How To Buy A Kitchen Sink
|
|
- Richard Hall
- 3 years ago
- Views:
Transcription
1 STAINLESS STEEL DESIGNS cc No 43 Rudolf Street, Sunderland Ridge P.O. Box 7 Wierda Park, 0149 Telephone: (012) 66 Facsimile: (012) E- ssd@absamail.co.za (Karl) (Pat) (Johan) Sassda (Southern Africa Stainless Steel Development Association) PLEASE MAKE YOUR SELECTION FROM THE LIST BELOW! BAIN MARIES ; CABINETS & ACCESSORIES TROLLEY'S SINKS TABLES SINKS DISHWASHING TABLES SHELVING & RACKS SPECIALS MISCELLANEOUS
2 BAIN MARIES, CABINETS & ACCESSORIES BAIN MARIE WITH HOT CLOSET TOP ,6mm S/S, SIDES & BACK ,2mm S/S, INNER PANELS - 0.9mm 430 S/S 1150x750x910 3 Division, insulated 4.5 Kw, 380 V, 2 Phase R Division, un - insulated 4.5 Kw, 380 V, 2 Phase R x750x910 5 Division, insulated 6 Kw, 380 V, 2 Phase R Division, un - insulated 6 Kw, 380 V, 2 Phase R x750x910 6 Division, insulated 6 Kw, 380 V, 2 Phase R Division, un - insulated 6 Kw, 380 V, 2 Phase R HOT CLOSET ONLY TOP ,2mm S/S, SIDES & BACK ,2mm S/S, INNER PANELS - 0.9mm 430 S/S 1150x750x910 Insulated 4.5 Kw, 380 V, 2 Phase R Un - insulated 4.5 Kw, 380 V, 2 Phase R x750x910 Insulated 6 Kw, 380 V, 2 Phase R Un - insulated 6 Kw, 380 V, 2 Phase R x750x910 Insulated 6 Kw, 380 V, 2 Phase R Un - insulated 6 Kw, 380 V, 2 Phase R BAIN MARIE - TABLE MODEL ( ALL S/S CONSTRUCTION ) TOP - 1.6mm 304 S/S, SIDES & BACK ,2mm S/S, 460x750x300 1 Division 1.5 Kw, 220 V, 1 Phase R x750x300 2 Division 1.5 Kw, 220 V, 1 Phase R x750x300 3 Division 1.5 Kw, 220 V, 1 Phase R x750x300 4 Division 3 Kw, 220 V, 1 Phase R x750x300 5 Division 3 Kw, 220 V, 1 Phase R x750x300 6 Division 3 Kw, 220 V, 1 Phase R MOBILE BAIN MARIE TOP ,6mm S/S, SIDES & BACK ,2mm S/S, INNER PANELS - 0.9mm 430 S/S 1150x750x910 3 Division, un - insulated 3 Kw, 220 V, 1 Phase R x750x910 5 Division, un - insulated 3 Kw, 220 V, 1 Phase R SERVICE COUNTER ( NEUTRAL COUNTER ) NO DOORS TOP ,2mm S/S, SIDES & BACK ,2mm S/S, INNER PANELS - 0.9mm 430 S/S 460x750x910 Single panels R Double panel R x750x910 Single panels R Double panel R x750x910 Single panels R Double panel R x750x910 Single panels R Double panel R x750x910 Single panels R Double panel R x750x910 Single panels R Double panel R CUTLERY AND TRAY PICK_UP STATION ACCOMODATING 2 OFF 4 DIVISION CUTLERY TRAYS AND APPROX. 100 OFF TRAYS 1150x770x900 "L" Shaped side profile R 4 287
3 ELECTRICAL EQUIPMENT 1000x850x850 Industrial 3 plate range with an oven R x850x850 Industrial 3 plate range without an oven R SPARE PARTS FOR ABOVE SW24032 Rotary 3 position industrial switch R 340 KGE02 Outer grill element, 2000 Watts R 240 KGE01 Inner grill element, 2000 Watts R 240 VP70047 Oven elements, 2000 Watts R 398 SOTH53E 3 phase 380V, degree thermostat R 438 ACCESSORIES FOR BAIN MARIES AND COUNTERS Tray slide (up to 350mm wide) - s/steel tubular priced per linear metre R Tray slide (up to 350mm wide) - s/steel solid priced per linear metre R Tray slide - corner R 744 Riser shelf with full height sneeze guard - priced per metre R S/steel riser shelf only (up to 350mm wide) - priced per linear metre R Locks for door - priced individually R 119 Capping strips - priced individually R 196 Infra red lights - priced individually R 860 Overhead heating with switch for lengths up to 1000mm long R Overhead heating with switch for lengths up to 1500mm long R Overhead heating with switch for lengths up to 1750mm long R Waiters shelf (up to 350mm wide) - priced per linear metre R x s/steel legs with plastic adjustable feet R x s/steel legs with die cast aluminium adjustable feet R 494 DOORS FITTED TO SERVICE COUNTER FOR ONE SIDE OF HOT CLOSET / COUNTER 460mm unit Double panel 1 off hinged swing door R mm Unit Double panel 1 off hinged swing door R Stainless steel lockable lever locks (price per each) R 342 Stainless steel puddle latches R mm Unit Double panel, 2 off sliding doors R mm Unit Double panel, 2 off sliding doors R mm Unit Double panel, 2 off sliding doors R mm Unit Double panel, 2 off sliding doors R GLASS Curved glass fitted over a unit - priced per linear metre R mm thick toughened flat glass Priced per sq metre R BACK TO MAIN
4 TROLLEY'S TEA SERVING TROLLEYS 935x530x850mm 2 Tier - s/s light duty frame - 1.2mm thk 430 s/s shelves & doughnut buffers R x530x850mm 3 Tier - s/s light duty frame - 1.2mm thk 430 s/s shelves & doughnut buffers R x530x850mm 2 Tier - heavy duty frame - 1.2mm thk 430 s/s shelves & doughnut buffers R x530x850mm 3 Tier - heavy duty frame - 1.2mm thk 430 s/steel shelves & doughnut buffers R DISH CLEARING TROLLEYS 935x530x850mm 4 off PSB60 bins (white) - s/steel frame R Extra White PSB 40 bin for above R x530x850mm 3 off PSB60 bins, 1 off 1.2mm thk 430 half shelf - s/stee/ frame R Extra S/Steel trash bin for above R 813 Extra White PSB 40 bin for above R 112 TRAY AND CUTLERY TROLLEY 935x530x850mm 2 off CTH004 cutlery holders & 1 off s/s shelf under - All s/s frame R BULK FOOD SERVICE TROLLEY 850x700x910mm 150 Lt