Day/Night 480/540 PIR Alarm Sensor Covert IR CCTV Camera with 10 Metres Night Vision

Transcription

1 Data Sheet Day/Night 480/540 PIR Alarm Sensor Covert IR CCTV Camera with 10 Metres Night Vision (Model: XVCPIR) Looks like a PIR Alarm Sensor, but is actually a high resolution camera, ideal for hidden covert surveillance or where a camera would simply look out of place or ugly! This camera also has one extra very special feature, hidden IR LEDs for 10m IR night vision in complet darkness! The XVCPIR Covert PIR Camera is designed for any premises requiring a great value high resolution camera offering good performance. The camera is designed for Indoor use only. Main Features: Good quality 3.7mm Wide Angle lens for viewing angle. Automatically switches from Colour to B/W in low light conditions for optimum Day/Night performance. Energy efficient Infra Red LEDs for up to 10 metres night vision in complete darkness. Camera - Front Camera - Side Camera - Rear Camera - Connections Packaging

2 Features Introduction: zideal for medium to high risk applications, the camera is built around a Sony 1/3 Super HAD High Resolution CCD image sensor which provides good recognition quality and standard identification quality images.the camera has a built in microphone for audio surveillance of the area being watched. zthe camera features built in IR (Infra Red) LEDs, these allow the camera to see in low light or complete darkness up to 10 metres. The camera shows Colour images in good lighting conditions and then switches to B/W images in low light or complete darkness, when in this mode the camera can see the light produced by the IR LEDs and provide good quality images as if it was daylight, however to the human eye the light emitted from the IR LEDs remains invisible! DSP Features: zthe camera features an Xvision E1DN DSP (Digital Signal Processing) chip which offers the following functions to increase the image sensors performance: --Automatic Electronic Iris - This feature automatically adjusts the brightness of the camera image to match the amount of available light. --Automatic White Balance - This feature automatically adjusts the colour temperature of the camera image to match the type of light available, so that white and other colours appear as natural as possible. Resolution: zthe camera is able to produce 540 TVL images. These are equivalent to Near DVD quality and suitable for recording at 704x576 (4CIF) or 720x576 (D1) resolutions. --Automatic Gain Control - This feature automatically increases the video output level of the camera in low light conditions. This has the effect of making the picture brighter. STANDARD RESOLUTION CMOS STANDARD HIGH SUPER HIGH An example of the image resolution and type supported by the camera is highlighted above Light Sensitivity: zthe camera will provide bright images in complete darkness up to a distance of 10 Metres from the camera, beyond this distance the camera will provide bright images in any environment that has a light level above 0.1 lux. Examples of environments that have a light level above 0.1 lux are: --Dawn and Dusk --A Residential Road with Street Lighting --A Bar or Nightclub Lens: zthe camera is fitted with a 3.7mm lens. This lens provides a fixed horizontal viewing angle of. --Day/Night - This feature works in conjunction with a special filter on the image sensor, the filter on the image sensor allows the camera to see light emitted from IR LEDs as white light, allowing the camera to see in low light and complete darkness without actually visibly (to human eyes) lighting up the area. The Day/ Night function then converts this image to B/W so it can be seen clearly and also balances out the picture so that the picture is not too bright. --Low Smear - This feature helps to balance out the camera image when some areas of it may be looking at very bright or reflective objects Coverage area when mounted in a corner Coverage area when looking across the front of a wall Coverage area when looking straight ahead

3 Features --Edge Enhancement - This feature sharpens the edges of objects and people in the camera image making the picture sharper and the resolution higher. Mounting: zthe camera is designed for Wall Mounting. zthe camera is designed for Indoor use only

4 Specifications Model: XVCPIR Image Type Style Weather Resistant Vandal Resistant Mounting Type Dimensions (without bracket): Shipping Weight Warranty Image Sensor/DSP Sensor Type DSP Type DSP Functions Performance Resolution Minimum Illumination Night Vision Lens Type Size Day/Night PIR Sensor Covert Camera No No Wall Width: 60mm, Height: 103mm, Depth: 60mm 0.21 Kg 2 Years (1 Year for LEDs) Xvision IXC1DN DSP Sony 1/3 Super HAD CCD Automatic Electronic Iris Automatic White Balance Automatic Gain Control Day/Night Low Smear Edge Enhancement 540 TVL 0 Lux (IR on) 0.1 Lux (IR off) Yes 10 metres Pinhole 3.7mm Viewing Angle: Power Requirements Operating Voltage: 12V DC 240mA Suggested Power Supply: Connections Video Output: Audio Output: 12V DC 300mA BNC Socket Phono Socket Power Input: DC Socket

5 ORDER CODES XVCPIR XVCPIR-P20 XVCPIR-P40 Camera Only Camera, 20m Cable & Power Supply Camera, 40m Cable & Power Supply