Worldwide Filter Product Guide

Transcription

1 Worldwide Filter Product Guide Filtro Guía de Productos Guide des produits de filtre Filter-Spezifikationen Guide Filtro Guida ai Prodotti Filtro Guia de Produtos Your Donaldson Distribution Outlet: This catalog contains cross reference to filtration and exhaust products from Donaldson locations around the world...europe, Asia, Australia, South Africa and the Americas.

2

3 Table of Contents Índice Table de Matières Inhaltsverzeichnis Indice Donaldson Filters and Innovation... 2 Filtro Filtre Filteranwendungsliste Filtre Filter Performance Alternatives... 8 Filtros con prestaciones alternativas Alternatives des performances des filtres Alternative filtrationsleistungen Varie tipologie de filtrazione Shoptalk tienda de hablar (shoptalk) Conseils d entretien (maintenance tips) negozio di parlare (shop talk) Pflege-Tipps (maintenance tips) Filter Maintenance Kits Filtro de kits de mantenimiento Filter Kits de maintenance Filter Wartungs-Kits Filtro kit di manutenzione Product Descriptions Descripción de producto Les descriptions de produits Produktbeschreibungen Descrizione del Prodotto Liquid Filtration Heads & Filters Jefes de filtración de líquidos y filtros Filtration des liquides et des filtres chefs Liquid Filtration Köpfe und Filter Capi di filtraggio di liquidi e filtri The data published has been gathered from multiple Donaldson locations. Not all items will be available in your area, so for availability check with your local Donaldson distribution outlet. Thank you for choosing Donaldson Filters. On-Line Catalog Catálogo electrónico Catalogue en ligne On-line Katalog Catalogo online Product Guide by Part Number Especificaciones des los productos por númerou de pieza Caractéristiques techniques par numéro de pièce Productangaben nach Teilenummern Specificazioni prodotto per disegno Products by Type & Dimension Especificaciones des los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Productangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Legal Notice Donaldson assumes no responsibility for errors or omissions in this publication, in data distributed through our internet-based catalogs or other electronic media. The information (including text, images and links) presented could include technical or other inaccuracies and is provided AS IS by Donaldson solely as a convenience. This information is without any warranties, express or implied, including but not limited to warranties of merchantability, fitness for a particular purpose or non-infringement. Please note that changes are periodically made to our data and Donaldson may change the products or services described at any time. You may want to contact your local Donaldson authorized representative for further information before relying on any information.

4 Donaldson Filters Filtro Filtre Filteranwendungsliste Filtre Original PowerCore Air Filters Replacement PowerCore Filters for OE applications are available now through your Donaldson distribution outlet. These products feature our original PowerCore technology. PowerCore filters can be easily recognized by their unique corrugated media and will have the original PowerCore identity. Donaldson PSD Donaldson also has a line of PSD Air Cleaners with the Original PowerCore technology. Freightliner Navistar GM Ford Air Lube Coolant Extended Service Filters When you need maximum protection, Donaldson offers a full line of extended service filters that deliver better engine protection, minimizing vehicle downtime and reducing longterm operating costs. Our extended service filters are a direct replacements to existing OE filters and require no system modifications or special maintenance. Donaldson Endurance coolant filters if you re interested in extending the life of your filter or Donaldson Endurance PLUS if you re looking to extended the life of your standard coolant. Air Filters with Ultra-Web Nanofiber Filtration Technology Extended Service Lube Filters with Synteq Filtration Technology Extended Service Coolant Filters that extend the life of your standard coolant 2

5 Donaldson Filters Filtro Filtre Filteranwendungsliste Filtre Air Filters Donaldson air filters are engineered to meet your exacting requirements and constructed of durable, heavy-duty materials. Donaldson brand performance air filters give you consistent performance over the life of your engine. Donaldson designs and supplies most original equipment air systems, so our replacement filters are designed to meet or exceed original equipment standards. Donaldson air filters are a competitively priced solution for your scheduled maintenance program that allows you to advance to your engine s next scheduled service with full engine performance and protection. Heavy-duty liners Corrosion resistant, coated steel liners support the filter media during operation and maximizes airflow. Beading Applied to both inner and outer liners, beading is designed to stabilize the media and prevent pleat tip wear. Radial seal filter seals Radial seal filters slip easily on and off the outlet tube during installation and service. Axial filter seals Strong, pliable gasket ensures a leak-free seal when properly installed. The gasket won t harden or deteriorate over the useful life of the filter. Pleatloc media spacing Ensures uniform pleat spacing, keeps filter media from bunching during operation and promotes longer filter service life. 3

6 Donaldson Filters Filtro Filtre Filteranwendungsliste Filtre Complete Filtration Coverage Donaldson s line of liquid filters are designed to meet the needs of the engine application. With greater efficiency, more capacity and long service life you get maximum engine protection. You can be certain that Donaldson filters will perform in the most demanding environments. Lube Filters Donaldson durable lube filters keep your equipment running at its best to let you focus on what s most important, getting your job done. Fuel Filters Our fuel filters provide clean, filtered fuel that prevents pump wear, injector clogging, premature engine wear and can boost fuel efficiency. Donaldson has a complete line of spin-on, and cartridge-style filters. They are compatible with petroleum-based, ULSD and OEM approved Biodiesel fuels. Liquid Filter Kits for Popular Engines Kits are available for popular engine filters in multiple combinations - lube + fuel, lube + fuel + coolant and other combinations. Available kits detailed in the Liquid Maintenance Kits section. Heads & Filters - Mix n Match For those of you spec ing new systems or wanting to change out an existing lube, fuel, coolant or hydraulic system, these new pages show head assemblies and their matching filters. To help make your selection easier, we ve listed the rated flow by filters and provided the filtration performance attribute that allows you to make the proper choice for your system. 4

7 Donaldson Filters Filtro Filtre Filteranwendungsliste Filtre Coolant Filtration SCA and SCA+ Filters A complete line of replacement filters for diesel engines with various amounts of chemical treatment are available. Coolant Treatment Maintenance Our 3-way, coolant test strip is an fast and easy method to use during routine maintenance to adequately diagnose and supplement your coolant chemicals. If you need to supplement your coolant additive package, use SCA and SCA+ chemical treatment available in many sizes from a pint to 55 gallon drum. Hydraulic/Transmission Filters Donaldson filters for mobile hydraulic systems are designed to keep the fluid and system as clean as necessary by removing particulate matter and debris which could ultimately cause component wear or failure. High Pressure Filter Protects expensive hydraulic components from particulate and debris. Suction Filter Protects pump for particulate matter contamination. In-Line Pump Donaldson has an extensive line of hydraulic and transmission filters and system accessories. With our extensive stock program, you can mix and match filters with head assemblies to design a custom filtration system. Return Line Filter Removes contaminants generated during equipment operation. T.R.A.P. Tank Breathers Thermally reactive barrier that strips moisture vapor from incoming air. Switch Tank Strainer Filters large pieces of debris before entering hydraulic system. Commonly recognized by our orange can, the Duramax revolutionized the hydraulic industry when introduced in the 1970s. 5

8 A History of Innovation 1910s First-ever air cleaner invented by Frank Donaldson 1970s Pulse Jet Air Cleaner (PJAC ) applied on M1 Abrams tank Mobile hydraulic low pressure filters manufactured 1930s First closed crankcase ventilation system (pollution control device) invented for cars Patent issued for oil-washed air cleaner 1950s Innovative dry-type air cleaner and filter First Donaldson exhaust manufacturing facility opened SealClamp band-style exhaust clamp 1980s Donaldson pioneered Ultra-Web Nanofiber Filtration Technology Revolutionary Duramax mid-pressure hydraulic spin-on Synteq filter media developed for lube and hydraulic Duramax Produced engine liquid filters 1960s Introduced mufflers with integrated ejectors Pleatloc media spacing invented Innovative RadialSeal sealing technology Mufflers designed to meet U.S. EPA truck noise regulations Active DPF system for transit bus verified Fuel filter production began in South Africa 6

9 A History of Innovation 1990s Ultra-Web Nanofiber Filtration Technology first used in engine filtration products Donaldson PowerCore Filtration Technology developed Engine liquid filter and mobile hydraulics production expanded globally Donaldson Endurance extended service filters introduced Donaldson pioneers the design of the integrated catalytic converter muffler Silent Partner first muffler to effectively reduce engine brake noise 2000 and beyond Ground-breaking PowerCore G2 Filtration Technology introduced Plastic Spiracle crankcase filtration system introduced to eliminate emissions from open crankcase vents Synteq XP filter media launched in next generation Duramax and Spiracle crankcase filtration system Synteq fuel filter media first and second generations Emissions compliant lube and fuel technologies T.R.A.P. filtration technology for hydraulic reservoirs First to verify patented tailpipe and crankcase solutions with CARB and EPA DPF cleaning system and DMF muffler launched for the emissions retrofit market Filtration Innovations... over 1500 active patents worldwide 7

10 Filter Performance Alternatives Filtros con prestaciones alternativas Alternatives des performances des fi ltres Alternative fi ltrationsleistungen Varie tipologie de fi ltrazione Filter Performance Alternatives Use this section to see what alternatives are available for a standard filter listed in this catalog. Look up the number in the first column and additional filters with different filter media will be listed in the second and third columns. Donaldson engineers work closely with original equipment manufacturers to design filtration systems for a particular vehicle/engine and its operating environment. Perhaps you are interested in protecting your engine and reducing your operating costs with extended life filters. A Donaldson Endurance designated filter is what we recommend if you re looking to extend filter service change intervals or looking for higher efficiency compared to a cellulose media filter. A filter with CELLULOSE media meets typical original equipment performance requirements. In most cases, this filter performs the same as the one originally supplied with your engine or vehicle. SYNTEQ filter media can be found in Donaldson lube, fuel and hydraulic filters. In all cases, the filter provides a higher level of filtration efficiency than filters with cellulose media. There are air filters that are CELLULOSE- LONG-LIFE. Cellulose, long-life filters are ideal when you want to service your air filter by restriction measurement. An air filter with TREATED media is designed for on-highway vehicles operating in high carbon environments. An air filter with HIGH PULSATION media is generally used in one and two cylinder engine applications (gen sets) nonreciprocating air compressors where the air cleaner experiences excessive intake air pulsation. An air filter with FLAME RETARDANT media contains UL approved media. UL approval indicates suitability for operating in flammable applications. Flame retardant filters have the Duraguard marking on the end cap of the filter. Filter Alternative Filter 1 Alternative Filter 2 Part No. Media Type Part No. Media Type Part No. Media Type EAF5000 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5001 Donaldson Endurance Ultra-Web P Standard EAF5002 Donaldson Endurance Ultra-Web P Standard EAF5007 Donaldson Endurance Ultra-Web P Standard EAF5008 Donaldson Endurance Ultra-Web P Standard EAF5014 Donaldson Endurance Ultra-Web P Standard EAF5015 Donaldson Endurance Ultra-Web P Standard EAF5016 Donaldson Endurance Ultra-Web P Standard EAF5024 Donaldson Endurance Ultra-Web P Treated Media EAF5025 Donaldson Endurance Ultra-Web P Treated Media EAF5026 Donaldson Endurance Ultra-Web P Standard EAF5027 Donaldson Endurance Ultra-Web P Standard EAF5028 Donaldson Endurance Ultra-Web P Standard EAF5029 Donaldson Endurance Ultra-Web P Standard EAF5034 Donaldson Endurance Ultra-Web P Standard EAF5035 Donaldson Endurance Ultra-Web P Standard EAF5038 Donaldson Endurance Ultra-Web P Standard EAF5039 Donaldson Endurance Ultra-Web P Standard EAF5040 Donaldson Endurance Ultra-Web P Standard EAF5041 Donaldson Endurance Ultra-Web P Standard EAF5042 Donaldson Endurance Ultra-Web P Standard EAF5043 Donaldson Endurance Ultra-Web P Standard EAF5044 Donaldson Endurance Ultra-Web P Standard EAF5046 Donaldson Endurance Ultra-Web P Standard EAF5047 Donaldson Endurance Ultra-Web P Standard EAF5048 Donaldson Endurance Ultra-Web P Standard EAF5049 Donaldson Endurance Ultra-Web P Standard EAF5053 Donaldson Endurance Ultra-Web P Standard EAF5055 Donaldson Endurance Ultra-Web P Standard EAF5056 Donaldson Endurance Ultra-Web P Standard EAF5057 Donaldson Endurance Ultra-Web P Standard EAF5061 Donaldson Endurance Ultra-Web P Standard EAF5065 Donaldson Endurance Ultra-Web P Standard 8

11 Filter Performance Alternatives Filtros con prestaciones alternativas Alternatives des performances des fi ltres Alternative fi ltrationsleistungen Varie tipologie de fi ltrazione Filter Alternative Filter 1 Alternative Filter 2 Part No. Media Type Part No. Media Type Part No. Media Type EAF5066 Donaldson Endurance Ultra-Web P Standard EAF5067 Donaldson Endurance Ultra-Web P Standard EAF5069 Donaldson Endurance Ultra-Web P Standard EAF5074 Donaldson Endurance Ultra-Web P Standard EAF5095 Donaldson Endurance Ultra-Web P Standard EAF5096 Donaldson Endurance Ultra-Web P Standard EAF5097 Donaldson Endurance Ultra-Web P Standard EAF5098 Donaldson Endurance Ultra-Web P Standard EAF5099 Donaldson Endurance Ultra-Web P Standard EAF5100 Donaldson Endurance Ultra-Web P Standard EAF5101 Donaldson Endurance Ultra-Web P Standard EAF5102 Donaldson Endurance Ultra-Web P Standard EAF5104 Donaldson Endurance Ultra-Web P Standard EAF5105 Donaldson Endurance Ultra-Web P Standard EAF5106 Donaldson Endurance Ultra-Web P Standard EAF5107 Donaldson Endurance Ultra-Web P Standard EAF5108 Donaldson Endurance Ultra-Web P Standard EAF5109 Donaldson Endurance Ultra-Web P Standard EAF5147 Donaldson Endurance Ultra-Web P Standard EAF5148 Donaldson Endurance Ultra-Web P Standard EAF5149 Donaldson Endurance Ultra-Web P Standard EAF5150 Donaldson Endurance Ultra-Web P Standard EAF5151 Donaldson Endurance Ultra-Web P Standard EAF5152 Donaldson Endurance Ultra-Web P Standard EAF5153 Donaldson Endurance Ultra-Web P Standard EAF5187 Donaldson Endurance Ultra-Web P Standard EAF5188 Donaldson Endurance Ultra-Web P Standard EAF5189 Donaldson Endurance Ultra-Web P Standard EAF5194 Donaldson Endurance Ultra-Web P Standard ECF4085 Donaldson Endurance Synteq P Standard ECF4088 Donaldson Endurance Plus P Standard EFF0047 Donaldson Endurance Synteq P Standard EFF9092 Donaldson Endurance Synteq P Standard ELF3998 Donaldson Endurance Synteq P Standard ELF7300 Donaldson Endurance Synteq P Standard ELF7345 Donaldson Endurance Synteq P Standard ELF7349 Donaldson Endurance Synteq P Standard ELF7405 Donaldson Endurance Synteq P Standard (118 MM Dia) P Standard (135 MM Dia) ELF7483 Donaldson Endurance Synteq P Standard ELF7670 Donaldson Endurance Synteq P Standard ELF7739 Donaldson Endurance Synteq P Standard ELF7900 Donaldson Endurance Synteq P Standard ELF7947 Donaldson Endurance Synteq P Standard P Standard P High Pulsation P Flame Retardant P Standard P Flame Retardant P Standard EAF5000 Donaldson Endurance Ultra-Web P Standard EAF5128 Donaldson Endurance Ultra-Web P Treated Media P Standard EAF5024 Donaldson Endurance Ultra-Web P Treated Media EAF5025 Donaldson Endurance Ultra-Web P Standard P Treated Media P Standard EAF5026 Donaldson Endurance Ultra-Web P Standard EAF5097 Donaldson Endurance Ultra-Web P Standard EAF5027 Donaldson Endurance Ultra-Web P Treated Media P Standard EAF5029 Donaldson Endurance Ultra-Web P Treated Media P Standard EAF5073 Donaldson Endurance Ultra-Web P High Pulsation P Standard P Long Life P High Pulsation P Standard P Long Life P Flame Retardant P Standard P Long Life P High Pulsation P Standard P Long Life P High Pulsation P Standard P Standard EAF5073 Donaldson Endurance Ultra-Web P Treated Media P Standard EAF5029 Donaldson Endurance Ultra-Web P Treated Media 9 Filter Performance Alternatives Products by Type & Dimension Filter Maintenance Kits Liquid Filtration Heads & Filters

12 Liquid Filtration Heads & Filters Filter Maintenance Kits Product Guide by Part Number Filter Performance Alternatives 10 Filter Performance Alternatives Filtros con prestaciones alternativas Alternatives des performances des fi ltres Alternative fi ltrationsleistungen Varie tipologie de fi ltrazione Filter Alternative Filter 1 Alternative Filter 2 Part No. Media Type Part No. Media Type Part No. Media Type P Standard EAF5047 Donaldson Endurance Ultra-Web P Standard EAF5028 Donaldson Endurance Ultra-Web P Standard EAF5024 Donaldson Endurance Ultra-Web P Treated Media P Standard EAF5053 Donaldson Endurance Ultra-Web P Treated Media P Treated Media EAF5111 Donaldson Endurance Ultra-Web P Standard P Standard EAF5111 Donaldson Endurance Ultra-Web P Treated Media P Treated Media EAF5053 Donaldson Endurance Ultra-Web P Standard P Standard EAF5055 Donaldson Endurance Ultra-Web P Synteq P Standard P Synteq P Standard P Synteq P Standard P Synteq P Standard P Synteq P Standard P Synteq P Standard P Synteq P Standard P Synteq P Standard P Standard EAF5000 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5001 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5002 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5007 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5008 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5014 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5015 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5016 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5194 Donaldson Endurance Ultra-Web P Standard EAF5019 Donaldson Endurance Ultra-Web P Standard EAF5028 Donaldson Endurance Ultra-Web P Long Life P Standard P Long Life P Standard P Long Life P Standard P Long Life P Standard EAF5034 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5035 Donaldson Endurance Ultra-Web P Long Life P Standard P Long Life P Standard P Long Life P Standard EAF5038 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5039 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5040 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5041 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5042 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5043 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5044 Donaldson Endurance Ultra-Web P Long Life P Standard P Long Life P Standard EAF5046 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5049 Donaldson Endurance Ultra-Web P Long Life P Standard P Long Life P Flame Retardant P Standard EAF5134 Donaldson Endurance Ultra-Web P Flame Retardant P Standard P Long Life P High Pulsation P Standard EAF5056 Donaldson Endurance Ultra-Web P Standard EAF5057 Donaldson Endurance Ultra-Web P Standard P High Pulsation P Standard P High Pulsation P Standard P Long Life P Standard P Long Life P Standard P Long Life P Standard P Long-Life EAF5126 Donaldson Endurance Ultra-Web P Standard P Long Life P Standard P Long Life P Standard P Long-Life EAF5127 Donaldson Endurance Ultra-Web P Standard EAF5095 Donaldson Endurance Ultra-Web P Standard EAF5096 Donaldson Endurance Ultra-Web P Standard EAF5099 Donaldson Endurance Ultra-Web P Long Life P Standard EAF5102 Donaldson Endurance Ultra-Web

13 Filter Performance Alternatives Filtros con prestaciones alternativas Alternatives des performances des fi ltres Alternative fi ltrationsleistungen Varie tipologie de fi ltrazione Filter Alternative Filter 1 Alternative Filter 2 Part No. Media Type Part No. Media Type Part No. Media Type P Standard EAF5187 Donaldson Endurance Ultra-Web P Standard EAF5188 Donaldson Endurance Ultra-Web P Standard EAF5189 Donaldson Endurance Ultra-Web P Long Life EAF5000 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5001 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5002 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5007 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5008 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5014 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5015 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5016 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5028 Donaldson Endurance Ultra-Web P Standard P Long Life P Standard P Long Life P Standard P Long Life EAF5034 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5035 Donaldson Endurance Ultra-Web P Standard P Long Life P Standard P Long Life P Standard P Long Life EAF5038 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5039 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5040 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5041 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5042 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5043 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5044 Donaldson Endurance Ultra-Web P Standard P Long Life P Standard P Long Life EAF5046 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5049 Donaldson Endurance Ultra-Web P Standard P Long Life P Standard P Flame Retardant P Long Life P Standard P Flame Retardant P Long Life P Standard P High Pulsation P Long Life P Standard P High Pulsation P Long Life P Standard P Long Life P Standard P Long Life P Standard P Long Life P Standard P Long Life P Standard P Long Life P Standard P High Pulsation P Standard EAF5132 Donaldson Endurance Ultra-Web P Long-Life P Standard EAF5127 Donaldson Endurance Ultra-Web P Long Life EAF5095 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5096 Donaldson Endurance Ultra-Web P Standard P Long Life EAF5099 Donaldson Endurance Ultra-Web P Standard P Standard EAF5061 Donaldson Endurance Ultra-Web P Standard EAF5065 Donaldson Endurance Ultra-Web P Standard EAF5066 Donaldson Endurance Ultra-Web P Standard EAF5067 Donaldson Endurance Ultra-Web P Standard EAF5069 Donaldson Endurance Ultra-Web P Standard EAF5105 Donaldson Endurance Ultra-Web P Standard EAF5104 Donaldson Endurance Ultra-Web P Standard EAF5135 Donaldson Endurance Ultra-Web P Standard EAF5106 Donaldson Endurance Ultra-Web P Standard EAF5100 Donaldson Endurance Ultra-Web P Standard EAF5101 Donaldson Endurance Ultra-Web P UL P Standard P Long Life P Standard P Standard P Long Life P Standard EAF5147 Donaldson Endurance Ultra-Web P Standard EAF5098 Donaldson Endurance Ultra-Web P Standard EAF5151 Donaldson Endurance Ultra-Web P Standard EAF5150 Donaldson Endurance Ultra-Web P Standard EAF5148 Donaldson Endurance Ultra-Web 11 Filter Performance Alternatives Products by Type & Dimension Filter Maintenance Kits Liquid Filtration Heads & Filters

14 Filter Performance Alternatives Filtros con prestaciones alternativas Alternatives des performances des fi ltres Alternative fi ltrationsleistungen Varie tipologie de fi ltrazione Liquid Filtration Heads & Filters Filter Maintenance Kits Product Guide by Part Number Filter Performance Alternatives Filter Alternative Filter 1 Alternative Filter 2 Part No. Media Type Part No. Media Type Part No. Media Type P Standard EAF5149 Donaldson Endurance Ultra-Web P Standard P Synteq P Standard P Synteq P Paper Media P Felt Media P Felt Media P Paper Media P Standard P FFWS Twist & Drain P Short P Drain Screw P FFWS Twist & Drain P Standard P H2O Absorbing P Cellulose Media P Cotton Media P Standard Lube P Synteq Lube P Standard Hydraulic P Standard P Synteq P Collection Bowl P Drain Valve P Standard P Synteq P Felt Media P Paper Media P Paper Media P Felt Media P Treated Cellulose Twist & Drain P Synteq Twist & Drain P Standard Twist & Drain P Standard ELF7947 Donaldson Endurance Synteq P Standard EFF0047 Donaldson Endurance Synteq P Synteq P Treated Cellulose P Standard P FFWS Spin-on with H2O Sensor-ISM P Reuse H2O Sensor P FFWS Spin-on with H2O Sensor-ISC P Reuse H2O Sensor P Standard ELF7670 Donaldson Endurance Synteq P Drain Valve P Collection Bowl P Standard ELF7483 Donaldson Endurance Synteq P Reuse H2O Sensor P FFWS Spin-on with H2O Sensor-ISM P FFWS Spin-on with H2O Sensor-ISC P Standard ELF3998 Donaldson Endurance Synteq P Standard ELF7300 Donaldson Endurance Synteq P Standard ELF7483 Donaldson Endurance Synteq P Standard ELF7739 Donaldson Endurance Synteq P Standard ELF7405 Donaldson Endurance Synteq P Standard (118 MM Dia) P Standard ECF4088 Donaldson Endurance Plus P Standard ELF7405 Donaldson Endurance Synteq P Standard (135 MM Dia) P Standard ECF4085 Donaldson Endurance Synteq P FFWS with Bowl P FFWS Twist & Drain P FFWS with Bowl P Standard P Standard P Synteq P Standard EFF9092 Donaldson Endurance Synteq P Standard P Synteq P Standard P Synteq P Standard EFF6917 Donaldson Endurance Synteq P Standard Twist & Drain P Synteq Twist & Drain P Treated Cellulose Twist & Drain P Standard ELF7349 Donaldson Endurance Synteq P Standard ELF7345 Donaldson Endurance Synteq P Standard ELF7900 Donaldson Endurance Synteq P Standard P Synteq P Standard EAF5108 Donaldson Endurance Ultra-Web P Standard P Flame Retardant P Standard EAF5152 Donaldson Endurance Ultra-Web P Standard P Flame Retardant P Standard EAF5153 Donaldson Endurance Ultra-Web P Flame Retardant P Standard P Flame Retardant P Standard P Standard EAF5074 Donaldson Endurance Ultra-Web P Standard EAF5131 Donaldson Endurance Ultra-Web P Standard EAF5130 Donaldson Endurance Ultra-Web P Standard EAF5133 Donaldson Endurance Ultra-Web P Standard EAF5129 Donaldson Endurance Ultra-Web P Standard P Flame Retardant P Standard EAF5125 Donaldson Endurance Ultra-Web P Flame Retardant P Standard P UL P Standard EAF5091 Donaldson Endurance Ultra-Web P Flame Retardant P Standard 12

15 Shoptalk The following Shoptalk section contains maintenance tips, cost reduction ideas and product features and benefits. If you re interested in having Shoptalk arrive to you by or mail, please go to to sign up. Simple facts for diesel engine owners... catch-up on the latest information in one of two ways Direct Mail Cards If you haven t signed up to get your free subscription to Shoptalk, you have three options: 1. Fill out our online subscription form at 2. Call us toll free at or directly at Fill out the Order Form Reply Card included in the sample pack and drop it in the mail. The same information found in our cards is also available 24/7 from the Donaldson Engine+Vehicle web site. Go to donaldson.com! General Topics Will Using Aftermarket Filters or Mufflers Void My Warranty?...14 Do You Store or Warehouse Filters On-Site?...14 Filter Recycling...15 Industry Resource: The Filter Manufacturers Council..15 Liquid Filtration We Set the Standard for Liquid Filtration Performance...15 Diesel Engine Liquid Test Kits...16 Watch Out for Dents on Liquid Filters!...17 They Say a Picture is Worth a Thousand Words...18 Watch Out for Old Compression Gaskets!...18 Using Donaldson Fuel Filters with Biodiesel...19 Don t Retighten a Lube Filter Once it Has Been Installed...19 Air Filtration Worried About Water in Your Air Intake System?...20 Air Intake Accessories for All Conditions Available from Donaldson...20 Caution: Replace Damaged or Missing VacValves Immediately!...21 Want to Change Your Air Filter Less Often?...22 Take a Look at Air Filtration Efficiency and Dust Holding Capacity...23 All Nanofibers are Not Created Equal...23 Don t Throw Away a Good Filter Just Because it Might Look Dirty...24 Keep Those ECG Konepac Air Cleaner Latches Inspected...25 Dust Dumpa Solves Dust Expulsion Issues in High Dust Environments...25 Dust Dumpa...25 What s Donaldson s Position Air Filter Cleaning & Reuse?...26 Hydraulic Filtration How Big is a Micron?...27 Minimize Water in Hydraulic Systems...27 Understanding the Beta Rating System...28 Compatibility of Donaldson Filter Media with Hydraulic Fluids Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters

16 Shoptalk WARRANTY & FILTER STORAGE/HANDLING Liquid Filtration Heads & Filters Filter Maintenance Kits Shoptalk Filter Performance Alternatives Will Using Aftermarket Filters or Mufflers Void My Warranty? Answer: Good News! No need to worry about voiding your warranty you can use aftermarket products! You still need to follow your manufacturer s recommend maintenance practices, but your warranty is protected under the Magnuson- Moss Warranty Act. Information on the Magnuson-Moss Warranty Act is available at bus01.shtm. In addition, Donaldson warrants its aftermarket products against failure due to defects in materials and workmanship for the period specified under Terms and Conditions for the particular product. Ref: Shoptalk Card F Do You Store or Warehouse Filters On-Site? Whether it s an empty trailer or building, it s important to practice good storage and handling techniques when it comes to filters. Before installing any filter on a piece of equipment make sure the filter is clean, unused and free of damage. Filter Storage & Handling Tips Never store an air filter on a shelf without it being in a box or totally sealed from outside contaminant. When you see an open box of filters on the shelf, tape it shut - unless the filters inside the box are individually sealed. Handle filters with care to prevent filter damage; for example, don't throw filters into the back of a truck. If transporting filters from one job site to another, don t let them roll around on the floorboard or back of the truck that may cause damage. Metal storage shelves may cause condensation to form on filters if sitting directly on metal. Over time the filter may get rusty. Another good reason to store filters in boxes. If product box has layers of contaminant, take care that the contaminant doesn t get on the new filter as you remove it from the box. Practice "first-in, first-out" with your inventory. When possible, always use the oldest inventory first. Make sure any labels with product information and manufacturing dates are visible to personnel pulling from the shelves. 14

17 Filter Recycling Donaldson encourages all individuals and businesses to recycle their used oil filters. Recycling used oil filters helps divert waste from landfills while providing a valuable resource for recycling. We encourage you to check your local disposal regulations for proper disposal and recycling. Industry Resource: The Filter Manufacturers Council Established in 1971, the Filter Manufacturers Council represents North American manufacturers of vehicular and industrial filtration products. Initially developed to monitor regulatory and technological developments that affect the industry, the Council has since expanded its activities substantially. The Council has undertaken several environmental initiatives including partnering with states to promote the proper management of used oil filters. In addition, the operation of the hotline and web site provide valuable information regarding state regulations and companies that transport, process and recycle used oil filters. Donaldson Company is a member of the Filter Manufacturers Council. Shoptalk LIQUID FILTRATION We Set the Standard for Liquid Filtration Performance When you are looking for improved performance, look for Donaldson lube, fuel and hydraulic filters with synthetic media they are easy to spot; they carry our Synteq brand name! Synteq for Lube Filtration When an application requires higher efficiency filtration than cellulose filter media can deliver, we use Synteq. Synteq captures more and smaller contaminant than cellulose. The microscopic photo of our Synteq lube filter media shows the consistency in fiber size and composition. The black circle in the picture above represents the diameter of a 20 micron particle easily captured by the media. Synteq for Fuel Filtration Our newest filter media technology is specifically designed to remove water and contaminant from the fuel system. Synteq can be used with other technologies like our Twist&Drain valve. The photo above highlights the layers of our Synteq Fuel filter media. The middle layer is the key to delivering maximum filtration capacity and optimum water separation. The middle layers is designed to capture progressively finer contaminant. In comparison to silicone treated cellulose media, Synteq media technology collects a greater amount of emulsified water. Ref: Shoptalk Card F Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters

18 Shoptalk LIQUID FILTRATION Liquid Filtration Heads & Filters Filter Maintenance Kits Shoptalk Filter Performance Alternatives Diesel Engine Liquid Test Kits Lube Oil Test Kits Today s maintenance personnel know that regular monitoring of the oil quality and coolant is key to reducing operating costs. In diesel engine applications, oil analysis is a critical activity to safety extend your oil drain intervals with extended service filters, like our Donaldson Endurance line of products. Oil analysis is critical to proper system and engine performance. Oil analysis service includes: Performing equipment tests Evaluating test results Providing detailed reports Specific maintenance recommendations Interested in Extending Your Oil Drain Intervals? Today s vehicle and engine owners know that regular monitoring of engine oil is key to reducing operating costs. Setting up an oil analysis program is a great way to monitor the cleanliness of your current oil. This will help determine if you can safely extend your drain intervals. Combine our Donaldson Endurance oil analysis, the use of premium oil and Donaldson Endurance premium filtration products and you ll discover how you can safely extend drain intervals and prolong your engine and equipment life. Donaldson Endurance Kit is Ideal when looking to extend oil drain intervals. Use Kit EOA7376 Kits for Fleets and Off-Road Vehicles and Equipment 1- OEM Drain use Kit X Drain Development use Kit EOA Metals, ppm by wt Viscosity, cst. Water % Fuel % by Infrared Fuel % by GC Soot by Infrared Soot by LEM Glycol (Coolant) Coolant Test Kit Diesel engine manufacturers also recommend routine checks of the coolant to make sure your additive packages and coolant chemistry is in balance. The coolant test strip kit tests for freeze protection as well as the concentration of your supplemental coolant additive. Proper Diesel Engine Coolant Maintenance Requirements: 1. Donaldson coolant filters 2. Low silicate antifreeze 3. Good quality water 4. Protective coolant additive 5. Chemical concentration testing Use X for routine oil analysis for diesel engines or hydraulic oil reports on wear metals and additives. Recommended Sampling Intervals On-Road Engines Diesel 10,000 miles / oil change Gasoline 3,000 miles / oil change LPG 3,000 miles / oil change Non-Engines 20,000 miles / 500 hours Off-Road Engines Diesel Gasoline LPG Non-Engines 250 hours / oil change 150 hours / oil change 150 hours / oil change 500 hours / monthly Our coolant chemistry test (X007684) includes complete test instructions, coolant filter and supplemental coolant additive information and twelve sealed test strips. Ref: Shoptalk Cards F115213, F & Brochure F

19 Shoptalk LIQUID FILTRATION Test Kits for Hydraulic Oil Our basic hydraulic oil kit reports TAN (total acid number), water in PPM and ISO particle count. Hydraulic Oil Test Kit 1- Basic Use Kit X Correct Drain and ISO use Kit X Metals, ppm by wt Viscosity, cst. Water % TAN (Total Acid #) Water, ppm ISO Particle Count Kit X for basic hydraulic oil analysis Recommended Sampling Interval Marine Engines Main 250 hours / monthly Support 150 hours / oil change Non-Engines 500 hours / monthly Industrial / Stationary Diesel Engines 500 hours / monthly Nat Gas Engines 500 hours / monthly Gas Turbines 250 hours / monthly Compressors 250 hours / monthly Steam Turbines 250 hours / monthly Geared Drives 500 hours / monthly Bearings 500 hours / monthly Hydraulics 500 hours / monthly Oil Sampling Accessories These accessories can simplify your oil analysis during the normal maintenance routines. plastic tubing (P176433) sampling pump (P176431) quick sampling valve (P563212) Sampling Pump (P176431) & Plastic Tubing (sold separately in 100 ft. rolls) Quick Sampling Metal Valve for test point. 1/8" NPT (P563212) Working Pressure 5800 psi / 400 bar Watch Out for Dents on Liquid Filters! Once the steel filter canister is dented, a concentration of stress in the canister material is created, making the canister more susceptible to fatigue. Dents May Cause Cracks Cracked filters can be caused by dents made during improper installation of liquid filters. Filters that are dented prior to or during installation should not be used. Filters dented after installation should be replaced immediately. The cost of replacing a dented filter is much less than the cost of the damages that could result from a dented filter that fails during service. The fatigue to filters results from the pressure pulses within the system. The pressure is regulated by a pressure regulating valve. This valve is spring operated and intermittently opens and closes to regulate the pressure. Once the pressure exceeds the setting of the spring in the regulating valve, the valve will open and relieve pressure until the spring can expand and close the valve. This function is repeated continuously during the operation of the system, creating a pulsing effect. The canister of the filters is subjected to the same pulsation. However, unlike the spring in the pressure regulating valve, the canister material is susceptible to failure after such fatigue. Filters are designed with a low carbon steel to resist fatigue and are formed so the stress created by the pulses in the system are equalized over the surface area of the canister. A dent provides an area of stress concentration where pressure pulses can greatly shorten the fatigue life of the canister. If you receive filters that were dented prior to your receipt, you should contact customer support at for corrective action. More information is available through the Filter Manufacturers Council at: Ref: Shoptalk Card F Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 17

20 Shoptalk LIQUID FILTRATION Filter Performance Alternatives They Say a Picture is Worth a Thousand Words Here s a listing of the common installation, drain and brand icons along with its definition shown on Donaldson liquid filters. Do Not Use Tools Clean Filter Base Watch Out for Old Compression Gaskets! Shoptalk Fill With Fuel Lubricate Gasket Fill With Oil (hydraulic or lube) Hand Tighten When changing any filter that has a gasket use caution as old gaskets may stick! A compression seal is a means of preventing migration of liquids, gases or solid contaminates across a joint or opening in an assembly or housing. A seal not only prevents the escape of fluid from inside and foreign material from entering the system from outside, but it must provide for easy installation and removal. A new gasket is critical for proper filter function. Filter Maintenance Kits + 1/2 Complete Tightening (will include # of turns) FFWS Open, Drain, Close Remember Remove used gaskets and clean the sealing area thoroughly Always use a new gasket with a replacement filter Over-tightening the filter may damage the head Dispose of used filters properly More information on compression gaskets can be found at the Filter Manufacturers Council at Liquid Filtration Heads & Filters Disposal / Recycle N. America Symbol Dispose / Recycle Europe Symbol More information on installation symbols can be found at the Filter Manufacturers Council at Ref: Shoptalk Card F Ref: Shoptalk Card F

21 Using Donaldson Fuel Filters with Biodiesel Donaldson fuel filtration products are compatible with OEM approved grades ASTM D 6571 Biodiesel and ULSD fuels. Biodiesel is an alternative fuel that is rapidly growing in use. However, biodiesel received a bad reputation after the problems that occurred in 2005 when some states mandated the use of B2 biodiesel blend. One of the problems was a very short fuel filter life. Further research revealed that the problems encountered were due to the use of biodiesel that did not meet ASTM D 6751 specifications. The use of biodiesel that does not meet these specifications may cause problems within a fuel system. Filter Plugging Filter plugging problems can be prevented by effectively cleaning storage tanks before introducing biodiesel. Filter plugging can also be minimized by using low blends of biodiesel and/or ensuring the biodiesel that you are using is from a quality source meeting the ASTM D 6751 specifications. BQ-9000 is a quality certification for biodiesel suppliers who provide quality biodiesel meeting the ASTM D 6751 specification. Using High Blends of Biodiesel Filters that are used in special applications using high blends of biodiesel and those near B100 or unblended B100, should use solvent resistant sealing materials. Continued use of standard sealing materials commonly found on popular fuel filters could result in deterioration or swelling of the material, which may cause leaks. Biodiesel, n. - a fuel comprised of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, designated B100, and meeting the requirements of ASTM D Biodiesel blend, n. - a blend of biodiesel meeting ASTM D 6751 with petroleum-based diesel fuel designated BXX, where XX is the volume percent of biodiesel. More information on ULSD or Biodiesel can be found at Ref: Shoptalk Card F Shoptalk LIQUID FILTRATION Don t Retighten a Lube Filter Once it Has Been Installed To avoid crossthreading DO NOT OVER TIGHTEN OR RETIGHTEN a filter. Follow These Installation Instruction for Spin-On Engine Lube Filters The spin-on engine lube filter is a commonly serviced component on your vehicle. To insure normal oil filter service life and to prevent oil leakage or possible internal engine damage, the following procedure should be followed when replacing spin-on engine lube filters. 1. Open hood, remove the oil fill cap and place cap on air filter cover or any other flat visible surface. (This will serve as a reminder that oil has not been added to the crankcase). 2. Remove the oil drain plug(s), drain the oil and reinstall/replace the drain plug(s). If drain plug(s) has a crush ring or gasket, check for damage. If damaged, replace the ring or gasket. 3. Remove the oil filter using an oil filter wrench, if necessary. 4. Clean mounting base, making sure the old oil filter gasket is not stuck to the base. Apply a light film of clean oil to the new filter gasket. Note: Never use grease to lubricate the gasket. 5. Screw the new filter on carefully, avoiding cross-threading. On turbocharged engines, it may be necessary to fill the filter with clean engine oil prior to installation. Check engine manufacturer s recommendations. After the sealing gasket contacts the mounting base, tighten the filter per the instructions found on the filter or filter box. DO NOT OVER TIGHTEN. 6. Fill the crankcase to the recommended level with oil as per the manufacturer s specifications and install the oil fill cap. Start the engine and insure that the engine oil pressure light goes out or the oil pressure comes up to normal on the oil pressure gauge. 7. Turn off the engine and check the dipstick reading per vehicle manufacturer s instructions. Add additional oil to engine, if needed. 8. Start the engine and check for oil leakage around the oil filter and drain plug. 9. Turn off the engine and close the hood. 10. Check local, state and federal regulations for the proper disposal of your used oil and filters. More information is available through the Filters Manufacturers Council at: Ref: Shoptalk Card F Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters

22 Shoptalk AIR FILTRATION Liquid Filtration Heads & Filters Filter Maintenance Kits Shoptalk Filter Performance Alternatives Worried About Water in Your Air Intake System? Sometimes you can t help operating equipment in extreme moisture environments, but it s good to know a few things to help keep your air intake system running at top efficiency. Typical Symptoms of Water Ingestion: High restriction indications Mud caked in the VacValve Wet, wavy air filter media System rust, corrosion and/or water damage Moisture-related environmental problems such as icing Simple Tips to Keep Water Out of Your System: Check and clear the VacValve daily Make sure the air cleaner cover and filter are installed properly Inspect air intake system for any leaks Caution: A water-soaked air filter will occasionally lock-up a restriction indicator! A restriction indicator s lock-up restriction level is generally marked on the indicator itself. To check an indicator, remove it, wipe the base clean, then apply a small amount of vacuum. If the indicator locks up, it is okay. If not, replace the indicator. Ref: Shoptalk Card F Air Intake Accessories for All Conditions Available from Donaldson When you need to... Mount or install an air cleaner Mounting Bands Straight Pipe Solve air intake water problems: Air Ram Inlet Hood In-line Moisture Skimmer In-line Moisture Separator Stack Top Moisture Eliminator Pre-clean or protect air inlet from debris: Inlet Hoods TopSpin Pre-Cleaner Full-View Pre-Cleaner Donaspin Air Ram Inlet Hood In-line Separator Know when to service a filter: Restriction indicators - go-no-go, lock-up styles, electric, in-field manometers, safety filter indicator Aspirate (or scavenge) an intake system: Donaspin Exhaust Ejectors Air Stack Extension Ejector Check Valve Improve dust evacuation from Vacuator Valves: Dust Dumpa Connect intake components: Rubber Elbows and Connectors Clamps Aluminum Tubing Rubber and Silicone Hump/Reducers Charge Air Connectors Ref: Donaldson Air Cleaner Catalog F

23 Caution: Replace Damaged or Missing VacValves Immediately! Shoptalk AIR FILTRATION For the longest filter service life, replace damaged or missing Vacuator Valves immediately! If your valve is cracked, torn, remains open or is missing, dust particles that are normally expelled can deposit themselves onto the filter and will shorten air filter service life. Replace it! The Vacuator Valve, standard on the majority of Donaldson air cleaners, is an important part of the functionality of the air cleaner during the precleaning stage. The Donaldson Vacuator Valve, also known as VacValve, is made in a variety of sizes and shapes to fit various applications. The Donaldson part number is molded into each part for easy identification. P Cracked? P P P Open? P P P Torn? Missing? On a standard air cleaner the dust cup, where precleaned dust is collected, is normally under a slight vacuum when the engine is running. The normal engine pulsing of the vacuum causes the VacValve to open and close. This action automatically expels any collected dust and water. The VacValve also unloads when the engine is stopped. P P For proper operation, the VacValve should be located at the lowest point on the air cleaner or with the dust cup pointing down. Ref: Shoptalk Card F & Donaldson Air Cleaenr Catalog F Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 21

24 Shoptalk AIR FILTRATION Liquid Filtration Heads & Filters Filter Maintenance Kits Shoptalk Filter Performance Alternatives Want to Change Your Air Filter Less Often? Switch to a Donaldson Endurance air filter for your on-road vehicle. It will go twice the distance we guarantee it! Features & Benefits Increases engine protection, extends service intervals, and reduces operating costs Donaldson Endurance air filters use the same filtration technology as the M1 Abrams Tank - Ultra-Web Nanofiber Filtration Technology Over 35 Donaldson Endurance air filter sizes are available for popular Donaldson air cleaners Calculate your savings over standard filters using our worksheet at datalibrary/ pdf Look for the Blue Filters! Ultra-Web Nanofiber Filtration Technology can be found in Donaldson Endurance Air Filters and Donaldson PowerCore Air Filters On-Road Air Filters Cross Reference Donaldson Donaldson Standard Primary Application Endurance P Ford FA560, CAT 2N EAF5024 P Donaldson EBA09 A/C...EAF5025 P Donaldson EBA13 A/C...EAF5026 P Navistar...EAF5097 P Donaldson EBA13 A/C...EAF5027 P Donaldson ECG11 A/C...EAF5029 P Donaldson ECG11 A/C...EAF5047 P Fram CA EAF5048 P Donaldson ECG11 A/C...EAF5053 P Donaldson ECG11 A/C...EAF5055 P Donaldson EBA13 A/C...EAF5007 P Donaldson EBA15 A/C...EAF5008 P Donaldson EBA13 A/C...EAF5014 P Donaldson EBB14 OR EBG14...EAF5015 P Donaldson EBA13...EAF5016 P Donaldson EBA11...EAF5194 P Donaldson EBB12 OR EBG12 A/C...EAF5028 P Donaldson EBB14 A/C...EAF5056 P Donaldson EBB16 A/C...EAF5095 P Donaldson EBB15 A/C...EAF5096 P Donaldson EBB16 A/C...EAF5099 P Vortox VF160R...EAF5102 P Ford E3TZ9601C...EAF5187 P IHC C1...EAF5188 P Ford E2HZ9601B...EAF5189 P Donaldson EBA11 A/C...EAF5061 P MCI Bus 9G EAF5065 P Freightliner...EAF5066 P GM , Ford F3HZ9601A...EAF5067 P Donaldson EPG15 A/C, Freightliner Navistar C1...EAF5069 P Navistar C1...EAF5104 P Kenworth T2000 through 10/ EAF5109 P Freightliner FLB, Peterbilt EAF5106 P Kenworth, Peterbilt, DCI ERA13...EAF5100 P Kenworth, Peterbilt, DCI ERA15...EAF5101 P Volvo EAF5098 P Kenworth T /1998 on, Peterbilt EAF5107 P Mack 57MD46M, 57MD48M, 81SF28...EAF5108 P Mack, RVI...EAF5074 Off-Road Air Filters Cross Reference Donaldson Donaldson Standard Primary Application Endurance P Donaldson FWA14, FWG14 A/C...EAF5000 P Donaldson FWA16, FWG16 A/C...EAF5001 P Donaldson FHG16 A/C...EAF5002 P Donaldson FHG12 A/C...EAF5034 P Donaldson FWA12, FWG12 A/C...EAF5035 P Donaldson SRG20, SRG29 A/C...EAF5038 P Donaldson STG16 A/C...EAF5039 P Donaldson SRG20, SRG29 A/C...EAF5040 P Donaldson STG14 A/C...EAF5041 P Donaldson STG16 A/C...EAF5042 P Donaldson FVG14 A/C...EAF5043 P Donaldson STG12 A/C...EAF5044 P Donaldson FHG14 A/C...EAF5046 P Donaldson FWD16 OR FVG16 A/C...EAF5057 P Donaldson FVG16 A/C...EAF5049 P Donaldson FRG11 A/C...EAF5105 P Donaldson SSG A/C...EAF5152 P Donaldson SSG A/C...EAF5153 Ref: Shoptalk Card F & BrochureF

25 Take a Look at Air Filtration Efficiency and Dust Holding Capacity Compare for yourself see how much dust can pass through your air filter during 500 hours of operation. Donaldson Endurance Air Filters Ultra-Web Filter Media 99.99% Filtration Efficiency 0.1 gram dust Donaldson Air Filters Standard Filter Media 99.9% Filtration Efficiency 1 gram dust Will-fit Air Filters Standard Filter Media 99.0% Filtration Efficiency 10 grams dust You Can See the Difference! These dust vials show the actual amount of Arizona fine test dust that passes through the air filter media for every 1 kilogram of dust fed to the air filter, which is equivalent to 500 hours* of equipment operation. Will-fit filters can allow up to 100 times more dirt to pass through the filter into the engine than Donaldson Endurance air filters with Ultra-Web filter media. * Estimate based upon typical medium dust operating conditions with 92% precleaner efficiency. Actual results may vary. Donaldson Ultra-Web nanofiber filtration technology delivers cost saving benefits: Superior filtration Long filter life with submicron contaminant Highest efficiency Ideal for extended maintenance intervals Longer engine life Don t leave engine protection to chance! Use Donaldson Endurance air filters with the blue Ultra-Web nanofiber media for maximum filtration efficiency and superior dust holding capacity. Ref: Shoptalk Card F All Nanofibers are Not Created Equal Shoptalk AIR FILTRATION Since Donaldson Torit first introduced Ultra-Web nanofiber cartridge filters to industrial manufacturers 25 years ago, the technology has been continually advanced and perfected in the field to perform in all ambient conditions. In 1993 Ultra-Web nanofiber technolay was introduced into engine air filters. Ultra-Web nanofiber filtration technology strikes just the right balance between the strength of the fiber density of the web and the level of filtration. Ultra-Web nanofibers produce a very fine, continuous fiber that form a permanent web-like net that traps dust on the surface of the filter media. Longer Filter Life Ultra-Web technology is proven and perfected to last at least two times longer than conventional filters. What s the secret? Ultra-Web technology keeps particulate on the surface of the media. Filtration scientists attribute surface loading of dust with lower operating pressure drop over a much longer period of time. Ultra-Web Nanofiber Technology 10 Micron Particulate At 600% CELLULOSE CELLULOSE/SYNTHETIC SPUNBOND MELTBLOWN Ref: Shoptalk Card F and 23 Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters

26 Shoptalk AIR FILTRATION Filter Performance Alternatives Don t Throw Away a Good Filter Just Because it Might Look Dirty Choose Restriction Measurement Tools that Best Fit Your Applications Donaldson offers a variety of restriction measuring devices that help you get maximum filter utilization. All measure restriction in inches of water vacuum. All are resistant to vibration, breakage, weather, corrosion, dust and dirt to assure reliable filter restriction readings. Although this air filter may look dirty It can go plenty more miles. Installation of a restriction indicator can save you money and time. Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters Why Service By Restriction? Proper air cleaner servicing will result in maximum engine protection against the ravages of dust. Proper servicing can also save you time and money by increasing filter life and dust cleaning efficiency. By using proper filter restriction measurement tools you will use the full life of the filter at maximum efficiency. DON T BE FOOLED by filter appearance: it should look dirty. The only way to determine when a filter is plugged or plugging is to measure the restriction on the system with the engine working at max airflow. Two of the most common air cleaner servicing problems are: 1. Over-servicing: the least efficient time in the life of the filter is when it is new. Filter elements increase in efficiency as dust builds up on the media. 2. Improper servicing: your engine is highly vulnerable to abrasive dust contaminants during the servicing process when the filter is removed from the housing. A leading cause of engine damage is due to careless servicing procedures. Continuous Reading devices show how much life is left in the filter: The Informer Service Gauge for Instrument Panel Go/No-Go restriction readings on heavy-duty vehicles: ServiSignal Visual Restriction Indicator Electrical Indicator SafetySignal for safety filters In-Field restriction readings on light and medium-duty vehicles: In-Field Service Gauge Kit Ref: Shoptalk Card F & Air Cleaner Catalog F

27 Shoptalk AIR FILTRATION Keep Those ECG Konepac Air Cleaner Latches Inspected ECG style air cleaners have three cover latches that need to perform correctly to ensure the element gasket is sealing properly. These latches should be checked for tightness and wear. To check for tightness, close all three latches, then open and close them one at a time. There should be good tension and should snap tightly when closed. If any latches seem loose or rattle, they should be replaced. The spring clip and pin repair kit is X and fits all ECG style air cleaners. The most obvious place to check for wear is the spring latch tip (the part that hooks into the notch on the filter cover). The tip may become sharp and cut into the filter cover with extended wear. The tip may also wear to the point where it will not hook onto the filter cover at all. If any of these conditions are evident, the latch should be replaced. Ref: Shoptalk Card F Dust Dumpa Solves Dust Expulsion Issues in High Dust Environments Ideally suited to equipment operating in mining, construction and quarrying. The Dust Dumpa reduces maintenance and saves you time and money. Improves dust evacuation from the air cleaner Clear tube allows for visual inspection of dust collection. Operations can perform walk around air cleaner inspection which saves time. Improves safety of the air cleaner inspection process by eliminating the need for ladders or elevated platforms for daily inspections Keeps operators and maintenance personnel away from the nuisance dust normally encountered during air cleaner servicing operations. Improves vehicle up time by minimizing pre/post shift air cleaner inspections, thus facilitating increased air cleaner service intervals. Ships fully assembled Proper conversion requires drop down tube for every dust cup Part No. X (includes dust cup seal) Dust Dumpa Part No. X When the Dust Dumpa kit (X006562) is installed on the dust cups on the lower assembly of a Donaldson S Series air cleaner, the rubber connector vibrates during normal vehicle operation and gravity expels the pre-cleaned dust. The Dust Dumpa kit, X (without the dust cup), is an add on to newer Donaldson air cleaners models including our PowerCore PSD 10" and 12" and SSG Series. For more information, see the intake accessories section of our air cleaner catalog or contact your local Donaldson distributor. Ref: Air Cleaner Catalog F Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 25

28 Shoptalk AIR FILTRATION Filter Performance Alternatives What s Donaldson s Position Air Filter Cleaning & Reuse? Donaldson recommends servicing air filters by monitoring the air flow restriction levels in the intake system. DO NOT clean and reuse Donaldson filters. Some vehicle owners and maintenance supervisors, concerned with lowering their operating costs, will clean and reuse their heavy-duty air filters. Before you decide whether cleaning or washing of air filters is appropriate for your vehicle or fleet, please consider these factors: Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters Heavy-duty air filtration manufacturers do not recommend any type of cleaning process be used on their products. Donaldson, like other heavy duty air filter manufacturers, does not warrant the air filter once it has been cleaned. Filter dirt holding capacity is reduced 20-40% with each cleaning. Rather than cleaning or reusing filters, consider upgrading to an extended service filter and service the filter by restriction. There is a risk of dirt reaching the clean side of the filter while cleaning, plus possible filter damage from high pressure water or compressed air, makes cleaning or washing a gamble. Add the cost of cleaning to the danger of filter damage when determining the risk versus the value of filter cleaning process. Damaged filters should not be cleaned or reused. If a filter is damaged in service, investigate the source of damage and make corrections to avoid future damage. Reusing a cleaned heavy duty filter increases the likelihood of improper air cleaner servicing because of the shortened service life. Each time the air intake system is serviced, it is exposed to the chance of contamination. Never attempt to clean a safety filter. Replace it after three primary filter services. Ref: Air Cleaner Catalog F

29 Shoptalk HYDRAULIC FILTRATION How Big is a Micron? Micron Sizes of Familiar Particles Grain of table salt 100µm Human hair 80µm Lower limit of visibility 40µm White blood cell 25µm Talcum powder 10µm Red blood cell 8µm Bacteria 2µm Silt <5µm How Big is a Micron? 40µm 80µm 25µm 100µm 10µm 2µm Minimize Water in Hydraulic Systems Water has a way of sneaking into hydraulic circuits and that means trouble. Donaldson T.R.A.P. breathers actually exhale the moisture back out, which means you won t need to change the breather due to water saturation unlike desiccant filters that require frequent change-out. Like the name suggests, it TRAPS water before it gets in, yet doesn t restrict air flow, and lets your hydraulic reservoir breathe. Features and Benefits Minimize water in your system - T.R.A.P. breather strips moisture from the incoming air, allowing only dry air to enter the hydraulic circuits Maximize system uptime - Patented T.R.A.P. media regenerates its water holding capacity for longer service life Hydraulic reservoir can breathe - The T.R.A.P. doesn t restrict air flow T.R.A.P. Parts Table Max. Flow Connection CFM Material Part No. Indicator Style* 1" NPT 45 cfm Glass-filled ABS P Opt'l Mechanical 1" NPT 45 cfm Glass-filled ABS P Electronic 3/4" BSP 25 cfm Epoxy coated steel P No 3/4" NPT 25 cfm Epoxy coated steel P Opt'l Mechanical Bayonet 25 cfm Epoxy coated steel P No Bayonet 45 cfm Glass-filled ABS P No Bayonet 45 cfm Glass-filled ABS P Electronic Mechanical Indicator Kit - P Install kit between reservoir and T.R.A.P. breather. Lock-up style indicator with manual reset. Highly visible, bright red band shows when restriction limit is reached. Indicator setting, 20" H2O. Ref: Brochure F Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 27

30 Shoptalk HYDRAULIC FILTRATION Liquid Filtration Heads & Filters Filter Maintenance Kits Shoptalk Filter Performance Alternatives Understanding the Beta Rating System This information is provided as an aid to understanding fluid filter efficiency terminology based on current ISO, ANSI and NFPA test standards. It is not proprietary and may be reproduced or distributed in any manner for educational purposes. What Is Beta Ratio? Beta ratio (symbolized by ß) is a formula used to calculate the filtration efficiency of a particular fluid filter using base data obtained from multi-pass testing. In a multi-pass test, fluid is continuously injected with a uniform amount of contaminant (i.e., ISO medium test dust) then pumped through the filter unit being tested. Filter efficiency is determined by monitoring oil contamination levels upstream and downstream of the test filter at specific times. An automatic particle counter is used to determine the contamination level. Through this process an upstream to downstream particle count ratio is developed, known as the beta ratio. The formula used to calculate the beta ratio is: Beta ratio (x) = particle count in upstream oil particle count in downstream oil where (x) is a given particle size Indicates that testing was done with APC s calibrated with NIST fluid ß 10(c) = times more particles upstream than downstream that are 10 µm and larger Compatibility of Donaldson Filter Media with Hydraulic Fluids While Donaldson has developed many formulations of media, they can be divided into two broad categories: natural fibers, usually cellulose, and synthetic or man-made fibers. Fluid to be Filtered Petroleum-based Phosphate Ester Diester Water Glycol Water-Oil Emulsion Biodegradable Fluid HWCF (high water content fluids) Coarse Filtration A Note on Seals Recommended Media Synteq Cellulose Synteq Synteq Synteq Synteq Synteq Synteq Wire Mesh Filters with seals made of BunaN are appropriate for most applications involving petroleum oil and some high water content fluids. Filters with seals made of Viton or Fluorel (both fluoroelastomers) are required when using diesters, phosphate ester fluids. Donaldson offers both types. (Viton is a registered trademark of DuPont Dow Elastomers, and Fluorel is a registered trademark of 3M Company.) In Donaldson filters with fluorocarbon elastomer seals, epoxy potting is used to accommodate higher temperature environments and for compatibility with fluids such as phosphate ester and high water based fluids. The plastisol (heat cured) and urethane (self curing) potting materials used in other filters perform well with petroleum-based fluids. 28

31 Filter Maintenance Kits Filtro de kits de mantenimiento Filter Kits de maintenance Filter Wartungs-Kits Filtro kit di manutenzione Engine Liquid Filter Kits Everything You Need in One Package! Features: Hundreds of pre-assembled engine filter kits to choose from Kits for popular engines and equipment Order just one part number instead of many Standard or extended service product kits available Benefits: Simplified service and maintenance for popular engine and equipment brands Save on inventory and shelf space We make it easy by doing all the application and product searching for you For fleet owners that perform their own vehicle maintenance, our all-in-one packaged engine liquid kit can simplify service, ordering and storage. NOTE regarding kits that contain coolant filters: The coolant products we sell are considered a Class 5 hazardous product (in the U.S.). Because of this classification, there are restrictions on shipping these products using small package carriers. Engine Liquid Filter Kits Carrier Caterpillar Cummins Detroit Diesel Mack Mercedes Moffett Engineering Navistar Sterling/Mercedes Thermo King Volvo Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 29

32 Filter Maintenance Kits Filtro de kits de mantenimiento Filter Kits de maintenance Filter Wartungs-Kits Filtro kit di manutenzione Filter Maint Kits Carrier Kit No: P CARRIER REFRIGERATION UNITS Kit Contents Qty Description P LUBE SPIN-ON BYPASS P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW Caterpillar Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P FUEL/WATER SEPARATOR SPIN-ON Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P COOLANT SPIN-ON P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description ELF LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P LUBE SPIN-ON BYPASS P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P LUBE SPIN-ON FULL FLOW Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P CATERPILLAR ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P CATERPILLER ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P CATERPILLER ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY Kit No: P CATERPILLER ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P COOLANT SPIN-ON P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P CATERPILLER ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P COOLANT SPIN-ON P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY Cummins Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON BYPASS P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON COMBINATION P COOLANT SPIN-ON Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Page 30

33 Filter Maintenance Kits Filtro de kits de mantenimiento Filter Kits de maintenance Filter Wartungs-Kits Filtro kit di manutenzione Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON P LUBE SPIN-ON FULL FLOW Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P LUBE SPIN-ON COMBINATION P COOLANT SPIN-ON Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR SPIN-ON P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P COOLANT SPIN-ON P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION P FUEL/WATER SEPARATOR SPIN-ON Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P COOLANT SPIN-ON P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR SPIN-ON P COOLANT SPIN-ON P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description ELF LUBE SPIN-ON FULL FLOW P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON SECONDARY Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON COMBINATION Kit No: P CUMMINS ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P COOLANT SPIN-ON P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON COMBINATION Detroit Diesel Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON BYPASS P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description ELF LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Filter Maint Kits Page 31

34 Filter Maintenance Kits Filtro de kits de mantenimiento Filter Kits de maintenance Filter Wartungs-Kits Filtro kit di manutenzione Filter Maint Kits Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P COOLANT SPIN-ON P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description ELF LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P DETROIT DIESEL ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P DETROIT DIESEL SERIES 60 ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON FULL FLOW Mack Kit No: P MACK Kit Contents Qty Description P LUBE CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON FULL FLOW Kit No: P MACK DAY CAB Kit Contents Qty Description P LUBE CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON FULL FLOW Page 32 Kit No: P MACK E7 ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE CARTRIDGE P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P MACK E7 ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE CARTRIDGE P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P MACK E7 ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P MACK E7 ENGINES Kit Contents Qty Description P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P MACK E7 ENGINES Kit Contents Qty Description P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P MACK ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE CARTRIDGE P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON FULL FLOW Kit No: P MACK ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P LUBE CARTRIDGE P FUEL/WATER SEPARATOR SPIN-ON P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P LUBE CARTRIDGE P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P COOLANT SPIN-ON P COALESCING FILTER Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON SECONDARY Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY

35 Filter Maintenance Kits Filtro de kits de mantenimiento Filter Kits de maintenance Filter Wartungs-Kits Filtro kit di manutenzione Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P LUBE CARTRIDGE P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P LUBE CARTRIDGE P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY Kit No: P MACK ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON FULL FLOW P LUBE CARTRIDGE P COOLANT SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE CARTRIDGE P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON Kit No: P MACK ENGINES Kit Contents Qty Description P LUBE SPIN-ON FULL FLOW P LUBE CARTRIDGE P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY P COOLANT SPIN-ON Mercedes Kit No: P MERCEDES ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE P LUBE CARTRIDGE FULL FLOW Kit No: P MERCEDES ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P FUEL CARTRIDGE P LUBE CARTRIDGE FULL FLOW Moffett Equipment Kit No: P MOFFET EQUIPMENT Kit Contents Qty Description P P , FINNED P HYDRAULIC SPIN-ON P FUEL CARTRIDGE Navistar Kit No: P NAVISTAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY Kit No: P NAVISTAR ENGINES Kit Contents Qty Description P FUEL SPIN-ON SECONDARY P COOLANT SPIN-ON P LUBE SPIN-ON FULL FLOW P FUEL SPIN-ON PRIMARY Sterling / Mercedes Kit No: P STERLING, MERCEDES Kit Contents Qty Description P FUEL/WATER SEPARATOR SPIN-ON P FUEL CARTRIDGE P LUBE CARTRIDGE FULL FLOW Thermo King Kit No: P THERMOKING REFIRIGERATION UNITS Kit Contents Qty Description P FUEL BOX PRIMARY P FUEL/WATER SEPARATOR BOX P LUBE SPIN-ON COMBINATION Volvo Kit No: P VOLVO Kit Contents Qty Description P LUBE SPIN-ON BYPASS P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P VOLVO ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON BYPASS P FUEL/WATER SEPARATOR CARTRIDGE P LUBE SPIN-ON FULL FLOW Kit No: P VOLVO ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON BYPASS P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Kit No: P VOLVO ENGINES Kit Contents Qty Description P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON BYPASS P LUBE SPIN-ON FULL FLOW Kit No: P VOLVO ENGINES Kit Contents Qty Description P LUBE SPIN-ON BYPASS P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P VOLVO ENGINES Kit Contents Qty Description P LUBE SPIN-ON BYPASS P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW Kit No: P VOLVO ENGINES Kit Contents Qty Description P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON SECONDARY P LUBE SPIN-ON COMBINATION Kit No: P VOLVO ENGINES Kit Contents Qty Description P LUBE SPIN-ON BYPASS P FUEL/WATER SEPARATOR CARTRIDGE P FUEL SPIN-ON PRIMARY P LUBE SPIN-ON FULL FLOW P COOLANT SPIN-ON Filter Maint Kits Kit No: P VOLVO , RACOR R260P Kit Contents Qty Description P GASKET P FUEL/WATER SEPARATOR SPIN-ON Page 33

36 Product Descriptions Descripción de producto Les descriptions de produits Produktbeschreibungen Filter Performance Alternatives Shoptalk Liquid Filtration Heads & Filters Product Descriptions English Español Français German Air Breather Respiradero filtre à air Be- Entlüftungsfilter Air Cleaner Filtro de aire Filtre à air Luftfilter Air Dryer Secador de aire Dessiccateur Trockenmittelbox Air Filter Filtro de aire Filtre à air Luftfilter Air Filter Kit Juego de filtro de aire Kit pour filtre à air Luftfilter-Kit Air Panel Elemento de habitáculo Panneau filtre à air Kabinenfilter Air Primary Elemento principal de aire Filtre à air Principal Hauptelement Air Safety Elemento de filtro secundario Elément de sécurité Sicherheitselement Air/Oil Separator Desoleador Séparateur air/huile Ölabscheider Breather Respiradero Filtre à air Be-Entlüftungsfilter Breather Adapter Adaptador Para Respiradero Adaptateur de filtre à air Adapter für Be- Entlüftungsfilter Cabin Air Filter Filtro para cabina Filtre de cabine Kabinenfilter Coalescing Filter Filtro de condensación Filtre coalescent Koaleszenz-Filter Coolant Cartridge Cartucho para circuito Cartouche pour liquide de refrigerante refroidissement Kühlwasserfilter Coolant Filter Filtre pour liquide de Filtro para circuito refrigerante refroidissement Kühlwasserfilter Coolant Spin-On Filtro roscado para circuito Filtre à visser pour liquide de refrigerante refroidissement Kühlwasserfilter Fuel Cartridge Cartucho combustible Cartouche à carburant Kraftstofffilter Fuel Filter Filtro de combustible Filtre à carburant Kraftstofffilter Fuel Filter Water Filtro separador agua/ Kraftstoff- Filtre séparateur eau/carburant Separator combustible Wasserabscheider Fuel Spin-On Filtro roscado de combustible Filtre à carburant à visser Kraftstofffilter Gasket Junta Joint d'étanchéité Dichtung Hydraulic Assembly Conjunto hidráulico Filtre hyd. complet Hydraulikfilter Hydraulic Cartridge Cartucho hidráulico Cartouche hydraulique Hydraulikfilter Hydraulic Filter Filtro hidráulico Filtre hydraulique Hydraulikfilter Hydraulic Spin-On Filtro roscado hidráulico Filtre à visser hydraulique Hydraulikfilter Liquid Filter Kit Filtros para líquidos Kit filtre liquide Filterkit Lube By-pass Filtro de aceite con derivación Filtre à huile bipass Ölfilter Lube Cartridge Cartucho de aceite Cartouche Filtre à huile Ölfilter Lube Filter Filtro de aceite Filtre à huile Ölfilter Lube Spin-on Filtro roscado de aceite Filtre à visser huile Ölfilter O-Ring Junta tórica Joint torique O-Ring Pre-Cleaner Préfiltre Prefiltro Vorfilter Screen Element Elemento pantalla Élément écran Bildschirm Trans. Filter Kit. Trans. Kit de Filtros Kit filtre trans. Getriebe-Filter-Kit Transmission Filter Filtro de transmisión Filtre pour transmission Getriebeölfilter Vacuator Valve Válvula de evacuación Valve d'évacuation Vakuator-Ventil Vapor Emission Pad Emisión de vapor del amortiguador Protection d'émission de vapeur Washer Gasket Arandela de goma Rondelle d'étanchéité Dichtung Wing Nut Tuerca mariposa Écrou à oreilles Flügelmutter 34

37 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri The following section features popular head assemblies and their matching filters for fuel, lube, coolant and hydraulic filtration. Fuel Heads & Filters gph / lph fuel flow range gph / lph fuel flow range gph / lph fuel flow range Up to 90 gph / 340 lph fuel flow range Selection for existing OE applications Lube Heads & Filters Selection for existing OE applications includes extended service filter choices Coolant Head, Mounting Bracket & SCA Filters This single head fits many coolant filters all with various amounts of coolant additive units. Extended service and time release filters are also available. Three- and four-ply coolant hoses in various diameter sizes are available. Hydraulic Heads & Filters Two low pressure series - LPS04 and HBK05 Low pressure filters are the most commonly used type of filter in hydraulic circuits, used most often as return line filters in applications with working pressures up to 1000 psi, depending upon model selected. Three Duramax medium-pressure series - HMK03, HMK04, HMK05 Donaldson s famous Duramax filters are the highest rated medium pressure filters available in a spin-on configuration. Duramax filters are reliable, sturdy, long-lived and easy to install. Most often used as return-line filters, they are designed for working pressures up to 1000 psi and static pressures up to 2000 psi. Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 35

38 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Filter Performance Alternatives Fuel Flow Range: gph / lph Head Assemblies Filter Choices: (flow ranges listed are maximums) Outer Dia.: 3.02" (77 mm) Two Mounting Holes.34 / 8.6 mm Bleed Valve 1/4-18 NPT Ports (2) Threaded Stud: M16 x 1.5 : 3.25" / 83 mm Width: 3.25" / 83 mm Part No. P /2-20 UNF Ports (2) Threaded Stud: M16 x 1.5 : 3.25" / 83 mm Width: 3.25" / 83 mm FFWS-Twist&Drain 20µ 99% 15 gph / 57 lph : 3.75 / 95 mm Part No. P FFWS-Twist&Drain 25µ 99% 30 gph / 144 lph : 5.55 / 141 mm Part No. P FFWS- Twist&Drain 11µ 99% 30 gph / 144 lph : 5.55 / 141 mm Part No. P Shoptalk Part No. P /4-18 NPT Ports (2) Threaded Stud: M16 x 1.5 : 4.02" / 102 mm Width: 3.10" / 79 mm Part No. P Oil Mist Coalescer 2 CFM : 2.57 / 65 mm Part No. P Filter Maintenance Kits Liquid Filtration Heads & Filters Fuel Flow Range: Up to 90 gph / 340 lph Head Assemblies 1/2-14 NPT Ports (4) Threaded Stud: m95 x 2.5 6H : 5.06 / 129 mm Width: 5.35 / 136 mm Part No. P /2-14 NPT Ports (4) Air Relief Valve Manual Priming Pump Threaded Stud: m95 x 2.5 6H : 5.06 / 129 mm Width: 5.35 / 136 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 3.82 (93 mm) Filter 5µ Cellulose 90 gph / 340 lph : 6.10 / 155 mm Part No. P FFWS- Twist&Drain 20µ Cellulose 90 gph / 340 lph : 6.10 / 155 mm Part No. P Twist&Drain - A Simple & Easy Drain Valve Draining existing styles of fuel filter water separators can not only be messy, but can take more time to drain. If you re looking for a simple and quick way to eliminate the water from your fuel filter - consider installing a Donaldson filter system with a Twist&Drain valve. Large handle is easy to grasp and operate Free-flowing drain for fast water elimination Self-venting design allows water to evacuate in a quick, steady stream not a slow drip (no need to open a secondary vent) Up to a single turn to begin draining Filter 10µ Cellulose 90 gph / 340 lph : 6.10 / 155 mm Part No. P Pat. Pending 36

39 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Fuel Flow Range: gph / lph Head Assemblies Filter Choices: (flow ranges listed are maximums) Outer Dia.: 3.66 (93 mm) Head Assembly Water level sensor terminal Three Mounting Holes.38 / 9.6mm 1/2 NPT Threaded Stud: 1-14 : 3.70" / 94 mm Height: 2.40" / 61 mm Part No. P /8 SAE Threaded Stud: 1-14 : 3.70" / 94 mm Height: 2.40" / 61 mm Part No. P /8-14 Ports (2) Threaded Stud: 1 1/4-12 : 6.24 / 159 mm Width: 4.96 / 126 mm Part No. P Head has two inlet ports (on top) and two outlet ports (side) for design flexibility. Filter Choices: Outer Dia.: 4.25 (108 mm) FFWS 25µ 99% 75 gph / 284 lph : 5.86 /149 mm Part No. P FFWS-Twist&Drain 20µ 99% 90 gph / 341 lph : 7.34 /187 mm Part No. P FFWS-Twist&Drain 7µ 99% 120 gph / 454 lph : 9.67 / 246 mm Part No. P Filter 25µ 99% 40 gph / 151 lph : 4.21 / 107 mm Part No. P Filter 2µ 99% 100 gph / 378 lph : 6.87 / 174 mm Part No. P Fuel Flow Range: gph / lph Filter 15µ 99% 60 gph / 227 lph : 7.05 /179 mm Part No. P FFWS 10µ Cellulose 180 gph / 681 lph : / 288mm Part No. P FFWS 10µ 99% Synthetic Media 100 gph / 378 lph : 7.34 /187 mm Part No. P FFWS-Twist&Drain 25µ 99% 100 gph / 378 lph : 8.36 / 212 mm Part No. P FFWS-Twist&Drain 10µ 99% Synteq Media 120 gph / 454 lph : 9.67 / 246 mm Part No. P Filter 25µ 99% 60 gph / 227 lph : 5.35 / 136 mm Part No. P Filter 3µ 99% 160 gph / 606 lph : 9.17 / 233 mm Part No. P FFWS 25µ 99% 180 gph / 681 lph : / 288mm Part No. P Electronic (12V or 24V DC) water level sensor Part No. P Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 37

40 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Filter Performance Alternatives Replacement Fuel Heads and Filters for Popular OE Applications Head Assembly 7/8-14 NPT Ports (2) Threaded Stud: 1 1/4-12 UNF : 5.56"/ 141 mm Width: 4.73" / 120 mm Part No. P /8-18 NPTF Ports (2) Threaded Stud: 1 1/4-12 UNF : 4.84 / 123 mm Width: 4.73" / 120 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 4.66 (188 mm) FFWS 25µ 99% 250 gph / 946 lph : /314 mm Part No. P Filter 9µ 99% 235 gph / 890 lph : /260 mm Part No. P FFWS 10µ 99% 250 gph / 946 lph : /314 mm Part No. P Filter 30µ 99% 200 gph / 757 lph : 8.94 /118 mm Part No. P Shoptalk Filter Maintenance Kits Head Assembly 3/8-18 NPTF Ports (2) Threaded Stud: 1 1/16-16 UNF : 5.20"/ 132 mm Width: 4.73" / 120 mm Part No. P Head Assembly 1/4 NPTF Ports (3) Threaded Stud: 13/16-12 : 3.85" / 98 mm Width: 4.88" / 124 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 4.66 (118 mm) Filter 16µ 99% 250 gph / 946 lph : 8.94 /118 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 3.66 (93 mm) Filter 9µ 99% 90 gph / 340 lph : 6.85 /174 mm Extended Service Filter 5µ 99% Synteq Media 150 gph / 568 lph : 8.94 /118 mm Part No. EFF0047 Filter 3µ 99% : 90 gph / 340 lph : 6.85 /174 mm Part No. P Part No. P Liquid Filtration Heads & Filters Filter 16µ 99% 40 gph / 151 lph : 4.21 /107 mm Part No. P Extended Service Filter 5µ 99% Synteq Media 60 gph / 227 lph : 6.85 /174 mm Part No. EFF

41 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Replacement Lube Heads and Filters for Popular OE Applications Head Assembly 3/4"-14 NPTF Ports (2) By-pass Valve: 25 psi / 172 kpa Threaded Stud: 1"-12 UNF 2A Height: 2.40"/ 61 mm Width: 3.74" / 95 mm Part No. P Head Assembly 3/8"NPT Ports (2) By-pass valve: 25 psi / 172 kpa Threaded Stud: 1 3/8"-16 UN2A : 5.20"/132 mm Width: 4.73 / 120 mm Part No. P Head Assembly 1-1/4 NPT Ports (2) Threaded Stud: 1-1/2"-12 Width: 5.52 / 140 mm Bypass Valve: 40 psid Part No. P Mounting Head Adapter Threaded Stud: 1-1/2-12 UNF-2A Height: 1.73"/ 44 mm Width: 5.20"/132 mm Part No. P Head Assembly 1-5/8" 12 Ports (2) Threaded Stud: 2-1/4"-12 Width: 5.00 / 127 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 3.66 (193 mm) Filter 20µ 50% 20 gpm, / 76 lpm : 6.85"/ 174 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 4.66 (118 mm) By-pass Filter 14µ 50% 7.5 gpm, / 28 lpm : 10.24" / 260 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 4.66 (118 mm) Filter 14µ 50% 45 gpm, / 170 lpm : 10.24"/ 260 mm Part No. P Filter Choices: (flow ranges listed are maximums) Outer Dia.: 4.66 (118 mm) Filter 22µ 99% 50 gpm, / 184 lpm : 11.70"/ 297 mm Part No. P Filter 20µ 50% 15 gpm, / 57 lpm : 5.35"/136 mm Part No. P Extended Service Filter 15µ 99% Synteq Media 45 gpm, / 170 lpm : 10.24"/ 260 mm Part No. ELF7670 Extended Service Filter 15µ 99% Synteq Media 25 gpm, / 95 lpm : 6.22"/ 158 mm Part No. ELF7947 Filter 15µ 99% 35 gpm, / 132 lpm : 8.90"/ 227 mm Part No. P Extended Service Filter 15µ 99% Synteq Media 50 gpm, / 184 lpm : 11.70"/ 297 mm Part No. EFF7300 Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 39

42 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Filter Performance Alternatives Coolant Head & Filters The Donaldson remote mount head is designed to fit all our spin-on filters with a 11/16-16 threads. The bracket can be mounted to the head of the fire wall or some off-engine location. Head Assembly 3/8" NPTF Ports (2) Threaded Stud: 11/16-16" : 3.60"/ 91 mm Width: 3.60"/ 91 mm Part No. P Filter Choices: Outer Dia.: 3.66 (93 mm) Units Printed on Filter 0 P P P P P P SCA Filter No. Mounting Bracket Part No. P Extended Service Filters 150,000 mile / 195,000 km service interval Shoptalk Non-chemical filters will go the distance of your coolant; for Organic Additive Technology and Extended Service Coolant Users Type Non Chemical Time Release Filter Part No. ECF4085 ECF4088 Filter Maintenance Kits Liquid Filtration Heads & Filters Coolant Hose 3-ply hose is reinforced with three layers of polyester fabric and coated with a unique silicone elastomer. Size (inner dia.) Part Nominal O.D. Recommended Clamp in mm No. in mm Lined Constant Torque P P N/A P P N/A P P N/A P P N/A P P N/A P P N/A P P N/A P P N/A P P N/A P P N/A P P P P P P P P P P P P P P P P P P P P P P P P P P P ply hose is reinforced with an added layer of polyester fabric and provides even greater resistance to abrasion and rubbing. Size (inner dia.) Part Nominal O.D. Recommended Clamp in mm No. in mm Lined Constant Torque P P N/A P P N/A P P P P P P P P P P P P ply hose 3 ft./0.91m lengths 4-ply hose 3 ft./0.91m lengths Designed to withstand extremes in operating temperatures ranging from -65ºF to 350ºF (-54ºC to 177ºC).

43 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Hydraulic - Low Pressure Family LPS04 LPS04 Series Specifications Head Choices for LPS04 Port Bypass Gauge ports Gauge Port Donaldson Size Range (drill, tap, plug) Location Part No. ½ NPT 15 psi / kpa / 1.34 bar (2) 1/8 NPT upstream side P ¾ NPT 25 psi / kpa / 1.72 bar (2) 1/8 NPT upstream side P psi / 34.5 kpa /.34 bar (2) 1/8 NPT downstream side P psi / kpa / 1.72 bar none na P psi / 34.5 kpa /.34 bar none na P none none na P psi / kpa / 1.34 bar none na P SAE-12 none none na P none (1) SAE-4 upstream side, LH P psi / 34.5 kpa /.34 bar none na P psi / kpa / 1.72 bar none na P psi / kpa / 1.34 bar none na P psi / kpa / 1.72 bar (2) 1/8 NPT upstream side P psi / kpa / 1.34 bar none M6 mtg. Thrds P SAE-8 25 psi / kpa / 1.72 bar none na P Spin-on Filter Choices Media Donaldson Type Bx(c) =200 Bx(c) = 1000 (in./mm) Part No. Cellulose /136 P Cellulose /136 P Cellulose /200 P Cellulose /136 P Cellulose /200 P Synteq /200 P Synteq /136 P Synteq /200 P Synteq /136 P Synteq /136 P Water absorbing* /136 P Wire Mesh /136 P * Absorbs Approx. 6 oz/170 ml of 20 psid Product Flow Range Pressure (NFPA/t ) Porting Types Family Working Static LPS gpm 150 psi 300 psi ½, ¾ NPT, or l/min 1034 kpa 2070 kpa SAE-8 (½ ), SAE-12 (¾ ) 10.3 bar 20.7 bar O-Ring Where and Why Use Low pressure filters are the most commonly used type of filter in hydraulic circuits, used most often as return line filters in applications with working pressures up to 1000 psi, depending upon model selected. Mix n Match... Select the head and filter combination to build a filter system to suit your specifications 41 Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters

44 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Filter Performance Alternatives Hydraulic - Low Pressure Family HBK05 HBK05 Series Specifications Product Flow Range Pressure (NFPA/t ) Porting Types Family Working Static HBK gpm 150 psi 250 psi SAE-20 (1¼ ) l/min 1034 kpa 1724 kpa O-Ring, 10.3 bar 17.2 bar or 1¼ NPT Where and Why Use Low pressure filters are the most commonly used type of filter in hydraulic circuits, used most often as return line filters in applications with working pressures up to 1000 psi, depending upon model selected. Shoptalk Filter Maintenance Kits Mix n Match... Select the head and filter combination to build a filter system to suit your specifications Head Assemblies Port Size Bypass Rating Indicator Part Style & Location No. 1¼ NPT 25 psi / 172 kpa Visual, Both Sides P ¼ NPT 5 psi / 34 kpa Visual, Both Sides P SAE-20 O-Ring 25 psi / 172 kpa Visual, Both Sides P Donaldson uses the inlet port as the reference point. "Left side," for instance, means that the indicator mounts on the side of the filter head that is on your left when you face the inlet port. Spin-on Filter Choices Part Bx(c) = 1000 (in.) (mm) No. <3µm P with Viton Seal 6µm P P µm P P µm P P µm P with Viton Seal P with Viton Seal 23µm P P >50µm P P Liquid Filtration Heads & Filters 42

45 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Hydraulic - Original Duramax HMK03 HMK03 Series Specifications Product Flow Range Pressure (NFPA/t ) Porting Types Family Working Static HMK gpm 1000 psi 2000 psi SAE-12 O-Ring 0-95 l/min 6895 kpa kpa 69 bar bar Where and Why Use Donaldson s famous Duramax filters are the highest rated medium pressure filters available in a spin-on configuration. Duramax are reliable, sturdy, long-lived and easy to install. Most often used as return-line filters, they are designed for working pressures up to 1000 psi and static pressures up to 2000 psi. Mix n Match... Select the head and filter combination to build a filter system to suit your specifications Head Assemblies Spin-on Filter Choices Port Bypass Indicator Head Size Rating Part No. SAE-12 No Bypass None* P ¾ O-Ring 50 psi None* P kpa Visual* P *Head is machined to accept optional electrical indicators. See Indicator list at right for the available choices. Media Part Seal Type Bx(c) = 1000 (in.) (mm) No. Material Synteq 6µm P BunaN P BunaN Synteq 9µm P BunaN P BunaN Synteq 10µm P BunaN Synteq 14µm P BunaN Synteq 20µm P BunaN P BunaN Synteq 23µm P BunaN P BunaN Cellulose 23µm P BunaN P BunaN 1 This filter not recommended for use with the No Bypass head assembly P Synteq is Donaldson s synthetic filter media that was specially developed for liquid filtration. Its lowfriction, high-flow properties result in consistently low differential pressure over the life of the filter. Donaldson designed this consistently-shaped fiber pattern to control fiber size, pore size, and flow patterns throughout the media mat. The result is a media with predictable filtration efficiencies, maximum dirt holding capacity, and low pressure drop. Synteq filter media is compatible with petroleum based fluids, most phosphate esters, water oil emulsions, and HWCF (high water content fluids). Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 43

46 Filter Performance Alternatives Hydraulic - Original Duramax HMK04 HMK04 Series Specifications Product Flow Range Pressure (NFPA/t ) Porting Types Family Working Static HMK gpm 500 psi 1000 psi SAE-12, -16 O-Ring l/min 3448 kpa 6895 kpa or 1 NPT, ¾ NP 34.5 bar 69 bar Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Where and Why Use Donaldson s famous Duramax filters are the highest rated medium pressure filters available in a spin-on configuration. Duramax are reliable, sturdy, long-lived and easy to install. Most often used as return-line filters, they are designed for working pressures up to 1000 psi and static pressures up to 2000 psi. Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters Notes Donaldson uses the inlet port as the reference point. Left side, for instance, means that the indicator mounts on the side of the filter head that is on your left when you face the inlet port. The filter head snout/post must be lubricated before spinning on a new filter to prevent thread damage. Mix n Match... Select the head and filter combination to build a filter system to suit your specifications Head Assemblies Port Bypass Standard Indicator Indicator Head Size Rating Style & Location 1,2 Options Part No. ¾ NPT 25 psi / 172 kpa None None P D (Visual), Left Side None P SAE-12 O-Ring 25 psi / 172 kpa None None P D (Visual), Left Side None P No Bypass D (Visual), Left Side (25 psi) None P None None P No Bypass D (Visual), Left Side (50 psi) None P SAE-12 O-Ring 50 psi / 345 kpa A (Electrical) B,C P (3 ports) 1 NPT 25 psi / 172 kpa D (Visual), both sides A, B, C P None None P D (Visual), Left Side None P SAE-16 O-Ring 15 psi / 100 kpa None A P SAE-16 O-Ring 25 psi / 172 kpa None None P D (Visual), Left Side None P D (Visual), both sides A, B, C P E (Electrical) None P A (Electrical) B, C P No Bypass D (Visual), Both Sides (25 psi) A, B, C P A (Electrical) B, C P psi D (Visual, Right Side) All P No Bypass None None P psi / 345 kpa None None P A (Electrical) B, C P SAE-16 O-Ring 5 psi D (Visual), Both Sides All P NPT No Bypass D (Visual), Left Side (25 psid) None P NPT 25 psi D (Visual), Left Side (25 psid) None P

47 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Spin-on Filter Choices Media Part Bx(c) = 1000 Technology (in.) (mm) Number <3µm Synteq P with Viton Seal 6µm Synteq P µm Synteq P P µm Synteq P P µm Cellulose P P µm Synteq P psi collapse P µm Synteq P P µm Synteq P with Viton Seal 33µm Synteq P P µm Cellulose P P µm Cellulose P P µm Synteq P with Viton Seal >50µm Synteq P P na Water Removal P Service Indicator Choices for HMK Series Use with Bypass Indicator Valve Pressure of: Part No. Style 3 Description 5 psi / 34.5 kpa P A Single post DC. 15 psi / 103 kpa P A Single post DC. 25 psi / kpa P A Single post DC. 25 psi / kpa P A Single post DC. 25 psi / kpa P B DC 2-wire. 25 psi / kpa P C AC/DC 3-wire. 50 psi / 345 kpa P A Single post DC. 50 psi / 345 kpa P A Single post DC. 50 psi / 345 kpa P B DC 2-wire. 50 psi / 345 kpa P E DC 2-wire. 50 psi / 345 kpa P F DC 3-wire. 50 psi / 345 kpa P C AC/DC 3-wire. A B C, F E Synteq is Donaldson s synthetic filter media that was specially developed for liquid filtration. Its low-friction, highflow properties result in consistently low differential pressure over the life of the filter. Donaldson designed this consistentlyshaped fiber pattern to control fiber size, pore size, and flow patterns throughout the media mat. The result is a media with predictable filtration efficiencies, maximum dirt holding capacity, and low pressure drop. Synteq filter media is compatible with petroleum based fluids, most phosphate esters, water oil emulsions, and HWCF (high water content fluids). Filter Seals Filters with seals made of BunaN are appropriate for most applications involving petroleum oil. Filters with seals made of Viton (a fluoroelastomer) are required when using diester, phosphate ester fluids, water glycol, water/oil emulsions and HWCF (high water content fluids) over 150 F. Donaldson offers both types. Plug Electric Models 1 Visual Models (non-electric) 2 D Use with Bypass Indicator Valve Pressure of: Part No. Style 3 15 psi / 103 kpa P D 25 psi / 172. kpa P D 50 psi / 345 kpa P D n/a (blank plate) P n/a NOTE: PSI is marked on the face of the visual indicators. Plug P is removed only for installation of electric indicator Indicator Notes 1 All electric models have a maximum operating temperature of 250 F/ 121 C. 2 All non-electric models have a maximum operating temperature of 180 F/ 82 C. 3 Indicator styles are illustrated above. Filter Performance Alternatives Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters 45

48 Liquid Filtration Heads & Filters Jefes de fi ltración de líquidos y fi ltros Filtration des liquides et des fi ltres chefs Liquid Filtration Köpfe und Filter Capi di fi ltraggio di liquidi e fi ltri Filter Performance Alternatives Hydraulic - Original Duramax HMK05 HMK05 Series Specifications Product Flow Range Pressure (NFPA/t ) Porting Types Family Working Static HMK gpm 350 psi 800 psi SAE-20 O-Ring or 189 l/min 2413 kpa 5516 kpa 1¼ NPT 24 bar 55 bar Where and Why Use Donaldson s famous Duramax filters are the highest rated medium pressure filters available in a spin-on configuration. Duramax are reliable, sturdy, long-lived and easy to install. Most often used as returnline filters, they are designed for working pressures up to 1000 psi and static pressures up to 2000 psi. Shoptalk Filter Maintenance Kits Liquid Filtration Heads & Filters Notes Donaldson uses the inlet port as the reference point. Left side, for instance, means that the indicator mounts on the side of the filter head that is on your left when you face the inlet port. The filter head snout/post must be lubricated before spinning on a new filter to prevent thread damage. 46 Mix n Match... Select the head and filter combination to build a filter system to suit your specifications Head Assemblies Port Bypass Standard Indicator Indicator Part Size Rating Style & Location 1 Options 2 No. 1¼ NPT 25 psi / 182 kpa D (Visual), Both Sides (25 psi) A, B, C, E, F P A (Electrical) (25 psi) A, B, C, E, F P ¼ NPT 25 psi D (Visual), Left Side (25 psi) D P SAE psi D (Visual), Both Sides (25 psi) A, B, C, E, F P O-Ring 50 psi D (Visual), Left Side A, B, C, E, F P Blank Plate Right Side, Elect Port Plugged 172 kpa None None P No Bypass D (Visual), Both Sides (25 psi) A, B, C, E, F P No Bypass D (Visual), Right Side (25 psi) D P No Bypass D (Visual), Both Sides (50 psi) A, B, C, E, F P Spin-On Filters for HMK05 Media Bx(c) = 1000 Part Type (in./mm) No. Synteq <3µm 14.2/361 P Synteq 6µm 11.6/294 P /294 P Viton Synteq 9µm 11.6/294 P /294 P Viton 14.2/361 P Synteq 10µm 11.6/294 P Synteq 14µm 14.2/361 P Synteq 20µm 11.6/294 P /294 P Viton Synteq 23µm 11.6/294 P /294 P Viton 14.2/361 P Cellulose 23µm 11.6/294 P Synteq >50µm 11.6/294 P /361 P See previous page for indicator options. Filter Seals Filters with seals made of BunaN are appropriate for most applications involving petroleum oil. Filters with seals made of Viton (a fluoroelastomer) are required when using diester, phosphate ester fluids, water glycol, water/ oil emulsions and HWCF (high water content fluids) over 150 F. Donaldson offers both types.