bulk food trolley unheated R x700x910mm 150 Lt bulk food trolley heated R Lid for a 150 Lt bulk food trolley R Extra reinforcing to trolley ie s/s corner angles to sides & Add R base, polyurethane insulation & a wrap around bumper Insulation only Add R x700x910mm 200 Lt bulk food trolley, unheated R x700x910mm 200 Lt bulk food trolley heated R Lid for a 200 Lt bulk food trolley R Extra reinforcing to trolley ie s/s corner angles to sides & Add R base, polyurethane insulation & a wrap around bumper Insulation only Add R x700x910mm 300 Lt bulk food trolley heated R Lid for a 300 Lt bulk food trolley R Extra reinforcing to trolley ie s/s corner angles to sides & Add R base, polyurethane insulation & a wrap around bumper Insulation only Add R 934 MOBILE SERVING AND HOLDING TROLLEY, INSULATED ONE DOOR OPEN TOP 650x840x910mm 14 x 1/1 g/n pans 50mm deep or 7 x 2/1 g/n pans 50mm deep, no inserts R MOBILE BANQUET TROLLEY (BANQUETMASTER) 2 DOORS, VERTICALLY POSITIONED 650x840x x 1/1 g/n pans 50mm deep or 16 x 2/1 g/n pans 50mm deep, no inserts R Fan Add R Humidification Add R GPA HOSPITAL FOOD SERVICE TROLLEY 1220x764x1060 As per TPA spec R Additional cup holder R 347 Additional 3000mm long moulded curley cord R 283 "Joist" swivel base with tow and pull hitch R Towable castors with tow and pull hitch R Plate holder R 476 Additional 3000mm long moulded curley cord R 283
5 PLATE STACKING TROLLEY, LOW TILTED BASE 690x840x900mm Plate stacking, on a low base - all s/s R HOSPITAL WARD TRAY TROLLEY HINGED DOORS, PLASTIC AND STAINLESS STEEL 1170x740x Compartment s/s and plastic trolley, plastic panels by others R All s/s doors - add R x740x Compartment s/s and plastic trolley, plastic panels by others R All s/s doors - add R HOSPITAL WARD TRAY TROLLEY HINGED DOORS, ALL STAINLESS STEEL 840x740x Compartment all stainless steel trolley, double panels R Insulation only Add R Heating elements and insulation - add R x740x Compartment all stainless steel trolley, double panels R Insulation only Add R Heating elements and insulation - add R x740x Compartment all stainless steel trolley, double panels R Insulation only Add R Heating elements and insulation - add R HOSPITAL WARD TRAY TROLLEY HINGED FOLD AWAY DOORS, ALL STAINLESS STEEL 840x740x Compartment all stainless steel trolley, single panels R x740x Compartment all stainless steel trolley, single panels R x740x Compartment all stainless steel trolley, single panels R BIN DOLLEY 420mm diameter Stainless steel bin dolley R mm diameter Mild steel bin dolley, epoxy coated or electroplated R 992 Black bin with lid R 217 GASTRONORM TROLLEY (COLDROOM RACK TROLLEY) 685x587x off sets of runners at 75mm centres R TRAY CLEARING TROLLEY 505x505x1800 Overall size suit tray size, Single bay with a single tray per runner R x505x1700 Overall size to suit tray size, Single bay with two trays per runner R x785x1700 Overall size to suit tray size, Double bay and two trays per runner R DISH RACK DOLLEY 510x535x850 To accommodate standard 500x500mm dishwasher racks R BACK TO MAIN
6 SINKS STANDARD INSTIUTIONAL PREP. SINKS 1,2mm thk 304 top - 1,6mm thk backing epoxied, 42mm dia s/s legs with die cast alum adj. feet 500x500x230mm deep bowl Add on 20% for 1.6mm Thk. 304 top 1050x650x910mm high Single bowl 500x500x230mm deep R x650x910mm high Single bowl 500x500x230mm deep R x650x910mm high Single bowl 500x500x230mm deep R x650x910mm high Single bowl 500x500x230mm deep R x650x910mm high Single bowl 500x500x230mm deep R x650x910mm high Double bowl 500x500x230mm deep R x650x910mm high Double bowl 500x500x230mm deep R x650x910mm high Double bowl 500x500x230mm deep R Standard sink bowl 500x500x230mm deep R STANDARD INSTITUTIONAL POT SINKS 900x650x910mm high Single bowl 600x500x380mm deep R x650x910mm high Single bowl 600x500x380mm deep R x650x910mm high Single bowl 600x500x380mm deep R x650x910mm high Double bowl 600x500x380mm deep R x650x910mm high Double bowl 600x500x380mm deep R Standard sink bowl 600x500x380mm deep R COMBINATION VEG. PREP. SINK 1850x650x910mm high 1off bowl 500x500x230mm & 1 off 600x500x380mm R mm sink 1050mm sink 1650mm sink 1800mm sink 2000mm sink 2250mm sink 2350mm sink UNDER SHELVES FOR SINKS Solid Galv. Slatted Galv. Solid S/S Slatted S/S R 198 R 275 R 412 R 433 R 430 R 416 R 639 R 696 R 399 R 513 R 797 R 842 R 471 R 778 R R R 440 R 463 R 505 R 775 R 861 R 993 R 965 R R R R R EXTRAS FOR SINKS Splashguard to one side of sink R 270 Splashguard to both sides of sink R 539 Set of castors 2 off fixed and 2 off swivel with brakes, 125mm diameter R Stainless steel chute R Stainless steel drawer with stainless steel telescopic drawer slides. R Locking plates for a lockset R 104 Pair of stainless steel legs with die cast adjustable feet R 511 Pair of stainless steel legs with plastic adj. feet R 511 Pair of epoxy coated mild steel legs with die cast aluminium adj. Feet R 364 Pair of epoxy coated mild steel legs with plastic adj. Feet R 316 Polypropylene cutting board, 300mm wide x 20mm thick with s/steel fixing bushes R Holes in splash back for taps (2 off) R mm diameter veg prep sink bowl fitted R 582 SPECIAL SIZE SINK Take the price of the shorter listed price of the sink and add R 102 per 50mm Take the price of the shorter listed price of the under shelf and add R 42 per 50mm BACK TO MAIN
