Solution Overview. HP Server Solutions

Transcription

1 Solution Overview HP Server Solutions Note: This webpage describes nonvirtualized appliance support for HP servers. For virtualization support, refer to Cisco supports software applications from the Cisco Unified Communications portfolio that install on specific configurations of customer-provided HP DL380-G6 and DL320-G5p servers. Available applications include: Cisco Unified Communications Manager, Cisco Emergency Responder, Cisco Unified Application Environment, Cisco Unity meeting applications, Cisco Unity Connection, Cisco Unified Presence, Cisco Unified Mobility Advantage, Cisco Unified MeetingPlace conferencing, Cisco Unified MeetingPlace Express, Cisco Unified Contact Center Express, Cisco Unified Contact Center Enterprise and Hosted, Cisco Unified Intelligent Contact Management Enterprise and Hosted, Cisco Unified Customer Voice Portal, Cisco Unified IP Interactive Voice Response (IP IVR), Cisco Unified Intelligence Center, Cisco Unified Intelligence Suite, Cisco Unified Web Interaction Manager, Cisco Unified Interaction Manager, Cisco Unified Contact Center Management Portal, and Cisco Unified Expert Advisor. Cisco also supports the use of HP USB-attached tape drives as local backup devices. Refer to the HP Tape Drives section later in this document for details and ordering instructions. Customer-provided servers must exactly match the vendor, make, model, specifications, and parts lists in the configurations listed in the following sections to be supported. Deviations are not supported, and may result in an incomplete or failed install, or postinstallation problems. Customer-provided servers must also be on the certified hardware compatibility list for the intended software product and version. Where equivalent Cisco MCS 7800 Series Media Convergence Server model numbers are given, they should be interpreted as the configurations used by Cisco Unified Communications Manager. The same MCS model used for other applications (where the MCS model has a different suffix) may use different components and specifications. Contact your local Cisco account team for more details. Cisco no longer stocks memory and disk-drive components for end-of-sale Cisco MCS 7800 models. Please consult the parts lists in the Older Servers section later in this document to get the HP part numbers of these components, and procure them direct from HP. Remember to remove these parts if the Cisco Technical Assistance Center (TAC) ever performs a Return Material Authorization (RMA) on the Cisco MCS If HP no longer has these parts available, then consider migrating to either a newer appliance or a virtualized solution as described at Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 21

2 Cisco Approved Hardware Configuration Requirements Table 1 lists supported platforms for Cisco Unified Communications products listed previously. Note that the Cisco MCS 7816 and MCS 7828 do not have a software-only supported option. For additional details about platform support for the following Cisco Unified Communications products, please consult the following references: For Cisco Unified Communications Manager and Cisco Unified Communications Manager Session Management Edition supported releases by server, please visit: f9.html. For Cisco Emergency Responder, please visit the release notes at: For Cisco Unity Connection, please visit: For the Cisco Unity solution, please visit: ef.html. For Cisco Unified Mobility Advantage, refer to Ordering Information in the data sheet for Cisco Unified Mobile Communicator at: For Cisco Unified Contact Center Express, please visit: For Cisco Unified Contact Center Enterprise, refer to Appendix A of the bill of materials at: ml. For Cisco Unified Customer Voice Portal, refer to the Cisco Unified Customer Voice Portal hardware and software specifications at: For Cisco Unified Presence hardware and software compatibility information, please visit: For the Cisco Unified Communications Management Suite, please visit: Please contact HP for hardware options for rack-mount kits, power supplies, and power cords Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 2 of 21

