QuickSpecs. HP ProLiant ML110 Generation 4 (G4) Overview

Transcription

1 Overview 1. CD-ROM Drive 2. Power LED 3. Drive Activity LED 4. Well ventilated chassis design 5. Main System Board 6. HDD controller card (Optional) 7. HP LO 100c Management Card (Optional) 8. Rear System Fan W Power Supply What's New Processors: Dual-Core Intel Pentium D Processor 935 (3.2 GHz, 800 MHz FSB) Dual-Core Intel Pentium D Processor 945 (3.4 GHz, 800 MHz FSB) Storage Controller: HP SC44Ge Host Bus Adapter Communications: HP NC110T PCI Express Gigabit Server Adapter Internal Storage: Support up to 1.2TB SAS max storage (4 x 300GB) DA North America Version 7 March 26, 2007 Page 1

2 Overview At A Glance Processor: Dual-Core Intel Xeon processors 3000 sequence Dual-Core Intel Pentium D processors 800 or 900 sequence Single-Core Intel Celeron D processors Memory 512 MB Standard / 8 GB Maximum of PC DDR2 667 MHz ECC unbuffered Memory Storage Controller: 4 Port SATA controller with Embedded RAID on Motherboard HP 8 Internal Port SAS HBA with RAID Internal Drive Support: 4 HDD Support: 2TB SATA max storage (utilizing 500GB CTO HDD) 1.2TB SAS max storage (4 x 300GB) Network Controller: Embedded NC320i PCIe Gigabit Server Adapter Expansion Slots: Two 32-bit/33MHz PCI at 3.3V slot Two PCI-Express slots (x4 and x8, both in an x8 connector). USB Ports: Six total USB ports (2 internal, 2 front, 2 rear) Form Factor: Micro ATX tower Management: Standard IPMI reporting Lights Out 100c Remote Management Card (Optional) Warranty: Protected by HP Services, including a one-year, limited warranty, Next Business Day 1 year on-site limited Global warranty - Certain restrictions and exclusions apply. DA North America Version 7 March 26, 2007 Page 2

3 Standard Features Processor One of the following depending on Model Dual-Core Intel Pentium D Processor 945 (3.4 GHz, 800 MHz FSB)* Dual-Core Intel Pentium D Processor 935 (3.2 GHz, 800 MHz FSB)* Dual-Core Intel Pentium D processor 925 (3.0 GHz, 800MHz, FSB) Dual-Core Intel Pentium D processor 915 (2.8 GHz, 800MHz FSB) Dual-Core Intel Pentium D processor 820 (2.8 GHz, 800MHz FSB)* Dual-Core Intel Xeon processor 3050 (2.13 GHz, 1066MHz FSB)* Dual-Core Intel Xeon processor 3040 (1.86 GHz, 1066MHz FSB) Single-Core Intel Celeron D processor 352 (3.20 GHz, 533MHz FSB)* *NOTE: Processors available via CTO only. Cache Memory One of the following depending on Model 1x2 MB shared Level 2 cache (Xeon sequence) 2x2 MB Level 2 cache (Pentium D 900 sequence) 2x1 MB Level 2 cache (Pentium D 800 sequence) 512KB Level 2 cache (Celeron D) Chipset Intel 3000 Memory Protection Advanced ECC Memory Type PC unbuffered DDR2 SDRAM (667MHz) Standard 512 MB Maximum 8 GB Network Controller Embedded NC320i PCIe Gigabit Server Adapter Expansion Slots Slot Number Bus Speed Hot Plug Y/N PCI Voltage Notes 4 x8 PCI Express No n/a Full Height 3 x4 PCI Express No n/a In a x8 slot Full Height 1/2 32bit/33MHz PCI No 3.3V Full Height NOTE: Only one brace for full length cards provided. Storage Controller One of the following depending on Model Integrated 4 port SATA controller with embedded RAID DA North America Version 7 March 26, 2007 Page 3