49 Product Guide by Part Number Especificaciones des los productos por númerou de pieza Caractéristiques techniques par numéro de pièce Productangaben nach Teilenummern Specificazioni prodotto per disegno Use this alpha-numerically sorted section with small pictures to confirm or verify a Donaldson filter is the proper replacement filter for your equipment. Donaldson part numbers are not the easiest to use or remember. The table below may help you become more familiar with our part numbering system. Asterisk (*) denotes parts featured in this section. Check your local Donaldson distributor for availability and pricing. Donaldson Engine Aftermarket Part Numbers Part numbers beginning with... Números de parte que comienzan con: Numéros De Pièces Débutant Avec: English Español Français A-D* Air Cleaners / Housing Filtros de Aire/Carcazas Boîtiers des Filtres à Air E* Donaldson Endurance Filters, Donaldson Endurance, Donaldson Endurance, Air Cleaners / Housing Filtros de Aire/Carcazas Boîtiers des Filtres à Air G Air Cleaners / Housing Filtros de Aire/Carcazas Boîtiers des Filtres à Air H Intake / Exhaust Accessories Accesorios de Silenciadores Accessoires de Silencieux J Exhaust Accessories Accesorios de Escape Accessoires d Échappements K Hydraulic Assemblies Sistemas Hidráulicos Systèmes Hydrauliques M Mufflers, Silencers, Silent Partner Silenciadores, Silent Partner Silencieux, Silent Partner P* (P00-P18, P27, P50-P56, P60-P61, P76-P92) (P00-P18, P27, P50-P56, P60, P76-P92) (P00-P18, P27, P52-P56, P60, P76-P92) Replacement parts, including filters, Repuestos que incluyen filtros, piezas de Pièces de rechange, incluant filtres, pièces service parts, air/oil separators, servicio, separadores de aire/aceite, de service, séparateurs d air/d huile (P20-P22, P27) Exhaust Accessories (P20-P22, P27) Accesorios de Escape R* Filters Filtros Filtres S* Breathers/Crankcase Filtration Respiradero/Filtración Carter Reniflards/Filtre Carter X* Kits (Filter maintenance kits are P559xxx) Kits (Agrupados de filtros son P559xxx) Accessoires d Admission, Trousses de Filtre (les trousses d entretien pour filtres sont P559xxx) If Staying Current is Important to You, Consider Using Our On-line Tools On-line Product Details / Specifications Type in a Donaldson part number in the search window on our public web site. Your results screen will return choices from various countries and results from ecatalogs or literature. The image on the left is an example of details available on ecatalogs for a Donaldson Duramax spin-on filter. On-line Attribute Search The attribute search on our public web site gives you the ability to search for up to four attributes for more flexible and customized search. Product Guide by Part Number Products by Type & Dimension Filter Maintenance Kits Liquid Filtration Heads & Filters 47

50 B085001, DURALITE AIR CLEANER, DURALITE ECB 08" : 8.50" (216 mm) ID: 3.00" (76 mm) : 11.00" (279 mm) Outlet : 1.38" (35 mm) B085008, DURALITE AIR CLEANER, DURALITE ECB 08" : 8.75" (222 mm) ID: 3.00" (76 mm) : 8.50" (216 mm) Outlet : 1.38" (35 mm) B085011, DURALITE CUMMINS , HERCULES B & : 8.50" (216 mm) ID: 4.00" (102 mm) : 11.00" (279 mm) Outlet : 1.38" (35 mm) B085046, DURALITE MARINE OR OTHER HIGH MOISTURE ENVIRONMENTS : 8.50" (216 mm) ID: 4.00" (102 mm) : 11.00" (279 mm) Outlet : 1.38" (35 mm) B085048, DURALITE MARINE OR OTHER HIGH MOISTURE ENVIRONMENTS : 8.50" (216 mm) ID: 3.00" (76 mm) : 11.00" (279 mm) Outlet : 1.38" (35 mm) B085056, DURALITE MAN : 7.71" (196 mm) ID: 5.98" (152 mm) : 10.23" (260 mm) B105002, DURALITE GENERAC, SAN MOTORS : 10.50" (267 mm) ID: 5.00" (127 mm) : 15.00" (381 mm) Outlet : 1.38" (35 mm) B105006, DURALITE CUMMINS , ISUZU X , LEROI : 10.50" (267 mm) ID: 4.00" (102 mm) : 10.50" (267 mm) Outlet : 1.38" (35 mm) B105020, DURALITE MARINE OR OTHER HIGH MOISTURE ENVIRONMENTS : 10.50" (267 mm) ID: 4.00" (102 mm) : 10.50" (267 mm) Outlet : 1.38" (35 mm) B120376, DURALITE DETROIT DIESEL : 12.50" (318 mm) ID: 8.00" (203 mm) : 15.75" (400 mm) Outlet : 1.89" (48 mm) B120439, DURALITE MTU ENGINES : 12.48" (317 mm) ID: 7.78" (198 mm) : 15.75" (400 mm) B120473, DURALITE : 12.48" (317 mm) ID: 7.78" (198 mm) : 17.52" (445 mm) B125003, DURALITE DEUTZ ALLIS , DIVERSIFIED : 12.50" (318 mm) ID: 5.00" (127 mm) : 15.00" (381 mm) Outlet : 1.38" (35 mm) B125005, DURALITE LEROI : 12.50" (318 mm) ID: 5.50" (140 mm) : 9.00" (229 mm) Outlet : 1.38" (35 mm) B125011, DURALITE, DURALITE : 12.50" (318 mm) ID: 5.00" (127 mm) : 8.97" (228 mm) C045001, DURALITE DEUTZ ALLIS & , FMC : 4.50" (114 mm) ID: 1.50" (38 mm) : 4.50" (114 mm) Outlet : 1.38" (35 mm) C045002, DURALITE AIR CLEANER, DURALITE ECC 04" : 4.50" (114 mm) ID: 1.50" (38 mm) : 8.00" (203 mm) Outlet : 1.38" (35 mm) Page 48

51 C055002, DURALITE GEHL CO & 79388, GENERAC CORP : 5.50" (140 mm) ID: 1.75" (44 mm) : 7.00" (178 mm) Outlet : 1.38" (35 mm) C055003, DURALITE DEUTZ ALLIS , MURPHY DIESEL MD43843 : 5.50" (140 mm) ID: 1.75" (44 mm) : 4.00" (102 mm) Outlet : 1.38" (35 mm) C085003, DURALITE LISTER DIESEL , TIPPECANOE : 8.50" (216 mm) ID: 3.00" (76 mm) : 5.00" (127 mm) Outlet : 1.38" (35 mm) C085004, DURALITE CUMMINS , LEROI : 8.50" (216 mm) ID: 3.00" (76 mm) : 9.50" (241 mm) Outlet : 1.38" (35 mm) C065001, DURALITE E-Z GO CART 21959G1, JACOBSEN : 6.50" (165 mm) ID: 2.00" (51 mm) : 4.00" (102 mm) Outlet : 1.38" (35 mm) C085005, DURALITE LEROI : 8.50" (216 mm) ID: 2.43" (62 mm) : 5.00" (127 mm) Outlet : 1.38" (35 mm) C065002, DURALITE FIAT-ALLIS : 6.50" (165 mm) ID: 1.93" (49 mm) : 7.50" (190 mm) Outlet : 1.38" (35 mm) C085006, DURALITE ISUZU X : 8.50" (216 mm) ID: 2.43" (62 mm) : 9.50" (241 mm) Outlet : 1.38" (35 mm) C065003, DURALITE YANMAR : 6.50" (165 mm) ID: 2.25" (57 mm) : 5.00" (127 mm) Outlet : 1.38" (35 mm) C085041, DURALITE SAME AS C WITH INNER LINER ADDED : 8.50" (216 mm) ID: 3.00" (76 mm) : 9.50" (241 mm) Outlet : 1.38" (35 mm) C065015, DURALITE CARRIER TRANSICOLD /16781 : 6.50" (165 mm) ID: 2.00" (51 mm) : 9.00" (229 mm) Outlet : 1.38" (35 mm) C085043, DURALITE SAME AS C WITH INNER LINER ADDED : 8.50" (216 mm) ID: 2.50" (64 mm) : 9.50" (241 mm) Outlet : 1.38" (35 mm) C085001, DURALITE BRERSON : 8.50" (216 mm) ID: 2.50" (64 mm) : 4.00" (102 mm) Outlet : 1.38" (35 mm) C085002, DURALITE FIAT ALLIS , GENERAC CORP : 8.50" (216 mm) ID: 2.43" (62 mm) : 6.50" (165 mm) Outlet : 1.38" (35 mm) C085061, DURALITE MTU : 8.50" (216 mm) ID: 3.00" (76 mm) : 11.51" (292 mm) C105003, DURALITE LEROI : 10.50" (267 mm) ID: 3.93" (100 mm) : 6.00" (152 mm) Outlet : 1.38" (35 mm) C105004, DURALITE GRIMMER-SCHMIDT, CUMMINS : 10.50" (267 mm) ID: 4.00" (102 mm) : 10.50" (267 mm) Outlet : 1.38" (35 mm) Page 49

52 C105017, DURALITE SAME AS C WITH INNER LINER ADDED : 10.50" (267 mm) ID: 4.00" (102 mm) : 10.50" (267 mm) Outlet : 1.38" (35 mm) C105028, DURALITE JOHN DEERE RE63779A : 10.50" (267 mm) ID: 4.00" (102 mm) : 6.00" (152 mm) Outlet : 1.38" (35 mm) C125004, DURALITE FIAT ALLIS , PERKINS : 12.50" (318 mm) ID: 5.00" (127 mm) : 11.00" (279 mm) Outlet : 1.38" (35 mm) C125017, DURALITE JOHN DEERE RE64564 : 12.50" (318 mm) ID: 5.00" (127 mm) : 11.00" (279 mm) Outlet : 1.38" (35 mm) C125020, DURALITE MTU : 12.50" (318 mm) ID: 5.00" (127 mm) : 8.01" (204 mm) D045003, DURALITE INGERSOLL RAND : 4.50" (114 mm) ID: 1.50" (38 mm) : 4.50" (114 mm) Outlet : 1.38" (35 mm) D045004, DURALITE JOHN DEERE AM : 4.50" (114 mm) ID: 1.50" (38 mm) : 6.00" (152 mm) Outlet : 1.38" (35 mm) D055004, DURALITE GEHL CO 77628, JOHN DEERE AM : 5.50" (140 mm) ID: 1.75" (44 mm) : 7.00" (178 mm) Outlet : 1.38" (35 mm) D065003, DURALITE FREIGHTLINER, TELEDYNE : 6.50" (165 mm) ID: 2.00" (51 mm) : 4.00" (102 mm) Outlet : 1.38" (35 mm) D065008, DURALITE FREIGHTLINER, THERMOKING : 6.50" (165 mm) ID: 2.00" (51 mm) : 9.00" (229 mm) Outlet : 1.38" (35 mm) E500667, FINNED KOMATSU : 4.09" (104 mm) ID: 2.47" (63 mm) : 5.71" (145 mm) Gasket ID: 3.09" (79 mm) EAF5000, ULTRA-WEB DONALDSON FWA14, FWG14 A/C : 11.09" (282 mm) ID: 6.72" (171 mm) : 12.00" (305 mm) Gasket : 0.53" (13 mm) EAF5001, ULTRA-WEB DONALDSON FWA16, FWG16 A/C : 12.09" (307 mm) ID: 7.72" (196 mm) : 14.00" (356 mm) Gasket : 0.53" (13 mm) EAF5002, ULTRA-WEB DONALDSON FHG16 A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Gasket : 0.66" (17 mm) EAF5007, ULTRA-WEB DONALDSON EBA13 A/C : 10.40" (264 mm) ID: 6.04" (153 mm) : 21.82" (554 mm) EAF5008, ULTRA-WEB DONALDSON EBA15 A/C : 12.74" (324 mm) ID: 8.38" (213 mm) : 22.00" (559 mm) EAF5014, ULTRA-WEB DONALDSON EBA13 A/C : 10.40" (264 mm) ID: 6.04" (153 mm) : 15.00" (381 mm) EAF5015, ULTRA-WEB DONALDSON EBB14 OR EBG14 : 12.09" (307 mm) ID: 7.72" (196 mm) : 18.00" (457 mm) Page 50

53 EAF5016, ULTRA-WEB DONALDSON EBA13 : 10.40" (264 mm) ID: 6.04" (153 mm) : 26.00" (660 mm) EAF5024, ULTRA-WEB DONALDSON EBA11 Konepac : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) EAF5025, ULTRA-WEB DONALDSON EBA09 KONEPAC : 8.66" (220 mm) ID: 5.21" (132 mm) : 28.00" (711 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) EAF5026, ULTRA-WEB DONALDSON EBA13 KONEPAC : 12.75" (324 mm) ID: 8.32" (211 mm) : 28.00" (711 mm) Gasket : 9.81" (249 mm) Gasket ID: 5.38" (137 mm) EAF5027, ULTRA-WEB DONALDSON EBA13 KONEPAC : 12.75" (324 mm) ID: 8.32" (211 mm) : 23.99" (609 mm) Gasket : 9.81" (249 mm) Gasket ID: 5.38" (137 mm) EAF5028, ULTRA-WEB DONALDSON EBB12 OR EBG12 A/C : 10.40" (264 mm) ID: 6.04" (153 mm) : 16.00" (406 mm) EAF5029, ULTRA-WEB KONEPAC DONALDSON ECG11 KONEPAC A/C : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) EAF5034, ULTRA-WEB DONALDSON FHG12 A/C : 9.21" (234 mm) ID: 4.85" (123 mm) : 13.00" (330 mm) EAF5035, ULTRA-WEB DONALDSON FWA12, FWG12 A/C : 9.22" (234 mm) ID: 4.84" (123 mm) : 10.00" (254 mm) Gasket : 0.53" (13 mm) EAF5038, ULTRA-WEB DONALDSON SRG20, SRG29 A/C : 17.62" (448 mm) ID: 11.07" (281 mm) : 23.06" (586 mm) Gasket : 0.90" (23 mm) EAF5039, ULTRA-WEB DONALDSON STG16 A/C : 13.83" (351 mm) ID: 9.49" (241 mm) : 17.88" (454 mm) Gasket : 0.90" (23 mm) EAF5040, ULTRA-WEB DONALDSON SRG20, SRG29 A/C : 17.58" (447 mm) ID: 12.22" (310 mm) : 23.03" (585 mm) Gasket : 0.90" (23 mm) EAF5041, ULTRA-WEB DONALDSON STG14 A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) Gasket : 0.90" (23 mm) EAF5042, ULTRA-WEB DONALDSON STG16 A/C : 14.68" (373 mm) ID: 10.34" (263 mm) : 23.88" (607 mm) Gasket : 0.90" (23 mm) EAF5043, ULTRA-WEB DONALDSON FVG14 A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 19.88" (505 mm) Gasket : 0.90" (23 mm) EAF5044, ULTRA-WEB DONALDSON STG12 A/C : 10.40" (264 mm) ID: 6.04" (153 mm) : 13.76" (350 mm) Gasket : 0.90" (23 mm) EAF5046, ULTRA-WEB DONALDSON FHG14 A/C : 11.09" (282 mm) ID: 6.73" (171 mm) : 16.00" (406 mm) Gasket : 0.66" (17 mm) EAF5047, ULTRA-WEB KONEPAC DONALDSON ECG11 KONEPAC A/C : 10.62" (270 mm) ID: 6.69" (170 mm) : 28.20" (716 mm) Gasket : 9.21" (234 mm) Gasket ID: 5.22" (133 mm) Page 51

54 EAF5048, ULTRA-WEB FRAM CA2550 : 9.50" (241 mm) ID: 6.89" (175 mm) : 27.44" (697 mm) EAF5049, ULTRA-WEB DONALDSON FVG16 A/C : 12.74" (324 mm) ID: 8.38" (213 mm) : 24.28" (617 mm) Gasket : 0.94" (24 mm) EAF5053, ULTRA-WEB KONEPAC DONALDSON ECG11 A/C : 10.62" (270 mm) ID: 6.69" (170 mm) : 22.02" (559 mm) Gasket : 9.21" (234 mm) Gasket ID: 5.22" (133 mm) EAF5055, ULTRA-WEB KONEPAC DONALDSON ECG11 A/C : 10.62" (270 mm) ID: 6.69" (170 mm) : 20.02" (509 mm) Gasket : 9.18" (233 mm) Gasket ID: 5.22" (133 mm) EAF5056, ULTRA-WEB DONALDSON EBB14 A/C : 12.09" (307 mm) ID: 7.72" (196 mm) : 15.19" (386 mm) Gasket : 0.66" (17 mm) EAF5057, ULTRA-WEB DONALDSON FWD16 OR FVG16 A/C : 12.74" (324 mm) ID: 8.38" (213 mm) : 17.03" (433 mm) Gasket : 0.94" (24 mm) EAF5061, ULTRA-WEB DONALDSON EBA11 A/C : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) EAF5065, ULTRA-WEB MCI BUS 9G-3-37 : 15.09" (383 mm) ID: 8.70" (221 mm) : 15.34" (390 mm) Gasket : 0.75" (19 mm) EAF5066, ULTRA-WEB FREIGHTLINER : 9.33" (237 mm) ID: 5.15" (131 mm) : 14.49" (368 mm) EAF5067, ULTRA-WEB GM , FORD F3HZ9601A : 9.33" (237 mm) ID: 5.15" (131 mm) : 12.28" (312 mm) EAF5069, ULTRA-WEB DONALDSON EPG15 A/C : 13.09" (332 mm) ID: 6.78" (172 mm) : 14.76" (375 mm) EAF5074, ULTRA-WEB MACK, RVI : 8.66" (220 mm) ID: 5.20" (132 mm) : 15.00" (381 mm) Gasket : 9.72" (247 mm) Gasket ID: 3.03" (77 mm) EAF5092, ULTRA-WEB : 12.09" (307 mm) ID: 7.73" (196 mm) Height: 19.00" (483 mm) Gasket : 0.90" (23 mm) EAF5095, ULTRA-WEB DONALDSON EBB16 A/C : 13.84" (352 mm) ID: 9.47" (241 mm) : 15.50" (394 mm) EAF5096, ULTRA-WEB DONALDSON EBB15 A/C : 12.09" (307 mm) ID: 7.72" (196 mm) : 15.00" (381 mm) EAF5097, ULTRA-WEB KONEPAC IHC C1 : 10.40" (264 mm) ID: 6.95" (177 mm) : 22.00" (559 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) EAF5098, ULTRA-WEB RADIALSEAL Volvo : 13.09" (332 mm) ID: 7.69" (195 mm) : 15.94" (405 mm) EAF5099, ULTRA-WEB DONALDSON EBB16 A/C : 13.84" (352 mm) ID: 7.47" (190 mm) : 18.06" (459 mm) Page 52

55 EAF5100, ULTRA-WEB DONALDSON ERA13 A/C, FREIGHTLINER, PETERBILT : 11.09" (282 mm) ID: 6.78" (172 mm) : 23.44" (595 mm) Gasket : 11.40" (290 mm) EAF5101, ULTRA-WEB DONALDSON ERA15 AIR CLNR, KENWORTH, PETERBILT : 12.74" (324 mm) ID: 7.44" (189 mm) : 25.44" (646 mm) Gasket : 13.06" (332 mm) EAF5102, ULTRA-WEB VORTOX : 12.74" (324 mm) ID: 8.38" (213 mm) : 26.00" (660 mm) Gasket : 0.53" (13 mm) EAF5104, ULTRA-WEB DONALDSON EPG15 AIR CLEANER, NAVISTAR : 13.06" (332 mm) ID: 6.78" (172 mm) : 18.15" (461 mm) EAF5105, ULTRA-WEB DONALDSON EPG11 AIR CLEANER, FREIGHTLINER FLN : 9.33" (237 mm) ID: 5.15" (131 mm) : 18.50" (470 mm) EAF5106, ULTRA-WEB RADIALSEAL FREIGHTLINER COE : 9.33" (237 mm) ID: 5.80" (147 mm) : 23.03" (585 mm) EAF5107, ULTRA-WEB RADIALSEAL KW T2000 FROM 11/98 : 11.10" (282 mm) ID: 6.77" (172 mm) : 15.15" (385 mm) EAF5108, ULTRA-WEB RADIALSEAL MACK 57MD46M : 9.33" (237 mm) ID: 5.80" (147 mm) : 25.04" (636 mm) EAF5109, ULTRA-WEB RADIALSEAL KWT2000 THRU 10/98 : 11.48" (292 mm) ID: 5.80" (147 mm) : 15.15" (385 mm) EAF5110, ULTRA-WEB : 8.62" (219 mm) ID: 4.29" (109 mm) : 5.67" (144 mm) EAF5114, ULTRA-WEB RADIALSEAL MACK 57MD320M : 9.33" (237 mm) ID: 5.80" (147 mm) : 25.04" (636 mm) EAF5116, ULTRA-WEB DONALDSON ENDURANCE : 12.31" (313 mm) ID: 6.99" (178 mm) : 20.08" (510 mm) EAF5135, ULTRA-WEB RADIALSEAL : 13.47" (342 mm) ID: 8.20" (208 mm) : 17.24" (438 mm) EAF5141, ULTRA-WEB : 6.10" (155 mm) ID: 3.38" (86 mm) : 7.76" (197 mm) EAF5142, ULTRA-WEB : 13.80" (351 mm) ID: 9.50" (241 mm) : 14.19" (360 mm) EAF5147, ULTRA-WEB RADIALSEAL DONALDSON ERA11 AIR CLNR, FRTLNR CLASSIC : 9.33" (237 mm) ID: 5.16" (131 mm) : 24.61" (625 mm) EAF5148, ULTRA-WEB RADIALSEAL DONALDSON ERA11 RADIAL SEAL AIRCLEANER : 9.64" (245 mm) ID: 5.15" (131 mm) : 21.42" (544 mm) EAF5149, ULTRA-WEB RADIALSEAL DONALDSON ERA13 RADIAL SEAL AIRCLEANER : 11.10" (282 mm) ID: 5.82" (148 mm) : 21.19" (538 mm) EAF5150, ULTRA-WEB RADIALSEAL DONALDSON ERA15 RADIAL SEAL AIRCLEANER : 12.74" (324 mm) ID: 7.44" (189 mm) : 25.38" (645 mm) EAF5151, ULTRA-WEB RADIALSEAL PETERBILT, DONALDSON ERA15 : 12.74" (324 mm) ID: 7.44" (189 mm) : 21.38" (543 mm) EAF5152, ULTRA-WEB RADIALSEAL DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS : 17.76" (451 mm) ID: 11.46" (291 mm) : 24.06" (611 mm) Page 53

56 EAF5153, ULTRA-WEB RADIALSEAL DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS : 17.76" (451 mm) ID: 11.46" (291 mm) : 29.25" (743 mm) EAF5187, ULTRA-WEB FORD E3TZ9601C : 11.68" (297 mm) ID: 8.11" (206 mm) : 5.00" (127 mm) EAF5188, ULTRA-WEB IHC C1 : 11.68" (297 mm) ID: 8.11" (206 mm) : 7.00" (178 mm) EAF5189, ULTRA-WEB FORD : 13.84" (352 mm) ID: 6.69" (170 mm) : 10.00" (254 mm) EAF5194, ULTRA-WEB DONALDSON EBA11 A/C : 8.84" (225 mm) ID: 5.84" (148 mm) : 28.00" (711 mm) ECF4085 COOLANT SPIN-ON EXTENDED SERVICE 150K NON CHEMICAL COOLANT FILTER : 3.66" (93 mm) Thread Size: 11/16-16 : 5.33" (135 mm) Efficiency 99%: 14 Micron ECF4086 COOLANT SPIN-ON EXTENDED SERVICE 150K NON CHEMICAL COOLANT FILTER, VOLVO : 3.66" (93 mm) Thread Size: M16 x 1.5-6H : 5.35" (136 mm) Efficiency 99%: 14 Micron ECF4088 COOLANT SPIN-ON EXTENDED SERVICE 150K COOLANT : 3.67" (93 mm) Thread Size: 11/16-16 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Efficiency 99%: 14 Micron ECF4089 COOLANT SPIN-ON EXTENDED SERVICE 150K COOLANT, VOLVO : 3.66" (93 mm) Thread Size: M16 x 1.5-6H : 5.35" (136 mm) Efficiency 99%: 14 Micron EFF0047 FUEL SPIN-ON SECONDARY DETROIT DIESEL ENGINES : 4.67" (119 mm) Thread Size: 1 1/16-16 : 8.94" (227 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 5 Micron EFF7917 FUEL SPIN-ON SECONDARY DETROIT DIESEL : 3.66" (93 mm) Thread Size: 13/16-12 : 6.85" (174 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.05" (77 mm) Efficiency 99%: 5 Micron EFF9092 FUEL SPIN-ON PRIMARY CAT ENGINES : 4.25" (108 mm) Thread Size: 1-14 : 10.31" (262 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 5 Micron ELF2500 LUBE SPIN-ON FULL FLOW EXTENDED SERVICE DETROIT DIESEL SERIES 60, 50 ENGINES : 4.65" (118 mm) Thread Size: 1 5/8-12 : 10.24" (260 mm) Gasket : 4.33" (110 mm) Gasket ID: 3.87" (98 mm) Efficiency 99%: 15 Micron ELF2501 LUBE SPIN-ON FULL FLOW EXTENDED SERVICE CUMMINS ISX, ISM ENGINES : 4.67" (119 mm) Thread Size: M95 x 2.5 : 11.70" (297 mm) Gasket : 4.64" (118 mm) Gasket ID: 3.97" (101 mm) Efficiency 99%: 15 Micron ELF2502 LUBE SPIN-ON FULL FLOW EXTENDED SERVICE CATERPILLAR ENGINES : 5.33" (135 mm) Thread Size: 1 1/2-16 : 12.13" (308 mm) Gasket : 4.33" (110 mm) Gasket ID: 3.93" (100 mm) Efficiency 99%: 15 Micron ELF2504 LUBE SPIN-ON FULL FLOW DONALDSON ENDURANCE PLUS FOR MACK, VOLVO : 4.23" (107 mm) Thread Size: 1 1/8-16 : 10.31" (262 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.54" (90 mm) Efficiency 99%: 22 Micron ELF3998 LUBE SPIN-ON FULL FLOW DETROIT DIESEL SERIES 60 ENGINES : 4.65" (118 mm) Thread Size: 1 5/8-12 : 10.24" (260 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.84" (98 mm) Efficiency 99%: 15 Micron Page 54

57 ELF7300 LUBE SPIN-ON COMBINATION CUMMINS ENGINES : 4.65" (118 mm) Thread Size: 2 1/4-12 : 11.75" (298 mm) Relief Valve Setting: 75 PSI (5.17 Bar) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 15 Micron ELF7345 LUBE SPIN-ON FULL FLOW CUMMINS 4B 3.9 SERIES LUBE : 3.66" (93 mm) Thread Size: 1-16 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 15 Micron ELF7349 LUBE SPIN-ON FULL FLOW CUMMINS 4B & 6B SERIES LUBE : 3.66" (93 mm) Thread Size: 1-16 : 6.85" (174 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 15 Micron ELF7367 LUBE SPIN-ON FULL FLOW NAVISTAR C1 : 5.33" (135 mm) Thread Size: M36 x 1.5 Efficiency 99%: 15 Micron : 12.13" (308 mm) Gasket : 4.29" (109 mm) Gasket ID: 3.89" (99 mm) ELF7405 LUBE SPIN-ON FULL FLOW CAT ENGINES : 4.65" (118 mm) Thread Size: 1 1/2-16 : 11.73" (298 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 15 Micron ELF7483 LUBE SPIN-ON FULL FLOW MACK/VOLVO ENGINES : 4.25" (108 mm) Thread Size: 1 1/8-16 : 10.31" (262 mm) Gasket : 3.88" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 15 Micron ELF7670 LUBE SPIN-ON FULL FLOW CUMMINS AND DETROIT DIESEL ENGINES : 4.65" (118 mm) Thread Size: 1 1/2-12 : 10.24" (260 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.84" (98 mm) Efficiency 99%: 15 Micron ELF7739 LUBE SPIN-ON FULL FLOW CAT ENGINES : 4.25" (108 mm) Thread Size: 1 1/8-16 : 10.31" (262 mm) Gasket : 3.88" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 15 Micron ELF7900 LUBE SPIN-ON FULL FLOW CUMMINS SIGNATURE & ISM ENGINES : 4.65" (118 mm) Thread Size: M95 x 2.5 : 11.70" (297 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 15 Micron ELF7947 LUBE SPIN-ON FULL FLOW DETROIT DIESEL ENGINES : 4.65" (118 mm) Thread Size: 1 1/2-12 : 6.22" (158 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.84" (98 mm) Efficiency 99%: 15 Micron EOA7376 OIL ANALYSIS KIT SPECTROCHEMICAL OIL ANALYSIS PLUS LEM &TAN/TBN P IHC, PACCAR : 6.84" (174 mm) ID: 4.24" (108 mm) : 8.00" (203 mm) P FWD OSHKOSH : 9.21" (234 mm) ID: 6.60" (168 mm) : 10.00" (254 mm) P FWD OSHKOSH : 10.40" (264 mm) ID: 7.79" (198 mm) : 12.00" (305 mm) P GASKET KIT GASKET KIT FOR COVER OF ST 14" A/C P BOWL GASKET BY/CUP FW, FH, FR, SB, ST 14" A/C P O-RING DONALDSON FG, FW, FH, FR, SB, ST 16" A/C P COVER GASKET COVER GASKET SB, ST 12" A/C P COVER GASKET COVER GASKET SB, ST 16" A/C Page 55

58 P GASKET SBG16 AIR CLEANER P IHC, MACK, TEREX, WABCO : 8.40" (213 mm) ID: 5.78" (147 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.53" (13 mm) P O-RING GASKET BY/CUP FW, FH, FR, SB, ST 12" A/C P GASKET DONALDSON SBG14 AIR CLEANER P COVER GASKET COVER GASKET SB 10" RS/TUBE A/C P GASKET DONALDSON SBG10 AIR CLEANER P GASKET BY OR CUP GASKET BY OR CUP, SB 08" RS/TUBE A/C P GASKET WASHER GASKET WASHER, FW & SB 10-16" A/C P AIR OIL SEPARATOR INGERSOLL RAND : 14.88" (378 mm) ID: 12.12" (308 mm) : 32.00" (813 mm) Flange Diameter: 18.56" (471 mm) P AIR PANEL AIRMAZE Width: 12.00" (305 mm) Depth: 2.19" (56 mm) Height: 6.00" (152 mm) P AIR MAZE CD , IHC : 12.56" (319 mm) ID: 7.51" (191 mm) : 26.88" (683 mm) Bolt Hole Diameter: 0.72" (18 mm) P AIR SAFETY AIR MAZE CD , IHC : 7.38" (187 mm) ID: 6.12" (155 mm) : 25.38" (645 mm) P COVER GASKET COVER GASKET, SB 08" RS/TUBE A/C P INNER COVER GASKET INNER COVER GASKET, SB 16" RS/TUBE A/C P INNER COVER GASKET INNER COVER GASKET, SB 14" RS/TUBE A/C P INNER COVER GASKET INNER COVER GASKET, SB 12" RS/TUBE A/C P101038, FINNED GMC MURPHY DIESEL : 7.93" (201 mm) ID: 3.57" (91 mm) : 12.00" (305 mm) Gasket ID: 4.12" (105 mm) Minor : 0.53" (13 mm) P GASKET BY OR CUP GASKET BY/CUP, FW, FH, FR, SB 10" A/C P GASKET WASHER GASKET WASHER, FW 5-8" A/C P AIR PANEL, ENGINE CAT 5L-6389 Width: 19.50" (495 mm) Depth: 2.19" (56 mm) Height: 19.50" (495 mm) P102745, FINNED FWG04, CLARK, TORO, ADVANCE MACHINE : 3.26" (83 mm) ID: 1.68" (43 mm) : 7.00" (178 mm) Gasket ID: 1.97" (50 mm) Minor : 0.42" (11 mm) P GASKET WASHER GASKET WASHER, FW 04" A/C P AIR PANEL, VENTILATION CAT, GMC, WHITE MOTOR Width: 24.00" (610 mm) Depth: 2.19" (56 mm) Height: 24.00" (610 mm) Page 56

59 P104445, FINNED FIAT ALLIS : 7.93" (201 mm) ID: 3.57" (91 mm) : 13.00" (330 mm) Gasket ID: 5.38" (137 mm) Minor : 0.53" (13 mm) P GASKET WASHER GASKET WASHER, SR, FV & ST A/C P AIR PANEL, VENTILATION CAT 6L-8485 Width: 15.00" (381 mm) Depth: 2.19" (56 mm) Height: 15.00" (381 mm) P AIR PANEL, VENTILATION BUCYRUS ERIE, UNIT RIG Width: 10.00" (254 mm) Depth: 2.19" (56 mm) Height: 10.00" (254 mm) P AIR PANEL, VENTILATION JOHN DEERE, IHC, CASE, ALLIS CHALMERS Width: 7.50" (190 mm) Depth: 2.19" (56 mm) Height: 28.00" (711 mm) P AIR PANEL, VENTILATION ALLIS CHALMERS, TEREX, LETOURNEAU Width: 11.00" (279 mm) Depth: 2.19" (56 mm) Height: 11.00" (279 mm) P AIR VEE-PAC GMC Width: 18.00" (457 mm) Depth: 10.84" (275 mm) : 30.94" (786 mm) Depth: 4.57" (116 mm) P AIR PANEL, VENTILATION GARDNER DENVER Width: 33.00" (838 mm) Depth: 2.19" (56 mm) Height: 4.00" (102 mm) P IHC, PETTIBONE : 11.09" (282 mm) ID: 6.73" (171 mm) : 18.00" (457 mm) P AIR PANEL, ENGINE CAT 6L-4714 Width: 24.00" (610 mm) Depth: 2.19" (56 mm) Height: 24.00" (610 mm) P AIR SAFETY WHITE FARM A, IHC : 3.35" (85 mm) ID: 2.27" (58 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION CAT, CRENLO, THERMOKING Width: 10.00" (254 mm) Depth: 2.19" (56 mm) Height: 17.00" (432 mm) P AIR PANEL, VENTILATION EXCEL, OWATONNA, STEIGER, IHC Width: 5.00" (127 mm) Depth: 2.19" (56 mm) Height: 38.00" (965 mm) P GASKET DONALDSON SRG Air Cleaner P IHC C1 : 7.02" (178 mm) ID: 4.39" (112 mm) : 19.76" (502 mm) P108736, FINNED MF M91 : 4.08" (104 mm) ID: 2.49" (63 mm) : 9.00" (229 mm) Gasket ID: 2.58" (66 mm) Minor : 0.66" (17 mm) P AIR PANEL, VENTILATION CAT, VERSATILE, WHITE FARM Width: 7.00" (178 mm) Depth: 2.19" (56 mm) Height: 23.50" (597 mm) P AIR PANEL, VENTILATION FEMCO CABS, GM , IR Width: 5.00" (127 mm) Depth: 2.19" (56 mm) Height: 24.00" (610 mm) Page 57

60 P AIR SAFETY JOHN DEERE, WHITE FARM : 4.57" (116 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) P FORD C8HZ9601C : 9.21" (234 mm) ID: 4.85" (123 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION TEREX, WHITE FARM Width: 7.50" (190 mm) Depth: 2.19" (56 mm) Height: 20.00" (508 mm) P CASE L35975 : 6.08" (154 mm) ID: 3.49" (89 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P CAT, WABCO : 3.12" (79 mm) ID: 1.50" (38 mm) : 3.25" (83 mm) Gasket ID: 1.62" (41 mm) P AIR PANEL, VENTILATION JOHN DEERE, FARMHAND Width: 15.00" (381 mm) Depth: 2.19" (56 mm) Height: 15.00" (381 mm) P DONALDSON FVG06 : 5.43" (138 mm) ID: 2.85" (73 mm) : 15.98" (406 mm) Gasket : 4.06" (103 mm) Gasket ID: 3.68" (93 mm) P AIR PANEL, VENTILATION WHITE FARM Width: 11.00" (279 mm) Depth: 2.19" (56 mm) Height: 23.50" (597 mm) P AIR SAFETY MF M91, IHC R5 : 3.41" (87 mm) ID: 2.93" (74 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P DONALDSON FVG05 AIR CLEANER : 4.51" (115 mm) ID: 2.54" (65 mm) : 15.16" (385 mm) Gasket : 3.52" (89 mm) Gasket ID: 3.15" (80 mm) P AIR SAFETY EUCLID, TEREX, WABCO, CLARK : 8.64" (219 mm) ID: 7.06" (179 mm) : 16.66" (423 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR PANEL, VENTILATION CRENLO Width: 5.25" (133 mm) Depth: 2.19" (56 mm) Height: 18.50" (470 mm) P AIR VEE-PAC UNIT RIG Width: 18.00" (457 mm) Depth: 10.84" (275 mm) : 35.44" (900 mm) Depth: 4.57" (116 mm) P AIR PANEL, VENTILATION UNIVERSAL SILENCER Width: 19.38" (492 mm) Depth: 2.19" (56 mm) Height: 24.38" (619 mm) P AIR SAFETY DONALDSON SRG20, WABCO, LETOURNEAU, UNIT RIG : 10.86" (276 mm) ID: 8.18" (208 mm) : 21.68" (551 mm) Bolt Hole Diameter: 0.90" (23 mm) P GASKET DONALDSON SRG AIR CLEANER P ATLAS COPCO, WORTHINGTON : 7.63" (194 mm) ID: 4.29" (109 mm) : 16.00" (406 mm) P GASKET DONALDSON SRG AIR CLEANER Page 58

61 P GASKET DONALDSON SRG AIR CLEANER P AIR PANEL, VENTILATION JOHN DEERE AH80920 Width: 6.12" (155 mm) Depth: 2.19" (56 mm) Height: 37.00" (940 mm) P JOHN DEERE A30508, IHC C1 : 10.40" (264 mm) ID: 6.04" (153 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.38" (162 mm) P AIR SAFETY BUCYRUS ERIE, IR, ONAN, SULLAIR : 8.24" (209 mm) ID: 7.12" (181 mm) : 22.00" (559 mm) Bolt Hole Diameter: 0.90" (23 mm) P COVER GASKET COVER GASKET, EB 15" A/C P AIR PANEL, VENTILATION CRENLO, WHITE FARM Width: 7.00" (178 mm) Depth: 2.19" (56 mm) Height: 47.00" (1194 mm) P AIR PANEL, VENTILATION CLARK, HESSTON, HUPP Width: 6.50" (165 mm) Depth: 2.19" (56 mm) Height: 33.00" (838 mm) P UNIT RIG 23486, WHITE MOTOR : 12.09" (307 mm) ID: 7.73" (196 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 8.12" (206 mm) P LINCOLN ELECTRIC M : 11.09" (282 mm) ID: 6.73" (171 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 9.56" (242 mm) P117624, FINNED CASE A43264 : 7.92" (201 mm) ID: 5.31" (135 mm) : 13.00" (330 mm) Gasket ID: 6.36" (162 mm) Minor : 0.66" (17 mm) P AIR SAFETY DONALDSON SRG, WABCO, LETOURNEAU, UNIT RIG : 11.87" (301 mm) ID: 10.25" (260 mm) : 22.02" (559 mm) Bolt Hole Diameter: 0.90" (23 mm) P GASKET GASKET, SR 20" A/C P COVER GASKET COVER GASKET, EB 13" A/C P EUCLID, TEREX : 13.84" (352 mm) ID: 11.23" (285 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.53" (13 mm) P AIR SAFETY IHC C1 : 6.39" (162 mm) ID: 5.29" (134 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.66" (17 mm) P PACCAR : 16.98" (431 mm) ID: 10.58" (269 mm) : 7.03" (179 mm) P CASE, CLARK, SULLAIR : 5.25" (133 mm) ID: 2.64" (67 mm) : 8.00" (203 mm) P118343, FINNED IHC : 9.21" (234 mm) ID: 4.85" (123 mm) : 10.00" (254 mm) Gasket ID: 6.38" (162 mm) Minor : 0.53" (13 mm) P AIR SAFETY CLARK, MASSEY FERGUSON : 2.46" (62 mm) ID: 1.91" (49 mm) : 8.26" (210 mm) P AIR PANEL, VENTILATION CAB VENT PANEL Width: 16.00" (406 mm) Depth: 2.19" (56 mm) Height: 24.00" (610 mm) Page 59

62 P119135, FINNED MASSEY FERGUSON, NEW HOLLAND : 5.23" (133 mm) ID: 3.65" (93 mm) : 15.00" (381 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P MASSEY FERGUSON M91 : 6.09" (155 mm) ID: 3.47" (88 mm) : 15.00" (381 mm) P GMC : 13.84" (352 mm) ID: 11.23" (285 mm) : 7.00" (178 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 11.57" (294 mm) P AIR SAFETY DONALDSON STG14 DONACLONE AIR CLEANER : 7.64" (194 mm) ID: 6.04" (153 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR SAFETY DONALDSON STG12 DONACLONE AIR CLEANER : 5.94" (151 mm) ID: 4.86" (123 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR SAFETY DONALDSON FHG16 CYCLOPAC : 7.28" (185 mm) ID: 6.20" (157 mm) : 17.70" (450 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY DONALDSON FHG14 CYCLOPAC : 6.39" (162 mm) ID: 5.29" (134 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY DONALDSON FHG12 CYCLOPAC : 4.58" (116 mm) ID: 3.48" (88 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY DONALDSON FHG10 CYCLOPAC : 4.58" (116 mm) ID: 3.48" (88 mm) : 15.65" (398 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY DONALDSON FHG08 CYCLOPAC : 3.37" (86 mm) ID: 2.90" (74 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P IHC, FREIGHTLINER, WABCO : 12.74" (324 mm) ID: 8.38" (213 mm) : 11.00" (279 mm) Gasket : 5.94" (151 mm) P JOHN DEERE AL19152 : 4.53" (115 mm) ID: 2.50" (64 mm) : 13.11" (333 mm) P AIR SAFETY DONALDSON FHG06 CYCLOPAC : 2.95" (75 mm) ID: 2.40" (61 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P IHC, MACK, PACCAR : 11.59" (294 mm) ID: 8.98" (228 mm) : 10.00" (254 mm) Gasket : 6.19" (157 mm) P CLARK, IHC, WABCO : 10.40" (264 mm) ID: 7.79" (198 mm) : 10.00" (254 mm) Gasket : 5.25" (133 mm) Gasket ID: 9.00" (228 mm) P WHITE MOTOR : 11.09" (282 mm) ID: 6.73" (171 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.62" (193 mm) P AIR SAFETY DONALDSON FHG09 CYCLOPAC : 4.09" (104 mm) ID: 3.65" (93 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY OLIVER : 3.36" (85 mm) ID: 2.93" (74 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) Page 60

63 P AIR SAFETY ADVANCE, CARRIER, CASE, NEW HOLLAND : 2.46" (62 mm) ID: 1.91" (49 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION EATON , CAT 8P5343 Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 23.50" (597 mm) P AIR SAFETY WHITE FARM : 4.16" (106 mm) ID: 3.65" (93 mm) : 14.55" (370 mm) Bolt Hole Diameter: 0.66" (17 mm) P MASSEY FERGUSON M91 : 7.93" (201 mm) ID: 5.32" (135 mm) : 13.00" (330 mm) P FORD, MACK WHITE MOTOR : 12.09" (307 mm) ID: 7.73" (196 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 10.12" (257 mm) P AIR PANEL, VENTILATION CLARK, FIAT ALLIS Width: 6.50" (165 mm) Depth: 2.19" (56 mm) Height: 23.50" (597 mm) P GASKET GASKET, KONEPAC 9" A/C P AIR SAFETY CLARK : 2.46" (62 mm) ID: 1.91" (49 mm) : 8.26" (210 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION IHC, CASE Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 38.00" (965 mm) P121240, FINNED KUBOTA : 3.26" (83 mm) ID: 1.68" (43 mm) : 7.00" (178 mm) Gasket : 3.00" (76 mm) Gasket ID: 2.50" (64 mm) Minor : 0.42" (11 mm) P AIR PANEL, VENTILATION PACCAR, DART Width: 15.00" (381 mm) Depth: 2.19" (56 mm) Height: 20.00" (508 mm) P AIR PANEL, VENTILATION MASSEY FERGUSON M1 Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 47.00" (1194 mm) P AIR SAFETY IHC, KOEHRING, KOMATSU : 7.64" (194 mm) ID: 6.04" (153 mm) : 17.00" (432 mm) Bolt Hole Diameter: 0.66" (17 mm) P122492, FINNED CASE, CLARK : 6.09" (155 mm) ID: 3.48" (88 mm) : 12.00" (305 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P122510, FINNED FLAME RETARDANT, UL APPROVED : 4.08" (104 mm) ID: 2.49" (63 mm) : 10.00" (254 mm) Gasket ID: 2.58" (66 mm) Minor : 0.66" (17 mm) P122514, FINNED FLAME RETARDANT. UL APPROVED : 5.25" (133 mm) ID: 2.64" (67 mm) : 11.00" (279 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P122529, FINNED FLAME RETARDANT UL APPROVED : 11.09" (282 mm) ID: 6.72" (171 mm) : 12.00" (305 mm) Gasket ID: 9.56" (243 mm) Minor : 0.53" (13 mm) P122605, FINNED WHITE : 12.09" (307 mm) ID: 5.73" (146 mm) : 12.00" (305 mm) Gasket : 8.88" (225 mm) Page 61

64 P AIR SAFETY JOY , RENAULT RVI : 6.39" (162 mm) ID: 5.29" (134 mm) : 15.00" (381 mm) P123065, FINNED DONALDSON FWG04 A/C, UL APPROVED : 3.27" (83 mm) ID: 1.67" (42 mm) : 7.00" (178 mm) Gasket : 3.00" (76 mm) Gasket ID: 2.50" (64 mm) Minor : 0.42" (11 mm) P123159, FINNED MASSEY FERGUSON M91 : 5.25" (133 mm) ID: 2.64" (67 mm) : 11.00" (279 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P AIR SAFETY CLARK, MASSEY FERGUSON, ALLIS CHALMERS : 2.59" (66 mm) ID: 2.15" (55 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION DEUTZ Width: 12.00" (305 mm) Depth: 2.19" (56 mm) Height: 16.00" (406 mm) P AIR SAFETY JOHN DEERE AR61988, CASE A44286 : 6.84" (174 mm) ID: 4.24" (108 mm) : 5.82" (148 mm) Bolt Hole Diameter: 0.66" (17 mm) P DDA GEN SETS 3-71, 4-71, 6-71 : 9.21" (234 mm) ID: 4.85" (123 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.12" (231 mm) P AIR SAFETY DDA GEN SETS 3-71, 4-71, 6-71 : 4.60" (117 mm) ID: 3.48" (88 mm) : 12.32" (313 mm) Gasket : 4.37" (111 mm) Gasket ID: 4.00" (102 mm) P ROOF DRILL DUST COLLECTOR : 6.84" (174 mm) ID: 3.48" (88 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.76" (121 mm) P AIR SAFETY FORD, CASE IR : 5.70" (145 mm) ID: 4.58" (116 mm) : 17.00" (432 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY DONALDSON FTG13 A/C, CLARK : 6.39" (162 mm) ID: 5.29" (134 mm) : 19.00" (483 mm) Bolt Hole Diameter: 0.66" (17 mm) P COVER GASKET COVER GASKET, EB 11" A/C P AIR SAFETY IR : 8.64" (219 mm) ID: 7.06" (179 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.90" (23 mm) P DONALDSON ECG10 AIR CLEANER : 8.04" (204 mm) ID: 6.06" (154 mm) : 11.00" (279 mm) Gasket ID: 5.38" (137 mm) P AIR PANEL, VENTILATION EATON BERGSTROM Width: 8.00" (203 mm) Depth: 2.19" (56 mm) Height: 17.00" (432 mm) P IR : 13.83" (351 mm) ID: 9.49" (241 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 9.88" (251 mm) P AIR SAFETY CASE A44805 : 6.84" (174 mm) ID: 4.24" (108 mm) : 8.00" (203 mm) Bolt Hole Diameter: 0.66" (17 mm) P COVER GASKET COVER GASKET, EB 16" A/C P AIR SAFETY DYNAPAC, IR, DRESSER : 3.41" (87 mm) ID: 2.90" (74 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) Page 62

65 P AIR SAFETY JOHN DEERE AT31227, OLIVER, IHC : 4.58" (116 mm) ID: 3.48" (88 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY TEREX : 7.64" (194 mm) ID: 6.04" (153 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR SAFETY DONALDSON FVG14 CYCLOFLOW AIR CLEANER : 7.64" (194 mm) ID: 6.04" (153 mm) : 21.00" (533 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR SAFETY DONALDSON FVG16 CYCLOFLOW AIR CLEANER : 8.64" (219 mm) ID: 7.06" (179 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) P DONALDSON FVG16 CYCLOFLOW AIR CLEANER : 13.84" (352 mm) ID: 9.47" (241 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 9.88" (251 mm) P AIR SAFETY DONALDSON FVG16 CYCLOFLOW AIR CLEANER : 8.64" (219 mm) ID: 7.06" (179 mm) : 20.66" (525 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR VEE-PAC GAS TURBINE ENGINE VPAC Width: 14.00" (356 mm) Depth: 6.21" (158 mm) : 36.12" (917 mm) Depth: 3.57" (91 mm) P AIR PANEL, VENTILATION EATON Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 25.50" (648 mm) P ALLIS CHALMERS : 10.40" (264 mm) ID: 6.04" (153 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.38" (162 mm) P AIR SAFETY ALLIS CHALMERS : 5.95" (151 mm) ID: 4.85" (123 mm) : 16.00" (406 mm) P AIR SAFETY HITACHI : 2.95" (75 mm) ID: 0.69" (18 mm) : 10.98" (279 mm) P JOHN DEERE AT39124, IHC C1 : 9.21" (234 mm) ID: 4.85" (123 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P : 7.90" (201 mm) ID: 3.60" (92 mm) Height: 10.00" (254 mm) P DONALDSON FTG15 AIR CLEANER : 12.09" (307 mm) ID: 7.73" (196 mm) : 24.00" (610 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P AIR SAFETY DONALDSON FTG15 CYCLOPAC : 7.28" (185 mm) ID: 6.20" (157 mm) : 23.00" (584 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY LEROI : 7.28" (185 mm) ID: 6.20" (157 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY ISUZU , CLARK, TIMBERJACK : 5.70" (145 mm) ID: 4.58" (116 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P GASKET, COVER DCI FTG STYLE 11" AIR CLEANERS Page 63

66 P127784, FINNED WHITE FARM : 6.09" (155 mm) ID: 3.48" (88 mm) : 13.00" (330 mm) Gasket ID: 4.75" (121 mm) Minor : 0.66" (17 mm) P AIR SAFETY DEUTZ, HESSTON : 3.41" (87 mm) ID: 2.93" (74 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P127914, FINNED FORD D0HZ9601D, MOTORCRAFT FA78 : 9.22" (234 mm) ID: 4.84" (123 mm) : 10.00" (254 mm) Gasket ID: 5.42" (138 mm) Minor : 0.53" (13 mm) P127915, FINNED FORD D0HZ9601B, MOTORCRAFT FA76 : 11.09" (282 mm) ID: 6.73" (171 mm) : 10.00" (254 mm) Gasket ID: 9.56" (243 mm) Minor : 0.66" (17 mm) P CASE, CLARK : 10.40" (264 mm) ID: 6.04" (153 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P AIR SAFETY DONALDSON STG16 DONACLONE AIR CLEANER : 10.24" (260 mm) ID: 9.12" (232 mm) : 22.00" (559 mm) Bolt Hole Diameter: 0.90" (23 mm) P LOCOMOTIVE : 12.75" (324 mm) ID: 8.42" (214 mm) : 23.00" (584 mm) P129396, KONEPAC DONALDSON EBA11 KONEPAC-TREATED W/COVER GASKET : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P129472, KONEPAC DONALDSON EBAO9 KONEPAC-TREATED W/CVR GASKET : 8.66" (220 mm) ID: 5.21" (132 mm) : 28.00" (711 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P AIR PANEL, VENTILATION ALLIS CHALMERS Width: 7.00" (178 mm) Depth: 2.19" (56 mm) Height: 26.00" (660 mm) P AIR SAFETY STEIGER : 8.66" (220 mm) ID: 7.05" (179 mm) : 16.66" (423 mm) P AIR SAFETY KOMATSU 11T , DCI ETD DRILL DUST COLLCTR : 7.93" (201 mm) ID: 3.57" (91 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) P130760, FINNED JOHN DEERE AE31723 AR84228 : 5.25" (133 mm) ID: 3.26" (83 mm) : 12.00" (305 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P130761, FINNED IHC C2 : 5.25" (133 mm) ID: 3.26" (83 mm) : 12.00" (305 mm) Gasket ID: 3.25" (83 mm) Minor : 0.66" (17 mm) P AIR PANEL, VENTILATION VENT PANEL Width: 5.00" (127 mm) Depth: 2.19" (56 mm) Height: 26.00" (660 mm) P FORD, MOTORCRAFT FA609 : 10.40" (264 mm) ID: 6.04" (153 mm) : 20.00" (508 mm) P130763, FINNED JOHN DEERE AT33363 : 6.84" (174 mm) ID: 4.24" (108 mm) : 10.00" (254 mm) Gasket ID: 5.08" (129 mm) Minor : 0.66" (17 mm) P JOHN DEERE AT35155, IHC C1 : 7.93" (201 mm) ID: 5.32" (135 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) Page 64

67 P JOHN DEERE AR46481 : 6.08" (154 mm) ID: 3.49" (89 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P JOHN DEERE AL27160 : 4.08" (104 mm) ID: 2.49" (63 mm) : 7.00" (178 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 2.62" (67 mm) P130770, FINNED JOHN DEERE AT27824 : 9.21" (234 mm) ID: 4.85" (123 mm) : 13.00" (330 mm) Gasket ID: 7.62" (194 mm) Minor : 0.66" (17 mm) P AIR SAFETY JOHN DEERE AR70107 : 5.94" (151 mm) ID: 4.86" (123 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY DEERE AL27159, FIAT , SAME : 3.00" (76 mm) ID: 2.40" (61 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) P GMC : 8.84" (225 mm) ID: 5.48" (139 mm) : 14.00" (356 mm) P130959, KONEPAC DONALDSON EBA09, CARBON TREATED W/CVR GASKET : 8.66" (220 mm) ID: 5.21" (132 mm) : 15.00" (381 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P AIR PANEL, VENTILATION GARDNER DENVER EQUIPMENT Width: 9.00" (229 mm) Depth: 2.19" (56 mm) Height: 32.00" (813 mm) P IHC R2 : 6.08" (154 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) P IHC R2 : 4.08" (104 mm) ID: 1.50" (38 mm) : 6.02" (153 mm) Bolt Hole Diameter: 0.25" (6 mm) Gasket ID: 3.09" (79 mm) P131331, FINNED IHC C2 : 6.84" (174 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P AIR SAFETY : 4.57" (116 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) P AIR SAFETY IHC C1, WHITE FARM : 5.70" (145 mm) ID: 4.58" (116 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY IHC C1, CASE A47146 : 5.94" (151 mm) ID: 4.86" (123 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY IHC C1, JOHN DEERE AE30507 : 5.94" (151 mm) ID: 4.86" (123 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR SAFETY IHC C1 : 7.64" (194 mm) ID: 6.04" (153 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P IHC C2, JOHN DEERE AT49022 : 11.09" (282 mm) ID: 6.72" (171 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (242 mm) P IHC C2 : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 8.12" (206 mm) Page 65

68 P IHC C1 : 10.40" (264 mm) ID: 6.03" (153 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P131359, FINNED IHC R93 : 5.25" (133 mm) ID: 2.64" (67 mm) : 14.00" (356 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P AIR SAFETY JOHN DEERE AT44378 : 3.36" (85 mm) ID: 2.90" (74 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) P132935, FINNED CASE A47032 : 6.84" (174 mm) ID: 4.24" (108 mm) : 14.00" (356 mm) Gasket ID: 5.42" (138 mm) Minor : 0.66" (17 mm) P AIR SAFETY CASE A47033 : 4.16" (106 mm) ID: 3.65" (93 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY STEIGER : 13.83" (351 mm) ID: 9.49" (241 mm) : 22.00" (559 mm) Bolt Hole Diameter: 0.90" (23 mm) P IHC C2, WHITE FARM : 9.21" (234 mm) ID: 5.86" (149 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.52" (191 mm) P IHC C1 : 10.40" (264 mm) ID: 6.04" (153 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P IHC R91 : 13.83" (351 mm) ID: 9.49" (241 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.53" (13 mm) P AIR SAFETY FORD : 7.28" (185 mm) ID: 6.20" (157 mm) : 15.65" (398 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION CLARK Width: 16.00" (406 mm) Depth: 2.19" (56 mm) Height: 26.00" (660 mm) P STEIGER : 8.64" (219 mm) ID: 7.06" (179 mm) : 20.66" (525 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.50" (191 mm) P AIR SAFETY ATLAS , CAT , FIAT : 4.57" (116 mm) ID: 3.46" (88 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY ALLIS CHALMERS , FIAT ALLIS : 7.64" (194 mm) ID: 6.04" (153 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) P VORTOX VF-135A : 10.37" (263 mm) ID: 5.63" (143 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 6.25" (158 mm) P UNITED 250C3S, HYSTER, TOWMOTOR, IHC : 3.50" (89 mm) ID: 2.08" (53 mm) : 10.35" (263 mm) P AIR PANEL, VENTILATION CASE F64318 Width: 7.00" (178 mm) Depth: 2.19" (56 mm) Height: 38.00" (965 mm) P UNITED 250C13S, IHC, WAYNE : 5.44" (138 mm) ID: 3.21" (82 mm) : 17.00" (432 mm) Gasket ID: 3.95" (100 mm) Page 66

69 P IHC, MACK : 8.06" (205 mm) ID: 5.78" (147 mm) : 4.00" (102 mm) Bolt Hole Diameter: 0.22" (6 mm) P UNITED 250C4S, IHC, TOWMOTOR : 4.42" (112 mm) ID: 2.21" (56 mm) : 12.25" (311 mm) Gasket ID: 3.09" (79 mm) P IR : 16.62" (422 mm) ID: 12.03" (306 mm) : 16.00" (406 mm) P FRAM CA240PLHD : 9.63" (245 mm) ID: 5.11" (130 mm) : 11.60" (295 mm) P IHC, BROS : 8.89" (226 mm) ID: 4.33" (110 mm) : 10.00" (254 mm) P DUST COLLECTORS : 16.62" (422 mm) ID: 12.03" (306 mm) : 24.00" (610 mm) P JOHN DEERE AR54336, AR79941 : 7.32" (186 mm) ID: 3.96" (101 mm) : 14.88" (378 mm) Bolt Hole Diameter: 0.39" (10 mm) P CLARK : 10.86" (276 mm) ID: 6.50" (165 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.52" (191 mm) P AIR SAFETY JOHN DEERE T52224,TIMBERJACK : 6.39" (162 mm) ID: 5.29" (134 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P WHITE FARM : 9.14" (232 mm) ID: 5.28" (134 mm) : 17.00" (432 mm) Bolt Hole Diameter: 0.90" (23 mm) P JOHN DEERE AR43941 : 6.84" (174 mm) ID: 3.49" (89 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 3.95" (100 mm) P JOHN DEERE AR79679 : 9.08" (231 mm) ID: 5.24" (133 mm) : 16.75" (425 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 6.24" (158 mm) P136258, FINNED JOHN DEERE AH19848 : 5.25" (133 mm) ID: 2.64" (67 mm) : 9.00" (229 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P UNITED 250C5S, IHC, FORD : 4.42" (112 mm) ID: 2.21" (56 mm) : 10.35" (263 mm) Gasket ID: 3.09" (79 mm) P AIR MAZE , CUMMINS : 9.60" (244 mm) ID: 5.04" (128 mm) : 7.29" (185 mm) Gasket ID: 7.30" (185 mm) P AIR PANEL, SPECIAL POLYESTER OUTER WRAP FOR P Width: 10.50" (267 mm) Depth:.89" (21 mm) Height: 28.00" (711 mm) P AIR SAFETY AIR MAZE CD , JOHN DEERE : 3.87" (98 mm) ID: 3.16" (80 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR MAZE CD , JOHN DEERE : 9.06" (230 mm) ID: 4.87" (124 mm) : 19.38" (492 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 6.24" (158 mm) Page 67

70 P AIR SAFETY AIR MAZE CD , JOHN DEERE : 4.66" (118 mm) ID: 3.97" (101 mm) : 16.50" (419 mm) Bolt Hole Diameter: 0.66" (17 mm) P IHC R91 : 6.58" (167 mm) ID: 4.27" (108 mm) : 15.00" (381 mm) P136646, KONEPAC DONALDSON EBA09 KONEPAC UNTREATED, MACK, GMC : 8.66" (220 mm) ID: 5.21" (132 mm) : 15.00" (381 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P UNITED 250C14S, HOUGH, HYSTER : 6.92" (176 mm) ID: 4.44" (113 mm) : 9.00" (229 mm) Gasket ID: 5.42" (138 mm) P WHITE MOTOR : 12.09" (307 mm) ID: 7.72" (196 mm) : 19.47" (495 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.52" (250 mm) P VORTOX VF100A : 7.32" (186 mm) ID: 3.54" (90 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 5.42" (138 mm) P VORTOX VF160A : 11.83" (300 mm) ID: 7.15" (182 mm) : 12.80" (325 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 9.00" (228 mm) P CASE : 10.40" (264 mm) ID: 6.03" (153 mm) : 12.00" (305 mm) P137285, KONEPAC SAME TRACTOR : 3.69" (94 mm) ID: 2.52" (64 mm) : 13.07" (332 mm) Gasket : 1.89" (48 mm) P137293, KONEPAC SAME TRACTOR : 5.87" (149 mm) ID: 3.14" (80 mm) : 13.03" (331 mm) Gasket : 6.93" (176 mm) P AIR PANEL, VENTILATION CRENLO Width: 7.00" (178 mm) Depth: 2.19" (56 mm) Height: 15.00" (381 mm) P AIR SAFETY IHC C1 : 5.94" (151 mm) ID: 4.86" (123 mm) : 13.50" (343 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY IHC C1 : 7.64" (194 mm) ID: 6.04" (153 mm) : 15.50" (394 mm) Bolt Hole Diameter: 0.66" (17 mm) P BULK CONVEYING EQUIPMENT : 10.40" (264 mm) ID: 6.03" (153 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P138428, KONEPAC LEYLAND-DAF ACU3994, RENAULT : 8.66" (220 mm) ID: 5.21" (132 mm) : 19.29" (490 mm) Gasket : 0.59" (15 mm) P AIR SAFETY DONALDSON FTG AIR CLEANER G : 6.40" (163 mm) ID: 5.29" (134 mm) : 18.50" (470 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY O&K HR120C EXCAVATOR : 7.64" (194 mm) ID: 6.04" (153 mm) : 21.65" (550 mm) Bolt Hole Diameter: 0.90" (23 mm) P DEUTZ , KHD : 5.00" (127 mm) ID: 2.52" (64 mm) : 11.22" (285 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 2.87" (73 mm) Page 68

71 P DEUTZ : 7.80" (198 mm) ID: 4.08" (104 mm) : 14.39" (366 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 4.96" (126 mm) P AIR PANEL, VENTILATION WAUKESHA G Width: 19.50" (495 mm) Depth: 2.19" (56 mm) Height: 25.50" (648 mm) P MARINE, FLAME RETARDANT, UL APPROVED : 11.09" (282 mm) ID: 6.73" (171 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 9.56" (242 mm) P140822, KONEPAC DONALDSON EBA09 KONEPAC- STANDARD (REV. FLOW) : 8.66" (220 mm) ID: 5.21" (132 mm) : 28.00" (711 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P141228, KONEPAC DONALDSON EBA13 KONEPAC AIR CLEANER : 12.75" (324 mm) ID: 8.32" (211 mm) : 28.00" (711 mm) Gasket : 9.81" (249 mm) Gasket ID: 5.38" (137 mm) P AIR SAFETY DONALDSON NDL Cyclopac A/C R : 2.46" (62 mm) ID: 1.94" (49 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.66" (17 mm) P141339, KONEPAC IHC C1 : 8.66" (220 mm) ID: 5.21" (132 mm) : 22.00" (559 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P142100, KONEPAC DONALDSON EBA13 KONEPAC-TREATED : 12.74" (324 mm) ID: 8.32" (211 mm) : 24.00" (610 mm) Gasket : 9.80" (249 mm) Gasket ID: 5.38" (137 mm) P AIR PANEL, ENGINE FARR PAMIC P-4, UNITED F-4 Width: 5.95" (151 mm) Depth: 7.79" (198 mm) Height: 5.95" (151 mm) P AIR PANEL, ENGINE FARR PAMIC P-6, UNITED F-6 Width: 5.95" (151 mm) Depth: 7.79" (198 mm) Height: 8.25" (210 mm) P AIR PANEL, ENGINE FARR PAMIC P-9, UNITED F-9 Width: 8.25" (210 mm) Depth: 7.79" (198 mm) Height: 8.25" (210 mm) P AIR PANEL, ENGINE FARR PAMIC P-12, UNITED F-12 Width: 8.15" (207 mm) Depth: 7.79" (198 mm) Height: 10.48" (266 mm) P141317, KONEPAC IHC C1 : 10.40" (264 mm) ID: 6.95" (177 mm) : 22.00" (559 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P AIR PANEL, ENGINE FARR PAMIC P-12-26, UNITED F Width: 5.95" (151 mm) Depth: 7.79" (198 mm) Height: 15.09" (383 mm) P AIR SAFETY JOHN DEERE AR79680 : 4.66" (118 mm) ID: 3.97" (101 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, VENTILATION JOHN DEERE AT57640, AT73529 Width: 5.00" (127 mm) Depth: 2.19" (56 mm) Height: 29.50" (749 mm) P AIR PANEL, ENGINE FARR PAMIC P-16, UNITED F-16 Width: 10.50" (267 mm) Depth: 7.79" (198 mm) Height: 10.50" (267 mm) Page 69

72 P AIR PANEL, ENGINE FARR PAMIC P-16-28, UNITED F Width: 5.95" (151 mm) Depth: 7.79" (198 mm) Height: 19.75" (502 mm) P AIR PANEL, ENGINE FARR PAMIC P-18, UNITED F-18 Width: 8.28" (210 mm) Depth: 7.79" (198 mm) Height: 15.15" (385 mm) P AIR PANEL, ENGINE FARR PAMIC P-20, UNITED F-20 Width: 10.53" (267 mm) Depth: 7.79" (198 mm) Height: 12.78" (325 mm) P AIR PANEL, ENGINE FARR PAMIC P-48, UNITED F-48 Width: 15.14" (385 mm) Depth: 7.79" (198 mm) Height: 19.74" (501 mm) P AIR PANEL, ENGINE FARR PAMIC P-64, UNITED F-64 Width: 18.74" (476 mm) Depth: 7.79" (198 mm) Height: 18.74" (476 mm) P AIR PANEL, ENGINE FARR DYNACELL T-519 Width: 19.00" (483 mm) Depth: 5.00" (127 mm) Height: 19.00" (483 mm) P AIR PANEL, ENGINE FARR PAMIC P-24, UNITED F-24 Width: 10.50" (267 mm) Depth: 7.79" (198 mm) Height: 15.09" (383 mm) P AIR PANEL, ENGINE FARR DYNACELL T-519D Width: 19.00" (483 mm) Depth: 5.00" (127 mm) Height: 19.00" (483 mm) P AIR PANEL, ENGINE FARR PAMIC P-24-38, UNITED F Width: 8.25" (210 mm) Depth: 7.79" (198 mm) Height: 19.78" (502 mm) P AIR PANEL, ENGINE FARR DYNACELL T-528 Width: 19.00" (483 mm) Depth: 5.00" (127 mm) Height: 28.50" (724 mm) P AIR PANEL, ENGINE FARR PAMIC P-32, UNITED F-32 Width: 10.50" (267 mm) Depth: 7.79" (198 mm) Height: 19.75" (502 mm) P AIR PANEL, ENGINE FARR DYNACELL T-528D Width: 14.31" (363 mm) Depth: 8.00" (203 mm) Height: 23.25" (591 mm) P AIR PANEL, ENGINE FARR PAMIC P-36, UNITED F-36 Width: 15.19" (386 mm) Depth: 7.79" (198 mm) Height: 15.19" (386 mm) P AIR PANEL, ENGINE FARR PAMIC P-40, UNITED F-40 Width: 12.84" (326 mm) Depth: 7.79" (198 mm) Height: 19.74" (501 mm) P : 5.26" (134 mm) ID: 2.64" (67 mm) : 11.00" (279 mm) P KOMATSU : 11.09" (282 mm) ID: 6.73" (171 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (242 mm) P AIR SAFETY KOMATSU : 7.28" (185 mm) ID: 6.20" (157 mm) : 17.70" (450 mm) Bolt Hole Diameter: 0.66" (17 mm) Page 70

73 P KOMATSU, DONALDSON EGB14 AIR CLEANER : 12.09" (307 mm) ID: 7.72" (196 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.93" (24 mm) Gasket ID: 10.12" (257 mm) P AIR SAFETY KOMATSU : 4.58" (116 mm) ID: 3.48" (88 mm) : 14.72" (374 mm) Bolt Hole Diameter: 0.66" (17 mm) P KOMATSU : 9.21" (234 mm) ID: 4.85" (123 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.62" (193 mm) P AIR PANEL, VENTILATION STOLPER Width: 11.00" (279 mm) Depth: 2.19" (56 mm) Height: 26.00" (660 mm) P AIR SAFETY JOHN DEERE AR80653 : 5.14" (131 mm) ID: 4.05" (103 mm) : 15.65" (398 mm) Bolt Hole Diameter: 0.66" (17 mm) P JOHN DEERE AR80652 : 9.08" (231 mm) ID: 5.24" (133 mm) : 19.38" (492 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 6.24" (158 mm) P TEREX : 11.87" (301 mm) ID: 10.25" (260 mm) : 17.66" (449 mm) Gasket : 11.46" (291 mm) Bolt Hole Diameter: 0.90" (23 mm) P GAS TURBINES, TORIT 8PP : 12.74" (324 mm) ID: 8.38" (213 mm) : 26.00" (660 mm) P AIR PANEL, VENTILATION GAS TURBINE PANEL WI/PLEAT SPACERS Width: 19.50" (495 mm) Depth: 5.19" (132 mm) Height: 19.50" (495 mm) P AIR PANEL AMERICAN LINCOLN Width: 19.68" (500 mm) Depth: 2.19" (56 mm) Height: 23.94" (608 mm) P148043, KONEPAC DONALDSON ECG11 KONEPAC-TREATED AIR CLEANER : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P148044, KONEPAC DONALDSON ECG09 KONEPAC-TREATED AIR CLEANER : 8.66" (220 mm) ID: 5.21" (132 mm) : 28.00" (711 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P148113, FINNED KUBOTA W/TOKYO ROKI AIR CLEANER : 3.27" (83 mm) ID: 1.79" (45 mm) : 7.00" (178 mm) Gasket ID: 1.98" (50 mm) Minor : 0.42" (11 mm) P148573, FINNED DONALDSON FHG08 CYCLOPAC AIR CLEANER : 6.08" (154 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P148586, FINNED DONALDSON FHG06 CYCLOPAC AIR CLEANER : 5.25" (133 mm) ID: 3.26" (83 mm) : 15.00" (381 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P AIR PANEL AMERICAN LINCOLN Width: 23.94" (608 mm) Depth: 2.19" (56 mm) Height: 25.69" (653 mm) P148932, FINNED HYSTER : 5.25" (133 mm) ID: 3.25" (83 mm) : 15.00" (381 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) Page 71

74 P148966, FINNED DONALDSON FW06 CYCLOPAC AIR CLEANER : 5.25" (133 mm) ID: 2.64" (67 mm) : 11.00" (279 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P148968, FINNED DONALDSON FW08 CYCLOPAC AIR CLEANER : 6.08" (154 mm) ID: 3.49" (89 mm) : 12.00" (305 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P148969, FINNED DONALDSON FW05 CYCLOPAC AIR CLEANER : 4.08" (104 mm) ID: 2.49" (63 mm) : 10.00" (254 mm) Gasket ID: 2.58" (66 mm) Minor : 0.66" (17 mm) P148970, FINNED DONALDSON FW04 CYCLOPAC AIR CLEANER : 3.26" (83 mm) ID: 1.68" (43 mm) : 7.00" (178 mm) Gasket : 3.00" (76 mm) Gasket ID: 2.50" (64 mm) Minor : 0.42" (11 mm) P AIR PANEL, VENTILATION CAT 4N-0015 Width: 15.00" (381 mm) Depth: 5.19" (132 mm) Height: 15.62" (397 mm) P AIR PANEL, VENTILATION AMERICAN LINCOLN Width: 23.44" (595 mm) Depth: 2.19" (56 mm) Height: 11.94" (303 mm) P SPEC. BLAST HOLE DRILL DUST COLL. : 7.93" (201 mm) ID: 3.57" (91 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P150692, KONEPAC DONALDSON ECG09 KONEPAC- STANDARD : 8.66" (220 mm) ID: 5.21" (132 mm) : 28.00" (711 mm) Gasket : 5.74" (146 mm) Gasket ID: 2.21" (56 mm) P150693, KONEPAC DONALDSON ECG09 KONEPAC : 8.66" (220 mm) ID: 5.20" (132 mm) : 28.02" (712 mm) Gasket : 7.16" (182 mm) Gasket ID: 3.70" (94 mm) P150694, KONEPAC DONALDSON ECG11 KONEPAC - STANDARD : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P150695, KONEPAC DONALDSON ECG11 KONEPAC : 10.62" (270 mm) ID: 6.69" (170 mm) : 28.02" (712 mm) Gasket : 9.21" (234 mm) Gasket ID: 5.22" (133 mm) P FRAM CA2550 : 9.50" (241 mm) ID: 6.89" (175 mm) : 27.44" (697 mm) Gasket ID: 8.12" (206 mm) P151097, KONEPAC DONALDSON EBA11 KONEPAC- STANDARD : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P FLXIBLE BUS : 12.74" (324 mm) ID: 8.38" (213 mm) : 16.00" (406 mm) Gasket ID: 10.12" (257 mm) P MAN : 8.93" (227 mm) ID: 4.56" (116 mm) : 14.50" (368 mm) Gasket ID: 5.42" (138 mm) P153551, KONEPAC DONALDSON SHORT ECG11 KONEPAC SERIES-STD : 10.62" (270 mm) ID: 6.69" (170 mm) : 22.02" (559 mm) Gasket : 9.21" (234 mm) Gasket ID: 5.22" (133 mm) P FLXIBLE BUS : 13.84" (352 mm) ID: 9.47" (241 mm) : 16.00" (406 mm) Gasket ID: 10.70" (272 mm) Page 72

75 P TRANSIT BUS : 12.74" (324 mm) ID: 8.38" (213 mm) : 16.00" (406 mm) Gasket ID: 10.12" (257 mm) P FLXIBLE BUS : 13.84" (352 mm) ID: 9.47" (241 mm) : 16.00" (406 mm) Gasket ID: 10.70" (272 mm) P154575, KONEPAC DONALDSON SHORT ECG11 KONEPAC SERIES : 10.40" (264 mm) ID: 6.95" (177 mm) : 22.00" (559 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P GASKET DONALDSON KONEPAC 11" AIR CLEANER : 11.51" (292 mm) ID: 10.79" (274 mm) Depth: 0.69" (18 mm) P154927, SPECIAL FARR ECOII # , UNITED F-ECOII 11X24 Body Diameter: 11.00" (279 mm) : 25.75" (654 mm) Outlet Diameter: 7.00" (178 mm) P GASKET, COVER DCI EBA Konepac 11" Air Cleaner P GASKET, COVER DCI AIR CLEANERS EBA13 AND ERA13 P155842, KONEPAC DONALDSON SHORT ECG11 A/C, GMC : 10.62" (270 mm) ID: 6.69" (170 mm) : 20.02" (509 mm) Gasket : 9.18" (233 mm) Gasket ID: 5.22" (133 mm) P AIR SAFETY DONALDSON FVG , WHITE MOTOR : 7.64" (194 mm) ID: 6.04" (153 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.90" (23 mm) P AIR PANEL, VENTILATION CASE/IH C1 Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 38.00" (965 mm) P AIR SAFETY CAT 2S-1285 : 4.78" (121 mm) ID: 3.62" (92 mm) : 12.08" (307 mm) Bolt Circle Diameter: 5.88" (149 mm) P AIR SAFETY CAT 2S-1286 : 6.31" (160 mm) ID: 4.63" (118 mm) : 13.08" (332 mm) Bolt Circle Diameter: 7.69" (195 mm) P AIR SAFETY CAT 2S-1287 : 6.31" (160 mm) ID: 4.63" (118 mm) : 16.15" (410 mm) Bolt Circle Diameter: 7.69" (195 mm) P AIR SAFETY CAT 2S-1284 : 3.80" (97 mm) ID: 2.64" (67 mm) : 10.08" (256 mm) Bolt Circle Diameter: 5.25" (133 mm) P AIR SAFETY CAT 3S-4745 : 8.70" (221 mm) ID: 7.00" (178 mm) : 15.28" (388 mm) Flange Diameter: 12.00" (305 mm) P AIR SAFETY CAT 4S-8834 : 7.70" (196 mm) ID: 6.00" (152 mm) : 8.78" (223 mm) Flange Diameter: 10.20" (259 mm) P AIR SAFETY CAT 4S-8340 : 7.70" (196 mm) ID: 6.00" (152 mm) : 13.38" (340 mm) Flange Diameter: 10.20" (259 mm) P AIR SAFETY CAT 9S-9972 : 6.28" (160 mm) ID: 4.59" (117 mm) : 12.96" (329 mm) Flange Diameter: 9.06" (230 mm) P AIR SAFETY CAT 1P-7360 : 7.46" (189 mm) ID: 5.99" (152 mm) : 13.38" (340 mm) Flange Diameter: 10.20" (259 mm) Page 73

76 P AIR SAFETY CAT 4N-0313 : 3.35" (85 mm) ID: 2.27" (58 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY CAT 7N-1308, 1P-8482 : 8.46" (215 mm) ID: 6.99" (178 mm) : 15.28" (388 mm) Flange Diameter: 11.38" (289 mm) P AIR SAFETY CAT 7N-9027 : 3.99" (101 mm) ID: 2.32" (59 mm) : 5.07" (129 mm) Bolt Circle Diameter: 5.25" (133 mm) P AIR SAFETY CAT 6N-6444 : 8.46" (215 mm) ID: 6.99" (178 mm) : 11.97" (304 mm) Flange Diameter: 11.38" (289 mm) P AIR SAFETY CAT 943 WHEEL/TRACK LDR, #8N-4901 : 4.60" (117 mm) ID: 3.59" (91 mm) : 12.00" (305 mm) Bolt Circle Diameter: 5.88" (149 mm) P FORD E6HZ9601A : 7.93" (201 mm) ID: 5.32" (135 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P AIR PANEL, VENTILATION JOHN DEERE AR61903 Width: 7.50" (190 mm) Depth: 2.83" (72 mm) Height: 28.00" (711 mm) P FORD D8NN9B618AA : 9.14" (232 mm) ID: 5.78" (147 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.00" (178 mm) P INSLEY , DONALDSON HEK11 ASSEMBLY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 2: 149 Micron P HYDRAULIC SEAL DONALDSON HYDRAULIC ASSEMBLIES P HYDRAULIC SEAL DONALDSON HYDRAULIC ASSEMBLIES P GROVE, DONALDSON DCI HAK05 & HDK06 : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 2: 25 Micron P HYDRAULIC SEAL DONALDSON HYDRAULIC ASSEMBLIES P DONALDSON HEK11 ASSBLY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 2: 25 Micron P CLARK ,FMC #76J1505P, DONALDSON HAK05 : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 13 Micron P AIR PANEL, VENTILATION FMC Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 30.00" (762 mm) P DONALDSON HDK06 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 2: 15 Micron P AIR SAFETY KOMATSU : 5.08" (129 mm) ID: 3.82" (97 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P JACOBSEN , IR ,DCI HHK05-RETURN : 4.39" (112 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Page 74

77 P JOY , SULLAIR , DCI HAK05/HDK06 ASY : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 2: 149 Micron P IOWA MFG , DONALDSON HHKO5-SUCTION : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 35 Micron P DONALDSON HFK08 ASSEMBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 40 Micron P GENERAL USAGE : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 25 Micron P CLARK, MARATHON LETOURNEAU # : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 35 Micron P DONALDSON HEK11 ASSBLY : 7.44" (189 mm) ID: 4.85" (123 mm) : 18.00" (457 mm) Efficiency Beta 75: 35 Micron P IR , DONALDSON HHK05-RETURN : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 25 Micron P IR , DONALDSON HAK05 : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 37 Micron P DONALDSON HAK05, HDK06 ASSEMBLIES, 1/2 MEDIA : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 2 Micron P TAYLOR MACHINE , DCI HHK05- RETURN : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 2: 149 Micron P HYDRAULIC STRAINER DONALDSON HSK02 ASSBLY : 3.75" (95 mm) ID: 0.71" (18 mm) : 0.22" (5 mm) Efficiency Beta 2: 175 Micron P OWATONNA TOOL : 1.12" (28 mm) ID: 0.89" (23 mm) : 5.07" (129 mm) P DONALDSON HHK05 ASSEMBLY, EATON : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 75: 35 Micron P AMER H&D : 7.44" (189 mm) ID: 4.85" (123 mm) : 18.00" (457 mm) Efficiency Beta 75: 25 Micron P DONALDSON HHK05 ASSBLY : 4.39" (112 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) P IOWA MFG , AMER H&D : 4.38" (111 mm) ID: 2.44" (62 mm) : 10.00" (254 mm) Efficiency Beta 75: 35 Micron P DRILTECH # : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 2: 74 Micron Page 75

78 P SULLAIR 1847C : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 2: 74 Micron P AMER H&D : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 75: 35 Micron P DONALDSON HHK05 ASSBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 75: 35 Micron P DONALDSON HPK03 ASSBLY : 3.10" (79 mm) ID: 1.73" (44 mm) : 8.00" (203 mm) Efficiency Beta 75: 16 Micron P HPK03 ELEMENT : 3.10" (79 mm) ID: 1.74" (44 mm) : 8.00" (203 mm) Efficiency Beta 75: 25 Micron P DONALDSON HPK03 ASSBLY : 3.10" (79 mm) ID: 1.73" (44 mm) : 8.00" (203 mm) Efficiency Beta 75: 35 Micron P HYDRAULIC SPIN-ON IHC C2, : 5.00" (127 mm) Thread Size: 3-8 : 8.81" (224 mm) Gasket : 5.00" (127 mm) Gasket ID: 4.50" (114 mm) Efficiency Beta 2: 15 Micron P DONALDSON HPK04 ASSEMBLY : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.03" (204 mm) Efficiency Beta 2: 74 Micron P DRILTECH, SULLAIR : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 37 Micron P DONALDSON HPK03 ASSBLY : 3.10" (79 mm) ID: 1.73" (44 mm) : 8.00" (203 mm) Efficiency Beta 75: 17 Micron P CASE , DONALDSON HAK05 ASSY : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 2: 149 Micron P HYDRAULIC SPIN-ON M/F M91, CHARLYNN 5610, DCI HBK04 ASSY : 3.69" (94 mm) Thread Size: 1 1/4-12 : 5.37" (136 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency Beta 2: 10 Micron P CASE N6665 : 4.39" (112 mm) ID: 2.44" (62 mm) : 12.25" (311 mm) P HYDRAULIC SPIN-ON, DURAMAX CAT 8T-7478, DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE D89909, DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 23 Micron P HYDRAULIC SPIN-ON, DURAMAX CLARK , DONALDSON HMK04 ASSY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 9 Micron Page 76

79 P HYDRAULIC SPIN-ON, DURAMAX CASE N7332, IR # , DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC SPIN-ON, DURAMAX IHC C1, DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 15 Micron P HYDRAULIC SPIN-ON, DURAMAX CLARK , TRAILMOBILE , DCI HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE L36242, KOEHRING , DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 30 Micron P HYDRAULIC SPIN-ON, DURAMAX IR , DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 30 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE D120594, FIAT ALLIS , DCI HMK04 : 3.70" (94 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC SPIN-ON IHC C1, C2 : 5.00" (127 mm) Thread Size: 3-8 : 12.25" (311 mm) Gasket : 5.00" (127 mm) Gasket ID: 4.50" (114 mm) Efficiency Beta 2: 15 Micron P PUROLATOR, INGERSOLL RAND : 4.00" (102 mm) ID: 1.06" (27 mm) : 6.00" (152 mm) Efficiency Beta 75: 35 Micron P PUROLATOR, INGERSOLL RAND : 5.94" (151 mm) ID: 1.75" (44 mm) : 7.12" (181 mm) Efficiency Beta 2: 25 Micron P PUROLATOR, INGERSOLL RAND, GARDNER/DENVER : 5.94" (151 mm) ID: 1.75" (44 mm) : 7.12" (181 mm) Efficiency Beta 75: 35 Micron P BUCYRUS ERIE # : 6.00" (152 mm) ID: 3.96" (101 mm) : 11.92" (303 mm) Efficiency Beta 75: 13 Micron P HYSTER S : 4.00" (102 mm) ID: 1.56" (40 mm) : 14.81" (376 mm) Efficiency Beta 75: 35 Micron P HYSTER, WABCO VS7413 : 5.07" (129 mm) ID: 3.34" (85 mm) : 9.00" (229 mm) Efficiency Beta 75: 17 Micron P DONALDSON HEK11 ASSEMBLY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 2 Micron P HYDRAULIC SPIN-ON, DURAMAX CAT 09O-2900, HYSTER , DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 23 Micron Page 77

80 P HYDRAULIC SPIN-ON, DURAMAX CASE A165029, DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX KOEHRING , DONALDSON HMK04 ASSY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX HAWKER SIDDLEY # , DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 33 Micron P HYDRAULIC SPIN-ON, DURAMAX HYSTER , DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 16 Micron P SCHROEDER KS7 : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 10 Micron P SCHROEDER KS15 : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 22 Micron P DONALDSON HFK08 ASSEMBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 2: 149 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 8 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 14 Micron P PALL HC9600FUS4H : 3.10" (79 mm) ID: 1.71" (43 mm) : 4.45" (113 mm) Efficiency Beta 75: 10 Micron P PALL HC9600FUS8H, DONALDSON HPK03/HPK04 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 10 Micron P PALL HC9600FUS13H : 3.10" (79 mm) ID: 1.71" (43 mm) : 12.76" (324 mm) Efficiency Beta 75: 10 Micron P PALL HC9600FUS16H, DONALDSON HPK04 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 10 Micron P PALL HC9600FUT4H : 3.10" (79 mm) ID: 1.71" (43 mm) : 4.45" (113 mm) Efficiency Beta 75: 22 Micron P PALL HC9600FUT8H, DONALDSON HPK03/HPK04 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.20" (208 mm) Efficiency Beta 75: 22 Micron P PALL HC9600FUT13H : 3.10" (79 mm) ID: 1.71" (43 mm) : 12.93" (328 mm) Efficiency Beta 75: 22 Micron P PALL HC9600FUT16H,PUROLATOR , DCI HPKO4 : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.84" (428 mm) Efficiency Beta 75: 22 Micron Page 78

81 P CAT 9M-9740, 2M-3943, 1M-9156 : 4.00" (102 mm) ID: 2.30" (58 mm) : 9.25" (235 mm) Efficiency Beta 75: 16 Micron P CAT 4J-0816 : 3.34" (85 mm) ID: 1.86" (47 mm) : 9.00" (229 mm) Efficiency Beta 75: 16 Micron P CAT 4J-6064,4J-0806, 2J-1560 : 5.07" (129 mm) ID: 3.34" (85 mm) : 9.00" (229 mm) Efficiency Beta 75: 16 Micron P CAT 7J-0670 : 6.84" (174 mm) ID: 4.23" (107 mm) : 9.00" (229 mm) Efficiency Beta 75: 16 Micron P PALL HC8300FUS8H : 6.02" (153 mm) ID: 4.12" (105 mm) : 8.13" (207 mm) Efficiency Beta 75: 10 Micron P PALL HC8300FUT8H : 6.02" (153 mm) ID: 4.12" (105 mm) : 8.13" (207 mm) Efficiency Beta 75: 22 Micron P PALL HC8300FUS16H : 6.02" (153 mm) ID: 4.17" (106 mm) : 16.77" (426 mm) Efficiency Beta 75: 10 Micron P PALL HC8300FUT16H : 6.02" (153 mm) ID: 4.17" (106 mm) : 16.77" (426 mm) Efficiency Beta 75: 22 Micron P PALL HC9400FUS13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 10 Micron P PALL HC9400FUT13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 22 Micron P PALL HC9400FUS26H, DONALDSON HPK05 ASSY : 3.75" (95 mm) ID: 2.21" (56 mm) : 25.53" (648 mm) Efficiency Beta 75: 10 Micron P PALL HC9400FUT26H, DONALDSON HPK05 ASSY : 3.75" (95 mm) ID: 2.21" (56 mm) : 25.53" (648 mm) Efficiency Beta 75: 22 Micron P CAT 9J-0750, 9J-5461, GMC : 5.07" (129 mm) ID: 3.34" (85 mm) : 11.00" (279 mm) Efficiency Beta 75: 16 Micron P DONALDSON HHK05 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 17 Micron P IHC C2 : 7.44" (189 mm) ID: 4.85" (123 mm) : 18.00" (457 mm) Efficiency Beta 75: 35 Micron P HYSTER : 4.00" (102 mm) ID: 1.56" (40 mm) : 14.81" (376 mm) Efficiency Beta 75: 13 Micron P HYDRAULIC SPIN-ON IR , CHARLYNN 5604, DCI HBK04 ASSY : 3.69" (94 mm) Thread Size: 1 1/4-12 : 5.37" (136 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency Beta 2: 25 Micron Page 79

82 P HYDRAULIC SPIN-ON GARDNER DENVER , DONALDSON HBK04 ASSY : 3.69" (94 mm) Thread Size: 1 1/4-12 : 8.69" (221 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON IR , DONALDSON HBK04 ASSEMBLY : 3.69" (94 mm) Thread Size: 1 1/4-12 : 8.69" (221 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency Beta 2: 25 Micron P PALL HC9600FUS4Z : 3.10" (79 mm) ID: 1.71" (43 mm) : 4.45" (113 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE X724693, DONALDSON HMK04 : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 22 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE N9025, CAT 9T-5916, DEERE AH : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 16 Micron P DONALDSON HFK08 ASSBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 2 Micron P PALL HC9600FUS8Z, DONALDSON HPK03 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 16 Micron P DONALDSON HEK11 HYD ASSY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 37 Micron P PALL HC9600FUS16Z, DONALDSON HPK04 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 16 Micron P PALL HC9600FUT4Z : 3.10" (79 mm) ID: 1.71" (43 mm) : 4.62" (117 mm) P HYDRAULIC SPIN-ON, DURAMAX CLARK , DONALDSON HMK04 ASSY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX ADVANCE , KOEHRING (DCI HMK04) : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 11 Micron P PARKER : 2.44" (62 mm) ID: 1.00" (25 mm) : 5.00" (127 mm) Efficiency Beta 75: 35 Micron P PALL HC9400FUS39H : 3.75" (95 mm) ID: 2.18" (55 mm) : 38.52" (978 mm) Efficiency Beta 75: 10 Micron P PALL HC8300FUS39H : 6.02" (153 mm) ID: 4.16" (106 mm) : 38.62" (981 mm) Efficiency Beta 75: 16 Micron P PALL HC8300FUN8H : 6.02" (153 mm) ID: 4.12" (105 mm) : 8.13" (207 mm) Efficiency Beta 75: 5 Micron Page 80

83 P PALL HC8300FUN16H : 6.02" (153 mm) ID: 4.17" (106 mm) : 16.77" (426 mm) P PALL HC8300FUN8Z, PARKER : 6.02" (153 mm) ID: 4.12" (105 mm) : 8.13" (207 mm) Efficiency Beta 75: 5 Micron P PALL HC9400FUN13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 5 Micron P PALL HC9400FUN26H, DONALDSON HPK05 ASSY : 3.75" (95 mm) ID: 2.21" (56 mm) : 25.53" (648 mm) Efficiency Beta 75: 5 Micron P PALL HC9600FUN4H : 3.10" (79 mm) ID: 1.71" (43 mm) : 4.45" (113 mm) Efficiency Beta 75: 5 Micron P PALL HC9600FUN8H, DONALDSON HPK03 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 5 Micron P PALL HC9600FUN13H : 3.10" (79 mm) ID: 1.71" (43 mm) : 12.76" (324 mm) Efficiency Beta 75: 5 Micron P PALL HC9600FUN16H, DONALDSON HPK04 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 5 Micron P PALL HC9600FUN8Z, DONALDSON HPK04 ASSY : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 5 Micron P PALL HC9600FKN16Z : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 5 Micron P DEERE AT78046, GROVE ,DCI HAK05/HKD06 : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 16 Micron P DONALDSON HAK05 & HDK06 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 22 Micron P DONALDSON HFK08 ASSEMBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 16 Micron P DONALDSON HFK08 ASSEMBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 22 Micron P GROVE # , DONALDSON HEK11 ASSY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 22 Micron P SCHROEDER JS-7 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 10 Micron P SCHROEDER J10 OR J25 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 22 Micron P SCHROEDER AS-7, A-3 : 2.99" (76 mm) ID: 1.04" (26 mm) : 4.75" (121 mm) Efficiency Beta 75: 10 Micron Page 81

84 P SCHROEDER A10 OR A25 : 2.99" (76 mm) ID: 1.04" (26 mm) : 4.75" (121 mm) Efficiency Beta 75: 22 Micron P PALL HC8400FUS16H, HARNISCHFEGER 1046Z493 : 6.02" (153 mm) ID: 3.28" (83 mm) : 16.77" (426 mm) Efficiency Beta 75: 22 Micron P PALL HC8400FUS26H : 6.02" (153 mm) ID: 3.28" (83 mm) : 25.62" (651 mm) Efficiency Beta 75: 10 Micron P DONALDSON HHK05 ASSBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 75: 10 Micron P JOHN DEERE AR94510 : 4.61" (117 mm) ID: 2.19" (56 mm) : 7.79" (198 mm) Efficiency Beta 75: 17 Micron P PALL HC9020FUS4H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 4.31" (109 mm) Efficiency Beta 75: 10 Micron P PALL HC9020FUS8H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 7.94" (202 mm) Efficiency Beta 75: 10 Micron P PALL HC9020FUN4H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 4.31" (109 mm) Efficiency Beta 75: 5 Micron P PALL HC9020FUN8H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 7.94" (202 mm) Efficiency Beta 75: 5 Micron P PARKER , : 2.73" (69 mm) ID: 1.68" (43 mm) : 3.56" (90 mm) P JOHN DEERE AR98098 : 4.61" (117 mm) ID: 2.19" (56 mm) : 7.79" (198 mm) Efficiency Beta 75: 22 Micron P PALL HC8500FUS8H : 3.76" (96 mm) ID: 1.72" (44 mm) : 8.05" (204 mm) Efficiency Beta 75: 16 Micron P PALL HC8500FUS13H : 3.76" (96 mm) ID: 1.72" (44 mm) : 12.80" (325 mm) Efficiency Beta 75: 10 Micron P PALL HC8500FUS26H : 3.76" (96 mm) ID: 1.72" (44 mm) : 25.57" (649 mm) Efficiency Beta 75: 10 Micron P PARKER , : 2.73" (69 mm) ID: 1.68" (43 mm) : 5.56" (141 mm) Efficiency Beta 75: 40 Micron P PALL HC9020FUT4H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 4.31" (109 mm) Efficiency Beta 75: 22 Micron P PALL HC9020FUT8H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 7.94" (202 mm) Efficiency Beta 75: 22 Micron P PALL HC8400FUN16H : 6.02" (153 mm) ID: 3.28" (83 mm) : 16.77" (426 mm) Efficiency Beta 75: 5 Micron Page 82

85 P PALL HC8400FUN26H : 6.02" (153 mm) ID: 3.28" (83 mm) : 25.62" (651 mm) Efficiency Beta 75: 5 Micron P PALL HC8400FUT8H : 6.02" (153 mm) ID: 3.28" (83 mm) : 8.13" (207 mm) Efficiency Beta 75: 22 Micron P PALL HC8400FUT16H : 6.02" (153 mm) ID: 3.28" (83 mm) : 16.77" (426 mm) Efficiency Beta 75: 22 Micron P CLARK : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 25 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 2 Micron P JOHN DEERE RE11889 : 4.61" (117 mm) ID: 2.19" (56 mm) : 5.29" (134 mm) Efficiency Beta 75: 16 Micron P PALL HC8500FUN8H : 3.76" (96 mm) ID: 1.72" (44 mm) : 8.05" (204 mm) Efficiency Beta 75: 5 Micron P JOHN DEERE AR99661 : 5.51" (140 mm) ID: 2.63" (67 mm) : 7.83" (199 mm) Efficiency Beta 75: 22 Micron P PALL HC8500FUN13H : 3.76" (96 mm) ID: 1.72" (44 mm) : 12.80" (325 mm) Efficiency Beta 75: 5 Micron P PALL HC8500FUN26H : 3.76" (96 mm) ID: 1.72" (44 mm) : 25.57" (649 mm) Efficiency Beta 75: 5 Micron P PALL HC8500FUT13H : 3.76" (96 mm) ID: 1.72" (44 mm) : 12.80" (325 mm) Efficiency Beta 75: 22 Micron P PALL HC8500FUT26H : 3.76" (96 mm) ID: 1.72" (44 mm) : 25.57" (649 mm) Efficiency Beta 75: 22 Micron P CAT 4T-3131 : 4.00" (102 mm) ID: 2.30" (58 mm) : 9.25" (235 mm) Efficiency Beta 75: 5 Micron P CAT 4T-3132 : 5.07" (129 mm) ID: 3.34" (85 mm) : 9.00" (229 mm) Efficiency Beta 75: 5 Micron P CAT 4T-3133 : 6.84" (174 mm) ID: 4.23" (107 mm) : 9.00" (229 mm) Efficiency Beta 75: 13 Micron P FIAT ALLIS # : 5.07" (129 mm) ID: 3.35" (85 mm) : 9.00" (229 mm) Page 83

86 P HYDRAULIC SPIN-ON CASE D59062 : 3.88" (99 mm) Thread Size: 1 5/16-12 : 5.75" (146 mm) Gasket : 3.51" (89 mm) Gasket ID: 3.23" (82 mm) Efficiency Beta 2: 10 Micron P IR , : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 35 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 4 Micron P GROVE, HARNISHFEGER, DONALDSON HAK05 : 4.38" (111 mm) ID: 2.44" (62 mm) : 13.00" (330 mm) Efficiency Beta 75: 22 Micron P TIMBERJACK : 4.38" (111 mm) ID: 1.98" (50 mm) : 8.00" (203 mm) Efficiency Beta 75: 25 Micron P DONALDSON HEK11 ASSEMBLY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 13 Micron P GENERAL HIGH PERF CARTRIDGE : 4.50" (114 mm) ID: 2.24" (57 mm) : 9.53" (242 mm) Efficiency Beta 75: 22 Micron P DONALDSON HPK03,HPK04 ASSEMBLIES : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 40 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 33 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 33 Micron P HYDRAULIC SPIN-ON, DURAMAX CAT, CLARK, IHC, HYSTER, DCI HMK05 & HMK25 ASSY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 16 Micron P PALL HC9650FUN8H : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.37" (213 mm) Efficiency Beta 75: 5 Micron P PALL HC9650FUS8H : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.37" (213 mm) Efficiency Beta 75: 10 Micron P PALL HC9650FUT8H : 3.10" (79 mm) ID: 1.71" (43 mm) : 8.37" (213 mm) Efficiency Beta 75: 22 Micron P PALLHC9650FUN16H : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 5 Micron P PALL HC9650FUS16H : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 10 Micron Page 84

87 P PALL HC9650FUT16H : 3.10" (79 mm) ID: 1.71" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 22 Micron P DONALDSON HAK05 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 5 Micron P DONALDSON HAK05 & HDK06 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 5 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE N9086, DONALDSON HMK05, HMK25 ASSEMBLY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX LEROI , DONALDSON HMK05 & HMK25 ASSY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 33 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05 & HMK25 ASSEMBLY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX CHAMPION 37104, CLARK , DCI HMK05,HMK25 : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 16 Micron P WABCO PB4545 : 5.07" (129 mm) ID: 3.34" (85 mm) : 18.50" (470 mm) Efficiency Beta 75: 17 Micron P HYDRAULIC SPIN-ON PALL HC7500SKN8H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 2 Micron P PARKER (x2) & Connector : 5.62" (143 mm) ID: 3.72" (95 mm) : 24.19" (614 mm) Efficiency Beta 2: 20 Micron P HYDRAULIC SPIN-ON PALL HC7500SUS4H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 2 Micron P HYDRAULIC SPIN-ON PALL HC7500SUS8H, HC7500SUK8H, DCI HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 2 Micron P HYDRAULIC SPIN-ON PALL HC7500SUT4H, ZINGA SE-25, DCI HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON PALL HC7500SUT8H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON PALL HC7500SUK4H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 20 Micron Page 85

88 P HYDRAULIC SPIN-ON PALL HC7500SUK8H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 20 Micron P TRANSMISSION CARTRIDGE DET. DIESEL, GMC # , (CLEAN UP) : 3.10" (79 mm) ID: 2.18" (55 mm) Efficiency 99%: 5 Micron : 16.68" (424 mm) P TRANSMISSION CARTRIDGE DETROIT DIESEL, GMC # : 3.10" (79 mm) ID: 2.18" (55 mm) Efficiency 99%: 16 Micron : 16.68" (424 mm) P KOEHRING , , : 6.50" (165 mm) ID: 3.54" (90 mm) : 15.12" (384 mm) Efficiency Beta 75: 16 Micron P DONALDSON HAK05 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 16 Micron P DONALDSON HAK05 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 22 Micron P PARKER : 5.62" (143 mm) ID: 3.72" (95 mm) : 12.00" (305 mm) Efficiency Beta 75: 40 Micron P IR : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 2: 25 Micron P DONALDSON HFK08 ASSEMBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 5 Micron P KOEHRING 288B1984 : 6.50" (165 mm) ID: 3.00" (76 mm) : 18.50" (470 mm) Efficiency Beta 75: 16 Micron P TRANSMISSION CARTRIDGE DDA, GMC # (CLEANUP) : 4.30" (79 mm) ID: 1.71" (43 mm) Efficiency 99%: 5 Micron : 12.76" (324 mm) P TRANSMISSION CARTRIDGE DDA, GMC # : 3.12" (79 mm) ID: 1.71" (43 mm) Efficiency 99%: 16 Micron : 12.76" (324 mm) P TRANSMISSION CARTRIDGE GM 53, 71, 92 SERIES, DD : 4.30" (109 mm) ID: 1.40" (36 mm) Efficiency 99%: 17 Micron Efficiency 99%: 22 Micron : 8.90" (226 mm) P TRANSMISSION CARTRIDGE DDA #557498, GMC TRANSMISSIONS : 3.75" (95 mm) ID: 1.40" (36 mm) Efficiency 99%: 16 Micron : 8.90" (226 mm) P LUBE CARTRIDGE FULL FLOW CAT 5S-0485 : 5.07" (129 mm) ID: 3.34" (85 mm) : 9.00" (229 mm) Efficiency 99%: 22 Micron P TROJAN : 5.07" (129 mm) ID: 3.35" (85 mm) : 9.00" (229 mm) Efficiency Beta 75: 25 Micron P LUBE SPIN-ON FULL FLOW GM CAR & TRUCK : 3.73" (95 mm) Thread Size: 13/16-16 : 5.37" (136 mm) Gasket : 3.45" (88 mm) Gasket ID: 3.00" (76 mm) Efficiency 99%: 22 Micron Page 86