3 Table 1. Currently Supported Hardware Configurations Customer-Provided HP Hardware Configuration (equivalent to Cisco MCS 7800 model or generation) Equivalent Hardware-Only Cisco MCS 7800 Model or Generation Product IDs HP Label HP Part Number DL380-G6 Server 1 Quad-Core Intel 2.00Ghz Nehalem E5504 Processor 4GB RAM 2x 300GB Hard Drives Equivalent to Cisco MCS Check above references for further detail on supported applications. Not applicable AX692A For details, or to order, see solutions DL380-G6 Server 1 Quad-Core Intel 2.53Ghz Nehalem E5540 Processor 6GB RAM 4x 300GB Hard Drives Equivalent to Cisco MCS 7845 for Cisco Unified Communications Manager. Check above references for further detail on supported applications. Not applicable AX691B For details, or to order, see solutions DL380-G6 Server 2 Quad-Core Intel 2.53 Ghz Nehalem E5540 Processor 8GB RAM 4x 300GB Hard Drives Equivalent to Cisco MCS 7845 for Cisco unified messaging and contact center applications. Check above references for further detail on supported applications. Not applicable AX693A For details, or to order, see solutions DL320-G5p Server Single Intel E GHz Processor 2G RAM 2x 500GB Hard Drives Previously also sold as: MCS-7825-H4-IPC1 MCS-7825-H4-RC1 MCS-7825-H4-CCX1 MCS-7825-H4-CCE1 MCS-7825-H4-ECS1 MCS-7825-H4-MOB1 Check above references for further detail on supported applications. Previously also labeled as: MCS-7825-H4 MCS-7825-H4-ECS1 AT982B For details, or to order, see solutions Ordering Instructions from HP Customers must use the HP provided bundle part numbers in Table 1, and they must follow the HP-provided ordering instructions at These special HP original-equipment-manufacturer (OEM) configurations are for Cisco only, and are not likely to be available through HP standard customer, reseller, or distributor resources. Older Servers If you are using older Compaq or HP servers and want to upgrade to newer software releases, refer to Table 2 for a list of older configurations that are still supported. Note that HP has discontinued these models and you can no longer purchase them from HP or its resellers. Please contact your local Cisco account team for information about replacement models and ordering assistance. Please note that end-of-sale Cisco MCS 7800 server models are still fully supported by the Cisco TAC (for troubleshooting, dispatch, repair, and replacement) until the end-of-support date. End-of-sale server models are also still supported for software upgrades per the compatibility matrices provided with Table Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 3 of 21

4 Table 2. Older Supported Hardware Configurations (not shipping) Customer-Provided HP Hardware Configuration (equivalent to Cisco MCS 7800 model or generation) DL380-G6 Server 1 Quad-Core Intel 2.00Ghz Nehalem E5504 Processor 4GB RAM 2x 146GB Hard Drives DL380-G6 Server 1 Quad-Core Intel 2.53Ghz Intel Nehalem E5540 Processor 6GB RAM 4x 146GB Hard Drives DL380-G5 Server 2x Xeon GHz Processor 4G RAM 4x 146GB Hard Drives DL380-G5 Server 2x Xeon E GHz Quad-Core Processor 4G RAM 4x 146GB Hard Drives DL380-G5 Server 2x Xeon E GHz Quad-Core Processor 4G RAM 8x 146GB Hard Drives DL380-G5 Server Single Xeon GHz Processor 2G RAM 2x 146GB Hard Drives DL380-G5 Server Dual Xeon GHz Processor 4GB RAM 4x 72GB Hard Disk DL380-G4 Server Dual Xeon 3.4-GHz Processor 4GB RAM 4x 72GB Hard Disk DL380-G3 Server Dual Xeon 3.06-GHz Processor 4GB RAM 4x 72GB Hard Disk DL380-G2 Server Dual Xeon 2.4-GHz Processor 2GB RAM 4x 72GB Hard Disk DL380-G2 Server Dual Pentium III 1.4-GHz Processor 4GB RAM 4x 72GB Hard Disk DL380-G5 Server Single Xeon GHz Processor 2GB RAM 2x 72GB Hard Disk Equivalent Hardware-Only Cisco MCS 7800 Model or Generation Product IDs Not applicable (previously sold by HP as special part number AX690A). Not applicable (HP special part number AX691A updated to use newer disk drives). MCS-7845-H2-IPC2 MCS-7845-H2-CCX2 MCS-7845-H2-CCE2 MCS-7845-H2-MOB1 MCS-7845-H2-RC2 MCS-7845-H2-CCE3 MCS-7845-H2-ECS3 MCS-7845-H2-CCE4 MCS-7845-H2-ECS4 MCS-7835-H2-IPC2 MCS-7835-H2-RC2 MCS-7835-H2-CCX2 MCS-7835-H2-CCE2 MCS-7835-H2-ECS2 MCS-7845-H2-IPC1 MCS-7845-H2-CCE1 MCS-7845-H2-CCX1 MCS-7845-H1-IPC1 MCS-7845-H1-CC1 MCS-7845-H1-ECS2 MCS-7845-H1-ECS1 (4x72-GB and 2x144-GB hard disk configuration) MCS-7845H-3.0-IPC1 MCS-7845H-3.0-CC1 MCS-7845H-2.4-EVV1 MCS HW MCS-7835-H2-IPC1 MCS-7835-H2-CCE1 MCS-7835-H2-CCX Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 4 of 21