4 Standard Features Storage CD-ROM 48x IDE (ATAPI) CD-ROM Drive Hard Drives SATA 160GB SATA 7200 rpm Drive SAS 72GB SAS 1500 rpm Drive Maximum Internal Storage Type SAS (Not-hot plug) SATA (Non-hot plug) 1.2TB 2TB *NOTE: Available CTO only. (4x300GB) (4 x 500GB*) Interfaces Parallel 0 Serial 2 Pointing Device (Mouse, PS2) Graphics 1 Keyboard (PS2) 1 USB 1 6 total (2 rear, 2 front panel, 2 internal (one for USB Tape connectivity)) Network RJ-45 (Ethernet) Management NOTE: Internal USB ports are optimal for the attachment of HP USB DAT Tape Drives NOTE: Please see the following URL for additional information regarding USB support: 1 Optional Lights-Out 100c Remote Management port Graphics Integrated 2MB video controller Form Factor Micro ATX Tower (4U) Industry Standard Compliance ACPI V2.0 Compliant PCI 2.3 Compliant PXE Support WOL Support IPMI 2.0 compliance Manageability Embedded IPMI standard reporting Optional HP ProLiant Lights-Out 100c Remote Management Card DA North America Version 7 March 26, 2007 Page 4

5 Standard Features Security Power-on password Setup password Server Power Cords 12' lowline NEMA power cord. NOTE: Rack models ship standard with a 12' IEC cable. Most redundant power supply options ship with a 6' power cord. Power Supply 370 Watts System Fans 1 non-redundant system fan shipped standard 1 non-redundant CPU heatsink fan shipped standard OS Support Microsoft Windows Server 2003: Standard & Enterprise Edition (32 and 64 bit) Microsoft Windows Small Business Server 2003 Microsoft Windows 2003 Server, Web Edition Novell NetWare 6.5 SBS (only after SP6 release) RedHat Enterprise Linux SUSE Linux Enterprise Server NOTE: For an up-to-date listing of the latest ML110 G4 OS support matrix, please see: NOTE: For an up-to-date listing of the latest drivers available for the HP server ML110 G4, please see: NOTE: Drivers may also found on the base media for some Linux OS's. When configuring your server, please consult your base media driver base, or visit HP.com at: NOTE: For more Linux OS support & certification information, please visit our the ProLiant & Bladesystem Server Linux matrix Factory Express Portfolio for Servers and Storage HP Factory Express offers configuration, customization, integration and deployment services for HP servers and/or storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed. Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging HP products supported through Factory Express include a wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers, as well as, the MSA1000, VA7xxx, EVA, XP, rackable tape libraries and configurable network switches. For more information on Factory Express services for your specific server model please contact your sales representative or go to DA North America Version 7 March 26, 2007 Page 5

6 Standard Features HP ProLiant Smart Buys The HP Smart Buy program offers mainstream business solutions at competitive prices with excellent availability and superior HP quality. It offers a wide range of industry-leading HP products at compelling prices, allowing you to receive richer configurations with additional options. NOTE: For detailed specification information on ProLiant Smart Buys please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf HP Enterprise Configurator The HP eco-enterprise Configurator now provides factory default racking for our HP hardware portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our valued customers. If you require "custom" rack configuration, please contact HP's Customer Business Center or an Authorized Partner for assistance. Service and Support This product is covered by a global limited warranty and supported by HP Services and a worldwide network of resellers and service providers. Hardware diagnostic support and repair is available for one year from date of purchase. Support for software and initial setup is available for 90 days from date of purchase. Additional support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services or customized service agreements. NOTE: Limited warranty includes 1 year parts, 1 year labor, 1-year on-site support (3-1-1 warranty offered in AP only) HP Care Pack services include coverage for the HP branded hardware options qualified for the server, purchased at the same time or afterward, internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3kVA; these items will be covered at the same service level and for the same coverage period as the server. Coverage of UPS Battery is not included, standard warranty terms & conditions apply. For servers or storage systems installed within a rack, service also covers all HP qualified rack options installed within the same rack. HP services provide continuous care and support expertise with committed response designed to meet your IT and business needs. To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who thoroughly understands your server technology and systems environment. HP Services, an industry leader in provision of multi vender support solutions provides a range of support services designed to meet the varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support offer to help you speedily deploy and maximize system uptime. Extended Care Minimum recommended service support offer designed to ensure customers have access to expert assistance, whenever they need it. 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years Committed Care Cost-effective service options designed to extend HP Services committed response and guaranteed fix times, designed to speed problem resolution. 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years Committed Response Highest HP Support service level recommend to help increase IT performance and availability with comprehensive, consistent hardware and software services Support Plus 24 - Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays DA North America Version 7 March 26, 2007 Page 6