89 P DONALDSON HAK05 ASSEMBLY : 4.38" (111 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 40 Micron P HFK08 ELEMENT (SPECIAL APPLICATION) : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) P HYDRAULIC SPIN-ON PALL HC7500SUN4H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 2 Micron P PALL HC9021FUP4Z, DCI HPK02 ASSY : 1.75" (44 mm) ID: 1.00" (25 mm) : 4.44" (113 mm) Efficiency Beta 75: 3 Micron P PALL HC9601FUP8H : 3.12" (79 mm) ID: 1.70" (43 mm) : 8.20" (208 mm) Efficiency Beta 75: 3 Micron P PALL HC9601FUT8H, DONALDSON HPK04 ASSEMBLY : 3.12" (79 mm) ID: 1.70" (43 mm) : 8.20" (208 mm) Efficiency Beta 75: 10 Micron P PALL HC9601FUP16H, DONALDSON HYDRAULIC ASSEMBLY : 3.12" (79 mm) ID: 1.70" (43 mm) : 16.81" (427 mm) Efficiency Beta 75: 3 Micron P PALL HC9601FUT16H, DONALDSON HYDRAULIC ASSEMBLY : 3.12" (79 mm) ID: 1.70" (43 mm) : 16.81" (427 mm) Efficiency Beta 75: 10 Micron P PALL HC9021FUT4Z, DCI HPK02 ASSY : 1.75" (44 mm) ID: 1.00" (25 mm) : 4.44" (113 mm) Efficiency Beta 75: 10 Micron P PALL HC9021FUP8Z, DCI HPK02 ASSEMBLY : 1.75" (44 mm) ID: 1.00" (25 mm) : 8.12" (206 mm) Efficiency Beta 75: 3 Micron P PALL HC9021FUT8Z, DCI HPK02 ASSY : 1.75" (44 mm) ID: 1.00" (25 mm) : 8.12" (206 mm) Efficiency Beta 75: 10 Micron P PALL HC9601FUP4Z, HC9601FUP4H : 3.12" (79 mm) ID: 1.70" (43 mm) : 4.55" (116 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC FILTER SEAL DONALDSON HYDRAULIC ASSEMBLIES P PALL HC9801FUP4Z : 2.00" (51 mm) ID: 0.94" (24 mm) : 4.56" (116 mm) Efficiency Beta 75: 3 Micron P SCHROEDER K10, KK10 HYD APPL : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 25 Micron P PALL HC9601FUP13H, DONALDSON HYDRAULIC ASSEMBLY : 3.12" (79 mm) ID: 1.70" (43 mm) : 12.95" (329 mm) Efficiency Beta 75: 3 Micron P PALL HC9601FUT13H, DONALDSON HYDRAULIC ASSEMBLY : 3.12" (79 mm) ID: 1.70" (43 mm) : 12.95" (329 mm) Efficiency Beta 75: 10 Micron Page 87

90 P PALL HC9801FUT4H, DONALDSON HYDRAULIC ASSEMBLY : 2.00" (51 mm) ID: 0.94" (24 mm) : 4.56" (116 mm) Efficiency Beta 75: 10 Micron P PALL HC9801FUP8H, DONALDSON HYDRAULIC ASSEMBLY : 2.00" (51 mm) ID: 0.94" (24 mm) : 8.23" (209 mm) Efficiency Beta 75: 3 Micron P SCHROEDER A-3 : 3.00" (76 mm) ID: 1.04" (26 mm) : 4.75" (121 mm) Efficiency Beta 75: 16 Micron P SCHROEDER A-10 : 3.00" (76 mm) ID: 1.04" (26 mm) : 4.75" (121 mm) Efficiency Beta 75: 25 Micron P PALL HC9801FUT8H, DONALDSON HYDRAULIC ASSEMBLY : 2.00" (51 mm) ID: 0.94" (24 mm) : 8.23" (209 mm) Efficiency Beta 75: 10 Micron P GASKET COVER 500, 750 BYPASS HOUSINGS BEVELED X SECTION : 8.97" (228 mm) ID: 8.47" (215 mm) Depth: 0.25" (6 mm) P PALL HC9801FUT13Z : 2.00" (51 mm) ID: 0.94" (24 mm) : 12.87" (327 mm) Efficiency Beta 75: 10 Micron P GASKET, COVER 500, 750 BYPASS HOUSINGS SQUARE X SECTION : 8.55" (218 mm) ID: 8.00" (203 mm) : 0.27" (7 mm) P SCHROEDER K25 HYD APPL : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 2: 20 Micron P O-RING, COVER GASKET 500, 750 BYPASS HOUSINGS ROUND X SECTION P SCHROEDER K-3 : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 16 Micron P WASHER GASKET 750 SERIES, MEL C T-HANDLE HOLD- DOWN WASHER : 1.06" (27 mm) ID: 0.61" (15 mm) Height: 0.19" (5 mm) P SCHROEDER J-10 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 25 Micron P SCHROEDER J-3 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSEMBLY : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON : 3.71" (94 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Page 88

91 P LUBE SPIN-ON FULL FLOW MERCEDES : 4.65" (118 mm) Thread Size: 1 1/2-12 : 10.24" (260 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.84" (98 mm) Efficiency 99%: 15 Micron P CLARK : 5.93" (151 mm) ID: 2.16" (55 mm) : 17.00" (432 mm) Efficiency Beta 75: 35 Micron P HYDRAULIC SPIN-ON DONALDSON HBK05 ASSEMBLY : 5.06" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 75: 2 Micron P HYDRAULIC SPIN-ON ALLISON AT500,MT600 TRANSMISSION # : 3.72" (95 mm) Thread Size: 1 1/2-16 : 5.82" (148 mm) Gasket : 3.45" (88 mm) Gasket ID: 2.97" (75 mm) P HYDRAULIC SPIN-ON JOY : 3.75" (95 mm) Thread Size: 1 1/2-16 : 5.82" (148 mm) Gasket : 3.45" (88 mm) Gasket ID: 2.97" (75 mm) Efficiency Beta 2: 9 Micron P HYDRAULIC SPIN-ON PALL HC7500SUP8H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 75: 3 Micron P PALL HC8300FUP16H : 6.02" (153 mm) ID: 4.17" (106 mm) : 16.77" (426 mm) Efficiency Beta 75: 3 Micron P PALL HC8300FUP39H : 6.02" (153 mm) ID: 4.12" (105 mm) : 38.62" (981 mm) Efficiency Beta 75: 3 Micron P PALL HC9020FUP8H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 7.94" (202 mm) Efficiency Beta 75: 3 Micron P PALL HC9400FUP26H, DONALDSON HPK05 ASSY : 3.75" (95 mm) ID: 2.21" (56 mm) : 25.53" (648 mm) Efficiency Beta 75: 3 Micron P PALL HC9600FUP8H, DONALDSON HPK03 ASSY : 3.10" (79 mm) ID: 1.68" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 3 Micron P PALL HC9601FUT4H, PARKER : 3.15" (80 mm) ID: 1.72" (44 mm) : 4.61" (117 mm) Efficiency Beta 75: 10 Micron P JOHN DEERE AT67960 : 2.90" (74 mm) ID: 1.13" (29 mm) : 7.39" (188 mm) Efficiency Beta 75: 22 Micron P PALL HC8900FDN13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 5 Micron P PALL HC8900FUS13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 10 Micron P PALL HC8900FUT8H : 3.75" (95 mm) ID: 2.21" (56 mm) : 8.01" (203 mm) Efficiency Beta 75: 22 Micron P PALL HC8900FUT13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 22 Micron Page 89

92 P PALL HC8900FUT16H : 3.75" (95 mm) ID: 2.21" (56 mm) : 16.68" (424 mm) Efficiency Beta 75: 22 Micron P PALL HC8900FDN16H : 3.75" (95 mm) ID: 2.21" (56 mm) : 16.68" (424 mm) Efficiency Beta 75: 5 Micron P PALL HC8900FUS16H : 3.75" (95 mm) ID: 2.21" (56 mm) : 16.68" (424 mm) Efficiency Beta 75: 10 Micron P HYDRAULIC SPIN-ON DONALDSON HBK05 ASSEMBLY : 4.87" (124 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 5 Micron P HYDRAULIC SPIN-ON DONALDSON HBK05 ASSEMBLY : 4.78" (121 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 5 Micron P HYDRAULIC STRAINER SEH-5-1/2-100 : 2.63" (67 mm) Thread Size: 1/2 NPT : 3.10" (79 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH-8-3/4-100 : 2.63" (67 mm) Thread Size: 3/4 NPT : 3.55" (90 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH : 2.63" (67 mm) Thread Size: 1 NPT : 5.35" (136 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH /4-100 : 3.38" (86 mm) Thread Size: 1 1/4 NPT : 6.85" (174 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH /2-100 : 3.38" (86 mm) Thread Size: 1 1/2 NPT : 8.01" (203 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH /2-100 : 3.94" (100 mm) Thread Size: 1 1/2 NPT : 9.85" (250 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH : 3.94" (100 mm) Thread Size: 2 NPT : 9.85" (250 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEC /2-100 : 5.12" (130 mm) Thread Size: 2 1/2 NPT : 10.10" (257 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEC : 5.12" (130 mm) Thread Size: 3 NPT : 11.78" (299 mm) Efficiency 50%: 149 Micron P LUBE SPIN-ON FULL FLOW HIGH EFFICIENCY VERSION OF P : 3.67" (93 mm) Thread Size: 3/4-16 : 5.32" (135 mm) Relief Valve Setting: 8-11 PSI ( Bar) Gasket : 2.85" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency 99%: 22 Micron P HYDRAULIC SPIN-ON Case C1 : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 2 Micron P HYDRAULIC SPIN-ON JOHN DEERE AM : 3.82" (97 mm) Thread Size: 1 3/8-12 : 4.47" (114 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 2: 10 Micron Page 90

93 P JOHN DEERE AT67957 : 2.90" (74 mm) ID: 1.12" (28 mm) : 3.62" (92 mm) Efficiency Beta 75: 22 Micron P HYDRAULIC SPIN-ON IR : 3.69" (94 mm) Thread Size: 1 1/4-12 : 8.76" (223 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON Case A : 5.08" (129 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 5 Micron P FUEL SPIN-ON PRIMARY : 4.23" (107 mm) Thread Size: 1-14 : 10.31" (262 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) P FUEL SPIN-ON PRIMARY CAT 6L-7440, 1P-2299, 8L-974O : 3.67" (93 mm) Thread Size: 1-14 : 6.95" (177 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 5 Micron P SCHROEDER KS-1 : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 3 Micron P SCHROEDER KS3 : 3.85" (98 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 5 Micron P HYDRAULIC SPIN-ON PALL HC7400SUP8H, HC7400SUN8H : 3.72" (95 mm) Thread Size: 1 1/2-16 : 8.02" (204 mm) Gasket : 3.45" (88 mm) Gasket ID: 2.97" (75 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON PALL HC7400SUT8H,HC7400SUS8H,HC7400SUK 8H : 3.75" (95 mm) Thread Size: 1 1/2-16 : 8.02" (204 mm) Gasket : 3.45" (88 mm) Gasket ID: 2.97" (75 mm) Efficiency Beta 2: 9 Micron P DONALDSON HYDRAULIC ASSEMBLY : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.25" (235 mm) Efficiency Beta 75: 40 Micron P PALL HC9651FUP8H : 3.12" (79 mm) ID: 1.70" (43 mm) : 8.20" (208 mm) Efficiency Beta 75: 3 Micron P PALL HC9651FUP16H : 3.12" (79 mm) ID: 1.70" (43 mm) : 17.06" (433 mm) Efficiency Beta 75: 3 Micron P PALL HC9651FUT8H : 3.12" (79 mm) ID: 1.70" (43 mm) : 8.20" (208 mm) Efficiency Beta 75: 10 Micron P PALL HC9020FUP4H, DONALDSON HPK02 ASSY : 1.77" (45 mm) ID: 1.00" (25 mm) : 4.31" (109 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON PALL HC7500SUP4H, DONALDSON HBK05 ASSY : 5.08" (129 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 75: 3 Micron P PALL HC9600FUP4H : 3.10" (79 mm) ID: 1.68" (43 mm) : 4.45" (113 mm) Efficiency Beta 75: 3 Micron Page 91

94 P PALL HC9600FUP13H : 3.10" (79 mm) ID: 1.68" (43 mm) : 12.76" (324 mm) Efficiency Beta 75: 3 Micron P PALL HC9600FUP16H, DONALDSON HPK04 ASSY : 3.10" (79 mm) ID: 1.68" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 3 Micron P PALL HC9400FUP13H : 3.75" (95 mm) ID: 2.21" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 3 Micron P PALL HC9650FUP8H : 3.10" (79 mm) ID: 1.68" (43 mm) : 8.03" (204 mm) Efficiency Beta 75: 3 Micron P PALL HC9650FUP16H : 3.10" (79 mm) ID: 1.68" (43 mm) : 16.67" (423 mm) Efficiency Beta 75: 3 Micron P PALL HC8400FUP8H : 6.02" (153 mm) ID: 3.28" (83 mm) : 8.13" (207 mm) Efficiency Beta 75: 3 Micron P PALL HC8400FUP16H : 6.02" (153 mm) ID: 3.28" (83 mm) : 16.77" (426 mm) Efficiency Beta 75: 3 Micron P SCHROEDER JS-1 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 3 Micron P SCHROEDER JS-3 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 3 Micron P PALL HC9800FUP4H : 1.97" (50 mm) ID: 0.94" (24 mm) : 4.45" (113 mm) P PALL HC9800FUN4H : 1.99" (51 mm) ID: 0.96" (24 mm) : 4.31" (109 mm) Efficiency Beta 75: 5 Micron P PALL HC9800FUS4H : 1.97" (50 mm) ID: 0.96" (24 mm) : 4.31" (109 mm) P PALL HC9800FUP8H : 1.99" (51 mm) ID: 0.96" (24 mm) : 7.94" (202 mm) Efficiency Beta 75: 3 Micron P PALL HC9800FUS8H : 1.99" (51 mm) ID: 0.96" (24 mm) : 7.94" (202 mm) Efficiency Beta 75: 10 Micron P PALL HC9800FUT8H : 1.99" (51 mm) ID: 0.96" (24 mm) : 7.94" (202 mm) Efficiency Beta 75: 22 Micron P PALL HC9800FUN13H : 1.99" (51 mm) ID: 0.96" (24 mm) : 12.93" (328 mm) Efficiency Beta 75: 5 Micron P PALL HC9800FUS13H : 1.99" (51 mm) ID: 0.94" (24 mm) : 12.91" (328 mm) P SCHROEDER A-25 : 3.00" (76 mm) ID: 1.04" (26 mm) : 4.75" (121 mm) Efficiency Beta 2: 25 Micron Page 92

95 P SCHROEDER J-25 : 3.53" (90 mm) ID: 1.61" (41 mm) : 9.02" (229 mm) Efficiency Beta 2: 25 Micron P PARKER , : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 2: 25 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 75: 17 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 18.31" (465 mm) Efficiency Beta 75: 25 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 18.31" (465 mm) Efficiency Beta 75: 5 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 18.31" (465 mm) Efficiency Beta 75: 10 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 75: 25 Micron P PALL HC9800FUT4H : 1.99" (51 mm) ID: 0.96" (24 mm) : 4.31" (109 mm) Efficiency Beta 75: 22 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 75: 5 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 75: 10 Micron P PARKER , : 3.68" (93 mm) ID: 1.75" (44 mm) : 18.31" (465 mm) Efficiency Beta 2: 25 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 18.31" (465 mm) Efficiency Beta 75: 17 Micron P PALL HC9800FUN8H : 1.99" (51 mm) ID: 0.96" (24 mm) : 7.94" (202 mm) Efficiency Beta 75: 5 Micron P PARKER , : 5.62" (143 mm) ID: 3.72" (95 mm) : 12.00" (305 mm) Efficiency Beta 75: 10 Micron P PARKER : 5.62" (143 mm) ID: 3.72" (95 mm) : 12.00" (305 mm) Efficiency Beta 75: 5 Micron P PARKER : 5.62" (143 mm) ID: 3.72" (95 mm) : 12.00" (305 mm) Efficiency Beta 75: 22 Micron P PARKER : 2.44" (62 mm) ID: 1.02" (26 mm) : 5.00" (127 mm) Efficiency Beta 75: 40 Micron Page 93

96 P PARKER : 2.44" (62 mm) ID: 1.02" (26 mm) : 5.00" (127 mm) Efficiency Beta 75: 22 Micron P PARKER , : 2.44" (62 mm) ID: 1.02" (26 mm) : 5.00" (127 mm) Efficiency Beta 75: 10 Micron P PARKER : 2.44" (62 mm) ID: 1.02" (26 mm) : 5.00" (127 mm) Efficiency Beta 75: 5 Micron P PARKER : 2.44" (62 mm) ID: 1.02" (26 mm) : 9.25" (235 mm) Efficiency Beta 75: 22 Micron P PARKER , : 2.44" (62 mm) ID: 1.02" (26 mm) : 9.25" (235 mm) Efficiency Beta 75: 10 Micron P PARKER : 2.44" (62 mm) ID: 1.02" (26 mm) : 9.25" (235 mm) Efficiency Beta 75: 5 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 16 Micron P PARKER , : 4.42" (112 mm) ID: 1.66" (42 mm) : 9.00" (229 mm) Efficiency Beta 75: 10 Micron P PARKER : 4.42" (112 mm) ID: 1.66" (42 mm) : 9.00" (229 mm) Efficiency Beta 75: 22 Micron P PARKER : 4.42" (112 mm) ID: 1.66" (42 mm) : 9.00" (229 mm) Efficiency Beta 75: 40 Micron P PARKER : 3.60" (91 mm) ID: 1.91" (49 mm) : 7.40" (188 mm) Efficiency Beta 75: 40 Micron P PARKER : 3.60" (91 mm) ID: 1.91" (49 mm) : 7.40" (188 mm) Efficiency Beta 75: 22 Micron P PARKER , : 3.60" (91 mm) ID: 1.91" (49 mm) : 7.40" (188 mm) Efficiency Beta 75: 10 Micron P PARKER : 3.60" (91 mm) ID: 1.91" (49 mm) : 7.40" (188 mm) Efficiency Beta 75: 5 Micron P HILCO PL : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Efficiency Beta 75: 5 Micron P HILCO PL , PL : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Efficiency Beta 75: 22 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 5.52" (140 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 3 Micron Page 94

97 P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 5.52" (140 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 5.52" (140 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 5.52" (140 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSEMBLY : 3.13" (80 mm) Thread Size: 2-12 : 5.52" (140 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 16 Micron P PALL HC8800FDN16H : 3.39" (86 mm) ID: 1.96" (50 mm) : 16.67" (423 mm) Efficiency Beta 75: 5 Micron P HYDRAULIC SPIN-ON, DURAMAX HMK05/25 ELEMENT, 14.24'' LONG, # 20 MEDIA : 4.77" (121 mm) Thread Size: 1 3/4-12 : 14.24" (362 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) P HYCON 0060D003BHHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) Efficiency Beta 75: 3 Micron P HYCON 0060D010BHHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) Efficiency Beta 75: 10 Micron P HYCON 0110D003BHHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 6.06" (154 mm) Efficiency Beta 75: 3 Micron P HYCON 0110D010BHHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 6.06" (154 mm) Efficiency Beta 75: 10 Micron P HYCON 0160D003BHHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 4.53" (115 mm) Efficiency Beta 75: 3 Micron P HYCON 0160D010BHHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 4.53" (115 mm) Efficiency Beta 75: 10 Micron Page 95

98 P HYCON 0240D003BHHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 6.85" (174 mm) Efficiency Beta 75: 3 Micron P HYCON 0240D010BHHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 6.85" (174 mm) Efficiency Beta 75: 10 Micron P HYCON 0060D005BNHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) Efficiency Beta 75: 5 Micron P HYCON 0060D010BNHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) Efficiency Beta 75: 10 Micron P HYCON 0330D003BHHC : 3.56" (90 mm) ID: 1.89" (48 mm) : 6.42" (163 mm) Efficiency Beta 75: 3 Micron P HYCON 0110D005BNHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 6.02" (153 mm) Efficiency Beta 75: 5 Micron P HYCON 0330D010BHHC : 3.56" (90 mm) ID: 1.89" (48 mm) : 6.42" (163 mm) Efficiency Beta 75: 10 Micron P HYCON 0110D010BNHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 6.02" (153 mm) Efficiency Beta 75: 10 Micron P HYCON 0660D003BHHC : 3.56" (90 mm) ID: 1.89" (48 mm) : 12.95" (329 mm) Efficiency Beta 75: 3 Micron P HYCON 0160D005BNHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 4.53" (115 mm) Efficiency Beta 75: 5 Micron P HYCON 0660D010BHHC : 3.56" (90 mm) ID: 1.89" (48 mm) : 12.95" (329 mm) Efficiency Beta 75: 10 Micron P HYCON 0160D010BNHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 4.53" (115 mm) Efficiency Beta 75: 10 Micron P HYCON 0030D005BNHC : 1.38" (35 mm) ID: 0.48" (12 mm) : 3.70" (94 mm) Efficiency Beta 75: 5 Micron P HYCON 0240D005BNHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 6.85" (174 mm) Efficiency Beta 75: 5 Micron P HYCON 0030D010BN : 1.38" (35 mm) ID: 0.48" (12 mm) : 3.70" (94 mm) Efficiency Beta 75: 10 Micron P HYCON 0240D010BNHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 6.85" (174 mm) Efficiency Beta 75: 10 Micron Page 96

99 P HYCON 0330D005BNHC : 3.56" (90 mm) ID: 1.90" (48 mm) : 6.42" (163 mm) Efficiency Beta 75: 5 Micron P HYCON 0330D010BNHC : 3.56" (90 mm) ID: 1.90" (48 mm) : 6.42" (163 mm) Efficiency Beta 75: 10 Micron P HYCON 0660D005BNHC : 3.56" (90 mm) ID: 1.90" (48 mm) : 12.95" (329 mm) Efficiency Beta 75: 5 Micron P HYCON 0660D010BNHC : 3.56" (90 mm) ID: 1.90" (48 mm) : 12.95" (329 mm) Efficiency Beta 75: 10 Micron P HYCON 0060R010BNHC, STAUFF RE014G10B : 2.03" (52 mm) ID: 0.87" (22 mm) : 4.06" (103 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P HYCON 0110R010BNHC, STAUFF RE030G10B : 2.03" (52 mm) ID: 0.87" (22 mm) : 6.71" (170 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P HYCON 0160R010BNHC, STAUFF RE045G10B : 2.87" (73 mm) ID: 1.35" (34 mm) : 5.67" (144 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P HYCON 0240R010BNHC, STAUFF RE070G10B : 2.87" (73 mm) ID: 1.35" (34 mm) : 7.99" (203 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P HYCON 0330R010BNHC, STAUFF RE090G10B : 3.72" (94 mm) ID: 1.80" (46 mm) : 7.70" (195 mm) Relief Valve Setting: 44 PSI (3.03 Bar) Efficiency Beta 75: 10 Micron P HYCON 0660R010BNHC, STAUFF RE160G10B : 4.49" (114 mm) ID: 2.70" (69 mm) : 13.11" (333 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P HYCON 1300R010BNHC, STAUFF RE300G10B : 5.63" (143 mm) ID: 3.80" (97 mm) : 19.02" (483 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P ALLISON TRANS , PALL HC8200FDN8H : 3.09" (79 mm) ID: 1.52" (39 mm) : 8.03" (204 mm) Efficiency Beta 75: 5 Micron P HYCON 0950R005BNHC : 5.63" (143 mm) ID: 3.78" (96 mm) : 14.30" (363 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 5 Micron P HYCON 1300R003BNHC : 5.63" (143 mm) ID: 3.78" (96 mm) : 18.99" (482 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 3 Micron P HYCON 0660R003BNHC : 4.49" (114 mm) ID: 2.70" (69 mm) : 13.11" (333 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 3 Micron P HYCON 0160R005BNHC : 2.87" (73 mm) ID: 1.35" (34 mm) : 5.67" (144 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 5 Micron Page 97

100 P HYCON 1300R020BNHC : 5.63" (143 mm) ID: 3.78" (96 mm) : 18.99" (482 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 20 Micron P HYCON 0950R010BNHC : 5.63" (143 mm) ID: 3.80" (97 mm) : 14.29" (363 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 75: 10 Micron P PALL HC8310FKT39H, HC8300FDT39H : 6.00" (152 mm) ID: 4.12" (105 mm) : 35.68" (906 mm) Efficiency Beta 75: 22 Micron P PALL HC8310FKN39H, HC8300FDN39H : 6.00" (152 mm) ID: 4.12" (105 mm) : 35.68" (906 mm) Efficiency Beta 75: 5 Micron P GASKET, LIQUID FILTER L SHAPE CROSS SECTION SEAL P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HYD ASSY, DONALDSON HMK05 : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE IH C1, MAGNUM AG TRACTORS : 4.77" (121 mm) Thread Size: 1 3/4-12 : 14.24" (362 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC SPIN-ON, DURAMAX JOHN DEERE AH128449, 90 SERIES COMBINES : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 22 Micron P PALL HC9901FUT26H, HYCON H9901/26-010BH, HPK05 : 3.80" (97 mm) ID: 2.19" (56 mm) : 25.90" (658 mm) Efficiency Beta 75: 20 Micron P PALL HC8310FKS39H, HC8310FDS39H, HC8310FDS39Z : 6.00" (152 mm) ID: 4.12" (105 mm) : 35.68" (906 mm) Efficiency Beta 75: 16 Micron P PALL HC8310FKP39H, HC8300FDP39H : 6.00" (152 mm) ID: 4.12" (105 mm) : 35.68" (906 mm) Efficiency Beta 75: 3 Micron P PALL HC8310FKS16H, HC8300FDS16H : 6.00" (152 mm) ID: 4.12" (105 mm) : 13.83" (351 mm) Efficiency Beta 75: 10 Micron P PALL HC8310FKT16H, HC8300FDT16H : 6.00" (152 mm) ID: 4.12" (105 mm) : 13.83" (351 mm) Efficiency Beta 75: 22 Micron P PALL HC8310FKN16H, HC8300FDN16H : 6.00" (152 mm) ID: 4.12" (105 mm) : 13.83" (351 mm) Efficiency Beta 75: 5 Micron P PALL HC8310FKP16H, HC8300FDP16H : 6.00" (152 mm) ID: 4.12" (105 mm) : 13.83" (351 mm) Efficiency Beta 75: 3 Micron P GASKET, LIQUID FILTER SUPPLIED WITH P : 5.69" (144 mm) ID: 5.47" (139 mm) Cross Section: 0.13" (3 mm) Page 98

101 P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 2: 74 Micron P PARKER : 5.62" (143 mm) ID: 3.72" (95 mm) : 12.00" (305 mm) Efficiency Beta 2: 74 Micron P PARKER : 5.62" (143 mm) ID: 3.72" (95 mm) : 12.00" (305 mm) Efficiency Beta 2: 149 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05/HMK25 HYD ASSY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05/HMK25 HYD ASSY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 16 Micron P DONALDSON HEK11 HYD ASSBLY : 7.44" (189 mm) ID: 4.85" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 40 Micron P PARKER : 2.84" (72 mm) ID: 2.44" (62 mm) : 6.50" (165 mm) Efficiency Beta 2: 149 Micron P PARKER : 2.84" (72 mm) ID: 2.44" (62 mm) : 6.50" (165 mm) Efficiency Beta 2: 149 Micron P PARKER : 2.73" (69 mm) ID: 1.68" (43 mm) : 8.69" (221 mm) Efficiency Beta 2: 74 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05/HMK25 HYD ASSY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05/HMK25 HYD ASSY : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX KAWASAKI WHL LDR 65 & 115, : 3.81" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 22 Micron P SCHROEDER C3, CS3, D3 : 2.69" (68 mm) ID: 1.01" (26 mm) : 4.56" (116 mm) Efficiency Beta 75: 5 Micron P SCHROEDER C10, D10, CS7 : 2.69" (68 mm) ID: 1.01" (26 mm) : 4.56" (116 mm) Efficiency Beta 75: 10 Micron P SCHROEDER C25, D25 : 2.69" (68 mm) ID: 1.01" (26 mm) : 4.56" (116 mm) Efficiency Beta 75: 22 Micron P SCHROEDER CC3, DD3, CCS3 : 2.69" (68 mm) ID: 1.01" (26 mm) : 9.31" (236 mm) Efficiency Beta 75: 5 Micron Page 99

102 P SCHROEDER CC10, DD10, CCS7 : 2.69" (68 mm) ID: 1.01" (26 mm) : 9.31" (236 mm) Efficiency Beta 75: 10 Micron P SCHROEDER CC25, DD25 : 2.69" (68 mm) ID: 1.01" (26 mm) : 9.31" (236 mm) Efficiency Beta 75: 22 Micron P PARKER , : 3.60" (91 mm) ID: 1.91" (49 mm) : 15.30" (389 mm) Efficiency Beta 75: 10 Micron P PARKER : 3.60" (91 mm) ID: 1.91" (49 mm) : 15.30" (389 mm) Efficiency Beta 75: 5 Micron P HARNISCHEFFGER 45Z459 : 4.39" (112 mm) ID: 2.22" (56 mm) : 14.47" (368 mm) Efficiency Beta 75: 35 Micron P : 2.05" (52 mm) ID: 1.02" (26 mm) : 2.64" (67 mm) P LHA TIE08BTA10 : 2.05" (52 mm) ID: 1.02" (26 mm) : 2.64" (67 mm) Efficiency Beta 75: 10 Micron P F.B.O. CRC003 : 2.05" (52 mm) ID: 1.00" (25 mm) : 2.59" (66 mm) P FBO CR30/1, DONALDSON FHK/FSK : 2.05" (52 mm) ID: 1.00" (25 mm) : 2.64" (67 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P FBO CR30/3, DONALDSON FHK/FSK : 2.05" (52 mm) ID: 1.00" (25 mm) : 2.64" (67 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P UFI : 2.05" (52 mm) ID: 1.00" (25 mm) : 2.60" (66 mm) Efficiency Beta 2: 60 Micron P : 2.20" (56 mm) ID: 0.87" (22 mm) : 2.91" (74 mm) P : 1.91" (49 mm) ID: 0.87" (22 mm) : 2.91" (74 mm) P SAUER SUNDSTRAND : 2.24" (57 mm) ID: 0.87" (22 mm) : 2.91" (74 mm) P : 1.91" (49 mm) ID: 1.00" (25 mm) : 2.91" (74 mm) Efficiency Beta 2: 60 Micron P : 1.91" (49 mm) ID: 0.87" (22 mm) : 3.74" (95 mm) P : 1.91" (49 mm) ID: 0.87" (22 mm) : 3.74" (95 mm) P LOESING : 2.24" (57 mm) ID: 0.87" (22 mm) : 3.74" (95 mm) P : 2.24" (57 mm) ID: 0.87" (22 mm) : 3.74" (95 mm) P : 2.76" (70 mm) ID: 1.15" (29 mm) : 2.95" (75 mm) Efficiency Beta 2: 90 Micron Page 100

103 P F.B.O. CR5002 : 2.76" (70 mm) ID: 1.18" (30 mm) : 2.95" (29 mm) Efficiency Beta 75: 10 Micron P HITACHI : 2.76" (70 mm) ID: 1.18" (30 mm) : 2.95" (75 mm) Efficiency Beta 2: 10 Micron P KOMATSU : 2.76" (70 mm) ID: 1.14" (29 mm) : 2.95" (75 mm) Efficiency Beta 2: 30 Micron P SAUER SUNDSTRAND : 2.76" (70 mm) ID: 1.14" (29 mm) : 2.95" (75 mm) P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 3.23" (82 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 90 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 3.23" (82 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 3.23" (82 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK/FSK ASSY, FBO CR60/1 : 2.76" (70 mm) ID: 1.14" (29 mm) : 3.23" (82 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK/FSK ASSY, FBO CR60/3 : 2.76" (70 mm) ID: 1.14" (29 mm) : 3.23" (82 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 3.23" (82 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 60 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 90 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK/FSK ASSY, FBO CR100/1 : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FHK/FSK ASSY : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 60 Micron P DONALDSON FHK ASSY : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 90 Micron P DONALDSON FHK ASSY : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron Page 101

104 Page 102 P DONALDSON FHK ASSY : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK ASSY, FBO CR180/1 : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK ASSY, FBO CR180/3 : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FHK ASSY : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 60 Micron P CR 201 : 3.74" (95 mm) ID: 1.61" (41 mm) : 9.84" (250 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 9.84" (250 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 9.84" (250 mm) P VAN HOOL : 3.74" (95 mm) ID: 1.61" (41 mm) : 9.84" (250 mm) Efficiency Beta 2: 10 Micron P FBO CR201/3 : 3.74" (95 mm) ID: 1.61" (41 mm) : 9.84" (250 mm) Efficiency Beta 2: 30 Micron P : 3.74" (95 mm) ID: 1.61" (41 mm) : 9.84" (250 mm) P : 5.51" (140 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) P F.B.O. CR25002 : 5.51" (140 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P CR 250/03 : 5.51" (140 mm) ID: 2.04" (52 mm) : 5.39" (137 mm) P FBO CR250/1 : 5.51" (140 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 10 Micron P FBO CR250/3 : 5.51" (140 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P F.B.O. CR2506 : 5.51" (140 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.05" (52 mm) : 7.99" (203 mm) P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.05" (52 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.05" (52 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FIK ASSY, FBO CR325/1 : 5.51" (140 mm) ID: 2.05" (52 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron

105 P DONALDSON FIK ASSY, FBO CR325/3 : 5.51" (140 mm) ID: 2.05" (52 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.05" (52 mm) : 7.99" (203 mm) P DONALDSON FHK, FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 90 Micron P DONALDSON FHK, FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FHK, FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK, FIK ASSY, FBO CR330/1 : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK, FIK ASSY, FBO CR330/3 : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FHK, FIK ASSY, INTANK RETURN ASSY'S : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 60 Micron P DONALDSON FHK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Efficiency Beta 2: 90 Micron P DONALDSON FHK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FHK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FHK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 20 Micron P DONALDSON FHK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 90 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FIK ASSY, FBO CR600/1 : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron Page 103

106 P DONALDSON FIK ASSY, FBO CR600/3 : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 16.02" (407 mm) P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.58" (66 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.58" (66 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FIK ASSY, FBO CR800/1 : 5.51" (140 mm) ID: 2.58" (66 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FIK ASSY, FBO CR800/3 : 5.51" (140 mm) ID: 2.56" (65 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P DONALDSON FIK ASSY : 5.51" (140 mm) ID: 2.56" (65 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 60 Micron P F.B.O. CR12502 : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.66" (169 mm) Efficiency Beta 75: 10 Micron P F.B.O. CR1251 : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.65" (169 mm) Efficiency Beta 2: 10 Micron P PUROLATOR LI2692 : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.65" (169 mm) Efficiency Beta 2: 30 Micron P : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.65" (169 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 5.35" (136 mm) P PUROLATOR LI2692 : 5.51" (140 mm) ID: 2.55" (65 mm) : 5.35" (136 mm) Efficiency Beta 75: 10 Micron P : 5.51" (140 mm) ID: 2.55" (65 mm) : 5.35" (136 mm) Efficiency Beta 75: 10 Micron P : 5.51" (140 mm) ID: 2.56" (65 mm) : 5.35" (136 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 5.35" (136 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 15.75" (400 mm) P LOMBARDINI : 4.41" (112 mm) ID: 1.81" (46 mm) : 7.09" (180 mm) P : 4.41" (112 mm) ID: 1.81" (46 mm) : 7.09" (180 mm) P KOMATSU : 4.41" (112 mm) ID: 1.81" (46 mm) : 7.09" (180 mm) Page 104

107 P SAUER SUNDSTRAND : 4.41" (112 mm) ID: 1.81" (46 mm) : 7.08" (180 mm) P KOMATSU : 4.41" (112 mm) ID: 1.81" (46 mm) : 7.09" (180 mm) P HYDRAULIC SPIN-ON UCC MXR8550 : 3.78" (96 mm) Thread Size: G 3/4 : 5.83" (149 mm) P HYDRAULIC SPIN-ON DONALDSON Europe FBK05 Series : 4.96" (126 mm) Thread Size: G 1 1/4 : 7.05" (179 mm) P HYDRAULIC SPIN-ON : 4.96" (126 mm) Thread Size: G 1 1/4 : 7.13" (181 mm) P HYDRAULIC SPIN-ON SPIN ON ELEMENT FOR FBK05 : 4.96" (126 mm) Thread Size: 1 1/4 : 7.04" (179 mm) P HYDRAULIC SPIN-ON EPPENSTEINER 7SL45K25 : 3.78" (96 mm) Thread Size: G 3/4 : 5.86" (149 mm) P HYDRAULIC SPIN-ON EPPENSTEINER 7SL45P25 : 3.78" (96 mm) Thread Size: G 3/4 : 5.86" (149 mm) P HYDRAULIC SPIN-ON : 3.78" (96 mm) Thread Size: G 3/4 : 5.75" (146 mm) P HYDRAULIC SPIN-ON UFI : 3.78" (96 mm) Thread Size: 3/4-BSP : 8.22" (209 mm) P HYDRAULIC SPIN-ON UFI : 3.78" (96 mm) Thread Size: 3/4-BSP : 8.22" (209 mm) P HYDRAULIC SPIN-ON FIAT : 3.78" (96 mm) Thread Size: 3/4-BSP : 8.22" (209 mm) P HYDRAULIC SPIN-ON : 3.78" (96 mm) Thread Size: G 3/4 : 8.23" (209 mm) P HYDRAULIC SPIN-ON : 3.78" (96 mm) Thread Size: G 3/4 : 8.23" (209 mm) P HYDRAULIC SPIN-ON : 4.96" (126 mm) Thread Size: G 1 1/4 : 7.13" (181 mm) P HYDRAULIC SPIN-ON : 4.96" (126 mm) Thread Size: G 1 1/4 : 9.29" (236 mm) P HYDRAULIC SPIN-ON : 4.96" (126 mm) Thread Size: G 1 1/4 : 9.29" (236 mm) P HYDRAULIC SPIN-ON DONALDSON ITALY FRCA/FACA SPIN-ON ASSY'S : 5.03" (128 mm) Thread Size: 1 1/4 : 9.29" (236 mm) Gasket : 4.25" (108 mm) Gasket ID: 3.86" (98 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON EPPENSTEINER 7SL130P25 : 4.96" (126 mm) Thread Size: 1 1/4-BSP : 9.25" (235 mm) P HYDRAULIC SPIN-ON : 4.96" (126 mm) Thread Size: G 1 1/4 : 9.29" (236 mm) P HYDRAULIC SPIN-ON TTE TANK TOP SPIN ON : 3.78" (96 mm) Thread Size: G 3/4 : 5.83" (148 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON CAR160/1 : 5.03" (128 mm) Thread Size: G 1 1/4 : 7.04" (179 mm) Relief Valve Setting: PSI (1.50 Bar) Page 105

108 P HYDRAULIC SPIN-ON TTE : 4.96" (126 mm) Thread Size: G 1 1/4 : 9.29" (236 mm) Gasket : 4.25" (108 mm) Gasket ID: 3.86" (98 mm) P : 2.05" (52 mm) ID: 1.02/1.14" (26/29 mm) : 2.76" (70 mm) P : 2.76" (70 mm) ID: 1.37" (35 mm) : 3.34" (89 mm) Efficiency Beta 2: 90 Micron P : 2.76" (70 mm) ID: 1.38" (35 mm) : 3.35" (85 mm) P C40/1 : 2.76" (70 mm) ID: 1.38" (35 mm) : 3.35" (85 mm) Efficiency Beta 75: 25 Micron P : 2.76" (70 mm) ID: 1.37" (35 mm) : 3.34" (85 mm) Efficiency Beta 2: 60 Micron P TECNO CORP TR1218 : 2.76" (70 mm) ID: 1.37" (35 mm) : 5.11" (130 mm) Efficiency Beta 2: 90 Micron P : 2.76" (70 mm) ID: 1.38" (35 mm) : 5.12" (130 mm) P FBO C100/1 : 2.76" (70 mm) ID: 1.38" (35 mm) : 5.12" (130 mm) Efficiency Beta 75: 25 Micron P TECNO COMP TR1217 : 2.76" (70 mm) ID: 1.37" (35 mm) : 5.11" (130 mm) Efficiency Beta 2: 60 Micron P : 3.90" (99 mm) ID: 2.04" (52 mm) : 8.27" (210 mm) P : 5.51" (140 mm) ID: 2.05" (52 mm) : 8.27" (210 mm) P C250/1 : 3.94" (100 mm) ID: 2.05" (52 mm) : 8.27" (210 mm) Efficiency Beta 75: 25 Micron P : 3.94" (100 mm) ID: 2.05" (52 mm) : 8.27" (210 mm) P C630/1 : 5.39" (137 mm) ID: 2.99" (76 mm) : 9.84" (250 mm) Efficiency Beta 75: 25 Micron P FBO C200/1 : 3.94" (100 mm) ID: 2.05" (52 mm) : 4.72" (120 mm) P MP PRUCTS HP037.1A06A, FBO CM140/01 : 1.69" (43 mm) ID: 0.89" (23 mm) : 3.54" (90 mm) Efficiency Beta 75: 5 Micron P MP PRUCTS HP037.1A10A, FBO CM140/02 : 1.69" (43 mm) ID: 0.89" (23 mm) : 3.54" (90 mm) Efficiency Beta 75: 10 Micron P MP PRUCTS HP037.1A25A, FBO CM180/03 : 1.69" (43 mm) ID: 0.89" (23 mm) : 3.54" (90 mm) Efficiency Beta 75: 25 Micron P : 1.73" (44 mm) ID: 0.09" (2 mm) : 3.54" (90 mm) Efficiency Beta 2: 10 Micron Page 106

109 P : 1.73" (44 mm) ID: 0.09" (2 mm) : 3.54" (90 mm) Efficiency Beta 2: 25 Micron P AGCO M1 : 1.73" (44 mm) ID: 0.87" (22 mm) : 3.54" (90 mm) P MP PRUCTS HP037.2A06A, FBO CM180/01 : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.93" (176 mm) P MP PRUCTS HP037.2A25A, FBO CM180/03 : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.93" (176 mm) P : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.93" (176 mm) P : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.93" (176 mm) P MP PRUCTS HP065.1A06NA, FBO CM230/01 : 1.81" (46 mm) ID: 1.02" (26 mm) : 3.43" (87 mm) Efficiency Beta 75: 5 Micron P MP PRUCTS HP065.1A10NA, FBO CM230/02 : 1.81" (46 mm) ID: 1.02" (26 mm) : 3.43" (87 mm) Efficiency Beta 75: 10 Micron P MP PRUCTS HP065.1A25NA, FBO CM230/03 : 1.81" (46 mm) ID: 1.02" (26 mm) : 3.43" (87 mm) Efficiency Beta 75: 25 Micron P : 1.77" (45 mm) ID: 1.02" (26 mm) : 3.42" (87 mm) Efficiency Beta 2: 10 Micron P : 1.81" (46 mm) ID: 1.02" (26 mm) : 4.50" (114 mm) Efficiency Beta 2: 10 Micron P : 1.81" (46 mm) ID: 1.02" (26 mm) : 4.45" (113 mm) P : 1.81" (46 mm) ID: 1.02" (26 mm) : 4.45" (113 mm) Efficiency Beta 2: 60 Micron P : 2.13" (54 mm) ID: 1.06" (27 mm) : 3.43" (87 mm) P LOESING : 2.13" (54 mm) ID: 1.06" (27 mm) : 3.43" (87 mm) P CASE : 2.13" (54 mm) ID: 1.06" (27 mm) : 3.43" (87 mm) P MP PRUCTS HP135.1A03NA, FBO : 2.13" (54 mm) ID: 1.08" (27 mm) : 4.80" (122 mm) Efficiency Beta 75: 3 Micron P MP PRUCTS HP135.1A10NA, FBO : 2.13" (54 mm) ID: 1.08" (27 mm) : 4.80" (122 mm) Efficiency Beta 75: 10 Micron P MP PRUCTS HP135.1A25NA, FBO : 2.13" (54 mm) ID: 1.08" (27 mm) : 4.80" (122 mm) Efficiency Beta 75: 25 Micron P MP PRUCTS HP135.2A03NA, FBO : 2.13" (54 mm) ID: 1.08" (27 mm) : 9.06" (230 mm) Efficiency Beta 75: 3 Micron Page 107

110 P MP PRUCTS HP135.2A10NA, FBO : 2.13" (54 mm) ID: 1.08" (27 mm) : 9.06" (226 mm) Efficiency Beta 75: 10 Micron P MP PRUCTS HP135.2A25NA, FBO : 2.13" (54 mm) ID: 1.08" (27 mm) : 9.06" (230 mm) Efficiency Beta 75: 25 Micron P : 3.07" (78 mm) ID: 1.57" (40 mm) : 5.51" (140 mm) P F.B.O : 3.07" (78 mm) ID: 1.66" (42 mm) : 5.51" (140 mm) P FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 5.51" (140 mm) Efficiency Beta 75: 25 Micron P MP PRUCTS HP320.2A03NA, FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 9.45" (240 mm) Efficiency Beta 75: 3 Micron P MP PRUCTS HP320.2A10NA, FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 9.45" (240 mm) Efficiency Beta 75: 10 Micron P MP PRUCTS HP320.2A25NA, FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 9.45" (240 mm) Efficiency Beta 75: 25 Micron P MP PRUCTS HP320.3A03NA, FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 14.96" (380 mm) Efficiency Beta 75: 3 Micron P MP PRUCTS HP320.3A10NA, FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 14.96" (380 mm) Efficiency Beta 75: 10 Micron P MP PRUCTS HP320.3A25NA, FBO : 3.07" (78 mm) ID: 1.59" (40 mm) : 14.96" (380 mm) Efficiency Beta 75: 25 Micron P : 0.83" (21 mm) ID: 0.39" (10 mm) : 1.85" (47 mm) P : 0.83" (21 mm) ID: 0.39" (10 mm) : 1.85" (47 mm) P : 0.83" (21 mm) ID: 0.39" (10 mm) : 1.85" (47 mm) P : 0.83" (21 mm) ID: 0.39" (10 mm) : 1.85" (47 mm) P : 0.83" (21 mm) ID: 0.39" (10 mm) : 1.85" (47 mm) P CLC 5/01 : 1.14" (29 mm) ID: 0.63" (16 mm) : 2.76" (70 mm) P FBO LC5/02 : 1.12" (28 mm) ID: 0.61" (15 mm) : 2.75" (70 mm) Efficiency Beta 75: 10 Micron P : 1.14" (29 mm) ID: 0.63" (16 mm) : 2.76" (70 mm) P : 1.14" (29 mm) ID: 0.63" (16 mm) : 2.76" (70 mm) P : 1.14" (29 mm) ID: 0.63" (16 mm) : 4.61" (117 mm) Page 108

111 P : 1.14" (29 mm) ID: 0.63" (16 mm) : 4.61" (117 mm) P : 1.14" (29 mm) ID: 0.63" (16 mm) : 4.61" (117 mm) P : 1.14" (29 mm) ID: 0.63" (16 mm) : 4.61" (117 mm) P LIEBHERR : 2.13" (54 mm) ID: 0.94" (24 mm) : 1.97" (50 mm) P LIEBHERR : 3.39" (86 mm) : 2.36" (60 mm) P SAUER SUNDSTRAND : 4.33" (110 mm) : 3.23" (82 mm) P : 4.33" (110 mm) ID: 2.95" (75 mm) : 3.23" (82 mm) P DONALDSON FRK ASSY, FAIREY ARLON ST3D120 : 2.82" (72 mm) ID: 0.31" (8 mm) : 7.87" (200 mm) P DONALDSON FRK ASSY, FAIREY ARLON ST260 : 2.82" (72 mm) ID: 1.77" (45 mm) : 4.17" (106 mm) Efficiency Beta 2: 60 Micron P DONALDSON FRK ASSY, FAIREY ARLON ST360 : 2.82" (72 mm) ID: 1.77" (45 mm) : 5.91" (150 mm) Efficiency Beta 2: 60 Micron P DONALDSON FRK ASSY, FAIREY ARLON ST3D60 : 2.82" (72 mm) ID: 0.31" (8 mm) : 7.87" (200 mm) P DONALDSON FRK ASSY, FAIREY ARLON ST3E60 : 2.82" (72 mm) ID: 0.31" (8 mm) : 11.81" (300 mm) P DONALDSON FRK ASSY, FAIREY ARLON ST460 : 4.17" (106 mm) ID: 0.39" (10 mm) : 7.48" (190 mm) P DONALDSON FRK ASSY, FAIREY ARLON ST560 : 4.17" (106 mm) ID: 0.39" (10 mm) : 10.24" (260 mm) P FAIREY ARLON TX210 : 2.82" (72 mm) ID: 0.31" (8 mm) : 4.17" (106 mm) P DONALDSON FRK ASSY, FAIREY ARLON TX310 : 2.82" (72 mm) ID: 1.77" (45 mm) : 5.91" (150 mm) Efficiency Beta 2: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TX3D10 : 2.82" (72 mm) ID: 1.77" (45 mm) : 7.87" (200 mm) Efficiency Beta 2: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TX3E10 : 2.82" (72 mm) ID: 0.31" (8 mm) : 11.81" (300 mm) P DONALDSON FRK ASSY, FAIREY ARLON TXX410 : 4.17" (106 mm) ID: 2.52" (64 mm) : 7.48" (190 mm) Efficiency Beta 2: 25 Micron Page 109

112 P DONALDSON FRK ASSY, FAIREY ARLON TXX510 : 4.17" (106 mm) ID: 2.52" (64 mm) : 10.24" (260 mm) Efficiency Beta 2: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXX5A10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 18.31" (465 mm) Efficiency Beta 2: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXX5A-10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 18.30" (465 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW2-CC25 : 2.82" (72 mm) ID: 0.31" (8 mm) : 4.17" (106 mm) P DONALDSON FRK ASSY, FAIREY ARLON MB2 : 2.82" (72 mm) ID: 1.77" (45 mm) : 4.17" (106 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW3-CC25 : 2.82" (72 mm) ID: 1.77" (45 mm) : 5.91" (150 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON MB3 : 2.82" (72 mm) ID: 1.77" (45 mm) : 5.91" (150 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON MB3D : 2.82" (72 mm) ID: 1.77" (45 mm) : 7.87" (200 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON MB3E : 2.82" (72 mm) ID: 1.77" (45 mm) : 11.81" (300 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXX4-10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 7.48" (190 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXX5-10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 10.24" (260 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW3D-CC25 : 2.82" (72 mm) ID: 1.77" (45 mm) : 7.87" (200 mm) Efficiency Beta 2: 9 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW3K-CC25 : 2.82" (72 mm) ID: 1.77" (45 mm) : 11.81" (300 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW4-CC25 : 4.17" (106 mm) ID: 2.52" (64 mm) : 7.48" (190 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW5-CC25 : 4.17" (106 mm) ID: 2.52" (64 mm) : 10.24" (260 mm) Efficiency Beta 75: 25 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW5A-CC25 : 4.17" (106 mm) ID: 0.39" (10 mm) : 18.31" (465 mm) Page 110

113 P DONALDSON FRK ASSY, FAIREY ARLON TXW2-CC10 : 2.82" (72 mm) ID: 1.77" (45 mm) : 4.17" (106 mm) Efficiency Beta 75: 10 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW3-CC10 : 2.82" (72 mm) ID: 1.77" (45 mm) : 5.91" (150 mm) Efficiency Beta 75: 10 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW3D-CC10 : 2.82" (72 mm) ID: 1.77" (45 mm) : 7.87" (200 mm) Efficiency Beta 75: 10 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW3E-CC10 : 2.82" (72 mm) ID: 1.77" (45 mm) : 11.81" (300 mm) Efficiency Beta 75: 10 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW4-CC10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 7.48" (190 mm) Efficiency Beta 75: 10 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW5-CC10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 10.24" (260 mm) Efficiency Beta 75: 10 Micron P DONALDSON FRK ASSY, FAIREY ARLON TXW5A-CC10 : 4.17" (106 mm) ID: 2.52" (64 mm) : 18.30" (465 mm) Efficiency Beta 75: 10 Micron P CR30 : 1.69" (43 mm) ID: 0.87" (22 mm) : 3.82" (97 mm) P CR40 : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.38" (162 mm) P DONALDSON FSK ASSY : 2.76" (70 mm) ID: 1.65" (42 mm) : 8.27" (210 mm) P : 1.69" (43 mm) ID: 0.87" (22 mm) : 3.82" (97 mm) P DONALDSON FSK ASSY : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.38" (162 mm) P FBO 150/6 : 2.76" (70 mm) ID: 1.57" (40 mm) : 8.27" (210 mm) Efficiency Beta 2: 60 Micron P DONALDSON FSK ASSY : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.38" (162 mm) P DONALDSON FSK ASSY : 2.76" (70 mm) ID: 1.57" (40 mm) : 8.27" (210 mm) Efficiency Beta 2: 20 Micron P : 1.69" (43 mm) ID: 0.87" (22 mm) : 3.82" (97 mm) P DONALDSON FSK ASSY : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.38" (162 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 25 Micron P DONALDSON FSK ASSY : 2.76" (70 mm) ID: 1.57" (40 mm) : 8.27" (210 mm) Efficiency Beta 75: 25 Micron P CR20/03 : 1.69" (43 mm) ID: 0.87" (22 mm) : 3.82" (97 mm) Page 111

114 P FSK04 INTANK SERIES : 2.76" (70 mm) ID: 8.27" (210 mm) : 1.65" (42 mm) Efficiency Beta 75: 25 Micron P : 1.69" (43 mm) ID: 0.87" (22 mm) : 3.82" (97 mm) P DONALDSON FSK ASSY : 1.69" (43 mm) ID: 0.87" (22 mm) : 6.38" (162 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 75: 10 Micron P DONALDSON FSK ASSY : 2.76" (70 mm) ID: 1.57" (40 mm) : 8.27" (210 mm) Efficiency Beta 75: 10 Micron P FILLER ASSY FILLER ASSY, PRESSURIZED : 2.76" (70 mm) ID: 2.50" (64 mm) : 7.09" (180 mm) P HYDRAULIC STRAINER : 2.05" (52 mm) Thread Size: G 3/8 : 3.03" (77 mm) P : 2.95" (75 mm) : 3.74" (95 mm) P : 2.95" (75 mm) : 3.74" (95 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 : 3.82" (97 mm) P : 3.74" (95 mm) ID: 1.73" (44 mm) : 3.82" (97 mm) P : 3.74" (95 mm) : 3.82" (97 mm) P HYDRAULIC STRAINER : 2.95" (75 mm) Thread Size: G 1 : 5.55" (141 mm) P : 2.95" (75 mm) : 5.55" (141 mm) P : 2.95" (75 mm) : 5.55" (141 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) : 7.24" (184 mm) P : 2.05" (52 mm) : 3.03" (77 mm) P HYDRAULIC STRAINER : 2.05" (52 mm) Thread Size: G 3/8 : 3.03" (77 mm) P HYDRAULIC STRAINER : 2.72" (69 mm) Thread Size: G 1/2 : 3.46" (88 mm) P : 2.72" (69 mm) : 3.46" (88 mm) P : 2.72" (69 mm) : 3.46" (88 mm) P HYDRAULIC STRAINER : 2.95" (75 mm) Thread Size: G 3/4 : 3.74" (95 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/4 : 7.24" (184 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/4 : 7.24" (184 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 1/2 : 4.45" (113 mm) P : 5.51" (140 mm) : 4.45" (113 mm) P : 5.51" (140 mm) : 4.45" (113 mm) Page 112

115 P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 2 : 6.02" (153 mm) P : 5.51" (140 mm) : 6.02" (153 mm) P : 5.51" (140 mm) : 6.02" (153 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 2 : 8.66" (220 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 2 : 8.66" (220 mm) P HYDRAULIC STRAINER MASSEY FERGUSON M1 : 5.51" (140 mm) Thread Size: G 2 : 8.66" (220 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 2 : 12.44" (316 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 2 : 12.44" (316 mm) P : 5.51" (140 mm) : 12.44" (316 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) Thread Size: G 2 1/2 : 12.48" (317 mm) P HYDRAULIC STRAINER FIOA 600/3 : 5.51" (140 mm) Thread Size: G 2 1/2 : 12.48" (317 mm) P HYDRAULIC STRAINER FIOA 600/6 : 5.51" (140 mm) Thread Size: G 2 1/2 : 12.48" (317 mm) P HYDRAULIC STRAINER : 5.51" (140 mm) : 5.51" (140 mm) Thread Size: G 3 : 12.48" (317 mm) P HYDRAULIC STRAINER FIOA 800/3 : 5.51" (140 mm) Thread Size: G 3 : 12.48" (317 mm) P : 5.51" (140 mm) ID: 2.48" (63 mm) : 12.48" (317 mm) P : 3.78" (96 mm) ID: 0.86" (22 mm) : 5.87" (149 mm) Radius: 7.83" (199 mm) P : 2.05" (52 mm) Thread Size: M18 x 1.5 ID: 1.77" (45 mm) Radius: 2.13" (54 mm) P (FS 7/4 : 2.83" (72 mm) Thread Size: G 1/2 ID: 2.52" (64 mm) Radius: 2.91" (74 mm) P FIAT : 1.57" (40 mm) ID: 0.86" (22 mm) : 1.34" (34 mm) P172434, CYLINDRICAL FIK04 HYD. FILTER ASSY'S : 2.00" (51 mm) ID: 0.20" (6 mm) : 1.50" (38 mm) P : 1.57" (40 mm) ID: 0.86" (22 mm) : 1.34" (34 mm) P : 3.15" (80 mm) ID: 1.16" (30 mm) : 3.23" (82 mm) P : 3.15" (80 mm) ID: 1.16" (30 mm) : 5.04" (128 mm) P CR 95/03 : 3.15" (80 mm) ID: 1.16" (30 mm) : 5.04" (128 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/2 : 8.54" (217 mm) Page 113

116 P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/2 : 8.54" (217 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/2 : 8.54" (217 mm) P FAIREY ARLON TXX6A-10 : 4.96" (126 mm) ID: 3.62" (92 mm) : 8.31" (211 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON TXX6A-CC10 : 4.96" (126 mm) ID: 0.39" (10 mm) : 8.31" (211 mm) P FAIREY ARLON TXX6A-CC25 : 4.96" (126 mm) ID: 0.39" (10 mm) : 8.31" (211 mm) P FAIREY ARLON TXX8A-10 : 4.96" (126 mm) ID: 3.62" (92 mm) : 11.42" (290 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON TXW8C-CC10 : 4.96" (126 mm) ID: 0.39" (10 mm) : 18.90" (480 mm) Efficiency Beta 2: 2 Micron P FAIREY ARLON TXW8C-CC25 : 4.96" (126 mm) ID: 3.62" (92 mm) : 18.90" (480 mm) Efficiency Beta 75: 25 Micron P SAUER SUNDSTRAND : 2.20" (56 mm) ID: 1.27" (32 mm) : 7.00" (178 mm) Efficiency Beta 2: 5 Micron P SAUER SUNDSTRAND : 2.20" (56 mm) ID: 1.27" (32 mm) : 7.00" (178 mm) Efficiency Beta 2: 10 Micron P : 2.20" (56 mm) ID: 1.26" (32 mm) : 7.01" (178 mm) P FAIREY ARLON 270Z1FFA : 2.87" (73 mm) ID: 1.26" (32 mm) : 3.90" (99 mm) Efficiency Beta 75: 3 Micron P FAIREY ARLON TXX8A-CC10 : 4.96" (126 mm) ID: 3.62" (92 mm) : 11.42" (290 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON TXX8A-CC25 : 4.96" (126 mm) ID: 3.62" (92 mm) : 11.42" (290 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON TXX8C-10 : 4.96" (126 mm) ID: 3.62" (92 mm) : 18.90" (480 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON 270Z101A : 2.87" (73 mm) ID: 1.26" (32 mm) : 3.90" (99 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON 270Z105A : 2.87" (73 mm) ID: 1.26" (32 mm) : 3.90" (99 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON 270Z110A : 2.87" (73 mm) ID: 1.26" (32 mm) : 3.90" (99 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON 270Z2FFA : 2.87" (73 mm) ID: 1.26" (32 mm) : 9.13" (232 mm) Efficiency Beta 75: 3 Micron Page 114

117 P FAIREY ARLON 270L201A : 2.87" (73 mm) ID: 1.26" (32 mm) : 9.13" (232 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON 270L205A : 2.87" (73 mm) ID: 1.26" (32 mm) : 9.13" (232 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON 270L210A : 2.87" (73 mm) ID: 1.26" (32 mm) : 9.13" (232 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON 370L205A : 3.66" (93 mm) ID: 1.89" (48 mm) : 7.87" (200 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON 370L210A : 3.66" (93 mm) ID: 1.89" (48 mm) : 7.87" (200 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON 370Z3FFA : 3.66" (93 mm) ID: 1.89" (48 mm) : 12.60" (320 mm) Efficiency Beta 75: 3 Micron P FAIREY ARLON 370Z1FFA : 3.36" (85 mm) ID: 1.90" (48 mm) : 3.90" (99 mm) Efficiency Beta 75: 3 Micron P FAIREY ARLON 370L301A : 3.66" (93 mm) ID: 1.89" (48 mm) : 12.60" (320 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON 370L101A : 3.66" (93 mm) ID: 1.89" (48 mm) : 3.90" (99 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON 370L305A : 3.66" (93 mm) ID: 1.89" (48 mm) : 12.60" (320 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON 370L105A, 370Z122A : 3.66" (93 mm) ID: 1.89" (48 mm) : 3.90" (99 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON 370L310A : 3.66" (93 mm) ID: 1.89" (48 mm) : 12.60" (320 mm) Efficiency Beta 75: 25 Micron P FAIREY ARLON 370L110A : 3.66" (93 mm) ID: 1.89" (48 mm) : 3.90" (99 mm) Efficiency Beta 75: 25 Micron P EXMAN : 2.76" (70 mm) ID: 1.14" (29 mm) : 6.65" (169 mm) Efficiency Beta 2: 30 Micron P FAIREY ARLON 370Z2FFA : 3.66" (93 mm) ID: 1.89" (48 mm) : 7.87" (200 mm) Efficiency Beta 75: 3 Micron P FBO CR180/1 : 3.74" (95 mm) ID: 1.44" (37 mm) : 11.77" (299 mm) Efficiency Beta 2: 10 Micron P FAIREY ARLON 370L201A : 3.66" (93 mm) ID: 1.89" (48 mm) : 7.87" (200 mm) Efficiency Beta 75: 5 Micron P : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) P FAIREY ARLON TXX6A10 : 4.96" (126 mm) ID: 0.39" (10 mm) : 8.31" (211 mm) Page 115

118 P FAIREY ARLON TXX8A10 : 4.96" (126 mm) ID: 3.62" (92 mm) : 11.42" (290 mm) Efficiency Beta 2: 25 Micron P FAIREY ARLON ST8A60 : 4.96" (126 mm) ID: 0.39" (10 mm) : 11.42" (290 mm) P FAIREY ARLON ST8C120 : 4.96" (126 mm) ID: 3.62" (92 mm) : 18.90" (480 mm) Efficiency Beta 2: 90 Micron P FAIREY ARLON MB8C : 4.96" (126 mm) ID: 3.62" (92 mm) : 18.90" (480 mm) Efficiency Beta 2: 25 Micron P FAI : 3.94" (100 mm) ID: 2.32" (59 mm) : 7.01" (178 mm) Efficiency Beta 2: 30 Micron P HYDRAULIC SPIN-ON FBO CA160/1R : 5.03" (128 mm) Thread Size: 1 1/4 : 7.04" (179 mm) P TOYOTA : 5.08" (129 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) Efficiency Beta 2: 30 Micron P HYDRAULIC STRAINER : 2.95" (75 mm) Thread Size: G 1 : 6.69" (170 mm) P CASE : 5.51" (140 mm) ID: 2.56" (65 mm) : 10.12" (257 mm) P MASSEY FERGUSON M1 : 1.42" (36 mm) ID: 2.60" (65 mm) : 5.20" (132 mm) P O & K : 6.00" (152 mm) ID: 3.94" (100 mm) : 25.40" (645 mm) Efficiency Beta 75: 10 Micron P : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) P FIAT : 5.51" (140 mm) ID: 2.56" (65 mm) : 16.02" (407 mm) P CASE : 5.08" (129 mm) ID: 3.35" (85 mm) : 8.98" (228 mm) P CASE : 5.91" (150 mm) ID: 3.35" (85 mm) : 9.25" (235 mm) P ATLAS WEYHAUSEN : 4.96" (126 mm) ID: 3.62" (92 mm) : 15.35" (390 mm) P EUCLID : 4.96" (126 mm) ID: 3.62" (92 mm) : 15.35" (390 mm) Efficiency Beta 75: 25 Micron P FIN FILTER FFPA : 4.96" (126 mm) ID: 3.62" (92 mm) : 15.35" (390 mm) Efficiency Beta 2: 10 Micron P CRS430/6 : 4.96" (126 mm) ID: 0.39" (10 mm) : 15.35" (390 mm) P : 1.81" (46 mm) ID: 0.98" (25 mm) : 3.43" (87 mm) Page 116

119 P HYDRAULIC SPIN-ON, DURAMAX : 3.78" (96 mm) Thread Size: G 3/4 : 5.83" (148 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.48" (63 mm) P : 3.31" (84 mm) ID: 1.89" (48 mm) : 5.63" (143 mm) P HYDRAULIC SPIN-ON HYSTER : 3.81" (97 mm) Thread Size: 1 3/8-12 : 9.45" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) P EXMAN : 2.76" (70 mm) ID: 1.00" (25 mm) : 8.22" (209 mm) Efficiency Beta 2: 10 Micron P : 3.62" (92 mm) ID: 1.97" (50 mm) : 10.08" (256 mm) P : 1.38" (35 mm) ID:.72" (18 mm) : 4.13" (105 mm) P : 1.38" (35 mm) ID:.72" (18 mm) : 4.13" (105 mm) P HYDAC 0060R005BNHC : 2.03" (52 mm) ID: 0.94" (24 mm) : 4.06" (103 mm) Efficiency Beta 75: 5 Micron P HYDAC 0060R020BNHC : 2.03" (52 mm) ID: 0.87" (22 mm) : 4.06" (103 mm) Efficiency Beta 75: 20 Micron P : 2.05" (52 mm) ID: 0.94" (24 mm) : 6.73" (171 mm) P HYDAC 0110R005BNHC : 2.05" (52 mm) ID: 0.94" (24 mm) : 6.73" (171 mm) P HYDAC 0110R020BNHC : 2.03" (52 mm) ID: 0.87" (22 mm) : 6.73" (171 mm) Efficiency Beta 75: 20 Micron P HYDAC 0160R003BNHC : 2.89" (74 mm) ID: 1.35" (34 mm) : 5.67" (144 mm) Efficiency Beta 75: 3 Micron P HYDAC 0160R020BNHC : 2.89" (74 mm) ID: 1.35" (34 mm) : 5.67" (144 mm) Efficiency Beta 75: 20 Micron P HYDAC 0240R003BNHC : 2.89" (74 mm) ID: 1.35" (34 mm) : 8.00" (203 mm) Efficiency Beta 75: 3 Micron P HYDAC 0240R005BNHC : 2.89" (74 mm) ID: 1.35" (34 mm) : 7.99" (203 mm) Efficiency Beta 75: 5 Micron P HYDAC 0240R020BNHC : 2.89" (74 mm) ID: 1.35" (34 mm) : 7.99" (203 mm) Efficiency Beta 75: 20 Micron P HYDAC 0330R003BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 7.68" (195 mm) Efficiency Beta 75: 3 Micron P HYDAC 0330R005BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 7.68" (195 mm) Efficiency Beta 75: 5 Micron P HYDAC 0330R020BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 7.68" (195 mm) Efficiency Beta 75: 20 Micron Page 117

120 P HYDAC 0500R003BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 10.67" (276 mm) Efficiency Beta 75: 3 Micron P HYDAC 0500R005BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 10.87" (276 mm) Efficiency Beta 75: 5 Micron P HYDAC 0500R010BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 10.87" (276 mm) Efficiency Beta 75: 10 Micron P HYDAC 0500R020BNHC : 3.72" (95 mm) ID: 1.90" (48 mm) : 10.87" (276 mm) Efficiency Beta 75: 20 Micron P HYDAC 0660R005BNHC : 4.50" (114 mm) ID: 2.70" (69 mm) : 13.11" (333 mm) Efficiency Beta 75: 5 Micron P HYDAC 0660R020BNHC : 4.50" (114 mm) ID: 2.70" (69 mm) : 13.11" (333 mm) Efficiency Beta 75: 20 Micron P : 4.49" (114 mm) ID: 2.60" (66 mm) : 16.22" (412 mm) P HYDAC 0850R005BNHC : 4.50" (114 mm) ID: 2.70" (69 mm) : 16.22" (412 mm) Efficiency Beta 75: 5 Micron P HYDAC 0850R010BNHC : 4.50" (114 mm) ID: 2.70" (69 mm) : 16.22" (412 mm) Efficiency Beta 75: 10 Micron P HYDAC 0850R020BNHC : 4.50" (114 mm) ID: 2.70" (69 mm) : 16.22" (412 mm) Efficiency Beta 75: 20 Micron P HYDAC 0950R020BNHC : 5.65" (143 mm) ID: 3.80" (97 mm) : 14.29" (363 mm) Efficiency Beta 75: 20 Micron P : 5.67" (144 mm) ID: 3.78" (96 mm) : 19.02" (483 mm) P : 5.67" (144 mm) ID: 3.78" (96 mm) : 19.02" (483 mm) P HYDAC 0030D003BNHC : 1.38" (35 mm) ID: 0.48" (12 mm) : 3.70" (94 mm) Efficiency Beta 75: 3 Micron P : 1.38" (35 mm) ID: 0.47" (12 mm) : 3.70" (94 mm) P INTERNORMEN D10VG30 : 1.38" (35 mm) ID: 0.48" (12 mm) : 3.70" (94 mm) Efficiency Beta 75: 10 Micron P HYDAC 0030D020BNHC, LIEBHERR : 1.38" (35 mm) ID: 0.48" (12 mm) : 3.70" (94 mm) Efficiency Beta 75: 20 Micron P HYDAC 0060D003BNHC : 1.88" (48 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) P HYDAC 0060D020BNHC : 1.88" (48 mm) ID: 0.87" (22 mm) : 3.27" (83 mm) P HYDAC 0110D003BNHC : 1.88" (48 mm) ID: 0.87" (22 mm) : 6.02" (153 mm) Efficiency Beta 75: 3 Micron Page 118

121 P HYDAC/HYCON 0110D020BNHC : 1.88" (48 mm) ID: 0.87" (22 mm) : 6.02" (153 mm) Efficiency Beta 75: 25 Micron P HYDAC 0160D003BNHC : 2.75" (70 mm) ID: 1.35" (34 mm) : 4.53" (115 mm) Efficiency Beta 75: 3 Micron P HYDAC 0160D020BNHC : 2.75" (70 mm) ID: 1.35" (34 mm) : 4.53" (115 mm) Efficiency Beta 75: 20 Micron P HYDAC 0240D003BNHC : 2.75" (70 mm) ID: 1.35" (34 mm) : 6.81" (173 mm) Efficiency Beta 75: 3 Micron P LIEBHERR : 2.72" (69 mm) ID: 1.34" (34 mm) : 6.85" (174 mm) P HYDAC 0330D003BNHC : 3.57" (91 mm) ID: 1.90" (48 mm) : 6.38" (162 mm) Efficiency Beta 75: 3 Micron P HYDAC/HYCON 0660D003BNHC : 3.57" (91 mm) ID: 1.90" (48 mm) : 12.91" (328 mm) Efficiency Beta 75: 3 Micron P HYDAC 0660D020BNHC : 3.57" (91 mm) ID: 1.90" (48 mm) : 12.91" (328 mm) Efficiency Beta 75: 20 Micron P : 2.13" (54 mm) ID: 1.06" (27 mm) : 8.98" (228 mm) P HITACHI, , JOHN DEERE TH101885, TH111010, : 4.41" (112 mm) ID: 2.72" (69 mm) : 17.24" (438 mm) Efficiency Beta 2: 10 Micron P RENAULT V.I : 2.64" (67 mm) ID: 1.00" (25 mm) : 4.33" (110 mm) Efficiency Beta 2: 10 Micron P : 5.51" (140 mm) ID: 2.56" (65 mm) : 16.02" (407 mm) P EXMAN HO1914 : 5.91" (150 mm) ID: 3.74" (95 mm) : 17.71" (450 mm) Efficiency Beta 2: 10 Micron P HITACHI : 2.01" (51 mm) ID: 0.91" (23 mm) : 5.73" (146 mm) Efficiency Beta 2: 149 Micron P FILLER ASSY CAP P173330, CYLINDRICAL FSK03 INTANK HYD ASSY : 1.46" (37 mm) : 1.02" (26 mm) P CR600/02 : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) P : 7.87" (200 mm) ID: 4.02" (102 mm) : 30.87" (784 mm) P FILLER ASSY CAP FOR PRESSURIZED RESERVOIRS P HYDRAULIC STRAINER KOMATSU : 3.98" (101 mm) Thread Size: G 2 : 9.65" (245 mm) P : 5.51" (140 mm) ID: 3.34" (85 mm) : 9.84" (250 mm) Efficiency Beta 75: 10 Micron P CR220/3RF : 5.51" (140 mm) ID: 2.56" (65 mm) : 5.35" (136 mm) Page 119

122 P CR500/3RF : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P CR100/3RF : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.04" (128 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.65" (169 mm) P : 1.38" (35 mm) ID: 0.47" (12 mm) : 3.70" (94 mm) P : 1.38" (35 mm) ID: 0.47" (12 mm) : 3.70" (94 mm) P : 1.38" (35 mm) ID: 0.47" (12 mm) : 3.70" (94 mm) P : 1.81" (46 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) P : 1.81" (46 mm) ID: 0.87" (22 mm) : 3.31" (84 mm) P : 1.81" (46 mm) ID: 0.87" (22 mm) : 6.06" (154 mm) P : 2.72" (69 mm) ID: 1.34" (34 mm) : 4.53" (115 mm) P : 3.66" (93 mm) ID: 1.89" (48 mm) : 12.95" (329 mm) P : 3.54" (90 mm) ID: 1.89" (48 mm) : 12.95" (329 mm) P HYDRAULIC STRAINER : 3.66" (93 mm) Thread Size: G 1 : 6.77" (172 mm) P BAIK TRADING : 1.97" (50 mm) ID: 2.50" (64 mm) : 11.02" (280 mm) P AGCO H1 : 2.36" (60 mm) ID: 1.97" (50 mm) : 8.82" (224 mm) P LIEBHERR : 3.27" (83 mm) ID: 1.57" (40 mm) : 7.72" (196 mm) Efficiency Beta 2: 10 Micron P LIEBHERR : 5.98" (152 mm) ID: 3.54" (90 mm) : 32.68" (830 mm) Efficiency Beta 75: 25 Micron P LEIBHERR : 5.98" (152 mm) ID: 3.35" (85 mm) : 16.34" (415 mm) Efficiency Beta 75: 25 Micron P liebherr : 5.98" (152 mm) ID: 3.35" (85 mm) : 24.57" (624 mm) Efficiency Beta 75: 25 Micron P CATERPILLAR, DEMAG : 4.65" (118 mm) ID: 2.32" (59 mm) : 6.50" (165 mm) Efficiency Beta 2: 27 Micron P ARGO P : 2.32" (59 mm) ID: 1.04" (26 mm) : 7.87" (200 mm) Efficiency Beta 2: 10 Micron P ARGO P : 3.50" (89 mm) ID: 1.97" (50 mm) : 12.99" (330 mm) Efficiency Beta 2: 10 Micron Page 120

123 P ARGO P : 3.27" (83 mm) ID: 1.97" (50 mm) : 8.94" (227 mm) Efficiency Beta 2: 10 Micron P LIEBHERR : 3.94" (100 mm) ID: 2.48" (63 mm) : 18.27" (464 mm) Efficiency Beta 75: 25 Micron P LIEBHERR : 3.93" (100 mm) ID: 2.56" (65 mm) : 13.74" (349 mm) P HYDRAULIC SPIN-ON, DURAMAX JOHN DEERE RE38965 : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 16 Micron P COMMERCIAL FILTER : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Efficiency Beta 75: 16 Micron P VICKERS , : 4.00" (102 mm) ID: 2.90" (74 mm) : 6.25" (159 mm) Efficiency Beta 2: 149 Micron P VICKERS , : 4.00" (102 mm) ID: 2.90" (74 mm) : 6.25" (159 mm) Efficiency Beta 2: 30 Micron P VICKERS , : 4.00" (102 mm) ID: 2.90" (74 mm) : 6.25" (159 mm) Efficiency Beta 2: 74 Micron P VICKERS , : 5.50" (140 mm) ID: 4.03" (102 mm) : 8.63" (219 mm) Efficiency Beta 2: 149 Micron P PARKER , ROSAEN 10-S-20C : 2.75" (70 mm) ID: 1.69" (43 mm) : 2.25" (57 mm) Efficiency Beta 2: 20 Micron P DONALDSON HFK08 ASSEMBLY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 2: 44 Micron P PARKER , ROSAEN 10-S-10C : 2.75" (70 mm) ID: 1.69" (43 mm) : 2.25" (57 mm) Efficiency Beta 2: 10 Micron P KATO TRACKED CRANE : 3.10" (79 mm) ID: 1.69" (43 mm) : 4.21" (107 mm) P VICKERS , : 2.44" (62 mm) ID: 1.53" (39 mm) : 3.69" (94 mm) Efficiency Beta 75: 40 Micron P VICKERS , : 2.44" (62 mm) ID: 1.53" (39 mm) : 3.69" (94 mm) Efficiency Beta 2: 10 Micron P PARKER , ROSAEN 51/52 CF74W : 4.25" (108 mm) ID: 3.12" (79 mm) : 9.50" (241 mm) Efficiency Beta 2: 74 Micron P PARKER , ROSAEN 51/52 CF149W : 4.25" (108 mm) ID: 3.12" (79 mm) : 9.50" (241 mm) Efficiency Beta 2: 149 Micron Page 121

124 P PARKER , ROSAEN 51/52 RF20C : 4.25" (108 mm) ID: 3.12" (79 mm) : 9.50" (241 mm) Efficiency Beta 2: 20 Micron P PARKER : 4.25" (108 mm) ID: 3.12" (79 mm) : 9.50" (241 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE IH D : 4.77" (121 mm) Thread Size: 1 3/8-12 : 11.63" (295 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX Ag Chem Equipment : 3.13" (80 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC SPIN-ON, DURAMAX SAUER SUNDSTRAND : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 75: 11 Micron P HYDRAULIC SPIN-ON, DURAMAX SAUER SUNDSTRAND : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 6 Micron P HYDRAULIC SPIN-ON CLARK , : 3.82" (97 mm) Thread Size: 7/8-14 : 5.97" (152 mm) Relief Valve Setting: 50 PSI (3.45 Bar) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 2: 7 Micron P HYDRAULIC SPIN-ON, DURAMAX CLARK : 3.82" (97 mm) Thread Size: 7/8-14 : 3.93" (100 mm) Relief Valve Setting: 50 PSI (3.45 Bar) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 22 Micron P CATERPILLAR : 0.16" (4 mm) ID: 0.04" (1 mm) : 0.39" (10 mm) P HYCON 0660R010P : 4.49" (114 mm) ID: 2.68" (68 mm) : 13.09" (332 mm) Relief Valve Setting: 43 PSI (2.96 Bar) Efficiency Beta 2: 10 Micron P SCHROEDER KM150, JM150 : 3.53" (90 mm) ID: 1.62" (41 mm) : 9.02" (229 mm) Efficiency Beta 2: 149 Micron P SCHROEDER KM60, JM60 : 3.53" (90 mm) ID: 1.62" (41 mm) : 9.02" (229 mm) Efficiency Beta 2: 74 Micron P HYDRAULIC SPIN-ON, DURAMAX HMK05/25 ELEMENT, 14.24'' LG., 22 MICRON ABSOLUTE : 4.77" (121 mm) Thread Size: 1 3/4-12 : 14.24" (362 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) P HYDRAULIC STRAINER SEH-8-3/4-100-RV3 : 2.63" (67 mm) Thread Size: 3/4-14 : 3.55" (90 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH RV3 : 2.63" (67 mm) Thread Size: 1 NPT : 5.35" (136 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH /4-100-RV3 : 3.38" (86 mm) Thread Size: 1 1/4 NPT : 6.85" (174 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH /2-100-RV3 : 3.38" (86 mm) Thread Size: 1 1/2 NPT : 8.01" (203 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron Page 122

125 P HYDRAULIC STRAINER SEH /2-100-RV3 : 3.94" (100 mm) Thread Size: 1 1/2 NPT : 9.85" (250 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH RV3 : 3.94" (100 mm) Thread Size: 2 NPT : 9.85" (250 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P SCHROEDER KKS3 : 3.85" (98 mm) ID: 1.62" (41 mm) : 18.25" (464 mm) Efficiency Beta 75: 5 Micron P SCHROEDER KKKS3 : 3.85" (98 mm) ID: 1.62" (41 mm) : 27.81" (706 mm) Efficiency Beta 75: 5 Micron P HYDRAULIC STRAINER SEC /2-100-RV3 : 5.12" (130 mm) Thread Size: 2 1/2 NPT : 10.10" (257 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P SCHROEDER KKS7 : 3.85" (98 mm) ID: 1.62" (41 mm) : 18.25" (464 mm) Efficiency Beta 75: 10 Micron P HYDRAULIC STRAINER SEC RV3 : 5.12" (130 mm) Thread Size: 3 NPT : 11.78" (299 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P SCHROEDER KKKS7 : 3.85" (98 mm) ID: 1.62" (41 mm) : 27.81" (706 mm) Efficiency Beta 75: 10 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05, HMK25 SERIES : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 149 Micron P GASKET P SCHROEDER KK10 : 3.85" (98 mm) ID: 1.62" (41 mm) : 18.25" (464 mm) Efficiency Beta 75: 25 Micron P SCHROEDER KK25 : 3.85" (98 mm) ID: 1.62" (41 mm) : 18.25" (464 mm) Efficiency Beta 2: 20 Micron P SCHROEDER KKS1 : 3.85" (98 mm) ID: 1.62" (41 mm) : 18.25" (464 mm) Efficiency Beta 75: 3 Micron P SCHROEDER KKS15 : 3.85" (98 mm) ID: 1.62" (41 mm) : 18.25" (464 mm) Efficiency Beta 75: 22 Micron P SCHROEDER KKKS15 : 3.85" (98 mm) ID: 1.62" (41 mm) : 27.81" (706 mm) Efficiency Beta 75: 22 Micron P PTI PG-050-DH : 3.32" (84 mm) ID: 1.87" (47 mm) : 5.56" (141 mm) Efficiency Beta 75: 40 Micron P PTI PG-050-HH : 3.32" (84 mm) ID: 1.87" (47 mm) : 5.56" (141 mm) Efficiency Beta 75: 5 Micron Page 123

126 P PTI PG-050-JH, PG-050-CH : 3.32" (84 mm) ID: 1.87" (47 mm) : 5.56" (141 mm) Efficiency Beta 75: 22 Micron P PTI PG-080-DH : 3.32" (84 mm) ID: 1.87" (47 mm) : 10.12" (257 mm) Efficiency Beta 75: 40 Micron P PTI PG-120-JH, PG-120-CH : 3.32" (84 mm) ID: 1.87" (47 mm) : 14.62" (371 mm) Efficiency Beta 75: 22 Micron P PALL HC8900FKP13H, HC8900FKP13Z : 3.75" (95 mm) ID: 2.22" (56 mm) : 12.76" (324 mm) Efficiency Beta 75: 3 Micron P PTI PG-080-GH : 3.32" (84 mm) ID: 1.87" (47 mm) : 10.12" (257 mm) Efficiency Beta 75: 3 Micron P PALL HC8900FKP16H, HC8900FKP16Z : 3.75" (95 mm) ID: 2.22" (56 mm) : 16.68" (424 mm) Efficiency Beta 75: 3 Micron P PTI PG-080-HH : 3.32" (84 mm) ID: 1.87" (47 mm) : 10.12" (257 mm) Efficiency Beta 75: 5 Micron P PALL HC8800FKN8H : 3.39" (86 mm) ID: 1.96" (50 mm) : 8.03" (204 mm) Efficiency Beta 75: 5 Micron P PTI PG-080-JH, PG-080-CH : 3.32" (84 mm) ID: 1.87" (47 mm) : 10.12" (257 mm) Efficiency Beta 75: 22 Micron P PALL HC8800FKP13H : 3.39" (86 mm) ID: 1.96" (50 mm) : 12.76" (324 mm) Efficiency Beta 75: 3 Micron P PTI PG-120-DH : 3.32" (84 mm) ID: 1.87" (47 mm) : 14.62" (371 mm) Efficiency Beta 75: 40 Micron P PALL HC8800FKS13H : 3.39" (86 mm) ID: 1.96" (50 mm) : 12.76" (324 mm) Efficiency Beta 75: 10 Micron P PTI PG-120-GH : 3.32" (84 mm) ID: 1.87" (47 mm) : 14.62" (371 mm) Efficiency Beta 75: 3 Micron P PALL HC8800FKT13H : 3.39" (86 mm) ID: 1.96" (50 mm) : 12.76" (324 mm) Efficiency Beta 75: 22 Micron P PTI PG-120-HH : 3.32" (84 mm) ID: 1.87" (47 mm) : 14.62" (371 mm) Efficiency Beta 75: 5 Micron P PALL HC8800FKP16H : 3.39" (86 mm) ID: 1.96" (50 mm) : 16.67" (423 mm) Efficiency Beta 75: 3 Micron Page 124

127 P PALL HC8800FKS16H : 3.39" (86 mm) ID: 1.96" (50 mm) : 16.67" (423 mm) Efficiency Beta 75: 10 Micron P PALL HC8800FKT16H : 3.39" (86 mm) ID: 1.96" (50 mm) : 16.67" (423 mm) Efficiency Beta 75: 22 Micron P PALL HC8200FKS16H : 3.50" (89 mm) ID: 1.53" (39 mm) : 16.68" (424 mm) Efficiency Beta 75: 10 Micron P PALL HC8200FKT16H : 3.50" (89 mm) ID: 1.53" (39 mm) : 16.68" (424 mm) Efficiency Beta 75: 22 Micron P PALL HC8200FKP8H : 3.38" (86 mm) ID: 1.53" (39 mm) : 8.03" (204 mm) Efficiency Beta 75: 3 Micron P PALL HC8200FKS8H : 3.38" (86 mm) ID: 1.53" (39 mm) : 8.03" (204 mm) Efficiency Beta 75: 10 Micron P HYDRAULIC SPIN-ON, DURAMAX NEW HOLLAND , JOHN DEERE M : 3.82" (97 mm) Thread Size: 1 3/8-12 : 7.88" (200 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.39" (61 mm) Efficiency Beta 75: 9 Micron P FAIREY ARLON TXW3-CC3 : 2.82" (72 mm) ID: 0.32" (8 mm) : 5.91" (150 mm) Efficiency Beta 75: 3 Micron P PALL HC8200FKN13H : 3.50" (89 mm) ID: 1.53" (39 mm) : 12.78" (325 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON TXW3D-CC3 : 2.82" (72 mm) ID: 0.32" (8 mm) : 7.87" (200 mm) Efficiency Beta 75: 3 Micron P PALL HC8200FKT13H : 3.50" (89 mm) ID: 1.53" (39 mm) : 12.78" (325 mm) Efficiency Beta 75: 22 Micron P FAIREY ARLON TXW3E-CC3 : 2.82" (72 mm) ID: 0.32" (8 mm) : 11.80" (300 mm) Efficiency Beta 75: 3 Micron P PALL HC8200FKP16H : 3.50" (89 mm) ID: 1.53" (39 mm) : 16.68" (424 mm) Efficiency Beta 75: 3 Micron P FAIREY ARLON TXW4-CC3 : 4.17" (106 mm) ID: 0.41" (10 mm) : 7.48" (190 mm) Efficiency Beta 75: 3 Micron P PALL HC8200FKN16H : 3.50" (89 mm) ID: 1.53" (39 mm) : 16.68" (424 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON TXW5-CC3 : 4.18" (106 mm) ID: 0.41" (10 mm) : 10.29" (261 mm) Efficiency Beta 75: 3 Micron Page 125

128 P FAIREY ARLON TXW5A-CC3 : 4.17" (106 mm) ID: 0.41" (10 mm) : 18.31" (465 mm) Efficiency Beta 75: 3 Micron P FAIREY ARLON TXW8A-CC3 : 4.96" (126 mm) ID: 0.41" (10 mm) : 11.42" (290 mm) Efficiency Beta 75: 3 Micron P FAIREY ARLON TXW8C-CC3 : 4.96" (126 mm) ID: 0.41" (10 mm) : 18.90" (480 mm) Efficiency Beta 75: 3 Micron P ZINGA RE : 3.94" (100 mm) ID: 1.95" (50 mm) : 9.11" (231 mm) Efficiency Beta 2: 10 Micron P ZINGA RE : 3.94" (100 mm) ID: 1.95" (50 mm) : 9.11" (231 mm) Efficiency Beta 2: 25 Micron P SCHROEDER KS1V : 3.85" (98 mm) ID: 1.62" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 3 Micron P SCHROEDER KS3V : 3.85" (98 mm) ID: 1.62" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 5 Micron P SCHROEDER KS7V : 3.85" (98 mm) ID: 1.62" (41 mm) : 9.02" (229 mm) Efficiency Beta 75: 16 Micron P HYDRAULIC SPIN-ON, DURAMAX CLARK : 3.71" (94 mm) Thread Size: 2-16 : 5.97" (152 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 7 Micron P PARKER : 3.68" (93 mm) ID: 1.75" (44 mm) : 9.00" (229 mm) Efficiency Beta 2: 44 Micron P PALL HC6400FKN8H : 3.39" (86 mm) ID: 1.74" (44 mm) : 8.06" (205 mm) Efficiency Beta 75: 5 Micron P PALL HC6400FKN13H : 3.39" (86 mm) ID: 1.74" (44 mm) : 12.86" (327 mm) Efficiency Beta 75: 5 Micron P PALL HC6400FKN16H : 3.39" (86 mm) ID: 1.74" (44 mm) : 16.86" (428 mm) Efficiency Beta 75: 5 Micron P PALL HC6400FKN26H : 3.39" (86 mm) ID: 1.74" (44 mm) : 25.66" (652 mm) Efficiency Beta 75: 5 Micron P PARKER , IL2 STYLE : 3.68" (93 mm) ID: 1.74" (44 mm) : 18.78" (477 mm) Efficiency Beta 75: 10 Micron P PARKER , IL2 STYLE HOUSING : 3.68" (93 mm) ID: 1.74" (44 mm) : 9.09" (231 mm) Efficiency Beta 75: 10 Micron Page 126

129 P GASKET, LIQUID FILTER OPTIONAL GASKET USED WITH P : 5.50" (140 mm) ID: 5.20" (132 mm) Cross Section: 0.13" (3 mm) P : 3.94" (100 mm) ID: 2.32" (59 mm) : 7.95" (202 mm) Efficiency Beta 2: 10 Micron P ARGO P : 1.81" (46 mm) ID: 0.80" (20 mm) : 4.05" (103 mm) Efficiency Beta 2: 25 Micron P ARGO P : 1.81" (46 mm) ID: 0.80" (20 mm) : 7.87" (200 mm) Efficiency Beta 2: 10 Micron P ARGO P : 2.36" (60 mm) ID: 1.12" (28 mm) : 7.91" (201 mm) Efficiency Beta 2: 25 Micron P ARGO P : 2.52" (64 mm) ID: 1.10" (28 mm) : 8.98" (228 mm) Efficiency Beta 2: 10 Micron P ARGO V : 2.52" (64 mm) ID: 1.16" (29 mm) : 9.09" (231 mm) P ARGO P : 3.27" (83 mm) ID: 1.69" (43 mm) : 7.67" (195 mm) Efficiency Beta 2: 10 Micron P ARGO V : 4.61" (117 mm) ID: 3.34" (85 mm) : 6.41" (163 mm) Efficiency Beta 75: 25 Micron P : 3.07" (78 mm) ID: 1.69" (43 mm) : 12.99" (330 mm) P HYDRAULIC STRAINER : 2.64" (67 mm) Thread Size: G 3/8 : 5.83" (148 mm) P FAL, JOHN DEERE AZ61599 : 2.76" (70 mm) ID: 1.10" (28 mm) : 5.75" (146 mm) P FAL, RENAULT VI : 2.72" (69 mm) ID: 1.50" (38 mm) : 5.71" (145 mm) P : 2.80" (71 mm) ID: 1.46" (37 mm) : 8.27" (210 mm) P HYDRAULIC INLINE FAL RENAULT : 2.71" (69 mm) Inlet Size: 1.53" (39 mm) Overall : 5.74" (146 mm) Outlet Size: 1.57" (40 mm) Efficiency Beta 2: 160 Micron P CR100/02 : 2.76" (70 mm) ID: 1.65" (42 mm) : 5.08" (129 mm) P : 2.76" (70 mm) ID: 1.65" (42 mm) : 5.08" (129 mm) P HYDRAULIC STRAINER FIOA 50/250 : 2.95" (75 mm) Thread Size: 3/4 NPT : 3.27" (83 mm) Overall : 3.74" (95 mm) P HYDRAULIC STRAINER FIOA 85/250 : 3.74" (95 mm) Thread Size: 1 NPT : 3.27" (83 mm) Overall : 3.74" (95 mm) P HYDRAULIC STRAINER FIOA 90/250 : 2.95" (75 mm) Thread Size: 1 NPT : 5.16" (131 mm) Overall : 5.55" (141 mm) Page 127

130 Page 128 P HYDRAULIC STRAINER FIOA 130/250 : 3.74" (95 mm) Thread Size: 1 1/4 NPT : 6.77" (172 mm) Overall : 10.98" (279 mm) P HYDRAULIC STRAINER DMIC, DSL-1500N : 3.74" (95 mm) Thread Size: G 1 : 7.99" (203 mm) P HYDRAULIC STRAINER FIOA 2" NPT : 5.51" (140 mm) Thread Size: 2 NPT : 8.07" (205 mm) Overall : 8.66" (220 mm) P HYDRAULIC STRAINER FIOA 175/250 : 3.39" (86 mm) Thread Size: 1 1/2 NPT : 5.12" (130 mm) Overall : 5.59" (142 mm) P HYDRAULIC STRAINER FIOA 600/250 : 5.51" (140 mm) Thread Size: 2 1/2 NPT : 11.85" (301 mm) Overall : 12.44" (316 mm) P HYDRAULIC STRAINER FIOA 3"NPT : 5.51" (140 mm) Thread Size: 3 NPT : 11.85" (301 mm) Overall : 12.48" (317 mm) P FIAT : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.65" (169 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) P od: 3.98" (101 mm) Thread Size: G2 : 9.92" (252 mm) P : 2.13" (54 mm) ID: 0.94" (24 mm) : 1.97" (50 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 6.65" (169 mm) P CATERPILLAR : 3.97" (101 mm) ID: 1.49" (38 mm) : 5.31" (135 mm) P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK03 ASSY'S : 3.11" (79 mm) Thread Size: 2-12 : 9.52" (242 mm) Gasket : 3.13" (80 mm) Gasket ID: 1.86" (47 mm) Efficiency Beta 75: 4 Micron P HILCO PL718 : 6.00" (152 mm) ID: 3.19" (81 mm) : 18.00" (457 mm) Efficiency Beta 75: 3 Micron P HILCO PL718 : 6.00" (152 mm) ID: 3.19" (81 mm) : 18.00" (457 mm) Efficiency Beta 75: 5 Micron P HILCO PL718 : 6.00" (152 mm) ID: 3.19" (81 mm) : 18.00" (457 mm) Efficiency Beta 75: 16 Micron P HILCO PL718 : 6.00" (152 mm) ID: 3.19" (81 mm) : 18.00" (457 mm) Efficiency Beta 75: 22 Micron P HYDRAULIC SPIN-ON, DURAMAX NEW HOLLAND : 4.77" (121 mm) Thread Size: 1 3/4-12 : 7.60" (193 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC SPIN-ON, DURAMAX CAT 9T-6636 : 4.77" (121 mm) Thread Size: 1 3/4-12 : 7.60" (193 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 16 Micron

131 P DONALDSON HAK05 ASSY : 4.39" (112 mm) ID: 2.44" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 10 Micron P DONALDSON HAK05, HDK06 ASSY : 4.39" (112 mm) ID: 2.44" (62 mm) : 16.00" (406 mm) Efficiency Beta 75: 10 Micron P DONALDSON HFK08 ASSY : 6.00" (152 mm) ID: 3.41" (87 mm) : 18.00" (457 mm) Efficiency Beta 75: 10 Micron P DONALDSON HEK11 ASSY : 7.44" (189 mm) ID: 4.86" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 10 Micron P HYDRAULIC SPIN-ON SULLAIR : 4.63" (118 mm) Thread Size: 1 1/4-BSP : 6.27" (159 mm) Gasket : 4.33" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency Beta 75: 25 Micron P HYDRAULIC SPIN-ON SULLAIR : 4.63" (118 mm) Thread Size: 1 1/4-BSP : 11.27" (286 mm) Gasket : 4.33" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency Beta 75: 25 Micron P DONALDSON HEK11 FILTER ASSY'S, # 2 MEDIA : 7.44" (189 mm) ID: 4.85" (123 mm) : 22" (559 mm) Efficiency Beta 75: 5 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSY'S : 3.82" (97 mm) Thread Size: 1 3/8-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK04 ASSY'S : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 4 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05, HMK25 ASSY'S : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 4 Micron P : 1.81" (46 mm) ID: 0.98" (25 mm) : 4.45" (113 mm) P : 3.07" (78 mm) ID: 1.69" (43 mm) : 8.19" (208 mm) P : 4.96" (126 mm) ID: 3.31" (84 mm) : 9.45" (240 mm) P : 2.13" (54 mm) ID: 1.08" (27 mm) : 4.80" (122 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 16.02" (407 mm) P HYDRAULIC SPIN-ON, DURAMAX FIAT : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.62" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 : 4.25" (108 mm) P : 3.86" (86 mm) ID: 1.22" (31 mm) : 7.01" (178 mm) P : 1.06" (27 mm) ID: 0.51" (13 mm) : 0.94" (24 mm) Page 129