5 Customer-Provided HP Hardware Configuration (equivalent to Cisco MCS 7800 model or generation) DL380-G4 Server Single Xeon 3.4-GHz Processor 2GB RAM 2x 72GB Hard Disk DL380-G3 Server Single Xeon 2.4 or 3.0 GHz Processor 1GB RAM 2x 36GB Hard Disk DL380-G2 Server Single Pentium III 1.4-GHz Processor 1GB RAM 2x 18GB Hard Disk DL380-G2 Server Single Pentium III GHz Processor 1GB RAM 2x18GB Hard Disk DL380G1 Server Single Pentium III GHz Processor 1GB RAM 2x18GB Hard Disk DL320-G5 Server Single Intel 3050 Xeon 2.13-GHz 2GB RAM 2x 160GB Hard Disk DL320-G4 Server Single Intel GHz 2GB RAM 80GB Hard Disk DL320-G4 Server Single Pentium D 2.8-GHz 2GB RAM 80GB Hard Disk DL320-G3 Server Single Pentium GHz 2GB RAM 80GB Hard Disk DL320-G2 Server Single Pentium GHz 1GB RAM 40GB Hard Disk DL320-G2 Server Single Pentium GHz Processor 1GB RAM 40GB Hard Disk DL320-G1 Server Single Pentium III 1133-MHz Processor 1GB RAM 40GB Hard Disk DL320 Server Single Pentium III 800-MHz Processor 512MB RAM Equivalent Hardware-Only Cisco MCS 7800 Model or Generation Product IDs MCS-7835-H1-IPC1 MCS-7835-H1-CC1 MCS-7835-H1-ECS1 MCS-7835H-2.4-EVV1 MCS-7835H-3.0-IPC1 MCS NTD/TD MCS HW MCS HW MCS 7825-H3-IPC1 MCS-7825-H3-CCE1 MCS-7825-H3-CCX1 MCS-7825-H3-ECS1 MCS 7825-H2-IPC2 MCS-7825-H2-IPC1 MCS-7825-H2-CCE1 MCS-7825-H2-CCX1 MCS-7825-H1-IPC1 MCS-7825-H1-CC1 MCS-7825H-3.0-IPC1 MCS-7825H-3.0-IPC2 MCS-7825H-3.0-CC1 MCS-7825H-2.2-EVV1 MCS HW MCS HW 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 5 of 21

6 Customer-Provided HP Hardware Configuration (equivalent to Cisco MCS 7800 model or generation) 20GB Hard Disk Equivalent Hardware-Only Cisco MCS 7800 Model or Generation Product IDs Compaq DL320 Server with Pentium III 800-MHz Processor The DL320 is a high-performance server platform designed for today s unified communications applications. When clustered properly, 2,000 users can be supported. The required processor is an Intel Pentium III 800-MHz processor. No specific memory configuration is required as long as 512 MB of memory is provided. Note that HP has discontinued sale of this configuration. Table 3 is only for reference to help you identify which Table 3. Components of Compaq DL320 Quantity Compaq Part Number Description ProLiant DL Model-1 ATA B21 20-GB ATA/ RPM Drive 1 in B MB Registered 133-MHz SDRAM DIMM B MB Registered 133-MHz SDRAM DIMM B21 CD ROM/Diskette Assembly B21 Third-Party Cabinet Rack Kit (Optional) Compaq DL320 Server with Pentium III 1133-MHz Processor The DL320 is a high-performance server platform designed for today s unified communications applications. When clustered properly, 4,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can be supported. The required processor is an Intel Pentium III GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 4 is only for reference to help you identify which Table 4. Components of Compaq DL320 Quantity Compaq Part Number Description DL320R01 P A40G US B Reg. SDRAM DIMM 133 ALL B21 3rd Party Rack-Mount Kit (Optional) Compaq DL320-G2 Server with Pentium GHz Processor The DL320-G2 is a high-performance server platform designed for today s unified communications applications. When clustered properly, 4,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can be supported. The required processor is an Intel Pentium GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 5 is only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 6 of 21

