC 40 Crimplok + SC/APC Connector Kit 8765-APC 41 Crimplok + SC/UPC Connector Kit 8765-UPC 41 Fibrlok II Universal Flat Fiber Splice, 250 µm and 900 µm (4 x 6 mm) Fibrlok Fiber Prep Kit (w/o Cleaving Tool) w/ 2501, 2504-G and Fibrlok samples Fibrlok II Angle Fiber Splice, 250 µm and 900 µm (4 x 6 mm) 2529-AS 42 Fibrlok 250 µm Angle Fiber Splice (4x4mm) 2540-AS 42 Fibrlok 250 µm Flat Fiber Splice (4x4mm) 2540-G 42 Fibrlok Fiber Prep Kit (w/ Cleaving Tool CI-01A), 2501, 2504-G and Fibrlok samples 2559-C 42 FRP Splice Connector (Grey) FRP Splice Connector (Ivory) ONE PASS MINI DUCT LSZH 300 ft NO TERM ILU LS 46 ONE PASS MINI DUCT LSZH 300 ft 2 fi bres NO TERM ILU LS 46 ONE PASS MINI DUCT LSZH 300 ft 4 fbres NO TERM ILU LS 46 One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO- 02-SCA-IV 47 One Pass Mini Surface-Mount Wall Outlet, 2F ILU-SM-WO-02- SCU-IV 47 One Pass Mini Surface-Mount POE Wall Cover ILU-SM-POE- WC-IV 47 One Pass Mini Planar Corners, 12 Corners Per Bag ILU-PLN-12-IV 47 One Pass Mini Mechanical Anchor, 12 Per Bag ILU-ANCHOR- 12-IV 47 One Pass Mini Exterior Corner Supports, Formed (Metal), 12 Per Bag ILU-EXT One Pass Mini Bridge Strip 12.5 Long 60 Per Kit ILU-BRIDGE One Pass Mini Duct Installation Tool ILU-DUCT- INSTALL-TOOL 47 One Pass Mini Duct Flange Removal Tool ILU-DUCT- CHOMPER-TOOL 47 One Pass Mini Installation Tool Kit, ILU ILU-TOOL-KIT 47 ILU Fiber Repair Kit ILU-REPAIR-KIT 47 ILU Wall Surface Compatibility Test Kit ILU-TEST-KIT 47 One Pass Surface-Mount Point-of-Entry Box SM-POE-10-IV 47 One Pass Small Surface-Mount Point-of-Entry Box SM-SMALL- POE-10-IV 47 3M No Polish Connector SC/APC SM Angle Splice 250/ APC/AS 47 3M No Polish SC Connector SM Plug 250/900 (blue housing) Fiber Optic Angle Cleave Kit with Angle Cleaver Fiber Optic Angle Cleaver Fiber Optic Flat Cleaver Optical Terminal Box with 2 SC adapters N501688A 47 Optical Terminal Box with 4 SC adapters N501689A 47 49

50 50 Notes

51

52 Important Notice The mounting and use of the 3M product described within this document assumes that the user has previous experience of this type of product and that it will be assembled by a competent professional. Before any use of this product it is recommended to complete some trials to validate the performance of the product within its expected application. All information and specification details contained within this document are inherent to this specific 3M product and would not be applied to other products or environment. Any action or usage of this product made in violation of this document is at the risk of the user. Compliance to the information and specification relative to the 3M product contained within this document does not exempt the user from compliance with additional guidelines (safety rules, procedures). Compliance to operational requirements especially in respect to the environment and usage of tools with this product must be observed. The 3M Company (who cannot verify or control these elements) would not be held responsible for the consequences of any violation of these rules which remain external to its decision and control. Warranty conditions for 3M products are determined with the sales contract documents and with the mandatory and applicable clause, excluding any other warranty or compensation. 3 3M Telecommunications Europe, Middle East & Africa c/o 3M Deutschland GmbH Carl-Schurz-Str. 1 D Neuss Germany Tel.: ++49(0)2131/ Fax: ++49(0)2131/ Internet: Important Information The details contained in this literature have been carefully prepared from information available to 3M at the time of its production. However, it is not intended to be relied upon for purposes of product specification and you should contact your sales representative if specification details are required. All questions of liability relating to 3M products are governed by the selling 3M subsidiary s Terms of Sale subject where applicable to the prevailing law. 3M and Fibrlok are trademarks of the 3M company. Printed in Germany. 3M Dr. Nr Index c Revision All rights reserved.