132 P : 1.73" (44 mm) ID: 0.91" (23 mm) : 3.54" (90 mm) P : 1.91" (49 mm) ID:.87" (22 mm) : 4.09" (104 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 10.83" (275 mm) P : 5.91" (150 mm) ID: 3.52" (89 mm) : 23.98" (609 mm) P HITACHI : 5.51" (140 mm) ID: 2.56" (65 mm) : 15.75" (400 mm) P : 1.81" (46 mm) ID: 1.06" (27 mm) : 4.45" (113 mm) P HYDRAULIC STRAINER FAL : 2.91" (74 mm) ID: 0.71" (18 mm) : 3.94" (100 mm) Overall : 5.75" (146 mm) P HYDRAULIC STRAINER FAL : 3.15" (80 mm) ID: 2.01" (51 mm) : 7.01" (178 mm) P CLC1 : 0.41" (10 mm) ID: 0.32" (8 mm) : 0.87" (22 mm) P : 2.76" (70 mm) ID: 1.65" (42 mm) : 5.08" (129 mm) P AP472 : 1.97" (50 mm) ID: 0.94" (24 mm) : 4.45" (113 mm) P : 3.54" (90 mm) ID: 1.16" (29 mm) : 7.05" (179 mm) P HYCON 0110D020BNHC : 1.85" (47 mm) ID: 0.87" (22 mm) : 6.02" (153 mm) Efficiency Beta 75: 20 Micron P HYCON 0240D020BNHC : 2.72" (69 mm) ID: 1.34" (34 mm) : 6.81" (173 mm) Efficiency Beta 75: 20 Micron P HYCON 0330D020BNHC : 3.56" (90 mm) ID: 1.89" (48 mm) : 6.42" (163 mm) Efficiency Beta 75: 20 Micron P KIT Marathon Efficiency Beta 2: 2 Micron P HYDRAULIC SPIN-ON, DURAMAX JOHN DEERE T : 3.71" (94 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC STRAINER CASE : 3.98" (101 mm) Thread Size: G 2 : 9.92" (252 mm) P HYDRAULIC STRAINER KOMATSU : 2.95" (75 mm) Thread Size: G 1 : 7.09" (180 mm) P HYDRAULIC STRAINER : 2.87" (73 mm) Thread Size: G 1 : 9.06" (230 mm) P HYDRAULIC STRAINER CALABRESE EUROTEC : 4.45" (113 mm) Thread Size: G 2 : 7.91" (201 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/4 : 4.25" (108 mm) Page 130

133 P : 4.72" (120 mm) ID: 2.05" (52 mm) : 7.95" (202 mm) P : 3.74" (95 mm) ID: 3.74" (95 mm) : 7.99" (203 mm) P : 5.08" (129 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P CASE : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 8.27" (210 mm) P NEW HOLLAND : 2.76" (70 mm) ID: 1.14" (29 mm) : 6.65" (169 mm) P CASE : 9.21" (234 mm) ID: 6.69" (170 mm) : 13.19" (335 mm) P NEW HOLLAND : 4.41" (112 mm) ID: 1.42" (36 mm) : 7.32" (186 mm) P : 1.57" (40 mm) ID: 0.71" (18 mm) : 13.70" (348 mm) P HYDRAULIC SPIN-ON, DURAMAX JOHN DEERE RE55801 : 3.71" (94 mm) Thread Size: 1 3/8-12 : 4.47" (114 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 33 Micron P HILCO : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Gasket ID: 2.65" (67 mm) P HYDRAULIC SPIN-ON, DURAMAX HMK05/HMK25 SPIN-ON, WATER REMOVAL : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) P HYDRAULIC SPIN-ON DONALDSON LPS04 SPIN-ON : 3.66" (93 mm) Thread Size: 1-12 : 7.87" (200 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 2 Micron P HYDRAULIC SPIN-ON, DURAMAX CASE IH A1 : 3.82" (97 mm) Thread Size: 13/16-16 : 5.97" (152 mm) Relief Valve Setting: 50 PSI (3.45 Bar) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 75: 7 Micron P HYDRAULIC SPIN-ON, DURAMAX CATERPILLAR 6E6408, NEW HOLLAND : 4.77" (121 mm) Thread Size: 1 3/8-12 : 11.63" (295 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) P HYDRAULIC SPIN-ON, DURAMAX CAT , MELROE , N- HOLLAND : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) Efficiency Beta 75: 9 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05, HMK25 : 4.77" (121 mm) Thread Size: 1 3/4-12 : 12.64" (321 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) P181000, FINNED DONALDSON FWA14 OR FWG14 CYCLOPAC A/C : 11.09" (282 mm) ID: 6.73" (171 mm) : 12.00" (305 mm) Gasket ID: 9.56" (243 mm) Minor : 0.53" (13 mm) P181001, FINNED DONALDSON FWA16 OR FWG16 CYCLOPAC A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 14.00" (356 mm) Gasket ID: 10.12" (257 mm) Minor : 0.53" (13 mm) Page 131

134 P DONALDSON FHG16 CYCLOPAC A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 10.12" (257 mm) P DONALDSON EBA11 A/C, MACK, PACCAR : 8.84" (225 mm) ID: 5.48" (139 mm) : 22" (559 mm) Gasket : 7.76" (197 mm) Gasket ID: 7.00" (178 mm) P DONALDSON EBA15 A/C, COMBUSTION AIR MACK 57MD31 : 12.74" (324 mm) ID: 8.38" (213 mm) : 14.00" (356 mm) Gasket ID: 10.12" (257 mm) P DONALDSON EBA15 A/C, COOLING AIR MACK 57MD21 : 12.74" (324 mm) ID: 8.38" (213 mm) : 8.00" (203 mm) Gasket ID: 10.70" (272 mm) P DONALDSON EBA13 A/C, STANDARD : 10.40" (264 mm) ID: 6.04" (153 mm) : 21.82" (554 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBA15 AIR CLEANER : 12.74" (324 mm) ID: 8.38" (213 mm) : 22" (559 mm) Gasket ID: 10.12" (257 mm) P DONALDSON EBA15 A/C : 12.74" (324 mm) ID: 8.38" (213 mm) : 26.00" (660 mm) Gasket ID: 10.12" (257 mm) P GMC PACCAR W/DONALDSON FWG16 A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 14.00" (356 mm) Gasket : 9.76" (247 mm) Gasket ID: 9.00" (228 mm) Bolt Hole Diameter: 0.66" (17 mm) P DONALDSON EBA16 AIR CLEANER : 13.84" (352 mm) ID: 9.48" (241 mm) : 26.00" (660 mm) Gasket ID: 10.70" (272 mm) P DONALDSON EBA16 A/C-STANDARD, GMC : 13.83" (351 mm) ID: 9.49" (241 mm) : 19.00" (483 mm) Gasket ID: 10.70" (272 mm) P181013, FINNED FORD D0HZ9601F MOTORCRAFT F186 : 12.09" (307 mm) ID: 7.72" (196 mm) : 10.00" (254 mm) Gasket ID: 10.12" (257 mm) Minor : 0.66" (17 mm) P DONALDSON EBA13 A/C, FORD D5HZ9601D : 10.40" (264 mm) ID: 6.04" (153 mm) : 15.00" (381 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBB14 OR EGB14 A/C, IHC C1 : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Gasket ID: 9.70" (246 mm) P DONALDSON EBA13 A/C, WHITE, FREIGHTLINER : 10.40" (264 mm) ID: 6.04" (153 mm) : 26.00" (660 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBA11 A/C : 8.84" (225 mm) ID: 5.48" (139 mm) : 28.00" (711 mm) Gasket ID: 7.00" (178 mm) P DONALDSON EBB14 A/C, FORD D5HZ9601A : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBB12 A/C, IHC C1 : 10.40" (264 mm) ID: 6.04" (153 mm) : 11.90" (302 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBB12 A/C, GMC : 10.40" (264 mm) ID: 6.04" (153 mm) : 10.00" (254 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) Bolt Hole Diameter: 0.62" (16 mm) Page 132

135 P181023, FINNED FORD D0HZ9601A MOTORCRAFT FA573 : 11.09" (282 mm) ID: 6.73" (171 mm) : 16.00" (406 mm) Gasket ID: 9.56" (243 mm) Minor : 0.66" (17 mm) P181024, FINNED MOTORCRAFT FA560, CAT 2N1990 : 9.21" (234 mm) ID: 4.85" (123 mm) : 8.00" (203 mm) Gasket : 6.72" (171 mm) Gasket ID: 5.42" (138 mm) Minor : 0.66" (17 mm) P DONALDSON EBA15 A/C, MACK 57MD29301 : 12.74" (324 mm) ID: 8.38" (213 mm) : 14.00" (356 mm) P181035, FINNED DONALDSON FWA12 OR FWG12 CYCLOPAC A/C : 9.21" (234 mm) ID: 4.85" (123 mm) : 10.00" (254 mm) Gasket ID: 7.62" (194 mm) Minor : 0.53" (13 mm) P DONALDSON SBG16 DONACLONE, CAT 6L-3313 : 13.83" (351 mm) ID: 9.49" (241 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.53" (13 mm) P DONALDSON SBG14 DONACLONE : 12.09" (307 mm) ID: 7.73" (196 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.53" (13 mm) P DONALDSON EBB12 OR EGB12 A/C, IHC C1 : 10.40" (264 mm) ID: 6.04" (153 mm) : 16.00" (406 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBB14, 8.2L NAT& 8.2L TURBO, FORD, GM : 12.09" (307 mm) ID: 7.73" (196 mm) : 7.00" (178 mm) Gasket ID: 9.88" (251 mm) P DONALDSON SBG16 DONACLONE A/C : 13.83" (351 mm) ID: 9.49" (241 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.53" (13 mm) P DONALDSON SBG14 DONACLONE A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.53" (13 mm) P DONALDSON SBG12 DONACLONE : 10.40" (264 mm) ID: 6.96" (177 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.53" (13 mm) P DONALDSON FHG12 CYCLOPAC A/C : 9.21" (234 mm) ID: 4.85" (123 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.62" (194 mm) P DONALDSON SRG20/29 DONACLONE W/8" DIA. OUTLETS : 17.58" (447 mm) ID: 11.07" (281 mm) : 23.06" (586 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 14.00" (356 mm) P DONALDSON STG16 DONACLONE A/C : 13.83" (351 mm) ID: 9.49" (241 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 9.88" (251 mm) P DONALDSON SRG20/29 Donaclone w/10" DIA. Outlets : 17.58" (447 mm) ID: 12.22" (310 mm) : 23.03" (585 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 14.00" (356 mm) P DONALDSON STG14 DONACLONE A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P DONALDSON STG16 DONACLONE : 14.68" (373 mm) ID: 10.34" (263 mm) : 24.02" (610 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 11.00" (279 mm) P DONALDSON FVG14 CYCLOFLOW A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) Page 133

136 P DONALDSON STG12 DONACLONE A/C : 10.40" (264 mm) ID: 6.04" (153 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.38" (162 mm) P181045, FINNED DONALDSON FWA10 OR FWG10 CYCLOPAC A/C : 7.93" (201 mm) ID: 4.57" (116 mm) : 10.00" (254 mm) Gasket ID: 6.38" (162 mm) Minor : 0.53" (13 mm) P DONALDSON FHG14 CYCLOPAC A/C : 11.09" (282 mm) ID: 6.73" (171 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P DONALDSON FVG16 A/C, TEREX : 13.83" (351 mm) ID: 9.49" (241 mm) : 22.03" (560 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 9.88" (251 mm) P DONALDSON SRG20 A/C, TEREX : 17.58" (447 mm) ID: 12.22" (310 mm) : 19.03" (483 mm) Bolt Hole Diameter: 0.42" (11 mm) Gasket ID: 14.00" (356 mm) P DONALDSON FVG16 CYCLOFLOW A/C : 12.74" (324 mm) ID: 8.38" (213 mm) : 24.03" (610 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 9.88" (251 mm) P181050, FINNED DONALDSON FWA05 OR FWG05 CYCLOPAC : 4.08" (104 mm) ID: 2.49" (63 mm) : 10.00" (254 mm) Gasket ID: 2.58" (65 mm) Minor : 0.66" (17 mm) P181052, FINNED DONALDSON FWA06 OR FWG06 CYCLOPAC : 5.25" (133 mm) ID: 2.64" (67 mm) : 11.00" (279 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P181053, FINNED DONALDSON FWD16 CYCLOPAC, DETROIT DIESEL : 13.84" (352 mm) ID: 9.47" (241 mm) : 18.00" (457 mm) Gasket ID: 10.70" (272 mm) P181054, FINNED DONALDSON FWA08 OR FWG08 CYCLOPAC : 6.08" (154 mm) ID: 3.49" (89 mm) : 12.00" (305 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P DONALDSON FVG16 A/C, WHITE, FREIGHTLINER : 12.74" (324 mm) ID: 8.38" (213 mm) : 19.06" (484 mm) Gasket ID: 9.88" (251 mm) P DONALDSON EBB A/C, FRAM, IHC, WHITE : 12.09" (307 mm) ID: 7.72" (196 mm) : 15.19" (386 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P DONALDSON FWD16 OR FVG16, WHITE, FREIGHTLINER : 12.74" (324 mm) ID: 8.38" (213 mm) : 17.03" (433 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 9.88" (251 mm) P DONALDSON EBA16 A/C, PACCAR : 13.83" (351 mm) ID: 9.49" (241 mm) : 23.00" (584 mm) Gasket ID: 10.70" (272 mm) P181059, FINNED DONALDSON FHG08 CYCLOPAC A/C : 6.08" (154 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P181060, FINNED DONALDSON FWD16 A/C, WHITE, FREIGHTLINER : 13.84" (352 mm) ID: 7.48" (190 mm) : 12.00" (305 mm) P DONALDSON EBA16 A/C, GMC : 13.83" (351 mm) ID: 9.49" (241 mm) : 25.00" (635 mm) Gasket ID: 10.70" (272 mm) P181062, FINNED DONALDSON FHG06 CYCLOPAC A/C : 5.25" (133 mm) ID: 3.26" (83 mm) : 15.00" (381 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) Page 134

137 P181063, FINNED DONALDSON FHG09 CYCLOPAC A/C : 6.84" (174 mm) ID: 4.24" (108 mm) : 16.00" (406 mm) Gasket ID: 5.42" (138 mm) Minor : 0.66" (17 mm) P181064, FINNED DONALDSON FHG10 CYCLOPAC : 7.93" (201 mm) ID: 5.32" (135 mm) : 16.00" (406 mm) Gasket ID: 6.36" (162 mm) Minor : 0.66" (17 mm) P DONALDSON EAD16 A/C, CUMMINS : 13.84" (352 mm) ID: 7.48" (190 mm) : 18.02" (458 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) Outlet Diameter: 0.66" (17 mm) P181066, FINNED DONALDSON FWA16 A/C, PACCAR : 13.83" (351 mm) ID: 9.49" (241 mm) : 14.00" (356 mm) Gasket ID: 10.12" (257 mm) Minor : 0.66" (17 mm) P DONALDSON SBG08 DONACLONE A/C : 6.84" (174 mm) ID: 4.24" (108 mm) : 9.00" (229 mm) P DONALDSON FTG11 CYCLOPAC A/C : 9.14" (232 mm) ID: 5.78" (147 mm) : 18.00" (457 mm) Gasket : 7.00" (178 mm) Gasket ID: 6.25" (159 mm) Bolt Hole Diameter: 0.66" (17 mm) P DONALDSON SBG10 DONACLONE A/C : 8.40" (213 mm) ID: 5.79" (147 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.53" (13 mm) P181072, FINNED DONALDSON FHG05 CYCLOPAC A/C : 4.08" (104 mm) ID: 2.49" (63 mm) : 14.00" (356 mm) Gasket ID: 2.58" (65 mm) Minor : 0.66" (17 mm) P DONALDSON FTG15 CYCLOPAC A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 19.00" (483 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBA13 A/C, MACK 57MD29305 : 10.40" (264 mm) ID: 6.96" (177 mm) : 11.00" (279 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EAD16 A/C, FORD D5HZ9601B : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 10.12" (257 mm) P181077, FINNED DONALDSON FHG14 A/C, JOY, COLT : 11.09" (282 mm) ID: 6.73" (171 mm) : 15.00" (381 mm) Gasket ID: 9.56" (243 mm) Minor : 0.66" (17 mm) P DONALDSON FVG14 CYCLOFLOW A/C : 12.09" (307 mm) ID: 7.73" (196 mm) : 23.00" (584 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) Bolt Hole Diameter: 0.90" (23 mm) P181079, FINNED DONALDSON FHG16 A/C, JOY, COLT : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Gasket ID: 10.12" (257 mm) Minor : 0.66" (17 mm) P DONALDSON FTG11 CYCLOPAC, NISSAN Z9004 : 9.14" (232 mm) ID: 5.78" (147 mm) : 13.00" (330 mm) Gasket : 7.00" (178 mm) Gasket ID: 6.25" (159 mm) Bolt Hole Diameter: 0.66" (17 mm) P DONALDSON FTG13 CYCLOPAC A/C : 10.86" (276 mm) ID: 6.50" (165 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.62" (194 mm) P DONALDSON EAD11 A/C, MACK 57MD32 : 8.84" (225 mm) ID: 5.48" (139 mm) : 7.00" (178 mm) Gasket : 7.76" (194 mm) Gasket ID: 7.00" (178 mm) Bolt Hole Diameter: 0.66" (17 mm) Page 135

138 P MANN & HUMMEL C15165 : 5.83" (148 mm) ID: 2.83" (72 mm) : 12.80" (325 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 3.15" (80 mm) P MANN & HUMMEL C23440 : 8.93" (227 mm) ID: 4.56" (116 mm) : 14.61" (371 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 5.82" (148 mm) P MANN & HUMMEL C17225/3 : 6.47" (164 mm) ID: 3.41" (87 mm) : 13.38" (340 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 4.13" (105 mm) P MANN & HUMMEL C15165/3 : 5.83" (148 mm) ID: 2.83" (72 mm) : 12.80" (325 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 3.15" (80 mm) P DONALDSON EGB10 A/C, TEREX : 9.21" (234 mm) ID: 4.85" (123 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P DONALDSON EGB12 A/C, JOHN DEERE AR70106 : 10.40" (264 mm) ID: 6.04" (153 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.38" (162 mm) P DONALDSON EGB09 A/C, TEREX : 7.63" (194 mm) ID: 4.29" (109 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P181093, FINNED DONALDSON FHG08 A/C, MASSEY FERG M91 : 6.08" (154 mm) ID: 3.49" (89 mm) : 11.00" (279 mm) Gasket ID: 4.75" (121 mm) Minor : 0.66" (17 mm) P DONALDSON EBB16 A/C, VOLVO/WHITE : 13.83" (351 mm) ID: 9.49" (241 mm) : 15.50" (394 mm) Gasket ID: 9.88" (251 mm) P DONALDSON EBB15 A/C, VOLVO/WHITE : 12.09" (307 mm) ID: 7.73" (196 mm) : 15.00" (381 mm) Gasket ID: 9.00" (229 mm) P UNITED 250D32S, GMC : 8.84" (225 mm) ID: 5.48" (139 mm) : 27.50" (698 mm) Gasket ID: 7.00" (178 mm) P UNITED 250D31S, GMC : 8.84" (225 mm) ID: 5.48" (139 mm) : 21.60" (549 mm) Gasket : 7.76" (194 mm) Gasket ID: 7.00" (178 mm) P DONALDSON EBB16, IHC, GMC : 13.83" (351 mm) ID: 9.49" (241 mm) : 18.06" (459 mm) Gasket ID: 9.88" (251 mm) P CUMMINS, FLEETGUARD AF263 : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) P CAT 7M-9045, 7W-5316 : 11.09" (282 mm) ID: 6.73" (171 mm) : 16.06" (408 mm) Gasket : 10.64" (270 mm) Gasket ID: 9.88" (251 mm) P CAT 4M-8047, 7W-5389, SFTY-P w/holes 9" : 9.22" (234 mm) ID: 4.84" (123 mm) : 12.00" (305 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) P CAT 4M-9334, 7W-5317 : 11.09" (282 mm) ID: 6.73" (171 mm) : 13.00" (330 mm) Gasket : 10.64" (270 mm) Gasket ID: 9.88" (178 mm) P CAT 4M-9378 : 8.40" (213 mm) ID: 4.04" (103 mm) : 10.00" (254 mm) Gasket : 8.06" (205 mm) Gasket ID: 7.30" (185 mm) Page 136

139 P CAT 4L-9852 : 10.40" (264 mm) ID: 6.04" (153 mm) : 11.75" (298 mm) Gasket : 10.00" (254 mm) Gasket ID: 9.24" (234 mm) P CAT 4L-9851 : 10.40" (264 mm) ID: 6.04" (153 mm) : 7.75" (197 mm) Gasket : 10.00" (254 mm) Gasket ID: 9.24" (234 mm) P CAT 4L-9853 : 13.83" (351 mm) ID: 9.49" (241 mm) : 11.75" (298 mm) Gasket : 13.44" (341 mm) Gasket ID: 12.66" (321 mm) P CAT 5L-1203 : 13.83" (351 mm) ID: 9.49" (241 mm) : 17.75" (451 mm) Gasket : 13.44" (341 mm) Gasket ID: 12.66" (321 mm) P CAT 4S-8833 : 12.74" (324 mm) ID: 8.38" (213 mm) : 9.31" (236 mm) Gasket : 12.33" (313 mm) Gasket ID: 11.57" (293 mm) Bolt Hole Diameter: 0.94" (24 mm) P CAT 4S-8337 : 12.74" (324 mm) ID: 8.38" (213 mm) : 14.04" (357 mm) Gasket : 12.33" (313 mm) Gasket ID: 11.57" (293 mm) Bolt Hole Diameter: 0.94" (24 mm) P CAT 5S-4282 : 13.83" (351 mm) ID: 9.49" (241 mm) : 15.68" (398 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 12.84" (326 mm) P CAT 1P-7716, 7W-5495 : 11.49" (292 mm) ID: 8.12" (206 mm) : 13.00" (330 mm) Gasket : 11.14" (283 mm) Gasket ID: 10.36" (263 mm) P CAT 4N-0326 : 6.84" (174 mm) ID: 3.48" (88 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P CAT 1P-8483, 7W-5313 : 12.49" (317 mm) ID: 7.72" (196 mm) : 15.00" (381 mm) Gasket : 12.32" (313 mm) Gasket ID: 11.30" (287 mm) P CAT 7N-1225 : 10.40" (264 mm) ID: 6.04" (153 mm) : 9.00" (229 mm) Gasket : 8.88" (226 mm) Gasket ID: 8.12" (206 mm) P CAT 1W-2516, 7W-5216 : 12.49" (317 mm) ID: 9.13" (232 mm) : 18.50" (470 mm) Gasket : 12.32" (313 mm) Gasket ID: 11.30" (287 mm) P CAT 7N-9028 : 8.40" (213 mm) ID: 4.04" (103 mm) : 5.35" (136 mm) Gasket : 8.06" (205 mm) Gasket ID: 7.30" (185 mm) P CAT 8N-6309 : 19.29" (490 mm) ID: 12.93" (328 mm) : 9.84" (250 mm) Gasket ID: 16.85" (428 mm) P CAT 8M-3120 : 4.25" (108 mm) ID: 1.56" (40 mm) : 4.50" (114 mm) Gasket ID: 1.55" (39 mm) P CAT 6P-6664 : 6.84" (174 mm) ID: 4.24" (108 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.75" (121 mm) P CAT 2V-0036 : 6.84" (174 mm) ID: 4.24" (108 mm) : 9.00" (229 mm) Gasket ID: 5.42" (138 mm) P CAT 7G-8116 : 6.08" (154 mm) ID: 3.49" (89 mm) : 7.00" (178 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.75" (121 mm) Page 137

140 P CAT 9G-1518 : 6.84" (174 mm) ID: 4.24" (108 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 5.42" (138 mm) P CAT 4L-8463 : 10.25" (260 mm) ID: 5.51" (140 mm) : 12.00" (305 mm) P CAT 4L-8464 : 12.00" (305 mm) ID: 7.29" (185 mm) : 15.00" (381 mm) P IHC C1 : 12.09" (307 mm) ID: 7.73" (196 mm) : 17.25" (438 mm) Gasket : 10.32" (262 mm) Gasket ID: 9.56" (243 mm) Bolt Hole Diameter: 0.66" (17 mm) P MERCEDES-BENZ , KHD : 9.49" (241 mm) ID: 5.19" (132 mm) : 19.00" (483 mm) Bolt Hole Diameter: 0.44" (11 mm) Gasket ID: 6.25" (159 mm) P KOMATSU : 9.62" (244 mm) ID: 5.26" (134 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 8.68" (220 mm) P KOMATSU : 8.24" (209 mm) ID: 4.20" (107 mm) : 12.58" (320 mm) P KOMATSU : 8.42" (214 mm) ID: 4.21" (107 mm) : 16.25" (413 mm) Gasket : 8.38" (213 mm) Gasket ID: 7.62" (194 mm) P DONALDSON ECG11 AC, MACK, GMC : 8.84" (225 mm) ID: 5.48" (139 mm) : 28.00" (711 mm) Gasket ID: 7.00" (178 mm) P DONALDSON EBB16 A/C, MACK : 13.84" (352 mm) ID: 7.48" (190 mm) : 22.06" (560 mm) Gasket ID: 9.88" (251 mm) P JOHN DEERE AT65296 : 6.84" (174 mm) ID: 3.49" (89 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P VOLVO : 7.80" (198 mm) ID: 4.44" (113 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 5.42" (138 mm) P ROOF VACUUM DUST COLL. : 12.74" (324 mm) ID: 8.38" (213 mm) : 26.00" (660 mm) Gasket ID: 10.12" (257 mm) P STEIGER T1 : 12.09" (307 mm) ID: 7.73" (196 mm) : 21.00" (533 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P DONALDSON LONG EBB16 A/C : 13.83" (351 mm) ID: 9.49" (241 mm) : 21.02" (534 mm) Gasket ID: 9.88" (251 mm) P VORTOX VF160R : 12.74" (324 mm) ID: 8.38" (213 mm) : 26.00" (660 mm) Gasket : 10.88" (276 mm) Gasket ID: 10.12" (257 mm) Bolt Hole Diameter: 0.53" (13 mm) P FORD E3TZ9601C : 11.68" (297 mm) ID: 8.12" (206 mm) : 5.00" (127 mm) P IHC C1 : 11.68" (297 mm) ID: 8.12" (206 mm) : 7.00" (178 mm) Page 138

141 P FORD E2HZ9601B : 13.84" (352 mm) ID: 7.48" (190 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P MITSUBISHI ME : 8.70" (221 mm) ID: 5.36" (136 mm) : 17.40" (442 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 5.80" (147 mm) P CAT 4W-5716 : 13.83" (351 mm) ID: 9.49" (241 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 9.88" (251 mm) P GMC Brigadere w/cat 3208T : 10.40" (264 mm) ID: 6.04" (153 mm) : 10.00" (254 mm) Gasket ID: 9.00" (229 mm) P FORD DINN-9601-A : 6.68" (170 mm) ID: 3.75" (95 mm) : 14.75" (375 mm) Bolt Hole Diameter: 0.43" (11 mm) P IHC R1, AIR MAZE C : 8.38" (213 mm) ID: 4.56" (116 mm) : 15.00" (381 mm) P182001, FINNED LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 14.00" (356 mm) Gasket ID: 10.12" (257 mm) Minor : 0.53" (13 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 10.12" (257 mm) P LONG LIFE VERSION OF P : 8.84" (225 mm) ID: 5.48" (139 mm) : 22.00" (559 mm) P LONG LIFE VERSION OF P : 10.40" (264 mm) ID: 6.04" (153 mm) : 21.82" (554 mm) Gasket ID: 8.12" (206 mm) P LONG LIFE VERSION OF P : 12.74" (324 mm) ID: 8.38" (213 mm) : 22.00" (559 mm) Gasket ID: 10.12" (257 mm) P LONG LIFE VERSION OF P : 10.40" (264 mm) ID: 6.04" (153 mm) : 15.00" (381 mm) Gasket ID: 8.12" (206 mm) P AIR SAFETY FORD DINN-9R500-A : 3.62" (92 mm) ID: 2.94" (75 mm) : 13.69" (348 mm) Bolt Hole Diameter: 0.43" (11 mm) P CAT D10N 7W-9853 : 14.28" (363 mm) ID: 9.92" (252 mm) : 18.00" (457 mm) Gasket : 13.86" (352 mm) Gasket ID: 13.10" (332 mm) P182000, FINNED LONG LIFE VERSION OF P : 11.09" (282 mm) ID: 6.73" (171 mm) : 12.00" (305 mm) Gasket ID: 9.56" (243 mm) Minor : 0.53" (13 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.00" (457 mm) Gasket ID: 9.70" (246 mm) P LONG LIFE VERSION OF P : 10.40" (264 mm) ID: 6.04" (153 mm) : 26.00" (660 mm) Gasket ID: 8.12" (206 mm) P LONG LIFE VERSION OF P : 8.84" (225 mm) ID: 5.48" (139 mm) : 28.00" (711 mm) Page 139

142 P LONG LIFE VERSION OF P : 10.40" (264 mm) ID: 6.04" (153 mm) : 16.00" (406 mm) Gasket ID: 8.12" (206 mm) P LONG LIFE VERSION OF P : 13.83" (351 mm) ID: 9.49" (241 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.53" (13 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.53" (13 mm) P LONG LIFE VERSION OF P : 10.40" (264 mm) ID: 6.96" (177 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.53" (13 mm) P LONG LIFE VERSION OF P : 9.21" (234 mm) ID: 4.85" (123 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.62" (194 mm) P182035, FINNED LONG LIFE VERSION OF P : 9.21" (234 mm) ID: 4.85" (123 mm) : 10.00" (254 mm) Gasket ID: 7.62" (194 mm) Minor : 0.53" (13 mm) P LONG LIFE VERSION OF P : 13.83" (351 mm) ID: 9.49" (241 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.53" (13 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.53" (13 mm) P LONG LIFE VERSION OF P : 17.62" (448 mm) ID: 11.07" (281 mm) : 23.06" (586 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 14.00" (356 mm) P LONG LIFE VERSION OF P : 13.84" (352 mm) ID: 9.47" (241 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 9.88" (251 mm) P LONG LIFE VERSION OF P : 17.58" (447 mm) ID: 12.22" (310 mm) : 23.03" (585 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 14.00" (356 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P LONG LIFE VERSION OF P : 14.68" (373 mm) ID: 10.34" (263 mm) : 23.88" (607 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 11.00" (279 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.72" (196 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P LONG LIFE VERSION OF P : 10.40" (264 mm) ID: 6.04" (153 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.38" (162 mm) P182045, FINNED LONG LIFE VERSION OF P : 7.93" (201 mm) ID: 3.57" (91 mm) : 10.00" (254 mm) Gasket ID: 6.36" (162 mm) Minor : 0.53" (13 mm) P LONG LIFE VERSION OF P : 11.09" (282 mm) ID: 6.73" (171 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P TEREX , DRESSER VE1013, VE1195, DCI SRG20 : 17.58" (447 mm) ID: 12.22" (310 mm) : 19.03" (483 mm) Bolt Hole Diameter: 0.42" (11 mm) Gasket ID: 14.00" (356 mm) Page 140

143 P LONG LIFE VERSION OF P : 12.74" (324 mm) ID: 8.38" (213 mm) : 24.03" (610 mm) Bolt Hole Diameter: 0.94" (24 mm) Gasket ID: 9.88" (251 mm) P182050, FINNED LONG LIFE VERSION OF P : 4.08" (104 mm) ID: 2.49" (63 mm) : 10.00" (254 mm) Gasket ID: 2.58" (65 mm) Minor : 0.66" (17 mm) P182052, FINNED LONG LIFE VERSION OF P : 5.25" (133 mm) ID: 2.64" (67 mm) : 11.00" (279 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P182054, FINNED LONG LIFE VERSION OF P : 6.08" (154 mm) ID: 3.49" (89 mm) : 12.00" (305 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P LONG LIFE VERSION OF P : 12.74" (324 mm) ID: 8.38" (213 mm) : 19.06" (484 mm) Gasket ID: 9.88" (251 mm) P182059, FINNED LONG LIFE VERSION OF P : 6.08" (154 mm) ID: 3.49" (89 mm) : 15.00" (381 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P182062, FINNED LONG LIFE VERSION OF P : 5.25" (133 mm) ID: 3.26" (83 mm) : 15.00" (381 mm) Gasket ID: 3.95" (100 mm) Minor : 0.66" (17 mm) P182063, FINNED LONG LIFE VERSION OF P : 6.84" (174 mm) ID: 4.22" (107 mm) : 16.00" (406 mm) Gasket ID: 5.42" (138 mm) Minor : 0.66" (17 mm) P182064, FINNED LONG LIFE VERSION OF P : 7.93" (201 mm) ID: 5.32" (135 mm) : 16.00" (406 mm) Gasket ID: 6.36" (162 mm) Minor : 0.66" (17 mm) P LONG LIFE VERSION OF P : 6.84" (174 mm) ID: 4.24" (108 mm) : 9.00" (229 mm) P LONG LIFE VERSION OF P : 9.14" (232 mm) ID: 5.78" (147 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.25" (159 mm) P LONG LIFE VERSION OF P : 8.40" (213 mm) ID: 5.79" (147 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.53" (13 mm) P182072, FINNED LONG LIFE VERSION OF P : 4.08" (104 mm) ID: 2.49" (63 mm) : 14.00" (356 mm) Gasket ID: 2.58" (65 mm) Minor : 0.66" (17 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.72" (196 mm) : 23.00" (584 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P ISUZU LONG LIFE VERSION OF P : 9.14" (232 mm) ID: 5.78" (147 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.25" (159 mm) P Donaldson FTG13 CYCLOPAC A/C : 10.86" (276 mm) ID: 6.50" (165 mm) : 20.00" (508 mm) Gasket ID: 7.62" (194 mm) P LONG LIFE VERSION OF P : 9.21" (234 mm) ID: 4.85" (123 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.36" (162 mm) P FIAT , HANOMAG M1 : 10.43" (265 mm) ID: 6.02" (153 mm) : 20.00" (508 mm) Page 141

144 P FIAT , HANOMAG M1, M1 : 7.63" (194 mm) ID: 4.29" (109 mm) : 16.00" (406 mm) Gasket : 7.14" (181 mm) Bolt Hole Diameter: 0.66" (17 mm) P LONG LIFE VERSION OF P : 13.83" (351 mm) ID: 9.49" (241 mm) : 15.50" (394 mm) Gasket ID: 9.88" (251 mm) P LONG LIFE VERSION OF P : 12.09" (307 mm) ID: 7.73" (196 mm) : 15.00" (381 mm) Gasket ID: 9.00" (229 mm) P LONG LIFE VERSION OF P : 13.84" (352 mm) ID: 7.48" (190 mm) : 18.06" (459 mm) Gasket ID: 9.88" (251 mm) P185002, ULTRA-WEB Donaldson FHG16 A/C : 12.09" (307 mm) ID: 7.72" (196 mm) : 18.00" (457 mm) Gasket ID: 10.12" (257 mm) Minor : 0.66" (17 mm) P185069, ULTRA-WEB : 13.09" (332 mm) ID: 6.78" (172 mm) : 14.76" (375 mm) P AIR PANEL DPF PULSE CLEANER Width: 8.91" (227 mm) Depth: 1.82" (46 mm) Height: 11.27" (287 mm) P INDUSTRIAL BLOWER : 8.40" (213 mm) ID: 5.79" (147 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.00" (178 mm) P INDUSTRIAL BLOWER : 5.25" (133 mm) ID: 2.64" (67 mm) : 6.00" (152 mm) Bolt Hole Diameter: 0.53" (13 mm) P INDUSTRIAL BLOWER : 12.09" (307 mm) ID: 7.73" (196 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.89" (23 mm) Gasket ID: 8.12" (206 mm) P MITSUBISHI MD : 9.84" (250 mm) ID: 7.56" (192 mm) : 2.40" (61 mm) P MITSUBISHI MD : 10.64" (270 mm) ID: 7.95" (202 mm) : 2.13" (54 mm) P MITSUBISHI ME : 7.09" (180 mm) ID: 3.70" (94 mm) : 8.62" (219 mm) P TOYOTA , : 7.32" (186 mm) ID: 4.29" (109 mm) : 2.19" (56 mm) P TOYOTA , : 7.64" (194 mm) ID: 3.35" (85 mm) : 5.71" (145 mm) P TOYOTA : 7.32" (186 mm) ID: 3.07" (78 mm) : 4.92" (125 mm) P TOYOTA , ISUZU : 6.09" (155 mm) ID: 3.38" (86 mm) : 7.76" (197 mm) P TOYOTA : 7.64" (194 mm) ID: 3.35" (85 mm) : 5.71" (145 mm) Page 142

145 P AIR PANEL, ENGINE TOYOTA Width: 9.84" (250 mm) Depth: 6.14" (156 mm) Height: 1.61" (41 mm) P TOYOTA : 6.27" (159 mm) ID: 3.00" (76 mm) : 5.67" (144 mm) P TOYOTA : 5.28" (134 mm) ID: 3.03" (77 mm) : 11.02" (280 mm) Bolt Hole Diameter: 0.05" (1 mm) P HINO : 8.50" (216 mm) ID: 5.39" (137 mm) : 12.40" (315 mm) P HINO , A : 10.75" (273 mm) ID: 6.38" (162 mm) : 13.91" (353 mm) P SUZUKI : 4.74" (120 mm) ID: 2.60" (66 mm) : 5.20" (132 mm) P SUZUKI : 7.24" (184 mm) ID: 4.64" (118 mm) : 3.98" (101 mm) P AIR PANEL, ENGINE ISUZU Width: 6.63" (169 mm) Depth: 11.10" (282 mm) Height: 1.34" (34 mm) P ISUZU : 6.06" (154 mm) ID: 3.13" (80 mm) : 5.94" (151 mm) P500070, OVAL HONDA 17220PH4601 Width: 13.54" (344 mm) Height: 8.50" (216 mm) : 1.67" (42 mm) P MAZDA R : 6.10" (155 mm) ID: 3.11" (79 mm) : 5.90" (150 mm) P NISSAN : 4.98" (126 mm) ID: 0.28" (7 mm) : 6.65" (169 mm) Bolt Hole Diameter: 0.39" (10 mm) P AIR SAFETY KOMATSU : 3.27" (83 mm) ID: 2.12" (54 mm) : 9.33" (237 mm) P KOMATSU : 9.64" (245 mm) ID: 5.20" (132 mm) : 8.82" (224 mm) P AIR SAFETY KOMATSU : 5.08" (129 mm) ID: 3.82" (97 mm) : 17.60" (447 mm) P MITSUBISHI MD : 6.10" (155 mm) ID: 3.39" (86 mm) : 7.48" (190 mm) Bolt Hole Diameter: 0.51" (13 mm) P TOYOTA M91 : 8.62" (219 mm) ID: 4.27" (108 mm) : 4.70" (119 mm) P TOYOTA : 8.62" (219 mm) ID: 4.25" (108 mm) : 5.67" (144 mm) Page 143

146 P LIUNGONG LOADERS : 9.14" (232 mm) P LUBE SPIN-ON FULL FLOW MITSUBISHI MD135737, 30A : 2.68" (68 mm) Thread Size: M20 x 1.5 : 3.34" (85 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.67" (68 mm) Gasket ID: 2.15" (55 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION MITSUBISHI ME013307, ME : 4.21" (107 mm) Thread Size: M26 x 1.5 : 5.90" (150 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.87" (73 mm) Gasket ID: 2.19" (56 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI MD : 3.15" (80 mm) Thread Size: M20 x 1.5 : 2.52" (64 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.48" (63 mm) Gasket ID: 2.03" (52 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI MD : 3.00" (76 mm) Thread Size: M20 x 1.5 : 2.52" (64 mm) Gasket : 2.48" (63 mm) Gasket ID: 2.03" (52 mm) P LUBE SPIN-ON FULL FLOW TOYOTA , : 2.56" (65 mm) Thread Size: 3/4-16 : 2.80" (71 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.46" (62 mm) Gasket ID: 1.94" (49 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW TOYOTA , : 2.91" (74 mm) Thread Size: 3/4-16 : 3.31" (84 mm) Efficiency 99%: 50 Micron P LUBE SPIN-ON COMBINATION TOYOTA , : 3.93" (100 mm) Thread Size: M24 x 1.5 : 3.30" (84 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.15" (80 mm) Efficiency 50%: 5 Micron P LUBE SPIN-ON FULL FLOW TOYOTA : 2.56" (65 mm) Thread Size: 3/4-16 : 3.54" (90 mm) Gasket : 2.46" (62 mm) Gasket ID: 1.94" (49 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW TOYOTA : 3.15" (80 mm) Thread Size: 3/4-16 : 3.15" (80 mm) Gasket : 2.48" (63 mm) Gasket ID: 2.20" (56 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW ATLAS COPCO, BMW, DAIHATSU, SUZUKI : 3.15" (80 mm) Thread Size: 3/4-16 : 2.95" (75 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.48" (63 mm) Gasket ID: 2.03" (52 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW BRIGGS & STRATON , SUZUKI, DAIHATSU, MAZDA : 2.68" (68 mm) Thread Size: 3/4-16 : 2.56" (65 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.56" (65 mm) Gasket ID: 2.20" (56 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION ISUZU : 4.25" (108 mm) Thread Size: 1-12 : 5.14" (131 mm) Gasket : 2.90" (74 mm) Gasket ID: 2.15" (55 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW ISUZU : 3.54" (90 mm) Thread Size: M20 x 1.5 : 3.93" (100 mm) Gasket : 3.43" (87 mm) Gasket ID: 3.01" (76 mm) Efficiency 50%: 20 Micron Page 144

147 P LUBE SPIN-ON COMBINATION ISUZU , , : 4.88" (124 mm) Thread Size: 1 1/2-12 : 4.72" (120 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.59" (116 mm) Gasket ID: 3.86" (98 mm) Efficiency 50%: 16 Micron P LUBE SPIN-ON COMBINATION ISUZU : 3.54" (90 mm) Thread Size: M26 x 1.5 : 4.92" (125 mm) Gasket : 3.44" (87 mm) Gasket ID: 3.00" (76 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION ISUZU , : 4.88" (124 mm) Thread Size: 1 1/2-12 : 4.72" (120 mm) Gasket : 4.59" (116 mm) Gasket ID: 3.86" (98 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW ISUZU : 2.68" (68 mm) Thread Size: M20 x 1.5 : 3.35" (85 mm) Gasket : 2.58" (66 mm) Gasket ID: 2.15" (55 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW HONDA PA6-305 : 3.54" (90 mm) Thread Size: M22 x 1.5 : 3.18" (81 mm) Gasket : 2.52" (64 mm) Gasket ID: 2.27" (58 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW HONDA PR3-004 : 3.15" (80 mm) Thread Size: M20 x 1.5 : 3.15" (80 mm) Gasket : 2.49" (63 mm) Gasket ID: 2.00" (51 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW HONDA PH1-014, PK1-003 : 3.15" (80 mm) Thread Size: M20 x 1.5 : 3.94" (100 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.48" (63 mm) Gasket ID: 1.81" (46 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 37 Micron P LUBE SPIN-ON FULL FLOW MAZDA , A,RF : 3.16" (80 mm) Thread Size: M20 x 1.5 : 5.64" (143 mm) Gasket : 2.50" (64 mm) Gasket ID: 2.28" (58 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON BYPASS MAZDA FEY : 2.68" (68 mm) Thread Size: M20 x 1.5 : 3.35" (85 mm) Gasket : 2.56" (65 mm) Gasket ID: 3.03" (77 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION DAIHATSU, ISUZU, MAZDA : 3.58" (91 mm) Thread Size: M26 x 1.5 : 4.92" (125 mm) Gasket : 3.43" (87 mm) Gasket ID: 3.00" (76 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MAZDA TFY : 3.96" (101 mm) Thread Size: 1-12 : 4.92" (125 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.92" (100 mm) Gasket ID: 3.48" (88 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION MAZDA VSY : 4.02" (102 mm) Thread Size: M26 x 1.5 : 4.92" (125 mm) Gasket : 3.35" (85 mm) Gasket ID: 2.17" (55 mm) Efficiency 99%: 37 Micron P LUBE SPIN-ON FULL FLOW KIA : 2.68" (68 mm) Thread Size: M20 x 1.5 : 2.56" (65 mm) Gasket : 2.58" (66 mm) Gasket ID: 2.17" (55 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MAZDA JEY : 2.68" (68 mm) Thread Size: M20 x 1.5 : 3.35" (85 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.58" (66 mm) Gasket ID: 2.15" (55 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron Page 145

148 P LUBE SPIN-ON FULL FLOW NISSAN, MAZDA, MITSUBISHI : 2.68" (68 mm) Thread Size: M20 x 1.5 : 2.56" (65 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.56" (65 mm) Gasket ID: 2.19" (56 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION NISSAN L00, N00 : 3.66" (93 mm) Thread Size: 1-12 : 5.08" (129 mm) Gasket : 2.87" (73 mm) Gasket ID: 2.00" (51 mm) P LUBE SPIN-ON FULL FLOW NISSAN B10 : 3.15" (80 mm) Thread Size: 3/4-16 : 2.72" (69 mm) Gasket : 2.46" (62 mm) Gasket ID: 2.00" (51 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW NISSAN J00 : 2.56" (65 mm) Thread Size: 3/4-16 : 3.35" (85 mm) Gasket : 2.46" (62 mm) Gasket ID: 2.06" (52 mm) P LUBE SPIN-ON FULL FLOW MOTORCRAFT : 3.64" (92 mm) Thread Size: M22 x 1.5 : 5.47" (139 mm) Gasket : 2.75" (70 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW PEUGEOT : 3.43" (87 mm) Thread Size: M20 x 1.5 : 3.50" (89 mm) Gasket : 3.33" (85 mm) Gasket ID: 2.81" (71 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI 32B : 4.02" (102 mm) Thread Size: 1-12 : 5.91" (150 mm) Gasket : 3.91" (99 mm) Gasket ID: 3.46" (88 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI : 4.25" (108 mm) Thread Size: 1 1/2-12 : 10.42" (265 mm) Gasket : 4.02" (102 mm) Gasket ID: 3.42" (87 mm) Efficiency 50%: 16 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI : 4.45" (113 mm) Thread Size: 1 1/8-16 : 6.73" (171 mm) Gasket : 2.93" (74 mm) Gasket ID: 2.54" (65 mm) Efficiency 99%: 48 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI 32A : 4.21" (107 mm) Thread Size: 1-12 : 3.96" (101 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.90" (99 mm) Gasket ID: 3.46" (88 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW NISSAN 15201Z9000, 15201Z9002, 15201Z9003 : 4.33" (110 mm) Thread Size: 1 1/8-16 : 6.73" (171 mm) Gasket : 3.90" (99 mm) Gasket ID: 3.46" (88 mm) Efficiency 50%: 16 Micron P LUBE SPIN-ON FULL FLOW PROTON : 3.52" (89 mm) Thread Size: M20 x 1.5 : 3.23" (82 mm) Gasket : 2.44" (62 mm) Gasket ID: 1.98" (50 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON COMBINATION CATERPILLAR 5I7950 : 4.25" (108 mm) Thread Size: M32 x 1.5 : 8.77" (223 mm) Relief Valve Setting: PSI ( Bar) Stand Pipe: Yes Y/N Gasket : 4.02" (102 mm) Gasket ID: 3.62" (92 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW ECHLIN OF18 : 3.00" (76 mm) Thread Size: 3/4-16 : 3.46" (88 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.50" (64 mm) Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY MITSUBISHI : 2.83" (72 mm) ID: 0.43" (11 mm) : 1.73" (44 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY MITSUBISHI ME : 3.62" (92 mm) ID: 0.73" (19 mm) : 5.51" (140 mm) Efficiency 99%: 30 Micron Page 146

149 P FUEL CARTRIDGE PRIMARY MITSUBISHI MA : 1.38" (35 mm) ID: 1.73" (44 mm) : 0.45" (11 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY MITSUBISHI ME971550, ME : 3.58" (91 mm) ID: 0.59" (15 mm) : 5.43" (138 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY TOYOTA : 2.95" (75 mm) ID: 0.63" (16 mm) : 2.60" (66 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY MANN B405C, : 4.25" (108 mm) ID: 0.78" (20 mm) : 6.73" (171 mm) Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY MANN EK405, P1018/1 : 3.86" (98 mm) ID: 0.87" (22 mm) : 6.35" (161 mm) Gasket : 1.50" (38 mm) Gasket ID: 0.70" (18 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY YANMAR : 1.38" (35 mm) ID: 0.47" (12 mm) : 3.81" (97 mm) Efficiency 50%: 12 Micron P FUEL CARTRIDGE PRIMARY YANMAR : 1.38" (35 mm) ID: 0.43" (11 mm) : 2.44" (62 mm) Efficiency 50%: 16 Micron P FUEL CARTRIDGE PRIMARY YANMAR : 1.38" (35 mm) ID: 0.47" (12 mm) : 3.43" (87 mm) Efficiency 50%: 12 Micron P FUEL CARTRIDGE PRIMARY CAT 5S7645 : 1.12" (28 mm) ID: G 8-36" (G 8-36 mm) : 2.72" (69 mm) P FUEL CARTRIDGE PRIMARY KUBOTA , : 1.14" (29 mm) ID: 0.51" (13 mm) : 3.35" (85 mm) Efficiency 50%: 12 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI MB433425, TCM : 3.16" (80 mm) Thread Size: M20 x 1.5 : 4.72" (120 mm) Gasket : 3.06" (78 mm) Gasket ID: 2.48" (63 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI : 3.15" (80 mm) Thread Size: M20 x 1.5 : 3.93" (100 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.52" (64 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY DAIHATSU : 3.90" (99 mm) Thread Size: M20 x 1.5 : 5.43" (138 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.19" (56 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY MAZDA : 3.72" (95 mm) Thread Size: M20 x 1.5 : 4.72" (120 mm) Gasket : 2.81" (71 mm) Gasket ID: 1.97" (50 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY MAZDA A : 3.72" (95 mm) Thread Size: M20 x 1.5 : 5.17" (131 mm) Gasket : 3.62" (92 mm) Gasket ID: 2.81" (71 mm) Efficiency 50%: 10 Micron P FUEL CARTRIDGE PRIMARY YANMAR , KUBOTA : 1.97" (50 mm) ID: 0.79" (20 mm) : 3.50" (89 mm) Efficiency 50%: 16 Micron P FUEL SPIN-ON PRIMARY NISSAN Z9000, Z9005 : 3.15" (80 mm) Thread Size: 3/4-16 : 4.50" (114 mm) Gasket : 2.50" (64 mm) Gasket ID: 2.11" (54 mm) Efficiency 50%: 10 Micron Page 147

150 P FUEL CARTRIDGE PRIMARY YANMAR , KUBOTA : 1.38" (35 mm) ID: 0.43" (11 mm) : 3.39" (86 mm) Efficiency 50%: 16 Micron P FUEL SPIN-ON PRIMARY NISSAN T70 : 3.15" (80 mm) Thread Size: 3/4-16 : 6.89" (175 mm) Gasket : 2.59" (66 mm) Gasket ID: 2.00" (51 mm) Efficiency 50%: 10 Micron P FUEL CARTRIDGE PRIMARY LEYLAND ABU9642, MAZDA SL : 3.44" (87 mm) ID: 0.75" (19 mm) : 3.41" (87 mm) Efficiency 50%: 10 Micron P HITACHI N : 3.54" (90 mm) ID: 1.93" (49 mm) : 10.91" (277 mm) ID Width: 1.83" (46 mm) P HITACHI : 2.87" (73 mm) ID: 1.41" (36 mm) : 4.45" (113 mm) P LUBE CARTRIDGE FULL FLOW MITSUBISHI ME : 3.97" (101 mm) ID: 1.20" (30 mm) : 9.21" (234 mm) P LUBE CARTRIDGE FULL FLOW MITSUBISHI : 4.48" (114 mm) ID: 2.84" (72 mm) : 10.83" (275 mm) Efficiency 50%: 16 Micron P LUBE CARTRIDGE FULL FLOW TOYOTA : 4.84" (123 mm) ID: 0.79" (20 mm) : 5.43" (138 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW HINO : 4.80" (122 mm) ID: 0.67" (17 mm) : 8.62" (219 mm) Efficiency 50%: 5 Micron P LUBE CARTRIDGE FULL FLOW HINO , : 4.80" (122 mm) ID: 0.67" (17 mm) : 9.80" (249 mm) Efficiency 50%: 5 Micron P FUEL SPIN-ON PRIMARY FSA FF2028, RYCO Z169A : 3.15" (80 mm) Thread Size: 3/4-16 : 3.31" (84 mm) Gasket : 2.48" (63 mm) Gasket ID: 1.76" (45 mm) Efficiency 50%: 10 Micron P CAT 3S3875 : 3.36" (85 mm) ID: 1.81" (46 mm) : 9.06" (230 mm) P LUBE CARTRIDGE FULL FLOW ISUZU : 2.85" (72 mm) ID: 1.30" (33 mm) : 5.39" (137 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW ISUZU , : 3.35" (85 mm) ID: 1.57" (40 mm) : 5.63" (143 mm) Efficiency 50%: 16 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI : 3.62" (92 mm) ID: 0.69" (18 mm) : 4.33" (110 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI : 3.62" (92 mm) ID: 0.69" (18 mm) : 6.30" (160 mm) Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY ISUZU : 2.95" (75 mm) ID: 0.75" (19 mm) : 6.97" (177 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW ISUZU : 5.51" (140 mm) ID: 1.34" (34 mm) : 7.60" (193 mm) Efficiency 50%: 20 Micron Page 148

151 P LUBE CARTRIDGE FULL FLOW ISUZU : 3.54" (90 mm) ID: 1.92" (49 mm) : 4.09" (104 mm) Gasket : 1.93" (49 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW NISSAN : 3.11" (79 mm) ID: 1.56" (40 mm) : 5.35" (136 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW NISSAN : 4.33" (110 mm) ID: 2.04" (52 mm) : 8.11" (206 mm) Efficiency 50%: 16 Micron P LUBE CARTRIDGE FULL FLOW NISSAN : 3.94" (100 mm) ID: 1.56" (40 mm) : 7.19" (183 mm) Efficiency 50%: 16 Micron P KOBELCO R36P0019 : 1.67" (42 mm) ID: 0.94" (24 mm) : 3.31" (84 mm) P LUBE SPIN-ON FULL FLOW FIAT : 4.25" (108 mm) Thread Size: M30 x 2 : 5.62" (143 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 16 Micron P LUBE CARTRIDGE FULL FLOW MANN H20211 : 7.64" (194 mm) ID: 4.65" (118 mm) : 6.71" (170 mm) Efficiency 50%: 20 Micron P HYDRAULIC SPIN-ON FORD FONNB486BB, NEW HOLLAND : 5.35" (136 mm) Thread Size: 1 3/4-16 : 9.57" (243 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.29" (109 mm) Gasket ID: 3.90" (99 mm) P LUBE CARTRIDGE FULL FLOW LEYLAND 11K243 : 3.74" (95 mm) ID: 1.91" (49 mm) : 7.05" (179 mm) Efficiency 50%: 16 Micron P FUEL CARTRIDGE PRIMARY ISUZU : 3.74" (95 mm) ID: 1.07" (27 mm) : 3.72" (95 mm) Efficiency 50%: 20 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI ME : 4.21" (107 mm) Thread Size: 1 1/8-16 : 7.88" (200 mm) P Hitachi : 3.50" (90 mm) Height: 13.50" (344 mm) P Hino : 8.46" (215 mm) ID: 4.72" (120 mm) : 13.35" (339 mm) P AIR SAFETY Hino : 4.37" (111 mm) ID: 3.19" (81 mm) : 12.75" (324 mm) P Mazda SLA213Z40 : 7.75" (197 mm) ID: 5.00" (127 mm) : 8.09" (205 mm) P FUEL SPIN-ON PRIMARY ISUZU ENGINES : 3.24" (82 mm) Thread Size: 3/4-16 Height: 3.20" (81 mm) P FUEL/WATER SEPARATOR SPIN-ON : 3.67" (93 mm) Thread Size: 3/4-16 : 5.09" (129 mm) P LUBE SPIN-ON FULL FLOW : 3.98" (101 mm) Thread Size: 1-12 Height: 5.85" (149 mm) P FUEL SPIN-ON PRIMARY Mitsubishi ME : 3.86" (98 mm) Thread Size: M20 X 15 Height: 5.46" (139 mm) Page 149

152 P FUEL CARTRIDGE PRIMARY TOYOTA HILUX : 3.28" (83 mm) ID: 0.35" (9 mm) : 3.00" (76 mm) P LUBE CARTRIDGE NISSAN W200 : 2.87" (73 mm) ID: 0.93" (24 mm) : 4.02" (102 mm) P AIR PANEL, VENTILATION CAT 5G-1913 Width: 8.00" (203 mm) Depth: 2.19" (56 mm) Height: 2.19" (56 mm) P UAC 250C124 MF M91 : 5.31" (135 mm) ID: 2.22" (56 mm) : 10.50" (267 mm) Gasket : 3.60" (91 mm) Gasket ID: 3.00" (76 mm) Bolt Hole Diameter: 0.75" (19 mm) P AIR SAFETY UAC 250C126S MF M1 : 2.10" (53 mm) ID: 1.90" (48 mm) : 10.25" (260 mm) Bolt Hole Diameter: 0.31" (8 mm) P AIR SAFETY STEIGER T1 : 7.64" (194 mm) ID: 6.04" (153 mm) : 20.00" (508 mm) Bolt Hole Diameter: 0.66" (17 mm) P TIPTON, FLEETGUARD AF1907M : 10.41" (264 mm) ID: 6.03" (153 mm) : 26.00" (660 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P DONALDSON EBB09, FORD F0HZ9601A, MTRCRFT FA1078 : 7.32" (186 mm) ID: 5.40" (137 mm) : 23.00" (584 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 6.56" (167 mm) P FREIGHTLINER OFF HWY TRUCK : 12.09" (307 mm) ID: 7.73" (196 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P521598, KONEPAC DONALDSON EBA13 KONEPAC, KENWORTH, PETERBILT : 11.83" (300 mm) ID: 7.37" (187 mm) : 24.00" (610 mm) Gasket : 9.81" (249 mm) Gasket ID: 5.38" (137 mm) P521685, WRAP CATERPILLAR 8N-2555 Width: 20.10" (511 mm) : 9.84" (250 mm) P521686, WRAP CATERPILLAR 4W-7103 Width: 22.90" (582 mm) : 23.97" (609 mm) P AIR SAFETY VOLVO V : 8.24" (209 mm) ID: 7.12" (181 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY CAT 8N-6883 : 6.31" (160 mm) ID: 4.63" (118 mm) : 16.15" (410 mm) Flange Diameter: 9.06" (230 mm) P522293, KONEPAC DONALDSON EBA11 KONEPAC : 10.40" (264 mm) ID: 6.95" (177 mm) : 28.00" (711 mm) Gasket : 7.50" (190 mm) Gasket ID: 3.96" (101 mm) P KOMATSU : 5.25" (133 mm) ID: 3.26" (83 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 3.76" (96 mm) P AIR SAFETY KOMATSU S : 5.56" (141 mm) ID: 4.20" (107 mm) : 10.57" (268 mm) Bolt Hole Diameter: 0.66" (17 mm) P KOMATSU P, : 9.73" (247 mm) ID: 5.66" (144 mm) : 12.56" (319 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 8.68" (220 mm) Page 150

153 P AIR SAFETY KOMATSU S, : 5.25" (133 mm) ID: 4.13" (105 mm) : 15.83" (402 mm) Bolt Hole Diameter: 0.66" (17 mm) P MCI BUS 9G-3-37 : 15.09" (383 mm) ID: 8.70" (221 mm) : 15.34" (390 mm) Bolt Hole Diameter: 0.75" (19 mm) Gasket ID: 9.00" (229 mm) P FORD E8HZ9601A : 13.84" (352 mm) ID: 7.48" (190 mm) : 7.00" (178 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P AIR PANEL, VENTILATION Width: 44.00" (1118 mm) Depth: 3.19" (81 mm) Height: 13.00" (330 mm) P AIR SAFETY CAT 8N-2556 : 12.82" (326 mm) ID: 10.14" (258 mm) : 9.81" (249 mm) P VOLVO/WHITE V : 12.74" (324 mm) ID: 8.38" (213 mm) : 15.75" (400 mm) Gasket ID: 9.88" (251 mm) P INT'L R91, AMERICAN LAFRANCE, MERCEDES : 6.00" (152 mm) ID: 4.62" (117 mm) : 8.56" (217 mm) P FORD 6CYL-300, C40Z9601A : 8.12" (206 mm) ID: 6.62" (168 mm) : 3.25" (83 mm) P GM V8-305, V8-350, V8-454 : 12.00" (305 mm) ID: 9.88" (251 mm) : 3.46" (88 mm) P FORD V8-460 C8A29601A : 13.28" (337 mm) ID: 11.28" (287 mm) : 2.78" (71 mm) P FORD C8TZ9601A : 10.87" (276 mm) ID: 9.00" (229 mm) : 2.21" (56 mm) P GM V8-366, V : 11.31" (287 mm) ID: 8.56" (217 mm) : 5.56" (141 mm) P INT'L C91, C1 : 12.62" (321 mm) ID: 9.75" (248 mm) : 5.00" (127 mm) P FORD V8-370, V8-429 : 12.62" (321 mm) ID: 9.75" (248 mm) : 5.51" (140 mm) P FORD V8-370, V8-475 : 12.60" (320 mm) ID: 8.35" (212 mm) : 5.50" (140 mm) P INT'L C1,C2 : 11.65" (296 mm) ID: 8.31" (211 mm) : 5.00" (127 mm) P GM 6CYL-292, V8-305, JEEP : 9.69" (246 mm) ID: 8.19" (208 mm) : 3.53" (90 mm) P GM V8-305, V8-350, V8-454, CHEV : 12.00" (305 mm) ID: 9.88" (251 mm) : 5.47" (139 mm) Page 151

154 P GM V8-379, : 13.88" (353 mm) ID: 11.61" (295 mm) : 4.05" (103 mm) P AIR PANEL, ENGINE CHRYSLER Width: 5.30" (135 mm) Depth: 1.62" (41 mm) Height: 8.07" (205 mm) P GM MELS : 8.50" (216 mm) ID: 6.97" (177 mm) : 2.46" (62 mm) P524388, CYLINDRICAL GM, BENDIX AIR COMPRESSORS : 2.80" (71 mm) ID: 1.30" (33 mm) : 1.01" (26 mm) P CHRYSLER : 8.25" (210 mm) ID: 6.50" (165 mm) : 3.00" (76 mm) P DGE 6CYL-225, V8-318, AMC, CHRYSLER, JEEP : 10.25" (260 mm) ID: 7.62" (194 mm) : 2.75" (70 mm) P524392, CYLINDRICAL BENDIX AIR COMPRESSOR : 3.00" (76 mm) ID: 1.62" (41 mm) : 1.37" (35 mm) P FORD CARGO 7.8 E7HZ-9601-B : 10.40" (264 mm) ID: 6.04" (153 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.62" (194 mm) P AIR SAFETY FORD TRUCKS WITH DONALDSON FHD16 AIR CLEANER : 8.48" (215 mm) ID: 6.20" (157 mm) : 9.65" (245 mm) Bolt Hole Diameter: 0.66" (17 mm) P GM : 9.50" (241 mm) ID: 6.89" (175 mm) : 27.44" (697 mm) Gasket ID: 8.12" (206 mm) P AIR PANEL, ENGINE FARR DYNACELL T512 Width: 11.50" (292 mm) Depth: 5.00" (127 mm) Height: 15.00" (381 mm) P524837, SPECIAL FARR ECOII # , UNITED F-ECOII- 9X24 Body Diameter: 9.75" (248 mm) : 24.00" (610 mm) Outlet Diameter: 8.00" (203 mm) P524838, SPECIAL FARR ECOII # , UNITED F-ECOII- 13X24 Body Diameter: 13.50" (343 mm) : 24.00" (610 mm) Outlet Diameter: 7.00" (178 mm) P AIR PANEL, VENTILATION CAT 7T-1890 Width: 5.35" (136 mm) Depth: 2.83" (72 mm) Height: 26.18" (665 mm) P AIR SAFETY CAT 7W-9567 : 10.03" (255 mm) ID: 8.14" (207 mm) : 18.03" (458 mm) Flange Diameter: 12.09" (307 mm) P AIR PANEL, ENGINE FORD F100/F150 TRUCKS Width: 5.86" (149 mm) Depth: 1.65" (42 mm) Height: 12.87" (327 mm) P AIR OIL SEPARATOR ATLAS-COPCO , , : 6.88" (175 mm) ID: 4.12" (105 mm) : 12.50" (318 mm) Flange Diameter: 11.81" (300 mm) Page 152

155 P AIR OIL SEPARATOR ATLAS-COPCO , : 6.88" (175 mm) ID: 4.12" (105 mm) : 19.72" (501 mm) Flange Diameter: 11.81" (300 mm) P AIR OIL SEPARATOR ATLAS-COPCO , , M XAU50-60 : 10.62" (270 mm) ID: 8.38" (213 mm) : 32.18" (817 mm) Flange Diameter: 15.75" (400 mm) P AIR OIL SEPARATOR GARDNER DENVER KIT, : 8.37" (213 mm) ID: 5.88" (149 mm) : 17.00" (432 mm) Flange Diameter: 11.94" (303 mm) P AIR OIL SEPARATOR SULLAIR #11320, 40635, 11018, 11001, : 6.88" (175 mm) ID: 4.12" (105 mm) : 17.25" (438 mm) Flange Diameter: 7.88" (200 mm) P AIR OIL SEPARATOR SULLAIR SERIES 20/25, 11145, 40259, 47284, 1087 : 11.88" (302 mm) ID: 9.62" (244 mm) : 26.12" (663 mm) Flange Diameter: 13.88" (353 mm) P DONALDSON CYCLOPAC AIR CLEANER MEL:G : 6.09" (155 mm) ID: 3.48" (88 mm) : 15.00" (381 mm) P AIR OIL SEPARATOR GARDNER DENVER ESN,MO , # & : 10.62" (270 mm) ID: 8.38" (213 mm) : 23.75" (603 mm) Flange Diameter: 14.38" (365 mm) P AIR OIL SEPARATOR GARDNER DENVER S0150,ESPF,QF,RF ,# : 14.88" (378 mm) ID: 12.38" (314 mm) : 27.19" (691 mm) Flange Diameter: 17.56" (446 mm) P AIR OIL SEPARATOR JOY G, D 185 QP, : 8.38" (213 mm) ID: 5.25" (133 mm) : 10.31" (262 mm) Flange Diameter: 10.38" (264 mm) P AIR OIL SEPARATOR ATLAS COPCO W/SHEILD : 5.75" (146 mm) ID: 3.62" (92 mm) : 10.25" (260 mm) Flange Diameter: 8.66" (220 mm) P AIR OIL SEPARATOR ATLAS COPCO W/SHIELD : 8.38" (213 mm) ID: 5.88" (149 mm) : 9.50" (241 mm) Flange Diameter: 11.81" (300 mm) P AIR OIL SEPARATOR LEROI ES W/SHIELD : 5.75" (146 mm) ID: 3.25" (83 mm) : 8.25" (210 mm) Flange Diameter: 7.50" (190 mm) P AIR OIL SEPARATOR LEROI Q160G,D Q175G,D, # : 8.37" (213 mm) ID: 5.25" (133 mm) : 12.00" (305 mm) Flange Diameter: 10.60" (269 mm) P AIR OIL SEPARATOR SULLAIR SERIES 16,250,300,375, 11200,40670, 107 : 8.00" (203 mm) ID: 5.88" (149 mm) : 24.18" (614 mm) Flange Diameter: 10.66" (271 mm) P AIR OIL SEPARATOR GARDNER DENVER 55B2, EST65994 KIT : 21.00" (533 mm) ID: 18.25" (464 mm) : 36.29" (922 mm) Flange Diameter: 25.69" (653 mm) P AIR OIL SEPARATOR GARDNER DENVER 55B4, ESM66049 KIT : 8.37" (213 mm) ID: 5.25" (133 mm) : 23.46" (596 mm) Flange Diameter: 12.00" (305 mm) Page 153

156 P AIR OIL SEPARATOR INGERSOLL RAND : 6.12" (155 mm) ID: 3.62" (92 mm) : 15.75" (400 mm) Flange Diameter: 8.12" (206 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 4.88" (124 mm) ID: 3.12" (79 mm) : 10.88" (276 mm) Flange Diameter: 6.62" (168 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 5.75" (146 mm) ID: 3.62" (92 mm) : 11.50" (292 mm) Flange Diameter: 7.12" (181 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 9.63" (245 mm) ID: 6.88" (175 mm) : 15.00" (381 mm) Flange Diameter: 12.25" (311 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 11.88" (302 mm) ID: 8.38" (213 mm) : 18.25" (464 mm) Flange Diameter: 14.75" (375 mm) P AIR OIL SEPARATOR INGERSOLL RAND SHEILD : 14.62" (371 mm) ID: 12.12" (308 mm) : 36.80" (935 mm) Flange Diameter: 18.00" (457 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 11.88" (302 mm) ID: 8.38" (213 mm) : 12.75" (324 mm) Flange Diameter: 13.25" (337 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 6.88" (175 mm) ID: 3.81" (97 mm) : 9.25" (235 mm) Flange Diameter: 9.94" (252 mm) P AIR OIL SEPARATOR MANN : 11.88" (302 mm) ID: 8.38" (213 mm) : 19.75" (502 mm) Flange Diameter: 14.00" (356 mm) P CASE A : 9.91" (252 mm) ID: 6.05" (154 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P AIR SAFETY CASE A : 5.95" (151 mm) ID: 4.85" (123 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY CASE AG EQUIPMENT : 5.56" (141 mm) ID: 4.42" (112 mm) : 15.63" (397 mm) Bolt Hole Diameter: 0.50" (13 mm) P AIR SAFETY CASE AG EQUIPMENT, IHC R1 : 4.47" (114 mm) ID: 3.43" (87 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.57" (14 mm) P CASE AG EQUIPMENT : 9.00" (229 mm) ID: 5.69" (145 mm) : 16.00" (406 mm) Gasket ID: 6.12" (155 mm) P LIFT TRUCK : 6.84" (174 mm) ID: 4.24" (108 mm) : 4.65" (118 mm) Gasket ID: 5.62" (143 mm) P526413, CYLINDRICAL CUMMINS : 2.88" (73 mm) ID: 1.41" (36 mm) : 2.72" (69 mm) P CAT 4W-5228 : 14.68" (373 mm) ID: 10.34" (263 mm) : 24.00" (610 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 11.00" (279 mm) Page 154

157 P JOHN DEERE AT75036 : 5.94" (151 mm) ID: 4.86" (123 mm) : 11.00" (279 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 5.00" (127 mm) P KOMASTU : 10.87" (276 mm) ID: 6.50" (165 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.62" (194 mm) P AIR SAFETY KOMATSU , DCI-NDL R : 6.40" (163 mm) ID: 5.28" (134 mm) : 13.75" (349 mm) Bolt Hole Diameter: 0.66" (17 mm) P MITSUBISHI ME063135, ME : 10.87" (276 mm) ID: 6.50" (165 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.62" (194 mm) P CUMMINS : 9.62" (244 mm) ID: 5.00" (127 mm) : 6.38" (162 mm) P WHITE : 9.56" (243 mm) ID: 4.07" (103 mm) : 14.75" (375 mm) Bolt Hole Diameter: 0.39" (10 mm) P AIR SAFETY IHC C1 : 9.98" (253 mm) ID: 5.48" (139 mm) : 20.28" (515 mm) P CASE A43734 : 11.62" (295 mm) ID: 7.19" (183 mm) : 7.25" (184 mm) P CASE A43735 : 6.75" (171 mm) ID: 5.56" (141 mm) : 6.00" (152 mm) Bolt Hole Diameter: 0.39" (10 mm) P AIR SAFETY IHC C1 : 3.88" (99 mm) ID: 2.50" (64 mm) : 11.75" (298 mm) Bolt Hole Diameter: 0.64" (16 mm) P IHC C1 : 7.33" (186 mm) ID: 4.00" (102 mm) : 14.25" (362 mm) Bolt Hole Diameter: 0.39" (10 mm) P FORD D6NN-9601-A : 5.31" (135 mm) ID: 3.08" (78 mm) : 11.25" (286 mm) Bolt Hole Diameter: 0.45" (11 mm) P AIR SAFETY FORD D6NN-9R500-A : 2.94" (75 mm) ID: 2.38" (60 mm) : 9.94" (252 mm) Bolt Hole Diameter: 0.45" (11 mm) P AIR SAFETY FORD D6NN-9R-500B : 2.94" (75 mm) ID: 2.38" (60 mm) : 13.38" (340 mm) Bolt Hole Diameter: 0.45" (11 mm) P IHC C1 : 9.98" (253 mm) ID: 5.48" (139 mm) : 20.28" (515 mm) P FORD D6NN-9601-B : 5.31" (135 mm) ID: 3.08" (78 mm) : 14.69" (373 mm) P AIR SAFETY IHC C1 : 5.42" (138 mm) ID: 4.02" (102 mm) : 19.25" (489 mm) Bolt Hole Diameter: 0.64" (16 mm) P IHC C1, GMC : 5.38" (137 mm) ID: 4.12" (105 mm) : 15.69" (399 mm) Bolt Hole Diameter: 0.64" (16 mm) Page 155

158 P MF M91 : 11.50" (292 mm) ID: 7.25" (184 mm) : 15.68" (398 mm) Bolt Hole Diameter: 0.39" (10 mm) P AIR SAFETY MF M91 : 6.88" (175 mm) ID: 5.42" (138 mm) : 13.94" (354 mm) P AIR SAFETY MF M91 : 7.33" (186 mm) ID: 6.12" (155 mm) : 20.87" (530 mm) Bolt Hole Diameter: 0.64" (16 mm) P MF M91 : 12.50" (318 mm) ID: 7.50" (190 mm) : 22.25" (565 mm) Bolt Hole Diameter: 0.39" (10 mm) P COVER GASKET P526678, RADIALSEAL FREIGHTLINER : 9.33" (237 mm) ID: 5.15" (131 mm) : 14.49" (368 mm) P CASE K : 6.08" (154 mm) ID: 4.11" (104 mm) : 10.45" (265 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY CASE IH 510B LDR, TD8 CRWLR, # C1 : 4.09" (104 mm) ID: 2.91" (74 mm) : 14.00" (356 mm) Bolt Hole Diameter: 0.66" (17 mm) P526840, FINNED CASE IH 510B LDR, TD8 CRWLR, # C1 : 6.80" (173 mm) ID: 4.24" (108 mm) : 15.00" (381 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P AIR OIL SEPARATOR INGERSOLL RAND COMPRESSOR # : 10.38" (264 mm) ID: 7.88" (200 mm) : 13.00" (330 mm) Flange Diameter: 11.75" (298 mm) P AIR OIL SEPARATOR INGERSOLL RAND COMPRESSOR # / : 11.88" (302 mm) ID: 8.38" (213 mm) : 37.25" (946 mm) Flange Diameter: 16.30" (414 mm) P AIR SAFETY CASE K : 2.94" (75 mm) ID: 1.88" (48 mm) : 9.64" (245 mm) P CLARK IR, THERMOKING, YALE & TOWNE : 4.38" (111 mm) ID: 3.00" (76 mm) : 7.00" (178 mm) P MITSUBISHI MB : 9.40" (239 mm) ID: 5.78" (147 mm) : 5.18" (132 mm) P TOYOTA : 8.62" (219 mm) ID: 4.29" (109 mm) : 5.67" (144 mm) P526801, FINNED KUBOTA , CASE : 3.27" (83 mm) ID: 1.67" (42 mm) : 7.00" (178 mm) Gasket ID: 2.20" (56 mm) Minor : 0.42" (11 mm) P HINO : 7.36" (187 mm) ID: 4.78" (121 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P FORD F1HZ0601A, MOTORCRAFT FA1076 : 7.32" (186 mm) ID: 5.40" (137 mm) : 13.38" (340 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 5.82" (148 mm) P527484, RADIALSEAL GM TRUCK # ,FORD F3HZ9601A, MTCFT FA1119 : 9.33" (237 mm) ID: 5.15" (131 mm) : 12.28" (312 mm) Page 156

159 P AIR SAFETY CAT 4W-6691, 7W-6754, LIFT TRUCKS : 3.99" (101 mm) ID: 2.32" (59 mm) : 5.18" (132 mm) Flange Diameter: 6.69" (170 mm) P FORD, DONALDSON EGB16 A/C : 13.84" (352 mm) ID: 9.47" (241 mm) : 13.03" (331 mm) Gasket ID: 9.88" (251 mm) P AIR CLEANER, DISPOSABLE FREIGHTLINER, FARR ECOII CM #78105 Body Diameter: 11.00" (279 mm) Inlet Location: 6.00" (152 mm) Inlet Diameter: 8.00" (203 mm) : 24.00" (610 mm) Gasket : 18.50" (470 mm) Inlet : 8.88" (226 mm) P AIR PANEL, VENTILATION CAT 6T-988, MIDSIZE CRAWLERS & LOADERS Width: 5.91" (150 mm) Depth: 2.19" (56 mm) Height: 21.26" (540 mm) P HINO B : 9.14" (232 mm) ID: 5.78" (147 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.25" (159 mm) P AIR SAFETY, RADIALSEAL DONALDSONEPG11, Ford F3HZ-9R500-A, MTRCFT FA1120 : 5.30" (135 mm) ID: 3.78" (96 mm) : 11.82" (300 mm) P527682, RADIALSEAL DONALDSON EPG15" AIR CLEANER : 13.08" (332 mm) ID: 6.78" (172 mm) : 14.76" (375 mm) P JOHN DEERE AM30800 : 4.39" (112 mm) ID: 3.00" (76 mm) : 2.34" (59 mm) P528211, SPIN ON : 3.69" (94 mm) Thread Size: 3/4-20 : 4.29" (109 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.43" (62 mm) P ONAN : 6.00" (152 mm) ID: 4.75" (121 mm) : 3.00" (76 mm) P FORD B7A9601C : 9.43" (240 mm) ID: 6.87" (174 mm) : 3.62" (92 mm) P VORTOX VF120A : 8.88" (226 mm) ID: 5.00" (127 mm) : 10.25" (260 mm) P ONAN : 4.50" (114 mm) ID: 3.00" (76 mm) : 3.34" (85 mm) P PETTER JF35/6 : 5.50" (140 mm) ID: 3.25" (83 mm) : 4.50" (114 mm) P AIR SAFETY, RADIALSEAL AIR SAFETY, RADIALSEAL : 6.89" (175 mm) ID: 5.32" (135 mm) : 14.23" (361 mm) P AIR PANEL, ENGINE GM , AC A875C Width: 4.22" (107 mm) Depth: 1.58" (40 mm) Height: 9.44" (240 mm) P AIR SAFETY FORD, DONALDSON EGB 16 A/C : 8.24" (209 mm) ID: 7.12" (181 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR PANEL, ENGINE CHRYSLER , FORD E4FZ9601A, E59Z9601A Width: 5.26" (134 mm) Depth: 10.68" (271 mm) Height: 1.65" (42 mm) Page 157

160 P AIR PANEL, ENGINE MOTORCRAFT FA1071, FA971 Width: 7.88" (200 mm) Depth: 1.54" (39 mm) Height: 7.03" (179 mm) P AIR PANEL, ENGINE FORD E5TE9601AB, MTRCRFT FA1032 Width: 7.59" (193 mm) Depth: 1.51" (38 mm) Height: 11.28" (287 mm) P IHC R2 : 6.00" (152 mm) ID: 4.75" (121 mm) : 1.88" (48 mm) P528234, CYLINDRICAL CHRYSLER : 3.30" (84 mm) ID: 1.97" (50 mm) : 3.25" (83 mm) P FARR ECO II (SHORT) : 13.50" (343 mm) ID: 7.00" (178 mm) : 18.00" (457 mm) P AIR SAFETY JOHN DEERE AR85241, DRESSER H1 : 6.39" (162 mm) ID: 5.29" (134 mm) : 17.00" (432 mm) Bolt Hole Diameter: 0.66" (17 mm) P JOHN DEERE AR85242, DRESSER H1 : 10.87" (276 mm) ID: 6.50" (165 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.62" (194 mm) P AIR SAFETY, RADIALSEAL FREIGHTLINER : 5.30" (135 mm) ID: 3.78" (96 mm) : 14.02" (356 mm) : 4.97" (126 mm) P PUROLATOR AF71 : 5.94" (151 mm) ID: 3.25" (83 mm) : 4.00" (102 mm) Bolt Hole Diameter: 0.25" (6 mm) P AIR PANEL, ENGINE BROOKS & PERKINS SWEEPERS , Width: 15.00" (381 mm) Depth: 2.19" (56 mm) Height: 20.00" (508 mm) P AIR PANEL, ENGINE BROOKS & PERKINS SWEEPERS , Width: 18.00" (457 mm) Depth: 2.19" (56 mm) Height: 20.00" (508 mm) P528708, SPECIAL VOLVO , : 3.31" (84 mm) ID: 0.98" (25 mm) : 3.66" (93 mm) P CATERPILLAR # : 22.00" (559 mm) ID: 15.64" (397 mm) : 24.00" (610 mm) Gasket ID: 17.46" (444 mm) P530300, RADIALSEAL FORD F SERIES CARGO #F3HZ9601B, MCFT FA1603 : 9.33" (237 mm) ID: 5.15" (131 mm) : 12.28" (312 mm) P DGE PICKUPS WITH CUMMINS 5.9 TURBO DIESEL : 7.98" (203 mm) ID: 4.64" (118 mm) : 9.28" (236 mm) Gasket : 6.80" (172 mm) Gasket ID: 5.60" (142 mm) Bolt Hole Diameter: 0.38" (10 mm) P BRIGGS & STRATTON : 6.90" (175 mm) ID: 5.50" (140 mm) : 2.20" (56 mm) P IHC R1,R2,R91, KOHLER 23048,TECUMSEH : 4.39" (112 mm) ID: 3.00" (76 mm) : 1.56" (40 mm) Page 158

161 P TECUMSEH 35066, DEERE AM100137, GRAVELY : 4.25" (108 mm) ID: 2.00" (51 mm) : 6.14" (156 mm) P KOHLER , IHC 11721C1 : 6.98" (177 mm) ID: 5.58" (142 mm) : 1.84" (47 mm) P DEERE M47494, KOHLER : 6.92" (176 mm) ID: 5.50" (140 mm) : 2.55" (65 mm) P AIR OIL SEPARATOR SULLAIR , : 8.37" (213 mm) ID: 5.25" (133 mm) : 11.00" (279 mm) Flange Diameter: 10.66" (271 mm) P AIR OIL SEPARATOR GARDNER DENVER : 8.38" (213 mm) ID: 5.88" (149 mm) : 9.50" (241 mm) Flange Diameter: 10.00" (254 mm) P AIR OIL SEPARATOR INGERSOLL RAND , , : 14.88" (378 mm) ID: 11.40" (290 mm) : 16.75" (425 mm) Flange Diameter: 17.12" (435 mm) P KOHLER : 6.02" (153 mm) ID: 4.61" (117 mm) : 4.06" (103 mm) P AIR OIL SEPARATOR CHICAGO PNEUMATIC N : 7.50" (190 mm) ID: 5.50" (140 mm) : 9.94" (252 mm) P ONAN , VOLKSWAGEN : 8.00" (203 mm) ID: 6.50" (165 mm) : 2.17" (55 mm) P ONAN : 3.87" (98 mm) ID: 2.73" (69 mm) : 3.12" (79 mm) P530866, KONEPAC JEFFREY DRESSER 4110 RAMCAR EXH FILTER : 12.75" (324 mm) ID: 8.32" (211 mm) : 23.99" (609 mm) Gasket : 9.81" (249 mm) Gasket ID: 5.38" (137 mm) P AIR PANEL, ENGINE TENNANT 04600, Width: 20.00" (508 mm) Depth: 3.19" (81 mm) Height: 30.00" (762 mm) P STIHL : 3.82" (97 mm) ID: 2.37" (60 mm) : 2.76" (70 mm) P AIR SAFETY, RADIALSEAL GM , FORD : 5.30" (135 mm) ID: 4.43" (113 mm) : 11.82" (300 mm) : 4.98" (126 mm) P AIR OIL SEPARATOR ATLAS-COPCO W/SHIELD : 10.38" (264 mm) ID: 7.88" (200 mm) : 14.25" (362 mm) Flange Diameter: 15.75" (400 mm) P532410, RADIALSEAL DONALDSON FPG06,CLARK LIFTTRUCK, 4G64 MITSUBISHI : 5.08" (129 mm) ID: 3.20" (81 mm) : 11.97" (304 mm) P532473, RADIALSEAL CATERPILLAR 6I-0273 : 11.50" (292 mm) ID: 7.19" (183 mm) : 13.00" (330 mm) Page 159

162 P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-0274 : 7.31" (186 mm) ID: 5.23" (133 mm) : 13.16" (334 mm) : 6.91" (176 mm) P532499, RADIALSEAL CATERPILLAR 6I-2499 : 9.22" (234 mm) ID: 4.61" (117 mm) : 12.00" (305 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-2500 : 4.76" (121 mm) ID: 3.25" (83 mm) : 11.56" (294 mm) : 4.46" (113 mm) P532501, RADIALSEAL CATERPILLAR 6I-2501 : 11.09" (282 mm) ID: 5.80" (147 mm) : 12.88" (327 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-2502 : 5.94" (151 mm) ID: 4.40" (112 mm) : 12.44" (316 mm) : 5.60" (142 mm) P532503, RADIALSEAL DONALDSON FRG13 A/C, CAT 6I2503 : 11.09" (282 mm) ID: 5.80" (147 mm) : 15.95" (405 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG13 A/C, CAT 6I-2504 : 5.94" (151 mm) ID: 4.40" (112 mm) : 15.51" (394 mm) : 5.60" (142 mm) P532505, RADIALSEAL CATERPILLAR 6I-2505, 1P-8482 : 12.50" (318 mm) ID: 8.21" (209 mm) : 15.02" (382 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-2506 : 8.32" (211 mm) ID: 6.20" (158 mm) : 15.18" (386 mm) : 7.89" (200 mm) P532507, RADIALSEAL CATERPILLAR 6I-2507, 6N-6444 : 12.50" (318 mm) ID: 8.20" (208 mm) : 15.02" (382 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-2508 : 8.32" (211 mm) ID: 6.20" (158 mm) : 11.72" (298 mm) : 7.89" (200 mm) P532509, RADIALSEAL CATERPILLAR 6I-2509 : 12.50" (318 mm) ID: 8.21" (209 mm) : 18.52" (470 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-2510 : 8.33" (212 mm) ID: 6.12" (155 mm) : 15.18" (386 mm) : 7.89" (200 mm) P532703, RADIALSEAL CHRYSLER : 8.02" (204 mm) ID: 4.20" (107 mm) : 9.47" (241 mm) P JOHN DEERE AH : 10.87" (276 mm) ID: 6.50" (165 mm) : 7.00" (178 mm) Gasket ID: 9.00" (229 mm) P FREIGHTLINER FLN, DONALDSON EPG11 or FRG11 HOUSING : 9.33" (237 mm) ID: 5.15" (131 mm) : 18.50" (470 mm) P533109, RADIALSEAL CATERPILLAR LIFTTRUCKS V50E, T50E : 8.18" (208 mm) ID: 4.17" (106 mm) : 6.07" (154 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 6I-1451, LIFTTRUCKS V50E, T50E : 4.27" (108 mm) ID: 2.79" (71 mm) : 5.61" (142 mm) : 4.00" (102 mm) Page 160

163 P ISUZU : 7.93" (201 mm) ID: 5.31" (135 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.90" (23 mm) P MITSUBISHI MB : 7.95" (202 mm) ID: 4.96" (126 mm) : 7.09" (180 mm) Bolt Hole Diameter: 0.51" (13 mm) P533233, FINNED KOBELCO 2446R255S5 : 6.84" (174 mm) ID: 4.23" (107 mm) : 20.00" (508 mm) Gasket ID: 5.42" (138 mm) Minor : 0.66" (17 mm) P AIR SAFETY KOBELCO 2446R255S6 : 4.84" (123 mm) ID: 3.65" (93 mm) : 19.25" (489 mm) Bolt Hole Diameter: 0.66" (17 mm) P533235, RADIALSEAL NAVISTAR C1 : 13.09" (332 mm) ID: 6.78" (172 mm) : 18.15" (461 mm) P HYSTER : 4.09" (104 mm) ID: 2.48" (63 mm) : 10.00" (254 mm) P FREIGHTLINER : 8.84" (225 mm) ID: 5.48" (139 mm) : 22.00" (559 mm) Gasket ID: 7.00" (178 mm) P KOBELCO 2446R35353 : 10.86" (276 mm) ID: 6.50" (165 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 7.29" (185 mm) P AIR PANEL, VENTILATION KOMATSU Width: 6.00" (152 mm) Depth: 2.19" (56 mm) Height: 10.00" (254 mm) P533597, FINNED JOHN DEERE AM : 4.09" (104 mm) ID: 2.48" (63 mm) : 8.00" (203 mm) Gasket ID: 2.58" (66 mm) Minor : 0.66" (17 mm) P AIR SAFETY CATERPILLAR 7C1062 : 3.78" (96 mm) ID: 2.62" (67 mm) : 10.08" (256 mm) Flange Diameter: 6.69" (170 mm) P533651, RADIALSEAL CATERPILLAR : 8.18" (208 mm) ID: 4.17" (106 mm) : 6.95" (177 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR : 4.27" (108 mm) ID: 2.72" (69 mm) : 6.49" (165 mm) P AIR SAFETY, RADIALSEAL JOHN DEERE RE34967 : 5.30" (135 mm) ID: 3.78" (96 mm) : 14.73" (374 mm) P533654, RADIALSEAL JOHN DEERE RE34966 : 9.33" (237 mm) ID: 5.15" (131 mm) : 15.15" (385 mm) P533655, RADIALSEAL JOHN DEERE RE51629 : 11.09" (282 mm) ID: 5.82" (148 mm) : 15.75" (400 mm) P AIR SAFETY, RADIALSEAL DONALDSON EPG15 AIR CLEANERS : 6.89" (175 mm) ID: 5.97" (152 mm) : 17.52" (445 mm) : 6.52" (166 mm) P AIR SAFETY, RADIALSEAL DONALDSON EPG11 AIR CLEANERS : 5.30" (135 mm) ID: 3.78" (96 mm) : 18.04" (458 mm) Page 161

164 P AIR PANEL, VENTILATION HITACHI , JOHN DEERE AT Width: 17.12" (435 mm) Depth: 2.19" (56 mm) Height: 8.46" (215 mm) P533814, RADIALSEAL FORD F6HZ9601BA, MOTORCRAFT FA1636 : 13.09" (332 mm) ID: 6.78" (172 mm) : 16.85" (428 mm) P533882, RADIALSEAL CATERPILLAR 777 ORE TRUCK, : 14.28" (363 mm) ID: 8.98" (228 mm) : 17.62" (448 mm) P AIR PANEL, ENGINE FORD E6AZ9601B Width: 6.18" (157 mm) Depth: 11.24" (285 mm) Height: 1.15" (29 mm) P AIR PANEL, ENGINE AMC Width: 6.68" (170 mm) Depth: 13.48" (342 mm) Height: 1.59" (40 mm) P MITSUBISHI ME121023, ME : 11.06" (281 mm) ID: 5.78" (15 mm) : 14.21" (361 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR 777 ORE TRUCK, : 9.09" (231 mm) ID: 7.02" (178 mm) : 17.76" (451 mm) : 8.70" (221 mm) P AIR SAFETY, RADIALSEAL DONALDSON EPG13 RADIALSEAL AIR CLEANERS : 5.94" (151 mm) ID: 5.05" (128 mm) : 14.84" (377 mm) P533930, RADIALSEAL DONALDSON EPG13 RADIALSEAL AIR CLEANERS : 11.09" (282 mm) ID: 5.80" (147 mm) : 15.15" (385 mm) P533938, RADIALSEAL FORD F6HZ9601CA, MOTORCRAFT FA1637 : 13.47" (342 mm) ID: 8.20" (208 mm) : 17.24" (438 mm) P AIR SAFETY, RADIALSEAL FORD F6HZ9602AA : 8.33" (212 mm) ID: 6.12" (155 mm) : 16.60" (422 mm) : 7.89" (200 mm) P534096, RADIALSEAL PETERBILT TRUCK, MEL 385 : 9.33" (237 mm) ID: 5.80" (147 mm) : 23.03" (585 mm) P534436, RADIALSEAL Isuzu : 11.10" (282 mm) ID: 6.77" (172 mm) : 17.80" (452 mm) P534438, RADIALSEAL EXMAN A6115A6114 : 11.09" (282 mm) ID: 6.72" (171 mm) : 16.20" (416 mm) P AIR SAFETY, RADIALSEAL ISUZU : 6.89" (175 mm) ID: 5.24" (133 mm) : 15.98" (406 mm) P534816, RADIALSEAL KENWORTH & PETERBILT CONVENTIONALS : 11.42" (290 mm) ID: 6.78" (172 mm) : 23.44" (595 mm) P AIR SAFETY, RADIALSEAL TOYOTA 17744U FLAME RETARDENT : 3.32" (84 mm) ID: 2.55" (65 mm) : 11.74" (298 mm) P534925, RADIALSEAL KENWORTH & PETERBILT CONVENTIONALS : 13.07" (332 mm) ID: 7.44" (189 mm) : 25.44" (646 mm) P AIR PANEL, VENTILATION VOLVO , Width: 7.40" (188 mm) Depth: 10.51" (267 mm) Height: 1.61" (41 mm) Page 162

165 P CATERPILLAR 4P-0710 : 19.29" (490 mm) ID: 12.93" (328 mm) : 13.84" (352 mm) Gasket ID: 16.85" (428 mm) P AIR SAFETY CATERPILLAR 4P-0711 : 12.78" (325 mm) ID: 10.14" (258 mm) : 13.81" (351 mm) P535337, FINNED HYSTER : 4.09" (104 mm) ID: 2.48" (63 mm) : 14.00" (356 mm) Gasket ID: 2.58" (66 mm) Minor : 0.66" (17 mm) P AIR SAFETY HYSTER : 2.38" (60 mm) ID: 1.87" (47 mm) : 13.00" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) P KUBOTA : 6.00" (152 mm) ID: 4.02" (102 mm) : 7.50" (190 mm) Bolt Hole Diameter: 0.62" (16 mm) P KUBOTA : 6.09" (155 mm) ID: 3.47" (88 mm) : 9.25" (235 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.15" (105 mm) P KUBOTA : 4.09" (104 mm) ID: 2.48" (63 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.27" (7 mm) P KUBOTA : 6.09" (155 mm) ID: 4.09" (104 mm) : 9.25" (235 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.50" (114 mm) P KOMATSU : 7.36" (187 mm) ID: 4.78" (121 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P AIR SAFETY JOHN DEERE AM : 2.38" (60 mm) ID: 1.91" (49 mm) : 7.00" (178 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY, RADIALSEAL JOHN DEERE M : 1.82" (46 mm) ID: 1.22" (31 mm) : 6.59" (167 mm) : 1.70" (43 mm) P EXMAN AE54090 : 6.37" (162 mm) ID: 5.43" (138 mm) : 11.96" (304 mm) Gasket ID: 5.39" (137 mm) P GASKET, COVER FOR ERA15 AIR CLEANER ACCESS COVER P HINO : 9.22" (234 mm) ID: 4.84" (123 mm) : 18.00" (457 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.25" (159 mm) P KOBELCO 2446R254S5 : 8.12" (206 mm) ID: 4.84" (123 mm) : 21.00" (533 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P NISSAN D654601D20 : 7.93" (201 mm) ID: 5.32" (135 mm) : 10.00" (254 mm) P535770, RADIALSEAL UL APPROVED VERSION OF P : 5.44" (138 mm) ID: 3.20" (81 mm) : 12.67" (322 mm) P536036, RADIALSEAL MITSUBISHI ME : 9.33" (237 mm) ID: 5.15" (131 mm) : 15.80" (401 mm) Page 163

166 P AIR PANEL, ENGINE CHEVROLET LIGHT TRUCK, GMC Width: 6.05" (154 mm) Depth: 11.56" (294 mm) Height: 1.66" (42 mm) P AIR PANEL, ENGINE GM LIGHT TRUCK Width: 7.91" (201 mm) Depth: 1.67" (42 mm) Height: 16.00" (406 mm) P AIR PANEL, ENGINE DGE LIGHT TRUCK, CHRYSLER Width: 10.75" (273 mm) Depth: 2.25" (57 mm) Height: 11.82" (300 mm) P536457, RADIALSEAL DONALDSON FRG11 AIR CLEANERS, CONSTRUCTION EQUIPMENT : 9.33" (237 mm) ID: 5.15" (131 mm) : 13.00" (330 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG11 AIR CLEANER, CAT EXCAVATORS : 5.30" (135 mm) ID: 3.78" (96 mm) : 12.74" (324 mm) P GASKET FREIGHTLINER CF, FL, FLB TRUCKS P536431, SPECIAL FORD LIGHT TRUCK, F4TZ9D695A Height: 2.78" (71 mm) : 1.28" (33 mm) Depth: 4.42" (112 mm) P536527, RADIALSEAL CASE IH T1 : 12.50" (318 mm) ID: 8.20" (208 mm) : 21.10" (536 mm) P AIR PANEL, ENGINE FORD LIGHT TRUCK, F5UZ9601A Width: 6.52" (166 mm) Depth: 1.54" (39 mm) Height: 11.25" (286 mm) P AIR SAFETY, RADIALSEAL CASE IH T1 : 8.32" (211 mm) ID: 6.20" (157 mm) : 20.81" (529 mm) : 7.89" (200 mm) P536434, OVAL FORD LIGHT TRUCK, F5TZ9601A Width: 6.04" (153 mm) Height: 2.82" (72 mm) : 7.15" (182 mm) P536577, RADIALSEAL NISSAN D6546Z9100 : 11.09" (282 mm) ID: 6.78" (172 mm) : 14.19" (360 mm) P AIR SAFETY, RADIALSEAL CHRYSLER RAM 6500 : 5.94" (151 mm) ID: 5.05" (128 mm) : 9.76" (248 mm) : 5.60" (142 mm) P536448, RADIALSEAL CHRYSLER RAM 6500 : 11.09" (282 mm) ID: 5.80" (147 mm) : 10.15" (258 mm) P536732, RADIALSEAL GM CK SERIES PICKUPS/VANS : 7.24" (184 mm) ID: 3.58" (91 mm) : 10.65" (271 mm) P536733, RADIALSEAL GM CK SERIES PICKUPS/VANS : 6.49" (165 mm) ID: 3.58" (91 mm) : 10.65" (271 mm) P536940, RADIALSEAL CASE/IH A1 : 5.44" (138 mm) ID: 3.20" (81 mm) : 15.15" (385 mm) Page 164

