:18 Server Redundanz GLN
|
|
|
- Annabel Gardner
- 9 years ago
- Views:
Transcription
1 df4or.de Start Funkbetrieb RTTY Icom CI-V Software Varia Impressum 3.1 Adressing Each message (frame) sent to a rig or received from a rig contains two adresses. The destination (to-adress) and the sender (from-adress). Each model has it's own default CI-V adress, which can be changed by the user. If two or more rigs of the same model are used on the bus (or level converter), you need to change the adresses of the rigs, each individual rig must have it's own, distinct adress. Valid adresses as defined in the Icom CI-V Reference Manual (3rd edition) range from $01 to $7F. With the IC-7000 now (Dec. 2005) at adress $70 that does not leave many adresses for future rigs. I see no reason why adresses up to $EF or even $F9 couldn't be used for rigs, with the exception of $E0 (default Icom controller adress). Values $FA to $FF are reserved for special protocol functions. $FE $FE to-adr fm-adr Cmd Sub Data Data $FD To-adress is the 3rd byte in a frame, from-adress the 4th byte. «Previous Table of Contents Next» There are some reserved adresses with special meaning: $00: Used as to-adress, means all connected rigs. Any rig with CI-V Transceive set to on should react to commands adressed to $00. Any rig with CI-V Transceive set to on adresses it's messages to $00 when tuning the dial, changing mode etc. 1 von 6 pgpool / Datenbank replikation
2 $E0: Reserved for the controller, i.e. the computer. But to my knowledge no rig really cares where the messages come from, so any adress could be used as from-adress. $FA $FF: Reserved for protocol functions such as frame delimiters, Ok, Not-Good, collision signals, empty memory etc. These values must not be used as adresses. Default adresses Each Icom model has it's own, distinct default adress. As a general rule, Icom used only even adresses ($02, $04, $06...). Each model was given a new default adress when it came out. The user can change the default adress if required. On older rigs this was done by (re-) soldering some diodes, on newer rigs the adress can be changed by setup through the front panel or even by CI-V commands. Adresses can be selected from $01 to $EF, giving 239 distinct adresses. The following is a nearly complete table of all known adresses from CI-V capable rigs, not only by Icom. Icom-Model Addr Memories Bandedge Type IC-271 $ ,2 VHF Allmode IC-275 $ P1,P2 VHF Allmode IC-375 $ P1, P2 220MHz Allmode IC-471 $ ,2 UHF Allmode IC-475 $ P1,P2 UHF Allmode IC-575 $ P1,P2 10m & 6m Allmode IC-7000 $ HF/VHF/UHF Allmode IC-703 $ P1, P2 HF Allmode QRP IC-706 $ P1, P2 HF/VHF Allmode IC-706MkII $4E 99+3 P1, P2 HF/VHF Allmode IC-706MkIIG $ P1, P2 HF/VHF/UHF Allmode IC-707 $3e?? HF Allmode IC-718 $5E 99+2? HF Allmode IC-725 $ ,26 HF Allmode 2 von 6 pgpool / Datenbank replikation