7 Standard Features Deployment Services HP Installation and Start Up services designed to take time, risk, and worry out of the deployment of ProLiant servers and free customers people to focus on what they do best, their business. Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays. NOTE: For a complete listing of service offerings and information visit: DA North America Version 7 March 26, 2007 Page 7

8 Models NOTE: For detailed specification information on ProLiant Smart Buys please click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf. SATA Models HP ML110G4 P MB, NHP 160GB SATA (1P) HP ML110G4 P MB, NHP 160GB SATA (1P) HP ML110G MB, NHP 160GB SATA (1P) Processor(s) One of the following depending on Model Cache Memory One of the following depending on Model Memory Storage Controller Hard Drive Internal Storage Optical Drive Form Factor One (1) Dual-Core Intel Pentium D Processor 925 (3.0 GHz, 800 MHz FSB) One (1) Dual-Core Intel Pentium D Processor 915 (2.8 GHz, 800MHz FSB) One (1) Dual-Core Intel Xeon 3040 Processor (1.86 GHz, 1066 MHz FSB) 2 x 2MB Level 2 cache (Pentium 915 & Pentium 925) 1 x 2MB shared Level 2 cache (Xeon 3040) 512 MB PC ECC (DDR2-667Mhz) (1 x 512 MB) HP Embedded 4 Port SATA Controller with embedded RAID 160GB SATA HDD Maximum 1TB (4 x 250GB) SATA 48x CD-ROM Micro ATX Tower SAS Models HP ML110G4 3040, 512MB, NHP-SAS (1P) Processor(s) One of the following depending on Model One (1) Dual-Core Intel Xeon 3040 Processor (1.86 GHz, 1066 MHz FSB) Cache Memory 1 x 2MB shared Level 2 cache (Xeon 3040) Memory 512 MB PC ECC (DDR2-667Mhz) (1 x 512 MB) Storage Controller HP 8 Internal Port SAS HBA with RAID (0,1) Hard Drive Internal Storage Optical Drive Form Factor 72GB SAS HDD Maximum 1.2TB (4 x 300GB) SAS 48x CD-ROM Micro ATX Tower DA North America Version 7 March 26, 2007 Page 8

9 Configuration Information-Factory Integrated Models NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with a CTO Chassis. NOTE: This product offering does not support HP Factory Express Server Configuration Level 1. NOTE: FIO indicates that this option is a Factory Installable Option. NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional information. Step 1: Base Configuration Models HP ProLiant ML110 G4 Tower Chassis B21 Factory Integrated Models ship with: Embedded NC320i PCIe Gigabit Server Adapter Keyboard and Mouse 370 Watts, PFC (Power Factor Correcting) Tower Form Factor (4U) Step 2: Choose Required Options (only one of the following from each list unless otherwise noted) Processors Single-Core Intel Celeron D processor GHz/533MHz/512 MB L2 Cache, Factory Integrated Dual-Core Intel Pentium D processor GHz/800MHz/2x1 MB L2 Cache, Factory Integrated Dual-Core Intel Pentium D processor GHz/800MHz/2x2 MB L2 Cache, Factory Integrated Dual-Core Intel Pentium D processor GHz/800MHz/2x2 MB L2 Cache, Factory Integrated Dual-Core Intel Pentium D Processor GHz/800 MHz, 2x2 MB L2 Cache, Factory Integrated Dual-Core Intel Pentium D Processor GHz/800 MHz/2x2 MB L2 Cache, Factory Integrated Dual-Core Intel Xeon processor GHz/1066MHz/1x2M L2 Cache, Factory Integrated Dual-Core Intel Xeon processor GHz/1066MHz/1x2M L2 Cache, Factory Integrated L L L L L L L L21 Memory 2048 MB Unbuffered Advanced ECC PC DDR2 (1 x 2048 MB), Dual Rank 1024 MB Unbuffered Advanced ECC PC DDR2 (1 x 1024 MB), Dual Rank 512 MB Unbuffered Advanced ECC PC DDR2 DIMM (1 x 512 MB), Single Rank B B B21 DA North America Version 7 March 26, 2007 Page 9