167 P AIR SAFETY, RADIALSEAL CASE/IH A1 : 3.32" (84 mm) ID: 2.55" (65 mm) : 14.65" (372 mm) : 3.10" (79 mm) P AIR SAFETY, RADIALSEAL NAVISTAR C1 : 6.89" (175 mm) ID: 5.89" (150 mm) : 14.23" (361 mm) P COVER GASKET P537355, RADIALSEAL DONALDSON ERA11 AIR CLNR, FRTLNR CLASSIC : 9.64" (245 mm) ID: 5.15" (131 mm) : 24.61" (625 mm) P537369, SPECIAL FORD LIGHT TRUCK Height: 1.30" (33 mm) : 2.40" (61 mm) Depth: 4.40" (112 mm) P AIR CLEANER, DISPOSABLE FARR ECOLITE 11 X 24 Body Diameter: 11.00" (279 mm) : 7.00" (178 mm) : 24.00" (610 mm) Inlet Location: 5.50" (140 mm) Inlet Diameter: 7.00" (178 mm) Inlet : 7.38" (187 mm) P AIR CLEANER, DISPOSABLE FARR ECOLITE 13.5 X 24 Body Diameter: 13.50" (343 mm) : 7.00" (178 mm) : 24.00" (610 mm) Inlet Location: 5.50" (140 mm) Inlet Diameter: 7.00" (178 mm) Inlet : 8.62" (219 mm) P AIR CLEANER, DISPOSABLE FARR ECO CM 13.5 X 24 Body Diameter: 13.50" (343 mm) : 8.00" (203 mm) : 24.00" (610 mm) Inlet Location: 5.50" (140 mm) Inlet Diameter: 7.00" (178 mm) Inlet : 11.12" (282 mm) P AIR CLEANER, DISPOSABLE FARR ECO SE 6.75 X 14 Body Diameter: 6.75" (171 mm) : 2.88" (73 mm) : 14.20" (361 mm) P GM LIGHT TRUCK : 5.75" (146 mm) ID: 3.58" (91 mm) : 5.96" (151 mm) P AIR CLEANER, DISPOSABLE FARR ECO SE 7.75 X 17 Body Diameter: 7.75" (197 mm) : 3.88" (99 mm) : 17.20" (437 mm) P AIR PANEL, ENGINE CLARK, TOWMOTOR Width: 8.38" (213 mm) Depth: 1.63" (41 mm) Height: 8.38" (213 mm) P AIR CLEANER, DISPOSABLE FARR ECO SE 9.75 X 20 Body Diameter: 9.67" (246 mm) : 5.00" (127 mm) : 20.20" (513 mm) P JOHN DEERE AT : 8.18" (208 mm) ID: 4.17" (106 mm) : 11.10" (282 mm) P AIR CLEANER, DISPOSABLE FARR ECOLITE 9.75 X 24 Body Diameter: 9.75" (248 mm) : 6.00" (152 mm) : 24.00" (610 mm) Inlet Location: 5.50" (140 mm) Inlet Diameter: 6.00" (152 mm) Inlet : 6.75" (171 mm) P AIR CLEANER, DISfPOSABLE FARR ECO SE W/SIDE INLET Body Diameter: 9.70" (246 mm) : 5.00" (127 mm) : 19.40" (493 mm) Inlet Location: 4.00" (102 mm) Inlet Diameter: 6.00" (152 mm) Inlet : 6.44" (164 mm) P AIR CLEANER, DISPOSABLE FARR ECO SM 13.5 X 15 Body Diameter: 13.50" (343 mm) : 7.00" (178 mm) : 16.80" (427 mm) Inlet Location: 5.50" (140 mm) Inlet Diameter: 7.00" (178 mm) Inlet : 8.62" (219 mm) Page 165

168 P AIR CLEANER, DISPOSABLE FARR ECO SM 13.5 X 15 Body Diameter: 13.50" (343 mm) : 7.00" (178 mm) : 16.80" (427 mm) Inlet Location: 9.50" (241 mm) Outlet Diameter: 7.00" (178 mm) Inlet : 8.62" (219 mm) P GASKET, COVER DONALDSON FRG13 COVER GASKET P AIR SAFETY, RADIALSEAL JOHN DEERE AT : 4.27" (108 mm) ID: 3.45" (88 mm) : 10.64" (270 mm) : 4.00" (102 mm) P537729, RADIALSEAL GM : 7.50" (190 mm) ID: 3.58" (91 mm) : 10.65" (271 mm) P537778, RADIALSEAL CASE IH A1 : 11.09" (282 mm) ID: 5.80" (147 mm) : 21.15" (537 mm) P AIR SAFETY, RADIALSEAL CASE IH A1 : 5.94" (151 mm) ID: 4.40" (112 mm) : 20.88" (530 mm) : 5.60" (142 mm) P537791, KONEPAC DONALDSON SHORT ECG11 KONEPAC- STANDARD : 10.62" (270 mm) ID: 6.69" (170 mm) : 22.02" (559 mm) Gasket : 9.21" (234 mm) Gasket ID: 5.22" (133 mm) P537876, RADIALSEAL CASE IH A1, LINK BELT E3H0146 : 11.09" (282 mm) ID: 5.82" (148 mm) : 20.08" (510 mm) P AIR SAFETY, RADIALSEAL CASE IH A1, LINK BELT E3H0147 : 5.94" (151 mm) ID: 4.39" (112 mm) : 19.02" (483 mm) : 5.60" (142 mm) P538007, RADIALSEAL CATERPILLAR D11N, : 14.28" (363 mm) ID: 8.98" (228 mm) : 15.03" (382 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR D11N : 9.09" (231 mm) ID: 7.02" (178 mm) : 15.17" (385 mm) : 8.70" (221 mm) P JOHN DEERE AL65051 : 5.25" (133 mm) ID: 3.26" (83 mm) : 12.00" (305 mm) P538392, RADIALSEAL JOHN DEERE AT : 9.33" (237 mm) ID: 5.15" (131 mm) : 21.50" (546 mm) P AIR SAFETY, RADIALSEAL JOHN DEERE AT : 5.30" (135 mm) ID: 3.70" (94 mm) : 21.21" (539 mm) : 4.98" (126 mm) P AIR MAZE CD : 10.00" (254 mm) ID: 5.88" (149 mm) : 17.06" (433 mm) Bolt Hole Diameter: 0.39" (10 mm) P AIR SAFETY AIR MAZE CD : 5.68" (144 mm) ID: 4.94" (125 mm) : 15.56" (395 mm) Bolt Hole Diameter: 0.64" (16 mm) P AIR SAFETY, RADIALSEAL JOHN DEERE RE51630 : 5.94" (151 mm) ID: 4.39" (112 mm) : 14.84" (377 mm) : 5.60" (142 mm) P AIR SAFETY, RADIALSEAL FREIGHTLINER FLN SERIES WITH EPG11 HOUSING : 5.30" (135 mm) ID: 4.43" (113 mm) : 18.03" (458 mm) Page 166

169 P AIR OIL SEPARATOR INGERSOLL RAND : 4.88" (124 mm) ID: 3.25" (83 mm) : 12.12" (308 mm) Flange Diameter: 7.00" (178 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 8.75" (222 mm) ID: 5.88" (149 mm) : 13.49" (343 mm) Flange Diameter: 11.75" (298 mm) P AIR SAFETY JOHN DEERE AL67195 : 3.62" (92 mm) ID: 2.99" (76 mm) : 9.25" (235 mm) P LEROI H43651 : 4.42" (112 mm) ID: 2.98" (76 mm) : 4.74" (120 mm) P VOLVO : 14.38" (365 mm) ID: 8.26" (210 mm) : 16.69" (424 mm) Bolt Hole Diameter: 0.40" (10 mm) P TOWMOTOR : 6.69" (170 mm) ID: 5.04" (128 mm) : 3.00" (76 mm) P DEUTZ : 6.46" (164 mm) ID: 3.38" (86 mm) : 7.95" (202 mm) P539468, SPIN ON FIAT-ALLIS : 3.73" (95 mm) Thread Size: 3/4-14 : 3.75" (95 mm) P ISUZU : 6.06" (154 mm) ID: 3.14" (80 mm) : 7.81" (198 mm) Bolt Hole Diameter: 0.56" (14 mm) P METROPLEX M : 12.08" (307 mm) ID: 7.73" (196 mm) : 21.07" (535 mm) P STEIGER T1 : 9.21" (234 mm) ID: 5.87" (149 mm) : 17.54" (446 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY STEIGER T1 : 5.56" (141 mm) ID: 4.42" (112 mm) : 15.61" (397 mm) Bolt Hole Diameter: 0.65" (17 mm) P SULLAIR : 6.70" (170 mm) ID: 3.68" (93 mm) : 11.04" (280 mm) Bolt Hole Diameter: 0.48" (12 mm) P TOYOTA : 7.38" (187 mm) ID: 4.34" (110 mm) : 2.70" (69 mm) P AIR SAFETY TEREX : 10.88" (276 mm) ID: 8.16" (207 mm) : 18.09" (459 mm) Bolt Hole Diameter: 0.90" (23 mm) P ISUZU : 5.80" (147 mm) ID: 3.51" (89 mm) : 10.06" (256 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.62" (117 mm) P AIR SAFETY MITSUBISHI MEO33773 : 5.21" (132 mm) ID: 4.16" (106 mm) : 11.88" (302 mm) Bolt Hole Diameter: 0.66" (17 mm) P CASE IH A17741 : 12.00" (305 mm) ID: 7.32" (186 mm) : 10.76" (273 mm) Page 167

170 P AIR SAFETY CASE IH C1 : 7.21" (183 mm) ID: 5.66" (144 mm) : 14.49" (368 mm) Bolt Hole Diameter: 0.67" (17 mm) P GM : 10.40" (264 mm) ID: 6.05" (154 mm) : 7.91" (201 mm) P539765, RADIALSEAL NAVISTAR C1 : 9.64" (245 mm) ID: 5.15" (131 mm) : 23.26" (591 mm) P AIR SAFETY, RADIALSEAL UL APPROVED VERSION OF P : 3.32" (84 mm) ID: 2.55" (65 mm) : 12.38" (314 mm) P542753, RADIALSEAL PETERBILT, DONALDSON ERA13 : 11.40" (290 mm) ID: 6.78" (172 mm) : 21.19" (538 mm) P AIR PANEL, VENTILATION CATERPILLAR 8C-9657 Width: 6.00" (152 mm) Depth: 2.31" (59 mm) Height: 17.53" (445 mm) P540388, RADIALSEAL VOLVO : 13.09" (332 mm) ID: 7.69" (195 mm) : 15.94" (405 mm) P AIR PANEL, VENTILATION General X X 2.19 Vent Panel Width: 10.82" (275 mm) Depth: 2.19" (56 mm) Height: 10.82" (275 mm) P543614, RADIALSEAL ISUZU : 9.33" (237 mm) ID: 5.15" (131 mm) : 10.91" (277 mm) P AIR SAFETY HITACHI : 5.25" (133 mm) ID: 4.13" (105 mm) : 9.33" (237 mm) P G : 13.09" (332 mm) ID: 6.78" (172 mm) : 14.76" (375 mm) P AIR SAFETY JOHN DEERE AL27160 : 3.36" (85 mm) ID: 2.90" (74 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.66" (17 mm) P541857, FINNED CASE R2 : 6.08" (154 mm) ID: 3.49" (89 mm) : 11.00" (279 mm) Gasket : 0.66" (17 mm) Gasket ID: 4.45" (113 mm) Minor : 0.66" (17 mm) P AIR SAFETY KOBELCO 2446R277S6 : 4.84" (123 mm) ID: 3.65" (93 mm) : 15.25" (387 mm) Bolt Hole Diameter: 0.66" (17 mm) P HITACHI : 6.10" (155 mm) ID: 4.09" (104 mm) : 12.50" (318 mm) Bolt Hole Diameter: 0.67" (17 mm) Gasket ID: 7.87" (200 mm) P544243, RADIALSEAL PETERBILT, DONALDSON ERA15 : 13.06" (332 mm) ID: 7.44" (189 mm) : 21.38" (543 mm) P544301, RADIALSEAL DONALDSON ERA15 RADIAL SEAL AIRCLEANER : 12.76" (324 mm) ID: 7.40" (188 mm) : 25.51" (648 mm) P AIR SECONDARY FREIGHTLINER M2 SERIES : 9.03" (229 mm) : 1.00" (25 mm) Page 168

171 P544741, RADIALSEAL DONALDSON ERA11 RADIAL SEAL AIRCLEANER : 9.64" (245 mm) ID: 5.15" (131 mm) : 21.42" (544 mm) P ECG 11" AIR CLEANER ASSEMBLY : 10.62" (270 mm) ID: 6.61" (168 mm) : 20.04" (509 mm) P544950, RADIALSEAL DONALDSON ERA13 RADIAL SEAL AIRCLEANER : 11.40" (290 mm) ID: 5.82" (148 mm) : 22.96" (583 mm) P AIR SAFETY AIR MAZE CD : 7.38" (187 mm) ID: 6.12" (155 mm) : 25.38" (645 mm) Bolt Hole Diameter: 0.64" (16 mm) P AIR MAZE CD : 12.56" (319 mm) ID: 7.51" (191 mm) : 26.81" (681 mm) Bolt Hole Diameter: 0.39" (10 mm) P CATERPILLAR , MITSUBISH : 4.17" (106 mm) ID: 2.27" (58 mm) : 8.97" (228 mm) P MITSUBISHI ME : 9.14" (232 mm) ID: 5.78" (147 mm) : 17.16" (436 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 6.25" (159 mm) P546566, FINNED JOHN DEERE RE45827, NEW HOLLAND : 6.08" (154 mm) ID: 3.47" (88 mm) : 13.00" (330 mm) Minor : 0.66" (17 mm) P GARDNER DENVER EQUIPMENT : 8.51" (216 mm) ID: 5.37" (136 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.44" (11 mm) P AIR PANEL, ENGINE MOTORCRAFT FA1680 Width: 13.35" (339 mm) Depth: 2.28" (58 mm) Height: 7.25" (184 mm) P AIR MAZE CD : 13.88" (353 mm) ID: 9.95" (253 mm) : 29.00" (737 mm) Bolt Hole Diameter: 0.52" (13 mm) P AIR SAFETY AIR MAZE CD : 9.88" (251 mm) ID: 8.06" (205 mm) : 27.75" (705 mm) Bolt Hole Diameter: 0.52" (13 mm) P547331, RADIALSEAL CASE IH A1 : 8.18" (208 mm) ID: 4.17" (106 mm) : 15.09" (383 mm) P AIR SAFETY FREIGHTLINER M2 WITH 12" POWERCORE : 9.37" (238 mm) : 1.50" (38 mm) P FORD LIGHT TRUCK : 8.13" (207 mm) ID: 4.26" (108 mm) : 7.81" (198 mm) P548900, RADIALSEAL CASE IH A1 : 13.09" (332 mm) ID: 6.78" (172 mm) : 21.86" (555 mm) P FORD LIGHT TRUCK : 6.87" (174 mm) ID: 3.15" (80 mm) : 7.90" (201 mm) P AIR SAFETY, RADIALSEAL CASE A1 : 6.89" (175 mm) ID: 5.24" (133 mm) : 21.33" (542 mm) Page 169

172 P AIR PANEL, ENGINE CHEVROLET SILVERADO , AF1518 Width: 12.31" (313 mm) Depth: 2.31" (59 mm) Height: 9.75" (248 mm) P AIR PANEL, ENGINE FORD LIGHT TRUCK, AF1658 Width: 8.75" (222 mm) Depth: 2.26" (57 mm) Height: 7.52" (191 mm) P549271, RADIALSEAL DONALDSON FRG06 AIR CLEANER : 5.28" (134 mm) ID: 3.42" (87 mm) : 15.00" (381 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG06 AIR CLEANER : 3.57" (91 mm) ID: 2.80" (71 mm) : 14.65" (372 mm) P549523, RADIALSEAL DONALDSON FRG16 AIR CLEANER : 12.09" (307 mm) ID: 6.78" (172 mm) : 17.99" (457 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG16 AIR CLEANER : 6.89" (175 mm) ID: 5.24" (133 mm) : 17.83" (453 mm) P FUEL CARTRIDGE PRIMARY IHC, DGE, FORD, JEEP, MELROE : 1.39" (35 mm) ID: 0.50" (13 mm) : 1.88" (48 mm) Efficiency 99%: 22 Micron P LUBE SPIN-ON FULL FLOW FORD, MOTORCRAFT FL1A : 3.66" (93 mm) Thread Size: 3/4-16 : 5.35" (136 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW HINO : 4.09" (104 mm) ID: 1.92" (49 mm) : 6.30" (160 mm) Efficiency 50%: 20 Micron P FUEL IN-LINE PICKUPS AND CARS -- UNIVERSAL 5/16" 2 HOSES 4 CLAMPS : 1.94" (49 mm) Inlet Size: 5/16 Overall : 4.17" (106 mm) : 2.36" (60 mm) Outlet Size: 5/16 Efficiency 99%: 40 Micron P LUBE CARTRIDGE FULL FLOW ISUZU : 3.31" (84 mm) ID: 0.65" (17 mm) : 5.63" (143 mm) Efficiency 50%: 16 Micron P549644, RADIALSEAL KENWORTH T2000 FROM 11/98 : 11.09" (282 mm) ID: 6.78" (172 mm) : 15.15" (385 mm) P FUEL SPIN-ON PRIMARY Renault : 3.78" (96 mm) Thread Size: M18 x 1.5 : 5.59" (142 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) P LUBE SPIN-ON FULL FLOW MERCEDES, RVI : 3.66" (93 mm) Thread Size: 3/4-16 : 5.87" (149 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.44" (62 mm) P FUEL IN-LINE FORD D7TE9155A, MOTORCRAFT FG778 (1 HOSE 2 CLAMPS INCLUDED) : 1.33" (34 mm) Inlet Size: 5/16 Overall : 2.71" (69 mm) Body : 0.94" (24 mm) Outlet Size: 1/8-27 Efficiency 99%: 100 Micron P LUBE CARTRIDGE FULL FLOW ISUZU : 4.17" (106 mm) ID: 0.59" (15 mm) : 4.17" (106 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE FULL FLOW ISUZU : 4.17" (106 mm) ID: 0.59" (15 mm) : 7.30" (185 mm) Efficiency 50%: 16 Micron Page 170

173 P LUBE SPIN-ON FULL FLOW JOHN DEERE AR58956, T19044 : 3.81" (97 mm) Thread Size: 13/16-16 : 5.53" (140 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 40 Micron P LUBE CARTRIDGE FULL FLOW NISSAN : 5.04" (128 mm) ID: 0.61" (15 mm) : 6.30" (160 mm) Efficiency 50%: 25 Micron P FUEL CARTRIDGE PRIMARY NISSAN : 3.62" (92 mm) ID: 0.59" (15 mm) : 5.31" (135 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW ALLIS CHALMERS, CASE, IHC : 3.81" (97 mm) Thread Size: 13/16-16 : 5.22" (133 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW GMC 6CYL. & V8 GAS : 3.81" (97 mm) Thread Size: 13/16-16 : 4.22" (107 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Efficiency 99%: 40 Micron P FUEL CARTRIDGE PRIMARY ISUZU : 2.91" (74 mm) ID: 0.63" (16 mm) : 4.15" (106 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY NISSAN : 4.37" (111 mm) ID: 0.59" (15 mm) : 5.51" (140 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE SOCK DETROIT DIESEL : 5.50" (140 mm) ID: 2.46" (62 mm) : 10.00" (254 mm) Efficiency 99%: 40 Micron P LUBE CARTRIDGE FULL FLOW NISSAN : 5.12" (130 mm) ID: 0.59" (15 mm) : 9.17" (233 mm) Efficiency 50%: 5 Micron P LUBE SPIN-ON FULL FLOW GM, ACPF35 : 3.81" (97 mm) Thread Size: 13/16-16 : 5.12" (130 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Efficiency 50%: 20 Micron P MITSUBISHI : 4.47" (114 mm) ID: 2.87" (73 mm) : 14.72" (374 mm) Efficiency Beta 2: 25 Micron P FUEL CARTRIDGE PRIMARY HINO : 2.44" (62 mm) ID: 0.43" (11 mm) : 2.36" (60 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY HITACHI : 2.80" (71 mm) ID: 0.59" (15 mm) : 3.93" (100 mm) P FUEL CARTRIDGE PRIMARY HITACHI , ISUZU : 3.53" (90 mm) ID: 0.57" (14 mm) : 5.31" (135 mm) Efficiency 50%: 5 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES BENZ , M.A.N. : 4.76" (121 mm) ID: 2.20" (56 mm) : 9.60" (244 mm) Overall : 10.44" (265 mm) Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY ISUZU : 4.00" (102 mm) ID: 0.57" (14 mm) : 6.32" (161 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY CUMMINS, HOUGH, MICH , : 5.81" (148 mm) ID: 1.00" (25 mm) : 9.37" (238 mm) ID Width: 1.77" (45 mm) Efficiency 99%: 20 Micron Page 171

174 P FUEL CARTRIDGE PRIMARY MITSUBISHI : 3.54" (90 mm) ID: 0.57" (14 mm) : 5.52" (140 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW AMC, GMC : 3.00" (76 mm) Thread Size: M18 x 1.5 : 3.40" (86 mm) Relief Valve Setting: 7-9 PSI ( Bar) Gasket : 2.76" (70 mm) Gasket ID: 2.39" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI ME : 3.74" (95 mm) Thread Size: M20 x 1.5 : 3.15" (80 mm) Gasket : 2.52" (64 mm) Gasket ID: 2.28" (58 mm) Efficiency 99%: 30 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI ME : 3.68" (93 mm) Thread Size: M20 x 1.5 : 3.94" (100 mm) Gasket : 2.54" (65 mm) Gasket ID: 2.28" (58 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON BYPASS CAT, AMC, MF, ALLIS : 3.81" (97 mm) Thread Size: 5/8-18 : 5.22" (133 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 45 Micron P LUBE SPIN-ON FULL FLOW GMC : 3.00" (76 mm) Thread Size: M18 x 1.5 : 5.09" (129 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.39" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P LUBE CARTRIDGE FULL FLOW MASSEY FERGUSON M91, M1, M91 : 2.85" (72 mm) ID: 1.30" (33 mm) : 5.39" (137 mm) P FUEL CARTRIDGE PRIMARY MITSUBISHI ME : 3.62" (92 mm) ID: 0.59" (15 mm) : 4.33" (110 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY NISSAN : 3.61" (92 mm) ID: 0.59" (15 mm) : 5.28" (134 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY NISSAN : 2.83" (72 mm) ID: 0.43" (11 mm) : 3.54" (90 mm) Efficiency 99%: 30 Micron P FUEL SPIN-ON PRIMARY TOYOTA : 3.30" (84 mm) Thread Size: 3/4-16 : 3.39" (86 mm) Gasket : 2.50" (64 mm) Gasket ID: 2.11" (54 mm) Efficiency 99%: 25 Micron P LUBE CARTRIDGE HINO : 4.81" (122 mm) ID: 0.66" (17 mm) : 8.86" (225 mm) P LUBE CARTRIDGE FULL FLOW HITACHI : 4.10" (104 mm) ID: 0.59" (15 mm) : 9.13" (232 mm) Efficiency 50%: 16 Micron P FUEL CARTRIDGE PRIMARY DEUTZ, ATLAS COPCO (Pleated Paper) : 2.60" (66 mm) ID: 0.55" (14 mm) : 4.30" (109 mm) Efficiency 99%: 9 Micron P FUEL CARTRIDGE PRIMARY DEUTZ : 3.30" (84 mm) ID: 0.53" (13 mm) : 5.30" (135 mm) P LUBE CARTRIDGE FULL FLOW HITACHI : 4.09" (104 mm) ID: 0.59" (15 mm) : 5.67" (144 mm) Efficiency 50%: 16 Micron P LUBE CARTRIDGE KIT MITSUBISHI ME : 5.12" (130 mm) ID: 0.59" (15 mm) : 11.79" (299 mm) Efficiency 99%: 48 Micron Page 172

175 P LUBE CARTRIDGE FULL FLOW MITSUBISHI : 5.02" (128 mm) ID: 2.26" (57 mm) : 5.59" (142 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW MITSUBISHI ME014833, ME : 4.20" (107 mm) Thread Size: M20 x 1.5 : 4.98" (126 mm) Gasket : 3.90" (99 mm) Gasket ID: 3.46" (88 mm) Efficiency 50%: 16 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI ME : 3.98" (101 mm) ID: 1.10" (28 mm) : 9.25" (235 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI ME : 3.98" (101 mm) ID: 1.22" (31 mm) : 7.64" (194 mm) P LUBE CARTRIDGE NISSAN : 3.82" (97 mm) ID: 1.73" (44 mm) : 5.74" (146 mm) P LUBE CARTRIDGE FULL FLOW NISSAN : 3.94" (100 mm) ID: 1.73" (44 mm) : 7.24" (184 mm) Efficiency 50%: 16 Micron P LUBE SPIN-ON FULL FLOW TOYOTA : 3.31" (84 mm) Thread Size: 3/4-16 : 4.92" (125 mm) Gasket : 2.47" (63 mm) Gasket ID: 2.25" (57 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P IHC C1 : 4.51" (115 mm) ID: 2.30" (58 mm) : 9.02" (229 mm) Efficiency Beta 2: 3 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI ME : 3.98" (101 mm) ID: 0.65" (17 mm) : 7.68" (195 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE FULL FLOW HINO : 4.09" (104 mm) ID: 1.26" (32 mm) : 6.69" (170 mm) Efficiency 50%: 16 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI ME : 4.57" (116 mm) ID: 2.12" (54 mm) : 12.68" (322 mm) Efficiency 50%: 25 Micron P LUBE SPIN-ON FULL FLOW NISSAN Z9001 : 4.50" (114 mm) Thread Size: 1 1/8-16 : 8.50" (216 mm) Gasket : 3.34" (85 mm) Gasket ID: 2.95" (75 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE NISSAN Z9029 : 3.89" (99 mm) ID: 0.66" (17 mm) : 5.67" (144 mm) P FUEL SPIN-ON PRIMARY BEDFORD : 3.31" (84 mm) Thread Size: M16 x 1.5 : 3.89" (99 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.47" (63 mm) P KOMATSU DOZERS D50A, 53A, 58-1, P-17 : 2.56" (65 mm) ID: 1.00" (25 mm) : 10.94" (278 mm) Efficiency Beta 75: 25 Micron P KOMATSU : 4.41" (112 mm) ID: 2.76" (70 mm) : 11.50" (292 mm) Efficiency Beta 75: 25 Micron Page 173

176 P KOMATSU , WHEEL LOADERS : 4.22" (107 mm) ID: 1.78" (45 mm) : 9.00" (229 mm) Efficiency Beta 75: 30 Micron P KOMATSU : 2.56" (65 mm) ID: 1.07" (27 mm) : 5.62" (143 mm) Efficiency Beta 2: 12 Micron P LUBE SPIN-ON FULL FLOW KOMATSU : 4.26" (108 mm) Thread Size: 1 1/8-16 : 6.57" (167 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW KOMATSU : 5.04" (128 mm) ID: 2.22" (56 mm) : 9.10" (231 mm) P FUEL/WATER SEPARATOR SPIN-ON FORD 6.6L & 7.8L ENG #E7HZ4N184A, RACOR R26P : 3.75" (95 mm) Thread Size: 1-14 : 4.12" (105 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY DETROIT DIESEL 8.2L ENG, FORD TRK & BUS : 3.81" (97 mm) Thread Size: 1-12 : 4.25" (108 mm) Gasket : 3.55" (90 mm) Gasket ID: 3.18" (81 mm) Efficiency 50%: 25 Micron P FUEL IN-LINE FORD, GMC -- 2 HOSES 4 CLAMPS INCLUDED : 1.94" (49 mm) Inlet Size: 3/8 Hose, 10 Hose Overall : 3.88" (99 mm) Outlet Size: 3/8 Hose, 10 Hose Efficiency 99%: 22 Micron P FUEL IN-LINE FORD, MOTORCRAFT FG HOSE 2 CLAMPS INCLUDED : 1.06" (27 mm) Inlet Size: 5/16 Overall : 2.86" (73 mm) Outlet Size: 1/8-27 Efficiency 99%: 100 Micron P LUBE CARTRIDGE FULL FLOW AC, CASE, CAT, CLARK, FTGD LF503 : 3.75" (95 mm) ID: 1.04" (26 mm) : 5.94" (151 mm) Efficiency 99%: 25 Micron P FUEL IN-LINE UNIVERSAL 1/4" O.D. LINES, : 1.94" (49 mm) Inlet Size: 0.25" (6 mm) Overall : 4.06" (103 mm) Outlet Size: 0.25" (6 mm) Efficiency 99%: 22 Micron P LUBE SPIN-ON FULL FLOW FORD, ONAN : 3.81" (97 mm) Thread Size: 3/4-16 : 3.72" (95 mm) Relief Valve Setting: 8-11 PSI ( Bar) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 36 Micron P FUEL SPIN-ON PRIMARY CUMMINS : 3.81" (97 mm) Thread Size: 1-14 : 4.22" (107 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY CUMMINS : 3.66" (93 mm) Thread Size: 1-14 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY CUMMINS D156172, , FURN GSKT- P : 3.81" (97 mm) Thread Size: 1-14 : 7.40" (188 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY JOHN DEERE AR45098, AR45097 : 3.69" (94 mm) Thread Size: 1-14 : 5.68" (144 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency 50%: 25 Micron P FUEL SPIN-ON PRIMARY FORD D3HE9176AA : 3.81" (97 mm) Thread Size: 1-14 : 5.70" (145 mm) Page 174

177 P FUEL SPIN-ON SECONDARY CASE A39867 : 3.81" (97 mm) Thread Size: 15/16-16 : 4.75" (121 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 8 Micron P FUEL SPIN-ON PRIMARY FUEL DISPENSING PUMPS : 3.69" (94 mm) Thread Size: 1-12 : 5.37" (136 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency 99%: 45 Micron P LUBE CARTRIDGE CLARK EUCLID GMC (MILITARY SEN.) : 4.02" (102 mm) ID: 0.55" (14 mm) : 8.00" (203 mm) Efficiency 99%: 20 Micron P FUEL CARTRIDGE PRIMARY MANN BF700X : 2.59" (66 mm) ID: 0.62" (16 mm) : 4.47" (114 mm) Efficiency 99%: 20 Micron P CASE D43800, D43801 : 2.63" (67 mm) ID: 1.25" (32 mm) : 7.25" (184 mm) P GRESEN 3294 : 4.50" (114 mm) ID: 1.78" (45 mm) : 7.00" (178 mm) Efficiency Beta 2: 26 Micron P IHC C91 : 4.51" (115 mm) ID: 2.30" (58 mm) : 7.04" (179 mm) Efficiency Beta 2: 20 Micron P LUBE CARTRIDGE FULL FLOW JOY, GMC , : 3.56" (90 mm) ID: 1.28" (33 mm) : 5.69" (145 mm) Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY CUMMINS , : 4.64" (118 mm) ID: 0.87" (22 mm) : 8.39" (213 mm) Efficiency 99%: 20 Micron P FUEL IN-LINE FORD E3FZ9155C : 2.90" (74 mm) Inlet Size: 5/16 Overall : 5.82" (148 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL SPIN-ON PRIMARY KUBOTA : 3.00" (76 mm) Thread Size: M20 x 1.5 : 3.40" (86 mm) Gasket : 2.70" (69 mm) Gasket ID: 2.33" (59 mm) Efficiency 99%: 17 Micron P IHC R2, R92 : 5.00" (127 mm) ID: 3.00" (76 mm) : 3.00" (76 mm) P LUBE CARTRIDGE FULL FLOW DET. DIESEL ENG W/CARTRIDGE LUBE : 4.30" (109 mm) ID: 1.45" (37 mm) : 8.90" (226 mm) Efficiency 99%: 30 Micron P LUBE CARTRIDGE SOCK GMC : 4.38" (111 mm) ID: 1.44" (37 mm) : 5.75" (146 mm) Efficiency 99%: 40 Micron P HYDRAULIC SPIN-ON UCC MX : 5.04" (128 mm) Thread Size: 1 1/4-BSP : 7.00" (178 mm) Gasket : 4.27" (108 mm) Gasket ID: 3.91" (99 mm) Efficiency Beta 2: 10 Micron P LUBE SPIN-ON FULL FLOW FIAT ALLIS, A.CHALMERS : 4.28" (109 mm) Thread Size: 1-16 : 5.78" (147 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 99%: 40 Micron P LUBE SPIN-ON BYPASS IHC R1 : 3.73" (95 mm) Thread Size: 5/8-18 : 4.31" (109 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 45 Micron Page 175

178 P LUBE SPIN-ON FULL FLOW FORD EDNN6714AA : 5.56" (141 mm) Thread Size: 1 1/8-16 : 6.00" (152 mm) Gasket : 4.37" (111 mm) Gasket ID: 3.97" (101 mm) P LUBE SPIN-ON FULL FLOW FORD E3TZ6731C : 3.81" (97 mm) Thread Size: M20 x 1.5 : 3.70" (94 mm) Relief Valve Setting: 8-11 PSI ( Bar) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 27 Micron P HYDRAULIC/LUBE SPIN-ON IHC C1 : 3.81" (97 mm) Thread Size: 13/16-16 : 4.22" (107 mm) Relief Valve Setting: 8-11 PSI ( Bar) P LUBE SPIN-ON FULL FLOW ISUZU, HONDA : 3.18" (81 mm) Thread Size: M20 x 1.5 : 3.39" (86 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.50" (64 mm) Gasket ID: 2.11" (54 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 39 Micron P LUBE CARTRIDGE FULL FLOW CAT, LINK BELT 9F6742, LEROI : 3.11" (79 mm) ID: 1.38" (35 mm) : 9.04" (230 mm) P LUBE SPIN-ON FULL FLOW ONAN : 3.67" (93 mm) Thread Size: M22 x 1.5 : 5.42" (138 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 45 Micron P LUBE CARTRIDGE FRAM F4 : 4.00" (102 mm) ID: 0.56" (14 mm) : 5.00" (127 mm) P LUBE CARTRIDGE FRAM F21 : 4.00" (102 mm) ID: 0.56" (14 mm) : 5.00" (127 mm) P LUBE SPIN-ON FULL FLOW CHRYSLER : 3.67" (93 mm) Thread Size: M20 x 1.5 : 3.16" (80 mm) Relief Valve Setting: 8-10 PSI ( Bar) Gasket : 2.63" (67 mm) Anti Drain Valve: Yes Y/N P LUBE CARTRIDGE FULL FLOW IHC R91 : 4.59" (117 mm) ID: 2.25" (57 mm) : 7.00" (178 mm) Efficiency 99%: 18 Micron P LUBE CARTRIDGE CASE 08152AB : 3.52" (89 mm) ID: 0.69" (18 mm) : 4.16" (106 mm) Efficiency 50%: 10 Micron P LUBE CARTRIDGE IHC R91 : 3.26" (83 mm) ID: 0.48" (12 mm) : 7.58" (193 mm) Efficiency 99%: 20 Micron P LUBE CARTRIDGE FULL FLOW FORD E1ADKN18662A : 2.75" (70 mm) ID: 1.31" (33 mm) : 6.00" (152 mm) Efficiency 99%: 36 Micron P LUBE CARTRIDGE FULL FLOW FORD A730X6731TA : 2.83" (72 mm) ID: 0.83" (21 mm) : 4.47" (114 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW MASSEY FERGUSON M1 : 3.82" (97 mm) ID: 1.35" (34 mm) : 4.41" (112 mm) Efficiency 50%: 20 Micron Page 176

179 P LUBE CARTRIDGE IHC R91 : 3.47" (89 mm) ID: 0.94" (24 mm) : 5.53" (141 mm) Efficiency 99%: 20 Micron P LUBE SPIN-ON FULL FLOW CUMMINS : 5.44" (138 mm) Thread Size: 13/16-16 : 5.44" (138 mm) Relief Valve Setting: 8-10 PSI ( Bar) Efficiency 99%: 45 Micron P HYDRAULIC/LUBE SPIN-ON JOHN DEERE AM39653 : 3.88" (99 mm) Thread Size: 3/4-16 : 3.80" (97 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 10 Micron P HILCO PL718-5 : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Efficiency Beta 75: 17 Micron P LUBE CARTRIDGE FULL FLOW GMC , AC PF166 : 3.56" (90 mm) ID: 1.28" (33 mm) : 8.44" (214 mm) Efficiency 99%: 36 Micron P HILCO PL : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Efficiency Beta 75: 25 Micron P LUBE SPIN-ON FULL FLOW WISCONSIN RV38 : 3.81" (97 mm) Thread Size: 5/8-18 : 5.68" (144 mm) Relief Valve Setting: PSI ( Bar) P FUEL CARTRIDGE SECONDARY MACK 237-GB-28 : 3.19" (81 mm) ID: 1.06" (27 mm) : 4.53" (115 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY CUMMINS : 4.66" (118 mm) Thread Size: 1 1/4-12 : 10.24" (260 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 9 Micron P LUBE CARTRIDGE FULL FLOW FIAT ALLIS, CASE, CLARK, MF, HYSTER,GALION : 3.91" (99 mm) ID: 0.57" (15 mm) : 4.37" (111 mm) Efficiency 99%: 20 Micron P FUEL IN-LINE GM Light Truck : 2.17" (55 mm) Inlet Size: M16 x 1.5 Overall : 4.29" (109 mm) : 3.09" (78 mm) Outlet Size: M16 x 1.5 Efficiency 50%: 23 Micron P FUEL CARTRIDGE PRIMARY CLARK, GMC, IHC, AUTO, PICKUP : 2.14" (54 mm) ID: 0.44" (11 mm) : 3.47" (88 mm) Efficiency 99%: 20 Micron P FUEL SPIN-ON PRIMARY WATER ABSORBING, FUEL DISPENSING PUMPS : 3.69" (94 mm) Thread Size: 1-12 : 5.37" (136 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 22 Micron P HILCO PL-718 : 6.00" (152 mm) ID: 2.60" (66 mm) : 18.00" (457 mm) Efficiency Beta 2: 25 Micron P FUEL SPIN-ON SECONDARY MACK 483-GB-218B : 4.28" (109 mm) Thread Size: 7/8-16 : 7.89" (200 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 17 Micron P FUEL SPIN-ON PRIMARY MACK 483-GB-219A : 4.28" (109 mm) Thread Size: 13/16-18 : 7.89" (200 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 14 Micron Page 177

180 P LUBE CARTRIDGE FULL FLOW SCANIA , : 3.31" (84 mm) ID: 0.75" (19 mm) : 4.21" (107 mm) P HYDRAULIC SPIN-ON GMC : 3.66" (93 mm) Thread Size: 3/4-16 : 5.37" (136 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency Beta 2: 20 Micron P TRANSMISSION SPIN ON GMC , AC #HD223, ALLISON TRANS. : 4.87" (124 mm) Thread Size: 1 5/16-12 Efficiency 99%: 40 Micron : 10.23" (260 mm) Gasket : 4.04" (103 mm) Gasket ID: 3.64" (92 mm) P FUEL SPIN-ON SECONDARY HINO , NISSAN 16403Z9003 : 3.31" (84 mm) Thread Size: 3/4-16 : 3.94" (100 mm) Gasket : 2.48" (63 mm) Gasket ID: 2.08" (53 mm) Efficiency 50%: 10 Micron P LUBE SPIN-ON FULL FLOW IVECO : 4.40" (112 mm) Thread Size: 3/4-16 : 5.70" (145 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 4 Micron P LUBE SPIN-ON FULL FLOW SUBARU, PINTO, DATSUN : 3.31" (84 mm) Thread Size: 3/4-16 : 3.93" (100 mm) Gasket : 2.47" (63 mm) Gasket ID: 2.25" (57 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P HYDRAULIC SPIN-ON LINDE : 3.82" (97 mm) Thread Size: 1-12 : 7.01" (178 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.80" (71 mm) Gasket ID: 2.40" (61 mm) Efficiency Beta 2: 20 Micron P HYDRAULIC SPIN-ON ZF : 3.82" (97 mm) Thread Size: 1-12 : 8.23" (209 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.80" (71 mm) Gasket ID: 2.40" (61 mm) Efficiency Beta 2: 15 Micron P MARVEL , PUROLATOR PM6035 : 2.61" (66 mm) ID: 1.25" (32 mm) : 4.80" (122 mm) P LUBE SPIN-ON BYPASS MITSUBISHI ME : 3.70" (94 mm) Thread Size: M18 x 1.5 : 3.72" (95 mm) Relief Valve Setting: 8-11 PSI ( Bar) Gasket : 2.46" (62 mm) Gasket ID: 2.20" (56 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 2.99" (76 mm) Thread Size: M16 x 1.5 : 5.71" (145 mm) Stand Pipe: Yes Y/N Gasket : 2.82" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 3.03" (77 mm) Thread Size: M16 x 1.5 : 4.51" (115 mm) Stand Pipe: No Y/N Gasket : 2.81" (71 mm) Gasket ID: 2.48" (63 mm) Efficiency 99%: 25 Micron P HYDRAULIC SPIN-ON GRESEN, DONALDSON LPS05 ASSY : 5.00" (127 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 4 Micron P HYDRAULIC SPIN-ON GRESEN, DONALDSON LPS05 ASSY : 5.00" (127 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 10 Micron Page 178

181 P HYDRAULIC SPIN-ON GRESEN, DONALDSON LPS05 ASSY : 5.00" (127 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 25 Micron P HYDRAULIC SPIN-ON GRESEN, MFP, CROSS, DONALDSON LPS04 ASSY : 3.66" (93 mm) Thread Size: 1-12 : 8.60" (218 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON GRESEN, MFP, CROSS, DONALDSON LPS04 ASSY : 3.66" (93 mm) Thread Size: 1-12 : 8.60" (218 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 25 Micron P VICKERS : 3.12" (79 mm) ID: 1.86" (47 mm) : 8.00" (203 mm) Efficiency Beta 75: 47 Micron P VICKERS : 4.00" (102 mm) ID: 2.23" (57 mm) : 18.00" (457 mm) Efficiency Beta 75: 21 Micron P HYDRAULIC SPIN-ON UCC MX , PTI F4E-35-CCB : 3.86" (98 mm) Thread Size: 3/4-14 : 5.80" (147 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON ZINGA AE-100, DONALDSON LPSO4 : 3.73" (95 mm) Thread Size: 1-12 : 5.76" (146 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency Beta 75: 149 Micron P HYDRAULIC SPIN-ON ZINGA SE-100, DONALDSON LPS05 : 5.06" (129 mm) Thread Size: 1 1/2-16 : 6.63" (169 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 75: 149 Micron P HYDRAULIC SPIN-ON ZINGA LE-100, DONALDSON LPS05 : 5.06" (129 mm) Thread Size: 1 1/2-16 : 10.63" (270 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 75: 149 Micron P VICKERS : 4.00" (102 mm) ID: 2.23" (57 mm) : 9.00" (229 mm) Efficiency Beta 75: 47 Micron P LUBE CARTRIDGE FULL FLOW MACK 57GC2134 : 3.87" (98 mm) ID: 0.64" (16 mm) : 4.58" (116 mm) Gasket : 0.56" (14 mm) P LUBE CARTRIDGE MACK 57GC2187 : 3.87" (98 mm) ID: 0.49" (13 mm) : 4.58" (116 mm) Gasket : 0.40" (10 mm) P LUBE SPIN-ON FULL FLOW FORD D3HZ6731B, MOTORCRAFT FL788 : 3.66" (93 mm) Thread Size: 3/4-16 : 6.85" (174 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P HANOMAG : 4.65" (118 mm) ID: 2.40" (61 mm) : 6.50" (165 mm) Efficiency Beta 2: 25 Micron P ZF : 2.36" (60 mm) ID: 0.71" (18 mm) : 3.94" (100 mm) Efficiency Beta 2: 15 Micron P ZF : 3.23" (82 mm) ID: 0.75" (19 mm) : 4.33" (110 mm) Page 179

182 P LUBE CARTRIDGE FULL FLOW LEYLAND : 3.11" (79 mm) ID: 0.75" (19 mm) : 9.37" (238 mm) Efficiency 50%: 10 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES : 3.30" (84 mm) ID: 0.93" (24 mm) : 7.50" (190 mm) P FUEL/WATER SEPARATOR CARTRIDGE CAT, CUMMINS, GROVE : 5.83" (148 mm) ID: 0.98" (25 mm) : 8.07" (205 mm) Efficiency 99%: 20 Micron P LUBE SPIN-ON FULL FLOW RENAULT RVI : 3.74" (95 mm) Thread Size: 1-12 : 8.31" (211 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.80" (71 mm) Gasket ID: 2.40" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW SCANIA : 3.74" (95 mm) Thread Size: 3/4-16 : 3.62" (92 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 25 Micron P LUBE SPIN-ON FULL FLOW IHC C1 FOR DT/DTA360 & 466 DIESEL ENG : 4.27" (108 mm) Thread Size: 1-12 : 8.00" (203 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P HYDRAULIC SPIN-ON DRESSER H1, H2 : 5.00" (127 mm) Thread Size: 1 1/2-16 : 11.71" (298 mm) Gasket : 4.17" (106 mm) Gasket ID: 3.58" (91 mm) Efficiency Beta 2: 2 Micron P FUEL SPIN-ON PRIMARY ONAN 122B325 : 3.03" (77 mm) Thread Size: 7/16-20 : 4.87" (124 mm) Gasket : 3.02" (77 mm) Gasket ID: 1.75" (44 mm) P LUBE SPIN-ON FULL FLOW MOPAR L335, CHYRSLER, CLARK, INTERCEPTOR MARINE : 3.00" (76 mm) Thread Size: 3/4-16 : 3.40" (86 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW DAF : 5.55" (141 mm) Thread Size: 1 1/2-16 : 12.20" (310 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.37" (111 mm) Gasket ID: 3.94" (100 mm) Efficiency 50%: 25 Micron P LUBE SPIN-ON FULL FLOW IVECO : 4.29" (109 mm) Thread Size: M30 x 2 : 9.06" (230 mm) Relief Valve Setting: 36 PSI (2.48 Bar) Gasket : 4.06" (103 mm) Gasket ID: 3.62" (92 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 12 Micron P FUEL SPIN-ON PRIMARY DEUTZ , MANN WK712/2 : 3.03" (77 mm) Thread Size: M16 x 1.5 : 3.15" (80 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.40" (61 mm) Efficiency 50%: 7 Micron P FUEL CARTRIDGE PRIMARY FIAT GEOTECH : 3.70" (94 mm) ID: 0.98" (25 mm) : 7.19" (183 mm) Efficiency 99%: 28 Micron P FUEL/WATER SEPARATOR SPIN-ON DETROIT DIESEL : 5.38" (137 mm) Thread Size: 1 3/8-16 : 11.77" (299 mm) Gasket : 4.29" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 99%: 7 Micron P FUEL CARTRIDGE PRIMARY MERCEDES, MANN BF900X (FELT) : 3.30" (84 mm) ID: 0.47" (12 mm) : 5.53" (140 mm) Page 180

183 P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE50455 : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.03" (102 mm) Gasket : 5.05" (128 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR CARTRIDGE GM , 6.2L DIESEL : 3.27" (83 mm) ID: 2.73" (69 mm) : 5.23" (133 mm) Efficiency 50%: 5 Micron P FUEL CARTRIDGE PRIMARY LISTER PETTER : 2.19" (56 mm) ID: 0.26" (7 mm) : 1.47" (37 mm) P FUEL SPIN-ON PRIMARY ROLLS ROYCE OE42873 : 3.78" (96 mm) Thread Size: M24 x 1.5 : 7.00" (178 mm) Efficiency 99%: 20 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES : 3.27" (83 mm) ID: 0.94" (24 mm) : 5.12" (130 mm) P FUEL/WATER SEPARATOR CARTRIDGE FORD 844F9176CAB : 3.50" (89 mm) ID: 0.63" (16 mm) : 6.42" (163 mm) P LUBE SPIN-ON COMBINATION FORD 826F6714 : 5.48" (139 mm) Thread Size: M60 x 3 : 6.62" (168 mm) Relief Valve Setting: PSI ( Bar) P LUBE SPIN-ON FULL FLOW FORD 844F6716AA : 3.78" (96 mm) Thread Size: M22 x 1.5 : 3.78" (96 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.54" (90 mm) Gasket ID: 3.03" (77 mm) Anti Drain Valve: Yes Y/N P LUBE CARTRIDGE FULL FLOW ROLLS ROYCE OE12448 : 3.62" (92 mm) ID: 0.51" (13 mm) : 5.83" (148 mm) P LUBE CARTRIDGE COMBINATION MERCEDES : 3.58" (91 mm) ID: 0.47" (12 mm) : 6.42" (163 mm) P LUBE SPIN-ON FULL FLOW DEUTZ : 3.75" (95 mm) Thread Size: 1-12 : 6.99" (178 mm) Relief Valve Setting: 30 PSI (2.07 Bar) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW NAVISTAR C1 : 5.32" (136 mm) Thread Size: M36 x 1.5 : 12.10" (307 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.35" (110 mm) Gasket ID: 3.95" (100 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 14 Micron P FUEL SPIN-ON PRIMARY NAVISTAR C1 : 3.05" (77 mm) Thread Size: 7/8-14 : 5.83" (148 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency 50%: 5 Micron P LUBE SPIN-ON FULL FLOW NAVISTAR C1, C1 Ford F4TZ-6731-A : 4.27" (108 mm) Thread Size: 1 1/2-16 : 8.02" (204 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY VOLVO : 3.71" (94 mm) Thread Size: M18 x 1.5 : 8.13" (207 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 5 Micron P LUBE CARTRIDGE FULL FLOW MITSUBISHI ME : 4.33" (110 mm) ID: 0.75" (19 mm) : 7.56" (192 mm) Efficiency 50%: 25 Micron Page 181

184 P LUBE CARTRIDGE FULL FLOW HINO : 4.09" (104 mm) ID: 1.26" (32 mm) : 7.09" (180 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE FULL FLOW ISUZU : 5.04" (128 mm) ID: 0.79" (20 mm) : 7.91" (201 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE ISUZU : 6.50" (165 mm) ID: 6.50" (165 mm) : 13.00" (330 mm) P LUBE CARTRIDGE ISUZU : 6.50" (165 mm) ID: 11.02" (280 mm) : 11.02" (280 mm) P LUBE SPIN-ON FULL FLOW ISUZU : 4.13" (105 mm) Thread Size: M20 x 1.5 : 3.15" (80 mm) Gasket : 3.92" (100 mm) Gasket ID: 3.52" (89 mm) P LUBE CARTRIDGE ISUZU : 6.50" (165 mm) ID: 11.02" (280 mm) : 12.95" (329 mm) Efficiency 50%: 5 Micron P FUEL SPIN-ON PRIMARY TOYOTA : 3.70" (94 mm) Thread Size: 3/4-16 : 5.43" (138 mm) Gasket : 2.48" (63 mm) Gasket ID: 2.20" (56 mm) Efficiency 50%: 10 Micron P HYDRAULIC SPIN-ON GRESEN, DONALDSON LPS05 : 5.00" (127 mm) Thread Size: 1 1/2-16 : 6.85" (174 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 4 Micron P HYDRAULIC SPIN-ON GRESEN, VICKERS, DONALDSON LPS05 : 4.91" (125 mm) Thread Size: 1 1/2-16 : 7.06" (179 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency Beta 2: 25 Micron P HYDRAULIC SPIN-ON GRESEN, VICKERS, DONALDSON LPS05 : 4.91" (125 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) Efficiency Beta 2: 10 Micron P LUBE SPIN-ON FULL FLOW ISUZU : 3.15" (80 mm) Thread Size: M22 x 1.5 : 3.94" (100 mm) Relief Valve Setting: 8-11 PSI ( Bar) Gasket : 2.48" (63 mm) Gasket ID: 1.99" (51 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 25 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI MB : 3.90" (99 mm) Thread Size: M20 x 1.5 : 5.43" (138 mm) Gasket : 2.87" (73 mm) Gasket ID: 2.20" (56 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI ME : 3.66" (93 mm) Thread Size: M24 x 1.5 : 6.77" (172 mm) Gasket : 3.54" (90 mm) Gasket ID: 2.66" (68 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY HINO : 4.09" (104 mm) ID: 0.59" (15 mm) : 4.09" (104 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW MERCEDES TRUCK : 4.27" (108 mm) Thread Size: 1-12 : 9.09" (231 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.44" (62 mm) Efficiency 99%: 40 Micron P FUEL CARTRIDGE PRIMARY MASSEY FERGUSON, PERKINS : 3.50" (89 mm) ID: 0.74" (19 mm) : 5.28" (134 mm) P LUBE CARTRIDGE FULL FLOW Mercedes , : 2.35" (60 mm) ID: 0.70" (18 mm) : 3.90" (99 mm) Efficiency 50%: 25 Micron Page 182

185 P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE62419, STANADYNE : 3.27" (83 mm) ID: 2.73" (69 mm) : 5.02" (128 mm) Overall : 6.04" (153 mm) Efficiency 95%: 5 Micron P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE62421, STANADYNE 31734DN : 3.27" (83 mm) ID: 2.73" (69 mm) : 5.02" (128 mm) Overall : 6.04" (153 mm) Efficiency 95%: 30 Micron P FUEL/WATER SEPARATOR CARTRIDGE CATERPILLAR , STANADYNE : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.00" (102 mm) Overall : 5.02" (128 mm) Efficiency 50%: 150 Micron P LUBE SPIN-ON FULL FLOW FORD E1FZ6731A, MOTORCRAFT FL400 : 3.00" (76 mm) Thread Size: 3/4-16 : 4.74" (120 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR CARTRIDGE CATERPILLAR , STANADYNE : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.75" (121 mm) Overall : 5.77" (147 mm) Efficiency 95%: 5 Micron P FUEL CARTRIDGE PRIMARY TOYOTA : 2.40" (61 mm) ID: 2.22" (56 mm) : 1.97" (50 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW HINO : 3.15" (80 mm) Thread Size: M20 x 1.5 : 3.98" (101 mm) Gasket : 2.48" (63 mm) Gasket ID: 1.81" (46 mm) Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW HINO : 4.02" (102 mm) Thread Size: M26 x 1.5 : 6.02" (153 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.87" (73 mm) Gasket ID: 2.20" (56 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 16 Micron P LUBE SPIN-ON FULL FLOW MAZDA SL : 4.02" (102 mm) Thread Size: 1-12 : 5.91" (150 mm) Gasket : 3.92" (100 mm) Gasket ID: 3.46" (88 mm) Efficiency 50%: 16 Micron P FUEL SPIN-ON PRIMARY KOMATSU : 3.01" (76 mm) Thread Size: 3/4-16 : 5.75" (146 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Efficiency 99%: 17 Micron P LUBE SPIN-ON FULL FLOW MAZDA : 3.96" (101 mm) Thread Size: 1-12 : 4.92" (125 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.92" (100 mm) Gasket ID: 3.48" (88 mm) Anti Drain Valve: Yes Y/N P LUBE SPIN-ON BYPASS MAZDA SL5014V61 : 3.64" (92 mm) Thread Size: M20 x 1.5 : 4.92" (125 mm) Gasket : 3.43" (87 mm) Gasket ID: 2.08" (53 mm) Efficiency 50%: 5 Micron P HYDRAULIC SPIN-ON JOHN DEERE AT : 4.84" (123 mm) Thread Size: 1 1/2-16 : 11.41" (290 mm) Efficiency Beta 2: 7 Micron P HYDRAULIC SPIN-ON JOHN DEERE AT140030, HITACHI : 3.69" (94 mm) Thread Size: M24 x 1.5 Male : 8.88" (226 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Anti Drain Valve: Yes Y/N Efficiency Beta 2: 25 Micron P HYDRAULIC SPIN-ON JOHN DEERE 1T : 4.84" (123 mm) Thread Size: 1 1/2-16 : 11.41" (290 mm) Efficiency Beta 2: 10 Micron P LUBE SPIN-ON FULL FLOW HITACHI : 4.33" (110 mm) Thread Size: 1 1/8-16 : 6.38" (162 mm) Gasket : 4.13" (105 mm) Gasket ID: 3.74" (95 mm) Efficiency 50%: 20 Micron Page 183

186 P LUBE SPIN-ON FULL FLOW HITACHI , ISUZU : 4.66" (118 mm) Thread Size: 1 3/8-16 : 9.91" (252 mm) Gasket : 4.33" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 50 Micron P LUBE SPIN-ON FULL FLOW HITACHI , ISUZU : 4.00" (102 mm) Thread Size: 1-12 : 5.92" (150 mm) Relief Valve Setting: 17 PSI (1.20 Bar) Gasket : 3.92" (100 mm) Gasket ID: 3.48" (88 mm) Anti Drain Valve: Yes Y/N P LUBE CARTRIDGE HITACHI : 6.30" (160 mm) ID: 0.67" (17 mm) : 10.51" (267 mm) P LUBE SPIN-ON BYPASS VOLVO : 4.29" (109 mm) Thread Size: 1 3/8-16 : 10.36" (263 mm) Gasket : 3.99" (101 mm) Gasket ID: 3.63" (92 mm) Efficiency 99%: 35 Micron P HYDRAULIC SPIN-ON ZINGA BE10-18 : 2.99" (76 mm) Thread Size: 3/4-16 : 3.39" (86 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) P EUCLID, TEREX, PUROLATOR EP114 : 6.00" (152 mm) ID: 3.52" (89 mm) : 8.50" (216 mm) Efficiency Beta 2: 20 Micron P LUBE SPIN-ON FULL FLOW CUMMINS "98" B SERIES : 3.66" (93 mm) Thread Size: 1 1/8-16 : 6.85" (174 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.44" (62 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW CATERPILLAR 9T-9054 : 3.03" (77 mm) ID: 1.02" (26 mm) : 8.19" (208 mm) Efficiency 99%: 45 Micron P FUEL SPIN-ON SECONDARY MACK 483-GB-431 : 4.28" (109 mm) Thread Size: 1 1/16-16 : 10.31" (262 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 9 Micron P FUEL IN-LINE CASE IH D : 1.94" (49 mm) Inlet Size: 3/8 Hose, 10 Hose Overall : 3.88" (99 mm) Outlet Size: 3/8 Hose, 10 Hose Efficiency 99%: 150 Micron P FUEL/WATER SEPARATOR CARTRIDGE NEW HOLLAND : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.75" (121 mm) Overall : 5.77" (147 mm) Efficiency 99%: 150 Micron P FUEL/WATER SEPARATOR CARTRIDGE NEW HOLLAND : 3.27" (83 mm) ID: 2.73" (69 mm) : 6.41" (163 mm) Overall : 7.43" (189 mm) Efficiency 50%: 5 Micron P FUEL SPIN-ON PRIMARY RACOR S3225P : 4.36" (111 mm) Thread Size: 1-14 : 5.04" (128 mm) Efficiency 50%: 30 Micron P FUEL CARTRIDGE PRIMARY MOTORCRAFT FD4596, Ford F81Z-9N184- AA : 3.81" (97 mm) ID: 0.50" (13 mm) : 2.85" (72 mm) Efficiency 95%: 5 Micron P FUEL SPIN-ON SECONDARY CUMMINS 6C, 6CT SERIES : 2.99" (76 mm) Thread Size: M16 x 1.5 : 5.12" (130 mm) Stand Pipe: Yes Y/N Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Efficiency 99%: 16 Micron P HYDRAULIC SPIN-ON Clark Hurth , Hyster : 3.68" (93 mm) Thread Size: 2-16 : 6.89" (175 mm) Relief Valve Setting: 37 PSI (2.55 Bar) Gasket : 2.75" (70 mm) Gasket ID: 2.44" (62 mm) Efficiency Beta 2: 6 Micron Page 184

187 P FUEL IN-LINE JOHN DEERE AR103220, CUMMINS : 2.00" (51 mm) Inlet Size: 5/8-24 Overall : 3.54" (90 mm) : 2.41" (61 mm) Outlet Size: 5/16 Efficiency 99%: 150 Micron P FUEL/WATER SEPARATOR CARTRIDGE FLEETGUARD FS1011 FOR OPTIGUARD SYSTEM : 4.31" (109 mm) ID: 0.65" (17 mm) : 6.47" (164 mm) Efficiency 99%: 20 Micron P FUEL SPIN-ON PRIMARY CARRIER : 4.26" (108 mm) Thread Size: 1-14 : 5.93" (151 mm) Gasket : 3.54" (90 mm) Gasket ID: 3.16" (80 mm) Efficiency 99%: 10 Micron P LUBE CARTRIDGE M.A.N : 3.22" (82 mm) ID: 1.50" (38 mm) : 7.89" (200 mm) P LUBE SPIN-ON FULL FLOW DAF , FLEETGUARD LF3737 & LF3773 : 5.51" (140 mm) Thread Size: M42 x 2 : 11.89" (302 mm) Relief Valve Setting: 36 PSI (2.48 Bar) Gasket : 4.37" (111 mm) Gasket ID: 3.97" (101 mm) P LUBE CARTRIDGE MERCEDES A : 4.64" (118 mm) ID: 1.78" (45 mm) : 11.77" (299 mm) P FUEL IN-LINE FORD D3FZ9155A, D2RY9155A -- 2 HOSES 4 CLAMPS INCLUDED : 0.94" (24 mm) Inlet Size: 5/16 Overall : 2.87" (73 mm) Outlet Size: 5/16 Efficiency 99%: 100 Micron P FUEL SPIN-ON PRIMARY CARRIER : 4.26" (108 mm) Thread Size: 1-14 : 5.90" (150 mm) Gasket : 4.00" (102 mm) Gasket ID: 3.56" (90 mm) Efficiency 99%: 10 Micron P FUEL IN-LINE JOHN DEERE T19743 : 2.00" (51 mm) Inlet Size: 1/8-27 Body : 2.38" (60 mm) Outlet Size: 1/2-20 Overall : 3.38" (86 mm) Efficiency 50%: 23 Micron P FUEL CARTRIDGE PRIMARY DAVCO 230/232 SERIES DETROIT DIESEL : 3.45" (88 mm) ID: 0.66" (17 mm) : 4.44" (113 mm) P FUEL CARTRIDGE PRIMARY DAVCO 380/382 SERIES DETROIT DIESEL ENGINES : 3.82" (97 mm) ID: 0.66" (17 mm) : 6.74" (171 mm) Efficiency 99%: 7 Micron P HYDRAULIC SPIN-ON ZINGA BE10-0, GALBREATH 1674 : 2.99" (76 mm) Thread Size: 3/4-16 : 3.39" (86 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) P FUEL/WATER SEPARATOR CARTRIDGE DAVCO 380 AND 382 SERIES FUEL PROCESSORS : 3.82" (97 mm) ID: 0.66" (17 mm) : 6.74" (171 mm) Efficiency 99%: 7 Micron P FUEL SPIN-ON PRIMARY DAF : 3.77" (96 mm) Thread Size: M16 x 1.5 : 8.34" (211 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) Efficiency 50%: 3 Micron P FUEL SPIN-ON PRIMARY Mercedes-Benz , : 3.50" (89 mm) Thread Size: M12 x 1.5 : 8.16" (207 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) P HYDRAULIC INLINE TOYOTA : 3.95" (100 mm) Inlet Size: 1.06" (27 mm) Overall : 4.72" (120 mm) Outlet Size: 3/4 PT Efficiency Beta 2: 25 Micron P HYDRAULIC INLINE TOYOTA : 3.95" (100 mm) Inlet Size: 1.08" (27 mm) Overall : 4.72" (120 mm) Outlet Size: 1.08" (27 mm) Efficiency Beta 2: 25 Micron Page 185

188 P HYDRAULIC INLINE TOYOTA : 3.95" (100 mm) Inlet Size: 0.09" (2 mm) Overall : 4.72" (120 mm) Outlet Size: 0.09" (2 mm) P HYDRAULIC INLINE TOYOTA : 3.95" (100 mm) Inlet Size: 1.62" (41 mm) Overall : 6.89" (175 mm) Outlet Size: 1 PT P FUEL CARTRIDGE PRIMARY CLAAS, HANOMAG, LIEBHERR, MERCEDES, VOLVO : 2.75" (70 mm) ID: 0.52" (13 mm) : 4.52" (115 mm) P LUBE CARTRIDGE FULL FLOW CAT 1R-0659, 4W-4840, KOMATSU : 3.98" (101 mm) ID: 1.63" (41 mm) : 9.29" (236 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW CAT 1R-0721, 5S-0485, HYSTER : 5.08" (129 mm) ID: 3.37" (86 mm) : 8.94" (227 mm) Efficiency 50%: 14 Micron P HYDRAULIC SPIN-ON CATERPILLAR : 3.05" (77 mm) Thread Size: 13/16-16 : 5.50" (140 mm) P IHC C92, MACK 485GB3160 : 3.47" (88 mm) ID: 1.39" (35 mm) : 2.72" (69 mm) Efficiency Beta 75: 40 Micron P HYDRAULIC INLINE TOYOTA : 3.95" (100 mm) Inlet Size: 1.08" (27 mm) Overall : 4.72" (120 mm) Outlet Size: 3/4 PT P FUEL CARTRIDGE PRIMARY CLAAS, DEMAG, LIEBHERR, MERCEDES : 3.36" (85 mm) ID: 0.52" (13 mm) : 5.70" (145 mm) P LUBE SPIN-ON FULL FLOW SCANIA : 4.33" (110 mm) Thread Size: 1 1/8-16 : 10.20" (260 mm) Gasket : 4.09" (104 mm) Gasket ID: 3.66" (93 mm) P FUEL SPIN-ON PRIMARY RVI, M&H WK727 : 3.14" (80 mm) Thread Size: M16 x 1.5 : 4.88" (124 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) P LUBE CARTRIDGE CUMMINS : 7.87" (200 mm) ID: 0.86" (22 mm) : 10.03" (255 mm) P FUEL SPIN-ON PRIMARY DAF : 3.77" (96 mm) Thread Size: M16 x 1.5 : 5.66" (144 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) P FUEL SPIN-ON PRIMARY Saab-Scania , : 3.77" (96 mm) Thread Size: M24 x 1.5 : 5.66" (144 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) Efficiency 50%: 3 Micron P FUEL SPIN-ON PRIMARY RENAULT V.I : 3.78" (96 mm) Thread Size: M16 x 1.5 : 5.66" (144 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) P FUEL/WATER SEPARATOR SPIN-ON M & H WDK724 : 3.15" (80 mm) Thread Size: M16 x 1.5 : 5.98" (152 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (62 mm) P LUBE CARTRIDGE 500 SERIES BYPASS : 7.72" (196 mm) ID: 0.86" (22 mm) : 10.06" (256 mm) Efficiency 50%: 5 Micron P FUEL CARTRIDGE PRIMARY PUROLATOR F70100 HOUSING : 3.48" (88 mm) ID: 1.32" (34 mm) : 4.80" (122 mm) Efficiency 99%: 9 Micron Page 186

189 P FUEL/WATER SEPARATOR CARTRIDGE CATERPILLAR : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.75" (121 mm) Gasket : 5.77" (147 mm) Efficiency 99%: 150 Micron P FUEL/WATER SEPARATOR CARTRIDGE CATERPILLAR : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.75" (121 mm) Overall : 5.77" (147 mm) Efficiency 95%: 30 Micron P FUEL IN-LINE GM LIGHT TRUCK, AC GF624, G580 : 2.28" (58 mm) Inlet Size: 0.37" (9 mm) Overall : 6.38" (162 mm) Outlet Size: 3/8 Efficiency 50%: 23 Micron P LUBE SPIN-ON FULL FLOW GM LIGHT TRUCK, AC PF59, PH59 : 2.96" (75 mm) Thread Size: 13/16-16 : 4.45" (113 mm) Gasket : 2.77" (70 mm) Gasket ID: 2.36" (60 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR CARTRIDGE GM : 3.27" (83 mm) ID: 2.73" (69 mm) : 5.50" (140 mm) Overall : 6.52" (166 mm) P LUBE SPIN-ON FULL FLOW GM LIGHT TRUCK, AC PF454, PH454 : 3.77" (96 mm) Thread Size: 13/16-16 : 3.08" (78 mm) Gasket : 3.57" (91 mm) Gasket ID: 3.16" (80 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 22 Micron P FUEL IN-LINE AC LIGHT DUTY, GF645, G645 : 2.28" (58 mm) Inlet Size: M16 x 1.5 Overall : 5.35" (136 mm) Outlet Size: 3/8 Anti Drain Valve: Yes Y/N Efficiency 99%: 70 Micron P FUEL/WATER SEPARATOR CARTRIDGE DAVCO , : 4.21" (107 mm) ID: 0.66" (17 mm) : 6.74" (171 mm) Gasket : 2.72" (69 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 7 Micron P LUBE SPIN-ON FULL FLOW DETROIT DIESEL : 5.33" (135 mm) Thread Size: M36 x 1.5 : 12.10" (308 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 99%: 21 Micron P FUEL SPIN-ON PRIMARY MANN & HUMMEL WK940/2 : 3.66" (93 mm) Thread Size: M24 x 1.5 : 5.59" (142 mm) P LUBE CARTRIDGE FULL FLOW CUMMINS : 5.00" (127 mm) ID: 1.50" (38 mm) : 9.62" (244 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW AC PF SILVERADO V L F.I. : 3.69" (94 mm) Thread Size: 13/16-16 : 5.36" (136 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.48" (88 mm) Gasket ID: 3.10" (79 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 20 Micron P LUBE SPIN-ON FULL FLOW M&H W11102/20 : 4.25" (108 mm) Thread Size: 1 1/8-16 : 10.24" (260 mm) P LUBE SPIN-ON FULL FLOW DAF : 3.85" (98 mm) Thread Size: M27 x 2 : 6.89" (175 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES : 2.44" (62 mm) ID: 0.86" (21 mm) : 6.20" (157 mm) P FUEL CARTRIDGE SOCK GMC : 3.00" (76 mm) ID: 1.02" (26 mm) : 6.00" (152 mm) Efficiency 99%: 40 Micron Page 187

190 P CAT 4T-0522, 4T-0523 : 5.07" (129 mm) ID: 3.34" (85 mm) : 7.00" (178 mm) Efficiency Beta 75: 35 Micron P FUEL SPIN-ON PRIMARY : 2.99" (76 mm) Thread Size: M14 x 1.5 : 4.72" (120 mm) P FUEL/WATER SEPARATOR CARTRIDGE FORD 3C3Z9N184CA F SERIES PICKUP : 3.35" (85 mm) Height: 2.60" (66 mm) : 4.43" (113 mm) P HYDRAULIC SPIN-ON HITACHI : 3.82" (97 mm) Thread Size: 1 1/8-16 : 5.95" (151 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) P NORDBERG : 6.31" (160 mm) ID: 1.60" (41 mm) : 31.20" (792 mm) P LUBE CARTRIDGE KOHLER A270192, MF M91 : 4.25" (108 mm) ID: 0.55" (14 mm) : 4.19" (106 mm) P LUBE CARTRIDGE FULL FLOW FORD 3C3Z6731AA F SERIES PICKUP : 3.25" (83 mm) : 7.13" (181 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR CARTRIDGE CIMTEK EHS30, : 4.81" (122 mm) ID: 1.12" (28 mm) : 9.13" (232 mm) Efficiency 50%: 30 Micron P FUEL SPIN-ON PRIMARY VOLVO : 4.43" (113 mm) Thread Size: M32 x 1.5 : 10.00" (254 mm) Gasket : 4.09" (104 mm) Gasket ID: 3.66" (93 mm) Efficiency 99%: 5 Micron P HYDRAULIC INLINE HITACHI : 5.51" (140 mm) Inlet Size: 0.79 x 1.16 Overall : 12.01" (305 mm) Outlet Size: 0.79 x 1.16 P LUBE SPIN-ON FULL FLOW DATSUN, TOYOTA SUZUKI : 2.56" (65 mm) Thread Size: 3/4-16 : 2.80" (71 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.46" (62 mm) Gasket ID: 1.94" (49 mm) Anti Drain Valve: Yes Y/N P FUEL CARTRIDGE SECONDARY CUMMINS, GMC : 2.98" (76 mm) ID: 1.03" (26 mm) : 7.81" (198 mm) Efficiency 99%: 22 Micron P FUEL CARTRIDGE SOCK GMC : 4.00" (102 mm) ID: 1.12" (28 mm) : 8.75" (222 mm) Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON NAVISTAR C1 : 4.26" (108 mm) Thread Size: 1-14 : 5.79" (147 mm) Gasket : 3.60" (91 mm) Gasket ID: 3.20" (81 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 3.69" (94 mm) Thread Size: M20 x 1.5 : 5.75" (146 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.46" (63 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON KOMATSUp : 3.11" (79 mm) Thread Size: 3/4-16 : 5.59" (142 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) Efficiency 95%: 20 Micron P LUBE SPIN-ON BYPASS WISCONSIN RV51 : 3.66" (93 mm) Thread Size: 13/16-16 : 4.34" (110 mm) Gasket : 3.44" (87 mm) Gasket ID: 3.10" (79 mm) P FUEL CARTRIDGE SOCK GMC : 2.95" (75 mm) ID: 1.24" (31 mm) : 8.38" (213 mm) Page 188

191 P FUEL/WATER SEPARATOR SPIN-ON 1999 FORD LIGHT TRUCK, MOTORCRAFT FD4597 : 3.79" (96 mm) Thread Size: 1-14 : 6.22" (158 mm) Gasket : 3.59" (91 mm) Gasket ID: 3.15" (80 mm) Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON NAVISTAR C91 : 4.29" (109 mm) Thread Size: 1-14 : 5.75" (146 mm) Gasket : 3.97" (101 mm) Gasket ID: 3.59" (91 mm) Efficiency 50%: 12 Micron P FUEL IN-LINE MOTORCRAFT FG1036 : 2.22" (56 mm) Inlet Size: 3/8 Overall : 7.00" (178 mm) Outlet Size: 3/8 Efficiency 50%: 23 Micron P FUEL CARTRIDGE PRIMARY GM : 0.70" (18 mm) ID: 0.20" (5 mm) : 2.01" (51 mm) P FUEL CARTRIDGE SOCK CASE A35863, A36557 : 2.90" (74 mm) ID: 1.10" (28 mm) : 2.37" (60 mm) P LUBE SPIN-ON FULL FLOW LIEBHERR : 3.70" (94 mm) Thread Size: 1-12 : 8.30" (211 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.48" (63 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES : 3.24" (83 mm) ID: 1.41" (36 mm) : 6.65" (169 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES : 2.50" (64 mm) ID: 1.22" (31 mm) : 4.53" (115 mm) P FUEL CARTRIDGE PRIMARY FORD D7ZE9155AB : 0.69" (18 mm) ID: 0.58" (15 mm) : 1.26" (32 mm) P FUEL/WATER SEPARATOR CARTRIDGE CATERPILLAR , STANADYNE : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.03" (102 mm) Overall : 5.05" (128 mm) P LUBE SPIN-ON FULL FLOW CUMMINS C : 3.66" (93 mm) Thread Size: 3/4-16 : 3.57" (91 mm) Relief Valve Setting: 16 PSI (1.10 Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 21 Micron P HYDRAULIC SPIN-ON MASSEY FERGUSON M1 : 3.70" (94 mm) Thread Size: 1 1/8-16 : 4.38" (111 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.42" (61 mm) P CATERPILLAR 1R0774 : 5.12" (130 mm) ID: 3.34" (85 mm) : 11.06" (281 mm) Efficiency Beta 75: 25 Micron P CASE A1, CLARK : 1.67" (42 mm) ID: 0.91" (23 mm) : 3.45" (88 mm) Efficiency Beta 75: 50 Micron P CATERPILLAR : 5.51" (140 mm) ID: 3.84" (98 mm) : 16.75" (425 mm) Efficiency Beta 75: 25 Micron P HITACHI : 3.53" (90 mm) ID: 1.91" (49 mm) : 11.44" (291 mm) P FUEL CARTRIDGE PRIMARY PETTER : 2.19" (56 mm) ID: 0.91" (23 mm) : 2.48" (63 mm) Page 189

192 P LUBE SPIN-ON FULL FLOW FORD, MASSEY FERGUSON, MPLS MOLINE : 4.28" (109 mm) Thread Size: 3/4-16 : 3.77" (96 mm) Relief Valve Setting: 8-11 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P CLARK , , : 5.98" (152 mm) ID: 3.52" (89 mm) : 3.97" (101 mm) P ZINGA WE51810 : 5.22" (133 mm) ID: 3.24" (82 mm) : 18.13" (461 mm) P HYDRAULIC SPIN-ON ALLIS CHALMERS : 5.04" (128 mm) Thread Size: 1 1/2-16 : 6.87" (174 mm) Efficiency 95%: 8 Micron P COOLANT SPIN-ON FLEETGUARD WF2127, CUMMINS SIGNATURE 600 ENGINES : 3.77" (96 mm) Thread Size: M36 x 2 : 5.76" (146 mm) Gasket : 3.73" (95 mm) Gasket ID: 3.18" (81 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON DEUTZ , : 3.00" (76 mm) Thread Size: M16 x 1.5 : 6.50" (165 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON BOSCH : 3.02" (77 mm) Thread Size: M16 x 1.5 : 5.55" (141 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.40" (61 mm) Efficiency 99%: 11 Micron P HYDRAULIC SPIN-ON TOYOTA , KOMATSU AS : 3.00" (76 mm) Thread Size: 3/4-16 : 3.53" (90 mm) Relief Valve Setting: 8 PSI (0.55 Bar) Gasket : 2.74" (70 mm) Gasket ID: 2.37" (60 mm) P HYDRAULIC SPIN-ON FORD D8NNF914BA, CA, D8NNM903AA,FA : 5.00" (127 mm) Thread Size: 1 1/2-16 : 6.87" (174 mm) P HYDRAULIC SPIN-ON VOITH , DYNAPAC : 3.68" (93 mm) Thread Size: 1-12 : 8.29" (211 mm) Gasket : 0.76" (19 mm) Gasket ID: 2.48" (63 mm) P HYDRAULIC SPIN-ON JOHN DEERE AT : 4.80" (122 mm) Thread Size: 1 1/2-16 : 11.75" (298 mm) Gasket : 4.18" (106 mm) Gasket ID: 3.78" (96 mm) P FUEL IN-LINE FORD MOTORCRAFT FG19B : 0.78" (20 mm) Inlet Size: 5/16 Overall : 2.17" (55 mm) Outlet Size: 7/8-20 Efficiency 99%: 100 Micron P LUBE SPIN-ON COMBINATION JOHN DEERE VENTURI COMBO : 4.66" (118 mm) Thread Size: M52 x 1.5 : 11.70" (297 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.01" (102 mm) Efficiency 99%: 22 Micron P LUBE SPIN-ON FULL FLOW HITACHI : 4.65" (118 mm) Thread Size: 1 1/2-12 : 8.09" (205 mm) Relief Valve Setting: 20 PSI (1.40 Bar) Gasket : 4.33" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 25 Micron P LUBE SPIN-ON COMBINATION TOYOTA , : 4.13" (105 mm) Thread Size: M24 x 1.5 : 4.81" (122 mm) Gasket : 3.15" (80 mm) Gasket ID: 2.80" (71 mm) P LUBE SPIN-ON FULL FLOW GM : 2.92" (74 mm) Thread Size: 13/16-16 : 4.83" (123 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.43" (62 mm) Efficiency 50%: 25 Micron Page 190

193 P LUBE SPIN-ON FULL FLOW GM : 3.66" (93 mm) Thread Size: 13/16-16 : 4.34" (110 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P LUBE SPIN-ON FULL FLOW HONDA 15400PL2004, 005, 305 : 3.15" (80 mm) Thread Size: M22 x 1.5 : 3.17" (81 mm) Gasket : 2.94" (75 mm) Gasket ID: 2.43" (62 mm) P FORD FOHZ3C602A, NAVISTAR C91 : 4.00" (102 mm) ID: 2.42" (61 mm) : 4.21" (107 mm) P TRANSMISSION FILTER KIT CHRYSLER, INTERNATIONAL, JEEP P TRANSMISSION FILTER KIT GM P HYDRAULIC SPIN-ON VOITH , : 5.50" (140 mm) Thread Size: 1 1/2-16 : 7.00" (178 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Gasket : 4.36" (111 mm) Gasket ID: 3.96" (101 mm) P HYDRAULIC SPIN-ON GM , : 3.07" (73 mm) Thread Size: 3/4-20 : 3.00" (76 mm) Gasket : 2.75" (70 mm) P FUEL/WATER SEPARATOR CARTRIDGE FUEL DISPENCING PUMPS : 4.81" (122 mm) ID: 1.12" (28 mm) : 9.13" (232 mm) Efficiency 50%: 10 Micron P LUBE CARTRIDGE FULL FLOW CUMMINS : 4.76" (121 mm) ID: 1.50" (38 mm) : 7.44" (189 mm) Efficiency 99%: 48 Micron P LUBE CARTRIDGE WAUKESHA : 4.38" (111 mm) ID: 1.59" (40 mm) : 31.00" (787 mm) Efficiency 95%: 15 Micron P KOMATSU 21N : 5.00" (127 mm) ID: 1.75" (44 mm) : 11.50" (292 mm) P KOMATSU : 1.65" (42 mm) ID: 0.91" (23 mm) : 3.46" (88 mm) P FUEL SPIN-ON PRIMARY CATERPILLAR 1R0762 : 3.70" (94 mm) Thread Size: 1-14 : 10.75" (273 mm) Gasket : 3.60" (91 mm) Gasket ID: 3.03" (77 mm) Efficiency 99%: 3 Micron P FUEL/WATER SEPARATOR SPIN-ON CATERPILLAR 1R0770 : 4.27" (108 mm) Thread Size: 1-14 : 10.08" (256 mm) Gasket : 4.27" (108 mm) Gasket ID: 3.68" (93 mm) Efficiency 99%: 20 Micron p FUEL CARTRIDGE PRIMARY MAN TGA : 2.99" (76 mm) ID: 1.08" (27 mm) : 7.95" (202 mm) P FUEL CARTRIDGE PRIMARY Scania 164 series and Scania marine engines DI series : 3.35" (85 mm) ID: 1.50" (38 mm) : 7.11" (180 mm) P LUBE CARTRIDGE Scania 164 serie, scania marine engines DI series : 4.02" (102 mm) ID: 1.76" (45 mm) : 9.92" (252 mm) P LUBE CARTRIDGE FULL FLOW Daf 75CF, Daf 85CF, Daf 95 XF : 4.41" (112 mm) ID: 2.22" (56 mm) : 5.91" (150 mm) Page 191

194 P FUEL CARTRIDGE PRIMARY CUMMINS : 4.13" (105 mm) ID: 1.81" (46 mm) : 8.06" (205 mm) P FUEL CARTRIDGE PRIMARY MERCEDES : 3.62" (92 mm) ID: 1.06" (27 mm) : 3.98" (101 mm) Efficiency 99%: 8 Micron P LUBE CARTRIDGE Volvo / M&H HU721 : 2.50" (64 mm) ID: 1.22" (31 mm) : 5.91" (150 mm) P TRANSMISSION FILTER KIT GM, ISUSZU LIGHT DUTY TRUCK P LUBE CARTRIDGE P22 RR & MARINE : 6.50" (165 mm) ID: 1.47" (37 mm) : 29.38" (746 mm) Efficiency 99%: 35 Micron P MACK POWER STEERING : 5.00" (127 mm) ID: 1.50" (38 mm) : 4.12" (105 mm) Efficiency Beta 2: 25 Micron P LUBE SPIN-ON FULL FLOW : 4.45" (113 mm) Thread Size: M30 x 2 : 8.92" (227 mm) Efficiency 50%: 14 Micron P FUEL SPIN-ON PRIMARY Yanmar SV serie; Volvo EC/EW serie; Volvo EC55B; Volvo ECR and ECR88 : 6.29" (160 mm) Thread Size: M20 x 1.5 : 6.30" (160 mm) P FUEL CARTRIDGE PRIMARY Yanmar : 1.42" (36 mm) ID: 0.49" (12 mm) : 3.54" (90 mm) P KOMATSU WHEEL LOADERS : 4.02" (102 mm) ID: 1.78" (45 mm) : 8.98" (228 mm) P FUEL IN-LINE Scania Serie P,R,T, 4; Scania bus Irizar K and N : 3.26" (83 mm) ID: 1.50" (38 mm) : 6.38" (162 mm) P IHC C1 : 4.52" (115 mm) ID: 1.75" (44 mm) : 9.10" (231 mm) Efficiency Beta 2: 4 Micron P LUBE SPIN-ON COMBINATION IH DT ON : 4.65" (118 mm) Thread Size: M95 x 2.0 : 13.67" (347 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 30 Micron P FUEL/WATER SEPARATOR CARTRIDGE IH DT ON : 3.74" (95 mm) ID: 0.82" (21 mm) : 5.59" (142 mm) Efficiency 99%: 7 Micron P FUEL/WATER SEPARATOR SPIN-ON CATERPILLAR : 3.68" (93 mm) Thread Size: 1-14 : 8.63" (219 mm) Efficiency 99%: 30 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS TIER 2 QSB & 2VE ENGINES : 3.69" (94 mm) Thread Size: M20 x 1.5 : 7.58" (193 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.46" (63 mm) Efficiency 99%: 5 Micron P LUBE CARTRIDGE Daf 85CF and XF95 : 4.44" (113 mm) ID: 2.67" (68 mm) : 8.66" (220 mm) P FUEL/WATER SEPARATOR SPIN-ON Iveco / New Holland : 3.82" (97 mm) Thread Size: M14 x 1.5 : 7.60" (193 mm) Page 192

195 P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE60021 : 3.27" (83 mm) ID: 2.73" (69 mm) : 3.48" (88 mm) Overall : 4.50" (114 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE : 3.27" (83 mm) ID: 2.73" (69 mm) : 6.65" (169 mm) Overall : 7.67" (195 mm) Efficiency 50%: 10 Micron Efficiency 50%: 2 Micron P FUEL/WATER SEPARATOR SPIN-ON JOHN DEERE RE : 4.25" (108 mm) Thread Size: 1-14 : 11.88" (302 mm) Overall : 19.64" (499 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON JOHN DEERE RE : 4.24" (108 mm) Thread Size: 7/8-14 : 6.74" (171 mm) Gasket : 3.93" (100 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 5 Micron P LUBE SPIN-ON FULL FLOW CUMMINS : 4.67" (119 mm) Thread Size: 1 1/2-12 : 8.94" (227 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 14 Micron P FUEL CARTRIDGE PRIMARY KOMATSU : 2.93" (74 mm) ID: 0.62" (16 mm) : 4.11" (104 mm) Efficiency 99%: 25 Micron P FUEL CARTRIDGE PRIMARY IHC C1 : 2.93" (74 mm) ID: 0.62" (16 mm) : 2.20" (56 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY BULK FUELTANK FILTER : 2.96" (75 mm) Thread Size: 1 1/8-12 : 5.23" (133 mm) Efficiency 50%: 20 Micron P FUEL SPIN-ON PRIMARY FRAM PS3808, PUROLATOR GP23 : 3.80" (97 mm) Thread Size: 11/16-16 : 4.16" (106 mm) Gasket : 3.60" (91 mm) Gasket ID: 3.17" (81 mm) P FUEL SPIN-ON PRIMARY FORD E6HZ9365B : 3.03" (77 mm) Thread Size: M16 x 1.5 : 2.49" (63 mm) Gasket ID: 2.45" (62 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY HINO : 3.73" (95 mm) Thread Size: 1-14 : 5.69" (145 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 25 Micron P FUEL/WATER SEPARATOR CARTRIDGE FRAM CC1133PL COALESCER : 3.01" (76 mm) ID: 1.04" (26 mm) : 7.34" (186 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR CARTRIDGE FRAM CS1133PL SEPARATOR : 3.01" (76 mm) ID: 1.04" (26 mm) : 4.41" (112 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 4.74" (120 mm) Thread Size: 1 1/4-12 : 11.80" (300 mm) Gasket : 4.39" (112 mm) Gasket ID: 3.87" (98 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON DEUTZ : 3.06" (78 mm) Thread Size: M16 x 1.5 : 6.74" (171 mm) Gasket : 2.46" (62 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON CASE J : 3.03" (77 mm) Thread Size: M16 x 1.5 : 4.40" (112 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 25 Micron Page 193

196 P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 3.69" (94 mm) Thread Size: 1-14 : 5.85" (149 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 25 Micron P MICHIGAN , JOHN DEERE AT49249 : 3.48" (88 mm) ID: 1.14" (29 mm) : 5.50" (140 mm) Efficiency Beta 2: 22 Micron P HYDRAULIC SPIN-ON PETERBILT : 3.73" (95 mm) Thread Size: 1-12 : 6.83" (173 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency Beta 2: 26 Micron P VERSATILE : 3.48" (88 mm) ID: 1.36" (35 mm) : 9.27" (235 mm) Relief Valve Setting: PSI ( Bar) Efficiency Beta 2: 22 Micron P GMC : 3.98" (101 mm) ID: 1.42" (36 mm) : 5.00" (127 mm) Efficiency Beta 2: 22 Micron P CLARK : 3.45" (88 mm) ID: 1.13" (29 mm) : 5.51" (139 mm) Efficiency Beta 75: 36 Micron P CAT 2P-5834 : 2.97" (75 mm) ID: 1.02" (26 mm) : 5.67" (143 mm) Efficiency Beta 75: 54 Micron P HYDRAULIC SPIN-ON CLARK : 3.72" (95 mm) Thread Size: 2-16 : 6.81" (173 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency Beta 2: 6 Micron P JOHN DEERE AT127608, AT : 5.91" (150 mm) ID: 4.33" (110 mm) : 17.72" (450 mm) Efficiency Beta 75: 22 Micron P HYDRAULIC SPIN-ON IHC C1 : 3.75" (95 mm) Thread Size: 1 1/2-16 : 8.00" (203 mm) Gasket : 3.45" (88 mm) Gasket ID: 2.97" (75 mm) Efficiency Beta 2: 10 Micron P LUBE SPIN-ON FULL FLOW TOYOTA : 4.25" (108 mm) Thread Size: M30 x 1.5 : 5.51" (140 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.37" (86 mm) Gasket ID: 2.95" (75 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 48 Micron P LUBE SPIN-ON FULL FLOW KOMATSU : 4.24" (108 mm) Thread Size: 1 1/8-16 : 6.56" (167 mm) Relief Valve Setting: 27 PSI (1.86 Bar) Gasket : 3.94" (100 mm) Gasket ID: 3.58" (91 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P LUBE SPIN-ON FULL FLOW KOMATSU : 3.70" (94 mm) Thread Size: 1-12 : 3.75" (95 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW NISSAN H8911 : 3.24" (82 mm) Thread Size: 3/4-16 : 3.90" (99 mm) Gasket : 2.26" (57 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P LUBE SPIN-ON FULL FLOW FIAT ALLIS : 4.27" (108 mm) Thread Size: M30 x 2 : 9.00" (229 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.96" (101 mm) Gasket ID: 3.59" (91 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 35 Micron Page 194

197 P LUBE SPIN-ON FULL FLOW WHITE : 4.27" (108 mm) Thread Size: 7/8-14 : 8.06" (205 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.82" (72 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW KUBOTA : 3.24" (82 mm) Thread Size: 3/4-16 : 4.40" (112 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.58" (66 mm) Gasket ID: 2.26" (57 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW ISUZU : 3.54" (90 mm) Thread Size: M20 x 1.5 : 4.92" (125 mm) Gasket : 3.42" (87 mm) Gasket ID: 3.01" (76 mm) Efficiency 50%: 19 Micron P LUBE SPIN-ON FULL FLOW IHC R93 : 3.73" (95 mm) Thread Size: 1-12 : 4.22" (107 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.78" (71 mm) Gasket ID: 2.43" (62 mm) Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW KUBOTA , : 3.28" (83 mm) Thread Size: M20 x 1.5 : 2.78" (71 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.52" (64 mm) Gasket ID: 2.26" (57 mm) Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON NAVISTAR C91 : 4.36" (111 mm) Thread Size: 1-14 : 5.05" (128 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR SPIN-ON FORD F1HZ9365A, CARRIER : 4.36" (111 mm) Thread Size: 1-14 : 5.10" (130 mm) Efficiency 50%: 10 Micron P LUBE SPIN-ON FULL FLOW FORD E7HZ6731A (BRAZIALIAN CAB FORWARD) : 4.25" (108 mm) Thread Size: 1-12 : 6.00" (152 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P FUEL/WATER SEPARATOR SPIN-ON THERMO KING : 3.69" (94 mm) Thread Size: M22 x 1.5 : 6.42" (163 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY NATURAL GAS FUELED CUMMINS ENGINES : 3.78" (96 mm) Thread Size: 1 1/2-16 : 7.35" (187 mm) Gasket : 3.47" (88 mm) Gasket ID: 2.99" (76 mm) P FUEL/WATER SEPARATOR CARTRIDGE DAVCO 380 AND 382 SERIES FUEL PROCESSORS : 3.82" (97 mm) ID: 0.66" (17 mm) : 7.00" (178 mm) Efficiency 99%: 25 Micron P FUEL/WATER SEPARATOR CARTRIDGE DAVCO 380 AND 382 SERIES FUEL ROCESSORS : 3.82" (97 mm) ID: 0.66" (17 mm) : 7.00" (178 mm) Efficiency 99%: 50 Micron P FUEL/WATER SEPARATOR SPIN-ON GMC , ISUZU : 4.02" (102 mm) Thread Size: 3 3/8-8 : 5.60" (142 mm) Gasket : 3.77" (96 mm) Gasket ID: 3.50" (89 mm) Efficiency 99%: 4 Micron P LUBE CARTRIDGE Mercedes-Benz A : 2.36" (60 mm) ID: 0.63" (16 mm) : 3.94" (100 mm) P FUEL CARTRIDGE PRIMARY YANMAR : 2.87" (73 mm) ID: 0.46" (12 mm) : 3.14" (80 mm) Page 195

198 P FUEL/WATER SEPARATOR SPIN-ON RACOR R45 SERIES : 4.25" (108 mm) Thread Size: 1-14 : 3.50" (89 mm) Efficiency 50%: 2 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR R90 SERIES : 4.36" (111 mm) Thread Size: 1-14 : 6.10" (155 mm) Efficiency 50%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR R120 SERIES : 4.38" (111 mm) Thread Size: 1-14 : 8.50" (216 mm) Efficiency 50%: 10 Micron P LUBE CARTRIDGE 750 SERIES CARTRIDGE BYPASS : 7.72" (196 mm) ID: 0.86" (22 mm) : 15.06" (383 mm) Efficiency 50%: 5 Micron P LUBE CARTRIDGE 750 SERIES PREMIUM BYPASS : 7.72" (196 mm) ID: 0.86" (22 mm) : 15.06" (383 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR CARTRIDGE Fleetguard FS19559 : 4.62" (117 mm) ID: 6.47" (164 mm) : 0.65" (17 mm) P FUEL/WATER SEPARATOR SPIN-ON JOHN DEERE RE509596, RE : 4.24" (108 mm) Thread Size: 1-12 : 10.38" (264 mm) Efficiency 99%: 5 Micron P FUEL/WATER SEPARATOR CARTRIDGE CATERPILLAR : 3.27" (83 mm) ID: 2.73" (69 mm) : 6.65" (169 mm) Overall : 7.67" (195 mm) Efficiency 50%: 5 Micron P HYDRAULIC SPIN-ON JOHN DEERE LVA11522 : 4.65" (118 mm) Thread Size: 1 1/2-16 : 6.29" (160 mm) P FUEL/WATER SEPARATOR CARTRIDGE John Deere RE65431 : 3.27" (83 mm) ID: 2.73" (69 mm) : 6.65" (169 mm) Overall : 7.67" (195 mm) Efficiency 99%: 150 Micron P FUEL CARTRIDGE PRIMARY DETROIT DIESEL : 3.82" (97 mm) ID: 0.66" (17 mm) : 7.00" (178 mm) Efficiency 99%: 16 Micron P LUBE SPIN-ON FULL FLOW JOHN DEERE RE519626, RE : 3.66" (93 mm) Thread Size: M24 x 1.5 : 5.35" (136 mm) Relief Valve Setting: 24 PSI (1.70 Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.98" (126 mm) Overall : 6.00" (152 mm) Efficiency 50%: 2 Micron P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE : 3.27" (83 mm) ID: 2.72" (69 mm) : 4.98" (126 mm) Overall : 6.00" (152 mm) Efficiency 50%: 10 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES : 3.27" (83 mm) ID: 2.00" (51 mm) : 8.24" (209 mm) Efficiency 50%: 15 Micron P FUEL CARTRIDGE PRIMARY MERCEDES : 3.74" (95 mm) ID: 0.55" (14 mm) : 7.97" (202 mm) Efficiency 99%: 15 Micron P LUBE CARTRIDGE FULL FLOW METAL FREE LUBE : 3.26" (83 mm) ID: 2.20" (56 mm) : 7.59" (193 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES, M.A.N., CLAAS : 3.27" (83 mm) ID: 0.83" (21 mm) : 7.60" (193 mm) Page 196