3 IC-726 $ P1, P2 HF/6m Allmode IC-728 $ , 26 HF Allmode IC-729 $3A 26 25, 26 HF/6m Allmode IC-735 $ ,12 HF Allmode IC-736 $40?? HF/6m Allmode IC-737 $3C 99+3 P1, P2 HF Allmode IC-738 $44?? HF Allmode IC-7400 (IC-746Pro) $ P1, P2 HF/VHF Allmode IC-746 $ P1, P2 HF/VHF Allmode IC-751A $1C 32 1,2 HF Allmode IC-756 $ P1, P2 HF/6m Allmode IC-756Pro $5C 99+2 P1, P2 HF/6m Allmode IC-756ProII $ P1, P2 HF/6m Allmode IC-756ProIII $6e 99+2 P1, P2 HF/6m Allmode IC-761 $1E? P1, P2 HF Allmode IC-765 $2C 99+2 P1, P2 HF Allmode IC-775 $ P1, P2 HF Allmode IC-7700? 100? HF Allmode Contest IC-78 $62?? HF Allmode IC-7800 $6A 99 P1, P2 HF Allmode IC-781 $ P1, P2 HF Allmode IC-820 $42 2x80+3 P1, P2 VHF/UHF Allmode IC-821 $4C 2x80+3 P1, P2 VHF/UHF Allmode IC-910 $60 2x x 6 VHF/UHF Allmode IC-970 $2E 99+3 P1, P2 VHF/UHF Allmode IC-1271 $ ,2 SHF IC-1275 $ P1, P2 SHF IC-X3? P1, P2 Commercial HF Transceiver IC-R10 $52?? Handheld scanner IC-R20 $6C Handheld scanner 3 von 6 pgpool / Datenbank replikation
4 IC-R71 $1A 32? General Coverage Receiver IC-R72 $32 101? General Coverage Receiver IC-R75 $5A 100 P1, P2 General Coverage Receiver IC-R7000 $08?? General Coverage Receiver IC-R7100 $ xP1,P2 General Coverage Receiver IC-R8500 $4A 800 n/a Gen.Cov.RX IC-R9000 $2A 99 10xP1, P2 General Coverage Receiver IC-R9500 $ Auto: 100, Skip: 100, Scanedge: 20 General Coverage Receiver Controller/PC $E0 - - Mini Scout $ Optoelectronics Mini Scout freq. counter Optoscan 456/535 $ Optoelectronics Optoscan ID-1 $ JARL 23cm digital data/voice radio FC-3002 $ ACECO FC-3002 counter Thanks to John, Trevor, Dave, John, Sergey, Mark, Don, Stephane and others who helped completing this table. The same list, sorted by adresses. Since Icom assigned adresses in an ascending order when new radios came out, it gives a historical overview of the rigs appearance on the market (mostly, with some irregularities and gaps). This list shows only Icom rigs, not those of other vendors capable of the CI-V protocol. The years when the rigs appeared on the market are from my memory or from (tnx!). Icom Model CI-V Address Year to market IC-735 $ ? $06? IC-R7000 $ IC-275 $ IC-375 $12 198? 4 von 6 pgpool / Datenbank replikation
5 IC-475 $ IC-575 $16 198? IC-1275 $18 198? IC-R71 $1A 1984 IC-751A $1C 1985 IC-761 $1E 1987 IC-271 $ IC-471 $ IC-1271 $ IC-781 $ IC-725 $ IC-R9000 $2A 1989 IC-765 $2C 198? IC-970 $2E 1990 IC-726 $ IC-R72 $ IC-R7100 $ ? $36? IC-728 $ IC-729 $3A 1992 IC-737 $3C 1993 IC-707 $3E 1993 IC-736 $40 19?? IC-820 $ IC-738 $ IC-775 $ IC-706 $ IC-R8500 $4A 1996 IC-821 $4C 1996 IC-706MkII $4E 1997 IC-756 $ von 6 pgpool / Datenbank replikation
6 IC-R10 $ ? $54? IC-746 $ IC-706MkII-G $ IC-R75 $5A 1999 IC-756Pro $5C 2000 IC-718 $5E 2001 IC-910 $ IC-78 $ IC-756ProII $ IC-746Pro $ IC-703 $ IC-7800 $6A 2004 IC-R20 $6C 2004 IC-756ProIII $6E 2004 IC-7000 $ IC-R9500 $ IC-X3? 2007 IC-7700? 2007 Last change: May 2007 Back to Top 6 von 6 pgpool / Datenbank replikation
Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder
Modification of an AOR AR-8600 receiver to tune it with a ACECO FC-3002 frequency finder Matthias DD1US updated June 2 nd 2011 Description of the ACECO FC-3002 unit: The ACECO FC-3002 is a handheld frequency
ic- 2730a (USA, EXP) ic- 2730e (Europe)
November 2014 VHF/UHF DUAL BAND TRANSCEIVERS ic- 2730a (USA, EXP) ic- 2730e (Europe) Icom proudly announces the debut of the new VHF/UHF dual band transceiver, IC-2730A/2730E. It is the successor of the
ST-1 Satellite Tracking Program for Partner Schools of
ST-1 Satellite Tracking Program for Partner Schools of What is a Satellite Tracking Program? A NEW opportunity for Quest Partner Schools start a Satellite Tracking Program with three parts: 1. An after-school
Radio Models AR-146/147/446
