Rigel 3000K - Optics 13 LED Spot - White Model No: RIG US

Transcription

1 Rigel 3000K Optics 13 LED Spot White Model No: RIG US Date: Fixture Type: Project: Specifier/Rep: Certified by C ompliance LM7908 and LM8008 Available for International specifications by adding 'INT' at the end of the existing Model # International spec sheets are available upon request Exact Measurements: Metric Model: Installation: Light Color: Color Temperature: CRI: Fixture Finish: Fixture Material: Diffuser: Diffuser Finish: Diffuser Material: RIG US Recessed for Ceilings and Walls, Suitable for Furniture Remodel (NonIC) Warm White 3000K 93 (96 by request) White 2010 aluminum alloy Specular Hybrid Transparent Specular Hybrid Additional Details LED nonic rated remodel housing is for use in noninsulated areas or where insulation is at least 3 inches from fixture. Spotlight Power Supplies and Control gear are not included (see components),for wiring diagram, see Spec Sheet index. LEDs are also available in Red, Blue and Green colors on request. Optic: 13 Lamp Type: Number of LEDs: Total Wattage: Lamp Life: Constant Current: IP Rating: Power LED 1 1W2W 50,000 hrs at 70% of lamp lumen output with IES LM80. For optimized perfomance follow instruction sheet. 350mA 500mA IP40 Diameter: 30mm / 1 3/16" Height: 26.2mm / 1" Weight: 28g / 0.99oz 30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: / FAX: tech@zaneen.com Page 1 of 2

2 Rigel 3000K Optics 13 LED Spot White Model No: RIG US Date: Fixture Type: Project: Specifier/Rep: Breaking Strength: Screws: Gasket: Power Supply: Control Gear: IK03 Stainless Steel AISI 316L VHB Constant current supply 350mA 500mA with series connection (Not Included) Sold separately (see components) Lumen Chart Photometric File Power Color Temperature Nominal Lumen Actual Lumen RIG W 1W 3000 K RIG W 2W 3000 K System Components Power Supply 6W 350mA constant current [ALI ] Main Voltage Constant Current v, 50/60Hz Power Supply 10W 350mA constant current [ALI ] Main Voltage Constant Current v, 50/60Hz Power Supply 18W 350mA constant current [ALI ] Main Voltage Constant Current v, 50/60Hz Power Supply 20W 500mA constant current [DR020500] Main Voltage V, 50/60Hz Controller Unit 1W 350mA Current controller 15 LED [ECO ] 12mm / 1/2"Ø x 1W 350mA, 24Vdc Controller Unit 2W 500mA Current converter [ECO ] for 15 LED Power Supply Unit 350mA RGB Current controller 1 Led RGB [ECO ] 18mm / 11/16" x 64 mm/ 2 1/2" 350mA RGB, 24Vdc Power Supply 20W 500mA constant current [DR020500] Main Voltage V, 50/60Hz Alternative Finish Models Rigel 3000K Optics 13 LED Spot Aluminum [RIG US] 1 Power Led, 1W 350mA / 2W 500mA 3000K Anodized Aluminum Rigel 3000K Optics 13 LED Spot White [RIG US] 1 Power Led, 1W 350mA / 2W 500mA 3000K White Available Sizes and / or Lamping Rigel 3000K Optics 35 LED Spot White [RIG US] 1 Power Led, 1W 350mA / 2W 500mA 3000K White Rigel 4000K Optics 35 LED Spot White [RIG US] 1 Power Led, 1W 350mA / 2W 500mA 4000K White Rigel 4000K Optics 13 LED Spot White [RIG US] 1 Power Led, 1W 350mA / 2W 500mA 4000K White 30 Tycos Dr. Toronto, ON Canada M6B 1V9 PH: / FAX: tech@zaneen.com Page 2 of 2

3 R Wiring Diagram Reference Wiring diagrams and electrical connections The new lighting systems, that use light sources in a LED solid state must be connected to the main voltage through electronic devices that maintain the critical parameters of operation constant. With Leds in particular, the current values that pass through the light source must remain constant and if necessary measurements are not taken to keep these parameters constant, the LED will tend to absorb higher currents resulting overheating triggering a vicious mortal cycle of the semiconductor. Because of this physicalelectric phenomenon the systems with LED technology need very sophisticated control devices compared to the traditional sources. The current control can be integrated into the power supply or can be placed between the power supply and the LED system. In this case the Led connection should be done in series with a maximum quantity of 10/12 Led that can be connected In the most evolved systems the control electronic can be split and integrated directly on the PCB together with the Leds; here the connection can be done in parallel with a 24V dc power supply and without any limit of the quantity of Leds that can be connected To facilitate the user in consulting this catalog, in this section there is a list of all the diagrams of connection between control gears, interfaces and power supplies, as well as the combination of the correct power supplies / control gear and lighting systems showing the article codes. Important note: Suggested maximum distance from driver: 30ft (using 18 AWG solid copper wire) Disclaimer: Distances, type of wiring and gauge must be determined by a certified professional to avoid voltage drop problem. Maximum 9m (30 ft) Serial connection Maximum 9m (30 ft) Parallel connection

4 Wiring Diagram Reference R A Series connection for 12W LED Power supply codes 350mA ALI ALI ALI IN Power supply OUT LED LED LED LED 500mA DR DR026500

5 R Wiring Diagram Reference H Series connection with current control for 12W LED Current control codes 350mA 500mA Power supply codes 24Vdc 110Vdc ECO * ECO * ALI ALI ALI ALI Multisystem interface ECO or DALI converter ECO * Dimming signal IN OUT IN OUT Power supply Current controller LED LED LED * DMX interface Cod. ECO or ECO or to the DALI converter Cod. ECO )