199 P LUBE CARTRIDGE FULL FLOW M.A.N : 4.76" (121 mm) ID: 2.20" (56 mm) : 5.67" (144 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES, DEMAG, LIEBHERR, O&K, RVI, CLAAS : 3.27" (83 mm) : 5.39" (137 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES OM SERIES ENGINES : 3.27" (83 mm) ID: 0.83" (21 mm) : 5.16" (131 mm) P LUBE CARTRIDGE FULL FLOW MERCEDES : 3.27" (83 mm) ID: 1.59" (40 mm) : 5.80" (147 mm) Efficiency 99%: 40 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES : 4.76" (121 mm) ID: 2.24" (57 mm) : 9.76" (248 mm) Efficiency 99%: 30 Micron P FUEL/WATER SEPARATOR CARTRIDGE LIEBHERR : 3.27" (83 mm) ID: 2.72" (69 mm) : 4.75" (121 mm) Overall : 5.77" (147 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR CARTRIDGE LIEBHERR : 3.27" (83 mm) ID: 2.73" (69 mm) : 4.75" (121 mm) Overall : 5.77" (147 mm) Efficiency 95%: 30 Micron P FUEL/WATER SEPARATOR CARTRIDGE LIEBHERR : 3.27" (83 mm) ID: 2.73" (69 mm) : 6.41" (163 mm) Overall : 7.43" (189 mm) Efficiency 50%: 2 Micron P FUEL SPIN-ON PRIMARY CUMMINS , ISC, ISL ISM ENGINES : 3.66" (93 mm) Thread Size: 7/8-14 : 6.85" (174 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Efficiency 99%: 3 Micron P LUBE SPIN-ON FULL FLOW CUMMINS QSK ENGINES : 4.79" (122 mm) Thread Size: M90 x 2.0 : 11.85" (301 mm) Efficiency 50%: 7 Micron P LUBE SPIN-ON FULL FLOW KUBOTA : 3.15" (80 mm) Thread Size: M20 x 1.5 : 3.15" (80 mm) Relief Valve Setting: Y/N Gasket : 2.48" (63 mm) P LUBE SPIN-ON BYPASS CUMMINS , : 4.65" (118 mm) Thread Size: 1 3/8-16 : 10.24" (260 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 14 Micron P LUBE SPIN-ON FULL FLOW JOHN DEERE RE : 3.66" (93 mm) Thread Size: M92 x 2.5-6H : 5.94" (151 mm) Efficiency 99%: 40 Micron P FUEL CARTRIDGE PRIMARY MERCEDES A , SPRINTER VAN PRE 2004 : 3.59" (91 mm) ID: 0.44" (11 mm) : 4.78" (121 mm) P GILLIG : 3.98" (101 mm) ID: 1.10" (28 mm) : 5.06" (129 mm) ID Width: 1.31" (33 mm) Efficiency Beta 75: 47 Micron P FUEL SPIN-ON PRIMARY DAVCO M16 X MICRON : 3.18" (81 mm) Thread Size: M16 x 1.5-6H : 6.93" (176 mm) Gasket : 2.91" (74 mm) Gasket ID: 2.52" (64 mm) Efficiency 99%: 10 Micron P FUEL SPIN-ON PRIMARY DAVCO M16 X MICRON : 3.18" (81 mm) Thread Size: M16 x 1.5-6H : 6.93" (176 mm) Gasket : 2.91" (74 mm) Gasket ID: 2.52" (64 mm) Efficiency 99%: 25 Micron P LUBE SPIN-ON FULL FLOW FORD E3TZ6731A, IHC 6.9L C1 : 4.24" (108 mm) Thread Size: 1 1/2-16 : 5.63" (143 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 50%: 20 Micron Page 197

200 P FUEL/WATER SEPARATOR CARTRIDGE CHRYSLER AD : 3.39" (86 mm) ID: 0.83" (21 mm) : 4.09" (104 mm) Efficiency 99%: 10 Micron P FUEL SPIN-ON PRIMARY LINDE : 3.71" (94 mm) Thread Size: 1-12 : 5.97" (152 mm) P KOMATSU : 5.91" (150 mm) ID: 3.62" (92 mm) : 7.87" (200 mm) P LUBE SPIN-ON FULL FLOW CATERPILLAR C13 ENGINES : 5.32" (135 mm) Thread Size: 1 1/2-16 : 9.61" (244 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (99 mm) Efficiency 99%: 21 Micron P LUBE CARTRIDGE MERCEDES A : 4.06" (103 mm) : 5.80" (146 mm) P FUEL/WATER SEPARATOR SPIN-ON CHRYSLER AA, MOPAR : 4.47" (114 mm) Thread Size: M105 X 4 : 9.25" (235 mm) Efficiency 99%: 7 Micron P FUEL/WATER SEPARATOR CARTRIDGE DGE LIGHT TRUCK, CHRYSLER AA : 3.41" (87 mm) ID:.82" (21 mm) Efficiency 99%: 7 Micron : 4.10" (104 mm) P FUEL CARTRIDGE MERCEDES : 3.58" (91 mm) ID: 3.39" (86 mm) : 3.94" (100 mm) P FUEL SPIN-ON SECONDARY FORD, IHC 6.9L C1 : 4.28" (109 mm) Thread Size: 7/8-14 : 4.60" (117 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 99%: 10 Micron P LUBE CARTRIDGE FULL FLOW CAT 4J-0816 : 3.12" (79 mm) ID: 1.83" (46 mm) : 9.00" (229 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW GM 2007 LIGHT TRUCK : 3.00" (76 mm) Thread Size: M22 x 1.5 : 3.26" (83 mm) P FUEL/WATER SEPARATOR CARTRIDGE DAVCO 380/382 and CUMMINS FH230 FUEL PRO : 3.81" (97 mm) : 7.03" (179 mm) ID: 0.66" (17 mm) Efficiency 99%: 10 Micron P LUBE CARTRIDGE MERCEDES : 2.79" (71 mm) ID: 1.22" (31 mm) : 3.74" (95 mm) Efficiency 99%: 38 Micron P LUBE CARTRIDGE MERCEDES : 2.59" (66 mm) ID: 1.22" (31 mm) : 4.52" (115 mm) Efficiency 99%: 39 Micron P TRANSMISSION FILTER KIT MERCEDES WITH TRANSMISSION Height: 7.73" (196 mm) Width: 4.90" (125 mm) Depth: 1.99" (51 mm) P LUBE SPIN-ON FULL FLOW GMC : 3.66" (93 mm) Thread Size: 13/16-16 : 7.87" (200 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY DEUTZ (FELT) : 2.22" (56 mm) ID: 0.53" (13 mm) : 4.49" (114 mm) P FUEL CARTRIDGE PRIMARY DEUTZ, MERCEDES, ATLAS-COPCO, IHC : 3.30" (84 mm) ID: 0.47" (12 mm) : 5.50" (140 mm) Efficiency 99%: 9 Micron Page 198

201 P FUEL SPIN-ON PRIMARY CASE A39868, DAVID BROWN : 3.81" (97 mm) Thread Size: 13/16-18 : 4.50" (114 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 28 Micron P LUBE SPIN-ON FULL FLOW ATLAS COPCO , FORD, MACK : 3.66" (97 mm) Thread Size: 3/4-16 : 3.58" (91 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS ENGINES : 3.66" (93 mm) Thread Size: 1-14 : 9.71" (247 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (63 mm) Efficiency 99%: 7 Micron P FUEL SPIN-ON SECONDARY GMC : 3.66" (93 mm) Thread Size: 13/16-12 : 4.21" (107 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Efficiency 99%: 16 Micron P FUEL SPIN-ON PRIMARY GMC , 8.2L : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY GMC 6.2L : 3.03" (77 mm) Thread Size: M16 x 1.5 : 4.87" (124 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Efficiency 99%: 9 Micron P FUEL SPIN-ON PRIMARY GMC 6.2L : 3.81" (97 mm) Thread Size: 1-12 : 6.08" (154 mm) Gasket : 3.55" (90 mm) Gasket ID: 3.18" (81 mm) Efficiency 99%: 38 Micron P LUBE SPIN-ON FULL FLOW GMC , Detroit Diesel Engines : 4.67" (119 mm) Thread Size: 1 1/2-12 : 6.28" (159 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 14 Micron P TRANSMISSION CARTRIDGE DDA AC PF951 : 4.30" (109 mm) ID: 1.44" (37 mm) Efficiency 99%: 25 Micron : 9.06" (230 mm) P FUEL BOX PRIMARY GMC 6.2 DIESEL, STANADYNE Width: 2.83" (72 mm) : 2.43" (62 mm) Height: 4.61" (117 mm) Efficiency 99%: 22 Micron P FUEL SPIN-ON PRIMARY DETROIT DIESEL : 4.67" (119 mm) Thread Size: 1 1/4-12 : 8.94" (227 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 30 Micron P FUEL SPIN-ON SECONDARY FORD, GMC : 4.67" (119 mm) Thread Size: 1 1/16-16 : 8.94" (227 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 16 Micron P TRANSMISSION FILTER KIT GM LIGHT TRUCK Width: 7.00" (178 mm) Height: 8.53" (217 mm) Depth: 6.58" (167 mm) : 5.00" (127 mm) P LUBE SPIN-ON FULL FLOW DGE LIGHT TRUCK : 3.72" (95 mm) Thread Size: 3/4-16 : 3.95" (100 mm) Relief Valve Setting: 8-16 PSI ( Bar) Gasket : 2.84" (72 mm) Gasket ID: 2.48" (63 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW GM LIGHT TRUCK : 3.78" (96 mm) Thread Size: 13/16-16 : 5.14" (131 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 35 Micron P LUBE SPIN-ON FULL FLOW FORD LIGHT TRUCK : 3.67" (93 mm) Thread Size: M22 x 1.5 : 3.58" (91 mm) Relief Valve Setting: 15 PSI (1.03 Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron Page 199

202 P FUEL/WATER SEPARATOR CARTRIDGE FORD NAVISTAR LIGHT TRUCK : 3.56" (90 mm) ID: 0.56" (14 mm) : 3.99" (101 mm) Efficiency 50%: 7 Micron P FUEL IN-LINE FORD LIGHT TRUCK : 3.08" (78 mm) Inlet Size: 5/16 Overall : 6.77" (172 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL/WATER SEPARATOR SPIN-ON DGE LIGHT TRUCK WITH CUMMINS DIESEL : 3.78" (96 mm) Thread Size: M20 x 1.5 : 4.65" (118 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 95%: 20 Micron P LUBE SPIN-ON COMBINATION ISUZU , FULL FLOW BYPASS COMBO : 4.86" (123 mm) Thread Size: 1 1/2-12 : 5.87" (149 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 20 Micron P FUEL IN-LINE CUMMINS , CASE IH STX : 1.94" (49 mm) Inlet Size: 3/8 Hose, 10 Hose Overall : 3.93" (100 mm) : 2.36" (60 mm) Outlet Size: 3/8 Hose, 10 Hose Efficiency 99%: 150 Micron P LUBE SPIN-ON FULL FLOW VALMET : 3.75" (95 mm) Thread Size: M24 x 1.5 : 6.88" (175 mm) Relief Valve Setting: PSI ( Bar) Anti Drain Valve: Yes Y/N P FUEL/WATER SEPARATOR SPIN-ON CUMMINS CELECT & QUANTUM ENGINE APPLICATIONS : 3.66" (93 mm) Thread Size: 1-14 : 9.70" (246 mm) Stand Pipe: Yes Y/N Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS CELECT & QUANTUM ENGINE APPLICATIONS : 3.68" (93 mm) Thread Size: 1-14 : 7.98" (203 mm) Stand Pipe: Yes Y/N Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS ISM SERIES ENGINES : 3.69" (94 mm) Thread Size: 1-14 : 9.71" (247 mm) Stand Pipe: Yes Y/N Gasket : 3.69" (94 mm) Gasket ID: 2.83" (72 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 4.74" (120 mm) Thread Size: 1 1/4-12 : 12.32" (313 mm) Gasket : 4.39" (112 mm) Gasket ID: 3.87" (98 mm) Efficiency 99%: 10 Micron P LUBE CARTRIDGE FULL FLOW FORD C5TE6744A : 4.59" (117 mm) ID: 0.75" (19 mm) : 4.87" (124 mm) P FUEL/WATER SEPARATOR SPIN-ON CUMMINS ISC ENGINES : 3.69" (94 mm) Thread Size: 1-14 : 9.38" (238 mm) Stand Pipe: Yes Y/N Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON BOBCAT , CNH : 3.02" (77 mm) Thread Size: M16 x 1.5 : 3.79" (96 mm) Efficiency 99%: 20 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 4.65" (118 mm) Thread Size: M85 x 2 : 11.57" (294 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 25 Micron P LUBE SPIN-ON FULL FLOW BOBCAT : 3.66" (93 mm) Thread Size: 3/4-16 : 3.30" (84 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Page 200

203 P FUEL BOX PRIMARY GMC V8-379, STANADYNE Width: 3.28" (83 mm) : 2.64" (67 mm) Height: 6.31" (160 mm) Efficiency 99%: 22 Micron P KOMATSU , : 3.94" (100 mm) ID: 2.34" (59 mm) : 8.27" (210 mm) Efficiency Beta 75: 30 Micron P LUBE SPIN-ON FULL FLOW DEUTZ : 4.33" (110 mm) Thread Size: 1 1/8-16 : 10.08" (256 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.02" (102 mm) Gasket ID: 3.62" (92 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P FUEL SPIN-ON SECONDARY CASE A58713 : 3.81" (97 mm) Thread Size: 15/16-16 : 5.61" (142 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 12 Micron P FUEL BOX PRIMARY JOHN DEERE AR50041, STANADYNE Width: 3.71" (94 mm) : 3.15" (80 mm) Height: 4.95" (126 mm) Efficiency 99%: 22 Micron P KOMATSU , : 5.90" (150 mm) ID: 4.34" (110 mm) : 11.81" (300 mm) Efficiency Beta 75: 30 Micron P KOMATSU : 3.94" (100 mm) ID: 1.65" (42 mm) : 9.12" (232 mm) Efficiency Beta 75: 30 Micron P KOMATSU : 3.94" (100 mm) ID: 2.32" (59 mm) : 10.94" (278 mm) Efficiency Beta 2: 9 Micron P FUEL CARTRIDGE PRIMARY CONTINENTAL 12395HE : 3.01" (76 mm) ID: 1.04" (26 mm) : 9.70" (246 mm) P FUEL CARTRIDGE PRIMARY MASSEY FERGUSON M91 : 3.97" (101 mm) ID: 0.54" (14 mm) : 5.00" (127 mm) P FUEL CARTRIDGE PRIMARY CHRYSLER : 2.75" (70 mm) ID: 0.81" (21 mm) : 3.37" (86 mm) P FUEL CARTRIDGE PRIMARY PERKINS : 3.50" (89 mm) ID: 0.75" (19 mm) : 2.76" (70 mm) P FUEL SPIN-ON PRIMARY NISSAN FL : 3.68" (93 mm) Thread Size: 1-14 : 6.85" (174 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.47" (63 mm) P CASE IH A44012 : 4.51" (115 mm) ID: 0.66" (17 mm) : 7.06" (179 mm) P CASE IH R92 : 7.24" (184 mm) ID: 1.49" (38 mm) : 3.23" (82 mm) Width: 4.62" (117 mm) P CASE IH A46403 : 4.52" (115 mm) ID: 2.27" (58 mm) : 7.12" (181 mm) P CASE IH R93 : 7.24" (184 mm) ID: 1.49" (38 mm) : 2.48" (63 mm) Page 201

204 P ALLIS CHALMERS : 5.08" (129 mm) ID: 2.81" (71 mm) : 8.97" (228 mm) P GM : 2.75" (70 mm) ID: 0.31" (8 mm) : 3.36" (85 mm) P LUBE SPIN-ON FULL FLOW ZETTELMEYER : 3.82" (97 mm) Thread Size: 3/4-16 : 3.98" (101 mm) Relief Valve Setting: 36 PSI (2.48 Bar) Gasket : 2.80" (71 mm) Gasket ID: 2.40" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 10 Micron P HYDRAULIC SPIN-ON REXNORD : 3.67" (93 mm) Thread Size: 1-12 : 3.75" (95 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency Beta 75: 47 Micron P HYDRAULIC SPIN-ON CLARK : 3.68" (93 mm) Thread Size: 1-12 : 8.00" (203 mm) Gasket : 2.84" (72 mm) P KOMATSU , : 5.90" (150 mm) ID: 4.34" (110 mm) : 17.72" (450 mm) Efficiency Beta 75: 30 Micron P JOHN DEERE AT62042 : 4.52" (115 mm) ID: 1.75" (44 mm) : 7.18" (182 mm) P CATERPILLAR : 4.52" (115 mm) ID: 2.27" (58 mm) : 9.00" (229 mm) Efficiency Beta 75: 47 Micron P CASE IH L52029 : 4.52" (115 mm) ID: 0.54" (14 mm) : 9.00" (229 mm) Efficiency Beta 75: 47 Micron P JOHN DEERE AT45811 : 4.52" (115 mm) ID: 2.22" (56 mm) : 7.44" (189 mm) P HYDRAULIC SPIN-ON GM : 4.67" (119 mm) Thread Size: 1 5/16-12 : 10.30" (262 mm) Gasket : 4.19" (106 mm) Gasket ID: 3.66" (93 mm) Efficiency Beta 2: 6 Micron P HYDRAULIC SPIN-ON FLEETGUARD HF6523 : 3.72" (94 mm) Thread Size: 1-12 : 8.09" (205 mm) P HYDRAULIC SPIN-ON JOHN DEERE RE17380 : 3.67" (93 mm) Thread Size: 1-12 : 5.66" (144 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON JOHN DEERE AT : 3.86" (98 mm) Thread Size: 1 1/2-16 : 9.50" (241 mm) Efficiency Beta 2: 4 Micron P HYDRAULIC SPIN-ON JOHN DEERE AT : 5.00" (127 mm) Thread Size: 1 1/2-16 : 8.22" (209 mm) Gasket : 4.60" (117 mm) Efficiency Beta 2: 8 Micron P HYDRAULIC SPIN-ON JOHN DEERE AT : 4.89" (124 mm) Thread Size: 1 1/2-16 : 8.22" (209 mm) Gasket : 4.60" (117 mm) Efficiency Beta 2: 5 Micron Page 202

205 P HITACHI : 2.87" (73 mm) ID: 1.38" (35 mm) : 8.27" (210 mm) P LUBE SPIN-ON FULL FLOW OPEL : 3.00" (76 mm) Thread Size: 3/4-16 : 3.42" (87 mm) P LUBE SPIN-ON FULL FLOW ROLLS ROYCE CV2473 : 4.24" (108 mm) Thread Size: M30 x 1.5 : 7.48" (190 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.05" (103 mm) Gasket ID: 3.42" (87 mm) Efficiency 50%: 15 Micron P LUBE SPIN-ON FULL FLOW ISUZU X : 4.33" (110 mm) Thread Size: M20 x 1.5 : 6.38" (162 mm) Gasket : 4.13" (105 mm) Gasket ID: 3.74" (95 mm) Efficiency 99%: 5 Micron P LUBE SPIN-ON FULL FLOW NAVISTAR C1 : 3.67" (93 mm) Thread Size: 1-12 : 8.00" (203 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.47" (63 mm) P LUBE SPIN-ON FULL FLOW VOLVO : 4.24" (108 mm) Thread Size: 1 1/8-16 : 7.02" (178 mm) Gasket : 3.94" (100 mm) Gasket ID: 3.56" (90 mm) P LUBE SPIN-ON FULL FLOW KOMATSU/KOMATSU DRESSER Z1402OF105 : 4.24" (108 mm) Thread Size: M20 x 1.5 : 5.62" (143 mm) Relief Valve Setting: 20 PSI (1.38 Bar) Gasket : 3.94" (100 mm) Gasket ID: 3.56" (90 mm) Anti Drain Valve: Yes Y/N P LUBE SPIN-ON FULL FLOW DAEWOO : 3.67" (93 mm) Thread Size: 1-16 : 6.87" (174 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P LUBE SPIN-ON FULL FLOW NISSAN FL201Z9010 : 4.24" (108 mm) Thread Size: 1 1/8-16 : 6.73" (171 mm) Gasket : 4.01" (102 mm) Gasket ID: 3.60" (91 mm) Efficiency 99%: 37 Micron P LUBE SPIN-ON FULL FLOW NISSAN 15201Z9008 : 4.24" (108 mm) Thread Size: 3/4-16 : 6.59" (167 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW KUBOTA : 3.67" (93 mm) Thread Size: 3/4-16 : 3.39" (86 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P LUBE CARTRIDGE DELUXE WD30 : 4.03" (102 mm) ID: 0.66" (17 mm) : 4.67" (119 mm) P LUBE CARTRIDGE FULL FLOW CHRYSLER : 2.98" (76 mm) ID: 0.78" (20 mm) : 4.07" (103 mm) P LUBE CARTRIDGE FULL FLOW PERKINS : 3.50" (89 mm) ID: 1.34" (34 mm) : 3.78" (96 mm) P LUBE SPIN-ON FULL FLOW CATERPILLAR 9M-8755 : 3.67" (93 mm) Thread Size: 7/8-14 : 3.75" (95 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 25 Micron P KOMATSU : 3.94" (100 mm) ID: 1.62" (41 mm) : 9.12" (232 mm) Efficiency Beta 75: 30 Micron Page 203

206 P LUBE CARTRIDGE FULL FLOW LEYLAND : 2.75" (70 mm) ID: 1.31" (33 mm) : 3.33" (85 mm) P LUBE CARTRIDGE FULL FLOW CASE IH R91 : 2.30" (58 mm) ID: 0.44" (11 mm) : 4.63" (118 mm) P LUBE CARTRIDGE FULL FLOW CASE IH A40902 : 2.97" (75 mm) ID: 1.07" (27 mm) : 5.64" (143 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW KOMATSU/KOMATSU DRESSER : 3.67" (93 mm) Thread Size: 1-12 : 6.88" (175 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.85" (72 mm) Gasket ID: 2.47" (63 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 45 Micron P LUBE SPIN-ON FULL FLOW KUBOTA : 3.70" (94 mm) Thread Size: 3/4-16 : 4.33" (110 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.80" (71 mm) Gasket ID: 2.48" (63 mm) Anti Drain Valve: Yes Y/N P LUBE SPIN-ON FULL FLOW CASE IH A62423 : 4.24" (108 mm) Thread Size: 7/8-14 : 8.05" (204 mm) Relief Valve Setting: 7-9 PSI ( Bar) Gasket : 2.82" (72 mm) Gasket ID: 2.46" (62 mm) Anti Drain Valve: Yes Y/N P LUBE SPIN-ON FULL FLOW HONDA, ISUZU, MAZDA : 3.67" (93 mm) Thread Size: M20 x 1.5 : 3.16" (80 mm) Relief Valve Setting: PSI (0.93 Bar) Gasket : 3.59" (91 mm) P LUBE SPIN-ON FULL FLOW GM , : 2.99" (76 mm) Thread Size: 13/16-16 : 3.41" (87 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P COOLANT SPIN-ON MACK Without Chemical : 3.67" (93 mm) Thread Size: 3/4-20 : 5.32" (135 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P FUEL/WATER SEPARATOR CARTRIDGE CHRYSLER AA : 4.23" (107 mm) ID: 0.75" (19 mm) : 4.34" (110 mm) Gasket : 2.01" (51 mm) Efficiency 99%: 10 Micron P FUEL SPIN-ON PRIMARY Caterpillar 1R-0749 : 3.68" (93 mm) Thread Size: 1-14 : 9.43" (240 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 3 Micron P FUEL SPIN-ON PRIMARY Caterpillar 1R-0753 : 3.68" (93 mm) Thread Size: 7/8-14 : 9.43" (240 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 2 Micron P FUEL SPIN-ON SECONDARY Caterpillar 1R-0750 : 3.68" (93 mm) Thread Size: 1-14 : 6.95" (177 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 2 Micron P FUEL SPIN-ON PRIMARY Caterpillar 1R0759 : 3.15" (80 mm) Thread Size: 7/8-14 : 6.93" (176 mm) Gasket : 2.89" (74 mm) Gasket ID: 2.50" (64 mm) Efficiency 99%: 3 Micron P FUEL SPIN-ON PRIMARY Caterpillar 1R-0755 : 5.34" (136 mm) Thread Size: 1 3/8-16 : 12.19" (310 mm) Gasket : 4.28" (109 mm) Gasket ID: 3.90" (99 mm) Efficiency 99%: 2 Micron Page 204

207 P FUEL CARTRIDGE PRIMARY Caterpillar 1R-0756 : 3.90" (99 mm) ID: 1.61" (41 mm) : 9.23" (234 mm) Efficiency 99%: 2 Micron P FUEL SPIN-ON PRIMARY NAVISTAR C1 : 4.24" (108 mm) Thread Size: 7/8-14 : 7.14" (181 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.45" (62 mm) Efficiency 99%: 9 Micron P HYDRAULIC SPIN-ON FORD : 3.69" (94 mm) Thread Size: 1 1/8-16 : 5.26" (134 mm) Relief Valve Setting: 7-9 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 20 Micron P HYDRAULIC SPIN-ON CATERPILLAR : 3.75" (95 mm) Thread Size: 13/16-16 : 4.57" (116 mm) Relief Valve Setting: 20 PSI (1.38 Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON HYSTER : 3.82" (97 mm) Thread Size: 3/4-16 : 5.56" (141 mm) Relief Valve Setting: 23 PSI (1.59 Bar) Gasket : 2.42" (61 mm) Gasket ID: 2.82" (72 mm) Anti Drain Valve: Yes Y/N Efficiency Beta 2: 20 Micron P FUEL/WATER SEPARATOR SPIN-ON CASE, CUMMINS : 3.76" (96 mm) Thread Size: 13/16-18 : 6.01" (153 mm) Efficiency 99%: 13 Micron P ALLISON TRANS : 2.87" (73 mm) ID: 1.18" (30 mm) : 8.44" (214 mm) Efficiency Beta 2: 25 Micron P HITACHI , KOBELCO 24046Z73 : 5.90" (150 mm) ID: 4.34" (110 mm) : 17.72" (450 mm) Efficiency Beta 75: 30 Micron P HITACHI : 5.90" (150 mm) ID: 4.34" (110 mm) : 17.72" (450 mm) Efficiency Beta 75: 30 Micron P FUEL SPIN-ON PRIMARY DAVCO : 4.25" (108 mm) Thread Size: 1-14 : 7.91" (201 mm) Gasket : 3.98" (101 mm) Gasket ID: 3.58" (91 mm) Efficiency 99%: 20 Micron P LUBE CARTRIDGE FULL FLOW FLEETLIFE FP : 6.01" (153 mm) ID: 3.50" (89 mm) : 14.50" (368 mm) Efficiency 50%: 25 Micron P FUEL CARTRIDGE PRIMARY NISSAN : 4.33" (110 mm) ID: 1.02" (26 mm) : 7.91" (201 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY NISSAN 16444Z9027 : 3.60" (91 mm) ID: 0.59" (15 mm) : 6.38" (162 mm) Efficiency 99%: 30 Micron P FUEL CARTRIDGE PRIMARY TOYOTA : 2.93" (74 mm) ID: 0.58" (15 mm) : 2.91" (74 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON BYPASS MITSUBISHI MD : 4.02" (102 mm) Thread Size: M26 x 1.5 : 5.31" (135 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.87" (73 mm) Gasket ID: 1.77" (45 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 16 Micron P LUBE CARTRIDGE HITACHI : 6.50" (165 mm) ID: 1.69" (43 mm) : 7.56" (192 mm) Page 205

208 P LUBE CARTRIDGE HITACHI : 6.30" (160 mm) ID: 0.28" (7 mm) : 5.20" (132 mm) Efficiency 50%: 5 Micron P CATERPILLAR : 2.01" (51 mm) ID: 0.91" (23 mm) : 2.95" (75 mm) P LUBE SPIN-ON FULL FLOW MITSUBISHI C , WP110 : 3.66" (93 mm) Thread Size: 1 1/8-16 : 6.81" (173 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.01" (51 mm) Efficiency 50%: 16 Micron P FUEL SPIN-ON PRIMARY NISSAN E01 : 3.85" (98 mm) Thread Size: 3/4-16 : 5.47" (139 mm) Gasket : 2.89" (74 mm) Gasket ID: 2.00" (51 mm) Efficiency 50%: 10 Micron P LUBE SPIN-ON FULL FLOW JOHN DEERE RE59754 : 3.70" (94 mm) Thread Size: 1 1/2-16 : 5.51" (140 mm) Gasket : 3.76" (96 mm) Gasket ID: 3.22" (82 mm) Efficiency 99%: 48 Micron P VME : 3.78" (96 mm) ID: 1.92" (49 mm) : 10.00" (254 mm) Efficiency Beta 75: 25 Micron P LUBE SPIN-ON FULL FLOW HINO : 4.67" (119 mm) Thread Size: 1 1/2-12 : 7.85" (199 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW DETROIT DIESEL 4000 SERIES ENGINE : 5.33" (135 mm) Thread Size: M45 x 1.5 : 12.13" (308 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 50%: 14 Micron P LUBE SPIN-ON FULL FLOW DD 2000 SERIES AND MARINE VERSION 4000 SERIES : 5.33" (135 mm) Thread Size: 1 1/2-16 : 12.13" (308 mm) Relief Valve Setting: PSI ( Bar) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 50%: 14 Micron P LUBE CARTRIDGE FULL FLOW CASE A21475, ALLIS CHALMERS : 3.93" (100 mm) ID: 0.87" (22 mm) : 4.81" (122 mm) Efficiency 99%: 40 Micron P HYDRAULIC SPIN-ON GRESEN, MFP, CROSS, DONALDSON LPS04 : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 4 Micron P HYDRAULIC SPIN-ON GRESEN, CROSS, DONALDSON LPS04 : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 10 Micron P HYDRAULIC SPIN-ON GRESEN, CROSS, DONALDSON LPS04 : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 25 Micron P LUBE SPIN-ON FULL FLOW FIAT , IVECO , HESSTON : 4.26" (108 mm) Thread Size: 3/4-16 : 7.25" (184 mm) Relief Valve Setting: 30 PSI (2.07 Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 23 Micron P LUBE SPIN-ON FULL FLOW FIAT , IVECO : 4.25" (108 mm) Thread Size: 1-12 : 9.13" (232 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 14 Micron Page 206

209 P FUEL SPIN-ON PRIMARY IVECO : 4.29" (109 mm) Thread Size: 3/4-16 : 7.20" (183 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.40" (61 mm) Efficiency 99%: 3 Micron P FUEL CARTRIDGE SECONDARY AC TP624 w/pleated Paper : 4.52" (115 mm) ID: 0.69" (18 mm) : 8.10" (206 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW CUMMINS , DET DIESEL ENG : 4.65" (118 mm) Thread Size: 1 1/2-12 : 10.24" (260 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 14 Micron P FUEL SPIN-ON PRIMARY CATERPILLAR 1R-0712 : 3.72" (95 mm) Thread Size: 1-14 : 9.43" (240 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 9 Micron P FUEL/WATER SEPARATOR CARTRIDGE JOHN DEERE RE61723, RE62424 : 3.27" (83 mm) ID: 2.73" (69 mm) : 6.04" (153 mm) Overall : 6.04" (153 mm) Efficiency 95%: 150 Micron P FUEL SPIN-ON PRIMARY CATERPILLAR 1R-0740 : 3.34" (85 mm) Thread Size: 1-14 : 7.09" (180 mm) Gasket : 2.50" (64 mm) Gasket ID: 2.11" (54 mm) Efficiency 99%: 9 Micron P FUEL/WATER SEPARATOR SPIN-ON GM : 3.69" (94 mm) Thread Size: 1-12 : 6.10" (155 mm) Gasket : 3.47" (88 mm) Gasket ID: 3.11" (79 mm) P FUEL/WATER SEPARATOR SPIN-ON CATERPILLAR : 3.69" (94 mm) Thread Size: 1-14 : 7.38" (187 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 4 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR R24S : 3.69" (94 mm) Thread Size: 1-14 : 5.52" (140 mm) Gasket : 3.43" (87 mm) Gasket ID: 3.11" (79 mm) P FUEL/WATER SEPARATOR SPIN-ON CATERPILLAR : 4.38" (111 mm) Thread Size: 1-14 : 11.30" (287 mm) Gasket : 3.50" (89 mm) Gasket ID: 3.18" (81 mm) Efficiency 99%: 5 Micron P FUEL CARTRIDGE PRIMARY JOHN DEERE AR45678 : 3.37" (86 mm) ID: 0.75" (19 mm) : 4.12" (105 mm) P FUEL SPIN-ON PRIMARY REPLACES WIX : 2.62" (67 mm) Thread Size: 1-14 : 4.34" (110 mm) Gasket : 1.00" (25 mm) Gasket ID: 0.80" (20 mm) P FUEL/WATER SEPARATOR SPIN-ON AMACO AO8 : 3.67" (93 mm) Thread Size: 1 3/8-12 : 7.50" (190 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 30 Micron P CATERPILLAR 1R0746 : 2.91" (74 mm) ID: 1.06" (27 mm) : 5.68" (144 mm) Efficiency Beta 2: 25 Micron P CATERPILLAR : 4.50" (114 mm) ID: 2.28" (58 mm) : 7.18" (182 mm) P TOWMOTOR : 1.63" (41 mm) ID: 0.87" (22 mm) : 3.44" (87 mm) Efficiency Beta 75: 25 Micron Page 207

210 P HYDRAULIC SPIN-ON IHC R1 : 3.66" (93 mm) Thread Size: 1-12 : 3.79" (96 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P HYDRAULIC SPIN-ON ZF , JOHN DEERE AT : 3.70" (94 mm) Thread Size: M24 x 1.5 : 5.96" (151 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (62 mm) P HYDRAULIC SPIN-ON HYSTER Hyster Lift Trucks : 3.70" (94 mm) Thread Size: 3/4-16 : 4.35" (110 mm) Relief Valve Setting: 16 PSI (1.10 Bar) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P FUEL IN-LINE CHRYSLER : 2.16" (55 mm) Inlet Size: 3/8 x 5/16 Overall : 6.37" (162 mm) Outlet Size: 3/8 x 5/16 Efficiency 50%: 23 Micron P FUEL IN-LINE ISUZU , : 2.32" (59 mm) Inlet Size: 5/16 Overall : 5.47" (139 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P LUBE CARTRIDGE FULL FLOW CASE : 3.98" (101 mm) ID: 1.27" (32 mm) : 2.78" (71 mm) P LUBE SPIN-ON FULL FLOW KOHLER , CUB CADET : 2.92" (74 mm) Thread Size: 3/4-16 : 4.53" (115 mm) Relief Valve Setting: 8 PSI (0.55 Bar) Gasket : 2.73" (69 mm) Gasket ID: 2.43" (62 mm) Anti Drain Valve: Yes Y/N P LUBE SPIN-ON FULL FLOW GM : 3.69" (94 mm) Thread Size: 13/16-16 : 5.20" (132 mm) Gasket : 3.44" (87 mm) Gasket ID: 3.10" (79 mm) P TRANSMISSION FILTER KIT FORD TRUCKS, VANS WITH E40D 2WD TRANSMISSION Width: 6.90" (175 mm) Height: 10.72" (272 mm) P FUEL/WATER SEPARATOR SPIN-ON GM , JOHN DEERE : 4.38" (111 mm) Thread Size: 1-14 : 8.21" (209 mm) Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR R12P : 3.00" (76 mm) Thread Size: M18 x 1.5 : 2.37" (60 mm) Efficiency 50%: 15 Micron P FUEL CARTRIDGE PRIMARY ISUZU : 1.87" (47 mm) ID: 0.51" (13 mm) : 1.77" (45 mm) P FUEL IN-LINE KOMATSU 20704A1100 : 1.88" (48 mm) Inlet Size: 0.50" (13) Overall : 4.34" (110 mm) Outlet Size: 0.50" (13 mm) Efficiency 99%: 150 Micron P FUEL IN-LINE GM : 2.00" (51 mm) Inlet Size: 0.50" (13) Overall : 4.35" (110 mm) Outlet Size: 0.50" (13) Efficiency 50%: 23 Micron P FUEL IN-LINE FORD F89Z9155A : 2.30" (58 mm) Inlet Size: 5/16 Overall : 7.00" (178 mm) Outlet Size: 5/16 P FUEL SPIN-ON PRIMARY JOHN DEERE RE : 4.22" (107 mm) Thread Size: 7/8-14 : 5.84" (148 mm) Gasket : 3.56" (90 mm) Gasket ID: 3.16" (80 mm) P FUEL SPIN-ON PRIMARY JOHN DEERE RE : 4.24" (108 mm) Thread Size: 1-12 : 8.90" (226 mm) Gasket : 3.57" (91 mm) Gasket ID: 3.15" (80 mm) P GM : 2.88" (73 mm) ID: 1.06" (27 mm) : 3.00" (76 mm) Page 208

211 P SCHROEDER NNS3 : 1.75" (44 mm) ID: 0.76" (19 mm) : 8.03" (204 mm) P KOMATSU : 3.94" (100 mm) ID: 2.34" (59 mm) : 8.31" (211 mm) P HYDRAULIC SPIN-ON KUBOTA : 3.73" (95 mm) Thread Size: 1 1/8-16 : 7.02" (178 mm) Gasket : 3.44" (87 mm) Gasket ID: 2.97" (75 mm) P HYDRAULIC SPIN-ON KUBOTA : 3.67" (93 mm) Thread Size: 1-12 : 7.35" (187 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P LUBE CARTRIDGE WAUKESHA 73759B : 5.00" (127 mm) ID: 0.69" (18 mm) : 7.88" (200 mm) P LUBE SPIN-ON FULL FLOW CATERPILLAR 1R1808 : 5.32" (135 mm) Thread Size: 1 1/2-16 : 12.13" (308 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 99%: 21 Micron P FUEL SPIN-ON PRIMARY BULK FUELTANKS WITH SEDIMENT DRAIN : 3.69" (94 mm) Thread Size: 1-12 : 7.44" (189 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency 99%: 22 Micron P FUEL/WATER SEPARATOR CARTRIDGE RACOR 2000SM : 1.78" (45 mm) ID: 0.50" (13 mm) : 2.68" (68 mm) Efficiency 99%: 30 Micron P FUEL/WATER SEPARATOR CARTRIDGE RACOR 2010SM : 3.25" (83 mm) ID: 0.63" (16 mm) : 2.44" (62 mm) Efficiency 99%: 30 Micron P FUEL/WATER SEPARATOR CARTRIDGE RACOR 2020 SERIES : 4.28" (109 mm) ID: 0.81" (21 mm) : 9.63" (245 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON FULL FLOW HONDA 15410MM90003 : 2.69" (68 mm) Thread Size: M20 x 1.5 : 2.78" (71 mm) Gasket : 2.42" (61 mm) Gasket ID: 2.23" (57 mm) P LUBE SPIN-ON FULL FLOW LISTER PETTER : 3.67" (93 mm) Thread Size: 3/4-16 : 2.22" (56 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.43" (62 mm) P LUBE SPIN-ON FULL FLOW CATERPILLAR 1R1807, MACK 485GB3236 : 4.25" (108 mm) Thread Size: 1 1/8-16 : 10.32" (262 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 21 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS ISC, ISM ENGINES - CONTAINS DRAIN AND SENSOR PORT : 3.66" (93 mm) Thread Size: 1-14 : 9.22" (234 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR CARTRIDGE RACOR 2040SM : 4.28" (109 mm) ID: 0.81" (21 mm) : 4.63" (118 mm) Efficiency 99%: 30 Micron P LUBE CARTRIDGE ISUZU/GMC CAB FORWARD HOUSING : 6.50" (165 mm) Thread Size: 3/8-24 : 8.75" (222 mm) P LUBE SPIN-ON FULL FLOW HINO : 4.65" (118 mm) Thread Size: 1 1/2-16 : 7.83" (199 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 39 Micron Page 209

212 P COOLANT SPIN-ON CUMMINS : 4.28" (109 mm) Thread Size: 11/16-16 : 7.89" (200 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron P COOLANT SPIN-ON CUMMINS : 3.70" (94 mm) Thread Size: 11/16-16 : 4.07" (103 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.69" (94 mm) Thread Size: 11/16-16 : 4.15" (105 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.70" (94 mm) Thread Size: 11/16-16 : 4.07" (103 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.70" (94 mm) Thread Size: 11/16-16 : 5.32" (135 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.70" (94 mm) Thread Size: 11/16-16 : 5.32" (135 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.70" (94 mm) Thread Size: 11/16-16 : 5.32" (135 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 11/16-16 : 7.87" (200 mm) Efficiency 50%: 20 Micron P COOLANT SPIN-ON NALCO NF2008, PENRAY NR2088, FLEETGUARD WF2131 : 3.69" (94 mm) Thread Size: 11/16-16 : 5.44" (138 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P COOLANT SPIN-ON VOLVO , : 3.66" (93 mm) Thread Size: M16 x 1.5 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) P LUBE SPIN-ON FULL FLOW DET. DIESEL 50 & 60 SERIES ENGINES, : 4.65" (118 mm) Thread Size: 1 5/8-12 : 10.24" (260 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 99%: 30 Micron P COOLANT SPIN-ON NAVISTAR : 3.69" (94 mm) Thread Size: 11/16-16 : 5.32" (135 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS SIGNATURE 600 ENGINE 8 UNITS DCA4 : 3.69" (94 mm) Thread Size: M36 x 2 : 5.76" (146 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY CUMMINS , FLEETGUARD FF2200 : 3.58" (91 mm) Thread Size: M72 x 2 : 9.00" (228 mm) Gasket : 3.74" (95 mm) Gasket ID: 3.10" (79 mm) Efficiency 99%: 8 Micron P FUEL SPIN-ON PRIMARY CUMMINS , FLEETGUARD FF2203 : 3.72" (95 mm) Thread Size: 1-14 : 5.78" (147 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P LUBE CARTRIDGE MACK ASET : 3.84" (98 mm) : 7.00" (178 mm) Page 210

213 P LUBE CARTRIDGE MACK E7 : 4.29" (109 mm) : 7.44" (189 mm) P FUEL SPIN-ON PRIMARY IHC C1 : 3.66" (93 mm) Thread Size: 1-14 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 17 Micron P FUEL SPIN-ON SECONDARY IHC C1 : 3.69" (94 mm) Thread Size: 1-14 : 8.69" (221 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Efficiency 99%: 15 Micron P LUBE SPIN-ON FULL FLOW CASE, DAVID BROWN, TOYOTA : 3.69" (94 mm) Thread Size: 3/4-16 : 4.36" (111 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 25 Micron P FUEL CARTRIDGE PRIMARY CAT 9M2341, FOR 9M2342 USE 2 P : 2.24" (57 mm) ID: 0.38" (10 mm) : 2.99" (76 mm) Efficiency 99%: 45 Micron P LUBE CARTRIDGE FULL FLOW GMC : 2.09" (53 mm) ID: 0.77" (20 mm) : 3.86" (98 mm) P LUBE CARTRIDGE FULL FLOW Allis Chalmers , : 3.98" (101 mm) ID: 1.41" (36 mm) : 9.25" (235 mm) Gasket : 4.74" (120 mm) Gasket ID: 4.30" (109 mm) P LUBE SPIN-ON BYPASS Thermo King : 3.69" (94 mm) Thread Size: 3/4-20 : 5.43" (138 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) Efficiency 50%: 21 Micron P TRANSMISSION FILTER KIT Toyota P VERSATILE SW6502 : 3.47" (88 mm) ID: 1.36" (35 mm) : 4.81" (122 mm) P FUEL IN-LINE GM : 2.28" (58 mm) Inlet Size: 5/8-18 Overall : 4.75" (121 mm) Outlet Size: 3/8 Efficiency 50%: 23 Micron P TRANSMISSION FILTER KIT Ford F2VY-7A098-A P TRANSMISSION FILTER KIT Ford E7GZ-7A098-A; Mazda FT P TRANSMISSION FILTER KIT Toyota P FUEL/WATER SEPARATOR SPIN-ON FORD E7HZ-9N184-B, E8HT-9J288-AA : 4.28" (109 mm) Thread Size: 15/16-16 : 10.31" (262 mm) Gasket : 2.85" (72 mm) Gasket ID: 2.48" (63 mm) P FUEL IN-LINE GMC : 2.17" (55 mm) Inlet Size: 3/8 Overall : 5.47" (137 mm) Outlet Size: M16 x 1.5 Efficiency 50%: 23 Micron P FUEL IN-LINE TOYOTA SONOMA PICKUP : 2.76" (70 mm) Inlet Size: M14 x 1.5 Overall : 4.29" (109 mm) Outlet Size: M14 x 1.5 Efficiency 50%: 23 Micron Page 211

214 P FUEL CARTRIDGE SECONDARY Ford D9PZ-9155-A; GMC : 0.64" (16 mm) : 0.79" (20 mm) Efficiency 50%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON Onan ; Toro : 3.02" (77 mm) Thread Size: M16 x 1.5 : 3.37" (86 mm) Gasket : 2.74" (70 mm) Gasket ID: 2.37" (60 mm) P LUBE CARTRIDGE SOCK Oliver AS; Waukesha ; White : 3.63" (92 mm) ID: 1.31" (33 mm) : 7.88" (200 mm) P FUEL IN-LINE AMC : 3.07" (78 mm) Inlet Size: 3/8 Overall : 6.06" (154 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P LUBE CARTRIDGE FULL FLOW NUGENT LUBE BAG REPLACEMENT CARTRIDGE : 5.06" (127 mm) ID: 0.07" (2 mm) : 12.13" (305 mm) P FUEL CARTRIDGE PRIMARY FORD SBA : 1.14" (29 mm) ID: 0.52" (13 mm) : 2.27" (58 mm) P TRANSMISSION FILTER KIT FORD E6TZA098B P LUBE CARTRIDGE FULL FLOW INTERNATIONAL C1 : 5.06" (129 mm) ID: 2.94" (75 mm) : 9.00" (229 mm) P LUBE SPIN-ON FULL FLOW HONDA : 3.67" (93 mm) Thread Size: M20 x 1.5 : 3.14" (80 mm) Gasket : 3.44" (87 mm) Gasket ID: 3.10" (79 mm) P LUBE CARTRIDGE FULL FLOW INTERNATIONAL R R91 : 2.90" (74 mm) ID: 1.12" (28 mm) : 5.53" (140 mm) P FUEL CARTRIDGE PRIMARY MURPHYMD13924A : 2.38" (60 mm) Thread Size: 1/4-18 : 37.25" (946 mm) P TRANSMISSION FILTER KIT GMC P FUEL IN-LINE GMC Height: 2.59" (66 mm) Inlet Location: Both Inverted Depth: 2.59" (66 mm) : 4.38" (111 mm) Inlet Size: 3/8 Outlet Size: 1/4 Efficiency 50%: 20 Micron P FUEL CARTRIDGE PRIMARY BALDWIN F919C : 1.88" (48 mm) ID: 0.38" (10 mm) : 7.88" (200 mm) P FUEL CARTRIDGE PRIMARY MACK 237GB29 237GB29-A : 3.78" (96 mm) ID: 1.08" (27 mm) : 6.16" (156 mm) P FUEL SPIN-ON PRIMARY GMC : 2.17" (55 mm) Thread Size: M16 x 1.5 : 4.75" (121 mm) Efficiency 50%: 12 Micron P FUEL IN-LINE BMW : 3.19" (81 mm) Inlet Size: 5/16 Overall : 6.26" (159 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL IN-LINE GMC ; Nissan D0100, Toyota : 4.05" (103 mm) Inlet Size: 9/32 Overall : 2.31" (59 mm) Outlet Size: 9/32 Efficiency 50%: 23 Micron Page 212

215 P FUEL CARTRIDGE PRIMARY WHITE AS : 1.45" (37 mm) ID: 0.70" (18 mm) : 3.82" (97 mm) P FUEL IN-LINE Chrysler MB129591; Hyundai : 2.75" (70 mm) Inlet Size: 11/32 Overall : 3.57" (91 mm) Outlet Size: 11/32 Efficiency 50%: 23 Micron P FUEL IN-LINE GMC : 2.28" (58 mm) Inlet Size: 0.38" (10 mm) Overall : 6.47" (164 mm) Outlet Size: 0.38" (10 mm) Efficiency 50%: 23 Micron P FUEL IN-LINE Mitsubishi MB504753, MB658689; Toyota , : 2.80" (71 mm) Inlet Size: M14 x 1.5 Overall : 4.37" (111 mm) Outlet Size: M12 x 1.25 Efficiency 50%: 23 Micron P FUEL CARTRIDGE PRIMARY GMC : 2.05" (52 mm) : 2.11" (53 mm) P FUEL SPIN-ON PRIMARY Chrysler MB504732, MB504750; Suzuki A00 : 2.80" (71 mm) : 5.04" (128 mm) Efficiency 50%: 12 Micron P FUEL CARTRIDGE PRIMARY Mitsubishi MB : 2.07" (53 mm) : 2.82" (72 mm) P LUBE CARTRIDGE FULL FLOW Case A22279; International R91 : 3.09" (79 mm) ID: 1.03" (26 mm) : 1.56" (40 mm) P FUEL CARTRIDGE PRIMARY Chrysler , , : 2.18" (55 mm) : 4.74" (120 mm) P LUBE SPIN-ON BYPASS Oliver ASA; White 1LA5507 : 3.79" (96 mm) Thread Size: 2 3/4-4 : 6.02" (153 mm) Gasket : 3.05" (77 mm) Gasket ID: 2.68" (68 mm) Efficiency 50%: 10 Micron P FUEL SPIN-ON PRIMARY NISSAN D00, FL40305D00 : 3.66" (93 mm) Thread Size: 3/4-16 : 5.19" (132 mm) Gasket : 2.83" (72 mm) P Ford C5NN-F882-B, C7NN-F882-A : 6.00" (152 mm) ID: 2.40" (61 mm) : 6.03" (153 mm) P International M1, C3 : 6.00" (152 mm) ID: 2.63" (67 mm) : 9.00" (229 mm) P Oliver A : 2.03" (52 mm) ID: 0.89" (22 mm) : 5.56" (141 mm) P HYDRAULIC SPIN-ON Ford F0NN-B486-AA : 3.66" (93 mm) Thread Size: 1 1/8-16 : 6.48" (164 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.73" (69 mm) Gasket ID: 2.41" (61 mm) P HYDRAULIC SPIN-ON Deutz : 3.66" (93 mm) Thread Size: 1-12 : 8.23" (209 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P LUBE SPIN-ON FULL FLOW CASE R1 : 3.69" (94 mm) Thread Size: 1-12 : 6.99" (178 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.42" (61 mm) P PARKER : 4.25" (108 mm) ID: 3.12" (79 mm) : 9.56" (243 mm) Gasket : 4.00" (102 mm) Gasket ID: 3.44" (87 mm) Page 213

216 P TRANSMISSION FILTER KIT GMC P LUBE CARTRIDGE SOCK WHITE : 6.75" (171 mm) ID: 2.47" (63 mm) : 17.75" (451 mm) P LUBE CARTRIDGE FULL FLOW GMC : 3.59" (91 mm) ID: 1.28" (33 mm) : 6.37" (162 mm) P FUEL CARTRIDGE PRIMARY Service Element for Gravity Flow Service Tanks : 3.13" (80 mm) ID: 0.72" (18 mm) : 5.44" (138 mm) P TRANSMISSION FILTER KIT Ford C6AZ-7A098-A P LUBE CARTRIDGE FULL FLOW International R1, R91 : 5.06" (129 mm) ID: 2.94" (75 mm) : 4.81" (122 mm) P TRANSMISSION FILTER KIT Ford F9TZ-7A098-C;Mazda ZZL P LUBE CARTRIDGE SOCK Winslow W1645T : 4.25" (108 mm) ID: 1.25" (32 mm) : 16.38" (416 mm) P FUEL CARTRIDGE PRIMARY Toyota : 2.80" (71 mm) : 4.90" (125 mm) P LUBE CARTRIDGE SOCK Waukesha B : 4.50" (114 mm) ID: 1.45" (37 mm) : 16.00" (406 mm) P LUBE CARTRIDGE FULL FLOW International R91 : 4.53" (115 mm) ID: 1.23" (31 mm) : 9.00" (229 mm) P LUBE CARTRIDGE FULL FLOW Ford D0HZ-3C602-B; International C91 : 2.48" (63 mm) ID: 1.08" (27 mm) : 3.53" (90 mm) P LUBE CARTRIDGE FULL FLOW Honda KF0-315, KF0-000 : 1.97" (50 mm) ID: 0.46" (12 mm) : 1.48" (38 mm) P LUBE CARTRIDGE FULL FLOW BMW : 3.27" (83 mm) ID: 1.49" (38 mm) : 6.36" (161 mm) P LUBE SPIN-ON FULL FLOW Harley-Davidson A : 2.92" (74 mm) Thread Size: 3/4-16 : 3.40" (86 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 24 Micron P TRANSMISSION FILTER KIT GMC Automotive with TH325 Transmission (FWD, 3 Spd.) P FUEL/WATER SEPARATOR SPIN-ON Allis Chalmers , : 3.70" (94 mm) Thread Size: 15/16-16 : 8.42" (214 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P LUBE CARTRIDGE FULL FLOW Massey Ferguson M1 : 3.74" (95 mm) ID: 1.09" (28 mm) : 5.06" (129 mm) Page 214

217 P FUEL IN-LINE Toyota : 2.56" (65 mm) Inlet Size: M14 x 1.5 Overall : 4.17" (106 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL IN-LINE Chrysler , , , : 2.18" (55 mm) Inlet Size: 5/16 Overall : 4.48" (114 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL IN-LINE Nissan L00 : 2.50" (64 mm) Inlet Size: 5/16 Overall : 5.00" (127 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL IN-LINE Chrysler , , : 2.15" (55 mm) Inlet Size: 5/16 Overall : 6.22" (158 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P FUEL IN-LINE Volkswagen A : 3.41" (87 mm) Inlet Size: 5/16 Overall : 6.61" (168 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P LUBE CARTRIDGE FULL FLOW GMC ; Saturn : 1.97" (68 mm) ID: 1.38" (35 mm) : 3.50" (89 mm) P FUEL IN-LINE Audi ; Ferrari ; Volkswagen ; Volvo : 3.46" (88 mm) Inlet Size: M14 x 1.5 Overall : 5.86" (149 mm) Outlet Size: M12 x 1.5 Efficiency 50%: 23 Micron P HYDRAULIC SPIN-ON Hesston : 3.69" (94 mm) Thread Size: 13/16-16 : 5.27" (134 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P GASKET Optional Gasket P P FUEL IN-LINE GMC : 2.28" (58 mm) Inlet Size: 3/8 Overall : 6.37" (162 mm) Outlet Size: 3/8 Efficiency 50%: 23 Micron P TRANSMISSION FILTER KIT Chrysler P FUEL/WATER SEPARATOR SPIN-ON JOHN DEERE AT77587 : 4.24" (108 mm) Thread Size: 1-14 : 6.55" (166 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P LUBE SPIN-ON BYPASS Wisconsin RV40 : 3.33" (85 mm) Thread Size: 2 3/4-5 : 4.84" (123 mm) P HYDRAULIC SPIN-ON Komatsu : 4.28" (109 mm) Thread Size: 1 1/8-16 : 8.09" (206 mm) Gasket : 3.97" (101 mm) Gasket ID: 3.59" (91 mm) P LUBE SPIN-ON FULL FLOW Allis Chalmers ; Massey Ferguson M1 : 3.23" (82 mm) Thread Size: 3/4-16 : 3.19" (81 mm) Gasket : 2.49" (63 mm) Gasket ID: 2.01" (51 mm) P LUBE CARTRIDGE FULL FLOW Case D45378, G33058, A60524, A61234 : 3.78" (96 mm) ID: 1.10" (28 mm) : 6.09" (155 mm) P LUBE CARTRIDGE FULL FLOW Case D45378, G33058, A60524, A61234 : 3.78" (96 mm) ID: 1.10" (28 mm) : 5.96" (151 mm) P Allis Chalmers , : 2.72" (69 mm) ID: 1.06" (27 mm) : 7.78" (198 mm) Page 215

218 P HYDRAULIC SPIN-ON JOHN DEERE AT184206; KOMATSU H1, H2, H4 : 5.00" (127 mm) Thread Size: 1 1/2-16 : 8.22" (209 mm) Gasket : 4.11" (104 mm) Gasket ID: 3.58" (91 mm) P LUBE CARTRIDGE FULL FLOW Ford B8C-6731-A : 5.00" (127 mm) ID: 0.77" (19 mm) : 8.22" (209 mm) Gasket : 4.11" (104 mm) Gasket ID: 3.58" (91 mm) P LUBE SPIN-ON FULL FLOW Quicksilver : 3.66" (93 mm) Thread Size: 13/16-16 : 3.79" (96 mm) Gasket : 3.44" (87 mm) Gasket ID: 3.10" (79 mm) P LUBE SPIN-ON FULL FLOW Oliver , ASA; Waukesha A, K5507 : 3.79" (96 mm) Thread Size: 2 3/4-4 : 8.13" (206 mm) Gasket : 3.05" (77 mm) Gasket ID: 2.68" (68 mm) P LUBE CARTRIDGE JOHN DEERE AH1081R : 3.37" (86 mm) ID: 1.13" (29 mm) : 4.25" (108 mm) P TRANSMISSION FILTER KIT Chrysler P TRANSMISSION FILTER KIT GMC P LUBE CARTRIDGE FULL FLOW Mercedes-Benz , : 3.47" (88 mm) ID: 0.43" (11 mm) : 7.61" (193 mm) P HYDRAULIC SPIN-ON Ford SBA ; New Holland : 3.71" (94 mm) Thread Size: 1 1/8-16 : 5.59" (142 mm) Gasket : 2.73" (69 mm) Gasket ID: 2.42" (61 mm) P FUEL CARTRIDGE PRIMARY Allis Chalmers BM33761; Cummins BM33761; Ford EDL-9176-A; International R91 : 3.98" (101 mm) ID: 0.77" (19 mm) : 4.78" (121 mm) Gasket : 4.74" (120 mm) Gasket ID: 4.34" (110 mm) P LUBE SPIN-ON FULL FLOW Allis Chalmers : 4.28" (109 mm) Thread Size: 1-16 : 7.33" (186 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P FUEL/WATER SEPARATOR SPIN-ON LUBER-FINER LFP2100C : 4.26" (108 mm) Thread Size: 15/16-16 : 8.96" (228 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.46" (62 mm) P HYDRAULIC SPIN-ON MASSEY-FERGUSON TRACTORS : 3.66" (93 mm) Thread Size: M24 x 2 : 5.50" (140 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P TRANSMISSION FILTER KIT FORD LIGHT TRUCKS P LUBE CARTRIDGE FULL FLOW John Deere AT45422 : 4.37" (111 mm) ID: 3.62" (92 mm) : 9.56" (243 mm) P FUEL CARTRIDGE PRIMARY Allis Chalmers ; Caterpillar ; Chrysler J ; Massey Ferguson M91 : 3.33" (84 mm) ID: 0.58" (15 mm) : 2.88" (73 mm) P TRANSMISSION FILTER KIT Ford YC3Z-7A098-BA P TRANSMISSION FILTER KIT CHEVROLET P SERIES Page 216

219 P FUEL IN-LINE DGE CARAVAN : 1.88" (48 mm) Inlet Size: 3/8 Overall : 36.00" (914 mm) : 3.70" (94 mm) Outlet Size: 5/16 Efficiency 50%: 23 Micron P TRANSMISSION FILTER KIT DGE CARAVAN P FUEL IN-LINE JOHN DEERE RE38818 : 1.94" (49 mm) Inlet Size: 9/16-18 Overall : 3.65" (93 mm) Outlet Size: 9/16-18 Efficiency 99%: 150 Micron P HYDRAULIC SPIN-ON NEW HOLLAND , FORD F0NN3N976AA : 3.87" (98 mm) Thread Size: 1 1/8-16 : 8.15" (207 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P LUBE SPIN-ON FULL FLOW DGE 6CYL-225,V8-318, CHYRYS, FORD & OTHERS : 3.66" (93 mm) Thread Size: 3/4-16 : 4.21" (107 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P FUEL SPIN-ON PRIMARY MITSUBISHI ME035393, ME : 3.70" (94 mm) Thread Size: M20 x 1.5 : 4.72" (120 mm) Gasket : 3.43" (87 mm) Gasket ID: 2.52" (64 mm) Efficiency 99%: 30 Micron P LUBE SPIN-ON COMBINATION MITSUBISHI ME : 5.12" (130 mm) Thread Size: M36 x 1.5 : 8.66" (220 mm) Gasket : 4.21" (107 mm) Gasket ID: 3.86" (98 mm) Efficiency 99%: 45 Micron P FUEL CARTRIDGE PRIMARY ISUZU : 2.83" (72 mm) ID: 0.57" (14 mm) : 3.35" (85 mm) Efficiency 50%: 20 Micron P FUEL SPIN-ON PRIMARY ISUZU , HITACHI : 3.71" (94 mm) Thread Size: 3/4-16 : 4.92" (125 mm) Gasket : 2.48" (63 mm) Gasket ID: 1.74" (44 mm) Efficiency 50%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON DETROIT DIESEL : 3.66" (93 mm) Thread Size: 1-14 : 8.40" (213 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY IHC C1 : 4.28" (109 mm) Thread Size: 7/8-14 : 7.98" (203 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 9 Micron P LUBE SPIN-ON FULL FLOW DEUTZ, CLARK, HYSTER : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW FORD, MAZDA : 2.96" (75 mm) Thread Size: M20 x 1.5 : 3.40" (86 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.70" (69 mm) Gasket ID: 2.33" (59 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 36 Micron P HYDRAULIC SPIN-ON CLARK MEL 35C & 45C, MB GCS20-30 : 3.69" (94 mm) Thread Size: 2-16 : 5.56" (141 mm) Relief Valve Setting: 23 PSI (1.59 Bar) Gasket : 2.76" (70 mm) Gasket ID: 2.45" (62 mm) Efficiency Beta 2: 12 Micron P LUBE SPIN-ON COMBINATION CUMMINS ENGINES : 4.65" (118 mm) Thread Size: 2 1/4-12 : 11.70" (297 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 22 Micron Page 217

220 P FUEL SPIN-ON PRIMARY VOLVO : 2.99" (76 mm) Thread Size: M16 x 1.5 : 4.72" (120 mm) Stand Pipe: Yes Y/N Gasket : 2.76" (70 mm) Gasket ID: 2.38" (60 mm) Efficiency 99%: 16 Micron P FUEL SPIN-ON PRIMARY CAT 8N-3080, 3500 SERIES ENGINE : 5.38" (137 mm) Thread Size: 1 3/8-16 : 12.13" (308 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 99%: 9 Micron P LUBE SPIN-ON FULL FLOW MACK 485-GB-3191, RENAULT, VOLVO & ON HWY TRUCKS : 4.24" (108 mm) Thread Size: 1 1/8-16 : 10.32" (262 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 50%: 9 Micron P FUEL SPIN-ON PRIMARY ISUZU : 3.01" (76 mm) Thread Size: 3/4-16 : 3.46" (88 mm) Gasket : 2.50" (64 mm) Gasket ID: 2.16" (55 mm) Efficiency 99%: 22 Micron P FUEL CARTRIDGE SECONDARY GMC : 3.40" (86 mm) ID: 1.10" (28 mm) : 3.27" (83 mm) Efficiency 99%: 20 Micron P FUEL SPIN-ON PRIMARY DEUTZ : 3.07" (78 mm) Thread Size: M14 x 1.5 : 5.03" (128 mm) P GRESEN 3293, A.CHALMERS, CASE : 4.52" (115 mm) ID: 1.80" (46 mm) : 7.05" (179 mm) Efficiency Beta 75: 25 Micron P LUBE SPIN-ON FULL FLOW FORD 785F-6714-AA3A : 3.82" (97 mm) Thread Size: M22 x 1.5 : 5.51" (140 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.45" (62 mm) P LUBE CARTRIDGE FULL FLOW IHC, GALION, HOUGH, TOWMOTOR : 4.06" (103 mm) ID: 1.62" (41 mm) : 5.50" (140 mm) Efficiency 99%: 40 Micron P FUEL/WATER SEPARATOR SPIN-ON FORD E8TZ-9N184-A : 4.39" (112 mm) Thread Size: 1-14 : 4.02" (102 mm) Efficiency 50%: 10 Micron P LUBE SPIN-ON BYPASS CARRIER TRANSICOLD : 3.81" (97 mm) Thread Size: 5/8-18 : 7.91" (201 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 45 Micron P LUBE SPIN-ON FULL FLOW ALLIS CHALMERS, WORTHINGTON, FORD : 3.69" (94 mm) Thread Size: 3/4-16 : 5.54" (141 mm) Relief Valve Setting: PSI ( Bar) Gasket : 3.50" (89 mm) Gasket ID: 2.79" (71 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON COMBINATION CASE IH J : 4.65" (118 mm) Thread Size: 2 1/4-12 : 8.94" (227 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 15 Micron P LUBE SPIN-ON FULL FLOW MICH FP, JOHN DEERE AR43634 : 5.00" (127 mm) Thread Size: 1 1/2-16 : 6.85" (174 mm) Gasket : 5.05" (128 mm) Gasket ID: 4.71" (120 mm) Efficiency 50%: 20 Micron P FUEL SPIN-ON SECONDARY CARRIER, THERMOKING : 3.81" (97 mm) Thread Size: 7/8-14 : 5.22" (133 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) P LUBE SPIN-ON FULL FLOW CARRIER, ATLS COPCO, THERMOKING : 3.66" (93 mm) Thread Size: 1-12 : 6.85" (174 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron Page 218

221 P LUBE SPIN-ON BYPASS THERMO KING : 4.28" (109 mm) Thread Size: 3/4-20 : 7.89" (200 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 99%: 12 Micron P LUBE SPIN-ON FULL FLOW DEUTZ ,, CASE IH : 3.66" (93 mm) Thread Size: 1-12 : 7.87" (200 mm) Relief Valve Setting: 35 PSI (2.41 Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P FUEL SPIN-ON PRIMARY CARRIER, IHC, THERMOKING : 3.66" (93 mm) Thread Size: 1-14 : 6.85" (174 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY IHC, THERMOKING : 3.78" (96 mm) Thread Size: 7/8-14 : 8.70" (221 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.46" (62 mm) Efficiency 99%: 20 Micron P LUBE SPIN-ON FULL FLOW THERMOKING : 4.25" (108 mm) Thread Size: 1-12 : 6.61" (168 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES BENZ : 4.84" (123 mm) ID: 2.25" (57 mm) : 8.86" (225 mm) Efficiency 99%: 36 Micron P LUBE SPIN-ON FULL FLOW CATERPILLAR 1R-0658, 2P-4004 : 4.25" (108 mm) Thread Size: 1 1/8-16 : 10.31" (262 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW CAT 1R-0716, 2P-4005, STGR, SULLAIR : 5.33" (135 mm) Thread Size: 1 1/2-16 : 12.13" (308 mm) Gasket : 4.31" (109 mm) Gasket ID: 3.92" (100 mm) Efficiency 99%: 39 Micron P COOLANT SPIN-ON VOLVO : 3.66" (93 mm) Thread Size: M16 x 1.5 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) P CAT 1W-4056 : 5.07" (129 mm) ID: 2.28" (58 mm) : 10.29" (261 mm) Efficiency Beta 75: 9 Micron P COOLANT SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 11/16-16 : 4.21" (107 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 11/16-16 : 4.21" (107 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 11/16-16 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 11/16-16 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P COOLANT SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 11/16-16 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 25 Micron P LUBE SPIN-ON FULL FLOW 4-5/8" DIA. VERSION OF CATERPILLAR #2P4005 : 4.67" (119 mm) Thread Size: 1 1/2-16 : 11.75" (298 mm) Gasket : 4.32" (110 mm) Gasket ID: 3.85" (98 mm) Efficiency 50%: 20 Micron Page 219

222 P LUBE CARTRIDGE FULL FLOW CAT 1W-4136 : 7.42" (188 mm) ID: 3.43" (87 mm) : 13.38" (340 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW IHC C1 : 5.35" (136 mm) Thread Size: 1 1/2-16 : 9.68" (246 mm) Gasket : 4.29" (109 mm) Gasket ID: 3.89" (99 mm) Efficiency 99%: 40 Micron P FUEL SPIN-ON PRIMARY BULK FUEL W/O DRAIN : 3.66" (93 mm) Thread Size: 1-12 : 6.85" (174 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P LUBE SPIN-ON FULL FLOW PERKINS , MF : 3.66" (93 mm) Thread Size: 3/4-16 : 5.35" (136 mm) Relief Valve Setting: 7-10 PSI ( Bar) Stand Pipe: Yes Y/N Gasket : 2.81" (71 mm) Gasket ID: 2.41" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW PERKINS : 3.66" (93 mm) Thread Size: 3/4-16 : 6.86" (174 mm) Relief Valve Setting: 8-11 PSI ( Bar) Stand Pipe: Yes Y/N Gasket : 2.82" (72 mm) Gasket ID: 2.48" (63 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 48 Micron P LUBE SPIN-ON FULL FLOW PERKINS , MF : 3.00" (76 mm) Thread Size: 3/4-16 : 5.53" (140 mm) Relief Valve Setting: 8-11 PSI ( Bar) Stand Pipe: Yes Y/N Gasket : 2.83" (72 mm) Gasket ID: 2.44" (62 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 48 Micron P COOLANT SPIN-ON MACK 25MF422 : 4.28" (109 mm) Thread Size: 1-16 : 5.78" (147 mm) Gasket : 3.89" (99 mm) Gasket ID: 3.55" (90 mm) P FUEL SPIN-ON PRIMARY MACK 483-GB-470M : 4.25" (108 mm) Thread Size: M22 x 1.5 : 7.95" (202 mm) Gasket : 3.88" (99 mm) Gasket ID: 3.54" (90 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY MACK 483GB471M : 4.25" (108 mm) Thread Size: M30 x 1.5 : 10.30" (262 mm) Gasket : 3.88" (99 mm) Gasket ID: 3.54" (90 mm) Efficiency 99%: 9 Micron P FUEL/WATER SEPARATOR SPIN-ON MACK 483GB472M : 4.25" (108 mm) Thread Size: M22 x 1.5 : 10.40" (264 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY MACK 483GB476M : 4.23" (107 mm) Thread Size: M30 x 1.5 : 7.95" (202 mm) Gasket : 3.90" (99 mm) Gasket ID: 3.54" (90 mm) P FUEL/WATER SEPARATOR SPIN-ON MACK ASET : 4.25" (108 mm) Thread Size: M30 x 1.5 : 8.34" (212 mm) Gasket : 3.98" (101 mm) Gasket ID: 3.58" (91 mm) Efficiency 99%: 5 Micron P FUEL SPIN-ON PRIMARY DEUTZ : 3.82" (97 mm) Thread Size: M16 x 1.5 : 5.47" (139 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 9 Micron P INT'L R91, R91, AND -R92 : 5.00" (127 mm) ID: 2.81" (71 mm) : 6.12" (155 mm) P COOLANT SPIN-ON CUMMINS without chemicals : 3.66" (93 mm) Thread Size: 11/16-16 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron Page 220

223 P LUBE SPIN-ON FULL FLOW JOHN DEERE AM34770 : 2.99" (76 mm) Thread Size: 3/4-16 : 4.72" (120 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P COOLANT SPIN-ON MACK 25-MF-314A : 3.66" (93 mm) Thread Size: 3/4-20 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) P LUBE CARTRIDGE FULL FLOW M.A.N : 4.53" (115 mm) ID: 2.24" (57 mm) : 7.68" (195 mm) P FUEL/WATER SEPARATOR SPIN-ON RACOR B32001, INCLUDES BOWL : 3.81" (97 mm) Thread Size: 1-14 : 9.94" (252 mm) Efficiency 50%: 10 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR B32002, INCLUDES BOWL : 3.81" (97 mm) Thread Size: 1-12 : 9.94" (252 mm) Efficiency 50%: 30 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR B32003, INCLUDES BOWL : 3.81" (97 mm) Thread Size: 1-14 : 8.06" (205 mm) Efficiency 50%: 2 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR B32006, INCLUDES BOWL : 4.38" (111 mm) Thread Size: 1-14 : 11.38" (289 mm) Efficiency 50%: 2 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR S32002 : 3.81" (97 mm) Thread Size: 1-14 : 7.40" (188 mm) Efficiency 99%: 30 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR S3202 : 3.81" (97 mm) Thread Size: 1-12 : 7.40" (188 mm) Efficiency 50%: 30 Micron P FUEL/WATER SEPARATOR SPIN-ON RACOR S3206 : 4.38" (111 mm) Thread Size: 1-14 : 8.56" (217 mm) Efficiency 50%: 2 Micron P LUBE CARTRIDGE FULL FLOW JOHN DEERE AT15088T, PURO R14 : 3.34" (85 mm) ID: 1.62" (41 mm) : 6.50" (165 mm) Efficiency 99%: 38 Micron P FUEL SPIN-ON PRIMARY FORD #E67HZ9365A (BRAZIALIAN CAB FORWARD) : 3.01" (76 mm) Thread Size: M16 x 1.5 : 3.46" (88 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.37" (60 mm) Efficiency 99%: 9 Micron P AC, CLARK, JD, FORD, ALLIS : 4.50" (114 mm) ID: 2.22" (56 mm) : 7.25" (184 mm) Efficiency Beta 75: 25 Micron P LUBE CARTRIDGE FULL FLOW LISTER, PETTER : 2.00" (51 mm) ID: 0.81" (21 mm) : 2.12" (54 mm) P CAT 9J-5461 : 5.07" (129 mm) ID: 3.58" (91 mm) : 11.00" (279 mm) Efficiency Beta 2: 20 Micron P LUBE SPIN-ON FULL FLOW THERMOKING , J.DEERE, YANMAR : 3.12" (79 mm) Thread Size: M20 x 1.5 : 3.87" (98 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.45" (62 mm) Gasket ID: 2.15" (55 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 50 Micron Page 221

224 P LUBE SPIN-ON FULL FLOW CAT 8N-9586, 9N-5570 : 3.81" (97 mm) Thread Size: 1 1/8-16 : 5.22" (133 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 45 Micron P JOHN DEERE AR75603, AR75601 : 4.61" (118 mm) ID: 2.20" (56 mm) : 5.29" (134 mm) Efficiency Beta 2: 20 Micron P LUBE SPIN-ON FULL FLOW IHC C91, CASE : 3.66" (93 mm) Thread Size: 1-12 : 6.85" (174 mm) Stand Pipe: Yes Y/N Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P FUEL SPIN-ON PRIMARY IHC C1 : 3.66" (93 mm) Thread Size: 1-14 : 7.87" (200 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 9 Micron P LUBE SPIN-ON FULL FLOW CAT 9N-5680 : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron P FUEL SPIN-ON PRIMARY CAT 4N-5823 : 4.31" (109 mm) Thread Size: 1-14 : 10.60" (269 mm) Gasket : 2.82" (72 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 9 Micron P CAT 8B-5935 : 3.66" (93 mm) ID: 1.60" (36 mm) : 5.94" (151 mm) P IHC, EATON, RACINE : 4.50" (114 mm) ID: 0.53" (13 mm) : 9.06" (230 mm) Efficiency Beta 75: 47 Micron P IHC, TOWMOTOR, CHRYSLER, FORD, REXNORD : 4.50" (114 mm) ID: 0.53" (13 mm) : 5.00" (127 mm) Efficiency Beta 75: 40 Micron P HYDRAULIC SPIN-ON CESSNA A,VCKRS ,573082,573083, : 3.69" (94 mm) Thread Size: 1 1/8-16 : 5.37" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency Beta 2: 10 Micron P LUBE SPIN-ON FULL FLOW CAT 9N-6007 : 4.28" (109 mm) Thread Size: 1 1/8-16 : 5.78" (147 mm) Gasket : 3.94" (100 mm) Gasket ID: 3.55" (90 mm) Efficiency 99%: 40 Micron P CAT 4J-6064, 4J-0806 : 5.08" (129 mm) ID: 3.35" (85 mm) : 9.02" (229 mm) Efficiency Beta 75: 35 Micron P IHC C1 : 6.50" (165 mm) ID: 5.50" (140 mm) : 12.16" (309 mm) P FUEL CARTRIDGE PRIMARY CASE, JOHN DEERE, IHC, MF, ROOSAMASTER : 3.41" (87 mm) ID: 0.74" (19 mm) : 2.80" (71 mm) Efficiency 99%: 14 Micron P FUEL BOX PRIMARY THERMOKING Width: 2.83" (72 mm) : 2.46" (62 mm) Height: 4.62" (117 mm) Efficiency 99%: 10 Micron P FUEL/WATER SEPARATOR BOX THERMOKING Width: 2.83" (72 mm) : 2.46" (62 mm) Height: 4.62" (117 mm) Page 222

225 P FUEL CARTRIDGE PRIMARY C.A.V. 7111/792 : 3.46" (88 mm) ID: 1.53" (39 mm) : 4.45" (113 mm) P CAT 7J-0670, KOMATSU : 6.84" (174 mm) ID: 3.94" (100 mm) : 9.00" (229 mm) Efficiency Beta 75: 35 Micron P FUEL BOX PRIMARY JOHN DEERE AR86745, STANADYNE Width: 3.71" (94 mm) : 3.28" (83 mm) Height: 5.04" (128 mm) Efficiency 99%: 22 Micron P TRANSMISSION FILTER KIT FORD TRUCK P TRANSMISSION FILTER KIT CHEV, GMC TRUCK P TRANSMISSION FILTER KIT CHEV, FORD, DGE, GMC TRUCK/BUS, MERCEDES P FUEL SPIN-ON PRIMARY DET. DIESEL , AC T915D : 3.81" (97 mm) Thread Size: 1-12 : 7.97" (202 mm) Gasket : 3.38" (86 mm) Gasket ID: 3.04" (77 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON SECONDARY DET. DIESEL , AC TP916D : 3.66" (93 mm) Thread Size: 13/16-12 : 6.85" (174 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.05" (77 mm) Efficiency 99%: 9 Micron P FUEL SPIN-ON SECONDARY DETROIT DIESEL : 3.66" (93 mm) Thread Size: 13/16-12 : 6.85" (174 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.05" (77 mm) Efficiency 99%: 3 Micron P TRANSMISSION FILTER KIT JEEP, DGE, IVECO P TRANSMISSION FILTER KIT CHEV, GMC LIGHT TRUCK P LUBE SPIN-ON FULL FLOW IHC C2 : 3.66" (93 mm) Thread Size: 1-12 : 6.85" (174 mm) Relief Valve Setting: 7-10 PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron P HYDRAULIC SPIN-ON TORO : 4.78" (121 mm) Thread Size: 1 1/2-16 : 10.93" (278 mm) P FUEL/WATER SEPARATOR BOX THERMOKING Width: 2.83" (72 mm) : 2.46" (62 mm) Height: 4.62" (117 mm) Efficiency 99%: 30 Micron P TRANSMISSION FILTER KIT CHEV, DGE, FORD TRUCK/BUS P GALION B67373, B67373A : 5.00" (127 mm) ID: 2.50" (64 mm) : 11.87" (301 mm) P FUEL CARTRIDGE PRIMARY CAV FUEL SYSTEM APPLICATIONS : 3.50" (89 mm) ID: 0.75" (19 mm) : 2.80" (71 mm) P KOMATSU : 5.12" (130 mm) ID: 3.40" (86 mm) : 11.50" (292 mm) Efficiency Beta 75: 30 Micron Page 223

226 P LUBE SPIN-ON COMBINATION THERMO KING , : 3.66" (93 mm) Thread Size: M26 x 1.5 : 6.92" (176 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 25 Micron P FUEL SPIN-ON PRIMARY CAT 1R-0711, 1P-2299, 6L-7440, KTSU : 3.66" (93 mm) Thread Size: 1-14 : 6.85" (174 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 9 Micron P LUBE CARTRIDGE FULL FLOW CAT 7N-7500 : 7.42" (188 mm) ID: 2.63" (67 mm) : 10.00" (254 mm) Efficiency 50%: 20 Micron P LUBE SPIN-ON FULL FLOW ISUZU, NISSAN : 3.66" (93 mm) Thread Size: 3/4-16 : 5.35" (136 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P HOUGH, IHC, MICHIGAN : 6.00" (152 mm) ID: 2.62" (67 mm) : 17.94" (456 mm) Efficiency Beta 75: 17 Micron P CASE, CAT, FORD, IHC C91, GARRISON : 2.52" (64 mm) ID: 1.06" (27 mm) : 3.70" (94 mm) Efficiency Beta 75: 30 Micron P FUEL/WATER SEPARATOR SPIN-ON CUMMINS : 3.66" (93 mm) Thread Size: 1-14 : 7.40" (188 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 20 Micron P FUEL/WATER SEPARATOR SPIN-ON DETROIT DIESEL : 3.81" (97 mm) Thread Size: 1-12 : 7.36" (187 mm) Gasket : 3.55" (90 mm) Gasket ID: 3.18" (81 mm) Efficiency 99%: 20 Micron P FUEL/WATER SEPARATOR SPIN-ON MACK ENGINES : 4.28" (109 mm) Thread Size: 13/16-18 : 8.84" (225 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.45" (62 mm) Efficiency 99%: 20 Micron P LUBE SPIN-ON FULL FLOW IHC R91, : 3.81" (97 mm) Thread Size: 1-12 : 6.78" (172 mm) Relief Valve Setting: PSI ( Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 99%: 40 Micron P LUBE SPIN-ON FULL FLOW JOHN DEERE AR98329 : 5.06" (129 mm) Thread Size: 1 1/2-12 : 6.72" (171 mm) Efficiency 50%: 25 Micron P LUBE CARTRIDGE FULL FLOW MERCEDES : 4.70" (119 mm) ID: 2.16" (55 mm) : 7.60" (193 mm) P LUBE CARTRIDGE FULL FLOW IHC R91, CUMMINS : 4.47" (114 mm) ID: 1.75" (44 mm) : 9.06" (230 mm) P VICKERS ,270562,922788, IHC, NEW HOL : 2.87" (73 mm) ID: 0.47" (12 mm) : 4.37" (111 mm) Efficiency Beta 2: 10 Micron P FUEL CARTRIDGE PRIMARY KOMATSU : 5.00" (127 mm) ID: 0.97" (25 mm) : 9.75" (248 mm) P LUBE SPIN-ON FULL FLOW CUMMINS , : 3.66" (93 mm) Thread Size: 1-16 : 6.85" (174 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron Page 224

227 P LUBE SPIN-ON FULL FLOW CUMMINS , : 3.66" (93 mm) Thread Size: 1-16 : 5.35" (136 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 50%: 20 Micron P FUEL SPIN-ON PRIMARY CASE IH A58712 : 3.66" (93 mm) Thread Size: 13/16-18 : 5.67" (144 mm) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 40 Micron P LUBE SPIN-ON BYPASS Case A36136, Hyster 38714, MF M91 : 3.54" (90 mm) Thread Size: 2 3/4-4 : 4.86" (123 mm) P FUEL CARTRIDGE PRIMARY CAT 4H-8792, 9H-4729, 6H-5932 : 3.37" (86 mm) ID: 1.12" (28 mm) : 6.50" (165 mm) Efficiency 99%: 10 Micron P CAT 5J8877 : 5.12" (130 mm) ID: 3.37" (86 mm) : 6.00" (152 mm) P LUBE SPIN-ON COMBINATION FLEETGUARD LF9000, LF9001 CUMMINS SIGNATURE 600 : 4.66" (118 mm) Thread Size: M95 x 2.5 : 11.70" (297 mm) Gasket : 4.68" (119 mm) Gasket ID: 4.00" (102 mm) Efficiency 99%: 22 Micron P FUEL SPIN-ON PRIMARY CAT 9L-9100, 9L-8794 : 3.66" (93 mm) Thread Size: 15/16-16 : 5.55" (141 mm) Gasket : 2.75" (70 mm) Gasket ID: 2.42" (61 mm) Efficiency 99%: 23 Micron P LUBE SPIN-ON FULL FLOW DEUTZ : 3.74" (95 mm) Thread Size: 1-12 : 5.47" (139 mm) Relief Valve Setting: 36 PSI (2.48 Bar) Gasket : 2.81" (71 mm) Gasket ID: 2.42" (61 mm) Anti Drain Valve: Yes Y/N Efficiency 50%: 20 Micron P FIAT ALLIS , A.CHALMERS : 4.39" (112 mm) ID: 1.75" (44 mm) : 12.75" (324 mm) P FUEL SPIN-ON PRIMARY DAF : 3.82" (97 mm) Thread Size: M16 x 1.5 : 8.27" (210 mm) Gasket : 2.80" (71 mm) Gasket ID: 2.44" (62 mm) Efficiency 50%: 5 Micron P FUEL/WATER SEPARATOR SPIN-ON VOLVO , RACOR R260P P CAT 9M-9740 : 4.00" (102 mm) ID: 2.27" (58 mm) : 9.25" (235 mm) Efficiency Beta 2: 20 Micron P FUEL BOX PRIMARY CAT 8N-9850, STANADYNE Width: 3.71" (94 mm) : 3.34" (85 mm) Height: 4.95" (126 mm) Efficiency 99%: 22 Micron P FUEL CARTRIDGE PRIMARY CATERPILLAR 8N9850, 1R0718 : 3.93" (100 mm) ID: 1.62" (41 mm) : 9.25" (235 mm) Efficiency 99%: 22 Micron P HYDAC 0280D010BNHC : 2.75" (70 mm) ID: 1.35" (34 mm) : 13.98" (355 mm) Efficiency Beta 75: 10 Micron P SCHROEDER KSX7V, KSX7, KZX10 : 3.19" (81 mm) ID: 1.63" (41 mm) : 9.19" (233 mm) P SCHROEDER KSX3V, KSX3, KZX3 : 3.19" (81 mm) ID: 1.63" (41 mm) : 9.19" (233 mm) P SCHROEDER BBS7, BBZ10 : 4.96" (126 mm) ID: 3.31" (84 mm) : 18.31" (465 mm) Efficiency Beta 75: 10 Micron Page 225

228 P SCHROEDER 18LS7, 18LZ10 : 3.90" (99 mm) ID: 2.26" (57 mm) : 18.50" (470 mm) Efficiency Beta 75: 10 Micron P BLOUNT PRENTICE # : 3.90" (99 mm) ID: 1.61" (41 mm) : 18.31" (465 mm) Efficiency Beta 75: 10 Micron P PALL HC6300FDN16H, HC6300FKN16H : 3.07" (78 mm) ID: 1.63" (41 mm) : 18.81" (478 mm) Efficiency Beta 75: 6 Micron P HAK05 FILTER ASSY'S : 4.39" (112 mm) ID: 2.45" (62 mm) : 5.00" (127 mm) P HAK05 FILTER ASSY'S : 4.39" (112 mm) ID: 2.44" (62 mm) : 5.00" (127 mm) Efficiency Beta 75: 40 Micron P HAK05 ASSY'S : 4.39" (112 mm) ID: 2.45" (62 mm) : 8.00" (203 mm) Efficiency Beta 75: 40 Micron P PALL HC6300FKN13H, HC6300FDN13H : 3.07" (78 mm) ID: 1.63" (41 mm) : 12.87" (327 mm) Efficiency Beta 75: 6 Micron P HAK05 ASSY'S : 4.39" (112 mm) ID: 2.45" (62 mm) : 13.00" (330 mm) Efficiency Beta 75: 40 Micron P PALL HC6500FKS16H, HC6500FDS16H : 3.80" (97 mm) ID: 2.20" (56 mm) : 16.80" (427 mm) Efficiency Beta 75: 10 Micron P PALL HC6500FDN26H, HC6500FKN26H : 3.80" (97 mm) ID: 2.20" (56 mm) : 25.71" (653 mm) Efficiency Beta 75: 6 Micron P HYDAC 2600R005BNHC : 5.65" (144 mm) ID: 3.80" (97 mm) : 36.26" (921 mm) Relief Valve Setting: 44 PSI (3.03 Bar) ID Width: 3.76" (96 mm) Efficiency Beta 75: 6 Micron P HYDRAULIC SPIN-ON GARDNER DENVER : 4.76" (121 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Efficiency Beta 2: 10 Micron P HAK05 FILTER ASSY'S : 4.39" (112 mm) ID: 2.45" (62 mm) : 5.00" (127 mm) Efficiency Beta 75: 22 Micron P HYDRAULIC SPIN-ON, DURAMAX HMK04/HMK24 ASSY'S, WATER REMOVAL ELEMENT : 3.82" (97 mm) Thread Size: 1 3/8-12 : 9.44" (240 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) P HYDRAULIC SPIN-ON CASE IH C5 : 4.86" (123 mm) Thread Size: 1 1/2-16 : 7.85" (199 mm) Efficiency Beta 2: 4 Micron P HYDRAULIC SPIN-ON LPS04 Series, 10 micron abs Synteq., 5.35'' long : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P HYDRAULIC SPIN-ON LPS04 SERIES, 22 micron abs. Synteq, 5.35'' long : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (62 mm) P HYDAC 2600R003BNHC : 5.65" (144 mm) ID: 3.80" (97 mm) : 36.26" (921 mm) Efficiency Beta 75: 3 Micron Page 226

229 P HYDAC 2600R010BNHC : 5.65" (144 mm) ID: 3.80" (97 mm) : 36.26" (921 mm) Efficiency Beta 75: 10 Micron P FAIREY ARLON 170L105A, 170Z105A, 170Z122A : 2.18" (55 mm) ID: 0.77" (20 mm) : 2.62" (67 mm) Efficiency Beta 75: 12 Micron P FAIREY ARLON 170L123A, 170Z123A, 170Z110A : 2.18" (55 mm) ID: 0.77" (20 mm) : 2.62" (67 mm) P FAIREY ARLON 170L205A, 170Z205A, 170Z222A : 2.18" (55 mm) ID: 0.77" (20 mm) : 4.82" (123 mm) P FAIREY ARLON 170L210A, 170Z210A, 170Z223A : 2.18" (55 mm) ID: 0.77" (20 mm) : 4.82" (123 mm) Efficiency Beta 75: 26 Micron P PTI PG050-GU-B : 3.29" (84 mm) ID: 1.87" (48 mm) : 5.59" (142 mm) Efficiency Beta 75: 3 Micron P PTI PG050-HU-B : 3.29" (84 mm) ID: 1.87" (47 mm) : 5.59" (142 mm) Efficiency Beta 75: 6 Micron P PTI PG050-JUB : 3.29" (84 mm) ID: 1.87" (48 mm) : 5.59" (142 mm) Efficiency Beta 75: 25 Micron P PTI PG080-GU-B : 3.29" (84 mm) ID: 1.87" (47 mm) : 10.04" (255 mm) Efficiency Beta 75: 3 Micron P PTI # PG080-HU-B : 3.29" (84 mm) ID: 1.87" (47 mm) : 10.04" (255 mm) Efficiency Beta 75: 6 Micron P PTI PG080-JUB : 3.29" (84 mm) ID: 1.87" (48 mm) : 10.04" (255 mm) Efficiency Beta 75: 25 Micron P PTI PG120-GU-B : 3.29" (84 mm) ID: 1.87" (47 mm) : 14.69" (373 mm) Efficiency Beta 75: 3 Micron P PTI PG120-HU-B : 3.29" (84 mm) ID: 1.87" (48 mm) : 14.69" (373 mm) Efficiency Beta 75: 6 Micron P PTI PG120-JUB : 3.29" (84 mm) ID: 1.87" (48 mm) : 14.69" (373 mm) Efficiency Beta 75: 25 Micron P MP FILTRI, CU250-A10N : 3.90" (99 mm) ID: 2.03" (52 mm) : 8.27" (210 mm) Efficiency Beta 75: 25 Micron P MP FILTRI, CU630-A25N : 5.12" (130 mm) ID: 2.99" (76 mm) : 9.84" (250 mm) Efficiency Beta 75: 25 Micron P HYDRAULIC SPIN-ON HBK04 ELEMENT, 5'' LG., 22 MICRON ABS. SYNTEQ : 3.82" (97 mm) Thread Size: 1 1/4-12 : 5.97" (152 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.48" (63 mm) P HEK11 FUEL/WATER SEPARATOR ELEMENT : 7.44" (189 mm) ID: 4.86" (123 mm) : 22.00" (559 mm) Efficiency Beta 75: 20 Micron Page 227

230 P TRANSMISSION FILTER KIT ALLISON Width: 3.21" (82 mm) Height: 1.51" (38 mm) ID: 1.57" (40 mm) Depth: 5.98" (152 mm) Efficiency 99%: 35 Micron P TRANSMISSION FILTER KIT ALLISON Width: 3.21" (82 mm) Height: 1.51" (38 mm) ID: 1.57" (40 mm) Depth: 4.21" (107 mm) Efficiency 99%: 35 Micron P HYDRAULIC SPIN-ON, DURAMAX HMK05/25 ELEMENT, HEAVY DUTY, 11.6'' LONG, # 3 SYNTHETIC MEDIA : 4.77" (121 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) Gasket : 3.39" (86 mm) Gasket ID: 3.11" (79 mm) P HYDRAULIC SPIN-ON HBK05 WATER ABSORBING SPIN-ON FILTER : 5.04" (128 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) P Manifold HMK05 XTENSION KIT P HYDRAULIC SPIN-ON SPE : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON SPE : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON SPE-50-3-N : 4.86" (123 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P HYDRAULIC SPIN-ON SPE P HYDRAULIC SPIN-ON SPE : 4.86" (123 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P HYDRAULIC SPIN-ON SPE W : 4.86" (123 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P HYDRAULIC SPIN-ON SPE : 4.76" (121 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) P HYDRAULIC SPIN-ON SPE : 4.76" (121 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) P HYDRAULIC SPIN-ON SPE-50-BTA-10 : 4.86" (123 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P HYDRAULIC SPIN-ON SPE-60-BTA-10 : 4.86" (123 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P HYDRAULIC SPIN-ON SPE-50-BTA-3 P HYDRAULIC STRAINER SEC : 5.12" (130 mm) ID: 4.00" (102 mm) Thread Size: 3-8 NPT : 11.80" (300 mm) Efficiency 50%: 238 Micron P HYDRAULIC STRAINER SEC RV3 : 5.12" (130 mm) ID: 4.00" (102 mm) Thread Size: 3-8 NPT : 11.80" (300 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 238 Micron P HYDRAULIC STRAINER SEC : 8.10" (206 mm) Thread Size: 3-8 NPT : 11.30" (287 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEC : 8.10" (206 mm) ID: 5.00" (127 mm) Thread Size: 4-8 NPT : 15.00" (381 mm) Efficiency 50%: 149 Micron Page 228

231 P HYDRAULIC STRAINER SEH-3-3/8-100 : 1.90" (48 mm) Thread Size: 3/8-18 : 2.50" (64 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER SEH /2-60 : 4.00" (102 mm) Thread Size: 1 1/2-11 1/2 : 10.00" (254 mm) Efficiency 50%: 238 Micron P HYDRAULIC STRAINER PEC : 5.20" (132 mm) Thread Size: 3-8 : 10.90" (277 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC RV3 : 5.20" (132 mm) Thread Size: 3-8 : 10.90" (277 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC SST : 5.20" (132 mm) Thread Size: 3-8 : 10.90" (277 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC : 2.70" (68 mm) ID: 1.60" (41 mm) Thread Size: /2 NPT : 5.60" (142 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC RV3 : 2.70" (68 mm) ID: 1.60" (41 mm) Thread Size: /2 NPT : 5.60" (142 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /4-100 : 3.40" (86 mm) ID: 2.00" (51 mm) Thread Size: 1 1/4-11 1/2 NPT : 5.60" (142 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /4-100-RV3 : 3.40" (86 mm) ID: 2.00" (51 mm) Thread Size: 1 1/4-11 1/2 NPT : 5.60" (142 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /4-200 : 3.40" (86 mm) ID: 2.00" (51 mm) Thread Size: 1 1/4-11 1/2 NPT : 5.60" (142 mm) Efficiency 50%: 74 Micron P HYDRAULIC STRAINER PEC /2-100 : 3.40" (86 mm) ID: 2.30" (58 mm) Thread Size: 1 1/2-11 1/2 NPT : 5.60" (142 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /2-100-RV3 : 3.40" (86 mm) ID: 2.30" (58 mm) Thread Size: 1 1/2-11 1/2 NPT : 5.60" (142 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC-3-3/8-100 : 1.90" (48 mm) ID: 1.00" (25 mm) Thread Size: 1 3/8-18 NPT : 4.20" (107 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /2-100 : 4.00" (102 mm) ID: 2.80" (71 mm) Thread Size: 1 1/2-11 1/2 NPT : 8.00" (203 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /2-100-RV3 : 4.00" (102 mm) ID: 2.80" (71 mm) Thread Size: 1 1/2-11 1/2 NPT : 8.00" (203 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC : 4.00" (102 mm) ID: 2.80" (71 mm) Thread Size: /2 NPT : 10.40" (264 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC RV3 : 4.00" (102 mm) ID: 2.80" (71 mm) Thread Size: /2 NPT : 10.40" (264 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC-5-1/2-100 : 1.90" (48 mm) ID: 1.00" (25 mm) Thread Size: 1/2-14 NPT : 4.30" (109 mm) Efficiency 50%: 149 Micron Page 229

232 P HYDRAULIC STRAINER PEC /2-100 : 5.20" (132 mm) ID: 3.30" (84 mm) Thread Size: 2 1/2-8 NPT : 8.50" (216 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC /2-100-RV3 : 5.20" (132 mm) ID: 3.30" (84 mm) Thread Size: 2 1/2-8 NPT : 8.50" (216 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC : 2.70" (68 mm) ID: 1.60" (41 mm) Thread Size: /2 NPT : 4.30" (109 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC-8-3/4-100 : 2.70" (68 mm) ID: 1.40" (36 mm) Thread Size: 3/4-14 NPT : 4.30" (109 mm) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER PEC-8-3/4-100-RV3 : 2.70" (68 mm) ID: 1.40" (36 mm) Thread Size: 3/4-14 NPT : 4.30" (109 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM : 1.36" (35 mm) Thread Size: 1 5/8-12 UN Outer : 8.17" (208 mm) Thread Size: 1 1/16-12 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM RV5 : 1.36" (35 mm) Thread Size: 1 5/8-12 UN Outer : 8.17" (208 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 1/16-12 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM : 1.66" (35 mm) Thread Size: 1 7/8-12 UN Outer : 8.20" (208 mm) Thread Size: 1 5/16-12 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM RV5 : 1.66" (35 mm) Thread Size: 1 7/8-12 UN Outer : 8.20" (208 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 5/16-12 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM : 2.12" (54 mm) Thread Size: 2 1/2-12 UN Outer : 9.04" (230 mm) Thread Size: 1 5/8-12 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM RV5 : 2.12" (54 mm) Thread Size: 2 1/2-12 UN Outer : 9.04" (230 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 5/8-12 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM : 1.17" (30 mm) Thread Size: 1 5/16-12 UN Outer : 5.34" (136 mm) Thread Size: 3/4-16 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER STM RV5 : 1.17" (30 mm) Thread Size: 1 5/8-12 UN Outer : 5.34" (136 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 3/4-16 UN Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 4.00" (102 mm) Thread Size: 4 NPT Outer : 11.30" (287 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 3 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM : 1.36" (35 mm) Thread Size: 1 1/4 NPT Outer : 8.17" (208 mm) Thread Size: 3/4 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 1.36" (35 mm) Thread Size: 1 1/4 NPT Outer : 8.17" (208 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 3/4 NPT Inner Efficiency 50%: 149 Micron Page 230