TIG-SL-USB SignaLink USB Cable List - Rev 14 Last Update - 12March 2009 Tigertronics SignaLink USB Digital Interface - Cable Interface Listing SignaLink Jumper Settings & Wiring Information For Base &
BASIC WINLINK 2000 TRAINING GUIDE
BASIC WINLINK 2000 TRAINING GUIDE Lewis Thompson W5IFQ, AAR6UK June 26, 2009 CONTENTS Introduction... 3 About Winlink 2000... 3 Required Equipment... 3 Setting Up Airmail Step by Step...5 Connecting to
System requirements. Usable microsd card. USB driver installation INSTRUCTIONS CLONING SOFTWARE CS-51
CLONING SOFTWARE CS-51 INSTRUCTIONS D This cloning software is designed for data entry, settings, and cloning of the ID-51A/E VHF/UHF TRANSCEIVER. D The CS-51 has a Help file to describe functions and
Calibrating the SDR Frequency Display to match your Ham Station Radio Frequency Display on each Ham Band
When using a Software Defined Radio as a band scope, one thing that can greatly assist in frequency coordination between the SDR and the ham station transceiver, is for the frequency calibration to yield
Guide to Setting up Internet Connection Sharing for Windows
Guide to Setting up Internet Connection Sharing for Windows Document Date: December 20, 2005 Document Version: Version: 1.0 Disclaimer: Please note that this document is provided on an as is where is basis
Youkits TJ2B 2016 SSB CW HF TRANSCEIVER OPERATION GUIDE
Youkits TJ2B 2016 SSB CW HF TRANSCEIVER OPERATION GUIDE TJ2B is a high-performance QRP portable multi-band SSB/CW transceiver, used with DDS as LO, offering wide frequency coverage and fine tuning rate.
Use this guide if you are no longer able to scan to Sharpdesk. Begin with section 1 (easiest) and complete all sections only if necessary.
Use this guide if you are no longer able to scan to Sharpdesk Instructions: Begin with section 1 (easiest) and complete all sections only if necessary. 1 Section 1 Complete pages 3-5. Scan to the desired
Setting up Your Acusis Email Address. Microsoft Outlook
Setting up Your Acusis Email Address in Microsoft Outlook Click on your Microsoft Outlook Version you are using: Microsoft Outlook 2002/XP Microsoft Outlook 2003 Microsoft Outlook 2007 Microsoft Outlook
SafeSPI - Serial Peripheral Interface for Automotive Safety
Page 1 / 16 SafeSPI - Serial Peripheral Interface for Automotive Safety Technical SafeSPI_specification_v0.15_published.doc 30 July 2015 Page 2 / 16 1 INTRODUCTION 3 1.1 Requirement specification types
Driver Pant 8 and antenna switcher Ant 8. User manual
Driver Pant 8 and antenna switcher Ant 8 User manual Table of contents Table of contents... 2 Introduction... 3 Shipping Contents... 3 Technical Data... 3 Control Panel... 4 Rear panel... 5 Controller
Using. SDR-Console by Simon Brown
Using SDR-Console by Simon Brown Quick Start Guide & Hints & Tips Welcome, this is a quick start guide that will be a constantly upgraded document as changes are made to the SDRPlay RSP and to SDR-Console.
SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd.
CG Antenna SB-2000 USB Radio Interface Operating Manual CG Antenna Co. Ltd. Shanghai, China FEATURES Connect your computer with USB port. No need serial or parallel port. Most of Radio programs are built
Here are the details with pictures of the items for sale as listed below. Please Scroll Down.