7
8 TABLES STANDARD INSTITUTIONAL TABLES 1,2mm thk 430 top - 1,6mm thk backing epoxy, 42mm dia s/s legs & die cast alum adj. feet Add on 18% for 304 top 800x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R x650x910mm high With 150mm high splash back R x750x910mm high With - out 150mm high splash back R mm table 1050mm table 1650mm table 1800mm table 2000mm table 2250mm table 2350mm table UNDERSHELVES FOR TABLES Solid Galv. Slatted Galv. Solid S/S Slatted S/S R 198 R 430 R 399 R 471 R 275 R 416 R 513 R 778 R 412 R 639 R 797 R R 433 R 696 R 842 R R 440 R 775 R 965 R R 463 R 861 R R R 505 R 993 R R EXTRAS FOR TABLES Splashguard to one side of table R 266 Splashguard to both sides of table R 530 Set of castors 2 off fixed and 2 off swivel with brakes, 125mm diameter R Stainless steel chute R Stainless steel drawer with stainles steel telescopic drawer slides. R Locking plates for a lockset R 103 Pair of stainless steel legs with die cast adjustable feet R 501 Pair of stainless steel legs with plastic adj. feet R 501 Pair of epoxy coated mild steel legs with die cast aluminium adj. Feet R 357 Pair of epoxy coated mild steel legs with plastic adj. Feet R 311 Polypropylene cutting board, 300mm wide x 20mm thick with s/steel fixing bushes R Holes in splashback for taps (2 off) R mm diameter veg prep sink bowl fitted R 571 SPECIAL SIZE TABLE Take the price of the shorter listed price of the table and add R 102 per 50mm Take the price of the shorter listed price of the under shelf and add R42 per 50mm
9 DISHWASHING TABLES 1,2mm thk 304 top - 1,6mm thk backing epoxy coated, 40x40mm s/s sq. tubing legs with die cast aluminium adjustable feet. Add on 17% for 1.6mm Thk. 304 top Up to 650mm wide x 600mm long Inlet & outlet tables R Up to 650mm wide x1200mm long Inlet & outlet tables R Up to 650mm wide x1500mm long Inlet & outlet tables R Up to 650mm wide x1700mm long Inlet & outlet tables R Up to 650mm wide x2000mm long Inlet & outlet tables R Up to 650mm wide x 2200mm long Inlet & outlet tables R Up to 1050mm wide x 600mm long Dump table R Up to 1050mm wide x1200mm long Dump table R Up to 1050mm wide x1500mm long Dump table R Up to 1050mm wide x1700mm long Dump table R Up to 1050mm wide x2000mm long Dump table R Up to 1050mm wide x 2200mm long Dump table R EXTRAS FOR DISHWASHING TABLES 450x450x230mm Single bowl pre - wash sink bowl R x450x230mm Double bowl pre - wash sink bowl R Raised splashguard for single bowl sink, with tap holes R 933 Raised splashguard for double bowl sink, with tap holes R Scrap hole with rubber bung R 742 Rubber bung only R 231 Scrap hole only R 254 Hole for waste disposer including welding R Pre - rinse spray with mixer tap (T & S) R Pre - rinse spray with mixer tap (BCE) R Mixer tap only R 765 SHELVING FOR DISHWASHING TABLES Cantilevered overhead basket shelf, wall/table mount (one sided) up to 1000mm R For every additional metre R 855 Mushroom overhead basket shelf, wall or table mount (double sided) up to 1000mm R For every additional metre R Basket runners under (1 off bay with 3 off sets of runners) baskets stored horizontally R 837 Basket runners under (2 off bays with 3 off sets of runners) baskets stored horizontally R Baskets stored under in a vertical position up to 1000mm R 263 For every additional metre R mm table 1050mm table 1650mm table 1800mm table 2000mm table 2250mm table 2350mm table Solid Galv. Slatted Galv. Solid S/S Slatted S/S R 198 R 430 R 399 R 471 R 275 R 416 R 513 R 778 R 412 R 639 R 797 R R 433 R 696 R 842 R R 440 R 775 R 965 R R 463 R 861 R R R 505 R 993 R R SPECIAL SIZE DISHWASHING TABLE Take the price of the shorter listed price of the table and add R 102 per 50mm Take the price of the shorter listed price of the under shelf and add R 42 per 50mm
10 BACK TO MAIN
11 SHELVING AND RACKING MODULAR AND ADJUSTABLE FREE STANDING SHELVING Stainless steel 1.2mm thick s/s - 850x500mm shelf R mm thick s/s - 850x500mm shelf R mm thick s/s x500mm shelf R mm thick s/s x500mm shelf R x40x3mm thick 304 s/s post, 1650mm long R x40x3mm thick 304 s/s post, 1950mm long R x40x1.2mm thick 304 s/s post, 1650mm long R x40x1.2mm thick 304 s/s post, 1950mm long R x40x1.2mm thick 430 s/s post, 1650mm long R x40x1.2mm thick 430 s/s post, 1950mm long R 254 Galvanised 1.2mm thick galvanised shelf - 850x500mm R mm thick galvanised shelf x500mm R x40x3mm thick zinc plated post, 1650mm long R x40x3mm thick zinc plated post, 1950mm long R 214 WALL MOUNTED SHELVING Stainless steel solid wall shelving, 400mm wide, including brackets Up to 1000mm R 792 For every additional metre R 573 Stainless steel slatted wall shelving, 400mm wide Up to 1000mm R 940 For every additional metre R 717 Additional stainless steel brackets T - shaped for wall Price per each R 307 POT RACK All Stainless steel, 4 tier pot rack, 1200x600x1430mm high R Stainless steel frame with galv slats, 4 tier pot rack, 1200x600x1430mm high R Set of 4 off swivel castors fitted, 125mm diameter R DUNNAGE RACKS All Stainless steel dunnage rack, 900x600x150mm high R All Stainless steel dunnage rack, 900x600x300mm high R Stainless steel with galvanised slatted dunnage rack, 900x600x150mm high R Stainless steel with galvanised slatted dunnage rack, 900x600x300mm high R 1 090