7 Table 5. Components of Compaq DL320-G DL320R02 P3.06/ A1 US B21 512MB x 1 REG PC2100 DDR B21 40G 7.2K NHP ATA ALL B21 DL320/DL360 DVD/CDRW FLPY ALL B21 3rd PTYRK DL360G1/320 ALL (optional) (001) with the codes as follows: 011 = Australia, 291 = Japan, 421 = Europe, and 371 = ADP. HP DL320-G2 Server with Pentium MHz Processor The DL320-G2 is a high-performance server platform designed for today s unified communications applications. When clustered properly, 4,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can be supported. The required processor is an Intel Pentium GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 6 is only for reference to help you identify which Table 6. Components of HP DL320-G DL320R02 P3.06/ A1 US B21 512MB x 1 REG PC2100 DDR B21 40G 7.2K NHP ATA ALL B21 DL320/DL360 DVD/CDRW FLPY ALL B21 3rd PTYRK DL360G1/320 ALL (optional) HP DL320-G3 Server with Pentium GHz Processor The DL320-G3, which requires Cisco OS , is a high-performance server platform for today s unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 7 is only for reference to help you identify which Table 7. Components of HP DL320-G DL320R03 P3.4-1MB, 1GB, 80GB SATA B21 1GB UNREG PC3200 1X1GB Memory B21 80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1") B21 DL320G3 DVD-ROM Drive B21 DL320G3 FLOPPY DRIVE (Required for installation of SW SATA RAID) 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 7 of 21

8 HP DL320-G4 Server with Pentium D 2.8-GHz Processor The DL320-G4, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.0.3, is a high-performance server platform for today s unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel Pentium D 2.8-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7825-H2-IPC1. Note that HP has discontinued sale of this configuration. Table 8 is only for reference to help you identify which Table 8. Components of HP DL320-G or (Japan Only) DL320G4 P920 Model B21 1GB DDR II 533 MHz/PC B21 80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1") B21 DL320G3 DVD-ROM Drive HP DL320-G4 Server with Intel GHz Processor The DL320-G4, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.1.1, is a high-performance server platform for today s unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7825-H2-IPC2. Note that HP has discontinued sale of this configuration. Table 9 is only for reference to help you identify which Table 9. Components of HP DL320-G DL320G4 P950 A1 Server (includes 1 x 1-GB RAM) B21 1GB DDR II 533 MHz/PC B21 80-GB SATA 1.5-Gb 7,200-RPM Hard Drive (1") B21 DL320G4 DVD-ROM Drive HP DL320-G5 Server with Intel 3050 Xeon 2.13-GHz Processor The DL320-G5, which requires Cisco Windows OS , Cisco Windows OS , or Cisco Unified Communications Manager 6.0.1, is a high-performance server platform for today s unified communications applications. It supports up to 1,000 Cisco Unified IP Phones on a single server and up to 4,000 Cisco Unified IP Phones when clustered properly. The required processor is an Intel 3050 Xeon 2.13-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7825-H3. Note that HP has discontinued sale of this configuration. Tables 10 and 11 are only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 8 of 21

9 Table 10. Components of HP DL320-G B21 HP DL320G5 MOD-FX Svr L21 HP DL320G5 Xeon 3050 FIO Kit B21 HP 1GB UB PC x1GB KIT ALL B21 HP 160GB 1" 7.2K SATA 1yr Wty HDD B21 HP DL320G3/G4 DVD-ROM Drive OPT Table 11. Components of HP DL320-G5 if Ordered Directly from HP Reseller DL320 G5 X3050/1GB/80GB SATA B21 HP 1GB UB PC x1GB KIT ALL B21 HP 160GB 1" 7.2K SATA 1yr Wty HDD B21 DL320G4 DVD-ROM Drive Compaq DL380 Server with Pentium III 1000-MHz Processor The DL380 is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 users can be supported using the DL380 Pentium III 1000-MHz processor. The required processor is an Intel Pentium III 1-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 12 is only for reference to help you identify which Table 12. Components of Compaq DL380 Quantity Compaq Part Number Description ProLiant DL380R01 P1000/ B GB Pluggable Wide Ultra SCSI3 Universal 10K Drive B21 512MB Registered 133-MHz SDRAM DIMM B21 256MB Registered 133-MHz SDRAM DIMM B21 128MB Registered 133-MHz SDRAM DIMM DL Watt HP RPS Module B22 12/24-Gigabyte DAT Drive (DDS-3) -Opal (Optional) Compaq DL380 G2 Server with Pentium III 1266-MHz Processor The DL380-G2 is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified CallManager or Cisco Unified Communications Manager users can be supported. The required processor is an Intel Pentium III GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 13 is only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 9 of 21