Here are the details with pictures of the items for sale as listed below. Please Scroll Down. Further Items are also available - for further list please phone or e-mail Phone Ivan 073 528 4950 or 021 439
Moven Studio realtime. streaming
Moven Studio realtime network streaming UDP protocol specification Document MV0305P Revision B, 19 December 2007 Xsens Technologies B.V. phone +31 88 XSENS 00 Pantheon 6a +31 88 97367 00 P.O. Box 559 fax
N1MM Logger Use for CMARA Field Day By Terry G. Glagowski / W1TR updated 2013-06-21 18:42
N1MM Logger Use for CMARA Field Day By Terry G. Glagowski / W1TR updated 2013-06-21 18:42 N1MM Overview Software Installation Hardware / Software Setup Database Setup Contest Log Setup Band Setup QSO logging
Remote Control Your HF Rig via the Internet. By Alfred T Yerger II WA2EHI
Remote Control Your HF Rig via the Internet By Alfred T Yerger II WA2EHI Using the internet to remotely control you amateur equipment is rapidly becoming a hot topic. Ten Tec recently introduced their
TS-480HX/TS-480SAT. HF/50MHz All-Mode Transceiver KENWOOD. NETWORK COMMAND SYSTEM with Voice over Internet Protocol capability
TS-480HX/TS-480SAT HF/50MHz All-Mode Transceiver KENWOOD NETWORK COMMAND SYSTEM with Voice over Internet Protocol capability DX Distinction Creative Concept, Elegant Engineering 200W output (50MHz: 100W)
DSL Self-install Kit Instructions
DSL Self-install Kit Instructions Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters on your telephone
General Settings Guide
Operating Instructions General Settings Guide 1 2 3 4 5 6 7 8 9 Connecting the Machine System Settings Copier / Document Server Features Facsimile Features Printer Features Scanner Features Registering
D-Link DAP-1360 Repeater Mode Configuration
D-Link DAP-1360 Repeater Mode Configuration Outline 1. Package Contents 2. System Requirements 3. Hardware Overview Connections LED s WPS LED/Button 4. Default Settings 5. Configuring your LAN Adapter
With a barcode reader connected to the printer, labels and barcodes can easily be printed by scanning barcodes.
With a barcode reader connected to the printer, labels and barcodes can easily be printed by scanning barcodes. Connect a barcode reader to the printer to create a label or barcode using "P-touch Editor
rs-ba1 remote control software quick reference guide
rs-ba1 remote control software quick reference guide Contents Requirements... 2 Firewall Considerations... 3 Connecting to the RS-BA1 Locally... 4 Finding the IP of your Base Station Computer... 4 Setting
Programming and Using the Courier V.Everything Modem for Remote Operation of DDF6000
Programming and Using the Courier V.Everything Modem for Remote Operation of DDF6000 1.0 Introduction A Technical Application Note from Doppler System July 5, 1999 Version 3.x of the DDF6000, running version
Manual made by PC4U, The Netherlands, [email protected] Pag 1
PMSDR (you don t need the switchboard plug- in!) FT1000mp Soundcard for the PMSDR (I use the EMU 0202 USB) WinradHD ( now called HDSDR) Omnirig Cat software (A COM component for transceiver/receiver CAT
Change Log. 2 per vices corporation
P E R V I C E S C O R P O R AT I O N C R I M S O N Q U I C K S TA R T G U I D E 2 per vices corporation Change Log 2015-01-06: Rev A: Initial Release 2015-01-12: Rev B: Added SFP+ configuration information.
User Manual. DG LINK Application Program 071-0056-50. www.tektronix.com. This document applies to firmware version 2.00 and above.
User Manual DG LINK Application Program 071-0056-50 This document applies to firmware version 2.00 and above. www.tektronix.com Copyright Tektronix Japan, Ltd. All rights reserved. Copyright Tektronix,
EARTH PEOPLE TECHNOLOGY SERIAL GRAPH TOOL FOR THE ARDUINO UNO USER MANUAL
EARTH PEOPLE TECHNOLOGY SERIAL GRAPH TOOL FOR THE ARDUINO UNO USER MANUAL The Serial Graph Tool for the Arduino Uno provides a simple interface for graphing data to the PC from the Uno. It can graph up
Network FAX Driver. Operation Guide
Network FAX Driver Operation Guide About this Operation Guide This Operation Guide explains the settings for the Network FAX driver as well as the procedures that are required in order to use the Network
DPC-536 Programming and Debug Guide