12 SPECIALS STAINLESS STEEL CAPPING STRIPS 1.2mm Thick type 430 stainless steel, brushed & PVC finish (max 150mm wide) R 134 Maximum cut size 2000x150mm Installation R 46 / m STAINLESS STEEL KICK PLATES 0.9mm thick stainless steel, brushed & PVC finish - 50mm high R 42 / m 0.9mm thick stainless steel, brushed & PVC finish - 100mm high R 79 / m 0.9mm thick stainless steel, brushed & PVC finish - 150mm high R 119/ m Installation R 27/m STAINLESS STEEL CLADDING AND PUSH PLATES 0.9mm thick stainless steel, BA finish with PVC R 609 / m2 1.2mm thick stainless steel, BA finish with PVC R 812 /m2 Installation R 88 / m2 STAINLESS STEEL & ALUMINIUM LEGS 19.1mm diameter stainless steel round tubing R mm diameter stainless sterel round tubing R mm diameter stainless steel round tubing R mm diameter stainless steel round tubing R mm diameter stainless steel round tubing R mm solid aluminium rod R 538 / m 50mm solid aluminium rod R x 3mm thick aluminium tubing R 335 Solid stainless steel end cap for a 45mm diameter pipe R 335 Solid stainless steel end cap for a 50mm diameter pipe R 364 STAINLESS STEEL BALLUSTRADES & BARRIER RAILS 50.8mm diameter stainless steel posts with base plates & 50.8mm diameter top rail. No intermediate R 758 / m Single intemediate of 19.1mm diameter R 893 / m Double intemediate of 19.1mm diameter R 982 / m Triple intermediate of 19.1mm diameter R 1097 / m Rolling of pipes only R 447 Stainless steel flanges 80mm diameter x 3mm thick for 38mm pipe Stainless steel flanges 80mm diameter x 3mm thick for 50.8mm pipe R 57 ea R 57 ea STAINLESS STEEL CANTEEN TYPE BALLUSTRADES Twin tube construction with a 38.1mm diameter ball type stanchion, 4.5mm thick R 943 base plates, end closures and 31.7mm diameter rails N Extras An additional stanchion with base plate R 399 An additional 31.7mm diameter top and centre rails (priced per linear metre) R 127 / m An additional 31.7mm diameter 90 degree closures R 215 An additional 31.7mm diameter 135 degree bend R 131 STAINLESS STEEL FOOT RAIL 50.8mm diameter stainless steel foot rail with 16mm diameter posts with R 891 flanges up to 200mm high (excludes installation) CUTTING AND BENDING OF PLATES Cutting of plate up to 6mm thick mild steel & 3mm thick stainless steel Bending of plate - maximum 2000mm long x 3mm thick R 15 / cut R 15 / bend
13 BENDING OF TUBING Round sections Set-up Per Bend 19.1mm dia x 1.2mm thick - C/L radius of 47.5mm R 174 R mm dia x 1.2mm thick - C/L radius of 63.5mm R 174 R mm dia x 1.2mm thick - C/L radius of 79.25mm R 174 R mm dia x 1.5mm thick - C/L radius of 127mm R 174 R 61 Square sections Set-up Per Bend 25x25x1.2mm thick - C/L radius of 62.5mm R 174 R 49 40x40x1.5mm thick - C/L radius of 62.5mm R 174 R 63 Material cost R 58 R 78 R 94 R 175 Material cost R 101 R 184
14
15 MISCELLANEOUS 1/1 x 0.9mmm thick type 304 stainless steel solid baking sheet R 215 1/1 x 0.9mmm thick type 304 stainless steel perforated baking sheet R 462 2/1 x 0.9mmm thick type 304 stainless steel solid baking sheet R 516 2/1 x 0.9mmm thick type 304 stainless steel perforated baking sheet R 743 Long handle "pap" issuing spade R 109 Short handle "pap issuing spade R 99 Pizza spades all s/s R 208 Chip dump table complete with 3 off plastic bins R x600x500mm high mixer or dishwasher stand R CONVEYORS 1.6mm thick brushed stainless steel top, motor, idle roller with adjustment, food quality belt or 12mm diameter twin poly cord, pre wired splash proof distribution board, 1 off stop start switch, 1 off emergency stop, a variable speed control, valance panels, removable covers to both ends (idle roller end and the motor end) and a proximity switch Conveyor 1000mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R mm long x 600mm wide R Additional s/s (top priced per 100mm) R degree bend (for a poly cord only) R Extras Splashproof 16 amp plug point (each) R Phase plug point R 930 Additional motor (each) R Additional idle roller (each) R Bumper rail (per metre) R 190 Foot pedal control (each) R Emergency stop R 310 Stop / Start switch R 310 Proximity switch R 1 055
THE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationARTS AND CRAFTS 10.1.0. 5410 (open) 5412 (doors) H : 84" Tote Tray Storage. Damp Storage. Tote Tray Storage. Notebook Board Storage, Doors