10 Table 13. Components of Compaq DL380-G2 Quantity Compaq Part Number Description DL380R02 P US B GB Pluggable Ultra3 SCSI 10K rpm HDD B MB PC133-MHz ECC SDRAM Memory (2 x 512 MB) DL380 G2 Hot Plug Redundant Power Supply US B21 3rd Party Rack MTG Kit-DL380 (Optional) B21 20/40-GB DAT, HOT PLUG (Optional) HP DL380-G2 Server with Pentium III 1400 Processor The DL380-G2 is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Pentium III 1.4-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 14 is only for reference to help you identify which Table 14. Components of HP DL380-G2 Quantity Compaq Part Number Description ProLiant DL380R02 P US B GB Pluggable Ultra3 SCSI 10K rpm HDD B MB PC133-MHz ECC SDRAM Memory (2 x 512 MB) DL380 G2 Hot Plug Redundant Power Supply US B21 3rd Party Rack MTG Kit-DL380 (Optional) B21 20/40-GB DAT, HOT PLUG (Optional) HP DL380-G3 Server with Xeon 2400 Processor The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon 2.4-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 15 is only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 10 of 21

11 Table 15. Components of HP DL380-G3 Quantity Compaq Part Number Description DL380 R03 P2400 US B22 or B22 36GB 10K U320 UNI HDD ALL 36GB 15K U320 UNI HDD ALL B21 DVDROM DRV SLIM 8/24X ALL B MB REG PC2100 2X256 ALL B21 3rd Party Rack DL380G3 ALL HP RPS DL380 G3 US (US Power Supply) B21 HP RPS DL380 G3 WW (Non-US Power Supply) B21 20/40-GB HP DAT Drive (optional) HP DL380-G3 Server with Xeon 3060 Processor The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon 3.06-GHz processor. No specific memory configuration is required as long as 1 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 16 is only for reference to help you identify which Table 16. Components of HP DL380-G DL380R03 X KB/533-1GB B22 or B22 36-GB 10K U320 UNI HDD ALL 36-GB 15K U320 UNI HDD ALL B21 COMBO DRV 24X SLIM CARBON ALL B21 3rd Party Rack DL380G3 ALL HP RPS DL380 G3 US (US Power Supply) B21 HP RPS DL380 G3 WW (Non-US Power Supply) B21 20/40-GB HP DAT Drive (optional) HP DL380-G4 Server with Xeon 3.4-GHz Processor The DL380-G4, which requires Cisco OS , is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon 3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 17 is only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 11 of 21

12 Table 17. Components of HP DL380-G * DL380R04 X3.4/800-1M US B21 2-GB (2x1GB) PC3200 DDR B22 72-GB U320 15KRPM HDDs B21 Slimline DVD-ROM Option Kit B21 DL380G4 FLPY DRV w/brkts ALL B21 HP RPS DL380 G4 ALL B21 BBWC Enabler for SA6i B21 DL 380 G3 Redundant Fan Option Kit B21 20/40-GB HP DAT Drive (optional) HP DL380-G4 Server with Xeon 3.4-GHz Processor The DL380-G4, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.0.3, is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon 3.4-GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7835-H1. Note that HP has discontinued sale of this configuration. Table 18 is only for reference to help you identify which Table 18. Components of HP DL380-G DL380R04 X3.4/800 2M US B21 2-GB (2 x 1-GB) PC3200 DDR B22 72-GB U320 15K RPM HDDs B21 Slimline DVD-ROM Option Kit B21 DL380G4 FLPY DRV w/brkts ALL B21 or (Japan only) HP RPS DL380 G4 ALL B21 BBWC Enabler for SA6i B21 DL 380 G3 Redundant Fan Option Kit * DL380R04 X3.4/800 2M US HP DL380-G5 Server with Xeon GHz Processor The DL380-G5, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7835-H2. Note that HP has discontinued sale of this configuration. Table 19 is only for reference to help you identify which This configuration used to be sold as HP PN Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 12 of 21