10 Configuration Information-Factory Integrated Models Hard Drives Serial ATA (SATA) Non-hot Plug HDD (SATA or SAS Models) HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD B21 HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD B21 HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD B21 HP 500GB 1.5G SATA 7.2K NHP 3.5" HDD, FIO* B21 *NOTE: Factory Integrated Only Serial Attached SCSI (SAS) Non-Hot Plug (SAS Models Only) HP 300GB SAS 3.5" 15K NHP B21 HP 146GB SAS 3.5" 15K NHP B21 HP 72GB SAS 3.5" 15K NHP B21 Optical Drives CD-RW/DVD-ROM Combo Drive Option Kit B21 HP DVD+R/RW 8X HH B21 HP ProLiant 48X CD B21 DVD ROM Drive 16x B21 NOTE: For the installation of Windows and other OS's, a floppy drive (DC361B) may be required to complete driver installation. A USB drive key may not work to complete driver installation. Step 3: Choose Additional Factory Integratable Options Storage Controllers HP SC44Ge Host Bus Adapter B21 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2 NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) B21 HP Smart Array E200/128 BBWC Controller B21 NOTE: SAS Storage Controllers will run both SATA and SAS drives. NOTE: The purchase of a SAS Storage Controller requires the purchase of HP SAS/SATA 4-Port Cable (P/N B21) Step 4: Choose Additional Options for Factory Integration NOTE: For additional options, please refer to the "Options" section below. NOTE: Some options may not be factory integratable. Please contact your local sales representative for additional information. DA North America Version 7 March 26, 2007 Page 10

11 Options Memory 2048 MB Unbuffered Advanced ECC PC DDR2 (1x2048 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 (1x1024 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 (1x512 MB), Single Rank B21 Optical Drives CD-RW/DVD-ROM Combo Drive Option Kit B21 48X CD-ROM Option, Carbon B21 DVD-RW Drive Option Kit B MB USB Diskette Drive DC361B NOTE: For the installation of Windows and other OS's, a floppy drive may be required to complete driver installation. A USB drive key may not work to complete driver installation. Hard Drives Serial ATA (SATA) Non-Hot Plug (SATA Models Only) HP 80GB 1.5G SATA 7.2K NHP 3.5" HDD B21 HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD B21 HP 250GB 1.5G SATA 7.2K NHP 3.5" HDD B21 NOTE: When purchasing systems with the 500GB Non-Hot Plug SATA drives, please reference the Configuration Information Section of this QuickSpecs to order via Configuration to Order. NOTE: The purchase of additional SATA hard drives requires the purchase of additional HP 1-Port SATA RAID Cables, (P/N ) Serial Attached SCSI (SAS) Non-Hot Plug (SAS Models Only) HP 300GB SAS 3.5" 15K NHP B21 HP 146GB SAS 3.5" 15K NHP B21 HP 72GB SAS 3.5" 15K NHP B21 NOTE: The purchase of SAS hard drives requires the purchase of HP Internal SAS/SATA 4-Port Cable (P/N B21). This cable is standard in the SAS BTO model. Storage Controllers HP SC44Ge Host Bus Adapter B21 HP SC11Xe Host Bus Adapter B21 HP 8 Internal Port SAS HBA with RAID NOTE: PCI-X Interface (PCI 32bit/33MHz compatible) B21 HP Smart Array E200/128 BBWC Controller B21 128MB Battery-Backed Write Cache Enabler B21 NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller and Smart Array 642 Controller. HP 1-Port SATA RAID Cable NOTE: The purchase of SATA hard drives requires the purchase of the HP 1- Port SATA RAID Cable (P/N B21) for each additional hard drive. HP Internal SAS/SATA 4-Port Cable NOTE: The purchase of a SAS Storage Controller requires the purchase of HP SAS/SATA 4-Port Cable (P/N B21) B B21 DA North America Version 7 March 26, 2007 Page 11