Drawing Board Storage, Open Drawing Board Storage, Doors Drawing Board Storage Notebook Storage, Open 1670 D : 23.25" holds 32 drawing boards 1 shelf, adjustable on 1¼" increments maximum board height
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN
ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationHow you select and where to install me! Kitchen BE CAREFUL OF FOLLOWING PARAMETERS : A- Plumbing space needed (specifically the height).
Environment, recycling, selective collect Today, to convert a house to recycling, a house should have necessary methods and tools. Richelieu, always ahead of practical solutions, offers management and
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationSchedule of Maintenance Fees
Schedule of Maintenance Fees Effective July 1, 2015 It is the policy of the Housing Authority of Murray not to charge for NORMAL wear and tear. However, the Housing Authority reserves the right in every
More informationTHE FIRST OF A NEW CLASS OF PRODUCTS
THE FIRST OF A NEW CLASS OF PRODUCTS The first of a new class of truly unique products Rational Production has created a new, advanced class of products with improved characteristics, commencing with
More informationTel: 0800 975 4933 Sales: sales@avantauk.com STORAGE CABINETS. PREMIERSHIELD anti-bacterial powder coating system. quality products made in the UK
Tel: 0800 975 4933 Sales: sales@avantauk.com STORAGE PREMIERSHIELD anti-bacterial powder coating system quality products made in the UK MEDIUM DUTY : 88 SERIES PREMIER BDU DESK UNITS: 88 SERIES Of welded
More informationBUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS
BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE
More informationwww.steelformcatering.com
www.steelformcatering.com catering cat e r i n g We are specialized in the production and sub furniture of components for mechanical industry, sector for which we even furnish advice and collaborate in
More informationBase Cabinet with Self-storing Folding Doors and Floor
Usable Kitchens When designing a kitchen for use by persons with mobility impairments, especially those who use wheelchairs, careful layout of the kitchen is crucial to maintaining accessibility. People
More informationPART-II (COMMERCIAL / PRICE BID) DESIGN, SUPPLY AND INSTALLATION OF CUSTOMIZED STEEL LAB FURNITURE.AT N.C.C.S., PUNE
(An Autonomous Institution of the Department of Biotechnology, Govt. of India) N.C.C.S. Complex, Ganeshkhind, Pune University Campus, Pune 411007. PART-II (COMMERCIAL / PRICE BID) DESIGN, AND INSTALLATION
More informationModular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com
System Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com Christensen Manufacturing Corp., Pennington, NJ 08534 System Modular Truck Equipment Tradesman Package SPECIAL SAVE
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationPLASTIC CONTAINERS CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS
CONTAINER HOLDING TROLLEYS CONTAINER HOLDING CABINETS PLASTIC DRAWER UNITS DRAWER UNIT HOLDER SHELVES FOOD CONTAINERS INDUSTRIAL CONTAINERS 64 CONTAINER HOLDING TROLLEYS for the coloured containers always
More informationOVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave
More informationCATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI
CATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI The Company Founded in 1973 by Mr Imes Tinti in association with his son Vanni Tinti. In 1999 the locksmith workshop became a modern industrial company
More informationIntegral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
More informationOffice of the Chief Procurement Officer Page 1 BID NUMBER RT24-2016
Office of the Chief Procurement Officer Page 1 ITEM RT24-01-001 DESCRIPTION Bowl, kidney dish and measuring jug Bowl Medical Stainless steel To comply to the latest issue of SANS 417, subsection 4 and
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More information0WKM070002 KENWOOD "EU" KM070 KENWOOD COOKING CHEF *901.400. 901400 ev ol 2012/06
*901.400 KENWOOD COOKING CHEF 1 2 3 4 5 6 63 43 44 45 46 29 13 40 42 7 8 39 9 38 11 37 49 50 47 10 53 14 15 16 54 17 21 18 19 36 35 34 55 56 57 22 20 23 33 28 62 60 58 27 26 59 61 25 24 76 108 107 103
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationVBRC410 : 001 - MAIN ASSY [1/8]
VBRC410 : 001 - MAIN ASSY [1/8] Page 1 of 16 VBRC410 : 001 - MAIN ASSY [1/8] Ref # Part Number Qty. Description 1 PW300304 LARGE END CAPS 2 PW300305 SUB TO PW300349 - MINI BRACKET/TUBE ASSEMBLY-CHRO 3
More informationSTORAGE DESIGN LIMITED
Cupboards Cubio have a huge capacity and are available in two types. Standard duty storage are designed to allow organised storage of parts and tools in a range of plastic bins on adjustable shelves. Heavy
More informationILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
More informationOVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.