DPC-536 Programming and Debug Guide CONTENTS 1. Introduction ------------------------------------------------------------------------------- 2 2. System Password and Master Card -----------------------------------------------------
OWNERS MANUAL. Status Monitor. for Windows 95, 98, ME, NT 4, 2000 & XP. SIGNALCRAFTERS TECH, INC. www.signalcrafters.com
OWNERS MANUAL Status Monitor for Windows 95, 98, ME, NT 4, 2000 & XP SIGNALCRAFTERS TECH, INC. www.signalcrafters.com 57 Eagle Rock Avenue, East Hanover, NJ 07936 Tel: 973-781-0880 or 800-523-5815 Fax:
The irnetbox Manager User Guide
The irnetbox Manager User Guide Chris Dodge RedRat Ltd April 2014 For irnetbox Manager 3.05 1 Contents 1. Introduction...3 2. Initial Network Configuration...3 3. Finding irnetboxes...3 3.1 Device Information
Guide to Installing BBL Crystal MIND on Windows 7
Guide to Installing BBL Crystal MIND on Windows 7 Introduction The BBL Crystal MIND software can not be directly installed on the Microsoft Windows 7 platform, however it can be installed and run via XP
DUKANE Intelligent Assembly Solutions
PC Configuration Requirements: Configuration Requirements for ipc Operation The hardware and operating system of the PC must comply with a list of minimum requirements for proper operation with the ipc
EDGE FX Network configuration
Page 1 of 16 TITLE: Category: EDGE FX Network configuration GERBER EDGE Document Number: 4280 Supplied by: Gerber Service Last Modified: April 14, 2011 Summary: In order to connect an EDGE FX to your PC
SCSmail High Speed HF E-Mail System
Version 2.0.1.4 03 / 2014 SCSmail High Speed HF E-Mail System SCS Special Communications Systems GmbH & Co. KG SCS Special Communications Systems GmbH & Co. KG Roentgenstrasse 36 63454 Hanau GERMANY Internet:
Repeaters what are they and how to use them
Repeaters what are they and how to use them More hams use frequency-modulated (FM) voice than any other communications mode. Most hams have an FM rig of some type. They use it to keep in touch with their
Experiences with Portable Equipment for Working LEO Satellites. AMSAT-UK Colloquium 2011 Ivo Klinkert, PA1IVO
A Multipurpose Portable Setup Experiences with Portable Equipment for Working LEO Satellites AMSAT-UK Colloquium 2011 Ivo Klinkert, PA1IVO A Multipurpose Portable Setup- PA1IVO page: 1 of 20 Overview Presentation
AccXES Account Management Tool Administrator s Guide Version 10.0
AccXES Account Management Tool Administrator s Guide Version 10.0 701P41531 May 2004 Trademark Acknowledgments XEROX, AccXES, The Document Company, and the identifying product names and numbers herein
How To Set The Sensor On A Powerpoint 3.5 (Powerpoint) On A Blackberry 2.5A (Powerplant) On An Iphone Or Ipad (Powerplant) On The Blackberry 3.2 (
VMBGPOD Touch panel with Oled display for VELBUS system 1 Binairy format: bits Description
SB-1000 Link-All-3.0 USB Radio interface Operating Manual CG Antenna Co. Ltd.
CG Antenna SB-1000 Link-All-3.0 USB Radio interface Operating Manual CG Antenna Co. Ltd. Shanghai, China - 1 - http://www.cgantenna.com FEATURES Connect your computer with USB port. No need serial or parallel
1 PC to WX64 direction connection with crossover cable or hub/switch
1 PC to WX64 direction connection with crossover cable or hub/switch If a network is not available, or if it is desired to keep the WX64 and PC(s) completely separated from other computers, a simple network
for Android Windows Desktop and Conduit Quick Start Guide
for Android Windows Desktop and Conduit Quick Start Guide HanDBase is a Registered Trademark of DDH Software, Inc. All information contained in this manual and all software applications mentioned in this
Enabling Internet Connection Sharing on Windows 2000 15. Enabling ICS On Windows XP As The Host 4 Enabling ICS On Windows XP As The Client 11
Sharing an Internet Connection with SatDirect Plus Table of Contents Contents Section 1: Section 2: Section 3: Introduction... 1 Physical Setup......2 Enabling Internet Connection Sharing on Windows XP
Spectrum Use Recommendation of the FRC Coordination Committee Florida Repeater Council Directors meeting - October 13, 2007
Spectrum Use Recommendation of the FRC Coordination Committee Florida Repeater Council Directors meeting - October 13, 2007 Introduction At the Feb 2007 Orlando meeting of the Florida Repeater Council,
RIGtalk. Revision 5. Owner s Manual 2012.