12 Options Communications HP NC110T PCI Express Gigabit Server Adapter B21 HP NC150T PCI 4-port Gigabit Combo Switch Adapter B21 HP NC360T PCI Express Dual Port Gigabit Server Adapter B21 Agere 2006 PCI Hi-Speed 56K Modem B21 Tape Drives NOTE: Installation of SCSI internal tape drives in a ML110 G4 model requires SCSI controller kit (PN: B21). NOTE: For complete listing of tape drive offerings see: USB Tape Drives HP StorageWorks DAT 24 USB Internal Tape Drive (Carbonite) HP StorageWorks DAT 40 USB Internal Tape Drive (Carbonite) HP StorageWorks DAT 72 USB Internal Tape Drive (Carbonite) DAT Tape Drives HP StorageWorks DAT 40 SCSI Internal Tape Drive (Carbon) HP StorageWorks DAT 72 SCSI Internal Tape Drive (Carbon) DW069A DW022A DW026A C5686C Q1522B HP Data Protector Express Software HP DP Express Backup Server Upgrade for ProLiant Software HP DP Express Package for Microsoft Small Business Server NOTE: Please see the HP Data Protector Express QuickSpecs for additional information regarding the purchase of HP Data Protector Express software: NOTE: To obtain a free licensed copy of HP Data Protector Express for ProLiant edition software, please visit the "Protect Your Data" link accessible from your ProLiant server's System Management Homepage (SMH) software (SmartStart 7.5 or later). BB117AP BB118AA Installation of Server into Racks ProLiant Rack Enabling Kit B21 Lights Out Management Card Lights-Out Management Card Kit for ML110 G B21 UPS HP T1000 UPS AF404A HP T1000 UPS AF403A HP T750 UPS, Low Voltage D71 DA North America Version 7 March 26, 2007 Page 12

13 Options USB Options HP 1GB Drive Key II- USB 2.0 Flash Drive AG382AA HP 512MB DriveKey II- USB Flash Drive ED516AA HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver) DC172B HP USB 04 Standard Keyboard DT528A#ABA USB port HUB DG954A HP KVM Switch Options HP 1x4 Console Switch HP PS2 Server Console Cable, 6 foot, 2-Pack HP USB Server Console Cable, 6 foot, 2-Pack NOTE: required for supporting USB peripherals. NOTE:For additional information regarding KVM Switches, Serial Console servers, rack mount monitors, keyboards and all related options please see the following URL: AF611A AF612A AF613A DA North America Version 7 March 26, 2007 Page 13

14 Service and Support, HP Care Pack, and Warranty Information Service and Support Offerings (HP Care Pack Services) Hardware Services 4-Hour On-site Service 13-Hour x 5-Day Coverage, 3 Years 24-Hour x 7-Day Coverage, 3 Years Hardware Services Next Business Day On-Site Service 9-Hour x 5-Day Coverage, 3 Years Hardware Services 6 Hour Call-to-Repair 24-Hour x 7-Day Coverage, 3 Years, 6 Hour Call-to-Repair Hardware Installation Service HP Install ProLiant ML110 Service NOTE: For more information, customer/resellers can contact U4434E U4435E U4433E U4436E U4444E DA North America Version 7 March 26, 2007 Page 14

15 Memory HP ProLiant ML110 G4 Models Standard Memory 512 MB of PC DDR2 SDRAM running at 512 MB with Advanced ECC capabilities Memory installed (1 x 512 MB SDRAM DIMM). Standard Memory Plus Optional Memory Up to 5120 MB memory is available with the optional installation of PC un-buffered ECC DDR2 SDRAM DIMM Memory kits. Standard Memory Replaced with Optional Memory Up to 8192 MB of memory is available with the removal of the standard 512 MB of memory and the optional installation of PC un-buffered ECC DDR2 SDRAM DIMM Memory kits. NOTE: The below chart does not represent all possible memory configurations. NOTE: In memory configurations requiring 2 DIMM and 4 DIMM configurations, the memory must be paired for optimal performance. This means that DIMMs in slot 1 and 3 have to be identical, in slot 2 and 4 have to be identical. (For example, the Optional memory configuration shown below) Memory Slot Standard 512 MB Empty Empty Empty 512 MB Optional 5120 MB 2048 MB 512 MB 2048 MB 512 MB Maximum 8192 MB 2048 MB 2048 MB 2048 MB 2048 MB Following are memory options available from HP: 2048 MB Unbuffered Advanced ECC PC DDR2 (1 x 2048 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 (1 x 1024 MB), Dual Rank B MB Unbuffered Advanced ECC PC DDR2 DIMM (1 x 512 MB), Single Rank B21 DA North America Version 7 March 26, 2007 Page 15