More informationALUMINIUM SYSTEMS S.A.
ΡΟΛΑ ΑΠΛΑ και ΘΕΡΜΟΜΟΝΩΤΙΚΑ NORMAL & THERMAL INSULATING ROLLER SHUTTERS ALUMINIUM SYSTEMS S.A. ALUMINIUM SYSTEMS S.A C.AL.COM,.,,,.,,.. C.AL.COM. C.AL.COM. About us C.AL.COM is a modern dynamic commercial
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationglass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
More informationSurface Water Drainage Products
Surface Water Drainage Products Surface Water Drainage Products Reln Rain Drain 1m Lengths (Internal dimensions 100mm x 100mm) 118mm 100mm 100mm 128mm 1m 001134 001133 001200 001188 001195 001190 001143
More informationRittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS
Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow
More informationCabinets 101: Configuring A Network Or Server Cabinet
Cabinets 101: Configuring A Network Or Server Cabinet North, South and Central America White Paper May 2012 www.commscope.com Contents Background Information 3 What is a network or server cabinet? 3 What
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationRack Cabinets. Rack Configuration. 19 inch
Rack Cabinets Rack Configuration 19 inch 19 RACK COMPONENTS FEATURES Hallam Manufacturing s range of 19 inch racks and cabinets for today s data/communications installations are designed and manufactured
More information19" GERMANY EXPORT RACK QUALITY PRODUCT FOR THE BEST WORK NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN
NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN AC SOCKET STRIP (AC Power Distribution) BLANK PANELS x U OPEN RACK THERMOSTAD PANEL SET CABLE MANAGEMENT PANEL WITH COVER BAYING
More informationTOP AND CABINET PARTS
TOP AND CABINET PARTS AUTOMATIC WASHER 9 06 Printed in U.S.A. (drd) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts 8182271 Use & Care Guide 8182277 Tech Sheet 8182614 Energy Guide 8182196 Quick
More informationWorkspace and storage furnishings
LISTA Compact Workspace and storage furnishings Test and inspection workstations With its modular test and inspection workstations, LISTA offers optimised solutions for modern quality assurance practices.
More information19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.
19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile
More informationZARGES carts, shelving system and logistics for healthcare coordinated solutions for your facilities.
ZARGES carts, shelving system and logistics for healthcare coordinated solutions for your facilities. Fine planning for cupboard systems Planning for central storerooms Spatial planning Implementation
More informationPowerware Enclosure Solutions Product Focus
Powerware Enclosure Solutions Product Focus Powerware Enclosures IT availability and reliability are critical corporate issues in today s demanding, mission-critical environments. For this reason, it is
More informationBEDFORD DORMOBILE PARTS LIST JUNE 2016
BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour
More informationCORNER FRIDGE REFRIGERATION UNIT INSTALLATION AND OPERATION INSTRUCTIONS
CORNER FRIDGE REFRIGERATION UNIT INSTALLATION AND OPERATION INSTRUCTIONS D E F Y I N G C O N V E N T I O N Congratulations on your new Corner Fridge Your new corner fridge may have different functions
More informationRetail Reception kiosk
Retail Reception kiosk put 42" corner post in below 66" to allow post to extend above kiosk for raised box sign Mini cantilever option - 24" overhead support leg Mini cantilever option - 24" overhead 66/48E
More informationOVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel)
OVEN PARTS 30" BUILT IN ELECTRIC OVEN SELF CLEAN 10 04 Litho in U.S.A.(cre) 1 Part No. OVEN PARTS 1 Literature Parts LIT8300654 Installation Instructions LIT8300772 Use & Care Guide (Oven) LIT8301758 Tech
More informationIntexma Graphics (Pty) Ltd
Intexma Graphics (Pty) Ltd Distributors for the complete supply of signage materials comprising of single and double roll up stands, banner walls, point of sale tables, signage boards and light boxes.