RIGtalk Revision 5 Owner s Manual 2012 www.westmountainradio.com 1020 Spring City Drive Waukesha, WI 53186 262-522-6503 [email protected] 2012 West Mountain Radio, All rights reserved. All trademarks
Quick Reference Guide. copy. locked print. fax. scan-to-email
Quick Reference Guide copy locked print fax scan-to-email Copy Basic Copy Procedure 3 Place original(s) face up in the Auto Document Feeder, or face down on the Platen Glass.. Select the [Copy] function
Windows Offline Files
Windows Offline Files 1. Description: Windows Offline Files or Client Side Caching (CSC) allows files and folders stored on any Server Message Block (SMB) network share to be available offline. To further
BASLER ACE QUICK INSTALLATION GUIDE
BASLER ACE QUICK INSTALLATION GUIDE Rev. 01 Quick installation Guide V1 1 Introduction The installation procedures in this guide assume that you want to get your camera operational and begin capturing
Ham Radio Deluxe. By Jean-Paul LeBlanc, VE9BK
Ham Radio Deluxe By Jean-Paul LeBlanc, VE9BK The purpose of this presentation is to give a very high level overview of Ham Radio Deluxe, (HRD) which was created in 2003 by Peter PH1PH and Simon Brown,
ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo
ADSL Router Quick Installation Guide Revised, edited and illustrated by Neo A typical set up for a router PCs can be connected to the router via USB or Ethernet. If you wish to use a telephone with the
OPERATION MANUAL. MV-410RGB Layout Editor. Version 2.1- higher
OPERATION MANUAL MV-410RGB Layout Editor Version 2.1- higher Table of Contents 1. Setup... 1 1-1. Overview... 1 1-2. System Requirements... 1 1-3. Operation Flow... 1 1-4. Installing MV-410RGB Layout
CPU Organisation and Operation
CPU Organisation and Operation The Fetch-Execute Cycle The operation of the CPU 1 is usually described in terms of the Fetch-Execute cycle. 2 Fetch-Execute Cycle Fetch the Instruction Increment the Program
DSL Self-install Kit Instructions. SpeedStream 4100
DSL Self-install Kit Instructions SpeedStream 4100 Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters
How to Program a Commander or Scout to Connect to Pilot Software
How to Program a Commander or Scout to Connect to Pilot Software Commander and Scout are monitoring and control products that can transfer physical environmental conditions and alarm sensor electrical
Accounting Manager. User Guide A31003-P1030-U114-2-7619
Accounting Manager User Guide A31003-P1030-U114-2-7619 Our Quality and Environmental Management Systems are implemented according to the requirements of the ISO9001 and ISO14001 standards and are certified
Yale Software Library http://www.yale.edu/software/
e/ Yale Software Library http://www.yale.edu/software/ For assistance contact the ITS Help Desk 785-3200, 432-9000, [email protected] Remote Desktop General overview With Remote Desktop, you get full access
General Settings Guide
Operating Instructions General Settings Guide 1 Connecting the Machine 2 System Settings 3 Copier/Document Server Features 4 Facsimile Features 5 Printer Features 6 Scanner Features 7 Registering Addresses
Software User Guide UG-461
Software User Guide UG-461 One Technology Way P.O. Box 9106 Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 Fax: 781.461.3113 www.analog.com ezlinx icoupler Isolated Interface Development Environment
1. Introduction... 3. 2.Fixture exterior view... 3. 3. Connecting the Robe Universal Interface... 4. 3.1 Software update of the fixture...
1 Table of contests 1. Introduction... 3 2.Fixture exterior view... 3 3. Connecting the Robe Universal Interface... 4 3.1 Software update of the fixture... 4 3.2 Connecting a DMX console to the Media Fusion...
DSL Self-install Kit Instructions. SpeedStream 5360
DSL Self-install Kit Instructions SpeedStream 5360 Cover and installation notes Page 1 1. Verify your system requirements Page 2 2. Verify the contents of your DSL Self-Install kit Page 2 3. Install filters
SysPatrol - Server Security Monitor
SysPatrol Server Security Monitor User Manual Version 2.2 Sep 2013 www.flexense.com www.syspatrol.com 1 Product Overview SysPatrol is a server security monitoring solution allowing one to monitor one or
Kingpin, @stake, January 2002
Research In Motion s BlackBerry Wireless E-Mail Devices: Decoding the Mobitex protocol Kingpin, @stake, January 2002 1 Introduction The Research In Motion BlackBerry wireless e-mail device product line
FTB8800 Software. Programming the FT 8800R with FTB8800. A Companion to Yaesu FT 8800R Operating Manual: The W5JCK Expanded Version
FTB8800 Software Programming the FT 8800R with FTB8800 A Companion to Yaesu FT 8800R Operating Manual: The W5JCK Expanded Version This manual is courtesy of W5JCK November 2006 Copyright 2006 by Ceburn
Web VTS Installation Guide. Copyright 2006-2010 SiiTech Inc. All rights reserved.