16 Storage 1 48x IDE (ATAPI) CD-ROM 2 Removable Media Bays (1.6" each) 3, 4, 5, 6 Four (4) Non-Hot Plug Drive Bays Drive Support Removable Media Quantity Supported Position Supported Controller DVD + CDRW Drive 2 1 or 2 Integrated IDE (ATAPI) DVD-RW Drive 2 1 or 2 Integrated IDE (ATAPI) Hard Drives (SATA Models only) SATA 1.5Gb Non-Hot Plug 3.5-inch 80GB 7.2K, SATA 160GB 7.2K, SATA 250GB 7.2K SATA 500GB 7,2K SATA Quantity Supported Position Supported Controller Up to 4 3,4,5,6 4 Port SATA controller with Embedded RAID on Motherboard DA North America Version 7 March 26, 2007 Page 16

17 Storage Hard Drives (SAS Models only) SAS Non-Hot Plug 3.5-inch 72GB 15K, SAS 145GB 15K SAS 300GB 15K SAS Quantity Supported Position Supported Controller Up to 4 3,4,5,6 HP 8 Internal Port SAS HBA with RAID (0,1) Maximum Storage Capacity SATA/SAS Models Internal SATA 1TB (4x250GB (BTO) 2TB (4 x 500GB (CTO) SAS 1.2TB (4x300GB) Total SATA 1TB (4x250GB (BTO) 2TB (4 x 500GB (CTO) SAS 1.2TB (4x300GB) Tape Drives NOTE: A SCSI controller needs to be purchased to operate internal SCSI devices in the SATA Models. NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the following: Internal USB Tape Drives DAT 24 USB DAT 40 USB DAT 72 USB External USB Tape Drives DAT 24 USB DAT 40 USB DAT 72 USB Internal SCSI Tape Drives DAT 40 DAT 72 External SCSI Tape Drives DAT 40 DAT 72 Position Supported Controller Controller/HBA Option Kit Part Number 2 USB 2.0 port N/A External USB 2.0 port N/A 2 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G B21 External 64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G B21 DA North America Version 7 March 26, 2007 Page 17

18 Power Specifications Part Number Spare Kit Operational Input Voltage Range (Vrms) Frequency Range (Nominal) (Hz) 100 to 127 and 200 to 240 V auto ranging 50 to 60 Hz Nominal Input Voltage (Vrms) Max Rated Output Wattage Rating N/A 370 N/A N/A 370 N/A Nominal Input Current (A rms) N/A 8 N/A N/A 4 N/A Max Rated Input Wattage Rating (Watts) N/A N/A N/A N/A N/A N/A Max. Rated VA (Volt-Amp) N/A N/A N/A N/A N/A N/A Efficiency (%) N/A >65% N/A N/A >65% N/A Power Factor N/A N/A N/A N/A N/A N/A Leakage Current (ma) 0.25mA (at 60HZ) Maximum Inrush Current (A peak) N/A No component was damaged and input fuse shall not blow Maximum Inrush Current duration (ms) N/A N/A N/A N/A N/A N/A N/A No component was damaged and input fuse shall not blow N/A N/A N/A N/A N/A N/A N/A DA North America Version 7 March 26, 2007 Page 18

19 System Specifications HP ProLiant ML110 G4 Fully Configured Fully Loaded System output Wattage (W) Fully Loaded System Input Current (A rms) Fully Loaded System Thermal (BTU- Hr) Power ** (see **) 370W Fully Loaded System VA (Volt-Amp) 920 System Leakage with all power supplies loaded (ma) System Inrush Current with all power supplies loaded (A) Power cord requirements Power Cords (13 Cord Sets) 115V, 230V 1907BTU 0.75mA@240V 0.45mA@120V 80A Nema 5-15P to IEC320-C13 IEC320-C13 to IEC320-C14 **Power shown is for a fully configured system consisting of (1) CPU, (4) double-sided DIMMs, (4) HDDs, (1) CD-ROM, (1) DVD-ROM, (4) PCI cards, and (1) power supply. Power Cord Part Number DA North America Version 7 March 26, 2007 Page 19