More informationHardigg Cases Prisliste
Produkt nr. Produkt beskrivelse Salgspris Dkk. Ekskl. moms og fragt Rotationally Moulded "Single Lid" AL Containers Standard Single Lid Containers come with Zinc-Plated hardware and plastic handles. Upgrade
More informationCNC Tool Storage Solutions
Solutions CNC TOOL STORAGE SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationL_PTL12_C01_E_P_TOKIOK_L_PTL12_C01_E_P_TOKIOK 01.08.11 11:50 Seite 17. Leonard Hausgeräte 2012 Leonard domestic appliances 2012
L_PTL12_C01_E_P_TOKIOK_L_PTL12_C01_E_P_TOKIOK 01.08.11 11:50 Seite 17 Leonard Hausgeräte 2012 Leonard domestic appliances 2012 Vorlage Druck QMI L_PTL12_C01_E_P_TOKIOK_L_PTL12_C01_E_P_TOKIOK 01.08.11 11:50
More informationEXPLORE 4-Leg Teaming Table with Screen Share Assembly Instructions
EXPLORE 4-Leg Teaming Table with Screen Share Monitor Display Requirements: your flat panel display must confirm to the following requirements. y With the stand removed, the monitor must not exceed 40
More informationPUBLIC RESTROOMS, DESIGN INTENT
PUBLIC RESTROOMS, DESIGN INTENT 1.01 STRUCTURAL A. Where feasible, metal stud partitions will be constructed on a 6 high concrete curb. 1.02 MECHANICAL A. Restrooms will have a minimum of 15 air changes
More informationDIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS
DIRECTIONS FOR ASSEMBLING BASE & WALL CABINETS TheRTAStore.com STEP 1: CLEAR A WORK SPACE Place your RTA cabinet panels on a smooth, scratch resistant surface in a large, open area. (Some people like to
More information367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
More informationDIGITAL WARMING CABINETS
DIGITAL WARMING CABINETS INSTALLATION-OPERATION-MAINTENANCE USER MANUAL Mac Medical 820 S Mulberry St. Millstadt, IL 62260 California OSHPD Pre-approved (618) 476-3550 phone (618) 476-3337 fax December
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationThe Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
More informationRefrigerators - Freezers. Ekofrigolab & Ekobasic Series
Refrigerators - Freezers Ekofrigolab & Ekobasic Series Angelantoni Life Science S.r.l. manufactures a wide range of refrigerated cabinets and combined refrigerator/freezer cabinets. We offer high reliability
More informationAlso special and personalized items with logo for various applications are realized at short notice.
Product Catalogue 2015 Index Stöckel products are manufactured by the fourth generation in the family run enterprise in Northern Germany. We produce on modern machinery with environmentally production
More informationOne Year Warranty. Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches NATURAL GAS* Six Year Warranty
One Year Warranty ELECTRIC Stock U.S. # of Volts Weight CONN. Height Dia. Watts # GAL. Elements INS. Inches Fused Ceramic Shield tank lining is corrosion-resistant for years of dependability. Adjustable
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationWren Kitchens Installation Tips... 3. Carefully check your kitchen delivery... 4. Measuring out and marking up... 5. Fitting the base cabinets...
tra 1 Index Wren Kitchens Installation Tips... 3 Carefully check your kitchen delivery... 4 Measuring out and marking up... 5 Fitting the base cabinets... 6 Fitting the corner cabinets... 7 The 972mm or
More informationCheshunt Fabrications Ltd
Cheshunt Fabrications Ltd Unit 9a & 9b, Quickbury Farm Hatfield Heath Road Sawbridgeworth Hertfordshire CM21 9HY Phone: 01279 600866 Fax: 020 8609 0050 01279 600868 www.fabber.co.uk Quality in the making
More informationDishroom Equipment Catalogue
Dishroom Equipment Catalogue Contents Dishwashing baskets 500 x 500 mm... 4 Plate cassettes... 5 Dishwashing baskets 460 mm system... 6 Dishwashing baskets 460 x 460 mm... 8 Cutlery handling... 9 Kitchen
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationGo-kart for little race-drivers
Go-kart for little race-drivers Drill and drive. Go-kart What it lacks in speed, it more than makes up for in fun: the go-kart will excite little race-drivers. 1 Introduction It s only a go-kart, but it
More informationAlpha System ADAPTABLE KEWAUNEE LABORATORY FURNITURE. encouraging new discovery
Alpha System ADAPTABLE LABORATORY FURNITURE KEWAUNEE encouraging new discovery Alpha 6 partition modules with Kemresin worktops. Minneapolis, Minnesota Alpha 6 partition modules with Alpha overhead service
More informationInner size of S.S. tank: 50cm x 35cm x 25cm.
Heat & Cold Therapy Equipments We have quality products in Heat & Cold Therapy equipments. All our models are efficient and display quality in Physiotherapy Equipments. IMI - 2515: PARAFFIN WAX BATH (Arm,
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions SOLUTIONS Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes
More informationPortable Displays & Accessories
Portable Displays & Accessories Transcity Exhibitions Ltd 198 Churchill Way Biggin Hill Airport Kent TN1 3BN t: 0199 74100 f: 0199 74104 e: office@transcityexhibitions.com contents... Roller Banner Stands
More informationBOQ for Plumbing, Sanitary Works
BOQ for Plumbing, Sanitary Works Page 1 of 6 Sr.No Item Description Quantity Unit Rate Amount (Rs.) 1 SANITARY FIXTURES Providing & Fixing star white colour vitreous china wall mounted wc with 1a heavy
More informationFredriksons conveyor systems handle goods with a width from 20 mm up to 600 mm.