13 Table 19. Components of Part Number Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB) 1 2GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 2 HP 72 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G2 Server with Dual Pentium III 1400-MHz Processor The DL380-G2 is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 IP phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Pentium III 1.4-GHz processors. No specific memory configuration is required as long as 2 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 20 is only for reference to help you identify which Table 20. Components of HP DL380-G2 Quantity Compaq Part Number Description ProLiant DL380R02 P1.40GHz-512KB B GHz PIII Processor Option Kit (DL380 G2) B22 72-GB 1-in. U3 Hot Plug 10K RPM Universal SCSI Hard Drive B21 2-GB 133-MHz SDRAM DIMM Memory (2x1GB) ** DL380 G2 Hot Plug Redundant Power Supply US B21 3rd Party Rack MTG Kit-DL380 (Optional) B21 20/40-GB DAT, HOT PLUG (Optional) HP DL380-G3 Server with Dual Xeon 2.4-GHz Processors The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 IP phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Xeon 2.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 21 is only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 13 of 21

14 Table 21. Components of HP DL380-G DL380 R03 P2400 US B21 X2.4/ /380 G3 ALL B22 72GB 10K U320 UNI HDD ALL B21 DVDROM DRV SLIM 8/24X ALL B21 1-GB REG PC2100 2X512 ALL B21 2-GB REG PC2100 2x1024 ALL B21 3rd Party Rack DL380G3 ALL B21 FAN HP RED DL380G3 ALL HP RPS DL380 G3 US (US Only) B21 HP RPS DL380 G3 WW (Non-US Power Supply) B21 20/40-GB HP DAT Drive (optional) HP DL380-G3 Server with Dual Xeon 3.06-MHz Processors The DL380-G3 is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 IP phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Xeon 2.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 22 is only for reference to help you identify which Table 22. Components of HP DL380-G DL380R03 X KB/533-1GB B21 X3.06/ /380G3 ALL B22 72-GB 10K U320 UNI HDD ALL B21 COMBO DRV 24X SLIM CARBON ALL B21 1-GB REG PC2100 2X512 ALL B21 2-GB REG PC2100 2x1024 ALL B21 3rd Party Rack DL380G3 ALL B21 FAN HP RED DL380G3 ALL HP RPS DL380 G3 US (US Only) B21 HP RPS DL380 G3 WW (Non-US Power Supply) B21 20/40-GB HP DAT Drive (optional) B21 Battery Backed Write Cache Enabler Kit HP DL380-G4 Server with Dual Xeon 3.4-GHz Processors The DL380-G4, which requires Cisco OS , is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 23 is only for reference to help you identify which 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 14 of 21

15 Table 23. Components of HP DL380-G DL380R04 X3.4/800-1M US B21 X3.4/800-1M 370/380 G4 ALL B21 2-GB (2x1GB) PC3200 DDR B21 Slimline DVD-ROM Option Kit B21 DL380G4 FLPY DRV w/brkts ALL B22 72-GB U320 15KRPM HDDs B21 HP RPS DL380G4 ALL B21 BBWC Enabler for SA6i B21 DL380 G3 Redundant Fan Option Kit B21 20/40-GB HP DAT Drive (optional) HP DL380-G4 Server with Dual Xeon 3.4-GHz Processors The DL380-G4, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.0.3, is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Xeon 3.4-GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server is the configuration equivalent of the Cisco MCS 7845-H1. Note that HP has discontinued sale of this configuration. Table 24 is only for reference to help you identify which Table 24. Components of HP DL380-G DL380R04 X3.4/800 2M US B21 X3.4/800 2M 370/380 G4 ALL B21 2-GB (2x1GB) PC3200 DDR B21 Slimline DVD-ROM Option Kit B21 DL380G4 FLPY DRV w/brkts ALL B22 72-GB U320 15KRPM HDDs B21 or (Japan only) HP RPS DL380G4 ALL B21 BBWC Enabler for SA6i B21 DL380 G3 Redundant Fan Option Kit HP DL380-G5 Server with Xeon GHz Processor The DL380-G5, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software applications. When clustered properly, 10,000 Cisco Unified Communications Manager users can be supported. The required processor is an Intel Xeon GHz processor. No specific memory configuration is required as long as 2 GB of memory is provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7835-H Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 15 of 21

