Commissioner of Geology and Mining Royalty Pass Application User Manual

Transcription

1 Commissioner of Geology and Mining Royalty Pass Application User Manual Version History Version No. Prepared By Description Date Action n-code First Release 1 th August, 2013 Released (n)code Solutions Page 1

2 DISCLAIMER This technical documentation is being delivered to you n-code and Commissioner of Geology and Mining makes no warranty as to its accuracy or use. Any use of the technical documentation or the information contained therein is at the risk of the user. Documentation may contain technical or other inaccuracies or typographical errors. Commissioner of Geology and Mining, reserves the right to make changes without prior notice. No part of this publication may be copied without the express written permission of Commissioner of Geology and Mining. (n)code Solutions Page 2

3 Index Setting menu... 4 Login menu... 6 Royalty Pass menu... 7 Keypad Functions... 8 Update Application Troubleshooting 11 (n)code Solutions Page 3

4 Setting Steps: (1) Click on setting button (2) User can set URL, APN, Date/Time and Update Application (if available) from setting menu and Close the menu. (3) For setting URL Type URL (cgmatr.ncode.in) in textbox, then click on Save button. (4) For setting APN Click on combo box ->choose network operator To view APN drop down menu Set focus on combo box and press F4 key from keypad To change APN name Click on-> APN textbox ->type APN -> Set APN button (n)code Solutions Page 4

5 (5) For updating application Click on Update app Fill the URL, Username and Password in textboxes Click on the Check Latest button To Exit from the application Click on the Exit button (6) For setting Date/Time Click on Set Datetime button (7) For close the menu Click on Close button (n)code Solutions Page 5

6 Login Steps: (1) Enter Username and Password in textbox (2) Click on Login button to login After clicking on Login button, Device will check whether GPS co-ordinates are available or not. After successful Login, device will show next screen. If device is out of range from specified mine area, it will give message Distance Verification Failed. Invalid Latitude/Longitude (n)code Solutions Page 6

7 Steps: Create Royalty Pass (1) Click on-> Create Royalty Pass button (2) Fill all the fields in the application Distance must be between 1 to 9999(km) Initial Weight must be between to (Metric Tons) and 1 to 99999(Kilograms) End date must be at least 1 hour greater than Start date. (3) Click on Issue button to issue the pass (4) If pass is issued successfully, it will show pop-up menu of Royalty Pass Code (5) Click on OK button to print the royalty pass (n)code Solutions Page 7

8 (1) To ON/OFF power, press Power key Keypad Functions (2) To change keypad mode from alphabetic to numeric or vice versa, press aa1 key (3) To go to next element, press TAB key and To go to previous element, press F3 key (4) To scroll display upper side, press F1 key and To scroll display lower side, press F2 key (5) To unlock the keypad, first press ESC then key (n)code Solutions Page 8

9 (6) To delete the text, press [X] key (n)code Solutions Page 9

10 Update Application To update the application (if available) (1) Fill the URL, Username and Password in textbox (2) Click on the Check Latest button To Exit from the application (1) Click on the Exit button (n)code Solutions Page 10

11 Troubleshooting (1) If message "Unable to Connect Server" is displayed at login time, please check whether GPRS is ON or not. If it is OFF then turn it ON from setting menu as mentioned in setting part. (2) If GPS is not available, please go to the open area and try again. (3) If error message GPRS module communication Failed! is displayed, then please check whether SIM card is properly inserted in slot or not as shown in image. (4) If battery charging is below 15% during printing of pass, it will give error message "Low Battery" and pass won t print. To resolve this issue, connect battery charger and try again. (5) If error message Paper not available.. Please Load..! is displayed during printing of pass, please load paper roll in device and press F1 key. (n)code Solutions Page 11