Conveyor Solutions Whatever your logistic needs, we can offer a conveyor solution. Our flexible systems primary and secondary packaging for single and multi packages, can transport your goods from one
More informationMorgue refrigeration unit
Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site
More informationUNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationDIY CABINET REFACING INSTALLATION GUIDE
DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products
More informationCNC Tool Storage Solutions
CNC Tool Storage Solutions Thanks to the flexibility of the CNC line, your tools will be protected during regular handling, transportation and storage. The Rousseau CNC tool rack distinguishes itself in
More informationTECHNICAL DATA E-PRO COLD UNITS Refrigerated glass display units, CDDL, CDD and CDDH series
TECHNICAL DATA E-PRO COLD UNITS Refrigerated glass display units, CDDL, CDD and CDDH series The range of E-Pro cold units includes various types of refrigerated units and worktops. Thanks to the flexible
More informationOVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.
Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such
More informationSolar Hot Water Heaters
Solar Hot Water Heaters Three High Vacuum Water inlet Stainless Steel screw Gel seal and insulation Water outlet Dust proof seals Non Pressure Models Details ASWH-1b ( Color Painted 304 ) ASWH-1c ( stainless
More informationHampers and Supply Carts. Making Health Care Mobile For Over 25 years 1.800.433.0348
Hampers and Supply Carts Making Health Care Mobile For Over 25 years 1.800.433.0348 We work closely with nurses, EVS, and linen services to develop ergonomic solutions for each hospital s unique service
More information// EXHIBITION SYSTEMS
// EXHIBITION SYSTEMS COUNTERS & BAGS Mills Media Ltd 2 Morpeth Wharf Twelve Quays Wirral CH4 LF t: 05 649 3600 f: 05 649 3700 www.millsmediagroup.com Portable {Furniture} All Products All Products on
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationTRIMMING TECH 150. IVD In vitro diagnostic-medical device. General information. Technical datasheet Trimmingtech150
IVD In vitro diagnostic-medical device CND code: W0202059016 - CIVAB code: TRIMMING TECH 150 General information Type of instrument: Aspirated hood for histology. Model: Trimming Tech 150. Code: Description:
More informationHow to build a Pizza Oven in 4 days
How to build a Pizza Oven in 4 days Preparation day (slab) 1. Foundation 1500 deep x 1300 wide x 75mm deep Required 20 bags cement pre mix. If you already have a concrete base, you save this prep day DAY
More informationSECTION 08332 COILING COUNTER DOORS. Display hidden notes to specifier. (Don't know how? Click Here)
SECTION 08332 COILING COUNTER DOORS Display hidden notes to specifier. (Don't know how? Click Here) PART 1 GENERAL 1.1 SECTION INCLUDES A. Coiling Metal Counter Doors. B. Coiling Counter Fire Doors. 1.2
More informationSafety. Fire Resistant. Gas Cylinder
All Cabinets Ship Flyer CAB09...Many in 48 hrs. Heavy Duty All Welded CABINETS 31 Models Safety Fire Resistant Spill Containment Gas Cylinder Made in USA Distributed By: Our Quality Serves You Longer JAMCO
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationCarton - Straight Link Machine Chain (Order Unit is Feet )
Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),
More informationIBC Tote Containment Sumps
IBC Tote Containment Sumps DENIOS Provides More Models- and More Variety of IBC Totes Sumps than any other Manufacturer Painted, Galvanized, Stainless Steel, and Poly models available Models provide storage
More information50AI01oe 02/15. Labko GRP cesspools. Instructions for installation, operation and maintenance
02/15 Labko GRP cesspools Instructions for installation, operation and maintenance Reliable solutions Wastewater treatment systems Contents 1 LABKO CESSPOOLS... 3 1.1 GENERAL... 3 1.2 IMPORTANT TO KNOW
More information1.1 DIMENSIONS AND WEIGHT PAG. 2 1.2 LOAD CENTRE FOR LIFTING PAG. 2 1.3 STORAGE CONDITIONS PAG. 2
TRANSPORT AND INSTALLATION. DIMENSIONS AND WEIGHT PAG.. LOAD CENTRE FOR LIFTING PAG..3 STORAGE CONDITIONS PAG. STARTING. INSTALLATION PAG.. SPACE REQUIREMENTS PAG. 3.3 ELECTRIC CONNECTION PAG. 3 3 DESCRIPTION
More informationcontents classic 3 switch 4 mini swing 5 sign wedge 6 chalkboards 7 all purpose A frames 8 H2O swingmaster 9 café banner 10 vision 11
the sign selection pavement swing signs pavement foil signs A boards forecourt signs pavement banner stand systems A frame banners promotion units snapframe signage suspended poster rails contents PAVEMENT
More informationSSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
More informationUNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
More informationREDFYRE CENTRAL-HEATING COOKER (OIL & GAS FIRED)
REDFYRE CENTRAL-HEATING COOKER (OIL & GAS FIRED) MODELS 0, 80, 00, 20 PARTS LIST AUGUST 202 A REDFYRE CENTRAL HEATING COOKER ---- TOP - PLATE & LIDS 2 REDFYRE CENTRAL HEATING COOKER ---- TOP - PLATE &
More informationPaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More informationPark View Place. Compass. House. Royal Wharf Gardens Endeavour. House. Thameside. Sienna. House. House. Apartments Townhouses.
The Townhouses Park View Place A A Compass House A T T T Royal Wharf Gardens Endeavour House T A A Thameside House T Sienna House A A A A T Apartments Townhouses River Thames Compass House Compass House
More informationUFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
More information