Web VTS Installation Guide Copyright 2006-2010 SiiTech Inc. All rights reserved. Table of Contents Overview of Web VTS... 1 System Requirements... 2 Installation Sequence... 3 Installing Web VTS... 6 ii
Remote Operation Note: I recently installed an ICOM IC-7200 with a single USB cable interface to HRD/DM780 6.3.0.417 so I'm no longer using the older remote operation setup described below. However, I'll
Central Controller G-50A/GB-50A Web Browser Operation Manual (For System Maintenance Engineer)
Mitsubishi Electric Building Air-conditioner Control System Central Controller G-50A/GB-50A Web Browser Operation Manual (For System Maintenance Engineer) Contents 1 Introduction...1 1-1 Conventions Used
IBM Emulation Mode Printer Commands
IBM Emulation Mode Printer Commands Section 3 This section provides a detailed description of IBM emulation mode commands you can use with your printer. Control Codes Control codes are one-character printer
The Answer to the 14 Most Frequently Asked Modbus Questions
Modbus Frequently Asked Questions WP-34-REV0-0609-1/7 The Answer to the 14 Most Frequently Asked Modbus Questions Exactly what is Modbus? Modbus is an open serial communications protocol widely used in
SITRANS RD500 Configuring the RD500 with PSTN or GSM modems and Windows-based servers and clients for communication Objective:
AG041410 SITRANS RD500 Configuring the RD500 with PSTN or GSM modems and Windows-based servers and clients for communication Objective: Determine how to configure the RD500 and your PSTN or GSM modem APPLICATION
1019-00-1528 GBIC-Optical SX 850nm (Multi Mode) 1019-00-1529 GBIC-Optical LX 1310nm (Single Mode) 1019-00-1530 GBIC-Electrical TX 1000 BaseT (RG-45)
Initial Instructions Before reading the Gigabit Ethernet (GbE) quick start guide, please refer to the DTS-330 or MVP-200 quick start guide that came with your test instrument. Preparing the GbE For Use
SharpdeskTM R3.1. Installation Guide Version 3.1.01
SharpdeskTM R3.1 Installation Guide Version 3.1.01 1 Copyright 2000-2004 by Sharp Corporation. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,
Technical Notes TN 1 - ETG 3000. FactoryCast Gateway TSX ETG 3021 / 3022 modules. How to Setup a GPRS Connection?
FactoryCast Gateway TSX ETG 3021 / 3022 modules How to Setup a GPRS Connection? 1 2 Table of Contents 1- GPRS Overview... 4 Introduction... 4 GPRS overview... 4 GPRS communications... 4 GPRS connections...
RCForb Server Setup. Overview
RCForb Server Setup Overview The RcForb Server allows you to setup your own remote station on Remote Hams. Three connections to your transceiver are required, and an Internet connection. The first required
Remote control circuitry via mobile phones and SMS
Remote control circuitry via mobile phones and SMS Gunther Zielosko 1. Introduction In application note No. 56 ( BASIC-Tiger sends text messages, in which we described a BASIC-Tiger sending text messages
Setting up Scan to Email
Setting up Scan to Email Basic information provided from the end user or the customer s IT staff: Static IP for the copier Subnet Mask (use IPCONFIG Command if not provided) Gateway (use IPCONFIG Command
The Newbieʼs Guide to Using D-Star
The Newbieʼs Guide to Using D-Star How to get the most out of your new D-Star transceiver V1.0 Susan Mackay VK3ANZ 1 2009 Susan Mackay Permission is granted to use this document in whole or part for non-commercial
Incident Commander Pro Radio-Based Automatic Tracking System
SAR Technology Inc. http://sartechnology.ca [email protected] Overview Incident Commander Pro Radio-Based Automatic Tracking System Setup of Kenwood Base Radio, GPS-Portable Radios and Incident Commander
Dealer s Manual VHF FM MOBILE TRANSCEIVER
VHF FM MOBILE TRANSCEIVER Dealer s Manual Alinco s DR-135 transceivers support the Channel Indication mode (User s mode), which protects dealer-defined parameter settings from being changed by the user.