20 Technical Specifications System Unit Dimensions (HxWxD) (with feet) Weight (approximate) Input Requirements (per power supply) x 6.88 x in (36.7 x 17.5 x 42.6 cm) lb (10.5 kg) Range Input Voltage Normal Line Voltage Line Frequency 50 to 60 Hz Rated Input Current BTU Rating SCSI Connectors (SCSI Models only) Power Supply Output Power (per power supply) 100 to 127 VAC/200 to 240 VAC 115 or 230 VAC load 8A at 115VAC, 4A at 230VAC 1907 BTU One internal LVD/SE connector for U160 devices, plus two internal SE connectors for legacy devices. Rated Steady-State Power Maximum Peak Power 370W 370W Temperature Range Operating 50 to 95 F (10 to 35 C) Relative Humidity (non-condensing) Acoustic Noise Shipping -40 to 140 F (-40 to 60 C) Operating 10% to 90% Non-operating 10% to 90% Idle (Fixed Disk Drives Spinning) L WAd (BELS) 5.5 Operating (Random Seeks to Fixed Disks) L WAd (BELS) 6.0 HP 160GB 1.5G SATA 7.2K NHP 3.5" HDD B21 160GB 7,200 rpm Capacity 160,041 MB Height Width Interface Transfer rate synchronous (maximum) Seek time (typical reads, including settling) 1.0 in. (26.1 mm) 4.0 in. (101.6 mm) Serial ATA 1.5 Gb/s Single track Average Full-stroke Rotational speed 0.9 ms 9.0 ms Physical Configuration Bytes/Sector ms 7,200 rpm Logical Blocks 312,581,808 Operating Temperature 41 to 131 F (5 to 55 C) DA North America Version 7 March 26, 2007 Page 20

21 Technical Specifications NHP 72GB 3G SAS 15K 3.5" HDD B21 72GB 15K Capacity 73,407,856,856 Height Width Interface Transfer rate synchronous (maximum) Seek time (typical reads, including settling) 1.0 in (25.4mm) 4.0 in. (101.6 mm) SAS 3 Gb/sec Single track Average Full-stroke Rotational speed 0.27 ms 3.5 ms 3.5 ms Physical Configuration Bytes/Sector ,000 rpm Logical Blocks 143,374,737 Operating Temperature 50 to 95 F (10 to 35 C) 48X Max IDE (ATAPI) CD-ROM Drive B21 Disk Applicable Disk CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2, Form 1 and 2) Capacity Photo CD (Single and Multi-session) Mixed Mode (Audio and Data combined) CD-R 540MB (Mode 1, 12 cm) 650MB (Mode 2, 12 cm) Block Size Mode 1 2,048 bytes, 1024 bytes Mode 2 CD-DA CD-XA Interface IDE (ATAPI) 2,340 bytes, 2,336 bytes, 1024 bytes 2,352 bytes 2,328 bytes Access Times (typical) Random <100 ms Full-Stroke <150 ms Data Transfer Rate Sustained 3000 to 7200 KB/s (20X to 48X) Burst Bus Rate Cache Buffer 128 KB Start-up Time (typical) < 7 seconds Stop Time < 4 seconds 150 KBps to 7,200 KBps 16.7 MBps Laser Parameters Type Semiconductor Laser GaA1As Wave Length 780 ± 25 nm Operating Conditions Temperature 41 to 122 F (5 to 50 C) Humidity 10% to 90% Dimensions (HxWxD, maximum) 1.63 x 5.75 x 7.87 in (41.3 x 146 x 200 cm) Weight 2.64 lb (1.2 kg) DA North America Version 7 March 26, 2007 Page 21

22 Technical Specifications 4 port Embedded SATA controller SATA Protocol SATA Ports Port transfer rate Maximum Capacity SATA 1.5Gb/s 4 internal 1.5 Gb/s total up to 2 TB (4 x 500GB non hot plug SATA HDD) RAID Levels Supported RAID 1+0 (Striping & Mirroring) RAID 1 (Mirroring) RAID 0 (Striping) Logical RAID Volumes Supported Embedded NC320i PCIe Gigabit Server Adapter Network Interface Compatibility Data Transfer Method 10Base-T/100Base-TX/1000Base-TX IEEE Base-T IEEE 802.3ab 1000Base-T IEEE 802.3u 100Base-TX Single lane (x1), 100MHz PCI Express Reference Clock Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s Connector 10Base-T (Full-Duplex) 100Base-TX (Half- Duplex) 100Base-TX (Full- Duplex) 1000Base-TX (Half and Full-Duplex) RJ-45 connector 20 Mb/s 100 Mb/s 200 Mb/s 2000Mb/s Cable Support 10Base-T Categories 3, 4 or 5 UTP; up to 328 ft (100 m) 10/100/1000Base-TX Category 5 UTP; up to 328 ft (100 m) Copyright 2007 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less. DA North America Version 7 March 26, 2007 Page 22