16 Note that HP has discontinued sale of this configuration. Table 25 is only for reference to help you identify which Table 25. Components of HP DL380-G HP DL380G G (includes server, proc, 2 x 1-GB RAM, P400/256, 1 RPS B21 Battery-backed write cache upgrade B21 HP 72 GB SAS 10,000-rpm Hard Drive (2.5") B21 Slimline DVD-ROM Option Kit Redundant Power Supply 350/370/380 G5 US Kit (IEC cord only) B21 PCI-X/E Mixed Riser Option (DL380G5) HP DL380-G5 Server with Dual Xeon GHz Processors The DL380-G5, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Xeon GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7845-H2. Note that HP has discontinued sale of this configuration. Table 26 is only for reference to help you identify which Table 26. Components of HP DL380-G HP DL380G G (includes server, proc, 2 x 1-GB RAM, P400/256, 1RPS B21 Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB) B21 2 GB FBD PC x 1-GB Kit (2-GB RAM additional for 4 GB total for config) B21 Battery-backed write cache upgrade B21 HP 72 GB SAS 10,000 rpm Hard Drive (2.5 in.) B21 Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) B21 Redundant Power Supply 350/370/380 G5 US Kit (IEC cord only) B21 PCI-X/E Mixed Riser Option (DL380G5) HP DL380-G5 Server with Dual Xeon GHz Processors The DL380-G5, which requires Cisco Windows OS or Cisco Unified Communications Manager 5.1.1(b), is a robust server solution designed for Cisco Unified Communications software applications. Up to 7,500 Cisco Unified IP Phones can be supported on a single server running Cisco CallManager or Cisco Unified Communications Manager. The required processors are dual Intel Xeon GHz processors. No specific memory configuration is required as long as 4 GB of memory is achieved. This server does not support Cisco Unified Communications Manager 5.0. It is the configuration equivalent of the Cisco MCS 7845-H2. Note that HP has discontinued sale of this configuration. Table 27 is only for reference to help you identify which This configuration used to be sold as HP PN Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 16 of 21

17 Table 27. Components of Part Number Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB) 1 Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB) 2 2 GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 4 HP 72 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G5 Server with Dual Xeon GHz Processors and 146-GB Hard Drives The DL380-G5 is a robust server solution designed for Cisco Unified Communications software applications. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided (note that some product versions may require more memory). Note that HP has discontinued sale of this configuration. Table 28 is only for reference to help you identify which This configuration was originally sold as HP PN Table 28. Components of Part Number Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB) 1 Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB) 2 2 GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 4 HP 146 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G5 Server with Dual Xeon Quad-Core E GHz Processors and 146-GB Hard Drives The DL380-G5 is a robust server solution designed only for Cisco Unified Contact Center and messaging products. The required processors are dual Intel Xeon quad-core E GHz processors. No specific memory configuration is required as long as 4 GB of memory is provided (note that some product versions may require more memory). Note that HP has discontinued sale of this configuration. Tables 29 and 30 are only for reference to help you identify which These configurations were originally sold as HP PN AR111A and AR109A. Table 29. Components of Part Number AR111A (equivalent of Cisco MCS 7845-H2-ECS3/CCE3) Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 17 of 21

18 1 Quad-Core Intel Xeon Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 FIO Kit 1 1 Quad-Core Intel Xeon Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 Opt Kit GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 4 HP 146 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) 1 Redundant Power Supply 350/370/380 G5 US Kit Table 30. Components of Part Number AR109A (equivalent of Cisco MCS 7845-H2-ECS4/CCE4) Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 FIO Kit 1 1 Quad-Core Intel(r) Xeon(r) Processor E5345 (2.33 GHz, 80 Watts, 1333 FSB) DL380 G5 Opt Kit GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 8 HP 146 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G5 Server with Single Xeon GHz Processor and 146-GB Hard Drives The DL380-G5 is a robust server solution designed for Cisco Unified Communications software applications. When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 2 GB of memory is provided (note that some product versions may require more memory). Note that HP has discontinued sale of this configuration. Table 31 is only for reference to help you identify which This configuration was originally sold as HP PN Table 31. Components of Part Number Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB) 1 2GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 2 HP 146 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G5 Server with Single Xeon GHz Processor This server configuration is identical to the HP DL380-G5 server with a single Xeon GHz processor and 146-GB hard drives, except that this configuration uses 72-GB hard drives and supports different versions of the IP telephony OS and Cisco Unified Communications Manager. Note that Cisco Unified Communications Manager 5.0 is not supported on this model. It is the configuration equivalent of the Cisco MCS 7835-H Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 18 of 21