233 P HYDRAULIC STRAINER TM RV5 : 1.36" (35 mm) Thread Size: 1 1/4 NPT Outer : 8.17" (208 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 3/4 NPT Inner Efficiency 50%: 238 Micron P HYDRAULIC STRAINER TM : 1.66" (42 mm) Thread Size: 1 1/2 NPT Outer : 8.20" (208 mm) Thread Size: 1 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 1.66" (42 mm) Thread Size: 1 1/2 NPT Outer : 8.20" (208 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 1.66" (42 mm) Thread Size: 1 1/2 NPT Outer : 8.20" (208 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 NPT Inner Efficiency 50%: 74 Micron P HYDRAULIC STRAINER TM : 2.12" (54 mm) Thread Size: 2 NPT Outer : 9.04" (230 mm) Thread Size: 1 1/4 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 2.12" (54 mm) Thread Size: 2 NPT Outer : 9.04" (230 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 1/4 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 2.12" (54 mm) Thread Size: 2 NPT Outer : 9.04" (230 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1 1/4 NPT Inner Efficiency 50%: 74 Micron P HYDRAULIC STRAINER TM : 0.87" (22 mm) Thread Size: 3/4 NPT Outer : 4.00" (102 mm) Thread Size: 1/2 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM : 3.00" (76 mm) Thread Size: 3 NPT Outer : 9.70" (246 mm) Thread Size: 2 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV3 : 3.00" (76 mm) Thread Size: 3 NPT Outer : 9.70" (246 mm) Relief Valve Setting: 3 PSI (0.21 Bar) Thread Size: 2 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 3.00" (76 mm) Thread Size: 3 NPT Outer : 9.70" (246 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 2 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM : 1.17" (30 mm) Thread Size: 1 NPT Outer : 5.34" (136 mm) Thread Size: 1/2 NPT Inner Efficiency 50%: 149 Micron P HYDRAULIC STRAINER TM RV5 : 1.17" (30 mm) Thread Size: 1 NPT Outer : 5.34" (136 mm) Relief Valve Setting: 5 PSI (0.34 Bar) Thread Size: 1/2 NPT Inner Efficiency 50%: 149 Micron P SEAL KIT HBV-SK-04 P SEAL KIT HBV-SK-06 P SEAL KIT HBV-SK-16 P SEAL KIT HBV-SK-20 P SEAL KIT HBV-SK-24 P ABO-10 P ABO-40 P BPS-10-N12 P BPS-10-N12-A Page 231

234 P BPS-40-N12 P BPS-40-N12-A P CPS-40-N12 P CPS-40-N12-A P BLANK P LPS-40-N04 P RPS-10-5-N12 P RPS-40-2-N12 P RPS-40-5-N12 P DPO-40-A P DPS-40-N04 P DPS-40-N04-A P DPS-40-N06 P DPS-40-N06-A P DPS-40-N08-A P P DPS-40-N12 P DPS-40-N12-A P P P MBS-10-N04 P MBS-10-N06 P MBS-40-N04 P MICRON MINI P MBS-40-N06 P MBS-Z-10-N04 P MBS-Z-10-N06 P ABS-03-N12 P ABS-10-B12 P ABS-10-N08 P ABS-10-N12 P ABS-10-N16 P ABS-40-N08 P ABS-40-N12 P ABS-40-N16 P ABS-W-03-N12 P ABS-W-10-N08 P ABS-W-10-N12 P ABS-W-10-N16 P ABS-W-40-N12 P ABS-W-40-N16 P ABS-Z-10-N16 Page 232

235 P ABS-Z-40-N08 P ABS-Z-40-N12 P BPB-10-A CAP ONLY P BPB-10-N-A P BPB-40-3S P BPB-40-3S-A P BPB-40-6S-D P BPB-40-A CAP ONLY P BPB-40-N P BPB-40-N-A P BPB-40-N-SMB P BPT-40-N P NVT-00-N P RPB-10-5-N P RPB-10-5-N-D-TAD P RPB S P RPB S P RPB-40-5-N P RPT S P RPT-40-5-CAP ONLY P RPT-40-5-N P MBB-10-N P MBB-40-N P NVB-00-3S P NVB-00-N P NVB-W-00-8S P GBB-10-8S P GBB-10-N P ABB-03-N P ABB-10 P ABB-10-3S P ABB-10-3S-LT P ABB-10-3S-R P ABB-10-3S-SMB P ABB-10-6S P ABB-10-6S-LT P ABB-10-6S-R P ABB-10-8S P ABB-10-8S-D-IG P ABB-10-N P ABB-10-N-LT P ABB-10-N-PC Page 233

236 P ABB-10-N-R P ABB-40 P ABB-40-3S P ABB-40-3S-LT P ABB-40-3S-R P ABB-40-3S-SMB P ABB-40-6S P ABB-40-6S-D P ABB-40-6S-LT P ABB-40-8S P ABB-40-8S-D P ABB-40-8S-LT P ABB-40-CWOF P ABB-40-LT P ABB-40-N P ABB-40-N-LT P ABB-40-N-R P ABB-40-N-SMB P ABB-W-03-8S-IG P ABB-W-10-3S P ABB-W-10-3S-LT P ABB-W-10-N P ABB-W-10-N-R P ABB-W-40-3S P ABB-W-40-6S P ABB-W-40-N P ABB-Z-40-3S P ABB-Z-40-3S-LT P ABB-Z-40-N P ABB-Z-40-N-R P SEAL KIT HBV-SK-08 P SEAL KIT HBV-SK-12 P STRAINER SEH-5-1/2-100-RV3 P STRAINER TM P GASKET RA P GASKET RA P P PBB S P PBB S P PBB-10-5-N P PBB-10-5-N-LT P PBB N Page 234

237 P PBB-40-5 P PBB S P PBB S P PBB S P PBB-40-5-N P PBB-W-10-5-N P PBB-W-10-5-N-LT P PBB-W S P PBB-Z N P PBB-Z-10-5-N P PBS N12 P PBS N16 P PBS-10-5-B12 P PBS-10-5-N12 P PBS-10-5-N16 P PBS N12 P PBS-40-5-N12 P PBS-40-5-N16 P PBS-W-10-5-N12 P PBS-W N12 P PBS-W-40-5-N12 P GASKET RA P GASKET RA P GASKET FA80400 P SM-B P FASTENER KIT SP11350-EF785/0 P HYDRAULIC SPIN-ON SPE BLANK : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON : 3.66" (92 mm) Thread Size: 1-12 UNF Efficiency 99%: >40 Micron : 5.35" (135 mm) P HYDRAULIC SPIN-ON SPE BLANK : 5.04" (128 mm) Thread Size: 1 1/2-16 : 6.66" (169 mm) P HYDRAULIC SPIN-ON SPE BLANK : 4.78" (121 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P BPB-40 CAP ONLY P BPT-40-CAP ONLY P SIGHT GAUGE HFTX-26 P PBB-W N P PBS-40-5-B12 P P SFP-30-3/8+F BLACK Page 235

238 P SFP-30-3/8+F ORANGE P ABS-W-40-B12 P HYDRAULIC SPIN-ON MPE : 3.43" (87 mm) Thread Size: 1 1/2-16 : 8.00" (203 mm) P HYDRAULIC SPIN-ON MPE-40-BTA-10 : 3.43" (87 mm) Thread Size: 1 1/2-16 : 8.00" (203 mm) P HYDRAULIC SPIN-ON MPE-40-BTA-3 : 3.43" (87 mm) Thread Size: 1 1/2-16 : 8.03" (204 mm) Gasket : 3.46" (88 mm) Gasket ID: 2.95" (75 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC SPIN-ON CASE A1 : 4.78" (121 mm) Thread Size: 1 1/2-16 : 10.66" (271 mm) Gasket : 5.04" (128 mm) Gasket ID: 4.76" (121 mm) P HYDRAULIC SPIN-ON JOHN DEERE RE : 3.71" (94 mm) Thread Size: 1 1/4-12 : 9.67" (246 mm) Gasket : 2.84" (72 mm) Gasket ID: 2.47" (63 mm) P564101, LHA RPB-10-5 P FUEL/WATER SEPARATOR CARTRIDGE SERVICE FILTER FOR DONALDSON K031005, K FUEL MANAGER : 4.37" (111 mm) ID: 3.75" (95 mm) : 9.25" (235 mm) Efficiency 50%: 5 Micron P HYDRAULIC SPIN-ON DONALDSON LPS04 SPIN-ON : 3.66" (93 mm) Thread Size: 1-12 : 7.87" (200 mm) P FUEL/WATER SEPARATOR CARTRIDGE SERVICE FILTER FOR DONALDSON K FUEL MANAGER : 4.37" (111 mm) ID: 3.75" (95 mm) : 9.25" (235 mm) Efficiency 50%: 2 Micron P FUEL/WATER SEPARATOR CARTRIDGE SERVICE FILTER FOR DONALDSON K FUEL MANAGER : 4.37" (111 mm) ID: 3.75" (95 mm) : 5.25" (133 mm) Efficiency 50%: 2 Micron P564424, SPIN ON SCHROEDER ABF3/10 : 3.66" (93 mm) Thread Size: 1 1/8-16 : 3.66" (93 mm) Efficiency 50%: 10 Micron P564425, SPIN ON GBS N12 : 3.66" (93 mm) Thread Size: 3/4 NPT : 3.65" (93 mm) Efficiency 50%: 10 Micron P FUEL/WATER SEPARATOR CARTRIDGE SERVICE FILTER FOR DONAL DSON K FUEL MANAGER : 4.37" (111 mm) ID: 3.75" (95 mm) Efficiency Beta 2: 30 Micron : 9.25" (235 mm) Efficiency 50%: 30 Micron P HYDRAULIC SPIN-ON, DURAMAX DONALDSON HMK05/25 # 1/2 MEDIA : 4.60" (117 mm) Thread Size: 1 3/4-12 : 14.24" (362 mm) P Pall HC9604FKN16H -- TRIBOGUARD HYDRAULIC ELEMENT : 3.12" (79 mm) ID: 2.01" (51 mm) : 16.56" (421 mm) P KOMATSU AK3572, PALL HC8604FKS16H, Pall HC9604FKS16H : 3.12" (79 mm) ID: 2.01" (51 mm) : 16.56" (421 mm) P Pall HC8914FKS16H : 3.88" (99 mm) ID: 2.53" (64 mm) : 16.03" (407 mm) P Pall HC9100FKS13H -- TRIBOGUARD HYDRAULIC ELEMENT P BULK FLUID STORAGE TANKS : 4.50" (114 mm) Thread Size: 1 NPT : 4.52" (115 mm) Page 236

239 P PALL HC9404FKS12H : 3.88" (99 mm) ID: 2.53" (64 mm) : 12.31" (313 mm) P JCB : 2.36" (60 mm) ID: 1.35" (34 mm) : 8.46" (215 mm) Relief Valve Setting: 43.5 PSI (3.00 Bar) P GENIE : 2.20" (56 mm) ID: 1.00" (25 mm) : 6.69" (170 mm) P HYDRAULIC SPIN-ON SPE-15-BTA-3 : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON DONALDSON LPS04 SERIES HYDRAULIC FILTER ASSEMBLIES : 3.66" (93 mm) Thread Size: 1-12 : 7.87" (200 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON DONALDSON LPS04 SERIES HYDRAULIC FILTER ASSEMBLIES : 3.66" (93 mm) Thread Size: 1-12 : 7.87" (200 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON DONALDSON LPS04 SERIES HYDRAULIC FILTER ASSEMBLIES P HYDRAULIC SPIN-ON DONALDSON LPS04 SERIES HYDRAULIC FILTER ASSEMBLIES : 3.66" (93 mm) Thread Size: 1-12 : 5.35" (136 mm) P FAIREY ARLON CXW4115V P HYDRAULIC SPIN-ON Sullair : 3.66" (93 mm) Thread Size: 31/32-20 : 5.35" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P FILTREC R472G06 : 3.80" (97 mm) ID: 2.20" (56 mm) : 16.81" (427 mm) Efficiency Beta 75: 6 Micron P HYDRAULIC SPIN-ON LHA TTE : 3.66" (93 mm) Thread Size: 3/4-BSP : 5.36" (136 mm) P HYDRAULIC SPIN-ON UCC MX , PTI F4E-35-CCB : 3.66" (93 mm) Thread Size: 3/4-BSP : 5.36" (136 mm) Gasket : 2.83" (72 mm) Gasket ID: 2.46" (63 mm) P HYDRAULIC SPIN-ON : 4.66" (118 mm) Thread Size: 1 1/4-11 BSP : 8.94" (228 mm) P HYDRAULIC SPIN-ON UCC MX : 4.66" (118 mm) Thread Size: 1 1/4-11 BSP : 6.22" (158 mm) P Pall HC8300FKP39H or Z : 4.14" (105 mm) ID: 4.14" (105 mm) : 38.62" (981 mm) P Pall HC8300FKN29H or Z : 4.14" (105 mm) ID: 4.14" (105 mm) : 38.62" (981 mm) P Pall HC8300FKS39H or Z : 5.97" (152 mm) ID: 4.14" (105 mm) : 38.62" (981 mm) P Pall HC8300FKT39H or Z : 4.14" (105 mm) ID: 4.14" (105 mm) : 38.62" (981 mm) P SCHROEDER 39QM60V : 5.97" (152 mm) ID: 4.14" (106 mm) : 38.62" (981 mm) Page 237

240 P SCHROEDER 39QM150V : 5.97" (152 mm) ID: 4.14" (105 mm) : 38.62" (981 mm) P TRAP /BAYONET P TRAP METAL 3/4"NPT P TRAP METAL BAYONET P TRAP METAL 3/4" BSP P HYDRAULIC SPIN-ON LPS04 P HYDRAULIC SPIN-ON LPS04 P HYDRAULIC SPIN-ON LPS04 P HYDRAULIC SPIN-ON LPS05/HBK05 P HYDRAULIC SPIN-ON LPS05/HBK05 P HYDRAULIC SPIN-ON LPS05/HBK05 P HYDRAULIC SPIN-ON LPS05/HBK05 P HYDRAULIC SPIN-ON HMK04 : 3.71" (94 mm) Thread Size: 1-3/8 : 5.97" (152 mm) P HYDRAULIC SPIN-ON HMK04 P HYDRAULIC SPIN-ON HMK05 P HYDRAULIC SPIN-ON HBK04 P COALESCING FILTER MACK 279GB43M : 3.02" (77 mm) Thread Size: M16 x 1.5-6H : 2.63" (67 mm) Gasket : 2.76" (70 mm) Gasket ID: 2.38" (60 mm) P TRAP METAL 1" NPT P TRAP METAL BAYONET ADAPTER P TRAP-MINI, PLASTIC, 9/16-18 UNF P Parker Q P HYDRAULIC SPIN-ON : 2.99" (76 mm) Thread Size: 3/4-16 : 3.39" (86 mm) P HYDRAULIC SPIN-ON : 3.82" (97 mm) Thread Size: 1 5/16-12 : 5.97" (152 mm) P AN : 6.00" (152 mm) ID: 2.60" (66 mm) : 1.88" (48 mm) Efficiency Beta 75: 9 Micron P AN : 6.00" (152 mm) ID: 2.60" (66 mm) : 8.00" (203 mm) Efficiency Beta 75: 9 Micron P TRAP - MINI, PLASTIC, 3/8 NPT P TRAP-MINI, PLASTIC, 1/4 NPT P AN : 6.02" (152 mm) ID: 3.50" (88 mm) Efficiency 99%: 14 Micron : 3.94" (100 mm) P HYDAC/GE BRAKE FILTER 1.5 MW : 1.37" (35 mm) ID: 0.49" (12 mm) Efficiency 99%: 14 Micron : 1.65" (41 mm) P HYDRAULIC SPIN-ON CAT APPLICATIONS : 4.59" (117 mm) Thread Size: 1 3/4-12 : 11.63" (295 mm) P : 6.00" (152 mm) ID: 2.60" (66 MM MM) Efficiency Beta 75: 8 Micron : 33.63" (854 mm) Page 238

241 p : 6.00" (152 mm) P ID: 2.60" (66 mm) p Efficiency Beta 75: <4 Micron : 33.63" (854 mm) P : 6.29" (159 mm) ID: 3.76" (96 mm) : 15.69" (398 mm) P HYDRAULIC/LUBE SPIN-ON LPS04 : 3.66" (93 mm) Thread Size: 1-12 UNF : 7.87" (200 mm) P ASSY, 9/16-18UNF P ASSY, 3/8 NPT P ASSY, 1/4 NPT P HYDRAULIC SPIN-ON : 4.70" (119 mm) Thread Size: 1 3/4-12 UN-28 Efficiency 99%: 13 Micron Efficiency 99%: 13 Micron : 11.63" (295 mm) P ZINGA, ZRE : 3.83" (97 mm) ID: 1.89" (48 mm) ID: 1.89" (48 mm) Efficiency Beta 75: <4 Micron : 9.19" (233 mm) P ZINGA, ZRE : 3.83" (97 mm) ID: 1.89" (48 mm) Efficiency Beta 75: 9 Micron : 9.19" (233 mm) P ZINGA, ZRE : 3.83" (97 mm) ID: 1.89" (48 mm) Efficiency Beta 75: 9 Micron : 18.19" (462 mm) P ZINGA, ZRE : 3.83" (97 mm) ID: 1.89" (48 mm) Efficiency Beta 75: <4 Micron : 18.19" (462 mm) P NORDBERG : 6.08" (154 mm) ID: 1.75" (44 mm) Efficiency 99%: 14 Micron : 31.00" (787 mm) P600043, RADIALSEAL DONALDSON FRG05 AIR CLEANER : 4.16" (106 mm) ID: 2.36" (60 mm) : 14.31" (363 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG05 AIR CLEANER : 2.44" (62 mm) ID: 1.77" (45 mm) : 13.50" (343 mm) P600501, RADIALSEAL AC A1621C 2001 CHEVROLET EXPRESS VAN : 5.44" (138 mm) ID: 3.20" (81 mm) : 12.87" (327 mm) P600676, RADIALSEAL MACK 57MD46M, 57MD48M, 81SF28 : 9.33" (237 mm) ID: 5.80" (147 mm) : 25.04" (636 mm) P AIR SAFETY, OVAL DONALDSON PSD08 SERIES POWERCORE Width: 4.24" (108 mm) Height: 1.86" (47 mm) : 8.24" (209 mm) P601280, RADIALSEAL DONALDSON FRG09 AIR CLEANER : 6.89" (175 mm) ID: 4.00" (102 mm) : 16.00" (406 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG09 AIR CLEANER : 4.14" (105 mm) ID: 3.33" (85 mm) : 15.41" (391 mm) P601437, RADIALSEAL DONALDSON FRG08 AIR CLEANER : 6.12" (155 mm) ID: 3.08" (78 mm) : 15.04" (382 mm) Page 239

242 P AIR SAFETY, RADIALSEAL DONALDSON FRG08 AIR CLEANER : 3.32" (84 mm) ID: 2.55" (65 mm) : 14.60" (371 mm) P AIR SAFETY, OVAL DONALDSON PSD10 SERIES POWERCORE Width: 7.46" (189 mm) Height: 1.57" (40 mm) : 12.46" (316 mm) P601767, RADIALSEAL Donadlson FRG12 Air Cleaner : 9.22" (234 mm) ID: 4.61" (117 mm) : 13.03" (331 mm) P603568, CYLINDRICAL DONALDSON SPIRACLE ELEMENT : 6.24" (158 mm) ID: 3.26" (83 mm) : 12.30" (312 mm) P603577, POWERCORE FORD LIGHT TRUCK 6.0L DIESEL Height: 10.66" (271 mm) Width: 7.95" (202 mm) : 13.15" (334 mm) P AIR SAFETY DONALDSON FKB04 SERIES : 2.62" (67 mm) : 10.24" (260 mm) P AIR SAFETY, RADIALSEAL Donadlson FRG12 Air Cleaner : 4.76" (121 mm) ID: 3.17" (81 mm) : 12.71" (323 mm) P601790, RADIALSEAL DONALDSON FRG10 AIR CLEANER : 8.18" (208 mm) ID: 4.17" (106 mm) : 16.12" (409 mm) P602344, KONEPAC ENDURANCE EON VERSION OF P : 12.74" (324 mm) ID: 8.32" (211 mm) : 23.99" (609 mm) P AIR SAFETY DONALDSON FKB05 SERIES : 3.07" (78 mm) ID: 2.04" (52 mm) : 12.64" (321 mm) P AIR PANEL, ENGINE AC A1618C SILVERADO & SERRIA PICKUPS Width: 12.29" (312 mm) Depth: 2.39" (61 mm) Height: 9.73" (247 mm) P AIR PANEL, ENGINE FORD LIGHT TRUCK, MOTORCRAFT FA1710, FA1750 Width: 13.35" (339 mm) Depth: 3.30" (84 mm) Height: 7.23" (184 mm) P GASKET DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS P603746, CYLINDRICAL DONALDSON SPIRACLE ELEMENT : 5.09" (129 mm) ID: 2.13" (54 mm) : 8.08" (205 mm) P603755, RADIALSEAL JOHN DEERE RE SERIES TRACTOR : 13.09" (332 mm) ID: 6.78" (172 mm) : 11.10" (282 mm) P AIR SAFETY, RADIALSEAL JOHN DEERE RE SERIES TRACTOR : 6.89" (175 mm) ID: 5.24" (133 mm) : 10.62" (270 mm) P CATERPILLAR : 19.29" (490 mm) ID: 12.93" (328 mm) : 17.84" (453 mm) Gasket ID: 16.85" (428 mm) P AIR OIL SEPARATOR INGERSOLL RAND , ES : 8.37" (213 mm) ID: 5.25" (133 mm) : 14.25" (362 mm) Flange Diameter: 13.25" (337 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 8.38" (213 mm) ID: 5.45" (138 mm) : 9.94" (252 mm) Flange Diameter: 11.38" (289 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 14.88" (378 mm) ID: 12.12" (308 mm) : 22.92" (582 mm) Flange Diameter: 18.00" (457 mm) Page 240

243 P AIR OIL SEPARATOR INGERSOLL RAND : 6.88" (175 mm) ID: 4.12" (105 mm) : 10.52" (267 mm) Flange Diameter: 7.65" (194 mm) P AIR OIL SEPARATOR INGERSOLL RAND : 6.88" (175 mm) ID: 3.81" (97 mm) : 10.94" (278 mm) Flange Diameter: 6.88" (175 mm) P AIR OIL SEPARATOR INGERSOLL RAND , ES : 6.88" (175 mm) ID: 3.81" (97 mm) : 10.50" (267 mm) Flange Diameter: 9.37" (238 mm) P AIR OIL SEPARATOR INGERSOLL RAND , : 10.38" (264 mm) ID: 7.66" (195 mm) : 20.18" (513 mm) Flange Diameter: 14.25" (362 mm) P604273, POWERCORE H2 HUMMER Height: 6.00" (152 mm) Width: 7.20" (183 mm) : 11.10" (282 mm) P G : 8.66" (220 mm) ID: 5.21" (132 mm) : 28.00" (711 mm) Gasket ID: 7.29" (185 mm) P604457, KONEPAC DONALDSON FKB04 SERIES : 4.09" (104 mm) ID: 3.41" (87 mm) : 10.48" (266 mm) P AIR SAFETY VOLVO VN SERIES : 8.44" (214 mm) : 18.56" (471 mm) P605960, POWERCORE FREIGHTLINER M2 SERIES HIGH HP FLAME RETARDANT : 14.84" (377 mm) : 8.03" (204 mm) P606059, CYLINDRICAL MIDLAND E : 4.00" (102 mm) ID: 1.33" (34 mm) : 1.39" (35 mm) P AIR PANEL ISUZU Width: 9.81" (249 mm) Depth: 6.66" (169 mm) Height: 1.99" (51 mm) P AIR PANEL TOYOTA Width: 8.16" (207 mm) Depth: 9.65" (245 mm) Height: 2.03" (52 mm) P AIR PANEL MOPAR Width: 9.61" (244 mm) Depth: 11.36" (288 mm) Height: 1.46" (37 mm) P AIR PANEL, VENTILATION KOMATSU Width: 10.03" (255 mm) Depth: 12.32" (313 mm) Height: 1.84" (47 mm) P604996, RADIALSEAL KOMATSU 3EC02A541E : 6.47" (164 mm) ID: 3.58" (91 mm) : 13.66" (347 mm) P606067, FINNED Case D73225; John Deere AR44774 : 6.38" (162 mm) ID: 5.25" (133 mm) : 13.25" (337 mm) P AIR SAFETY, RADIALSEAL Komatsu 3EC02A5240, , Toyota U : 3.72" (95 mm) ID: 2.92" (74 mm) : 13.37" (340 mm) P605022, RADIALSEAL ISUZU : 13.08" (332 mm) ID: 6.78" (172 mm) : 16.69" (424 mm) P DURAQUIP DUST COLLECTOR ELEMENT : 9.25" (216 mm) ID: 6.34" (443 mm) : 24.50" (622 mm) Page 241

244 P606069, OVAL GENERAL MOTORS Width: 8.19" (208 mm) : 9.72" (247 mm) Depth: 1.98" (50 mm) P606070, OVAL FORD D2AZ9601A Width: 9.03" (229 mm) Height: 2.62" (66 mm) : 11.25" (286 mm) P606071, OVAL ALLIS CHALMERS Width: 4.11" (104 mm) Height: 3.05" (77 mm) : 6.64" (169 mm) P LISTER PETTER ACF4996 : 1.97" (50 mm) ID: 3.63" (92 mm) : 2.84" (72 mm) P606073, OVAL GMC ; Isuzu Width: 8.19" (208 mm) Height: 2.83" (72 mm) : 9.72" (247 mm) P FORD F67Z9601AA : 6.87" (174 mm) ID: 3.26" (83 mm) : 5.91" (150 mm) P606079, OVAL INGERSOLL RAND Width: 4.35" (110 mm) : 4.71" (120 mm) P AIR SAFETY MASSEY FERGUSON M1 : 2.94" (75 mm) ID: 2.47" (63 mm) : 8.06" (205 mm) P AIR PANEL, VENTILATION CATERPILLAR 6P1319 Width: 4.70" (119 mm) Depth: 10.70" (272 mm) Height: 4.20" (107 mm) P AIR PANEL, VENTILATION CATERPILLAR 7T3519 Width: 3.94" (100 mm) Depth: 19.69" (500 mm) Height: 3.95" (100 mm) P PETTER DIESEL ZPF356, VOLVO : 5.43" (138 mm) ID: 3.13" (80 mm) : 2.52" (64 mm) P606075, OVAL GENERAL MOTORS Width: 5.75" (146 mm) Height: 3.98" (101 mm) : 5.75" (146 mm) P AIR PANEL, VENTILATION CATERPILLAR 7T1889 Width: 6.00" (152 mm) Depth: 23.50" (597 mm) Height: 2.50" (64 mm) P AIR PANEL, VENTILATION JOHN DEERE AH92463 Width: 5.00" (127 mm) Depth: 16.50" (419 mm) Height: 1.19" (30 mm) P GENERAL MOTORS : 5.13" (130 mm) ID: 3.41" (87 mm) : 5.28" (134 mm) P AIR PANEL, VENTILATION FORD F3TZ9601Z Width: 8.35" (212 mm) Depth: 10.55" (268 mm) Height: 1.65" (42 mm) P AIR PANEL, VENTILATION CATERPILLAR Width: 5.56" (141 mm) Depth: 16.41" (417 mm) Height: 2.59" (66 mm) P AIR PANEL, VENTILATION CATERPILLAR 7T7358 Width: 12.00" (305 mm) Depth: 12.88" (327 mm) Height: 2.19" (56 mm) P AIR PANEL, VENTILATION CATERPILLAR 9P5174, 2G1946 Width: 11.94" (303 mm) Depth: 13.25" (337 mm) Height: 0.81" (21 mm) Page 242

245 P AIR PANEL, VENTILATION CATERPILLAR 9X4986 Width: 4.06" (103 mm) Depth: 14.90" (378 mm) Height: 2.88" (73 mm) P606119, POWERCORE JOHN DEERE AL Height: 7.22" (183 mm) Width: 5.12" (130 mm) : 12.87" (327 mm) P606120, POWERCORE JOHN DEERE AL Height: 11.15" (283 mm) Width: 5.12" (130 mm) : 12.87" (327 mm) P AIR PANEL, ENGINE BRIGGS & STRATTON Width: 5.20" (132 mm) Depth:.86" (22 mm) Height: 4.45" (113 mm) P606277, SPIN ON MACK 2MD3131 : 3.69" (94 mm) Thread Size: 3/4-20 : 4.34" (110 mm) P JOHN DEERE AM3100 : 4.93" (125 mm) ID: 3.00" (76 mm) : 5.00" (127 mm) P AIR SAFETY, OVAL DONALDSON PSD09 SERIES POWERCORE, JOHN DEERE AL Width: 4.24" (108 mm) Height: 0.74" (19 mm) : 11.73" (298 mm) P CASE K922630, Lister : 8.25" (210 mm) ID: 5.90" (150 mm) : 3.95" (100 mm) P606122, POWERCORE FORD 2U2J9601BA, MOTORCRAFT FA1757 Height: 8.43" (214 mm) Width: 6.20" (157 mm) : 14.38" (365 mm) P AIR PANEL GM Width: 6.06" (154 mm) Depth: 7.63" (194 mm) Height: 1.62" (41 mm) P CUMMINS , ; KOHLER : 8.00" (203 mm) ID: 5.38" (137 mm) : 10.90" (277 mm) P AIR PANEL GMC Width: 7.13" (181 mm) Depth: 9.37" (238 mm) Height: 1.70" (43 mm) P606220, RADIALSEAL CATERPILLAR : 13.47" (342 mm) ID: 8.20" (208 mm) : 15.02" (382 mm) P AIR PANEL DAIHATSU ; TOYOTA , Width: 8.88" (226 mm) Depth: 8.88" (226 mm) Height: 1.54" (39 mm) P AIR PANEL FORD F5RZ-9601-C Width: 5.83" (148 mm) Depth: 15.53" (395 mm) Height: 1.62" (41 mm) P AIR PANEL MOTORCRAFT FA1630 Width: 7.11" (181 mm) Depth: 10.02" (255 mm) Height: 1.58" (40 mm) P AIR PANEL FORD E43Z9601C Width: 6.98" (177 mm) Depth: 7.89" (200 mm) Height: 1.59" (40 mm) P AIR PANEL FORD YF1Z-9601AA Width: 7.10" (180 mm) Depth: 10.02" (255 mm) Height: 2.33" (59 mm) Page 243

246 P INGERSOLL RAND : 10.93" (278 mm) ID: 6.50" (165 mm) : 5.03" (128 mm) P606289, SPECIAL FORD D8AZ-9D695-A Height: 1.30" (33 mm) : 2.00" (51 mm) Depth: 5.20" (132 mm) P BRIGGS & STRATTON : 4.25" (108 mm) ID: 2.00" (51 mm) : 3.81" (97 mm) P AIR SAFETY INTERNATIONAL R91 : 12.09" (307 mm) ID: 7.73" (196 mm) : 10.38" (264 mm) P INTERNATIONAL R91 : 7.94" (202 mm) ID: 3.57" (91 mm) : 16.38" (416 mm) P AIR SAFETY INTERNATIONAL R91 : 5.24" (133 mm) ID: 4.08" (104 mm) : 13.25" (337 mm) P606295, OVAL GMC Width: 10.75" (273 mm) Height: 8.61" (219 mm) : 2.55" (65 mm) P606299, SPECIAL KOHLER : 6.07" (154 mm) : 4.68" (119 mm) Depth: 4.08" (104 mm) P IH C91 : 12.09" (307 mm) ID: 7.72" (196 mm) : 17.75" (451 mm) P MASSEY FERGUSON M1 : 5.88" (149 mm) ID: 3.00" (76 mm) : 9.25" (235 mm) P AIR ROUND, VENTILATION JOHN DEERE T : 6.44" (163 mm) ID: 3.63" (92 mm) : 11.50" (292 mm) P EUCLID : 4.25" (108 mm) ID: 1.56" (40 mm) : 4.81" (122 mm) P606502, OVAL CHRYSLER , Width: 8.00" (203 mm) Height: 5.78" (147 mm) : 3.54" (90 mm) P INTERNATIONAL C1 : 10.22" (260 mm) ID: 7.97" (202 mm) : 16.00" (406 mm) P AIR REFINER ARM10131S : 10.00" (254 mm) ID: 5.00" (127 mm) : 12.88" (327 mm) P AIR SAFETY JOHN DEERE AT49021 : 6.12" (155 mm) ID: 4.74" (120 mm) : 18.28" (464 mm) P AIR PANEL, VENTILATION VOLVO Width: 12.25" (311 mm) Depth: 1.13" (29 mm) Height: 9.18" (233 mm) P Freightliner M2 Series Emergency Vehicles, Flame Retardant : 9.33" (237 mm) ID: 5.15" (131 mm) : 12.28" (312 mm) P AIR SAFETY Freightliner M2 Series Emergency Vehicles, Flame Retardant : 5.30" (135 mm) ID: 4.35" (110 mm) : 11.82" (300 mm) Page 244

247 P VOLVO VN SERIES : 12.98" (330 mm) ID: 9.13" (232 mm) : 18.91" (480 mm) P Freightliner M2 Series Emergency Vehicles, Flame Retardant : 13.09" (332 mm) ID: 6.78" (172 mm) : 14.76" (375 mm) P606761, SPECIAL Bendix ; Cummins ; GMC : 2.50" (64 mm) Height: 1.38" (35 mm) : 1.75" (44 mm) P AIR PANEL, VENTILATION CATERPILLAR Width: 11.73" (298 mm) Depth: 2.19" (56 mm) Height: 16.84" (428 mm) P606803, RADIALSEAL JOHN DEERE R : 6.47" (164 mm) ID: 3.58" (91 mm) : 12.15" (309 mm) P606947, OVAL CHRYSLER MD Width: 4.69" (119 mm) Height: 8.38" (213 mm) : 6.63" (169 mm) P606948, FINNED NISSAN H10B : 5.25" (133 mm) ID: 2.84" (72 mm) : 9.50" (241 mm) P Caterpillar , GMC : 2.94" (75 mm) ID: 2.00" (51 mm) : 3.94" (100 mm) P ATLAS COPCO : 5.16" (131 mm) ID: 3.34" (85 mm) : 1.94" (49 mm) P VOLVO : 5.98" (152 mm) ID: 3.46" (88 mm) : 8.72" (221 mm) P606804, RADIALSEAL CATERPILLAR : 6.47" (164 mm) ID: 3.58" (91 mm) : 12.17" (309 mm) P KUBOTA T : 4.09" (104 mm) ID: 2.50" (64 mm) : 9.94" (252 mm) P606944, CYLINDRICAL CATERPRILLAR EQUIPMENT : 3.03" (77 mm) ID: 1.47" (37 mm) : 2.28" (58 mm) P FARR : 11.03" (280 mm) ID: 6.00" (152 mm) : 19.59" (498 mm) P606945, SPECIAL FORD D1AZ-6D695-A : 3.75" (95 mm) Depth: 1.63" (41 mm) Height: 0.63" (16 mm) P AIR PANEL, ENGINE BRIGGS & STRATTON Width: 7.00" (178 mm) Depth: 3.50" (89 mm) Height: 1.50" (38 mm) P NEW HOLLAND , : 8.50" (216 mm) ID: 4.84" (123 mm) : 15.56" (395 mm) P AIR PANEL GMC Width: 11.50" (292 mm) Depth: 7.03" (179 mm) Height: 1.66" (42 mm) Page 245

248 P Saab-Scania ; Volkswagen , A : 7.06" (179 mm) ID: 3.88" (99 mm) : 4.06" (103 mm) P AIR PANEL, VENTILATION VOLVO Width: 4.70" (119 mm) Depth: 11.50" (292 mm) Height: 1.74" (44 mm) P NELSON A : 9.22" (234 mm) ID: 5.84" (148 mm) : 14.75" (375 mm) P Case D46062 : 7.55" (192 mm) ID: 4.69" (119 mm) : 12.59" (320 mm) P AIR SAFETY Sullair : 9.91" (252 mm) ID: 8.06" (205 mm) : 23.50" (597 mm) P607225, OVAL Chrysler Width: 6.56" (167 mm) : 11.47" (291 mm) Depth: 3.62" (92 mm) P AIR FILTER KIT Clark EG1; EMD ; GE 41A218313P1 P FRANKLIN : 9.00" (229 mm) ID: 5.69" (145 mm) : 13.56" (344 mm) P AIR PANEL, ENGINE Motorcraft FA1675 Width: 7.03" (179 mm) Depth: 13.88" (353 mm) Height: 2.38" (60 mm) P AIR SECONDARY FRANKLIN : 5.56" (141 mm) ID: 4.50" (114 mm) : 12.50" (318 mm) P AIR PANEL, VENTILATION Ford F6DZ-19N619-BA, F6DZ-19N619-C, F7DZ-19N619-A Width: 10.39" (264 mm) Depth: 1.14" (29 mm) Height: 6.69" (170 mm) P Allis Chalmers ; Ford C9NN-9601-A : 6.05" (154 mm) ID: 3.64" (92 mm) : 14.44" (367 mm) P AMC ; Ford 3CAZ-9601-A; International C91; Jeep J : 9.72" (247 mm) ID: 8.19" (208 mm) : 2.26" (57 mm) P Ford D3ZZ-9601-A : 11.25" (286 mm) ID: 9.03" (229 mm) : 1.97" (50 mm) P Massey Ferguson M92 : 4.09" (104 mm) ID: 2.48" (63 mm) : 9.38" (238 mm) P Ford E4TE-9601-AA : 11.75" (298 mm) ID: 9.56" (243 mm) : 2.12" (54 mm) P Cushman ; GMC ; Outboard Marine Corporation : 5.50" (140 mm) ID: 3.82" (97 mm) : 3.11" (79 mm) P GMC : 11.50" (292 mm) ID: 8.63" (219 mm) : 3.03" (77 mm) Page 246

249 P GMC : 13.88" (353 mm) ID: 11.63" (295 mm) : 3.04" (77 mm) P GMC : 12.00" (305 mm) ID: 9.83" (250 mm) : 2.49" (63 mm) P GMC : 9.97" (253 mm) ID: 8.63" (219 mm) : 2.31" (59 mm) P Ford D0GY-9601-A : 13.00" (330 mm) ID: 11.20" (284 mm) : 2.51" (64 mm) P Lister-Petter : 5.91" (150 mm) ID: 3.50" (89 mm) : 2.87" (73 mm) P Ford D7FZ-9601-A : 11.24" (285 mm) ID: 9.40" (239 mm) : 1.79" (45 mm) P AIR PANEL, VENTILATION Volkswagen Width: 13.18" (335 mm) Depth: 5.25" (133 mm) Height: 1.65" (42 mm) P INTERNATIONAL R1 : 6.94" (176 mm) ID: 4.22" (107 mm) : 15.37" (390 mm) P AIR SECONDARY INTERNATIONAL R91 : 4.12" (105 mm) ID: 3.00" (76 mm) : 14.56" (370 mm) P CASE K963803; HOUGH 87924C1; WAYNE : 7.13" (181 mm) ID: 4.94" (125 mm) : 4.44" (113 mm) P AIR PANEL, ENGINE Audi ; BMW , , Width: 10.00" (254 mm) Depth: 8.37" (213 mm) Height: 2.27" (58 mm) P TOYOTA : 8.70" (221 mm) ID: 7.76" (197 mm) : 2.80" (71 mm) P CHRYSLER AA : 5.66" (144 mm) ID: 2.52" (64 mm) : 6.59" (167 mm) P AIR PANEL, VENTILATION CHRYSLER AA Width: 7.63" (194 mm) Depth: 8.50" (216 mm) Height: 1.65" (42 mm) P HONDA ZE3-010, ZE3-505 : 4.41" (112 mm) ID: 1.63" (41 mm) : 3.62" (92 mm) P KOHLER : 6.96" (177 mm) ID: 5.60" (142 mm) : 3.00" (76 mm) P AIR PANEL, VENTILATION Toyota Width: 9.04" (230 mm) Depth: 12.21" (310 mm) Height: 2.05" (52 mm) P AIR PANEL, VENTILATION Toyota Width: 9.31" (236 mm) Depth: 12.24" (311 mm) Height: 2.05" (52 mm) Page 247

250 P AIR PANEL, VENTILATION Ford 1L2Z-9601-AA Width: 11.50" (292 mm) Depth: 7.13" (181 mm) Height: 2.33" (59 mm) P AIR SECONDARY Allis Chalmers ; Case A45695; Ford SFD : 5.96" (151 mm) ID: 4.83" (123 mm) : 16.38" (416 mm) P International C91 : 13.85" (352 mm) ID: 7.45" (189 mm) : 7.50" (191 mm) P AIR SECONDARY Ford D2NN-9R500-B; Versatile : 4.53" (115 mm) ID: 3.50" (89 mm) : 13.53" (344 mm) P AIR PANEL, VENTILATION New Holland V30986; Versatile Width: 4.00" (102 mm) Depth: 44.00" (1118 mm) Height: 2.07" (53 mm) P JOHN DEERE AR51431 : 7.40" (188 mm) ID: 5.83" (148 mm) : 18.62" (473 mm) P AIR SECONDARY Versatile : 7.40" (188 mm) ID: 5.90" (150 mm) : 18.62" (473 mm) P607273, OVAL HONDA 17210ZE2505, 17210ZE2822 Width: 3.50" (89 mm) Height: 3.07" (78 mm) : 3.07" (78 mm) P Versatile : 14.00" (356 mm) ID: 7.72" (196 mm) : 20.63" (524 mm) P607264, FINNED John Deere AT43867; Oliver : 9.94" (252 mm) ID: 5.29" (134 mm) : 12.50" (318 mm) P AIR SAFETY Massey Ferguson M91 : 3.35" (85 mm) ID: 2.29" (58 mm) : 13.44" (341 mm) P Sullair : 9.22" (234 mm) ID: 5.32" (135 mm) : 12.00" (305 mm) P Ford D2NN-9601-A; Versatile : 9.81" (249 mm) ID: 4.61" (117 mm) : 14.41" (366 mm) P CASE A44694 : 12.08" (307 mm) ID: 7.73" (196 mm) : 7.50" (191 mm) P AIR SAFETY CASE A44695 : 6.84" (174 mm) ID: 4.22" (107 mm) : 5.12" (130 mm) P607276, CYLINDRICAL CUMMINS : 5.00" (127 mm) ID: 2.62" (67 mm) : 1.25" (32 mm) P AIR PANEL, VENTILATION CHRYSLER AA Width: 9.40" (239 mm) Depth: 13.78" (350 mm) Height: 2.05" (52 mm) P MASSEY FERFUSON M91 : 6.84" (174 mm) ID: 4.22" (107 mm) : 14.28" (363 mm) P FORD B4HF9601DA : 12.06" (306 mm) ID: 4.91" (125 mm) : 9.32" (237 mm) Page 248

251 P AIR PANEL, VENTILATION WHITE Width: 20.12" (511 mm) Depth: 23.00" (584 mm) Height: 4.31" (109 mm) P AIR PANEL, VENTILATION GMC Width: 14.00" (356 mm) Depth: 22.50" (572 mm) Height: 6.19" (157 mm) P MASSEY FERGUSON M91 : 9.06" (230 mm) ID: 5.29" (134 mm) : 13.50" (343 mm) P Ingersoll-Rand ; Joy ; Sullair : 9.75" (248 mm) ID: 6.13" (156 mm) : 5.24" (133 mm) P AIR SECONDARY International C91 : 4.09" (104 mm) ID: 2.48" (63 mm) : 13.38" (340 mm) P BMW : 3.89" (99 mm) ID: 2.36" (60 mm) : 2.76" (70 mm) P AIR SECONDARY MASSEY FERGUSON M91 : 5.20" (132 mm) ID: 4.08" (104 mm) : 12.25" (311 mm) P607298, SPECIAL GM Width: 3.95" (100 mm) : 1.88" (48 mm) P International C91 : 9.22" (234 mm) ID: 4.89" (124 mm) : 18.38" (467 mm) P AIR PANEL, VENTILATION Isuzu , ; Toyota W010 Width: 12.22" (310 mm) Depth: 7.88" (200 mm) Height: 2.05" (52 mm) P Massey Ferguson M91 : 6.09" (155 mm) ID: 3.51" (89 mm) : 15.28" (388 mm) P Atlas Copco : 11.94" (303 mm) ID: 7.50" (191 mm) : 4.25" (108 mm) P AIR PANEL, VENTILATION Toyota Width: 12.30" (312 mm) Depth: 7.35" (187 mm) Height: 1.64" (42 mm) P Nissan G00; GMC : 12.87" (327 mm) ID: 0.48" (12 mm) : 2.30" (58 mm) P Yamaha J : 4.15" (105 mm) ID: 1.39" (35 mm) : 5.84" (148 mm) P AIR PANEL, VENTILATION Mazda KL47-13-Z40; Mitsubishi MB Width: 9.16" (233 mm) Depth: 7.35" (187 mm) Height: 2.04" (52 mm) P Nissan ; Subaru ; TCM 16546L3200 : 9.17" (233 mm) ID: 6.80" (173 mm) : 1.94" (49 mm) P AIR PANEL, VENTILATION GMC Width: 7.64" (194 mm) Depth: 12.77" (324 mm) Height: 1.65" (42 mm) Page 249

252 P Nissan W00 : 9.79" (249 mm) ID: 8.19" (208 mm) : 2.83" (72 mm) P AIR PANEL, VENTILATION Mitsubishi MD Width: 8.88" (226 mm) Depth: 8.88" (226 mm) Height: 1.54" (39 mm) P GMC , : 8.60" (218 mm) ID: 7.60" (193 mm) : 7.00" (178 mm) P607320, OVAL Chrysler Width: 12.91" (328 mm) Height: 9.84" (250 mm) : 3.06" (78 mm) P Toyota , : 10.25" (260 mm) ID: 7.18" (182 mm) : 1.75" (44 mm) P AIR PANEL GMC ; ACDelco A1614C;GMC Width: 10.68" (271 mm) Depth: 7.95" (202 mm) Height: 1.62" (41 mm) P607310, OVAL Chrysler Width: 8.77" (223 mm) Height: 7.27" (185 mm) : 2.25" (57 mm) P GMC ; Isuzu : 10.31" (262 mm) ID: 7.94" (202 mm) : 0.41" (10 mm) P AIR PANEL, VENTILATION Ford E9SE-9601-AB Width: 9.55" (243 mm) Depth: 9.55" (243 mm) Height: 1.59" (40 mm) P Atlas Copco : 5.94" (151 mm) ID: 3.56" (90 mm) : 2.78" (71 mm) P AIR PANEL, VENTILATION Ford F3XY-9601-A; Nissan B000 Width: 7.10" (180 mm) Depth: 10.88" (276 mm) Height: 1.61" (41 mm) P607314, SPECIAL Foam Blanket for PA1765 Width: 24.00" (610 mm) Depth: 26.00" (660 mm) Height: 0.50" (13 mm) P AIR PANEL, VENTILATION Saturn , Width: 9.48" (241 mm) Depth: 5.71" (145 mm) Height: 1.32" (34 mm) P AIR PANEL, VENTILATION Chrysler ; Volkswagen Width: 13.18" (335 mm) Depth: 5.25" (133 mm) Height: 1.65" (42 mm) P GMC : 5.75" (146 mm) ID: 3.64" (92 mm) : 4.94" (125 mm) P AIR SAFETY GMC ; Suzuki A0 : 9.45" (240 mm) ID: 8.82" (224 mm) : 1.81" (46 mm) P Atlas Copco ; Petter CF4223LT : 5.44" (138 mm) ID: 3.25" (83 mm) : 4.75" (121 mm) P Nissan : 6.38" (162 mm) ID: 3.69" (94 mm) : 5.00" (127 mm) Page 250

253 P Ford E1VZ-9601-A, F1UZ-9601-A : 11.63" (295 mm) ID: 8.38" (213 mm) : 4.42" (112 mm) P AIR PANEL, VENTILATION GMC ; Toyota Width: 12.20" (310 mm) Depth: 6.10" (155 mm) Height: 1.55" (39 mm) P AIR PANEL, VENTILATION GMC Width: 13.77" (350 mm) Depth: 4.16" (106 mm) Height: 1.65" (42 mm) P AIR SECONDARY Ford E9NN-9R500-AB; New Holland : 4.34" (110 mm) ID: 3.00" (76 mm) : 11.57" (294 mm) P AIR PANEL, VENTILATION Chrysler , Width: 8.86" (225 mm) Depth: 7.74" (197 mm) Height: 1.40" (36 mm) P607345, FINNED John Deere AM : 4.25" (108 mm) ID: 2.22" (56 mm) : 7.13" (181 mm) P GMC : 20.73" (527 mm) ID: 10.58" (269 mm) : 7.53" (191 mm) P Mitsubishi MD : 9.16" (233 mm) ID: 6.80" (173 mm) : 7.53" (191 mm) P AIR PANEL, VENTILATION Honda P0A-A00; Isuzu Width: 7.24" (184 mm) Depth: 11.91" (303 mm) Height: 2.01" (51 mm) P AIR SECONDARY Case K : 2.97" (75 mm) ID: 1.86" (47 mm) : 9.94" (252 mm) P AIR PANEL, VENTILATION Honda P2N-A01 Width: 7.85" (199 mm) Depth: 7.55" (192 mm) Height: 2.04" (52 mm) P Ford F7CZ-9601-A : 6.87" (174 mm) ID: 3.41" (87 mm) : 7.90" (201 mm) P AIR PANEL, VENTILATION Honda PAA-000, PAA-A00 Width: 10.77" (274 mm) Depth: 6.61" (168 mm) Height: 1.74" (44 mm) P AIR PANEL, VENTILATION Honda P8C-A00 Width: 12.72" (323 mm) Depth: 6.42" (163 mm) Height: 2.95" (75 mm) P AIR PANEL, VENTILATION Chrysler AB, AC Width: 9.05" (230 mm) Depth: 1.49" (38 mm) Height: 7.03" (179 mm) P John Deere AL65051 : 5.24" (133 mm) ID: 3.25" (83 mm) : 12.50" (318 mm) P Ford E9NN-9B618-BA; New Holland : 8.04" (204 mm) ID: 3.75" (95 mm) : 13.12" (333 mm) P John Deere AT76215 : 7.31" (186 mm) ID: 4.00" (102 mm) : 13.38" (340 mm) Page 251

254 P Sullair : 8.50" (216 mm) ID: 4.06" (103 mm) : 14.06" (357 mm) P Ford D5NN-9B618-B : 10.06" (256 mm) ID: 5.68" (144 mm) : 16.38" (416 mm) P AIR PANEL, VENTILATION Waukesha A, C Width: 19.50" (495 mm) Depth: 25.50" (648 mm) Height: 6.13" (156 mm) P International C1 : 6.59" (167 mm) ID: 3.81" (97 mm) : 17.33" (440 mm) P Torit 8PP : 12.69" (322 mm) ID: 8.38" (213 mm) : 22.50" (572 mm) P607368, KONEPAC Mack 57MD45M P New Holland : 9.88" (251 mm) ID: 6.00" (152 mm) : 16.00" (406 mm) P Ingersoll-Rand : 13.75" (349 mm) ID: 9.50" (241 mm) : 27.50" (699 mm) P Endustra 51049; Torit 8PP : 7.94" (202 mm) ID: 3.59" (91 mm) : 16.50" (419 mm) P AIR SECONDARY Ingersoll-Rand : 9.25" (235 mm) ID: 8.00" (203 mm) : 25.20" (640 mm) P Chrysler AA : 4.96" (126 mm) ID: 3.33" (85 mm) : 6.25" (159 mm) P Quincy ; Worthington ELM64 : 12.56" (319 mm) ID: 7.50" (191 mm) : 21.00" (533 mm) P Endustra 51055S : 12.78" (325 mm) ID: 0.50" (13 mm) : 26.50" (673 mm) P John Deere AL78869 : 8.88" (226 mm) ID: CLOSED : 12.25" (311 mm) P Vortox VF160D : 11.90" (302 mm) ID: 7.13" (181 mm) : 16.38" (416 mm) P AIR CLEANER, DISPOSABLE Farr , A Body Diameter: 11.50" (292 mm) : 7.00" (178 mm) : 16.88" (429 mm) P John Deere RE46310 : 9.04" (230 mm) ID: 5.80" (147 mm) : 17.17" (436 mm) P Farr : 10.92" (277 mm) ID: 6.75" (171 mm) : 25.56" (649 mm) Page 252

255 P Farr , G; Thomas : 9.67" (246 mm) ID: 6.00" (152 mm) : 19.80" (503 mm) P AIR SAFETY, OVAL DONALDSON PSD12 SERIES POWERCORE Width: 9.47" (241 mm) Height: 1.57" (40 mm) : 14.47" (368 mm) P607673, CYLINDRICAL DONALDSON SPIRACLE ELEMENT : 5.09" (129 mm) ID: 2.13" (54 mm) : 7.59" (193 mm) P607955, POWERCORE FREIGHTLINER M2 SERIES : 12.85" (326 mm) : 7.99" (203 mm) P AIR SAFETY, RADIALSEAL DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS : 11.61" (295 mm) ID: 9.29" (236 mm) : 22.31" (567 mm) P608306, RADIALSEAL DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS : 17.76" (451 mm) ID: 11.46" (291 mm) : 24.06" (611 mm) P AIR SAFETY, KONEPAC DONALDSON XRB12 SERIES : 5.94" (151 mm) ID: 4.31" (110 mm) : 19.65" (499 mm) P608533, POWERCORE DONALDSON PSD08 SERIES POWERCORE Height: 7.13" (181 mm) Width: 5.82" (148 mm) : 9.83" (250 mm) P607960, POWERCORE FREIGHTLINER M2 SERIES FLAME RETARDANT : 12.84" (326 mm) : 7.99" (203 mm) P AIR SAFETY, KONEPAC DONALDSON FKB06 SERIES : 3.56" (90 mm) ID: 2.44" (62 mm) : 12.80" (325 mm) P607965, POWERCORE FREIGHTLINER M2 SERIES HIGH HP : 14.84" (377 mm) : 7.99" (203 mm) P BULK TANKS : 11.03" (280 mm) ID: 5.84" (148 mm) : 19.38" (492 mm) P608116, KONEPAC DONALDSON XRB12 SERIES : 12.20" (310 mm) ID: 4.45" (113 mm) : 20.41" (519 mm) P608665, POWERCORE DONALDSON PSD09 SERIES POWERCORE Height: 7.26" (184 mm) Width: 4.75" (121 mm) : 12.56" (319 mm) P AIR SAFETY Freightliner M2 Series Emergency Vehicles, Flame Retardant : 6.89" (175 mm) ID: 5.89" (150 mm) : 14.23" (361 mm) P GASKET FRAM FA595 Series : 15.12" (384 mm) ID: 12.86" (327 mm) Cross Section: 0.38" (10 mm) P608666, POWERCORE DONALDSON PSD10 SERIES POWERCORE Height: 7.35" (187 mm) Width: 8.05" (204 mm) : 13.41" (341 mm) P608667, POWERCORE DONALDSON PSD12 SERIES POWERCORE Height: 9.31" (236 mm) Width: 10.00" (254 mm) : 15.06" (383 mm) Page 253

256 P608675, POWERCORE DONALDSON PSD09 SERIES POWERCORE Height: 11.20" (285 mm) Width: 7.39" (188 mm) : 12.56" (319 mm) P608676, POWERCORE DONALDSON PSD10 SERIES POWERCORE Height: 11.07" (281 mm) Width: 7.86" (200 mm) : 13.05" (331 mm) P608677, POWERCORE DONALDSON PSD12 SERIES POWERCORE Height: 13.25" (337 mm) Width: 10.06" (256 mm) : 15.06" (383 mm) P AIR PANEL, VENTILATION FREIGHTLINER 91559, BOA91559 Width: 10.63" (270 mm) Depth: 10.63" (270 mm) Height: 0.98" (25 mm) Efficiency 95%: 5 Micron P AIR PANEL, VENTILATION Caterpillar Width: 9.75" (248 mm) Depth: 1.03" (26 mm) Height: 15.30" (389 mm) P AIR PANEL, VENTILATION Caterpillar Width: 7.07" (180 mm) Depth: 1.44" (37 mm) Height: 12.50" (318 mm) P608766, POWERCORE CATERPILLAR BACKHOE LOADER Height: 6.89" (175 mm) Width: 9.06" (230 mm) : 6.42" (163 mm) P608885, RADIALSEAL DONALDSON FRG15, KOMATSU : 12.34" (314 mm) ID: 6.99" (178 mm) : 20.08" (510 mm) P609086, POWERCORE NAVISTAR C1 Height: 7.09" (180 mm) Width: 9.11" (232 mm) : 11.57" (295 mm) P609218, KONEPAC DONALDSON FKB05 SERIES : 4.79" (122 mm) ID: 4.03" (102 mm) : 12.92" (328 mm) P609221, KONEPAC DONALDSON FKB06 SERIES : 5.94" (151 mm) ID: 5.12" (130 mm) : 13.03" (331 mm) P AIR SAFETY INTERNATIONAL TRUCKS C1 : 3.58" (91 mm) ID: CLOSED : 15.25" (387 mm) P AIR PANEL, VENTILATION Caterpillar 9X8216 Width: 5.98" (152 mm) Depth: 2.19" (56 mm) Height: 26.96" (685 mm) P609447, RADIALSEAL Caterpillar : 6.47" (164 mm) ID: 3.58" (91 mm) : 11.42" (290 mm) P AIR SAFETY, RADIALSEAL DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS : 11.61" (295 mm) ID: 9.29" (236 mm) : 27.40" (696 mm) P609519, RADIALSEAL DONALDSON SSG SERIES RADIAL SEAL AIR CLEANERS : 17.76" (451 mm) ID: 11.46" (291 mm) : 29.25" (743 mm) P AIR SAFETY MISC INDUSTRIAL APPLICATIONS : 7.88" (200 mm) ID: 4.13" (105 mm) : 11.15" (283 mm) P AIR SAFETY, RADIALSEAL CATERPILLAR : 3.46" (88 mm) ID: 2.92" (74 mm) : 12.02" (305 mm) Page 254

257 P AIR PANEL Chrysler A Width: 10.00" (254 mm) Depth: 10.75" (273 mm) Height: 1.99" (51 mm) P AIR SAFETY John Deere RE46311 : 5.69" (145 mm) ID: 4.50" (114 mm) : 14.88" (378 mm) P610875, POWERCORE GM 6.6L Duramax Diesel : 9.26" (235 mm) : 6.28" (160 mm) P AIR SAFETY, KONEPAC DONALDSON XRB10 SERIES : 5.30" (135 mm) ID: 3.70" (94 mm) : 17.44" (443.0 mm) P611720, POWERCORE CHEVROLET EXPRESS VAN Height: 6.31" (160 mm) Width: 6.00" (152 mm) : 11.16" (283 mm) P611856, RADIALSEAL John Deere AT : 9.33" (237 mm) ID: 5.15" (131 mm) : 16.49" (419 mm) P610903, RADIALSEAL TOYOTA , : 5.44" (138 mm) ID: 3.20" (81 mm) : 10.71" (272 mm) P AIR SAFETY John Deere AT : 5.30" (135 mm) ID: 3.70" (94 mm) : 16.21" (412 mm) P AIR SAFETY, RADIALSEAL TOYOTA : 3.32" (84 mm) ID: 2.55" (65 mm) : 10.42" (265 mm) P611858, KONEPAC Hyster , Yale : 4.09" (104 mm) : 10.52" (267 mm) P610905, RADIALSEAL TOYOTA 17743U : 5.44" (138 mm) ID: 3.20" (81 mm) : 10.71" (272 mm) P611859, KONEPAC Hyster , Yale : 4.81" (122 mm) : 12.86" (327 mm) P AIR SAFETY DONALDSON FKB08 SERIES : 5.08" (129 mm) ID: 4.13" (104 mm) : 14.40" (366 mm) P DONALDSON FKB08 SERIES : 7.66" (195 mm) ID: 4.61" (117 mm) : 14.13" (359 mm) P JOHN DEERE RE24619, RE67829 : 6.84" (174 mm) ID: 3.48" (88 mm) : 12.00" (305 mm) Gasket ID: 3.95" (100 mm) P611539, KONEPAC DONALDSON XRB10 SERIES : 9.96" (253 mm) ID: 5.69" (144 mm) : 18.85" (478 mm) P612469, RADIALSEAL JOHN DEERE AH : 13.09" (332 mm) ID: 6.78" (172 mm) Height: 22.86" (581 mm) P AIR SAFETY, RADIALSEAL JOHN DEERE AH : 6.89" (175 mm) ID: 5.24" (133 mm) : 22.32" (567 mm) P AIR PANEL, VENTILATION VOLVO Width: 8.43" (214 mm) : 12.36" (314 mm) Height: 0.80" (20 mm) P AIR PANEL, ENGINE Mercedes Width: 10.87" (276 mm) Depth: 2.36" (60 mm) Height: 12.40" (315 mm) Page 255

258 P AIR PANEL, VENTILATION Mercedes Width: 6.34" (162 mm) Depth: 14.41" (366 mm) Height: 1.12" (28 mm) P Cummins/Fleetguard AF25708M : 11.00" (279 mm) ID: 7.93" (201 mm) : 20.44" (519 mm) P JOHN DEERE AT : 8.84" (225 mm) ID: 7.14" (182 mm) : 16.74" (425 mm) P AIR SAFETY, RADIALSEAL Volvo : 7.90" (201 mm) ID: 6.24" (158 mm) : 15.47" (393 mm) P AIR PANEL, VENTILATION FREIGHTLINER CENTURY Width: 10.07" (256 mm) Depth: 10.67" (271 mm) Height: 0.68" (17 mm) P AIR PANEL, VENTILATION INTERNATIONAL 4200, 4300, 4400, 7600, 8600 Width: 7.21" (183 mm) Depth: 12.49" (317 mm) Height: 0.99" (25 mm) P AIR SAFETY JOHN DEERE AT300488, AT : 4.81" (122 mm) ID: 3.63" (92 mm) : 15.96" (405 mm) P AIR PANEL, VENTILATION KENWORTH T2000 Width: 10.07" (256 mm) Depth: 13.97" (355 mm) Height: 0.68" (17 mm) P INTERNATIONAL C1 : 12.01" (305 mm) ID: 9.90" (251 mm) : 16.10" (409 mm) P AIR PANEL, VENTILATION PETERBILT 379 Width: 8.12" (206 mm) Depth: 11.94" (303 mm) Height: 0.79" (20 mm) P AIR SAFETY International C1 : 9.94" (252 mm) ID: 5.37" (136 mm) : 15.44" (392 mm) P AIR PANEL, VENTILATION PETERBILT 379 Width: 6.81" (173 mm) Depth: 10.94" (278 mm) Height: 0.68" (17 mm) P LETOURNEAU : 13.85" (352 mm) ID: 10.12" (257 mm) : 22.00" (559 mm) P AIR PANEL, VENTILATION FREIGHTLINER COLUMBIA & CORONADO Width: 7.68" (195 mm) Depth: 8.59" (218 mm) Height: 0.71" (18 mm) P613522, POWERCORE FORD 7C DC, 6.4L DIESEL F SERIES Height: 8.78" (223 mm) Width: 6.04" (153 mm) : 12.21" (310 mm) P AIR PANEL, VENTILATION FREIGHTLINER CENTURY Width: 12.61" (320 mm) Depth: 13.40" (340 mm) Height: 0.32" (8 mm) P AIR CLEANER, DISPOSABLE FARR ECO SE Body Diameter: 7.75" (197 mm) Inlet Location: 5.54" (141 mm) Inlet Diameter: 6.00" (152 mm) : 17.20" (437 mm) Outlet ID: 4.00" (102 mm) P AIR PANEL, VENTILATION INTERNATIONAL 9670 & 4300 Width: 12.61" (320 mm) Depth: 13.40" (340 mm) Height: 0.79" (20 mm) Page 256

259 P AIR PANEL, VENTILATION VOLVO VN Width: 6.46" (164 mm) Depth: 6.46" (164 mm) Height: 0.32" (8 mm) P AIR PANEL, VENTILATION CATERPILLAR EQUIPMENT Width: 8.91" (227 mm) Depth: 1.82" (46 mm) Height: 11.27" (287 mm) P AIR PANEL, ENGINE MERCEDES Width: 10.4" (265 mm) Depth: 14" (355 mm) Height: 2.29" (58 mm) P AIR PANEL FORD E-SERIES VAN 4C2U9601AB Width: 6.79" (172 mm) Depth: 12.29" (312 mm) Height: 3.30" (84 mm) P AIR PANEL FORD/LINCOLN LIGHT DUTY TRUCK 4L3Z9601BA Height: 8.50" (216 mm) Width: 11.30" (287 mm) Depth: 1.41" (36 mm) P AIR PANEL, VENTILATION JOHN DEERE RE48882 Width: 7.18" (182 mm) Depth: 9.03" (229 mm) Height: 1.63" (41 mm) P AIR PANEL CHRYSLER AA, AA Height: 8.28" (210 mm) Width: 11.50" (292 mm) Depth: 1.51" (38 mm) P AIR PANEL, VENTILATION FREIGHTLINER Height: 7.62" (194 mm) Width: 8.66" (220 mm) Depth: 0.98" (25 mm) P AIR PANEL, VENTILATION FREIGHTLINER VCC Height: 8.62" (219 mm) Width: 8.39" (213 mm) Depth: 0.98" (25 mm) P614563, RADIALSEAL CHEVROLET KIAK, GMC TOPKICK, C4500 & C5500 SERIES : 7.80" (198 mm) ID: 4.40" (111 mm) : 17.40" (442 mm) P616056, POWERCORE KENWORTH T660 Height: 9.84" (250 mm) Width: 9.96" (253 mm) : 17.35" (441 mm) P : 2.13" (54 mm) ID: 1.06" (27 mm) : 3.43" (87 mm) P : 3.98" (101 mm) : 8.62" (219 mm) P MANITOU NOREMAT SOFRALUB : 2.76" (70 mm) ID: 1.65" (42 mm) : 7.64" (194 mm) P HYDRAULIC STRAINER FIOA 220/6 : 3.98" (101 mm) Thread Size: G 2 : 8.62" (219 mm) P HYDRAULIC STRAINER FIOA 220/3 : 3.97" (101 mm) Thread Size: G 2 : 8.62" (219 mm) P O & K : 1.81" (46 mm) ID: 0.70" (18 mm) : 5.98" (152 mm) Efficiency Beta 2: 44 Micron P AGCO M1 : 0.43" (11 mm) : 1.73" (44 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) P GASKET FIK03 GASKET P : 1.73" (44 mm) ID: 0.87" (22 mm) : 3.58" (91 mm) Page 257

260 P : 1.77" (45 mm) ID: 1.02" (26 mm) : 4.45" (113 mm) P HYDAC 0140D010BNHC : 1.81" (46 mm) ID: 0.87" (22 mm) : 7.60" (193 mm) Efficiency Beta 75: 10 Micron P : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) P : 3.74" (95 mm) ID: 1.61" (41 mm) : 7.99" (203 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P HYDRAULIC STRAINER FAL : 2.99" (73 mm) ID: 1.50" (38 mm) : 8.19" (208 mm) P : 3.39" (86 mm) ID: 1.73" (44 mm) : 2.36" (60 mm) P : 2.05" (52 mm) Thread Size: M18 x 1.5 ID: 1.77" (45 mm) Radius: 2.13" (54 mm) P761050, CYLINDRICAL : 2.05" (52 mm) Thread Size: G 3/8 : 2.09" (53 mm) P FS 7/1 : 2.83" (72 mm) Thread Size: G 1/2 ID: 2.52" (64 mm) Radius: 2.91" (74 mm) P : 4.25" (108 mm) Thread Size: G 1 ID: 2.99" (76 mm) Radius: 3.58" (91 mm) P : 5.20" (132 mm) Thread Size: 50 ID: 3.94" (100 mm) Radius: 5.83" (148 mm) P Hydraulic Assemblies, FBO CS4/1 : 4.33" (110 mm) ID: 2.95" (75 mm) : 3.23" (82 mm) P : 5.91" (150 mm) ID: 3.35" (85 mm) : 12.99" (330 mm) P FIAT : 5.91" (150 mm) ID: 3.35" (85 mm) : 12.99" (330 mm) P HYDRAULIC SPIN-ON, DURAMAX SCANIA : 3.82" (97 mm) Thread Size: M23 x 1.5 : 4.45" (113 mm) P : 4.96" (126 mm) ID: 3.62" (92 mm) : 34.13" (867 mm) P : 4.96" (126 mm) ID: 3.62" (92 mm) : 34.13" (867 mm) P NEW HOLLAND : 2.76" (70 mm) ID: 1.65" (42 mm) : 8.27" (210 mm) P FAIREY ARLON TXX1110 : 7.95" (202 mm) ID: 0.06" (2 mm) : 17.32" (440 mm) P CATERPILLAR : 1.97" (50 mm) ID: 0.94" (24 mm) : 8.15" (207 mm) P ATLAS : 7.95" (202 mm) ID: 0.06" (2 mm) : 12.99" (330 mm) P NEW HOLLAND : 1.97" (50 mm) ID: 0.94" (24 mm) : 4.45" (113 mm) P : 1.77" (45 mm) ID: 0.98" (25 mm) : 3.43" (87 mm) Page 258

261 P NEW HOLLAND : 3.66" (93 mm) ID: 1.89" (48 mm) : 12.60" (320 mm) P ARGO K : 3.89" (99 mm) ID: 1.96" (50 mm) : 10.84" (275 mm) Efficiency 95%: 2 Micron P CR800/6 : 5.51" (140 mm) ID: 2.56" (65 mm) : 15.75" (400 mm) P CR150/6 : 2.76" (70 mm) ID: 1.65" (42 mm) : 8.27" (210 mm) P CR220/6 : 5.51" (140 mm) ID: 2.56" (65 mm) : 5.35" (136 mm) P : 4.45" (113 mm) ID: 1.89" (48 mm) : 5.79" (147 mm) P : 3.58" (91 mm) ID: 0.83" (21 mm) : 9.13" (232 mm) P CASE : 5.91" (150 mm) ID: 3.35" (85 mm) : 9.45" (240 mm) P HYDRAULIC SPIN-ON : 3.82" (97 mm) Thread Size: M24 x 2 : 5.83" (148 mm) P MANN AND HUMMEL H7101 : 2.72" (69 mm) ID: 1.34" (34 mm) : 4.09" (104 mm) P HYDRAULIC STRAINER KOMATSU : 5.51" (140 mm) Thread Size: G 2 : 13.58" (345 mm) P HYDRAULIC STRAINER : 3.74" (95 mm) Thread Size: G 1 1/4 : 7.24" (184 mm) P CR600/03 : 5.51" (140 mm) ID: 2.56" (65 mm) : 9.88" (251 mm) P HYDRAULIC STRAINER KOMATSU : 5.51" (140 mm) Thread Size: G 2 : 9.72" (247 mm) P MANN & HUMMEL H7101 : 1.97" (50 mm) ID: 0.94" (24 mm) : 6.22" (158 mm) Efficiency Beta 75: 25 Micron P LUGLI, : 4.84" (123 mm) ID: 3.94" (100 mm) : 11.14" (283 mm) P SCANIA : 3.35" (85 mm) ID: 3.30" (84 mm) : 3.34" (85 mm) Efficiency Beta 75: 22 Micron P CR500/6 : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 5.39" (137 mm) P : 5.51" (140 mm) ID: 2.56" (65 mm) : 7.99" (203 mm) P : 2.76" (70 mm) ID: 1.14" (29 mm) : 5.12" (130 mm) P : 3.74" (95 mm) ID: 3.74" (95 mm) : 6.69" (170 mm) P VOLVO : 2.20" (56 mm) ID: 1.12" (28 mm) : 2.66" (68 mm) Efficiency Beta 75: 22 Micron P : 3.39" (86 mm) ID: 2.36" (60 mm) : 9.06" (230 mm) Page 259

262 P HITACHI : 6.89" (175 mm) ID: 4.33" (110 mm) : 17.71" (450 mm) Efficiency Beta 2: 10 Micron P : 2.13" (54 mm) ID: 1.06" (27 mm) : 8.90" (226 mm) P : 1.97" (50 mm) ID: 0.94" (24 mm) : 8.15" (207 mm) P FAIREY ARLON TXW4-GDL6 : 4.17" (106 mm) ID: 2.51" (64 mm) : 7.48" (190 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON TXW5-GDL6 : 4.17" (106 mm) ID: 2.52" (64 mm) : 10.20" (259 mm) P FAIREY ARLON TXW5A-GDL6 : 4.17" (106 mm) ID: 2.52" (64 mm) : 18.31" (465 mm) P FAIREY ARLON TXW8C-GDL6 : 4.96" (126 mm) ID: 3.62" (92 mm) : 18.90" (480 mm) Efficiency Beta 75: 5 Micron P FAIREY ARLON TXW8A-GDL6 : 4.96" (126 mm) ID: 3.62" (92 mm) : 11.42" (290 mm) P CASE : 5.51" (140 mm) Thread Size: 2-1/2 NPT : 12.40" (315 mm) P : 1.97" (50 mm) ID: 0.94" (24 mm) : 6.22" (158 mm) P PARKER 170L123 : 2.20" (56 mm) ID: 0.74" (19 mm) : 2.63" (67 mm) Efficiency Beta 75: 25 Micron P : 3.39" (86 mm) ID: 1.57" (40 mm) : 5.47" (139 mm) Efficiency Beta 75: 3 Micron P HYDRAULIC STRAINER KOMATSU : 2.95" (75 mm) Thread Size: G 1 : 7.09" (180 mm) P HYDRAULIC FILTER : 5.07" (129 mm) ID: 3.35" (85 mm) : 9.45" (240 mm) P HYDRAULIC FILTER : 9.21" (234 mm) ID: 6.69" (170 mm) : 9.25" (234 mm) P HYDRAULIC FILTER : 5.07" (129 mm) ID: 3.35" (85 mm) : 9.84" (250 mm) P Tamrock : 2.83" (72 mm) ID: 1.77" (45 mm) : 13.78" (350 mm) P HYDRAULIC FILTER : 4.41" (112 mm) ID: 1.42" (36 mm) : 7.32" (186 mm) P HYDRAULIC FILTER : 1.97" (50 mm) ID: 1.97" (50 mm) : 11.02" (280 mm) P HYDRAULIC FILTER : 5.07" (129 mm) ID: 3.35" (85 mm) : 9.45" (240 mm) P HYDRAULIC FILTER : 4.61" (117 mm) ID: 2.32" (59 mm) : 19.49" (495 mm) P KOMATSU , : 5.91" (150 mm) ID: 3.80" (97 mm) : 17.76" (451 mm) Page 260

263 P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 15.75" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 15.75" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.58" (66 mm) : 15.74" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 10 Micron P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 15.75" (400 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.12" (130 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 30 Micron P P WITH DIFFERENT COVERS : 5.12" (130 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 90 Micron P P WITH DIFFERENT COVERS : 5.12" (130 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS : 5.12" (130 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT MEDIA + SPIRAL LINER Ø76 : 5.00" (127 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency Beta 2: 10 Micron P P WITH DIFFERENT COVERS : 5.12" (130 mm) ID: 2.56" (65 mm) : 9.84" (250 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH SIMILAR COVERS + SPIRAL LINER Ø76 : 5.08" (129 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS + SPIRAL LINER Ø76 : 5.08" (129 mm) ID: 2.05" (52 mm) : 5.35" (126 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Page 261

264 P P WITH DIFFERENT COVERS : 5.08" (129 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P P WITH DIFFERENT COVERS + SPIRAL LINER Ø76 : 5.08" (129 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) Efficiency 95%: 10 Micron P CR250 : 5.08" (129 mm) ID: 2.05" (52 mm) : 5.35" (136 mm) Relief Valve Setting: 22 PSI (1.52 Bar) P New Holland : 3.66" (93 mm) ID: 1.89" (48 mm) : 10.16" (258 mm) P HYDRAULIC SPIN-ON Case tractor M and U serie : 4.57" (116 mm) Thread Size: 1 3/8-12 : 11.57" (294 mm) P HYDRAULIC SPIN-ON HP : 3.82" (97 mm) Thread Size: 1 3/8-12 : 3.98" (101 mm) P HYDRAULIC SPIN-ON ATLAS COPCO COMPRESSORS : 3.81" (97 mm) Thread Size: 1-12 : 8.15" (207 mm) P FL K (Venieri MF04124). : 3.07" (78 mm) ID: 1.59" (40 mm) : 10.12" (257 mm) P HYDRAULIC SPIN-ON MAHLE HC35 : 5.35" (136 mm) Thread Size: 1 1/2-16 : 12.04" (306 mm) Efficiency Beta 2: 2 Micron P Valtra : 2.87" (73 mm) ID: 1.26" (32 mm) : 3.50" (89 mm) P Valmet 355; 365; 455; 465; 555; 565; 665 : 2.87" (73 mm) ID: 1.26" (32 mm) : 7.09" (180 mm) P HYDRAULIC SPIN-ON Valtra : 3.78" (96 mm) Thread Size: M24 x 1.5 : 6.93" (176 mm) P HYDRAULIC SPIN-ON Donaldson branded version of HMK04 spin on P : 3.82" (97 mm) Thread Size: 13/16-16 : 5.95" (151 mm) P HYDRAULIC SPIN-ON Cartridge CA160/1R hexagonal housing : 5.08" (129 mm) Thread Size: G 1 1/4 : 7.05" (179 mm) P Fiat Kobelco W190 Cummins Engine 6CT8,3 / W270 Cummins Engine M11 : 2.20" (56 mm) ID: 0.93" (24 mm) : 6.69" (170 mm) P TAMROCK : 4.96" (126 mm) ID: 3.31" (84 mm) : 22.83" (580 mm) P Tamrock : 7.95" (202 mm) ID: 6.18" (157 mm) : 25.98" (660 mm) P KUBOTA ENGINE D850 (Diesel) All : 1.92" (49 mm) Thread Size: 3/4 NPT : 5.87" (149 mm) P Manitou : 3.36" (85 mm) Thread Size: G 2 : 10.15" (258 mm) P Volvo Bus Olympian , NH (CNH) FX/TX series ,Daewoo CE Mega serie S : 2.20" (56 mm) ID: 1.00" (25 mm) : 4.02" (102 mm) P Vogele S serie : 4.01" (102 mm) ID: 2.48" (63 mm) : 12.99" (330 mm) Page 262

265 P HYDRAULIC SPIN-ON GIMA H1 : 5.04" (128 mm) Thread Size: M45 x 2 : 7.09" (180 mm) P HYDRAULIC SPIN-ON Gima H1,Massey Fergusson M2 : 5.04" (128 mm) Thread Size: M42x 2 : 3.94" (100 mm) P HYDRAULIC SPIN-ON Sauer Danfoss : 3.82" (97 mm) Thread Size: 1 3/8-12 : 7.08" (180 mm) P HYDRAULIC STRAINER FIOA 160/6 : 3.31" (84 mm) Thread Size: G 1 1/2 : 5.12" (130 mm) P HYDRAULIC STRAINER FIOA 160/3 : 3.31" (84 mm) Thread Size: G 1 1/2 : 5.12" (130 mm) P Fendt F : 2.75" (70 mm) ID: 0.98" (25 mm) : 7.87" (200 mm) P Palfinger EA610A : 2.36" (60 mm) ID: 1.14" (29 mm) : 7.91" (201 mm) P HYDRAULIC SPIN-ON John deere tractors AL : 3.82" (97 mm) Thread Size: 1 3/8-12 : 6.22" (158 mm) P NH : 5.91" (150 mm) Thread Size: M10 : 26.57" (675 mm) P : 2.76" (70 mm) ID: 2.50" (64 mm) : 7.09" (180 mm) P HYDRAULIC SPIN-ON CASE combines A1 : 4.76" (121 mm) Thread Size: 1 3/8-12 : 11.61" (295 mm) P HYDRAULIC SPIN-ON JCB : 3.70" (94 mm) Thread Size: 1 3/8-12 : 7.13" (181 mm) P AIR SAFETY MASSEY FERGUSON M1 : 2.76" (70 mm) ID: 2.40" (61 mm) : 10.02" (255 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY FIAT GEOTECH , RENAULT : 2.76" (70 mm) ID: 2.40" (61 mm) : 12.13" (308 mm) Bolt Hole Diameter: 0.66" (17 mm) P770397, KONEPAC FIAT, SAME : 5.83" (148 mm) ID: 3.21" (82 mm) : 12.42" (315 mm) Gasket : 6.73" (171 mm) P AIR SAFETY DONALDSON EUROPE AIR CLEANERS : 3.64" (92 mm) ID: 2.40" (61 mm) : 11.14" (283 mm) P AIR SAFETY DONALDSON FLB AIR CLEANER : 5.95" (151 mm) ID: 4.85" (123 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY MASSEY FERGUSON M1 : 3.36" (85 mm) ID: 2.93" (74 mm) : 9.00" (229 mm) Bolt Hole Diameter: 0.66" (17 mm) P DEUTZ : 6.10" (155 mm) ID: 3.46" (88 mm) : 13.46" (342 mm) Bolt Hole Diameter: 0.75" (19 mm) Gasket ID: 4.72" (120 mm) P DEUTZ : 6.10" (155 mm) ID: 3.46" (88 mm) : 10.57" (269 mm) Gasket : 4.82" (123 mm) Gasket ID: 4.45" (113 mm) P AIR SAFETY BEPCO GROUP LTD 1629 : 3.38" (86 mm) ID: 2.89" (74 mm) : 8.99" (228 mm) Page 263

266 Page 264 P JOHN DEERE AL30395 : 3.38" (86 mm) ID: 2.93" (74 mm) : 13.07" (332 mm) Gasket : 3.74" (95 mm) Gasket ID: 3.47" (88 mm) Bolt Hole Diameter: 0.66" (17 mm) P COOPERS AEK2234 : 7.93" (201 mm) ID: 7.49" (190 mm) : 16.00" (406 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P771003, KONEPAC RENAULT RVI , MACK : 8.66" (220 mm) ID: 5.20" (132 mm) : 15.00" (381 mm) Gasket : 7.05" (179 mm) Gasket ID: 3.03" (77 mm) P AIR SAFETY FIAT GEOTECH : 7.28" (185 mm) ID: 6.18" (157 mm) : 19.29" (490 mm) P WALGAHN-MOTORENTECHN : 9.21" (234 mm) ID: 7.59" (193 mm) : 9.99" (254 mm) Bolt Hole Diameter: 0.56" (14 mm) Gasket ID: 7.64" (194 mm) P DRONNINGBORG : 7.93" (201 mm) ID: 4.45" (113 mm) : 12.99" (330 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.50" (114 mm) P LEYLAND-DAF : 7.95" (202 mm) ID: 3.54" (90 mm) : 13.54" (344 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.72" (120 mm) P MERCEDES-BENZ , KHD : 8.94" (227 mm) ID: 4.58" (116 mm) : 14.61" (371 mm) Bolt Hole Diameter: 0.44" (11 mm) Gasket ID: 5.42" (138 mm) P M.A.N : 9.55" (243 mm) ID: 5.18" (132 mm) : 19.69" (500 mm) Gasket : 6.63" (169 mm) Gasket ID: 6.26" (159 mm) P MERCEDES-BENZ : 10.91" (277 mm) ID: 6.30" (160 mm) : 10.12" (257 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 5.82" (148 mm) P771511, FINNED FIAT : 7.95" (202 mm) ID: 3.54" (90 mm) : 14.09" (358 mm) Gasket ID: 6.36" (162 mm) Minor : 0.66" (17 mm) P LEYLAND-DAF BBU7280 : 9.21" (234 mm) ID: 4.86" (123 mm) : 16.57" (421 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 7.28" (185 mm) P LEYLAND-DAF ACU2889 : 9.21" (234 mm) ID: 4.84" (123 mm) : 11.56" (294 mm) Gasket : 7.68" (195 mm) Gasket ID: 7.30" (186 mm) P IVECO-FIAT , KHD : 8.90" (226 mm) ID: 4.57" (116 mm) : 11.69" (297 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 5.82" (148 mm) P Clean MA521 : 12.75" (324 mm) ID: 8.38" (213 mm) : 19.99" (508 mm) Gasket ID: 10.12" (257 mm) P DONALDSON FLB12 : 10.40" (264 mm) ID: 6.04" (153 mm) : 15.98" (406 mm) Gasket ID: 6.38" (162 mm) P RENAULT/RVI : 12.09" (307 mm) ID: 7.71" (196 mm) : 18.54" (471 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P FIAT GEOTECH , ATLAS COPCO : 9.21" (234 mm) ID: 4.86" (123 mm) : 15.98" (406 mm) Gasket ID: 6.38" (162 mm)

267 P MACK/RVI FRI COACH : 12.09" (307 mm) ID: 7.71" (196 mm) : 16.22" (412 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P ATLAS COPCO : 10.39" (264 mm) ID: 6.06" (154 mm) : 15.98" (406 mm) P : 12.09" (307 mm) ID: 7.72" (196 mm) : 10.57" (269 mm) Gasket : 11.61" (295 mm) Gasket ID: 11.24" (286 mm) P Agco M91 : 13.81" (351 mm) ID: 9.44" (240 mm) : 13.99" (355 mm) Gasket : 13.82" (351 mm) Gasket ID: 12.83" (326 mm) Bolt Hole Diameter: 0.56" (14 mm) P FIAT GEOTECH : 9.21" (234 mm) ID: 4.86" (123 mm) : 13.54" (344 mm) Gasket ID: 6.38" (162 mm) P VOLVO , : 12.05" (306 mm) ID: 8.03" (204 mm) : 8.42" (214 mm) Gasket : 12.42" (316 mm) Gasket ID: 12.05" (306 mm) P VOLVO , ATLAS , LISTER : 6.97" (177 mm) ID: 3.46" (88 mm) : 15.51" (394 mm) Gasket ID: 4.72" (120 mm) P FIAT GEOTECH : 8.35" (212 mm) ID: 4.86" (123 mm) : 16.54" (420 mm) P771531, FINNED BENFRA : 3.72" (95 mm) ID: 2.92" (74 mm) : 13.50" (343 mm) Gasket ID: 6.26" (159 mm) P MASSEY FERGUSON M1 : 8.34" (212 mm) ID: 4.84" (123 mm) : 12.99" (330 mm) P OLSSONS I ELLOS AB AR79941 : 7.32" (186 mm) ID: 4.72" (120 mm) : 14.88" (378 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 4.72" (120 mm) P AC A1005C : 6.83" (173 mm) ID: 3.48" (88 mm) : 13.97" (355 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.72" (120 mm) P MASSEY FERGUSON M1 : 6.10" (155 mm) ID: 3.46" (88 mm) : 12.58" (320 mm) Gasket : 4.82" (123 mm) Gasket ID: 4.45" (113 mm) P : 5.24" (133 mm) ID: 2.64" (67 mm) : 8.48" (216 mm) Gasket : 3.52" (89 mm) Gasket ID: 3.15" (80 mm) P John Deere AH69798 : 6.08" (154 mm) ID: 3.48" (88 mm) : 9.99" (254 mm) Bolt Hole Diameter: 0.75" (19 mm) Gasket ID: 4.50" (114 mm) P IHC R1 : 6.85" (174 mm) ID: 4.24" (108 mm) : 9.06" (230 mm) P : 6.10" (155 mm) ID: 3.46" (88 mm) : 12.58" (320 mm) Gasket : 4.82" (123 mm) Gasket ID: 4.45" (113 mm) P AGCO M1 : 6.61" (168 mm) ID: 3.74" (95 mm) : 14.72" (374 mm) Gasket ID: 4.72" (120 mm) Page 265

268 P771547, FINNED FIAT GEOTECH : 5.24" (133 mm) ID: 2.64" (67 mm) : 11.54" (293 mm) Gasket : 4.06" (103 mm) Gasket ID: 3.68" (93 mm) P771548, FINNED JOHN DEERE AL30394 : 6.09" (155 mm) ID: 3.48" (88 mm) : 14.11" (358 mm) Gasket ID: 4.72" (120 mm) P BOMAG, PERKINS : 5.44" (138 mm) ID: 2.86" (73 mm) : 11.46" (291 mm) Gasket ID: 4.13" (105 mm) P771550, FINNED CASE T , LANDROVER NTC3535, MF M91 : 6.10" (155 mm) ID: 3.47" (88 mm) : 15.87" (403 mm) Gasket : 5.10" (130 mm) Gasket ID: 4.72" (120 mm) P VOLVO : 10.55" (268 mm) ID: 7.68" (195 mm) : 11.18" (284 mm) Gasket ID: 8.46" (215 mm) P SAME , LISTER : 5.51" (140 mm) ID: 2.83" (72 mm) : 12.01" (305 mm) Gasket ID: 4.15" (105 mm) P771555, FINNED FIAT GEOTECH : 7.91" (201 mm) ID: 5.32" (135 mm) : 16.54" (420 mm) Gasket ID: 6.36" (162 mm) P DEUTZ , KHD : 6.46" (164 mm) ID: 3.41" (87 mm) : 13.07" (332 mm) Gasket ID: 4.15" (105 mm) P M.A.N : 11.89" (302 mm) ID: 7.52" (191 mm) : 18.66" (474 mm) Bolt Hole Diameter: 0.43" (11 mm) Gasket ID: 8.70" (221 mm) P LEYLAND-DAF 37H6186 : 6.61" (168 mm) ID: 7.85" (200 mm) : 10.98" (279 mm) Gasket ID: 3.70" (94 mm) P LEYLAND-DAF 37H6581 : 5.43" (138 mm) ID: 2.83" (72 mm) : 19.13" (486 mm) P DAF, SCANIA, DEUTZ, KHD : 7.80" (198 mm) ID: 4.44" (113 mm) : 14.40" (366 mm) Bolt Hole Diameter: 0.34" (9 mm) Gasket ID: 5.00" (127 mm) P BEPCO GROUP LTD 1619 : 6.83" (173 mm) ID: 4.23" (107 mm) : 9.99" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.72" (120 mm) P MERCEDES-BENZ : 5.43" (138 mm) ID: 2.85" (72 mm) : 11.56" (294 mm) Gasket : 4.51" (115 mm) Gasket ID: 4.13" (105 mm) P : 12.76" (324 mm) ID: 8.39" (213 mm) : 19.00" (483 mm) Gasket : 10.49" (267 mm) Gasket ID: 10.12" (257 mm) P LISTER : 5.51" (140 mm) ID: 2.83" (72 mm) : 13.98" (355 mm) Gasket ID: 4.15" (105 mm) P SCANIA #261185, MANN & H C30880/1 : 11.89" (302 mm) ID: 7.52" (191 mm) : 19.06" (484 mm) P R.V.I. DGE SPAIN : 11.88" (302 mm) ID: 7.51" (191 mm) : 17.71" (450 mm) Page 266

269 P DAF : 11.89" (302 mm) ID: 7.52" (191 mm) : 14.98" (380 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 8.46" (215 mm) P MERCEDES-BENZ : 7.80" (198 mm) ID: 4.11" (104 mm) : 10.12" (257 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 4.96" (126 mm) P MERCEDES-BENZ : 12.83" (326 mm) ID: 6.57" (167 mm) : 13.94" (354 mm) Bolt Hole Diameter: 0.43" (11 mm) Gasket ID: 7.32" (186 mm) P MERCEDES-BENZ : 12.83" (326 mm) ID: 7.60" (193 mm) : 9.57" (243 mm) P CLARK , HYSTER : 6.10" (155 mm) ID: 3.46" (88 mm) : 11.57" (294 mm) Bolt Hole Diameter: 0.75" (19 mm) Gasket ID: 4.50" (114 mm) P TOYOTA A : 5.24" (133 mm) ID: 2.64" (67 mm) : 11.56" (294 mm) Gasket : 4.35" (110 mm) Gasket ID: 3.98" (101 mm) P MASSEY FERGUSON M1 : 6.10" (155 mm) ID: 3.46" (88 mm) : 11.10" (282 mm) Gasket ID: 4.72" (120 mm) P MASSEY FERGUSON M1 : 6.97" (177 mm) ID: 3.46" (88 mm) : 11.10" (282 mm) Gasket ID: 4.72" (120 mm) P MASSEY FERGUSON M1 : 5.43" (138 mm) ID: 2.83" (72 mm) : 12.01" (305 mm) Gasket ID: 4.15" (105 mm) P KOBELCO VV : 5.24" (133 mm) ID: 2.63" (67 mm) : 10.98" (279 mm) Gasket ID: 4.15" (105 mm) P FENDT F : 6.46" (164 mm) ID: 3.41" (87 mm) : 9.37" (238 mm) Gasket ID: 4.15" (105 mm) P DEUTZ : 6.46" (164 mm) ID: 3.41" (87 mm) : 8.35" (212 mm) Gasket ID: 4.15" (105 mm) P MERCEDES-BENZ : 12.87" (327 mm) ID: 6.33" (161 mm) : 10.16" (258 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 7.28" (185 mm) P LEYLAND-DAF ABU9896 : 9.21" (234 mm) ID: 4.84" (123 mm) : 16.00" (406 mm) Gasket ID: 7.63" (194 mm) P O&K HR120C EXCAVATOR : 12.09" (307 mm) ID: 7.72" (196 mm) : 23.00" (584 mm) Bolt Hole Diameter: 0.90" (23 mm) Gasket ID: 8.12" (206 mm) P Mercedes : 9.53" (242 mm) ID: 5.18" (132 mm) : 19.13" (486 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 6.25" (159 mm) P LEYLAND-DAF ABU9145 : 8.43" (214 mm) ID: 4.00" (102 mm) : 22.91" (582 mm) P FIAT , MF M1 : 10.39" (264 mm) ID: 6.06" (154 mm) : 16.54" (420 mm) Gasket ID: 6.38" (162 mm) Page 267

270 P LONG LIFE VERSION OF P : 7.72" (196 mm) ID: 12.09" (307 mm) : 18.54" (471 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P JOHN DEERE DOX18913, FIAT : 9.22" (234 mm) ID: 4.84" (123 mm) : 15.98" (406 mm) Gasket ID: 6.38" (162 mm) P IHC-DRESSER H1, FIAT : 12.09" (307 mm) ID: 7.72" (196 mm) : 16.20" (411 mm) Bolt Hole Diameter: 0.67" (17 mm) Gasket ID: 9.56" (243 mm) P FIAT AGRI , OREN & KOPPEL : 10.40" (264 mm) ID: 6.04" (153 mm) : 15.98" (406 mm) Gasket ID: 6.26" (159 mm) P LONG LIFE VERSION OF P : 6.97" (177 mm) ID: 3.46" (88 mm) : 15.51" (394 mm) Gasket ID: 4.72" (120 mm) P FIAT AGRI : 9.22" (234 mm) ID: 4.84" (123 mm) : 15.98" (406 mm) Gasket ID: 6.38" (162 mm) P FIAT : 10.39" (264 mm) ID: 6.06" (154 mm) : 16.54" (420 mm) Gasket ID: 6.26" (159 mm) P FIAT GEOTECH : 6.97" (177 mm) ID: 3.46" (88 mm) : 13.54" (344 mm) Gasket ID: 4.72" (120 mm) P FIAT GEOTECH , PEGASO : 12.09" (307 mm) ID: 7.73" (196 mm) : 20.55" (522 mm) Bolt Hole Diameter: 0.67" (17 mm) Gasket ID: 9.00" (229 mm) P FIAT : 7.91" (201 mm) ID: 5.32" (135 mm) : 16.54" (420 mm) Bolt Hole Diameter: 0.67" (17 mm) Gasket ID: 7.17" (182 mm) P CAT , FIAT , PERKINS : 5.43" (138 mm) ID: 2.83" (72 mm) : 12.01" (305 mm) Gasket ID: 4.15" (105 mm) P772550, FINNED FIAT , VOLVO : 6.09" (155 mm) ID: 3.48" (88 mm) : 14.98" (380 mm) Gasket ID: 4.75" (121 mm) P MACOSULLAIR , OK : 5.51" (140 mm) ID: 2.83" (72 mm) : 12.01" (305 mm) Gasket ID: 4.15" (105 mm) P FIAT : 6.10" (155 mm) ID: 3.46" (88 mm) : 13.94" (354 mm) Gasket ID: 4.72" (120 mm) P772555, FINNED CAT , FIAT , PERKINS : 7.91" (201 mm) ID: 5.32" (135 mm) : 16.54" (420 mm) Gasket ID: 6.36" (162 mm) P FIAT AGRI : 6.09" (155 mm) ID: 3.48" (88 mm) : 15.96" (405 mm) Gasket ID: 4.75" (121 mm) P FIAT GEOTECH : 6.10" (155 mm) ID: 3.46" (88 mm) : 13.46" (342 mm) Bolt Hole Diameter: 0.75" (19 mm) Gasket ID: 4.72" (120 mm) P FIAT GEOTECH : 5.43" (138 mm) ID: 2.83" (72 mm) : 13.98" (355 mm) Gasket ID: 4.15" (105 mm) Page 268