Network Scanner Tool R3.1. User s Guide Version 3.0.04
Network Scanner Tool R3.1 User s Guide Version 3.0.04 Copyright 2000-2004 by Sharp Corporation. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited,
PGA103+ Low noise, high dynamic range preamp for VHF and UHF
PGA103+ Low noise, high dynamic range preamp for VHF and UHF By Sam Jewell, G4DDK and Kent Britain, WA5VJB Introduction This paper describes a low noise, high dynamic range VHF/UHF preamp that uses the
MARS Modification For Yaesu FT-897D. July, 2008. Matthew Bogner Austin, TX ibogner.net W5AKY
MARS Modification For Yaesu FT-897D July, 2008 Matthew Bogner Austin, TX ibogner.net W5AKY [email protected] Introduction I ve created this document to clear up some confusion regarding the expanded transmit
RTTY/CW TX TERMINAL for : IC756 ( all series ), IC7400, IC746, IC7000 (PC not required)
RTTY/CW TX TERMINAL for : IC756 ( all series ), IC7400, IC746, IC7000 (PC not required) I0CG Giuliano Carmignani Copyright GENNAIO / JANUARY 2008 [email protected] www.i0cg.com IC-756, IC-7400, IC746
Quick Installation. A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding. Quick Installation
Quick Installation A Series of Intelligent Bar Code Reader with NeuroFuzzy Decoding This chapter intends to get your new FuzzyScan scanner working with your existing system within minutes. General instructions
U.S. Department of Education 1998 Electronic Access Conferences
U.S. Department of Education 1998 Electronic Access Conferences 11/9/98 Session 43-1 Session 43 Mainframe Connectivity to Title IV Wide Area Network Session 43-2 Session 43 Mike Cline - NCS Development
Table of Contents. Cisco Disabling ICS when Preparing to Install or Upgrade to Cisco VPN Client 3.5.X on Microsoft Windows XP
XP Table of Contents Disabling ICS when Preparing to Install or Upgrade to Cisco VPN Client 3.5.X on Microsoft Windows XP...1 Introduction...1 Prerequisites...1 Requirements...1 Components Used...1 Conventions...1
S4000TH HART. HART Communication Manual
HART Communication Manual The information and technical data disclosed in this document may be used and disseminated only for the purposes and to the extent specifically authorized in writing by General
Preparing the Computers for TCP/IP Networking
Configuration Preparing the Computers for TCP/IP Networking Configuring Windows 98, and ME for TCP/IP Networking Verifying TCP/IP Properties Configuring Windows 2000 or XP for IP Networking Install or
HP Accessibility Guide
HP Accessibility Guide At HP, we re committed to improving our customers experience with products, information and services that are easier to access and simpler to use. We consider the needs of all our
IC-756 Pro III vs. Pro II
IC-756 Pro III vs. Pro II Improvements in the Pro III vs. the Pro II Adam Farson VA7OJ IC-756Pro3 Information & Links Copyright 2006 North Shore Amateur Radio Club NSARC HF Operators 756Pro3 vs. Pro2 1
N4PY Client-Server Remote Operation. Introduction
Introduction N4PY Client-Server Remote Operation There are two ways to do remote operation of a radio using N4PY software. The way that has been done previously is to use any remote desktop program such
HD-TV100 MP Digital TV and media player
HD-TV100 MP Digital TV and media player User s manual 1. Functions overview: FULL HD TV HD Digital TV with MPEG-4(H.264)&MPEG-2, HD&SD standard DVB-T. HDMI HD format output 1080I, also compatible with
Lab - Using Wireshark to View Network Traffic
Topology Objectives Part 1: (Optional) Download and Install Wireshark Part 2: Capture and Analyze Local ICMP Data in Wireshark Start and stop data capture of ping traffic to local hosts. Locate the IP
Roofing Filters, Transmitted IMD and Receiver Performance
Roofing Filters, Transmitted IMD and Receiver Performance Rob Sherwood NCØB What s important when it comes to choosing a radio? Sherwood Engineering Why Did I Start Testing Radios? Purchased a new Drake
Out n About! for Outlook Electronic In/Out Status Board. Administrators Guide. Version 3.x
Out n About! for Outlook Electronic In/Out Status Board Administrators Guide Version 3.x Contents Introduction... 1 Welcome... 1 Administration... 1 System Design... 1 Installation... 3 System Requirements...
Perle Protocol Transparent Media Converter Modules
Perle Protocol Transparent Media Converter Modules Installation Guide C-4GPT-DSFP CM-4GPT-DSFP Part# 5500335-10 Overview This document contains instructions necessary for the installation and operation