19 Note that HP has discontinued sale of this configuration. Table 32 is only for reference to help you identify which This configuration used to be sold as HP PN Table 32. Components of Part Number Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB) 1 2GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 2 HP 72 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G5 Server with Dual Xeon GHz Processors This server configuration is identical to the HP DL380-G5 server with dual Xeon GHz processors and 146-GB hard drives, except that this configuration uses 72-GB hard drives and supports different versions of the IP telephony OS and Cisco Unified Communications Manager. Note that Cisco Unified Communications Manager 5.0 is not supported on this model. It is the configuration equivalent of the Cisco MCS 7845-H2. Note that HP has discontinued sale of this configuration. Table 33 is only for reference to help you identify which This configuration used to be sold as HP PN Table 33. Components of Part Number Quantity Description 1 HP ProLiant DL380G5 Rack Chassis 1 Dual-core Intel Xeon Processor 5140 (2.33 GHz, 1333 FSB) 1 Dual-core Intel Xeon 5140 Processor (2.33 GHz, 1333 FSB) 2 2 GB FBD PC x 1 GB Kit 1 P400/256 for DL380 G5/DL385 G2 FIO 1 Battery-backed write cache upgrade 4 HP 72 GB SAS 10,000 rpm Hard Drive (2.5") 1 Slimline DVD-ROM Drive (8X/24X) Option Kit (Servers) 1 Redundant Power Supply 350/370/380 G5 US Kit HP DL380-G6 Server with Single Quad-Core E GHz Processor and 146-GB Hard Drives The DL380-G6 is a robust server solution designed for Cisco Unified Communications software applications. When configured properly for Cisco Unified Communications Manager, up to 2,500 devices on a single server and up to 10,000 devices per cluster can be supported. No specific memory configuration is required as long as 4 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 34 is only for reference to help you identify which This configuration used to be sold as HP PN AX690A Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 19 of 21

20 Table 34. Components of Part Number AX690A Quantity Description 1 HP DL380G6 CTO Chassis Ghz Nehalem E5504 Processor FIO 2 HP 2GB 2Rx8 PC R-9 Kit 2 HP 146GB 10K 6G 2.5 SAS DP HDD 2 HP 1200W CS HE Power Supply Kit 1 HP Slim SATA DVD-ROM Optical Drive 1 HP 256 MB P-series cache module FIO 1 HP 650 mah P-Series Battery 1 HP ilo Adv 1-Svr incl 1yr TS&U SW 1 HP Trusted Platform Module Option Kit 1 HP V100W 8GB USB flash drive 2.0 HP DL380-G6 Server with Single Quad-Core E GHz Processor and 146-GB Hard Drives The DL380-G6 is a robust server solution designed for Cisco Unified Communications software applications. When configured properly for Cisco Unified Communications Manager, up to 7,500 devices on a single server and up to 30,000 devices per cluster can be supported. No specific memory configuration is required as long as 6 GB of memory is provided. Note that HP has discontinued sale of this configuration. Table 35 is only for reference to help you identify which This configuration was originally sold as HP PN AX691A. Table 35. Components of Part Number AX691A Quantity Description 1 HP DL380G6 CTO Chassis Ghz Nehalem E5540 Processor FIO 3 HP 2GB 2Rx8 PC R-9 Kit 4 HP 146GB 10K 6G 2.5 SAS DP HDD 2 HP 1200W CS HE Power Supply Kit 1 HP Slim SATA DVD-ROM Optical Drive 1 HP 256 MB P-series cache module FIO 1 HP 650 mah P-Series Battery 1 HP ilo Adv 1-Svr incl 1yr TS&U SW 1 HP Trusted Platform Module Option Kit 1 HP V100W 8GB USB flash drive Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 20 of 21

21 HP Tape Drives Cisco supports certain models of USB-attached DAT tape drives for software backups to a local tape instead of to a network location. These tapes drives are supported with select models of Cisco MCS 7800 Series Media Convergence Servers. These tape drives were formerly sold as Cisco part numbers DAT-USB-RM-72 and DAT- USB-EXT-72. Ordering instructions from HP: Please order from HP the part numbers of one of the supported models in Table 36. These part numbers are orderable through HP or HP authorized resellers in all regions. For media for these DAT drives, please consult: Table 36. Supported HP USB DAT Drives HP Part Number Description Rack-mount tape drive DW026A DAT 72 USB Internal Tape Drive A8007A 1U USB Rack-Mount Kit External tape drive (free-standing) DW027A DAT 72 USB External Tape Drive Printed in USA C / Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 21 of 21