271 P LEYLAND-DAF MKZ2802 : 12.09" (307 mm) ID: 7.73" (196 mm) : 18.58" (472 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.00" (229 mm) P IVECO-PEGASO : 12.09" (307 mm) ID: 7.73" (196 mm) : 20.55" (522 mm) P772578, RADIALSEAL FIAT , L.PETTER : 4.13" (105 mm) ID: 2.68" (68 mm) : 11.81" (300 mm) P KOMATSU : 7.91" (201 mm) ID: 5.32" (135 mm) : 17.87" (454 mm) Gasket ID: 6.38" (162 mm) P : 12.09" (307 mm) ID: 7.72" (196 mm) : 16.57" (421 mm) Gasket : 8.48" (216 mm) Gasket ID: 8.11" (206 mm) P773605, FINNED JCB 32/ : 6.10" (155 mm) ID: 3.46" (88 mm) : 15.51" (394 mm) P772579, RADIALSEAL FIAT , L.PETTER : 5.52" (140 mm) ID: 3.50" (89 mm) : 12.93" (328 mm) P772580, RADIALSEAL FIAT , CAT , IR : 6.50" (165 mm) ID: 3.96" (101 mm) : 13.90" (353 mm) P PERLINI A : 12.09" (307 mm) ID: 7.73" (196 mm) : 24.57" (624 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.00" (229 mm) P RENAULT RVI : 11.10" (282 mm) ID: 6.73" (171 mm) : 15.35" (390 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (246 mm) P RENAULT RVI : 12.09" (307 mm) ID: 7.73" (196 mm) : 15.35" (390 mm) P FIAT : 9.65" (245 mm) ID: 6.04" (153 mm) : 16.54" (420 mm) Bolt Hole Diameter: 0.63" (16 mm) Gasket ID: 6.26" (159 mm) P JOHN DEERE AZ45868 : 12.09" (307 mm) ID: 7.73" (196 mm) : 22.56" (573 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P AIR SAFETY, RADIALSEAL FIAT GEOTECH , L. PETTER : 2.40" (61 mm) ID: 1.89" (48 mm) : 11.42" (290 mm) P AIR SAFETY, RADIALSEAL FIAT , L.PETTER , MACOSLR : 3.31" (84 mm) ID: 2.62" (67 mm) : 12.56" (319 mm) P AIR SAFETY PERLINI A : 7.28" (185 mm) ID: 6.22" (158 mm) : 23.82" (605 mm) Bolt Hole Diameter: 0.65" (17 mm) P AIR SAFETY JCB : 3.39" (86 mm) ID: 2.93" (74 mm) : 10.16" (258 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY FIAT ALLIS : 3.39" (86 mm) ID: 2.93" (74 mm) : 12.13" (308 mm) Bolt Hole Diameter: 0.66" (17 mm) Page 269

272 P AIR SAFETY RENAULT RVI : 7.28" (185 mm) ID: 6.22" (158 mm) : 14.57" (370 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY FIAT GEOTECH : 5.94" (151 mm) ID: 4.84" (123 mm) : 14.37" (365 mm) Bolt Hole Diameter: 0.66" (17 mm) P775631, RADIALSEAL GEHL : 4.13" (105 mm) ID: 2.68" (68 mm) : 11.81" (300 mm) P COOPERS AEK2172 : 3.26" (83 mm) ID: 1.65" (42 mm) : 7.00" (178 mm) Bolt Hole Diameter: 0.43" (11 mm) P IVECO : 5.82" (148 mm) ID: 3.09" (78 mm) : 12.71" (323 mm) P AIR SAFETY AR FILTER AR308 : 6.37" (162 mm) ID: 5.27" (134 mm) : 14.80" (376 mm) P TOYOTA : 5.24" (133 mm) ID: 2.64" (67 mm) ID: 11.08" (282 mm) P KOMATSU Z , JCB KAP0482 : 4.09" (104 mm) ID: 2.49" (63 mm) : 10.55" (268 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 2.87" (73 mm) P KOMATSU Z : 3.27" (83 mm) ID: 1.65" (42 mm) : 7.51" (191 mm) Gasket : 2.50" (64 mm) Gasket ID: 2.13" (54 mm) P AIR SAFETY FENDT X : 2.87" (73 mm) ID: 2.86" (73 mm) : 7.48" (190 mm) Bolt Hole Diameter: 0.33" (8 mm) P775732, FINNED HINO : 7.95" (202 mm) ID: 4.57" (116 mm) : 11.81" (300 mm) Gasket ID: 4.72" (120 mm) Minor : 0.53" (13 mm) P775749, FINNED NISSAN H10 : 4.09" (104 mm) ID: 2.49" (63 mm) : 8.03" (204 mm) Gasket : 3.74" (95 mm) Gasket ID: 2.52" (64 mm) Minor : 0.66" (17 mm) P RENAULT RVI : 12.09" (307 mm) ID: 7.73" (196 mm) : 15.75" (400 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P IVECO : 12.87" (327 mm) ID: 9.56" (243 mm) : 18.11" (460 mm) P : 9.21" (234 mm) ID: 4.84" (123 mm) : 16.54" (420 mm) Gasket : 6.75" (172 mm) Gasket ID: 6.38" (162 mm) P SCANIA : 9.53" (242 mm) ID: 5.21" (132 mm) : 20.87" (530 mm) Bolt Hole Diameter: 0.43" (11 mm) Gasket ID: 6.26" (159 mm) P SCANIA : 12.09" (307 mm) ID: 7.73" (196 mm) : 17.24" (438 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.56" (243 mm) P : 10.39" (264 mm) ID: 6.04" (154 mm) : 15.61" (397 mm) Gasket : 8.48" (216 mm) Gasket ID: 8.11" (206 mm) Page 270

273 P775945, KONEPAC VOLVO : 7.36" (187 mm) ID: 4.68" (119 mm) : 23.31" (592 mm) Gasket : 6.10" (155 mm) Gasket ID: 3.39" (86 mm) P AIR PANEL, VENTILATION Width: 11.61" (295 mm) Depth: 2.19" (56 mm) Height: 15.55" (395 mm) P AIR SAFETY KOMATSU K1480 : 4.57" (116 mm) ID: 3.46" (88 mm) : 16.54" (420 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY JOHN DEERE AZ45867 : 7.28" (185 mm) ID: 6.22" (158 mm) : 21.89" (556 mm) Bolt Hole Diameter: 0.65" (17 mm) P776157, KONEPAC LEYLAND-DAF BBU8384 : 11.50" (292 mm) ID: 6.57" (167 mm) : 19.72" (501 mm) Gasket : 10.35" (263 mm) Gasket ID: 5.41" (137 mm) Minor : 0.65" (17 mm) P776158, KONEPAC FORD 81DB-9601-TB : 7.01" (178 mm) ID: 3.62" (92 mm) : 15.63" (397 mm) Gasket : 5.98" (152 mm) Gasket ID: 2.46" (62 mm) Minor : 0.65" (17 mm) P776159, KONEPAC E.R.F , LEYLAND-DAF : 8.27" (210 mm) ID: 4.74" (120 mm) : 18.58" (472 mm) Gasket : 7.17" (182 mm) Gasket ID: 3.39" (86 mm) Minor : 0.65" (17 mm) P IVECO PEGASO : 9.55" (243 mm) ID: 5.18" (132 mm) : 16.56" (421 mm) Gasket : 6.63" (169 mm) Gasket ID: 6.26" (159 mm) P RENAULT : 11.73" (298 mm) ID: 8.66" (220 mm) : 15.78" (401 mm) P MAN : 11.89" (302 mm) ID: 7.52" (191 mm) : 13.31" (338 mm) P IVECO : 9.48" (241 mm) ID: 6.22" (158 mm) : 11.10" (282 mm) P : 7.91" (201 mm) ID: 5.31" (135 mm) : 16.54" (420 mm) Gasket : 6.75" (172 mm) Gasket ID: 6.38" (162 mm) P FIAT ALLIS : 8.74" (222 mm) ID: 6.16" (156 mm) : 8.19" (208 mm) P AIR SAFETY FIAT ALLIS : 5.35" (136 mm) ID: 4.00" (102 mm) : 6.93" (176 mm) P CASE K : 5.24" (133 mm) ID: 3.23" (82 mm) : 11.57" (294 mm) Gasket : 4.13" (105 mm) Gasket ID: 3.76" (96 mm) P776356, FINNED JCB 32/ : 4.09" (104 mm) ID: 2.49" (63 mm) : 8.54" (217 mm) Gasket ID: 2.87" (73 mm) P AIR SAFETY JCB 32/ : 2.28" (58 mm) ID: 2.04" (52 mm) : 7.13" (181 mm) Bolt Hole Diameter: 0.66" (17 mm) P776358, FINNED JCB 32/ : 5.24" (133 mm) ID: 2.83" (72 mm) : 13.98" (355 mm) Gasket ID: 3.89" (99 mm) Minor : 0.47" (12 mm) Page 271

274 P776360, FINNED ARRF ARM27-50, FRAM CA4412, FTGD AF1829 : 5.24" (133 mm) ID: 2.83" (72 mm) : 8.50" (216 mm) Gasket ID: 3.89" (99 mm) Minor : 0.47" (12 mm) P MERCEDES : 10.47" (266 mm) ID: 5.25" (133 mm) : 9.13" (232 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 5.86" (149 mm) P AIR PANEL, VENTILATION FIAT Width: 6.00" (152 mm) Depth: 2.20" (56 mm) Height: 17.17" (436 mm) P776615, FINNED TOYOTA : 5.24" (133 mm) ID: 3.30" (84 mm) : 11.57" (294 mm) Gasket ID: 3.89" (99 mm) Minor : 0.47" (12 mm) P AIR SAFETY TOYOTA : 3.19" (81 mm) ID: 2.50" (64 mm) : 10.39" (264 mm) Bolt Hole Diameter: 0.49" (12 mm) P776636, FINNED TOYOTA : 5.24" (133 mm) ID: 2.50" (64 mm) : 11.57" (294 mm) Gasket ID: 3.97" (101 mm) Minor : 0.47" (12 mm) P FIAT : 9.65" (245 mm) ID: 6.04" (153 mm) : 13.58" (345 mm) Bolt Hole Diameter: 0.65" (17 mm) Gasket ID: 6.26" (159 mm) P AIR SAFETY FIAT GEOTECH : 5.94" (151 mm) ID: 4.84" (123 mm) : 12.01" (305 mm) Bolt Hole Diameter: 0.66" (17 mm) P AIR SAFETY CASE E41535 : 2.60" (66 mm) ID: 2.12" (54 mm) : 10.39" (264 mm) Bolt Hole Diameter: 0.34" (9 mm) P AIR SAFETY CASE E43789 : 2.91" (74 mm) ID: 1.89" (48 mm) : 10.20" (259 mm) Bolt Hole Diameter: 0.33" (8 mm) P AIR SAFETY MANN & HUMMEL CF800 : 3.62" (92 mm) ID: 2.80" (71 mm) : 13.46" (342 mm) Bolt Hole Diameter: 0.69" (18 mm) P AIR SAFETY MANN & HUMMEL CF1000 : 4.37" (111 mm) ID: 0.69" (18 mm) : 14.65" (372 mm) P AIR SAFETY MANN & HUMMEL CF1200 : 4.76" (121 mm) ID: 3.94" (100 mm) : 14.93" (379 mm) Bolt Hole Diameter: 0.69" (18 mm) P AIR SAFETY MANN & HUMMEL CF1300 : 5.55" (141 mm) ID: 4.65" (118 mm) : 18.64" (473 mm) Bolt Hole Diameter: 0.69" (18 mm) P CASE E43790 : 5.24" (133 mm) ID: 3.23" (82 mm) : 11.48" (292 mm) Gasket : 4.33" (110 mm) Gasket ID: 3.96" (101 mm) P CASE E46373 : 5.24" (133 mm) ID: 3.66" (93 mm) : 15.53" (395 mm) Gasket : 4.51" (115 mm) Gasket ID: 4.13" (105 mm) P776730, FINNED TOYOTA : 5.24" (133 mm) ID: 3.22" (82 mm) : 11.42" (290 mm) Gasket ID: 3.89" (99 mm) Minor : 0.47" (12 mm) P776765, KONEPAC E.R.F : 9.88" (251 mm) ID: 6.22" (158 mm) : 19.53" (496 mm) Gasket : 8.35" (212 mm) Gasket ID: 4.02" (102 mm) Minor : 0.66" (17 mm) Page 272

275 P776830, FINNED JCB 32/ : 6.10" (155 mm) ID: 3.46" (88 mm) : 11.77" (299 mm) Gasket ID: 4.45" (113 mm) P AIR SAFETY JCB 32/ : 2.76" (70 mm) ID: 2.40" (61 mm) : 7.24" (184 mm) Bolt Hole Diameter: 0.66" (17 mm) P RANGE ROVER NTC 6660 : 5.24" (133 mm) ID: 2.62" (67 mm) : 11.57" (294 mm) P COMPAIR 98262/109 : 6.50" (165 mm) ID: 4.06" (103 mm) : 10.04" (255 mm) Gasket : 4.13" (105 mm) Gasket ID: 3.76" (96 mm) P : 10.39" (264 mm) ID: 6.04" (154 mm) : 22.91" (582 mm) Gasket : 8.48" (216 mm) Gasket ID: 8.11" (206 mm) P VOLVO , , : 10.66" (271 mm) ID: 6.22" (158 mm) : 22.44" (570 mm) Bolt Hole Diameter: 0.51" (13 mm) Gasket ID: 7.32" (186 mm) P VOLVO , , : 12.24" (311 mm) ID: 7.87" (200 mm) : 14.13" (359 mm) Bolt Hole Diameter: 0.46" (12 mm) Gasket ID: 8.70" (221 mm) P CATERPILLAR : 10.39" (264 mm) ID: 6.02" (153 mm) : 17.99" (457 mm) Gasket ID: 6.26" (159 mm) P : 10.02" (255 mm) ID: 6.83" (174 mm) : 18.09" (460 mm) Gasket : 7.54" (192 mm) Gasket ID: 7.17" (182 mm) P BEDFORD : 6.47" (164 mm) ID: 3.86" (98 mm) : 14.09" (358 mm) P KUBOTA : 5.23" (133 mm) ID: 2.87" (73 mm) : 11.02" (280 mm) Bolt Hole Diameter: 0.55" (14 mm) Gasket ID: 6.97" (177 mm) P DAF TRUCK : 7.79" (198 mm) ID: 4.09" (104 mm) : 14.37" (365 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 4.96" (126 mm) P DAF : 11.88" (302 mm) ID: 7.51" (191 mm) : 14.37" (365 mm) P DAF : 8.89" (226 mm) ID: 4.61" (117 mm) : 14.61" (371 mm) P DAF , PERKINS CV20948 : 11.06" (281 mm) ID: 6.77" (172 mm) : 20.08" (510 mm) P O & K : 7.73" (196 mm) ID: 6.06" (154 mm) : 14.05" (357 mm) P VIRGIS CH12826 : 8.41" (214 mm) ID: 4.80" (122 mm) : 10.90" (277 mm) P777409, RADIALSEAL VOLVO : 11.10" (282 mm) ID: 6.77" (172 mm) : 20.08" (510 mm) Page 273

276 P AIR SAFETY, RADIALSEAL VOLVO : 5.94" (151 mm) ID: 4.31" (109 mm) : 19.82" (504 mm) P LISTER PETTER : 5.74" (146 mm) ID: 4.09" (104 mm) : 2.52" (64 mm) P AIR SAFETY FENDT F : 2.76" (70 mm) ID: 1.97" (50 mm) : 11.16" (283 mm) Bolt Hole Diameter: 0.69" (18 mm) P AIR SAFETY MERCEDES : 3.15" (80 mm) ID: 2.25" (57 mm) : 12.83" (326 mm) Bolt Hole Diameter: 0.69" (18 mm) P AIR SAFETY MANN & HUMMEL CF1620 : 5.98" (152 mm) ID: 5.35" (136 mm) : 13.18" (335 mm) P AIR SAFETY MANN & HUMMEL CF1610 : 5.98" (152 mm) ID: 5.47" (139 mm) : 14.80" (376 mm) P AIR SAFETY ATLAS COPCO : 6.38" (162 mm) ID: 5.47" (139 mm) : 18.54" (471 mm) Bolt Hole Diameter: 0.69" (18 mm) P AIR PANEL, VENTILATION CATERPILLAR 6C-9926 Width: 9.84" (250 mm) Depth: 0.95" (24 mm) Height: 11.81" (300 mm) P AIR SAFETY, RADIALSEAL FENDT : 3.85" (98 mm) ID: 3.11" (79 mm) : 13.18" (335 mm) P777578, RADIALSEAL FENDT H : 3.93" (100 mm) ID: 7.48" (190 mm) : 13.28" (337 mm) P777579, RADIALSEAL M.A.N : 12.01" (305 mm) ID: 6.65" (169 mm) : 18.58" (472 mm) P777588, RADIALSEAL M.A.N. : 7.95" (202 mm) ID: 4.84" (123 mm) : 14.57" (370 mm) P777592, RADIALSEAL DAF ACHD040 : 8.17" (208 mm) ID: 20.35" (517 mm) : 3.14" (80 mm) P777638, RADIALSEAL FENDT, JCB, LIEBHERR : 8.19" (208 mm) ID: 4.33" (110 mm) : 16.14" (410 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG10 AIR CLEANER : 4.27" (108 mm) ID: 3.44" (87 mm) : 15.75" (400 mm) : 4.00" (102 mm) P AIR SAFETY DEUTZ : 3.15" (80 mm) ID: 2.24" (57 mm) : 7.87" (200 mm) Bolt Hole Diameter: 0.35" (9 mm) P VOLVO , : 10.67" (271 mm) ID: 6.22" (158 mm) : 23.19" (589 mm) Gasket ID: 7.32" (186 mm) P KOMATSU 20701K1190 : 10.87" (276 mm) ID: 6.50" (165 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.89" (23 mm) Gasket ID: 8.38" (213 mm) Page 274

277 P AIR SAFETY KOMATSU 20701K1210 : 6.43" (163 mm) ID: 5.28" (134 mm) : 13.98" (355 mm) Bolt Hole Diameter: 0.67" (17 mm) P AIR SAFETY, RADIALSEAL ATLAS WEYHAUSEN : 4.13" (105 mm) ID: 3.58" (91 mm) : 14.06" (357 mm) P777868, RADIALSEAL TEREX : 12.31" (313 mm) ID: 6.99" (178 mm) : 20.08" (510 mm) P AIR SAFETY, RADIALSEAL TEREX : 7.08" (180 mm) ID: 5.90" (150 mm) : 19.72" (501 mm) P777871, RADIALSEAL TEREX , VOLVO : 12.32" (313 mm) ID: 7.01" (178 mm) : 22.44" (570 mm) P AIR SAFETY, RADIALSEAL TEREX , VOLVO : 6.85" (174 mm) ID: 5.82" (148 mm) : 21.97" (558 mm) P AIR SAFETY RENAULT : 7.28" (185 mm) ID: 6.18" (157 mm) : 17.32" (440 mm) P AIR SAFETY SURE FILTER SFA1451S : 4.27" (108 mm) ID: 3.44" (87 mm) : 5.61" (142 mm) P FIAT : 14.64" (372 mm) ID: 9.44" (240 mm) : 19.68" (500 mm) P AIR SAFETY MASSEY FERGUSON M1 : 2.95" (75 mm) ID: 1.89" (48 mm) : 11.18" (284 mm) Bolt Hole Diameter: 0.33" (8 mm) P DAF 19G101, BAU1475 : 5.24" (133 mm) ID: 2.81" (71 mm) : 18.56" (471 mm) Gasket : 4.27" (109 mm) Gasket ID: 3.90" (99 mm) P BEDFORD : 6.09" (155 mm) ID: 3.47" (88 mm) : 8.35" (212 mm) Gasket : 4.82" (123 mm) Gasket ID: 4.45" (113 mm) P ROVER NRC9238 : 5.24" (133 mm) ID: 2.81" (71 mm) : 8.84" (225 mm) Gasket : 4.27" (109 mm) Gasket ID: 3.90" (99 mm) P AWD : 6.10" (155 mm) ID: 3.47" (88 mm) : 8.31" (211 mm) Gasket : 5.37" (137 mm) Gasket ID: 5.00" (127 mm) P LEYLAND DAF ACU8498 : 9.21" (234 mm) ID: 4.84" (123 mm) : 15.57" (396 mm) Gasket : 7.99" (203 mm) Gasket ID: 7.62" (194 mm) P AIR SAFETY MANN & HUMMEL CF811 : 3.62" (92 mm) ID: 2.80" (71 mm) : 12.76" (324 mm) Bolt Hole Diameter: 0.43" (11 mm) P LEYLAND : 4.09" (104 mm) ID: 2.52" (64 mm) : 10.31" (262 mm) Gasket : 3.46" (88 mm) Gasket ID: 3.09" (79 mm) P : 6.10" (155 mm) ID: 3.48" (88 mm) : 12.58" (320 mm) Gasket : 4.82" (123 mm) Gasket ID: 4.45" (113 mm) Page 275

278 P : 10.39" (264 mm) ID: 6.04" (154 mm) : 9.57" (243 mm) Gasket : 7.01" (178 mm) Gasket ID: 6.63" (169 mm) P FARYMAN DIESEL : 5.00" (127 mm) ID: 2.52" (64 mm) : 6.46" (164 mm) Bolt Hole Diameter: 0.33" (8 mm) P778335, RADIALSEAL SCANIA : 11.96" (304 mm) ID: 6.81" (173 mm) : 17.09" (434 mm) P LANCER BOSS P15324 : 11.54" (293 mm) ID: 7.40" (188 mm) : 14.88" (378 mm) P MANITOU : 6.10" (155 mm) ID: 3.46" (88 mm) : 11.73" (298 mm) Bolt Hole Diameter: 0.67" (17 mm) Gasket ID: 4.72" (120 mm) P AIR SAFETY VOLVO , : 6.88" (175 mm) ID: 6.10" (155 mm) : 21.22" (539 mm) P778336, RADIALSEAL SCANIA : 12.00" (305 mm) ID: 6.65" (169 mm) : 20.24" (514 mm) P KOMATSU : 6.11" (155 mm) ID: 3.38" (86 mm) : 11.85" (301 mm) Bolt Hole Diameter: 0.63" (16 mm) Gasket ID: 7.64" (194 mm) P AIR SAFETY KOMATSU : 3.31" (84 mm) ID: 2.60" (66 mm) : 11.02" (280 mm) Bolt Hole Diameter: 0.63" (16 mm) P KOMATSU Z : 4.09" (104 mm) ID: 2.48" (63 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.26" (7 mm) Gasket ID: 2.56" (65 mm) P RENAULT : 6.59" (167 mm) ID: 3.14" (80 mm) : 11.96" (304 mm) P AIR SAFETY JCB : 2.76" (70 mm) ID: 2.40" (61 mm) : 10.98" (279 mm) Bolt Hole Diameter: 0.67" (17 mm) P DEUTZ : 4.33" (110 mm) ID: 1.99" (51 mm) : 8.58" (218 mm) Bolt Hole Diameter: 0.33" (8 mm) P MASSEY FERGUSON M1, M1 : 5.22" (133 mm) ID: 2.95" (75 mm) : 12.28" (312 mm) Bolt Hole Diameter: 0.53" (13 mm) Gasket ID: 3.93" (100 mm) P VOLVO , : 10.16" (258 mm) ID: 6.30" (160 mm) : 21.56" (548 mm) Gasket : 7.68" (195 mm) Gasket ID: 7.30" (186 mm) P DAF : 9.49" (241 mm) ID: 5.19" (132 mm) : 14.33" (364 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 6.26" (159 mm) P AIR SAFETY, RADIALSEAL M.A.N : 6.75" (172 mm) ID: 5.30" (135 mm) : 18.11" (460 mm) P RENAULT : 7.93" (202 mm) ID: 4.57" (116 mm) : 14.15" (360 mm) Gasket : 5.43" (138 mm) Gasket ID: 5.06" (129 mm) Page 276

279 P MERCEDES BENZ : 6.50" (165 mm) ID: 3.43" (87 mm) : 13.39" (340 mm) Bolt Hole Diameter: 0.33" (8 mm) Gasket ID: 4.15" (105 mm) P MERCEDES BENZ : 8.31" (211 mm) ID: 4.06" (103 mm) : 8.27" (210 mm) P VOLVO : 12.87" (327 mm) ID: 7.51" (191 mm) : 18.38" (467 mm) Bolt Hole Diameter: 0.43" (11 mm) Gasket ID: 9.49" (241 mm) P778507, RADIALSEAL IVECO : 6.14" (156 mm) ID: 3.14" (80 mm) : 9.80" (249 mm) P778509, RADIALSEAL IVECO : 6.14" (156 mm) ID: 3.15" (80 mm) : 13.54" (344 mm) P VOLVO : 13.82" (351 mm) ID: 8.23" (209 mm) : 14.09" (358 mm) Bolt Hole Diameter: 0.51" (13 mm) Gasket ID: 8.70" (221 mm) P MERCEDES BENZ : 11.89" (302 mm) ID: 7.52" (191 mm) : 18.15" (461 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 8.46" (215 mm) P AIR SAFETY, RADIALSEAL DYNAPAC : 4.12" (105 mm) ID: 3.58" (91 mm) : 14.21" (361 mm) : 3.98" (101 mm) P778638, RADIALSEAL DYNAPAC : 8.18" (208 mm) ID: 4.17" (106 mm) : 14.53" (369 mm) P778674, RADIALSEAL Van Hool Bus : 12.34" (313 mm) ID: 7.00" (178 mm) : 22.44" (570 mm) P CASE IH : 8.36" (212 mm) ID: 3.42" (87 mm) : 13.85" (352 mm) P Volvo : 13.97" (355 mm) ID: 7.99" (203 mm) : 16.45" (418 mm) P VOLVO : 13.09" (332 mm) ID: 7.99" (203 mm) : 16.22" (412 mm) Bolt Hole Diameter: 0.39" (10 mm) Gasket ID: 4.00" (102 mm) P ZETOR : 6.09" (155 mm) ID: 3.47" (88 mm) : 10.96" (279 mm) Gasket ID: 4.72" (120 mm) P AIR SAFETY JCB : 3.74" (95 mm) ID: 2.93" (74 mm) : 10.08" (256 mm) Bolt Hole Diameter: 0.67" (17 mm) P AIR SAFETY ATLAS COPCO : 2.76" (70 mm) ID: 2.40" (61 mm) : 9.06" (230 mm) Bolt Hole Diameter: 0.66" (17 mm) P KOMATSU 20801K1210 : 12.09" (307 mm) ID: 7.71" (196 mm) : 15.65" (398 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 9.00" (229 mm) P AIR SAFETY KOMATSU 20801K1220 : 7.28" (185 mm) ID: 6.20" (157 mm) : 15.18" (386 mm) Bolt Hole Diameter: 0.65" (17 mm) Page 277

280 P778905, RADIALSEAL LIEBHERR , VOLVO : 9.33" (237 mm) ID: 5.15" (131 mm) : 18.15" (461 mm) P AIR SAFETY, RADIALSEAL VOLVO : 17.90" (455 mm) ID: 5.29" (135 mm) : 3.70" (94 mm) P778924, RADIALSEAL KAESSBOHRER : 11.95" (303 mm) ID: 6.88" (175 mm) : 17.99" (457 mm) P MANN & HUMMEL Europiclon C16400 : 6.30" (160 mm) ID: 3.82" (97 mm) : 14.80" (376 mm) P MANN & HUMMEL Europiclon C11100 : 4.48" (114 mm) ID: 2.64" (67 mm) : 9.43" (240 mm) P MANN & HUMMEL Europiclon C14200 : 4.88" (124 mm) ID: 3.03" (77 mm) : 12.13" (308 mm) P MANN & HUMMEL Europiclon C15300 : 5.91" (150 mm) ID: 3.44" (87 mm) : 13.62" (346 mm) P MANN & HUMMEL Europiclon C20500 : 7.44" (189 mm) ID: 4.61" (117 mm) : 15.23" (387 mm) P LIEBHERR : 12.88" (327 mm) ID: 8.50" (216 mm) : 23.77" (604 mm) Bolt Hole Diameter: 0.41" (10 mm) Gasket ID: 9.56" (243 mm) P AIR SAFETY MANN & HUMMEL Europiclon CF400 : 3.35" (85 mm) ID: 2.79" (71 mm) : 14.15" (359 mm) P AIR SAFETY MANN & HUMMEL Europiclon CF100 : 2.20" (56 mm) ID: 1.78" (45 mm) : 9.33" (237 mm) P AIR SAFETY MANN & HUMMEL Europiclon CF200 : 2.56" (65 mm) ID: 2.16" (55 mm) : 12.02" (305 mm) P AIR SAFETY MANN & HUMMEL Europiclon : 2.95" (75 mm) ID: 2.55" (65 mm) : 13.52" (343 mm) P AIR SAFETY MANN & HUMMEL Europiclon CF500 : 4.13" (105 mm) ID: 3.73" (95 mm) : 15.21" (386 mm) P AIR PANEL, VENTILATION CAT 3E-0410 Width: 7.00" (178 mm) Depth: 1.02" (26 mm) Height: 9.00" (229 mm) P AIR PANEL, VENTILATION CAT 9X-3352 Width: 9.06" (230 mm) Depth: 2.19" (56 mm) Height: 9.06" (230 mm) P780164, SPECIAL CATERPILLAR 3E0411 Width: 7.01" (178 mm) Depth: 0.25" (6 mm) : 9.02" (229 mm) P DAF : 8.40" (213 mm) ID: 4.02" (102 mm) : 11.83" (300 mm) Gasket ID: 4.50" (114 mm) Page 278

281 P RENAULT : 12.09" (307 mm) ID: 7.71" (196 mm) : 18.80" (478 mm) Gasket : 9.93" (252 mm) Gasket ID: 9.56" (243 mm) P DAF : 8.74" (222 mm) ID: 4.76" (121 mm) : 14.80" (376 mm) P : 9.92" (252 mm) ID: 6.46" (164 mm) : 15.57" (396 mm) Gasket : 7.22" (184 mm) Gasket ID: 6.85" (174 mm) P JCB : 6.26" (159 mm) ID: 2.81" (71 mm) : 10.91" (277 mm) Gasket ID: 3.93" (100 mm) P : 5.85" (149 mm) ID: 2.83" (72 mm) : 12.15" (309 mm) Gasket : 3.52" (89 mm) Gasket ID: 3.15" (80 mm) P AIR PANEL, VENTILATION CAT 7X-6041 Width: 9.50" (241 mm) Depth: 2.19" (56 mm) Height: 12.25" (311 mm) P JCB : 7.62" (194 mm) ID: 3.64" (92 mm) : 10.90" (277 mm) Gasket ID: 4.72" (120 mm) P780331, RADIALSEAL KOMATSU 42401H0P03 : 11.09" (282 mm) ID: 6.57" (167 mm) : 15.94" (405 mm) P HINO D : 10.86" (276 mm) ID: 6.49" (165 mm) : 14.17" (360 mm) Bolt Hole Diameter: 0.89" (23 mm) Gasket ID: 7.40" (188 mm) P : 5.19" (132 mm) ID: 4.04" (103 mm) : 9.79" (249 mm) Gasket : 4.51" (115 mm) Gasket ID: 4.13" (105 mm) P HITACHI : 7.94" (202 mm) ID: 6.38" (162 mm) : 10.39" (264 mm) Bolt Hole Diameter: 0.87" (22 mm) Gasket ID: 6.00" (152 mm) P VOLVO : 10.65" (271 mm) ID: 6.97" (177 mm) : 22.95" (583 mm) Gasket ID: 7.30" (185 mm) P780522, RADIALSEAL DONALDSON FPG09 AIR CLEANERS : 7.34" (186 mm) ID: 4.17" (106 mm) : 15.26" (388 mm) P AIR SAFETY, RADIALSEAL DONALDSON FPG09 AIR CLEANERS : 4.27" (108 mm) ID: 3.45" (88 mm) : 14.83" (377 mm) P : 5.24" (133 mm) ID: 3.33" (85 mm) : 7.78" (198 mm) Gasket : 3.96" (101 mm) Gasket ID: 3.58" (91 mm) P780621, RADIALSEAL RVI : 12.32" (313 mm) ID: 7.71" (196 mm) : 21.37" (543 mm) P AIR SAFETY HANOMAG 42401HOP02 : 5.59" (142 mm) ID: 3.24" (83 mm) : 15.27" (388 mm) P Renault : 12.32" (313 mm) ID: 7.71" (196 mm) : 17.71" (450 mm) Page 279

282 P AIR SAFETY, RADIALSEAL RVI : 6.85" (174 mm) ID: 5.51" (140 mm) : 20.78" (528 mm) P AIR SAFETY, RADIALSEAL RVI : 6.85" (174 mm) ID: 5.51" (140 mm) : 17.48" (444 mm) P EVOBUS : 11.92" (303 mm) ID: 6.88" (175 mm) : 12.55" (319 mm) P VOLVO : 10.15" (258 mm) ID: 6.29" (160 mm) : 20.78" (528 mm) P Mercedes-Benz A : 16.53" (420 mm) ID: 9.96" (253 mm) : 12.00" (305 mm) Bolt Hole Diameter: 0.43" (11 mm) P MERCEDES BENZ : 16.53" (420 mm) ID: 9.96" (253 mm) : 9.84" (250 mm) Bolt Hole Diameter: 0.43" (11 mm) Gasket ID: 10.55" (268 mm) P : 5.24" (133 mm) ID: 3.24" (82 mm) : 12.17" (309 mm) Gasket : 4.23" (108 mm) Gasket ID: 3.86" (98 mm) P780910, RADIALSEAL DAF : 11.06" (281 mm) ID: 6.57" (167 mm) : 20.07" (510 mm) P DAF : 11.06" (281 mm) ID: 6.57" (167 mm) : 18.38" (467 mm) P781098, RADIALSEAL DONALDSON FRG18 Air Cleaner : 14.28" (363 mm) ID: 8.98" (228 mm) : 24.41" (620 mm) P AIR SAFETY, RADIALSEAL DONALDSON FRG18 Air Cleaner : 9.09" (231 mm) ID: 6.94" (176 mm) : 24.57" (624 mm) P AIR PANEL, VENTILATION Caterpillar 4I1278 Width: 4.84" (123 mm) Depth: 23.62" (600 mm) Height: 0.95" (24 mm) P : 12.31" (313 mm) ID: 6.99" (178 mm) : 23.04" (585 mm) P : 11.09" (282 mm) ID: 5.82" (148 mm) : 23.04" (585 mm) P AIR SAFETY NEW HOLLAND : 5.59" (142 mm) ID: 3.22" (82 mm) : 21.88" (556 mm) P AIR SAFETY, RADIALSEAL SCANIA Z : 6.75" (171 mm) ID: 5.15" (131 mm) : 19.82" (504 mm) P : 9.61" (244 mm) ID: 6.02" (153 mm) : 14.81" (376 mm) Gasket : 6.63" (169 mm) Gasket ID: 6.26" (159 mm) P : 5.94" (151 mm) ID: 4.84" (123 mm) : 13.78" (350 mm) Gasket : 5.33" (136 mm) Gasket ID: 4.96" (126 mm) P781039, RADIALSEAL DONALDSON FRG10 AIR CLEANERS : 8.18" (208 mm) ID: 4.17" (106 mm) : 16.12" (410 mm) P AIR PANEL, VENTILATION M&H Width: 5.94" (151 mm) Depth: 2.75" (70 mm) Height: 23.85" (606 mm) Page 280

283 P M&H C291219/1 : 11.06" (281 mm) ID: 4.99" (127 mm) : 15.94" (405 mm) P AIR SAFETY M&H CF2100 : 8.30" (211 mm) ID: 7.72" (196 mm) : 23.97" (609 mm) P AIR SAFETY M&H CF830 : 3.24" (82 mm) : 12.24" (311 mm) P M&H C23589 : 8.90" (226 mm) ID: 4.65" (118 mm) : 12.34" (314 mm) P781398, RADIALSEAL VOLVO : 14.28" (363 mm) ID: 8.98" (228 mm) : 18.90" (480 mm) P AIR SAFETY, RADIALSEAL VOLVO : 9.09" (231 mm) ID: 6.94" (176 mm) : 19.06" (484 mm) : 8.70" (221 mm) P MERCEDES-BENZ : 11.08" (282 mm) ID: 5.66" (144 mm) : 12.24" (311 mm) P AIR DRYER SPIN ON Mercedes-Benz : Actros I, Actros II, Atego, Vario : 5.51" (140 mm) Thread Size: M39 x 1.5 : 6.50" (165 mm) P DYNAPAC : 8.14" (207 mm) ID: 4.61" (117 mm) : 20.03" (509 mm) P AIR SAFETY DYNAPAC : 4.27" (108 mm) ID: 3.47" (88 mm) : 19.72" (501 mm) P DAF : 11.06" (281 mm) ID: 6.57" (167 mm) : 19.44" (494 mm) P MANN AND HUMMEL C21461 : 6.69" (170 mm) ID: 4.05" (103 mm) : 10.37" (264 mm) Gasket ID: 6.69" (170 mm) P CATERPILLAR : 12.32" (313 mm) ID: 6.99" (178 mm) : 20.07" (510 mm) P CASE H : 8.17" (208 mm) ID: 6.88" (175 mm) : 15.14" (385 mm) P AIR PANEL, VENTILATION MAN Width: 7.09" (180 mm) Depth: 1.57" (40 mm) Height: 15.74" (400 mm) P781740, RADIALSEAL SCANIA : 12.12" (308 mm) ID: 6.90" (176 mm) : 18.29" (464 mm) P KENCHT LX605 : 12.12" (308 mm) ID: 6.91" (176 mm) : 21.44" (544 mm) P781746, OVAL HATZ Width: 6.41" (163 mm) : 9.56" (243 mm) P782104, RADIALSEAL MANN AND HUMMELL C23610 : 8.66" (220 mm) ID: 5.03" (128 mm) : 15.90" (404 mm) Page 281

284 P782105, RADIALSEAL MANN & HUMMEL C25710, MF M1 : 9.44" (240 mm) ID: 5.78" (147 mm) : 21.22" (539 mm) P782106, RADIALSEAL ATLAS COPCO : 11.73" (298 mm) ID: 8.07" (205 mm) : 23.38" (594 mm) P AIR SAFETY, RADIALSEAL BOMAG : 4.60" (117 mm) ID: 4.48" (114 mm) : 15.19" (386 mm) P782396, RADIALSEAL VOLVO : 13.09" (332 mm) ID: 8.66" (220 mm) : 15.57" (396 mm) P782596, RADIALSEAL M.A.N : 9.68" (246 mm) ID: 4.92" (125 mm) : 15.07" (383 mm) P AIR PANEL, VENTILATION VOLVO Width: 8.26" (210 mm) Depth: 1.57" (40 mm) Height: 8.26" (210 mm) P AIR SAFETY, RADIALSEAL ATLAS COPCO : 7.75" (197 mm) ID: 7.59" (193 mm) : 22.51" (572 mm) P AIR SAFETY, RADIALSEAL ATLAS COPCO : 7.75" (197 mm) ID: 7.59" (193 mm) : 22.51" (572 mm) P RENAULT V.I : 9.68" (246 mm) ID: 5.09" (129 mm) : 14.68" (373 mm) P AIR PANEL CASE IH Width: 7.95" (202 mm) Depth: 2.18" (55 mm) Height: 31.41" (798 mm) P DYNAPAC : 5.03" (128 mm) ID: 3.18" (81 mm) : 9.37" (238 mm) P AIR SAFETY, RADIALSEAL DYNAPAC : 3.32" (84 mm) ID: 2.54" (65 mm) : 8.89" (226 mm) P782328, RADIALSEAL DAF , : 9.68" (246 mm) ID: 4.92" (125 mm) : 16.50" (419 mm) P AFTERMARKET VERSION OF FLEETGUARD AF25631 : 11.96" (304 mm) ID: 5.83" (148 mm) : 15.98" (406 mm) P : 4.16" (106 mm) ID: 2.39" (61 mm) : 8.80" (224 mm) P VALTRA TRACTOR : 6.50" (165 mm) ID: 3.43" (87 mm) : 14.61" (371 mm) P AM VERSION OF M&H C25860/1 : 9.72" (247 mm) ID: 5.47" (139 mm) : 15.43" (392 mm) Overall : 16.34" (415 mm) P AM VERSION OF M&H C25660 : 9.72" (247 mm) ID: 5.90" (150 mm) : 12.24" (311 mm) P AIR OIL SEPARATOR MANN & HUMMEL LB : 5.51" (140 mm) Thread Size: M39 x 1.5 : 12.00" (305 mm) P M&H C : 10.51" (267 mm) ID: 6.69" (170 mm) : 19.17" (487 mm) Page 282

285 P AIR SAFETY M.A.N : 6.12" (156 mm) ID: 5.39" (137 mm) : 16.37" (416 mm) P782998, RADIALSEAL MANN and M&H C25978 : 9.68" (246 mm) ID: 7.91" (201 mm) : 19.72" (501 mm) P783117, RADIALSEAL EVOBUS : 7.33" (186 mm) ID: 4.16" (106 mm) : 13.70" (348 mm) P Fendt H : 11.09" (282 mm) ID: 5.82" (148 mm) : 17.66" (448 mm) P AIR SAFETY, RADIALSEAL : 5.94" (151 mm) ID: 4.33" (110 mm) : 17.11" (434 mm) P783403, RADIALSEAL : 5.53" (141 mm) ID: 3.19" (81 mm) ID: 12.99" (330 mm) P AIR SAFETY, RADIALSEAL : 5.30" (135 mm) ID: 3.70" (94 mm) ID: 12.97" (330 mm) P783138, RADIALSEAL : 9.33" (237 mm) ID: 5.15" (131 mm) : 13.50" (343 mm) P AIR OIL SEPARATOR MANN & HUMMEL LB13742 : 5.51" (140 mm) Thread Size: M39 x 1.5 : 6.97" (177 mm) P AIR PANEL, ENGINE aftermarket version of Mercedes Benz (or Virgis PF15690); Width: 6.77" (172 mm) Depth: 1.98" (50 mm) Height: 23.50" (597 mm) P AIR PANEL, ENGINE aftermarket version of Mercedes Benz (or Virgis PF15693) Width: 6.77" (172 mm) Depth: 2.76" (70 mm) Height: 23.50" (597 mm) P TEREX : 14.28" (363 mm) ID: 7.20" (183 mm) : 20.24" (514 mm) P AIR SAFETY TEREX : 9.09" (231 mm) ID: 6.94" (176 mm) : 20.23" (514 mm) P Massey Ferguson M1 Tractor 2640 / 2675 / 2705 / 3505 / 3525 / 3545 : 8.31" (211 mm) ID: 5.30" (135 mm) : 12.28" (312 mm) P AIR SAFETY : 6.34" (161 mm) ID: 4.65" (118 mm) : 5.14" (130 mm) Flange Diameter: 9.39" (238 mm) P783500, RADIALSEAL John Deere 6000 and 7200 series : 7.28" (185 mm) ID: 3.60" (91 mm) : 12.34" (314 mm) P AIR SAFETY, RADIALSEAL John Deere 6000 series : 5.04" (128 mm) ID: 3.62" (92 mm) : 5.22" (132 mm) P : 11.09" (282 mm) ID: 5.82" (148 mm) : 12.40" (315 mm) P783554, RADIALSEAL FPG10 SERIES FLAME RETARDANT : 8.18" (208 mm) ID: 4.17" (106 mm) : 16.55" (420 mm) P783648, SPECIAL Atlas Copco : 4.72" (120 mm) Thread Size: M76 x 4 : 23.62" (600 mm) Page 283

286 P AIR PANEL, VENTILATION FENDT GT SERIES Width: 4.29" (109 mm) Depth: 2.16" (55 mm) Height: 23.74" (603 mm) P New Holland tractors : 9.90" (252 mm) ID: 6.04" (154 mm) : 15.53" (395 mm) P783730, RADIALSEAL MANITOU , LIFT TRUCK : 6.48" (164 mm) ID: 3.58" (91 mm) : 13.08" (332 mm) P AIR SAFETY, RADIALSEAL MANITOU , LIFT TRUCK : 3.46" (88 mm) ID: 2.92" (74 mm) : 12.84" (326 mm) P AIR DRYER SPIN ON SCANIA P-R-T SERIES 4 : 5.51" (140 mm) Thread Size: G 1 1/4 : 6.93" (176 mm) P AIR SAFETY VOLVO , : 7.80" (198 mm) ID: 6.54" (166 mm) : 12.80" (325 mm) Gasket : 7.11" (181 mm) Gasket ID: 6.73" (171 mm) P783870, RADIALSEAL DAF LF55 : 8.18" (208 mm) ID: 4.73" (120 mm) : 16.02" (407 mm) P783871, RADIALSEAL DAF LF45 : 8.18" (208 mm) ID: 4.73" (120 mm) : 12.64" (321 mm) P AIR PANEL Mercedes Benz Sprinter Series Width: 10.35" (263 mm) Depth: 3.15" (80 mm) Height: 11.93" (303 mm) P A/R 900 (B)Litrronic with Deutz BF4m1013E : 6.14" (156 mm) ID: 3.16" (80 mm) : 24.84" (631 mm) P R934 LITRONIC : 6.14" (156 mm) ID: 3.16" (80 mm) : 20.51" (521 mm) P MAN Bus (Neoman) nl, NM, NUE serie : 9.76" (248 mm) ID: 5.90" (150 mm) : 15.43" (392 mm) P784269, FINNED Donaldson branded version of a P : 5.24" (133 mm) ID: 3.32" (84 mm) : 10.87" (276 mm) P Iveco autobus (IRISBUS) EuroClass & EuroRider : 10.52" (267 mm) ID: 6.69" (170 mm) : 19.41" (493 mm) P Daimler Chrysler Actros II : 10.51" (267 mm) ID: 6.69" (170 mm) : 19.41" (493 mm) P Renault Bus FR1, Renault truck C serie : 11.89" (302 mm) ID: 7.52" (191 mm) : 15.91" (404 mm) P AIR PANEL, ENGINE Mercedes Benz Actros I & II Width: 5.28" (134 mm) Depth: 1.46" (37 mm) Height: 14.96" (380 mm) P AIR PANEL, ENGINE Donaldson Branded version of M&H CU 2956 Width: 6.30" (160 mm) Depth: 11.34" (288 mm) Height: 1.18" (30 mm) P DAF MANN C271170/4 SCHUPP SL81236 : 10.52" (267 mm) ID: 6.69" (170 mm) : 17.32" (440 mm) P AIR SAFETY Donaldson Branded version of R : 8.64" (219 mm) ID: 7.06" (179 mm) : 22.16" (563 mm) Page 284

287 P AIR PANEL, VENTILATION New Holland Width: 4.09" (104 mm) Depth: 20.45" (520 mm) Height: 1.93" (49 mm) P Mercedes Benz Evobus Setra S : 3.94" (100 mm) ID: 2.64" (67 mm) : 3.11" (67 mm) P Daf Leyland 45 /55 series : 8.18" (208 mm) ID: 4.73" (120 mm) : 13.66" (347 mm) P Manitou tractor 150/170 ATT; 150 ATS serie 1&2; 165 ATJ; 2000 L Mainreach; BT 420/425; MB21C, MB26C : 5.24" (133 mm) ID: 2.64" (67 mm) : 10.59" (269 mm) P Tatra 815 Buses : 11.90" (302 mm) ID: 7.51" (191 mm) : 18.11" (460 mm) P AIR SAFETY MCFE : 3.38" (86 mm) ID: 2.24" (57 mm) ID: 2.25" (57 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.67" (17 mm) P AGCO FENDT : 11.09" (282 mm) ID: 5.82" (148 mm) : 17.66" (449 mm) P AIR PANEL Mercedes Benz Atego I & II Width: 6.41" (163 mm) Depth: 1.49" (38 mm) Height: 22.79" (579 mm) P785001, RADIALSEAL Man TGL Series : 8.94" (227 mm) ID: 5.12" (130 mm) : 12.00" (305 mm) P785002, RADIALSEAL Man TGL Series : 9.13" (232 mm) ID: 5.91" (150 mm) : 16.34" (415 mm) P AIR PANEL Daf trucks CF65, CF75, 75CF, 85CF Width: 6.65" (169 mm) Depth: 0.92" (23 mm) Height: 17.00" (432 mm) P AIR PANEL IVECO EUROTECH / EUROSTAR / EUROTRAKKER Width: 3.90" (99 mm) Depth: 1.37" (35 mm) Height: 17.31" (440 mm) P785352, RADIALSEAL Iveco Stralis - Trakker : 12.34" (314 mm) ID: 8.52" (216 mm) : 18.15" (461 mm) P785353, RADIALSEAL Daf CF/75CF : 10.51" (267 mm) ID: 6.69" (170 mm) : 16.53" (420 mm) P AIR PANEL Daf CF65, CF 75, CF Width: 6.46" (164 mm) Depth: 1.57" (40 mm) Height: 10.31" (262 mm) P FUEL CARTRIDGE PRIMARY Man TGL Series : 3.74" (95 mm) ID: 1.81" (46 mm) : 6.79" (173 mm) P AIR SAFETY Hitachi excavators : 3.88" (99 mm) ID: 3.15" (80 mm) : 11.22" (285 mm) P Scania : 11.96" (304 mm) ID: 6.64" (169 mm) : 17.67" (449 mm) P Scania : 11.96" (304 mm) ID: 6.64" (169 mm) : 20.82" (529 mm) P Scania Trucks serie T, R, P and 4 : 11.92" (303 mm) ID: 6.91" (176 mm) : 18.25" (464 mm) P Renault : 12.32" (313 mm) ID: 7.93" (202 mm) : 18.28" (464 mm) Page 285

288 P Renault : 12.32" (313 mm) ID: 6.99" (178 mm) : 21.94" (557 mm) P Mercedes Benz Actros II & Axor I & Axor II : 20.49" (521 mm) ID: 8.73" (222 mm) : 13.08" (332 mm) P785830, RADIALSEAL Flame retardant version of P : 11.96" (304 mm) ID: 6.64" (169 mm) : 19.05" (484 mm) P812559, RADIALSEAL : 12.31" (313 mm) ID: 6.99" (178 mm) : 20.68" (525 mm) P KOBELCO 2451U3373 : 12.00" (305 mm) ID: 6.10" (155 mm) : 4.75" (121 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 4.72" (120 mm) P KOMATSU 3EE : 7.36" (187 mm) ID: 4.78" (121 mm) : 10.81" (275 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P814723, FINNED KOMATSU FORKLIFT 3EA : 4.09" (104 mm) ID: 2.48" (63 mm) : 10.00" (254 mm) Gasket ID: 5.91" (150 mm) Minor : 0.66" (17 mm) P814749, FINNED FENDT F , KOMATSU, Z : 5.25" (133 mm) ID: 2.62" (67 mm) : 11.00" (279 mm) Gasket : 0.66" (17 mm) Gasket ID: 4.09" (104 mm) Minor : 0.66" (17 mm) P EXMAN 810N : 6.37" (161 mm) ID: 3.54" (90 mm) : 9.99" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) P815288, FINNED DONALDSON FHG AIR CLEANER G : 6.09" (155 mm) ID: 3.47" (88 mm) : 15.00" (381 mm) Gasket ID: 8.66" (220 mm) Minor : 0.66" (17 mm) P AIR SAFETY : 5.70" (145 mm) ID: 4.72" (120 mm) : 16.14" (410 mm) P AIR SAFETY JCB KTH0552 : 7.28" (185 mm) ID: 6.37" (162 mm) : 17.99" (457 mm) P821575, RADIALSEAL DONALDSON FPG05" AIR CLEANERS : 4.16" (106 mm) ID: 2.36" (60 mm) : 10.43" (265 mm) P821883, RADIALSEAL HITACHI : 8.18" (208 mm) ID: 4.82" (123 mm) : 14.06" (357 mm) P AIR SAFETY, RADIALSEAL HITACHI : 4.95" (126 mm) ID: 4.10" (104 mm) : 13.78" (350 mm) P821938, RADIALSEAL HITACHI : 9.33" (237 mm) ID: 5.15" (131 mm) : 14.06" (357 mm) P AIR SAFETY, RADIALSEAL HITACHI : 4.77" (121 mm) ID: 4.43" (113 mm) : 13.65" (347 mm) P822686, RADIALSEAL DONALDSON FPG04 AIR CLEANERS : 3.54" (90 mm) ID: 1.77" (45 mm) : 7.05" (179 mm) Page 286

289 P822768, RADIALSEAL DONALDSON FPG06 A/C : 5.08" (129 mm) ID: 3.20" (81 mm) : 11.97" (304 mm) P AIR SAFETY, RADIALSEAL DONALDSON FPG06 A/C : 3.32" (84 mm) ID: 2.55" (65 mm) : 11.74" (298 mm) : 3.10" (79 mm) P AIR SAFETY, RADIALSEAL DONALDSON FPG05 AIR CLEANERS : 2.44" (62 mm) ID: 1.77" (45 mm) : 10.23" (260 mm) : 2.32" (59 mm) P FURUKAWA : 7.93" (201 mm) ID: 3.56" (90 mm) : 19.77" (502 mm) P827653, RADIALSEAL DONALDSON FPG07 AIR CLEANERS : 5.44" (138 mm) ID: 3.19" (81 mm) : 12.67" (322 mm) P827655, RADIALSEAL TOYOTA , : 5.44" (138 mm) ID: 3.20" (81 mm) : 10.71" (272 mm) P828633, RADIALSEAL ISUZU : 9.33" (237 mm) ID: 5.15" (131 mm) : 10.91" (277 mm) P828889, RADIALSEAL DONALDSON FPG08 AIR CLEANERS : 6.48" (164 mm) ID: 3.58" (91 mm) : 13.66" (347 mm) P AIR SAFETY, RADIALSEAL DONALDSON FPG07 AIR CLEANERS : 3.32" (84 mm) ID: 2.55" (65 mm) : 12.38" (314 mm) P AIR SAFETY, RADIALSEAL DONALDSON FPG08 AIR CLEANERS : 3.72" (95 mm) ID: 2.92" (74 mm) : 13.37" (340 mm) P829964, RADIALSEAL TOYOTA 17743U : 5.44" (138 mm) ID: 3.20" (81 mm) : 10.71" (272 mm) P Hino : 6.40" (163 mm) ID: 5.39" (137 mm) : 12.00" (305 mm) P AIR SAFETY, RADIALSEAL TOYOTA, DONALDSON FPG07 A/C : 3.10" (79 mm) ID: 2.55" (65 mm) : 10.42" (265 mm) : 3.32" (84 mm) P831424, RADIALSEAL DONALDSON FPG05 AIR CLEANER : 4.16" (106 mm) ID: 2.36" (60 mm) : 10.43" (265 mm) P831520, RADIALSEAL DONALDSON FPG04 AIR CLEANER P832150, RADIALSEAL HINO : 9.33" (237 mm) ID: 5.15" (131 mm) : 13.15" (334 mm) P832170, RADIALSEAL : 8.10" (206 mm) ID: 4.82" (122 mm) : 13.56" (344 mm) P AIR SAFETY, RADIALSEAL Can Be Used With P & P : 5.30" (135 mm) ID: 4.48" (114 mm) : 15.50" (394 mm) P AIR SAFETY, RADIALSEAL HINO, DONALDSON FPG11 AIR CLEANERS : 5.30" (135 mm) ID: 4.48" (114 mm) : 13.15" (334 mm) Page 287

290 P AIR SAFETY, RADIALSEAL Hino : 4.96" (126 mm) ID: 4.48" (114 mm) : 12.87" (327 mm) P AIR SAFETY, RADIALSEAL FPG05 UL : 2.44" (62 mm) ID: 1.77" (45 mm) : 10.23" (260 mm) P NAVISTAR R1 : 5.16" (131 mm) ID: 3.55" (90 mm) : 10.88" (276 mm) P AIR PANEL, VENTILATION AUSTOFT SUGAR CANE HARVESTORS Width: 6.50" (165 mm) Depth: 2.19" (56 mm) Height: 12.12" (308 mm) P : 13.80" (351 mm) ID: 9.50" (241 mm) : 14.19" (360 mm) P AIR SAFETY FORD D2AF9601AA : 3.39" (86 mm) ID: 9.50" (241 mm) : 2.30" (58 mm) P : 5.20" (132 mm) ID: 2.99" (76 mm) : 10.65" (271 mm) P902282, SPECIAL FLAME RETARDENT VERSION OF P : 7.90" (201 mm) ID: 3.60" (92 mm) Height: 10.00" (254 mm) P Flame Retardant Version of P : 8.62" (219 mm) ID: 4.29" (109 mm) : 5.67" (144 mm) P902309, FINNED HYUNDAI 11EM : 7.91" (201 mm) ID: 5.31" (135 mm) : 19.37" (492 mm) P902321, RADIALSEAL Hino : 9.24" (235 mm) ID: 5.58" (131 mm) : 9.95" (253 mm) P Hino : 9.13" (232 mm) Height: 16.30" (414 mm) P AIR SAFETY Hino : 4.33" (110 mm) Height: 16.50" (420 mm) P FUEL/WATER SEPARATOR ACCY ELECTRONIC WATER LEVEL SERVICE INDICATOR P FUEL/WATER SEPARATOR ACCY MOUNTING HEAD/BRACKET P FUEL/WATER SEPARATOR SPIN-ON 3 GPM HIGH PERF FF/WS : 4.38" (111 mm) Thread Size: 1 1/4-12 : 11.75" (298 mm) Efficiency 99%: 15 Micron P FUEL/WATER SEPARATOR SPIN-ON 1 GPM HIGH PERF FF/WS : 4.38" (111 mm) Thread Size: 1-1/4"-12 : 7.44" (189 mm) Efficiency 99%: 15 Micron R HITACHI EXCAVATOR : 7.36" (187 mm) ID: 4.78" (121 mm) : 15.00" (381 mm) Bolt Hole Diameter: 0.66" (17 mm) Gasket ID: 6.38" (162 mm) R AIR SAFETY KOMATSU 3EB : 3.13" (80 mm) ID: 2.15" (55 mm) : 10.00" (254 mm) Bolt Hole Diameter: 0.66" (17 mm) R AIR SAFETY ISUZU : 8.71" (221 mm) ID: 5.35" (136 mm) : 13.02" (331 mm) S028218, SPECIAL KOMATSU : 3.18" (81 mm) Height: 2.59" (66 mm) : 1.85" (47 mm) Page 288

291 X GASKET KIT GASKET KIT, ST 14" TUBE/PERIPHERAL A/C X GASKET KIT GASKET KIT, ST 16" TUBE/PERIPHERAL A/C X COOLANT ADDITIVE 1 PINT / 16 OZ SCA FORMULA X COOLANT ADDITIVE 5-GALLON PAIL SCA FORMULA X COOLANT ADDITIVE 5 GAL SCA+ FORMULA X COOLANT ADDITIVE 55 GAL SCA+ FORMULA X OIL ANALYSIS KIT BASIC SPECTROCHEMICAL OIL ANALYSIS X OIL ANALYSIS KIT INDUSTRIAL HYDRAULIC PACKAGE X COOLANT ADDITIVE 55-GALLON DRUM SCA FORMULA X AIR FILTER KIT THERMOKING X COOLANT ADDITIVE 1 QUART/32 OZ. SCA FORMULA X COOLANT TEST STRIPS 3-Way Coolant Test Strips (12 per pack) X COOLANT ADDITIVE 2 QUART/64 OZ. SCA FORMULA X COOLANT ADDITIVE 1 GALLON/128 OZ. SCA FORMULA X COOLANT ADDITIVE 1 PINT SCA+ FORMULA X COOLANT ADDITIVE 1/2 GAL SCA+FORMULA Page 289

292 Notes 290

293 Products by Filter Type (shape) and Dimension When the filter in front of you is void of any part numbers or markings, this section of the catalog will help. Find the closed product type from the list on the right. Each product group is sorted by three key dimensional attributes. When you find the one that best matches what s in front of you, go to the part number section to confirm the filter with additional attributes, primary application or by the picture. If Staying Current is Important to You, Consider Using Our On-line Tools On-line Attribute Search The attribute search on our public web site gives you the ability to search for up to four attributes for more flexible and customized search. On-line Product Details / Specifications Type in a Donaldson part number in the search window on our public web site. Your results screen will return choices from various countries and results from ecatalogs or literature. The image on the left is an example of details available on ecatalogs for a Donaldson Duramax spinon filter. Product Specifications - By Type & Dimension Especificaciones des los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Productangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Filter Product Types Air Breathers Air Cone-shaped Air Disposable Air Dryers Air DuraLites Air Ovals Air Panels Air PowerCore Filters Air Rounds Air Specials Air Vee-Pac Air/Oil Separators Coolant Filters Fuel Box Fuel Cartridge Fuel In-line Fuel Spin-on Hydraulic Cartridge Hydraulic In-line Hydraulic Spin-on Lube Cartridge Lube Spin-on Oil Coalescing Seals, Gaskets, Washers. 334 Transmission See separate sections for Donaldson: filter maintenance kits or head assemblies and filters Products by Type & Dimension Product Guide by Part Number Filter Maintenance Kits Liquid Filtration Heads & Filters 291

294 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Specs By Part Type Air Breathers Height Depth P606289, SPECIAL P537369, SPECIAL P173330, CYLINDRICAL ID P172434, CYLINDRICAL Thread Size G 3/ P761050, CYLINDRICAL Thread Size ID M18 x P M18 x P Height P606761, SPECIAL ID P FILLER ASSY P Height Depth P536431, SPECIAL ID P524388, CYLINDRICAL Thread Size ID G 1/ P G 1/ P ID P526413, CYLINDRICAL P524392, CYLINDRICAL P606944, CYLINDRICAL Height S028218, SPECIAL ID P528234, CYLINDRICAL P528708, SPECIAL Thread Size / P564424, SPIN ON /4 NPT P564425, SPIN ON / P528211, SPIN ON / P606277, SPIN ON / P539468, SPIN ON Air Breathers - continued Depth Height P606945, SPECIAL ID P Width P607298, SPECIAL ID P606059, CYLINDRICAL Thread Size ID G P Thread Size NPT P ID P607276, CYLINDRICAL P607673, CYLINDRICAL P603746, CYLINDRICAL Thread Size ID P Depth P606299, SPECIAL ID P603568, CYLINDRICAL Air Cone-shaped ID P AIR SAFETY, KONEPAC P137285, KONEPAC P611858, KONEPAC P604457, KONEPAC P609218, KONEPAC P611859, KONEPAC P AIR SAFETY, KONEPAC P770397, KONEPAC P137293, KONEPAC P AIR SAFETY, KONEPAC P609221, KONEPAC P776158, KONEPAC P775945, KONEPAC P776159, KONEPAC P771003, KONEPAC P150693, KONEPAC P130959, KONEPAC P136646, KONEPAC P138428, KONEPAC Page 292

295 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Cone-shaped - continued Air Disposable - continued ID P141339, KONEPAC P129472, KONEPAC P140822, KONEPAC P148044, KONEPAC P150692, KONEPAC P776765, KONEPAC P611539, KONEPAC EAF5097, ULTRA-WEB KONEPAC P141317, KONEPAC P154575, KONEPAC EAF5029, ULTRA-WEB KONEPAC P129396, KONEPAC P148043, KONEPAC P150694, KONEPAC P151097, KONEPAC P522293, KONEPAC EAF5055, ULTRA-WEB KONEPAC P155842, KONEPAC EAF5053, ULTRA-WEB KONEPAC P153551, KONEPAC P537791, KONEPAC P150695, KONEPAC EAF5047, ULTRA-WEB KONEPAC P776157, KONEPAC P521598, KONEPAC P608116, KONEPAC P602344, KONEPAC P142100, KONEPAC P530866, KONEPAC P141228, KONEPAC Air Disposable Body Diameter P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE Body Diameter Inlet Diameter P AIR CLEANER, DISPOSABLE Body Diameter P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE Body Diameter Inlet Diameter P AIR CLEANER, DISPOSABLE Body Diameter P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE P AIR CLEANER, DISPOSABLE Air Dryers Thread Size G 1 1/ P AIR DRYER SPIN ON M39 x P AIR DRYER SPIN ON Air DuraLites ID C045001, DURALITE D045003, DURALITE D045004, DURALITE C045002, DURALITE C055003, DURALITE C055002, DURALITE D055004, DURALITE C065002, DURALITE C065001, DURALITE D065003, DURALITE C065015, DURALITE D065008, DURALITE C065003, DURALITE B085056, DURALITE C085005, DURALITE C085002, DURALITE C085006, DURALITE C085001, DURALITE C085043, DURALITE C085003, DURALITE C085004, DURALITE C085041, DURALITE B085001, DURALITE B085048, DURALITE C085061, DURALITE B085011, DURALITE B085046, DURALITE B085008, DURALITE C105003, DURALITE C105028, DURALITE B105006, DURALITE B105020, DURALITE C105004, DURALITE C105017, DURALITE B105002, DURALITE B120439, DURALITE B120473, DURALITE C125020, DURALITE Specs By Part Type Page 293

296 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air DuraLites - continued Air Panels - continued Specs By Part Type ID B125011, DURALITE C125004, DURALITE C125017, DURALITE B125003, DURALITE B125005, DURALITE B120376, DURALITE Air Ovals Width Height P607273, OVAL P606071, OVAL P AIR SAFETY, OVAL P AIR SAFETY, OVAL P606079, OVAL P606947, OVAL P606075, OVAL P536434, OVAL P781746, OVAL Width Depth P607225, OVAL Width Height P AIR SAFETY, OVAL P606502, OVAL P606073, OVAL Width Depth P606069, OVAL Width Height P607310, OVAL P606070, OVAL P AIR SAFETY, OVAL P606295, OVAL P607320, OVAL P500070, OVAL Air Panels Width Depth Height P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION Width Depth Height P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION Page 294

297 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Panels - continued Air Panels - continued Width Depth Height P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE Height Width Depth P AIR PANEL, VENTILATION Width Depth Height P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, ENGINE Height Width Depth P AIR PANEL Width Depth Height P AIR PANEL, VENTILATION P AIR PANEL, ENGINE Width Height P AIR PANEL, VENTILATION Height Width Depth P AIR PANEL P AIR PANEL, VENTILATION Width Depth Height P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, SPECIAL P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION Specs By Part Type Page 295

298 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Panels - continued Air PowerCore Filters - continued Specs By Part Type Width Depth Height P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION P AIR PANEL P AIR PANEL, VENTILATION P AIR PANEL, ENGINE P AIR PANEL, VENTILATION P AIR PANEL, VENTILATION Air PowerCore Filters Height Width P604273, POWERCORE P611720, POWERCORE P608766, POWERCORE P609086, POWERCORE P608533, POWERCORE P606119, POWERCORE Height Width P608665, POWERCORE P608666, POWERCORE P606122, POWERCORE P613522, POWERCORE P610875, POWERCORE Height Width P608667, POWERCORE P616056, POWERCORE P603577, POWERCORE P608676, POWERCORE P606120, POWERCORE P608675, POWERCORE P607960, POWERCORE P607955, POWERCORE Height Width P608677, POWERCORE P607965, POWERCORE P605960, POWERCORE Air Rounds ID P AIR SAFETY, RADIALSEAL P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY Page 296

299 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued ID P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SECONDARY P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P R AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P102745, FINNED P121240, FINNED P148970, FINNED P P123065, FINNED P526801, FINNED P148113, FINNED P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P AIR SAFETY ID P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P P822686, RADIALSEAL P AIR SAFETY, RADIALSEAL close d close d P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P771531, FINNED P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY, RADIALSEAL P P AIR SAFETY P AIR SAFETY P AIR SAFETY P P777578, RADIALSEAL P P AIR SAFETY P AIR SAFETY P P P108736, FINNED P122510, FINNED P148969, FINNED P181050, FINNED P182050, FINNED P181072, FINNED P182072, FINNED E500667, FINNED P533597, FINNED P P P P P814723, FINNED P AIR SECONDARY P535337, FINNED P775749, FINNED P776356, FINNED P P Specs By Part Type Page 297

300 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued Specs By Part Type ID P P AIR SAFETY P AIR SAFETY P AIR SECONDARY P AIR SAFETY, RADIALSEAL P772578, RADIALSEAL P775631, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P P821575, RADIALSEAL P831424, RADIALSEAL P600043, RADIALSEAL P P AIR SAFETY P AIR SAFETY P P P P P P607345, FINNED P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P P AIR SECONDARY P AIR SAFETY P AIR SAFETY P P P P P P P P AIR SAFETY P P P P P AIR SECONDARY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY ID P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P P AIR SAFETY, RADIALSEAL P P AIR SAFETY, RADIALSEAL P P P P P AIR SAFETY, RADIALSEAL P532410, RADIALSEAL P822768, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P P P P P AIR SECONDARY P AIR SAFETY P P P119135, FINNED P776636, FINNED P P P P P P771547, FINNED P P P P776360, FINNED P776358, FINNED P776730, FINNED P P Page 298

301 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued ID P P P776615, FINNED P784269, FINNED P P P AIR SAFETY P814749, FINNED P P P136258, FINNED P122514, FINNED P123159, FINNED P148966, FINNED P181052, FINNED P182052, FINNED P131359, FINNED P606948, FINNED P148932, FINNED P P130760, FINNED P130761, FINNED P P148586, FINNED P181062, FINNED P182062, FINNED P AIR SAFETY P AIR SAFETY P P P549271, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P P P P AIR SAFETY P P AIR SAFETY P P P P P ID P P P P827653, RADIALSEAL P610903, RADIALSEAL P610905, RADIALSEAL P827655, RADIALSEAL P829964, RADIALSEAL P535770, RADIALSEAL P600501, RADIALSEAL P536940, RADIALSEAL P P P P P P P P772579, RADIALSEAL P783403, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SECONDARY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P P P P P P P P P P P P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY Specs By Part Type Page 299

302 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued Specs By Part Type ID P P AIR SAFETY P AIR SAFETY P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SECONDARY P P AIR SAFETY P AIR SAFETY P P P P P P P P P546566, FINNED P P P181093, FINNED P541857, FINNED P P148968, FINNED P181054, FINNED P182054, FINNED P P P148573, FINNED P181059, FINNED P182059, FINNED P P P P P P P815288, FINNED P122492, FINNED P127784, FINNED P771548, FINNED P772550, FINNED P P P P P ID EAF5141, ULTRA-WEB P P P P P P776830, FINNED P P P P P P773605, FINNED P P771550, FINNED P P P P601437, RADIALSEAL P AIR SAFETY P AIR SAFETY P778507, RADIALSEAL P778509, RADIALSEAL P P P AIR SAFETY P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P P P606067, FINNED P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P AIR ROUND, VENTILATION P P P P P P609447, RADIALSEAL P606803, RADIALSEAL Page 300

303 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued ID P606804, RADIALSEAL P604996, RADIALSEAL P P783730, RADIALSEAL P828889, RADIALSEAL P536733, RADIALSEAL P P P772580, RADIALSEAL P P P P P P P P P P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P P526840, FINNED P P P P P P P P131331, FINNED P AIR SAFETY P P182063, FINNED P533233, FINNED P P AIR SAFETY P P AIR SAFETY P P P P P130763, FINNED P P132935, FINNED P181063, FINNED P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P P P P AIR SAFETY ID P AIR SAFETY P601280, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P P P P P P P P P P P P P AIR SAFETY, RADIALSEAL P P P AIR SAFETY P536732, RADIALSEAL P P783500, RADIALSEAL P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY, RADIALSEAL P P P P P P P P P783117, RADIALSEAL P AIR SAFETY P780522, RADIALSEAL Specs By Part Type Page 301

304 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued Specs By Part Type ID P P P R P P AIR SAFETY P AIR SAFETY P P AIR SECONDARY P P AIR SAFETY P537729, RADIALSEAL P P P P P P P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P AIR SAFETY P P P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P P P P614563, RADIALSEAL P P P AIR SAFETY P AIR SAFETY P P AIR SAFETY, RADIALSEAL P P902309, FINNED P771555, FINNED P P772555, FINNED P P117624, FINNED P ID P182045, FINNED P101038, FINNED P104445, FINNED P AIR SAFETY P P P181045, FINNED P P P P P P P181064, FINNED P182064, FINNED P P P P P P771511, FINNED P775732, FINNED P777588, RADIALSEAL P P P P P532703, RADIALSEAL P P P P832170, RADIALSEAL P P P P P P777592, RADIALSEAL P533109, RADIALSEAL P533651, RADIALSEAL P P778638, RADIALSEAL P547331, RADIALSEAL P601790, RADIALSEAL P781039, RADIALSEAL P783554, RADIALSEAL P783871, RADIALSEAL P P783870, RADIALSEAL P821883, RADIALSEAL P777638, RADIALSEAL P P AIR SAFETY P AIR SAFETY P AIR SAFETY Page 302

305 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued ID P P P AIR SAFETY P P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P P P P P P P P P P P P P P P AIR SAFETY P P AIR SAFETY P AIR SAFETY P AIR SAFETY P P P P P P P P EAF5110, ULTRA-WEB P P P AIR SAFETY P AIR SAFETY P AIR SAFETY P AIR SAFETY P P AIR SAFETY P782104, RADIALSEAL EAF5074, ULTRA-WEB EAF5025, ULTRA-WEB P P AIR SAFETY P P AIR SAFETY P R AIR SAFETY ID P P P P P P P P P P P P EAF5194, ULTRA-WEB P P close d close d P P P P P P P P P785001, RADIALSEAL P P P AIR SECONDARY P P P P P P AIR SAFETY, RADIALSEAL P AIR SAFETY P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P785002, RADIALSEAL P P P P P P P P P P P P P P P181024, FINNED P118343, FINNED Specs By Part Type Page 303

306 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued Specs By Part Type ID P181035, FINNED P182035, FINNED P P EAF5034, ULTRA-WEB P P130770, FINNED P P P P P P P P P P P P P532499, RADIALSEAL P601767, RADIALSEAL EAF5035, ULTRA-WEB P127914, FINNED P P P P P P P P902321, RADIALSEAL P P AIR SECONDARY P543614, RADIALSEAL P828633, RADIALSEAL EAF5067, ULTRA-WEB P527484, RADIALSEAL P530300, RADIALSEAL P P536457, RADIALSEAL P832150, RADIALSEAL P783138, RADIALSEAL P821938, RADIALSEAL EAF5066, ULTRA-WEB P526678, RADIALSEAL P533654, RADIALSEAL P536036, RADIALSEAL P611856, RADIALSEAL P778905, RADIALSEAL EAF5105, ULTRA-WEB P P538392, RADIALSEAL EAF5147, ULTRA-WEB RADIALSEAL EAF5106, ULTRA-WEB RADIALSEAL ID P534096, RADIALSEAL EAF5108, ULTRA-WEB RADIALSEAL EAF5114, ULTRA-WEB RADIALSEAL P600676, RADIALSEAL P AIR SAFETY P P P782105, RADIALSEAL P AIR SAFETY P P P EAF5048, ULTRA-WEB P P P P P P P P P P P P EAF5148, ULTRA-WEB RADIALSEAL P544741, RADIALSEAL P539765, RADIALSEAL P537355, RADIALSEAL P P P P P782596, RADIALSEAL P782328, RADIALSEAL P P782998, RADIALSEAL P P P P P P P P P P P P AIR SAFETY P P P AIR SAFETY P Page 304

307 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued ID P607264, FINNED P AIR SAFETY P P AIR SAFETY P P P P P AIR SAFETY P P P P P AIR SAFETY P P P P P P P P P P P P P P P P P P P P P EAF5044, ULTRA-WEB P P P EAF5014, ULTRA-WEB P P P P EAF5028, ULTRA-WEB P P P P P P P P EAF5007, ULTRA-WEB P ID P EAF5016, ULTRA-WEB P P P EAF5024, ULTRA-WEB EAF5061, ULTRA-WEB P P P P P P P P P785353, RADIALSEAL P P P P P P P P P P P P P P P P P AIR SAFETY P P P P P P P AIR SAFETY P P P P P P P P P P P780910, RADIALSEAL P P P536448, RADIALSEAL P532501, RADIALSEAL Specs By Part Type Page 305

308 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued Specs By Part Type ID P533930, RADIALSEAL P532503, RADIALSEAL P537778, RADIALSEAL P P533655, RADIALSEAL P P P537876, RADIALSEAL P P780331, RADIALSEAL EAF5000, ULTRA-WEB P122529, FINNED P534438, RADIALSEAL P P127915, FINNED P P P181000, FINNED P182000, FINNED P P P181077, FINNED EAF5046, ULTRA-WEB P P181023, FINNED P P P P P536577, RADIALSEAL P549644, RADIALSEAL EAF5100, ULTRA-WEB EAF5149, ULTRA-WEB RADIALSEAL P EAF5107, ULTRA-WEB RADIALSEAL P534436, RADIALSEAL P777409, RADIALSEAL P P P P544950, RADIALSEAL P542753, RADIALSEAL P534816, RADIALSEAL EAF5109, ULTRA-WEB RADIALSEAL P P532473, RADIALSEAL P P P P P AIR SAFETY, RADIALSEAL P AIR SAFETY, RADIALSEAL P ID P P EAF5187, ULTRA-WEB EAF5188, ULTRA-WEB P P P782106, RADIALSEAL P P P P P AIR SAFETY P P P P P P P P P P P P P P778924, RADIALSEAL P P P785830, RADIALSEAL P P778335, RADIALSEAL P P778336, RADIALSEAL P P P P P P777579, RADIALSEAL P P P P P P122605, FINNED P549523, RADIALSEAL P P P P P181013, FINNED P EAF5001, ULTRA-WEB EAF5096, ULTRA-WEB EAF5056, ULTRA-WEB Page 306

309 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued ID P P P P EAF5015, ULTRA-WEB P P185002, ULTRA-WEB P P P P P P P P AIR SAFETY P P P P P181001, FINNED P P182001, FINNED P P P P EAF5041, ULTRA-WEB P P P P P P P P EAF5002, ULTRA-WEB P P P P181079, FINNED P P P EAF5092, ULTRA-WEB P EAF5043, ULTRA-WEB P P P P P P P P P ID P781740, RADIALSEAL P P EAF5116, ULTRA-WEB P777868, RADIALSEAL P812559, RADIALSEAL P P P P777871, RADIALSEAL P P780621, RADIALSEAL P P608885, RADIALSEAL P778674, RADIALSEAL P785352, RADIALSEAL P P P P532507, RADIALSEAL P536527, RADIALSEAL P532505, RADIALSEAL P532509, RADIALSEAL P P P P P P P EAF5151, ULTRA-WEB RADIALSEAL EAF5150, ULTRA-WEB RADIALSEAL EAF5101, ULTRA-WEB P P P P P P P P P EAF5057, ULTRA-WEB P P P P EAF5008, ULTRA-WEB P P P EAF5049, ULTRA-WEB EAF5102, ULTRA-WEB P Specs By Part Type Page 307

310 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued Air Rounds - continued Specs By Part Type ID P P P EAF5027, ULTRA-WEB EAF5026, ULTRA-WEB P P P544301, RADIALSEAL P P P AIR SAFETY P AIR SAFETY P P P P P P P P P EAF5104, ULTRA-WEB P544243, RADIALSEAL P534925, RADIALSEAL P527682, RADIALSEAL P605022, RADIALSEAL P603755, RADIALSEAL EAF5069, ULTRA-WEB P185069, ULTRA-WEB P P P533814, RADIALSEAL P533235, RADIALSEAL P548900, RADIALSEAL P612469, RADIALSEAL EAF5098, ULTRA-WEB RADIALSEAL P540388, RADIALSEAL P P782396, RADIALSEAL P P606220, RADIALSEAL EAF5135, ULTRA-WEB RADIALSEAL P533938, RADIALSEAL P P EAF5142, ULTRA-WEB P P P P P P P181066, FINNED P ID P P P P P P P EAF5039, ULTRA-WEB P P P P P P AIR SAFETY P P P EAF5189, ULTRA-WEB EAF5099, ULTRA-WEB P P P181060, FINNED P P P P EAF5095, ULTRA-WEB P P P181053, FINNED P P P P P P P P P P P P P P538007, RADIALSEAL P533882, RADIALSEAL P781398, RADIALSEAL P781098, RADIALSEAL P P P EAF5042, ULTRA-WEB P P P EAF5065, ULTRA-WEB Page 308

311 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air Rounds - continued ID P P P P P P P P P EAF5040, ULTRA-WEB P P EAF5038, ULTRA-WEB P EAF5152, ULTRA-WEB RADIALSEAL P608306, RADIALSEAL EAF5153, ULTRA-WEB RADIALSEAL P609519, RADIALSEAL P AIR SAFETY, RADIALSEAL P P P P P P Air Specials Depth Thread Size P521688, WRAP M76 x P783648, SPECIAL Width Depth P780164, SPECIAL ID Height P902282, SPECIAL Body Diameter Outlet Diameter P524837, SPECIAL P154927, SPECIAL P524838, SPECIAL Width Depth P521685, WRAP P521686, WRAP Width Depth Height P607314, SPECIAL Air Vee-Pac Width Depth P AIR VEE-PAC P AIR VEE-PAC P AIR VEE-PAC Air/Oil Separators ID P AIR OIL SEPARATOR P AIR OIL SEPARATOR Thread Size M39 x P AIR OIL SEPARATOR M39 x P AIR OIL SEPARATOR ID P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR P AIR OIL SEPARATOR Specs By Part Type Page 309

312 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Air/Oil Separators - continued Fuel Cartridge - continued Specs By Part Type ID P AIR OIL SEPARATOR P AIR OIL SEPARATOR Coolant Filters Thread Size / P COOLANT SPIN-ON / P COOLANT SPIN-ON / ECF4085 COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON M16 x P COOLANT SPIN-ON M16 x P COOLANT SPIN-ON M16 x 1.5-6H ECF4086 COOLANT SPIN-ON M16 x 1.5-6H ECF4089 COOLANT SPIN-ON / ECF4088 COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON M36 x P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON / P COOLANT SPIN-ON M36 x P COOLANT SPIN-ON / P COOLANT SPIN-ON P COOLANT SPIN-ON Fuel Box Width Height P FUEL BOX PRIMARY P FUEL BOX PRIMARY P FUEL/WATER SEPARATOR BOX P FUEL/WATER SEPARATOR BOX P FUEL BOX PRIMARY P FUEL BOX PRIMARY P FUEL BOX PRIMARY P FUEL BOX PRIMARY Fuel Cartridge P FUEL CARTRIDGE SECONDARY ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY G P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY Thread Size / P FUEL CARTRIDGE PRIMARY ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE SOCK P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY Page 310

313 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Fuel Cartridge - continued Fuel Cartridge - continued ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE SOCK P FUEL CARTRIDGE SECONDARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE SOCK P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE SECONDARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY Height P FUEL/WATER SEPARATOR CARTRIDGE ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE SECONDARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE Specs By Part Type Page 311

314 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Fuel Cartridge - continued Fuel In-line - continued Specs By Part Type ID P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE SOCK P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE SECONDARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE P FUEL/WATER SEPARATOR CARTRIDGE P FUEL CARTRIDGE PRIMARY P FUEL CARTRIDGE SOCK P FUEL CARTRIDGE PRIMARY P FUEL/WATER SEPARATOR CARTRIDGE Fuel In-line Inlet Size Overall / P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE P FUEL IN-LINE / P FUEL IN-LINE P FUEL IN-LINE /8 Tube, 10 Tube /8 Tube, 10 Tube P FUEL IN-LINE P FUEL IN-LINE Inlet Size /8 Tube, 10 Tube Overall P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE P FUEL IN-LINE Inlet Size Body / P FUEL IN-LINE Inlet Size Overall / P FUEL IN-LINE / P FUEL IN-LINE /8 x 5/ P FUEL IN-LINE / P FUEL IN-LINE M16 x P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE P FUEL IN-LINE P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE M16 x P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE M14 x P FUEL IN-LINE Height Depth P FUEL IN-LINE Inlet Size Overall / P FUEL IN-LINE M14 x P FUEL IN-LINE M14 x P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE / P FUEL IN-LINE ID P FUEL IN-LINE Inlet Size Overall / P FUEL IN-LINE M14 x P FUEL IN-LINE / P FUEL IN-LINE Fuel Spin-on Thread Size M16 x P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY Page 312

315 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Fuel Spin-on - continued Fuel Spin-on - continued Thread Size M14 x P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON SECONDARY M16 x P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL/WATER SEPARATOR SPIN-ON M18 x P FUEL/WATER SEPARATOR SPIN-ON M20 x P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON PRIMARY M16 x P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON PRIMARY M16 x P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON PRIMARY M16 x P FUEL/WATER SEPARATOR SPIN-ON M14 x P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY M16 x P FUEL/WATER SEPARATOR SPIN-ON M20 x P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY M16 x 1.5-6H P FUEL SPIN-ON PRIMARY M16 x 1.5-6H P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON SECONDARY M16 x P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY M12 x P FUEL SPIN-ON PRIMARY M72 x P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON Thread Size P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON SECONDARY / EFF7917 FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY M24 x P FUEL SPIN-ON PRIMARY M24 x P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON M20 x P FUEL/WATER SEPARATOR SPIN-ON M20 x P FUEL/WATER SEPARATOR SPIN-ON M22 x P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY Specs By Part Type Page 313

316 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Fuel Spin-on - continued Fuel Spin-on - continued Specs By Part Type Thread Size / P FUEL SPIN-ON PRIMARY M18 x P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON / P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON PRIMARY M24 x P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON SECONDARY M16 x P FUEL SPIN-ON PRIMARY M18 x P FUEL SPIN-ON PRIMARY M20 x P FUEL/WATER SEPARATOR SPIN-ON M24 x P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY M14 x P FUEL/WATER SEPARATOR SPIN-ON M16 x P FUEL SPIN-ON PRIMARY M16 x P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY M20 X P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY / P FUEL SPIN-ON PRIMARY Thread Size P FUEL SPIN-ON PRIMARY M30 x P FUEL SPIN-ON SECONDARY P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY EFF9092 FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON M22 x P FUEL SPIN-ON PRIMARY M22 x P FUEL/WATER SEPARATOR SPIN-ON M30 x P FUEL/WATER SEPARATOR SPIN-ON M30 x P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL SPIN-ON PRIMARY P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON / P FUEL/WATER SEPARATOR SPIN-ON /4" P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON P FUEL/WATER SEPARATOR SPIN-ON Page 314

317 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Fuel Spin-on - continued Hydraulic Cartridge - continued Thread Size P FUEL/WATER SEPARATOR SPIN-ON M32 x P FUEL SPIN-ON PRIMARY M105 X P FUEL/WATER SEPARATOR SPIN-ON M85 x P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY / EFF0047 FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON SECONDARY / P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY / P FUEL/WATER SEPARATOR SPIN-ON / P FUEL SPIN-ON PRIMARY M20 x P FUEL SPIN-ON PRIMARY Hydraulic Cartridge ID P P P P P P P P Thread Size /4 NPT P HYDRAULIC STRAINER ID P P P P P P P P P P Thread Size /16-12 UN P HYDRAULIC STRAINER /8-12 UN P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER Thread Size /8-12 UN P HYDRAULIC STRAINER /8-12 UN P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P Thread Size /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /8-12 UN P HYDRAULIC STRAINER /8-12 UN P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P P P P P P P Specs By Part Type Page 315

318 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Specs By Part Type ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P HYDRAULIC STRAINER P HYDRAULIC STRAINER Thread Size /8-18 NPT P HYDRAULIC STRAINER /2-14 NPT P HYDRAULIC STRAINER / P HYDRAULIC STRAINER ID P ID P P P P Thread Size /4 NPT P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P /1 26/ P Thread Size G 3/ P HYDRAULIC STRAINER G 3/ P HYDRAULIC STRAINER Page 316

319 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Thread Size /2-12 UN P HYDRAULIC STRAINER /2-12 UN P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P ID P P P P P P Thread Size NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER / P HYDRAULIC STRAINER ID P Thread Size G 3/ P HYDRAULIC STRAINER ID P P P P P P P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER Thread Size /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /4-14 NPT P HYDRAULIC STRAINER /4-14 NPT P HYDRAULIC STRAINER P P ID P P P P P P P P P P P Specs By Part Type Page 317

320 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Specs By Part Type ID P P P Thread Size G 1/ P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Page 318

321 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Thread Size G P HYDRAULIC STRAINER ID P P P P P P P P P HYDRAULIC STRAINER P P P P P Thread Size NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G 3/ P HYDRAULIC STRAINER ID P P P P HYDRAULIC STRAINER P P P Thread Size NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER ID P P P P P P P P P P P P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Specs By Part Type Page 319

322 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Specs By Part Type ID P P P HYDRAULIC STRAINER P P P P P P P P P P P P P P P P Thread Size G 1 1/ P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P Thread Size G P ID P P Thread Size /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER /4 NPT P HYDRAULIC STRAINER P ID P P P P P P P P P P P P P P P Thread Size /2 NPT P HYDRAULIC STRAINER ID P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER Thread Size /2-11 1/2 NPT /2-11 1/2 NPT /4-11 1/2 NPT /4-11 1/2 NPT /4-11 1/2 NPT ID P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P P P P P P P P P P P P P P P P P Page 320

323 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Thread Size G P HYDRAULIC STRAINER ID P P P P P P ID P P P P P P P P P P P P P P P P P P P HYDRAULIC STRAINER P P P P P P P P P P P P P P P P P P P P P P P P P P P Thread Size /4 NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER Specs By Part Type Page 321

324 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Specs By Part Type Thread Size G 1 1/ P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER G 1 1/ P HYDRAULIC STRAINER ID P HYDRAULIC STRAINER P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Thread Size /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER ID P Thread Size G P HYDRAULIC STRAINER P ID P P Thread Size G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P Page 322

325 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued ID P P P P P P P P P P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P P P Thread Size /2-11 1/ P HYDRAULIC STRAINER /2-11 1/2 NPT /2-11 1/2 NPT P HYDRAULIC STRAINER P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P P P P P P P P P P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Specs By Part Type Page 323

326 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Specs By Part Type ID P P P P P P P P Thread Size G P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Page 324

327 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued ID P P P P P P P P P P P P P P P HYDRAULIC STRAINER P HYDRAULIC STRAINER Thread Size /2 NPT P HYDRAULIC STRAINER /2 NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER ID P HYDRAULIC STRAINER P HYDRAULIC STRAINER Thread Size /2-8 NPT P HYDRAULIC STRAINER /2-8 NPT P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Specs By Part Type Page 325

328 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued Specs By Part Type ID P P P P Thread Size /2 NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER /2 NPT P NPT P HYDRAULIC STRAINER G 1/ P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER G 2 1/ P HYDRAULIC STRAINER G 2 1/ P HYDRAULIC STRAINER G 2 1/ P HYDRAULIC STRAINER G P G P HYDRAULIC STRAINER G P HYDRAULIC STRAINER ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P ID P P P Thread Size M P ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Page 326

329 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Cartridge - continued Hydraulic Cartridge - continued ID P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P P Width P ID P P P P P P P P P P P P P P P P ID P P P HYDRAULIC STRAINER Thread Size NPT P HYDRAULIC STRAINER NPT P HYDRAULIC STRAINER ID P P Hydraulic In-line Inlet Size Overall P HYDRAULIC INLINE P HYDRAULIC INLINE P HYDRAULIC INLINE P HYDRAULIC INLINE P HYDRAULIC INLINE P HYDRAULIC INLINE x P HYDRAULIC INLINE Hydraulic Spin-on Thread Size / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON Specs By Part Type Page 327

330 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Spin-on - continued Hydraulic Spin-on - continued Specs By Part Type Thread Size / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON UNF P HYDRAULIC SPIN-ON UNF P HYDRAULIC/LUBE SPIN-ON / P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON M24 x P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON M24 x 1.5 Male P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON M24 x P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX Thread Size / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON, DURAMAX G 3/ P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON G 3/ P HYDRAULIC SPIN-ON M24 x P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON / P HYDRAULIC/LUBE SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX Page 328

331 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Spin-on - continued Hydraulic Spin-on - continued Thread Size / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON M23 x P HYDRAULIC SPIN-ON, DURAMAX M24 x P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC/LUBE SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON Thread Size / P HYDRAULIC SPIN-ON, DURAMAX /4-BSP P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON /4-11 BSP P HYDRAULIC SPIN-ON /4-11 BSP P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON /4-12 UN P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON, DURAMAX / P HYDRAULIC SPIN-ON Specs By Part Type Page 329

332 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Hydraulic Spin-on - continued Hydraulic Spin-on - continued Specs By Part Type Thread Size / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON /4-BSP P HYDRAULIC SPIN-ON M42x P HYDRAULIC SPIN-ON M45 x P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON Thread Size / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON G 1 1/ P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON / P HYDRAULIC SPIN-ON Lube Cartridge ID P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW Page 330

333 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Lube Cartridge - continued Lube Cartridge - continued ID P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE COMBINATION P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE SOCK P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE ID P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE ID P LUBE CARTRIDGE FULL FLOW ID P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE SOCK P LUBE CARTRIDGE ID P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE SOCK P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE SOCK P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE KIT P LUBE CARTRIDGE FULL FLOW Specs By Part Type Page 331

334 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Lube Cartridge - continued Lube Spin-on - continued Specs By Part Type ID P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE Thread Size / P LUBE CARTRIDGE ID P LUBE CARTRIDGE SOCK P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE FULL FLOW P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE P LUBE CARTRIDGE Lube Spin-on Thread Size / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON BYPASS M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M18 x P LUBE SPIN-ON FULL FLOW M18 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW Thread Size M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW M26 x P LUBE SPIN-ON COMBINATION M26 x P LUBE SPIN-ON COMBINATION M20 x P LUBE SPIN-ON BYPASS M22 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON COMBINATION P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW ELF7345 LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW ELF7349 LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW Page 332

335 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Lube Spin-on - continued Lube Spin-on - continued Thread Size / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M24 x P LUBE SPIN-ON FULL FLOW M26 x P LUBE SPIN-ON COMBINATION M92 x 2.5-6H P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M18 x P LUBE SPIN-ON BYPASS / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW M24 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M22 x P LUBE SPIN-ON FULL FLOW Thread Size M27 x P LUBE SPIN-ON FULL FLOW M24 x P LUBE SPIN-ON COMBINATION P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW M26 x P LUBE SPIN-ON COMBINATION M26 x P LUBE SPIN-ON BYPASS M26 x P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M24 x P LUBE SPIN-ON COMBINATION M20 x P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW M26 x P LUBE SPIN-ON COMBINATION / ELF2504 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW M30 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / ELF7483 LUBE SPIN-ON FULL FLOW / ELF7739 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON COMBINATION P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW M30 x P LUBE SPIN-ON FULL FLOW M30 x P LUBE SPIN-ON FULL FLOW M32 x P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M30 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS / P LUBE SPIN-ON BYPASS M30 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW Specs By Part Type Page 333

336 Product Specifications By Type and Dimension Especificaciones de los productos por tip oy dimensiones Caractéristiques techniques par type et dimensions Produktangaben nach Typen und Abmessungen Specificazioni prodotto per tipo e dimensione Specs By Part Type Lube Spin-on - continued Thread Size / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M20 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M30 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / ELF7947 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / ELF7670 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / ELF7405 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON BYPASS / ELF2500 LUBE SPIN-ON FULL FLOW / ELF3998 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON COMBINATION / ELF7300 LUBE SPIN-ON COMBINATION M95 x P LUBE SPIN-ON COMBINATION M95 x ELF7900 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M52 x P LUBE SPIN-ON COMBINATION M95 x P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M95 x ELF2501 LUBE SPIN-ON FULL FLOW M90 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M36 x P LUBE SPIN-ON COMBINATION / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M36 x P LUBE SPIN-ON FULL FLOW / ELF2502 LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M36 x P LUBE SPIN-ON FULL FLOW M36 x ELF7367 LUBE SPIN-ON FULL FLOW M45 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW M60 x P LUBE SPIN-ON COMBINATION M42 x P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW / P LUBE SPIN-ON FULL FLOW Oil Coalescing Thread Size M16 x 1.5-6H P COALESCING FILTER Seals, Gaskets, Washers ID Height P WASHER GASKET ID Depth P GASKET, LIQUID FILTER P GASKET, LIQUID FILTER ID P GASKET, COVER ID Depth P GASKET COVER P GASKET ID Cross Section P GASKET Transmission ID P TRANSMISSION CARTRIDGE P TRANSMISSION CARTRIDGE P TRANSMISSION CARTRIDGE Width Height Depth P TRANSMISSION FILTER KIT P TRANSMISSION FILTER KIT Width ID Depth P TRANSMISSION FILTER KIT P TRANSMISSION FILTER KIT ID P TRANSMISSION CARTRIDGE P TRANSMISSION CARTRIDGE P TRANSMISSION CARTRIDGE P TRANSMISSION CARTRIDGE Thread Size / P TRANSMISSION SPIN ON Width Height P TRANSMISSION FILTER KIT Width Height Depth P TRANSMISSION FILTER KIT Page 334

337 Notes 335

338 Total Filtration Solutions Vehicles Engines Equipment Lube Filter SSG Air Cleaner In-Tank Return/Suction Filter PowerCore Air Cleaner Exhaust Accessories Fuel Filter Exhaust Accessories Duramax Hydraulic Filter Lube Filter Muffler Vacuator Valve Coolant Filter Hydraulic Filter Transmission Filter Duramax Transmission Filter Fuel Filter Water Separator Fuel Filter Vent Panel Filter Exhaust Accessories Fuel Filter Water Separator Stack Pipe Clamp Fuel Filter Muffler Lube Filter Air Cleaner Lube Filter Fuel Filter Muffler Fuel Filter Water Separator Muffler Guard Transmission Filter Transmission Filter Hydraulic Filter Exhaust Elbow and Tubing Coolant Filter Air Cleaner Exhaust Flex Tubing Coolant Filter Coolant Filter Medium or High Pressure Filter Fuel Filter Suction Filter Low Pressure Filter Low or Medium Pressure Filter Return Line Filter Lube Filter In-Tank Return Filter Breather 336 Strainer In-Tank Return/Suction Combination Fuel Filter

339 Cross Reference Internet Resources North & South America, Africa Australia Europe & Asia Pacific Catalogs in Print North and South American Catalogs Engine Air Cleaners & Accessories, No. F Exhaust Products Guide, No. F All Products Cross Reference, No. F Filter Application Guide, No. F European & Middle East Region Catalogs Technical Air Catalog, No. F Hydraulic Catalogue, No. F Truck & Bus Catalog, No. F Agriculture Catalog, No. F Lift truck & Forklift Catalog, F Donaldson Company, Inc. Minneapolis, MN Catalog No. F (01/09) 2009 Donaldson Company, Inc. Printed in the U.S.A. Donaldson Company, Inc. reserves the right to change or discontinue any model or specification at any time and without notice.